nexen x-range fdx20-fgx35 (2.0t - 3.5t) diesel/lpg fork ...nexen x-range fdx2.0 . characteristics...
TRANSCRIPT
www.nexenlifttrucks.com
Nexen X-Range FDX20-FGX35 (2.0t - 3.5t)
Diesel/LPG Fork Lift
Specification Sheet
®
LIFT TRUCK TECHNOLOGY
NEXEN X-RANGE FDX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.0 FDX2.0 FDX2.0 FDX2.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3834 3798 3839 3878
2.2 Axle loading, laden, front/rear kg 4953 / 881 4935 / 863 4956 / 883 4976 / 902 2.3 Axle loading, unladen, front/rear kg 1778 / 2056 1759 / 2039 1780 / 2059 1801 / 2077
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.1/16.9 15.8/16.6 15.1/15.9 15.8/16.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 14616 / 13951
15694 / 13803
19168 / 13971
21564 / 14131
5.6 Max. drawbar pull, laden/unladen N 17850 / 13951
19156 / 13803
23505 / 13971
26443 / 14131
5.7 Gradeability, laden/unladen % 25.4/24.1 27.7/24 34.5/24.2 39.3/24.3 5.8 Max. gradeability, laden/unladen % 31.8/30.1 34.8/30 44/30.1 50.6/30.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.0 FDX2.0 FDX2.0 FDX2.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3804 3768 3809 3848
2.2 Axle loading, laden, front/rear kg 4938 / 866 4919 / 849 4940 / 869 4961 / 887 2.3 Axle loading, unladen, front/rear kg 1762 / 2042 1743 / 2025 1765 / 2044 1785 / 2063
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17.5/18.3 17.1/18 16.4/17.2 17.1/18 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13477 / 13827
14471 / 13680
17675 / 13848
19884 / 14008
5.6 Max. drawbar pull, laden/unladen N 16460 / 13827
17664 / 13680
21674 / 13848
24383 / 14008
5.7 Gradeability, laden/unladen % 23.4/24 25.5/23.9 31.6/24.1 36/24.2 5.8 Max. gradeability, laden/unladen % 29.2/30 31.9/30 40.1/30 46/30.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.0 FDX2.0 FDX2.0 FDX2.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3759 3723 3764 3803
2.2 Axle loading, laden, front/rear kg 4914 / 845 4895 / 828 4917 / 847 4937 / 866 2.3 Axle loading, unladen, front/rear kg 1738 / 2021 1720 / 2003 1741 / 2023 1761 / 2042
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.9/17.7 16.6/17.4 15.9/16.7 16.6/17.4 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13934 / 13643
14962 / 13495
18275 / 13663
20559 / 13823
5.6 Max. drawbar pull, laden/unladen N 17018 / 13643
18263 / 13495
22409 / 13663
25211 / 13823
5.7 Gradeability, laden/unladen % 24.5/23.9 26.7/23.8 33.2/23.9 37.7/24 5.8 Max. gradeability, laden/unladen % 30.6/30 33.4/29.9 42.2/30 48.4/30
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.0 FDX2.0 FDX2.0 FDX2.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3814 3778 3819 3858
2.2 Axle loading, laden, front/rear kg 4943 / 881 4924 / 854 4946 / 873 4966 / 892 2.3 Axle loading, unladen, front/rear kg 1757 / 2047 1748 / 2030 1770 / 2049 1790 / 2068
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 965 965 965 965 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 18.7/19.6 18.3/19.2 17.5/18.4 18.3/19.2 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 12609 / 13869
13539 / 13721
16536 / 13890
21564 / 14050
5.6 Max. drawbar pull, laden/unladen N 15399 / 13869
16526 / 13721
20277 / 13890
22812 / 14050
5.7 Gradeability, laden/unladen % 21.7/24.1 30.7/23.9 38.4/24.1 43.9/24.2 5.8 Max. gradeability, laden/unladen % 27/30.1 39.7/30 49.3/30.1 57.1/30.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.0 FGX2.0 FGX2.0 FGX2.0
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3765 3749 3766 3753
2.2 Axle loading, laden, front/rear kg 4917 / 848 4909 / 840 4918 / 848 4911 / 842 2.3 Axle loading, unladen, front/rear kg 1742 / 2023 1733 / 2016 1742 / 2024 1735 / 2018
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 14.5/15.2 17.8/18.6 14.5/15.2 17.8/18.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.62 0.55/0.62 0.55/0.62 0.55/0.62 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 14136 / 13667
14975 / 13602
20007 / 13672
18449 / 13617
5.6 Max. drawbar pull, laden/unladen N 17359 / 13667
18329 / 13602
22282 / 13672
20606 / 13617
5.7 Gradeability, laden/unladen % 24.8/23.9 26.5/23.9 36.8/23.9 33.6/23.9 5.8 Max. gradeability, laden/unladen % 31.3/30 33.4/30 41.9/30 38.2/30
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.0 FGX2.0 FGX2.0 FGX2.0
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3735 3719 3736 3723
2.2 Axle loading, laden, front/rear kg 4902 / 833 4893 / 826 4902 / 834 4895 / 828 2.3 Axle loading, unladen, front/rear kg 1726 / 2009 1717 / 2001 1726 / 2010 1719 / 2003
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.7/16.5 19.3/20.2 15.7/16.5 19.3/20.2 5.2 Lift speed, laden/unladen m/sec 0.55/0.62 0.55/0.62 0.55/0.62 0.55/0.62 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13035 / 13544
13808 / 13479
18448 / 13548
17012 / 13494
5.6 Max. drawbar pull, laden/unladen N 16007 / 13544
16901 / 13479
20547 / 13548
19000 / 13494
5.7 Gradeability, laden/unladen % 22.8/23.8 24.4/23.7 33.7/23.8 30.8/23.8 5.8 Max. gradeability, laden/unladen % 28.7/30 30.6/29.9 38.2/30 35/29.9
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.0 FGX2.0 FGX2.0 FGX2.0
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3690 3674 3691 3678
2.2 Axle loading, laden, front/rear kg 4878 / 812 4870 / 804 4879 / 812 4872 / 806 2.3 Axle loading, unladen, front/rear kg 1702 / 1988 1694 / 1980 1703 / 1988 1696 / 1982
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.2/15.9 18.6/19.6 15.2/15.9 18.6/19.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.62 0.55/0.62 0.55/0.62 0.55/0.62 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13478 / 13360
14277 / 13294
19074 / 13364
17589 / 13310
5.6 Max. drawbar pull, laden/unladen N 16550 / 13360
17475 / 13294
21244 / 13364
19645 / 13310
5.7 Gradeability, laden/unladen % 23.9/23.7 25.5/23.6 35.4/23.7 32.3/23.6 5.8 Max. gradeability, laden/unladen % 30/29.9 32.1/29.9 40.1/29.9 36.7/29.9
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.0 FGX2.0 FGX2.0 FGX2.0
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2000 2000 2000 2000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3745 3729 3746 3733
2.2 Axle loading, laden, front/rear kg 4907 / 838 4899 / 830 4907 / 839 4901 / 832 2.3 Axle loading, unladen, front/rear kg 1731 / 2014 1723 / 2006 1732 / 2014 1725 / 2008
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 965 965 965 965 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3571 3571 3571 3571 4.20 Length to face of forks l2 (mm) 2571 2571 2571 2571 4.21 Overall width, standard/wide/double b1/b2(mm) 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3911 3911 3911 3911 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3711 3711 3711 3711 4.35 Outer turning radius Wa (mm) 2241 2241 2241 2241 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17.2/18 20.6/21.6 17.5/18.4 20.6/21.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.62 0.55/0.62 0.55/0.62 0.55/0.62 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 15438 / 13586
16353 / 13520
21848 / 13590
20141 / 13537
5.6 Max. drawbar pull, laden/unladen N 18969 / 13586
20016 / 13520
23286 / 13590
22501 / 13537
5.7 Gradeability, laden/unladen % 27.5/23.8 29.4/23.8 41/23.8 37.4/23.8 5.8 Max. gradeability, laden/unladen % 34.7/30 37.1/30 44.4/30 42.7/30
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.1 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.5 FDX2.5 FDX2.5 FDX2.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 4073 4037 4078 4117
2.2 Axle loading, laden, front/rear kg 5699 / 874 5680 / 857 5701 / 876 5722 / 895 2.3 Axle loading, unladen, front/rear kg 1729 / 2344 1710 / 2327 1732 / 2346 1752 / 2365
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.1/16.9 15.8/16.6 15.1/15.9 15.8/16.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 14616 / 13570
15694 / 13422
19168 / 13590
21564 / 13750
5.6 Max. drawbar pull, laden/unladen N 17850 / 13570
19156 / 13422
23505 / 13590
26443 / 13750
5.7 Gradeability, laden/unladen % 22.3/20.5 24.2/20.4 30.1/20.5 34.2/20.7 5.8 Max. gradeability, laden/unladen % 27.8/27.2 30.3/27.2 38.1/27.2 43.6/27.3
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.5 FDX2.5 FDX2.5 FDX2.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 4043 4007 4048 4087
2.2 Axle loading, laden, front/rear kg 5683 / 860 5664 / 843 5686 / 862 5706 / 881 2.3 Axle loading, unladen, front/rear kg 1713 / 2329 1695 / 2312 1716 / 2332 1736 / 2350
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17.5/18.3 17.1/18 16.4/17.2 17.1/18 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13477 / 13447
14471 / 13299
17675 / 13467
19884 / 13627
5.6 Max. drawbar pull, laden/unladen N 16460 / 13447
17664 / 13299
21674 / 13467
24383 / 13627
5.7 Gradeability, laden/unladen % 20.5/20.4 22.3/20.3 27.6/20.4 31.3/20.6 5.8 Max. gradeability, laden/unladen % 25.5/27.2 27.8/27.1 34.8/27.2 39.7/27.3
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.5 FDX2.5 FDX2.5 FDX2.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3759 3723 4003 4042
2.2 Axle loading, laden, front/rear kg 4914 / 845 4895 / 828 5662 / 841 5683 / 859 2.3 Axle loading, unladen, front/rear kg 1738 / 2021 1720 / 2003 1692 / 2310 1713 / 2329
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.9/17.7 16.6/17.4 15.9/16.7 16.6/17.4 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13934 / 13262
14962 / 13114
18275 / 13282
20559 / 13442
5.6 Max. drawbar pull, laden/unladen N 17018 / 13262
18263 / 13114
22409 / 13282
25211 / 13442
5.7 Gradeability, laden/unladen % 21.4/20.3 23.3/20.1 28.9/20.3 32.8/20.4 5.8 Max. gradeability, laden/unladen % 26.7/27.1 29.1/27 36.5/27.1 41.7/27.2
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX2.5 FDX2.5 FDX2.5 FDX2.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 4053 4017 4058 4097
2.2 Axle loading, laden, front/rear kg 5688 / 865 5670 / 847 5691 / 867 5711 / 8886 2.3 Axle loading, unladen, front/rear kg 1719 / 2334 1700 / 2317 1721 / 2337 1742 / 2355
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 965 965 965 965 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 18.7/19.6 18.3/19.2 17.5/18.4 18.3/19.2 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 12609 / 13869
17138 / 13721
20932 / 13890
23549 / 14050
5.6 Max. drawbar pull, laden/unladen N 15399 / 13869
20919 / 13721
25667 / 13890
28876 / 14050
5.7 Gradeability, laden/unladen % 19.8/22 28/21.9 34.9/22 39.8/22.1 5.8 Max. gradeability, laden/unladen % 24.9/30.1 35.1/30 44.5/30.1 51.2/30.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.5 FGX2.5 FGX2.5 FGX2.5
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 4004 3988 4005 3992
2.2 Axle loading, laden, front/rear kg 5663 / 841 5654 / 834 5663 / 842 5656 / 835 2.3 Axle loading, unladen, front/rear kg 1693 / 2311 1685 / 2303 1693 / 2311 1687 / 2305
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 14.5/15.2 17.8/18.6 14.5/15.2 17.8/18.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 14136 / 13286
14975 / 13221
20007 / 13291
18449 / 13236
5.6 Max. drawbar pull, laden/unladen N 17359 / 13286
18329 / 13221
22282 / 13291
20606 / 13236
5.7 Gradeability, laden/unladen % 21.7/20.3 23.2/20.2 32/20.3 29.3/20.2 5.8 Max. gradeability, laden/unladen % 27.3/27.1 29.1/27.1 36.3/27.1 33.2/27.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.5 FGX2.5 FGX2.5 FGX2.5
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3974 3958 3975 3962
2.2 Axle loading, laden, front/rear kg 5647 / 827 5639 / 819 5648 / 827 5641 / 821 2.3 Axle loading, unladen, front/rear kg 1677 / 2297 1669 / 2289 1678 / 2297 1671 / 2291
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.7/16.5 19.3/20.2 15.7/16.5 19.3/20.2 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13035 / 13163
13808 / 13098
18448 / 13167
17012 / 13113
5.6 Max. drawbar pull, laden/unladen N 16007 / 13163
16901 / 13098
20547 / 13167
19000 / 13113
5.7 Gradeability, laden/unladen % 20/20.2 21.3/20.1 29.4/20.2 26.9/20.1 5.8 Max. gradeability, laden/unladen % 25/27.1 26.7/27 33.2/27.1 30.4/27
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.5 FGX2.5 FGX2.5 FGX2.5
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3929 3913 3930 3917
2.2 Axle loading, laden, front/rear kg 5623 / 805 5615 / 798 5624 / 806 5617 / 800 2.3 Axle loading, unladen, front/rear kg 1654 / 2275 1645 / 2267 1654 / 2276 1647 / 2269
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 960 960 960 960 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 1134 / 1260 / 1482 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.2/15.9 18.6/19.6 15.2/15.9 18.6/19.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 13478 / 12979
14277 / 12913
19074 / 12983
17589 / 12929
5.6 Max. drawbar pull, laden/unladen N 16550 / 12979
17475 / 12913
21244 / 12983
19645 / 12929
5.7 Gradeability, laden/unladen % 20.9/20 22.3/20 30.7/20 28.1/20 5.8 Max. gradeability, laden/unladen % 26.2/27 27.9/26.9 34.8/27 31.9/27
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX2.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX2.5 FGX2.5 FGX2.5 FGX2.5
Model – Manufacturer designation X-range X-range X-range X-range Engine Nissan K21 GM 2.0L Nissan K25 GM 2.4L Transmission OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 2500 2500 2500 2500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 470 470 470 470 1.9 Wheelbase y (mm) 1650 1650 1650 1650
WEI
GH
TS 2.1 Service weight kg 3984 3968 3985 3972
2.2 Axle loading, laden, front/rear kg 5652 / 832 5644 / 824 5653 / 832 5646 / 826 2.3 Axle loading, unladen, front/rear kg 1683 / 2301 1674 / 2294 1683 / 2302 1677 / 2295
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 7.00-12-12 P.R. 3.3 Tyre size, rear 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 6.00-9-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 965 965 965 965 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 1995 1995 1995 1995 4.3 Free lift h2 (mm) 110 110 110 110 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2140 2140 2140 2140 4.8 Seat height / stand height h7 (mm) 1140 1140 1140 1140
4.12 Coupling height h10 (mm) 352 352 352 352 4.19 Overall length l1 (mm) 3611 3611 3611 3611 4.20 Length to face of forks l2 (mm) 2611 2611 2611 2611 4.21 Overall width, standard/wide/double b1/b2(mm) 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 1139 / 1265 / 1487 4.22 Fork dimensions s/e/l (mm) 40/125/1000 40/125/1000 40/125/1000 40/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIA IIA IIA IIA 4.24 Fork carriage width b3 (mm) 1020 1020 1020 1020 4.31 Ground clearance, laden, below mast m1 (mm) 110 110 110 110 4.32 Ground clearance, centre of wheelbase m2 (mm) 160 160 160 160 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 3950 3950 3950 3950 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3750 3750 3750 3750 4.35 Outer turning radius Wa (mm) 2280 2280 2280 2280 4.36 Inner turning radius b13 (mm) 46 46 46 46
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17.2/18 20.6/21.6 17.5/18.4 20.6/21.6 5.2 Lift speed, laden/unladen m/sec 0.55/0.65 0.55/0.65 0.55/0.65 0.55/0.65 5.3 Lowering speed, laden/unladen m/sec 0.47/0.44 0.47/0.44 0.47/0.44 0.47/0.44
5.5 Drawbar pull, laden/unladen N 15438 / 13586
16353 / 13520
21848 / 13590
20147 / 13537
5.6 Max. drawbar pull, laden/unladen N 18969 / 13586
20016 / 13520
23286 / 13590
22501 / 13537
5.7 Gradeability, laden/unladen % 25/21.7 26.8/21.7 37.2/21.7 33.9/21.7 5.8 Max. gradeability, laden/unladen % 31.6/30 33.7/30 40.1/30 38.6/30
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 7.3 Rated speed rpm 2250 2700 2300 2700 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.0 FDX3.0 FDX3.0 FDX3.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4643 4607 4648 4687
2.2 Axle loading, laden, front/rear kg 6688 / 955 6669 / 938 6691 / 958 6712 / 976 2.3 Axle loading, unladen, front/rear kg 1906 / 2738 1887 / 2721 1909 / 2740 1929 / 2758
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17.4/18.3 17.1/17.9 16.4/17.2 17.1/17.9 5.2 Lift speed, laden/unladen m/sec 0.42/0.54 0.42/0.54 0.42/0.54 0.42/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 13516 / 14957
14513 / 14807
17726 / 14978
19942 / 15141
5.6 Max. drawbar pull, laden/unladen N 16508 / 14957
17715 / 14807
21737 / 14978
24454 / 15141
5.7 Gradeability, laden/unladen % 17.3/19.4 18.8/19.2 23.3/19.4 26.4/19.5 5.8 Max. gradeability, laden/unladen % 21.6/26.2 23.4/26.2 29.3/26.2 33.3/26.3
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.0 FDX3.0 FDX3.0 FDX3.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4613 4577 4618 4657
2.2 Axle loading, laden, front/rear kg 6672 / 941 6653 / 924 6675 / 943 6696 / 962 2.3 Axle loading, unladen, front/rear kg 1890 / 2724 1871 / 2707 1893 / 2726 1913 / 2744
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 18.9/19.8 18.5/19.4 17.7/18.6 18.5/19.4 5.2 Lift speed, laden/unladen m/sec 0.42/0.54 0.42/0.54 0.42/0.54 0.42/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12463 / 14832
13383 / 14682
16345 / 14853
18389 / 15016
5.6 Max. drawbar pull, laden/unladen N 15222 / 14832
16335 / 14682
20044 / 14853
22549 / 15016
5.7 Gradeability, laden/unladen % 15.9/19.3 17.3/19.1 21.4/19.3 24.2/19.4 5.8 Max. gradeability, laden/unladen % 19.8/26.2 21.5/26.1 26.8/26.2 30.5/26.3
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.0 FDX3.0 FDX3.0 FDX3.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 3998 3962 4573 4612
2.2 Axle loading, laden, front/rear kg 5660 / 838 5641 / 821 6651 / 922 6672 / 941 2.3 Axle loading, unladen, front/rear kg 1690 / 2308 1671 / 2291 1869 / 2705 1889 / 2723
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 18.3/19.2 17.9/18.8 17.2/18 17.9/18.8 5.2 Lift speed, laden/unladen m/sec 0.42/0.54 0.42/0.54 0.42/0.54 0.42/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12886 / 14644
13837 / 14494
16900 / 14665
19013 / 14828
5.6 Max. drawbar pull, laden/unladen N 15738 / 14644
16890 / 14494
20724 / 14665
23314 / 14828
5.7 Gradeability, laden/unladen % 16.6/19.1 18.1/19 22.4/19.1 25.3/19.3 5.8 Max. gradeability, laden/unladen % 20.7/26.1 22.5/26 28/26.1 31.9/26.2
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.0 FDX3.0 FDX3.0 FDX3.0
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4623 4587 4628 4667
2.2 Axle loading, laden, front/rear kg 6677 / 946 6665 / 922 6687 / 941 6708 / 959 2.3 Axle loading, unladen, front/rear kg 1895 / 2728 1883 / 2704 1905 / 2723 1926 / 2741
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1005 1005 1005 1005 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.8/17.7 16.5/17.3 15.8/16.6 16.5/17.3 5.2 Lift speed, laden/unladen m/sec 0.42/0.54 0.42/0.54 0.42/0.54 0.42/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 17700 / 13650
19006 / 13498
23213 / 13671
26115 / 13835
5.6 Max. drawbar pull, laden/unladen N 21617 / 13650
23198 / 13498
28465 / 13671
32023 / 13835
5.7 Gradeability, laden/unladen % 23.9/18 26/17.8 32.4/18 36.9/18.1 5.8 Max. gradeability, laden/unladen % 29.9/24.7 32.5/24.6 41.1/24.7 47.2/24.8
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.0 FGX3.0 FGX3.0 FGX3.0 FGX3.0
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission NYT NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS
2.1 Service weight kg 4574 4558 4575 4562 4588 2.2 Axle loading, laden, front/rear kg 6652 / 923 6643 / 915 6652 / 923 6645 / 917 6659 / 929
2.3 Axle loading, unladen, front/rear kg 1869 / 2705
1861 / 2698
1870 / 2706
1863 / 2700
1877 / 2712
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000
4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.6/16.4 19.2/20.2 15.6/16.4 19.2/20.2 21.3/22.4 5.2 Lift speed, laden/unladen m/sec 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 13073 / 14669
13849 / 14602
18502 / 14673
17062 / 14618
20164 / 14728
5.6 Max. drawbar pull, laden/unladen N 16053 / 14669
16951 / 14602
20607 / 14673
19056 / 14618
22457 / 14728
5.7 Gradeability, laden/unladen % 16.9/19.1 18/19.1 24.7/19.1 22.6/19.1 27.1/19.2 5.8 Max. gradeability, laden/unladen % 21.1/26.1 22.5/26.1 27.9/26.1 25.6/26.1 30.6/26.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000
7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.0 FGX3.0 FGX3.0 FGX3.0 FGX3.0
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission NNT NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS
2.1 Service weight kg 4544 4528 4545 4532 4558 2.2 Axle loading, laden, front/rear kg 6636 / 909 6627 / 901 6636 / 909 6629 / 903 6643 / 915
2.3 Axle loading, unladen, front/rear kg 1853 / 2691
1845 / 2684
1854 / 2692
1847 / 2686
1861 / 2698
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17/17.8 20.8/21.9 17/17.8 20.8/21.9 23.1/24.3 5.2 Lift speed, laden/unladen m/sec 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12055 / 14544
12770 / 14477
17061 / 14548
15732 / 14493
18593 / 14602
5.6 Max. drawbar pull, laden/unladen N 14803 / 14544
15630 / 14477
19001 / 14548
17571 / 14493
20708 / 14602
5.7 Gradeability, laden/unladen % 15.5/19 16.6/19 22.7/19 20.8/19 24.9/19.1 5.8 Max. gradeability, laden/unladen % 19.4/26 20.7/26 25.6/26 23.5/26 28.1/26.1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000
7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.0 FGX3.0 FGX3.0 FGX3.0 FGX3.0
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission SNT SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS
2.1 Service weight kg 4499 4483 4500 4487 4513 2.2 Axle loading, laden, front/rear kg 6612 / 888 6603 / 880 6612 / 888 6605 / 882 6619 / 894
2.3 Axle loading, unladen, front/rear kg 1829 / 2670
1821 / 2663
1830 / 2671
1823 / 2664
1837 / 2677
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.4/17.2 20.1/21.1 16.4/17.2 20.1/21.1 22.4/23.5 5.2 Lift speed, laden/unladen m/sec 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12464 / 14356
13203 / 14289
17640 / 14360
16267 / 14305
19224 / 14414
5.6 Max. drawbar pull, laden/unladen N 15305 / 14356
16161 / 14289
19646 / 14360
18168 / 14305
21411 / 14414
5.7 Gradeability, laden/unladen % 16.2/18.9 17.3/18.8 23.7/18.9 21.7/18.9 26/18.9 5.8 Max. gradeability, laden/unladen % 20.3/25.9 21.6/25.9 26.7/25.9 24.5/25.9 29.4/26
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000
7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.0
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.0 FGX3.0 FGX3.0 FGX3.0 FGX3.0
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission OKA OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3000 3000 3000 3000 3000 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS
2.1 Service weight kg 4554 4538 4555 4542 4542 2.2 Axle loading, laden, front/rear kg 6640 / 914 6639 / 899 6646 / 907 6641 / 901 6841 / 701
2.3 Axle loading, unladen, front/rear kg 1858 / 2696
1857 / 2681
1866 / 2689
1859 / 2683
2059 / 2483
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3000 3000 3000 3000 4.5 Height, mast extended h4 (mm) 4220 4220 4220 4220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1168 1168 1168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3751 3751 3751 3751 3751 4.20 Length to face of forks l2 (mm) 2751 2751 2751 2751 2751 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000
4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4084 4084 4084 4084 4084 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3884 3884 3884 3884 3884 4.35 Outer turning radius Wa (mm) 2374 2374 2374 2374 2374 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.5/16.2 18.6/19.5 15.8/16.6 18.6/19.5 20.6 / 21.7 5.2 Lift speed, laden/unladen m/sec 0.41/0.54 0.41/0.54 0.41/0.54 0.41/0.54 0.55 / 0.65 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.47 / 0.44
5.5 Drawbar pull, laden/unladen N 17120 / 14614
18136 / 14548
24229 / 14618
22343 / 14566
26405 / 16160
5.6 Max. drawbar pull, laden/unladen N 21037 / 14614
22197 / 14548
25229 / 14618
22343 / 14566
29451 / 16160
5.7 Gradeability, laden/unladen % 22.7/19.1 24.3/19.1 33.6/19.1 30.7/19.1 37.2 / 21.4 5.8 Max. gradeability, laden/unladen % 28.6/26.1 30.5/26.1 36.2/26.1 34.8/26.1 42.4 / 29.3
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000
7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.5 FDX3.5 FDX3.5 FDX3.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4962 4926 4967 5006
2.2 Axle loading, laden, front/rear kg 7380 / 1081 7361 / 1064 7383 / 1084 7404 / 1102 2.3 Axle loading, unladen, front/rear kg 1801 / 3161 1782 / 3144 1804 / 3163 1824 / 3181
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17.4/18.3 17.1/17.9 16.4/17.2 17.1/17.9 5.2 Lift speed, laden/unladen m/sec 0.41/0.45 0.41/0.45 0.41/0.45 0.41/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 13516 / 14135
14513 / 13984
17726 / 14156
19942 / 14319
5.6 Max. drawbar pull, laden/unladen N 16508 / 14135
17715 / 13984
21737 / 14156
24454 / 14319
5.7 Gradeability, laden/unladen % 15.5/16.3 16.8/16.2 20.8/16.3 23.6/16.4 5.8 Max. gradeability, laden/unladen % 19.3/22.9 20.9/22.8 26.1/22.9 29.7/23
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.5 FDX3.5 FDX3.5 FDX3.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4932 4896 4937 4976
2.2 Axle loading, laden, front/rear kg 7365 / 1067 7345 / 1050 7367 / 1070 7388 / 1088 2.3 Axle loading, unladen, front/rear kg 1785 / 3147 1766 / 3130 1788 / 3149 1809 / 3167
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 18.9/19.8 18.5/19.4 17.7/18.6 18.5/19.4 5.2 Lift speed, laden/unladen m/sec 0.41/0.45 0.41/0.45 0.41/0.45 0.41/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12463 / 14010
13383 / 13859
16345 / 14030
18389 / 14193
5.6 Max. drawbar pull, laden/unladen N 15222 / 14010
16335 / 13859
20044 / 14030
22549 / 14193
5.7 Gradeability, laden/unladen % 14.2/16.2 15.5/16.1 19.1/16.2 21.7/16.3 5.8 Max. gradeability, laden/unladen % 17.7/22.8 19.2/22.7 24/22.8 27.2/22.9
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.5 FDX3.5 FDX3.5 FDX3.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4887 4851 4892 4931
2.2 Axle loading, laden, front/rear kg 7341 / 1046 7321 / 1029 7343 / 1049 7364 / 1067 2.3 Axle loading, unladen, front/rear kg 1761 / 3126 1742 / 3109 1764 / 3128 1785 / 3146
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 1242 / 1388 / 1692 4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 18.3/19.2 17.9/18.8 17.2/18 17.9/18.8 5.2 Lift speed, laden/unladen m/sec 0.41/0.45 0.41/0.45 0.41/0.45 0.41/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12886 / 13822
13837 / 13671
16900 / 13842
19013 / 14005
5.6 Max. drawbar pull, laden/unladen N 15738 / 13822
16890 / 13671
20724 / 13842
23314 / 14005
5.7 Gradeability, laden/unladen % 14.9/16 16.1/15.9 20/16.1 22.6/16.2 5.8 Max. gradeability, laden/unladen % 18.5/22.7 20.1/22.6 25/22.7 28.4/22.8
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FDX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FDX3.5 FDX3.5 FDX3.5 FDX3.5
Model – Manufacturer designation X-range X-range X-range X-range
Engine Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
Transmission OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Diesel Diesel Diesel Diesel
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4942 4906 4947 4986
2.2 Axle loading, laden, front/rear kg 7370 / 1072 7351 / 1055 7373 / 1074 7393 / 1093 2.3 Axle loading, unladen, front/rear kg 1791 / 3151 1771 / 3135 1793 / 3154 1814 / 3172
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L 3.2 Tyre size, front 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 8.15-15-12 P.R. 3.3 Tyre size, rear 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 6.50-10-10 P.R. 3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1005 1005 1005 1005 3.7 Tread, rear b11 (mm) 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1232 / 1378 / 1682 1232 / 1378 / 1682 1232 / 1378 / 1682 1232 / 1378 / 1682
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.8 / 17.7 16.5 / 17.3 15.8 / 16.6 16.5 / 17.3 5.2 Lift speed, laden/unladen m/sec 0.42 / 0.54 0.42 / 0.54 0.42 / 0.54 0.42 / 0.54 5.3 Lowering speed, laden/unladen m/sec 0.45 / 0.42 0.45 / 0.42 0.45 / 0.42 0.45 / 0.42
5.5 Drawbar pull, laden/unladen N 17700 / 14053
19006 / 13902
23213 / 14074
26115 / 14237
5.6 Max. drawbar pull, laden/unladen N 21617 / 14053
23198 / 13902
28465 / 14074
32023 / 14237
5.7 Gradeability, laden/unladen % 20.9 / 16.2 22.7 / 16.1 28.2 / 16.2 32 / 16.4 5.8 Max. gradeability, laden/unladen % 26 / 22.8 28.3 / 22.8 35.6 / 22.9 40.7 / 22.9
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E
7.1 Engine manufacturer/type Yanmar 4TNE92
Kubota V2403
Yanmar 4TNE98
Kubota V3600
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 32.8 34.1 42.1 48.6 7.3 Rated speed rpm 2450 2400 2300 2400 7.4 Number of cylinders/displacement cm3 4 / 2659 4 / 2434 4 / 3319 4 / 3620
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.5 FGX3.5 FGX3.5 FGX3.5 FGX3.5
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission NYT NYT NYT NYT NYT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4893 4877 4894 4881 4907
2.2 Axle loading, laden, front/rear kg 7344 / 1049
7335 / 1042
7344 / 1050
7337 / 1043
7351 / 1056
2.3 Axle loading, unladen, front/rear kg 1764 / 3128
1756 / 3121
1765 / 3129
1758 / 3123
1772 / 3135
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.6/16.4 19.2/20.2 15.6/16.4 19.2/20.2 21.3/22.4 5.2 Lift speed, laden/unladen m/sec 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 13073 / 13847
13849 / 13780
18502 / 13851
17062 / 13796
20164 / 13905
5.6 Max. drawbar pull, laden/unladen N 16053 / 13847
16951 / 13780
20607 / 13851
19056 / 13796
22457 / 13905
5.7 Gradeability, laden/unladen % 15.1/16.1 16.1/16 22.1/16.1 20.2/16 24.2/16.1 5.8 Max. gradeability, laden/unladen % 18.9/22.7 20.1/22.7 24.8/22.7 22.8/22.7 27.3/22.8
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.5 FGX3.5 FGX3.5 FGX3.5 FGX3.5
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission NNT NNT NNT NNT NNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4863 4847 4864 4851 4877
2.2 Axle loading, laden, front/rear kg 7328 / 1035
7319 / 1028
7328 / 1035
7321 / 1029
7335 / 1042
2.3 Axle loading, unladen, front/rear kg 1748 / 3114
1740 / 3107
1749 / 3115
1742 / 3109
1756 / 3121
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 17/17.8 20.8/21.9 17/17.8 20.8/21.9 23.1/24.3 5.2 Lift speed, laden/unladen m/sec 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12055 / 13721
12770 / 13654
17061 / 13725
15732 / 13670
18593 / 13780
5.6 Max. drawbar pull, laden/unladen N 14803 / 13721
15630 / 13654
19001 / 13725
17571 / 13670
20708 / 13780
5.7 Gradeability, laden/unladen % 13.9/16 14.8/15.9 20.3/16 18.6/15.9 22.2/16 5.8 Max. gradeability, laden/unladen % 17.3/22.6 18.4/22.6 22.8/22.6 21/22.6 25/22.7
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.5 FGX3.5 FGX3.5 FGX3.5 FGX3.5
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission SNT SNT SNT SNT SNT
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4818 4802 4819 4806 4832
2.2 Axle loading, laden, front/rear kg 7304 / 1014
7295 / 1007
7304 / 1014
7297 / 1008
7311 / 1021
2.3 Axle loading, unladen, front/rear kg 1724 / 3093
1716 / 3086
1725 / 3094
1718 / 3088
1732 / 3100
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1010 1010 1010 1010 1010 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 3 000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4 220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168 1 168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 16.4/17.2 20.1/21.1 16.4/17.2 20.1/21.1 22.4/23.5 5.2 Lift speed, laden/unladen m/sec 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 12464 / 13533
13203 / 13466
17640 / 13537
16267 / 13482
19224 / 13592
5.6 Max. drawbar pull, laden/unladen N 15305 / 13533
16161 / 13466
19646 / 13537
18168 / 13482
21411 / 13592
5.7 Gradeability, laden/unladen % 14.5/15.8 15.4/15.8 21.1/15.8 19.4/15.8 23.2/15.9 5.8 Max. gradeability, laden/unladen % 18.1/22.5 19.2/22.5 23.8/22.5 21.9/22.5 26.1/22.6
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000
7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
NEXEN X-RANGE FGX3.5
CH
AR
AC
TER
ISTI
CS
1.1 Manufacturer NEXEN NEXEN NEXEN NEXEN NEXEN 1.2 Model designation FGX3.5 FGX3.5 FGX3.5 FGX3.5 FGX3.5
Model – Manufacturer designation X-range X-range X-range X-range X-range
Engine Nissan K21 GM 2.0L Nissan
K25 GM 2.4L GM 3.0L
Transmission OKA OKA OKA OKA OKA
1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas LPG LPG LPG LPG LPG
1.4 Operation: hand, pedestrian, standing, seated, order-picker Seated Seated Seated Seated Seated
1.5 Load capacity / rated load Q (kg) 3500 3500 3500 3500 3500 1.6 Load centre distance c (mm) 500 500 500 500 500 1.8 Load distance, centre of drive axle to fork x (mm) 510 510 510 510 510 1.9 Wheelbase y (mm) 1700 1700 1700 1700 1700
WEI
GH
TS 2.1 Service weight kg 4873 4857 4874 4861 4887
2.2 Axle loading, laden, front/rear kg 7406 / 967
7404 / 953
7414 / 960
7407 / 954
7653 / 734
2.3 Axle loading, unladen, front/rear kg 1826 / 3047
1825 / 3032
1834 / 3040
1827 / 3034
2074 / 2813
WH
EE
LS &
TY
RE
S
3.1 Tyres: L=pneumatic, V=solid L L L L L 3.2 Tyre size, front 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R. 8.15-15-12
P.R.
3.3 Tyre size, rear 6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
6.50-10-10 P.R.
3.5 Wheels, number front rear (X=driven wheels) 2x / 2 2x / 2 2x / 2 2x / 2 2x / 2 3.6 Tread, front b10 (mm) 1005 1005 1005 1005 1005 3.7 Tread, rear b11 (mm) 959 959 959 959 959
DIM
EN
SIO
NS
4.1 Mast tilt, α = forward / β = back ( base duplex mast) degrees 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 4.2 Height of mast, lowered h1 (mm) 2120 2120 2120 2120 2120 4.3 Free lift h2 (mm) 140 140 140 140 140 4.4 Lift h3 (mm) 3000 3 000 3 000 3 000 3000 4.5 Height, mast extended h4 (mm) 4220 4 220 4 220 4 220 4220 4.7 Height of overhead guard (cabin) h6 (mm) 2168 2168 2168 2168 2168 4.8 Seat height / stand height h7 (mm) 1168 1 168 1 168 1 168 1168
4.12 Coupling height h10 (mm) 380 380 380 380 380 4.19 Overall length l1 (mm) 3801 3801 3801 3801 3801 4.20 Length to face of forks l2 (mm) 2801 2801 2801 2801 2801 4.21 Overall width, standard/double b1/b2(mm) 1242 / 1388 /
1692 1242 / 1388 /
1692 1242 / 1388 / 1692 1242 / 1388 /
1692 1242 / 1388 / 1692
4.22 Fork dimensions s/e/l (mm) 50/125/1000 50/125/1000 50/125/1000 50/125/1000 50/125/1000 4.23 Fork carriage DIN 15173, class/type A,B IIIA IIIA IIIA IIIA IIIA 4.24 Fork carriage width b3 (mm) 1150 1150 1150 1150 1150 4.31 Ground clearance, laden, below mast m1 (mm) 150 150 150 150 150 4.32 Ground clearance, centre of wheelbase m2 (mm) 188 188 188 188 188 4.33 Aisle width for pallets 1000x1200 crossways Ast (mm) 4124 4124 4124 4124 4124 4.34 Aisle width for pallets 800x1200 crossways Ast (mm) 3924 3924 3924 3924 3924 4.35 Outer turning radius Wa (mm) 2414 2414 2414 2414 2414 4.36 Inner turning radius b13 (mm) 32 32 32 32 32
PE
RFO
RM
AN
CE
5.1 Travel speed, laden/unladen km/h 15.5/16.2 18.6/19.5 15.8/16.6 18.6/19.5 20.6/21.7 5.2 Lift speed, laden/unladen m/sec 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 0.40/0.45 5.3 Lowering speed, laden/unladen m/sec 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42 0.45/0.42
5.5 Drawbar pull, laden/unladen N 17120 / 14334
18136 / 14323
24229 / 14395
22343 / 14341
26405 / 16274
5.6 Max. drawbar pull, laden/unladen N 21037 / 14334
22197 / 14323
25824 / 14395
24954 / 14341
29451 / 16274
5.7 Gradeability, laden/unladen % 20.3/16.7 21.7/16.7 29.9/16.8 27.3/16.8 32.9 / 19.2 5.8 Max. gradeability, laden/unladen % 25.5/23.7 27.1/23.8 32.1/23.8 30.9/23.8 37.3 / 27.2
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
EN
GIN
E 7.1 Engine manufacturer/type Nissan K21 GM 2.0L Nissan K25 GM 2.4L GM 3.0L
7.2 Engine power acc. to ISO 1585 / DIN 6271 kW 31.2 42 37.4 52 54 7.3 Rated speed rpm 2250 2700 2300 2700 3000 7.4 Number of cylinders/displacement cm3 4 / 2065 4 / 2000 4 / 2488 4 / 2405 4 / 2967
OTH
ER
8.1 Type of drive control Automatic Automatic Automatic Automatic Automatic 8.2 Operating pressure for attachments bar 0 -155 0 -155 0 -155 0 -155 0 -155 8.3 Oil volume for attachments l/min 69 69 69 69 69 8.4 Average noise level at operator’s ear (Lpaz) dB (A)
Guaranteed sound power 2001/14/EC (Lwaz)) dB 8.5 Towing coupling, type DIN Pin Pin Pin Pin Pin
Specification data according to VDI 2198
Y-RANGE MASTS: MAST AND CAPACITY INFORMATION
All values below correspond to standard equipment. Please contact your Nexen local dealer if mounting any non-standard equipment.
Type Max fork height,
mm
Masts FDX2.0, FGX2.0, FDX2.5, FGX2.5 Masts FDX3.0, FGX3.0, FDX3.5, FGX3.5 Overall heights, mm Free lift, mm Tilt range, ° Overall heights, mm Free lift, mm Tilt range, ° Lowered Extended FWD BWD Lowered Extended FWD BWD
DU
: 2s
tage
–
sim
plex
3000 2000 3936 150 6 12 2000 3936 150 6 12 3300 2160 4236 100 6 12 2160 4236 100 6 12 4000 2500 4936 150 6 6 2500 4936 150 6 6 4500 2750 5436 150 6 6 2750 5436 150 6 6 5000 3100 5936 150 6 6 3100 5936 150 6 6
DF:
2s
tage
fu
ll FL
- du
plex
3000 2000 3936 1500 6 12 2000 3936 1500 6 12
3300 2160 4236 1650 6 12 2160 4236 1650 6 12
TF: 3
stag
e -
tripl
ex
4500 2100 5436 1500 6 6 2100 5436 1500 6 6 4700 2160 5636 1580 6 6 2160 5636 1580 6 6 4800 2160 5736 1600 6 6 2160 5736 1600 6 6 5000 2250 5936 1650 6 6 2250 5936 1650 6 6 5500 2550 6436 1850 6 6 2550 6436 1850 6 6 6000 2500 6936 2000 6 6 2500 6936 2000 6 6
CAPACITY CHART IN KG FOR SINGLE TYRES AT 500MM LOAD CENTRE – CALCULATED VALUES
Type Max fork height,
mm
Pneumatic Tyres Pneumatic Shaped Solid Tyres Without sideshift With integral sideshift With hook on sideshift Without sideshift With integral sideshift With hook on sideshift
FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5
2sta
ge –
si
mpl
ex
3000 2000 2500 3000 3500 2000 2500 2969 3436 2000 2489 2934 3396 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3500 3300 2000 2483 2951 3421 2000 2412 2863 3319 2000 2387 2830 3281 2000 2500 3000 3500 2000 2500 2976 3447 2000 2483 2940 3406 4000 1944 2239 2702 3145 1893 2179 2626 3056 1874 2158 2598 3023 2000 2347 2830 3290 1984 2282 2747 3194 1964 2259 2716 3158 4500 1792 2073 2533 2957 1747 2020 2464 2878 1730 2001 2439 2848 1891 2183 2665 3108 1840 2125 2590 3020 1822 2105 2561 2987 5000 1646 1913 2369 2777 1606 1867 2308 2705 1591 1850 2285 2678 1745 2025 2505 2932 1701 1973 2437 2852 1685 1955 2411 2822
2sta
ge
full
FL -
dupl
ex 3000
2000 2500 3000 3500 2000 2472 2961 3427 2000 2446 2926 3387 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3500
3300 2000 2442 2941 3410 2000 2373 2854 3309 2000 2348 2821 3271 2000 2500 3000 3500 2000 2471 2966 3436 2000 2444 2931 3396
3st
age
- trip
lex 4500 1758 2041 2524 2951 1713 1989 2455 2871 1697 1970 2430 2841 1859 2155 2657 3103 1809 2097 2582 3015 1791 2076 2554 2982
4700 1698 1976 2458 2878 1655 1926 2393 2802 1639 1908 2368 2773 1799 2090 2593 3032 1752 2035 2521 2947 1735 2015 2493 2916 4800 1641 1917 2400 2817 1600 1869 2337 2743 1585 1852 2313 2715 1743 2032 2536 2972 1698 1979 2466 2890 1681 1959 2440 2859 5000 1612 1883 2365 2775 1572 1836 2303 2703 1558 1820 2280 2675 1714 1997 2501 2931 1670 1946 2433 2851 1654 1928 2407 2821 5500 1500 1759 2239 2634 1464 1717 2182 2568 1452 1702 2161 2543 1602 1874 2378 2792 1563 1828 2315 2718 1549 1811 2291 2691 6000 1397 1645 2123 2503 1365 1608 2071 2443 1354 1594 2052 2420 1499 1760 2263 2663 1464 1718 2206 2595 1451 1703 2184 2570
CAPACITY CHART IN KG FOR WIDE TREAD TYRES AT 500MM LOAD CENTRE – CALCULATED VALUES
Type Max fork height,
mm
Pneumatic Wide Tread Tyres Pneumatic Shaped Solid Wide Tread Tyres Without sideshift With integral sideshift With hook on sideshift Without sideshift With integral sideshift With hook on sideshift
FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5
2sta
ge –
si
mpl
ex
3000 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 2992 3463 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3500 3300 2000 2500 3000 3496 2000 2467 2926 3390 2000 2440 2891 3350 2000 2500 3000 3500 2000 2500 3000 3476 2000 2500 2965 3434 4000 1998 2299 2773 3225 1943 2236 2693 3133 1924 2214 2663 3098 2000 2372 2858 3323 2000 2305 2774 3225 1984 2282 2742 3188 4500 1846 2134 2605 3040 1798 2078 2533 2956 1781 2058 2506 2925 1913 2208 2694 3142 1861 2149 2618 3052 1843 2128 2589 3019 5000 1700 1975 2444 2862 1658 1926 2379 2786 1643 1908 2354 2758 1767 2050 2535 2966 1722 1997 2466 2885 1706 1979 2440 2854
2sta
ge
full
FL -
dupl
ex 3000 2000 2500 3000 3500 2000 2500 3000 3495 2000 2496 2984 3453 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3500
3300 2000 2500 3000 3485 2000 2427 2916 3379 2000 2401 2882 3340 2000 2500 3000 3500 2000 2493 2991 3465 2000 2466 2955 3423
3st
age
- trip
lex 4500 1813 2104 2597 3034 1766 2049 2525 2950 1749 2029 2498 2919 1881 2180 2687 3137 1830 2121 2610 3047 1812 2100 2581 3013
4700 1754 2039 2532 2963 1708 1986 2463 2882 1692 1967 2437 2852 1822 2116 2623 3067 1773 2059 2549 2980 1756 2039 2522 2948 4800 1697 1980 2475 2903 1654 1929 2408 2824 1638 1911 2383 2794 1766 2057 2567 3007 1720 2003 2495 2923 1703 1984 2468 2891 5000 1668 1946 2440 2861 1626 1897 2375 2784 1611 1879 2350 2755 1737 2023 2532 2966 1692 1971 2462 2884 1676 1952 2436 2853 5500 1556 1822 2315 2721 1519 1778 2255 2651 1505 1762 2233 2624 1625 1900 2409 2828 1585 1852 2345 2752 1570 1835 2321 2724 6000 1453 1708 2200 2591 1420 1668 2145 2527 1407 1654 2125 2502 1522 1786 2295 2699 1486 1743 2236 2630 1473 1728 2214 2604
CAPACITY CHART IN KG FOR DOUBLE TYRES AT 500MM LOAD CENTRE – CALCULATED VALUES
Type Max fork height,
mm
Pneumatic Double Tyres Pneumatic Shaped Solid Double Tyres Without sideshift With integral sideshift With hook on sideshift Without sideshift With integral sideshift With hook on sideshift
FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5
2sta
ge –
si
mpl
ex
3000 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3478 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3500 3300 2000 2500 3000 3500 2000 2479 2940 3406 2000 2452 2905 3366 2000 2500 3000 3500 2000 2500 3000 3485 2000 2500 2972 3443 4000 2000 2313 2789 3243 1955 2249 2708 3150 1935 2227 2678 3115 2000 2379 2867 3333 2000 2312 2782 3234 1990 2288 2750 3197 4500 1859 2148 2622 3059 1810 2092 2549 2974 1793 2071 2522 2942 1919 2216 2703 3152 1868 2156 2626 3062 1849 2135 2597 3028 5000 1713 1989 2461 2882 1670 1939 2395 2805 1655 1921 2370 2776 1774 2057 2544 2977 1728 2004 2474 2895 1712 1986 2448 2864
2sta
ge
full
FL -
dupl
ex 3000 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 2997 3468 2000 2500 3000 3500 2000 2500 3000 3500 2000 2500 3000 3500
3300 2000 2500 3000 3500 2000 2440 2930 3396 2000 2413 2896 3356 2000 2500 3000 3500 2000 2499 2998 3473 2000 2472 2962 3432
3st
age
- trip
lex 4500 1826 2118 2614 3054 1778 2062 2541 2968 1761 2042 2514 2936 1888 2188 2696 3147 1837 2128 2619 3057 1819 2107 2590 3023
4700 1766 2053 2550 2983 1720 2000 2479 2900 1704 1981 2453 2870 1829 2123 2632 3077 1780 2067 2558 2990 1762 2046 2530 2957 4800 1710 1995 2492 2922 1666 1943 2424 2842 1650 1925 2399 2812 1773 2065 2576 3017 1726 2010 2504 2933 1709 1991 2477 2901 5000 1681 1960 2457 2881 1638 1911 2391 2803 1623 1893 2366 2774 1744 2031 2541 2976 1699 1978 2471 2894 1682 1959 2445 2863 5500 1569 1837 2333 2741 1531 1792 2272 2670 1517 1776 2249 2643 1632 1908 2419 2838 1592 1860 2354 2763 1577 1843 2330 2734 6000 1466 1722 2218 2612 1432 1682 2162 2546 1420 1668 2141 2521 1529 1793 2305 2710 1493 1750 2245 2640 1479 1735 2223 2614
CAPACITY CHART IN KG FOR SINGLE TYRES AT 600MM LOAD CENTRE – CALCULATED VALUES
Type Max fork height,
mm
Pneumatic Tyres Pneumatic Shaped Solid Tyres Without sideshift With integral sideshift With hook on sideshift Without sideshift With integral sideshift With hook on sideshift
FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5
2sta
ge –
si
mpl
ex
3000 2000 2402 2844 3292 2000 2336 2763 3199 2000 2313 2733 3163 2000 2491 2946 3409 2000 2421 2860 3309 2000 2396 2828 3271 3300 2000 2306 2746 3183 1959 2244 2670 3095 1940 2223 2641 3061 2000 2397 2852 3304 2000 2332 2770 3209 2000 2308 2739 3174 4000 1814 2088 2524 2938 1769 2036 2458 2860 1752 2018 2433 2831 1900 2185 2638 3068 1851 2129 2566 2984 1833 2108 2539 2952 4500 1677 1939 2372 2770 1637 1893 2312 2700 1623 1877 2289 2673 1765 2039 2491 2905 1721 1988 2425 2828 1706 1970 2400 2799 5000 1544 1795 2225 2608 1509 1754 2170 2544 1496 1740 2150 2520 1634 1896 2347 2747 1595 1851 2287 2677 1581 1835 2264 2650
2sta
ge
full
FL -
dupl
ex 3000 2000 2360 2836 3283 2000 2296 2756 3190 1985 2273 2726 3155 2000 2448 2938 3399 2000 2379 2852 3300 2000 2355 2820 3263
3300 1975 2268 2737 3173 1922 2208 2661 3085 1904 2186 2633 3052 2000 2360 2843 3294 2000 2295 2761 3199 1980 2272 2731 3164
3st
age
- trip
lex 4500 1644 1909 2363 2763 1604 1863 2303 2693 1590 1847 2280 2666 1735 2011 2483 2899 1691 1960 2417 2822 1675 1942 2392 2793
4700 1589 1850 2304 2698 1552 1806 2246 2630 1538 1791 2224 2605 1681 1953 2425 2836 1639 1904 2362 2762 1624 1887 2338 2734 4800 1537 1796 2251 2642 1501 1754 2195 2576 1488 1738 2174 2551 1629 1899 2373 2781 1590 1853 2312 2709 1575 1836 2289 2682 5000 1511 1766 2219 2605 1477 1725 2165 2541 1464 1710 2144 2517 1604 1869 2343 2745 1565 1824 2283 2675 1551 1808 2260 2648 5500 1410 1654 2106 2478 1379 1617 2056 2419 1368 1604 2037 2397 1503 1758 2232 2621 1468 1717 2177 2556 1456 1703 2156 2531 6000 1317 1550 2001 2360 1289 1518 1956 2306 1279 1506 1938 2286 1410 1655 2129 2505 1379 1618 2078 2445 1367 1605 2059 2422
CAPACITY CHART IN KG FOR WIDE TREAD TYRES AT 600MM LOAD CENTRE – CALCULATED VALUES
Type Max fork height,
mm
Pneumatic Wide Tread Tyres Pneumatic Shaped Solid Wide Tread Tyres Without sideshift With integral sideshift With hook on sideshift Without sideshift With integral sideshift With hook on sideshift
FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5
2sta
ge –
si
mpl
ex
3000 2000 2451 2901 3357 2000 2383 2817 3260 2000 2359 2785 3223 2000 2500 2969 3435 2000 2439 2881 3333 2000 2414 2848 3295 3300 2000 2356 2805 3250 2000 2293 2725 3158 1982 2270 2696 3124 2000 2418 2876 3331 2000 2351 2793 3235 2000 2327 2761 3199 4000 1861 2142 2587 3010 1814 2087 2518 2929 1797 2068 2492 2898 1919 2207 2664 3097 1869 2149 2590 3012 1851 2129 2563 2979 4500 1726 1994 2437 2844 1684 1946 2374 2771 1669 1928 2351 2743 1785 2061 2517 2935 1740 2009 2450 2857 1724 1991 2425 2828 5000 1594 1851 2292 2684 1556 1808 2235 2617 1543 1792 2213 2592 1654 1918 2374 2778 1614 1872 2313 2706 1600 1856 2290 2679
2sta
ge
full
FL -
dupl
ex 3000 2000 2409 2893 3348 2000 2342 2809 3251 2000 2318 2778 3215 2000 2467 2961 3425 2000 2398 2873 3324 2000 2373 2840 3286
3300 2000 2319 2796 3240 1965 2256 2717 3149 1946 2234 2687 3114 2000 2380 2866 3320 2000 2315 2783 3225 1997 2291 2752 3189
3st
age
- trip
lex 4500 1694 1965 2429 2838 1652 1917 2366 2764 1637 1900 2342 2736 1755 2034 2510 2930 1710 1982 2443 2851 1695 1964 2417 2822
4700 1640 1907 2371 2774 1600 1860 2310 2703 1586 1844 2287 2676 1701 1976 2453 2867 1659 1926 2388 2791 1644 1909 2363 2763 4800 1588 1853 2318 2719 1550 1808 2259 2649 1536 1792 2237 2623 1650 1922 2401 2812 1609 1875 2338 2739 1595 1858 2314 2711 5000 1562 1823 2287 2682 1526 1780 2230 2615 1512 1764 2208 2589 1625 1892 2371 2777 1585 1846 2309 2705 1571 1830 2286 2678 5500 1461 1711 2175 2557 1428 1672 2123 2494 1416 1658 2103 2471 1524 1781 2260 2653 1489 1740 2204 2587 1476 1725 2182 2562 6000 1368 1608 2072 2440 1338 1573 2023 2383 1328 1560 2005 2361 1431 1678 2158 2538 1399 1641 2105 2476 1387 1627 2086 2453
CAPACITY CHART IN KG FOR DOUBLE TYRES AT 600MM LOAD CENTRE – CALCULATED VALUES
Type Max fork height,
mm
Pneumatic Double Tyres Pneumatic Shaped Solid Double Tyres Without sideshift With integral sideshift With hook on sideshift Without sideshift With integral sideshift With hook on sideshift
FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5 FDX2.0 FDX2.5 FDX3.0 FDX3.5
2sta
ge –
si
mpl
ex
3000 2000 2462 2914 3371 2000 2394 2829 3274 2000 2369 2797 3237 2000 2500 2976 3442 2000 2445 2888 3340 2000 2419 2855 3302 3300 2000 2368 2818 3265 2000 2304 2738 3173 1992 2281 2708 3138 2000 2424 2883 3339 2000 2357 2799 3242 2000 2333 2768 3206 4000 1872 2154 2602 3026 1824 2099 2531 2944 1807 2079 2505 2914 1925 2213 2671 3105 1874 2155 2598 3020 1856 2135 2570 2987 4500 1737 2007 2452 2861 1694 1958 2389 2787 1679 1940 2365 2759 1791 2067 2525 2944 1746 2016 2458 2866 1730 1997 2432 2836 5000 1605 1863 2307 2702 1567 1820 2249 2634 1554 1804 2228 2608 1660 1925 2382 2787 1620 1879 2321 2715 1606 1862 2298 2688
2sta
ge
full
FL -
dupl
ex 3000 2000 2420 2905 3362 2000 2353 2821 3265 2000 2329 2790 3228 2000 2473 2967 3433 2000 2403 2880 3331 2000 2378 2847 3293
3300 2000 2330 2809 3255 1975 2267 2729 3163 1955 2244 2699 3128 2000 2387 2873 3328 2000 2320 2790 3232 2000 2297 2759 3196
3st
age
- trip
lex 4500 1705 1978 2444 2855 1663 1929 2380 2781 1648 1912 2356 2753 1761 2040 2518 2939 1716 1989 2450 2860 1700 1970 2425 2830
4700 1651 1920 2386 2792 1611 1873 2325 2720 1597 1856 2301 2692 1707 1982 2461 2876 1665 1933 2396 2800 1649 1915 2371 2771 4800 1600 1866 2334 2736 1561 1821 2274 2666 1547 1805 2252 2640 1656 1929 2409 2822 1615 1881 2346 2748 1601 1864 2322 2720 5000 1574 1836 2303 2700 1537 1792 2245 2632 1523 1776 2223 2606 1631 1899 2379 2786 1591 1853 2317 2714 1577 1836 2294 2686 5500 1473 1724 2191 2575 1440 1685 2138 2512 1427 1671 2118 2488 1530 1788 2269 2663 1495 1747 2212 2596 1482 1731 2190 2571 6000 1380 1621 2088 2458 1350 1586 2038 2400 1339 1573 2020 2378 1437 1685 2166 2548 1405 1647 2114 2486 1393 1634 2094 2462
NOTES: All specifications listed in the tables are affected by the vehicle equipment and condition and also by operating area nature and conditions. Please contact your Nexen forklift truck dealer in case of critical or specific specifications for a proposed application.
LEGEND: NNT – Nexen New Transmission SNT – S New Transmission NYT – Nexen D-range Transmission - calculated value according to VDI 2198, EN 1726-1, DIN 15 172 and VDI 3973 - measured between road surface and top surface of the forks - with load backrest. Subtract 660mm if load backrest is removed - h6 subject to +/- 5mm tolerance - Full-suspension seat in depressed position - with load backrest. Subtract 16mm if load backrest is removed - Values based on the VDI 2198 standard calculation. Additional 100mm are recommended by the British Industrial Truck Association for extra operating margin at the rear of the truck - Consult your Nexen forklift truck dealer - Centre of gravity of unladen truck Ast = Wa + x + l6 + a (refer to lines 4.33 and 4.34) Wa – outer turning radius a = 200mm – minimum operating clearance (according to VDI 2198) x - Load distance, centre of drive axle to fork l6 – load length
TRUCK DIMENSIONS:
FDX2.0 / FGX2.0 FDX2.5 / FGX2.5 FDX3.0 / FGX3.0 FDX3.5 / FGX3.5 f 31° 28° 28° 25° g 22° 22° 26° 26° k 464 464 492 492 n 925 925 925 925
n – distance Seat Index Point to OverHead Guard
RATED CAPACITIES:
500
1000
1500
2000
2500
3000
3500
0 200 400 600 800 1000 1200Load centre, mm
Rat
ed lo
ad, k
g
FDX2.0
FDX3.5
FDX3.0
FDX2.5
NOTICE:
Handle elevated loads with care as the truck stability is reduced when the carriage is lifted up. Keep minimal mast tilt angle during loads elevation. Operators must be trained and adhere to the instructions included in the operating manual.
LEGEND: Load centre: distance from front forks surface to load gravity centre Rated load: based on calculated values for vertical masts (ISO 1074) up to 4500 for all variants with pneumatic single tyres