owner's manual€¦ · button until av3 svhs appears on the screen. note: the s-video input...
TRANSCRIPT
PALSONIC CORPORATION PTY LTD1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIATEL: (02) 9313 7111FAX: (02) 9313 7555www.palsonic.com.au
PALSONIC CUSTOMER SERVICETELEPHONE
AUSTRALIA: 1300 657 888
76CM CORDLESS REMOTE COLOUR TELEVISIONMODEL: 7600WS
OWNER'S MANUAL
Type TestedElectrical
SafetyAS/NZS 3250 Lic 4166
Standards AustraliaAPP No: N15900
Congratulations on your purchase of this Palsonic colour television.We recommend that you thoroughly read this manual before use to fully enjoy the many functions andexcellent effects of this equipment.Retain this manual in an easily accessible location for future reference.* Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
ContentsFeatures ............................................Safety precautions ...........................Identification of Controls ................Front ...................................................Back ...................................................Remote Controller ..............................Antenna Connection ........................Installation ........................................External equipmentconnections ......................................Using the side AUDIO/VIDEO jacks ...Using the rear AUDIO/VIDEO input jacks .....Using the rear DVD input jacks ..........Using the rear AV outputs...................Power on/off .....................................Turning on ..........................................Turning off ..........................................Selecting Input Signal .....................Watching AV program ........................Switching from AV to TV ....................Tuning in ...........................................Automatic tuning ................................Manual Tuning ...................................Fine tuning .........................................Setting colour system .........................Setting sound system .........................Channel delete ..................................Program delete ...................................
18181920202021212121222223232324242525252525262728293032
Program sort ....................................Program name .................................Channel Selection .........................Picture adjustment ........................To select the picture mode ..............Picture adjustment ...........................Sound Controls ..............................Adjusting volume .............................Adjusting sound ...............................Sound mode selection .....................To select stereo/bilingual mode .......To enter into earphone state ............Timer Setting .................................Setting Clock ....................................Setting OFF time ..............................Setting ON timer ..............................Setting Timer set .............................Special functions ...........................To select OSD language ..................Setting blue back .............................Rotate function ................................Screen aspect selection ...................Child lock setting ...........................Hotel Lock Setting .........................Game playing .................................Teletext ...........................................Troubleshooting Guide .................Specifications ................................
12444567
8899
101111111212121313141516161717
Contents
1
Hyperband
Automatic channel preset
Full function remote control
AV input/output (RCA) jacks
DVD input (RCA) jacks
Selectable picture and selectable sound
NICAM and German stereo/bilingual broadcasts (option)
Teletext
ON Timer, OFF Timer
Real Clock (with teletext signal)
Program sort and program name
Child lock (option)
Hotel lock (option)
Digital comb-filter
SMV (scan velocity modulation) (option)
Black stretch, CTI (Colour Transient Improver) function
Game
AVL (automatic volume level) (option)
Bass/Treble/Balance control
MSS (Micronas surround sound) (option)
DBE (Dynamic Bass Enhanced) (option)
Picture rotate (option)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Main features
2
Note: This TV set can operate on an AC power of 240V, 50Hz. You must not use a power supplyof any other type.
When any unusual situation occurs, turn off thepower supply at once and remove the plug from thewall outlet. Contact a qualified service department inyour local area.
When cleaning dust off the picture tube disconnectthe power first. You can wipe lightly with a piece ofdry, clean and soft cloth.
Avoid exposing the set to direct sunlight and othersources of heat to prevent damage to the cabinetand components.
Do not expose the TV set to rain or excessivemoisture. Avoid using the set in very warm ordamp places and never use it in a bathroom.
High voltage exists in this TV set. Do not remove thecover.
Safety precautions
3
Don't overload wall outlets; extension cords, orintegral convenience receptacles as this can resultin a risk of fire or electric shock.
Do not cover the ventilating hole in the cabinetKeep a space of more than 10cm from the walls to theTV set to ensure adequate ventilation.
If the power cord or the plug is damaged contact aqualified service department for service.
When the TV set is to be left unattended for a longperiod of time, turn off the power supply and removethe plug from the wall outlet.
Don't try to push anything into the cabinet or placeany vessel with water on the TV set.
Safety precautions
Back
Identification of Controls
4
Front/Side
POWER SWITCHREMOTE SENSORINDICATOR
AV2 input(VIDEO, AUDIO (L/MONO, R))
AV1 input(VIDEO, AUDIO (L/MONO, R))
AV1 output(VIDEO, AUDIO (L, R))
Antenna input
DVD input(VIDEO, Y,Cb,Cr,AUDIO: L/MONO, R)
Earphone jack
AV3 input/S-VHS input(S-VIDEO, VIDEO,AUDIO (L/MONO, R))
AV(3)/SVHS
L/MONO
VIDEO
S-VIDEO
R
Volume downVolume up
Channel down
MenuAV/TVChannel up
VOL- VOL+ CH- CH+ AV/TV MENU
YELLOW (teletext)
Remote controller
RED (teletext) Game playing
Stereo/Mono/Bilingual select
Real clock (teletext) Power on/standby
Reveal/conceal (teletext)
Enter into Earphone state
Direct channel select
Previous program
Return to TV mode/Clear the menu
Channel up/downMenu item select
GREEN (teletext),Sound mode select
Contrast control (teletext)
Picture mode select
Brightness control (teletext)
Retain on-screen display
Mix (teletext)
Teletext/TVSound mute
MENU
Hold (teletext)
Size (teletext)
Index (teletext)
Digit select
Volume up/downMenu item adjust
CYAN (teletext), Child lock
?
+
-
+-
+
SOUND
S.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
TV/VIDEO input select
P.M
5
Identification of Controls
Screen Aspect select
Notes:
6
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must beused. The exact type and position of the aerial will depend upon your particular area.
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise whichmay occur due to radio wave conditions.The aerial cable should not be bundled with the power cord and the like.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection onthe picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortableviewing.
Antenna connection
RF
Install two "AAA" batteriesmatching the +/- polaritiesof the battery to the +/-marks inside the batterycompartment.
7
Installing batteries
Do not try to recharge batteries that are notintended to be recharged.Use only the size and type of batteries specified.Do not mix different types of batteries togetheror old batteries with fresh ones.When the remote control will not be used for along period of time or when the batteries areworn out, remove the batteries.Do not throw the batteries into a fire. Dispose ofused batteries in the specified manner.Do not drop, dampen or disassemble the remotecontrol.
Effective range of the Remote
When there is an obstacle between the TVand the transmitter, the transmitter may notoperate.When direct sunlight, and incandescent lamp,fluorescent lamp or any other strong lightshines on the REMOTE SENSOR of the TVthe remote operation may be unstable.
Open the battery cover.
Replace the battery cover.
Installation
5m
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Notes:
Notes:
Using the side AUDIO/VIDEO Jacks
8
The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as acamcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio Input jacks andthe Video Input jacks.
The figure below shows how to connect the AV3 input jacks to video equipment.
To access the unit connectedto these jacks, press 0/AVbutton until AV3 appears onthe screen.
The figure below shows how to connect the SVHS input to video equipment.
To access the unit connectedto these jacks, press 0/AVbutton until AV3 SVHSappears on the screen.
Note: The S-VIDEO input terminal has priority over AV3 VIDEO terminal. To use equipment connectedto AV3 VIDEO terminal, disconnect any plug from the S-VIDEO terminal.
White (audio L/MONO)
Red (audio R)W
R
AV(3)/SVHS
L/MONO
VIDEO
S-VIDEO
R
Video game
Yellow (video)
White (audio L/MONO)
Red (audio R)
Y
W
R
TV SET SIDE
To videooutput
To audiooutputs
Signal
SignalTo S-VIDEOoutput
To audiooutputs
Camcorder, etc.
TV SET SIDE
External equipment connections
AV(3)/SVHS
L/MONO
VIDEO
S-VIDEO
R
WWYY
RR
WWYY RR
WWRR
WW RR
Using the rear AUDIO/VIDEO input Jacks
9
You can connect video equipment such as a VTR and video camera to this TV and enjoy the high qualitypictures and sound.
To access the unit to AV1 or AV2 inputs, press 0/AV button until AV1 or AV2 appears on the screen
External equipment connections
R
yellow (video)white (audio L/MONO)red (audio R)
VIDEO EQUIPMENT VIDEO EQUIPMENT
TV SET REARW YRW YR
W
Y
R
W
Y
R
To videooutputsTo audio
outputs
To videooutputsTo audio
outputs
W
Y
Using the rear DVD input Jacks
The Y,Cb,Cr outputs on your DVD player are sometimes labelled Y,U,V, If so, connect the cables tolike colours.
You can connect DVD player to DVD inputs on the TV rear and enjoy the high quality picture and sound.
To access the unit connected to DVD inputs, press 0/AV button until DVD appears on the screen.
AUDIOOUTPUT
Red (audio R, C )White (audio L/MONO)Green (Y)Blue (C )Direction of the signal
DVD Player,Laser Disk Player etc.
COMPONENTVIDEO OUTPUT
R WRGB
W
R
G
B
R
B
WR RG B
SignalsY Cb Cr
Using the AV Outputs
10
External equipment connections
You can connect a stereo system to the AV output jacks on the TV set rear to enjoy a high-quality sound fromthe stereo system, or you can connect the AV output jacks to the VTR to record the program you like.
To external input
Audio Amplifier
Yellow (video)white (audio L)red (audio R)
Signal
Another VTR forrecording
To video input
TV SET REAR
To audio inputs
Connect the audio outputs to audio amplifieras the figure above.
Setamplifier volume to minimum.
Select the desired TV program that youwould like to amplify.
Adjust amplifier to a proper volume.
Connecting Audio Amplifier
1
23
4
Connect the AV outputs to VTR as the figureabove.
Select the desired TV program that youwould like to record.
Press "RECORD" button of the VTR to recordTV program.
Recording TV program
1
2
3
VHS
W
R
W
Y
R
W
Y
R
W R
Signal
W
Y
R
Turning on
1
11
1
2
0-9 digitbuttons
2
Press the Power Switch on the TV set.Now the standby indicator lights up, the TV set is inSTANDBY mode. Now please follow step 2.
In STANDBY mode, press the button or 0-9digit button on the remote controller and theTV set is turned on.In STANDBY mode, you can also press Channelup/down or AV/TV button on the set to turn on the set.
Press the Power Switch on the TV set if youwant to cut off the power completely.
If you want to turn off the TV set temporarily,press the button.
Turning off
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
(On/standby)
Power on/off
Watching AV program
12
1
This TV set provides AV and DVD input terminals for yourconvenient connection to VCR, DVD or other videoequipment.
To watch video program from AV inputs orDVD inputs, Press 0/AV button repeatedly untilyou see the appropriate input indicator on thescreen.
Notes: When AV3 S-VIDEO is used, the OSD is AV3 SVHS.
When the TV set is in AV or DVD mode, there are three waysfor you to switch back to TV mode as follows.
Press 0/AV button repeatedly until the TVprogram appears.
Press the OK button to switch back to TVmode.
Press CH+/- button to switch back to TV mode.3
2
1
Switching from AV to TV
AV1 AV2 AV3 2Auto B/G
MONO
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
AV button(TV/VIDEOinput select)
OK button
CH+/- button
DVD
Selecting input signal
Automatic Tuning
3
13
1
2
Program 1 48 MHz >>
Automatic tuning
* To exit the menu, press OK button.
Press MENU repeatedly todisplay Program menu.
Press CH+ or CH- to selectAutomatic tuning.
Press VOL+ to start automatictuning. All active channels willbe preset and stored intomemory automatically.
After automatic tuning, the set will return to the firstchannel program.During automatic tuning, pressing OK button will stop theprocess.
Note:Before Automatic tuning, we recommend you to set aproper Sound System according to your local area. (seepage 16)
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Tuning in
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Manual tuning
3
14
1
2
4
5
* To exit the menu, press OK button.
If automatic tuning can not preset the desired channels, or youwant to preset the desired channels one by one with thepreferred channel numbers, please make use of Manual tuning.
Repeatedly press MENU toenter into Program menu.
Press CH+ or CH- to selectManual tuning.
Press VOL+/- to enter intoManual tuning sub-menu.
In Manual tuning sub-menu,press CH+/- to selectProgram, use VOL+/- toselect a number, or you candirectly input the number bydigit buttons.
Press CH+/- to selectManual search, pressVOL+/- to start searching.The VOL- searches towardslower frequency; the VOL+towards higher frequency.When a channel is located,the searching stops and thechannel is stored in thespecified position number.
Repeat the above steps if you want to store anotherprogram in other position number.
Program
Manual searchFine Tune
Manual tuning
+-
P+
P-
Program
Manual searchFine Tune
Manual tuning
+-
P+
P-
148 MHz
Program
Manual searchFine Tune
Manual tuning
+-
P+
P-
148 MHz
>>
MENU
CH+/-(menu itemselect)
VOL+/- (menu item adjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
iAutomatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Tuning in
Fine tuning
Fine tuning is not necessary under normal conditions.However, in area of inferior broadcast conditions whereadjustment is necessary for a better picture and sound,use Fine tuning.
Select a channel you want tofine-tune (for example:channel 3).
Press MENU repeatedly todisplay Program menu.
3 Press CH+/- to selectManual tuning, pressVOL+/- to enter into Manualtuning sub-menu.
Press CH+/- to select Finetune.
Press VOL+/- to begin finetuning until the best possiblepicture and sound areobtained.
15
1
2
4
5
* To exit the menu, press OK button.
Digit buttons
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Tuning in
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Program
Manual searchFine Tune
Manual tuning
+-
P+
P-
348 MHz
LanguageBlue backRotateChild lockColor systemSound system
Special functions
+-
P+
P-
EnglishOn50Off
AutoB/G
Setting Sound System
Setting Colour System
3
16
1
2
1
2
* To exit the menu, press OK button.
If some channel's colour is abnormal, it may be that thesetting of the colour system is wrong, please do thefollowing steps to set a proper colour system.
Press MENU repeatedly todisplay Special functionsmenu.
Press CH+/- to select Colorsystem.
Press VOL+/- to select aproper colour system.
If some channel's sound is abnormal, it may be that thesetting of the sound system is wrong, please do thefollowing steps to set a proper sound system.
Enter into Specialfunctions menu.
Press CH+/- to selectSound system.
Some models are only withone sound system and in thiscase the Sound Systemdoes not need to be adjusted.
3 Press VOL+/- to select aproper sound system.
LanguageBlue backRotateChild lockColor systemSound system
Special functions
+-
P+
P-
EnglishOn50Off
AutoB/G
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Tuning in
Program delete
3
17
1
2
5
6
* To exit the menu, press OK button.
After presetting the channels, you may delete unnecessaryprograms so that only the programs you want to watch areselected.
Use digit buttons or channelup/down button to select aprogram you want to delete(for example: program 3).
Press MENU repeatedly todisplay Program menu.
Press CH+/- to selectProgram 003 item.
Press the RED button to delete the program.
Please wait for some time until the "Program 003"menu item does not glitter (for the system needs time todelete program).
Now channel 3's program is deleted, and channel 4'sprogram move to channel 3, and so on.
If you want to delete otherprograms, highlight Program003 item and press VOL+button and a small blockappears near 003.
Now press CH+/- button toselect the program numberyou want to delete, then pressRED button to delete.
4
Digit buttons
MENU
CH+/-(menu itemselect)
VOL+/- (menuitem adjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
RED button
S.M (confirm button)
Channel edit
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
Program name
Program sort
18
* To exit the menu, press OK button.
3
1
2
If required, you can give a name to the programs.
In Program menu, highlight Program 003, press VOL+button and a small block appears near 003.Now press CH+/- to select program to name or rename.(Or you can directly select the program (for example:program 3) you want to name using the channel selectbuttons, then enter into the Program menu and highlightProgram 003, then press VOL+).
Press VOL+ again and an arrowhead appears nearthe small block.
Use VOL+/- to movearound the name displayarea (5 characters) andCH+/- to select the character.
When the name has beenentered, use VOL- to exit.The name is stored.
Repeat steps above for each program you wishto name
4
1
23
You can sort programs in your favourite order.
Select the program you want to move using channelselect buttons (for example: program 3).
Press MENU repeatedly until Program menu appears.
Press CH+/- to selectProgram 003.
Press VOL-, 003 changesto <003.
4Digit buttons
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Channel edit
Press CH+/- to select thenew number, for example001.
5
6 To exit the menu, press OKbutton.Repeat the above steps tosort the programs in yourfavourite order.
5
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
<
Automatic tuningManual tuning
Program
Program
+-
P+
P-
001002003004005
><
P+
P-
Automatic tuningManual tuning
Program
Program
+-
001002003004005
TF1FR2CCT
Notes:Use on-screen display button ( ) to knowthe current channel number
+
3
19
1
2
Use Direct Channel Select buttons To select one-digit channel:Press --/--- button to display "-", then input the number.
To select two-digit channel:Press --/--- button to display "--", then input the number.
Press"--/---" button
Press0-9 button
Press0-9 button
To select three-digit channel:
Press --/--- button to display "---", then input the number.
* In this model the maximum channel number is 255.
Use CH+ or CH- button Press CH+ button, the channel number increases;Press CH- button, the channel number decreases.
Use previous program button ( ) Press this button to switch between the current programand the previous one.
Press this button to display thecurrent TV state. If in TV programviewing, then it will display thecurrent channel number, coloursystem, sound system and soundmode. Press it again to cancel thedisplay.
12Auto B/GMONO
Press"--/---" button Press 0-9 button- 5
-- 5- 56
--- 1-- 15- 156
Press0-9 button
Press0-9 button
Press0-2 button
Press"--/---" button
Digitbuttons
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
(Previousprogram)
CH+/-(Channelup/down)
Retainon-screendisplay)
Channel selection
(Digit select)
Picture qualityDisplay normal pictures
Display more brightness and contrast picturesDisplay mild pictures
The picture quality you set
To select the picture mode
3
20
1
2
* To exit the menu, press OK button.
You can select the picture qualityinstantly among three presetmodes and one user-set mode.
Press the P.M button to select thedesired picture quality. Standard,Dynamic, Mild and Favourite (user-set) can be selected cyclically.
Press MENU to displayPicture menu.
Press VOL+/- to adjust.
Notes: Tint is only for NTSC system.
Turning on SVM will greatly improve picture's sharpness.* SVM is an optional function.
Picture mode Favourite
Picture mode Mild
Picture mode Dynamic
Picture mode Standard
ModeStandardDynamic
MildFavourite
Picture adjustment
Press CH+ or CH- to selectdesired adjusting item.
ItemContrast
BrightnessColour
SharpnessTint*SVM
VOL-weakerdarkerpalersofter
purplish
VOL+strongerlighterdeepersharpergreenish
High/Mid/Low/Off
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
P.M(Picture mode select) Contrast
BrightnessColourSharpnessTintSVM On
Picture
+-
P+
P-
Picture adjustment
Press VOL+/- to adjust thelevel.
Sound qualitylike a movie theatre filled with a dynamic soundlike a music hall filled with a rich warm sound.
Suitable for listening to news/dialoguethe sound quality you set
Sound mode Speech
Sound mode Favourite
Sound mode selection
Adjusting volume
3
21
1
2
21
You can select the sound quality instantly amongthree preset modes and one user-set mode.
Press the S.M button to selectthe desired sound quality. Movie,Music, Speech and Favourite(user-set) can be selectedcyclically.
ModeMovieMusic
SpeechFavourite
Use VOL+ or VOL- button.Press VOL+ button, the volume increases;Press VOL- button, the volume decreases.
Use MUTE button.If you want to mute the sound,press button on the remote.
To resume the sound, pressthis button again.
Press MENU repeatedly to display Sound menu.
Press CH+ or CH- to selectdesired adjusting item.
The adjusted level is stored in the Favourite position.
Note: DBE/MSS function are optional function.
Adjusting sound
MSS (Micronassurround sound)
DBE (Dynamicbass enhanced)
ItemVolume
BassTreble
VOL+strongerstrongerstronger
decrease theleft channel
VOL-weakerweakerweaker
decrease theright channel
ON/OFF
ON/OFF
Balance
Sound mode Movie
Sound mode Music
Volume
XDigit buttons
MENU
CH+/-(menu itemselect)
VOL+/- (volume adjustmenu item adjust)
OK(exit the menu)
S.M(sound mode select)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
(Sound mute)
VolumeBassTrebleBalance
DBE OffMSS Off
Sound
+-
P+
P-
Sound controls
Stereo programs
2
22
1
2
* To exit the menu, press OK button.
1
The unit receives both stereo and bilingual broadcasts transmitted in either the NICAM or Germanstereo/bilingual broadcast system.
When a stereo program isreceived, STEREO appears.
Press the SOUND button to selectthe stereo/monaural mode.
When a bilingual program isreceived, DUAL appears.
Press SOUND button to select the sound to be heard,Dual I and Dual II appear cyclically on the screen.As for NICAM-dual program, Mono and Dual I and Dual IIappear cyclically on the screen.
Notes:
As for FM Germany Dual program, press SOUND button,the sound mode will switch between Dual I and Dual II.
Press button to enter intoearphone state, in this state, soundis outputted through earphones andspeakers’ sound is muted. Pressthe button again to restore.
In earphone state, the soundmenu is shown on the right figure:
In the menu, use CH+/- to selectitem, VOL+/- to adjust the level.Or you can directly press VOL+/-button to adjust earphonevolume.
Bilingual programs
To enter into earphone state
22Auto B/G
Dual I
12Auto B/G
Mono
12Auto B/GStereo
Menu
CH+/-(menu itemselect)
VOL+/- (volume adjustmenu item adjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Enter intoearphone state
SOUND(MonauralStereobilingual select)
Sound
+-
P+
P-
VolumeBassTrebleBalance
Sound controls
Setting clock
3
23
1
2
* To exit the menu, press OK button.
2
Use digit buttons to input thecurrent time for the set. Ifwrong in setting the time,press RED button to canceland input again.
Press MENU button repeatedly to display Timer menu.
Press CH+/- to select Clock.
Notes:Before setting the timer, please first set the CLOCK item.Press the main power switch to turn off the set, the clock willbe cancelled. You need to reset it if you want to use the timerfunction.
With the OFF timer, the TV will automatically switch tostandby mode at a preset time.
In Timer menu, press CH-to select Timer off.
Use Digit Buttons to set theOFF time. In wrong ininputting, press RED buttonto cancel and input again.
At the preset time, the TV will go into standby modeautomatically.
Once the OFF timer has been fulfilled, next when youwant to use it, you should reset it again.
1
To turn off TV automatically (OFF timer)
ClockTimer offTimer onTimer setProg no
Timer
+-
P+
P- x
10:01--:----:----:--3
ClockTimer offTimer onTimer setProg no
Timer
+-
P+
P- x
10:0223:00--:----:--3
Digit buttons
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
RED button
Timer setting
To turn on the TV automatically (ON timer)
3
24
12
* To exit the menu, press OK button.
4
With the ON timer, the TV will automatically turn on to apreset channel at a preset time.
In Timer menu, press CH- toselect Timer on.
Use Digit Buttons to set ONtime. If wrong in inputting,press RED button to canceland input again.
Press CH- to select Prg no.,use VOL+/- to set the ONprogram, or you can directlyinput the number by digitbuttons.
Press STANDBY ( ) button to switch the TV to standbymode.At the preset time, the TV will turn on to the presetprogram automatically.
Once the ON timer has been fulfilled, next when you wantto use it again, you should reset it.
In Timer menu, press CH+/-to select Timer set.
Use Digit buttons to set thetime. If wrong in inputting,press RED button to canceland input again.
Press CH- to select Prg no.,use VOL+/- to set a programnumber, or directly input thenumber by digit buttons.At the preset time, the TV willautomatically switch to thepreset program.
Note:When you turn off the TV by main power switch, allfunctions in Timer menu will be cancelled.
3
1
2
To switch the TV to a program at a preset time
ClockTimer offTimer onTimer setProg no
Timer
+-
P+
P- x
10:0212:0014:05--:--5
ClockTimer offTimer onTimer setProg no
Timer
+-
P+
P- x
10:0523:00--:--
18:002
ClockTimer offTimer onTimer setProg no
Timer
+-
P+
P- x
10:0623:00--:--
18:0014
Digit buttons
MENU
CH+/-(menu itemselect)
VOL+/- menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
RED button
(On/standby)
Timer setting
To select OSD language
3
25
12
* To exit the menu, press OK button.
There are multi OSD languages in this TV set provided foryou to select (OSD: on-screen display):
Press MENU repeatedly to display Special functionsmenu.
Now the first menu item ishighlighted and indicates thecurrent selected OSDlanguage. (if in English it willdisplay ENGLISH).
Press VOL+/- to select a proper OSD language.
Enter into Special functions menu
Press CH+/- to select Blueback.
Press VOL+/- to turn on/offblue back.
If the Blue back is turned on, the TV will appear ablue back on the screen when there is no input signal.
When you switch on your TV there may be a slight tilt of thepicture to the left or right. This is due to the earth's magneticfield or position of your TV. To rectify, you can do thefollowing:
Enter into Special functions menu.
Press CH+/- to selectRotate.
Press VOL+/- to rotate thepicture until you are satisfied.
3
12
3
12
Rotate function (option)*
Setting blue back
LanguageBlue backRotateChild lockColor systemSound system
Special functions
+-
P+
P-
EnglishOn50Off
AutoB/G
LanguageBlue backRotateChild lockColor systemSound system
Special functions
+-
P+
P-
EnglishOn50Off
AutoB/G
LanguageBlue backRotateChild lockColor systemSound system
Special functions
+-
P+
P-
EnglishOn30Off
AutoB/G
Screen aspect selection
Special functions
MENU
CH+/-(menu itemselect)
VOL+/- (menu itemadjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Screen aspect select
Without teletext working , press - button to select picturesize (ratio) between 4:3 and 16:9 according to yourpreference.
Note: Rotation function is an optional function.It is only available in certain versions.
Child lock setting
3
26
1
2
4
* Child lock is an optional function.
Making use of child lock function, you can lock all theprograms to prevent children from viewing them.
Press LOCK button on theremote control, the Lockmenu bar appears.
(or press MENU repeatedlyto display Special functionsmenu. Press CH+/- to selectChild lock item, then pressVOL+/- to enter.)
Input the correct password. (6-digit, the preset password is123456). After inputting, the screen displays "Lock: On".
After one or more seconds the screen will display"New______", now press OK button (or wait for sometime until "New ______" disappear) and the child lock function is active now, the screen only displays blue backwith Lock menu bar.
To unlock, input the correct password to set the Childlock to OFF.
Note: the preset password can be changed, the steps areshown below:After you set the lock to On (or Off), the screen will display"New ______", input the new password, and confirmagain. Now the password has been changed. But makesure to remember the new password.
In child lock OFF mode, if you press LOCK buttonunintentionally, you can press OK button to exit.
In child lock ON mode, buttons on the TV set can not act.Also most buttons on the remote control can not act.
To avoid forgetting the password, write it down here:------
Lock *****-
Lock ------
Lock Off
Lock ------
Lock *****-
Lock On
New ------
New------?Digit buttons
MENU
CH+/-(menu itemselect)
VOL+/- (menu item adjust)
OK(exit the menu)
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Enter intochild lock setting
Child lock setting
Hotel ------
Hotel *****-
Hotel Off
New ------
New------?
Hotel lock setting
3
27
1
2
1
Making use of hotel lock function, you can limit somefunctions so that other user can not change your settings.This function is especially useful in hotel.
Press button on theremote control, the screenwill display "Hotel ------".
Input the 6-digit password(the preset password is123465), the screen willdisplay "Hotel Off (or On)".
Press VOL+/- to select ON.
Now Hotel Lock function is active now. Only some buttons(for example, channel select buttons, volume controlbuttons, AV button, etc.) can act and the volume is limited.In Hotel ON mode, the maximum volume level is the levelyou set just before you enter the Hotel ON mode. If youwant to change the volume limitation, set the Hotel to OFFand then adjust the volume, then enter into ON modeagain.
To exit the hotel lock, set Hotel to OFF.
To clear the On-screen display, you can press OK button.
To change Hotel Lock password
The preset password for hotel lock can be changed, thesteps are shown below:
After setting Hotel to OFF mode, pressMENU button, the screen displays"New ------"
Input the new password and confirmagain.Now the password has been changed.
To avoid forgetting the password, write it down here:------
2
+
* Hotel lock is an optional function.
Hotel ------
Hotel *****-
Hotel Off
Hotel OnDigit buttons
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
MENU button
Clear the OSD
VOL+/- buttons
Enter intohotel lock setting
Hotel lock setting
To play game (card game)
3
28
12
Press GAME button to enter.
Press MENU button to select level.There are five levels for you to select. The higher thelevel, the more difficulty the playing.
Press CH+/CH-/VOL+/VOL- button to select card, pressOK button the card will be turned over. If the second cardyou turned over is different with the first card, it will coveragain unless the same two cards are selected. Only youturn over all the cards, you win the game.
Press GAME button to exit.4
The levelyou select Game
Best:190Time:120
P
The best record
The card you turn over
The time you play
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
Enter/exitgame playing
Gamecontrol buttons
Game playing
Teletext
29
Teletext is an optional function, therefore only a set with the teletext system can receive the teletext broadcast.
Switching Teletext on/offPress button once to switch on teletext.Press button twice both teletext and TV program are displayed.Press button third time to switch off the teletext.
Description of TeletextTeletext is a free service broadcast by most TV stations whichgives up-to-the-minute information on news, weather,television programs, share prices and many other topics.The thing to remember about Teletext is that it is slow. It is thenature of the system itself, where a large amount of informationis sent using a small fraction of the TV signal. If you get yourselfinto trouble, read the following instruction carefully. It may haveyour answer.Teletext is controlled through the remote controller.
Button introduction1 (TEXT)Press button to bring the set from TV mode to Teletext mode.Press it at the third time to resume TV mode.2. (MIX)Press the button, the text will be superimposed on a TV picture.Press again to restore text.3. (INDEX)In teletext mode press the button, the index page will appear.4. (REVEAL)Some pages have sections that are concealed such as theanswers to riddles or puzzles. To see the concealed part, pressthe button. Press it again to conceal.5. (HOLD)To hold the current teletext page, press the button. To releasethe page press the button again.
6. (SIZE)Press the button to expand the top half of the display. Press itagain to expand the bottom half of the display. Press it oncemore to resume normal size.
7. (REAL CLOCK)Press the button to display the real time on the screen whileviewing TV program which carries a teletext broadcasting.Press again to turn off the time display.8. RED/GREEN/YELLOW/CYAN buttons(corresponds to GAMES/S.M/P.M/LOCK button)These four colour-coded buttons control a memory that allowsinstant access to the displayed corresponding page number.9. buttonsPress the buttons to adjust Teletext brightness.10. buttons Press the buttons to adjust Teletext contrast.
?
i
+/-
+/-
?
+
-
+-
+
SOUND
S.M P.M
GAME LOCK
--/---
OK
MENU
2
5 6
3
987
41
0/AV
+-VOL
+
VOLCH
CH-
i
?
i
Teletextbrightness control
Text pageup/down
Teletextcontrast control
Colouredtext selectbuttonsREDGREENYELLOWCYAN
Direct pageselect
(Text/TVselect)
(Mix/Text)
(Reveal/Conceal)
(Real clock) (Hold)
(Size)
(Index)
Only some buttons havefunction while others cannot act, and the volume islimited.
30
Before calling service personnel, please check the following chart for a possible cause to the trouble you areexperiencing.
Power is not turned on
Poor colour poor tint
Be sure the power cord is plugged in.
Contrast, colour tint are not correctly adjusted
Spots appear on the screen Possible interferences of automobiles, motorcycle,trolley bus, neon lamps, etc.
Stripes appear on the screen
Double images or "ghosts"
Possible interference of electronic interferencefrom another TV set, a computer, an electronicsgame machine, a broadcast station, etc.
This may be caused by reflections from nearbymountains or buildings.Check the antenna direction.
Snowy picture It is possible that the aerial "lead-in" is damaged orcomes off.Check the antenna direction.
The screen only displaysblue back. Buttons on theTV set can not act.
The set may be in child lock ON mode. Use LOCKbutton and password to unlock it. If you forget thepassword, you can contact our company or thedealer.
The set may be in hotel lock ON mode. Set hotellock to OFF. If you forget the password, you cancontact our company or the dealer.
TV cabinet creaksEven if the picture or the sound is normal, changesin the room temperature sometimes make the TVcabinet expand or contract, making a noise. Thisdoes not indicate a malfunction.
Remote controller doesnot work
The batteries may be worn out.The batteries may be installed with their polarityreversed.
Unevenness in colour insome parts of the screen
When the set is switched on, do not shift or movethe set around. Sometimes it may develop anunevenness in colour in some parts of the screen.This can be eliminated by switching off the set withthe POWER switch and wait for 30 minutes beforeswitching on again.
Symptoms Check the following items
Normal picture but nosound
Check volume levels.Make sure the TV is not mutedMake sure the TV is not in earphone state.
Troubleshooting Guide
31
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.Outdoor antennas are recommended for best results if not using cable. The most common types oftelevision interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TVsystem, the disturbance may be caused by the local cable company broadcast.
IGNITION:Black spots or horizontal streaks may appear, picture, may flutter or drift.Usually caused by interference from automobile ignition systems, neonlamps, electric drills and other electric appliances.
GHOSTS:Ghosts are caused by the television signal following two paths. One is thedirect path and the other is reflected from tall buildings, hills or otherobjects. Changing the direction or position of the antenna may improve thereception.
SNOW:If your receiver is located in the fringe area of a television station where thesignal is weak, your picture may be marred by the appearance of small dots.When the signal is extremely weak, it maybe necessary to install anexternal antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:This interference produces moving ripples or diagonal streaks, and in somecases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION:A slight picture size variation is quite normal when you adjust theCONTRAST or BRIGHTNESS setting.
CARE AND MAINTENANCETo prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on thereceiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wipingthe plastic parts. Mild soap and a soft, damp cloth may be used.
Troubleshooting Guide
Specifications
32
Note: Design and specifications are subject to change without notice.
CATV
Power Supply:Power Consumption:Dimensions (mm):Weight (kg):CRT:
AC 240V, 50Hz200W874 (W) x 567 (H) x 555 (D)6576cm
TV system & channel rangeSystemPAL-B/G
VHF UHF2-12 21-69
TELETEXTColour System:Stereo/bilingual system:Sound output:Accessory:
WST TELETEXTPAL-BG, NTSC (AV)NICAM-BG, IGR-BG12W / 8Remote controller x 1
X~Z+2, S1~S41
PALSONIC CORPORATION PTY LTD1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIATEL: (02) 9313 7111FAX: (02) 9313 7555www.palsonic.com.au
PALSONIC CUSTOMER SERVICETELEPHONE
AUSTRALIA: 1300 657 888
604-TG3213-00