protect your product from the elements with ingress protection (ip) testing
TRANSCRIPT
PROTECT YOUR PRODUCT
WITH INGRESS PROTECTION (IP) TESTINGFROM THE ELEMENTS
Ingress protection testing is used to determine if a product’s exterior case or enclosure will protect the working parts from water, dust or intrusion. When foreign particles get
inside a product, they can cause damage and poor performance. Ingress protection testing, or IP testing, should be performed at an accredited test laboratory.
Selecting and testing to an IP Rating establishes the level of protection you want your products to feature.
IP Ratings are called out in the test standard known as IEC 60529 The protection rating is displayed by the letters “IP” followed by two numbers. The first digit indicates the level of protection from solid ingress and the second digit represents the level of protection from liquid ingress.
IP
SOLIDSWATER
Protected against a solid object greater than 50 mm such as a hand.1
2345
12345678
6
Protected against a solid object greater than 12.5 mm such as a finger.
Protected against a solid object greater than 2.5 mm such as a screwdriver.
Protected against a solid object greater than 1 mm such as a wire.
Dust Protected. Limited ingress of dust permitted. Will not intefere with operation of the equipment. Two to eight hours.
Dust tight. No ingress of dust. Two to eight hours.
2 3Ingress
ProtectionSolids Water
IP (INGRESS PROTECTION) RATINGS GUIDE
Cascade TEK is accredited to perform IP testing and works with each customer to provide the appropriate test for each product. We have the tools
needed to meet each industry standard.
Which IP Test Is Best For My Product?
IMMERSION TANKS SPECIFIC DUSTSAND FLUIDS
CALIBRATED NOZZLES
Protected against vertically falling drops of water. Limited ingress permitted.
Protected against vertically falling drops of water with enclosure tilted up to 15 degrees from the vertical. Limited ingress permitted.
Protected against sprays of water up to 60 degrees from the vertical. Limited ingress permitted for three minutes.
Protected against water splashed from all directions. Limited ingress permitted.
Protected against jets of water. Limited ingress permitted.
Water from heavy seas or water projected in powerful jets shall not enter the enclosure in harmful quantities.
Protection against the effects of immersion in water between 15 cm and 1 m for 30 minutes.
Protection against the effects of immersion in water under pressure for long periods.
50mm
12 mm
15
A UV sensitive dye allows easy
inspection in small and tight enclosures.
TRY IT WITH DYE!
Resource: bluesea.comPhotos courtesy of Seidiowww.cascadetek.com
Infographic designed by Mad Fish SEOCopyright © 2014 Cascade TEK
9Protection against the effects of high pressure and temperature water jet.