350

mm

30 mm

Venti® 30

45 mm

350

mm

Venti® 45

CONSTRUCTION

HYGIENE

AGRO

AGRO HONDEN

AGRO VARKENS

AGRO KALVEREN

nv PANELTIM® Industrielaan 38 8810 Lichtervelde BelgiumTel. +32 (0)51 72 67 60 Fax +32 (0)51 72 49 43

paneltim@paneltim.com WWW.PANELTIM.COM

PANELTIM® VENTI® DIVISIONSPATENT 98201105.8-2313

These Paneltim® Venti® panels are injected with a row of vertical openings:

Venti® 30 mm: openings with a width of 30 mm x a height of 350 mm per 100 mm.

Venti® 45 mm: openings with a width of 45 mm x a height of 350 mm per 200 mm.

Visual contact: The visual contact through the row of vertical openings in the Venti® panels reduces stress because there is no closed-in effect.

The fact that the narrow openings start half way up the panels means that the smallest piglets, which are the most vulnerable to the transfer of diseases, have limited physical contact.

The pigs enjoy the air circulation through the openings in the divisions or in the pen fronts.

The effect of a partially slatted floor, can be reproduced in these divisions by having part solid and part ventilated. In this case we deliver a combination panel: solid and Venti®, manufac-tured in 1 piece. This means it is possible to influence the pigs’ dunging habits.

Paneltim® panels are made of Polypropylene copolymer (PP copo) and are resistant to practically all chemical substances and to dynamic shocks. The panels have a light weight, which makes the installation of big sheets in one piece easy, with a minimum of fitting parts.

These panels can easily be installed as divisions with several dimensions with variable height. Standard sizes can be cut and welded to form panels of almost any size. The panels are sealed all round so that dirt, mould, and bacteria cannot accumulate inside.