oxytx 01 v1 en 0720 datasheet...oxytx oxygen analyser the oxytx is an intrinsically safe oxygen...
TRANSCRIPT
OxyTxOxygen Analyser
The OxyTx is an intrinsically safe oxygen analyser / transmitter. It is a surface mounted device with a remote plug-in sensor and is suitable for locating within hazardous areas.
The OxyTx utilizes solid state ceramic technology and is designed to measure oxygen concentration in harsh process applications in the presence of solvent and acidic vapors.
The OxyTx is suitable for use with the Ntron OC-24 oxygen sensor. The sensor is remote mounted for ease of integration in an extractive sampling system or in situ via a tri-clamp or ANSI 150 process connection.
FeaturesApplications» Intrinsically Safe device with an IP66
ABS Housing
» Certifiedforuseinhazardousareaswhen powered by an intrinsically safe barrier
» ATEXApproved,CertifiedtoEExiaIIC T4, ATEX II 2 G
» Large 4 Digit LCD display for local % O2 concentration readout
» Analogue 4-20mA output for retransmission of measured signal
» Non-intrusive user calibration by push buttons
Issue No: OXYTX_01_V1_EN_0720
» Centrifuges» Gloveboxes» Storage vessels» Nitrogen generation» Pharmaceutical industry» Chemical industry
II 2G
OxyTxOxygen Analyser
Technical SpecificationsPerformanceTransmitter Model OxyTxGas Type / Range Oxygen (O2) / 0 - 25%
Sensor Type Solid State Ceramic Sensor (OC-24)
Sensor Life 2 to 3 years application dependant
Response Time (T90) <12 seconds
Power Requirements 2-Wire Loop Powered 7-30 VDC (24VDC nominal) viasuitable Isolation Barrier if used in Hazardous Area
Mounting Surface mount by 2 x fasteners (M6)
Display 4 Digit LCD
Environmental Rating IP66
Operating Humidity 0 to 95% RH non-condensing
Analogue Output 4 to 20mA current loop powered
Resolution 0.1%
Temperature range -20°C to +50°C
User Interface 4 Push Buttons
Material ABS with Stainless steel identification label
Dimensions 140mm (h) x 122mm (w) x 75mm (d)
Weight 800 grams
ATEX Certification ATEX II 2 G EEx ia II C T4
Ntron Gas Measurement Unit 2, Mullaghboy Industrial Park, Navan, Co. Meath, C15 XD61, IrelandPhone: +353(0)46 9071333Fax: +353 (0)46 9071331Email: [email protected] www.ntron.com
Ntron Gas Measurement adopts a continuous development programme which sometimes necessitates specification changes without notice.
Issue No: OXYTX_01_V1_EN_0720 © 2020 Ntron Ltd.
SENZTXOxygen
Transmitter
MicroxOxygenAnalyser
Related Products
SF82Dew Point
Transmitter
Minox iATEX Rated
O2 Transmitter
Microx-OLOnline Oxygen
Analyser
Yellow BoxPortable O2Analyser
GazTrakPortable oxygen &
moisture measurement
Ordering informationModel Range (O2) Sensor type Power Supply Part no
OxyTx 101 0 - 25% Electrochemical: OC-48 85-230 VAC(50-60Hz) 02-238OxyTx 103 0 - 25% Solid State Ceramic: OC-24 85-230 VAC(50-60Hz) 01-510
5m cable as standard on all models - 10m / 15m / 20m / 30m cables also available - contact [email protected] for more information