olu-preg 100 gb-typeolu-preg.com/download/olu-preg-100-gb-data-sheet-en-v19-web.pdf · gb-type...
TRANSCRIPT
0 MPa
100 MPa
200 MPa
300 MPa
400 MPa 90 °
75 °
60 °
45 °
30 °
15 °
0 °
345 °
330 °
315 °
300 °
285 ° 270 °
255 °
240 °
210 °
195 °
180 °
165 °
150 °
135 °
120 °
105 °
OLU-Preg Composite GmbH · Gewerbegebiet 2 · 09557 Flöha · Germany
Phone: +49 (0) 37 26 - 792 34 90 · eMail: [email protected] · Internet: olu-preg.com
R&D Partnership
Projektnummer: KF 2498502WO1
Thin Ply PP-GF Organo SheetBidirectional Non Crimp Fabric (NCF)-ReinforcementReinforcement direction available 0°/90° or ±45°
OLU-Preg® 100 GB-Type
Unidirectional laminate layers from 0.1 mm
FVC 50%FVC 45%FVC 40%FVC 35%
OLU-Preg® 100GB-TypeTensile Strength0°/90° Reinforcement(±45° alt. available)
0 GPa
10 GPa
20 GPa 90 °
75 °
60 °
45 °
30 °
15 °
0 °
345 °
330 °
315 °
300 °
285 ° 270 °
255 °
240 °
225 °
210 °
195 °
180 °
165 °
150 °
135 °
120 °
105 °
GFR-PP, BidirectionalThermoplastics Composite
OLU-Preg® 100GB-Type
OLU-Preg Composite GmbH · eMail: [email protected] · Internet: olu-preg.com
Gewerbegebiet 2 · 09557 Flöha · Germany · Phone: +49 (0) 37 26 - 792 34 90Hofer Str. 163a · 09353 Oberlungwitz · Germany · Phone: +49 (0) 37 23 - 62 61 150
FVC 50%FVC 45%FVC 40%FVC 35%
OLU-Preg® 100GB-TypeTensile Modulus0°/90° Reinforcement(±45° alt. available)
50%1.76
1x2
2x22x2
4x24x2
6x2
6x2
45%1.67
2x22x2
4x24x2
6x26x26x2
40%1.59
1x2
2x22x2
4x2
4x2
6x2
35%1.50
1x2
2x2
6x2
FVC (+/-1.5%)Density (g/cm3)
Thickness(±0.05 mm)
0.30 mm0.40 mm0.50 mm0.60 mm0.70 mm0.80 mm0.90 mm1.00 mm1.10 mm1.20 mm1.30 mm1.40 mm1.50 mm1.60 mm1.70 mm1.80 mm1.90 mm2.00 mm2.10 mm2.20 mm2.30 mm>2.4 mm
Number of plies
2(non balanced)
4(balanced)
8(balanced)
12(balanced)
OLU-Preg® 100 GB
12+
Non-standard variation of thicknesses and FVC also available
Release date 09/2017. This data sheet supersedes all previous editions, which thereby become invalid. The data listed refers to a specific composition only and were tested in accordance with DIN EN ISO. The mechanical characteristic values depend on many factors of material used and processing parameters. Any use of this information must be clarified with OLU-Preg Composite GmbH. OLU-Preg Composite GmbH does not assume any responsibility for any use of this information not clarified with OLU-Preg Composite GmbH.