protection board
DESCRIPTION
Protection BoardTRANSCRIPT
-
Pro
tect
ion
Boa
rd
Protection Board
Robust, protection board for use withwaterproofing membranes
Uses
To protect waterproofing membranes against impact andabrasion damage from site traffic and from coarse or sharp
materials during backfill operations.
Advantages
n Light and easily handled
n Low water absorption
n Rot-proof
n Durable
n Robust
n Flexible
Description
Fosroc protection boards are tough, rot-proof, bitumen
impregnated boards used for protecting waterproofingmembranes against physical damage.
Technical support
Fosroc offers a comprehensive technical support package to
specifiers, end-users and contractors which includes computeraided design (C.A.D.) and on-site assistance from staff withunrivalled experience in the industry.
Properties
Form : Semi-rigid boards
Specific gravity : 1.28 kg/m3
Water absorption : < 1% at 24 hours(ASTM D507)Softening point : 159 C(ASTM D36)Penetration(ASTM D5) : 5.5 dmm @ 25C
23.9 dmm @ 65CPuncture resistance : >1500N/32mm for 3.5mm(ASTM E154) >1600N/32mm for 6.0mm
Specification
The waterproofing membrane shall be protected frommechanical damage by a protection board, nominal thickness
3.5 mm, supplied by Fosroc. Such protection board shall beweather, water and rot-proof.
Instructions for use
Fosroc protection boards can be cut with a sharp knife.
On both horizontal and vertical applications, boards shouldbe abutted and joints taped using 50 mm wide strips of self
adhesive membrane cut from the roll.
Protection boards should be adhered to the membrane usingFosrocs Plastiseal bitumen rubber, cold applied sealant.
Estimating
Sheet size
Nominal thickness 3.5 mm : 2.00 x 0.95 mNominal thickness 6 mm : 2.00 x 0.95 m
Precautions
Health and safety
There is no health hazard associated with the normal use ofthis product.
-
UAE/0130/01/J
Al Gurg Fosroc LLC
P. O. Box 657DubaiUnited Arab Emirates
TEL : (04) 285 8606FAX : (04) 285 9649
REGIONAL SALES OFFICES IN :
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which
may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing, it is the
customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product is suitable for
the intended application, and that the actual conditions of use are in accordance with those recommended. Because Fosroc has no control over the conditions of
use of its products, all recommendations or suggestions regarding the use of these products are made without guarantee.
ABU DHABI
Al Gurg Fosroc
TEL : 673 1779
FAX : 673 1449
BAHRAIN
YBA Kanoo
TEL : 738200
FAX : 732828
KUWAIT
Boodai
TEL : 481 7618
FAX : 483 2124
OMAN
GETCO
TEL : 771 5080
FAX : 771 7554
QATAR
Tadmur
TEL : 441 3628
FAX : 444 0812
DUBAI
Al Gurg Fosroc
TEL : 285 8787
FAX : 285 2023
www.fosrocgulf.com
Additional Information
Fosroc manufactures a wide range of complementary products
which include :
n waterproofing membranes & waterstops
n joint sealants & filler boards
n cementitious & epoxy grouts
n specialised flooring materials
Fosroc additionally offers a comprehensive package ofproducts specifically designed for the repair and refurbishment
of damaged concrete. Fosrocs Systematic Approach toconcrete repair features the following :
n hand-placed repair mortars
n spray grade repair mortars
n fluid micro-concretes
n chemically resistant epoxy mortars
n anti-carbonation/anti-chloride protective coatings
n chemical and abrasion resistant coatings
For further information on any of the above, please consult
your local Fosroc office - as below.