nikkon industrial lighting (2014 series)

success lighting catalogue_1, ‘13.09

2014 series

ind

ust

ria

l lig

hti

ng

• c

om

me

rcia

l lig

hti

ng

• i

nd

ust

ria

l lig

hti

ng

• c

om

me

rcia

l lig

hti

ng

• i

nd

ust

ria

l lig

hti

ng

• c

om

me

rcia

l lig

hti

ng

• i

nd

ust

ria

l

Success Electronics & Transformer Manufacturer Sdn Bhd (200853-k)A wholly owned subsidiary of Success Transformer Corporation Berhad.

Headquarters:No. 3,5 & 7 Jalan TSB 8, Taman Industri Sungai Buloh, 47000 Sungai Buloh, Selangor Darul Ehsan, West Malaysia.t: +603-6157 2788/ 2785/ 2787 f:+603-6157 2722 / 2723 e: [email protected] w: www.success.com.my

Australia sales office (ABN:80143481958)

Nikkon Lighting Pty. Ltd.Unit 3013 Artisan Road, Seven Hills 2147 NSW, Australiat: +61296209036, +61296245845 f: +61296209037 e: [email protected] w: www.nikkonlighting.com.au

Kenya sales office:Nikkon Success Kenya Ltd.P.O. Box 27803-00100 Nairobi, Alpha Centre, Mombasa Road, Godown No. 40, Kenyat: +25420-820015 +25457-2515275 f: + 25420-820025 e: [email protected] w: www.nsk.co.ke

Singapore sales office:Nikkon Lighting & Electrical Pte. Ltd. (201117228-C)

No. 7, Kaki Bukit Road 1, #03-15 Eunos Technolink, Singapore 415937t: +6567424377 f: +6567424366 e: [email protected]

Indonesia sales office:PT Boxon Nikkon JayaindoJL Madu No. 1 Mangga Besar, Taman Sari, Jakarta 11180, Indonesiat: +62-21 6250961 f: +62-21 6250962 e: [email protected] w: www.nikkonlighting.co.id

Thailand sales office:Nikkon Lighting (Thailand) Co., Ltd317 Kamolsukosol Building, Unit 8E, 8Fl, Silom Rod, Khet Bangrak, Bangkoke: [email protected] w: www.nikkonlighting.co.th

2014 series

one way track to success

why choose Success? First class manufacturing facilities and resources. We invest considerable amount of money upgrading equipments and laboratory testing facilities, enabling us to better test the performance of our lighting and design products before releasing them into the market. In this way we ensure, and maintain quality of the highest standard. The laboratory is equipped with Goniophotometric and Spectroradiometric systems that enable us to fully test energy efficient lighting in order to comply with the GREEN ENERGY product category standard. The laboratory also has a dust chamber, water-proof tester, humidity tester and salt fog corrosion tester. Products are constantly upgraded, and new products innovated, to offer customers a wider range of lighting. The research and development team is currently looking into renewable (such as solar, pico hydro and wind) energy products and energy efficient industrial lighting products.

We are a one-stop lighting manufacturer that can provide custom-made energy efficient luminaire designs, using the skills of our well experienced staff and full state-of-the-art testing lab facilities. We use this expertise and top of the range software and equipment to provide comprehensive lighting design simulations for our customers or lighting consultants, according to their specific needs. We can simulate all kinds of designs for all kinds of situations producing lifelike renderings so that customers can see as realistically as possible what the design or area looks like.

We are an Original Design Manufacturer (ODM) – we design and manufacture products for customers under their own brands. We are an Original Equipment Manufacturer (OEM) – we manufacture products for customers according to their designs, under their own brands.

Success Electronics and Transformer Manufacturer Sdn Bhd is highly respected in the marketplace with an exemplary track record. We are committed to our customers.

Knowledgeable and professional sales team providing good customer support and after-sales service.

about us

Success Electronics & Transformer Manufacturer (SUCCESS) is a well known lighting and low-voltage transformer manufacturer based in Malaysia. It is wholly owned by Success Transformer Corporation Bhd, which is listed on Malaysia’s securities exchange, Bursa Malaysia. The company was established since 1980, with the accreditations of ISO9001:2008 Quality Management System Standards certification.

SUCCESS is the specialist in both lighting and transformers, in which the expertise lies in the design, integration, manufacture and supply of the premium quality products. Currently, SUCCESS has over 1000 distributors throughout Malaysia and export to more than 50 countries around the world. It is our intention to continue expanding our role as a reliable, dynamic and important player both in Malaysia and overseas.

We have a committed and dynamic workforce. From management through technical and Research & Development (R&D) engineers to sales and support staff, we all work as one team with the same goal in mind: Customer satisfaction. This has engendered a loyal customer base. Many of our customers are longstanding indeed, having continued doing business with us since the 1980s. Constantly forging ahead, we are dedicated to improving our products and customer service.

contentsindustrial lighting

floodlight S1500 pg 08S1501 pg 10S2000 pg 12S2019 pg 14S1538 & S2038 pg 16S2098 pg 18S2030 pg 20S3000 pg 22S3319 pg 24S4030 pg 26S7019 pg 28S8019 pg 30

highbay & lowbaySaturn series highbay pg 34DS series highbay pg 36AL series highbay pg 38AL 01000 series highbay pg 40S6128 highbay pg 42Premium T5 highbay pg 44NL series lowbay pg 46SMS IP rated lowbay pg 48

street lightingS419 pg 52S412 pg 54S438-N pg 56S159 pg 58

architectural lightingSuria wall light S1070 pg 62T8 IP65 weather proof fitting pg 64T5 IP65 weather proof fitting pg 66T8 IP66 stainless steel fluorescent fitting pg 68

lighting accessoriesHID lamp ballast pg 72Ignitor (nylon casing) pg 74Superimposed ignitor (aluminium casing) pg 76IP rated remote control gear pg 78Remote control gear pg 80Indoor remote control gear pg 82Emergency lighting module (power pack) pg 84

commercial lighting

light cast recessed luminaires-HID ME series pg 90 SO series pg 92FA series pg 93

light cast recessed luminaries- CFLPA series pg 94TE series pg 100ET series pg 102

modular recessed luminaires MA series pg 104MA spot head series pg 105

ceiling mounted KR series pg 107TA series pg 109 IS series pg 110IR series pg 112

track light and accessories XE series pg 113LE series pg 116 MO series pg 118

pendant luminaires CO series pg 120

outdoor commercial lighting

galileo landscape lightinggalileo L130701 pg 126galileo L130702 pg 127galileo L130703 pg 128galileo L130704 pg 129galileo L130705 pg 130galileo L130706 pg 131brentano bollardbrento B140802 pg 133brento B140803 pg 134brento B140804 pg 135brento B140805 pg 136

horeca, elano, calvary, fagon wall washerhoreca W100101 pg 138elano W100201, W100202 & W100203 pg 139calvary W100301 pg 139calvary W100302 pg 141fagon W100501 pg 142fagon W100502 pg 143fagon W100503 pg 144

anglo portable garden spotlightanglo P110402 & P110403 (with glare shield) pg 146

bulbous underground lightingbulbous G120601 & G20606 pg 148bulbous G120602 & G20607 pg 149bulbous G120603 & G20608 pg 150bulbous G120604 & G20609 pg 151bulbous G120605 & G20610 pg 152

lamp table pg 153

industrial lighting

S1500

order code

model lamp type lamp holder order code

S1500 SY MH 70W tubular / bulb / double ended E27 / RX7s S1500-M0070S1500 SY MH 150W tubular / bulb / double ended E27 / RX7s S1500-M0150S1500 SY HPS 70W tubular / bulb E27 S1500-S0070S1500 SY HPS 150W tubular / bulb E40 S1500-S0150

note : specifications are subject to change without prior notice

features electrical system• built-in control gear suitable for HID lamps

from 70W - 150W housing• high pressure aluminium die-cast housing reflector• high purity anodized hammered finish

aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy

powder compliance and approvals• degree of protection IEC60529:2001

dimension

photometric curve

key for standard order coding

technical data

ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • E27, E40 and RX7s ceramic lamp holdermaximum weight • 5.50kgcolour of housing • black

200292

80

364

242

ø14

ø11

820

1640

2460

3280

4100

note : photometric result tested based on 14000lm MH 150W coated bulb

0

±180

-90 90

C90

C180

C270

C0

S1500 - M 0150 capacity code : example = 150W

lamp type : S = high pressure sodium

: M = metal halide

casing model

S1501

order code


S1501 MH 70W double ended RX7s S1501-M0070S1501 MH 150W double ended RX7s S1501-M0150S1501 HPS 70W double ended RX7s S1501-S0070S1501 HPS 150W double ended RX7s S1501-S0150

note : specifications are subject to change without prior notice* casing available in black and white colour.

85 230

430

ø10

110

dimension

photometric curve



from 70W - 150W housing• high pressure aluminium die-cast housing

with AKzo Nobel Interpon outdoor epoxy powder coating

reflector• high purity anodized hammered finish



technical data

ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wholder type • RX7s ceramic lamp holdermaximum weight • 5 kgcolour of housing • white & black

note : photometric result tested based on 11000lm MH 150W double ended tube

0

±180

-90

C90

C180

C270

C0

90

3180

4240

5300

S1501 - S 0150 capacity code : example = 150W


: M = metal halide

casing model

S2000

order code


S2000 SY MH 250W (2.1A) tubular E40 S2000-M0250S2000 SY MH 400W tubular E40 S2000-M0400S2000 SY HPS 250W tubular E40 S2000-S0250S2000 SY HPS 400W tubular E40 S2000-S0400

note : S2000 asymmetrical type floodlight is available upon request • specifications are subject to change without prior notice

dimension

photometric curve



from 250W - 400W housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy

powder coating reflector• high purity anodized hammered finish



technical data

ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wholder type • E40 ceramic lamp holdermaximum weight • 9 kgcolour of housing • black

note : photometric result tested based on 32000lm MH 400W clear tube

0

±180

-90

C90

C180

C270

C0

902421.88

4343.61

7265.40

9687.20

12109.00

145420

200

500

295

ø10

S2000 Sy - M 0400 capacity code : example = 400W


: M = metal halide

reflector model : Sy = symmetrical

: Asy = asymmetrical

casing model

order code


S2019 SY MH 250W (2.1A) tubular E40 S2019-M0250S2019 SY MH 400W tubular E40 S2019-M0400S2019 SY HPS 250W tubular E40 S2019-S0250S2019 SY HPS 400W tubular E40 S2019-S0400

note : S2019 asymmetrical type floodlight is available upon request • specifications are subject to change without prior notice

S2019

dimension

photometric curve



from 250W - 400W housing• high pressure aluminium die-cast housing


reflector• high purity anodized hammered finish

aluminium reflector glass• frameless thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy

powder

technical data

ingress protection • IP65voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 250W - 400Wholder type • E40 ceramic lamp holdermaximum weight • 9.5 kgcolour of housing • black

145420

200

500

295

ø10


0

±180

-90

C90

C180

C270

C0

902421.88

4343.61

7265.40

9687.20

12109.00

S2019 Sy - M 0400 capacity code : example = 400W


: M = metal halide



casing model

S1538 & S2038

order code


S1538 Sy MH 70W double ended RX7s S1538 Sy-M0070S1538 Sy MH 150W double ended RX7s S1538 Sy-M0150S1538 Sy HPS 70W double ended RX7s S1538 Sy-S0070S1538 Sy HPS 150W double ended RX7s S1538 Sy-S0150 S1538 Asy MH 70W double ended RX7s S1538 Asy-M0070S1538 Asy MH 150W double ended RX7s S1538 Asy-M0150S1538 Asy HPS 70W double ended RX7s S1538 Asy-S0070S1538 Asy HPS 150W double ended RX7s S1538 Asy-S0150 S2038 Sy MH 250W tubular E40 S2038 Sy-M0250S2038 Sy MH 400W tubular E40 S2038 Sy-M0400S2038 Sy HPS 250W tubular E40 S2038 Sy-S0250S2038 Sy HPS 400W tubular E40 S2038 Sy-S0400 S2038 Asy MH 250W tubular E40 S2038 Asy-M0250S2038 Asy MH 400W tubular E40 S2038 Asy-M0400S2038 Asy HPS 250W tubular E40 S2038 Asy-S0250S2038 Asy HPS 400W tubular E40 S2038 Asy-S0400

note : specifications are subject to change without prior notice • Asy - asymmetrical reflector • Sy - symmetrical* for S1538 model, E27 lamp holder only available upon request.

S2038

S1538

dimension

photometric curve


features housing• high pressure aluminium die-cast housing


reflector• high purity anodized hammered aluminium

reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy

powder colour of housing• MAT RAL 9006 (Akzo Nobel) compliance and approvals• sirim general requirement & test

IEC60598-1:2003• sirim particular requirement (floodlight) IEC60598-2-5:2006

technical data

ingress protection • IP66voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150W • 250W - 400Wholder type • RX7s / E40maximum weight • 6 kg (S1538) • 10.5kg (S2038)

128

35 110

3 x Ø11

274

S1538

255

386446

-90

note : photometric result tested based on 13500lm MH150w tube

0

±180S1538 - Sy

90 90


0

±180S2038 - Asy

-90

12638.26

10110.61

7582.96

5055.30

2527.65

4442.64

3554.11

2665.58

1777.06

888.53

C90

C180

C270

C0

419

S2038

399

499434

141

3818080

4 x Ø10.5Ø15

S1538 Asy - M 0070 capacity code : example = 70W


: M = metal halide



casing model

order code

model lamp type lamp holder order codeS2098 SY MH 250W Tubular E40 S2098 SY – M0250S2098 SY MH 400W Tubular E40 S2098 SY – M0400S2098 SY HPS 250W Tubular E40 S2098 SY – S0250S2098 SY HPS 400W Tubular E40 S2098 SY – S0400S2098 ASY MH 250W Tubular E40 S2098 ASY – M0250S2098 ASY MH 400W Tubular E40 S2098 ASY – M0400S2098 ASY HPS 250W Tubular E40 S2098 ASY – S0250S2098 ASY HPS 400W Tubular E40 S2098 ASY – S0400

note : specifications are subject to change without prior notice • Asy - asymmetrical reflector • Sy - symmetrical

S2098 - SYM

S2098

dimension

S2098

photometric curve

S2098 - sym


technical data

ingress protection • IP66 voltage • 220 - 240 Vac 50 /60Hz lamp wattage • 250W - 400W lamp holder • E40 maximum weight • 12.5 kg

features housing• High pressure aluminium die-cast housing

with AKZO Nobel Interpon outdoor epoxy powder coating.

reflector• High purity anodized polished hammered

aluminium reflector. glass• Thermal resistant tempered glass mounting bracket • Steel mounting bracket coated with epoxy

powder colour of housing• MAT RAL 9006 (Akzo Nobel) compliance and approvals• sirim general requirement & test

IEC60598-1:2003• sirim particular requirement (floodlight) IEC60598-2-5:2006

435

483

234

542469

60°90

180

3 x Ø12

58

note : photometric result tested based on 6600lm MH 70W G12 tube

±180

0

-90 902762.21

5524.42

8286.63

11048.84

13811.05

S2098 SY - M 0250 capacity code : example = 250W


: M = metal halide


casing model : Asy = asymmetrical

S2030

order code


S2030 MH 250W (2.1A) tubular E40 S2030 - M0250S2030 MH 400W tubular E40 S2030 - M0400 S2030 HPS 250W tubular E40 S2030 - S0250S2030 HPS 400W tubular E40 S2030 - S0400 S2030 HPMV 250W bulb E40 S2030 - H0250S2030 HPMV 400W bulb E40 S2030 - H0400


features housing• high pressure aluminium die-cast housing


reflector• high purity anodized hammered aluminium

reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy

powder colour of housing• black compliance and approvals• degree of protection IEC60529:2001

technical data

ingress protection • IP65voltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 250W - 400Wholder type • E40 maximum weight • 10.0 kg


0

±180

-90 90


0

±180

-90 90

7046.95

9395.94

2348.98

4697.97

11744.92

S2030 - Wide beam

C90

C180

C270

C0

S2030 - Narrow beam

C90

C180

C270

C0

6786.17

9048.22

2263.06

4524.11

11310.28

452

306

405 267

150

2 x Ø10.5

Ø13

S2030

dimension

photometric curve


S2030 - S 0250 capacity code

lamp type

casing model

: example = 250W

: S = high pressure sodium: M = metal halide: H = mecury vapor

S3000

order code


S3000 MH 1000W tubular E40 S3000-M1000S3000 HPS 1000W tubular E40 S3000-S1000accessories housing material IP rated order code

remote control gear (MH 1000W) steel c/w epoxy powder IP43 S5100 UC-M1000remote control gear (HPS 1000W) steel c/w epoxy powder IP43 S5100 UC-S1000remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000


dimension

photometric curve

accessories


IP43 IP65

features housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating reflector• high purity anodized hammered finish aluminium reflector glass• thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder lamp holder• E40 lamp holder conforming to EN / VDE

standard compliance and approvals• degree of protection IEC60529:2001

technical data

ingress protection • IP65 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 11.6 kgcontrol gear maximum weight • S5100-M1000 : 14 kg / S5100-S1000 : 15.5 kgcolour of housing • black

200585

380

540 ø16M8 x 20

180

360

260 180

300

S5100-UC S5100-UA

147 265

ø8 x 15 (mm) slot

232 250

180

ø10

200

363

0

±180

-90 90

C90

C180

C270

C0

7989.69

15979.38

23969.08

31958.77

39948.46




: M = metal halide

casing model

S3319

order code



remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000


note : photometric result tested based on 85000lm MH 1000W - BH / 67 clear tube

C0 C180

C90

C270 0

±180

-90 90

40079.97

8015.99

16031.99

24047.98

32063.98

dimension

photometric curve

accessories


features body frame / colour• deep draw with high purity aluminium sheet• dark grey colour reflector• high purity anodized polished aluminium

deep draw reflector glass• fixed thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy

powder attached with rotatable mounting bracket

lamp holder• E40 lamp holder conforming to EN / VDE

standard compliance and approvals• sirim general requirement & test

IEC60598-1:2003• sirim particular requirement (floodlight)

IEC60598-2-5:2006

technical data

ingress protection • IP66 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 11 kgcontrol gear maximum weight • S5100 UA-M : 14kg / S5100 UA-S : 15.5kg

S5100-UA

232 250

180

ø10

200

363

589

520

623

576

595

45º

188180

1563

R70 R55



: M = metal halide

casing model

S4030

order code


S4030 MH 2000W tubular E40 S4030-M2000accessories housing material IP rated order code

remote control gear die-cast aluminium IP65 S5200 UA-M2000

note : S4030 ASY 100W is available upon request • specifications are subject to change without prior notice

dimension

photometric curve

accessories


technical data

ingress protection • IP65 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 2000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 12 kgcontrol gear weight • 19.5 kgcolour of housing • black

features housing• high pressure aluminium die-cast housing with AKzo Nobel Interpon outdoor epoxy powder coating reflector• high purity anodized hammered finish aluminium reflector glass• frameless thermal resistant tempered glass mounting bracket• steel mounting bracket coated with epoxy powder rear cover• easy access to the lamp from rear without removing the front glass lamp holder• E40 lamp holder conforming to EN / VDE standard compliance and approvals• degree of protection IEC60529:2001

290510

540

490495ø16

300

S5200-UA

232 250

180

ø10

200

363

note : photometric result tested based on 180000lm MH 2000W E40 clear tube

0

±180

-90 90

20000

4000

8000

12000

16000

C90

C180

C270

C0



: M = metal halide

casing model

S7019

order code



remote control gear (MH 1000W) die-cast aluminium IP65 S5100 UA-M1000remote control gear (HPS 1000W) die-cast aluminium IP65 S5100 UA-S1000


dimension

photometric curve

accessories


features body frame / colour• f ull aluminium extruded through high pressure die-cast with AKzo Nobel Interpon

outdoor epoxy powder coating• dark grey colour reflector• high purity anodized polished aluminium


powder attached with rotatable mounting bracket

rear cover• easy access to the lamp from the rear of the

fitting lamp holder• E40 lamp holder conforming to EN / VDE

standard compliance and approvals• sirim general requirement & test

IEC60598-1:2003• sirim particular requirement (floodlight)

IEC60598-2-5:2006

technical data

ingress protection • IP66 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 1000W & HPS 1000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 11 kgcontrol gear weight • S5100-UA : 14.5 kg

S5100-UA

232 250

180

ø10

200

363

458

330

45º

ø587

623

R64

18

155163

54

R46

0

±180

-90 90

350038.18

7007.64

140015.27

210022.91

280030.54

note : photometric result tested based on 85000lm MT 1000A - BH / 67 clear tube

C0 C180

C90

C270



: M = metal halide

casing model

S8019

order code


S8019 MH 2000W tubular E40 S8019-M2000accessories housing material IP rated order code

remote control gear (MH 2000W) die-cast aluminium IP65 S5200 UA-M2000


features body frame / colour• full aluminium extruded through high pres-

sure die-cast with AKzo Nobel Interpon outdoor epoxy powder coating

• dark grey color reflector• high purity anodized polished aluminium


powder attached with rotable mounting bracket

rear cover• easy access to the lamp from the rear of the

fitting lamp holder• E40 lamp holder conforming to EN / VDE

standard

dimension

photometric curve

accessories


technical data

ingress protection • IP66 (lamp fitting)voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • MH 2000Wholder type • E40 ceramic lamp holderfloodlight maximum weight • 12 kgcontrol gear weight • 19.5 kg

518

372

45º

ø587

666

R64

18

155163

54

R46

S5200-UA

232 250

180

ø10

200

363

0

±180

-90 90

1143057.10

228611.42

457222.84

685834.26

914445.68


C0 C180

C90

C270



: M = metal halide

casing model

highbay & lowbay

order code


saturn 1 HID / CFL E27 saturn 1saturn 3 HID / CFL E27 saturn 3remote control gear lamp wattage lamp type order code

S5007-IC 70W MH / HPS S5007-ICS5008-IC 80W HPMV S5008-ICS5010-IC 100W HPS S5010-ICS5012-IC 125W HPMV S5012-ICS5015-IC 150W MH / HPS S5015-IC


saturn series

features control gear housing• high quality cold rolled steel with epoxy

powder coating reflector• polycarbonate reflector for uniform light

distribution others• E27 / E40 ceramic lamp holder

dimension

photometric curve

accessories


technical data

voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 150Wcontrol gear • MH 70W - 150W • HPS 70 - 150W • HPMV 80 - 125Wcolour of housing • light grey (control gear)

note : photometric result tested based on 13500lm MH 150W coated bulb complete with 12” PC reflector

0

±180

-90 90

5700

3420

4560

1148

2230

saturn 1 with 12” PC Reflector saturn 3 with 16” PC Reflector

ø317 ø406

±770

194

66

±901

325

66

130

saturn 2 lamp holder remote control gear

260

105

8810

219

57

12

ø5 ø8

Saturn 1 - M 070 - S5007 - IC remote control gear

capacity code : example = 70W


: M = metal halide

casing model

reflector & diffuser matching table

casing model reflector type lamp type diffuser order code metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W

DS70150 12” PC • • • • • • - DS70150

16” PC • • • - 19” PC • • • •DS25400 22” PC • • • • DS25400 22” PC • • • -

note : others matching are available upon request • specifications are subject to change without prior notice • PC : polycarbonate - : not matching • : matching

DS series highbay

dimension


technical data

voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40 ceramic lamp holdercolour of housing • light grey


powder coating power factor correction capacitor• 100˚C aluminium casing self healing

capacitor with overpressure break action mechanism

reflector• polycarbonate reflector for uniform light

distribution polycarbonate diffuser• optional diffuser can be mounted onto the

reflector to give better luminance control others• ceramic lamp holder and thermal resistant

fibre glass wire

photometric curve

installation diagram

note : photometric result tested based on 36000lm MH 400W coated bulb come with 22” PC refractor

0

±180

-90 90

9417.75

5650.65

7534.20

1883.55

3767.10

Refractor & diffuser type: 12 = 12” PC reflector without diffuser 22d = 22” PC reflector with diffuser


lamp type : M = metal halide S = high pressure sodium

H = mercury vapor

casing model

DS70150

b

a

c

DS25400

a b

c

de

f

thumb screw

12” PC Prismatic Reflector 16” PC Prismatic Reflector 19” PC Prismatic Reflector 22” PC Prismatic Reflector

ø80

ø110

ø5 ø9

26

16”, 19” & 22” refractor mounting hole

a : close the front cover b : tighten 4 of the pan head screw c : tighten 3 of the pan head screw and let it until 1/4 finish d : fix the reflector to the highbay e : rotate the reflector properly f : tighten the mounting screw to secure the reflector

a : close the front cover b : tighten 4 of the pan head screw c : tighten 3 of the pan head screw and let it until 1/4 finish d : fix the reflector to the highbay e : rotate the reflector properly f : tighten the mounting screw to secure the reflector

matching table

casing model reflector type lamp type visor guard metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W

N412G • • • • • • • • • • • N712G • • • • • 6407 • • • • • • • • • - •

AL70150 / RAL8718 • • • • • AL25400

RAL15MFWR • • • • • • • • • • • RAL18MFWR • • • • •

note : specifications are subject to change without prior notice - : not matching • : matching

attachment

visormodel dimension (mm) weight (kg) thickness (mm) order code

N412G glass visor ø380 0.45 5 N412G glassN712G glass visor ø465 2.20 5 N712G glassRAL8718 glass visor ø465 2.20 5 VGAL8718RAL15MFWR glass visor ø401 1.70 5 VGAL15MFWR RAL18MFWR glass visor ø476 2.40 5 VGAL18MFWR

AL series highbay

dimension

reflectormodel dimension (mm) weight (kg) a bN412G 315 ø390 0.4N712G 405 ø465 0.76407 245 ø400 0.4RAL8718 335 ø470 0.6RAL15MFWR 286 ø401 0.5RAL18MFWR 335 ø476 0.8


technical data

voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 & E40 ceramic lamp holdercolour of housing • light grey


powder coating power factor correction capacitor• 100˚C aluminium casing self healing

capacitor with overpressure break action mechanism

reflector• high purity anodized polished aluminium

reflector tempered glass / safety guard• optional visor and guard can be mounted

onto the reflector for safety purposes others

• ceramic lamp holder and thermal resistant fibre glass wire

photometric curve


a : close the front coverb : tighten 4 of the pan head screw c : fix the ripper with the reflectord : rotate the ripper properly to secure the reflector

a : close the front coverb : tighten the thumb screwc : fix the ripper with the reflectord : rotate the ripper properly to secure the reflector

d

c

b

a

AL70150Refractor & diffuser type: 12 = 12” PC reflector without diffuser 22d = 22” PC reflector with diffuser


lamp type : M = metal halide S = high pressure sodium

H = mercury vapor

casing model

8718 + VGAL 8718

order code

casing model lamp wattage lamp type weight (kg) order code

AL 01000 highbay MH 700W bulb 12.5 AL 01000 - M0700

AL 01000 highbay MH 1000W bulb 14.0 AL 01000 - M1000

AL 01000 highbay HPMV 700W bulb 12.0 AL 01000 - H0700

AL 01000 highbay HPMV 1000W bulb 13.5 AL 01000 - H1000reflector model weight (kg) order code

AL reflector RAL22MFWR 1.5 RAL22MFWRattachment dimension (mm) thickness (mm) weight (kg) order code

Tempered glass visor ø570 5 3.2 VGAL22MFW


AL 01000 series highbay

dimension

photometric curve


technical data

voltage • 220 - 240 Vac 50 Hz / 60Hzlamp wattage • 700W - 1000Wholder type • E40 ceramic lamp holdercolour of housing • light grey

features control gear housing• high quality cold rolled steel complete with

epoxy powder coating reflector• high purity anodized polished aluminium

reflector tempered glass• optional visor can be mounted onto the

reflector for safety purposes others• ceramic lamp holder and thermal resistant

fiber glass wire


428

ø 579

ø71

ø89

ø6 ø12

27

180 180 180

460 460

180

RAL 22MFWR 22” AL reflector

reflector mounting hole

AL 01000 casing

0

±180

-90 903601.43

7202.86

10804.29

14405.72

18007.15

note : photometric result tested based on 87000lm MH 1000W coated bulb c/w RAL22MFWR 22” Aluminium Reflector

A

B

c

D

F

E

A. close the front cover

B. tighten the cover screw

C. tighten the mounting screw to allow spacing to fix the reflector

D & E : fix and turn the reflector to the highbay casing

F: tighten the screw to secure the reflector

AL01000 - M 1000 - RAL22MFWR + VGAL22MFWattachment (visor model)

reflector model



: M = metal halide

: H = mercury vapor

casing model

S6128

order code

description weight (kg) order code

housing COPA - ST 1 x MH 250W 5.1 COPA-STM25 COPA - ST 1 x MH 400W 6.1 COPA-STM40 COPA - ST 1 x HPS 250W 6.1 COPA-STS25 COPA - ST 1 x HPS 400W 7.2 COPA-STS40 COPA - ST 1 x HPMV 250W 5.1 COPA-STH25 COPA - ST 1 x HPMV 400W 5.6 COPA-STH40

reflectors 16” PC prismatic reflector 1.1 RPC16 22” PC prismatic reflector 2.0 RPC22 15” AL multi facet wide beam reflector 0.5 RAL15MFW 18” AL multi facet wide beam reflector 0.8 RAL18MFW

attachments 16” PC prismatic diffuser 0.5 DPC16 22” PC prismatic diffuser 1.2 DPC22 15” AL multi facet wide beam reflector glass cover 1.7 VGAL15MFW 18” AL multi facet wide beam reflector glass cover 2.4 VGAL18MFW

note : additional safety guard is available upon request • specifications are subject to change without prior notice • PC : Polycarbonate • AL : Aluminium

features gear box• high pressure aluminium die-cast housing


reflector• high purity aluminium reflector or polycar-

bonate reflector diffuser / visor / safety guard• optional PC diffuser, tempered glass visor and guard can be mounted onto the reflector for safety purpose installation / mounting• suitable for single point suspension on

wire and chain compliance and approvals• sirim general requirement & test

IEC60598-1:2003• sirim particular requirement

IEC60598-2-5:2006

dimension

accessories

photometric curve


technical data

ingress protection(IP) • IP23 matching with PC refractor • IP65 matching with AL reflector & visorvoltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 250W - 400Wholder type • E27 & E40 ceramic lamp holdercolour of housing • dark grey

128

64

ø8

copa - ST highbay housing

note : copa - MB highbay is available upon request ST : standard MB : matching bracket

copa - MB highbay housing

168230204

253

note : photometric result tested based on 19000lm MH 250W coated bulb complete with 15” AL reflector

45 45

320

90 90

240

cd / 1000klm

80

160

ø476ø401

335286

18” wide beam multi facet AL reflector15” wide beam multi facet AL reflector

16” PC Prismatic reflector 22” PC Prismatic reflector

ø406 ø568

325418

COPA - STM25 - M 0250 - RPC16 + DPC16attachment (visor model)

reflector model



: M = metal halide

: H = mercury vapor

casing model

premium T5 highbay

order code

casing model lamp type lamp holder weight order code

T5 654 fluorescent highbay 6 x T5 54W HO constant G5 7.6 kg T5 654 6 x 54WT5 654 fluorescent highbay 4 x T5 54W HO constant G5 7.4 kg T5 654 4 x 54W T5 454 fluorescent highbay 4 x T5 54W HO constant G5 4.6 kg T5 454 4 x 54WT5 454 fluorescent highbay 2 x T5 54W HO constant G5 4.4 kg T5 454 2 x 54Wattachment wattage dimension weight order code

T5 654 acrylic cover 6 x 54W 456 x 1222 mm 2.0 kg 654 6 x 54W acrylic coverT5 654 acrylic cover 4 x 54W 456 x 1222 mm 2.0 kg 654 4 x 54W acrylic coverT5 454 acrylic cover 4 x 54W 250 x 1222 mm 1.2 kg 454 4 x 54W acrylic coverT5 454 acrylic cover 2 x 54W 250 x 1222 mm 1.2 kg 454 2 x 54W acrylic cover

features housing• 0.5mm iron sheet with high quality powder

coated end cap• 0.8mm iron sheet with quality powder

coated reflector• Alanod specular MIRO04 with 95%

reflection lamp holder• G5 lamp holder conforming to EN / VDE

standard Osram Luminax T5

• fluorescent lamps provide unbeatable amounts of light and save enormous amount of money and electricity

Osram Quicktronic• electronic control gear provide more stable

& powerful output heat resistant cable• increase the T5 highbay quality protective cover• optional transparent lens

applications warehouse• excellent lumen maintenance prevents

light levels from dropping to unsafe or unacceptable levels and higher lumens per watt lower energy costs

industrial environment• industrial suspended luminaires for

applications where the mounting height exceeds 5.5m. An energy efficient replacement for the discharge highbay that suits most applications where large areas are lit

manufacturing areas• provides significant energy savings,

improved color recognition and longer maintenance cycles for manufacturer facilities. Improvements in lamp and ballast technology create a better alternative to HID systems

hangers• high fixture efficiency and optical control

deliver the peak candlepower needed to produce desired illumination levels from high mounting heights.

dimension

photometric curve


technical data

voltage • 220 - 240 Vac 50 / 60 Hzlamp wattage • 2 x 54W • 4 x 54W • 6 x 54Wholder type • G5colour of housing • white

T5 654 - 6 x 54W

lamp type

casing model

matching table

model lamp type metal halide high pressure sodium mercury vapor 70W 150W 250W 400W 70W 150W 250W 400W 80W 125W 250W 400W

NL 150-RMS • • • • • •NL 400-RMS • • • • • •NL 150-SMS • • • • • •NL 400-SMS • • • • • •NL 150-SMR • • • • • •NL 400-SMR • • • • • •

RMS : recessed mount square • SMS : surface mount square • SMR : surface mount rectangularnote : specifications are subject to change without prior notice

NL series lowbay

features electrical system• built-in control gear suitable for HID lamp

from 70W - 400W with well ventilated control gear compartment

reflector• high purity aluminium reflector with

hammered / clear polished surface glass• thermal resistant tempered glass others• ceramic lamp holder and thermal resistant

fibre glass wire

0

±180

-90 901280

2520

3280

5040

5300

note : photometric result tested based on 19000lm MH 250W coated bulb

NL400 RMS - M 0250capacity code : example = 250W

lamp type : M = metal halide S = high pressure sodium H = mercury vapor

model

dimension

model width depth height opening holeNL 150-RMS 400 mm 150 mm 400 mm 345 x 345 mmNL 400-RMS 500 mm 230 mm 500 mm 420 x 420 mmNL 150-SMS 345 mm 150 mm 345 mm -NL 400-SMS 420 mm 230 mm 420 mm -NL 150-SMR 250 mm 150 mm 430 mm -NL 400-SMR 320 mm 195 mm 600 mm -

photometric curve


technical data

voltage • 220 - 240 Vac 50 / 60Hzlamp wattage • 70W - 400Wholder type • E27 / E40 ceramic lamp holdercolour of housing • white

w

NL SERIES SMS NL SERIES RMS NL SERIES SMR

w wd d d

h h h

SMS IP rated Lowbay

order code

casing model lamp type lamp holder order codeSMS IP Lowbay MH 250W Tubular E40 SMS IP Lowbay – M0250SMS IP Lowbay MH 400W Tubular E40 SMS IP Lowbay – M0400SMS IP Lowbay HPS 250W Tubular E40 SMS IP Lowbay – S0250SMS IP Lowbay HPS 400W Tubular E40 SMS IP Lowbay – S0400SMS IP Lowbay HPMV 250W Bulb E40 SMS IP Lowbay – H0250SMS IP Lowbay HPMV 400W Bulb E40 SMS IP Lowbay – H0400


dimensions

photometric

key standard for order coding:

technical data

Ingress protection (IP) • IP 65 voltage • 220 ~ 240 Vac 50 / 60Hz lamp wattage • 250 ~ 400W holder type • E40 colour of housing • white

features:

material• high quality cold rolled steel with epoxy

powder coating electrical system• built – in control gear suitable for HID lamp

from 250W – 400W reflector• high purity aluminium reflector with

hammered surface glass• thermal resistant tempered glass gasket• high durability silicon gasket other• ceramic lamp holder and thermal resistant fibre glass wire

dimension :

420

420

271

236

key for standard order coding : SMS IP LOWBAY - M 0400

lamp type : M = metal halide S = high pressure sodium H = mecury vapor

casing model


0

±180

-90 902041.43

4082.87

6124.30

8165.73

10207.16

`

note : photometric result tested based on 36000lm MH 400W tubular

street lighting

matching table

housing model lamp type lamp holder casing dimension (mm) weight (kg) order code high pressure sodium a b c d 70W 150W 250W 400W

S419-70 • E27 500 200 136 50 5.0 S419-70-S0070

S419-150 • • E27&E40 639 269 170 50 7.5 S419-150-S0150

S419-250 • • E40 764 302 189 65 10.5 S419-250-S0250

S419-400 • • E40 880 354 260 65 15.5 S419-400-S0400

note:metalhalide&mercuryvaporstreetlanternareavailableuponrequest•specificationsaresubjecttochangewithoutpriornotice

S419

dimension

photometric curve


technical data

ingressprotection•IP66(lampcompartment)&IP66(gearcompartment)insulationclass•classI(note:classIIisavailableuponrequest)voltage•220-240Vac50/60Hzlampwattage•70W-400Wholdertype•E27&E40ceramicholdermaximumweight•15.5kgdesignedstandards•IEC60598-2-3spigotsize•ø50mm-S419-70&S419-150 ø65mm-S419-250&S419-4000

posttop sideentry

features electrical system•built-incontrolgearsuitableforHIDlampsfrom70W-400W

housing•fullaluminiumextrudedthroughhighpressuredie-castwithAKzo Nobel Interpon outdoor

epoxypowdercoating glass bowl•thermalresistanttemperedglassbowl reflector•deepdrawhighpurityanodizedaluminiumreflector spigot•standardspigot:7°suitableforsideentrymounting&post-topmounting(uponrequest)

•customizedspigot:0°(UponRequest)onlysuitableforsideentrymounting compliance and approvals•sirimgeneralrequirement&test IEC60598-1:2003•sirimparticularrequirement (streetlantern) IEC60598-2-3•TUVphotometryCIE121:1996 CIE70:1987•CEmarking•TUVtypetest EN55015:2006+A12007 EN61547:1995+A1:2000EN61000-3-2:2006 (classc) EN61000-3-3:1995 +A1,:2001+A2,:2005 IEC60598-2-3:2002 EN60598-2-3:2003

a

d

bc

C0 C180

C90

C270 Polar diagram : cd / 1000 lumens

0

-90 90

89.15

178.30

267.44

356.59

445.74

note : photometric result tested based on 48000lm HPS 400W clear tube



housing model

matching table

casing model lamp type lamp holder order code

S412-150 HPS 70W tubular E27 S412-150-S0070S412-150 HPS 100W tubular E40 S412-150-S0100S412-150 HPS 150W tubular E40 S412-150-S0150S412-150 MH 70W tubular E27 S412-150-M0070S412-150 MH 150W tubular E27 S412-150-M0150S412-250 HPS 250W tubular E40 S412-250-S0250 S412-250 MH 250W tubular E40 S412-250-M0250

note:specificationsaresubjecttochangewithoutpriornotice

S412

dimension

photometric curve


technical data

ingressprotection•IP66(lampcompartment)&IP54(gearcompartment)insulationclass•classIvoltage•220-240Vac50/60Hzlampwattage•70W-250Wholdertype•E27&E40ceramiclampholdermax.weight•S412-150(6.5kg)•S412-250(8.80kg)designedstandard•IEC60598-2-3spigotsize•S412-150(ø42-ø50mm)•S412-250(ø48-ø60mm)

features electrical system•built-incontrolgearsuitablefor HIDlampfrom70W-250W body frame•fullaluminiumextrudedthrough highpressuredie-castwithAKzo Nobel Interponoutdoorepoxypowdercoating glass bowl•thermalresistanttemperedglassbowl reflector•deepdrawhighpurityanodized aluminiumreflector spigot•suitableforsideentrymounting epoxy paint•lightgrey compliance•IEC60598-2-3:1997 •IEC60598-1:2003

C0 C180

C90

C270

note : photometric result tested based on 27500lm HPS 250w Clear Tube

note : photometric result tested based on 14500lm HPS / MH 150w Clear Tube

0

±180

-90 903064.62

6129.24

9193.85

12258.47

15323.09

0

±180

-90 901533.46

3066.95

4600.39

6133.86

7667.32

capacity code


: example = 150w

M = metal halide

casing model

S412-150-S 0150

200

697 590

327

S412-250W

172

557 465

200

S412-150W

S438-N

matching table

housing model lamp type lamp holder order codeS438-N HPS 150W tubular E40 S438-N-S0150S438-N HPS 250W tubular E40 S438-N-S0250S438-N MH 250W tubular E40 S438-N-M0250


features electrical system•built-incontrolgearsuitableforHIDlampsfrom150W-250W

body frame•fullaluminiumextrudedthroughhighpressuredie-castwithAKzo Nobel Interpon outdoorepoxypowdercoating

glass bowl•thermalresistanttemperedglassbowl reflector•deepdrawhighpurityanodizedaluminiumreflector

spigot•suitableforsideentrymounting compliance and approvals•sirimgeneralrequirement&testIEC60598-1

•sirimparticularrequirement(streetlantern)IEC60598-2-3

ø52

660

300 180

dimension

photometric curve


technical data

ingressprotection•IP66(lampcompartment)&IP54(gearcompartment)insulationclass•class1voltage•220-240Vac50/60Hzlampwattage•150W-250Wholdertype•E27&E40ceramicholdermaximumweight•8.8kgdesignedstandards•IEC60598-2-3spigotsize•ø42mm-ø48mm


lamp type : M = metal halide

S = high pressure sodium

H = mercury vapor

housing model


C0 C180

C90

C270 0

±180

-90 903541.92

7083.84

10625.77

14167.69

17709.61

order code

casing model lamp type lamp holder order code

S159 MH 70W tubular / bulb E27 S159-M0070S159 MH 150W tubular / bulb E27 S159-M0150S159 HPS 70W tubular / bulb E27 S159-S0070S159 HPS 150W tubular E40 S159-S0150S159 HPMV 125W bulb E27 S159-H0125


S159

features electrical system•built-incontrolgearsuitablefor HIDlampsfrom70W-150W housing•fullaluminiumextrudedthrough highpressuredie-castwithAKzo Nobel Interponoutdoorepoxypowdercoating glass bowl•thermalresistantglassbowl reflector•anodizedaluminiumreflector spigot•suitableforsideentrymounting

dimension

photometric curve

key for standard order coding :

technical data

ingressprotection•IP66(lampcompartment)&IP54(gearcompartment)insulationclass•classIvoltage•220-240Vac50/60Hzlampwattage•70W-150Wholdertype•E27&E40ceramiclampholdermaximumweight•5.5kgdesignedstandards•IEC60598-2-3spigotsize•ø50mm

0

±180

-90 901424.21

2848.42

4272.63

5696.84

7121.05


C0 C180

C90

C270

529 245

242

3 4

1 Ø50

capacity code

lamp type : M = metal halide

: example = 70W

S = high pr essur e sodium H = mer cury vapor

casing mode l

architectural lighting

order codes

model lamp type lamp holder ordering code

S1070 empty body E27 S1070-EB S1070 MH70W tubular/bulb E27 S1070-M-0070 S1070 HPS 70W tubular/bulb E27 S1070-S-0070 S1070 HPMV 80W bulb E27 S1070-H-0080 S1070 HPMV 125W bulb E27 S1070-H-0125S1070 CFL 2 x 26W tubular G24d-3 S1070-C-0226S1070 CFL 2 x 18W tubular G24d-2 S1070-C-0218

note:•EB=emptybody•specificationsaresubjecttochangewithoutpriornotice

suria wall light S1070

features Body is made of die - cast aluminium. The diffuseris made of clear injection moulded

polycarbonate with computer designed internal prism to provide a uniform light distribution in all directions. Via stainless steel screws system, the diffuser can be opened, but remains hingedon the body. The reflector is made of high purity anodized aluminium in order to maximize light output and efficiency.

application •parkinglot•shoppingcenter•parks•exteriorwallofbuildingsandanycommercialofarchitecturalwalls

dimension

front view side view back view

photometric curve


technical data

ingressprotection•IP65voltage•220-240Vac50/60Hzlamptype•CFLlamp&HIDlamp


lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor : C = compact fluorescent

casing model

S1070 H - 0125

note : photometric result tested based on 5800lm HPS 70w coated bulb

0

±180

-90 90

914.04

182.81

365.62

548.42

731.23

265 200185

310 239

order codes

model no. of lamp fitting dimension carton dimension weight (kg) qty/carton l lf w h l w h

N118 1x18W 660 445 100 107 690 230 450 12.4 10N218 2x18W 660 445 150 107 690 340 360 13.5 8N136 1x36W 1265 835 100 107 1290 230 275 13.5 6N236 2x36W 1265 835 150 107 1300 340 350 12.6 4

note:IP65weatherprooffittingwithfluorescentlamp58Wisavailableuponrequest•specificationaresubjecttochangewithputpriornotice•lf:mountingholepitch

T8 IP65 weather proof fitting

l w

lf

h

features housing•manufacturedwithstrongpolycarbonatebodyandinjectedtransparentpolycarbonatediffuser

reflector•steelplatecoatedwithepoxypowder fastening latch•stainlesssteelclip gasket•highqualityinsulationrubbergasketfor watertightsealpurpose IP rating•gearcompartment•lampcompartment compliance and approvals•sirimgeneralrequirement&test IEC60598-2-1:1997•sirimparticularrequirement IEC60598-1:2006


photometric curve

dimension

note : photometric result tested based on 2 x 36w fluorescent tube

0

±180

-90 90147.95

295.90

443.86

591.81

739.76

T5 IP65 weather proof fitting

photometric curve

dimension

model no. of lamp fitting dimension (mm) carton dimension (mm) weight l w h l w h

N114 1x14W 608 100 80 623 105 87 0.9N214 2x14W 608 100 80 623 105 87 1.0N128 1x28W 1208 57 80 1223 64 85 1.2N228 2x28W 1208 100 80 1223 105 87 1.8


0

±180

-90 9029.13

58.25

87.38

116.50

145.63

note : photometric result tested based on 1200lm 14W T5 flourescent lamp

h

h h

h

l

l w

l

l w

N114 / N214

N128 / N228

features housing•polycarbonate diffuser•injectedtransparentpolycarbonatediffuser reflector•steelplatecoatedwithwhiteepoxypowder fastening latch•stainlesssteelclip

applications

•distillationplants•boilerrooms•coldstoragerooms•residentialareas•garages

T8 IP66 stainless steel fluorescent fitting

features housing•304stainlesssteel 306stainlesssteelavailableuponrequest diffuser•thermalresistanttemperedglass fastening latch•stainlesssteelclip


model no. of lamp fitting dimension carton dimension weight (kg) l lf w h l w h

S8118 1x18W 705 495 135 75 770 160 140 2.5S8218 2x18W 705 495 195 75 770 220 140 5.0S8136 1x36W 1305 1095 135 75 1365 160 140 3.5S8236 2x36W 1305 1095 195 75 1365 220 140 6.5

note:IP66stainlesssteelfluorescentfittingwithfluorescentlamp58Wisavailableuponrequest•specificationsaresubjecttochangewithputpriornotice•lf:mountingholepitch

l

lf

top view

front view

top view

S8118 / S8218

S8236 / S8136

front view

l

lf

w

w

h

h

photometric curve

dimension

note : photometric result tested based on 2 x 36w fluorescent tube

0

±180

-90 90149.72

299.44

449.17

598.89

748.61

lighting accessories

HID lamp ballast

features rate supply voltage•220V-240V/415V50Hz/60Hz max. permissible temperature rise (∆t)•70-85ºC(∆t) rated max. operation temperature (tw)•130ºC insulation class•classF manufacturing standard•IEC61347-2-9:2003,IEC61347-1:2003 &IEC60923:2008 accreditations and certifications•international:CEmarking•domestic:SIRIM,TNB,JKR,SESCO

dimension

wiring diagram

L

REDIGNITOR YEL

BLK

3 terminal ballast (MH & SON)pulse ignitor

zH05

V042 - V022

PM

AL

N

C

BALLASTzH05

V042 - V022

L

REDIGNITOR YEL

BLK

2 & 3 Terminal Ballast (MH & SON)superimposed ignitor

PM

AL

N

C

BALLASTzH05

V042 - V022

L

2 terminal ballast (HPMV Only)

PM

AL

N

C

BALLAST

technical data

model capacity load power tw (ºC) t (ºC) capacitor watt dimension type weight (W) current factor (µF) loss (mm) (kg) (A) (pf.) (W) a b c d e

sodium/ 70 0.98 0.38 130 70 10 12 96 87 56 70 70 A 1.40metalhalide 100 1.20 0.43 130 70 15/16 15 96 87 56 70 70 A 1.45 150(LT) 1.80 0.40 130 70 20 18 120 106 56 70 70 A 2.39 250 3.00 0.42 130 70 30 25 110 102 82 99 85 A 3.88sodium 400 4.40 0.44 130 70 50 30 142 132 82 99 93 A 4.30 1000 10.30 0.42 130 70 100 74 218 158 95 133 114 B 12.0metalhalide 250 2.13 0.52 130 70 20 22 120 106 56 70 70 A 2.45 400 3.50 0.51 130 70 30 30 110 102 82 99 85 A 3.72 1000 9.00 0.52 130 70 70 53 185 177 82 100 93 A 10.80 2000 15.60 0.52 130 85 115 122 190 160 112 152 130 C 14.72 2000(415V) 9.50 0.49 130 75 50 130 190 160 112 152 130 C 15.2mercury 80 0.80 0.48 130 70 10 10 96 87 56 70 70 A 1.32 125 1.15 0.54 130 70 10 15 96 87 56 70 70 A 1.40 250 2.15 0.54 130 70 15/16 22 110 102 82 99 85 A 2.72 400 3.25 0.54 130 70 25/30 24 110 102 82 99 85 A 3.28 700 5.60 0.50 130 70 50 35 185 177 82 100 93 A 6.40 1000 7.00 0.60 130 75 50 37 185 177 82 100 93 A 7.52


a

a

a b

side view

type A

type C

type B

top view

side view top view

side view top view

b

b

e

e

c

c

d e d

d

ignitor (nylon casing)

order code

model ignitor type lamp type order code

9000PI pulse MH 250 - 2000W / HPS 150 - 1000W 9000PISP 9003 superimposed MH / HPS 70W - 400W SP 9003SP 9006 superimposed MH / HPS 70W - 150W SP9006

for domestic marketorder code

model ignitor type lamp type order code

SQ 9003 superimposed MH / HPS 70W - 400W SQ 9003


features main voltage•220V-240V50Hz/60Hz single point fixing•nyloncasingwithM8fastening maintenance free•fullyelectroniccontrol manufacturing standard•MSIEC61347-1:2003,MSIEC61347- 2-1:2003&MSIEC60927:2003 accreditations and certifications•international:CEmarking•domestic:SIRIM

dimension

wiring diagram

technical data

model input voltage (V) frequency ignition voltage max housing weight (kg) min operating temperature temperature

9000PI 220-240 50/60Hz 4.0-5.0KV 90ºC 0.076 -30ºCSP9003 220-240 50/60Hz 3.5-4.5KV 85ºC 0.13 -30ºCSP9006 220-240 50/60Hz 3.5-3.8KV 90ºC 0.06 -30ºC

for domestic marketmodel input voltage (V) frequency ignition voltage max housing weight (kg) min operating temperature temperature

SQ9003 220-240 50/60Hz 3.5-4.5KV 85ºC 0.130 -30ºC

32 36 46

30

64 74 92

33 39

SP9006 SP9003 / SQ9003 9000PI

BALLAST

L

CB

N

LpSUPER IMPOSED IGNITOR

Superimposed ignitor

SP9003 / SP9006 / SQ9003 9000PI

LAM

P

LAM

P

N

Pulse ignitor

BALLAST

L

CB

N

N

PULSEIGNITOR

order code

model ignitor type timer protection suitable lamp type IP rated order code

SP 9008 superimposed - MH & HPS 100W - 400W IP65 SP 9008SP 9008T superimposed cut off MH & HPS 100W - 400W IP65 SP 9008TSP 9009 superimposed - HPS 1000W & MH 1000W - 2000W IP65 SP 9009SP 9011 superimposed - HPS 1000W & MH 1000W - 2000W IP65 SP 9011


superimposed ignitor (aluminium casing)

dimension

wiring diagram

features main voltage•220V-240V50Hz/60Hz single point fixing•aluminiumcasingwithM8fastening maintenance free•fullyelectroniccontrol timer cut-off•abletodetectlampfailureorendof lamplife manufacturing standard•IEC60926&IEC60927 accreditations and certifications•international:CEmarking•domestic:SIRIM,TNB,JKR,SESCO

b

M8 x 10

top view

bottom viewfront view

a

Superimposed ignitor

240V

BALLAST

LL

CB

N

LpIGNITOR

PM

AL

N

technical data

ignitor model input frequency ignition voltage max housing min operating weight (kg) diameter length voltage (V) temperature temperature b a

SP9008 220-240 50/60Hz 2.8-5.0KV 105ºC -30ºC 0.14 36mm 95mmSP9008T 220-240 50/60Hz 2.8-5.0KV 105ºC -30ºC 0.14 36mm 120mmSP9009 220-240 50/60Hz 3.0-4.0KV 105ºC -30ºC 0.45 55mm 120mmSP9011 380-415 50/60Hz 4.0-5.0KV 105ºC -30ºC 0.32 55mm 92mm

IP rated remote control gear

order code

model lamp watt lamp type IP rated order code

S5100 - UA 1000W MH / HPS / HPMV IP65 S5100 - UAS5150 - UA 1500W MH IP65 S5150 - UAS5200 - UA 2000W MH IP65 S5200 - UA


features housing•highpressurealuminiumdie-casthousing withAKzo Nobel Interponoutdoorepoxy powdercoating

dimension


technical data

ingressprotection•IP65voltage•220-240Vac50Hz/60Hzlampwattage•1000W-2000Wcolourofhousing•black


lamp type : M = metal halide : S = high pressure sodium : H = mercury vapor

housing material : A = die-cast aluminium : C = cold rolled steel

usage : U = universal

casing model

S5200 U A -M 2000

S5100-UA - S5200-UA

232 250

180

ø10

200

363

remote control gear

order code

model lamp watt lamp type IP rated order code

S5100 - UC 1000W MH / HPS / HPMV IP43 S5100 - UCS5025 - OC 250W MH / HPS / HPMV IP43 S5025 - OCS5040 - OC 400W MH / HPS / HPMV IP43 S5040 - OC


features housing•highqualitycoldrolledsteelcompletewithepoxycoating

dimension


technical dataingressprotection•IP43voltage•220-240Vac50Hz/60Hzlampwattage•250W-1000Wcolourofhousing•S5100-UC-black S5025/S5040-lightgrey



housing material : A = high pressure die-cast aluminium : C = cold rolled steel

usage : O = outdoor : U = universalcasing model

S5100 U C -M 1000

S5100-UC S5025 - S5040 -OC

260 180

300

315

350

147 140 140265

ø8 x 15 (mm) slot

order code

model lamp watt lamp type order code

S5035 - IC 35W MH / HPS / HPMV S5035 - IC




indoor remote control gear

dimension

applicable lamp type

brand lamp typePhilips CDM Master Color E27 par bulb, G12 single ended, RX7s double endedGE Constant Color E27 par bulb, G12 single ended, RX7s double endedOsram POWERBALL E27 par bulb, G12 single ended, RX7s double endedEYE CERA ARC / COLOR ARC E27 par bulb, G12 single ended, RX7s double ended


technical data

voltage•220-240Vac50/60Hzlampwattage•HID35W-150Wcolourofhousing•lightgrey

features electrical system•remotecontrolgearsuitableforceramicHIDlampsfrom35W-150Wwithventilatedcontrolcompartment

housing•epoxypowdercoatedbodytoincreasethereliabilityoftheenclosure

remote control gear

10

105

57

12

270

219

88

ø5

ø8



housing material : C = cold rolled steel

usage : U = universal

casing model

S5035 I C - M 0150

emergency lighting module (power pack)

order code

model lamp type emergency duration battery rating weight (kg)

ELM PLCE PLCE 18W & below 1 - 3 hours 6V 4.5AH sealed lead acid 1.4ELM 718 (PLC) PLC 18W & below 2 - 3 hours 6V 4.5AH sealed lead acid 1.4ELM 726 NC (PLC) PLC 26W & below 1 - 3 hours 6V 4.0AH nickel cadmium 1.5(nickel - cadmium)


dimension

model dimension (mm) a b c d eELM PLCE 74 221 52 187 10ELM 718 (PLC) 74 221 52 187 10ELM726NC (PLC) 74 285 39 248 10(nickel-cadmium)

wiring diagram

technical data

voltage•220-240Vac50Hzbatterylife•500cyclesonstandbychargingtime:24hoursafterinstallationoremergencyused

features installation•installinminutes.nospecialhardwareortoolsisrequired

battery unit•overchargeprotectionprovidedbycircuitchargerforextendedbatterylife

•longlifesealedleadacidbattery/nickel-cadmiumbattery

housing•coldrolledsteelcompletewithepoxypowdercoatedpaint

manufacturing standard•MS619:Part:102:SECT102.221985(P)

b

d

e

ac

LN

PLCE Lamp

Model : ELM PLCERated Voltage : 220V - 240VACFrequency : 50Hz - 60HzEmer Duration : 2-3hrsCharging : 24hrsLamp : PLC 7W-18W (PHILIPS) From switch live

Switch

PLC Lamp

Switch

L

ELM PLCE ELM 718 PLC ELM 726NC (PLC)(nickel - cadmium)

N

UNSWITCHED SUPPLY

Model : ELM718Rated Voltage : 220V - 240VACFrequency : 50Hz - 60HzEmer Duration : 2-3hrsCharging : 24hrsLamp : PLC 7W-18W From switch live

UNSWITCHED SUPPLY

LN

Ballast

Model : ELM726NCRated Voltage : 220V ~ 240VacFrequency : 50Hz ~ 60HzEmer Duration : 1 ~ 3hrsCharging : 24hrsLamp : PLC 7W ~ 26W

From switch live

UNSWITCHED SUPPLY

PLC Lamp

Switch

commercial lighting

With Lighting Tools into the Future

Thoughts are created in heads, are formulated into ideas and grow to become solutions. The more heads used and the more knowledge, experience, creativity and passion brought into these processes, the better the result. Together we have a rich source of experience gained from countless successfully.

Whether your project is at the initial planning stage or in the final stages of completion, we can offer professional light planning and technical backup service using the latest lighting design software, DIALux, to verify the lighting level as it is fundamental to obtain correct illumination for different task areas.

From projects as large as lighting the streets of a city, factory or warehouse down to interior spaces, DIALux can produce accurate results in the horizontal, vertical or any object surfaces, taking into account reflections, shading, from partitions or objects.

Our design team is able to work out a complete design and simulation of a light system from consulting, idea drafting, visualization, up to final presentation of a lighting project.

ME series [ Light cast recessed luminaires-HID ]ME S15118ME S15121ME S15124ME S15127

ME S15118 - adjustable projector

Colour Model Lamp holder Weight (kg)

White ME S15118 G12 1.05

ME S15121- adjustable projector


White ME S15121 E27 1.05

Dimension

ME S15118 ME S15121

ME S15124 & ME S15127

Description

Housing Material : Die-cast aluminiumTrim Material : Die-cast aluminiumReflector : High purity anodized

aluminiumLamp Type : CDM-T / CDM- R PAR 30Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 & E27 Lamp holder

conforming to EN/VDE standard

CDM-7-70W/842 G12

ME S15124 / ME 15127- fixed projector

Colour Model fix projector (degree) Lamp holder Weight (kg)

White ME S15124 / ME S15127 10 / 45 G12 1.05

SO series [ Light cast recessed luminaires-HID ]

Dimension

SO S10109 SO S10112

Description

Housing Material : Cold roll steelTrim Material : Die-cast aluminiumReflector : High purity anodized

aluminium Lamp Type : CDM-T / CDM-R PAR 30Wattage : 35W, 70W, & 150WFinishing : Epoxy powder coatingLamp Holder : G12 & E27 Lamp holder


SO S10109


White SO S10109 G12 0.63

SO S10112


White SO S10112 E27 0.53

FA series [ Light cast recessed luminaires-HID ]

FA S15112


White FA S15112 G12 0.70

FA S15115


White FA S15115 E27 0.70

Dimension

FA S15112 FA S15115

143 143

155 155

143 143

155 155

Description

Housing Material : Die-cast aluminiumTrim Material : Die-cast aluminiumReflector : High purity anodized

aluminiumLamp Type : CDM-T / CDM- R PAR 30Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 & E27 Lamp holder


PA S10115 (18W max 2 x G24d-2)

PA S10175 (18W max 2 x G24d-2)

PA S10133 (26W max 2 x G24d-3)

PA S10178 (26W max 2 x G24d-3)

TE S10151 (18W max 2 x G24d-2)

TE S10163 (26W max 2 x G24d-3)

PA series [ Light cast recessed luminaires-CFL ]

108

189

Dimension

PA S10115 & PA S10175

PA S10115 (max 2 x 18W)


White PA S10115 G24d-2 / G24q-2 0.8

C/W beehive reflector match with PA S10118, PA S10121 & PA S10124

PA S10175 (max 2 x 18W)


White PA S10175 G24d-2 / G24q-2 0.71

C/W clear anodized reflector match with PA S10127 & PA S10130

accesories– PA S10118 trim type


White PA S10118 6 ” open trim 0.12

Example :

PA S10115 + PA S10124

housing code

housing model

trim type code

Order code

For open trim, semi frosted glass trim andfrosted glass trim (PA S10115) is the housing code. You need to complete the ordering code with the type of trims.

For turbo trim and cross trim (PA S10175) is the housing code. You need to complete the ordering code with the type of trims.

108

189

Lamp Type : 2 x PLC lampsWattage : Max 18WFinishing : Epoxy powder coatingLamp Holder : G24d-2 / 2 pin for magnetic ballast G24q-2 / 4 pin for electronic ballast

Description


aluminium


Colour Model Description Weight (kg)

White PA S10121 6 ” trim with frosted glass 0.27



White PA S10124 6 ” trim with semi-frosted glass 0.27



White PA S10127 6 ” trim with turbo 0.28



White PA S10130 6 ” trim with cross 0.25

45º 45º

30º 15º 0º 15º 30º

90º 90º

105º 105º

75º 75º

200

250

300

15060º 60º 100

cd/klm C0-C180 C90-C270

2 x FDX13/840-2P PLC LAMP

45º 45º

30º 15º 0º 15º 30º

90º 90º

105º 105º

75º 75º

200

250

300

15060º 60º 100

cd/klm C0-C180 C90-C270


45º 45º

30º 15º 0º 15º 30º

90º 90º

105º 105º

75º 75º

200

250

300

15060º 60º 100

cd/klm C0-C180 C90-C270


45º 45º

30º 15º 0º 15º 30º

90º 90º

105º 105º

75º 75º

200

250

300

15060º 60º 100

cd/klm C0-C180 C90-C270


133

Dimension

PA S10133 & PA S10178

PA S10133 (max 2 x 26W)


White PA S10133 G24d-3 / G24q-3 0.92

C/W beehive reflector match with PA S10136, PA S10139 & PA S10142

PA S10178 (max 2 x 26W)Colour Model Lamp holder Weight (kg)

White PA S10178 G24d-3 / G24q-3 0.76

C/W clear anodized reflector match with PA S10145 & PA S10148



White PA S10136 8 ” open trim 0.14

Example :

PA S10133 + PA S10136

housing codehousing model

trim type code

PA series [ Light cast recessed luminaires-CFL ]

Order code

For open trim, semi frosted glass trim andfrosted glass trim (PA S10133) is the housing code. You need to complete the ordering code with the type of trims.

For turbo trim and cross trim (PA S10178) is the housing code. You need to complete the ordering code with the type of trims.

133


Colour Model Description Weight (kg) White PA S10139 8 ” trim with frosted glass 0.36



White PA S10142 8 ” trim with semi-frosted glass 0.36



White PA S10145 8 ” trim with turbo 0.33



White PA S10148 8 ” trim with cross 0.29

Lamp Type : 2 x PLC lampsWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : G24d-3 / 2 pin for magnetic ballast G24q-3 / 4 pin for elctronic ballast

Description


aluminium

Dimension

TE S10151

TE S10151 (max 2x 18W)


White TE S10151 * G24d-2 / G24q -2 0.73

* G 24d - 2 for magnet ballast G 24q - 2 for electronics ballast

accesories– TE S10154 reflector

Model Description Weight (kg)

TE S10154 Clear anodized aluminium reflector 0.08



TE S10157 Matt finished aluminium reflector 0.08



TE S10160 Beehive aluminium reflector 0.08

Order code

TE S10151 is the housing code. Youneed to complete the ordering code withthe type of reflectors. Example :TE S10151 + TE S10157

housing codehousing model reflector code

TE series [ Light cast recessed luminaires-CFL ]

Description

Housing Material : Cold roll steelTrim Material : Cold roll steelReflector : High purity anodized

aluminium Lamp Type : 2 x PLC lampsWattage : Max 18WFinishing : Epoxy powder coatingLamp Holder : G24d-2 / 2 pin G24q-2 / 4 pin

190

190

TE S10163 (max 2 x 26W)


White TE S10163 * G24d-3 / G24q - 3 0.85

* G 24d - 3 for magnet ballast G 24q - 3 for electronics ballast



TE S10166 Clear anodized aluminium reflector 0.13



TE S10169 Matt finished aluminium reflector 0.13



TE S10172 Beehive aluminium reflector 0.13

Order code

TE S10163 is the housing code. Youneed to complete the ordering code withthe type of reflectors. Example :TE S10163 + TE S10169

housing codehousing model reflector code

TE series [ Light cast recessed luminaires-CFL ]

Dimension

TE S10163

Description


aluminium Lamp Type : 2 x PLC lampsWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : G24d-3 / 2 pin G24q-3 / 4 pin

ET S10181 Beehive reflector

ET S10184 Matt anodised reflector

ET S10187 Sand blasted + clear anodised reflector

ET S10190 Beehive reflector + semi frosted glass

ET series [ Light cast recessed luminaires-CFL ]

ET S10181 Beehive reflector

ET S10184 Matt anodised reflector

ET S10187 Sand blasted + clear anodised reflector

ET S10190 Beehive reflector + semi frosted glass

ET S10181 - Beehive reflector


White ET S10181 G24d-3 0.80

ET S10184 - Matt anodised reflector


White ET S10184 G24d-3 0.80

ET S10187 - Sand blasted + clear anodised reflector


White ET S10187 G24d-3 0.80

ET S10190 - Beehive reflector + semi-frosted glass


White ET S10190 G24d-3 0.80

Dimension

ET S10181, ET S10184,ET S10187 & ET S10190

228

190

228

190

228

190

Description

Housing Material : Cold roll steelTrim Material : Cold roll steel & die-cast aluminiumReflector : High purity anodized

aluminiumLamp Type : 1x PLC lampWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : G24d-3 / 2 pin

MA spot head series [ modular recessed luminaires ]

Order code

MA S17106 is the housing code. You needto complete the ordering code with thehousing and spot heads. Example :

MA S17109 + MA S17118 + S17121

housing code another spot

housing model head code spot head code

MA series housing model description


aluminium Lamp Type : AR111, CDM-T & CDM-R PAR 30Wattage : Max 35W – 150WFinishing : Epoxy powder coatingLamp Holder : G53 & G12 & E27 Lamp

holder conforming to EN/VDE standard

Dimension

MA S17106 MA S17109 MA S17112

MA S17106

Colour Model Weight (kg)

White MA S17106 1.15

MA S17109


White MA S17109 1.9

MA S17112


White MA S17112 2.6

Dimension

MA S17118 CDM-T (35W / 70W / MA S17121 PAR30 / CDM-R (35W / 70W150W 1 x G12) max 1 x E27)

MA S17118 CDM-T (35W / 70W / 150W max 1 x G12)


White MA S17118 G12 0.36

MA S17121 PAR30 / CDM-R (35W / 70W max 1 x E27)


White MA S17121 E27 0.24

MA spot head series description

MA Spot Head Series – S17118 Trim Material : Die – Cast AluminiumReflector : High purity anodized

aluminiumLamp Type : CDM-TWattage : Max 35W – 150WFinishing : Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE

standard

MA Spot Head Series – S17121Trim Material : Die – Cast AluminiumLamp Type : CDM-R PAR30Wattage : Max 35W – 70WFinishing : Epoxy powder coatingLamp Holder : E27a Lamp holder conforming to EN/VDE

standard

KR series [ ceiling mounted luminaires ]

Dimension

KR S12118

KR S12118


White KR S12118 G12 2.0

Description

Housing Material : High heat resistance polypropyleneReflector : High purity anodized

aluminiumGear : Electronic ballast Lamp Type : CDM-T Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE

standard

35W

35W

TA S12100 (PLCE 26W max 1 x E27)

TA series [ ceiling mounted luminaires ]

Dimension

TA S12100

Description

TA Series Housing Material : Cold roll steelReflector : High purity anodized

aluminiumLamp Type : PLCE lampWattage : Max 26WFinishing : Epoxy powder coatingLamp Holder : E27 Lamp holder conforming to EN/VDE

standard

TA S12100 (PLCE 26W max 1 x E27)


White TA S12100 E27 1.4

298

195

298

195

298

195

Dimension

IS S12103 (PLCE 20W max 1 x E27)

Description

IS Series Housing Material : Cold roll steelReflector : High purity anodized


standard

IS S12103 (PLCE 20W max 1 x E27) beehive and frosted facet projector


White IS S12103 E27 0.95

IS series [ ceiling mounted luminaires ]

Dimension

IR S12106 (PLCE 26W max 1 x E27) IR S12109 (PLC 18W max 2 x G24d-2)

IR S12106 (PLCE 26W max 1 x E27)


White IR S12106 E27 0.9

IR S12109 (PLC 18W max 2 x G24d-2)


White IR S12109 G24d-2 1.15

* Black and silver available upon request

IR series [ ceiling mounted luminaires ]

Description

IR Series – S12106Housing Material : Cold roll steelReflector : High purity anodized


standard

IR Series – S12109Housing Material : Cold roll steelReflector : High purity anodized

aluminiumLamp Type : 2 x PLC lampsWattage : Max 18WFinishing : Epoxy powder coatingLamp Holder : G24d-2 / 2 pin

XE S12112

XE S12115

XE S13106

XE S13109

XE series [ track light and accessories ]

XE S12112 (surface mounted)


White XE S12112 E27 1.25

XE S13106 (3-phase track mounted)


White XE S13106 E27 1.25

Dimension

XE S12112 XE S13106

193

115 115187217

207

193

115 115187217

207

193

115 115187217

207

193

115 115187217

207

Description

XE Series – S12112 & S13106Housing Material : Die – Cast AluminiumReflector : High purity anodized

aluminiumMounting Method : Surface & 3 phase trackLamp Type : CDM-R PAR30Wattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : E27 Lamp holder conforming to EN/VDE

standard

Dimension

XE S12115 XE S13109

193

115 115187217

207

193

115 115187217

207

Description

XE Series – S12115 & S13109Housing Material : Die – Cast AluminiumReflector : High purity anodized

aluminiumMounting Method : Surface & 3 phase trackLamp Type : CDM-TWattage : 35W & 70WFinishing : Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE

standard

XE S12115 (surface mounted)

Colour Model Lamp holde Weight (kg)

White XE S12115 G12 1.25

XE S13109 (3-phase track mounted)


White XE S13109 G12 1.25

LE S13100 20 degree reflector

LE S13103 45 degree reflector

LE series [ track light and accessories ]

Dimension

LE S13100 20 degree reflector & LE S13103 45 degree reflector

Description

LE Series – S13100Housing Material : Die – Cast AluminiumReflector : 20° & 45° High purity

anodized aluminiumMounting method : 3 phase trackLamp Type : CDM-TWattage : Max 70WFinishing : RAL 9016 Epoxy powder coatingLamp Holder : G12 Lamp holder conforming to EN/VDE

standard

LE S13100 20 degree reflector (3-phase track mounted)


White LE S13100 G12 1.10

LE S13103 45 degree reflector (3-phase track mounted)


White LE S13103 G12 1.10

* Black and silver available upon request

accessories – MO S18100

Colour Description

White 3 circuit trunking rail 1000 mm without power connector and end cap


Colour Description



Colour Description


MO series [ track light and accessories ]

Description

MO three-circuit system lets you select the style of lighting that’s right for the being lit.

Thanks to the system’s three built-in independently controlled circuits, a twist of the dial lets you switch circuits, makes it easy to control lightings to match changes in time of day, furnishing and decorations, and other characteristics of the area being lit. This multiple-circuit system makes a convenient addition to spaces ranging from department stores to art museums. Its refined design ensures that even long duct runs will have a beautiful, finished appearance.


Colour Description

White 3 circuit trunking rail power connector

accesories– MO S20100

Colour Description

White 3 circuit trunking rail end capTec


Colour Description

White 3 circuit trunking rail series T type connector (right)


Colour Description

White 3 circuit trunking rail series T type connector (left)


Colour Description

White 3 circuit trunking rail series L type connector (right)


Colour Description

White 3 circuit trunking rail series L type connector (left)

CO S14100

CO S14103

CO series [ pendant luminaires ]

CO S14100


CO S14100 16” PC refractor & AL pendant head 1.50

* PC diffuser is available

CO S14103


CO S14103 14” AL reflector & AL pendant head 1.70

Dimension

CO S14100 CO S14103

Description

CO Series – S14100Head Material : Extruded aluminiumReflector : Polycarbonate Diffuser : Polycarbonate Lamp Type : HID & PLCE lampWattage : Max 150WFinishing : Epoxy powder coatingLamp Holder : E27

CO Series – S14103Head Material : Extruded aluminiumReflector : 2mm Thick 99.9% super

purity aluminium Glass Visor : Sand blasted tempered

glassClip : Technopolymer latchLamp Type : HID & PLCE lampWattage : Max 150WFinishing : Epoxy powder coatingLamp Holder : E27

outdoor commercial lighting

galileo

dimension photometric

galileo L130701

90

note : photometric result tested based on 6000lm HPS70w tube

0

±180

-90

317.80

494.24

370.68

247.12

123.56

Ø738

note: standard 3m pole comes with the luminaire. Other pole height is available upon request.

3400

3000

features •��elegance�lighting�system�designed�for�discharge�lamps.The�system�is�designed�for�efficiently�illuminating�the�desired�areas.

•��corrosion�resistant�die-cast��aluminium�optical�housing�with weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.

•��closed�by�opal�UV�stabilized�PMMA�diffuser,�provide�soft�light�with�a�large�illumination�area�suitable�for�external�applications.

•��poles�are�available�in�galvanised�steel�with�primary�powder�coating�for�high�corrosion�resistance�on�request.

technical specification input voltage220�-�240Vac

lamp typeHID�lamp

wattage35w�-�70w

lamp holderE27

spigot sizeø76mm

insulation classclass�1

ingress protectionIP54

maximum weight6.0�kg�(without�pole�and�gear)

order code


GALILEO�L130701�MH35w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0035GALILEO�L130701�MH70w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0070GALILEO�L130701�MH35w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0035-PGALILEO�L130701�MH70w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130701-M0070-PGALILEO�L130701�HPS70w�w/o�pole� tubular�/�bulb� E27� GALILEO�L130701-S0070 GALILEO�L130701�HPS70w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130701-S0070-P

note : specifications are subject to change without prior notice *M: Metal halide S: Sodium P: Pole

application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�public�&�private�areas•�pedestrian�precincts

base dimension

galileo L130702

Ø738

3400

3000


dimension

application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�garden•�pedestrian�precincts

features •��elegance�lighting�system�designed�for�discharge�lamps.�The�system�is�designed�for�efficiently�illuminating�the�desired�areas.

•��corrosion�resistant�die-cast aluminium�optical�housing�with��weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.

•��the�optical�system�used�in��conjunction�with�the�UV-stabilized�transparent�PMMA�diffuser�version�consists�of�an�aluminium�louver�system�providing�glare�control.�

•��poles�are�available�in�galvanised��steel�with�primary�powder�coating�for�high�corrosion�resistance�on�request.


lamp typeHID�lamp


lamp holderE27

spigot sizeø76mm




90


0

±180

-90

606.57

485.26

363.94

242.63

121.31

photometric

order code




base dimension

galileo L130703

90


0

±180

-90

599.19

479.35

359.51

239.68

119.84

Ø730

Ø140

3500

3000


dimension


lamp typeHID�lamp


lamp holderE27

spigot sizeø76mm




application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�hotel•�pedestrian�precincts


•��corrosion�resistant�die-cast��aluminium�optical�Canopy�surface�and�mast�mounting�element�coated�in�high-grade,�weather�resistant�epoxy�powder�provide�the�superior�quality�finish�for�all�weather�conditions.

•��t�he�optical�system�used�� in�conjunction�with�the�transparent�PMMA�diffuser�version�consists�of�an�aluminium�louver�system�providing�glare�control.�

•��poles�are�available�in�galvanised� �steel�with�primary�powder�coating��for�high�corrosion�resistance�on�request.

photometric

order code




base dimension

galileo L130704

90


0

±180

-90

1161.82

929.46

697.09

464.73

232.36

Ø738

3500

3000


dimension


photometric


•��corrosion�resistant�die-cast�� aluminium�optical�housing�with �weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.

•��poles�are�available�in�galvanised��steel�with�primary�powder�coating�for�high�corrosion�resistance�on�request.


lamp typeHID�lamp

wattage70w�-�150w (250w�is�available�upon�request)

lamp holderE27�/�E40

spigot sizeø76mm



maximum weight10.5�kg�(complete�with�gear�but�without�pole)

order code


GALILEO�L130704�MH70w�w/o�pole�� tubular�/�bulb� E27� GALILEO�L130704-M0070GALILEO�L130704�MH150w�w/o�pole� tubular�/�bulb� E27�� GALILEO�L130704-M0150GALILEO�L130704�MH70w�c/w�pole�� tubular�/�bulb� E27� GALILEO�L130704-M0070-PGALILEO�L130704�MH150w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130704-M0150-PGALILEO�L130704�HPS70w�w/o�pole� tubular�/�bulb� E27� GALILEO�L130704-S0070 GALILEO�L130704�HPS150w�w/o�pole� tubular�/�bulb� E27�/�E40� GALILEO�L130704-S0150 GALILEO�L130704�HPS70w�c/w�pole� tubular�/�bulb� E27� GALILEO�L130704-S0070-P GALILEO�L130704�HPS150w�c/w�pole� tubular�/�bulb� E27�/�E40� GALILEO�L130704-S0150-P

note�:�specifications�are�subject�to�change�without�prior�notice��*M:�Metal�halide��S:�Sodium��P:�Pole

base dimension

galileo L130705

3800

note: standard 3m pole comes with the luminaire. Others pole height is available upon request.

870

dimension


lamp typeHID�lamp


lamp holderG12

spigot sizeø114mm




application •�residential�&�commercial�areas•�parks•�city�centers•�car�parks•�hotel•�pedestrian�precincts

features •��corrosion�resistant�die-cast�aluminium�optical�housing�with weather-resistant�epoxy�powder�coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.

•��closed�by�a�toughened�glass�

and�durable�silicone�rubber�gaskets.�

•��high�polymer�composite�

canopy�for�secondary�reflector�technology�suitable�for�outdoor�use.�

•��special�mirror�coating�on�

the�secondary�reflector�to withstand�extremely�bad�weather,�provide�soft�light�with�a�large�illumination�area.

photometric

90


0

±180

-90

6671.98

5337.58

4003.19

2668.79

1334.40

order code


GALILEO�L130705�MH35w�w/o�pole� tubular�� G12� GALILEO�L130705-M0035GALILEO�L130705�MH70w�w/o�pole� tubular� � G12� GALILEO�L130705-M0070GALILEO�L130705�MH150w�w/o�pole� tubular� � G12� GALILEO�L130705-M0150GALILEO�L130705�MH35w�c/w�pole� tubular� � G12� GALILEO�L130705-M0035-PGALILEO�L130705�MH70w�c/w�pole� tubular� � G12� GALILEO�L130705-M0070-P GALILEO�L130705�MH150w�c/w�pole� tubular� � G12� GALILEO�L130705-M0150-P

note : specifications are subject to change without prior notice *M: Metal halide P: Pole

base dimension

galileo L130706

90


0

±180

-90

4689.63

3751.70

2813.78

1875.85

937.93

Ø800

Ø140

3400


dimension



lamp typeHID�lamp


lamp holderG12

spigot sizeø76mm



maximum weight12.5�kg�(complete�with�gear�but�without�pole)

features •�corrosion�resistant�die-cast�� aluminium�optical�housing�with � �weather-resistant�epoxy�powder��coating�and�stainless�steel�screws��to�provide�the�superior�quality�finish�for�all�weather�conditions.

•�closed�by�a�toughened�glass�and�� durable�silicone�rubber�gaskets.�

•��metal�canopy�for�secondary�reflector�technology�� suitable�for�outdoor�use.�

•��special�mirror�coating�on�the�

secondary�reflector�withstand�extremely�bad�weather,�provide�soft�light�with�a�large�illumination�area.

photometric

order code


GALILEO�L130706�MH35w�w/o�pole� tubular� � G12� GALILEO�L130706-M0035GALILEO�L130706�MH70w�w/o�pole� tubular� � G12� GALILEO�L130706-M0070GALILEO�L130706�MH150w�w/o�pole� tubular� � G12� GALILEO�L130705-M0150GALILEO�L130706�MH35w�c/w�pole� tubular� � G12� GALILEO�L130705-M0035-PGALILEO�L130706�MH70w�c/w�pole� tubular� � G12� GALILEO�L130706-M0070-P GALILEO�L130706�MH150w�c/w�pole� tubular� � G12� GALILEO�L130706-M0150-P

note : specifications are subject to change without prior notice *M: Metal halide P: Pole

base dimension

brentano

brentano B140802

90

note : photometric result tested based on PLCE 20w lamp

0

±180

-90

47.63

38.10

28.58

19.05

9.53

200

230

600

130

4-Ø12

application •�gardens•�residential�areas•�walkways•�hotel�premises•�parks•�cycle�tracks

photometric


lamp typeenergy�saving�lamp

wattagePLCE�18-26w

lamp holderE27



maximum weight6.8�kg

dimension

features •��elegance�lighting�system�designed�for�energy�saving�lamps.The�system��is�designed�for�efficiently�illuminating�the�desired�areas.

•��high�quality�cold�roll�steel�optical��housing�with�weather�resistant��epoxy�powder�coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.

order code


BRENTANO�B140802� energy�saving� E27� � BRENTANO�B140802 � lamp�PLCE � 18-26w note�:�specifications�are�subject�to�change�without�prior�notice

220

900

3-Ø12

260

brentano B140803 application •�gardens•�residential�areas•�pathways•�hotel�premises•�parks•�cycle�tracks

photometric




lamp holderE27




dimension

features •��elegance�lighting�system�designed�for�energy�saving�lamps.The�system�is�designed�for�efficiently�illuminating�the�desired�areas.


•��closed�by�heat�resistant�polycarbonate�providing�rotationally�symmetrical�light�distribution�with�glare-free�lighting�design.

90


0

±180

-90

64.47

51.58

38.68

25.79

12.89

order code


BRENTANO�B140803� energy�saving�� E27� � BRENTANO�B140803 � � lamp�PLCE � � 18-26w

note�:�specifications�are�subject�to�change�without�prior�notice

550

160

4-Ø12

230

160

brentano B140804 application •�gardens•�residential�areas•�driveways•�hotel�premises•�parks•�cycle�tracks

photometric




lamp holderE27




dimension

features •��elegance�lighting�system�designed�for�energy�saving�lamps.�These�architecturally�designed�bollards�are�providing�a�pleasant�light�distribution.


90


0

±180

-90

49.72

39.78

29.83

19.89

9.94

order code

model lamp type lamp holder order code BRENTANO�B140804� energy�saving�� E27� BRENTANO�B140804 � � lamp�PLCE � � 18-26w


850

3-Ø12

Ø219

Ø140

brentano B140805

application • gardens• residential areas• walkways• hotel premises• parks• cycle tracks

photometric

technical specification input voltage220 - 240Vac

lamp typeHID lamp

wattage70W

lamp holderE27

insulation classclass 1


maximum weight13.8 kg (complete with gear)

dimension

features • elegance lighting system

designed for discharge lamps.The system is designed for efficiently illuminating the desired areas.

• corrosion resistant die-cast aluminium optical housing with weather resistant epoxy powder coating and stainless steel screws to provide the superior quality finish for all weather conditions.

• closed by milk-white UV-stabilized PMMA diffuser polycarbonate providing rotationally symmetrical light distribution with glare free lighting.

90

note : photometric result tested based on 6000lm MH70w bulb

0

±180

-90

271.05

216.84

162.63

108.42

54.21

order code


BRENTANO B140805 MH 70w tubular / bulb E27 BRENTANO B140805-M0070 BRENTANO B140805 HPS 70w tubular / bulb E27 BRENTANO B140805-S0070

note : specifications are subject to change without prior notice *M: Metal halide S: Sodium

horeca, elano, cavalry, fagon

horeca W100101

90

note : photometric result tested based on 12500lm MH150w Rx7S

0

±180

-90

1996.78

1597.42

1198.07

798.71

399.36

365

177

180

dimension

features •��surface�washers�with�efficient�up�down�light�distribution�for�discharge�lamps�providing�direct�illumination�which�suitable�for�the�in-depth�illumination�of�surfaces�for�the�purposes�of �visual�continuity�and�highlighting �the�areas.

•��these�new�designed�wall�recessed�luminaires�are�technically�and�decoratively�developed�with�a�high�ingress�protection�IP65�particularly�� in�corrosive�environmental �conditions.

•��body�component�are�constructed�from�corrosion�resistant�die-cast�aluminium�and�coating�with�weather-resistant�epoxy�powder.�Heat�resistant�toughened�tempered�� glass�cover.


lamp typedouble�ended�HID�lamp


lamp holder1�x�Rx7S



maximum weight5.5�kg�(complete�with�gear)

photometric

application •�historical�buildings•�churches•�theatres•�museums•�passageways•�corridors�areas•�exhibitions�halls

order code


HORECA�W100101�MH70w� double�ended� Rx7S� � HORECA�W100101-M0070HORECA�W100101�MH150w� double�ended� Rx7S� � HORECA�W100101-M0150HORECA�W100101�HPS70w� double�ended� Rx7S� � HORECA�W100101-S0070 HORECA�W100101�HPS150w� double�ended� Rx7S� � HORECA�W100101-S0150

note�:�specifications�are�subject�to�change�without�prior�notice��*M:�Metal�halide��S:�Sodium

elano W100201, W100202 & W100203

90

note : photometric result tested based on 5500lm MH70w Rx7S

0

±180

-90

2370.48

1896.38

1422.29

948.19

474.10

115 210

177

dimension

features •��surface�washers�with�efficient �light�distribution�for�discharge�lamps�providing�direct�illumination�which�suitable�for�the�in-depth�illumination�of�surfaces�for�the�purposes�of�visual�continuity�and�highlighting�the�areas.

•��these�new�designed�wall�recessed�luminaires�are�technically�and�decoratively�developed�with�a�high�� ingress�protection�IP65�particularly�in�corrosive�environmental�conditions.

•��body�component�are�constructed�from�corrosion�resistant�die-cast�aluminium�and�coating�with�weather��resistant�epoxy�powder.�Heat��resistant�toughened�tempered��glass�cover.


lamp typedouble�ended�HID�lamp


lamp holder1�x�Rx7S




photometric


order code

model lamp type lamp no up beam wide up beam narrow up beam

ELANO�W100201�MH70w� double�ended� Rx7S� ELANO�W100201-M0070� ELANO�W100202-M0070� ELANO�W100203-M0070ELANO�W100201�MH150w� double�ended� Rx7S� ELANO�W100201-M0150� ELANO�W100202-M0150� ELANO�W100203-M0150ELANO�W100201�HPS70w� double�ended� Rx7S� ELANO�W100201-S0070� ELANO�W100202-S0070� ELANO�W100203-S0070ELANO�W100201�HPS150w� double�ended� Rx7S� ELANO�W100201-S0150� ELANO�W100202-S0150� ELANO�W100203-S0150

note�:�specifications�are�subject�to�change�without�prior�notice��*M:�Metal�halide��S:�Sodium

cavalry W100301

90

note : photometric result tested based on 2x 100w PAR30 Halogen E27

0

±180

-90

8630.27

6904.22

5178.16

3452.11

1726.05148

341 221

dimension

features •��ideally�designed�to�illuminate�the�wall�and�column�on�vertical�surfaces�with�beam�distribution�upward�and�downward�light�source.

•��high�corrosion�resistance�die-cast�and�extrusion�aluminium�housing�with�clear�heat�resistant�tempered�glass.

•��stainless�steel�screws�and�durable��silicone�rubber�gasket�to�enhance�the�ingress�protection�of�the�luminaire�against�all�weather�conditions.

•��anodised�high�purity�� aluminium�reflector�design�for�two�directional’s�up�and�down�light�distribution�use�two�lamps.


lamp type2�x�PAR�30�Halogen�lamp

wattagemax�100w

lamp holder2�x�E27




photometric

application •�architectural�structures•�condominiums•�theatres•�museums•�corridors�areas•�exhibitions�halls

order code


CAVALRY�W100301� Halogen�/�PAR30� E27� � CAVALRY�W100301

note�:�specifications�are�subject�to�change�without�prior�notice�

cavalry W100302

90

note : photometric result tested based on 2x 3500lm MH35w tube

0

±180

-90

2089.80

1671.84

1253.88

835.92

417.96

dimension

features •��ideal�is�designed�to�illuminate�the�wall�and�column�on�vertical�surfaces�with�beam�distribution�upward�and�downward�light�source.

•��high�corrosion�resistance�die-cast�and�extrusion�aluminium�housing�with�clear�heat�resistant�tempered�glass.

•��stainless�steel�screws�and�durable�silicone�rubber�gasket�to�enhance�the�ingress�protection�of�the�luminaire�� against�all�weather�conditions.

•��two�pieces�anodised�high�purity��aluminium�reflector�design�for�two�directional’s�up�and�down�light�distribution�use�two�lamps.


lamp type2�x�HID�lamp

wattage35w

lamp holder2�x�G12




photometric

application •�architectural�structures•�condominiums•�theatres•�museums•�corridors�areas•�exhibitions�halls

order code


CAVALRY�W100302�MH35w� tubular� � G12� CAVALRY�W100302-M0035

note�:�specifications�are�subject�to�change�without�prior�notice��*M:�Metal�halide

148

510 221

fagon W100501 (recessed�mounted)

90

note : photometric result tested based on 1800lm PLC26w

0

±180

-90

68.32

54.66

40.99

27.33

13.66

265

120

107

dimension

features •��this�wall�recessed�unit�provides�the�most�pleasing�and�even�light�distribution�which�facilitates�safe�pedestrian�traffic�amongst�walkways�and�stairways�by�creating�visual�continuity�and�highlighting�the�walkways.

•��the�energy�saving�bulb�have�� significantly�reduced�the�power��consumption�of�the�luminaires�thus�reducing�the�heat�generated�and�the�associated�running�costs.

•��corrosion�resistant�die-cast�aluminium�body�and�frosted�glass�lens.


lamp typePLC�lamp

wattagemax.�26W

lamp holderG24D-3




photometric


order code


FAGON�W100501�PLC18w� PLC18w� G24d-3� FAGON�W100501-PLC0018 FAGON�W100501�PLC26w� PLC26w� G24d-3� FAGON�W100501-PLC0026


fagon W100502 (surface�mounted)

90


0

±180

-90

68.32

54.66

40.99

27.33

13.66

dimension

features •��this�wall�surface�unit�provides�the��most�pleasing�and�even�light�� distribution�which�facilitates�safe �pedestrian�traffic�amongst�walkways�and�stairways�by�creating�visual�continuity�and�highlighting�the�walkways.

•��the�energy�saving�bulb�have�� significantly�reduced�the�power�consumption�of�the�luminaires�thus�reducing�the�heat�generated�and�the�associated�running�costs.



lamp typePLC�lamp

wattagemax.�26W

lamp holderG24D-3




photometric


order code


FAGON�W100502�PLC�18w� PLC18w� G24d-2� FAGON�W100502-PLC0018 FAGON�W100502�PLC�26w� PLC26w� G24d-3� FAGON�W100502-PLC0026


265

120

99

fagon�W100503 (recessed�mounted)

90


0

±180

-90

104.89

83.91

62.93

20.98

41.96

dimension

features •��this�wall�washer�unit�provides�the�most�pleasing�and�even�light�distribution�which�facilitates�safe�pedestrian�traffic�amongst�walkways��and�stairways�by�creating�visual�continuity�and�highlighting�the��walkways.

•��the�energy�saving�bulb�have�� significantly�reduced�the�power�consumption�of�the�luminaires�thus�reducing�the�heat�generated�and�the�associated�running�costs.



lamp typePLC�lamp

wattagemax.�26W

lamp holderG24D-3




photometric


order code


FAGON�W100503�PLC18w� PLC18w� G24d-2� FAGON�W100503-PLC0018 FAGON�W100503�PLC26w� PLC26w� G24d-3� FAGON�W100503-PLC0026


245 106

260

order code


ANGLO�P110402� Halogen�MR16�max.�50w� GU5.3� ANLGO�P110402�Halogen�/�LED� � LED�MR16�3W-6WANGLO�P110403� Halogen�MR16�max.�50w� GU5.3� ANLGO�P110403�Halogen� � /� LED � � LED�MR16�3W-6W� �


anglo P110402 & P110403 (with�glare�shield) features •��a�portable�garden�light�ground�spike�symmetrical�light�distribution�with�full�shielded�light�source�providing�glare�free.

•��extruded�aluminium�column. �Die-cast�aluminium�housing�with �high�corrosion�resistance.Stainless�steel�screws.�Durable�siliconerubber�gasket.�Clear�tempered�glass�visor.�Epoxy�Powder�paint�with�high�corrosion�resistance�and�protection.

•��this�popular�garden�spike�

spotlight�offers�a�comprehensive�range�of�lighting�options.�The�small�unobtrusive�exterior�fitting�offers�complete�vertical�and�horizontal�adjustment�and�has�been�designed�to�operate�with�GU5.3�Halogen�lamps�or�GU5.3�LED�lamps.


lamp typeMR16�Halogen�lamp�&�MR16�LED�lamp�(available�upon�request)

wattagemax.�50W

lamp holderGU5.3



maximum weight0.65�kg��P1104021.2�kg��P110403

application •�gardens•�residential�areas•�resorts•�hotel�premises•�parks•�bushes

90

note : photometric result tested based on 50w MR16 Halogen lamp

0

±180

-90

915.79

732.63

549.47

366.32

183.16

dimension photometric

100

100 136

525

100 136

P110402 P110403

P110403

P110402

bulbous

bulbous G120601 & G120606

Ø220 Ø220

Ø157

267

43

dimension

features •��this�ground�recesses�luminaires �with�symmetrical�light�distribution �is�designed�for�high�intensity��discharge�lamps.

•��the�symmetrical�reflector�is�

made�of�anodized�high�purity�aluminium.

•��the�thermal�shock�resistant�safety��stepped�glass�lens�sealed�with�weatherproof�and�durable�molded�silicone�rubber�gasket.

•��corrosion�resistant�die-cast �aluminium�optical�housing�with �weather�resistant�epoxy�powder��coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.

•��weatherproof�and�durable�

silicone�rubber�gasket�used�to�achieve�IP67�ingress�protection.


lamp typeHID�lamp


lamp holderG8.5




photometric

application •�building�facades•�parks•�bushes•�garden•�passageways•�walkways

order code

model housing colour lamp type lamp holder order code

BULBOUS�G120601�MH35w� black� tubular� G8.5� BULBOUS�G120601-M0035 BULBOUS�G120601�MH70w� black� tubular� G8.5� BULBOUS�G120601-M0070BULBOUS�G120606�MH35w� grey� tubular� G8.5� BULBOUS�G120606-M0035BULBOUS�G120606�MH70w� grey� tubular� G8.5� BULBOUS�G120606-M0070


dimension

features •��this�ground�recesses�luminaires�with�symmetrical�light�distribution�is�designed�for�high�intensity��discharge�lamps.

•��the�symmetrical�reflector�is�made�of�anodized�high�purity�aluminium.

•��the�thermal�shock�resistant�safety�stepped�glass�lens�sealed�with�weatherproof�and�durable�molded��silicone�rubber�gasket.


•�weatherproof�and�durable�silicone�� rubber�gasket�used�to�achieve�� IP67�ingress�protection.


lamp typeHID�lamp


lamp holderG8.5




photometric


order code


BULBOUS�G120602�MH35w� black� tubular� G8.5� BULBOUS�G120602-M0035 BULBOUS�G120602�MH70w� black� tubular� G8.5� BULBOUS�G120602-M0070BULBOUS�G120607�MH35w� grey� tubular� G8.5� BULBOUS�G120607-M0035 BULBOUS�G120607�MH70w� grey� tubular� G8.5� BULBOUS�G120607-M0070


Ø220 Ø220

Ø157

267

43bulbous G120602 & G120607

bulbous G120603 & G120608

dimension



•��the�thermal�shock�resistant�safety��stepped�glass�lens�sealed�with��weatherproof�and�durable�molded��silicone�rubber�gasket.

•��corrosion�resistant�die-cast�aluminium�optical�housing�with�weather�resistant�epoxy�powder�coating�and�stainless�steel�screws�to�provide�the�superior�quality�finish�for�all�weather�conditions.



lamp typeHID�lamp


lamp holderG8.5




photometric


order code




Ø220 Ø220

Ø157

267

43

bulbous G120604 & G120609

dimension



•��the�thermal�shock�resistant�safety�stepped�glass�lens�sealed�with�weatherproof�and�durable�molded�silicone�rubber�gasket.


•��weatherproof�and�durable�silicone�rubber�gasket�used�to�achieve��IP67�ingress�protection.


lamp typeHID�lamp


lamp holderG8.5




photometric


order code




230

Ø213

280

62

bulbous G120605 & G120610

90

note : photometric result tested based on 6300lm MH70w

0

±180

-90

692.86

554.29

415.72

277.14

138.57

dimension



•��the�thermal�shock�resistant�safety�stepped�glass�lens�sealed�with�weatherproof�and�durable�molded�silicone�rubber�gasket.




lamp typeHID�lamp


lamp holderG8.5




photometric


order code




230

Ø213

280

62

lamp table Lamps are subject to constant technical development and improvement. Therefore we expressly advise you to consult the latest technical

data sheets issued by the lamp manufacturers. This applies in particular to data relating to the burning position, operating current and starting

characteristics of the lamp manufacturers. We assume no liability for its completeness and validity. ]

Halogen-lamps

Wattage�(W)� Socket� Voltage�(V)� Half�Peak�� Correlated�colour�� Colour�rendering�� Luminous� Diameter� Lenght�� Av.life��

Value�(�˚�)�� temperature�(k)� index�(ra)� flux�(lm)

(mm)

(mm)

(h)

25� GY6.35� 12� �—� 3000� 100� 500� 12� 44� 4000

35� GY6.35� 12� —� 3000� 100� 900� 12� 44� 4000�

50� GY6.35� 12� —� 3000� 100� 1250� 12� 44� 4000

10� G4� 12� —� 3000� 100� 130� 9� 33� 4000�

20� G4� 12� —� 3000� 100� 320� 9� 33� 4000�

35� GY6.35� 12� —� 3000� 100� 600� 12� 44� 4000

50� GY6.35� 12� —� 3000� 100� 910� 12� 44� 4000�

75� GY6.35� 12� —� 3000� 100� 1450� 12� 44� 4000

90� GY6.35� 12� —� 3000� 100� 1800� 12� 44� 4000

150� B15d� 240� —� 2900� 100� 2500� 18� 86� 2000�

250� B15d� 240� —� 2900� 100� 4350� 18� 98� 2000

300� R7s� 240� —� 3000� 100� 5300� 12� 114� 2000

500� R7s� 240� —� 3000� 100� 9500� 12� 114� 2000�

1000� R7s� 240� —� 3000� 100� 22000� 12� 186� 2000

Halogen-lamps



(mm)

(mm)

(h)

20� GU4� 12� 10� 3200� 100� 4800� 35� 37� 4000�

20� GU4� 12� 30� 3200� 100� 800� 35� 37� 4000�

35� GU5.3� 12� 10� 3000� 100� 12500� 51� 45� 4000

35� GU5.3� 12� 24� 3000� 100� 4400� 51� 45� 4000

35� GU5.3� 12� 38� 3000� 100� 2200� 51� 45� 4000

35� GU5.3� 12� 60� 3000� 100� 1100� 51� 45� 4000�

50� GU5.3� 12� 10� 3000� 100� 15000� 51� 45� 4000

50� GU5.3� 12� 24� 3000� 100� 5700� 51� 45� 4000

50� GU5.3� 12� 38� 3000� 100� 2850� 51� 45� 4000

50� GU5.3� 12� 60� 3000� 100� 1430� 51� 45� 4000

20� BA15d� 12� 8� 3000� 100� 7700� 70� 50� 3000

20� BA15d� 12� 24� 3000� 100� 900� 70� 50� 3000�

50� BA15d� 12� 8� 3000� 100� 12500� 70� 50� 3000

50� BA15d� 12� 24� 3000� 100� 2600� 70� 50� 3000

Fluorescent - lamps



(mm)

(mm)

(h)

24� G5� —� —� �3000� 80...90� 1750� —� 549� 20000

24� G5� —� —� 4000� 80...90� 1750� —� 549� 20000�

54� G5� —� —� 3000� 80...90� 4450� —� 1149� 20000�

54� G5� —� —� 4000� 80...90� 4450� —� 1149� 20000�

Metal-halide-lamps / High pressure sodium lamps



(mm)

(mm)

(h)

20� PGJ5� —� —� 3000� 85� 1615� 17.3� 52� 4000� �

35� G8.5� —� —� 3000� 81� 3300� 14� 85� 9000�

35� G8.5� �—� —� 4200� 85� 3200� 14.5� 85� 6000�

70� G8.5� —� —� 3000� 83� 6600� 14� 85� 6000

70� G8.5� —� —� 4200� 90� 6000� 14.5� 85� 6000

35� G12� —� —� 3000� 81� 3300� 20� 100� 12000

70� G12� —� —� 3000� 81� 6600� 20� 100� 12000

70� G12� —� —� 4200� 92� 6600� 20� 100� 12000�

150� G12� —� —� 3000� 85� 14000� 20� 110� 12000

150� G12� —� —� 4200� 96� 12700� 20� 110� 9000

250� G12� —� —� 3000� 89� 23000� 20� 135� 11000

250� E40� —� —� 4500� 65� 19000� 47� 257� —�

400� E40� —� —� 4200� 65� 35000� 47� 286� —

150� RX7s-24� —� —� 3000� 88� 13250� 24� 135.4� 16000

150� RX7s-24� —� —� 4200� 96� 14200� 24� 135.4� 16000�

250� Fc2� —� —� 3000� 80� 20000� 25� 63� 6000

250� Fc2� —� —� 4200� 85� 20000� 25� 63� 6000

400� Fc2� —� —� 5600� 85� 28000� 31� 206� 6000

250� E40� —� —� 2000� —� 33000� 46� 257� —�

400� E40� —� —� 2000� —� 55000� 46� 285� —

Compact fluorescent-lamps



(mm)

(mm)

(h)

18� GX24d-2� —� —� 2700� 85� 1200� —� 116� 10000

18� GX24d-2� —� —� 3000� 85� 1200� —� 116� 10000

18� GX24d-2� —� —� 4000� 85� 1200� —� 116� 10000

26� GX24d-3� —� —� 2700� 85� 1800� —� 131� 10000

26� GX24d-3� —� —� 3000� 85� 1800� —� 131� 10000

26� GX24d-3�� —� —� 4000� 85� 1800� —� 131� 10000�

32� GX24d-3� —� —� 2700� 85� 2400� —� 147� 10000

32� GX24d-3� —� —� 3000� 85� 2400� —� 147� 10000

32� GX24d-3� —� —� 4000� 85� 2400� —� 147� 10000

42� GX24d-4� —� —� 2700� 85� 3200� —� 168� 10000

42� GX24d-4� —� —� 3000� 85� 3200� —� 168� 10000

42� GX24d-4� —� —� 4000� 85� 3200� —� 168� 10000

accreditations & certifications

CE marking for ignitor

JKR Approval

CE marking for ballast

TNB Approval

ISO9001 : 2008 BV

ISO9001 : 2008 Standard Malaysia

InternationalISO�9001:2008�Quality�Management�System�Standards�certified�by�Bureau�Veritas�Certification�(BVC)�for�design,�development�and�manufacture�of�HID�ballast,�ignitor,�industrial�lightings�and�LED�lightings,�low�voltage�transformer�and�current�transformer�since�2004.Certificate�of�Type�Test�by�ASTA�Certificate�Services�(2002)�CE�Marking�on�products�for�street�lantern,�ballast,�ignitor,�isolating�transformer�and current�transformers�(2005)

DomesticISO�9001:2008�Quality�Management�System�since�1998SIRIM�Product�Type�Test�Certification�for�ballast,�ignitor,�street�lighting�and�floodlights�(1998)�JKR�approval�of�products�for�ballast�and�ignitor�(2005),�street�lighting�(2006)�TNB�approval�on�products�for�ballast�and�ignitor�(2006)�Superbrands�status�(2006)�

CE marking foe street lantern

Sirim Certificate

For�LED�products�&�Transformer�products�information,�kindly�refer�to�www.success.com.my�or�email�to�[email protected]

success lighting catalogue_1, ‘13.09

2014 series

ind

ust

ria

l lig

hti

ng

• c

om

me

rcia

l lig

hti

ng

• i

nd

ust

ria

l lig

hti

ng

• c

om

me

rcia

l lig

hti

ng

• i

nd

ust

ria

l lig

hti

ng

• c

om

me

rcia

l lig

hti

ng

• i

nd

ust

ria

l

Success Electronics & Transformer Manufacturer Sdn Bhd (200853-k)A wholly owned subsidiary of Success Transformer Corporation Berhad.

Headquarters:No. 3,5 & 7 Jalan TSB 8, Taman Industri Sungai Buloh, 47000 Sungai Buloh, Selangor Darul Ehsan, West Malaysia.t: +603-6157 2788/ 2785/ 2787 f:+603-6157 2722 / 2723 e: [email protected] w: www.success.com.my

Australia sales office (ABN:80143481958)

Nikkon Lighting Pty. Ltd.Unit 3013 Artisan Road, Seven Hills 2147 NSW, Australiat: +61296209036, +61296245845 f: +61296209037 e: [email protected] w: www.nikkonlighting.com.au

Kenya sales office:Nikkon Success Kenya Ltd.P.O. Box 27803-00100 Nairobi, Alpha Centre, Mombasa Road, Godown No. 40, Kenyat: +25420-820015 +25457-2515275 f: + 25420-820025 e: [email protected] w: www.nsk.co.ke

Singapore sales office:Nikkon Lighting & Electrical Pte. Ltd. (201117228-C)

No. 7, Kaki Bukit Road 1, #03-15 Eunos Technolink, Singapore 415937t: +6567424377 f: +6567424366 e: [email protected]

Indonesia sales office:PT Boxon Nikkon JayaindoRuko B-6, Kav. Angkasa, Jl. Kemayoran, Mega Blok Super No.19, E Blok

t: +62-21 29070438 Line) (Hunting f: +62-21 29070439 e: [email protected] w: www.nikkonlighting.co.id

Thailand sales office:Nikkon Lighting (Thailand) Co., Ltd317 Kamolsukosol Building, Unit 8E, 8Fl, Silom Rod, Khet Bangrak, Bangkoke: [email protected] w: www.nikkonlighting.co.th

2014 series

Kota Indonesia. 10610, Pusat Jakarta Kemayoran, Bandar Baru

nikkon industrial lighting (2014 series)

Documents