• TheRK-300automaticallydetectstherightversionsof the product to control. Connect theDB9 cablesuppliedoranEthernetcrossovercableusingthesameprotocolastheunitconnected.

• TocontrolthefollowingSeamlessSwitchers:

Control Mode

Seamless Mixer

Seamless Matrix

Quadra-vision

Soft Edge Blending

EKS500 x x(1) x

EKS400 x x(1)

OPS300 x x

OPS200 x

PLS300 x

PLS200 x

SVU300 x

SVU200 x

SMX100 x

SMX200 x(1)

STE100 x

STE200 x

SQD200 x

Navigation Menu:Toaccess theRK-300menu,press the [EXIT/MENU]button in the control section.To highlight items in themenuwhichwill appear on the VFD screen, turn thescrollknobleftorrighttothedesiredmenuitem.Whenyou have reached the desired menu item, press the[ENTER] button in the control section to access thatmenufunction.

Pressingthe[ENTER]buttonwhenaselectionhasbeenmade sets the value to that selection in the RK-300memory.Whenallsettingshavebeenmade,pressthe[EXIT/MENU]buttontoexitsub-menusandreturntothemainmenu.

IMPORTANT:simplyselectingamenuitemwillnotsetittothatvalue.Besuretopressthe[ENTER]buttonwhenparameteringthemenuitems.OnceyouhaveconnectedyourRK-300toyourswitcher,configuretheconnectionsettingsonbothdevices.Foraserialconnection,selectRS232fromtheRS232/LANmenuonbothdevices.(In[CONTROL]menu)For a LAN connection, select LAN from the RS232/LANmenuonbothdevices(In[CONTROL]menu),andconfigureeachdevicewithauniqueIPintheLANsetup->RK-300addressmenu.ThedefaultIPontheRK-300is192.168.0.15.Next,entertheIPofthedeviceyouwishtocontrolintheLanSetup->Deviceaddressmenu.Onceyoursettingsarecorrect, theRK-300willbegin tosynchronizewiththedevice,andyouwillbereadytobegin.(Waitaminute).

QUICK START GUIDE

What’s in the box

RK-300 settings

Thank you for choosing Analog Way and the RK-300. By following these simple steps, you should be able to setup and use your powerful remote Control Keypad within minutes. Discover the RK-300 extensive capabilities and intuitive interface while configuring your first show, and unleash your creativity for a new experience in show and event management by Analog Way.

RK-300 - Ref. RK-300

1 x RK-300 (RK-300)1 x Power supply Cord1 x DB9 (M/F) Cable1 x Carrying Case1 x Quick Start Guide *

* Download on our website: http://www.analogway.com

(1) We recommend using the Advanced Seamless Matrix Mode with an ORCHESTRA or a Remote Control Software (RCS).

Button Color Usage: #1 = Source is on the main outputsSolid red: #2 = Freeze enable #3 = Stand-by button #4 = Preset Selection

Solid green: #1 = Source is on Preview #2 = Function available for modification

Solid orange: Unlocked sources Blinking red: Layer/source selected, and is currently active on the main output

Blinking green: Layer/source selected, and is not currently active one the main output

Front Panel Description

WORKING WITH THE RK-300

Toggle Standard or Mosaic mode when available.

Switch between Status & Control Mode.Exit from menu.

Buttons and functions are available according to the unit wich is controlled.

PREVIEW

EXIT/MENU

BACKGROUND/FRAME: Select the Frame Layer.BACKGROUND LIVE/ PIP 1: Select the Live Layer/PIP1.PIP 2: Select the PIP2 live Layer.PIP 3: Select the PIP3 live Layer.LOGO 1: Select the Logo 1 Layer.LOGO 2: Select the Logo 2 Layer.DSK: Shortcut to the Keying/Titling menu for the selected source.

#1 L/ F 1: Press to access source #1, Frame #1 or Logo #1.#2 L/ F 2: Press to access source #2, Frame #2 or Logo #2.#3 L/ F 3: Press to access source #3, Frame #3 or Logo #3.#4 L/ F 4: Press to access source #4, Frame #4 or Logo #4.#5 L/ F 5: Press to access source #5, Frame #5 or Logo #5.#6 L/ F 6: Press to access source #6, Frame #6 or Logo #6.#7 L/ F 7: Press to access source #7, Frame #7 or Logo #7.#8 AL/ F 8: Press to access source #8, Frame #8 or Logo #8 or Animated Logo.DVI 1 to DVI 2: Press to access DVI #1 or DVI #2.SDI 1 to SDI 4: Press to access SDI #1,2,3 or 4.BLACK: Change the active layer to Black to clear a layer or PIP.FREEZE: Freeze the input linked to the current layer on MAIN.

OUTPUT #1: Press to select the Output #1, select a layer and a source then press [TAKE].OUTPUT #2: Press to select the Output #2, select a layer and a source then press [TAKE].

SHIFT: Secondary function selection button.

INPUT

MATRIX

SHIFT

LAYER

* accessible via the Shift KeyPress on [TAKE] allows to display the pre-selected sources onto the MAIN output with the selected effects.

VOL: Volume adjustment of the MAIN output (adjust with the knob ◄ ►).Button is blinking during the adjustment. This function will be dis-missed after 2 seconds delay or after pushing [ENTER] button.

MUTE: Toggles the audio mute of the Main output. Button illuminates when volume is muted.

Easy adjustments (size or position) with this mini joystick. Adjust the selected PIP or Logo, X-Axis (Left/Right), Y-Axis (Up/Down) and click to change the mode (position or size).

ENTER button validates a selected item.

Adjust Sources:

Chose the selected source Aspect Out as:1:1: No scaling, layer size has no effectCENTERING*: Centered (aspect ratio preserved, black bars around source)FULL*: Fullscreen (aspect ratio distorted)CROP*: Cropped (aspect ratio preserved, extra image cropped ----ZOOM: Configures the Layer Zoom----SIZE: Resize the active layer with the mini joystickPOS: Adjust PIP Layer or Logo Position with the mini joystick

CUT: Select Cut as the current transition type.

FADE: Select Fade as the current transition type.

USER 1: Selects the customized transition configured in the Control menu.USER 2: Select User #2 as a customized transition in the Control menu.

Preset section: Recalls stored presets from the device. Store presets using Menu -> Preset-> Store Preset.

P1/P5: Select P #1 as a customized preset or P #5 by SHIFT function.P2/P6: Select P #2 as a customized preset or P #6 by SHIFT function.P3/P7: Select P #3 as a customized preset or P #7 by SHIFT function.P4/P8: Select P #4 as a customized preset or P #8 by SHIFT function.

Allow to copy the previous Current Preset in the Next Preset at the end of a [TAKE].

Mini T-Bar to control effect level.

Available when controling a device which offers Quadravision.W1: Change the active layer into the Window #1.W2: Change the active layer into the Window #2.W3: Change the active layer into the Window #3.W4: Change the active layer into the Window #4.

Allow to scroll through the different menus

VOLUME

CONTROL

T-BAR

TOGGLE PRESET

TAKE

QUADRAVISION

ENTER

ADJUSTMENT

POSITION

EFFECT/PRESET

Rear Panel Description

Menu Tree

Going further with the RK-300The RK-300 allows for remote control of all available device features. Please check your device manual for more information on device operation and usage. Please check our website for further information: www.analogway.com

Version : 4.10 - 04/06/12 - M3.0 Code : 140116

RS-232 PORT: This 9-pin Female D connector provides RS-232 port serial communication with the switcher and also to upgrade the RK-300. A DB9 F/F crossover cable (not supplied) is required for an RS232 update. This port can also provide power to operate the RK-300 when connected to a switcher.

RJ-45 Connector: Connect the RK-300 to a 10/100 BT Ethernet LAN using this female RJ-45 connector: used to control the switcher and also to upgrade the RK-300. Please see the updater software instructions for more information. (Crossed cable for a direct link between RK-300 unit, straight cable through a hub.)

DC Power connector: Plug a Jack coaxial 5.5 - 2.1 - 9mm - external GND. 9/12 Vdc - 1A.

DC

RS-232

RJ-45

Versions

RS232/LAN

LAN setup

Key locking

Prog. keys

LCD brightness

Key brightness

Standby

Default values (L2)

LAN Update

RS232

Version: 1.00 BETA

I3=xxxx I4=xxxx

Boot: 1.00 BETA

O=0000

CS2=xxxx

I1=xxxx I2=xxxx

CS1=xxxx

CS3=xxxx

LAN

TCP

All

Fade

UDP

Menus

User 1 User 2

RK-300 address... Remote address... Gateway address... RK-300 port... Remote port... (L1)

Netmask... Default setup... (L2)

RK-300 CONTROL

(L1) UDP only(L2) Confirmation asked(L3) Only for User1& User2

WarrantyAll Analog Way products have a 3 year warranty on parts and labor, back to factory, but do not include faults resulting from user negligence, special modifications, electrical surges, abuse (drop/crush), and/or other unusual damage.

Please note: The included carrying case and protective foam is not covered under warranty.

NOTE: The latest firmware upgrade is always available on our website: http://www.analogway.com

Allow to secure with a KensingtonTM Lock.

Type (L3)

Direction (L3)

Effect duration