product catalog - rm biltrite...rm biltrite® customers service many industries and include gasket...

Product Catalog

2 T: 800.877.8775 | F: 888.894.0204 [email protected] | RMBiltrite.com

Distribution Centers

Chelsea, MA

North Haven, CT

La Grange, KY

Atlanta, GA

Orlando, FL

Butte, MT

Denver, CO

San Bernardino, CA

Columbus, OH

Factory/Warehouse

Factory/Warehouse

RM Biltrite® is a leading manufacturer of thermoplastic sheets and matting and a distributor of rubber sheeting, matting & flooring, injection molding, and a wide variety of specialty rubber and thermoplastic products.

RM Biltrite® specializes in design, development, and contract manufacturing of a large assortment of plastic and rubber products. Our products have numerous applications and are used extensively in a variety of industries, including:

• Automotive • Mining • Construction • OEM • Electrical Safety

• Trucking • Chemical • Flooring • Roofing • Agriculture

RM Biltrite® customers service many industries and include gasket cutters, distributors, industrial supply retailers, and wholesalers.

Since 1986, RM Biltrite® has continued to offer quality products at competitive prices. We maintain strong relationships with customers through exceptional, personalized service and support.

Based in Sandy Springs, Georgia, just north of Atlanta, RM Biltrite® owns and operates a manufacturing facility in Chelsea, Massachusetts, and has international offices in The Netherlands, China, India, and Thailand. RM Biltrite® also maintains nine distribution centers in the United States, and a European distribution center in The Netherlands.

Please visit www.rmbiltrite.com for more information. For questions or to place an order call 800.877.8775 or email [email protected]

3

TABLE OF CONTENTS

›› Introduction 2

›› Thermoplastics Section 4› Vinyl Matting

• Diamond 5• Eldorado 5• Easy Sweep 5• Corrugated 5• Pyramid 5

› Vinyl Switchboard Matting• Type II -class 1 6• Type II -class 2 6

› Military Electrical Grade (MEG) Vinyl Switchboard Matting

• Type I 7• Type II 7• Type III 7

› Electrostatic Discharge (ESD) Matting• Stipple Single Layer 8• Stipple Dual Layer 8• Diamond Dual Layer 8

› Conductive Matting• Stipple Finish 9• Stipple Finish 9

› TPO Walkway• Herringbone 10• Diamond 10

› PVC Walkway• Herringbone 11• Pyramid 11

› Mass Loaded Vinyl (MLV)• 0.50 Pound 12• 0.75 Pound 12• 1.00 Pound 12• 1.50 Pound 12• 2.00 Pound 12

› Commercial Kitchen Flooring• Stipple Finish 12

›› Sheet Rubber Section 13› Neoprene Rubber Grade 1

• Style # 121 14› Blended Rubber

• Style # 110 - Economy Blended Rubber 15• Style # 125 - Commercial Blended Rubber 15• Style # 130 - High-Tensile Blended Rubber 15

› Nitrile Grade 1• Style # 201 16• Style # 221 - FDA Grade 1 - White 16

›› Sheet Rubber Section - continued› EPDM Grade 1

• Style # 301 17› Natural Rubber (NR) FDA Grade 1

• Style # 441 17› Cloth-Inserted (CI): SBR & Neoprene

• Style # 510 18• Style # 530 18• Style # 550 18

› Silicone• Style # 715 19• Style # 735 19

› Masticated Rubber• IR910 - Smooth 20• IR912 - Pebble 20• IR914 - Ribbed 20

› Rubber Matting• IR900 - Corrugated 21• IR950 - Nu-Grip® 21• IR951- Diamond 21• IR952 - Gemstone 21• IR954 - Pebble 21

›› Mining & Aggregate Section 22› Neoprene Bonding Layer 23› Super Heavy-Duty Anti-Abrasion rubber

• M1300-38 - Super 38 24• M1350-38 - Super 38 Pro 24• M1300-60 - Super 60 24• M1300-50 - Super 50 24• M1300-70 - Super 70 24• M1200-35 - Super 35 24

› Pro-Wear Anti-Abrasion Rubber• M2050-40 - Pro Wear 40 ECO 25• M2000-40 - Pro Wear 40 25• M2000-50 - Pro Wear 50 25• M2050-60 - Pro Wear 60 ECO 25• M2000-60 - Pro Wear 60 25

› Skirtboard Rubber• M3004-65 - Skirtboard 604 26• M3006-65 - Skirtboard 606 26• M3010-65 - Skirtboard 610 26• M3100-45 - Skirtboard 620 26• M3100-65 - Skirtboard 630 26

›› Material Information › Rubber Manufacturing Tolerances 27› Rubber Operating Temperatures 27› Polymer Selection Criteria 27

›› Terms & Conditions 28

T: 800.877.8775 | F: 888.894.0204 [email protected] | RMBiltrite.com

4

THERMOPLASTIC PRODUCTS

› Tuff Trac® Vinyl Matting • Diamond, Eldorado, Easy Sweep, Corrugated, Pyramid 5 › Tuff Trac® Vinyl Switchboard Matting • Type II Class 1, Type II Class 2 6 › Tuff Trac® Military Electrical Grade (MEG) Vinyl Switchboard Matting • Type I, Type II, Type III 7 › Tuff Trac® Electrostatic Discharge (ESD) Matting • Single Layer, Dual Layer 8 › Tuff Trac® Conductive Matting • Stipple, Diamond 9 › Tuff Trac® TPO Walkway • Herringbone, Diamond 10 › Tuff Trac® PVC Walkway • Herringbone, Pyramid 11 › Tuff Trac® Mass Loaded Vinyl (MLV) • 0.50 LB, 0.75 LB, 1.00 LB, 1.50 LB, 2.00 LB 12 › Tuff Trac® Commercial Kitchen Flooring • Stipple 12

Made in the

USA


5

Physical Properties: ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D300, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible. THE WARRANTIES SET FORTH IN THIS PROVISION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING WARRANTIES ARISING FROM COURSE FOR DEALING OR USAGE OF TRADE. SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED, OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. ALL PRODUCTS ARE SOLD AND WARRANTED ONLY PURSUANT TO OUR PUBLISHED TERMS AND CONDITIONS OF SALES. WE ARE NOT RESPONSIBLE FOR THE USER FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES RESULTING FROM PRODUCT USE OR PROCESSING. IN NO CIRCUMSTANCES WILL SELLER’S LIABILITY EXCEED THE PURCHASE PRICE OF THE GOODS. Thermoplastics Products: All thermoplastic products are a proprietary blend of plastics and other components. In any application, the customer should evaluate the performance requirements and conditions that will affect the working life of the thermoplastic product. Where appropriate, field tests may need to be performed before the type of thermoplastic is selected. If the customers’ quality assurance includes the testing of thermoplastic materials, the test criteria should specify the physical property of the ASTM specification that is most critical to its application. Polymer type alone may not be adequate for the selection of the thermoplastic that is best suited for a specific application. PRODUCTS SUITABILITY AND LENGTH OF USE: Buyer acknowledges the use of its own knowledge, expertise, skill, experience and judgment in the selection of products(s) and /or in the selection, provision, or designation of any specifications or set of specifications for a product(s) agreed upon by the Buyer and Seller. Buyer acknowledges that Seller shall not be liable for, and Buyer assumes all risk of, inaccurate or unsuitable specifications or information provided, selected, or designed by the Buyer. RM BILTRITE® LLC MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE SUITABILITY OF MATERIALS FOR A PARTICULAR PURPOSE. BUYERS AND USERS MUST DETERMINE THE SAFETY AND SUITABILITY OF RM BILTRITE® LLC’S PRODUCTS FOR THEIR OWN PURPOSES, AND ASSUME ALL RISK, RESPONSIBILITY, AND LIABILITY FOR ALL INJURIES, LOSSES, OR DAMAGES ARISING FROM THE APPLICATION OF THE INFORMATION OR USE OF RM BILTRITE® LLC’S PRODUCTS, WHETHER OR NOT CAUSED BY RM BILTRITE® LLC’S NEGLIGENCE OR BASED ON STRICT PRODUCT LIABILITY. PRODUCT COMPOSITION AND CUSTOMER RESPONSIBILITY: Our products are a proprietary blend of various polymers formulated to meet stated physical characteristics and specifications. The named product polymer is not necessarily the primary polymer representing the highest percentage of the polymer blend. Determination of the suitability of the goods for the uses and applications contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. Please ensure the product meets your application specification before order placement. No guaranty is given with respect to length of service on any application. Suggestions or recommendations made by Seller in its product literature concerning uses or applications of the goods are believed to be reliable, but Seller makes no warranty or guaranty of results to be obtained since the conditions of use and application by Buyer and others are beyond Seller’s control. Product specifications are subject to change without notice. In all cases, the website version prevails. Terms and conditions are available upon request.

RM Biltrite® Tuff Trac® Vinyl Matting is manufactured from a proprietary blend of new and recycled materials. This blend is engineered to provide outstanding performance and superior durability during use.

Vinyl Matting creates a comfortable and safe environment for employees in workplaces where slip and wear protection is important, such as manufacturing, healthcare, and warehousing industries. Also good for use in public areas with normal and heavy foot traffic. Available in five different finishes:

Diamond Finish: Commercial grade vinyl runner with a deeply embossed, steel-deck diamond surface finish. Textured cloth impression back finish. Available with an optional yellow safety edge.

Easy Sweep Finish: Round-ribbed, high-traction corrugated surface finish running lengthwise to the mat. Textured cloth impression back finish.

Pyramid Finish: Textured, non-directional, pyramid-shaped surface finish offering excellent anti-slip traction in dry or wet conditions. Textured cloth impression back finish.

Eldorado Finish: Unique, proprietary surface finish designed for light-duty anti-slip applications. Smooth back finish.

Corrugated Finish: Durable runner with an angular, pointed, high-traction corrugated surface finish running lengthwise to the mat. Textured cloth impression back finish.

Made in the

USA

*Optional yellow safety edge available.

TECHNICAL SPECIFICATIONS DIAMOND EASY SWEEP PYRAMID ELDORADO CORRUGATEDThickness 5/32”( 4.0 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) .075" (1.9 mm) 1/8” (3.2 mm)Length 75' (22.9 m) 105' (32.0 m) 105' (32.0 m) 105' (32.0 m) 105' (32.0 m)

Durometer Hardness (Shore A) 80.0 ± 5 80.0 ± 5 80.0 ± 5 80.0 ± 5 80.0 ± 5

Tensile Strength (min) 600 psi (4.1 MPa) 600 psi (4.1 MPa) 600 psi (4.1 MPa) 600 psi (4.1 MPa) 600 psi (4.1 MPa)

Elongation (min) 150% 150% 150% 150% 150%

Tear Resistance 100 lbf/in (17.5 kN/m) 100 lbf/in (17.5 kN/m) 100 lbf/in (17.5 kN/m) 100 lbf/in (17.5 kN/m) 100 lbf/in (17.5 kN/m)

Surface Finish / Back FinishDiamond / Textured

Cloth ImpressionEasy Sweep / Textured

Cloth ImpressionPyramid / Textured Cloth

Impression Eldorado / SmoothCorrugated / Textured

Cloth Impression

Surface Lining Film Film Film Film Film

Color Black* Black Black Black Black

PYRAMIDELDORADO CORRUGATEDEASY SWEEPDIAMOND

TUFF TRAC® VINYL MATTING - DIAMOND, ELDORADO, EASY SWEEP, CORRUGATED, PYRAMID

Standard Widths: 24” - 60” (60 cm - 150 cm)Custom sizes available upon request.


6

RM Biltrite® Tuff Trac® Insulative Switchboard Matting protects employees from electrical shock by interrupting the electrical path-to-ground. Perfect for use in high voltage areas and around high voltage equipment. Tuff Trac® switchboard matting is made from PVC and comes with a corrugated top finish and a cloth bottom finish. All matting is branded on the back per ASTM specification.

RM Biltrite® has over forty years of experience researching, manufacturing, and testing both rubber and vinyl switchboard matting. Extreme testing is performed on every production batch to confirm the formula delivers a higher margin of safety up to 50,000 VAC.

Tuff Trac® Switchboard Matting can be used with power boards, electrical rooms, transformer stations, switching gear, bucket floors, mines, subways, or any other high voltage area. Available in two classes:

Type II, Class 1: For areas with standard dielectric insulation requirements. Verified for dielectric resistance to 20,000 VAC per ASTM D178.

Type II, Class 2: For areas with higher dielectric insulation requirements. Verified for dielectric resistance to 30,000 VAC per ASTM D178.

Tuff Trac® Switchboard Matting is also available in military specification grade MIL-DTL-15562, currently used by the U.S. Navy.

Made in the

USA

sTuff Trac® Type II Switchboard Matting is proof tested to 50,000 volts

BLACK

Custom widths, lengths, and colors available upon request.

TECHNICAL SPECIFICATIONS SWITCHBOARD TYPE II CLASS 1 SWITCHBOARD TYPE II CLASS 2Thickness 3/16” (4.8 mm) 1/4” (6.4 mm)Length 75' (22.9 m) 75' (22.9 m)

Tensile Strength 800 psi (5.5 MPa) 800 psi (5.5 MPa)

Elongation 150% 150%

Flame Resistance After 30 Seconds 0.5" (1.3 cm) 0.5" (1.3 cm)

Dielectric Test Voltage 20,000 VAC 30,000 VAC

Proof Tested 10,000 VAC 20,000 VAC

Recommended Maximum Use 7,500 VAC 17,000 VAC

Surface Finish / Back Finish Corrugated / Cloth Impression Corrugated / Cloth Impression

Surface Lining Film Film

Color Black Black

TUFF TRAC® VINYL SWITCHBOARD MATTING - TYPE II CLASS 1, TYPE II CLASS 2



7

TUFF TRAC® MILITARY ELECTRICAL GRADE SWITCHBOARD MATTING - TYPE 1, TYPE 2, TYPE 3

RM Biltrite® Tuff Trac® Military Electrical Grade (MEG) Switchboard Matting is manufactured with a combination of flame retardants and smoke suppressants to meet stringent flame and smoke density standards required for MIL-DTL-15562G specifications. All military grade rolls are marked on the backside with the specification, month, and year of manufacture to guarantee compliance with MIL-DTL-15562G requirements.

Type I: Smooth sheet; comes in a marbleized beige, black*, blue, green, gray, and terra cotta color. Typically used as floor covering for glue down installations in high voltage areas. It can be installed with heat or chemically sealed seams to create a watertight protective surface.

Type II: Smooth runner; comes in beige, black*, blue, green, gray, and terra cotta color. Designed for single strip use as portable floor mats around electrical devices or electrical areas. Provides the same insulation and fire/smoke resistance as Type I.

Type III: Mat/runner with raised diamond plate finish; comes in beige, black*, blue, green, gray, and terra cotta color. Designed to be used as a removable runner around electrical equipment or areas where electrical hazards may exist. Provides extra slip protection and the same insulation and fire/smoke resistance as Type I.

*Note: Black is not authorized for use aboard submarines

Berry Amendment Compliant

TYPE IISMOOTH

TYPE IMARBLEIZED

TYPE IIIDIAMOND

Made in the

USA

*Note: Black is not authorized for use aboard submarines. **Colors other than standard are special order. Custom widths, lengths, & colors available upon request.

TECHNICAL SPECIFICATIONS MEG TYPE I MEG TYPE II MEG TYPE IIIThickness 1/8” (3.2 mm) 1/8” (3.2 mm) 3/16” (4.8 mm)Width 36" (91.4 cm) 36" (91.4 cm) 36" (91.4 cm)

Length 75' (22.9 m) 75' (22.9 m) 75' (22.9 m)

Durometer 95 ± 5 75 (min) 65 (min)

Tensile Strength 800 psi (5.5 MPa) 800 psi (5.5 MPa) 800 psi (5.5 MPa)

Elongation 75% 100% 100%

Permanent Set 25% 25% 25%

Dielectric Test Voltage 30,000 VAC 30,000 VAC 30,000 VAC

Proof Tested 15,000 VAC 15,000 VAC 15,000 VAC

Recommended Maximum Use 3,000 VAC 3,000 VAC 3.000 VAC

Dimensional Stability 0.02 in/ft (0.17 cm/m) ± 0.25 in/ft (2.10 cm/m) ± 0.25 in/ft (2.10 cm/m) ±

Surface Gloss Level 50 - -

Cut Sheet Runner Mat/Runner

Surface Finish / Back Finish Smooth Marbleized / Stipple Smooth / Stipple Raised Diamond Plate / Textured Cloth Impression

Surface Lining Film Film Film

Standard Color Beige Blue Green

Custom Colors**Black*, Blue,

Green, Gray, Terra CottaBeige, Black*,

Green, Gray, Terra CottaBeige, Black*, Blue,

Gray, Terra Cotta



8

SINGLE LAYER ESD

Made in the

USA

Conductive PVC layer

Staticdissipative

top layer

Continuous path to ground for rapid dissipation

DUAL LAYER ESD

Custom sizes & colors available upon request.

TECHNICAL SPECIFICATIONS STIPPLE SINGLE LAYER STIPPLE DUAL LAYER DIAMOND DUAL LAYERThickness 0.06" (1.5 mm) 0.06" (1.5 mm) 5/32” (4.0 mm)Length 50' (15.2 m) 50' (15.2 m) 75' (22.9 m)

Tensile Strength 1000 psi (6.9 MPa) 1000 psi (6.9 MPa) 1000 psi (6.9 MPa)


Surface Wear Resistance - Taber, H–18 wheel/500 gr./1000 rev. Very Good Very Good Excellent

Dimensional Stability Excellent Excellent Excellent

Resistance to Top (RTT/Face) - ANSI/ESD S4.1-2005 108 - 109 - -

Resistance to Ground (RTG/Face) - ANSI/ESD S4.1-2005 - 106 - 108 -

Resistance to Ground (RTG/Face) - ANSI/ESD S7.1-2005 - - 106 - 108

Ozone Resistance Pass Pass Pass

Recommended Use Table Table, Shelf Floor

Surface Finish / Back Finish Stipple / Smooth Stipple / Smooth Diamond / Textured Impression


Color Blue, Gray Blue, Gray Black

TUFF TRAC® ELECTROSTATIC DISCHARGE (ESD) MATTING - SINGLE LAYER, DUAL LAYER

Single Layer Standard Widths: 24" (60.9 cm), 30" (76.2 cm), 36" (91.4 cm), 48" (121.9 cm)Dual Layer Standard Widths: 24” (60.9 cm), 30” (76.2 cm), 36” (91.4 cm), 48” (121.9 cm)Custom sizes & colors available upon request.

RM Biltrite® Tuff Trac® ESD Matting is engineered to protect personnel, equipment, and products from harmful electrostatic discharge caused by accidental contact, short-circuiting, or dielectric breakdown. Unguarded electrostatic discharge can lead to hazardous sparks, fire, and greater damage. ESD Matting also provides anti-fatigue properties. Available in two types:

Single Layer ESD Matting: Manufactured with a proprietary mixture of polymers and homogeneously dispersed migratory anti-static components. The polymers decrease dissipation speed, while the anti-static components continually migrate to the surface. Single Layer ESD Matting has high hydrophilic properties, ensuring a micro-thin surface layer of water to assist with the flow of static charge. Matting delivers an electrical resistance of 108 -109.

Dual Layer ESD Matting: Manufactured by permanently bonding Single Layer ESD Matting to a 6 mm conductive PVC backside layer. This bonding process produces an improved electrical rating of 106 -108, making the matting surface less hydrophilic and less dependent on room humidity.



9

TUFF TRAC® CONDUCTIVE MATTING - STIPPLE, DIAMOND

RM Biltrite® Tuff Trac® Conductive Matting offers excellent anti-static protection for personnel, equipment, and products. It is engineered for use in environments with exposure to higher electrical charges and rapid rates of decay/dissipation. Matting products also provide additional foot comfort and anti-fatigue properties.

Tuff Trac® Conductive Matting is a necessary element to keeping electronics with sensitive components such as cash registers, computers, and machinery, safe from static damage. The matting prevents static charge from reaching vulnerable internal parts like computer chips, circuits, and motherboards.

Tuff Trac® Conductive Matting is manufactured from a homogeneously compounded mixture of PVC vinyl and conductive raw material. All conductive matting products are fabricated to ANSI/ESD S7. 1-2005 standards and test in the optimal electrical rating range of 104 -106. Matting must be used with grounding clips to ensure proper safety and performance. It comes in stipple and diamond finishes (the latter is available with optional yellow safety edge).

Made in the

USA

STIPPLE DIAMOND

*Optional yellow safety edge available. Custom sizes available upon request.

TECHNICAL SPECIFICATIONS STIPPLE FINISH DIAMOND FINISHThickness 3/32” (2.4 mm) 5/32” (4.0 mm)Length 75' (22.9 m) 75' (22.9 m)

Tensile Strength 800 psi (5.5 MPa) 800 psi (5.5 MPa)


Surface Wear Resistance - Taber, H–18 wheel/500 gr./1000 rev. Good Good

Dimensional Stability Excellent Excellent

Resistance to Ground (RTG/Face) - ANSI/ESD S7.1-2005 104 - 106 104 - 106

Ozone Resistance Pass Pass

Recommended Use Floor Floor

Surface Finish / Back Finish Stipple / Smooth Diamond / Textured Cloth Impression


Color Black Black*



10

TUFF TRAC® TPO ROOF WALKWAY - HERRINGBONE, DIAMOND

RM Biltrite® Tuff Trac® TPO Roof Walkway is a safe, simple, and economical way to protect roofs from damage caused by foot traffic, maintenance, and rooftop equipment. It protects the roof membrane by cushioning impact, absorbing shock, and acting as a barrier from outside elements. Perfect to use as walkways for workers accessing air conditioning, water supply, or electrical equipment.

Tuff Trac® TPO Roof Walkway is specifically engineered for outdoor use. It is manufactured with a unique fibrous mixture and will neither expand nor contract due to temperature or weather. TPO Roof Walkway is compatible with both new and existing single-ply TPO roof membranes and can be easily installed using standard hot-air welding equipment.

Tuff Trac® TPO Roof Walkway products are environmentally friendly and 100% recyclable. The specialized TPO formula is also certified for anti-fire and anti-slip resistance at the highest levels- approved by German, British, European, and USA standards. Available in the following anti-slip finish:

Herringbone-Embossed Pattern: Provides excellent protection and good slip reduction. Good for use on roofs with normal slip risk. Available in gray and white. Also available with an optional with yellow safety edge.

TPO Roof Walkway can be used for protection next to roof access points (ladders, hatches, doorways), maintained rooftop equipment, and window washing equipment.

Made in the

USA

TECHNICAL SPECIFICATIONS HERRINGBONE FINISH DIAMOND FINISHThickness 5/32” ± 0.01" (3.968 mm ± 0.025 mm) 0.17" ± 0.01" (4.318 mm ± 0.025 mm)Width 30" (76.2 cm) 34" (86.4 cm)

Length 50' (15.2 m) 50' (15.2 m)

Tear Resistance 250.1 lbf/ft (43.8 kN/m) 250.1 lbf/ft (43.8 kN/m)


Accelerated Weathering 4797 ft-lb/in2 (10,080 kj/m2) 4797 ft-lb/in2 (10,080 kj/m2)

Pendulum Test (Slip Resistance) 84/46 -

Ramp Test (Anti-Slip) R9 -

Displacement Test V10 (16 cm3/dm2) -

Fire Resistance Test E -

Surface Finish / Back Finish Herringbone / Smooth Diamond / Smooth


Color Gray*, White* Gray**, White**

*Optional yellow safety edge available**Comes standard with flat yellow safety edge Custom sizes available upon request.

GRAYHERRINGBONE

WHITEHERRINGBONE

WHITEDIAMOND

GRAYDIAMOND



11

TUFF TRAC® PVC ROOF WALKWAY - HERRINGBONE, PYRAMID

RM Biltrite® Tuff Trac® PVC Roof Walkway is a safe, simple, and economical way to protect roofs from damage caused by foot traffic, maintenance, and rooftop equipment. It protects the roof membrane by cushioning impact, absorbing shock, and acting as a barrier from outside elements. Perfect to use as walkways for workers accessing air conditioning, water supply, or electrical equipment.

Tuff Trac® PVC Roof Walkway is specifically engineered for outdoor use. It is manufactured with a unique fibrous mixture and will neither expand nor contract due to temperature or weather. PVC Roof Walkway is compatible with both new and existing single-ply PVC roof membranes and can be easily installed using standard hot-air welding equipment.

Tuff Trac® PVC Roof Walkway products are environmentally friendly and 100% recyclable. The specialized PVC formula is also certified for anti-fire and anti-slip resistance at the highest levels- approved by German, British, European, and USA standards. Available in two anti-slip finishes:

Herringbone-Embossed Pattern: High profile finish. Provides excellent protection, better traction, and superior slip reduction. Engineered for roofs with sustained heavy foot traffic and continuous impact from dropped tools and equipment edges. Available in gray and yellow.

Pyramid-Embossed Pattern: Low profile finish provides good protection and slip reduction. Good for use on roofs with normal slip risk, traffic, and servicing. Available in light gray, white, and yellow.

PVC Roof Walkway can be used for protection next to roof access points (ladders, hatches, doorways), rooftop equipment, and window washing equipment.

Made in the

USA

TECHNICAL SPECIFICATIONS HERRINGBONE FINISH HERRINGBONE FINISH PADS PYRAMID FINISH Thickness 5/32” ± 0.01" (3.968 mm ± 0.025 mm) 1/4” ± 0.01" (6.350 mm ± 0.025 mm) 0.09" ± 0.01" (2.286 mm ± 0.025 mm)Width 30" (76.2 cm) 24" (60.9 cm) 30" (76.2 cm)

Length 50' (15.2 m) 48" (121.9) 50' (15.2 m)

Tear Resistance 250.1 lbf/ft (43.8 kN/m) > 250.1 lbf/ft (43.8 kN/m) 250.1 lbf/ft (43.8 kN/m)


Accelerated Weathering 4,797 ft-lb/in2 (10,080 kj/m2) 4,797 ft-lb/in2 (10,080 kj/m2) Pass @ 5.000 Hrs

Pendulum Test (Slip Resistance) 84/46 84/46 -

Ramp Test (Anti-Slip) R9 R9 -

Displacement Test V10 (16,0 cm3/dm2) V10 (16,0 cm3/dm2) -

Fire Resistance Test E E -

Surface Finish / Back Finish Herringbone / Smooth Gray: Herringbone / ClothYellow: Herringbone / Smooth Pyramid / Smooth


Color Gray, White, Yellow Gray, Yellow Gray, White, Yellow

YELLOWHERRINGBONE

YELLOWPYRAMID

WHITEHERRINGBONE

WHITEPYRAMID

GRAYHERRINGBONE

GRAYPYRAMID



12

TUFF TRAC® MASS LOADED VINYL - .05 LB, .75 LB, 1.0 LB, 1.5 LB, 2.0 LB

RM Biltrite® Tuff Trac® Mass Loaded Vinyl (MLV) provides excellent, reliable noise reduction by actively blocking sound wave transmission. RM Biltrite® manufactures MLV from a specialized combination of acoustical PVC plastic and inert material, a safer and more viable product than traditional lead-based soundproof sheeting.

Tuff Trac® MLV is highly flexible and well-suited for a variety of applications in the automotive, industrial, and construction industries. It is easy to install and can be stapled, screwed, nailed, or hung (using reinforcement grommets) behind ceilings, walls, flooring, and more. RM Biltrite® manufactures all MLV barrier products to meet Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302) specifications for fire safety. MLV is available in 0.50 lb, 0.75 lb, 1.00 lb, 1.50 lb, and 2.00 lb weights.

Tuff Trac® MLV products can be customized with additional, application-specific layers. Cloth reinforcement is available for increased tensile strength, crucial for securely hanging with grommets. For outdoor and temperature-sensitive areas, MLV can be applied with a Mylar polyester film layer to improve reflectivity and heat resistance. A clear film layer can also be applied to prevent accidental plasticizer migration.

RM Biltrite® also manufactures a specialized E84 Class-A MLV barrier in white and black: Engineered for utilization in high-temperature areas where superior flame and smoke resistance is crucial.

Made in the

USA

Custom sizes available upon request

TUFF TRAC® MASS LOADED VINYLWeights Width x Length

Finish ColorU.S. Metric U.S. Metric

0.50 lb/ft2 2.3 kg/m2

48" x 25'or

54" x 30'

122 cm x 7.6 mor

137 cm x 9.1 mSmooth Black

0.75 lb/ft2 3.7 kg/m2

1.00 lb/ft2 4.9 kg/m2

1.50 lb/ft2 7.3 kg/m2

2.00 lb/ft2 9.8 kg/m2Frequency (Hz) where STC = 26 (1 lb rating)

Tran

smis

sion

Lo

ss (

dB)

Transmission Loss Sound Transmission Loss Contour

TUFF TRAC® COMMERCIAL KITCHEN FLOORING

RM Biltrite® Tuff Trac® Commercial Kitchen Flooring provides safety in commercial kitchens and other work environments where floor protection, slip resistance, and easy cleaning is essential. The PVC material does not absorb water and is resistant to many chemicals found in industrial areas. PVC is also resistant to bacteria and mold and is flame and smoke retardant.

Resistant to: Acrylic Paint, Ammonium Hydroxide, Ammonium Chloride, Animal Fat, Ammonium Sulfate, Benzoic Acid, Bleach, Butyric Acid, Calcium Chloride, Citric Acid, Detergent Solution, Diluted Sulfuric Acid, Ethyl Alcohol, Formaldehyde, Hydrogen Peroxide, Kerosene, Lacquer Spray Paint, Latex Paint, Malic Acid, Methyl Alcohol, Mineral Oil, Salt Water, Sodium Hydroxide, Sodium Hypochlorite, Succinic Acid, Trichloroacetic Acid, Vegetable Oil, and more.

Applications: Commercial kitchens, coolers, and freezers used in universities, fast food restaurants, full-service restaurants, retirement facilities, and more.

STIPPLE

Custom sizes available upon request

COMMERCIAL KITCHEN FLOORINGThicknesses

Polymer Finish Back ColorU.S. Metric

1/4" 6.4 mm PVC Stipple Textured Gray



13

SHEET RUBBER PRODUCTS

› Rubbermax® Neoprene Rubber Grade 1 • Style #121 14 › Flexgard® Blended Rubber • Style # 110, Style #125, Style #130 15 › Rubbermax® Nitrile FDA Grade 1 • Style #201, Style #221 16 › Rubbermax® EPDM Grade 1 • Style #301 17 › Rubbermax® Natural Rubber (NR) FDA Grade 1 • Style #441 17 › Flexgard® Cloth Inserted (CI) • Style #510, Style #530, Style #550 18 › Flexgard® Silicone • Style #715, Style #735 19 › Rubbermax® Masticated • Style # 910, Style #912, Style #914 20 › Flexgard® Rubber Matting • Corrugated, Diamond, Nu-Grip®, Gemstone, Pebble 21

®RUBBER


14

RUBBERMAX® NEOPRENE RUBBER GRADE 1 - STYLE #121

TECHNICAL SPECIFICATIONS RUBBERMAX® NEOPRENE RUBBER GRADE 1- STYLE #121Item ID IR121-40 IR121-50 IR121-60 IR121-70 IR121-80

Durometer Hardness (Shore A) 40 ± 5 50 ± 5 60 ± 5 70 ± 5 80 ± 5

Tensile Strength 1000 psi (6.9 MPa) 1000 psi (6.9 MPa) 1000 psi (6.9 MPa) 1000 psi (6.9 MPa) 1000 psi (6.9 MPa)

Elongation 400% 300% 300% 200% 100%

Compression Set - 22 Hrs @ 100 °C 80% 80% 80% 80% 80%

Volume Swell - 70 Hrs @ 100 °C in ASTM Oil 903 120% 120% 120% 120% 120%

Temperature Range-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

Grade (ASTM D2000 1BC) Grade 1 Grade 1 Grade 1 Grade 1 Grade 1

Surface Finish / Back Finish Smooth / Smooth Smooth / Smooth Smooth / Smooth Smooth / Smooth Smooth / Smooth

Surface Lining Film No Talc or Film No Talc or Film No Talc or Film No Talc or Film

Color Black Black Black Black Black

Standard Thicknesses: 1/16” (1.6 mm), 3/32” (2.4 mm), 1/8” (3.2 mm), 3/16” (4.8 mm), 1/4” (6.4 mm), 3/8” (9.5 mm)), 1/2” (12.7 mm), 3/4” (19.1 mm), & 1” (25.4 mm)Standard Widths: 36" (91.4 cm) & 48" (121.9 cm)Custom sizes available upon request.

RM Biltrite® Rubbermax® Neoprene is popular due to its unique combination of properties and has led to its use in thousands of applications in diverse environments. Neoprene is a polymer that provides moderate oil & gasoline resistance, very good resistance to ozone & sunlight, excellent adhesion to fabric & metals, good resistance to abrasion & flex cracking, and very good resistance to alkalis & acids.

Style #121 is the most widely used sheet for general applications, including gaskets, sealing, cushioning, and weather-stripping. It provides medium oil and ozone resistance. Our manufacturing process provides a smooth and clean finish that is free of talc, making it popular for PSA applications.

Applications: Electrical Insulation, Wear-Resistant Pads, Water Retaining Structures, Corrosion-Resistant Coatings, Diaphragms, Isolation Mounts, Industrial Matting, Vibration Pads, Industrial Uses, Gaskets, Hoses, and Buffers.



15

FLEXGARD® BLENDED RUBBER - STYLES #110, #125, #130

RM Biltrite® Flexgard® Blended Rubber is an excellent general-purpose polymer, suitable for basic applications where an economical rubber compound is needed. It provides moderate resistance to oil, gasoline, sunlight, ozone, and oxidizing material. Flexgard® Blended Rubber is ideally suited for stripping and applications where petroleum, chemical, weathering, and ozone or oxidation is not required or present.

Applications: Wear-Resistant Pads, Water Retaining Structures, Isolation Mounts, Industrial Matting, Vibration Pads, Industrial General Purpose Uses.

®RUBBER


TECHNICAL SPECIFICATIONS FLEXGARD® ECONOMY GRADE BLENDED RUBBER - STYLE #110Item ID IR110-40 IR110-50 IR110-60 IR110-70 IR110-80

Durometer Hardness (Shore A) 40 ± 5 50 ± 5 60 ± 5 70 ± 5 80 ± 5


Elongation 300% 250% 200% 200% 150%


-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)




TECHNICAL SPECIFICATIONS FLEXGARD® COMMERCIAL GRADE BLENDED RUBBER - STYLE #125Item ID IR125-40 IR125-50 IR125-60 IR125-70 IR125-80

Durometer Hardness 40 ± 5 50 ± 5 60 ± 5 70 ± 5 80 ± 5


Elongation 300% 300% 300% 200% 100%


-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)




Standard Thicknesses: 1/16” (1.6 mm), 3/32” (2.4 mm), 1/8” (3.2 mm), 3/16” (4.8 mm), 1/4” (6.4 mm), 3/8” (9.5 mm)), 1/2” (12.7 mm), 3/4” (19.1 mm), & 1” (25.4 mm)Standard Widths: 36" (91.4 cm) & 48" (121.9 cm)Custom sizes available upon request.

TECHNICAL SPECIFICATIONS FLEXGARD® HIGH-TENSILE GRADE BLENDED RUBBER - STYLE #130Item ID IR130-40 IR130-50 IR130-60 IR130-70 IR130-80

Durometer Hardness 40 ± 5 50 ± 5 60 ± 5 70 ± 5 80 ± 5


Elongation 300% 300% 300% 200% 300%


-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)





16

*Made with FDA approved ingredients*Made with FDA approved ingredients

TECHNICAL SPECIFICATIONS RUBBERMAX® NITRILTE BLACK GRADE 1 - STYLE #201Item ID IR201-40 IR201-50 IR201-60 IR201-70 IR201-80

Durometer (Shore A) 40 ± 5 50 ± 5 60 ± 5 70 ± 5 80 ± 5


Elongation 350% 300% 250% 200% 100%

Compression Set - 22 Hrs @ 100 °C 50% 50% 50% 50% 50%

Volume Swell - 70 Hrs @ 100 °C in ASTM Oil 903 60% 60% 60% 60% 60%


-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

-20 - +170 °F (-29 - +77 °C)

Grade (ASTM D2000 1BF) Grade 1 Grade 1 Grade 1 Grade 1 Grade 1




TECHNICAL SPECIFICATIONS RUBBERMAX® NITRILTE WHITE FDA* GRADE 1 - STYLE #221Item ID IR221-60

Durometer (Shore A) 60 ± 5

Tensile Strength 1000 psi (6.9 MPa)

Elongation 250%

Compression Set - 22 Hrs @ 100 °C 50%

Volume Swell - 70 Hrs @ 100 °C in ASTM Oil 903 60%

Temperature Range -20 - +170 °F (-29 - +77 °C)

Grade (ASTM D2000 1BF) Grade 1

Surface Finish / Back Finish Smooth / Smooth

Surface Lining Film

Color White

RUBBERMAX® NITRILE GRADE 1- STYLE #201

®RUBBER

RM Biltrite® Rubbermax® Nitrile Rubber Grade 1 is a synthetic rubber copolymer comprised of acrylonitrile (ACN) and butadiene. Nitrile has a generally strong resistance to oil, fuel, petroleum-based hydraulic fluids, aliphatic hydrocarbons, hydrocarbon solvents, alkalis, acids, and other chemicals. Like natural rubber, nitrile can be damaged by ozone, ketones, esters, and aldehydes. It is more resistant than natural rubber to oils and acids and has superior strength, but inferior flexibility. Nitrile rubber is less likely to cause an allergic reaction than natural rubber, making it a safer option for medical uses.

Applications: Automotive Industry, Aeronautical Industry, Fuel-Handling Gasket Seals, Rollers, Self-Sealing Fuel Tanks, Oil-Handling Gasket Seals, Hoses, Disposable Gloves, Transmission Belts, Grommets, Molded Goods and Floor Mats.

Standard Thicknesses: 1/16” (1.6 mm), 3/32” (2.4 mm), 1/8” (3.2 mm), 3/16” (4.8 mm), 1/4” (6.4 mm), 3/8” (9.5 mm)), 1/2” (12.7 mm), 3/4” (19.1 mm), & 1” (25.4 mm)Standard Widths: 36" (91.4 cm) & 48" (121.9 cm)Custom sizes available upon request. *Made with FDA approved ingredients.


RUBBERMAX® NITRILE FDA* GRADE 1- STYLE #221


17

TECHNICAL SPECIFICATIONS RUBBERMAX® NITRILTE WHITE FDA* GRADE 1 - STYLE #221Item ID IR221-60

Durometer (Shore A) 60 ± 5


Elongation 250%

Compression Set - 22 Hrs @ 100 °C 50%

Volume Swell - 70 Hrs @ 100 °C in ASTM Oil 903 60%


Grade (ASTM D2000 1BF) Grade 1


Surface Lining Film

Color White

RUBBERMAX® EPDM GRADE 1 - STYLE #301

RM Biltrite® Rubbermax® EPDM Rubber Grade 1 is a highly durable synthetic elastomer product. It has good temperature flexibility and strong resistance to water and steam, making it suitable for extreme temperatures and exposure to moisture. EPDM is an excellent choice for outdoor uses due to high resistance to damaging elements like heat, UV, ozone, oxidation, and sunlight. EPDM rubber also exhibits good resistance to alkalis, acids, and oxygenated solvents. Not recommended for applications involving food or petroleum-based products.

Applications: Insulation, Window Seals, HVAC Industry, Automotive Industry, Anti-Vibration, Roof Membranes, Liners, and Outdoors.

TECHNICAL SPECIFICATIONS RUBBERMAX® EPDM GRADE 1 - STYLE #301Item ID IR301-40 IR301-50 IR301-60 IR301-70

Durometer Hardness (Shore A) 40 ± 5 50 ± 5 60 ± 5 70 ± 5

Tensile Strength 800 psi (5.5 MPa) 800 psi (5.5 MPa) 800 psi (5.5 MPa) 800 psi (5.5 MPa)

Elongation 300% 300% 250% 150%

Compression Set - 22 Hrs @ 212 °F (100° C) 50% 50% 50% 50%

Temperature Range -40 - +212 °F (-40 - +100 °C) -40 - +212 °F (-40 - +100 °C) -40 - +212 °F (-40 - +100 °C) -40 - +212 °F (-40 - +100 °C)

Grade (ASTM D2000 1BA) Grade 1 Grade 1 Grade 1 Grade 1

Surface Finish / Back Finish Smooth / Smooth Smooth / Smooth Smooth / Smooth Smooth / Smooth

Surface Lining Film Film Film Film

Color Black Black Black Black


RUBBERMAX® NATURAL RUBBER (NR) FDA* GRADE 1 - STYLE #441

TECHNICAL SPECIFICATIONS RUBBERMAX® NR GRADE 1 - STYLE #441Item ID IR441-40

Durometer Hardness (Shore A) 40 ± 5


Elongation 600%

Compression Set - 22 Hrs @ 212 °F (100 °C) 50%


Grade (ASTM D2000 1BA) Grade 1


Surface Lining Film

Color Tan

RM Biltrite® Rubbermax® Natural Rubber (NR) Grade 1 is manufactured using 100% tree-sourced latex to produce a low compression set, high tensile strength, superior resilience, and good abrasion resistance, tear resistance, and vibration dampening properties. Natural Rubber sheeting ingredients are FDA approved and can be used for various food and pharmaceutical industry applications. Not recommended for uses involving contact with hydrocarbons, ozone, UV, or strong acids.

Applications: Automotive Industry, Construction Industry, Rubber/Metal Bonded Vibration Isolators and Mounts, Ducting Products, Flotation Devices, Chemical Industry, and Molded Components.

- Floating stock- Made with FDA approved ingredients

Standard Thicknesses: 1/16” (1.6 mm), 3/32” (2.4 mm), 1/8” (3.2 mm), 3/16” (4.8 mm), 1/4” (6.4 mm), 3/8” (9.5 mm)), 1/2” (12.7 mm), 3/4” (19.1 mm), & 1” (25.4 mm)Standard Widths: 36" (91.4 cm)

product catalog - rm biltrite...rm biltrite® customers service many industries and include gasket...

Documents