pepin manufacturing inc. - brown's medical...

PEPIN MANUFACTURING INC.

A Diverse Company with an InnovativeTeam Dedicated to Specialization, Quality and Service!

PEPIN MANUFACTURING INC.1875 HWY 61 South, Lake City, MN 55041

800-291-6505 • 651-345-5655 • Fax: 651-345-5656www. pepinmfg.com • Email: [email protected]

We’re here to serve you - Give us a call!

Welcome to Pepin Manufacturing

Pepin Manufacturing, Inc. is the fast, friendly, and flexible solution to your specific product needs. Whether you are lookingfor medical electrodes or medical device components, lint rollers, our own MarfreeTM Urethane, or custom contractconverting/fabrication, Pepin Manufacturing has the solution.

Since 1993 we at Pepin Manufacturing have been exceeding the expectations of our clients with high quality products andexceptional service. We’re an ISO 13485/CE certified manufacture, and are FDA registered for our medical devicemanufacturing. Give us a call today and find out that PMI has the problem solving capabilities, and the dedicatedpersonnel to give you the experience, confidence, and quality you expect.

Custom Conversion/Fabrication – Pepin Manufacturing, Inc. is aconverter/fabricator of specialty components and substrates to provide solutions forcustomers in a wide range of industries. PMI specializes in accurate in-lineregistration of many low- profile medical and industrial components and products.Whether your product requires precision rotary die-cutting, multiple-layerlaminating, in-line (4) color flexographic printing, tight tolerance slitting, customassembly and packaging, PMI has the materials, engineering knowledge, and thecommitment to quality to make the difference in your product.

MarFree™ Urethane – Protect your dies and materials with PepinManufacturing’s MarFreeTM urethane film. Available in a variety of sizes andthickness. Our urethane film pays for itself by reducing wear on your dies and promoting clean precise bends.Our MarFreeTM urethane is tough, safe and easy to use, no mater what your application. Most orders can ship the same day or next day!

Electrodes – At Pepin Manufacturing, we understand that not all medicalelectrodes are created equal. Pepin Manufacturing, Inc. is an ISO / CE Certified Manufacturer, and is FDA Registered with over 20 years experience in theelectrotherapy market. PMI uses it’s technical knowledge to create the highestquality electrodes using only the best materials and most advanced processes.PMI can assist in developing custom electrodes and packaging to meet yourneeds.

Lint Rollers – Pepin Manufacturing takes an ordinary, everyday product andadds some new features! Our Lint Busters and Hair Busters feature an extratacky adhesive for maximum effectiveness and each adhesive sheet containstwo dry edges to make peeling and disposal easy.

Lint Busters and Hair Busters come in a variety of sizes, and we cancustomize the handles with your message, making these rollers agreat promotional item. We also have display cases for floor andcounters, most orders can be shipped the same day!

Quality DrivenDedicated Timely

DependablePrecision Diverse

PersonalizationService Excellence

Urethane

MarFree!TM Urethane from Pepin Manufacturing, Inc.

• Prevents Marking On Various Materials

• Produces Clean and Precise Bends

• Available in 2”, 4”, 6” and 12” widths, .015” & .030” thickness

• Reduces Wear on Dies

• Competitively Priced

• Safe and Easy to Use

• Most Orders Ship Same Day or Next Day

MarFree! Urethane will prevent marring die marks on a wide variety of metal bending polished surfacesincluding stainless steel, painted metal, aluminum and polished materials.



Female Die

Male Die

12”

4”

2”

6”

Save Time andMoney By Avoiding

Re-Polishing andBuying New Blanks!

Samples available upon request

MarFree! Urethane from PMI is the newestform of protection and cost savings for your

dies and materials!Tough Urethane Film for

MarFree! Bending

Electrodes

PMI electrodes

• Silver (Ag) Coated Carbon Film for Reduced Impedance,Greater Conductivity and Uniform Current Dispersion.

• Extra Long 6” Pure Copper Lead Wires with Dispersive Heads. Helps toprevent Wire Pull-Out from Body of Electrode.

• Molded .080” Wire Connections for Secure Fit.(Patented Pin Connectors)

• Full Electrode Line with Many Options in Sizes, Shapes and Materials,with Flexible & Durable Top Coat Materials.

• Reusable Gels for Optimal Electrode Life.

• Excellent Customer Service and Support with Competitive Pricing.

• Can Assist in Developing Custom Electrodes, Packaging and Private Labeling to Meet Your Needs.

• Usually able to Ship in 1-3 Days!

• The unique manufacturing processes and material usedin PMI electrodes provide a uniform current dispersionthroughout the desired treatment site of picture eachelectrode. This uniform current dispersion eliminates“hot spots” and provides the maximum treatment tothe entire electrode surface.

• A leading brand electrode and a PMI electrode areplaced on a “Current Dispersion Meter”. An electricalcurrent is passed through each electrode for a period of60 seconds. The electrical voltage output is identical foreach electrode. Results are shown at right.

• The PMI electrode displays optimal current dispersionwhile the leading brand treats less than 50% of thesurface, mainly where the wire is placed.

The difference is clear…



Current is concentrated in a small area, creating a “hot spot” thatis less effective.

PMI electrodes are able to fully disperse the electrical currentthroughout the entire surface of the electrode.

For Medical Professionals Who care!

Pepin Manufacturing, Inc.

Pepin Manufacturing Inc., an ISO- 13485:2003 Certified, CE Mark Registered is a leading manufacturer with over 25 yearsexperience in the electrotherapy market. PMI uses its technical knowledge to create the highest quality electrodes usingonly the best materials and most advanced processes.

PMI Electrode Current Dispersion

Maximum-Use Reusable Gel

Skin

Conductive Carbon Film

Conductive (Ag) Silver

Durable Topical Material

White Foam

Topical Material

Tan Tricot

Tan Spunlace

White Spunlace

Cool Blue

Pinstyle - ReuseableCarbon Rubber

Skin Friendly Blue Gel

Round Square Oval Rectangle Rectangle Snap Butterfly BacklaspRound Snap Square Snap Backlasp w/snap

WF1250

WF240

1.5”x 2.5”4cm x 6.5cm

2”x 4”5cm x 10cm

WT240

WT350

2”x 4”5cm x 10cm

3”x 5”7.5cm x 13cm

ST8

ST1

.8”2cm

1”2.5cm

ST111.75”x 1.75”4.5cm x 4.5cm

EW22”

5cm

ST131.75”x 3.75”4.5cm x 9.5cm

All electrodes are sold 4 per pack, 20 packs per case unless marked otherwise. • One electrode per package • Two electrodes per package

WF222”x 2”

5cm x 5cm SF3751.375”3.5cm

BWT111.75”x 1.75”4.5cm x 4.5cm

WF464”x 6”

10cm x 15cm WF13151.5” x 13”

4cm x 33cm SF13151.5” x 13”

4cm x 33cm

BWT131.75”x 3.75”4.5cm x 9.5cm

EW131.75”x 3.75”4.5cm x 9.5cm

BST111.75”x 1.75”4.5cm x 4.5cm BST13

1.75”x 3.75”4.5cm x 9.5cm

Choose material, electrode shape, andsize. Item number is in light blue box.

EW464”x 6”

10cm x 15cm EW13151.5” x 13”

4cm x 33cm

WF1

WF375

WF2

WF3

1”2.5cm

1.375”3.5cm

2”5cm

3”7.5cm

WT15

WT11

WT22

1.5”x 1.5”4cm x 4cm

1.75”x 1.75”4.5cm x 4.5cm

2”x 2”5cm x 5cm

PC11

PC11NGNo Gel

PT22

1.75”x 1.75”4.5cm x 4.5 cm

1.75”x 1.75”4.5cm x 4.5cm

2”x 2”5cm x 5cm

PC13

PC13NGNo Gel

ESU-1

PT24

1.75”x 3.75”4.5cm x 9.5cm

1.75”x 3.75”4.5cm x 9.5cm

2.2”x 2.5”5.5cm x 6.5cm

2”x 4”5cm x 10cm

WTS1250

WTS240

1.5”x 2.5”4cm x 6.5cm

2”x 4”5cm x 10cm

WTS15

WTS22

1.5”x 1.5”4cm x 4cm

2”x 2”5cm x 5cm

WWS1250

WWS240

1.5”x 2.5”4cm x 6.5cm

2”x 4”5cm x 10cm

WF153

WF13

WF35

WF47

GVKgalvanic kit

WF58

1.5”x 3.5”4cm x 9cm

1.75”x 3.75”4.5cm x 9.5cm

3”x 5”7.5cm x 13cm

4.25”x 7”11cm x 18cm

4.25”x 7”11cm x 18cm

5”x 8”13cm x 20cm

WWS13

WWS35

WWS47

WWS58

1.75”x 3.75”4.5cm x 9.5cm

3”x 5”7.5cm x 13cm

4.25”x 7”11cm x 18cm

5”x 8”13cm x 20cm

WT152

WT13

WT35

WT47

1.5”x 2.5”4cm x 6.5cm

1.75”x 3.75”4.5cm x 9.5cm

3”x 5”7.5cm x 13cm

4.25”x 7”11cm x 18cm

WTS152

WTS13

WTS58

1.5”x 2”4cm x 5cm

1.75”x 3.75”4.5cm x 9.5cm

5”x 8”13cm x 20cm

WT8

WT1

WT375

WT2

WT25

WT3

.8”2cm

1”2.5cm

1.375”3.5cm

2”5cm

2.5”6.5cm

3”7.5cm

WTS1

WTS375

WTS2

WTS25

WTS3

1”2.5cm

1.375”3.5cm

2”5cm

2.5”6.5cm

3”7.5cm

WWS375

WWS2

WWS3

1.375”3.5cm

2”5cm

3”7.5cm

WWS15

WWS11

WWS22

1.5”x 1.5”4cm x 4cm

1.75”x 1.75”4.5cm x 4.5cm

2”x 2”5cm x 5cm

EW15

EW22

1.5”x 1.5”4cm x 4cm

2”x 2”5cm x 5cm

Electrode Shape

Indicates TricotTopical Material

E-Stim Units

TENS-20003 Mode without Timer

Channels: Dual, Isolated between channelsModes: Burst, Constant, ModulationPulse Width: 60 to 250 microseconds, adjustablePulse Amplitude (intensity): 0 to 80 mA eachchannel, adjustable (500 ohm load)Pulse Frequency: 2 to 150 Hz adjustableModulation Mode: Pulse width automatically varies isa cyclical pattern over an interval of nominally 4 secondsBurst Mode: 7 pulses per burst, 2 bursts per second,100Hz internal frequency of burstBattery Life: 70 hour average (alkaline)Waveform: Modified square wave with zero net directcurrent

TENS-25003 Mode with Timer

Channels: Dual, Isolated between channelsModes: Burst, Constant, ModulationPulse Width: 60 to 250 microseconds, adjustablePulse Amplitude (intensity): 0 to 80 mA eachchannel, adjustable (500 ohm load)Pulse Frequency: 2 to 150 Hz adjustableTimer: 30 Min, 60 Min, or ConstantModulation Mode: Pulse width automatically varies isa cyclical pattern over an interval of nominally 4 secondsBurst Mode: 7 pulses per burst, 2 bursts per second,100Hz internal frequency of burstBattery Life: 70 hour average (alkaline)Waveform: Modified square wave with zero net direct current

TENS-6000Digital TENS with Timer

Channels: DualModes: Burst, Normal, MRW, SD, Bi-PulsePulse Width: 50-300 microseconds, adjustablePulse Amplitude (intensity): 0 to 80 mA eachchannelPulse Frequency: Variable, 2-150 HzWaveform: Asymmetric biphasic square pulseTimer: 5 to 90 Min, or constant timeCompliance Timer: 60 sets of operation records,999 hours record time

TENS

* All values have +/- 10% tolerance

EMS-3000Muscle Stimulator

Channels: Dual, Isolated between channelsModes: Burst, Constant, ModulationPulse Amplitude: Constant current 0 to 80 mA eachchannel, adjustable (500 ohm load)Pulse Frequency: Adjustable, 5, 30, 100 HzCycle On/Off: 1-30 sec.On Ramp: Adjustable, 1, 3, 5 secondsBattery Life: Approx. 70 hoursWaveform: Modified square wave with zero net direct current

EMS-6500Digital EMS with Timer

Channels: DualModes: Synchronous (S), Constant (C), and Alternate (A)Pulse Amplitude: 0 to 80 mA peak into 500 ohm loadeach channel, adjustablePulse Frequency: 2 to 120 HzPulse Ramp: 1 to 8 secondsContraction: Variable Control (2-99 Sec)Relaxation: Variable Control (2-99 Sec)Waveform: Asymmetric biphasic square pulse wavewith zero net direct currentCompliance Timer: 60 sets of operation records,999 hours record time

Combo UnitTENS/EMS

The Combo T/E Unit is battery operated pulse generatorthat sends electrical impulses electrodes to the body andreach the nerves and underlying muscle group. This unitis a combination stimulator of TENS and EMS which canbe used for muscle stimulation and pain relief. The deviseis provided with two controllable output channels, eachindependent of each other. An electrode pair can beconnected to each output channel. The intensity controlsare protected by a cap to avoid accidental touch. Thesettings are controlled by press buttons.

EMS COMBO



PGS-123Pulsed-Galvanic Stimulator

Channels: SingleOutput Mode: Synchronous or Alternation.Alternation mode-LED alternates between green and red colorPulse Rate: 2-100 HzWave Form: Positive or negative wave formPulse Duration: 5 usIntraPulse Interval: 100 us.

Micro-2000Analog Microcurrent

Channels: DualOutput Waveform: Modified square DC biphasic pulsesof 0.3Hz, 8Hz, and 80Hz changing polarity at intervals of1 seconds.Timer: 20, 40 minutes and constantFrequency: 0.3, 8 and 80HzOutput Voltage: 12 Volts

GALVANIC MICROCURRENT

* All values have +/- 10% tolerance

IF-2206ADigital “Piggy Back”

Channels: Dual, isolatedPulse Amplitude: Adjustable, 0-60 mA into 500ohmeach channelCarrier Frequency: 4000Hz fixed (channel 1)Modulating Frequency: 4001-4160 adjustable(channel 2)Constant Mode: 4-160 bps, adjustableAuto Sweep: 8-145 bps, 4-45 bps, 4-set bpsFrequency Shift Percent: Shifts from 30% below setfrequency to 60% above then back 30% below set frequencyOutput Configure: Quadra polar (4 electrodes)Wave Form: Symmetrical Balanced Sine WaveInterference Pulse Frequency: 4-160 bps; adjustableto 4 bps/stepPulse Duration: 125us maximumPatient Compliance Meter: Displays treatment timesPateint Lock System: Prevents patient from changingthe parameters set by the physician/clinicianTimer: 15 and 30 minutes

IF-2206Digital True Sine Wave

Channels: Dual, Isolated Between ChannelsPulse Amplitude: Adjustable, 0-60 mA into 500 Ohmeach channelCarrier Frequency: 4000 Hz fixed (Ch. 1)Modulating Frequency: 4001-4160 Adjustable (Ch. 2)Frequency Function Mode: Constant Mode (C): 4-160bps, Adjustable Auto Sweep (A): 80-145 bps, 4-45 bps, 4-SET bpsFrequency Shift (S): 1/1 Abruptly Shift, 6/6 AbruptlyShift, 6/6 Ramped,10/10 Abruptly Shift, 10/10 RampedSweep Time: 15 secondsFrequency Shift Percent: Shifts from 30% below setfrequency to 60% above then back to 30% below setfrequency.Output Configuration: Quadra polar (4 electrodes)Wave Form: Symmetrical Balanced Sine WaveInterference Beat Frequency: 4-160 bps; adjustableto 4 bps/step

IF-4250Analog Interferential

Channel: DualPulse Width: 125 microseconds for each phasePulse Amplitude: Adjustable 0-50 mA peak at 500 S/channelCarrier Frequency: 4000 Hz fixedDifference Frequency: (1 +/- 0.5) ~(250+/-10%) HzadjustableInterference Frequency: Channel BAuto Sweep: 4-45 bps, 80-150 bps, 4-setConstant Mode: 4-400 bps, adjustable Waveform: Symmetrical Biphasic SquareFour Frequency Shift: Continuous, 1/1 abrupt,8/8 abrupt, 10/10 ramped

INTERFERENTIAL

Conductive Garments



Iontophoresis Electrodes

Comfort/IO Iontophoresis Electrodesfrom Pepin Manufacturing, Inc.

With over 20 years experience in the electrotherapymarket, we used our technical knowledge to create a highquality iontophoresis system using only the best materialsand most advanced processes.

PMI understands what it takes to make the very bestiontophorresis electrodes and achieves excellence in quality through:

• Buffered Return Electrode with excellent currentdispersion and lower impedance. Larger surface areafor greater comfort during treatment. Buffered gelmaintains optimum pH levels.

• Soft and conformable Buffered Active Electrode withexcellent adhesion to minimize leakage. User-friendlypositioning tabs.

• Available in four sizes to accommodate varyingtreatment sites.

• Competitive pricing.

• Private labeling available on qualified accounts.



SmallCIO15

1.5cc/4.0mA

MediumCIO25

2.5cc/4.0mA

LargeCIO40

4.0cc/4.0mA

ButterflyCIO20

2.0cc/4.0mA

ElectrotherapyAccessories

Rechargeable Batteries9 volt Ni-MH 8.4V . . . . . . . . MH-G9849 volt Nicad 8.4V . . . . . . . . . . . . G-984AA Rechargeable Battery . . . . PMH1800

Charger Units9 volt Battery Charger . . . . . . . . I-7785AA Battery Charger . . . . . . . WY-107UL

Lead Wires44” lead wire set . . . . . . . . . . . W2000

for TENS and EMSBifurcating Lead Wire . . . . . . . . . BI00172” Flex Lead Cable . . . . . . . . . W7200

Snap Adaptors4” Snap Adaptor . . . . . . . . . . . . WSA20

with .080”pin connector

Marketing MaterialsElectrode Placement Chart . . . . EPC100

Pain Relieving GelBioFreeze - 4 oz. tube. . . . . . . . . . . . . . BioFreeze - 3 oz. stick. . . . . . . . . . . . . . BioFreeze - 16 oz. bottle . . . . . . . . . . . .



72” long

44” long

14” long

PEPIN MANUFACTURING INC.

A Diverse Company with an InnovativeTeam Dedicated to Specialization, Quality and Service!



We’re here to serve you - Give us a call!

pepin manufacturing inc. - brown's medical...

Documents