phsautomotivesalsphsautomotivesals autoshop tools
TRANSCRIPT
PHS
AUTOMOTIVE
SALS
AUTOSHOP TOOLS
PHS
AUTOMOTIVE
SALS
TOOLS- What brand should I buy?
PHS
AUTOMOTIVE
SALS
Tool Material- high strength alloy steel, should be light and easy to use in tight quarters, not a bulky tool, slim and properly designed
for your hand.
PHS
AUTOMOTIVE
SALS
• Quality Tools are heated treated.
• Machine to a close tolerance.
• A 3/4 opening is a 3/4.
• Sharp edges are removed.
• Tools are polished
• Good lifetime guarantee.
PHS
AUTOMOTIVE
SALS
In buying tools you get what you pay for
PHS
AUTOMOTIVE
SALS
Tips to Remember• 1. KEEP YOUR TOOLS CLEAN• 2. Separate cutting tools• 3. Lightly oil any tool that might rust• 4. Delicate measuring tools- keep in protective
containers, such as micrometers etc.• 5. Mark your tools with Drivers license.
Put Name & license Number on all tools
PHS
AUTOMOTIVE
SALS
Major brands of Quality hand tools: Snap On, Craftsman, S-K Wayne, Matco, Mac, Proto, Master Mechanic
PHS
AUTOMOTIVE
SALS
When working in the shop
• Always wear safety glasses or a full face shield
PHS
AUTOMOTIVE
SALS
Screw drivers
• Flat blade - conventional - blade should fit slot snug and be the same width
PHS
AUTOMOTIVE
SALS
Screw drivers
• Phillips # 0, 1, 2, 3, 4
PHS
AUTOMOTIVE
SALS
Screw drivers
• Reed and Prince
• clutch
PHS
AUTOMOTIVE
SALS
• Pozidrive
• Allen or Hex tip
Screw drivers
PHS
AUTOMOTIVE
SALS
• Scurlox or Square Drive
• Torx
Screw drivers
PHS
AUTOMOTIVE
SALS
• Tamper Proof Torx
Screw drivers
PHS
AUTOMOTIVE
SALS
• Tamper Proof Allen
Screw drivers
PHS
AUTOMOTIVE
SALS
• Offset
Screw drivers
PHS
AUTOMOTIVE
SALS
• Screwdrivers are classed in size of shank such as 3/16, 1/4, 5/16, and length of shank such as 2", 4", 6". Some manufactures take length of shank and handle. Normally just the shank is measured.
Screw drivers
PHS
AUTOMOTIVE
SALS
• Handles come in different shapes to get better torque on screw
Stubby Screw drivers
PHS
AUTOMOTIVE
SALS
PHS
AUTOMOTIVE
SALS
• Some shanks are square so you may apply a wrench
• Don't misuse you screwdrivers by prying and beating on them
• If you must, have a couple of old beat up ones in your tool box
• If holding small object in hand do not run screwdriver through hand
• Screwdriver handles are not insulated
Screw drivers
PHS
AUTOMOTIVE
SALS
Pliers
• Combination slip joint pliers
• Diagonal side cutters
PHS
AUTOMOTIVE
SALS
Pliers
• Needle nose
• Channel lock or Arc joint (Sears) Snap-on calls them Adjustable Joint
PHS
AUTOMOTIVE
SALS
Pliers
• Linesmen
PHS
AUTOMOTIVE
SALS
Pliers• Locking Pliers or
Vise grips (Brand Name)
• Needle nose Locking Pliers
• Lock ring
PHS
AUTOMOTIVE
SALS
Pliers
• Locking C-Clamp
PHS
AUTOMOTIVE
SALS
Pliers
• Snap ring - internal external
PHS
AUTOMOTIVE
SALS
Pliers
• Spark Plug boot pliers
PHS
AUTOMOTIVE
SALS
Pliers
• Brake pliers
• Hose clamp pliers
PHS
AUTOMOTIVE
SALS
Pliers
• Robo Grip
PHS
AUTOMOTIVE
SALS
Pliers
• Pinch off hose pliers
PHS
AUTOMOTIVE
SALS
Pliers
• Battery pliers
PHS
AUTOMOTIVE
SALS
Pliers
• Battery spreaders
PHS
AUTOMOTIVE
SALS
Pliers
• Wire Strippers and Crimpers
PHS
AUTOMOTIVE
SALS
Hose Grip Pliers
PHS
AUTOMOTIVE
SALS
Punches & Chisels
PHS
AUTOMOTIVE
SALS
Punches
• Aligning punch sometimes called a Long Taper or Line up
• Center punch - use before drilling or to mark metal
PHS
AUTOMOTIVE
SALS
Punches
• Starting punch has a short tapered end
• Drift or Pin punch same size shaft
PHS
AUTOMOTIVE
SALS
Punches
• To sharpen or true Punches and chisels:
• Hold at proper angles and dip often in water, DO NOT let them turn blue
PHS
AUTOMOTIVE
SALS
Punch and Chisel Holder
• Use this so you don’t hit your hand. It does not feel good.
• Thanks Sears for the picture
PHS
AUTOMOTIVE
SALS
Brass Drift Punch Set
PHS
AUTOMOTIVE
SALS
Chisels• Flat Cold chisel: most
common, safety glasses should be worn, make sure cutting edge is sharp. Striking surface or top of chisel should not be mushroomed, it should be smooth with a slight taper.
PHS
AUTOMOTIVE
SALS
Mushroomed chisels
PHS
AUTOMOTIVE
SALS
PHS
AUTOMOTIVE
SALS
Hammers
• Claw Hammer - this is Auto shop not Wood shop
PHS
AUTOMOTIVE
SALS
Hammers - Dead blow
• Dead blow - shot filled, plastic coating
PHS
AUTOMOTIVE
SALS
Hammers - Ball Peen
• Ball Peen - most common General purpose head may weigh 4 oz to several lbs
PHS
AUTOMOTIVE
SALS
Hammers - Rubber Mallet
• Rubber Mallet
PHS
AUTOMOTIVE
SALS
Hammers
• Plastic Tipped - with replaceable tips
• Brass Hammer
• Plastic Tipped
PHS
AUTOMOTIVE
SALS
Tips on Hammer use• 1. Strike face of hammer head squarely• 2. Make sure head is secure on hammer handle
(Hammer Head is wedged on in both directions)
• 3. Never swing hammer in the direction that someone is standing
• 4. Keep handle clean and dry, is handle cracked or broken.
• 5. Use the proper size hammer for the job.
PHS
AUTOMOTIVE
SALS
Wrenches• Wrenches are a way to remove and replace bolts
etc but they are slow use as a last resort you should use air tools or ratchets if at all possible
• (Remember, pull with a wrench you have better control, if you do push, push with palm open.)
PHS
AUTOMOTIVE
SALS
open end
• size is determined by width of opening, end is usually offset 15 degrees, each end is a different size
PHS
AUTOMOTIVE
SALS
• End is totally enclosed in 6 or 12 point openings. Can be double offset or box offset 15 degrees for clearance for hand.
• Comes in different lengths, each end is a different size, good wrench for breaking loose tight bolts
Box end Wrench
PHS
AUTOMOTIVE
SALS
Offset Box end Wrench
Thanks Sears for the picture
PHS
AUTOMOTIVE
SALS
Combination Wrench
• One end open, one end boxed both the same size can be different lengths
PHS
AUTOMOTIVE
SALS
Combination & Box End Wrench
• Boxed ends can be either 6 or 12 point.
PHS
AUTOMOTIVE
SALS
Tubing Wrench - flare nut
• Box type wrench with section cut away. One end sometimes might be open like a combination wrench. Make sure you buy 6pt. – (12pt. are no good they will slip)
PHS
AUTOMOTIVE
SALS
Ratcheting Wrenches
Box end
GearWrench Flex Head Ratcheting Wrench
GearWrench® Combination Wrench
PHS
AUTOMOTIVE
SALS
Ratcheting Wrenches
S Reversible GearWrench Ratcheting Wrench
•Half Moon ReversibleGearWrench®
PHS
AUTOMOTIVE
SALS
Adjustable open end Wrench• Not a replacement for all other wrenches,
discuss proper use, tends to slip. Adjust jaws firmly. Try to always use the correct size wrench. Should only put pressure on the fixed jaw. Also know as a Crescent Wrench.
PHS
AUTOMOTIVE
SALS
Adjustable open end Wrench
PHS
AUTOMOTIVE
SALS
Ignition Wrench
• one end open, one end boxed or both ends open different size at each end
PHS
AUTOMOTIVE
SALS
Distributor wrenches
PHS
AUTOMOTIVE
SALS
Sockets• Sockets come in many sizes with different
openings. 6 pt. & 12 pt. Are the most common
• 8 pt or double square are used on square nuts. Square (4 sided) sockets are also used in special applications
6 point 8 point 12 point
PHS
AUTOMOTIVE
SALS
Drive size common to Automotive are 1/4, 3/8, 1/2, 3/4 - square hole
PHS
AUTOMOTIVE
SALS
• Shallow or Regular size chrome and Impact
Sockets
• deep sockets chrome and Impact
PHS
AUTOMOTIVE
SALS
• Swivel sockets Regular Impact
Swivel Sockets
The socket is attached to the Universal joint
PHS
AUTOMOTIVE
SALS
• extensions
• universal joint – No socket attached
Impact Standard
Sockets
PHS
AUTOMOTIVE
SALS
crowfoot
Crowfoot Sockets
Crowfoot Flare Nut
PHS
AUTOMOTIVE
SALS
• Used to torque down lug nuts to the proper torque when using a impact wrench. The larger the shaft the more torque it will carry.
Torque Stix
PHS
AUTOMOTIVE
SALS
• Look up on the chart for your make and model or if you know the torque look on the chart and find the right torque stix
Torque Stix
PHS
AUTOMOTIVE
SALS
Socket handles
• ratchet - short and long
Swivel Ratchet
½ inch Ratchet
½ inch Long Handle Ratchet
PHS
AUTOMOTIVE
SALS
Socket handles
• speed handle - and swivel speed handle
• flex handle or breaker bar long and short
• sliding T bar
PHS
AUTOMOTIVE
SALS
Socket handles
• Nutdrivers
PHS
AUTOMOTIVE
SALS
Socket handles
• Spinner Handle
Need to add a socket
PHS
AUTOMOTIVE
SALS
Torque wrenches
• beam
• Dial type sometimes referred to as a Micrometer type
PHS
AUTOMOTIVE
SALS
Torque wrenches
Digital
Click style
PHS
AUTOMOTIVE
SALS
Torque wrenches
Split beam torque wrench
Do not torque left hand bolts with this one
PHS
AUTOMOTIVE
SALS
Torque wrenches• Come in inch lbs and foot lbs
• Always look up tightening sequence
• Always look up the amount of Torque
• If large number divide the torque into smaller amounts and torque in steps.
• Pull with a steady pull, do not jerk
• Make sure threads are clean
• Remember that it takes more force to start a fastener then to keep it turning.
PHS
AUTOMOTIVE
SALS
Hack saws• Used to cut metal
• Blade length 8, 10, 12,
• Semi-flexible blades, High speed blades.
PHS
AUTOMOTIVE
SALS
Hack sawsClose quarter Hack saw
PHS
AUTOMOTIVE
SALS
• Teeth per inch (T.P.I.)
• Need at least two teeth on metal
• 14 T.P.I. Large pieces of soft steel
• 18 T.P.I Large pieces of hard tool steel
• 24 T.P.I. Cooper brass, Light angle Iron Tubing, sheet metal
• 32 T.P.I. Thin sheet metal and thin tubing
• Teeth on hack saw go forward
• Learn how to properly hold the hacksaw
Hack saws Blades
PHS
AUTOMOTIVE
SALS
Hack saws Blades
PHS
AUTOMOTIVE
SALS
Hole saw
• Used to cut round holes in thin metal or wood or plastic
PHS
AUTOMOTIVE
SALS
Files
• Single cut - Smooth - fine work
• Double cut - coarse, for faster cut
• Bastard - real coarse
• The number of cuts and the size of the cuts determines the coarseness of the file
PHS
AUTOMOTIVE
SALS
Files
• Single cut - rows of teeth run in one direction
• Double cut - teeth run at an angle to each other
PHS
AUTOMOTIVE
SALS
Shapes of files
• flat, square, round or rat tail, half round, knife edge, 3-square or triangular, point file
PHS
AUTOMOTIVE
SALS
• Use a coarse file for soft metal, it prevents clogging
• Use a file card or wire brush to clean a file
• Use chalk to get rid of oil on a file
• Always use a file handle
Files
File Card
PHS
AUTOMOTIVE
SALS
Rotary files
• good for blind holes
• where a lot of material must be removed
• wear safety glasses
PHS
AUTOMOTIVE
SALS
Gasket Scrapers/Cleanup tools• putty knifes
• Gasket scrapers
• razor blades (not shown)
PHS
AUTOMOTIVE
SALS
Pick up tools
Heavy dutyTelescopingMagnetic Pick up tool
TelescopingMagnet
Flexible FingersPick up tool
PHS
AUTOMOTIVE
SALS
Tin snips / Straight Tinner Snips
PHS
AUTOMOTIVE
SALS
Offset model aviation snips
Left cut model - for cutting straight and tight left curves Right cut model - for cutting straight and tight right curves Straight cut model - for cutting straight and mild curves both left and right
PHS
AUTOMOTIVE
SALS
Telescoping Rectangle Inspection Mirror /and other shapes
PHS
AUTOMOTIVE
SALS
Tri-Square
PHS
AUTOMOTIVE
SALS
Combination Square
PHS
AUTOMOTIVE
SALS
Twist Drills
• Fractional inch size 1/16,1/4, 3/8, 7/16, ½• Letter Size A-Z• Number Size 1-80
• Left hand drill bits cut when going in Reverse
PHS
AUTOMOTIVE
SALS
Twist Drills
PHS
AUTOMOTIVE
SALS
Twist Drills
PHS
AUTOMOTIVE
SALS
Twist Drills
• Shanks - straight • - turned down • - tapered • Types of materials
- carbon steel – Cheap drill bit - high speed steel (HSS) better - Titanium & Cobalt best
• Twist Drill must be sharp
PHS
AUTOMOTIVE
SALS
Drills
• Common sizes 1/4, 3/8, ½ refers to size of chuck or how big of drill bit it will hold.
• Center punch your work,
• use cutting oil except on sheet metal and cast iron.
• Corded and cordless
• Some have keyless chucks
PHS
AUTOMOTIVE
SALS
Drills
Close Quarter Drill, Variable Speed
PHS
AUTOMOTIVE
SALS
Drills Keyless chuck
PHS
AUTOMOTIVE
SALS
Safety Hints• 1. Firm grip on the drill
• 2. Unplug drill before removing or installing drill bit
• 3. Don't wear loose clothing
• 4. Secure the work firmly
• 5. Wear safety glasses
• 6. Make sure drill is properly grounded
• 7. Do not stand on wet surface when using power tools
PHS
AUTOMOTIVE
SALS
Reamers• Used to enlarge or shape holes not for deep
cuts only a few thousandths of an inch at a time.
PHS
AUTOMOTIVE
SALS
Types of Reamers
• Adjustable
• Adjustable with pilot
• Solid - for king pin or valve guides
• Hand use only - not for power tools
PHS
AUTOMOTIVE
SALS
Tap & Dies
• Taps are used to cut internal threads
PHS
AUTOMOTIVE
SALS
• Taper - first 6-8 threads are Chamfered
• Plug - first 3-5 threads are Chamfered
• Bottoming have threads all the way to the Bottom - Does not start well
Types of taps
PHS
AUTOMOTIVE
SALS
taps
PHS
AUTOMOTIVE
SALS
Know these termsTap drill
drill bit that drills a hole for proper amount of threads when using a tap.
Clearance Drilldrill bit that will drill a hole the size
needed to insert bolt with out threading it.
PHS
AUTOMOTIVE
SALS
Refer to the tap drill size chart
Tap wrench
Die Stock
PHS
AUTOMOTIVE
SALS
Dies
Dies are used to cut external threads on stock or bolts
PHS
AUTOMOTIVE
SALS
Finding the right size Tap or Die Use a Thread pitch gauge
National Coarse National FineNC NF
½ x 13 ½ x 20 ½ size of bolt
13 teeth per inch 20 teeth per inch
PHS
AUTOMOTIVE
SALS
Thread pitch gauge
• Used to find how many threads in an inch• come in metric and standard
PHS
AUTOMOTIVE
SALS
Metric Bolts• 10mm x 1.50 x 60mm
• 10mm size of bolt
• 1.50 pitch of thread
• 60mm length of the bolt in millimeters
• Be careful of some, cannot tell apart by naked eye without thread pitch gauge might screw on each other but hard, will strip out the bolt or nut.
• The head of the bolt should have a number on it like 4.8, 8.8 helps you to identify metric bolts.
PHS
AUTOMOTIVE
SALS
Tap and Die rules• Use cutting oil when using Taps and Dies
• Keep Tap square with hole
• Keep backing off Tap to break chips off (1 turn in 1/2 turn back
• Keep Taps and Dies clean and lightly oiled
• Keep Taps in storage box separate from others so you will not damage the cutting edge
• Make sure all the tools are in the box when you return it to the tool room
PHS
AUTOMOTIVE
SALS
Thread chasers and rethreading dies can be used only to repair
damaged threads
PHS
AUTOMOTIVE
SALS
Screw Extractors
• For removing broken screws and studs
• first center punch broken bolt, lube with W.D. 40 to loosen bolt, drill out with largest size drill with out damaging threads all the way through, then insert screw extractor
• square shank - hit with hammer
• spiral - will twist in and grab
PHS
AUTOMOTIVE
SALS
Thread repair
• Heli Coil EZ-LOK
PHS
AUTOMOTIVE
SALS
Solder Guns
PHS
AUTOMOTIVE
SALS
Soldering• If solder gun does not work do these three things
• 1. Tighten the nuts, the screw or allen set screw on the soldering tip. (do not over tighten as it gets hot then cold it will expand then contract these will always come lose)
• 2. Clean and sand the tip of the solder gun
• 3. Tin the tip of the solder gun
PHS
AUTOMOTIVE
SALS
Solder Guns
PHS
AUTOMOTIVE
SALS
Types of Solder
• Rosin core – electrical work - wiring– The rosin is flux, which cleans as you solder.– 50/50 50% tin 50% Lead melts at 425 degs– 60/40 60% tin 40% Lead melts at 425 degs– 63/37 63% tin 37% Lead melts at 425 degs
• Acid core - radiators
PHS
AUTOMOTIVE
SALS
Pullers
• Two jaw
• Three jaw
PHS
AUTOMOTIVE
SALS
Pullers
• Steering wheel
• Harmonic balance puller
PHS
AUTOMOTIVE
SALS
Pullers
• Slide hammer and attachments
PHS
AUTOMOTIVE
SALS
Hones• wheel cylinder (Drum Brake)
• disc brake caliper
• glaze breaker
• cylinder hone
PHS
AUTOMOTIVE
SALS
Ring Compressor
• ring compressors
PHS
AUTOMOTIVE
SALS
Ring Expander
• ring expanders
PHS
AUTOMOTIVE
SALS
valve spring compressors
• valve spring compressors
PHS
AUTOMOTIVE
SALS
Brake spoon & Spanner wrench• brake spoons
• spanner wrench
PHS
AUTOMOTIVE
SALS
• bushing drivers
• bearing packer
Bushing driver & Bearing Packer
PHS
AUTOMOTIVE
SALS
• Grease Gun
Grease Gun
PHS
AUTOMOTIVE
SALS
• Seal pullers Seal installers
Seal Puller & Installer
PHS
AUTOMOTIVE
SALS
Hand Impact
• Used to remove stubborn screws
• insert right size bit turn in direction you want to go and strike with a hammer.
PHS
AUTOMOTIVE
SALS
Measuring tools
• feeler gauge - flat
• round or wire
PHS
AUTOMOTIVE
SALS
Measuring tools
• Feeler gauge flat & round
PHS
AUTOMOTIVE
SALS
Measuring tools Calipers
• Outside inside
• dial
PHS
AUTOMOTIVE
SALS
• Dial indicator
• Straight edge - .003 max (not shown)
• Telescoping gauge
• Small hole gauge
Measuring tools
PHS
AUTOMOTIVE
SALS
Micrometer
• name of parts• reading mikes
• Inside micrometer
• See power point on micrometers
PHS
AUTOMOTIVE
SALS
Test Light
• Use to test for power
PHS
AUTOMOTIVE
SALS
The End for now
• Thanks to Sears, Grainger KD Tools and Goodheart- Willcox for some of the pictures