part 2 financial bid schedule (bill) of … revised boq of... · piping, hydrant and accessories...

TENDER AND CONTRACT DOCUMENT

Name of Work:-“Construction of Administrative Block, Academic Building, Library, Lecture Hall etc. of National Institute of Technology Meghalaya at Sohra (Cherrapunji), Meghalaya-Package-I”

Tender No.: RITES/CP/TC/NIT Meghalaya/PKG-I/Financial Bid/R1/2014

PART 2

FINANCIAL BID

SCHEDULE (BILL) OF QUANTITIES

JULY-2014

Tender Document issued to _____________ _______________________________ (name of Tenderer) _________________________________________ (Address of Tenderer) Signature of Officer issuing the Document with Designation and Date of issue ________ (Name & Designation)

Non Schedule Items

S. No. Estimated Cost (Rs.) Total Quoted amount in Figures (Rs.)

Total Amount (In Rupees)

(+) or (-) in Figure (+) or (-) in words

A

912525288.91B

C

50907557.75

SIGNATURE OF AUTHORIZED SIGNATORY OF TENDERER

NAME OF SIGNATORY

NAME AND SEAL OF TENDERER

Total of CIVIL Works including Plumbing Works

Fire -Fighting Works

Electrical , Fire Alarm System, & LIFT

Construction Of National Institute Of Technology Meghalaya at SohraConstruction of Administrative Block, Academic Building, Library, Lecture Hall etc. Of National Institute of Technology Meghalaya at Sohra (Cherrapunji) Meghalaya-Package-

I

Grand SummaryCPWD DSR-2013 Items

Discription Percentage above (+) or below (-) the Estimated cost as quoted.

GRAND TOTAL OF ALL SCHEDULES (A) TO (C) AFTER APPLYING REBATE IN RUPEES (In

Fi )In Words

TOTAL OF ALL SCHEDULES (A) TO (C)

GRAND TOTAL OF ALL SCHEDULES (A) TO (C)

UN CONDITIONAL REBATE (If ANY)

Schedule Item DSR - 2013 Non-Schedule ItemA CIVIL WORKS1 EARTH WORK 10899486.322 CONCRETE WORK 56224910.753 RCC WORK 393600476.314 BRICK WORK 12208621.055 STONE WORK 16213520.256 MARBLE WORK 2410821.957 WOOD WORK 6821001.308 STEEL WORK 156762821.559 FLOORING WORK 44607961.3010 ROOFING WORK 24254524.9511 FINISHING WORK 68757026.4312 ALUMINIUM WORK 107199337.1513 WATER PROOFING WORK 1459465.9014 ROAD WORK 393284.15

a Sub total-1 901813259.36

Construction Of National Institute Of Technology Meghalya at Sohra

Abstract Package-I (Academic , Admin, Lecture hall, Library, Work Shop, ESS, & Check Dam)

SUMMARY OF COST FOR CIVIL WORKS

S. No. Name of Work Amount

SECTION DESCRIPTION AMOUNT FIGURES( In Rs. )

DSR ITEMSI SANITARY FIXTURES 6532684.65II INTERNAL DRAINAGE 346444.90III INTERNAL WATER SUPPLY 3832900.00

TOTAL 10712029.55

NON DSR ITEMSI SANITARY FIXTURESII INTERNAL DRAINAGEIII INTERNAL WATER SUPPLYIV MISCELLANEOUS ITEMS.

TOTAL

Construction Of National Institute Of Technology Meghalya at SohraPlumbing Work of Package-I (Academic , Admin, Lecture hall, Library, Work Shop, ESS, & Check Dam)

SUMMARY OF COST FOR PLUMBING WORKS

SECTION ITEM DESCRIPTION Total Amount (In Rs.)

1 N.S.I. PIPING, HYDRANT and ACCESSORIES SYSTEM

Total

Construction Of National Institute Of Technology Meghalya at SohraFire Fighting Package-I (Acdemic , Admin, Lecture hall, Library, Work Shop, ESS, & Check Dam)

SUMMARY OF COST FOR FIRE FIGHTING WORKS

A Electrical Works

I ELECTRICAL PANELS -

II LT CABLE & TERMINATION 30,76,196.00

III CABLE TRAY 71,808.75 IV DISTRIBUTION BOARD 15,40,651.00 V SUBMAIN WIRING 11,61,050.00 VI POINT WIRING 407,63,745.00

VII LIGHT FIXTURES 6,86,565.00 VIII LIGHTNING PROTECTION 6,45,278.00

IX EARTHING 2,90,928.00

X POWER BACKUP & LIGHTING CONTROL SYSTEM 26,11,366.00

XI FIRE ALARM -

XII PUBLIC ADDRESS SYSTEM - XIII CCTV SYSTEM 58,640.00 XIV SAFETY EQUIPMENTS 1,330.00 XV DEHUMIDIFICATION

Total of Electrical works(A) 509,07,557.75

B Lift Works

Grand Total (A+B)

Construction Of National Institute Of Technology Meghalya at SohraElectrical Works Package-I (Academic , Admin, Lecture hall, Library, Work Shop, ESS, & Check Dam)

SUMMARY OF COST FOR ELECTRICAL WORKS Sub Head Name of Work Amount (DSR) Amount (NS)

S.No. DSR 2013 Description of Items Unit Quantity Rate Amount

CIVIL WORK SCHEDULED ITEMSEARTH WORKI. Schedule Item

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual meansover areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan)including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposedearth to be levelled and neatly dressed.

2.6.1 All kinds of soil cum 2,373.00 146.50 347644.50

2 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) / manual meansover areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan)including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposedearth to be levelled and neatly dressed.

a 2.7.1 Ordinary rock cum 413.00 227.80 94081.40b 2.7.3 Hard rock (blasting prohibited) cum 413.00 571.90 236194.70

3 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual meansin foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, lift upto 1.5 m, including gettingout the excavated soil and disposal of surplus excavated soil as directed, within a leadof 50 m.

2.8.1 All kinds of soil. cum 5,577.00 148.25 826790.25

4 2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual means infoundation trenches or drains not exceeding 1 .5m in width or 10 sqm on plan includinggetting out the excavated soil and disposal of surplus excavated soils as directed,dressing of sides and ramming of bottoms, lift upto 1.5 m, including within a lead of50m.

a 2.9.1 Ordinary rock cum 1,135.00 244.90 277961.50b 2.9.3 Hard rock (blasting prohibited) cum 1,222.00 574.15 701611.30

Construction Of National Institute Of Technology Meghalya at SohraPackage-I (Academic , Admin, Lecture hall, Library, Work Shop, ESS, & Check Dam)

Bill of Quantity for Scheduled Items


5 2.10 Excavating trenches of required width for pipes, cables, etc including excavation forsockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m includinggetting out the excavated soil, and then returning the soil as required, in layers notexceeding 20 cm in depth, including consolidating each deposited layer by ramming,watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m :

2.10.1 All kinds of soil2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 1,160.00 192.75 223590.00

6 2.11 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depthexceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item fordepth upto 1.5 metre). metre 1,160.00 260.21 301843.60

7 2.12 Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depthexceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basicitem for depth upto 1.5 metre.) metre 150.00 670.77 100615.50

8 2.13 Excavating trenches of required width for pipes, cables, etc, including excavation forsockets, depth upto 1.5 m including getting out the excavated materials, returning thesoil as required in layers not exceeding 20 cm in depth, including consolidating eachdeposited layers by ramming, watering etc., stacking serviceable material formeasurements and disposal of unserviceable material as directed, within a lead of 50m:

2.13.1 Ordinary rock :a 2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. metre 100.00 414.75 41475.00

2.13.3 Hard rock (blasting prohibited)b 2.13.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre 390.00 802.35 312916.50

9 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depthupto 1.5 metre.) metre 490.00 842.47 412809.08

10 2.15 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3min depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depthupto 1.5 metre.) metre 100.00 1094.94 109494.00

11 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 12,488.00 101.50 1267532.00

12 2.26 Extra for every additional lift of 1.5 m or part thereof in.


a 2.26.1 All Kind Of Soil Cum 153.00 41.75 6387.75b 2.26.2 Ordinary or hard rock cum 341.00 74.90 25540.90

13 2.27 Supplying and filling in plinth with Local sand under floors including, watering, rammingconsolidating and dressing complete. cum 2,094.00 843.65 1766603.10

14 2.34 Supplying chemical emulsion in sealed containers including delivery as specified..

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 5,006.00 185.95 930865.70

15 16.3 Supplying and stacking at site. 16.3.9 Good earth. cum 5,368.00 308.35 1655222.80

16 1.1 Carriage of Material by mechanical Transport Including loading unloading andSacking :

a 1.1.2 Excavated Earth with 5km lead. Cum 3,448.00 153.30 528578.40b 1.1.4 Excavated Rock with 5 km lead. Cum 2,796.00 245.29 685830.84c 1.1.4 Excavated Rock with 2 KM lead. Cum 250.00 183.59 45897.50

TOTAL OF EARTH WORK 10899486.32CONCRETE WORKI. Schedule Item

17 4.1 Providing and laying in position cement concrete of specified grade excluding the costof centring and shuttering - All work upto plinth level :

4.1.8 1:4:8 (1 cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 2,188.00 3920.65 8578382.20

18 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plainwindow sills, fillets, sunken floor,etc., up to floor five level,excluding the cost ofcentering, shuttering and finishing :


a 4.2.2 1:1½ :3 (1 cement: 1½ coarse sand:3 graded stone aggregate 20 mm nominal size).

cum 20.00 6218.20 124364.00b 4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

cum 20.00 5822.15 116443.00

19 4.6 Providing and fixing at or near ground level precast cement concrete in kerbs, edgingsetc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement :3 coarse sand), including the cost of required centering, shuttering complete.

4.6.1 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)cum 78.00 5160.60 402526.80

20 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). sqm 1,268.00 220.60 279720.80

21 4.12 Extra for providing and mixing water proofing material in cement concrete work @ 1 kgper 50kg of cement. Kg 325.00 44.35 14413.75

22 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approvedquality using 1.7kg per square metre on damp proof course after cleaning the surfacewith brushes and finally with a piece of cloth lightly soaked in kerosene oil.

sqm 2,728.00 108.75 296670.00

23 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brickballast 40mm nominal size well rammed and consolidated and grouted with fine sandincluding finishing the top smooth. sqm 2,348.00 378.95 889774.60

24 4.8 Providing and fixing up to floor five level precast cement concrete hollow blockincluding hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarsesand), cost of required centering, shuttering complete.

4.8.1 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

cum 7,029.00 6476.40 45522615.60


TOTAL OF CONCRETE WORK 56224910.75R C C WORK

I. Schedule Item25 5.9 Centring and shuttering including strutting, propping etc. and removal of form for :

a 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. sqm 5,851.00 186.40 1090626.40b 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string

courses etc. sqm 1,206.00 334.50 403407.00c 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 33,487.00 371.80 12450466.60d 5.9.4 Shelves Sqm 123.00 371.80 45731.40e 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 37,183.00 309.80 11519293.40f 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 19,650.00 423.00 8311950.00g 5.9.7 Stairs, (excluding landings) except spiral-staircases. sqm 749.00 375.65 281361.85h 5.9.14 Extra for shuttering in circular work (20% of respective centring and shuttering item

i Foundations, footings, bases of columns, etc. for mass concrete. sqm 975.00 37.28 36348.00ii Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 6,001.00 61.96 371821.96

i 5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills,string courses, bands, copings, bed plates, anchor blocks and the like sqm 333.00 186.40 62071.20

j 5.9.16 Edges of slabs and breaks in floors and walls5.9.16.1 Under 20 cm wide metre 5,366.00 111.70 599382.20

k 5.9.19 Weather shade, Chajjas, corbels etc., including edges sqm 931.00 468.20 435894.20

26 5.11 Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels,over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured)

5.11.1 Suspended floors, roofs, landing, beams and balconies (Planarea to be measured).

sqm 32,636.00 145.60 4751801.60

27 5.16 Providing, hoisting and fixing up to floor five level precast reinforced cement concretein shelves, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost ofrequired centering, shuttering and finishing with neat cement punning on exposedsurfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 12.5 mm nominal size).

cum 43.00 11104.30 477484.90


28 5.18 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 gradedstone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire,including centering and shuttering, roughening cleaning, fixing and finishing in cementmortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs,sills and soffits.

5.18.1 50 mm thick sqm 3,999.00 683.80 2734516.20

29 5.22 Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placingin position and binding all complete.Upto Plinth

5.22.6 Thermo-Mechanically Treated bars. kg 5,55,045.00 66.50 36910492.50

30 5.22 A Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placingin position and binding all complete.Above Plinth

5.22A.6 Thermo-Mechanically Treated bars. kg 28,77,419.00 66.50 191348363.50

31 5.29 Providing and fixing sheet covering over expansion joints with iron screws as perdesign to match the colour / shade of wall treatment.

5.29.2 Aluminium fluted strips 3.15mm thick.5.29.2.2 200 mm wide. metre 72.00 452.80 32601.60

32 5.30 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.projections. metre 3,189.00 27.85 88813.65

33 5.33 Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content asper approved design mix, including pumping of concrete to site of laying but excludingthe cost of centering, shuttering, finishing and reinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction ofEngineer-in-charge(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cementused as per design mix is payable/recoverable separately).

a 5.33.1 All work upto Plinth level. cum 3,152.00 5704.45 17980426.40b 5.33.2 All work From Plinth Level & upto floor V level. cum 14,694.00 6353.00 93350982.00

34 5.34 Extra for providing richer mixes at all floor levels.Note:- Excess/less cement over the specified cement content used is payable/recoverable separately.

a 5.34.1 Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cementcontent considered in M-30 is @ 340 kg/cum).

cum 2,032.00 64.15 130352.80


b 5.34.2 Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note : Cementcontent considered in M-35 is @ 350 kg/cum).

cum 3,277.00 128.35 420602.95

35 5.35 Add for using extra cement in the items of design mix over and abovethe specified cement content therein. quintal 15,760.00 619.65 9765684.00TOTAL OF RCC WORK 393600476.31BRICK WORKI. Schedule Item

36 6.38 Providing and laying autoclaved aerated cement blocks masonry with 100mm thickAAC blocks in super structure above plinth level up to floor V level in cement mortar1:4 (1 cement : 4 coarse sand ) The rate includes providing and placing in position 2Nos. 6 mm dia M.S. bars at every third course of masonry work.

cum 2,529.00 4827.45 12208621.05TOTAL OF BRICK WORK 12208621.05STONE WORK

I. Schedule Item37 7.1 Random rubble masonry with hard stone in foundation and plinth including levelling up

with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate20mm nominal size) upto plinth level with :

7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand). cum 618.00 3410.50 2107689.00

38 7.2 Random rubble masonry with hard stone in superstructure above plinth level and uptofloor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level andthe like.

7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand). cum 2,472.00 4087.25 10103682.00

39 7.6 Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :

7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1,017.00 3935.25 4002149.25TOTAL OF STONE WORK 16213520.25MARBLE WORKI. Schedule Item


40 8.2 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded andprepolished) machine cut for kitchen platforms, vanity counters ,window sills , faciasand similar locations of required size of approved shade, colour and texture laid over20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curingmoulding and polishing to edge to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade8.2.2.2 Area of slab over 0.50 sum. sqm 414.00 3769.70 1560655.80

41 8.3 Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as perdesign approved by Engineer-in-Charge.

8.3.2 Granite work. metre 807.00 210.65 169994.55

42 8.4 Extra for fixing marble /granite stone over and above corresponding basic item, in faciaand drops of width upto 150 mm with epoxy resin based adhesive including cleaningetc. complete. metre 807.00 225.75 182180.25

43 8.5 Extra for providing opening of required size & shape for wash basins/ kitchen sink inkitchen platform, vanity counters and similar location in marble/Granite/stone workincluding necessary holes for pillar taps etc. including rubbing and polishing of cutedges etc. complete. each 184.00 350.80 64547.20

44 8.8 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surfacebacking including drilling necessary holes and the cost etc complete.

8.8.1.2 Fastener with threaded dia 10 mm. each 15,733.00 27.55 433444.15TOTAL OF MARBLE WORK 2410821.95WOOD WORKI. Schedule Item

45 9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.sqm 1,183.00 1684.75 1993059.25

46 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth onall edges of shutters (over all area of door shutter to be measured) Over item no. 9.20and 9.21. sqm 1,183.00 348.45 412216.35


47 9.24 Extra for providing vision panel not exceeding 0.1 sum in all type of flush doors (cost ofglass excluded) (overall area of door shutter to be measured) :

9.24.1 Rectangular or square. sqm 966.00 133.55 129009.30

48 9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to bemeasured). sqm 466.00 98.75 46017.50

49 9.84 Providing and fixing IS : 3564 marked aluminium extruded section body tubular typeuniversal hydraulic door closer with double speed adjustment with necessaryaccessories and screws etc. complete. each 1,072.00 1027.20 1101158.40

50 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6levers and a pair of lever handles with necessary screws etc. complete (best make ofapproved quality). each 827.00 712.00 588824.00

51 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade with nuts and screws etc. complete :

a 9.96.1 300x16 mm each 39.00 215.30 8396.70b 9.96.2 250x16 mm each 167.00 180.45 30135.15

52 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating notless than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour orshade with necessary screws etc. complete :

a 9.97.1 300x10 mm each 1,188.00 108.10 128422.80b 9.97.3 200x10 mm each 1,126.00 76.40 86026.40c 9.97.5 100x10 mm each 4,377.00 49.85 218193.45

53 9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent or dyed to required colour or shadewith necessary screws etc. complete :

a 9.100.1 125 mm each 2,292.00 66.95 153449.40b 9.100.2 100 mm each 5,704.00 52.80 301171.20c 9.100.3 75 mm each 174.00 44.90 7812.60

54 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour and shade with necessary screws etc. complete.

9.101.2 Twin rubber stopper each 1,144.00 80.20 91748.80


55 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain ingloss / matt / suede finish with high density protective surface layer and reverse side ofadhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive ofapproved quality.

9.127.2 1.0 mm thick. sqm 2,300.00 663.20 1525360.00TOTAL OF WOOD WORK 6821001.30S T E E L WORKI. Schedule Item

56 10.3 Providing and fixing in position collapsible steel shutters with vertical channels20x10x2mm and braced with flat iron diagonals 20x5mm size, with top and bottom railof T-iron 40x40x6mm, with 40mm dia steel pulleys, complete with bolts, nuts, lockingarrangement, stoppers, handles, including applying a priming coat of approved steelprimer.

sqm 142.00 4977.95 7,06,868.90

57 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths interlocked together through their entire length and jointed together at the end byend locks mounted on specially designed pipe shaft with brackets, side guides andarrangements for inside and outside locking with push and pull operation completeincluding the cost of providing and fixing necessary 27.5cm long wire springs gradeNo.2 and M.S. top cover of required thickness for rolling shutters.

10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. sqm 236.00 2044.15 4,82,419.40

58 10.7 Providing and fixing ball bearing for rolling shutters. each 82.00 436.45 35,788.90

59 10.16 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trussesetc. including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer, including welding and bolted with special shaped washers etc.complete.

10.16.3 Electric resistance or induction butt welded tubes. kg 12,45,863.00 117.80 1467,62,661.40

60 10.19 Providing and fixing mild steel round holding down bolts with nuts and washer platescomplete.

kg 24,917.00 71.85 1790286.45


61 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fanclamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with itstop surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S.sheet box by means of 3.3mm dia. round headed screws, one lock at the corners.Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

each 2,137.00 138.00 294906.00

62 10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer using structural steel etc.as required.

a 10.25.1 In stringers, treads, landings etc. of stair cases including use of chequered platewherever required, all complete

kg 2,000.00 74.30 148600.00b 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

kg 2,000.00 86.50 173000.00

63 D-10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing,balcony railing, staircase railing and similar works, including applying priming coat ofapproved steel primer.

10.26.1 M.S. tube kg 2,496.00 97.45 243235.20

64 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nutsand bolts complete, i/c fixing the railing with necessary accessories & stainless steeldash fasteners , stainless steel bolts etc., of required size, on the top of the floor or theside of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.).

kg 10,023.00 611.10 6125055.30TOTAL OF STEEL WORK 156762821.55FLOORING WORKI. Schedule Item


65 11.5 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2(1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume,hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturesspecifications. This includes cost of cement slurry, but excluding the cost of nosing ofsteps etc. complete.

sqm 5,126.00 528.25 2707809.50

66 11.6 Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3coarse sand) finished with a floating coat of neat cement.

11.6.1 18 mm thick. sqm 163.00 299.20 48769.60

67 11.20 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointedwith neat cement slurry mixed with pigment to match the shade of tiles, includingrubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand).

11.20.1 Light shade using white cement. sqm 278.00 1008.70 280418.60

68 11.23 Marble stone flooring with 18mm thick marble stone (sample of marble shall beapproved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry includingrubbing and polishing complete with :

11.23.3 Agaria White sqm 105.00 2130.25 223676.25

69 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

11.26.1 25 mm thick. sqm 980.00 1071.70 1050266.00

70 11.27 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm(average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with greycement slurry mixed with pigment to match the shade of the slabs, including rubbingand polishing complete. sqm 248.00 1100.85 273010.80


71 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer ) of approved make in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sumincluding pointing in white cement mixed with pigment of matching shade complete.

sqm 5,266.00 793.60 4179097.60

72 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specifiedby the manufacturer) of 1st quality conforming to IS : 15622 of approved make incolours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cementand matching pigment etc., complete. sqm 1,694.00 822.10 1392637.40

73 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption's less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement andmatching pigments etc., complete.

11.41.2 Size of Tile 60x60 cm sqm 18,357.00 1402.55 25746610.35

74 11.46 Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption's less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including grouting thejoints with white cement and matching pigments etc., complete.

11.46.2 Size of Tile 60x60 cm sqm 1,494.00 1411.45 2108706.30

75 11.34 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick levelinglayer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumenpenetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in positionafter dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth andfinished complete. sqm 334.00 6377.10 2129951.40

76 16.64 Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm thicknominal size including spreading, well ramming, consolidating and grouting withjamuna sand including finishing smooth etc. complete as per direction of Engineer-in-charge. sqm 6,600.00 106.7 704220.00


77 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paverblock of M -30 grade made by block making machine with strong vibratory compaction,of approved size, design & shape, laid in required colour and pattern over and including50mm thick compacted bed of fine sand, filling the joints with fine sand etc. allcomplete as per the direction of Engineer-in-charge. sqm 6,750.00 557.45 3762787.50TOTAL OF FLOORING WORK 44607961.30ROOFING WORKI. Schedule Item

78 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1cement : 3 fine sand) as per standard design :

12.21.1 In 75x75mm deep chase Metre 232.00 127.95 29684.40

79 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size)over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1cement : 3 coarse sand) and a coat of neat cement rounding the edge sand makingand finishing the outlet complete. Each 19.00 167.45 3181.55

80 12.34 Providing and fixing thermal insulation of ceiling (under deck insulation) with ResinBonded Fibre glass wool conforming to IS : 8183 density 24kg/m3, 50mm thick,wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60 cm and wire mesh of 12.5mm x 24g wire and mesh, for top most ceiling ofbuilding. sqm 24,674.00 465.10 11475877.40

81 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coatedthickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratcheswhile transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required.

sqm 9,524.00 615.35 5860593.40


82 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steelgrade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns using self drilling/ self tapping screws complete :

a 12.51.1 Ridges plain (500 - 600mm). metre 1,108.00 629.25 697209.00b 12.51.2 Flashings/ Aprons.( Upto 600 mm) metre 846.00 606.70 513268.20c 12.51.6 Gutter .(600 mm over all girth). metre 1,740.00 796.05 1385127.00

83 12.45 Providing and fixing false ceiling at all height including providing and fixing of framework made of special sections, power pressed from M.S. sheets and galvanized withzinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting ofangle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mmdia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of25x10x0.50 mm of required length with nuts & bolts of required size and other end ofangle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centreto centre, shall be fixed in a direction perpendicular to G.I. intermediate channel withconnecting clips made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high havingflanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition withthe help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section and perimeter channel withthe help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishing to a flush finish of tapered and square edges of the board with recommendedjointing compound , jointing tapes , finishing with jointing compound in 3 layerscovering upto 150 mm or both sides of joint and two coats of primer suitable for board,all as per manufacturer’s specification and also including the cost of making openingsfor light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction of the Engineer inCharge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I.sqm 5,330.00 804.80 4289584.00

TOTAL OF ROOFING WORK 24254524.95FINISHING WORK


I. Schedule Item84 13.1 12 mm cement plaster of mix :

13.1.2 1:6 (1 cement : 6 fine sand) sqm 38,542.00 133.85 5158846.70

85 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :13.2.2 1:6 (1 cement : 6 fine sand) sqm 38,542.00 154.70 5962447.40

86 13.16 6 mm cement plaster of mix :13.16.1 1:3 (1 cement: 3 fine sand) sqm 17,107.00 120.35 2058827.45

87 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3coarse sand) finished rough with sponge.

sqm 23,203.00 231.20 5364533.60

88 13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neatcement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C.slabs and beams. sqm 1,858.00 161.95 300903.10

89 13.21 Extra for providing and mixing water proofing material in cement plaster work inproportion recommended by the manufacturers.Per bag of 50 kg cement used in themix

Kg 4,974.00 46.70 232285.80

90 13.23 Extra for plastering on circular work not exceeding 6 m in radius:a 13.23.1 In one coat sqm 67,031.00 17.05 1142878.55b 13.23.2 In two coats sqm 19,926.00 26.15 521064.90

91 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surfaceto prepare the surface even and smooth complete sqm 59,985.00 100.95 6055485.75

92 13.37 White washing with lime to give an even shade:13.37.1 New work (three or more coats) sqm 5,985.00 14.35 85,884.75

93 13.33 Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) :13.33.1 Flush/ Ruled pointing sqm 2,286.00 111.80 2,55,574.80

94 13.45 Finishing walls with textured exterior paint of required shade :13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming

coat of exterior primer applied @ 2.20kg/10 sqm.sqm 17,800.00 127.10 2262380.00


95 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sum. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sum). sqm 335.00 90.00 30150.00

96 13.50 Applying priming coat :a 13.50.3 3 With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel galvanised iron/steel works sqm 49,747.00 24.95 1241187.65b 13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and manufacture

on steel work (second coat) sqm 9,983.00 13.60 135768.80

97 13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied asper manufacturer's specifications including appropriate priming coat, preparation ofsurface, etc. complete.

13.52.1 On steel work sqm 59,730.00 109.80 6558354.00

98 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand and manufacture,including applying additional coats wherever required, to achieve even shade andcolour

13.81.2 Two coats sqm 59,985.00 41.75 2504373.75

99 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound )content less than 50 grams/ litre, of approved brand and manufacture, includingapplying additional coats wherever required, to achieve even shade and colour.

13.82.2 Two coats sqm 13,127.00 70.75 928735.25

100 13.62 Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade:

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinarypaint of approved brand and manufacture. sqm 9,099.00 92.75 843932.25

101 26.7 Designing, fabricating, testing, installing and fixing in position Curtain WallwithAluminium Composite Panel Cladding, with open grooves for linear as wellascurvilinear portions of the building , for all heights and all levels etc. including:


(a) Structural analysis & design and preparation of shop drawings forpressureequalisation or rain screen principle as required, proper drainage of watertomake it watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium compositepanelcladding in pan shape in metalic colour of approved shades made out of4mm thickaluminium composite panel material consisting of 3mm thick FRgrade mineral coresandwiched between two Aluminium sheets (each 0.5mmthick). The aluminiumcomposite panel cladding sheet shall be coil coated,with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating ofapproved colour and shade on face # 1and polymer (Service) coating on face #2 as specified using stainless steel screws,nuts, bolts, washers, cleats, weathersilicone sealant, backer rods etc.

(c ) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwithserrations and serrated washers to arrest the wind load movement,fasteners, SS 316Pins and anchor bolts of approved make in SS 316, Nylonseparators to prevent bi-metallic contacts all complete required to perform asper specification and drawingTheitem includes cost of all material & labour component, the cost of all mock upsat site,cost of all samples of the individual components for testing in an approvedlaboratory,field tests on the assembled working curtain wall with aluminiumcomposite panelcladding, cleaning and protection of the curtain wall with aluminiumcomposite panelcladding till the handing over of the building for occupation.The Contractor shall providecurtain wall with aluminium composite panel cladding,having all the performancecharacteristics all complete , as per the Architecturaldrawings, as per item description,as specified, as per the approved shop drawingsand as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external faceofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove)shall be measured in sqm. up to two decimal places sqm 2,035.00 3696.65 7522682.75

102 26.2 Semi-unitized Glazing (design, fabrication and installation )1 Designing, fabricating, testing, protection, installing and fixing in position semi(grid)

unitized system of structural glazing (with open joints) for linear as wellas curvilinearportions of the building for all heights and all levels, including


a Structural analysis & design and preparation of shop drawings for thespecified designloads conforming to IS 875 part III (the system must passedthe proof test at 1.5 timesdesign wind pressure without any failure),including functional design of the aluminumsections for fixing glazingpanels of various thicknesses, aluminium cleats, sleeves andsplice platesetc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural andweathersilicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwavecured EPDM gaskets for water tightness, pressure equalisation &drainageand protection against fire hazard including:

b Fabricating and supplying serrated M.S. hot dip galvanised / Aluminiumalloy of 6005 T5brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentionalmovement for achieving perfect verticalityand fixing structural glazing system rigidly tothe RCC/ masonry/structuralsteel framework of building structure using stainless steelanchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nutsandwashers etc. of stainless steel grade 316, of the required capacity andin requirednumbers.

c Providing and filling, two part pump filled, structural silicone sealant andone partweather silicone sealant compatible with the structural siliconesealant of required bitesize in a clean and controlled factory / work shopenvironment , including double sidedspacer tape, setting blocks and backerrod, all of approved grade, brand andmanufacture, as per the approvedsealant design, within and all around the perimeterfor holding glass.

d Providing and fixing in position flashings of solid aluminium sheet 1 mmthick and ofsizes, shapes and profiles, as required as per the site conditions,to seal the gapbetween the building structure and all its interfaces withcurtain glazing to make itwatertight.

e

Making provision for drainage of moisture/ water that enters the curtainglazing systemto make it watertight, by incorporating principles of pressureequalization, providingsuitable gutter profiles at bottom (if required), makingnecessary holes of required sizesand of required numbers etc. complete.This item includes cost of all inputs ofdesigning, labour for fabricating andinstallation of aluminium grid, installation of glazedunits, T&P, scaffoldingand other incidental charges including wastages etc., enablingtemporarystructures and services, cranes or cradles etc. as described above andasspecified. The item includes the cost of getting all the structural andfunctional designchecked and all the shop drawings vetted by the Principalsof the structural glazingsystem.The item also includes the cost of all mock ups at site, cost of all samples oftheindividual components for testing in an approved laboratory, field testson theassembled working structural glazing as specified, cleaning andprotection till thehanding over of the building for occupation. In the end,the Contractor shall provide awater tight structural glazing having all theperformance characteristics etc. all completeas required, as per theArchitectural drawings, as per item description, as specified, as sqm 2,678.00 2466.80 66,06,090.40


103 26.3 Providing, assembling and supplying vision glass panels (IGUs) comprising ofhermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units ofsize and shape as required and specified, comprising of an outer high performanceheat strengthened float glass 6mm thick, of approved colour and shade with reflectivesoft coating on surface # 2 of approved colour and shade, an inner Heat strengthnedclear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary sealand secondary seal (structural silicone sealant) etc. all complete for the requiredperformances, as per the Architectural drawings, as per the approved shop drawings,as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembledin the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels inthe curtain glazing is included in cost of item No.1) For payment, only the actual area ofglass on face # 1 of the glass panels (excluding the areas of the grooves and weathersilicone sealant) provided and fixed in position, shall be measured in sqm.

Sqm 2,086 3948.95 82,39,089.28

26.4 Extra for openable side / top hung vision glass panels (IGUs) including providing andsupplying at site all accessories and hardwares for the openable panels as specifiedand of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. includingnecessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete asper the Architectural drawings, as per the approved shop drawings, as specified and asdirected by the Engineer in-Charge.

Sqm 1,565.00 3032.30 47,45,549.50 TOTAL OF FINISHING WORK 68757026.43

I. Schedule Item104 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sectionsof approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fasteners including necessary fillingup of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing and panelling to be paidfor separately) :

a 21.1.1 For fixed portion.21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 3,145.00 373.00 1173085.00

ALUMINIUM WORK


21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating50 micron) kg 1,83,287.00 380.30 69704046.10

b 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost ofPVC / neoprene gasket required (Fittings shall be paid for separately).

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 910.00 427.60 389116.0021.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating

50 micron) kg 39,548.00 435.05 17205357.40

105 21.2 Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer orgraded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixedin aluminium doors, windows shutters and partition frames with C.P. brass / stainlesssteel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

21.2.2 Pre-laminated particle board with decorative lamination on both sides. sqm 3,882.00 1066.00 4138212.00

106 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with PVC/ neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge . (Cost of aluminium snap beadingshall be paid in basic item) :

21.3.2 With float glass panes of 5.50 mm thickness sqm 4,873.00 1009.00 4916857.00

107 21.4 Providing and fixing double action hydraulic floor spring of approved brand andmanufacture IS : 6315 marked, for doors including cost of cutting floors as required,embedding in floors and cover plates with brass pivot and single piece M.S. sheetouter box with slide plate etc. complete as per the direction of Engineer-in-charge.

a 21.4.1 With stainless steel cover plate each 3.00 2020.05 6060.15b 21.4.2 With brass cover plate minimum 1.25 mm thickness each 14.00 2194.30 30720.20

108 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick &2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. each 10.00 507.90 5079.00

109 21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work byproviding weather silicon sealant over backer rod of approved quality as perarchitectural drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width metre 33,189.00 83.05 2756346.45


110 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of grade AC 15) of approveddesign/pattern, with approved standard section and fixed to the existing window framewith C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cuttingthe grill to proper opening size for fixing and operation of handles and fixing approvedanodised aluminium standard section around the opening, all complete as perrequirement and direction of Engineer-in-charge. (Only weight of grill to be measuredfor payment). kg 17,253.00 398.45 6874457.85TOTAL OF ALUMINIUM WORK 107199337.15

I. Schedule Item111 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

by applying cement slurry mixed with water proofing cement compound consisting ofapplying a) First layer of slurry of cement @ 0.488 kg/sum mixed with water proofing cementcompound @ 0.253 kg/sum. This layer will be allowed to air cure for 4 hours.b)Second layer of slurry of cement @ 0.242 kg/sum mixed with water proofing cementcompound @ 0.126 kg/sum. This layer will be allowed to air cure for 4 hours followedwith water curing for 48 hours.The rate includes preparation of surface, treatment andsealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

sqm 1,178.00 255.00 300390.00. -

112 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cementslurry mixed with water proofing cement compound consisting of applying: a) aftersurface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with waterproofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarsesand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by watercuring for 48 hours. The entire treatment will be taken upto 30cm on parapet wall andtucked into groove in parapet all around. d) fourth and final layer of brick tiling withcement mortar (which will be paid for separately For the purpose of measurement theentire treated surface will be measured.

sqm 2,534.00 356.75 904004.50

WATER PROOFING WORK


113 22.7 Providing and laying integral cement based water proofing treatment includingpreparation of surface as required for treatment of roofs, balconies, terraces etcconsisting of following operations: a) Applying a slurry coat of neat cement using 2.75kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 andapproved by Engineer-in-charge over the RCC slab including adjoining walls upto300mm height including cleaning the surface before treatment. b) Laying brick batswith mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cementmortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer ofcement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge to requiredslope and treating similarly the adjoining walls upto 300 mm height including roundingof junctions of walls and slabs c) After two days of proper curing applying a secondcoat of cement slurry using 2.75kg/ sqm of cement admixed with water proofingcompound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing the surface with trowel withneat cement slurry and making pattern of 300x300 mm square 3mm deep. e) Thewhole terrace so finished shall be flooded with water for a minimum period of twoweeks for curing and for final test. All above operations to be done in order and asdirected and specified by the Engineer-in-Charge :

22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm 289.00 882.60 255071.40TOTAL OF WATWER PROOFING WORK 1459465.90

I. Schedule Item114 16.15 Supplying at site : a 16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3

graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibswherever required as per direction of Engineer-in-charge (cost of earth works inexcavation, concrete works in foundation to be paid separately). cum 20.00 19,081.45 381629.00

b 16.15.2 Welded steel wire fabric of required width having rectangular mesh painted with two ormore coats of enamel paint of approved shade over a coat of primer (Priming &Painting to be paid for separately). kg 129.00 64.55 8326.95

Road Work


115 16.20 Welded steel wire fabric fencing with posts of specified material and of standard designplaced and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement:5 fine sand : 10 graded stone aggregate 40mm nominal size), every 15th post,last but one end post and corner post shall be strutted on both sides and end post onone side only and struts embedded in cement concrete blocks 70x45x50cm of thesame mix, provided with welded steel wire fabric fixed between the posts fitted andfixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire(cost of posts, welded steel wire fabric, painting, earth work in excavation and concreteto be paid for separately) :

sqm 129.00 25.8 3328.20Total of Schedule Item Road work (I) : 393284.15

PLUMBING WORK SCHEDULED ITEMSSubhead I -SANITARY FIXURES

116 17.1 Providing & fixing of water closet squatting pan (indian type w.c.pan) with 100mmsand cast iron P or S trap, 10 liter low level white p.v.c. flushing cistern with manuallycontrolled device (handle lever)conforming to IS:7231,with all fittings and fixturescomlete including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C.pan of size 580x440mm with integral typefoot rests. marked white solid plastic seat and lid. Each 76.00 3265.25 248159.00

117 17.3 Providing & fixing of white vitreous china pedestal type water closet(European type)with seat and lid, 10 liter low level white viterous china flushing cistern C.P.flush bendwith fittings & C.I.brackets ,40mm flush bend, overflow arrangment with specials ofstandard make and mosquito proof coupling of approved municipala design completeincluding painting of fittings and brackets, cutting and making good the wall and Floorswherever required:

17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 133.00 4636.25 616621.25

118 17.7 Providing & fixing wash basin with C.I. brackets, C.P brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets,cutting andmaking good the walls wherever required:

17.7.1 White Vitreous China Wash basin size 630x450mm with a pair of 15 mm C.P.brasspillar taps. Each 187.00 2174.65 406659.55

119 17.10 Providing & fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S 13983 withC.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets,cutting and making good the walls wherever required: Kitchen sink with drain board.


17.10.1.1 510x1040mm bowl depth 250mm Each 14.00 6975.40 97655.60

120 17.11 Providing & fixing white vitreous china laboratatory sink with c.i.brackets.c.p. brasschain with rubber plug 40mm c.p. brass waste and 40mm c.p.brass trap with necessary c.p.brass union complete including painting and brackets,cutting and making good thewall whereever required:

17.11.2 Size 600x450x200mm Each 160.00 2992.45 478792.00

121 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.wastefitting complete.

17.28.2 Flexible pipe17.28.2.1 32 mm dia Each 230.00 72.55 16686.50

122 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 163.00 762.55 124295.65

123 17.71 Providing & fixing PTMT liquid soap container 109mm wide,125mm high and 112mmdistance from wall of standard shape with bracket of the same materials with snapfittings of approved quality and colour. weighing not less than 105 gms.

Each 230.00 181.75 41802.50

124 17.73 Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats withC.P brass screws with concealed fitting arangement of approved quality and colour.

17.73.2 600 mm long toil towel rail with total length of 645mm,width 78mm and effective heightof 88mm, weighing not less than 190 gms. Each 104.00 448.40 46633.60

125 17.78 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Each 41.00 9965.25 408575.25

126 17.8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.. Each 168.00 16681.05 2802416.40


127 8.10 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade.sqm 168.00 2963.40 497851.20

128 18.51 Providing & fixing C.P. brass (Long body)bib cock of approved quality conforming toIS standerd and weight not less then 690 gms.

18.51.1 15 mm nominal bore Each 67.00 609.40 40829.80

129 18.52 Providing and fixing c.p.brass stop cock(concealed) of standard design and ofapproved make conforming to IS:8931 a)15 mm nominal bore Each 23.00 618.70 14230.10

130 18.65 Providing & fixing PTMT soap dish Holder having length of 138mm,breadth 102mm,height of 75mm with concealed fitting arrangements.Weighing not less than 106gms.

Each 226.00 152.70 34510.20

131 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

a) 15mm nominal bore Each 1039.00 506.70 526461.30

132 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2 45 cm length

18.21.2.1 15 mm nominal bore Each 845.00 67.35 56910.75

133 17.34 Providing and Fixing toilet paper holderC.P. brass Each 168.00 339.85 57094.80

134 18.64 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. Each 16.00 114.40 1830.40

135 18.49Providing and fixing C.P.brass bib cock of approved quality conforming to IS:8931

18.49.1 15 mm nomnal bore Each 32.00 458.40 14668.80TOTAL OF SUBHEAD-I SANITARY FIXURES 6532684.65Subhead II -Internal Drainage (Rainwater,Soil,waste & Fittings )

136 12.37 Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand).


12.37.1 Stone ware spout each 45.00 77.60 3492.00

137 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.

a 12.41.1 75 mm diameter (A.S.P.) metre 226.00 134.50 30397.00b 12.41.2 110 mm diameter metre 731.00 218.60 159796.60

138 18.58 Providing & fixing PTMT grating of approved quality and colour18.58.1 Circular type

18.58.1.1 100 mm nominal dia Each 535.00 44.20 23647.00

139 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories forunplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermalexpansion.

A 12.42.1 Couplera 12.41.1.1 75 mm Each 65.00 100.55 6535.75b 12.42.1.2 110mm Each 70.00 133.55 9348.50B 12.42.2 Single Pushfit couplera 12.42.2.1 75 mm Each 40.00 119.10 4764.00b 12.42.2.2 110mm Each 55.00 167.25 9198.75C 12.42.3 Single tee with doora 12.42.3.1 75X75X75 MM Each 35.00 210.55 7369.25b 12.42.3.2 110X110X110 MM Each 32.00 305.35 9771.20D 12.42.4 Single tee without doora 12.42.4.1 75X75X75 MM Each 50.00 187.35 9367.50b 12.42.4.2 110X110X110 MM Each 55.00 244.95 13472.25E 12.42.5 Bend 87.5°a 12.42.5.1 75 mm bend Each 35.00 107.50 3762.50b 12.42.5.2 110 mm bend Each 50.00 160.25 8012.50F 12.42.6 Shoe(plain)a 12.42.6.1 75 mm Shoe Each 35.00 166.75 5836.25b 12.42.6.2 110 mm shoe Each 42.00 290.35 12194.70

140 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised -PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S.screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete.

a 12.43.1 75 mm Each 83.00 156.30 12972.90


b 12.43.2 110 mm Each 95.00 173.75 16506.25Total of Subhead II -Internal Drainage (Rainwater,Soil,waste & Fittings ) 346444.90

DSR 2013ITEM CODE

Subhead III Internal Water supply

141 18.18 Providing & fixing ball valve ( brass) of approved quality,High or low pressure, withplastic floats complete:-

a 18.18.1 15 mm dia nominal bore Nos. 22.00 286.55 6304.10b 18.18.2 20 mm dia nominal bore Nos. 50.00 407.40 20370.00c 18.18.3 25 mm dia nominal bore Nos. 40.00 446.95 17878.00

142 18.60 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 andtested by municipal Board complete with bolts , nuts, rubber insertions etc. (The tailpieces if required will be paid separetely).

18.60.3 150 mm dia nominal bore No. 6.00 6776.20 40657.20

143 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per direction of Engineer inCharge. Concealed work including cutting chases and making good the walls etc.

a 18.8.2 20 mm nominal outer dia .Pipes. Mtr 247.00 281.35 69493.45b 18.8.3 25 mm nominal outer dia .Pipes. Mtr 335.00 336.25 112643.75c 18.8.4 32 mm nominal outer dia .Pipes. Mtr 407.00 407.40 165811.80

144 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply including all CPVC plain & brass threaded fittingsincluding fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as perdirection of Engineer in Charge. Internal work - Exposed on wall

a 18.7.5 40 mm nominal outer dia .Pipes. Mtr 120.00 395.60 47472.00b 18.7.6 50 mm nominal outer dia .Pipes. Mtr 132.00 569.20 75134.40

18.7


145 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

External work a 18.9.7 62.50 mm nominal inner dia Pipes. Mtr 37.00 1453.75 53788.75b 18.9.8 75 mm nominal inner dia .Pipes. Mtr 19.00 2042.65 38810.35c 18.9.9 100mm nominal inner dia .Pipes. Mtr 16.00 2823.45 45175.20d 18.9.10 150 mm nominal inner dia .Pipes. Mtr 15.00 3408.80 51132.00

146 18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts,rubber insertions etc. complete (the tail pieces, tapers etc if required will be paidseparately):

18.59.1 50 mm dia Each 20.00 4773.30 95466.00

147 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting andmaking good the walls etc.

a 18.10.1 15 mm dia nominal bore Mtr 164.00 181.35 29741.40b 18.10.2 20 mm dia nominal bore Mtr 249.00 221.50 55153.50c 18.10.3 25 mm dia nominal bore Mtr 506.00 282.30 142843.80d 18.10.4 32 mm dia nominal bore Mtr 462.00 333.50 154077.00e 18.10.5 40 mm dia nominal bore Mtr 711.00 413.25 293820.75f 18.10.6 50 mm dia nominal bore Mtr 800.00 512.10 409680.00

148 18.40 Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint ofapproved quality.

a 18.40.1 15mm diameter pipe. Mtr 164.00 5.25 861.00b 18.40.2 20mm diameter pipe Mtr 249.00 6.15 1531.35c 18.40.3 25mm diameter pipe Mtr 506.00 7.90 3997.40d 18.40.4 32mm diameter pipe Mtr 462.00 9.35 4319.70e 18.40.5 40mm diameter pipe Mtr 711.00 10.65 7572.15f 18.40.6 50mm diameter pipe Mtr 800.00 12.65 10120.00g 18.40.7 65mm diameter pipe Mtr 106.00 15.60 1653.60h 18.40.8 80mm diameter pipe Mtr 137.00 18.05 2472.85


149 18.86 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JISstandard 3448 complete with press type fitting (fitting shall be paid for separately) i/cfixing of the pipe with clamps at 1.00m spacing and also including cutting of chasesand making good the walls including testing of joints complete as per direction ofEngineer -in-charge. (The pipe length inserted in the fitting shall not be measured forpayment) Internal work - Concealed Pipe

a 18.86.1 15.88 mm outer dia .Pipes. metre 536.00 318.80 170876.80b 18.86.2 22.22 mm Outer dia pipes metre 755.00 453.00 342015.00

150 18.87 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ringsealing gasket of EPDM material of required dia as per dirction of Engineer-in-charge.

Coupling/Socketa 18.87.1 For 15.88 mm outer dia pipe each 271.00 66.20 17940.20b 18.87.2 For 22.22 mm outer dia pipe each 409.00 102.20 41799.80

151 18.88 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ringsealing gasket of EPDM material of Providing and fixing required Stainless Steel Fittingof press fit design of grade AISI 304 conforming toJWWA G116 standard with V-profileor M-profile and with O-ring sealing gasket of EPDM material of required dia as perdirction of Engineer-in-charge.Reducer

18.88.1 For 22.22 mm x 15.88 mm outer dia pipe each 122.00 119.65 14597.30


Slip Coupling/ Socketa 18.89.1 For 15.88 mm outer dia pipe each 122.00 131.25 16012.50b 18.89.2 For 22.22 mm outer dia pipe each 100.00 213.70 21370.00


Elbow 90o

a 18.90.1 For 15.88mm outer dia pipe each 126.00 99.90 12587.40b 18.90.2 For 22.22 mm outer dia pipe each 126.00 177.70 22390.20



Reducing Elbow 90o

18.91.1 For 22.22 mm x15.88 mm outer dia pipe each 162.00 171.90 27847.80


Equal Teea 18.92.1 For 15.88 mm outer dia pipe Each 126.00 184.70 23272.20b 18.92.2 For 22.22 mm outer dia pipe Each 173.00 268.30 46415.90


Reducing Teea 18.93.1 For 22.22mm x 15.88 mm outer dia pipe Each 126.00 261.35 32930.10b 18.93.2 For 22.58mm x 15.88 mm outer dia pipe Each 173.00 325.20 56259.60


Male Thread Teea 18.94.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 126.00 332.20 41857.20b 18.94.2 For 22.22 mm outer dia x 15 mm nominal dia threaded Each 173.00 399.55 69122.15c 18.94.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 157.00 427.45 67109.65


Female Thread Teea 18.95.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 125.00 339.15 42393.75b 18.95.2 For 22.22 mm outer dia x 15 mm nominal dia threaded Each 150.00 399.55 59932.50


c 18.95.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 122.00 413.50 50447.00


Female Thread Connector/ Adaptera 18.96.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 153.00 220.70 33767.10b 18.96.2 For 22.22 mm outer dia x 15 mmnominal dia threaded Each 147.00 267.15 39271.05c 18.96.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 126.00 275.30 34687.80


Male threaded Connentor/Adapter.a 18.97.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 133.00 224.15 29811.95b 18.97.2 For 22.22 mm outer dia x 15 mm nominal dia threaded Each 126.00 263.65 33219.90c 18.97.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 173.00 288.05 49832.65


Valve connectora 18.98.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 129.00 271.80 35062.20b 18.98.2 For 22.22 mm outer dia x 15 mm nominal dia threaded Each 126.00 320.55 40389.30c 18.98.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 173.00 342.65 59278.45


Female Threaded Elbow 90O

a 18.99.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 128.00 238.10 30476.80b 18.99.2 For 22.22 mm outer dia x 15 mm nominal dia threaded Each 163.00 319.40 52062.20c 18.99.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 134.00 329.85 44199.90



Male Threaded Elbow 90O

a 18.100.1 For 15.88 mm outer dia x 15 mm nominal dia threaded Each 129.00 250.90 32366.10b 18.100.2 For 22.22 mm outer dia x 15 mm nominal dia threaded Each 126.00 317.10 39954.60c 18.100.3 For 22.22 mm outer dia x 20 mm nominal dia threaded Each 173.00 334.50 57868.50


Capa 18.101.1 For 15.88 mm outer dia pipe Each 129.00 52.25 6740.25b 18.101.2 For 22.22 mm outer dia pipe Each 126.00 74.35 9368.10


Pipe Bridgea 18.102.1 For 15.88 mm outer dia pipe Each 112.00 248.55 27837.60b 18.102.2 For 22.22 mm outer dia pipe Each 132.00 314.75 41547.00

Total of Subhead III Internal Water supply 3832900.00

ELECTRICAL WORK SCHEDULED ITEMS

SUBHEAD-II : LT CABLE & TERMINATION

1667.7.1

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cableof 1.1KV grade of upto 35 sqmm cable on wall surface as required. (Clamped with1mm thick saddle) RM 2965.00 22.00 65230.00

1677.8.1

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cableof 1.1KV grade of upto 35 sqmm cable on cable tray as required. (Clamped with 1mmthick saddle) RM 1070.00 19.00 20330.00

Cable End Termination


168 Supply and making End termination with brass compression Gland and Al. lugs for thefollowing size of PVC insulated and PVC shielded/ XLPE Aluminium /Cu. conductorarmoured / unarmoured Power cables / wires of 1.1 KV grade as required.

a D-9.1.21 3.5C x 35 sq. mm Al. Ar. cable Nos 4.00 245.00 980.00b D-9.1.20 3.5C x 25 sq. mm Al. Ar. cable Nos 72.00 210.00 15120.00c D-9.1.33 4C x 16 sq. mm Al. Ar. cable Nos 36.00 208.00 7488.00d D-9.1.32 4C x 10 sq. mm Al. Ar. cable Nos 20.00 163.00

169D-14.3

Filling with available excavated earth (excluding rocks) in trenches, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer, by ramming & watering, lead upto 50 meters. Cu.M. 44.00 100.00 4400.00

170D-14.6

Excavation of Cable trenches in hard rock not exceeding, 1.5 meters in width, and liftupto 1.5 meters, including getting out of excavated soil, and disposal of soil as directdwithin a lead of 50 meters. Cu.M. 44.00 477.00 20988.00

171 Providing, Laying and fixing following dia RCC pipe NP2 class (light duty) in groundcomplete with RCC collars, jointing with cement, mortar 1:2 (1 Cement : 2 fine sand)including trenching (75 cm deep) and refeling etc as required

a D-14.14.1 100 mm dia RM 2735.00 313.00 856055.00b D-14.14.2 150 mm dia RM 2665.00 357.00 951405.00c D-14.14.3 250 mm dia RM 2675.00 424.00 1134200.00

TOTAL OF SUBHEAD-II : LT CABLE & TERMINATION 3076196.00SUBHEAD-III : CABLE TRAY

172Civil-10.2

Structural Steel work revited, bolted or welded in built up sections, trusses and framedwork, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete Kg 975.00 73.65 71808.75TOTAL OF SUBHEAD-III : CABLE TRAY 71808.75SUBHEAD-IV : DISTRIBUTION BOARD

173 Supply and fixing of following way, 1 pole / 3 pole & neutral, sheet steel, MCBdistribution board 240/415 volts, on surface / recess complete with tinned Cu. Bus bar,neutral bus bar, earth bus bar, DIN bar, detachable gland plate, interconnection,phosphatised & powder painted including earthing etc. as required. ( But without MCB/RCCB/ Isolator)

A Distribution Board (1-phase - 2+12 Way SPN)a D-2.3.8 12 Way SPN Double door Nos 10.00 1185.00 11850.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 80.00 146.00 11680.00c D-2.10.3 40 A DP MCB Nos 10.00 985.00 9850.00


d D-2.14.2 40 A, upto 300mA DP, RCCB Nos 10.00 1510.00 15100.00e D-2.11 Blanking Plate Nos 20.00 6.00 120.00

B Distribution Board (1-phase - 2+8 Way SPN)a D-2.3.7 8 Way SPN Double door Nos 28.00 954.00 26712.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 168.00 146.00 24528.00c D-2.10.3 32 A DP MCB Nos 28.00 412.00 11536.00d D-2.14.1 25 A, upto 300mA DP, RCCB Nos 28.00 1427.00 39956.00

C Distribution Board (3-phase - 8 Way TPN)a D-2.4.6 8 Way TPN ,(4+24), Double door, Horizontal type Nos 53.00 2795.00 148135.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 1272.00 146.00 185712.00c D-2.14.3 63 A DP RCCB upto 300mA Nos 141.00 1974.00 278334.00d D-2.14.2 40 A DP RCCB upto 300mA Nos 18.00 1510.00 27180.00

D Distribution Board (3-phase - 6 Way TPN)a D-2.4.5 6 Way TPN ,(4+18), ) Double door, Horizontal type Nos 50.00 2265.00 113250.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 900.00 146.00 131400.00c D-2.14.2 40 A DP RCCB upto 300mA Nos 150.00 1510.00 226500.00

174 Supplying and fixing of following ways surface/recessed mounting vertical type, 415volts, TPN MCB distribution boars of sheet steel, dust protected, duly power painted,inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar formounting MCB's (but without MCB and incomer) as required.

A Distribution Board (3-phase - 4 Way VTPN)a D-2.5.4 4 Way TPN ,(4+12), ) Double door, Vertical type Nos 14.00 4258.00 59612.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 168.00 146.00 24528.00

B Distribution Board (3-phase - 8 Way VTPN)a D-2.5.5 8 Way TPN ,(4+24), ) Double door, Vertical type Nos 4.00 5364.00 21456.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 72.00 146.00 10512.00c D-2.10.4 6/32 A S/F"C" series ,TP MCB (Three pole) Nos 8.00 610.00 4880.00

175 Supplying and fixing of following ways surface/recessed mounting vertical type, 415volts, TPN MCB distribution boars of sheet steel, dust protected, duly power painted,inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar formounting MCB's with provision of 100 amps TP 16 KA MCCB as incomer,interconnection between incomer MCCB and bus bars (but without MCB/MCCB) asrequired.


a D-2.6.2 8 Way TP Nos 13.00 5260.00 68380.00b D-2.10.1 6/32 A S/F"C" series ,SP MCB (Single pole) Nos 234.00 146.00 34164.00c D-2.10.4 6/32 A S/F"C" series ,TP MCB (Three pole) Nos 26.00 610.00 15860.00d D-2.2.1 S/F TPN MCCB (100 AMPS, 16KA) Nos 13.00 3032.00 39416.00

TOTAL OF SUBHEAD-IV : DISTRIBUTION BOARD 1540651.00SUBHEAD-V : SUBMAIN WIRING

176 Supplying and laying of the following sizes of 1100 V Grade PVC insulated FRLScopper conductor wire with PVC conduit of required size complete with terminations.

a D-1.14.4 2 X 6 sq.mm + 1 X 6 sq.mm earth wire RM 430.00 216.00 92880.00b D-1.14.5 2 X 10sq.mm + 1 X 10 sq.mm earth wire RM 140.00 320.00 44800.00c D-1.14.6 2 X 16sq.mm + 1 X 16 sq.mm earth wire RM 0.00 441.00 0.00d D-1.14.9 4 X 6 sq.mm + 2 X 6 sq.mm earth wire RM 160.00 371.00 59360.00e D-1.14.10 4 X 10 sq.mm + 2 X 10 sq.mm earth wire RM 1090.00 575.00 626750.00f D-1.14.11 4 X 16 sq.mm + 2 X 16 sq.mm earth wire RM 420.00 803.00 337260.00

TOTAL OF SUBHEAD-V : SUBMAIN WIRING 1161050.00SUBHEAD-VI : POINT WIRING

177

PVC

Wiring for light / ceiling fan/ Ex. Fan/ Call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed PVC conduit, withmodular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required.

D-1.10.3 Group-C Nos 6040.00 727.00 4391080.00

178

5A PVC

Wiring for 5A Power Plug with 1.5 sq.mm FRLS PVC insulated copper conductor singlecore cable in surface / recessed PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copperconductor single core cable etc as required. (Independent)

a D-1.10.3 Wiring for light point- Gr. C Nos 610.00 727.00 443470.00b D-1.24.4 5 pin 5/6 amp socket outlet Nos 610.00 101.00 61610.00c D-1.28.1 2 Module Metel Box with base and cover plate Nos 610.00 73.00 44530.00

179

5A TwinPVC

Wiring for 5A TWIN Power Plug with 2.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed PVC conduit, with modular switch, modularplate, suitable GI box and earthing the point with 2.5 sq.mm. FRLS PVC insulatedcopper conductor single core cable etc as required.

a D-1.14.2 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire RM 7900.00 140.00 1106000.00b D-1.14.7 4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire RM 2660.00 214.00 569240.00c D-1.17.1 1 x 1.5 sq. mm earth wire in existing conduit RM 7900.00 21.00 165900.00


d D-1.17.2 2 x 1.5 sq. mm earth wire in existing conduit RM 2660.00 35.00 93100.00e D-1.24.1 6A Switch RM 481.00 77.00 37037.00f D-1.24.4 5 pin 6A socket outlet Nos 962.00 101.00 97162.00g D-1.27.4 6 Module Metel Box with base and cover plate Nos 481.00 241.00 115921.00h D-1.26 Supplying and fixing modular blanking plate on existing modular plate & switcg box

excluding modular plate required Nos 481.00 23.00 11063.00

180

PVC

Wiring for Ceiling fan point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed PVC conduit, with modular switch, modularplate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulatedcopper conductor single core cable etc as required.

a D-1.8.3 Wiring for Ceiling fan point controlled- Gr. C Nos 1819.00 727.00 1322413.00b D-1.25 Stepped type electronic regulator. Nos 1819.00 362.00 658478.00c D-1.28.1 2 Module Metel Box with base and cover plate Nos 1819.00 73.00 132787.00

181

Civil-10.18

Providing & Fixing of Circular / hexagonal MS sheet box for ceiling fan clamp ofinternal dia. 140 mm, 73 mm height , top lid of 1.5 mm thick of MS sheet with its topsurface hacked for proper bonding, top lid shall be screwed to the MS sheet box bymens of 3.3 mm dia. round headed screws one lock at the corners. Clamps shall bemade of 12 mm dia. MS bar bent to shape as per standard drawing Nos. 1819.00 138.00 251022.00

182 Wiring for light/Power Plug with 2x4 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed PVC conduit alongwith 1 No 4 sq.mm FRLSPVC insulated copper conductor single core cable for loop earthing as required. (forPower socket & AC socket)

a D-1.12 Power plug wiring in PVC conduit(2X4 + 1x4 sq.mm) RM 16520.00 242.00 3997840.00b D-1.13 Power plug wiring in PVC conduit(4X4 + 2x4 sq.mm) RM 4400.00 375.00 1650000.00c D-1.24.3 16/20 A Switch Nos 702.00 114.00 80028.00d D-1.24.5 6 pin 15/16 amp socket outlet Nos 702.00 163.00 114426.00e D-1.27.2 3 Module Metel Box with base and cover plate Nos 702.00 172.00 120744.00

183

D-2.18

Supplying & Fixing 20 Amps 240 volts, SPN Industrial type, socket outlet, with 2 poleand earth, metal enclosed plug topalongwith 20 A `C' series, SP MCB, in sheet steelenclosure, on surface or in recess, with chained metal cover for the socket outlet andcomplete with connection, testing & commissioning etc. as required.

Nos 217.00 1869.00 405573.00

184

PVC

Wiring for Exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed PVC conduit, with modular switch, modularplate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulatedcopper conductor single core cable etc as required.


a D-1.10.3 Group-C Nos 117.00 727.00 85059.00b D-1.33 5 amp ceiling rose for Ex. Fan Nos 117.00 42.00 4914.00

185 Wiring for light/Power Plug with 2x6sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed PVC Conduit alongwith 1 No 6 sq.mm FRLSPVC insulated copper conductor single core cable for loop earthing as required (ForInd.Socket).

D-1.14.4 2X6Sqmm + 1x6 sq.mm earth wire RM 450.00 320.00 144000.00D-1.14.9 4X6 Sqmm+ 2x6 sq.mm earth wire RM 120.00 371.00 44520.00

186

D-2.18

Supplying & Fixing 20 Amps 240 volts, SPN Industrial type, socket outlet, with 2 poleand earth, metal enclosed plug topalongwith 20 A `C' series, SP MCB, in sheet steelenclosure, on surface or in recess, with chained metal cover for the socket outlet andcomplete with connection, testing & commissioning etc. as required.

Nos 233.00 1869.00 435477.00

Circuit/ submain wiring in PVC conduit187 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC

insulated copper conductor, single core cable in surfaec/ recessed PVC conduit asrequired

a D-1.14.1 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire RM 149140.00 116.00 17300240.00b D-1.17.3 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire in existing conduit RM 57110.00 52.00 2969720.00

188D-1.53

Supplying and drawing of UTP 4 pair CAT-6 LAN Cable in the existing surface/recessed steel/ PVC conduit as required.(for Telephone in Institutional building, Data,PA and FA) RM 28360.00 31.00 879160.00

D-1.24.6 Modular telephone socket outlet with RJ11 jack .(for Residntial & Ancillairy Buildings) Nos 3.00 92.00 276.00D-1.27.1 2 Module Metel Box with base and cover plate Nos 965.00 159.00 153435.00

189 Suppling and fixing of following size of PVC conduit along with accessories in surfacereccess including cutting the wall and making good the same in case of reccesedconduit as conduit as required

a D-1.21.1 20 mm RM 27670.00 64.00 1770880.00b D-1.21.2 25 mm RM 15370.00 72.00 1106640.00

TOTAL OF SUBHEAD-VI : POINT WIRING 40763745.00SUBHEAD-VII : LIGHT FIXTURES

190

1.41

Installation, Testing & commissioning of pre-wired, fluorescent fitting/ compactflourescent fitting of all types, complete with all accessories and tube etc. directly onceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copperconductor. single core cable and earthing etc. as required. Each 5608.00 82.00 459856.00


191

1.45

Installation, Testing & commissioning of ceiling fan including wiring the down rods ofstandard length (upto 30cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor.single core cable including providing and fixing of phenolic laminated sheet cover onthe fan box etc. as required. Each 1854.00 112.00 207648.00

1921.50 Installation, of exhaust fan in the existing opening, including making good the damage,

connection, Testing & commissioning etc. as required. Upto 450mm sweep. Each 85.00 189.00 16065.00

193

D-12.34

Supplying and fixing of 32mm dia x 2 meters long G.I pipe (medium class) bracket formounting of fluorescent/HPMV/HPSV street light fitting on pole/wall including bendingthe pipe to the required shame 2 nos 40 mm x 3 mm flat iron clamps with nuts boltsand washer, painting the flat iron with primer and finish paint etc. as required.

Each 4.00 749.00 2996.00TOTAL OF SUBHEAD-VII : LIGHT FIXTURES 686565.00SUBHEAD-VIII : LIGHTNING PROTECTION

194D-6.2

Providing and fixing of lightning conductor final,made of 25mm dia 300mm long,G.Itube,having, Single prong at top, with 85mm dia 6mm thick G.I base plate includingholes etc. complete as required. Nos 8.00 352.00 2816.00

195D-6.4

Jointing Copper /G.I tape (with another copper/G.I tape, base of the finial or any othermetallic object) by riveting/nut bolting/sweating and soldering etc as required

Nos 1179.50 68.00 80206.00

196 D-6.7 Providing and fixing G.I tape 20mm X 3mm thick on parapet or surface of wall forlightning conductor complete as required.(for horizontal run) RM 3450.00 64.00 220800.00

197 D-6.8 Providing and fixing G.I tape 20mm X 3mm thick on parapet or surface of wall forlightning conductor complete as required.(for Vertical run) RM 740.00 91.00 67340.00

198D-6.12

Providing and fixing testing joint made of 20mm X 3mm thick G.I strip,125mm long,with4nos of G.I bolts,nuts,check nuts and spring washers etc complete as required.

Nos 53.00 69.00 3657.00

199 D-6.14 Providing and laying G.I tape 32mm X 6mm form earth electrode directly in ground asrequired RM 530.00 135.00 71550.00

200D-5.2

Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, andproviding masonary enclosure with cover plate having locking arrangement andwatering pipe etc with charcoal or coke and salt as rerquired. Set 53.00 3753.00 198909.00


TOTAL OF SUBHEAD-VIII : LIGHTNING PROTECTION 645278.00SUBHEAD-IX : EARTHINGG.I. earth plate electrode

201

D-5.4

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,and providing masonary enclosure with cover plate having locking arrangement andwatering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Set 20.00 4367.00 87340.00

Cu.earth plate electrode202

D-5.6

Earthing with Cu. earth plate 600 mm X 600 mm X 3 mm thick including accessories,and providing masonary enclosure with cover plate having locking arrangement andwatering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Set 12.00 8939.00 107268.00

203 D-5.15 Providing & fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.as required. RM 480.00 133.00 63840.00

Copper Tape204 D-5.14 Providing & fixing 25 mm X 5 mm copper strip on surface or in recess for connection

etc. as required RM 40.00 812.00 32480.00TOTAL OF SUBHEAD-IX : EARTHING 290928.00SUBHEAD-X: POWER BACKUP & LIGHTING CONTROL SYSTEM

205

D-15.1

Supplying. Installation, testing and commissioning of Passive Infrared (PIR) technologybased occupancy sensor having high performance, non regulating programmable, type,suitable for connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5mdiameter coverage area along with necessary fixing arrangements i/c programming atsite etc. complete as required. Each 99.00 3157.00 312543.00

206

D-15.2

Supplying. Installation, testing and commissioning of Passive Infrared (PIR) technologybased occupancy sensor with day light dimming (light level shall be regulated as peravailability of natural day light in an area along with occupancy detection) having highperformance, regulating programmable, type, suitable for connected load upto 10Amp,for mounting height up to 2.8 mtr. For 5m diameter coverage area along withnecessary fixing arrangements i/c programming at site etc. complete as required.

Each 345.00 4431.00 1528695.00


207

D-15.3

Supplying. Installation, testing and commissioning of Microwave technology basedoccupancy sensor having high performance, non regulating programmable, type,suitable for connected load upto 10Amp, for mounting height up to 2.6 mtr. and for 5mX 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. Each 127.00 6064.00 770128.00TOTAL OF SUBHEAD-X: POWER BACKUP & LIGHTING CONTROL SYSTEM

2611366.00SUBHEAD XIII : CCTV SYSTEM

208D-1.19

Supply and drawing co-axial TV cable RG-6 grade, 0.7mm solid copper conductor PEinsulated, shielded with fine tinned copper braid and protected with PVC sheath in theexisting conduit as required. RM 1080.00 23.00 24840.00

209 D-1.17.3 Supply and Installation of 3 x 1.5sqmm flexible power cable for camera with allaccessories in existing conduit RM 650.00 52.00 33800.00TOTAL OF SUBHEAD XIII : CCTV SYSTEM 58640.00SUBHEAD XIV : SAFETY EQUIPMENTS

210D- 2.21

Providing and fixing M.V. danger notice plate of 200mm x 150mm, made of mild steel,at least 2mm thick, and vitreous enameled white on both sides, and with inscription insingle red colour on front side as required. Each 10.00 133.00 1330.00TOTAL OF SUBHEAD XIV : SAFETY EQUIPMENTS 1330.00

In Figures (Rs.) In Words (Rs.)CIVIL WORK NON SCHEDULED ITEMS

EARTH WORK

211 NSI-1 Diluting and injecting chemical emulsion for preconstructional anti-termite treatment and creating acontinous chemical barrier under all round the column pits,wall trenches, basement excavation, top surface plinth filling,junction of wall and floor, along the external perimeter of thebuilding, expansion joints over the top surface ofconsolidated earth on which apron is to be laid, sorroundingof pipes and conduits etc. complete as per specifications.(plinth are of the building at ground floor only shall bemeasured in sqm for payment )

With chloropyriphos emulsifiable concentrates of 20 % with1 % concentration.

sqm 12,524.00

TOTAL OF EARTH WORK

CONCRETE WORK

212 NSI-2 Providing and laying light weight foam concrete of density450kg/cum in sunken portion at all levels as per direction ofEngineer-in-charge

Cum 446.00

TOTAL OF CONCRETE WORK

WOOD WORK

Bill of Quantity for Non Schedule Items

Construction Of National Institute Of Technology Meghalya at SohraPackage-I (Acdemic , Admin, Lecture hall, Library, Work Shop, ESS, & Check Dam)

S.No. ITEM CODE No.

Description of Items Unit Quantity Quoted Rates Amount (In Rs.)

In Figures (Rs.) In Words (Rs.)S.No. ITEM CODE No.


213 NSI-3 Providing and fixing of fully insulated 55 mm thick woodenfire / smoke check door shutter using 31mm thick FRinsulation with internal facia of 9mm thick calcium silicateboard having density not less then 950 Kg/cum on bothsides and faced with 4mm thick commercial ply facingincluding 15X55 mm size hardwood beading with fire andsmoke seal of size 10 X4 mm fitted along vertical andhorizontal edges of the shutter .The complete door systemshould be capable to achieve Two hour fire rating inaccordance with BS:476 Part 20and IS:3614 part II.Rate toinclude 150x75mm Hardwood door frame duly embeddedwith Promseal Intumscent Smoke Strip as permanufacturer's specification all complete . The door shuttershall also have a vision panel 6mm thk, 200mm x 300mm /300mm x 300mm fire rated glass ( to be paid saperately),surrounded with fire proof treated teakwood beading, allaround complete in all respects as per manufacturesspecifications and direction of the Engineer-In-Charge.

Sqm 104.00

214 NSI-4 Providing & Fixing following fire rated fittings as permanufactures specifications and direction of the Engineer-In-Charge.

a Door Locks Nos 30.00

b Glass Wired Vision Panel of size 200mmx300mm Nos 30.00

c Door Closer Nos 30.00

d SS door Handles 150 mm Nos 60.00

e SS tower Bolts 300 mm Nos 30.00



TOTAL OF WOOD WORK

FLOORING WORK

215 NSI-5 Granite stone flooring with 18mm thick stone (sample ofgranite shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with grey cement slurryincluding rubbing and polishing complete with :

Sqm 10,957.00

216 NSI-6 Granite work gang saw cut (polished and machine cut) ofthickness 18mm for wall lining,skirting and dado (veneerwork) in cement mortar 1:3 (1 cement : 3 coarse sand)including pointing with white cement mortar 1:2 (1 whitecement : 2 marble dust) with an admixture of pigment tomatch the marble shade: (To be secured to the backing bymeans of cramps, which shall be paid for separately).

Sqm 8,163.00

217 NSI-7 Providing Flamming on granite stone slabs in floors, landingand treads complete including required material for thepurpose as per direction of Engineer-in-charge.

Sqm 1,698.00

218 NSI-8 P&F flexible PVC sheet flooring in 2.0mm thickness in thesize of 2mx20mtr use area classification 23/34/43. Resultsfrom independent testing demonstrate that productinherently inhibits the growth of microbial strain MRSA. Itshall be homogeneous single layer and monolayer inconstruction, and shall be manufactured by calendering andpresssing, to ensure a dense & smooth. The flooring shallincorporate a specially formulated polyurethenereinforcement, to give life long polish free maintenance.Homogeneous PVC Vinyl flooring(imported) with total weight3250 g/m2 polyurethane reinforced (PUR) ,Abrasion groupP:≤0.15mm,residual identification approx..01 mm,castorwheel test qualified,,dimensional stablity EN-434,staticelectrical charge < 2kv,impact sound reduction approx ,goodresistance of scratch,slip, chemical and firedoesn't favour ingrowth of fungi & bacteria ,BRE certified. class 'A' ( PolyflorMystique PUR) / Equivalent

sqm 489.00



219 NSI-9 Providing of 3 mm average thick layer of cementitious saltsmoothning compound of Ardex CL-11 or equivalent asrecommended by the Vinyl sheet flooring manufacturer overand including a priming compound of Ardex P-51 orequivalent as recommended by the Vinyl sheet flooringmanufacturera on concrete surface to provide a smooth &homogenous surface for laying of vinyl sheet flooringcomplete to the entire satisfaction of Engineer-in-charge.

sqm 6,533.00

220 NSI-10 P&F flexible PVC sheet wall cladding in 1.25 mm thicknessin the size of 1.83x30mtr with polyurethane surfacetreatment,with the testing results of inhibits the growth ofMRSA in the walls with the clean room certificatiom.HomogeneousPVC Vinyl wall covering (imported) with totalweight 2120 g/m2 polyurethene sheild,dimentional stablity≤0.40%,wetroom test qualified,good resistance to chemical& fire,anti fungi & bacterial growth,class A in clean room testand available in various colour shade. ( polyflor polyclad PU)/ Equivalent

sqm 300.00

221 NSI-11 Providing and Fixing carpet (tip shared loop pattern/patterncut pile or pattern scrol) make of yarn content avalar/Aquaapproved SD nylon with puralex/continuous filament 6.6nylon, yarn weight 26 to 36 oz/sq yd, with primary backing ofmaster line/polypropylene and secondary backing of wovanpolypropulene with post consumer recycled content. 1/8,1/10 and 1/12 guage, 7.3 to 14 stotches/inch, the carpetshall be flame resistant as per DOC FF-I-70 smoke densityshould be less than 450 (ASM E-662) soil resistant as eprcommercial anti soil protection and carpet is CRI green labelplus certified # GLP7078 the carpet shall be pasted withappropriate adhesive suitable for pasting on existing floor,complete job as per manufacturer's specifications(Equivalent to Aqua Hospitality/Equavalent)

sqm 5,965.00

222 NSI-12 Providing and fixing cheera stone block in flooring of size300x150x100mm over 20 mm (average) thick base ofcement mortar 1:5 (1 cement : 5 coarse sand) with joints 3mm thick side buttered with cement mortar 1:2 (1 cement : 2stone dust) admixed the pigment to match the shade andpointing with same mortar complete as per the direction ofEngineer in cherge

sqm 500.00



TOTAL OF FLOORING WORK

ROOFING WORK

223 NSI-13 Providing & Fixing of Mineral Fibre Suspended CeilingSystem with (Tegular) EDGE TILES WITH 24mm ExposedGRID. The tiles should have Humidity Resistance (RH) of99%, Minimum NRC 0.5, Light Reflectance ≥83%, ThermalConductivity k = 0.052 - 0.057 w/m K, Fire Performance UKClass 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x600 x 16mm with Bio Block coating on the face of the tile,suitable for Green Building application, with Recycledcontent of 38 - 41%. The tile shall be laid on with 24 mmwide T - section flanges having rotary stitching on all Tsections i.e. the Main Runner, 1200 mm & 600 mm CrossTees with a web height of 38mm and a load carryingcapacity of 15.34Kgs/M2. The T Sections have aGalvanizing of 90 grams per M2 . The Tile & Grid systemused together should carry a 15 year warranty.Installation tocomprise main runner spaced at 1200mm centres securelyfixed to the structural soffit using suspension system(specifications below) at 1200mm maximum centre. TheFirst/Last suspension system at the end of each main runnershould not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlockedbetween main runners at 600mm centre to form 1200 x 600mm module. Cut cross tees longer than 600mm requireindependent support. 600 x 600mm module to be formed byfitting 600mm long flush fitting cross tees centrally betweenthe 1200 mm cross tees.Perimeter trim to be wall angles ofsize 3000x19x19mm, secured to walls at 450 mm maximumcentres

SUSPENSION SYSTEM accessories will be approved makeconsisting of M6 Anchor Fasteners or equivalent withVertical Hangers made of Galvanised steel of size 26 x 26 x25 x 1.2mm with a Galvanised Thickness of 80gsm, A preStraightened Hanger wire of dia – 2.68 mm of 1.83 mlength., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick,galvanised spring steel for 2.68 mm with a minimum pullstrength of 110 kg. The adjustable clip also consists of a 3.5mm aquiline wire to be used with the main runner. The workincluding, , cutting / making, opening for services likediffusers, grills, light fittings, fixtures, smoke detectors etcwherever, required.

Sqm 10,788.00



224 NSI-14 Providing & Fixing of in metal ceiling System consisting of600x600mm clip in tiles of pre coated Aluminium in 0.7 mmthickness with bevel edge in white colour with standardperforation of 1.5mm dia. The back of the tile should haveblack acoustical fleece. The NRC should be 0.70 andsuitable for Green Building application, with Recycledcontent of 50%. Installation: To comprise 3000mm long‘C’ channels spaced at 1200mm centres securely fixed tothe structural soffit by support clamp & approved hangers.The last hanger at the end of each C channel should not begreater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels.4000mm Dp-12 Main carriers (spring tee bars) shall bespaced at 1200mm centres in a direction perpendicular tothe C-channels and shall be secured at every intersectionwith C channel using a dp-12 hanger. Use Dp-12 connectorto splice two pieces of Dp-12 main carriers. Tiles should beclipped in between two Dp-12 carriers (spring tee bars) frombelow. Perimeter trims to be of Armstrong wall angles ofwhite colour secured to walls at 450mm maximum centres.Cut tiles to be secured to the wall angles using a springclamp

Sqm 2,262.00

225 NSI-15 Providing and fixing wooden false ceiling consisting wellseasoned hard wood sections, treated with preservatives,minimum 50x50 mm, at suitable horizontal/vertical spacingnot exceeding 600 mm c/c.applying finished with 1 mm thicklaminate of same or combination shades of approved brandover 12 mm thick BWR grade ply with grooves / pattern allcomplete as per drawings and direction of Engineer-in-charge, including, cutting / making, opening for services likediffusers, grills, light fittings, fixtures, smoke detectors etcwherever, required.

Sqm 531.00



226 NSI-16 Providing and fixing at all heights false ceiling of 4mm thickphenol bonded Bamboo Mat board (595 mm X 595 mm)conforming to IS: 13958-1994 including providing and fixingof frame work made of GI angle 25mm x 25mm x 0.4 mmthick all around suitably fixed to wall with the help of dashfastner and hanger frame(600mm x 600mm c/c) made GISlotted Tee having powder coating on bottom side (30mm x25mm x 0.3 mm thick for main member & 25mm x 25mm x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and alsoincluding the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channelssuitably fixed all complete as per specifications and directionof the Engineer-in-charge as a complete job.

Sqm 4,315.00

227 NSI-17 Providing and fixing at all heights wall paneling of 12mmthick phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frameworkmade of 50mm X 50mm hardwood plugs including cuttingbrick work and fixing in cement mortar and making goodwalls etc. and also providing and fixing wooden mouldedcorner beading of triangular shape to the junction of paneling etc. with iron screws as a complete job.

Sqm 2,158.00

228 NSI-18 Extra for using 4 mm veneer in place of laminate on woodenfalse ceiling including additional framing as per direction ofEngineer-in-charge.

sqm 931.00

229 NSI-19 Supply and fixing of Aluminium Standing Seam 65/400“SELF SUPPORTED” SECRET FIX STANDING ROOFINGSYSTEM IN 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roof-construction shall comprise from bottom totop:Steel Liner – 32-35/250 Bare Galvalume steel liner sheet,0.5 mm tct 1000 mm total cover width x 32-35mm deep ribsspanning up to 1500mm centres (multiple spans).

Vapour Control Layer – A single layer of double-sidedaluminium foil/ Polyethylene Film.Insulation - A layer of Rockwool insulation of 100mmthickness minimum 48kg/m3 density with thermalconductivity of K=0.04 W/mk at 25 degree Celsius. Fireclassification with test procedures to BS 476: Parts 6 & 7.



Top layer – Aluminium Standing Seam 65/400 straightprofile sheeting manufactured from aluminium self supportedstanding seam roof system manufactured from aluminiumalloy AA 3004 (AlMn1Mg1) as specified in BS EN 1396:2007 minimum material thickness of 0.9 mm andFluorocarbon PVDF finish on the exposed surface. Thesystem includes all the Accessories, Fasteners and Top-hat.

The profiles sheets to be used must be long length sheetsand should not be with any lapping joints. To achieve longlength sheets dedicated roll forming machines to be used

The roofing system shall be certified with a British Board ofAgreement Certificate No 98/3481 plus the Institute ofBautechnic Zulassungbeschield N R -14.1 .181 Theapproved roofing system must also be certified by theFactory Mutual FM Research Corporation of the USA andclassified as a CLASS 1 Panel Roof. The manufacturer mustproduce all 3 valid certifications.

Sqm 18,964.00

230 NSI-20 Flashings as per the specifications above and 0.9mm thickAluminium PVDF Finish .

RM 4,500.00

TOTAL OF ROOFING WORK

231 NSI-21 Slate tile work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) ans cement slurry @ 3.3 Kg/Sqm including pointing in white cement complete

Sqm 2,543.00

232 NSI-22 Bhuj block tile (stone look) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) ans cement slurry @ 3.3 Kg/Sqm including pointing in white cement complete

Sqm 2,543.00

233 NSI-23 Providing and fixing cheera stone tile of size 150x300mm 15mm thickness for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) ans cement slurry @ 3.3 Kg/Sqm including pointing in white cement complete as per the direction of Engineer in cherge

Sqm 5,085.00

FINISHING WORK



234 NSI-24 Providing & Fixing Chicken Mesh of aperature 25mm with 22 SWG Wire on the junction of R.C.C work & brick work under the plaster by U nail. Complete as per direction of Engineer in charge.

Sqm 24,740.00

235 NSI-25 Ceiling :- Providing and fixing of acoustical ceiling with perforated Tile Square edge 8mm for Ceiling of size 595x595/1195x 8mm is to be installed on framework of T-24 GI grid. This system has NRC upto 0.80 with humidity resistance of 99% RH and light reflectance upto 74% with Green Performance certified. Magnesia perforated Tile having 6mm dia perforation with acoustical fleece on back side of Tile and it meets the stringent fire test required having Class A1 rating , with complete framework as per Installation details given.

Installation Details:- acoustical ceiling with perforated Tile Black Square edge 8mm for Ceiling Tile is to be layed on frame work of T-24 grid pre-coated GI angle size 24x24x0.4 mm thick fixed to the brick wall / partition at the perimeter of ceiling with Nylon Sleeves and drywall screws, Then suspended main GI ‘T’ section (bottom precoated-white) with polyester coating of 25 microns dry film thickness. Main T-section size 24x38x0.3 mm thick and 3600 mm long from soffit in one direction with the help of metal rawl plug, cleat, leveler, perimeter & wall spring clip & G I Rod 4 mm diameter with galvanized spring steel level clip 1200 mm centres from soffit. G I cross T section (bottom precoated-white) size 24x25x0.3 mm and 1200mm & 600mm long is insert fixed into the slots provided as interlock in main ‘T’ at 600 mm centres to form 600x600mm grid size for a tile size of 595x595 mm. All accessories such as framework accessories cleat, suspenders, levelers, clips etc, shall be supplied and installed in accordance with manufacturer recommendation.

Sqm 3,225.00



236 NSI-26 Wall (Dado Height) :- Providing and fixing acoustical wooden Grooves panel having system NRC upto 0.75 with lineal perforations.The panels shall be fire resistant (FR) grade with melamine laminate panels 2430mm x 128mm x16mm with 2mm slats at 16/32 mm pitch, Toungue and Groove edges for seamless mounting having density of 750 kg/m3 . The back of the panels are perforated with 10mm diameter circular holes with acoustical fleece of 0.2mm for providing Sound absorption via the acoustic impedance method.Panel is fixed by using CC225 GI Framework spaced at 600mm centers & steel keel 18mm of aluminum/GI framework spaced at 400mm centers with suitable brackets and the system is backlined with polyster fibre of 25mm with surface density of 1000 gsm and alongwith all accessaries and direction of Engineer in charge.

Sqm 1,559.00

237 NSI-27 Wall (Above Dado Height) :- Providing and Fixing acoustical Panel of size 2400/1200x600x25 mm of 400kg/m3 density with Spline H. Which will comprise to NRC upto 0.9. Earcons Celia Stuff Panel is to be installed on GI SC 48 framework.The system shall meet the fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index with complete GI frame work as per Installation details given.

Installation:- The acoustical Panel is to be fixed on GI floor and ceiling channel & stud of G I section of prime quality cold rolled steel as per IS 513 hot dipped galvanized 120 gsm as per BS 2989 and zinc coating as per IS 277. The GI SC-48 wall channel and FC-50 floor and ceiling channel are to be fixed with nylon plastic sleeves and wooden screws to from the proper framework . The extra channel must be used at openings and junctions as required.The Polyester Fiber of 50mm with 1000 gsm surface density should be inserted in cavity of the framework for better insulation.The stud will come at every 600 centre to centre & Spline H to be fixed perpendicular to the SC-48 channels with steel screws for fixing Acoustic Panel in plumb, line & level. As per the specification and direction of the Engineer incharge.

Sqm 1,650.00



238 NSI-28 Designer cement tiles ( Ultra tiles/ Eurocon tiles orequivalent) work in cladding / dado/skirting (upto 2 m height)over 12 mm thick bed of cement mortar 1:3 (1 cement :3coarse sand) and jointed with grey cement slurry @ 3.3kg/sum including pointing in white cement mixed withpigment of matching shade complete.

Sqm 475.00

239 NSI-29 Providing and laying 15mm thick factory made plain surfaceexotic quality tile of size 200mm x 200mm of approved makeand size and design/ shape in required colour and patternlaid on cement mortar 1:3 (1 cement :3 coarse sand) andjointed with grey cement slurry @ 3.3 kg/sum includingpointing in white cement mixed with pigment of matchingshade etc. all complete as per the direction of Engineer-in-charge. (Matching make of Pavit or equivalent.

Sqm 750.00

TOTAL OF FINISHING WORK

240 NSI-30 Providing & fixing SS wire gauge of average width ofaperture 1.4 mm with wire of dia 0.63 mm for aluminiumdoors/window fixed with nessecary screw / washercomplete in all respects as per direction of Engineer-In-Charge.

sqm 3,833.00

TOTAL OF ALUMINIUM WORK

241 NSI-31 Trimming of side Check Dam by chigeling of stone and fillingof pot hols any by CC - 1:2:4 (1 Cement : 2 Course Sand : 4Grade Stone 20mm Size) to give a smooth surface as perdirection Engineer in charge.

Sqm 700.00

TOTAL OF ROAD WORK

PLUMBING WORK NON SCHEDULED ITEMS

Subhead I - Sanitary Fixtures

ALUMINIUM WORK

Road Work



242 NSI-32 Providing and fixing C.P. brass twin coat hooks fixed ontoilet door with C.P. brass screws

Each 230.00

243 NSI-33 Providing and fixing 15 mm dia C.P. Ablution health faucetwith 1.0 m long SS extension pipe with wall hook andoperating knob complete in all respects.

Each 168.00

244 NSI-34 Providing & fixing solid state, no touch operting, fullyhygienic hand drier of approved shade with blower,continuous repeat usage, time delay, summer & wintercontrol, music while drying, volume ON/OFF controlsincluding providing necessary bracket cable from drier toplug, plug top key and lock etc. complete as required.

Each 66.00

245 NSI-35 Providing & fixing C.P. brass basin Mixer Tap with aeratorcomplete as required.

Each 230.00

246 NSI-36 Providing & fixing C.P. brass sink Mixer Tap with aeratorcomplete as required.

Each 160.00

247 NSI-37 Providing & fixing in position of white vitreous china belowcounter wash basin / circular / oval with C.I. bracketspainted white, 32 mm dia C.P. brass waste, 32 mm dia C.P.cast brass bottle trap, including cutting and making goodthe walls and floors where required.The size of wash basinwill be 550x400mm.

Each 43.00

248 NSI-38 Providing & fixing C.P. brass air purifier container fixed towooden / PVC cleats with C.P.brass screws complete.

Each 244.00

249 NSI-39 Providing & fixing in position storage type Hot Water electrical horizontal Gyser with M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts)



a Capacity 15 litres Nos. 34.00

b Capacity 25 litres Nos. 50.00

NOTE:Detail of Sanitary fixture are for the information of theContractor,however model/makes of all sanitary fixturesshall be selected by Architect/Project manager and the sameshall be binding for execution.

Total of Subhead I - Sanitary Fixtures

Subhead II -Internal Drainage (Soil,waste & Fittings )

250 NSI-40 Providing and fixing, uPVC pipes 6 Kg/Cm2 (IS: 4985 )including all fittings (plain or door) e.g. bends, junction,offsets, access pieces, jointing with rubber ring/solventcement joints including required suports,cutting chase orholes in walls and floors and making good whererequired.(for soil & waste pipes, ASP pipe) as per directionof engineer incharge.

a 75 mm OD. Mtrs. 50.00

b 110 mm OD. Mtrs. 2,885.00

c 160 mm OD. Mtrs. 50.00

d 200 mm OD Mtrs. 190.00



251 NSI-41 Providing & fixing in position uPVC P"or S" trap of selfcleaning design of following sizes for the embedded areas.Making proper connection with drip-seal joints, cutting chase/ hole in floors /slabs and bringing the same in propercondition in cement concrete 1:2:4 mix complete as required. including cost of cutting and making good the walls andfloors where required.

a 110 mm inlet and 110 mm outlet Each 321.00

b 100 mm inlet and 50 mm outlet (Floor Drains only). Each 206.00

252 NSI-42 Providing and fixing pvc pipes conforming to relevent I:Sincluding all fittings, testing, cutting holes or chases andmaking good where required. (For waste connections).

a 32mm dia (8 kg/cm2) Mtr. 511.00

b 50mm dia (6 kg/cm2) Mtr. 590.00

253 NSI-43 Providing and fixing multi-floor trap fitting with maximum 3inlets 32,40 or 50 mm size fabricated from 100/150 mm diaupvc pipes and sockets,fixed to p trap with solvent joint andset in cement concrete as per standard drawing complete.

Each 32.00

254 NSI-44 Providing and fixing END CAP or cleanout plug( Ceiling orFloor) with suitable inset keys for opening, male threadedjoint with socket fixed to uPVC/SCI pipe complete in allrespects.110 mm nominal pipe size Each 243.00

255 NSI-45 Providing and fixing on wall face unplasticised PVC (workingpressure for 4 Kg/cm2) rain water pipes comforming to IS:4985 including jointing with seal ring conforming to IS : 5382leaving 10mm gap for thermal expansion. ( For-Soil/Waste/Rwp pipes)(jain pipes)

Mtr. 350.00



Total of Subhead II -Internal Drainage (Soil,waste & Fittings )

Subhead III Internal Water supply

256 NSI-46 Providing & fixing butterfly valve tested to a pressure of 15Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts,washers & painting complete as required.

a 65 mm dia No. 14.00

b 80 mm dia No. 4.00

c 100 mm dia No. 12.00

257 NSI-47 Providing and fixing in position of approved quality G.M.float valve with copper ball float and brass rods ofrequired length suitable for pressure of 10 Kg/sqcm of thefollowing sizes:50 mm dia No. 20.00

258 NSI-48 Providing and fixing G.I. pipe headers in various lengthconforming to IS:1239 heavy class including all flangedconnections as per drawing / site requirement. Supportsfrom wall, floor and ceiling etc. Including dead endflanged connection.MEDIUM CLASS.

a 65 mm dia RM 177.00

b 80 mm dia RM 153.00

c 100 mm dia RM 99.00



259 NSI-49 Providing and Fixing full way lever operated forged brassball valve of brass body with forged brass hardchromeplated steel ball tasted to a pressure not less than 15kg/sqcm with threaded / flanged joints complete with nuts,bolts, gaskets, washers etc.

a 32 mm dia Nos. 54.00

b 40 mm dia Nos. 22.00

c 50 mm dia Nos. 26.00

260 NSI-50 Providing & fixing gun C.I. non-return valve of approvedmake with union flange/screwed end,washer,nut &bolts,suitable for pressure not less than 15 kg/cm2 & fortempretur upto 85 ' C including nitril rubber insulation.



c 100 mm dia Nos. 10.00

d 150 mm dia Nos. 1.00

261 NSI-51 Providing and fixing pressure Reduce valve from 6kg/cm2 to4kg/cm2 as per IS including nuts and bolts complete in allrespects.





c 25 mm dia Nos. 2.00

d 32 mm dia Nos. 2.00

e 40 mm dia Nos. 2.00

f 50 mm dia Nos. 2.00

g 65 mm dia Nos. 2.00

262 NSI-52 Painting GI. Pipes and fittings with synthetic enamel whitepaint over a ready mixed priming coat, both of approved fornew work.(two coat +primer coat.) 100mm dia

RM 100.00

Total of Subhead III Internal Water supply

Subhead IX - Miscellaneous Items263 NSI-53 Providing and fixing M.S. puddle flanges fabricated out of 6

mm thick M.S. plate of size 200 x 200mm plus dia of pipe of750 mm long pipe pieces to R.C.C. water tanks / R.C.C.walls. The entire fitting shall be hot dipped galvanised.

a 100mm dia Nos. 62.00

b 80mm dia Nos. 35.00



c 65mm dia Nos. 45.00

d 50mm dia Nos. 68.00

e 25mm dia Nos. 25.00

Total of Subhead IX - Miscellaneous Items

Total of Civil Works of Non Schedule Items

FIRE FIGHTING WORK NON SCHEDULED ITEMS

Sub Head-A: Piping, Hydrant and Accessories System

264 NSI-54 Providing, laying, jointing and testing of following sizes ofpipes conforming to IS-1239 with all accessories like allfittings including tees, elbows, reducers, flanges, rubbergaskets, nuts bolts, washer. And fixing the pipe on floor /wall /ceiling with suitable size clamps, hangers, structuralsteel supports as per specification. And G.I. pipe sleeve tobe provided wherever the pipes are crossing the walls/floorsand sealing the sleeves as per consultants requirementsincluding cutting holes and chases in brick, R.C.C work andmaking good the same to original conditions complete in allrespects. Pipe shall be MS black as per IS-1239 heavygrade and fitting for 40 mm and below be of forged screwedfittings and above BW 'C' class fittings.

For Fire System - M.S. `C' Heavy class pipea 25 mm dia RM 121.00

b 32 mm dia RM 124.00



c 40 mm dia RM 7.00

d 50 mm dia RM 203.00

e 65 mm dia RM 7.00

f 80 mm dia RM 7.00

g 100 mm dia RM 6.00

h 150 mm dia RM 805.00

265 NSI-55 Providing two coats of synthetic enamel paint of approvedshade over a coat of primer. Including painting of legendsboth direction arrow as per the approval of the architects /consultants.

a 25 mm dia RM 121.00

b 32 mm dia RM 124.00

c 40 mm dia RM 7.00

d 50 mm dia RM 203.00

e 65 mm dia RM 7.00



f 80 mm dia RM 7.00

g 100 mm dia RM 7.00

h 150 mm dia RM 805.00

266 NSI-56 Providing, laying, jointing and testing in trenches thefollowing sizes of M.S. class `C' (heavy class) pipesconforming to IS:1239 with accessories like fittings includingtees, elbows, reducers, flanges, rubber gaskets, G.I. nuts,bolts and washers and providing 150mm thick fine sandlayer all around the pipe, including excavation in all kind ofsoil/ hard rock, refilling, ramming and removing theexcavated surplus material and making good the samecomplete as required.and providing anti corrosive treatment(coating and wrapping) with 4 mm thick anti corresive tapeas per IS :10221 complete as required. (for external works)

a 80 mm dia RM 7.00

b 150 mm dia RM 7.00

267 NSI-57 Providing and fixing Orifice plate made out of 8mm thickstainless plate for pipe to reduce pressure upto 3.5 kg/sqcmcomplete in all respects150 mm dia Nos. 73.00

268 NSI-58 Providing and fixing gun metal ball valve suitable forpressure 15 Kg/Cm2 and confirming to IS: 778 of thefollowing size including providing necessary union /flange.



25 mm dia Nos. 73.00

269 NSI-59 Providing & fixing of butterfly valve suitable for pressure 15Kg/Sqcm. with flanges, nut bolts & gaskets completerequired.150 mm dia Nos. 20.00

270 NSI-60 Providing & fixing cast iron Slim seal dual type non-returnvalves (PN1.6) complete with matching flanges, rubberinsertion, nuts, bolts and washer complete as required.etc.of following sizes.150 mm dia Nos. 20.00

271 NSI-61 Providing & fixing Air Cushion tank (Air - vessel) 250 mmdia x 1.0 M high with dished top made of minimum 6 mmthick M.S Sheet pipe/ plate complete with 25 mm dia brass .Air Valve (Ball type) 25 mm dia stopcock. Nipple tees.Elbows and all accessories as required including fixingbrackets.

Nos. 10.00

272

NSI-62 Providing & fixing double flanged flexicon rubber expansionjoint with unit control of standard length as per maufacturersspecs. Tested to a pressure of 15Kg/Sqcm including rubbergaskets, flanges, nuts, bolts and washers complete asrequired.150 mm dia Nos. 10.00

273

NSI-63 Supply, Installation, Testing & Commissioning of Singleheaded, Gunmetal ISI marked oblique pattern hydrantlanding valve with 80 mm dia flange inlet and 63 mm diainstantaneous type female out let complete with gunmetalcap and G.I chain twist release type plug and all accessoriesas per IS:5290-1983 (Type A)

Each 73.00



274 NSI-64 SITC of First Aid Fire hose reel mounting swinging typecomplete with drum, bracket, stop valve and 20 mm dia.30metre long high pressure Dunlop hose reel tubing withgun metal shut off nozzle conforming to IS: 8090-1976 with5mm orifice. The hose reel shall be as per IS:884-1985.

Nos. 73.00

275 NSI-65 Providing & fixing Non per colating flexible hose (RRL type –A) ISI marked (IS:636 Type A) 63 mm dia x 15 m longcomplete with ISI marked Male and female coupling (IS:903)bound and riveted to hose pipe with copper rivets and 1.5Sq.mm.copper wire.brusting pressure not less than 22Kg/Sqcm. (two nos. for each hydrant-valve) complete asper direction of Engineer-in-charge. Braided type.

Each 146.00

276 NSI-66 Providing & Fixing Gun-metal 63 mm dia short size branchpipes with 20 mm dia nozzle with 63 mm instantaneouscoupling ISI marked (IS:903)

Each 73.00

277 NSI-67 Providing and fixing standard firemans axe with heavyrubber handle.

Nos. 73.00

278 NSI-68 Providing and fixing inlet breeching having C.I. body Twoway gun metal 63 mm dia instantaneous inlets conformingto IS 903 fitted with non return valves, 25 mm dia gunmetal drain cock, blank cap, brass chains and 150 mm diaflanges with all accessories suitable for local fire tendercomplete as required in Down Comer Riser.

Nos. 10.00

279 NSI-69 Providing and fixing 4mm thick glass door of size 2.1m x0.9m with anodized aluminium frame of size 0.10 x 0.05 Mwith centre opening for fire hose cabinet. Suitable marked onthe outside with the letters "FIRE HOSE" including lockingarrangement. All aluminium work to be in Red P.O. colour.

Nos. 73.00



280 NSI-70 Providing and fixing Carbon-di-oxide fire extinguishersconsisting of welded M.S cylinderical body,squeeze leverdischarge valve fitted with internal dischargetube,30cmslong high pressure discharge hose,discharge nozzle,suspension bracket, confirming to IS : 934 finishedexternally withred enamel paint and fixed to wallwithbrackets with rawl plug/dash fasteners complete withinternal charge.

Capacity 4.5 Kg Nos. 73.00

281 NSI-71 Providing and fixing water Co2(ISI marked) extinguishersincluding all accessories as per IS specification. (IS 934)with wall bracket with rawl plug.

9 K.g Each 73.00

Total of Sub Head-A: Piping, Hydrant and Accessories System

ELECTRICAL WORK NON SCHEDULED ITEMS

SUBHEAD-I : ELECTRICAL PANELSDesign, manufacturing, assembling, wiring, supply,installation, testing and commissioning of the followingextensible cubicle type indoor mounting, dead FRLS, fullycompartmentalised with hinged lockable detachable FRLS &back openable, dust and vermin proof, floor mounting sheetsteel clad switchboard fabricated out of 2 mm thick CRCApowder coated sheet steel suitable for use at 415 volts 3phase 4 wire 50 cycle system, BMS Compiatable and towithstand a symmetrical fault level of below mentioned kA at415 volts. Panels shall be fabricated in easily transportablesections, length, height, depth etc. to match with sitecondition, complete in all respect.

Academic Block282 NSI-72 SDB-02/1 (Typical for SDB-02/2, SDB-02/3 and SDB-02/4) Sets 16.00

Incoming



1 No. 100 A FP MCCB (35 KA) with E/F module & CoreBalancing type CT (CBCT) complete.Indication/metering1 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps1 set of Digital Multifunction meter for Voltage, Current, KW,KVA and Power Factor with selector switch. Each with 3nos.Of 2A SP MCB & 3nos 250/5A CTs (250A/500V) rating

Busbar1 set of 415V, 150A TPN aluminium busbars insulated withheat shrinkable coloured PVC sleeves. Outgoings4 Nos. 40A/ 63A FP MCB of 10 kA breaking capacity.2 Nos. 32 A DP MCB of 10 kA breaking capacity.

283 NSI-73 MDB-02 Sets 4.00

INCOMER1 No. 400A FP MCCB (35 KA) with E/f module including 1set of core balancing CTs complete.1 No. 250A FP ATS (Auto-Transfer Switch)

METERING & INDICATION2 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps2 sets of Digital Multifunction meter for Voltage, Current,KW, KWH KVA and Power Factor with selector switch. Eachwith 3nos. Of 2A SP MCB & 3nos 250/5A CTs (250A/500V)ratingBUS-BAR1 Sets of 400A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. 1 Sets of 500A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. OUTGOINGS1 No. 250A FP MCCB (35 KA) 14 Nos. 63A/ 100A FP MCCB (35 KA)2 No. 32A DP MCB (10 KA)

284 NSI-74 SDB UPS-02 Sets 4.00

Incoming2 Nos. 63A FP MCCB (35 KA)Indication/metering



2 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps2 sets of Digital Multifunction meter for Voltage, Current,KW, KVA and Power Factor with selector switch. Each with3nos. Of 2A SP MCB & 3nos 250/5A CTs (250A/500V)ratingBusbar2 Sets of 100A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. BUS COUPLER:-1 No. 63A FP MCCB (10KA) with over-rated neutral.1 Set of Breaker ON-OFF-TRIP indication Lamps .Outgoings4 Nos. 40/63A DP MCB (10 KA)6 Nos. 32A DP MCB (10 KA)

285 NSI-75 SDB HVAC Sets 4.00

Incoming1 Nos. 400A FP MCCB (35 KA)Indication/metering1 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps1 sets of Digital Multifunction meter for Voltage, Current,KW, KVA and Power Factor with selector switch. Each with3nos. Of 2A SP MCB & 3nos 400/5A CTs (400A/500V)ratingBusbar1 Sets of 500A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. Outgoings5 Nos. 125A FP MCCB

Admin Building286 NSI-76 MDB-01/1 (Typical for MDB-01/2) Sets 2.00

INCOMER1 No. 250A FP MCCB (35 KA) with E/f module & CoreBalancing type CT (CBCT) complete.1 No. 160A FP ATS (Auto-Transfer Switch)METERING & INDICATION2 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps



2 sets of Digital Multifunction meter for Voltage, Current,KW, KVA and Power Factor with selector switch. Each with3nos. Of 2A SP MCB & 3nos 250/5A CTs (250A/500V)ratingBUS-BAR1 Sets of 200A TPN Aluminium Bus Bar with colour codedPVC Sleeves1 Sets of 300A TPN Aluminium Bus Bar with colour codedPVC SleevesOUTGOINGS1 No. 160A FP MCCB (35 KA)6 Nos. 100/63A FP MCCB (35 KA)13 Nos. 40/63A FP MCB (10 KA)1 Nos. 32A DP MCB (10 KA)

287 NSI-77 SDB UPS-01 Sets 1.00

Incoming2 Nos. 100 A FP MCCB (35 KA)Indication/metering2 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps2 sets of Digital Multifunction meter for Voltage, Current,KW, KVA and Power Factor with selector switch. Each with3nos. Of 2A SP MCB & 3nos 250/5A CTs (250A/500V)ratingBusbar2 Sets of 150A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. BUS COUPLER:-1 No. 100A FP MCCB (10KA) with over-rated neutral.1 Set of Breaker ON-OFF-TRIP indication Lamps .Outgoings4 Nos. 40/63A DP MCB (10 KA)4 Nos. 32A DP MCB (10 KA)

Workshop288 NSI-78 MDB-03 Sets 1.00

Incoming1 No. 250 A FP MCCB (35 KA) with E/f module including 2set of core balancing CTs complete.Indication/metering1 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps



1 set of Digital Multifunction meter for Voltage, Current, KW,KVA and Power Factor with selector switch. Each with 3nos.Of 2A SP MCB & 3nos 250/5A CTs (250A/500V) rating

Busbar1 Sets of 300A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. Outgoings9 No. 100A FP MCCB (35 KA)5 No. 40/63A FP MCB (10KA)

Lecture Hall289 NSI-79 MDB-05/1 Typical for MDB-05/2 Sets 2.00

Incoming1 No. 100 A FP MCCB (35 KA) with E/f module including 2set of core balancing CTs complete.Indication/metering1 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps1 set of Digital Multifunction meter for Voltage, Current, KW,KVA and Power Factor with selector switch. Each with 3nos.Of 2A SP MCB & 3nos 250/5A CTs (250A/500V) rating

Busbar1 Sets of 150A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. Outgoings2 No. 40/63A FP MCCB (35 KA)9 No. 40/63A FP MCB (10KA)2 No. 32A FP MCCB (10 KA)

Library290 NSI-80 MDB-09 Sets 1.00

Incoming1 No. 250 A FP MCCB (35 KA) with E/f module including 2set of core balancing CTs complete.Indication/metering1 Sets of ÒN' , ÒFF', `Trip' and R,Y,B phase indicatinglamps1 set of Digital Multifunction meter for Voltage, Current, KW,KVA and Power Factor with selector switch. Each with 3nos.Of 2A SP MCB & 3nos 250/5A CTs (250A/500V) rating

Busbar



1 Sets of 300A TPN Aluminium Bus Bar with heat shrinkablecoloured PVC sleeves. Outgoings8 No. 63A FP MCCB (35 KA)6 No. 40/63A FP MCB (10 KA)1 No. 32A FP MCB (10 KA)

ISOLATOR BOX

291 NSI-81

Design, supply, installation, testing & commissioning offollowing capacity Isolator Box for use on 3 phase 4 wire415V, 50 Hz., AC supply with 1.6mm thick sheet steelenclosure with Jinged & lockable/ padlocked door, dulypowder coated including with MCCB Isolator complete etc.as required.

a 100A FP MCCB in Sheet Steel Enclosure Nos 2.00

b 63A FP MCB in Sheet Steel Enclosure Nos 9.00

Total of SUBHEAD-I : ELECTRICAL PANELS

SUBHEAD-II : LT CABLE & TERMINATIONLT CABLE (Supply)

292 NSI-82

Supply, Receiving & storing of the following sizes of 1.1 KV grade XLPE insulated Aluminium/ Copper conductor armoured, stranded, Power Cables in the existing Cable Trays / Pipes / laid underground/ surface etc., as required, as per technical specifications / details.

a 3.5C x 35 sq. mm Al. Ar. cable RM 80.00

b 3.5C x 25 sq. mm Al. Ar. cable RM 710.00

c 4C x 16 sq. mm Al. Ar. cable RM 630.00



d 4C x 10 sq. mm Al. Ar. cable RM 150.00

e 4C x 6 sq. mm Al. Ar. cable RM 355.00

f 4C x 25 Cu. Un Ar. Cable RM 150.00

g 4C x 16 Cu. Un Ar. Cable RM 640.00

Cable End Termination

293 NSI-83

Supply and making End termination with brass compressionGland and Al. lugs for the following size of PVC insulatedand PVC shielded/ XLPE Aluminium /Cu. conductorarmoured / unarmoured Power cables / wires of 1.1 KVgrade as required.

a 4C x 6 sq. mm Al. Ar. cable Nos 24.00

b 4C x 25 Cu. Un Ar. Cable Nos 14.00

c 4C x 16 Cu. Un Ar. Cable Nos 66.00

TOTAL OF SUBHEAD-II : LT CABLE & TERMINATION

SUBHEAD-III : CABLE TRAY Cable Trays Perforated Type

294 NSI-84

Supply and fixing of the following sizes of Perforated GI hotdipped galvanized cable trays (stove enameled) includingsuspending from ceiling with M.S. angle supports, nut bolts,washers, fasteners etc. as required. (Measurement of angleiron and MS rod shall be included in cable tray).



a 300 mm wide, 50 mm high,1.6mm thick RM 65.00

b 150 mm wide, 40 mm high,1.6mm thick RM 60.00

Cable Trays Ladder Type

295 NSI-85

Supplying and fixing ladder type prefabricated hot dipgalvanised G.I. cable tray complete with bend/tee joints,coupling plate and nuts, bolts, washers etc. with centralrungs of size 15mmx30mmx2.0mm thick at 250mm c/c.

a 600 mm ( side runner 20mmx50mmx2.0mm thick ) RM 55.00

b 900 mm ( side runner 20mmx50mmx2.0mm thick ) RM 45.00

TOTAL OF SUBHEAD-III : CABLE TRAY

SUBHEAD-IV : DISTRIBUTION BOARD

296 NSI-86

Supplying and fixing of following rating, 240/415 volts, "c"curve, Miniature Circuit Breaker suitable for inductive loadof following poles in the existing MCB DB complete withconnections, testing and commsioning as required.

a S/F FP MCB (63 AMPS) Nos 65.00

b S/F FP MCB (40 AMPS) Nos 60.00

TOTAL OF SUBHEAD-IV : DISTRIBUTION BOARD



SUBHEAD-VI : POINT WIRING

297 NSI-87

Supplying and laying following pair, 0.6 mm PVC insulatedcopper conductor, PVC Sheathed armoured telephonecable, as per ITD speccification S/WS-113C & S/WS-114, inthe existing trench/ pipe/ surface.

a 10 pair armoured Telephone wire RM 280.00

b 20 pair armoured Telephone wire RM 330.00

c 30 pair armoured Telephone wire RM 1,800.00

d 50 pair armoured Telephone wire RM 120.00

298 NSI-88Supplying, fixing, terminating tel. wire, testing &commissioning of following pair,Telephone Tag Blockcomplete in all respect.

a 10 Pair Nos 7.00

b 20 Pair Nos 6.00

c 40 Pair Nos 6.00

d 50 Pair Nos 4.00

e 80 Pair Nos 16.00



f 100 Pair Nos 1.00

g 150 Pair Nos 4.00

h 160 Pair Nos 2.00

Data & Voice Information Outlets (for InstitutionalBuildings)

299 NSI-89

Supply & Installation of CAT 5e information outletscomplying fully or exceeding with category 5e connectinghardware specifications for all pair combinations up to 100MHz. (Yellow in colour For Voice) complete as required.

Nos 420.00

300 NSI-90

Supply & Installation of CAT 6 information outlets complyingfully or exceeding with category 6 connecting hardwarespecifications for all pair combinations up to 250 MHz.Outlets shall use lead frame technology, non PCB pyramidtype. (Blue in Colour for Data) complete as required.

Nos 540.00

TOTAL OF SUBHEAD-VI : POINT WIRING

SUBHEAD-VII : SUPPLY OF LIGHT FIXTURESSupplying, storing and assembling the following fixturescomplete with electronic ballast / Dimmable electronic ballastwith performer chock, BEE 4 star or higher rating, withlamp complete, fixing arrangement etc. as required.

301 NSI-91

Ceiling Suspended LED Fixture (4400 Lumens) Cat No:Philips Stratus SP790P LED44S-5000 PSE ODSI orequivalent

95.00

302 NSI-92 Surface Mounted LED Fixture (3000 Lumens) CatNo:Philips Sereno RC869B LED 30S-6500 PSE W30LI20D8 GR or equivalent

260.00



303 NSI-93 Surface Mounted LED Fixture (3400 Lumens) Cat NoPhilips Cirrus Surface SM365C LED-34-5000 PSE-OD GRor equivalent

18.00

304 NSI-94 Recessed Mounted LED Fixture (3300 Lumens) Cat NoPhilips Cirrus RC 365/366B LED 33-5000 PSU OD GR/WHor equivalent

100.00

305 NSI-95 Wall Mounted 1x36W Florucent Light (Cat No: Wipro WCF51140 SGW or equivalent

32.00

306 NSI-96 Surface/wall mounted 1x28W Florucent light. (Cat No. :Philips Aspire T5 28W or equivalent)

Nos 85.00

307 NSI-97 Surface/wall mounted 1x28W Florucent light. (Cat No. :Philips Vector V2 T5 28W or equivalent)

Nos 317.00

308 NSI-98 Surface mounted 2x11W CFL light fitting (Cat No. : PhilipsFCS 518/211 or equivalent)

Nos 199.00

309 NSI-99 Surface mounted 2x18W CFL light fitting (Cat No. : PhilipsFCS 518/218 or equivalent)

Nos 1,395.00

310 NSI-100 Surface wall mounted 2x28W Florucent light. (Cat No. :Philips TCS 350 2xTL5-28W EBE C5 or equivalent)

Nos 2,330.00

311 NSI-101 Surface mounted 1x11 w CFL Mirror light (Cat No. : WiproWRP 2111 or Equivalent)

Nos 158.00



312 NSI-102 Surface mounted 1x11 w Toilet light (Cat No. : Bajaj BJLF311W RF or Equivalent)

Nos 296.00

313 NSI-103 Surface mounted 2x36W CFL light fitting (Cat No. : WiproWVP 44236 SWG or equivalent)

Nos 95.00

314 NSI-104 Recessed mounted 2x36W CFL light fitting (Cat No. :Philips FBS 440 or Equivalent)

Nos 578.00

315 NSI-105 Ceiling Suspended 1x 150W CDM-ET lamp (Philips Cat.No. HPK225 1 x CDM-ET 150W PR or equivalent)

Nos 100.00

316 NSI-106 Surface mounted 1x9W bulk head light (Cat No. : PhilipsFXC 101/109 or equivalent)

Nos 203.00

317 NSI-107

1 x 70 W Street light luminiare with pressure die castaluminium housing having POT optics, including providing of70W SON lamp complete (Philips Cat. No. SGP301 GLASON 70W(I) or equivalent)

Nos 4.00

318 NSI-108 Self illuminated LED Exit / Fire Exit Signs mounted onceiling/wall as per site conditions including providing ofmaintenance free batteries for 60 minutes back-up andbattery charger. (Cat No. : Bajaj 220208/9 or equivalent)

Nos 12.00

319 NSI-109 Supplying, storing, and assembling of the Ceiling Fan1200mm (5 Star Rating)

Nos 1,724.00



320 NSI-110 Supplying, storing, and assembling of the Ceiling Fan1400mm (ISI Marked)

Nos 40.00

321 NSI-111 Supplying, storing, and assembling of the Exhaust Fan300mm including making the hole to suit the size of fan,making good the damage, connection, testing,commissioning etc. as required. (ISI Marked)

Nos 80.00

322 NSI-112

Supplying, storing, and assembling of the Exhaust Fan450mm including making the hole to suit the size of fan,making good the damage, connection, testing,commissioning etc. as required. (ISI Marked)

Nos 44.00

323 NSI-113

Installation, Testing & commissioning of recessed type, pre-wired, fluorescent fitting/ compact flourescent fitting of alltypes, complete with all accessories and tube etc. on Falseceiling, including connection with 1.5 sq. mm FRLS PVCinsulated, copper conductor. single core cable and earthingetc. as required.

Each 688.00

TOTAL OF SUBHEAD-VII : SUPPLY OF LIGHT FIXTURES

SUBHEAD-IX : EARTHING

324 NSI-114

Supplying, Receiving, unloading, storing laying, effectingproper connections, testing and commissioning of followingsizes of 1.1 KV XLPE insulated single Copper conductor overall PVC Sheathed Unarmoured Cable on existing cabletrays/ Pipes trenches etc. including providing the MSsupports and clamps for fixing to supports in an approvedmanner complete as required and as per specifications. ( forearthing of UPS, EPABX, Network rack etc.)

a 1C x 50 sqmm XLPE Insualted copper conductorUnarmoured cable

RM 400.00

b 1C x 35 sqmm XLPE Insualted copper conductorUnarmoured cable

RM 80.00

c 1C x 16 sqmm XLPE Insualted copper conductorUnarmoured cable

RM 260.00



325 NSI-115

Supply, fabrication, erection, testing & commissioning of 2nos. 300mm long, 32mm x 6mm thick Cu. Bus-bar oninsulated PVC stud/ support in 450mm(L) x 250mm(W) x200mm(D) size of 16SWG, powder coated MS box withHinged & locakable door for dedicated earthing, completewith effecting proper connection of exisitingSTRIP/wires/cables with Cu. thimbles.

Set 26.00

TOTAL OF SUBHEAD-IX : EARTHING

SUBHEAD-X : POWER BACKUP & LIGHTING CONTROLSYSTEMUNINTERRUPTED POWER SUPPLY (UPS)

326 NSI-116

Supply, installation, testing and commissioning of 20 KVAUPS along with lead acid batteries, 6 Pulse rectifier + Filter +SNMP & IGBT Inverter based,complete as required. 20 KVA3 phase input (415 V + 15% / - 25%), three phase output(415 V + 0.05%) with 15 minutes battery backup of eachUPS complete with battery rack and connecting wires.

Sets 9.00

327 NSI-117

Supply, installation, testing and commissioning of 10 KVAUPS along with lead acid batteries, 6 Pulse rectifier + Filter +SNMP & IGBT Inverter based,complete as required. 10 KVA3 phase input (415 V + 15% / - 25%), three phase output(415 V + 0.05%) with 15 minutes battery backup of eachUPS complete with battery rack and connecting wires.

Sets 2.00

INVERTER FOR EMERGENCY LIGHTING

328 NSI-118

Supply, installation, testing and commissioning of 2.5 KVAInverter along with lead acid batteries giving a back up alongwith powder coated cabinet for housing the inverter andbatteries, complete as required and as per specifications,complete with 90 minutes battery backup

Sets 4.00

329 NSI-119

Supply, installation, testing and commissioning of 1.5 KVAInverter along with lead acid batteries giving a back up alongwith powder coated cabinet for housing the inverter andbatteries, complete as required and as per specifications,complete with 90 minures battery backup

Sets 3.00



TOTAL OF SUBHEAD-X : POWER BACKUP & LIGHTINGCONTROL SYSTEM

SUBHEAD-XI : Fire Alarm

INTELLIGENT FIRE DETECTION SYSTEM & ALARMSYSTEMSupply, installation, testing and commissioning of followingas per specifications :

330 NSI-120 Fire Alarm PanelProviding, installing, connecting, testing and commissioningof micro processor based Logic driven Network (withNetwork card as required) on Peer to Peer AnalogueAddessable of following no. of Loop (each loop accessingnot less than 125 addressable detectors) Fire Alarm ControlPanel. The Panel shall be able to give pin point location of allFire/ Fault conditions of addressable units via the addresscodes for each unit. The Panel shall also be able toautomatically switch off all Control Switches when ever anyAlarm is triggered. The Panel shall be coupled to the PASystem and have sealed maintenance free batteries ofrequired capacity of 24 volts capable of running for aminimum of 24 hours with battery charger, rectifier, Loopcards, Keypad operation, LCD unit to indicate Fire /FaultSignal of individual unit, in built / external printer to log allincoming data etc. complete in all respects. The Panel shallalso have Logic hardware and software built into it forinitiating specific AHU tripping, time delay operation ofhooter, subsequent operation of speakers. Panel shall haveprovide data output on Modbus for Building managementSystem Platform. One shall be able to read any Fire / Faultmessage from any Panel and any panel shall be able to readthe data of any networked panel. However, configuring/programming shall be from the panel itself.

a 3 Loop Panel Nos 1.00

b 2 Loop Panel Nos 4.00

c 1 Loop Panel Nos 1.00



331 NSI-121 Network repeator PanelProviding, installing, testing and commissioning ofNetworked Repeater Panel along with network card asrequired for Fire Alarm System with piezo sounder, LCDalpha numeric character display with accept / reset buttonsfor alarm address of any sensor / field device. The RepeaterPanel shall only provide field device address with number.

Nos 6.00

332 NSI-122 Multisensor DetectorSupplying, Installation, testing and Commissioning ofIntelligent and electronically addressable multi sensordetector with microprocessor in head and including the basewith LED etc as per specification.

Nos 1245.00

333 NSI-123 Heat DetectorSupplying, Installation, testing and Commissioning ofIntelligent and electronically addressable high sensitivity fourdimensional / laser detector with microprocessor in head and including the base with LED etc as per specification forserver rooms

Nos 4.00

334 NSI-124 Response IndicatorSupplying, Installation, testing and Commissioning ofResponse Indicator with twin transparent LED that shall glowred in case of fire

Nos 445.00

335 NSI-125 Fault Isolator ModuleSupplying, Installation, testing and Commissioning of Faultisolator module for isolating shorted, dewired and loosecircuits between two successive fault with automaticresetting arrangement.

Nos 48.00

336 NSI-126 Control ModuleSupplying, Installation, testing and Commissioning ofAddressable control modules for controlling AHU’s, andmagnetic fire door holders. Elevator recall, fire damper,pressurization fan, speakers, strobes etc.

Nos 8.00

337 NSI-127 Monitor ModuleSupplying, Installation, testing and Commissioning ofAddressable monitoring module to connect NO/NC contactssuch as pressure switch, flow switches, fire pump contacts(provided by Fire fighting contractor). However testing andcommissioning shall be included in the fire detection andalarm system contractor scope.

Nos 48.00



338 NSI-128 Manual Call BoxSupplying, Installation, testing and Commissioning ofAddressable Manual Call Box made of polycarbonate withplastic break glass front. MCB shall be recessed in wall .The MCB shall have "IN CASE OF FIRE BREAK GLASS"imprinted on the facia.

Nos 48.00

339 NSI-129 Hooter with StrobeSupplying, Installation, testing and Commissioning of Piezoelectronic Hooters/ Sounders of 90 dBA sound levelminimum 10 feet away from the device with strobe includingControl Module complete as required, including ceiling/ wallmounting arrangements .

Nos 81.00

340 NSI-130 Telephone Talk Back JackSupplying, Installation, testing and Commissioning ofAddressable Two Way communication Fire Fighterstelephone Jack

Nos 52.00

341 NSI-131 Supplying, Installation, testing and Commissioning of of Firefighters Handset

Nos 6.00

342 NSI-132 TWO Way Fire Fighters (DVC)Supply, Installation, Testing & commissioning of integrated 8channel Digital Voice evacuationn & Two WayCommunication Fire Fighter expandable upto 12 channelssystem capable to supervision of all circuits with accessoriesetc. as required for complete system. The equipment shallbe of same make as Panel for Fire Alarm System.

Nos 6.00

343 NSI-133 Audio Coupling TransformerSupply, Installation, Testing & commissioning of AudioCoupling Transformer to integrate DVC with analogamplifiers of PA System along with all accessories,hardwares as required..

Nos 6.00

344 NSI-134 Software System



Supplying, Installation, testing and Commissioning of FireAlarm PC Station consisting of Pentium core i3 processor,21" colour LCD TFT monitor, 1024 MB RAM, 120 GB HardDisk, DVD Drive, USB Port, Ethernet port, mouse, WindowsXP/7 based Software, Graphic (GUI) software including copyin CD ROM complete as required. PC Work Station shallinclude complete Fire Alarm Graphics Software includingfloor plans with location of detectors and other devices. AllFloors shall be available as drawing files with location ofdetectors and devices complete with Loop number and otherdetails as available on the Software. The Software shall becustomised to the Building and Fire Alarm layout of thebuilding with location of detectors marked on floor drawingscomplete with detector address, detector condition etc. ThePC and software shall allow for programming / reprogramming of detector addresses, addition or deletion ofdetectors with address change, condition of detectors, eventlogs for 1000 events complete. The Softwares shall besupllied complete with registered CD unit complete and sitetraining.

Set 1.00

345 NSI-135 Fire Survival Cable for Signal

.

Supplying, Installation, testing and Commissioning of 2C x1.5 sqmm, annealed Copper conductor silicon rubberinsulated along with thinned annealed copper earthconductor covered with electrostatic screen ofaluminium/polyester tape, outer sheathed with (LSZH) firesurvival cable confirming to BS-6387 CWX, LPCB certified.

RM 27160.00

346 NSI-136 Network WireSupply, Receiving & storing of the following sizes of 1.1 KV grade XLPE insulated Aluminium/ Copper conductor armoured, stranded, Power Cables in the existing Cable Trays / Pipes / laid underground/ surface etc., as required, as per technical specifications / details.Supplying of 2C x 2.5 Sq. mm. Cooper Armoured Cable RM 1,320.00

TOTAL OF SUBHEAD-XI : Fire Alarm

SUBHEAD-XII : PUBLIC ADDRESS SYSTEM



347 NSI-137

Supply installation testing and commissioning of flush mountceiling speakers Philips cat No.LBD0606 or equivalent (6 Watts Read Power) including linematching transformerceiling recessed mounting in false ceiling with clampcomplete as required.

Set 8.00

348 NSI-138

Supply installation testing and commissioning of Wall mountcoloumn/ Box type speaker Philips cat No.LBD 8352 orequivalent (6 Watts Read Power) including linematchingtransformer Wall Mounted with clamp complete as required.

Set 1210.00

349 NSI-139

Supplying, Installation, testing and Commissioning of 1 x120W PA Amplifier complete with Rack of suitable size andchannel mixer, 5 band graffic equalizer complete withinternal wiring etc. as required.

Set 4.00

350 NSI-140


Set 1.00

351 NSI-141


Set 17.00

352 NSI-142

Supply, installation, testing & Commissioning of Gooseneckcardiod microphone for zonewise paging, 15keys extendableupto 105 having Emergency Broadcast, Volume Control,RJ45 connector, with power supply etc. complete asrequired.

Nos 6.00

353 NSI-143

Supplying, installing, testing and commissioning of PASystem Operator Console complete with 1 no CD Playerdeck MP3 format, Change over Panel for connection to theFire Alarm Panel, a Mains Panel, a standby battery ofrequired capacity and a Monitor Panel all pre wired and rackmounted complete in all respects & as per specifications. PASystem shall be coupled to the Fire Alarm System.

Nos 6.00

354 NSI-144

Supply, installation, testing & Commissioning of FlushMounted Modular Type Volume Controller in MS Box withPlate, Knob, Panel etc. complete with interconnections asrequired.

Nos 360.00



355 NSI-145 Supply, installation, testing & Commissioning of 0.75 Sq. mmtwin twisted unseathed speaker wire in existing conduit.

Nos 28,400.00

TOTAL OF SUBHEAD-XII : PUBLIC ADDRESS SYSTEM

SUBHEAD XIII : CCTV SYSTEM

356 NSI-146

Supply, installation, testing and commissioning of 25Xoptical and 10X digital Pan/Tilt/Zoom cameras includingintegrated Housing , Connectors, Lens, Camera Mounts,Power Supply with battery backup of 15 minutes and allAncillary Equipment & all accessories including RemoteReciever Unit and Pan Tilt Unit (including driver cables) asper specifications

a With Wall mounted indoor housing Nos 1.00

b With Wall mounted outdoor housing with sunshield, heaterand blower

Nos 5.00

357 NSI-147 Supply, installation, testing and commissioning ofkeyboard/Joystick for controlling PTZ cameras

Nos 6.00

358 NSI-148

Supply, installation, testing and commissioning of 1/3interline transfer CCD minidome Fixed indoor dome typewith 2.8~10 mm lens,0.1 lux 530TVL, BLC, WDR, D\Ncamera Mounts, power supply with battery backup of 15minutes and all Ancillary Equipment & all accessories as perspecifications.

Nos 19.00

359 NSI-149

Supply, installation, testing and commissioning of DVR withbuilt in multiplexer for 9 input real time, live monitoring andplayback, 400 fps full frame recording with 2 video outputsand intelligent power failure recovery, The DVR shouldprovide with remote monitoring software with Hard Diskfacility recording(30 Days Backups) as per specifications.

Nos 6.00

360 NSI-150 Supplying, Installation, testing and Commissioning of 21”CCTV colour TFT Monitor including all accessories

Nos 6.00



TOTAL OF SUBHEAD XIII : CCTV SYSTEM

SUBHEAD XIV : SAFETY EQUIPMENTS

361 NSI-151

Supplying and fixing of non-skid rubber mat 12mm thick and900mm width as required including cutting to requiredlengths of approved make with Test Certificates suitable for1100 Volt.

Mtrs. 300.00

362 NSI-152 Supplying and fixing of shock treatment chart written inEnglish and Hindi duly framed in as required.

Each 10.00

363 NSI-153 Supplying and fixing of first aid box as approved completewith standard kit as prescribed by Indian Red Cross.

Each 9.00

364 NSI-154 Supply of Hand gloves made out of rubber suitable for 1100volt grade

Pairs 10.00

365 NSI-155 Supplying and fixing of a set of four nos. of fire bucketpainted red and duly filled with sand conforming to IS: 2546-1974 complete with MS stand suitable for supporting fourbuckets (Pedestal type)

Each 10.00

366 NSI-156 Supplying and fixing of 4.5 kgs. Capacity carbon dioxide typefire extinguisher of ISI approved make with wall mountingbracket as required.

Each 10.00

367 NSI-157 Supplying and fixing of 4 kgs. Capacity ABC dry powder typefire extinguisher of ISI approved make with wall mountingbracket as required.

Each 10.00

TOTAL OF SUBHEAD XIV : SAFETY EQUIPMENTS

SUBHEAD XV : DEHUMIDIFICATION



368 NSI-158 Supply, installation, testing & commissioning of desiccanttype dehumidifier system complete with Process Blower,Reactivation Blower, Post Cooling Coil, DehumidifierSection, electrical control panel & necessary insulation,dampers, controls and condensate connection, DX typeoutdoor unit which shall be hooked with dehumidifier etccomplete in all respects and as per specifications. Zero leak/ very low leakage, Aluminium supply air, return air, fresh air& exhaust air dampers. The desiccant honeycomb rotormedia shall be adsorbent, non toxic, non flammable, fullywater washable, having metal silicate desiccant with nettorganics less than 2%. The unit shall be fully welded bothinternal and external provided with double skin insulatedpanels within the industrial quality welded SS frame work.

a Ground & Second Floor, each 2500 CFM ( 12 TR ) No. 8.00

b First & Third Floor, each 3000 CFM ( 14 TR ) No. 8.00

AIR DISTRIBUTION

369 NSI-159 Supply, installation and testing of Factory fabricated GSSducts as per SMACNA of following thickness includingneccesary supports, adjustable dampers, vanes, etc.,complete as per specifications.26 gauge galvanised sheet steel Sqm. 1,660.00

370 NSI-160 Supply, installation, testing and balancing of powder coatedExtruded Aluminium Supply air Grilles with volume controldampers as per specifications as required.

Sqm. 8.00

THERMAL INSULATION371 NSI-161 Supply, installation testing and commissioning of acoustic

insulation. Material shall be open cell nitrile rubber ( with selfadhesive ) based- fibre glass free with 140-180 Kg/m3density and all accessories as per specification.



15 mm thick acoustic lining. Sq.m. 100.00

372 NSI-162 Supply, installation and testing of External Thermalinsulation on ducts covered with closed cell crosslinkedpolyethylene foam having density 25-30 with self adhesiveas per the approved specifications. The above shall beinclusive of self adhesive, tapes, UV protective coating overexposed ducts as per the specifications as required.

12 mm thick insulation for supply & return air ducts. Sq.m. 1,820.00

TOTAL OF SUBHEAD XV : DEHUMIDIFICATION

TOTAL OF ELECTRICAL WORKS

LIFT WORK NON SCHEDULED ITEMSSUBHEAD - I - LIFT

373 NSI-163 Supply, installation, testing & commissioning of 13passanger (884 Kg) lifts having contract speed of 1.00 MPSserving different floors in the lift shaft. Flooring of PVC tiles 3mm thick, automatic electric leveling device, automaticrescue device. Lift will be complete with combined luminoushall button with seven segment digital hall position indicatorat all floor, car operating panel with luminous buttons, sevensegment digital car position indicator combined with directionarrows, overload warning indicator, battery operated alarmbell and emergency light, fireman's switch at main lobbyenclosed complete as per CPWD General Specification forelectrical works and detail specification enclosed as under:-

1) DESIGN OF LIFTS - PASSENGER TYPE2) CAPACITY - 13 PASSENGER / 884 KG3) SPEED - 1.00 m/s4) DRIVE - GEARLESS MACHINE A.C. VVVF DRIVE5) MACHINE ROOM LOCATION ON TERRACE6)TRAVEL - 7.00 Mtr. (Approximate)7) FLOORS - 0, 1, 2 Floor8) NO. OF STOPS/OPENINGS - 3 Stops



9) REQUIRED WELL SIZE - As per IS specification10) POWER SUPPLY - 415 V - 3 Phase 50 HZ AC11) AUXILIARY - Single Phase 220 V AC12) CAR SIZE - As per IS specification13) PIT DEPTH - 1600 MM14) CAR ENCLOSUREa) CAR CEILING - SS HAIRLINE FINISHb) CAR PANELS - SS HAIRLINE FINISHc) ILLUMINATION - FLUROSCENT LIGHTd) CAR FLOORING - 20 MM RECESS15) NO. OF ENTRANCE - ONE LOCATION FRONT16) CAR ENTRANCE - AUTOMATIC COPD DOORS IN SSHAIRLINE FINISH17) DOOR SAFETY - FULL HEIGHT INFRARED LIGHTCURTAIN18) LANDING ENTRANCE - AUTOMATIC COPD DOORSIN SS HAIRLINE FINISH19) CONTROL - SIMPLEX SELECTIVE COLLECTIVE

20) Complete in all resprects as per IS and local statuaryauthority

Set 2.00

374 NSI-164 Supply, installation, testing & commissioning of 13passanger (884 Kg) lifts having contract speed of 1.00 MPSserving different floors in the lift shaft. Flooring of PVC tiles 3mm thick, automatic electric leveling device, automaticrescue device. Lift will be complete with combined luminoushall button with seven segment digital hall position indicatorat all floor, car operating panel with luminous buttons, sevensegment digital car position indicator combined with directionarrows, overload warning indicator, battery operated alarmbell and emergency light, fireman's switch at main lobbyenclosed complete as per CPWD General Specification forelectrical works and detail specification enclosed as under:-

1) DESIGN OF LIFTS - PASSENGER TYPE2) CAPACITY - 13 PASSENGER / 884 KG3) SPEED - 1.00 m/s4) DRIVE - GEARLESS MACHINE A.C. VVVF DRIVE5) MACHINE ROOM LOCATION TERRACE6)TRAVEL - 10.00 Mtr. (Approximate)7) FLOORS - 0, 1, 2, 3 Floor8) NO. OF STOPS/OPENINGS - 4 Stops9) REQUIRED WELL SIZE - As per IS specification10) POWER SUPPLY - 415 V - 3 Phase 50 HZ AC11) AUXILIARY - Single Phase 220 V AC



12) CAR SIZE - As per IS specification13) PIT DEPTH - 1600 MM14) CAR ENCLOSURE

a) CAR CEILING - SS HAIRLINE FINISHb) CAR PANELS - SS HAIRLINE FINISHc) ILLUMINATION - FLUROSCENT LIGHTd) CAR FLOORING - 20 MM RECESS15) NO. OF ENTRANCE - ONE LOCATION FRONT16) CAR ENTRANCE - AUTOMATIC COPD DOORS IN SSHAIRLINE FINISH17) DOOR SAFETY - FULL HEIGHT INFRARED LIGHTCURTAIN18) LANDING ENTRANCE - AUTOMATIC COPD DOORSIN SS HAIRLINE FINISH19) CONTROL - SIMPLEX SELECTIVE COLLECTIVE


Set 8.00

375 NSI-165 Supply, installation, testing & commissioning of 15passanger( 1020 Kg) lifts having contract speed of 1.00MPS serving different floors in the lift shaft. Flooring of PVCtiles 3 mm thick, automatic electric leveling device,automatic rescue device. Lift will be complete with combinedluminous hall button with seven segment digital hall positionindicator at all floor, car operating panel with luminousbuttons, seven segment digital car position indicatorcombined with direction arrows, overload warning indicator,battery operated alarm bell and emergency light, fireman'sswitch at main lobby enclosed complete as per CPWDGeneral Specification for electrical works and detailspecification enclosed as under:-

1) DESIGN OF LIFTS - PASSENGER TYPE2) CAPACITY - 15 PASSENGER / 1020 KG3) SPEED - 1.00 m/s4) DRIVE - GEARLESS MACHINE A.C. VVVF DRIVE5) MACHINE ROOM LOCATION TERRACE6)TRAVEL - 10.00 Mtr. (Approximate)7) FLOORS - 0, 1, 2, 3 Floor8) NO. OF STOPS - 4 Stops9) REQUIRED WELL SIZE - As per IS specification10) POWER SUPPLY - 415 V - 3 Phase 50 HZ AC11) AUXILIARY - Single Phase 220 V AC12) CAR SIZE - As per IS specification13) PIT DEPTH - 1600 MM14) CAR ENCLOSURE



a) CAR CEILING - SS HAIRLINE FINISHb) CAR PANELS - SS HAIRLINE FINISHc) ILLUMINATION - FLUROSCENT LIGHTd) CAR FLOORING - 20 MM RECESS15) NO. OF ENTRANCE - ONE LOCATION FRONT16) CAR ENTRANCE - AUTOMATIC COPD DOORS IN SSHAIRLINE FINISH17) DOOR SAFETY - FULL HEIGHT INFRARED LIGHTCURTAIN18) LANDING ENTRANCE - AUTOMATIC COPD DOORSIN SS HAIRLINE FINISH19) CONTROL - SIMPLEX SELECTIVE COLLECTIVE


Set 2.00



376 NSI-166 Supply, installation, testing & commissioning of 10passanger( 680 Kg) lifts having contract speed of 1.00 MPSserving different floors in the lift shaft.Flooring of PVC tiles 3mm thick, automatic electric leveling device, automaticrescue device. Lift will be complete with combined luminoushall button with seven segment digital hall position indicatorat all floor, car operating panel with luminous buttons, sevensegment digital car position indicator combined with directionarrows, overload warning indicator, battery operated alarmbell and emergency light, fireman's switch at main lobbyenclosed complete as per CPWD General Specification forelectrical works and detail specification enclosed as under:-

1) DESIGN OF LIFTS - PASSENGER TYPE2) CAPACITY - 10 PASSENGER / 680 KG3) SPEED - 1.00 m/s4) DRIVE - GEARLESS MACHINE A.C. VVVF DRIVE5) MACHINE ROOM LOCATION TERRACE6)TRAVEL - 7.00 Mtr. (Approximate)7) FLOORS - 0, 1, 2, Floor8) NO. OF STOPS -3 Stops9) REQUIRED WELL SIZE - As per IS specification10) POWER SUPPLY - 415 V - 3 Phase 50 HZ AC11) AUXILIARY - Single Phase 220 V AC12) CAR SIZE - As per IS specification13) PIT DEPTH - 1600 MM14) CAR ENCLOSUREa) CAR CEILING - SS HAIRLINE FINISHb) CAR PANELS - SS HAIRLINE FINISHc) ILLUMINATION - FLUROSCENT LIGHTd) CAR FLOORING - 20 MM RECESS15) NO. OF ENTRANCE - ONE LOCATION FRONT16) CAR ENTRANCE - AUTOMATIC COPD DOORS IN SSHAIRLINE FINISH17) DOOR SAFETY - FULL HEIGHT INFRARED LIGHTCURTAIN18) LANDING ENTRANCE - AUTOMATIC COPD DOORSIN SS HAIRLINE FINISH19) CONTROL - SIMPLEX SELECTIVE COLLECTIVE


Set 4.00

TOTAL OF LIFT WORKS

part 2 financial bid schedule (bill) of … revised boq of... · piping, hydrant and accessories...

Documents