operating room: terminal cleaning procedure - … terminal cleaning... · operating room: terminal...

1
www.sealedair.com © 2014 Sealed Air Corporation. All Rights Reserved. 23011-CHT90848 (14/140) If you have any question, please contact your supervisor. NOTE: All sharps and glass should be handled with extreme caution for your protection 6 Operating room table; break down and clean all components; clean both sides of the mattress and the table base 10 IV poles 8 Mayo stands 9 Ring stands 7 Flat surface tables 18 Step stools 16 Supply cabinets 17 Overhead monitors 13 Slider board 12 Chairs 11 Waste and linen receptacles 14 Boom and arms 15 Omnicell 1 Gather cleaning cloth moistened with disinfectant; As the cloth becomes soiled, exchange it for a new cloth 5 Overhead surgical lights and arms 4 Telephones, key pads and receivers 3 Light switches 2 Doors and door handles 3 Inspect Room - identify and report any room issues 4 Gather and remove all used and soiled linens Gather and remove all trash and infectious waste 5 1 Gather supplies 2 Conduct hand hygiene, put on PPE Getting Started Clean and Disinfect Operating Room Surfaces and Equipment Operating Room: Terminal Cleaning Procedure 6 Remove suction containers for cleaning Place wet floor sign at room entrance Check sharps containers; if 2/3 full; have container changed Spot clean any visible soil from low touch surfaces 9 7 8 1 Reline waste and linen receptacles 5 Rearrange equipment as needed 4 Scrub floors 3 Make OR table 2 Replace suction canisters Finishing the Room 6 Inspect work 8 Transport waste and linen to collection area 7 Remove all cleaning supplies and wet floor signs from room Remove PPE/ Conduct hand hygiene 9 21 Ceiling and tracks 22 Air intake grills, ducts and filter covers 19 Kick buckets 20 Soiled Walls

Upload: dangkhuong

Post on 22-Jun-2018

236 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Operating Room: Terminal Cleaning Procedure - … Terminal Cleaning... · Operating Room: Terminal Cleaning Procedure 6 Remove suction containers for cleaning Place wet floor sign

www.sealedair.com © 2014 Sealed Air Corporation. All Rights Reserved. 23011-CHT90848 (14/140)

If you have any question, please contact your supervisor.

NOTE: All sharps and glass should be handled with extreme caution for your protection

6 Operating room table; break down and clean all components; clean both sides of the mattress and the table base

10 IV poles8 Mayo stands 9 Ring stands7 Flat surface tables

18 Step stools16 Supply cabinets 17 Overhead monitors

13 Slider board12 Chairs11 Waste and linen receptacles

14 Boom and arms 15 Omnicell

1 Gather cleaning cloth moistened with disinfectant; As the cloth becomes soiled, exchange it for a new cloth

5 Overhead surgical lights and arms

4 Telephones, key pads and receivers

3 Light switches2 Doors and door handles

3 Inspect Room - identify and report any room issues

4 Gather and remove all used and soiled linens

Gather and remove all trash and infectious waste

51 Gather supplies 2 Conduct hand hygiene, put on PPE

Getting Started

Clean and Disinfect Operating Room Surfaces and Equipment

Operating Room: Terminal Cleaning Procedure

6 Remove suction containers for cleaning

Place wet floor sign at room entrance

Check sharps containers; if 2/3 full; have container changed

Spot clean any visible soil from low touch surfaces

97 8

1 Reline waste and linen receptacles

5 Rearrange equipment as needed

4 Scrub floors3 Make OR table2 Replace suction canisters

Finishing the Room

6 Inspect work 8 Transport waste and linen to collection area

7 Remove all cleaning supplies and wet floor signs from room

Remove PPE/Conduct hand hygiene

9

21 Ceiling and tracks 22 Air intake grills, ducts and filter covers

19 Kick buckets 20 Soiled Walls