r s ebert norman brady€¦ · electrical symbol legend abbreviations project general notes...
TRANSCRIPT
ELECTRICAL SYMBOL LEGEND
ABBREVIATIONS
PROJECT GENERAL NOTES
DEMOLITION NOTES
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E1.1
ELE
C. LE
GE
ND
&
G
EN
N
OT
ES
JLS
2/12/2018 9:29:19 AM, Simes & Rosch, LLC
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
1' x 4' RECESSED OR SURFACE MOUNT LENSED FLUORESCENT FIXTURE WITH FLAT ACRYLIC LENS.
AutoCAD SHX Text
1' x 4' RECESSED OR SURFACE MOUNT LENSED FLUORESCENT FIXTURE WITH FLAT ACRYLIC LENS AND 90 MINUTE EMERGENCY BATTERY.
AutoCAD SHX Text
4' INDUSTRIAL FLUORESCENT LIGHT WITH REFLECTOR AND WIRE GUARD.
AutoCAD SHX Text
RECESSED FLUORESCENT OR LED CAN LIGHT FIXTURE. HATCHING REPRESENTS FIXTURE WITH 90 MINUTE EMERGENCY BATTERY.
AutoCAD SHX Text
EXISTING WALL MOUNT LIGHT FIXTURE. - 'RL' INDICATES RELOCATED FIXTURE. - 'EX' INDICATES FIXTURE TO REMAIN.
AutoCAD SHX Text
DECORATIVE PENDANT MOUNTED LINEAR FLUORESCENT OR LED LIGHT FIXTURE. MAY BE MOUNTED IN CONTINUOUS ROWS OF VARYING LENGTHS. HATCHING REPRESENTS FIXTURE WITH 90 MINUTE EMERGENCY BATTERY.
AutoCAD SHX Text
SYMBOL
AutoCAD SHX Text
SINGLE POLE TOGGLE SWITCH, 20 AMP, 120/277 VOLT, WITH COVER PLATE.
AutoCAD SHX Text
THREE-WAY TOGGLE SWITCH, 20 AMP, 120/277 VOLT, WITH COVER PLATE.
AutoCAD SHX Text
NON-ROTARY DIMMING SWITCH (RATED FOR LOAD), 120/277 VOLT, WITH COVER PLATE.
AutoCAD SHX Text
SINGLE POLE TOGGLE SWITCH WITH BUILT IN DUAL-TECHNOLOGY OCCUPANCY SENSOR, 20 AMP, 120/277 VOLT, WITH COVER PLATE.
AutoCAD SHX Text
CEILING MOUNTED DUAL-TECHNOLOGY OCCUPANCY SENSOR PER SPECIFICATIONS (AUTOMATIC ON/OFF).
AutoCAD SHX Text
DUPLEX RECEPTACLE, 20A, 120V, WITH GROUND AND COVER PLATE. MOUNT BOTTOM OF RECEPTACLE 6" ABOVE COUNTER OR SINK.
AutoCAD SHX Text
QUADRUPLEX RECEPTACLE, 20A, 120V, WITH GROUND AND COVER PLATE.
AutoCAD SHX Text
GFI DUPLEX RECEPTACLE, 20A, 120V, WITH GROUND AND COVER PLATE. 'EX' INDICATES EXISTING, TO REMAIN. .
AutoCAD SHX Text
GFI DUPLEX RECEPTACLE, 20A, 120V, WITH GROUND AND COVER PLATE. MOUNT BOTTOM OF RECEPTACLE 6" ABOVE COUNTER OR SINK. 'EX' 'EX' INDICATES EXISTING, TO REMAIN
AutoCAD SHX Text
SPECIAL PURPOSE RECEPTACLE WITH GROUND AND COVER PLATE. TAG (IF PROVIDED) INDICATED NEMA RECEPTACLE TYPE.
AutoCAD SHX Text
SURFACE MOUNTED OR RECESSED ELECTRICAL PANELBOARD. SEE POWER RISER DIAGRAM AND PANEL SCHEDULES FOR MORE INFORMATION.
AutoCAD SHX Text
DISCONNECT. "30/2/30" REPRESENTS "AMPS /POLES / FUSE SIZE ". A FUSE SIZE OF "NF" INDICATES A NON-FUSED DISCONNECT. PROVIDE NEMA 3R ENCLOSURES FOR ALL OUTSIDE DISCONNECTS.
AutoCAD SHX Text
JUNCTION BOX, PER NEC AND SPECIFICATIONS. ROUND SYMBOL REPRESENTS STANDARD WALL MOUNT OR HIDDEN BOX. SQUARE SYMBOL REPRESENTS FLOOR OR UNDERFLOOR MOUNTED BOX.
AutoCAD SHX Text
TELEVISION OUTLET. NUMBER, IF PROVIDED, REPRESENTS HEIGHT ABOVE FINISHED FLOOR (IN INCHES).
AutoCAD SHX Text
SPECIFIC KEYED NOTE.
AutoCAD SHX Text
DETAIL TAG. TOP FIELD INDICATES SPECIFIC DETAIL NUMBER. BOTTOM FIELD INDICATES SHEET WHERE DETAIL IS LOCATED.
AutoCAD SHX Text
EXIT SIGN WITH INTEGRAL 90 MINUTE EMERGENCY BATTERY. SHADED SIDE REPRESENTS ILLUMINATED FACE. ARROWS REPRESENT DIRECTIONAL CHEVRONS.
AutoCAD SHX Text
FLEXIBLE CONDUIT, PER NEC AND SPECIFICATIONS.
AutoCAD SHX Text
WIRE ARC. ARROWS REPRESENT HOMERUNS. HASHMARKS REPRESENT CONDUCTORS (LONG HASHMARK IS NEUTRAL). GROUND CONDUCTOR NOT SHOWN.
AutoCAD SHX Text
TRT
AutoCAD SHX Text
TRIPLE TUBE
AutoCAD SHX Text
COLOR RENDERING INDEX
AutoCAD SHX Text
CRI
AutoCAD SHX Text
DOUBLE TWIN TUBE (QUAD)
AutoCAD SHX Text
DTT
AutoCAD SHX Text
ABOVE FINISHED FLOOR
AutoCAD SHX Text
AFF
AutoCAD SHX Text
NL
AutoCAD SHX Text
NIGHTLIGHT (UNSWITCHED)
AutoCAD SHX Text
AUTHORITY HAVING JURISDICTION
AutoCAD SHX Text
AHJ
AutoCAD SHX Text
LIGHTING CONTROL INTERFACE
AutoCAD SHX Text
LCI
AutoCAD SHX Text
UP
AutoCAD SHX Text
UNDERGROUND PRIMARY
AutoCAD SHX Text
UNLESS NOTED OTHERWISE
AutoCAD SHX Text
GALVANIZED RIGID STEEL
AutoCAD SHX Text
GROUND FAULT CIRCUIT INTERRUPT
AutoCAD SHX Text
ELECTRIC WATER COOLER
AutoCAD SHX Text
UNO
AutoCAD SHX Text
EWC
AutoCAD SHX Text
GFI
AutoCAD SHX Text
GRS
AutoCAD SHX Text
TYP.
AutoCAD SHX Text
TYPICAL
AutoCAD SHX Text
AHU
AutoCAD SHX Text
AIR HANDLING UNIT
AutoCAD SHX Text
DOOR ACCESS CONTROLLER
AutoCAD SHX Text
DAC
AutoCAD SHX Text
US
AutoCAD SHX Text
UNDERGROUND SECONDARY
AutoCAD SHX Text
WP
AutoCAD SHX Text
WEATHER PROOF (& GFI)
AutoCAD SHX Text
RTU
AutoCAD SHX Text
ROOF TOP UNIT
AutoCAD SHX Text
GENERAL CONTRACTOR
AutoCAD SHX Text
GC
AutoCAD SHX Text
PDU
AutoCAD SHX Text
POWER DISTRIBUTION UNIT
AutoCAD SHX Text
UPS
AutoCAD SHX Text
UNINTERRUPTIBLE POWER SUPPLY
AutoCAD SHX Text
NOT IN CONTRACT
AutoCAD SHX Text
NIC
AutoCAD SHX Text
FIRE SUPPRESSION CONTROL PANEL
AutoCAD SHX Text
FSCP
AutoCAD SHX Text
LONG - SHORT - INSTANTANEOUS
AutoCAD SHX Text
LSI
AutoCAD SHX Text
CONDENSING UNIT
AutoCAD SHX Text
CU
AutoCAD SHX Text
STC
AutoCAD SHX Text
SOUND TRANSMISSION CLASS
AutoCAD SHX Text
WAP
AutoCAD SHX Text
WIRELESS ACCESS POINT
AutoCAD SHX Text
FIRE ALARM CONTROL PANEL
AutoCAD SHX Text
FACP
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
30/2/30
AutoCAD SHX Text
2' x 2' RECESSED FLUORESCENT FIXTURE. HATCHING REPRESENTS FIXTURE WITH 90 MINUTE EMERGENCY BATTERY.
AutoCAD SHX Text
S
AutoCAD SHX Text
3
AutoCAD SHX Text
S
AutoCAD SHX Text
D
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
NEMA-5R
AutoCAD SHX Text
J
AutoCAD SHX Text
E-XXX
AutoCAD SHX Text
XX
AutoCAD SHX Text
XX
AutoCAD SHX Text
WORKSTATION OUTLET (DATA/VOICE). BOX AROUND SYMBOL INDICATES FLOOR MOUNT WITH BRASS COVER PLATE. NUMBER, IF PROVIDED, REPRESENTS HEIGHT ABOVE FINISHED FLOOR (IN INCHES).
AutoCAD SHX Text
84"
AutoCAD SHX Text
TV
AutoCAD SHX Text
92"
AutoCAD SHX Text
INTRUSION DETECTION SYSTEM
AutoCAD SHX Text
IDS
AutoCAD SHX Text
J
AutoCAD SHX Text
COMPACT FLUORESCENT LAMP
AutoCAD SHX Text
CFL
AutoCAD SHX Text
1. THE ELECTRICAL CONTRACTOR SHALL PROVIDE THE ELECTRICAL PORTION OF THE PROJECT. THIS INCLUDES, BUT IS NOT LIMITED TO: TEMPORARY ELECTRIC SERVICE AND DISTRIBUTION FOR CONSTRUCTION PURPOSES; NEW CIRCUIT BREAKERS FOR EXISTING PANELBOARDS AND RELATED FEEDER AND BRANCH CIRCUITS; ELECTRICAL DISCONNECTS, DEVICES, BOXES, SWITCHES; RELOCATION OF EXISTING AND PROVIDING NEW LIGHTING FIXTURES, AS SHOWN; TELEPHONE, COMPUTER, CABLE T.V. AND SECURITY SYSTEMS; AND COORDINATION WITH THE ELECTRIC UTILITY, OTHER CONTRACTORS, THE ARCHITECT AND COUNTY. 2. FOR THE PURPOSES OF THIS CONTRACT, THE TERM "PROVIDE" SHALL MEAN TO PROVIDE ALL LABOR, MATERIAL, EQUIPMENT, TRANSPORTATION, AND SUPERVISION REQUIRED TO FURNISH AND INSTALL. 3. APPLY FOR, OBTAIN, AND PAY FOR ALL REQUIRED PERMITS AND INSPECTION CERTIFICATES, AND PAY FOR ALL FEES ASSOCIATED WITH THE ELECTRICAL PORTION OF THE PROJECT. 4. THE NATIONAL ELECTRICAL CODE, NATIONAL ELECTRIC SAFETY CODE, NECA STANDARD OF INSTALLATION, AND FLORIDA BUILDING CODE, EDITIONS ADOPTED BY AHJ, SHALL ESTABLISH THE MINIMUM REQUIREMENTS FOR INSTALLATION, BUT IN ADDITION, ALL WORK SHALL ALSO COMPLY WITH OSHA, STATE, COUNTY, LOCAL OR MUNICIPAL CODE REQUIREMENTS AND THE RULES OF THE LOCAL ELECTRIC UTILITY. IN CASE OF CONFLICTS, CONFORM TO THE MORE STRINGENT REQUIREMENTS. IN CASES OF CONFLICTS BETWEEN THESE DESIGN DOCUMENTS AND REQUIREMENTS OF THE ABOVE CODES, CONTACT THE ENGINEER BEFORE PROCEEDING. 5. ALL MATERIALS USED IN THIS PROJECT SHALL BE NEW AND UNDERWRITERS' LABORATORIES (UL) LISTED AND LABELED, UNLESS OTHERWISE NOTED. 6. SUBMIT SHOP DRAWINGS, CATALOG SHEETS, OR OTHER DESCRIPTIVE DATA WITH SUFFICIENT INFORMATION TO ESTABLISH DESIGN, QUALITY AND PERFORMANCE. SUBMIT DATA FOR: CIRCUIT BREAKERS, DISCONNECTS, WIRING DEVICES, WIRE, CONDUIT, LIGHT FIXTURES AND LIGHTING CONTROLS. PROVIDE SUBMITTALS AS A SINGLE PACKAGE. 7. PROVIDE EQUIPMENT NAMEPLATES FOR ALL NEW EQUIPMENT, INCLUDING NEW DISCONNECTS. NAMEPLATES SHALL MATCH EXISTING. FOR DEDICATED CIRCUIT POWER OUTLETS, PROVIDE EMBOSSED ADHESIVE TAPE, WITH 1/8 INCH BLACK LETTERS ON CLEAR BACKGROUND. LABEL DEDICATED OUTLETS WITH NAME OF LOAD, PANEL AND CIRCUIT NUMBER. PROVIDE ARC FLASH AND SHOCK HAZARD WARNING LABELS FOR ELECTRICAL EQUIPMENT PER NEC 110.16. 8. USE ONLY COPPER BUILDING WIRE WITH TYPE THWN/THHN (DUAL RATED) OR XHHW INSULATION (GROUND WIRES MAY BE TYPE TW FOR CIRCUITS RATED 100A OR LESS OR TYPE THW FOR CIRCUITS OVER 100A). WIRE SHALL BE SIZED AND COLOR CODED PER THE NEC. CONDUCTORS FOR POWER AND LIGHTING CIRCUITS SMALLER THAN #12 AWG ARE NOT PERMITTED. 9. ALL CIRCUITS SHALL BE RUN IN CONDUIT AND SHALL CONTAIN SEPARATE GROUNDING CONDUCTOR SIZED PER NEC TABLE 250.122. WITH THE EXCEPTION OF CONDUIT IN AIR PLENUMS (WHICH ARE PRESENT IN THE BUILDING), FINAL CONNECTIONS (LESS THAN 6 FEET) TO ALL MOTORS AND OTHER VIBRATING EQUIPMENT SHALL BE MADE WITH LIQUID-TIGHT FLEXIBLE METAL CONDUIT (WITH GROUNDING CONDUCTOR). FLEXIBLE METAL CONDUIT (WITH GROUNDING CONDUCTOR) SHALL ONLY BE USED FOR FINAL CONNECTION (LESS THAN 6 FEET) TO DROP-IN LIGHT FIXTURES. NONMETALLIC FLEX CONDUIT OR TUBING SHALL NOT BE USED. MINIMUM SIZE FOR CONDUIT SHALL BE 1/2". UNLESS NOTED OTHERWISE, ALL CONDUIT SHALL BE CONCEALED. INSTALL ABOVEGROUND CONDUIT PARALLEL OR PERPENDICULAR TO BUILDING LINES. PROVIDE PULLWIRE FOR ALL EMPTY CONDUITS. 10. TYPE MC CABLE SHALL ONLY BE USED FOR TOTALLY CONCEALED 15 AND 20A, 120V BRANCH CIRCUITS IN EXISTING WALLS NOT BEING FURRED OUT. PROVIDE A JUNCTION BOX AT TOP OF WALL TO TRANSITION TO EMT. HOME RUNS TO PANEL FOR THESE CIRCUITS SHALL BE IN EMT CONDUIT. 11. FOR EMT CONDUIT, MAXIMUM SIZE SHALL BE 2 INCHES. EMT CONDUIT SHALL NOT BE USED BELOW GRADE, OUTSIDE, IN CONCRETE, WHERE EXPOSED TO DAMAGE, OR FOR EXPOSED WORK IN AREAS WHERE SUBJECT TO DAMAGE. PROVIDE STEEL COMPRESSION TYPE FITTINGS. 12. PVC CONDUIT SHALL ONLY BE USED IN THE GROUND OR CONCRETE SLAB AND SHALL BE SCHEDULE 40. ALL ELLS TURNING UP OUT OF THE EARTH OR CONCRETE SLAB SHALL BE ASPHALTUM OR PVC COATED RIGID GALVANIZED STEEL CONDUIT. 13. SEE PANEL SCHEDULES AND POWER RISER DIAGRAM FOR SIZE OF ALL CONDUCTORS AND CONDUIT. 14. NO MORE THAN 3 PHASE CONDUCTORS (ON ALTERNATING HOT LEGS) SHALL BE COMBINED IN ONE HOMERUN CONDUIT. PROVIDE A DEDICATED FULL-SIZE NEUTRAL FOR ALL CIRCUITS REQUIRING A NEUTRAL. 15. EXCEPT AS NOTED OTHERWISE, ALL ELECTRICAL DEVICE AND JUNCTION BOXES SHALL BE MADE OF GALVANIZED STEEL. BOXES FOR WEATHERPROOF AND WATERTIGHT APPLICATIONS OR IN CONCRETE SHALL BE MADE OF CAST METAL. PROVIDE PULLBOXES AND HANDHOLES AS NECESSARY FOR THE CIRCUITS SHOWN. 16. WITH THE EXCEPTION OF DEVICES ABOVE COUNTERS, MOUNT RECEPTACLES, DATA, PHONE, AND T.V. OUTLETS 18" A.F.F. (TO CENTER OF OUTLET) UNLESS NOTED OTHERWISE. MOUNT SWITCHES AT NO MORE THAN 47" A.F.F. (TO TOP OF SWITCH HANDLE) UNLESS NOTED OTHERWISE. IF THERE ARE OBSTRUCTIONS (I.E. A SERVICE COUNTER), MOUNT SWITCHES AT NO MORE THAN 44" A.F.F. (TO TOP OF SWITCH HANDLE). SEE SECTION 308 OF THE ADA STANDARDS FOR ACCESSIBLE DESIGN FOR MORE INFORMATION. CONFORM TO ALL AMERICANS WITH DISABILITY ACT (ADA) REQUIREMENTS. WIRING DEVICES AND COVER PLATES SHALL BE IVORY TO MATCH EXISTING. 17. PENETRATE ANY FIRE RATED WALLS, CEILINGS, AND FLOORS WITH FIRE STOPPING MATERIALS IN ACCORDANCE WITH FLORIDA BUILDING CODE REQUIREMENTS. PENETRATIONS OF ALL FIRE RATED ASSEMBLIES SHALL BE MADE IN ACCORDANCE WITH THE FIRE RATED ASSEMBLY'S UL LISTING, AS APPROVED BY THE AUTHORITY HAVING JURISDICTION. SEE EXISTING AND NEW ARCHITECTURAL DRAWINGS FOR LOCATIONS OF ANY FIRE WALLS, CEILINGS, AND FLOORS. 18. UNLESS NOTED OTHERWISE, ALL MOTORS, INTEGRAL STARTERS, CONTROL AND MONITORING DEVICES (INCLUDING WIRE AND CONDUIT FOR CONTROL CIRCUITS), TIMERS, RELAYS, PILOT DEVICES AND OTHER REQUIRED CONTROL COMPONENTS FOR MECHANICAL SYSTEMS WILL BE FURNISHED AND INSTALLED UNDER DIVISION 23. 19. UNLESS NOTED OTHERWISE, MAKE POWER WIRING CONNECTIONS TO ALL WATER HEATERS, PUMPS, MACHINERY, APPLIANCES, WATER COOLERS, HVAC EQUIPMENT AND OTHER ELECTRICALLY-OPERATED EQUIPMENT AS INDICATED OR AS REQUIRED. FURNISH AND INSTALL DISCONNECT SWITCHES, STARTERS AND PROTECTIVE DEVICES AS INDICATED ON THE DRAWINGS, EXCEPT FOR ITEMS FURNISHED WITH INTEGRAL DISCONNECT SWITCHES AND/OR STARTERS (SEE MECHANICAL AND PLUMBING SCHEDULES). 20. DRAWINGS ARE INTENDED TO BE DIAGRAMMATIC ONLY. REVIEW ARCHITECTURAL, CIVIL, MECHANICAL, AND PLUMBING DRAWINGS AND COORDINATE WITH OTHER CONTRACTORS TO CONFIRM EXACT LOCATION FOR LIGHTING FIXTURES, ELECTRICAL DEVICES, WIRING AND EQUIPMENT AND AVOID INTERFERENCES BETWEEN RACEWAYS, DUCTS, PIPING, AND STRUCTURAL MEMBERS. RELOCATE EQUIPMENT AS NECESSARY TO MAINTAIN NEC WORKING AND DEDICATED EQUIPMENT SPACE REQUIREMENTS. 21. VISIT THE SITE AND EXAMINE THOSE PORTIONS OF THE BUILDING AFFECTED BY THIS PROJECT BEFORE SUBMITTING BID, SO AS TO BECOME FAMILIAR WITH EXISTING SITE CONDITIONS. SUBMISSION OF A BID WILL BE CONSTRUED AS EVIDENCE THAT SUCH EXAMINATION HAS BEEN MADE AND LATER CLAIMS FOR LABOR, MATERIALS, OR EQUIPMENT REQUIRED FOR DIFFICULTIES ENCOUNTERED WILL NOT BE ACCEPTED. FIELD VERIFY CONFIGURATION OF EXISTING ELECTRICAL DISTRIBUTION SYSTEM, INCLUDING MANUFACTURER AND CATALOG NUMBER OF EXISTING EQUIPMENT AND SIZE AND RATING OF EXISTING CIRCUITS AND PROTECTIVE DEVICES BEFORE STARTING WORK OR PURCHASING MATERIALS. 22. IMPORTANT: NOTE THAT THE CEILING CAVITY IS CONSIDERED AN AIR PLENUM. ANY CABLING NOT IN CONDUIT WILL NEED TO IMPORTANT: NOTE THAT THE CEILING CAVITY IS CONSIDERED AN AIR PLENUM. ANY CABLING NOT IN CONDUIT WILL NEED TO NOTE THAT THE CEILING CAVITY IS CONSIDERED AN AIR PLENUM. ANY CABLING NOT IN CONDUIT WILL NEED TO BE PLENUM RATED. 23. THE ABOVE NOTES APPLY TO ALL ELECTRICAL DRAWINGS.
AutoCAD SHX Text
1. REMOVE AND PROPERLY DISPOSE OF EXISTING ELECTRICAL EQUIPMENT, LIGHT FIXTURES, DEVICES, TELECOM OUTLETS, WIRE, AND CONDUIT THAT ARE NOT BEING REUSED. REMOVE ALL UNUSED EXPOSED CONDUIT AND WIRES. FOR CONDUIT IN WALLS AND ABOVE CEILINGS, REMOVE UNUSED WIRE TO SOURCE AND CAP. CUT UNUSED CONDUIT PENETRATING WALLS AND CEILINGS FLUSH WITH SURFACE AND PATCH AND FINISH TO MATCH SURROUNDING AREAS. SEE ARCHITECTURAL DEMOLITION PLANS AND NEW AND EXISTING LIGHTING AND POWER PLANS FOR MORE INFORMATION. 2.RECEPTACLES AND RELATED CIRCUITS IN EQUIPMENT ROOMS (MECHANICAL, ELECTRICAL, TELECOM AND ELEVATOR ROOMS) RECEPTACLES AND RELATED CIRCUITS IN EQUIPMENT ROOMS (MECHANICAL, ELECTRICAL, TELECOM AND ELEVATOR ROOMS) ARE NOT SHOWN IF THEY ARE NOT BEING RE-CIRCUITED. SEE RECORD DRAWINGS FOR LOCATION. OTHER EXISTING RECEPTACLES TO REMAIN ARE SHOWN IN THE POWER PLANS, SHEETS E4.1 THROUGH E4.3 AND LABELED AS 'EX'. 3. CONTRACTOR SHALL VISIT SITE TO FAMILIARIZE WITH EXISTING CONDITIONS PRIOR TO SUBMITTING BID.
AutoCAD SHX Text
V
AutoCAD SHX Text
SINGLE POLE TOGGLE SWITCH, 20 AMP, 120/277 VOLT, WITH WEATHERPROOF ENCLOSURE.
AutoCAD SHX Text
WP
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
V
AutoCAD SHX Text
SINGLE POLE TOGGLE SWITCH WITH BUILT IN DUAL-TECHNOLOGY VACANCY SENSOR, 20 AMP, 120/277 VOLT, WITH COVER PLATE.
AutoCAD SHX Text
CEILING MOUNTED DUAL-TECHNOLOGY VACANCY SENSOR PER SPECIFICATIONS (MANUAL ON/ AUTOMATIC OFF).
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
LVD
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LOW VOLTAGE TOGGLE SWITCH WITH COVER PLATE. "D" INDICATES NON ROTARY DIMMING SWITCH.
AutoCAD SHX Text
EXISTING (TO REMAIN)
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
RELOCATED EQUIPMENT OR LIGHTING
AutoCAD SHX Text
EXISTING 2' x 2' RECESSED FLUORESCENT FIXTURE. HATCHING REPRESENTS FIXTURE WITH 90 MINUTE EMERGENCY BATTERY. - 'RL' INDICATES RELOCATED FIXTURE. - 'EX' INDICATES FIXTURE TO REMAIN.
AutoCAD SHX Text
EXISTING 1' x 4' RECESSED OR SURFACE MOUNT LENSED FLUORESCENT FIXTURE WITH FLAT ACRYLIC LENS. - 'RL' INDICATES RELOCATED FIXTURE. - 'EX' INDICATES FIXTURE TO REMAIN.
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
EXISTING RECESSED FLUORESCENT CAN LIGHT FIXTURE. HATCHING REPRESENTS FIXTURE WITH 90 MINUTE EMERGENCY BATTERY. - 'RL' INDICATES RELOCATED FIXTURE. - 'EX' INDICATES FIXTURE TO REMAIN.
AutoCAD SHX Text
EXISTING WALL MOUNTED LINEAR FLUORESCENT FIXTURE. - 'RL' INDICATES RELOCATED FIXTURE. - 'EX' INDICATES FIXTURE TO REMAIN.
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EXISTING EXIT SIGN. ARROWS REPRESENT DIRECTIONAL CHEVRONS. - 'RL' INDICATES RELOCATED FIXTURE. - 'EX' INDICATES FIXTURE TO REMAIN.
AutoCAD SHX Text
EX
AutoCAD SHX Text
DUPLEX RECEPTACLE, 20A, 120V, WITH GROUND AND COVER PLATE. NUMBER, IF PROVIDED, REPRESENTS HEIGHT ABOVE FINISHED FLOOR. 'EX' INDICATES EXISTING, TO REMAIN. .
AutoCAD SHX Text
84"
AutoCAD SHX Text
FACP
AutoCAD SHX Text
FIRE ALARM VARIABLE OUTPUT AUDIOVISUAL ALARM; MOUNTING HEIGHT PER NFPA 72 & AHJ. 'EX' INDICATES EXISTING TO REMAIN. 'RL' INDICATES RELOCATED DEVICE.
AutoCAD SHX Text
FIRE ALARM VARIABLE OUTPUT VISUAL STROBE ALARM; MOUNTING HEIGHT PER NFPA 72 & AHJ. 'EX' INDICATES EXISTING TO REMAIN. 'RL' INDICATES RELOCATED DEVICE.
AutoCAD SHX Text
EXISTING FIRE ALARM SYSTEM CONTROL PANEL (FACP) AND ANNUNCIATOR PANEL (ANN).
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EXISTING COMBINATION STARTER/DISCONNECT.
AutoCAD SHX Text
EXHAUST FAN.
AutoCAD SHX Text
F
AutoCAD SHX Text
F
AutoCAD SHX Text
- SPRINKLER SYSTEM FLOW SWITCH [F] - SPRINKLER SYSTEM TAMPER SWITCH [T] MOUNTING HEIGHT PER NFPA 72 & AHJ. SEE FIRE ALARM SYSTEM DRAWINGS FOR MORE INFORMATION.
AutoCAD SHX Text
T
AutoCAD SHX Text
ANN
AutoCAD SHX Text
ADDRESSABLE CEILING MOUNTED HEAT DETECTOR; MOUNTING PER NFPA 72 & AHJ. IF SHOWN WITH HIDDEN LINE UNIT IS MOUNTED ABOVE CEILING. IF HIDDEN, PROVIDE REMOTE INDICATING LIGHTS (LEDs).
AutoCAD SHX Text
FIRE ALARM PULL STATION ALARM; MOUNTING HEIGHT PER NFPA 72 & AHJ.
AutoCAD SHX Text
WAP
AutoCAD SHX Text
WIRELESS ACCESS POINT.
AutoCAD SHX Text
WIRELESS ACCESS POINT.
A
B
C
D
1 2 3 4 5 6 7 8
SD
R
SD
SCALE: 1/8" = 1'-0"
0 8' 16'
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&RR
S&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.comArch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E2.1
LIG
HT
IN
G P
LA
N - 1S
T F
LO
OR
JLS
N
SCALE: 1/8" = 1'-0"
LIGHTING PLAN - 1ST FLOOR
GENERAL NOTES: SPECIFIC NOTES:
160
STAIRS
125
STAIRS
101
WAITING
105
MEETING
ROOM
ELEV
104
FOYER
106
WOMEN
107
MEN
156
TRAINING
ROOM
155
FOYER
159
MEN
158
WOMEN
126
SHOWER
ROOM
122
JAN.
123
MEN
124
WOMEN
121
CORR.
161
COMM.
ROOM
140
ELEC.
114
DOH
IT
144
BREAK
ROOM
118
BREAK
ROOM
157
JAN.
171
STOR.
CASHIER
110
DOH
112
OFFICE
113
OFFICE
132
OFFICE
133
OFFICE
136
OFFICE
137
OFFICE
127
OFFICE
128
OFFICE
130
OFFICE
131
OFFICE
134
OFFICE
135
OFFICE
138
OFFICE
139
OFFICE
170
OFFICE
168
OFFICE
166
OFFICE
164
OFFICE
163
OFFICE
167
OFFICE
117
PLAN
ROOM
148
OFFICE
149
OFFICE
154
MECH.
ROOM
151
OFFICE
152
OFFICE
150
OFFICE
147
OFFICE
143
CORR.
146
CORR.
165
CORR.
162
CO
RR
.
145
CORR.
153
CO
RR
.
141
CO
RR
.
129
CORR.
108
CORR.
116
CO
RR
.
102
INTAKE
103
INTAKE
142
CORR.
109
SCANNING
111
OFFICE
169
OFFICE
119
STOR.
120
STOR.
109A
COPY
115
CORR.
A1 A3 A5 A7
A6A4A2
B5 B3 B1
B4 B2
C4 C2
C5 C3 C1
A9
A8 A10
2/12/2018 11:40:39 AM, Simes & Rosch, LLC
AutoCAD SHX Text
'HM1'
AutoCAD SHX Text
'H1A'
AutoCAD SHX Text
'P1B'
AutoCAD SHX Text
'P1C'
AutoCAD SHX Text
'T1A'
AutoCAD SHX Text
'P1A'
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
H
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
A1
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
K
AutoCAD SHX Text
K
AutoCAD SHX Text
K
AutoCAD SHX Text
K
AutoCAD SHX Text
M
AutoCAD SHX Text
M
AutoCAD SHX Text
M
AutoCAD SHX Text
M
AutoCAD SHX Text
M
AutoCAD SHX Text
M
AutoCAD SHX Text
EX
AutoCAD SHX Text
A1
AutoCAD SHX Text
RL
AutoCAD SHX Text
C
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A1
AutoCAD SHX Text
A2
AutoCAD SHX Text
A1
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A2
AutoCAD SHX Text
A1
AutoCAD SHX Text
K
AutoCAD SHX Text
1. SOME JUNCTION BOXES AND FLEX CONDUIT NOT SHOWN FOR CLARITY. PROVIDE JUNCTION BOXES AND FLEX CONDUIT AT FIXTURES WHERE APPROPRIATE. 2. SWITCHES WHICH ARE BACK-TO-BACK ON COMMON WALLS SHALL BE OFFSET 6" MINIMUM TO AVOID SOUND TRANSMISSION. 3. WITH THE EXCEPTION OF AREAS CONTROLLED BY THE CENTRAL LIGHTING CONTROL SYSTEM, EQUIPMENT ROOMS, STAIRWELLS, AND ANY OTHER AREA WHERE SUDDEN LOSS OF LIGHT COULD CAUSE A SAFETY CONCERN, PROVIDE VACANCY SENSORS IN ALL SPACES IN ACCORDANCE WITH THE 2014 FLORIDA BUILDING CODE TO SATISFY THE REQUIREMENT FOR AUTOMATIC LIGHTING CONTROL. SENSOR TECHNOLOGIES: CEILING MOUNTED ULTRASONIC SENSORS SHALL BE USED IN AREAS WITH OBSTRUCTIONS (I.E. GROUP RESTROOMS AND GENERAL OFFICE AREAS WITH PARTITIONS). CEILING MOUNTED PASSIVE INFRARED SENSORS SHALL BE USED IN OPEN AREAS (I.E. HALLWAYS, WAREHOUSES AISLES AND HIGH CEILING AREAS). CEILING MOUNTED DUAL TECHNOLOGY SENSORS (USING BOTH TECHNOLOGIES) SHALL BE USED FOR AREAS LARGER THAN 250 SQUARE FEET. WITH THE EXCEPTION OF OFFICES, WALL MOUNTED SENSORS MAY BE USED IN ROOMS UNDER 100 SQUARE FEET WITH NO OBSTRUCTIONS. NOTE THAT AUTOMATIC CONTROL IS NOT REQUIRED FOR LIGHTING INTENDED FOR 24 HOUR OPERATION (I.E. EMERGENCY LIGHTING, NIGHT LIGHTS, AND STAIRWAY LIGHTING). PROVIDE MANUAL OVERRIDE, 30 MINUTE TIMER, AND ALL REQUIRED ACCESSORIES (INCLUDING POWER PACKS AND RELATED LOW VOLTAGE WIRING). NOTE THAT LAYOUT SHOWN IS DIAGRAMMATIC (LAYOUT MAY CHANGE WITH MANUFACTURER AND ADDITIONAL SENSORS MAY BE REQUIRED). PROVIDE SUBMITTAL WITH SENSOR LAYOUT PROVIDED BY VENDOR. MANUFACTURER: WATTSTOPPER OR APPROVED EQUAL. 4. PROVIDE POWER TO ALL EMERGENCY BALLASTS BUILT INTO LIGHT FIXTURES, STANDALONE EMERGENCY LIGHT FIXTURES AND EXIT SIGNS AHEAD OF ANY SWITCHING ON THE SAME BRANCH CIRCUIT AS NORMAL LIGHTING FOR AREA SERVED. FOR CIRCUITS CONTROLLED BY THE LIGHTING CONTROL PANEL, USE THE UNSWITCHED LINE SIDE OF THE CONTROL PANEL CONTACTORS OR RELAYS.
AutoCAD SHX Text
REPLACE ENTIRE FIXTURE ROW WITH NEW TYPE 'G1' FIXTURES AS INDICATED. PROVIDE ANY REQUIRED DEVICES, BOXES, MOUNTING HARDWARE, ETC (TYP.). FOR CONTROL OF LIGHTS IN OFFICES, REFER TO DETAIL 3, SHEET E6.1 (TYP.). PROVIDE LIGHTING CONTROL SYSTEM PANEL 'LCS1' IN EXISTING ELECTRICAL ROOM 139. THIS PANEL SHALL PROVIDE AUTOMATIC CONTROL OF CENTRAL CIRCULATION AREAS AND MAIN CORRIDORS. BASIS OF DESIGN IS A WATTSTOPPER LMCP SERIES PANEL. PROVIDE ALL NECESSARY ACCESSORIES, CONTACTORS, CABLING, ETC. TO ENSURE TURN-KEY OPERATION OF SYSTEM. MAINTAIN UNSWITCHED HOT LEG TO ANY EXISTING EMERGENCY BALLASTS, EXIT SIGNS, AND NIGHTLIGHTS. PROVIDE LOW VOLTAGE SWITCH TO PROVIDE OVERRIDE CAPABILITY TO AUTOMATICALLY CONTROLLED LIGHTING WITHIN LOCAL AREA (TYP.). PROVIDE LOW VOLTAGE SWITCHES TO MAINTAIN EXISTING SWITCHING SCHEME FOR OVERHEAD LINEAR FLUORESCENT FIXTURES IN ROOM 102 AND 103. FIXTURE GROUP SHALL BE CONTROLLED VIA 'LCS1' (TYP.). PROVIDE LOW VOLTAGE SWITCH TO MAINTAIN EXISTING SWITCHING SCHEME FOR LOBBY AREA FIXTURES ON CIRCUIT 'H1A-19'. CIRCUIT SHALL BE CONTROLLED VIA 'LCS1' (TYP.). INTERCEPT EXISTING LIGHTING CIRCUIT AND PROVIDE JUNCTION BOX LOCATED ABOVE CEILING TO ALLOW EXISTING SPACE TO BE RECONNECTED TO NEW CIRCUITING AS INDICATED (TYP.). FOR CONTROL OF LIGHTS IN TRAINING ROOM 156, REFER TO DETAIL 2, SHEET E6.1.
AutoCAD SHX Text
1
AutoCAD SHX Text
5. PROVIDE CENTRAL LIGHTING CONTROL SYSTEM (LCS) TO ALLOW TIMED CONTROL AND OVERRIDE OF LOBBY AND CORRIDOR LIGHTING THROUGHOUT BUILDING. SEE SPECIFIC NOTE 1 FOR MORE INFORMATION. 6. ALL LIGHT FIXTURE BALLASTS SHALL HAVE AN "A" SOUND RATING. 7. SUPPORT FIXTURES (2 X 4 FOOT AND SMALLER) TO BE RECESSED IN REMOVABLE TILE CEILINGS (LAY-IN TYPE) FROM THE T-BAR TILE SUPPORT AND CONNECT TO REMOTE MOUNTED 4" SQUARE (MINIMUM SIZE, CONFORM TO NEC) JUNCTION BOXES WITH APPROVED SIX FOOT LONG, 3/8" FLEXIBLE CONDUIT "FIXTURE WHIP" WITH GROUNDING CONDUCTOR BONDED BETWEEN CONDUIT SYSTEM AND FIXTURE. 8. PROVIDE ALL REQUIRED HARDWARE AS NECESSARY TO PROPERLY INSTALL LIGHT FIXTURES. 9. PROVIDE INSULATED CEILING (I.C.) RATED FIXTURES WHERE RECESSED INCANDESCENT, COMPACT FLUORESCENT, OR LOW VOLTAGE LIGHT FIXTURES COME INTO DIRECT CONTACT WITH INSULATION. PROVIDE U.L. FIRE RATED LIGHT FIXTURES FOR FIRE RATED CEILINGS. 10. COORDINATE LOCATION OF LIGHT FIXTURES WITH OTHER TRADES PRIOR TO INSTALLATION. 11. IMPORTANT NOTE: FIXTURE LOCATIONS AND QUANTITIES SHOWN ARE AS REQUIRED TO MEET IMPORTANT NOTE: FIXTURE LOCATIONS AND QUANTITIES SHOWN ARE AS REQUIRED TO MEET FIXTURE LOCATIONS AND QUANTITIES SHOWN ARE AS REQUIRED TO MEET 2014 FLORIDA BUILDING CODE REQUIREMENTS FOR WATTS PER SQUARE FOOT. TASK LIGHTING MAY BE REQUIRED TO MEET MINIMUM RECOMMENDED ILLUMINATION LEVELS PER IES STANDARDS. 12. CIRCUITING SHOWN IS BASED ON RECORD DRAWINGS AND PANEL SCHEDULES. FIELD VERIFY LOCATION AND LOADING OF EXISTING LIGHT CIRCUITS AND REUSE CIRCUITING AS REQUIRED. 13. ADDITIONAL BATTERY PACKS ARE REQUIRED FOR RELOCATED 'A1E' FIXTURES AND EXISTING CORRIDOR LIGHT FIXTURES. PROVIDE TWENTY-THREE (23) NEW BATTERY PACKS PER LIGHTING FIXTURE SCHEDULE, SHEET E4.1.
AutoCAD SHX Text
S
AutoCAD SHX Text
V
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
A1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1E
AutoCAD SHX Text
RL
AutoCAD SHX Text
A1
AutoCAD SHX Text
RL
AutoCAD SHX Text
A1
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
A1
AutoCAD SHX Text
A1
AutoCAD SHX Text
G2
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
2
AutoCAD SHX Text
EX
AutoCAD SHX Text
1
AutoCAD SHX Text
3
AutoCAD SHX Text
EX
AutoCAD SHX Text
D
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
V
AutoCAD SHX Text
4
AutoCAD SHX Text
'LCS1'
AutoCAD SHX Text
3
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
4
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
4
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
RL
AutoCAD SHX Text
A1
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
4
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
5
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
5
AutoCAD SHX Text
V
AutoCAD SHX Text
V
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
5
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
6
AutoCAD SHX Text
6
AutoCAD SHX Text
K
AutoCAD SHX Text
RL
AutoCAD SHX Text
K
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
TO CKT. H1A-19 (VIA 'LCS1')
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
4
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
J
AutoCAD SHX Text
J
AutoCAD SHX Text
J
AutoCAD SHX Text
7
AutoCAD SHX Text
7
AutoCAD SHX Text
7
AutoCAD SHX Text
7
AutoCAD SHX Text
J
AutoCAD SHX Text
7
AutoCAD SHX Text
J
AutoCAD SHX Text
7
AutoCAD SHX Text
TO CKT. H1A-21
AutoCAD SHX Text
H1A-27
AutoCAD SHX Text
TO CKT. H1A-23 (VIA 'LCS1')
AutoCAD SHX Text
H1A-25
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
J
AutoCAD SHX Text
7
AutoCAD SHX Text
H1A-33
AutoCAD SHX Text
H1A-35 (VIA 'LCS1')
AutoCAD SHX Text
J
AutoCAD SHX Text
7
AutoCAD SHX Text
H1A-31
AutoCAD SHX Text
8
AutoCAD SHX Text
NL
AutoCAD SHX Text
NL
AutoCAD SHX Text
NL
AutoCAD SHX Text
NL
AutoCAD SHX Text
NL
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
G2
AutoCAD SHX Text
G2
AutoCAD SHX Text
G2
AutoCAD SHX Text
G2
AutoCAD SHX Text
G2
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
V
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
RL
AutoCAD SHX Text
A2
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1E
AutoCAD SHX Text
1
AutoCAD SHX Text
G1
AutoCAD SHX Text
G1
AutoCAD SHX Text
K
AutoCAD SHX Text
K
AutoCAD SHX Text
L
AutoCAD SHX Text
L
AutoCAD SHX Text
L
AutoCAD SHX Text
L
AutoCAD SHX Text
NL
AutoCAD SHX Text
S
AutoCAD SHX Text
V
AutoCAD SHX Text
S
AutoCAD SHX Text
V
AutoCAD SHX Text
C
AutoCAD SHX Text
C
AutoCAD SHX Text
C
AutoCAD SHX Text
C
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
N
AutoCAD SHX Text
N
A
B
C
D
1 2 3 4 5 6 7 8
SCALE: 1/8" = 1'-0"
0 8' 16'
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&RR
S&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.comArch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E3.1
PO
WE
R P
LA
N - 1S
T F
LO
OR
JLS
N
SCALE: 1/8" = 1'-0"
POWER PLAN - 1ST FLOOR
SPECIFIC NOTES:
GENERAL NOTES:
W
W
W
160
STAIRS
125
STAIRS
101
WAITING
105
MEETING
ROOM
ELEV
104
FOYER
106
WOMEN
107
MEN
156
TRAINING
ROOM
155
FOYER
159
MEN
158
WOMEN
126
SHOWER
ROOM
122
JAN.
123
MEN
124
WOMEN
121
CORR.
161
COMM.
ROOM
140
ELEC.
114
DOH
IT
144
BREAK
ROOM
118
BREAK
ROOM
157
JAN.
171
STOR.
CASHIER
110
DOH
112
OFFICE
113
OFFICE
132
OFFICE
133
OFFICE
136
OFFICE
137
OFFICE
127
OFFICE
128
OFFICE
130
OFFICE
131
OFFICE
134
OFFICE
135
OFFICE
138
OFFICE
139
OFFICE
170
OFFICE
168
OFFICE
166
OFFICE
164
OFFICE
163
OFFICE
167
OFFICE
117
PLAN
ROOM
148
OFFICE
149
OFFICE
154
MECH.
ROOM
151
OFFICE
152
OFFICE
150
OFFICE
147
OFFICE
143
CORR.
146
CORR.
165
CORR.
16
2
CO
RR
.
145
CORR.
15
3
CO
RR
.
14
1
CO
RR
.
129
CORR.
108
CORR.
11
6
CO
RR
.
102
INTAKE
103
INTAKE
142
CORR.
109
SCANNING
111
OFFICE
169
OFFICE
119
STOR.
120
STOR.
109A
COPY
115
CORR.
A1 A3 A5 A7
A6A4A2
B5 B3 B1
B4 B2
C4 C2
C5 C3 C1
A9
A8 A10
2/12/2018 11:40:41 AM, Simes & Rosch, LLC
AutoCAD SHX Text
'HM1'
AutoCAD SHX Text
'H1A'
AutoCAD SHX Text
'P1B'
AutoCAD SHX Text
'P1C'
AutoCAD SHX Text
'T1A'
AutoCAD SHX Text
'P1A'
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
HM1-31 VAV-1-13
AutoCAD SHX Text
HM1-27 FTU-1-09
AutoCAD SHX Text
HM1-33 FTU-1-15
AutoCAD SHX Text
HM1-35 FTU-1-18
AutoCAD SHX Text
EXISTING ELECTRICAL ROOM FOR FIRST FLOOR. SEE POWER RISER DIAGRAM ON SHEET E5.1 FOR MORE INFORMATION. ALL TELECOM CABLING THROUGHOUT THE FIRST FLOOR (EXCEPT THE DOH AREA MENTIONED BELOW) SHALL BE ROUTED VIA EXISTING CABLE TRAY TO THE TELECOM RACK IN COMM ROOM 161. SEE SHEET E3.2 FOR MORE INFORMATION. PROVIDE NEW 2-POST TELECOM RACK WITH CAT 6 PATCH PANELS PER COUNTY STANDARDS. SEE DETAIL 4, SHEET E6.2 FOR MORE INFORMATION. CONFIRM EXACT LOCATION AND ELECTRICAL REQUIREMENTS FOR TICKET KIOSK. SEE SHEET A1.1 FOR MORE INFORMATION. CONFIRM EXACT LOCATION OF ALL NEW TELECOM WORKSTATION AND TV OUTLETS. SEE INTERIOR ELEVATIONS 3 & 4 ON SHEET A6.5 (TYP.). ROUTE CONDUIT FOR SECURITY COUNTER BENEATH RAISED FLOOR. COORDINATE ROUTING WITH ARCHITECT AND GENERAL CONTRACTOR. ALL TELECOM CABLING WITHIN THE DOH AREA (ROOMS 110-114) SHALL BE ROUTED TO THE EXISTING TELECOM RACK IN CLOSET 114. ALSO, PROTECT ALL EXISTING EQUIPMENT IN DOH I.T. CLOSET 114 DURING CONSTRUCTION. ANY EXISTING EQUIPMENT THAT MAY BE IMPACTED BY DOOR RELOCATION SHALL BE MOVED TO AN ADJACENT WALL WITHIN ROOM AS NECESSARY. COORDINATE WITH COUNTY. NOTE THAT FTU-1-09 IS BEING REPLACED & RELOCATED. PROVIDE NEW CIRCUIT, AS SHOWN. MONITOR WILL BE SUPPORTED FROM CEILING BY COUNTY. COORDINATE MOUNTING LOCATION AND CONFIGURATION OF RECEPTACLE AND TV OUTLET WITH COUNTY (TYP.).
AutoCAD SHX Text
1. SIZE OF DISCONNECTS, CIRCUIT BREAKERS, WIRING AND CONDUIT FOR HVAC AND OTHER MECHANICAL EQUIPMENT IS BASED ON THE MECHANICAL BASIS OF DESIGN. IF THE ELECTRICAL DATA VARIES FROM MECHANICAL SCHEDULES, RESIZE THE RELATED ELECTRICAL COMPONENTS PER THE NEC AND MANUFACTURER'S RECOMMENDATIONS AND SUBMIT FOR APPROVAL. 2. PROVIDE HEATING, AIR CONDITIONING, AND REFRIGERATION (HACR) RATED CIRCUIT BREAKERS FOR ALL NEW VAV'S AND FTU'S. 3. RECEPTACLES WHICH ARE BACK-TO-BACK ON A COMMON WALL SHALL BE OFFSET 6" MINIMUM TO AVOID SOUND TRANSMISSION. 4. CONFIRM LOCATION, MOUNTING HEIGHT, AND ELECTRICAL REQUIREMENTS FOR ALL SPECIAL PURPOSE AND DEDICATED OUTLETS WITH COUNTY. CONFIRM EXACT LOCATION FOR OUTLETS NEAR CABINETS WITH ARCHITECTURAL INTERIOR ELEVATIONS AND CABINET PROVIDER. 5. SAFETY SWITCHES SHALL BE HEAVY DUTY, FUSED OR NON-FUSED AS INDICATED, QUICK-MAKE AND QUICK-BREAK, HORSEPOWER RATED, MINIMUM RATING 250 0R 600 VOLTS A.C., AS APPROPRIATE.
AutoCAD SHX Text
1
AutoCAD SHX Text
6. PROVIDE 120V POWER TO ALL 24V CONTROL TRANSFORMERS. 24V CONTROL CIRCUITS, TRANSFORMERS, AND CONTROL PANELS ARE PROVIDED BY DIVISION 23. 7. NOTE THAT VARIABLE AIR VOLUME (VAV) UNITS, FAN TERMINAL UNITS (FTU'S), AND THE NEW EXHAUST FAN COME WITH FACTORY-PROVIDED INTEGRAL DISCONNECTS (NOT SHOWN). 8. ONLY NEW CIRCUITS ARE SHOWN. SEE EXISTING POWER, MECHANICAL PLANS AND SCHEDULES IN RECORD DRAWINGS FOR EXISTING CIRCUITS, HVAC EQUIPMENT, ETC. THAT ARE TO REMAIN. 9. PROVIDE TELECOMMUNICATIONS WORKSTATION OUTLETS WHERE SHOWN PER DETAIL 6, SHEET E6.2. NOTE THAT EXISTING WORKSTATION OUTLETS MAY EXIST AT LOCATIONS SHOWN. FOR THESE EXISTING OUTLETS, THE EXISTING BOXES AND CONDUIT MAY BE REUSED, BUT PROVIDE NEW JACKS, CABLING AND FACEPLATES. FOR BIDDING PURPOSES ASSUME THAT 10% OF LOCATIONS SHOWN ARE EXISTING. ALSO, FOR BIDDING PURPOSES, PROVIDE AN ADDITIONAL 10 OUTLETS AND CABLING IN LOCATIONS TO BE DETERMINED BY COUNTY. 10. SEE SYSTEMS PLAN FOR LOCATIONS OF SECURITY DEVICES.
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1B-23
AutoCAD SHX Text
P1B-21
AutoCAD SHX Text
P1B-15
AutoCAD SHX Text
P1B-32 FAX
AutoCAD SHX Text
P1B-39
AutoCAD SHX Text
P1B-37
AutoCAD SHX Text
P1A-13
AutoCAD SHX Text
P1A-15
AutoCAD SHX Text
P1A-17
AutoCAD SHX Text
P1A-19
AutoCAD SHX Text
P1A-25
AutoCAD SHX Text
P1A-27
AutoCAD SHX Text
30"
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1A-22 REFRIG.
AutoCAD SHX Text
P1A-29
AutoCAD SHX Text
P1A-31
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1A-33
AutoCAD SHX Text
P1A-9
AutoCAD SHX Text
P1A-3
AutoCAD SHX Text
P1A-1
AutoCAD SHX Text
P1A-7
AutoCAD SHX Text
P1A-5
AutoCAD SHX Text
P1A-16 MONITOR
AutoCAD SHX Text
P1B-1
AutoCAD SHX Text
P1B-11
AutoCAD SHX Text
P1B-3
AutoCAD SHX Text
P1B-5
AutoCAD SHX Text
P1B-7
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1B-41
AutoCAD SHX Text
P1C-12 EX.EWCEWC
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1B-2
AutoCAD SHX Text
P1B-4
AutoCAD SHX Text
P1B-6
AutoCAD SHX Text
P1B-28 FAX
AutoCAD SHX Text
P1B-14
AutoCAD SHX Text
P1B-10
AutoCAD SHX Text
P1B-9
AutoCAD SHX Text
P1A-34 COPIER
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1A-35
AutoCAD SHX Text
P1A-8
AutoCAD SHX Text
P1A-6
AutoCAD SHX Text
P1A-4
AutoCAD SHX Text
P1A-2
AutoCAD SHX Text
P1A-41
AutoCAD SHX Text
P1A-39
AutoCAD SHX Text
P1A-37
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1A-14
AutoCAD SHX Text
P1A-12
AutoCAD SHX Text
P1A-10
AutoCAD SHX Text
1
AutoCAD SHX Text
TV
AutoCAD SHX Text
TV
AutoCAD SHX Text
60"
AutoCAD SHX Text
60"
AutoCAD SHX Text
EX
AutoCAD SHX Text
P1B-12
AutoCAD SHX Text
60"
AutoCAD SHX Text
60"
AutoCAD SHX Text
P1A-32 COPIER
AutoCAD SHX Text
P1B-26 COPIER
AutoCAD SHX Text
P1-8
AutoCAD SHX Text
P1B-30 COPIER
AutoCAD SHX Text
P1B-13
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
P1B-36 KIOSK
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
EX
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
TV
AutoCAD SHX Text
TV
AutoCAD SHX Text
TV
AutoCAD SHX Text
72"
AutoCAD SHX Text
72"
AutoCAD SHX Text
P1B-24 MONITOR
AutoCAD SHX Text
P1A-20 MONITOR
AutoCAD SHX Text
P1B-16
AutoCAD SHX Text
P1A-21
AutoCAD SHX Text
P1A-18 SECURITY
AutoCAD SHX Text
P1A-36 COPIER
AutoCAD SHX Text
6
AutoCAD SHX Text
5
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
WAP
AutoCAD SHX Text
WAP
AutoCAD SHX Text
WAP
AutoCAD SHX Text
WAP
AutoCAD SHX Text
2
AutoCAD SHX Text
7
AutoCAD SHX Text
80"
AutoCAD SHX Text
P1B-38 RACK
AutoCAD SHX Text
8
AutoCAD SHX Text
8
AutoCAD SHX Text
P1C-11,13 ACS PNLS
AutoCAD SHX Text
P1C-7,9 ACS PNLS
AutoCAD SHX Text
5
AutoCAD SHX Text
9
AutoCAD SHX Text
9
AutoCAD SHX Text
9
A
B
C
D
1 2 3 4 5 6 7 8
SCALE: 1/8" = 1'-0"
0 8' 16'
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&RR
S&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.comArch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E3.2
SY
ST
EM
S P
LA
N - 1S
T F
LO
OR
JLS
N
SCALE: 1/8" = 1'-0"
SYSTEMS PLAN - 1ST FLOOR
SPECIFIC NOTES:
GENERAL NOTES:
160
STAIRS
125
STAIRS
101
WAITING
105
MEETING
ROOM
ELEV
104
FOYER
106
WOMEN
107
MEN
156
TRAINING
ROOM
155
FOYER
159
MEN
158
WOMEN
126
SHOWER
ROOM
122
JAN.
123
MEN
124
WOMEN
121
CORR.
161
COMM.
ROOM
140
ELEC.
114
DOH
IT
144
BREAK
ROOM
118
BREAK
ROOM
157
JAN.
171
STOR.
CASHIER
110
DOH
112
OFFICE
113
OFFICE
132
OFFICE
133
OFFICE
136
OFFICE
137
OFFICE
127
OFFICE
128
OFFICE
130
OFFICE
131
OFFICE
134
OFFICE
135
OFFICE
138
OFFICE
139
OFFICE
170
OFFICE
168
OFFICE
166
OFFICE
164
OFFICE
163
OFFICE
167
OFFICE
117
PLAN
ROOM
148
OFFICE
149
OFFICE
154
MECH.
ROOM
151
OFFICE
152
OFFICE
150
OFFICE
147
OFFICE
143
CORR.
146
CORR.
165
CORR.
16
2
CO
RR
.
145
CORR.
15
3
CO
RR
.
14
1
CO
RR
.
129
CORR.
108
CORR.
11
6
CO
RR
.
102
INTAKE
103
INTAKE
142
CORR.
109
SCANNING
111
OFFICE
169
OFFICE
119
STOR.
120
STOR.
109A
COPY
115
CORR.
A1 A3 A5 A7
A6A4A2
B5 B3 B1
B4 B2
C4 C2
C5 C3 C1
A9
A8 A10
103
INTAKE
LEGEND:
2/12/2018 11:40:44 AM, Simes & Rosch, LLC
AutoCAD SHX Text
'HM1'
AutoCAD SHX Text
'H1A'
AutoCAD SHX Text
'P1B'
AutoCAD SHX Text
'P1C'
AutoCAD SHX Text
'T1A'
AutoCAD SHX Text
'P1A'
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
EXISTING CABLE TRAY SHOWN FOR INFORMATION PURPOSES. ROUTING AND SIZING SHOULD BE FIELD CONFIRMED. ROUTE ALL NEW TELECOM CABLING TO MAIN TELECOM ROOM 161 VIA TRAY. CONFIRM CABLE TRAY FILL DOES NOT EXCEED 50%. NOTIFY ENGINEER BEFORE PROCEEDING IF THIS IS NOT THE CASE. EXISTING ACCESS CONTROL SYSTEM PANELS TO REMAIN. ROUTE ALL NEW ACCESS CONTROL SYSTEM CABLING TO ROOM 161. PROVIDE FOUR (4) NEW APOLLO AIM-4SL DOOR INTERFACE MODULES FOR NEW CARD READERS. CCTV CAMERA LOCATIONS AND QUANTITIES ARE PRELIMINARY. PROVIDE ADDITIONAL CAMERAS AS NECESSARY FOR PROPER COVERAGE (TYP.).
AutoCAD SHX Text
1. SEE POWER PLAN, SHEET E3.1, FOR LOCATION OF NEW TELECOMMUNICATIONS SEE POWER PLAN, SHEET E3.1, FOR LOCATION OF NEW TELECOMMUNICATIONS WORK STATION OUTLETS. SEE FIRE ALARM PLAN, FA1.1, FOR LOCATION OF FIRE ALARM DEVICES. 2. PROVIDE A TURN-KEY ACCESS CONTROL SYSTEM FOR THE 1ST FLOOR PER PROVIDE A TURN-KEY ACCESS CONTROL SYSTEM FOR THE 1ST FLOOR PER SPECIFICATIONS SECTION 281300 AND DETAILS. PROVIDE NEW DOOR INTERFACE MODULES, CARD READERS, CABLING, BOXES, RACEWAYS AND RELATED POWER. SEE ARCHITECTURAL DOOR SCHEDULES FOR LOCATIONS OF REQUEST TO EXIT DEVICES. ACS EQUIPMENT SHALL BE AS FOLLOWS TO MATCH THE REST OF THE BUILDING (NO SUBSTITUTIONS WILL BE CONSIDERED): - DOOR INTERFACE MODULE: APOLLO AIM-4SL - ACS PROXIMITY CARD READERS: HID ICLASS R10, BASE PART NUMBER 900N EHL. - ACS PROXIMITY AND BIOMETRIC CARD READERS: SUPREMA BIOENTRY W2 (WITH OUTDOOR VANDAL-PROOF FINGERPRINT TERMINAL). - DOOR CONTACTS: ARITECH 1076 STEEL DOOR CONTACTS. 3. PROVIDE A TURN-KEY CLOSED CIRCUIT TELEVISION (CCTV) SURVEILLANCE SYSTEM PROVIDE A TURN-KEY CLOSED CIRCUIT TELEVISION (CCTV) SURVEILLANCE SYSTEM FOR THE 1ST FLOOR PER SPECIFICATIONS SECTION 282300. REUSE EXISTING HEAD END EQUIPMENT IN ROOM 161. PROVIDE NEW POWER OVER ETHERNET (PoE) COLOR CAMERAS, CABLING, BOXES, RACEWAYS AND RELATED POWER. CONFIRM CAMERA LOCATIONS WITH COUNTY. EQUIPMENT SHALL BE AS FOLLOWS TO MATCH THE REST OF THE BUILDING (NO SUBSTITUTIONS WILL BE CONSIDERED): - CAMERAS: HIKVISION DS-2CD2142FWD-IS
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
EX
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
FIXED MOUNT POE DOME CAMERA.
AutoCAD SHX Text
B
AutoCAD SHX Text
CR
AutoCAD SHX Text
360° PAN/TILT/ZOOM POE DOME CAMERA.
AutoCAD SHX Text
360° PAN/TILT/ZOOM POE DOME CAMERAWITH EXTERIOR CORNER MOUNT BRACKET.
AutoCAD SHX Text
WALL MOUNTED PROXIMITY AND BIOMETRIC CARD READER
AutoCAD SHX Text
WALL MOUNTED PROXIMITY CARD READER.
AutoCAD SHX Text
CR
AutoCAD SHX Text
B
AutoCAD SHX Text
CR
AutoCAD SHX Text
B
AutoCAD SHX Text
CR
AutoCAD SHX Text
B
AutoCAD SHX Text
CR
AutoCAD SHX Text
B
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
3
AutoCAD SHX Text
3
AutoCAD SHX Text
3
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E4.1
ELE
CT
RIC
AL S
CH
ED
ULE
S
JLS
LIGHTING FIXTURE SCHEDULE
NOTES:
2/12/2018 9:29:44 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
MARK
AutoCAD SHX Text
MANUF.
AutoCAD SHX Text
CATALOG NUMBER
AutoCAD SHX Text
LAMPS
AutoCAD SHX Text
VOLT.
AutoCAD SHX Text
MOUNTING
AutoCAD SHX Text
FINISH
AutoCAD SHX Text
WATTS
AutoCAD SHX Text
NOTES
AutoCAD SHX Text
DESCRIPTION / INSTALLATION
AutoCAD SHX Text
NO
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
A1
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
2 LAMP PARABOLIC
AutoCAD SHX Text
2
AutoCAD SHX Text
T8-U
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
64 W
AutoCAD SHX Text
8
AutoCAD SHX Text
EXISTING 2'x2' 2-LAMP FLUORESCENT PARABOLIC FIXTURE TO BE
AutoCAD SHX Text
REMOVED TO ALLOW INSTALLATION OF NEW CEILING SYSTEM AND
AutoCAD SHX Text
REINSTALLED IN LOCATIONS SHOWN.
AutoCAD SHX Text
A1E
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
2 LAMP PARABOLIC
AutoCAD SHX Text
EMERGENCY
AutoCAD SHX Text
2
AutoCAD SHX Text
T8-U
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
64 W
AutoCAD SHX Text
8,9
AutoCAD SHX Text
EXISTING 2'x2' 2-LAMP FLUORESCENT PARABOLIC FIXTURE WITH
AutoCAD SHX Text
EMERGENCY BATTERY PACK TO BE REMOVED TO ALLOW
AutoCAD SHX Text
INSTALLATION OF NEW CEILING SYSTEM AND REINSTALLED IN
AutoCAD SHX Text
LOCATIONS SHOWN.
AutoCAD SHX Text
A2
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
3 LAMP PARABOILC
AutoCAD SHX Text
3
AutoCAD SHX Text
T8-U
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
96 W
AutoCAD SHX Text
8
AutoCAD SHX Text
EXISTING 2'x2' 2-LAMP FLUORESCENT PARABOLIC FIXTURE TO BE
AutoCAD SHX Text
REMOVED TO ALLOW INSTALLATION OF NEW CEILING SYSTEM AND
AutoCAD SHX Text
REINSTALLED IN LOCATIONS SHOWN.
AutoCAD SHX Text
B1
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
PENDANT MOUNTED LINEAR
AutoCAD SHX Text
2
AutoCAD SHX Text
T5
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
PENDANT,
AutoCAD SHX Text
10' A.F.F.
AutoCAD SHX Text
108 W
AutoCAD SHX Text
EXISTING PENDANT MOUNTED LINEAR FLUORESCENT FIXTURE TO
AutoCAD SHX Text
REMAIN.
AutoCAD SHX Text
C
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
WRAPAROUND
AutoCAD SHX Text
2
AutoCAD SHX Text
T8
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
SURFACE
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
64 W
AutoCAD SHX Text
EXISTING SURFACE MOUNTED FLUORESCENT WRAPAROUND FIXTURE
AutoCAD SHX Text
TO BE RELOCATED.
AutoCAD SHX Text
F1
AutoCAD SHX Text
DAYBRITE
AutoCAD SHX Text
2LP3GA231U-9-1/2EB-UNV
AutoCAD SHX Text
2
AutoCAD SHX Text
T8-U
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
64 W
AutoCAD SHX Text
2'x2' 2-LAMP FLUORESCENT PARABOLIC FIXTURE TO MATCH
AutoCAD SHX Text
EXISTING.
AutoCAD SHX Text
F2
AutoCAD SHX Text
DAYBRITE
AutoCAD SHX Text
2LP3GA331U-9-1/3EB-UNV
AutoCAD SHX Text
3
AutoCAD SHX Text
T8-U
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
96 W
AutoCAD SHX Text
2'x2' 3-LAMP FLUORESCENT PARABOLIC FIXTURE TO MATCH
AutoCAD SHX Text
EXISTING.
AutoCAD SHX Text
F3
AutoCAD SHX Text
DAYBRITE
AutoCAD SHX Text
2DLG-38L-840-2-D-UNV-DIM
AutoCAD SHX Text
LED
AutoCAD SHX Text
CRI 85+
AutoCAD SHX Text
4000K
AutoCAD SHX Text
UNV
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
39 W
AutoCAD SHX Text
2'x2' HIGH EFFICIENCY VOLUMETRIC LED TROFFER (3,800 LUMENS)
AutoCAD SHX Text
WITH DIMMABLE ELECTRONIC DRIVER AND ACRYLIC LENS.
AutoCAD SHX Text
G1
AutoCAD SHX Text
FINELITE
AutoCAD SHX Text
S10-WSB-8'-2T8-SC-EP-OPEN-
AutoCAD SHX Text
UNV-FE
AutoCAD SHX Text
4
AutoCAD SHX Text
T8 HI-LUM
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
PENDANT,
AutoCAD SHX Text
10' A.F.F.
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
110 W
AutoCAD SHX Text
6
AutoCAD SHX Text
8' LINEAR DIRECT/INDIRECT FLUORESCENT FIXTURE WITH 2-2
AutoCAD SHX Text
LAMP HIGH EFFICIENCY ELECTRONIC BALLASTS, WHITE CROSS
AutoCAD SHX Text
BLADE BAFFLE, AND SPECULAR REFLECTOR SYSTEM.
AutoCAD SHX Text
G1E
AutoCAD SHX Text
FINELITE
AutoCAD SHX Text
S10-WSB-8'-2T8-SC-EP-OPEN-
AutoCAD SHX Text
UNV-FE-EM
AutoCAD SHX Text
4
AutoCAD SHX Text
T8 HI-LUM
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
PENDANT,
AutoCAD SHX Text
10' A.F.F.
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
110 W
AutoCAD SHX Text
6
AutoCAD SHX Text
8' LINEAR DIRECT/INDIRECT FLUORESCENT FIXTURE WITH 2-2
AutoCAD SHX Text
LAMP HIGH EFFICIENCY ELECTRONIC BALLASTS, WHITE CROSS
AutoCAD SHX Text
BLADE BAFFLE, SPECULAR REFLECTOR SYSTEM, AND EM. BATTERY
AutoCAD SHX Text
PACK.
AutoCAD SHX Text
G2
AutoCAD SHX Text
FINELITE
AutoCAD SHX Text
S10-WSB-4'-2T8-SC-EP-OPEN-
AutoCAD SHX Text
UNV-FE-EM
AutoCAD SHX Text
2
AutoCAD SHX Text
T8 HI-LUM
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
PENDANT,
AutoCAD SHX Text
10' A.F.F.
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
56 W
AutoCAD SHX Text
6
AutoCAD SHX Text
4' LINEAR DIRECT/INDIRECT FLUORESCENT FIXTURE WITH 1-2
AutoCAD SHX Text
LAMP HIGH EFFICIENCY ELECTRONIC BALLAST, WHITE CROSS BLADE
AutoCAD SHX Text
BAFFLE, SPECULAR REFLECTOR SYSTEM, AND EM. BATTERY PACK.
AutoCAD SHX Text
H
AutoCAD SHX Text
LIGHTOLIER
AutoCAD SHX Text
4F23242ASNU-4SB124
AutoCAD SHX Text
2
AutoCAD SHX Text
42W CFL
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
CBA
AutoCAD SHX Text
84 W
AutoCAD SHX Text
3
AutoCAD SHX Text
DECORATIVE PENDANT MOUNT FIXTURE TO MATCH EXISTING.
AutoCAD SHX Text
J
AutoCAD SHX Text
DAYBRITE
AutoCAD SHX Text
CB217WCFB-UNV
AutoCAD SHX Text
2
AutoCAD SHX Text
T8
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
WALL
AutoCAD SHX Text
WHITE
AutoCAD SHX Text
34 W
AutoCAD SHX Text
2' LINEAR FLUORESCENT VANITY FIXTURE WITH 2 LAMP HIGH
AutoCAD SHX Text
EFFICIENCY ELECTRONIC BALLAST.
AutoCAD SHX Text
K
AutoCAD SHX Text
LIGHTOLIER
AutoCAD SHX Text
8038CFW-226-S2242HU
AutoCAD SHX Text
2
AutoCAD SHX Text
26W CFL
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
MATCH
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
52 W
AutoCAD SHX Text
8" COMPACT FLUORESCENT HORIZONTAL DOWN LIGHT WITH
AutoCAD SHX Text
ELECTRONIC BALLAST AND SELF-FLANGED CLEAR SPECULAR
AutoCAD SHX Text
REFLECTOR.
AutoCAD SHX Text
KE
AutoCAD SHX Text
LIGHTOLIER
AutoCAD SHX Text
8038CFW-226-S2242HU-EM
AutoCAD SHX Text
2
AutoCAD SHX Text
26W CFL
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
MATCH
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
52 W
AutoCAD SHX Text
8" COMPACT FLUORESCENT HORIZONTAL DOWN LIGHT WITH
AutoCAD SHX Text
ELECTRONIC BALLAST, CLEAR SPECULAR REFLECTOR, AND INTEGRAL
AutoCAD SHX Text
700 LUMEN EMERGENCY BATTERY PACK AND TEST SWITCH.
AutoCAD SHX Text
L
AutoCAD SHX Text
LIGHTOLIER
AutoCAD SHX Text
8038CFW-232-S2242HU
AutoCAD SHX Text
2
AutoCAD SHX Text
32W CFL
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
MATCH
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
64 W
AutoCAD SHX Text
8" COMPACT FLUORESCENT HORIZONTAL DOWN LIGHT WITH
AutoCAD SHX Text
ELECTRONIC BALLAST AND SELF LANGED CLEAR SPECULAR
AutoCAD SHX Text
REFLECTOR.
AutoCAD SHX Text
LE
AutoCAD SHX Text
LIGHTOLIER
AutoCAD SHX Text
8038CFW-232-S2242HU-EM
AutoCAD SHX Text
2
AutoCAD SHX Text
32W CFL
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4100K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
MATCH
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
64 W
AutoCAD SHX Text
8" COMPACT FLOURESCENT DEOWN LIGHT WITH CLEAR SELF
AutoCAD SHX Text
BFLANGED ALUMINUM REFLECTOR AND 90 MINUTE EMERGENCY
AutoCAD SHX Text
INVERTER
AutoCAD SHX Text
M
AutoCAD SHX Text
LIGHTOLIER
AutoCAD SHX Text
FRAME: C6L-10-N-U-VB-Z10V
AutoCAD SHX Text
TRIM:
AutoCAD SHX Text
C6L-10-DL-40K-M-CL-P-VB
AutoCAD SHX Text
1
AutoCAD SHX Text
LED
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4000K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
MATCH
AutoCAD SHX Text
EXISTING
AutoCAD SHX Text
13 W
AutoCAD SHX Text
8" LED DOWN LIGHT WITH DIMMABLE ELECTRONIC DRIVER AND
AutoCAD SHX Text
SELF-FLANGED CLEAR SPECULAR REFLECTOR.
AutoCAD SHX Text
N
AutoCAD SHX Text
LITON
AutoCAD SHX Text
FRAME: LHLD3-08C70-DLV-T40
AutoCAD SHX Text
TRIM: LRLD321-SN-B45
AutoCAD SHX Text
1
AutoCAD SHX Text
LED
AutoCAD SHX Text
CRI 80+
AutoCAD SHX Text
4000K
AutoCAD SHX Text
277V
AutoCAD SHX Text
RECESSED
AutoCAD SHX Text
CLEAR
AutoCAD SHX Text
SPECULAR
AutoCAD SHX Text
8 W
AutoCAD SHX Text
3" LED DOWN LIGHT WITH DIMMABLE ELECTRONIC DRIVER AND
AutoCAD SHX Text
SELF-FLANGED CLEAR SPECULAR REFLECTOR.
AutoCAD SHX Text
1. UNLESS INDICATED OTHERWISE, MANUFACTURERS AND CATALOG NUMBERS LISTED IN
AutoCAD SHX Text
LIGHTING FIXTURE SCHEDULE ARE INTENDED TO ESTABLISH STANDARDS OF DESIRED DESIGN OR
AutoCAD SHX Text
QUALITY AND SHALL BE THE BASIS OF BID. ALTERNATIVES MAY BE SUBMITTED FOR
AutoCAD SHX Text
CONSIDERATION DURING THE SUBMITTAL REVIEW PROCESS.
AutoCAD SHX Text
2. SEE ARCHITECTURAL ELEVATIONS FOR MOUNTING HEIGHTS FOR WALL MOUNTED FIXTURES.
AutoCAD SHX Text
3. COLOR BY ARCHITECT (CBA).
AutoCAD SHX Text
4. FOR RECESSED CAN LIGHTS, IF LIGHT FIXTURE IS TOUCHING INSULATION, MODIFY CATALOG
AutoCAD SHX Text
NUMBER SHOWN ABOVE AS NECESSARY TO PROVIDE INSULATED CEILING (I.C.) RATED LIGHT
AutoCAD SHX Text
FIXTURE OR PROVIDE NECESSARY PROTECTION FROM INSULATION, PER AHJ.
AutoCAD SHX Text
5. MODIFY CATALOG NUMBER AS NECESSARY FOR ALL RECESSED
AutoCAD SHX Text
FIXTURES IN AREAS WITH HARD CEILINGS.
AutoCAD SHX Text
6. COORDINATE WITH FACTORY TO ENSURE FIXTURE ROWS ARE PROPERLY
AutoCAD SHX Text
SPECIFIED AND CONSTRUCTED.
AutoCAD SHX Text
7. PROVIDE PROGRAMMED RAPID START BALLASTS FOR ALL FLOURESCENT
AutoCAD SHX Text
FIXTURES CONTROLLED BY OCCUPANCY SENSOR.
AutoCAD SHX Text
8. FIXTURES TO BE RELOCATED WILL BE MARKED WITH "RL".
AutoCAD SHX Text
9. PROVIDE 23 ADDITIONAL 1,400 LUMEN BATTERY PACKS TO CHANGE
AutoCAD SHX Text
EXISTING 'A1' FIXTURES TO 'A1E' FIXTURES.
AutoCAD SHX Text
10. NOTES THAT DO NOT APPEAR IN NOTES COLUMN OF THE SCHEDULE
AutoCAD SHX Text
APPLY TO ALL FIXTURE TYPES. NOT ALL FIXTURES SHOWN IN SCHEDULE
AutoCAD SHX Text
ARE PART OF THIS PROJECT.
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E4.2
ELE
CT
RIC
AL S
CH
ED
ULE
S
JLS
12 12 1/2 LTG. N. OPEN OFFICE & TRAINING 2.3
12 12 1/2 LTG. NORTH CORRIDORS 2.4
12 12 1/2LTG. 159,161,162,164-168
1.6
12 12 1/2LTG. 142,145-150,152,155-157
1.5
12 12 1/2 LTG. SE OFFICE 2.6
12 12 1/2LTG. 119,120,126-138
2.6
12 12 1/2 LTG. SOUTH CORRIDORS 1.8
12 12 1/2 REC 102 0.8 0.8 REC 133 1/2 12 12
12 12 1/2 REC 102 0.8 1.0 REC 134 1/2 12 12
12 12 1/2 REC 102 0.8 0.8 REC 137 1/2 12 12
12 12 1/2 REC 102 0.8 1.0REC 100, 130, 138
1/2 12 12
12 12 1/2 REC 102 1.0 1.4 REC 131 - 132 1/2 12 12
1.2 REC 135 - 136 1/2 12 12
12 12 1/2REC 109, 109A,104
1.0 1.2REC 101, 102, 139
1/2 12 12
12 12 1/2 REC 109 0.8 0.6 MONITOR 101 1/2 12 12
12 12 1/2 REC 109 0.6 0.6 SECURITY DESK 101 1/2 12 12
12 12 1/2 REC 110 1.2 0.6 MONITOR 104 1/2 12 12
12 12 1/2REC 117, 119, 120
1.2 1.2REFRIGERATOR, 118
1/2 12 12
0.6
10 10 3/4REC 109, 113
1.0
12 12 1/2REC 113, 115, 118
1.2
12 12 1/2REC, COUNTER, 118
0.8
12 12 1/2REC, COUNTER, 118
0.8 1.2COPIER, 120
1/2 12 12 1 20
12 12 1/2 REC 122 - 124 0.6 1.2COPER, 117
1/2 12 12 1 20
12 12 1/2 REC 126 - 127 1.0 1.2COPER, 117
1/2 12 12 1 20
12 12 1/2 REC 128 0.8
12 12 1/2 REC 129 0.8
12 12 1/2 REC 130 1.0
12 12 1/2 REC 103 0.8 0.8 REC 161 3/4 10 10
12 12 1/2 REC 103 0.8 1.0 REC 162 3/4 10 10
12 12 1/2 REC 103 0.8 1.2 REC 164 - 165 1/2 12 12
12 12 1/2 REC 103 0.8 0.8REC 163, 166
1/2 12 12
12 12 1/2 REC 103 1.0 1.2REC 167, 169
1/2 12 12
12 12 1/2REC 101, 103
1.2 0.8 REC 154 1/2 12 12
12 12 1/2REC 144, 145
0.8 0.4 REC 156 1/2 12 12
12 12 1/2 REC 148 1.2 0.8REC 103, 104
1/2 12 12
10 10 3/4 REC 149 0.6
10 10 3/4 REC 150 1.2 0.6MONITOR, 101
1/2 12 12
COPIER, 1451/2 12 12
0.6FAX, 145
1/2 12 12
1.2COPIER, 145
1/2 12 12
0.6FAX, 145
1/2 12 12
0.4 TICKETING KIOSK 1/2 12 12
12 12 1/2 REC 148 0.6 0.5TELECOM RACK, 161
1/2 12 12
12 12 1/2REC 149, 153
1.0
12 12 1/2REC 153, 155 - 157
0.8
12 12 1/2 ACS CONTROLLER 0.2
12 12 1/2 ACS CONTROLLER 0.2
12 12 1/2 ACS CONTROLLER 0.2 0.6 12 12 1/2
12 12 1/2 ACS CONTROLLER 0.2
15 1 12 12 1/2 FTU-1-09 2.0
15 1 SPARE
15 1 12 12 1/2 VAV-1-13 1.0
20 1 12 12 1/2 FTU-1-15 4.1
25 1 10 10 3/4 FTU-1-18 5.3
2/12/2018 11:40:47 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
PANEL LOCATION: 3RD FLR ELECT. RM.
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 3R
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text
1,200A
AutoCAD SHX Text
EX PANEL -
AutoCAD SHX Text
MDP
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
1,200A
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
1,200A
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
480
AutoCAD SHX Text
/277V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text
65K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
1
AutoCAD SHX Text
600
AutoCAD SHX Text
3
AutoCAD SHX Text
350
AutoCAD SHX Text
(2)
AutoCAD SHX Text
1
AutoCAD SHX Text
(2)
AutoCAD SHX Text
3
AutoCAD SHX Text
(2)
AutoCAD SHX Text
PANEL 'H1A'
AutoCAD SHX Text
130.1
AutoCAD SHX Text
184.4
AutoCAD SHX Text
PANEL 'HM1'
AutoCAD SHX Text
3
AutoCAD SHX Text
(2)
AutoCAD SHX Text
1
AutoCAD SHX Text
(2)
AutoCAD SHX Text
350
AutoCAD SHX Text
(2)
AutoCAD SHX Text
3
AutoCAD SHX Text
600
AutoCAD SHX Text
2
AutoCAD SHX Text
125.1
AutoCAD SHX Text
174.9
AutoCAD SHX Text
116.7
AutoCAD SHX Text
164.7
AutoCAD SHX Text
3
AutoCAD SHX Text
SPD
AutoCAD SHX Text
3
AutoCAD SHX Text
40
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
8
AutoCAD SHX Text
130.1
AutoCAD SHX Text
125.1
AutoCAD SHX Text
116.7
AutoCAD SHX Text
184.4
AutoCAD SHX Text
174.9
AutoCAD SHX Text
164.7
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text
895.9
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text
895.9
AutoCAD SHX Text
KVA
AutoCAD SHX Text
PANEL LOCATION: 2ND FLR ELECT. RM.
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 1
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text
600A
AutoCAD SHX Text
EX PANEL -
AutoCAD SHX Text
H1A
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
600A
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
480
AutoCAD SHX Text
/277V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text
65K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
2
AutoCAD SHX Text
E. POLE LIGHTING
AutoCAD SHX Text
2.4
AutoCAD SHX Text
27.5
AutoCAD SHX Text
PANEL 'P1A'
AutoCAD SHX Text
(VIA TX-T1A)
AutoCAD SHX Text
3
AutoCAD SHX Text
125
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
2.4
AutoCAD SHX Text
28.7
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
20
AutoCAD SHX Text
2
AutoCAD SHX Text
E. POLE LIGHTING
AutoCAD SHX Text
1.8
AutoCAD SHX Text
27.5
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
1.8
AutoCAD SHX Text
5.8
AutoCAD SHX Text
AHU-1
AutoCAD SHX Text
3
AutoCAD SHX Text
40
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
E. BOLLARD/FLOOD LTG
AutoCAD SHX Text
3.2
AutoCAD SHX Text
5.8
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
20
AutoCAD SHX Text
2
AutoCAD SHX Text
W. POLE LIGHTING
AutoCAD SHX Text
1.7
AutoCAD SHX Text
5.8
AutoCAD SHX Text
12
AutoCAD SHX Text
13
AutoCAD SHX Text
1.7
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
14
AutoCAD SHX Text
15
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
W. BOLLARD/FLOOD LTG
AutoCAD SHX Text
3.4
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
16
AutoCAD SHX Text
17
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
LTG. STAIRS
AutoCAD SHX Text
0.8
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
18
AutoCAD SHX Text
19
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
LTG. LOBBY
AutoCAD SHX Text
3.2
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
20
AutoCAD SHX Text
21
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
24
AutoCAD SHX Text
25
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
38.4
AutoCAD SHX Text
PANEL 'H2A'
AutoCAD SHX Text
3
AutoCAD SHX Text
150
AutoCAD SHX Text
26
AutoCAD SHX Text
27
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
36.6
AutoCAD SHX Text
28
AutoCAD SHX Text
29
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
LTG. S OPEN OFFICE
AutoCAD SHX Text
3.8
AutoCAD SHX Text
32.8
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
45.1
AutoCAD SHX Text
PANEL 'H3A'
AutoCAD SHX Text
3
AutoCAD SHX Text
200
AutoCAD SHX Text
32
AutoCAD SHX Text
33
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
44.2
AutoCAD SHX Text
34
AutoCAD SHX Text
35
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
40.4
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
SPD
AutoCAD SHX Text
3
AutoCAD SHX Text
40
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
40
AutoCAD SHX Text
41
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
42
AutoCAD SHX Text
* NOTE: EXISTING CIRCUITS AND CIRCUIT BREAKERS TO
AutoCAD SHX Text
REMAIN ARE SHOWN AS FADED. NEW CIRCUITS AND CIRCUIT
AutoCAD SHX Text
BREAKERS ARE SHOWN AS BOLD.
AutoCAD SHX Text
13.3
AutoCAD SHX Text
15.4
AutoCAD SHX Text
12.3
AutoCAD SHX Text
116.8
AutoCAD SHX Text
115.2
AutoCAD SHX Text
106.5
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text
379.4
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text
379.4
AutoCAD SHX Text
KVA
AutoCAD SHX Text
PANEL LOCATION: 1ST FLR ELECT. RM.
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 1
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text
250A
AutoCAD SHX Text
EX PANEL -
AutoCAD SHX Text
P1A
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
250A
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
208
AutoCAD SHX Text
/120V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text
10K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
12
AutoCAD SHX Text
13
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
14
AutoCAD SHX Text
15
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
16
AutoCAD SHX Text
17
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
18
AutoCAD SHX Text
19
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
20
AutoCAD SHX Text
21
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
0.1
AutoCAD SHX Text
PHOTOCELL TIMECLOCK
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
24
AutoCAD SHX Text
25
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
26
AutoCAD SHX Text
27
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
0.6
AutoCAD SHX Text
REC
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
28
AutoCAD SHX Text
29
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
0.6
AutoCAD SHX Text
REC
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
32
AutoCAD SHX Text
33
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
34
AutoCAD SHX Text
35
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPD
AutoCAD SHX Text
3
AutoCAD SHX Text
40
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
40
AutoCAD SHX Text
41
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
42
AutoCAD SHX Text
* NOTE:
AutoCAD SHX Text
THIS PANEL ALSO FEEDS PANEL 'P1B' & 'P1C' VIA
AutoCAD SHX Text
FEED-THRU LUGS. EXISTING CIRCUITS AND CIRCUIT BREAKERS
AutoCAD SHX Text
TO REMAIN ARE SHOWN AS FADED. NEW CIRCUITS AND
AutoCAD SHX Text
CIRCUIT BREAKERS ARE SHOWN AS BOLD.
AutoCAD SHX Text
6.4
AutoCAD SHX Text
6.4
AutoCAD SHX Text
4.8
AutoCAD SHX Text
4.8
AutoCAD SHX Text
6.0
AutoCAD SHX Text
4.5
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text
32.9
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text
74.1
AutoCAD SHX Text
KVA
AutoCAD SHX Text
PANEL LOCATION: 1ST FLR ELECT. RM.
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 1
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text
250A
AutoCAD SHX Text
EX PANEL -
AutoCAD SHX Text
P1B
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
MLO
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
208
AutoCAD SHX Text
/120V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text
10K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
12
AutoCAD SHX Text
13
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
14
AutoCAD SHX Text
15
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
16
AutoCAD SHX Text
17
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC/LTS ELEV PIT
AutoCAD SHX Text
0.5
AutoCAD SHX Text
1.0
AutoCAD SHX Text
REC MDF 159
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
18
AutoCAD SHX Text
19
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC 154
AutoCAD SHX Text
0.5
AutoCAD SHX Text
0.5
AutoCAD SHX Text
REC 159
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
20
AutoCAD SHX Text
21
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
0.2
AutoCAD SHX Text
REC FACP (RM 159)
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
24
AutoCAD SHX Text
25
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC VENDING, 142
AutoCAD SHX Text
1.0
AutoCAD SHX Text
1.2
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
26
AutoCAD SHX Text
27
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC VENDING 142
AutoCAD SHX Text
0.5
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
28
AutoCAD SHX Text
29
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC VENDING 142
AutoCAD SHX Text
1.0
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC VENDING 142
AutoCAD SHX Text
0.5
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
32
AutoCAD SHX Text
33
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC VENDING 142
AutoCAD SHX Text
1.0
AutoCAD SHX Text
0.4
AutoCAD SHX Text
SEC PNLS RM 159
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
35
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC VENDING 142
AutoCAD SHX Text
0.5
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1.8
AutoCAD SHX Text
SUMP PUMP
AutoCAD SHX Text
2
AutoCAD SHX Text
25
AutoCAD SHX Text
40
AutoCAD SHX Text
41
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1.8
AutoCAD SHX Text
42
AutoCAD SHX Text
* NOTE: EXISTING CIRCUITS AND CIRCUIT BREAKERS TO
AutoCAD SHX Text
REMAIN ARE SHOWN AS FADED. NEW CIRCUITS AND CIRCUIT
AutoCAD SHX Text
BREAKERS ARE SHOWN AS BOLD.
AutoCAD SHX Text
5.0
AutoCAD SHX Text
6.1
AutoCAD SHX Text
6.0
AutoCAD SHX Text
4.8
AutoCAD SHX Text
6.0
AutoCAD SHX Text
7.0
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text
34.9
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text
45.0
AutoCAD SHX Text
KVA
AutoCAD SHX Text
PANEL LOCATION: 1ST FLR ELECT. RM.
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 1
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text
250A
AutoCAD SHX Text
EX PANEL -
AutoCAD SHX Text
P1C
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
MLO
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
208
AutoCAD SHX Text
/120V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text
10K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC
AutoCAD SHX Text
0.8
AutoCAD SHX Text
1.0
AutoCAD SHX Text
FCU2/CU2 (ELEC RM)
AutoCAD SHX Text
2
AutoCAD SHX Text
15
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC
AutoCAD SHX Text
0.8
AutoCAD SHX Text
1.0
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1.5
AutoCAD SHX Text
FCU1/CU1 (COMM RM)
AutoCAD SHX Text
2
AutoCAD SHX Text
25
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1.5
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
0.2
AutoCAD SHX Text
DOOR OPERATOR
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
EXISTING EWC
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
12
AutoCAD SHX Text
13
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
1.0
AutoCAD SHX Text
MICROWAVE
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
14
AutoCAD SHX Text
15
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1.2
AutoCAD SHX Text
REF
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
16
AutoCAD SHX Text
17
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
0.5
AutoCAD SHX Text
REC MDF2
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
18
AutoCAD SHX Text
19
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
0.2
AutoCAD SHX Text
REC CHILLER YARD
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
20
AutoCAD SHX Text
21
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
0.2
AutoCAD SHX Text
EF FANS (TOILETS)
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1.2
AutoCAD SHX Text
FCU2
AutoCAD SHX Text
2
AutoCAD SHX Text
15
AutoCAD SHX Text
24
AutoCAD SHX Text
25
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1.2
AutoCAD SHX Text
26
AutoCAD SHX Text
27
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
REC GEN RM
AutoCAD SHX Text
0.2
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
28
AutoCAD SHX Text
29
AutoCAD SHX Text
2
AutoCAD SHX Text
GEN. HEATER
AutoCAD SHX Text
1.0
AutoCAD SHX Text
0.4
AutoCAD SHX Text
SERVER
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
1.0
AutoCAD SHX Text
0.4
AutoCAD SHX Text
SERVER
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
32
AutoCAD SHX Text
33
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
0.6
AutoCAD SHX Text
REC VENDING MACHINE
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
35
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
SPARE
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
40
AutoCAD SHX Text
41
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
42
AutoCAD SHX Text
* NOTE: EXISTING CIRCUITS AND CIRCUIT BREAKERS TO
AutoCAD SHX Text
REMAIN ARE SHOWN AS FADED. NEW CIRCUITS AND CIRCUIT
AutoCAD SHX Text
BREAKERS ARE SHOWN AS BOLD.
AutoCAD SHX Text
2.2
AutoCAD SHX Text
1.2
AutoCAD SHX Text
1.2
AutoCAD SHX Text
5.2
AutoCAD SHX Text
3.2
AutoCAD SHX Text
4.2
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text
17.1
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text
17.1
AutoCAD SHX Text
KVA
AutoCAD SHX Text
PANEL LOCATION: 3RD FLR ELECT. RM.
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
SURFACE MT, NEMA 1
AutoCAD SHX Text
MAIN BUS RATING:
AutoCAD SHX Text
600A
AutoCAD SHX Text
EX PANEL -
AutoCAD SHX Text
HM1
AutoCAD SHX Text
MAIN CB:
AutoCAD SHX Text
600A
AutoCAD SHX Text
FRAME:
AutoCAD SHX Text
TYPE:
AutoCAD SHX Text
BOLT-ON
AutoCAD SHX Text
VOLTAGE:
AutoCAD SHX Text
480
AutoCAD SHX Text
/277V, 3PH, 4 WIRE
AutoCAD SHX Text
MINIMUM AIC:
AutoCAD SHX Text
65K
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
PHASE LOAD
AutoCAD SHX Text
(KVA)
AutoCAD SHX Text
BRANCH CIRCUIT
AutoCAD SHX Text
DEVICE
AutoCAD SHX Text
NO.
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
POLES
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
GRND
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
SERVING
AutoCAD SHX Text
COND.
AutoCAD SHX Text
(IN)
AutoCAD SHX Text
GRND
AutoCAD SHX Text
WIRE
AutoCAD SHX Text
POLES
AutoCAD SHX Text
AMPS
AutoCAD SHX Text
TRIP
AutoCAD SHX Text
NO.
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
A
AutoCAD SHX Text
B
AutoCAD SHX Text
C
AutoCAD SHX Text
1
AutoCAD SHX Text
200
AutoCAD SHX Text
3
AutoCAD SHX Text
CHILLER #1
AutoCAD SHX Text
47.6
AutoCAD SHX Text
4.8
AutoCAD SHX Text
FTU1-1, 2, VAV1-1
AutoCAD SHX Text
1
AutoCAD SHX Text
25
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
47.6
AutoCAD SHX Text
5.9
AutoCAD SHX Text
FTU1-15
AutoCAD SHX Text
1
AutoCAD SHX Text
30
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
47.6
AutoCAD SHX Text
3.4
AutoCAD SHX Text
FTU1-3
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
200
AutoCAD SHX Text
3
AutoCAD SHX Text
CHILLER #2
AutoCAD SHX Text
47.6
AutoCAD SHX Text
3.4
AutoCAD SHX Text
FTU1-4
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
8
AutoCAD SHX Text
9
AutoCAD SHX Text
47.6
AutoCAD SHX Text
4.5
AutoCAD SHX Text
VAV1-3, 4, 5
AutoCAD SHX Text
1
AutoCAD SHX Text
25
AutoCAD SHX Text
10
AutoCAD SHX Text
11
AutoCAD SHX Text
47.6
AutoCAD SHX Text
3.3
AutoCAD SHX Text
FTU1-5
AutoCAD SHX Text
1
AutoCAD SHX Text
15
AutoCAD SHX Text
12
AutoCAD SHX Text
13
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
FTU1-8
AutoCAD SHX Text
4.4
AutoCAD SHX Text
5.4
AutoCAD SHX Text
FTU1-7, VAV1-8
AutoCAD SHX Text
1
AutoCAD SHX Text
25
AutoCAD SHX Text
14
AutoCAD SHX Text
15
AutoCAD SHX Text
15
AutoCAD SHX Text
1
AutoCAD SHX Text
VAV1-2, 12
AutoCAD SHX Text
2.5
AutoCAD SHX Text
4.5
AutoCAD SHX Text
FTU1-6
AutoCAD SHX Text
1
AutoCAD SHX Text
25
AutoCAD SHX Text
16
AutoCAD SHX Text
17
AutoCAD SHX Text
25
AutoCAD SHX Text
1
AutoCAD SHX Text
VAV1-9, 10
AutoCAD SHX Text
4.6
AutoCAD SHX Text
4.8
AutoCAD SHX Text
FTU1-12, 13
AutoCAD SHX Text
1
AutoCAD SHX Text
25
AutoCAD SHX Text
18
AutoCAD SHX Text
19
AutoCAD SHX Text
20
AutoCAD SHX Text
1
AutoCAD SHX Text
FTU1-14
AutoCAD SHX Text
3.9
AutoCAD SHX Text
6.4
AutoCAD SHX Text
FTU1-17
AutoCAD SHX Text
1
AutoCAD SHX Text
30
AutoCAD SHX Text
20
AutoCAD SHX Text
21
AutoCAD SHX Text
15
AutoCAD SHX Text
1
AutoCAD SHX Text
FTU1-11
AutoCAD SHX Text
2.9
AutoCAD SHX Text
5.5
AutoCAD SHX Text
VAV1-7, 9, 10, 11
AutoCAD SHX Text
1
AutoCAD SHX Text
25
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
15
AutoCAD SHX Text
1
AutoCAD SHX Text
WH-3
AutoCAD SHX Text
3.0
AutoCAD SHX Text
3.9
AutoCAD SHX Text
FTU1-16, VAV1-6
AutoCAD SHX Text
1
AutoCAD SHX Text
20
AutoCAD SHX Text
24
AutoCAD SHX Text
25
AutoCAD SHX Text
15
AutoCAD SHX Text
1
AutoCAD SHX Text
WH-2
AutoCAD SHX Text
3.0
AutoCAD SHX Text
33.1
AutoCAD SHX Text
PANEL 'HM2'
AutoCAD SHX Text
3
AutoCAD SHX Text
150
AutoCAD SHX Text
26
AutoCAD SHX Text
27
AutoCAD SHX Text
22.6
AutoCAD SHX Text
28
AutoCAD SHX Text
29
AutoCAD SHX Text
18.3
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
26.2
AutoCAD SHX Text
PANEL 'HM3'
AutoCAD SHX Text
3
AutoCAD SHX Text
150
AutoCAD SHX Text
32
AutoCAD SHX Text
33
AutoCAD SHX Text
26.6
AutoCAD SHX Text
34
AutoCAD SHX Text
35
AutoCAD SHX Text
22.0
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
SPD
AutoCAD SHX Text
3
AutoCAD SHX Text
40
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
40
AutoCAD SHX Text
41
AutoCAD SHX Text
SPACE
AutoCAD SHX Text
42
AutoCAD SHX Text
* NOTE: EXISTING CIRCUITS AND CIRCUIT BREAKERS TO
AutoCAD SHX Text
REMAIN ARE SHOWN AS FADED. NEW CIRCUITS AND CIRCUIT
AutoCAD SHX Text
BREAKERS ARE SHOWN AS BOLD.
AutoCAD SHX Text
107.5
AutoCAD SHX Text
106.7
AutoCAD SHX Text
108.1
AutoCAD SHX Text
79.2
AutoCAD SHX Text
69.6
AutoCAD SHX Text
55.7
AutoCAD SHX Text
TOTAL CONNECTED LOAD:
AutoCAD SHX Text
526.8
AutoCAD SHX Text
KVA
AutoCAD SHX Text
TOTAL DEMAND LOAD:
AutoCAD SHX Text
526.8
AutoCAD SHX Text
KVA
SCALE: NTS
POWER RISER DIAGRAM
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E5.1
PO
WE
R R
IS
ER
D
IA
GR
AM
JLS
GENERAL NOTES:
2/12/2018 9:29:53 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
SPD
AutoCAD SHX Text
OUTSIDE BUILDING
AutoCAD SHX Text
ELECT ROOM 228
AutoCAD SHX Text
EXISTING PANEL 'P1C' 250A 208Y/120V
AutoCAD SHX Text
EXISTING 'TX-T1A' 75 KVA 480:208Y/120V
AutoCAD SHX Text
MAIN ELECT ROOM 140
AutoCAD SHX Text
EXISTING PANEL 'HM2' 250A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING PANEL 'P2B' 250A 208Y/120V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING 'TX-T2B' 45 KVA 480-208Y/120V
AutoCAD SHX Text
ELECT ROOM 269
AutoCAD SHX Text
TO PRIMARY MANHOLE
AutoCAD SHX Text
GROUND
AutoCAD SHX Text
150A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
OUTSIDE BUILDING
AutoCAD SHX Text
2ND FLOOR
AutoCAD SHX Text
1ST FLOOR
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
EXISTING DPDT SWITCH 480Y/277V 600A, 3 , 4W
AutoCAD SHX Text
N
AutoCAD SHX Text
E
AutoCAD SHX Text
150A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
EXISTING PANEL 'H3A' 250A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING PANEL 'P3A' 250A 208Y/120V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING 'TX-T3A' 45 KVA 480-208Y/120V
AutoCAD SHX Text
150A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
200A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
EXISTING PANEL 'H2A' 250A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
150A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
M
AutoCAD SHX Text
EXISTING PANEL 'MDP' 1,200A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING PANEL 'H1A' 600A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
FROM 300KW GENERATOR
AutoCAD SHX Text
EXISTING PANEL 'P1B' 250A 208Y/120V
AutoCAD SHX Text
EXISTING PANEL 'P1A' 250A 208Y/120V
AutoCAD SHX Text
250A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
EXISTING PANEL 'HM1' 600A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING PANEL 'P2C' 150A 208Y/120V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
EXISTING PANEL 'P2A' 250A 208Y/120V
AutoCAD SHX Text
EXISTING 'TX-T2A' 30 KVA 480-208Y/120V
AutoCAD SHX Text
100A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
100A
AutoCAD SHX Text
EXISTING ENC. CB
AutoCAD SHX Text
PANEL EXISTING 'HM3' 250A 480Y/277V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
150A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
ELECT ROOM 322
AutoCAD SHX Text
1,200A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
600A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
600A
AutoCAD SHX Text
MAIN
AutoCAD SHX Text
MISC. SPACE
AutoCAD SHX Text
MISC. SPACE
AutoCAD SHX Text
MISC. SPACE
AutoCAD SHX Text
GENERATOR YARD
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[85]
AutoCAD SHX Text
[55]
AutoCAD SHX Text
[620]
AutoCAD SHX Text
[620]
AutoCAD SHX Text
[255]
AutoCAD SHX Text
[255]
AutoCAD SHX Text
[255]
AutoCAD SHX Text
[130]
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[85]
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[85]
AutoCAD SHX Text
[1,200]
AutoCAD SHX Text
[620]
AutoCAD SHX Text
[620]
AutoCAD SHX Text
1.THIS RISER DIAGRAM IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS RISER DIAGRAM IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. FIELD VERIFY CONFIGURATION AND CIRCUIT SIZE. 2. PROVIDE NEW CIRCUIT BREAKERS IN EXISTING PANELS AS INDICATED IN PANEL SCHEDULES ON SHEET E4.2.
AutoCAD SHX Text
NEW PANEL 'P2D' 100A 208Y/120V
AutoCAD SHX Text
SPD
AutoCAD SHX Text
NEW PANEL 'P3B' 100A 208Y/120V
AutoCAD SHX Text
ELECT ROOM 324A
AutoCAD SHX Text
SPD
AutoCAD SHX Text
[150]
AutoCAD SHX Text
[100]
AutoCAD SHX Text
[100]
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E6.1
ELE
CT
RIC
AL D
ET
AILS
JLS
E6.1
2
SCALE: NTS
LARGE ROOM LIGHTING CONTROL DETAIL
E6.1
3
SCALE: NTS
SMALL ROOM LIGHTING CONTROL DETAIL
E6.1
1
SCALE: NTS
COMMON AREA AND CORRIDOR LIGHTING CONTROL DETAIL
2/12/2018 11:40:52 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
LMRC-101
AutoCAD SHX Text
FIXTURE
AutoCAD SHX Text
BALLASTS
AutoCAD SHX Text
LV SWITCH
AutoCAD SHX Text
LINE
AutoCAD SHX Text
VOLTAGE
AutoCAD SHX Text
CEILING MOUNTED SENSOR
AutoCAD SHX Text
CAT5E
AutoCAD SHX Text
CAT5E
AutoCAD SHX Text
NOTES: 1.BASIS OF DESIGN FOR ROOM CONTROLS IS WATTSTOPPER LMRC-101 ROOM BASIS OF DESIGN FOR ROOM CONTROLS IS WATTSTOPPER LMRC-101 ROOM CONTROLLER FOR LIGHTING. LIGHTING SHALL BE MANUAL ON. CONFIRM REQUIREMENTS WITH MANUFACTURER. 2.SWITCH SHALL BE CAPABLE OF TURNING OFF THE CONTROLLED LIGHTING SWITCH SHALL BE CAPABLE OF TURNING OFF THE CONTROLLED LIGHTING ZONE MANUALLY. 3.REDUCE OR ADD SWITCHES AND CEILING SENSORS TO MATCH QUANTITY REDUCE OR ADD SWITCHES AND CEILING SENSORS TO MATCH QUANTITY SHOWN IN DRAWING. 4.IF ROOM REQUIRES DIMMING, USE A LOW VOLTAGE WALL DIMMER AND IF ROOM REQUIRES DIMMING, USE A LOW VOLTAGE WALL DIMMER AND LMRC-211 FOR SINGLE ZONE CONTROL OR LMRC-212 FOR TWO ZONE CONTROL.
AutoCAD SHX Text
NEUTRAL
AutoCAD SHX Text
HOT
AutoCAD SHX Text
WHT
AutoCAD SHX Text
BLK
AutoCAD SHX Text
RED
AutoCAD SHX Text
RED
AutoCAD SHX Text
BZ-250
AutoCAD SHX Text
MANUAL ON
AutoCAD SHX Text
FIXTURE
AutoCAD SHX Text
BALLASTS
AutoCAD SHX Text
RED
AutoCAD SHX Text
BLK
AutoCAD SHX Text
BLU
AutoCAD SHX Text
CONTROL OUTPUT
AutoCAD SHX Text
COMMON
AutoCAD SHX Text
+24V
AutoCAD SHX Text
ANY
AutoCAD SHX Text
24VDC
AutoCAD SHX Text
SENSOR
AutoCAD SHX Text
LV SWITCH
AutoCAD SHX Text
GRY
AutoCAD SHX Text
NOTES: 1.BASIS OF DESIGN FOR ROOM CONTROLS IS WATTSTOPPER BZ-250 POWER BASIS OF DESIGN FOR ROOM CONTROLS IS WATTSTOPPER BZ-250 POWER PACKS FOR LIGHTING. CONFIRM REQUIREMENTS WITH MANUFACTURER. 2.SWITCH SHALL BE CAPABLE OF TURNING OFF THE CONTROLLED LIGHTING SWITCH SHALL BE CAPABLE OF TURNING OFF THE CONTROLLED LIGHTING ZONE MANUALLY. 3.PROVIDE MANUAL LINE SWITCHES IF REQUIRED. PROVIDE MANUAL LINE SWITCHES IF REQUIRED. 4.REDUCE OR ADD SWITCHES AND CEILING SENSORS TO MATCH QUANTITY REDUCE OR ADD SWITCHES AND CEILING SENSORS TO MATCH QUANTITY SHOWN IN DRAWING.
AutoCAD SHX Text
MANUAL ON
AutoCAD SHX Text
LMCP ELEC ROOM
AutoCAD SHX Text
FIXTURES OPEN AREAS (TYP)
AutoCAD SHX Text
FIXTURES CORRIDORS (TYP)
AutoCAD SHX Text
POWER CIRCUIT
AutoCAD SHX Text
INCOMING LIGHTING CIRCUITS FROM PANELS
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
CAT5E
AutoCAD SHX Text
LOW VOLTAGE SWITCHES OPEN AREAS
AutoCAD SHX Text
LOW VOLTAGE SWITCHES CORR (TYP)
AutoCAD SHX Text
NOTES: 1.BASIS OF DESIGN FOR LARGE OPEN AREAS, CORRIDORS, AND EXTERIOR LIGHTING BASIS OF DESIGN FOR LARGE OPEN AREAS, CORRIDORS, AND EXTERIOR LIGHTING CONTROL IS WATTSTOPPER LMCP RELAY PANEL. CONFIRM REQUIREMENTS SUCH AS DEVICE COUNT AND CABLE LENGTH RESTRICTIONS WITH MANUFACTURER. 2.OPEN OFFICE AREAS SHALL BE PROGRAMMED TO TURN ON THE FIXTURES AT A TIME OPEN OFFICE AREAS SHALL BE PROGRAMMED TO TURN ON THE FIXTURES AT A TIME DETERMINED BY THE OWNER. PANEL SHALL BE PROGRAMMED TO TURN OFF ALL LIGHTS AT A TIME DETERMINED BY THE OWNER AND FLASH 1 TIME 15 MINUTES BEFORE SHUTOFF. MOMENTARY CONTACT SWITCH WILL BE PROVIDED TO OVERRIDE THE OFF SETTING FOR NO MORE THAN 120 MINUTES AFTER HOURS. SWITCH SHALL ALSO BE CAPABLE OF TURNING OFF FIXTURES MANUALLY. 3.LIGHTING IN ALL CORRIDORS SHALL BE PROGRAMMED TO BE TURNED ON AND OFF LIGHTING IN ALL CORRIDORS SHALL BE PROGRAMMED TO BE TURNED ON AND OFF AT A TIME DETERMINED BY THE OWNER AND FLASH 1 TIME 15 MINUTES BEFORE SHUTOFF. MOMENTARY CONTACT SWITCH WILL BE PROVIDED TO OVERRIDE THE OFF SETTING FOR NO MORE THAN 30 MINUTES AFTER HOURS. 4.EXTERIOR LIGHTING SHALL BE AUTOMATICALLY CONTROLLED BY PHOTOCELL. EXTERIOR LIGHTING SHALL BE AUTOMATICALLY CONTROLLED BY PHOTOCELL. COORDINATE WITH THE OWNER TO DETERMINE PHOTOCELL SENSITIVITY FOR TURNING ON FIXTURES. 5.PROVIDE KEYED SWITCH WITH LMIO OVERRIDE IN WHERE REQUIRED TO ALLOW FOR PROVIDE KEYED SWITCH WITH LMIO OVERRIDE IN WHERE REQUIRED TO ALLOW FOR MANUAL CONTROL AND PROGRAMMABLE SHUTOFF OF LIGHTING IN AREA AFTER HOURS. 6.ALL LOW VOLTAGE SWITCHES THAT ARE INTENDED TO OVERRIDE AUTOMATIC TIME ALL LOW VOLTAGE SWITCHES THAT ARE INTENDED TO OVERRIDE AUTOMATIC TIME CONTROL DEVICES SHALL BE LABELED TO DEFINE THE AREA BEING CONTROLLED. 7.SEE LIGHTING DRAWINGS FOR CIRCUITS UTILIZING LIGHTING CONTROL RELAYS. SEE LIGHTING DRAWINGS FOR CIRCUITS UTILIZING LIGHTING CONTROL RELAYS. 8.EXTERIOR FIXTURES SHALL BE CONTROLLED VIA PHOTOCELL MOUNTED TO ROOF. EXTERIOR FIXTURES SHALL BE CONTROLLED VIA PHOTOCELL MOUNTED TO ROOF. PENETRATE ROOF IN A FASHION THAT DOES NOT VOID ROOF WARRANTY. 9.PROGRAMMING SHALL BE CAPABLE OF BEING MAINTAINED BY BATTERY BACKUP FOR PROGRAMMING SHALL BE CAPABLE OF BEING MAINTAINED BY BATTERY BACKUP FOR AT LEAST 10 HOURS DURING AN OUTAGE.
AutoCAD SHX Text
PC
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
LV
AutoCAD SHX Text
S
AutoCAD SHX Text
EXTERIOR FIXTURES (TYP)
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E6.2
ELE
CT
RIC
AL D
ET
AILS
JLS
E6.2
4
SCALE: NTS
MAIN TELECOMMUNICATIONS RACK
E6.2
6
SCALE: NTS
TYPICAL DATA/VOICE OUTLET DETAIL
E6.2
5
SCALE: NTS
TELECOM. GROUNDING BAR DETAIL
SPECIFIC NOTES:
E6.2
7
SCALE: NTS
PARTIAL TELECOM RISER DIAGRAM
2/12/2018 11:40:57 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
100V
AutoCAD SHX Text
100V
AutoCAD SHX Text
100D
AutoCAD SHX Text
100D
AutoCAD SHX Text
ROOM# - OUTLET#
AutoCAD SHX Text
PLASTIC (IVORY) FACEPLATE
AutoCAD SHX Text
ICON WITH PRINTABLE I.D. STRIP AND REMOVABLE CLEAR PLASTIC COVER LABEL TO IDENTIFY EACH JACK INDIVIDUALLY. CONFIRM NUMBERING STANDARD WITH COUNTY.
AutoCAD SHX Text
ENGRAVED I.D. MARKER (REMOVABLE /CHANGEABLE)
AutoCAD SHX Text
ICON WITH PRINTABLE I.D. STRIP AND REMOVABLE CLEAR PLASTIC COVER LABEL TO IDENTIFY EACH JACK INDIVIDUALLY
AutoCAD SHX Text
COLOR CODED BEZEL ON RJ-45 JACK (CATEGORY 6)
AutoCAD SHX Text
ENGRAVED I.D. MARKER (REMOVABLE /CHANGEABLE)
AutoCAD SHX Text
BLANK FOR FUTURE USE
AutoCAD SHX Text
PROVIDE DOUBLE GAUGE 4' X 4" X 2 1/8" DEEP STAMPED STEEL DEVICE BOX WITH MUD RING RECESSED IN WALL. PROVIDE PLASTIC FACEPLATE.
AutoCAD SHX Text
(PROVIDED BY OTHERS)
AutoCAD SHX Text
(PROVIDED BY OTHERS)
AutoCAD SHX Text
WM
AutoCAD SHX Text
WM
AutoCAD SHX Text
WM
AutoCAD SHX Text
WM
AutoCAD SHX Text
WM
AutoCAD SHX Text
WM
AutoCAD SHX Text
WM
AutoCAD SHX Text
SIDE PANEL. VERTICAL WIRE MANAGEMENT, 4"x5" (TYP BOTH SIDES).
AutoCAD SHX Text
CATEGORY 6 CABLES (TYP.)
AutoCAD SHX Text
FROM DATA OUTLETS
AutoCAD SHX Text
48 PORT DATA PATCH PANEL WITH CAT 6 RJ-45 CONNECTORS (TYP.). PROVIDE 20% SPARE CAPACITY.
AutoCAD SHX Text
COMMUNICATIONS RACK FOR DATA.
AutoCAD SHX Text
3000 VA UPS (BY OTHERS)
AutoCAD SHX Text
WIRE MANAGEMENT (TYP)
AutoCAD SHX Text
DATA BACKBONE
AutoCAD SHX Text
HUBS, SWITCHES, AND FIBER OPTIC MODEMS BY OTHERS.
AutoCAD SHX Text
HUB OR SWITCH
AutoCAD SHX Text
HUB OR SWITCH
AutoCAD SHX Text
ICON WITH PRINTABLE I.D. STRIP AND REMOVABLE CLEAR PLASTIC COVER LABEL TO IDENTIFY EACH JACK INDIVIDUALLY.
AutoCAD SHX Text
TO EQUIPMENT (TYP.)
AutoCAD SHX Text
EXOTHERMICALLY WELDED CONNECTION
AutoCAD SHX Text
TO MAIN GROUND BAR
AutoCAD SHX Text
18" x 4" x 1/4" COPPER INSULATED GROUND BAR
AutoCAD SHX Text
#$3/0 AWG
AutoCAD SHX Text
NOTE: BOND CONDUCTORS FOR TELECOMMUNICATIONS AT THE TGB AND TMGB USING EXOTHERMICALLY WELDED, LISTED COMPRESSION TWO-HOLE LUGS, SUITABLE AND EQUIVALENT ON HOLE NON TWISTING LUGS, OR OTHER IRREVERSIBLE COMPRESSION TYPE CONNECTIONS IN ACCORDANCE WITH J-STD-607-A PARAGRAPH 5.2.7.1.
AutoCAD SHX Text
GRADE
AutoCAD SHX Text
#3/0 AWG TO SYSTEM GROUND
AutoCAD SHX Text
COMM ROOM 161
AutoCAD SHX Text
DROP CEILING
AutoCAD SHX Text
TYPICAL ADMIN SPACE
AutoCAD SHX Text
4
AutoCAD SHX Text
6
AutoCAD SHX Text
3
AutoCAD SHX Text
EXISTING TELECOM SERVICE CABLING TO REMAIN. PROVIDE 4'X8'X3/4" A-C GRADE PLYWOOD BACKBOARD PAINTED WITH FIRE RESISTANT PAINT TO MATCH WALL. BACKBOARD SHALL BE USED FOR NEW TELECOMMUNICATIONS EQUIPMENT. PROVIDE 19" RACK PER DETAIL 4, THIS SHEET. PROVIDE 48 PORT RJ-45 CAT 6 PATCH PANELS AS NECESSARY TO TERMINATE ALL COPPER PAIRS AND HORIZONTAL CABLING (PROVIDE 20% SPARE CAPACITY). PROVIDE HORIZONTAL CAT 6 CABLING TO WORKSTATION OUTLETS. PROVIDE A MINIMUM OF TWO CAT6 CABLES AND JACKS PER DROP. ROUTE IN EXISTING CABLE TRAY. PROVIDE 3/4" CONDUIT IN WALL FOR VOICE AND DATA CABLING. STUB UP 6" ABOVE CEILING AND PROVIDE INSULATED BUSHING. PROVIDE COPPER TELECOMMUNICATIONS GROUNDING BAR AS INDICATED IN DETAIL 5, THIS SHEET. PROVIDE #6 AWG COPPER GROUND WIRE FROM THE GROUND TERMINAL TO THE GROUNDING BAR (TYP.). EXISTING RACK(S) TO REMAIN.
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
5
AutoCAD SHX Text
E6.2
AutoCAD SHX Text
3
AutoCAD SHX Text
5
AutoCAD SHX Text
8
AutoCAD SHX Text
1
AutoCAD SHX Text
E6.2
AutoCAD SHX Text
4
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
6
AutoCAD SHX Text
7
AutoCAD SHX Text
2
AutoCAD SHX Text
7
AutoCAD SHX Text
EXISTING CABLE TRAY
AutoCAD SHX Text
8
AutoCAD SHX Text
2ND FLOOR
AutoCAD SHX Text
2ND FLOOR
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E6.3
ELE
CT
RIC
AL D
ET
AILS
JLS
E6.3
8
SCALE: NTS
SINGLE DOOR - WALL MOUNTED CARD READER - STD. MORTISE LOCK
E6.3
9
SCALE: NTS
SINGLE DOOR - WALL MOUNTED CR - EXIT DEVICE
2/12/2018 11:40:58 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
PLAN
AutoCAD SHX Text
OPERATIONAL NARRATIVE
AutoCAD SHX Text
INGRESS
AutoCAD SHX Text
EGRESS
AutoCAD SHX Text
POWER
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
COMPONENTS
AutoCAD SHX Text
SECURITY RISER - DOOR DETAIL
AutoCAD SHX Text
FIRE ALARM
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
TO IDF
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
J-HOOK
AutoCAD SHX Text
CARD READER
AutoCAD SHX Text
POWER / COMM.
AutoCAD SHX Text
REX, DPS, LOCK
AutoCAD SHX Text
POWER /COMM.
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
J-HOOK
AutoCAD SHX Text
ELECTRIC
AutoCAD SHX Text
HINGE
AutoCAD SHX Text
-
AutoCAD SHX Text
WALL MOUNTED CARD READER
AutoCAD SHX Text
-
AutoCAD SHX Text
DOOR POSITION SWITCH
AutoCAD SHX Text
-
AutoCAD SHX Text
EXIT DEVICE (W/ ELECTRIC TRIM
AutoCAD SHX Text
-
AutoCAD SHX Text
ELECTRIC HINGE
AutoCAD SHX Text
CR
AutoCAD SHX Text
CARD READER
AutoCAD SHX Text
ED2
AutoCAD SHX Text
ED2
AutoCAD SHX Text
DOOR POSITION
AutoCAD SHX Text
SWITCH
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
PLAN
AutoCAD SHX Text
OPERATIONAL NARRATIVE
AutoCAD SHX Text
INGRESS
AutoCAD SHX Text
EGRESS
AutoCAD SHX Text
POWER
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
COMPONENTS
AutoCAD SHX Text
SECURITY RISER - DOOR DETAIL
AutoCAD SHX Text
FIRE ALARM
AutoCAD SHX Text
TYPE A
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
SECURE
AutoCAD SHX Text
TYPE B
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
ELECTRIC
AutoCAD SHX Text
HINGE
AutoCAD SHX Text
-
AutoCAD SHX Text
WALL MOUNTED CARD READER
AutoCAD SHX Text
-
AutoCAD SHX Text
DOOR POSITION SWITCH
AutoCAD SHX Text
CR
AutoCAD SHX Text
CR
AutoCAD SHX Text
TO IDF
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
REX, DPS, EXIT DEVICE
AutoCAD SHX Text
CARD READER
AutoCAD SHX Text
POWER / COMM.
AutoCAD SHX Text
WALL MOUNTED
AutoCAD SHX Text
CARD READER
AutoCAD SHX Text
L2
AutoCAD SHX Text
L2
AutoCAD SHX Text
L2
AutoCAD SHX Text
DOOR POSITION
AutoCAD SHX Text
SWITCH
AutoCAD SHX Text
-
AutoCAD SHX Text
ELECTRIC HINGE
AutoCAD SHX Text
J-HOOK
AutoCAD SHX Text
PRESENTING VALID CREDENTIALS TO CARD READER SHUNTS DPS, AND UNLOCKS ELECTRIC LOCK ALLOWING INGRESS. OUTSIDE TRIM OPERABLE BY KEY. KEY OVERRIDE IS FOR EMERGENCY INGRESS ONLY. UNDER NON-EMERGENCY CONDITIONS, KEY OVERRIDE WILL ACTIVE ALARM CONDITION IN ACCESS CONTROL MANAGEMENT SOFTWARE INTERFACE.
AutoCAD SHX Text
FREE MECHANICAL EGRESS AT ALL TIMES. REQUEST TO EXIT INTEGRATED IN ELECTRONIC LOCK SHUNTS DPS ON EGRESS.
AutoCAD SHX Text
FREE MECHANICAL EGRESS ALWAYS AVAILABLE. DOOR DOES NOT CHANGE FUNCTION UNDER FIRE ALARM CONDITIONS. TRIM / LOCKSET FAILS SECURE ON LOSS OF POWER. NO FIRE ALARM INTERFACE REQUIRED.
AutoCAD SHX Text
POWER PROVIDED BY CENTRALLY LOCATED POWER SUPPLY.
AutoCAD SHX Text
1. ACCESS CONTROL / SECURITY COMMUNICATIONS CABLE TO BE WIRED TO NEAREST ACCESS CONTROL PANEL VIA MULTI-CONDUCTOR, COMPOSITE STP CABLE TO IDF / MDF / COMM. ROOM, SEE PANEL SCHEDULE FOR ADDITIONAL INFORMATION.
AutoCAD SHX Text
1. ACCESS CONTROL / SECURITY COMMUNICATIONS CABLE TO BE WIRED TO NEAREST ACCESS CONTROL PANEL VIA MULTI-CONDUCTOR, COMPOSITE STP CABLE TO IDF / MDF / COMM. ROOM, SEE PANEL SCHEDULE FOR ADDITIONAL INFORMATION.
AutoCAD SHX Text
FREE MECHANICAL EGRESS ALWAYS AVAILABLE. DOOR DOES NOT CHANGE FUNCTION UNDER FIRE ALARM CONDITIONS. TRIM / LOCKSET FAILS SECURE ON LOSS OF POWER. NO FIRE ALARM INTERFACE REQUIRED.
AutoCAD SHX Text
PRESENTING VALID CREDENTIALS TO CARD READER SHUNTS DPS, AND UNLOCKS ELECTRIC LOCK ALLOWING INGRESS. OUTSIDE TRIM OPERABLE BY KEY. KEY OVERRIDE IS FOR EMERGENCY INGRESS ONLY. UNDER NON-FIRE ALARM CONDITIONS, KEY OVERRIDE WILL ACTIVATE ALARM CONDITION IN ACCESS CONTROL MANAGEMENT SOFTWARE INTERFACE.
AutoCAD SHX Text
FREE MECHANICAL EGRESS AT ALL TIMES. REQUEST TO EXIT INTEGRATED IN ELECTRONIC PUSH BAR SHUNTS DPS ON EGRESS.
AutoCAD SHX Text
12VDC POWER FOR CARD READER AND ACCESS CONTROL PANEL PROVIDED BY CENTRALLY MOUNTED POWER SUPPLY, LOCATED IN IDF / MDF / COMM. ROOM, SEE PANEL SCHEDULE FOR ADDITIONAL INFORMATION. 24VDC POWER FOR EXIT DEVICES PROVIDED BY LOCALLY MOUNTED POWER SUPPLY, LOCATED ACCESSIBLE SPACE ON SECURE SIDE OF OPENING. SEE SECURITY DRAWINGS FLOOR PLANS FOR ADDITIONAL INFORMATION.
AutoCAD SHX Text
COMM.
AutoCAD SHX Text
AND REX)
AutoCAD SHX Text
PROVIDE JUNCTION BOX FOR DOORS WITH ELECTRIC STRIKE
AutoCAD SHX Text
PROVIDE JUNCTION BOX FOR DOORS WITH ELECTRIC STRIKE
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E6.4
ELE
CT
RIC
AL D
ET
AILS
JLS
E6.4
11
SCALE: NTS
EXTERIOR CORNER CAMERA MOUNT - TYPICAL
E6.4
12
SCALE: NTS
EXTERIOR CAMERA MOUNTING DETAIL
E6.4
10
SCALE: NTS
TYPICAL DEVICE MOUNTING DETAIL
NOTES:
2/12/2018 11:41:03 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
EXTERIOR PoE CAMERA
AutoCAD SHX Text
EXTERIOR WALL MOUNT KIT
AutoCAD SHX Text
(WITH INTEGRATED BACKBOX)
AutoCAD SHX Text
CORNER MOUNT BRACKET
AutoCAD SHX Text
FLEX CONDUIT
AutoCAD SHX Text
BACKBOX
AutoCAD SHX Text
EMT CONDUIT
AutoCAD SHX Text
CAT6 DATA CABLE ROUTED
AutoCAD SHX Text
BACK TO TELECOM CLOSET
AutoCAD SHX Text
VIA CONDUIT/CABLE TRAY
AutoCAD SHX Text
JT
AutoCAD SHX Text
2-PORT SURFACE MOUNT BOX
AutoCAD SHX Text
("BISCUIT JACK") WITH (1ea) CAT
AutoCAD SHX Text
6 RJ45 MODULAR JACK
AutoCAD SHX Text
CAMERA PATCH CABLE
AutoCAD SHX Text
DETAIL NOTES
AutoCAD SHX Text
1.
AutoCAD SHX Text
PROVIDE CAMERA WITH EXTENDED DATA/PATCH CABLE TO ROUTE TO INTERIOR BACKBOX / BISCUIT JACK.
AutoCAD SHX Text
2.
AutoCAD SHX Text
CONDUIT, BACKBOX, ENCLOSURE OR CABLE VISIBLE FROM THE EXTERIOR OF THE BUILDING IS NOT ALLOWED.
AutoCAD SHX Text
IF THIS REQUIREMENT IS NOT ADHERED DURING INSTALLATION, REPAIR AND/OR DAMAGE REMEDIATION TO
AutoCAD SHX Text
EXTERIOR STRUCTURE WILL BE THE RESPONSIBILITY OF THE CONTRACTOR.
AutoCAD SHX Text
3.
AutoCAD SHX Text
SEE SPECIFICATIONS FOR CAMERA TYPE, HOUSING AND ADDITIONAL REQUIREMENTS.
AutoCAD SHX Text
SM
AutoCAD SHX Text
1
AutoCAD SHX Text
15'-0"
AutoCAD SHX Text
E6.4
AutoCAD SHX Text
12
AutoCAD SHX Text
6" ABOVE COUNTER
AutoCAD SHX Text
18"
AutoCAD SHX Text
47"
AutoCAD SHX Text
80" MIN.
AutoCAD SHX Text
5' MAX
AutoCAD SHX Text
47"
AutoCAD SHX Text
1. WITH THE EXCEPTION OF DEVICES ABOVE COUNTERS, MOUNT RECEPTACLES, DATA, PHONE, AND T.V. OUTLETS 18" A.F.F. (TO CENTER OF OUTLET) UNLESS NOTED OTHERWISE. MOUNT SWITCHES AT NO MORE THAN 47" A.F.F. (TO TOP OF SWITCH HANDLE) UNLESS NOTED OTHERWISE. IF THERE ARE OBSTRUCTIONS (I.E. A SERVICE COUNTER), MOUNT SWITCHES AT NO MORE THAN 44" A.F.F. (TO TOP OF SWITCH HANDLE). SEE SECTION 308 OF THE ADA STANDARDS FOR ACCESSIBLE DESIGN FOR MORE INFORMATION. CONFORM TO ALL AMERICANS WITH DISABILITY ACT (ADA) REQUIREMENTS.
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
WALL CABINETS
AutoCAD SHX Text
BASE CABINETS
AutoCAD SHX Text
F.A. WALL APPLIANCE
AutoCAD SHX Text
PULL STATION
AutoCAD SHX Text
SW
AutoCAD SHX Text
COMM
AutoCAD SHX Text
RECP
AutoCAD SHX Text
RECP
AutoCAD SHX Text
COMM
AutoCAD SHX Text
COMM
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&
RRS
&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.com
Arch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
E6.5
ELE
CT
RIC
AL D
ET
AILS
JLS
E6.5
15
SCALE: NTS
SECURITY CAMERA RISER - ACT
E6.5
14
SCALE: NTS
SECURITY CAMERA DETAIL - CEILING MOUNT
E6.5
13
SCALE: NTS
SECURITY CAMERA RISER - WALL/BEAM MOUNT
2/12/2018 11:41:08 AM, Simes & Rosch, LLC
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
CEILING TEE'S
AutoCAD SHX Text
CEILING TILE
AutoCAD SHX Text
CAT 6 ETHERNET
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
COMPONENTS
AutoCAD SHX Text
-
AutoCAD SHX Text
PoE CAMERA
AutoCAD SHX Text
-
AutoCAD SHX Text
ACOUSTICAL TILE CEILING
AutoCAD SHX Text
SECURITY CAMERA DETAIL
AutoCAD SHX Text
COMMUNICATIONS
AutoCAD SHX Text
POWER
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
MODE OF OPERATION
AutoCAD SHX Text
OPERATIONAL NARRATIVE
AutoCAD SHX Text
J HOOK
AutoCAD SHX Text
CAMERA TETHER
AutoCAD SHX Text
TO CABLE TRAY
AutoCAD SHX Text
OR IDF ROOM
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
TO CABLE TRAY
AutoCAD SHX Text
OR IDF ROOM
AutoCAD SHX Text
PROVIDE 1" CONDUIT.
AutoCAD SHX Text
LENGTH AS REQUIRED
AutoCAD SHX Text
4x4 JUNCTION
AutoCAD SHX Text
BOX
AutoCAD SHX Text
-
AutoCAD SHX Text
FIXED MULTI-SENSOR CAMERA
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
COMPONENTS
AutoCAD SHX Text
COMMUNICATIONS
AutoCAD SHX Text
POWER
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
MODE OF OPERATION
AutoCAD SHX Text
OPERATIONAL NARRATIVE
AutoCAD SHX Text
FIXED CAMERA - CEILING MOUNT
AutoCAD SHX Text
AXIS T91B51
AutoCAD SHX Text
CEILING TEE'S
AutoCAD SHX Text
CEILING TILE
AutoCAD SHX Text
CAT 6 ETHERNET
AutoCAD SHX Text
6x6 JUNCTION
AutoCAD SHX Text
BOX
AutoCAD SHX Text
PENDANT MOUNTED CAMERA. SEE SURVEILLANCE DRAWINGS FOR DESIRED ANGLE OF VIEW.
AutoCAD SHX Text
POWER PROVIDED OVER ETHERNET CABLE (POE). NO ADDITIONAL POWER REQUIRED AT CAMERA LOCATION.
AutoCAD SHX Text
PROVIDE PATCH CABLE CONNECTION TO LOCAL ETHERNET DROP (MDF).
AutoCAD SHX Text
INTERIOR FIXED CAMERA TO BE FLUSH MOUNTED TO CEILING TILE. SEE SURVEILLANCE DRAWING FOR DESIRED ANGLE OF VIEW.
AutoCAD SHX Text
PROVIDE PATCH CABLE CONNECTION TO LOCAL ETHERNET DROP (IDF).
AutoCAD SHX Text
1. POE CAMERA. NO POWER REQUIRED AT CAMERA LOCATION. 2. SEE SHOP DRAWINGS FOR FURTHER CABLING REQUIREMENTS IN IDF ROOM WHERE REQUIRED. 3. STRUCTURED CABLING CONTRACTOR TO COORDINATE WIRE RUN FROM DATA DROP TO COMMUNICATIONS CLOSET. 4. PROVIDE CONDUIT TO CAMERA MOUNT LENGTH TO ALLOW FOR UNOBSTRUCTED VIEW OF DESIRED ANGLE. 5. COORDINATE HEIGHT WITH ARCHITECT AND MINIMUM ALLOWABLE HEIGHT WITHIN STRUCTURE.
AutoCAD SHX Text
1. POE CAMERA. NO POWER REQUIRED AT CAMERA LOCATION. 2. MATCH FLUSH MOUNTED RING TO CEILING TILE WHERE POSSIBLE. ARCHITECTURAL APPROVAL REQUIRED. 3. SEE SHOP DRAWINGS FOR FURTHER CABLING REQUIREMENTS IN IDF ROOM WHERE REQUIRED. 4. PATCH CABLE FROM WALL/CEILING MOUNTED TECHNOLOGY DATA OUTLET PROVIDED BY SECURITY CONTRACTOR. 5. STRUCTURED CABLING CONTRACTOR TO COORDINATE WIRE RUN FROM DATA OUTLET TO COMMUNICATIONS CLOSET.
AutoCAD SHX Text
POWER PROVIDED OVER ETHERNET CABLE (POE). NO ADDITIONAL POWER REQUIRED AT CAMERA LOCATION.
AutoCAD SHX Text
JUNCTION BOX 5X5X2.78 (BY E.C.)
AutoCAD SHX Text
3/4 EMT (BY E.C.)
AutoCAD SHX Text
MOUNTING PLATE (BY S.I.C.)
AutoCAD SHX Text
WALL MOUNT CAMERA (BY SIC.)
AutoCAD SHX Text
CAT 6 PATCH CABLE (BY S.I.C)
AutoCAD SHX Text
ELEVATION
AutoCAD SHX Text
SUPPORT
AutoCAD SHX Text
BEAM
AutoCAD SHX Text
TO IDF ROOM OR
AutoCAD SHX Text
CABLE TRAY
AutoCAD SHX Text
SCALE: N.T.S.
AutoCAD SHX Text
COMPONENTS
AutoCAD SHX Text
COMMUNICATIONS
AutoCAD SHX Text
POWER
AutoCAD SHX Text
GENERAL NOTES
AutoCAD SHX Text
MODE OF OPERATION
AutoCAD SHX Text
OPERATIONAL NARRATIVE
AutoCAD SHX Text
SECURITY CAMERA DETAIL
AutoCAD SHX Text
-
AutoCAD SHX Text
FIXED IP CAMERA
AutoCAD SHX Text
-
AutoCAD SHX Text
SURFACE MOUNT (INTERIOR)
AutoCAD SHX Text
CAT6 CABLE (BY S.C.)
AutoCAD SHX Text
CAT6
AutoCAD SHX Text
SURFACE
AutoCAD SHX Text
MOUNT JACK
AutoCAD SHX Text
(BY S.C.)
AutoCAD SHX Text
IP CAMERA (BY S.I.C.)
AutoCAD SHX Text
J BOLT
AutoCAD SHX Text
J BOLT
AutoCAD SHX Text
EXTERIOR FIXED CAMERA TO BE SURFACE MOUNTED TO BUILDING SUPPORT BEAM. SEE SURVEILLANCE DRAWINGS FOR DESIRED ANGLE OF VIEW.
AutoCAD SHX Text
POWER PROVIDED OVER ETHERNET CABLE (POE). NO ADDITIONAL POWER REQUIRED AT CAMERA LOCATION.
AutoCAD SHX Text
PROVIDE PATCH CABLE CONNECTION TO LOCAL ETHERNET DROP (MDF).
AutoCAD SHX Text
1. POE CAMERA. NO POWER REQUIRED AT CAMERA LOCATION. 2. SEE SHOP DRAWINGS FOR FURTHER CABLING REQUIREMENTS IN IDF ROOM WHERE REQUIRED. 3. PATCH CABLE FROM INTERIOR TECHNOLOGY DROP PROVIDED BY SECURITY CONTRACTOR. 4. STRUCTURED CABLING CONTRACTOR TO COORDINATE WIRE RUN FROM DATA DROP TO COMMUNICATIONS CLOSET.
AutoCAD SHX Text
1. POE CAMERA. NO POWER REQUIRED AT CAMERA LOCATION. 2. SEE SHOP DRAWINGS FOR FURTHER CABLING REQUIREMENTS IN IDF ROOM WHERE REQUIRED. 3. PATCH CABLE FROM INTERIOR TECHNOLOGY DROP PROVIDED BY SECURITY CONTRACTOR. 4. STRUCTURED CABLING CONTRACTOR TO COORDINATE WIRE RUN FROM DATA DROP TO COMMUNICATIONS CLOSET.
A
B
C
D
1 2 3 4 5 6 7 8
SCALE: 1/8" = 1'-0"
0 8' 16'
Engin
eerin
g
Sime
s & R
osch
, LLC
CO
NSU
LTIN
G E
NG
INE
ER
S30
20 H
artle
y R
oad,
Sui
te 1
00Ja
ckso
nvill
e, F
L 32
257
Ph: (
904)
260
-303
1 F
ax: (
904)
260
-927
3FL
. Cer
t. of
Aut
h. 8
107
S&RR
S&
DRAWN BY:
Eber
t Nor
man
Bra
dy13
61 13
th Av
enue
Sou
th, S
uite 2
30
Jack
sonv
ille B
each
, Flor
ida 32
250
Tel 9
04.24
1.999
7 F
ax 90
4.241
.7526
w
ww.en
barch
itects
.comArch
itects
ST. J
OHNS
COU
NTY
BUILD
ING
SERV
ICES
RENO
VATI
ON &
REM
ODEL
ING
- FIR
ST F
LOOR
ST
. A
UG
US
TIN
E, F
L
AA00
0298
6
IF SHEET IS LESS THAN 22" X 34", IT IS A REDUCED PRINT - SCALE REDUCED ACCORDINGLY
PROJECT NO.
15056
ISSUE DATE :
REVISIONS :
02/12/18
ISSUED FOR BID
NOT FOR
CONSTRUCTION
FA1.1
FIR
E A
LA
RM
P
LA
N - 1S
T F
LO
OR
JLS
N
SCALE: 1/8" = 1'-0"
FIRE ALARM PLAN - 1ST FLOOR
SPECIFIC NOTES:
GENERAL NOTES:
160
STAIRS
125
STAIRS
101
WAITING
105
MEETING
ROOM
ELEV
104
FOYER
106
WOMEN
107
MEN
156
TRAINING
ROOM
155
FOYER
159
MEN
158
WOMEN
126
SHOWER
ROOM
122
JAN.
123
MEN
124
WOMEN
121
CORR.
161
COMM.
ROOM
140
ELEC.
114
DOH
IT
144
BREAK
ROOM
118
BREAK
ROOM
157
JAN.
171
STOR.
CASHIER
110
DOH
112
OFFICE
113
OFFICE
132
OFFICE
133
OFFICE
136
OFFICE
137
OFFICE
127
OFFICE
128
OFFICE
130
OFFICE
131
OFFICE
134
OFFICE
135
OFFICE
138
OFFICE
139
OFFICE
170
OFFICE
168
OFFICE
166
OFFICE
164
OFFICE
163
OFFICE
167
OFFICE
117
PLAN
ROOM
148
OFFICE
149
OFFICE
154
MECH.
ROOM
151
OFFICE
152
OFFICE
150
OFFICE
147
OFFICE
143
CORR.
146
CORR.
165
CORR.
16
2
CO
RR
.
145
CORR.
15
3
CO
RR
.
14
1
CO
RR
.
129
CORR.
108
CORR.
11
6
CO
RR
.
102
INTAKE
103
INTAKE
142
CORR.
109
SCANNING
111
OFFICE
169
OFFICE
119
STOR.
120
STOR.
109A
COPY
115
CORR.
A1 A3 A5 A7
A6A4A2
B5 B3 B1
B4 B2
C4 C2
C5 C3 C1
A9
A8 A10
FA1.1
1
SCALE: NTS
FIRE ALARM ONE LINE RISER DIAGRAM
FA RISER GENERAL NOTES:
2/12/2018 11:41:10 AM, Simes & Rosch, LLC
AutoCAD SHX Text
'HM1'
AutoCAD SHX Text
'H1A'
AutoCAD SHX Text
'P1B'
AutoCAD SHX Text
'P1C'
AutoCAD SHX Text
'T1A'
AutoCAD SHX Text
'P1A'
AutoCAD SHX Text
DAVID W. SIMES
AutoCAD SHX Text
FL PE# 51249
AutoCAD SHX Text
EXISTING FIRE ALARM CONTROL PANEL WITH BATTERY BACKUP. SEE FIRE ALARM RISER IN ON THIS SHEET FOR MORE INFORMATION. PROVIDE BOOSTER PANELS AS REQUIRED. EXISTING FIRE ALARM ANNUNCIATOR PANEL. SEE FIRE ALARM RISER DIAGRAM ON THIS SHEET FOR MORE INFORMATION.
AutoCAD SHX Text
1. RELOCATE EXISTING AND PROVIDE NEW FIRE ALARM DEVICES AS SHOWN. PROVIDE CABLING AND CONDUIT AS NECESSARY TO CONNECT TO EXISTING FIRE ALARM PANEL. NEW DEVICES SHALL BE COMPATIBLE WITH EXISTING PANEL. 2. ALL EXPOSED CABLING SHALL BE PLENUM RATED. 3. CONFIRM THAT EXISTING FIRE ALARM CONTROL PANEL IS INTERFACED WITH SECURITY SYSTEM TO ENSURE PROPER DOOR RELEASE WHERE REQUIRED. 4. CONFIRM THAT A TAMPER SWITCH IS PROVIDED WITH ANY EXISTING BACKFLOW PREVENTORS.
AutoCAD SHX Text
1
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
D
AutoCAD SHX Text
P
AutoCAD SHX Text
F
AutoCAD SHX Text
T
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
RL
AutoCAD SHX Text
FACP
AutoCAD SHX Text
EX
AutoCAD SHX Text
1
AutoCAD SHX Text
ANN
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
EX
AutoCAD SHX Text
RL
AutoCAD SHX Text
BATT
AutoCAD SHX Text
DIGITAL ALARM COMMUNICATING TRANSMITTER
AutoCAD SHX Text
EXISTING ADDRESSABLE FIRE ALARM CONTROL PANEL (FACP)
AutoCAD SHX Text
EXISTING REMOTE ANNUNCIATOR
AutoCAD SHX Text
EXISTING DUCT SMOKE DETECTOR AT AHU'S RETURN DUCTS. CONFIRM LOCATION WITH LOCAL CODES.
AutoCAD SHX Text
.....
AutoCAD SHX Text
EXISTING SMOKE DETECTORS
AutoCAD SHX Text
EXISTING HEAT DETECTORS
AutoCAD SHX Text
EXISTING PULL STATIONS
AutoCAD SHX Text
EXISTING HORNSTROBES
AutoCAD SHX Text
.....
AutoCAD SHX Text
.....
AutoCAD SHX Text
D
AutoCAD SHX Text
P
AutoCAD SHX Text
D
AutoCAD SHX Text
P
AutoCAD SHX Text
D
AutoCAD SHX Text
P
AutoCAD SHX Text
.....
AutoCAD SHX Text
EXISTING STROBES
AutoCAD SHX Text
.....
AutoCAD SHX Text
.....
AutoCAD SHX Text
TO TELEPHONE BACKBOARD
AutoCAD SHX Text
TELEPHONE CABLES
AutoCAD SHX Text
TO DEDICATED 120V CIRCUIT
AutoCAD SHX Text
1. CONTRACTOR TO CONFIRM THE CONDITION OF THE EXISTING FIRE ALARM SYSTEM. THE CONTRACTOR SHALL RELOCATE EXISTING AND PROVIDE NEW PULL STATIONS, STROBES, SMOKE, AND HEAT AND DUCT DETECTORS AS NECESSARY FOR A COMPLETE SYSTEM. THE FIRE ALARM SYSTEM SHALL COMPLY WITH ALL APPLICABLE CODES INCLUDING NFPA 72, NFPA 90A, THE FLORIDA FIRE PREVENTION CODE, THE FLORIDA BUILDING CODE, AND NFPA-70 (ARTICLE 760). COORDINATE INSTALLATION WITH A QUALIFIED FIRE ALARM VENDOR. THE FIRE ALARM CONTRACTOR SHALL PROVIDE DETAILED INSTALLATION DRAWINGS (SHOP DRAWINGS) FOR PERMIT. DRAWINGS SHALL INCLUDE: VOLTAGE DROP, POWER AND BATTERY CALCULATIONS FOR ALL DEVICES. 2. PROVIDE FIRE ALARM EXTENDER OR BOOSTER PANELS AS REQUIRED. EXTENDER PANELS SHALL BE LOCATED NEXT TO A SMOKE DETECTOR AND SHALL BE POWERED VIA A120V DEDICATED CIRCUIT.
AutoCAD SHX Text
NEW HEAT DETECTORS
AutoCAD SHX Text
NEW SMOKE DETECTORS
AutoCAD SHX Text
NEW PULL STATIONS
AutoCAD SHX Text
NEW HORNSTROBES
AutoCAD SHX Text
NEW STROBES
AutoCAD SHX Text
BATT
AutoCAD SHX Text
NEW ADDRESSABLE FIRE ALARM EXTENDER PANEL (AS REQUIRED)
AutoCAD SHX Text
TO NEW DEDICATED 120V CIRCUIT
AutoCAD SHX Text
COMMUNICATIONS CABLE ROUTED IN 1" CONDUIT (AS REQUIRED)
AutoCAD SHX Text
NEW STROBES
AutoCAD SHX Text
NEW HORNSTROBES
AutoCAD SHX Text
NEW PULL STATIONS
AutoCAD SHX Text
NEW HEAT DETECTORS
AutoCAD SHX Text
NEW SMOKE DETECTORS
AutoCAD SHX Text
F
AutoCAD SHX Text
T
AutoCAD SHX Text
EXISTING TAMPER AND FLOW
AutoCAD SHX Text
ELEVATOR CONTROL (RECALL)
AutoCAD SHX Text
SECURITY SYSTEM