ref.: tender no. tce.6079a-b-610-024 10-05-2011...ref.: tender no. tce.6079a-b-610-024 10-05-2011...

Ref.: Tender No. TCE.6079A-B-610-024 10-05-2011 Tender for Cooling water Pumps Due Date: 03-06-2011 Dear Sirs, Please submit your competitive offer in strict conformity to the documents enclosed herewith. Kindly return the “Acknowledgement & Intention to Bid” form, duly filled, immediately on receipt of this enquiry document. Offers may kindly be furnished as per the Instructions to Bidders (ITB) enclosed herewith. Thanking You, Yours truly For TATA Consulting Engineers Limited,

A Venkateswaran Project Manager

TENDER. NO. TCE.6079A-B-610-024

TATA CONSULTING ENGINEERS LIMITED SECTION: Title

Master Index SHEET i OF iv

ISSUE

R0

MASTER INDEX

TO

BIDDING DOCUMENT FOR COOLING WATER PUMPS

BHARAT PETROLEUM CORPORATION LIMITED, MAHUL, MUMBAI

(BIDDING DOCUMENT NO: TCE-6079A-B-610-024)



Master Index SHEET ii OF iv

ISSUE

R0

PART – I: GENERAL & COMMERCIAL

SL. NO.

SPECIFICATION NO. REV NO. DESCRIPTION NO. OF SHEETS

1. Acknowledgement & Intention To Bid 2

2. TCE.6079A-B-610-024 R0 Instructions To Bidders 20

Schedule Of Bidder’s Experience 1

Schedule Of Deviations From General Conditions

1

Schedule Of Deviations From Technical Specifications

1

Annual Turn over statement 1

Check List For Submission Of Bid 3

3. TCE.6079A-B-610-024 Integrity Pact 4

4. TCE.6079A-B-610-024 R0 Scope of Work 2

5. TCE.6079A-B-610-024 R0 Scope of Supply 3

6. TCE.6079A-B-610-024 R0 Time Schedule 2

7. TCE.6079A-B-610-024 R0 Terms of Payment 3

8. TCE.6079A-B-610-024 R0 Quality Management System 6

9. TCE.6079A-B-610-024 R0

General Purchase Conditions – Indigenous Material & Equipment

9

10. TCE.6079A-B-610-024 R0

General Purchase Conditions – Imported Material & Equipment

8

11. TCE.6079A-B-610-024 R0 Special Purchase Conditions 3

12. TCE.6079A-B-610-024 R0 Loading and Penalty Criteria 3

13. TCE.6079A-B-610-024 R0 List of Approved Makes / Vendors 59

14. TCE.6079A-B-610-024 R0

Commercial Questionnaire - Imported Material & Equipment

6

15. TCE.6079A-B-610-024 R0

Commercial Questionnaire – Indigenous Material & Equipment

5

16. TCE.M4-903 R5 Drawings, Engineering Documents and Instruction Manuals

6

17. TCE.M4-907 R7 Spares and Maintenance Tools and Tackles

2

18. TCE.M4-908 R6 Training of Purchaser’s Personnel 1

19. TCE.M4-914 R7 Progress Schedule and Reports 3

20. TCE.6079A-954 R0 Schedule of Distribution of Drawings 2



Master Index SHEET iii OF iv

ISSUE

R0

SL. NO.


and Documents

21. TCE.6079A-B-610-024 R0 Schedule of Mandatory Spares 3

22. TCE.6079A-B-610-024 R0 Performance Guarantee Parameters 4

23. TCE.6079A-B-610-024 R0 Schedule Of Price 7



Master Index SHEET iv OF iv

ISSUE

R0

PART II - TECHNICAL

SL. NO.


1. TCE.6079A-B-610-024 R0 Scope of Works 1

2. TCE.6079A-B-610-024 R0 Cooling Water Pumps 19

3. TCE.6079A-B-610-024 R0 Circulating Water Analysis 1

4. TCE.6079A-B-610-024 R0 Cooling Water Pumps 3

TCE.M4-105-01 R10 Data Sheet B 3

R10 Data Sheet C 4

6. TCE.6079A-B-610-024 R0 Steam Turbine Drive and Accessories 6

R1 Data Sheet B 12

R2 Data Sheet C 13

7. TCE.6079A-B-610-024 R0 Design Engineering practice on Petroleum refinery paint coating

81

8. TCE.6079A-104-02 R0 Thermal Insulation for Hot and Cold Surfaces

44

9. TCE.6079A-187-01 R0 Welding specification for shop and site fabricated equipment

21

10. TCE.6079A-184-01 R0 Welding Specification for Piping Systems 26

11. TCE.M4-904 R9 Shop Inspection and Tests 7

12. TCE-6079A-186-21 R0 Minimum inspection requirements for steam turbine rotors & turbine assembly

3

13. TCE-6079A-186-22 R0 Minimum inspection requirements for steam turbine casings

3

16. TCE.6079A-186-08 R0 Shop inspection requirements for rotating machines - mechanical

1

17. TCE.6079A-186-40 R0 Shop inspection requirements for gear Boxes

1

18. TCE.6079A-CH-

300-DC-01

P0 Project Design Basis 56

19. TCE.6079A-B-610-024 P0 Experience Record Proforma 15

Electrical

20. TCE.6079A-B-610-024 R0 Electrical requirements for cooling water circulation pumps

1

21. TCE.6079A-B-Z-203 R0 High Voltage Induction Motor 21

Instrumentation

22. TCE.6079A-B-610-024 R0 Instrumentation System 21

ACKNOWLEDGEMENT & INTENTION TO BID

Attention: Mr. N Swaminathan / Mr. Vinayak C Parab

TATA Consulting Engineers Limited, Raj Plaza, Second Floor, LBS Marg, Vikhroli (W). Mumbai- 400 083. Phone: 022-6647 2111 Fax: 022-6647 2000

SUB: CONFIRMATION TO BID

TENDER / ENQUIRY NO.___________________ DTD._______

WORK / ITEM: _______________________________________ Dear Sirs,

We hereby acknowledge receipt of a complete set of bid document along with enclosures for the subject work / item as per the table of contents for our use in preparing the bid.

We undertake that the contents of the above tender document shall be kept confidential and further that the drawings, specifications, and documents shall not be transferred and the said documents will be used only for the purpose which they are intended.

(A) We intend to bid as requested for the subject items and furnish following details with respect to our offices:

Quoting Office Contact Person at Mumbai, if any, for Indian Bidders & Contact Person in India for Foreign Bidders

Postal Address:

Postal Address:

Telephone Number: Telephone Number:

Fax Number: Fax Number:

e-mail address: e-mail address:

Contact Person: Contact Person:

Mobile Number: Mobile Number:

(B) We confirm that our offer shall be submitted within the due date.

(C) We are unable to bid for reasons given below and we are returning the entire set of tender documents

Reasons for Non-Submission of Bid:

___________________________________________________________________

___________________________________________________________________

___________________________________________________________________

______________________________________________________

Company’s Name: ______________________________

Signature: ______________________________

Name: ______________________________

Designation: ______________________________

Date: ____________

Note: Bidders are requested to furnish the details mentioned in (A), (B) or (C) above, immediately after receipt of tender documents

TENDER.NO. TATA CONSULTING ENGINEERS LIMITED SECTION: ITB

TCE.6079A-B-610-024 INSTRUCTIONS TO BIDDERS SHEET 1 OF 28

ISSUE

R0

1 INTRODUCTION

1.1 Bharat Petroleum Corporation Limited (BPCL) is in the process of installing a 1.2 MMTPA Continuous Catalytic Regeneration Reformer (CCR) and Naphtha Hydro Treater (NHT) unit in their Mumbai Refinery at Mahul. TATA Consulting Engineers Limited (TCE) has been appointed as the Project Management Consultant to provide Engineering, Procurement and Construction Management services for the utilities and offsites for CCR/NHT units.

1.2 TCE on behalf of BPCL invites sealed bids under two bid system for the entire work covered in the bidding document. All bids are to be completed and returned in accordance with tender requirements within the duration as mentioned below.

2 IMPORTANT POINTS TO BE NOTED

2.1 Due date for submission of bids: 14:30 Hrs of 03-06-2011 at TCE, Vikhroli, Mumbai office

2.2 Technical un-priced bid opening: 15:00 Hrs of bid due date at TCE, Vikhroli, Mumbai office

2.3 Required completion period: The cooling water pumps shall be manufactured, supplied to site within 9 months for domestic bidders and 8 months FOB port of exit basis for foreign bidders.

2.4 Completion period indicated is from the date of placement of Fax / Letter of Intent.

2.5 Bid Validity: Bids shall remain valid for 4 months after the deadline for bid submission.

2.6 Bid security / Earnest Money Deposit (EMD): Rs.15 Lakhs.

2.7 Bidders to note the Bid Rejection Criteria as detailed below.

2.8 Offers to be submitted to TCE, II Floor, Raj Plaza, Vikhroli, Mumbai office.

2.9 The offers submitted by bidders shall be either neatly spiral bounded or hard bounded. Offers submitted in loose/stapled papers will not be accepted.

3 BIDDER’S QUALIFICATION CRITERIA

3.1 Technical Criteria

3.2.1. Bidder should be a manufacturer of Centrifugal pumps & shall have his own

engineering, manufacturing and testing facilities for the same.

3.2.2. Bidder should have supplied at least one Horizontal Centrifugal Pump

conforming to API 610, 6th edition for a minimum rated discharge capacity of

3,920 m3/hr for water service during the past five years.

PART I Page 1 of 169



ISSUE

R0

3.2.3. The Pump thus supplied should have been in satisfactory operation at least

for a period of one year after commissioning. The Five year period includes

one year period satisfactory operation shall be reckoned as of 31-12-2010.

3.2 Financial Criteria

3.2.1. Bidder shall have supplied in the previous 5 (five) year period, at least One Pump along with prime-mover of order value not less than Rs 1,87,50,000/-.

Or

Bidder shall have supplied in the previous 5 (five) years period, at least Two Pumps along with prime-movers of each order value not less than Rs 1,25,00,000/-.

3.2.2. The average annual turnover of the bidder during the preceding 3 (three) financial years should be at least Rs 7,33,00,000/-.

3.2.3. The bidder shall have earned a net profit for the last three consecutive financial years i.e. 2007-2008, 2008-2009 & 2009-2010.

3.2.4. The net worth of the bidder as per the audited annual financial results for the financial year 2009-2010 should be positive.

Offers of bidders fulfilling all the qualification criteria as mentioned above will only be considered for further technical and commercial evaluation.

4 BIDDING DOCUMENTS

4.1 Bidding documents consist of:

(a) Scope of work / supply

(b) Acknowledgement Letter format

(c) Instructions to Bidders (ITB)

(d) General Purchase Conditions (GPC)

(e) Commercial Questionnaire (Indigenous Bidders)

(f) Commercial Questionnaire (Foreign Bidders)

4.2 The bidder is expected to examine the bidding documents, including all instructions, forms, General Purchase Conditions / General Conditions of Contract, Special Purchase Conditions / Special Conditions of Contract, Technical Specifications, Drawings and other documents and to fully familiarize itself with the requirements of the bidding documents. Failure to furnish all the information required by the Bidding Documents or the submission of a bid not substantially responsive to the Bidding Documents in every respect may result in the rejection of the Bid.

4.3 Immediately on receipt of Bidding Document, Bidder shall acknowledge the receipt and confirm his intention to bid for the tendered work / scope of supply as per the Acknowledgement format given in Bidding Document.

5 BID DOCUMENT FEES AND COST OF BIDDING




ISSUE

R0

5.1 Bidders shall deposit Tender fees of of INR 1,000/- (25 USD) in the form of Demand Draft / Pay Order drawn in favour of "Bharat Petroleum Corporation Ltd." payable at Mumbai prior to submission of bids or at the time of submission of bids. Bids from bidders who have not paid Tender fees will not be considered for evaluation.

5.2 The bidder shall bear all costs associated with the preparation and delivery of its bid including (but not limited to) costs and expenses related to visits to the site(s) and other locations, and the cost of any tests, investigations, evaluations and consultations. BPCL/TCE will in no case be responsible or liable for any costs regardless of the outcome of the bidding process.

6 EARNEST MONEY DEPOSIT

6.1 The EMD /Bid Security shall be in equivalent US dollars for foreign Bidders (either in the form of Crossed Demand Draft / Pay Order / non-revocable Bank Guarantees from any Indian scheduled bank which includes Indian branch of foreign bank recognized as scheduled bank by RBI, of DD or BG in favor of BPCL).

6.2 Foreign Bidders may also submit bank guarantee from an international bank of repute having a branch in India or having correspondent banking relationship with an Indian scheduled bank, in which case the Bank Guarantee shall be countersigned by their Indian Branch or by any Scheduled Indian Bank.

6.3 The bid security shall be in US Dollars for foreign bidders and in Indian Rupees for domestic bidders. Standard Bank Guarantee format of BPCL shall be used.

6.4 EMD amount shall be INR 15 Lakhs (USD 34,650).

6.5 The Bank Guarantee for EMD shall be valid for a period of 6 months from Bid Due Date.

6.6 Only Bidders registered with Bharat Petroleum Corporation Ltd are exempted from furnishing EMD. Bidder(s) claiming exemption from EMD for being registered with BPCL shall submit documentary proof of their registration with BPCL. If required, such bidders can write to:

DGM (P&CS)-Bharat Petroleum Corporation Ltd

Adminstration Building,

BPCL Refinery, Mahul, Mumbai – 400704

Phone: +91- 22 -2553 3270 / 2553 3272

For confirmation for registration, atleast one week prior to due date.

6.7 EMD will be forfeited if the bidder –

6.7.1 Modifies / withdraws the offer during the validity period of the bid from due date or extended due date of the tender

Or

6.7.2 Does not produce acceptance of Letter Of Intent of purchase order within 7 days time from the date of issue by BPCL




ISSUE

R0

Or

6.7.3 Does not furnish security deposit of the required amount in stipulated time after issuance of LOI regarding award of contract and /or award of contract.

6.8 After acceptance of order by successful bidder, BPCL shall return the EMD to all unsuccessful bidders. EMD shall be returned to the successful bidder after he submits the security deposit as per GCC of required amount in stipulated time after issue of LOI / PO.

7 DUE DATE FOR SUBMISSION OF BIDS

7.1 As indicated in item Sr. No. 2 above, the Original bid together with required copies must be received by the designated authority on or before the due date & time.

7.2 TCE may, at its discretion, extend the deadline for the submission of bids by amending the bidding documents, in which case all rights and obligations of the TCE and bidders previously subject to the deadline, will thereafter be subject to the deadline as extended.

8 MODIFICATION & WITHDRAWAL OF BIDS

8.1 The bidder may modify or withdraw his bid after the bid's submission, provided that written notice of the modification or withdrawal is received by TCE prior to the deadline prescribed for submission of bids.

8.2 The bidder's modification or withdrawal notice shall be prepared, sealed, marked and dispatched in accordance with the provisions for submission of bids.

8.3 A bid may not be withdrawn or modified after the deadline for submission of bids during the period of bid validity without forfeiting the bid security unless the modification shall be made upon an invitation by TCE permitting the bidder to modify the bid.

8.4 If a bid is properly modified within the foregoing provisions, the bid as modified shall constitute the bid offer.

9 LATE BIDS

Any bid received by TCE after the deadline for submission of the bids (including any extension(s) hereof) will be declared "Late" and rejected and returned unopened to the bidder.

10 BID VALIDITY

10.1 Bids shall remain valid for a period as indicated in Sr. no. 2 above.

10.2 Notwithstanding the above, TCE may solicit the bidder's consent to an extension of the period of bid validity. The request and the responses thereto shall be made in writing (by fax/ email).

10.3 A bidder accepting the request for extension shall not be permitted to modify his bid because of the extension, unless specifically invited to do so.




ISSUE

R0

11 BID REJECTION CRITERIA

11.1 Prior to detailed bid evaluation, TCE / BPCL will determine the substantial responsiveness of each bid with respect to the bidding documents. A substantially responsive bid is one which conforms to the terms, conditions and specification of the Bidding Documents without material deviation. A material deviation is one which affects in any substantial way the scope, quality or performance of the works, or which limits in any substantial way, inconsistent with the bidding documents, the TCE’s /BPCL's rights or the bidder's obligations as envisaged in the bidding documents, and the rectification of which deviation or reservation would affect unfairly the competitive position of other bidders presenting substantially responsive bids. Further examination of only such bids as are determined to be substantially responsive shall be taken up, unless otherwise determined by BPCL/TCE.

11.2 The bidders shall adhere to the following provisions of the Bidding Document without taking any deviations, failing which the Bid shall be considered to be non-responsive and may be rejected.

(a) Defect liability period.

(b) Submission of prices without any erasures or corrections.

(c) Bids with Price variation clause.

(d) Force Majeure clause.

(e) Aribitration clause.

(f) Specific clause with respect to delivery period shall be put on case to case basis if required.

12 CLARIFICATIONS

12.1 Clarifications that the Bidder needs to have on the tender specification can be sought from TCE at the time of pre-bid meeting, which shall be held on the date and venue indicated in Sl. No. 2.0 above.

12.2 Bidders shall send all queries to TCE at least 3 days in advance before the pre-bid meeting date.

12.3 All such correspondence shall be routed to the following address in an envelope "Clarifications for Enquiry No. XXXX":

TATA Consulting Engineers Limited, Raj Plaza, Second Floor, LBS Marg, Vikhroli (W). Mumbai- 400 083 Ph: 022-6647 2111 Fax: 022-6647 2000 Contact person: Mr. N Swaminathan / Mr. Vinayak C Parab Tel: +91 22 6689 2285 / 6647 2035

12.4 Written queries only shall be replied.

13 OPENING OF TECHNICAL & UN-PRICED COMMERCIAL BIDS

13.1 Technical and unpriced commercial bids shall be opened at TCE Mumbai office at 15.00 hrs on the due date as mentioned above in presence of the




ISSUE

R0

bidder's representatives. Only the name of the bidders who have responded to the enquiry will be read before the bidder's representatives(s) duly authorized to attend such opening by a person competent and having the Power of Attorney to bind the Bidder. The Bidder's representative(s) who choose to attend and are present shall sign a register evidencing their attendance.

14 OPENING OF PRICE BIDS

Substantially responsive bidders will be shortlisted by BPCL/TCE for opening of price part of their bids. Date, time and venue for opening of price bids will be informed to the shortlisted bidders subsequently. Only the final bid cost will be read before the bidder's representative(s) duly authorized to attend such opening by a person competent and having the Power of Attorney to bind the Bidder. The Bidder's representative(s) who choose to attend and are present shall sign a register evidencing their attendance.

15 SITE LOCATION / SITE VISIT

15.1 The Project Site is located in Mahul near Chembur, Mumbai in the State of Maharashtra. Mumbai is well connected by Rail and Road from other parts of India.

15.2 The bidder is advised to visit and examine the site of works and its surroundings and obtain for itself on its own responsibility all information that may be necessary for preparing the bid and entering into the Contract. Claims of any kind due to variation or ignorance of site conditions and environmental conditions will not be eligible in any circumstances.

15.3 The bidder and any of its personnel or authorized representatives will be granted permission by BPCL to enter upon its premises and lands for the purpose of such inspection. It is understood that as an implicit condition of such permission, the bidder, its personnel and/or authorized representative(s) shall be understood to have released and indemnified BPCL and its personnel from and against all liability in respect thereof and to have assumed all responsibility for personal injury (whether fatal or otherwise), loss of or damage to person or property and any other loss, damage, cost and expenses incurred as a result of such visit, including those sustained by any negligence or other act of tort on the part of BPCL and/or its personnel and Consultants. During such visits the Bidder shall abide by all the rules and regulations, as applicable. Bidders may contact TCE for site visit purpose.

16 COMPLETE SCOPE OF WORK

16.1 The complete scope of supplies and work/services has been defined in the bidding documents. Only those bidders who take complete responsibility and who bid for the complete scope of supplies and work/services as contained in the bidding document may be considered for further evaluation.

16.2 Waiver of deviations and conditions (if any), should be submitted by the Bidders before the opening of the Priced Bid failing which the Priced Bid of concerned Bidder shall not be opened.




ISSUE

R0

17 AMENDMENT OF BIDDING DOCUMENTS

17.1 At any time prior to the deadline for submission of bids as well as up to priced bid opening, TCE may, for any reason whether at its own initiative or in response to a clarification or modification requested by any prospective Bidder(s), modify the Bidding documents.

17.2 The modifications/amendment will be notified in writing or by fax to all prospective bidders who have been issued the Bidding documents, and shall be part of the Bidding documents and shall be binding on all bidders. The Bidders will be required to acknowledge receipt of any such amendment to the Bidding documents. Bidders shall confirm the inclusion of Addendum / Corrigendum in their bid and shall follow the instructions issued along with addendum / corrigendum.

17.3 Bidders shall examine the Bidding documents thoroughly and inform TCE of any apparent conflict, discrepancy or error, so that TCE may issue appropriate clarification(s) or amendment(s), if required.

18 BIDDING DOCUMENTS AND DEVIATIONS

It is expected that bidders will submit bids based strictly on the terms and conditions and specifications contained in the bidding documents and will not stipulate any deviations. Should it, however, become unavoidable, deviations should be separately and specifically stipulated only in the "Deviation Sheet". Deviations mentioned anywhere else in the offer other than the "Deviation Sheet" shall not be acceptable considered for bid evaluation. TCE reserves the right to reject as non-responsive any bid containing major deviation(s).

19 LANGUAGE OF BIDS

19.1 The Bid prepared by the bidder, all documents attached to and/or relating to the bid and all correspondence exchanged by the Bidder and BPCL/TCE, shall be written in English language only.

19.2 Any printed literature furnished by the bidder may be written in any other language provided that this literature is accompanied by an authenticated English translation, in which case, for purpose of interpreting the Bid, the English translation shall govern.

20 PRICE BID

20.1 The item wise Bid prices (if applicable) shall be filled in the "Format for Submitting Prices".

20.2 Bidders shall quote indicting separately basic cost, all taxes, duties, levies, octroi applicable, packing & forwarding charges, transportation charges etc. and the final landed cost at site.

20.3 Bidders shall indicate the applicable present rate of excise / customs duty, CVD, education cess and VAT/CST, Service Tax, the same shall be payable on production of documentary evidence issued from concerned authority.

20.4 This part shall not contain any condition whatsoever failing which the Bids shall be liable to be rejected. In case of any correction, the bidder shall put its




ISSUE

R0

signature and its stamp. Eraser fluid will not be allowed for making any correction.

20.5 The prices quoted by the bidder shall remain firm and fixed and shall be valid until completion of the Contract and shall not be subject to variation/escalation on any account except as otherwise specifically provided in the Contract documents.

20.6 A Counter trade proposals shall not be considered in the evaluation of Bids or otherwise.

20.7 It shall be the duty of the supplier to duly observe and perform all laws, rules, regulations, orders and formalities applicable to Excise Duty, Sales Tax, VAT, Service tax, Customs Duty, Countervailing Duty etc. on the import, manufacture, sale and/or supply of any material to BPCL and performance of the works under the Contract. The supplier/contractor shall keep BPCL indemnified from and against any and all claims, demands, prosecutions, actions, proceedings, penalties, damages, demurrages and/or other levies whatsoever made or levied by any Court, Tribunal or the Customs or other Authorities with respect to any alleged breach, evasion or infraction of such duties, taxes, charges or levies or any breach or infraction of any applicable laws, rules, regulations, orders or formalities concerning the same and from the consequence thereof.

20.8 The bidder shall indicate the total quoted price both in figures as well as in words in the format for submitting prices.

21 CURRENCIES OF BID

21.1 Foreign Bidders shall quote prices for materials and services in USD only.

21.2 Bidders shall quote the price for materials and services to be procured from India and for expenses to be incurred in Indian Rupees only.

21.3 For evaluation purposes, the foreign currency bid price shall be converted to Indian Rupees by considering Bill selling foreign exchange rate declared on Reserve Bank of India web site as on the date of priced bid opening.

22 QUERIES / CLARIFICATIONS

22.1 The bidder is requested to submit any queries / clarification / information pertaining to Bidding Document in writing delivered by hand or by mail. This shall be addressed to Mr. N Swaminathan / Mr. Vinayak C Parab – Tata Consulting Engineers Limited, Mumbai within one week from the date of receipt of bidding documents. Any failure by Bidder to submit queries / clarification / information pertaining to Bidding Documents in writing shall not absolve the Bidder, after subsequent placement of Order/ Contract, of his responsibility to perform the work in accordance with the Order / Contract.

22.2 TCE's responses to Bidder's queries/clarifications raised will be furnished as expeditiously as possible to all the vendors who have been issued Bidding Documents. Any modification of the Bidding Documents which may become necessary shall be sent to all bidders through the issue of an Addendum.

23 FORMAT AND SIGNING OF BID




ISSUE

R0

23.1 The original and all copies of the bid shall be typed or written in indelible ink and shall be signed by the bidder or a person or persons duly authorized to sign on behalf of the bidder. Such authorization shall be indicated by written power of attorney accompanying the bid. All pages of the bid, except for un-amended printed literature, shall be initialed by the person signing the bid. The name and position held by each person signing must be typed or printed below the signature.

23.2 The bid shall contain no interlineations, erasures or overwriting except as necessary to correct errors made by the bidder, in which case, such corrections shall be signed in full by the person or persons signing the bid.

24 ALL PAGES TO BE INITIALLED

24.1 All signatures in bids shall be dated and shall bear a seal of the bidder. In addition, all pages of the bids before submission of the bid shall be initialed at lower right hand corner by the Bidder or by a person holding a Power of Attorney authorizing him to sign on behalf of the bidder. The un-priced technical bid shall include all pages of tender enquiry (commercial part and technical part) duly signed and stamped by the bidder.

24.2 The Bidder shall sign and affix its seal on all pages of the Priced bid.

25 CORRECTIONS AND ERASURES

25.1 Bidders are required to fill in the tender documents with due care so as to avoid any cuttings/corrections/alterations in the entries made in the tender papers.

25.2 In case any corrections are required, the original writings shall be neatly cut/ penned through and re-written nearby. No overwriting or erasure of original writings by use of 'white fluid' or the like is permitted. In case any erasure using 'white correcting fluid' is found, the tender may be liable to be rejected.

25.3 All cuttings/ corrections/ alterations shall be signed in full by the tenderer with date. Numerical figures shall be written both in figures as well in words.

26 CLARIFICATIONS OF BIDS

To assist in the examination, evaluation and comparison of bids, BPCL/TCE may, at its discretion, ask the bidder for a clarification of his bid. All responses to a request for clarification shall be in writing, and no change in the price or substance of the bid shall be permitted unless specifically sought by BPCL/TCE.

27 TECHNO-COMMERCIAL EXAMINATION OF BIDS

27.1 BPCL/TCE will examine or cause to be examined the bids to determine whether they are complete, whether the documents have been properly signed, and whether the bids are generally in order.




ISSUE

R0

27.2 BPCL/TCE will determine to its subjective satisfaction whether the bidder has submitted a responsive bid and is qualified to satisfactorily perform the work, and such determination shall not be open to question.

27.3 The determination will also take into account the bidder's financial and technical capabilities, as well as such other qualifications as BPCL/TCE deem necessary and appropriate.

28 EVALUATION AND COMPARISON OF PRICES

28.1 To facilitate evaluation and comparison of prices, the BPCL/TCE will convert all bid prices expressed in USD into Indian Rupees at selling rate of the concerned foreign currency declared on the web site of Reserve Bank of India on the date of opening of price Bids.

28.2 Where only Indian Bids are under comparison

Bids shall be evaluated on the basis of net effective price i.e. landed cost at

Site including third party inspection charges (if applicable) by approved third

party inspection agency minus CENVAT / Set off benefit available to BPCL.

28.3 Where only Foreign Bids are under comparison

Bids shall be evaluated on CIF port of exit basis including third party

inspection charges (if applicable) considering ocean freight and marine

insurance as 6% of FOB price for Europe/Japan/Asia and 9% of FOB price for

Australia / American continent.

28.4 Where Indian as well as Foreign Bids are under comparison

28.4.1 Domestic Bidders

(a) Bids shall be evaluated on the basis of net effective price i.e. landed cost at Site including third party inspection charges (if applicable) by third party inspection agency as nominated by BPCL minus CENVAT / Set off benefit available to BPCL.

(b) CENVAT / Set off benefit available to BPCL shall be considered during price evaluation.

28.4.2 Foreign Bidders

Bids shall be evaluated on the basis of landed cost at Site including third

party inspection charges by approved third party inspection agency.

(a) F.O.B. price quoted by the bidder (including stowage charges in case of pipes)

(b) Ocean freight and marine insurance as under:

(i) Europe / Japan / Asia : 6% of FOB price

(ii) Australia / American Continent : 9% of FOB price

(c) Prevailing rate of Customs duty calculated with Landing Charges @ 1% of CIF Value

(d) Port handling charges @ 2% of FOB value




ISSUE

R0

(e) Inland freight charges from Mumbai port(India) to project site(s) @ 2% of landed cost, i.e., sl.no.(a )to (e)

28.5 Any other loading towards factors like Power & Utilities consumption etc as indicated in technical specifications.

29 REBATE

No suo-moto reduction in price(s) by bidders is permissible after opening of the bid. If any Bidder unilaterally reduces the price(s) quoted by him in his bid after opening of bids, such reduction shall not be considered for comparison of prices but shall be binding on the Bidder if he happens to be selected for award of work.

30 CONTACTING BPCL

A bidder shall not contact BPCL on any matter relating to his bid from the time of bid opening to the time, that the Contract is awarded, unless requested to do in writing. Any effort by a bidder to influence BPCL in BPCL's decisions in respect of bid evaluation or contract award will result in the rejection of that bidder's bid.

31 BPCL's RIGHT TO ACCEPT/REJECT BIDS

31.1 BPCL/TCE reserves the right to accept or reject any bid and to annul the bidding process and reject all bids at any time prior to award of Contract without thereby incurring any liability to the affected bidder(s) or any obligation to inform the affected bidder(s) of the ground of BPCL's/TCE's action.

31.2 BPCL/TCE shall not be obliged to award the Order / Contract to the lowest evaluated bidder if BPCL/TCE apprehends that it will not be in the interest of BPCL/TCE to award the Order / Contract at the lowest evaluated price or to the lowest evaluated bidder.

32 CONFIDENTIALITY OF DOCUMENTS

32.1 Bidders shall treat the bidding documents and contents therein as strictly confidential. If at any time, during the bid preparation period, Bidder decides to decline to bid; all documents must be immediately returned to BPCL.

33 PREPARATION & SUBMISSION OF BIDS - TWO BID SYSTEM

33.1 The bidder is required to prepare bid in a format as outlined below in order to achieve the objective of maintaining a uniform proposal structure from all bidders.

33.2 Technical Bid: Shall contain documents / information as below:

(a) TCE Technical specification sheets duly signed & stamped

(b) Technical deviation sheet indicating No deviation / Deviations if any

(c) Makes of major bought out items

33.3 Un-priced Commercial Bid: Shall contain documents / information as below:




ISSUE

R0

(a) Duly filled, signed and stamped commercial questionnaire

(b) Commercial deviation sheet indicating No deviation / Deviations if any to tender documents like GPC, SPC, ITB.

(c) Un-priced copy of Schedule of Rates (SOR) indicating "Q" for quoted items and "NQ" for not quoted items.

33.4 Price Bid: Format for submitting prices with duly filled prices

34 SUBMISSION OF BIDS

34.1 Bidder(s) will be required to submit in their one bigger sealed cover marked as "Offer against Enquiry No. TCE.6079A-B-610-024 for Item “Cooling Water Pumps" containing the following documents in three separate sealed envelopes before the due date & time in TCE's Mumbai Office at the address

TATA Consulting Engineers Limited, Raj Plaza, Second Floor, LBS Marg, Vikhroli (W). Mumbai- 400 083 Phone: 022-6647 2111 Fax: 022-6647 2000 Contact person: Mr. N Swaminathan / Mr. Vinayak C Parab Tel: +91 22 6689 2285/ 6647 2035

34.2 Envelope 1: Technical Bid containing following documents:

(a) One set of tender document duly stamped and signed on each page.

(b) Four sets (one original + three photo copies) of Un-priced Techno -Commercial Offer.

(c) One soft copy in CD of the Techno - Commercial offer.The soft copy is only for reference and only hard copies submitted will be considered for evaluation.

34.3 Envelope 2: Price Bid containing following documents:

Format for Submitting Prices with duly filled prices in Original.

Each envelope shall be super scribed with the names of documents it contains.

34.4 The bidders shall ensure submission of prices without any erasures or corrections with signatures in original on the priced sheet(s) of the original bid. Bidders shall also specify total bid price, wherever applicable, in figures as well as in words.

34.0 LIQUIDATED DAMAGES

In case of delay in delivery, BPCL reserves the right to recover liquidated damages at 0.5 % of the contract value for every week of delay or part there of subject to a maximum of 5 % of the total contract value until the work is satisfactorily completed and handed over. Such damages may be deducted by BPCL from any money due to the Contractor and any further amount due from the Contractor.

35.0 ORDER OF PRECEDENCE




ISSUE

R0

The following order of precedence shall be followed in case of any conflict between various parts of the tender specifications:

Commercial and General Part

Addendum/ Corrigendum issued to tender document if any.

Instructions to Bidders

Special Purchase Conditions

General Purchase Conditions

Technical Part

Addendum/ Corrigendum issued to tender document if any.

Drawings and Data Sheets

Specification write up

Codes and Standards

The Bidder shall bring to the notice of TCE/BPCL any such variations / conflicts

between various parts of the tender and obtain approval before proceding with

such information for engineering/design.




ISSUE

R0

CUT-OUT SLIPS TO BE USED BY VENDORS FOR PASTING ON COVER / ENVELOPES CONTAINING BIDS

COVER 1 CONTAINS

1. Sealed envelope no. 1: Containing four sets “Technical Bid” and “Un-priced Commercial Bid” and Documents related to Bid Qualification Criteria.

2. Sealed envelope no. 2: Containing Original Priced bid

Client: BHARAT PETROLEUM CORPORATION LTD

PMC: TATA CONSULTING ENGINEERS LIMITED.

Project: Offsites & Utilities for NHT/CCR Units at BPCL Mahul Refinery

Tender No. : -----------------------------------------------------------------------------------------

Item: ------------------------------------------------------------------------------------------------------

Bid due date & time: ---------------------------------------------------------------------------------

From:

To,

M/s TATA Consulting Engineers Limited, Raj Plaza, Second Floor, LBS Marg, Vikhroli (W). Mumbai- 400 083. Phone: 022-6647 2111 Fax: 022-6647 2000 Contact person: Mr. N Swaminathan / Mr. Vinayak C Parab

Tel: +91 22 6689 2285 / 6647 2035

(To be pasted on the sealed cover containing envelope no. 1 & envelope no. 2)




ISSUE

R0

DO NOT OPEN – THIS IS A QUOTATION

(ENVELOPE NO. 1: CONTAINS TECHNICAL & UN-PRICED COMMERCIAL BID)



Project: Offsites & Utilities for CCR & Augmentation of Refinery Power System at BPCL Mahul Refinery

Tender No. : -----------------------------------------------------------------------------------------

Item: -----------------------------------------------------------------------------------------------------

Bid due date & time: -------------------------------------------------------------------------------------

From:

(To be pasted on the envelope containing TECHNICAL & UNPRICED

COMMERCIAL BID)




ISSUE

R0

DO NOT OPEN – THIS IS A QUOTATION

(ENVELOP NO. 2: CONTAINS PRICE BID)



Project: Offsites & Utilities for CCR & Augmentation of Refinery Power System at BPCL Mahul Refinery

Tender No.: -----------------------------------------------------------------------------------------

Item: ---------------------------------------------------------------------------------------------------------

Bid due date & time: ------------------------------------------------------------------------------------

From:

(To be pasted on the envelope NO. 2 containing Format For Submitting Prices with duly filled prices)




ISSUE

R0

PROFORMA OF LETTER OF AUTHORITY FOR ATTENDING TECHNICAL BID

OPENING AND PRICE BID OPENING

Ref ............................... Date: TO, Mr. N SWAMINATHAN/ Mr. VINAYAK C PARAB TATA CONSULTING ENGINEERS LIMITED, Raj Plaza, 2nd Floor, L.B.S Marg, Vikhroli (W), Mumbai-400083 Maharashtra, INDIA Phone: 022-66472111 Phone:022-6689 2285 / 6647 2035 [email protected]/ [email protected]

Attn: Mr. N SWAMINATHAN / Mr. VINAYAK C PARAB Dear Sir, We........................................hereby authorise the following representative(s) to

attend the unpriced and priced bid opening against your Tender No.

TCE.6079A-B-610-024 1. Name & Designation......................... Signature............................ 2. Name & Designation........................Signature............................

We confirm that we shall be bound by all and whatsoever our representative (s) shall commit. Yours faithfully,

Signature............................................

Name & Designation...........................

For & on behalf of............................... NOTE:

This Letter of Authority should be on the letterhead of the bidder and should be signed by a person competent and having the power of attorney to bind the bidder.


mailto:[email protected]

mailto:[email protected]



ISSUE

R0

PROFORMA OF DECLARATION OF BLACK LISTING / HOLIDAY LISTING

In the case of a Proprietary Concern

I hereby declare that neither I in the name of my Proprietary concern M/s ....... which is submitting the accompanying Bid / Tender nor any other concern in which I am proprietor nor in any partnership firm in which I am involved as a Managing Partner have been placed on black list or holiday list declared by Bharat Petroleum Corporation Limited or Tata Consulting Engineers Limited, except as indicated below:

(Here given particulars of black listing or holiday listing and in absence thereof state "NIL").

In the case of a Partnership Firm

We hereby declare that neither we, M/s ...................... submitting the accompanying Bid / Tender nor any partner involved in the management of the said firm either in his individual capacity or as proprietor of any firm or concern have or has been placed on black list or holiday list declared by Bharat Petroleum Corporation Limited or Tata Consulting Engineers Limited, except as indicated below:


In the case of Company

We hereby declared that we have not been placed on any holiday list or black list declared by Bharat Petroleum Corporation Limited or Tata Consulting Engineers Limited, except as indicated below:


It is understood that if this declaration is found to be false in any particular, Bharat Petroleum Corporation Limited or Tata Consulting Engineers Limited, shall have the right to reject my / our bid, and, if the bid has resulted in a contract, the contract is liable to be terminated.

Place: .................. Signature of the Bidder..........

Date: .................. Name of the Signatory ..........




ISSUE

R0

INFORMATION ABOUT BIDDER (To be furnished by Bidder)

A. In case of Individual:

i) Name of business

ii) Whether his business is registered

iii) Date of commencement of business

iv) Whether he pays Income Tax over Rs. 10,000 per year

v) Whether he is a Director or is related to any Director of Owner, present

or retired within the past three years

vi) Whether he has been banned / de-listed by any Government

Department / Quasi-Government/ Public Sector Undertaking. If so,

give details.

B. In case of Partnership:

i) Names of partners

ii) Whether the partnership is registered

iii) Date of establishment of firm

iv) If each of the partners of the firm pays income Tax over Rs. 10,000 a

year and if not, which of them pays the same

v) Whether any partner or member of the firm is a Director or is related to

any Director of Owner, present or retired within the past three years

vi) Whether the firm has been banned / de-listed by any Government

Department / Quasi-Government / Public Sector Undertaking. If so,

give details.

C. In the case of Limited Company or Company Limited by Guarantees:

i) Amount of paid-up capital

ii) Name of Directors

iii) Date of Registration of Company

iv) Copies of the balance sheet of the company of the last three years

v) Whether any Director of the Company is a Director or is related to any

Director of Owner, present or retired within the past three years




ISSUE

R0

vi) Whether the company has been banned / de-listed by any Government

Department / Quasi-Government / Public Sector Undertaking. If so,

give details.

Signature of Tenderer with seal:

Name and Address of Tenderer:




ISSUE

R0

CONCURRENT COMMITMENTS (To be filled by Bidder)

I / We furnish below the details of the works currently being executed by me / us:

Sl. No.

Full particulars of similiar work carried out by tenderer

Name, address of client and contact person

Total Contract Value

Contractual Completion period (Months)

Actual Completion Period (Months)

Expected Date of Completion

Current Progress (Percen-tage)

Signature of Tenderer with seal

Name and Address of Tenderer




ISSUE

R0

SCHEDULE OF BIDDER’S EXPERIENCE (To be filled by Bidder)

The BIDDER shall indicate below a list of similar jobs executed by him, to whom a reference may be made by the PURCHASER.

Sl. N

o.

Na

me

,

Ad

dre

ss, T

el.

No

., F

ax N

o.

An

d E

-Ma

il Id

Of C

lient

An

d

Pro

ject

Nam

e

Pu

rch

ase

r

Ord

er/

Co

ntr

act

No

.

An

d D

ate

Brie

f D

eta

ils O

f

Eq

uip

me

nt/

Syste

m

Su

pp

lied

Sco

pe

Of

Se

rvic

es (S

ee

Legend)

Co

ntr

act

Price

In R

s.

Sch

ed

ule

d

Da

te O

f

Co

mp

letion

Actu

al D

ate

Of

Co

mp

letion

Re

aso

n F

or

De

lay I

n

Co

mp

letion

, If

Ap

plic

able

Re

ma

rks

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

LEGEND: E - ERECTION, S - SUPPLY, SUP - SUPERVISION OF ERECTION, TC - TESTING AND COMMISSIONING

COMPANY SEAL SIGNATURE

NAME

DESIGNATION

COMPANY

DATE

Note: PO / Contract copies, Completion Certificates attached.




ISSUE

R0

SCHEDULE OF DEVIATIONS FROM GENERAL CONDITIONS (To be filled by Bidder)

The BIDDER shall indicate below all deviations from the General Conditions:

SL. NO.

SECTION SPECIFICATION NO.

PARA NO. DEVIATION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

The Bidder hereby certifies that the above mentioned are the only deviations from the Purchaser’s/Consultant’s General Conditions for this Enquiry Document. The Bidder further confirms that in the event any other data and information presented in the Bidder’s proposal and accompanying documents including drawings and catalogues etc. are at variance with the specific requirements laid out in the Purchaser’s/Consultant’s General Conditions, the latter shall govern and shall be binding on The Bidder without any price implication.


NAME

DESIGNATION

COMPANY

DATE




ISSUE

R0

SCHEDULE OF DEVIATIONS FROM TECHNICAL SPECIFICATIONS (To be filled by the bidder)

The BIDDER shall indicate below all deviations from the Technical Specifications:

SL. NO.

SECTION SPECIFICATION NO.

PARA NO. DEVIATION

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

The Bidder hereby certifies that the above mentioned are the only deviations from the Purchaser’s/Consultant’s Technical Specifications for this Enquiry Document. The Bidder further confirms that in the event any other data and information presented in the Bidder’s proposal and accompanying documents including drawings and catalogues etc. are at variance with the specific requirements laid out in the Purchaser’s/Consultant’s Technical Specifications, the latter shall govern and shall be binding on the Bidder without any price implication.


NAME

DESIGNATION

COMPANY

DATE




ISSUE

R0

ANNUAL TURNOVER STATEMENT

The bidder shall indicate herein his annual turnover during preceding 3 years based on the audited balance sheet/profit & loss account statement.

FINANCIAL YEAR ANNUAL TURNOVER (Rs.) NET WORTH (Rs.)

FY 2010-11

FY 2009-10

FY 2008-09

NOTE:

1. Copies of audited balance sheet with Profit & Loss account statement for the last 3 years shall be enclosed along with the bid.

2. Bidder shall work out Net Worth on the following basis: Net Worth: Share Capital + Reserves & Surplus – accumulated loss (Net Worth of the bidder shall be positive for the latest audited financial year)




ISSUE

R0

CHECK LIST FOR SUBMISSION OF BID Bidder is requested to fill this check list and ensure that all details/documents have been furnished as called for in the Bidding Document along with duly filled in, signed & stamped checklist with each copy of the “Techno-Commercial bid” (Part – A)”. Please tick the box and ensure compliance: (1.0) Bid Forwarding Letter

Submitted

(2.0) Cost of the bidding document in the form of Crossed Demand Draft as mentioned in

the NIT in a separate envelope. (Applicable for the bidders who have downloaded the bidding document from BPCL/TCE website)

Submitted

(3.0) Power of Attorney in Favour of the person who has signed the bid on stamp paper of Appropriate value.

Submitted

(4.0) Submission of documents to establish conformity with Bidder’s Qualification Criteria as per ITB

Submitted

(5.0) Partnership Deed in case of partnership firm and Article of Association in case of limited

company. Submitted

(6.0) Present Commitments as per ITB.

Submitted

(7.0) Submission of Deviations from General Conditions

Submitted

(8.0) Schedule of Deviations to technical specifications and general conditions separately

Submitted

(9.0) An overall schedule for completion of work in the form of Bar Chart




ISSUE

R0

Submitted

(10.0) Technical Details/ Documents specified in Technical part

Submitted Not Applicable

(11.0) Blank copy (without price) of schedule of Price duly signed and stamped on each page Submitted (12.0) Copy of VAT registration certificate Submitted CONFIRM THE FOLLOWING

(1.0) All pages of the bid have been page numbered in

sequential manner. YES

(2.0) The bid has been submitted in requisite number of

copies as specified in Instructions to Bidders YES

(3.0) Bidding Document marked “ORIGINAL” along with Original offer,

Compliance Letter for Addendum/ Amendment, if any, along with Original offer and in copies, has been submitted duly signed and stamped on each page.

YES (4.0) Blank copy (without price) of Schedule of Prices

duly signed and stamped on each page has been submitted

YES

(5.0) Submission of complete tender document duly signed and stamped by the Bidder in

token of having received and read all the parts of the Bidding documents and having accepted and Considered the same in preparing and submitting the Bid and submission of an undertaking that no pages have been altered / changed with respect to the tender documents and all subsequent amendments.

YES




ISSUE

R0

(6.0) Submission of Quality manual.

YES

(7.0) Submission of ESIC, PAN Details, Service Tax registration certificate, Scheduled Bar chart, proposed site organization chart, Un- Priced and Priced Bid duly signed and stamped.

YES

(8.0) Submission of Integrity pact duly signed and stamped on a stamp paper of appropriate value.

YES

(9.0) Bidder is requested to fill this check list and ensure that all details/documents have been furnished as called for in the Bidding Document along with duly filled in, signed & stamped checklist

Please confirm & ensure compliance:

Description Yes / No

Envelope 1:

a) 4 Sets consisting of Technical Bids, Unpriced commercial Bids, Duly filled Questionnaire, Bid qualification criteria documents

Envelope 2:

a) Format for Submitting Prices with duly filled prices

SIGNATURE OF BIDDER: ________________________ NAME OF BIDDER: ____________________________ COMPANY SEAL: ______________________________


SPEC.NO. TATA Consulting Engineers Limited SECTION: WRITE-UP

TCE.6079A-B-610-024 SCOPE OF WORK

SHEET 1 OF 2 OF 4

ISSUE

R0

SCOPE OF WORK


SPEC.NO. TATA Consulting Engineers Limited SECTION: WRITE-UP

TCE.6079A-B-610-024 SCOPE OF WORK

SHEET 2 OF 2 OF 4

ISSUE

R0

SCOPE OF WORK

1 GENERAL

1.1. This tender covers design, engineering, manufacturing, supply, testing and commissioning, supervisory services for erection of equipments of the in strict compliance with engineering drawings, specifications, standards, data sheets, codes, etc.

1.2 The proposed tender consist supply of Cooling water pumps & accessories as specified in datasheet.

1.3 The Contractor’s scope of work consists of the scope mentioned in the

tender, but not limited to the same. The scope of work shall also include other items/works required to complete the work in all respects as per specifications, drawings and instructions of Engineer-in-Charge whether specifically mentioned or not in the tender document.

1.4 It is not the intent to specify completely herein all details of design and construction of equipment or materials to be supplied or of services to be rendered. However, the equipment, materials and services shall conform in all respects to high standards of engineering design, workmanship and be capable of performing in continuous commercial operation in a manner acceptable to Purchaser who will interpret the meaning of drawings and specifications and shall have the power to reject any work or material which in his judgement are not in full accordance therewith.


SPEC.NO. TATA CONSULTING ENGINEERS LIMITED SECTION: WRITE-UP

TCE.6079A-B-610-024 SCOPE OF SUPPLY

SHEET 1 OF 3 OF 4

ISSUE

R0

SCOPE OF SUPPLY




SHEET 2 OF 3 OF 4

ISSUE

R0

SCOPE OF SUPPLY

1. OWNER’S SCOPE

Erection of cooling water pumps including accessories shall be carried out by others.

Detail Engineering and construction of all foundations for Cooling Water pumps shall be carried out by others based on the engineering inputs received from the bidder.

2. BIDDER’S SCOPE OF SUPPLY

2.1 This tender covers technical specifications of design, engineering, manufacturing, testing and commissioning, supervisory services for erection of equipments of the Cooling water pumps for Bharat Petroleum Corporation Limited (BPCL), Mumbai.

2.2 The equipment to be supplied under this specification shall be in accordance with the relevant Sections and Datasheets. Any item which may not have been specifically mentioned herein but are needed to complete the equipment / system shall also be treated as included and the same shall also be furnished, unless otherwise specifically excluded as indicated.

2.3 The Bidder’s scope shall include the following:

2.3.1 Cooling water pumps

(a) Two (2) number Motor driven Centrifugal pumps of 3,920 m3/hr @ 51 MLC capacity with accessories.

(b) One (1) number Steam Turbine driven Centrifugal pump of 3,920 m3/hr @ 51 MLC capacity with accessories.

2.3.2 Electrical equipment as per details enclosed with this specification.

2.3.3 Instruments and controls as per details enclosed with this specification.

2.3.4 First fill of all lubricants and consumables.

2.3.5 Bidder shall provide the following engineering information

(a) Preparation of P&I diagrams showing complete instrumentation & controls, line sizes, pipe material, gravity flow lines, pipe line slopes etc.

(b) Preparation of general arrangement drawings in plans & sections identifying location of all equipment in plan & elevation, their supporting base frame, operation & maintenance area etc.

(c) Providing details of load foundation requirement etc for carrying out the required civil works, details of any modification required in civil structures.

(d) Supply of engineering information for interface points with power cabling.

(e) Operation philosophy and control logic for instrumentation and controls.




SHEET 3 OF 3 OF 4

ISSUE

R0

2.3.6 Base plates, foundation bolts, nuts and washers etc. required for each equipment.

2.3.7 Counter flanges with bolts, nuts, washers and gaskets for all equipment at all terminal points of equipment covered under Contractor’s scope of supply.

2.3.8 Quality Assurance Plan (QAP) for all items/equipment to be manufactured/ fabricated and bought out items/equipment to be supplied by sub bidders.

2.3.9 Inspection at bidder’s works.

2.3.10 HAZOP study required for the plant shall be done by Bidder at TCE/BPCL Mumbai office along with BPCL and their representatives. Bidder shall submit a HAZOP report after HAZOP study. Any modifications to the system arising out of HAZOP study shall be suitably incorporated and implemented by the Vendor without any additional compensation.

2.3.11 Bidder shall note that the Cooling water pumps are located in Zone 2.

2.3.12 Arranging stage and final inspection from TCE/BPCL and obtain material dispatch clearance.

2.3.13 Packing, handling and transportation to site.

2.3.14 Supervision of Erection and commissioning of all systems/equipment.

2.3.15 One set of commissioning and start – up spares.

2.3.16 Mandatory spares (essential spares) as listed elsewhere in the document.

2.3.17 One set of recommended spares for 2 years of trouble free operation. (Contractor shall list the recommended spares and furnish the unit rates separately)

2.3.18 One set of recommended maintenance tools and tackles. (Contractor shall list the same and furnish the unit rates separately)

2.3.19 Supervision of commissioning, Trial Run, Reliability run and performance guarantee tests for the plant and equipment.

2.3.20 All consumables till the equipment is handed over to the Purchaser. Instruments and equipment required for the testing, commissioning and performance test should be arranged by bidder.

2.3.21 Training of BPCL’s personnel including O&M staff as specified or required at bidders’ facilities.

2.3.22 Hydrostatic testing of all equipment/items/piping as specified elsewhere in the specification/ as necessary.

2.3.23 Statutory approvals required for the equipment.

2.3.24 Submission of documentation such as:

(a) Operation & Maintenance manual

(b) Records of inspection carried out at Bidder’s/Sub bidder’s works.

2.3.25 Drawings in hard copies and soft copies.

2.3.26 Preparing as Build drawing for Cooling water pumps shall be by the BIDDER.



TCE.6079A-B-610-024 TIME SCHEDULE

SHEET 1 OF 2 OF 4

ISSUE

R0

TIME SCHEDULE



TCE.6079A-B-610-024 TIME SCHEDULE

SHEET 2 OF 2 OF 4

ISSUE

R0

1. The entire work, as per scope and provisions of this tender shall be completed within 09 months on FOT site basis from the date of issue of Letter of Intent / Award of Contract for Domestic Bidders on site basis and 08 months from the date of issue of Letter of Intent / Award of Contract for Foreign Bidders on FOB port of exit basis. No deviation in this regard shall be entertained. Bidders submitting offers not complying with the schedule requirements are liable to be summarily rejected.

2. The Bidder shall adhere to the following schedule for submission of data / drawings / documents from the date of issue of LOI. Bidder shall also refer to engineering scope for list of deliverables to be submitted for equipment.

Details Weeks after award of

contract / LOI

Bar chart 1 week

P&I diagram 2 weeks

Equipment GA and cross section drawings, Foundation details, Performance curves

4 weeks

I&C Drawings / Documents 2 to 6 weeks

Electrical Dwgs. 6 weeks

Piping layout 6 weeks

O & M manual 12 weeks

As-built Drawings / Documents After completion of work

3. The bidder shall adhere to the following schedule for delivery of equipment & material and completion of the project:

Details Months after award of

contract / LOI

Delivery of material / equipment for Domestic Bidders on FOT site basis

09

Delivery of material / equipment for Foreign Bidders on FOB port of exit basis

08

4. The time indicated is for completing all the Work in all respects as per specifications, codes, drawings, the provisions of the Bidding Document, and instructions of Engineer-in-Charge.



TCE.6079A-B-610-024 TERMS OF PAYMENT

SHEET 1 OF 3 OF 4

ISSUE

R0

TERMS OF PAYMENT




SHEET 2 OF 3 OF 4

ISSUE

R0

2.0 TERMS OF PAYMENTS

2.1 5% against approval of following documents in Code A along with BG of equivalent amount valid for 3 months from date of agreed delivery date.

(Refer Attachment I for details on vendor document review status).

- Cooling Water Pump data sheets - Motor Data sheets - Turbine Data sheets - Foundation details - Piping & Instrumentation Diagram 2.2 5% against order placement of Motor, Turbine along with copy of un-

priced Purchase orders and BG of equivalent amount valid for 3 months from date of agreed delivery date.

2.3 5% against reciept of Motor, Turbine at vendor’s works along with BG

of equivalent amount valid for 3 months from date of agreed delivery date.

2.4 75% within 30 days after receipt of equipment and submission of all

documents as per tender document for domestic bidders Or

75% against an irrevocable letter of credit against submission of dispatch documents as per General Purchase Conditions for imported equipment / materials for foreign bidders.

2.5 Performance guarantee test – 10% of total lumpsum value

- After Completion of PG Test and as certified by Engineer-in-charge.

- Submission of all documents as required and

- Submission of 2 Nos. Performance Bank Guarantees equivalent to 10% of

Total contract value each valid for a period of 18 months from the date of last

supply or 12 months from the date of commissioning whichever is earlier. If

Performance Guarantee test is not conducted within 120 days from the date

of last supply for the reasons not attributable to the vendor, 10% Payment

shall be released against submission of Bank guarantees as mentioned

above.

NOTE:

Billing schedule shall be mutually agreed between Vendor and TCE/BPCL after award of contract.




SHEET 3 OF 3 OF 4

ISSUE

R0

ATTACHMENT-I (TO BE READ WITH PARA 2.1 OF TERMS OF PAYMENT)

VENDOR DOCUMENT REVIEW STATUS CODES FORMAT FOR STAMP AND STICKER

TATA Consulting Engineers Limited

VENDOR DOCUMENT REVIEW STATUS

□ A Document approved as submitted; proceed with fabrication/ construction.

□ B Document approved subject to comments noted; proceed with fabrication/construction considering our comments.

□ C Our comments are noted on this marked-up print.

□ D Our comments are noted in the memo attached to the letter of transmittal No. TCE.................................... dated......................

□ E Correct original of this document to reflect our comments and resubmit for approval.

□ F Correct original of this document to reflect our comments and resubmit for records.

□ G Documents of this category are for information only and not for approval. Information furnished on the document is noted.

□ H Document reviewed against our previous comments and other revisions highlighted and identified by the vendor.

□ I Document returned without review.

Approval conveyed herein neither relieves Vendor/Contractor of his contractual obligations and his responsibilities for correctness of dimensions, materials of construction, weights, quantities, design details, assembly fits, system/performance requirements and conformity of supplies with Indian statutory Laws as may be applicable, nor does it limit the Purchaser’s rights under the contract.

Reviewed by : ……………………………………………

Date : ………………………..

********



TCE.6079A-B-610-024 QUALITY MANAGEMENT SYSTEM

SHEET 1 OF 6 OF 4

ISSUE

R0

BIDDER’S QUALITY MANAGEMENT SYSTEM

REQUIREMENTS




SHEET 2 OF 6 OF 4

ISSUE

R0

1.0 INTRODUCTION

This specification establishes the Quality Management System requirements to be met by BIDDER. In case of any conflict between this specification and other provisions of the tender document / MR / PR, the same shall be brought to the notice of BPCL, at the stage of bidding and shall be resolved with BPCL, prior to the placement of order.

2.0 DEFINITION

2.1 BIDDER

For the purpose of this specification, the word “BIDDER” means the person(s), firm, company or organization who is under the process of being contracted by BPCL for delivery of some products (including service). The word is considered synonymous to supplier, contractor or vendor.

2.2 PROJECT QUALITY PLAN

Document tailored from Standard Quality Management System Manual of BIDDER, specifying how the quality requirements of the project will be met.

2.3 OWNER

Owner means the owner of the project for which services / products are being purchased and includes their representatives, successors and assignees.

3.0 REFERENCE DOCUMENTS

ISO:9001-2000 (Quality Management Systems - Requirements)

ISO:9004-2000 (Quality Management Systems - Guidelines for Performance Improvements)

ISO:9000-2005 (Quality Management Systems - Fundamentals and Vocabulary)

4.0 QUALITY MANAGEMENT SYSTEM – GENERAL

Unless otherwise agreed with BPCL, the BIDDER proposed quality system shall fully satisfy all the elements of ISO 9001 – 2000 “Quality Management Systems – Requirements.” Evidence of compliance shall be current certificate of quality system registration to ISO 9001 or a recent compliance audit recommending registration from a Registrar acceptable to BPCL. The quality system shall provide for the planned and systematic control of all quality related activities for execution of contract. Implementation of the system shall be in accordance with BIDDER’S Quality Manual and PROJECT specific Quality Plan, which shall both, together with all related/referred procedures, be submitted to BPCL for review, comment and approval.

5.0 QUALITY SYSTEM REQUIREMENTS

5.1 BIDDER shall ensure that the responsible authority for execution of the order / contract has communicated the P0/ contract requirements including any




SHEET 3 OF 6 OF 4

ISSUE

R0

identified or intended statutory and regulatory requirements to all concerned in sub-contractor’s organization who are contributing to the execution of the PO/ contract.

5.2 BIDDER shall establish a documented Quality Policy and Quality Objectives to achieve the specified and intended requirement of purchase order / contract.

5.3 BIDDER shall identify and communicate the responsibilities and authorities of the personnel contributing to the execution of the order / contract.

5.4 BIDDER shall deploy competent and trained personnel for various activities for fulfillment of PO / contract. BIDDER shall arrange adequate infrastructure and work environment to ensure that the specification and quality of the deliverable are maintained.

5.5 BIDDER shall do the quality planning for all activities involved in delivery of order. The quality planning shall cover as minimum the following:

• Resources

• Product / deliverable characteristics to be controlled.

• Process characteristics to ensure the identified product characteristics are realized

• Identification of any measurement requirements, acceptance criteria

• Records to be generated

• Need for any documented procedure.

5.6 Requirements for sub-contracting / purchasing of services specified in contract / tender shall be adhered to. Wherever requirements are not specified, the sub-contractor shall establish and maintain a system for purchasing / sub-contracting to ensure that purchased product / service conforms to specified requirements. Criteria for selection of sub-contractor, evaluation, re-evaluation, maintenance of purchasing data and verification of purchased product (sub-contractor services), constitute important components of this requirement.

5.7 BIDDER shall plan and carry production and service provision under controlled conditions. Controlled conditions shall include, as applicable

a) The availability of information that describes the characteristics of the product

b) The availability of work instructions

c) The use of suitable equipment

d) The availability and use of monitoring and measuring devices

e) The implementation of monitoring and measurement




SHEET 4 OF 6 OF 4

ISSUE

R0

f) The implementation of release, delivery and post delivery activities.

5.8 BIDDER shall validate any processes for production and service provision where resulting output cannot be verified by subsequent monitoring and measurement. This includes any process where deficiencies become apparent only after the product is in use or service has been delivered.

5.9 BIDDER shall establish a system for identification and traceability of product / deliverable throughout product realization. Product status with respect to inspection and testing requirements shall be identified.

5.10 BIDDER shall identify, verify, protect and safeguard Owner property (material / document) provided for use or incorporation into the product. If any Owner property is lost, damaged or otherwise found to be unsuitable for use, this shall be reported to the Owner.

5.11 BIDDER shall preserve the conformity of product / deliverable during internal processing and delivery to the intended destination. Requirements mentioned in the tender shall be adhered to.

5.12 BIDDER shall establish system to ensure that inspection and testing activities are carried out in a manner that is consistent with the inspection and testing requirements. Where necessary, measuring equipments shall be calibrated at specified frequency, against national or international measurement standards; where no such standard exists, the basis used for calibration shall be recorded. The measuring equipments shall be adjusted or re-adjusted as necessary, identified to enable the calibration status to be determined. The measuring equipments shall be protected from damage during handling, maintenance and storage.

5.13 BIDDER shall ensure effective monitoring, using suitable methods, of the processes involved in production and other related processes for delivery of the scope of contract.

5.14 BIDDER shall monitor and measure the characteristics of the product deliverable to verify that product requirement has been met. The inspection (stage as well as final) by BIDDER and Owner personnel shall be carried out strictly as per the ITPs forming part of the contract. Product release or service delivery shall not proceed until the planned arrangements have been satisfactorily completed, unless otherwise approved by relevant authority and where applicable by Owner.

5.15 BIDDER shall establish and maintain a documented procedure to ensure that the product which does not conform to requirements is identified and controlled to prevent its unintended use or delivery

5.16 All non-conformities (NCs) / deficiencies found by the BIDDER’S inspection / surveillance staff shall be duly recorded, including their disposal action shall be recorded and resolved suitably. Effective corrective and preventive action shall be implemented by the BIDDER so that similar NCs including deficiencies do not recur.




SHEET 5 OF 6 OF 4

ISSUE

R0

5.17 All deficiencies noticed and reported by Owner shall be analyzed by the BIDDER and appropriate corrective and preventive actions shall be implemented. BIDDER shall intimate Owner of all such corrective and preventive action implemented by him.

5.18 BIDDER shall have documented procedure for control of documents and it shall be submitted for Owner comments.

5.19 All project records shall be carefully kept, maintained and protected for any damage or loss until the project completion, then handed over to Owner as per contract requirement, or disposed as per relevant project procedure.

6.0 AUDITS

BIDDER shall plan and carry out the QMS audit for the job. Quality audit programme shall be for systematic audit and surveillance of detailed design, procurement, construction management and commissioning, vendor and sub-contractors (as applicable). This shall be additional to the certification body surveillance audits carried out under BIDDER’S own ISO 9001 certification schemes. The audit programmes and audit reports shall be submitted to OWNER /TCE as per BIDDER’S documentation requirement matrix. TCE or OWNER’S representative reserves the right to attend, as a witness, any audit conducted during the execution of the WORKS. In addition TCE / Owner appointed third party may also perform a program of Quality and Technical compliance audits. BIDDER shall provide assistance and access to their systems and sub-contractor / vendor systems as required. Any deficiencies noted shall be immediately rectified by BIDDER.

7.0 PROJECT QUALITY PLAN REQUIREMENTS BIDDER shall prepare and submit Project Quality Plan for review and approval. The BIDDER’S quality Plan shall address all of the applicable elements of ISO 9001, identify responsible parties within BIDDER’S organization, for the implementation / control of each area, reference the applicable procedures used to control / assure each area, and verify the documents produced for each area. The Project Quality Plan shall necessarily define control or make reference to the relevant procedures, for design and engineering, purchase, documentation record control, bid evaluation, inspection, quality control at contractor / sub-contractors, preservation, packaging and storage, quality control at contruction site, pre-commissioning, commissioning and handing over (as applicable) in line with contract requirement and scope of work.

8.0 DOCUMENTATION REQUIREMENTS The required QMS documents specified in BIDDER’S documentation requirements matrix shall be submitted for review / approval by TCE / Owner otherwise work shall not be allowed to continue. BIDDER’S DOCUMENTATION REQUIREMENTS MATRIX




SHEET 6 OF 6 OF 4

ISSUE

R0

Sr. No.

Document To Be Submitted No. of Copies

At Bid Stage After Award of Job

1. Quality Manual 04

2. CVs of the personnel in BIDDER’S QA Organogram

03

3. Certificate of approval for compliance to ISO:9001 standard

02

4. Organization chart

a) for complete organization

b) for the project

04

04

5. Procedure for Control of Non-conforming Product

04

6. Procedure for Control of Documents

04

7. Sample audit report of the QMS internal and external audits conducted during last one year.

03

8. Project Quality Plan 04

9. Customer satisfaction reports from at least 2 customers, during the last five years.

03

10. Audit program for the project 03

11. a) project audit report

b) corrective action report on the project audits

As per

audit plan

03

03

12. Technical audit reports for the project

As per

audit plan

03



TCE.6079A-B-640-001 GENERAL PURCHASE CONDITIONS – INDIGENOUS

MATERIAL & EQUIPMENT

SHEET 1 OF 9 OF 4

ISSUE R0

GENERAL PURCHASE CONDITIONS

INDIGENOUS MATERIAL & EQUIPMENT



TCE.6079A-B-640-001 COMMERCIAL QUESTIONNAIRE – IMPORTED


SHEET 1 OF 8 OF 4

ISSUE

R0

GENERAL PURCHASE CONDITIONS

IMPORTED MATERIAL & EQUIPMENT


TCE.6079A-B-610-024

TATA CONSULTING ENGINEERS LIMITED SECTION: WRITE-UP

SPECIAL PURCHASE CONDITIONS SHEET 1 OF 3

ISSUE R0

1.0 TECHNICAL AND COMMERCIAL LOADING

1.1 BASIS OF LOADING

The Foreign Bids shall be loaded on FOB Port of Exit prices and the Indian Bids shall be loaded on FOT Dispatch point basis.

1.2 TECHNICAL LOADING:

Technical loading, cost loading in respect of utilities etc., if applicable shall be considered as stipulated in technical specifications.

1.3 COMMERCIAL LOADING:

1.3.1 Differential Payment Terms

Any differential payment terms offered by a supplier as against the terms specified in the SPC shall be loaded @ 14% simple interest per annum for the applicable period.

Deviation to Performance Bank Guarantee (PBG) clause:

Performance Bank Guarantee by vendors (for 10% of order value) shall be furnished. However, for order value upto Rs. 10.00 lakh, PBG will not be applicable. In case a supplier offers to give a PBG for less than 10% of order value, or for a lesser period than what is provided in GPC / SPC / ITB loading shall be done for the differential amount and/ or the differential period.

For differential period/ amount loading, the following example will amplify the methodology (if GPC / SPC / ITB specifies 10% PBG/CPBG for 18 months):

For differential period:

10% for 18 months - No loading

10% for 12 months - 10% x 6/18 =3.3%

10% for 6 months - 10% x 12/18 = 6.7%

No PBG - 10%

In case of Differential Amount

Amount Offered by Bidder Loading

10% Nil

Less than 10% Differential between the offered percentage and 10%

1.3.2 Delayed Delivery:

1.3.2.1 In case a vendor does not accept the price reduction clause or takes exception to the percentage rate, loading shall be done to the extent of maximum of 5% of the order value or the differential percentage not agreed by the vendor.

1.3.2.2 In case vendor takes an exception that price reduction in case of delayed delivery should be restricted to 5% of delayed portion only and not on total order value, then price loading @ 5% shall be done.


TCE.6079A-B-610-024



ISSUE R0

2.0 COMMERCIAL BID EVALUATION

2.1.1 Where only Indian Bids are under comparison

Bids shall be evaluated on the basis of net effective price i.e. landed cost at Site

including third party inspection charges (if applicable) by third party inspection

agency as nominated by BPCL minus CENVAT / Set off benefit available to BPCL.

2.1.2 Where only Foreign Bids are under comparison

Bids shall be evaluated on CIF port of exit basis including third party inspection

charges (if applicable) considering ocean freight and marine insurance as 6% of FOB

price for Europe/Japan/Asia and 9% of FOB price for Australia / American continent.

In case of pipes where ever the supplier has not indicated stowage charges, 0.6%

shall be loaded on the FOB price. CENVAT / Set off benefit available to BPCL shall

be considered during price evaluation.

2.1.3 Where Indian as well as Foreign Bids are under comparison

Domestic Bidders

Bids shall be evaluated on the basis of net effective price i.e. landed cost at Site

including third party inspection charges (if applicable) by third party inspection

agency as nominated by BPCL minus CENVAT / Set off benefit available to BPCL.

Foreign Bidders

Bids shall be evaluated on the basis of landed cost at Site including third party

inspection charges by third party inspection agency (nominated by BPCL/TCE).

(a) F.O.B. price quoted by the bidder (including stowage charges in case of

pipes)

(b) Ocean freight and marine insurance as under:

(i) Europe / Japan / Asia : 6% of FOB price

(ii) Australia / American Continent : 9% of FOB price

(c) Prevailing rate of Customs duty calculated with Landing Charges @ 1% of

CIF Value

(d) Port handling charges @ 2% of FOB value

(e) Inland freight charges from Mumbai port (India) to project site(s) @2% of

landed cost, i.e., sl.no. (a) to (e)

CENVAT / Set off benefit available to BPCL shall be considered during price evaluation.

3.0 DEVIATIONS IN TECHNICAL UNPRICED BID:

(a) Any deviations taken by the supplier shall be brought out strictly in the formats given in ITB and enclosed with Technical Unpriced Bid.


TCE.6079A-B-610-024



ISSUE R0

(b) Any deviations not brought out in the prescribed formats given in ITB and mentioned elsewhere in the bid shall not be recognized and the same shall be treated as null and void.

(c) Supplier’s own terms and conditions, if any, mentioned elsewhere in the bid shall be recognized and the same shall be treated as null and void.

(d) Bidders are requested to note that deviations, if any, taken against Tender commercial terms & conditions, shall result in either loading of prices or rejection of the offer.


TCE.6079A-B- TATA CONSULTING ENGINEERS LIMITED SECTION : 610-024 LOADING AND PENALTY CRITERIA FOR

COOLING WATER PUMPS

SHEET 1 OF 2

ISSUE R0

1.0 COST LOADING / PENALTY TOWARDS TECHNICAL PARAMETERS (UTILITIES ETC.)

1.1 Loading Criteria:

1.2 Equipments that are continuously running (24hrs/day operation) only are considered

for loading.

1.3 Only operating equipment are considered for loading. Standby equipment are not considered for loading. However, during shop testing, even the standby equipment shall meet the guaranteed power / steam consumption figures quoted by the bidder.

1.4 Bidder shall furnish the guaranteed values for BKW of motor driven pump as well as guaranteed values for steam consumption of Turbine driven pump including all losses with zero percent tolerance including errors in instruments and measurements at the guaranteed (certified) point specified in the data sheet.

1.5 Total cost for evaluation purpose = A+B+C Where, A - Capital cost of the Pump assembly B - Cost of Mandatory spares C - Operating Cost as detailed below

1.6 Loading for Operating Cost for Motor driven Pump: Loading for operating cost will be arrived at comparing the guaranteed power consumption by all the technically acceptable bidders. All bidders will be loaded to the extent of their respective power consumption figures. The Operating cost is then arrived at as given below: C (in Rs.) = (BKWE) x Cp x 8000 x DF Where, C = Operating Cost in Rupees. BKWE = Guaranteed Shaft Power in kW quoted by the bidder

under evaluation. Cp = Cost of Energy (Refer Design basis)

DF = Discounting Factor = 5

1.7 Loading for Operating Cost for Turbine driven Pump: Loading for Operating cost will be arrived at comparing the guaranteed steam consumption by all the technically acceptable bidders. All bidders will be loaded to the extent of respective steam consumption figures. The Operating cost is then arrived at as given below: C (in Rs.) = (SCE) x CS x 8000 x DF Where,


TCE.6079A-B- TATA CONSULTING ENGINEERS LIMITED SECTION : 610-024 LOADING AND PENALTY CRITERIA FOR

COOLING WATER PUMPS

SHEET 2 OF 2

ISSUE R0

C = Differential Operating Cost in Rupees. SCE = Guaranteed steam consumption in TPH quoted by the bidder under

evaluation.

CS = Difference of MP & LP steam cost (Refer Design basis)

DF = Discounting Factor = 5

1.8 Rejection Criteria:

During performances tests, in case the BKW consumed by the pump exceeds the stipulated guarantee value by more than 4%, the pump along with drive shall be rejected.



TCE.6079A-B-610-024 LIST OF APPROVED MAKES / VENDORS

SHEET 1 OF 59 OF 4

ISSUE

R0

PIPING

1. PIPES ERW CS

1.1. JINDAL PIPES LTD., MUMBAI

1.2. MAHARASHTRA SEAMLESS LTD., MUMBAI

1.3. RATNAMANI METALS & TUBES LTD., AHMEDABAD

1.4. WELSPUN GUJARAT STAHL ROHREN LTD., MUMBAI

1.5. ISMT LIMITED, PUNE

1.6. SURINDRA ENGINEERING CO. PVT. LTD., MUMBAI

1.7. LALIT PIPES

1.8. EUROTUBE LTD., ITALY

1.9. ESCO LTD., JAPAN

1.10. VALLOUREC & MANNESHMAN

1.11. TENARIS ( DALMINE, TAMSA, SIDERCA, SILCOTUB)

1.12. JFE STEEL CORPORATION GERMANY

1.13. SUMITOMO PIPE CO & TUBE CO. LIMITED.

1.14. BENTLER AG

2. PIPES EFW CS

2.1. JINDAL SAW LTD. (FORMERLY SAW PIPES LTD), MUMBAI

2.2. LALIT PROFILES & STEEL INDUSTRIES LTD., NAVI MUMBAI

2.3. PSL LIMITED, MUMBAI


2.5. SURINDRA ENGINEERING CO. PVT. LTD., MUMBAI

2.6. WELSPUN GUJARAT STAHL ROHREN LTD., MUMBAI

2.7. MAN INDUSTRIES

2.8. MUKAT PIPES

2.9. LALIT PIPES





2.14. VALLOUREC & MANNESHMAN


3. PIPES SEAMLESS CS

3.1. DALMINE S.P.A., ITALY (ONLY FOR 16” AND ABOVE SIZE)

3.2. HORST KURVERS GMBH, GERMANY (ONLY FOR 16” AND ABOVE SIZE)

3.3. INOXTECH S.P.A, ITALY (ONLY FOR 16” AND ABOVE SIZE)




3.7. TUBOS REUNIDOS, S.A., SPAIN (ONLY FOR 16” AND ABOVE SIZE)




SHEET 2 OF 59 OF 4

ISSUE

R0

3.8. VAN LEEUWEN BUIZEN, BELGIUM (ONLY FOR 16” AND ABOVE SIZE)



3.11. BHARAT HEAVY ELECTRCAL LTD.




3.15. RATNADEEP METAL & TUBES PVT. LTD

4. PIPES SS SEAMLESS & WELDED

4.1. HORST KURVERS GMBH, GERMANY

4.2. INOXTECH S.P.A, ITALY



4.5. SANDVIK ASIA LTD., PUNE

4.6. VAN LEEUWEN BUIZEN, BELGIUM

4.7. PEERAJ GENERAL TRADING CO.LLC

4.8. IGAWARA TRADING, SINGAPORE

4.9. METAL INDIA

4.10. P. B. METAL CORPORATION

4.11. KWALITY TUBES

4.12. ARISTO METAL INDUSTRIES



4.15. RAJENDRA MECHANICAL INDUSTRIES LTD (FOR SS/ AL SEAMLESS & WELDED)

4.16. PRAKASH STEELAGE LTD, SILVASA (FOR SS WELDED)


4.18. RATNADEEP METAL & TUBES PVT.LTD.

5. PIPES ALLOY STEEL(SEAMLESS)






5.6. JINDAL PIPES LTD.

5.7. PEERAJ GENERAL TRADING CO.LLC


5.9. ARISTO METAL INDUSTRIES

5.10. ARDH METAL AGENCIES

5.11. KWALITY TUBES




SHEET 3 OF 59 OF 4

ISSUE

R0



5.14. BENTLER AG

5.15. SANDVIK ASIA LTD., PUNE

6. PIPES - CPVC

6.1. ASTRAL POLYTECHNIK LIMITED

6.2. GEORG FISCHER PIPING SYSTEMS PVT LIMITED

7. BARE TUBES

7.1. HEAVY METALS AND TUBES MUMBAI

7.2. SAINEST TUBES AHMEDABAD

7.3. RATNADEEP METALS AND TUBES, KHETWADI LANE, MUMBAI

7.4. SHIN HAN METAL

7.5. SALZGITTER MANNESMANN

7.6. RATHGIBSON, INC

7.7. RONCONI

7.8. VALLOUREC PRECISION

7.9. RATHGIBSON, INC

7.10. RAJENDRA MECHANICAL INDUSTRIES, GOREGAON E

7.11. HART B V

7.12. DMV FRANCE

7.13. BENTELER AKTIENGESELLSCHAFT, GERMANY

7.14. DALMINE SPA, ITALY

7.15. INTERNATIONAL EXTRUDED PRODUCTS, USA

7.16. KAWASAKI STEEL CORPORATION, JAPAN

7.17. MANNESMANN ROHRENWERKE AG

7.18. NIPPON STEEL CORPORATION, JAPAN

7.19. NKK CORPORATION, JAPAN

7.20. SUMITOMO METAL INDUSTRIES LTD., JAPAN

7.21. VALLOUREC INDUSTRIES, FRANCE

7.22. TUBOS DEACERODE. MEXICO, SA, UK

8. TUBE STUDDED

8.1. BHEL (TRICHY) INDIA

8.2. BIRAGHI S.A. France

8.3. FINTUBE LTD. PARTNERSHIP, CANADA

8.4. JORD ENGINEERS INDIA LTD., INDIA

8.5. LPA SPA, ITALY

8.6. SUMITOMO METAL INDUSTRIES LTD., JAPAN




SHEET 4 OF 59 OF 4

ISSUE

R0

9. FITTINGS WROUGHT / FORGED FITTINGS(CS/AS/SS)

9.1. EBY FASTENERS, TALOJA

9.2. GUJARAT INFRAPIPES PVT. LTD., VADODARA

9.3. TECNOFORGE S.P.A, ITALY

9.4. TEEKAY TUBES PVT.LTD., NAVI MUMBAI

9.5. TUBE PRODUCTS INCORPORATE, VADODARA


9.7. PIPEFIT ENGINEERS

9.8. SAWAN ENGINEERS

9.9. AMFORGE INDUSTRIES

9.10. FIT TECH INDUSTRIES PVT. LTD.

9.11. ECHJAY INDUSTRIES PVT. LTD. MUMBAI.(M)

9.12. PARAMOUNT FORGE, PANVEL.(M) (UPTO 1.5 INCH)

9.13. PARMAR TECHNOFORGE,PUNE(M) (UPTO 6 INCH)

9.14. ASIAN BOILER ENGINEERS,MUMBAI.9M)(PIPE FITTINGS - IBR)

9.15. RACCORTUBI

9.16. ERNE GMBH

9.17. FITTINOX, ITALY

9.18. PHOCEENNE - GENOYER S.A. FRANCE

9.19. MUNRO & MILLER FITTINGS, UK

10. INCONEL 600 / 625 PIPES, FITTINGS AND FLANGES

10.1. CORROTHERM INTERNATIONAL LTD., UK

10.2. FITTINOX, ITALY, ITALY



10.5. MANNESMANN DMV STAINLESS GMBH, GERMANY

10.6. PEERAJ GENERAL TRADING CO. LLC, U.A.E

10.7. RACCORTUBI, ITALY, ITALY

10.8. TEEKAY TUBES PVT.LTD., NAVI MUMBAI



11. FLANGE- FORGED/ PLATE (CS/AS/SS)

11.1. C.D. INDUSTRIES LTD., MUMBAI

11.2. ECHJAY INDUSTRIES LTD., RAJKOT

11.3. J.K. FORGINGS, NEW DELHI

11.4. SHREE GANESH FORGINGS LTD., MUMBAI

11.5. SANGHVI FORGING

11.6. PARAMOUNT FORGE

11.7. BRITEX ENGINEERING

11.8. FIVEBROS FORGINGS PVT. LTD.




SHEET 5 OF 59 OF 4

ISSUE

R0

11.9. FERROSTAAL AG

11.10. METALFAR PRODOTTI INDUSTRIALI S.P.A.

11.11. AMFORGE INDUSTRIES


11.13. PIPEFIT ENGINEERS PVT. LTD

11.14. PARMAR TECHNOFORGE

12. BLIND, SPACERS & SPECTACLE BLINDS

12.1. C.D. INDUSTRIES LTD., MUMBAI

12.2. ECHJAY INDUSTRIES LTD., RAJKOT

12.3. J.K. FORGINGS, NEW DELHI

12.4. SHREE GANESH FORGINGS LTD., MUMBAI

12.5. SANGHVI FORGING


12.7. BRITEX ENGINEERING

12.8. FIVEBROS FORGINGS PVT. LTD.

12.9. FERROSTAAL AG

12.10. METALFAR PRODOTTI INDUSTRIALI S.P.A.

13. VALVES-GATE,GLOBE,CHECK(CAST/FORGED)-CS/AS/SS

13.1. BDK ENGINEERING INDUSTRIES PVT.LTD., PUNE

13.2. KSB PUMPS LTD., PUNE

13.3. LARSEN & TOUBRO LTD., MUMBAI

13.4. NITON VALVE INDUSTRIES LTD., MUMBAI

13.5. OSWAL INDUSTRIES LTD, GANDHINAGAR

13.6. BHEL

13.7. TYCO VALVES & CONTROLS ITALIA SRL

13.8. VELAN, GMBH

13.9. AUTOCAP INDUSTRIES CHENNAI (0.5 INCH TO 1.5 INCH NB CLASS 800)

13.10. NSSL Limited

14. VALVE GATE(GUNMETAL/BRASS/BRONZE)

14.1. BOMBAY METAL & ALLOYS MFG. CO. PVT. LTD., MUMBAI

14.2. LEADER VALVES LTD., JALANDHAR

14.3. SANT VALVES PVT.LTD., JALANDHAR

14.4. GG VALVES PVT. LTD.

14.5. A. V. VLAVES LTD.

14.6. FLUID CONTROLS PVT. LTD.

14.7. PEMTO-VALVES INDUSTRIE ARMATUREN GMBH

14.8. TAKAMISAWA VALVE CO. LTD.




SHEET 6 OF 59 OF 4

ISSUE

R0

15. VALVES - CPVC

15.1. ASTRAL POLYTECHNIK LIMITED

15.2. GEORG FISCHER PIPING SYSTEMS PVT LIMITED

16. Y-TYPE-ANGLE STOP CHECK VALVES

16.1. B.F.E. S.P.A., ITALY

16.2. BABCOCK POWER ESPANA, SPAIN

16.3. EDWARD VOGT VALVE CO, UNITED STATES OF AMERICA

16.4. PETROL VALVES SRL, ITALY

16.5. TAKAMISAWA VALVE CO.,LTD, JAPAN

16.6. VELAN INC, CANADA

16.7. Z&J TECHNOLOGIES GMBH, GERMANY

17. VALVE CHECK(DUAL PLATE WAFER TYPE) CS


17.2. CRANE PROCESS FLOW TECHNOLOGIES, INDIA

17.3. MICROFINISH VALVES PVT. LTD.

17.4. ADVANCE VALVES PVT. LTD.

17.5. VALVES INDUSTRIES

17.6. GOODWIN INTERNATIONAL LTD., U.K.

17.7. NITON VALVES

17.8. LARSEN & TOUBRO


17.10. BPCL CATEGORY :GLOBE/GATE/CHECK VALVES - CS(A-105)

17.11. AUTOCAP INDUSTRIES.CHENNAI.(M).(1/2" TO 1.1/2" NB CLASS 800)

18. VALVE BALL FIRE SAFE(CAST CARBON STEEL)

18.1. BELGAUM AQUA VALVES PVT LTD, BELGAUM

18.2. FLOW CHEM INDUSTRIES, AHMEDABAD


18.4. MICROFINISH VALVES PVT. LTD., MUMBAI

18.5. REYNOLD VALVES LTD, MUMBAI

18.6. VIRGO ENGINEERS LTD., NAVI MUMBAI

18.7. WEIR VALVES & CONTROL UK LTD.

18.8. XOMOX INTERNATIONAL GMBH & CO.

18.9. B.D.K.ENGINEERING INDUSTRIES LTD. MUMBAI.(M)

18.10. BHARAT HEAVY ELECTRICALS LTD. TIRUCHIRAPPALLI.(M)

18.11. KSB PUMPS LTD. MUMBAI.(M)

18.12. TYCO VALVES & CONTROLS INDIA PVT. LTD. MAGHASAR.(M)

18.13. AKAY INDUSTRIES. MUMBAI.(M)

18.14. EL-O-MATIC (I) PVT.LTD.PUNE




SHEET 7 OF 59 OF 4

ISSUE

R0

19. VALVE BUTTERFLY(CARBON STEEL)


19.2. CRANE PROCESS FLOW TECHNOLOGIES (I) LTD., PUNE

19.3. INSTRUMENTATION LTD., MUMBAI


19.5. TYCO VALVES & CONTROLS INDIA PVT LTD, NAVI MUMBAI

19.6. ARMATUREN VERTRIEB ALMS GMBH


19.8. WEIR VALVES & CONTROL UK LTD.

19.9. ADVANCE VALVES PVT. LTD.NOIDA.(M)


19.11. FOURES ENGG. (I) PVT. LTD. MUMBAI.(M)

19.12. DEMBLA VALVES LTD

20. VALVE BUTTERFLY(STAINLESS STEEL)

20.1. CRANE PROCESS FLOW TECHNOLOGIES (I) LTD., PUNE




20.5. ARMATUREN VERTRIEB ALMS GMBH


20.7. ADVANCE VALVES PVT. LTD.NOIDA.(M)


20.9. FOURES ENGG. (I) PVT. LTD. MUMBAI.(M)

20.10. DEMBLA VALVES LTD

21. VALVE NEEDLE

21.1. EXCELSIOR ENGINEERING WORKS, MUMBAI

21.2. LEADER VALVES LTD., JALANDHAR

21.3. SWASTIK ENGINEERING WORKS, MUMBAI

21.4. TECHNOMATICS (I) PVT. LTD., MUMBAI

21.5. BABCOCK BORSIG ESPANA S.A.

21.6. HP VALVES OLDENZAAL BV

22. PLUG VALVES

22.1. AZ PLUG VALVES, GERMAY


22.3. BREDA ENERGIA SESTO INDUSTRIA S.P.A, ITALY

22.4. DEZURIK (INDIA) LIMITED, CHENNAI

22.5. FISHER SANMAR LTD., MUMBAI





SHEET 8 OF 59 OF 4

ISSUE

R0

23. VALVE SPECIAL CATEGORY (DIAPHRAGM VALVES)

23.1. ADAMS ARMATUREN GMBH, GERMANY

23.2. COOPER CAMERON SINGAPORE PTE LTD, SINGAPORE

23.3. GUICHON VALVES, FRANCE

23.4. L.V.F.SPA, ITALY

23.5. LAZARO ITUARTE INTERNACIONAL S.A., SPAIN

23.6. SCHUF ARMATUREN UND APPARATEBAU GMBH, GERMANY

23.7. STRAHMAN VALVES INCORPORATED, U.S.A

23.8. YARWAY CORPORATION, NEW DELHI

23.9. ZIMMERMANN & JANSEN GMBH, GERMANY

23.10. PROCON ENGINEERS, MUMBAI.(M)

23.11. COMMERCIAL RUBBER PRODUCTS.MUMBAI.(M)

23.12. SOLAR ELECTRONICS (INDIA).MUMBAI.(M)

24. GLANDLESS PISTON VALVE

24.1. CESARE BONETTI S.P.A., ITALY

24.2. SPIRAX MARSHALL LTD., PUNE

24.3. UNIKLINGER LTD., PUNE

25. MOTORISED OPERATED VALVES (FLANGED /B.W END GATE/GLOBE/CHECK VALVE C.S./S.S./A.S.)


25.2. ECONO VALVES PVT. LTD., CHENNAI



25.5. NITON VALVE INDUSTRIES LTD., MUMBAI


25.7. VALVA ITALIA

25.8. TYCO VALVES & CONTROLS ITALIA SRL

25.9. ROTORK CONTROLS (INDIA) LTD. MUMBAI.(M)

26. TILT DISC CHECK VALVES

26.1. CRISPIN VALVES, INDIA


26.3. FRUILCO, ITALY

26.4. PACIFIC VALVES, U.S.A

26.5. POYAM VALVES ( AMPO, S.COOP), SPAIN

26.6. VELAN INC, CANADA

26.7. XANIK SPECIALITY VALVES S.A.DE.C.V, MEXICO

27. SIGHT GLASS

27.1. BLISS ANAND PVT. LTD., NAVI MUMBAI




SHEET 9 OF 59 OF 4

ISSUE

R0

27.2. C-TRU PROCESS EQUIPMENTS, MUMBAI

27.3. CHEMTROL INDUSTRIES, VADODARA

27.4. LEVCON INSTRUMENTS PVT. LTD., MUMBAI

27.5. PRATOLINA INSTRUMENTS PVT. LTD., MUMBAI

27.6. SIGMA INSTRUMENTS, NEW DELHI

27.7. TELEFLO INSTRUMENT CO.PVT.LTD., MUMBAI

27.8. FIRSA S.P.A.

27.9. GARLOCK GMBH

28. FUNNEL(FABRICATED ITEMS)

28.1. APEX ENGINEERS & FABRICATORS, NAVI MUMBAI

28.2. DEVENDRA MACHINERY & FABRICATORS PVT.LTD., MUMBAI

28.3. DOLPHIN ENGINEERING ENTERPRISES, ANKLESHWAR

28.4. FABWELL ENGINEERING CORPORATION, VADODARA

28.5. FILTERATION ENGINEERS (I) PVT.LTD., MUMBAI

28.6. G.L. ENGINEERING INDUSTRIES PVT.LTD., MUMBAI

28.7. GOVIK ELECTRICALS PVT. LTD., MUMBAI

28.8. KINAM ENGINEERING INDUSTRIES, MUMBAI

28.9. SMITH INDIA, NAVI MUMBAI

28.10. SUPREME ENGINEERING WORKS, MUMBAI

29. FIRE FIGHTING SYSTEM

29.1. AGNICE FIRE PROTECTION LTD., CHENNAI

29.2. CME INDUSTRIES, MUMBAI

29.3. GUNNEBO INDIA LTD ( (FORMERLY STEELAGE INDUSTRIES), THANE

29.4. HD FIRE PROTECTION CO PVT LTD., THANE

29.5. HITEK ENGINEERING SERVICES, MUMBAI

29.6. MANSH ENGINEERS PVT. LTD., AHMEDABAD

29.7. MASTER FIRE FIGHTERS PVT. LTD., MUMBAI

29.8. NEW FIRE ENGINEERS PVT LTD, MUMBAI

29.9. RADIANT FIRE PROTECTION ENGINEERS PVT. LTD., AHMEDABAD

29.10. SUKAN EQUIPMENTS PVT. LTD., AHMEDABAD

29.11. TECHNO FIRE PROTECTION SERVICES PVT.LTD., MUMBAI

29.12. TYCO FIRE & SECURITY INDIA PVT. LTD., MUMBAI

29.13. VIJAY FIRE PROTECTION SYSTEMS LTD., MUMBAI

29.14. BPCL CATEGORY - FIRE ACCESSORIES/EQUIPMENT/EXTINGUISHERS

29.15. NEWAGE INDUSTRIES. MUMBAI.(M)

29.16. FIRE STONE INDUSTRIES. MUMBAI.(M)

29.17. KOOVERJI DEVSHI & CO. PVT. LTD. MUMBAI.(M)

29.18. KIDDE INDIA LIMITED. MUMBAI.(M)

29.19. FIRETECH EQUIPMENT & SYSTEMS PVT. LTD. MUMBAI.(M)

29.20. ZENITH FIRE SERVICES (INDIA) PVT. MUMBAI.(M)




SHEET 10 OF 59 OF 4

ISSUE

R0

29.21. KANADIA FYR FYTER PVT. LTD. MUMBAI.(M)

29.22.

29.23. FASTENERS(INDIGENOUS) (FOR CS/LTCS ONLY)

29.24. ASHCROFT INDIA PVT LTD (FORMERLY PRECISION IND.), MUMBAI

29.25. FASTENERS & ALLIED PRODUCTS PVT.LTD., HUBLI

29.26. HARDWIN FASTENERS PVT. LTD., MUMBAI

29.27. J.J. INDUSTRIES, MUMBAI

29.28. MULTI FASTENERS PVT.LTD., VADODARA

29.29. PACIFIC FORGING & FASTENERS PVT. LTD, MUMBAI

29.30. PRECISION AUTO ENGINEERS, LUDHIANA

29.31. SANDEEP ENGINEERING WORKS, MUMBAI

29.32. SUNDARAM FASTENERS, CHENNAI

29.33. SYNDICATE ENGINEERING INDUSTRIES, MUMBAI

29.34. UDEHRA FASTENERS LIMITED. LUDHIANA.(M)

29.35. BOLTMASTER (INDIA) PVT. LTD. THANE.(M)

29.36. FIX FIT FASTENERS MFG PVT. LTD. CALCUTTA.(M)

29.37. MEGA ENGINEERING PVT. LTD. NAVI MUMBAI.(M)

29.38. F.E.DARUKHANAWALA

29.39. BPCL CATEGORY - SS BOLTS / STUDS / NUTS

29.40. GUPTA WORKSHOP. MUMBAI.(M)

29.41. KUNDAN ENGINEERING WORKS. MUMBAI.(M)

29.42. UDEHRA FASTENERS LIMITED. LUDHIANA.(M)

30. FASTENERS(IMPORTED) (FOR AS ONLY)

30.1. BECK CRESPEL, FRANCE

30.2. KADDAS OILFIELD SERVICES & TRADING COMPANY LLC, U.A.E

30.3. MEZON TECHNICAL TRADING L.L.C., U.A.E

30.4. OME METALLURGICA ERBESE S.R.L, ITALY

30.5. PEERAJ GENERAL TRADING CO. LLC, U.A.E

30.6. PROSPER ENGINEERING LTD, UNITED KINGDOM

30.7. ROLLSTUD LTD, UNITED KINGDOM

30.8. SANWA BYORA SEISAKUSYO CO LTD, JAPAN

30.9. STAINLESS STEEL FASTENERS LTD, ENGLAND

31. GASKETS (ASBESTOS/ ASBESTOS FREE / RUBBER / PTFE /ELASTOMER / SPIRAL WOUND / JACKETED / METALLIC)

31.1. CHAMPION JOINTINGS PVT.LTD., MUMBAI

31.2. IGP ENGINEERS LTD., CHENNAI

31.3. MADRAS INDUSTRIAL PRODUCTS, CHENNAI

31.4. STARFLEX SEALING INDIA PVT. LTD. (FLEXITALLIC), MUMBAI

31.5. UNIQUE INDUSTRIAL PACKINGS, MUMBAI

31.6. UNIKLINGER LTD., PUNE

31.7. VIRCAP SEALINGTECH PVT. LTD., CHENNAI

31.8. EUROGUARCO S.P.A.

31.9. KEMPCHEN & CO.




SHEET 11 OF 59 OF 4

ISSUE

R0

BPCL CATEGORY – CAF GASKET

31.10. SEIMAR ENGINEERING PVT. LTD.MUMBAI..(M)

31.11. SUPER GASKET INDUSTRIES.MUMBAI.(M)

31.12. UNITED ENTERPRISES.MUMBAI.(M)

31.13. HINDUSTAN COMPOSITES LTD.MUMBAI.(M)

BPCL CATEGORY – (CORRU GASKET, SOFT STEEL,SS,CU)

31.14. PACKINGS & JOINTINGS GASKETS P.LTD. CHENNAI.(M)

31.15. SPIRASEAL GASKETS PRIVATE LIMITED. MADRAS.(M)

31.16. BPCL CATEGORY – (JACKETTED GASKETS NON FERROUS)

31.17. GOODRICH GASKET PRIVATE LIMITED.CHENNAI.(M)

31.18. PACKINGS & JOINTINGS GASKETS P.LTD. CHENNAI.(M)

31.19. SPIRASEAL GASKETS PRIVATE LIMITED.MADRAS.(M)

31.20. SUPER GASKET INDUSTRIES.MUMBAI.(M)

31.21. BPCL CATEGORY – (SPIRAL WOUND METALLIC GASKETS)

31.22. PACKINGS & JOINTINGS GASKETS P.LTD .CHENNAI.(M)

31.23. SPIRASEAL GASKETS PRIVATE LIMITED. MADRAS.(M)

31.24. TEEKAY METAFLEX PVT. LTD. MUMBAI.(M)

32. HOSE RUBBER / METALLIC

32.1. ASHIT SALES CORPORATION

32.2. GAYTRI INDUSTRIAL CORPORATION, MUMBAI

32.3. INDIA FLEX INDUSTRIES PVT. LTD.

32.4. ROYAL INDIA CORPORATION, MUMBAI

32.5. SONI RUBBER PRODUCTS LTD, KOLKATA

32.6. SRIDHAR ENGINEERING AND RUBBER PROCDUCTS PVT LTD, VIJAYAWADA

32.7. UNIQUE RUBBER UDYOG, FARIDABAD

32.8. ABC SYNTHETICS PVT. LTD.

32.9. HYDROFLEX (INDIA)

32.10. PARKER MARKWEL INDUSTRIES PVT. LTD

32.11. BENGAL INDUSTRIES

32.12. SENIOR INDIA PRIVATE LIMITED.

32.13. MADRAS HYDRAULIC HOSES (P) LTD.

BPCL CATEGORY (HOSES - FIRE SERVICES)

32.14. INDIAN RAYON AND INDUSTRIES LTD..(M)

32.15. NEW AGE HOSE MANUFACTURING CO..(M)

32.16. CHHATARIYA FIRETECH INDUSTRIES.(M)

32.17. ZENITH FIRE SERVICES (INDIA) PVT.(M)

32.18. RM APPLIED ENG.

33. SPRING SUPPORTS

33.1. PIPE HANGERS AND SUPPORTS PVT. LTD., CHENNAI

33.2. PIPING & ENERGY PRODUCTS PVT. LTD., NEW DELHI




SHEET 12 OF 59 OF 4

ISSUE

R0

33.3. SARATHI ENGINEERING ENTERPRISE, HYDERABAD

33.4. SPRING SUPPORTS MFG. COMPANY, KOLKATA

33.5. TECHNO INDUSTRY

33.6. SHREE UMA PIPE MANUFACTURING CO. CALCUTTA.(M)

34. STRAINERS(FAB/CAST/FORGED)

34.1. BOMBAY CHEMICAL EQUIPMENTS, MUMBAI

34.2. GRAND PRIX FAB (P) LTD, NEW DELHI

34.3. GUJARAT OTOFILT, AHMEDABAD

34.4. MULTITEX FILTRATION ENGINEERS PVT. LTD., NEW DELHI

34.5. SPIRAX MARSHALL LTD, PUNE

34.6. OTOKLIN

34.7. GUPTA WORKSHOP. MUMBAI

34.8. UNI KLINGER LIMITED. MUMBAI.(M)

34.9. BHARATI ENGINEERING COMPANY. THANE.(M)

35. STEAM TRAPS-BUCKET/TH.DYN/TH.STAT/FLOAT

35.1. ESCO LTD., INDIA

35.2. PENNANT ENGINEERING PVT. LTD., PUNE


35.4. GREAVES LTD.

35.5. UNIKLINGER LTD

36. STEAM CONDENSATE MANIFOLDS

36.1. ARMSTRONG INDIA

36.2. CESARE BONETTI S.P.A., ITALY

36.3. SPIRAX MARSHALL, PUNE

36.4. FLOWTEMP APPLIANCES PVT. LTD.

36.5. NIRMAL INDUSTRIAL CONTROLS PVT. LTD.

36.6. UNITED WORKS PVT. LTD.

37. SAMPLE COOLERS

37.1. AERO ENGINEERS, AHMEDABAD

37.2. ENPRO INDUSTRIES PVT LTD, PUNE

37.3. G.R. ENGINEERING WORK LTD., MUMBAI

37.4. GRASIM INDUSTRIES LTD., NAGDA

37.5. TECHNO PROCESS EQUIPMENTS (INDIA) LTD., MUMBAI

37.6. TUBE WELD ENGINEERING WORKS LTD, MUMBAI

37.7. UNIVERSAL HEAT EXCHANGERS LIMITED

38. EOT CRANE

38.1. ACME MANUFACTURING CO. LTD., MUMBAI




SHEET 13 OF 59 OF 4

ISSUE

R0

38.2. ANUPAM INDUSTRIES LTD., VALLABH VIDYANAGAR

38.3. ARMSEL MHE PVT.LTD., BANGALORE

38.4. BRAITHEWAITE & CO. LTD., KOLKATA

38.5. EDDY CRANES ENGINEERS PVT. LTD, MUMBAI

38.6. FURNACE & FOUNDRY EQUIPMENT CO., MUMBAI

38.7. HEAVY ENGG. CORPORATION LTD., RANCHI

38.8. MEEKA MACHINERY PVT. LTD., AHMEDABAD

38.9. MUKUND LTD., THANE

38.10. REVA ENGINEERING INDUSTRIES PVT.LTD., NEW DELHI

38.11. TAK MACHINERY & LEASING LTD., MUMBAI

38.12. WMI CRANES LTD., MUMBAI

39. H.O.T CRANE

39.1. EDDY CRANE ENGRS P LTD.

39.2. KALINGA ENGRS. LTD.

39.3. REVA ENGG. IND. P LTD.

39.4. SAYAJI IRON & ENGG P LTD

39.5. ARMSEL MHE P LTD.

39.6. TAK MACHINERY

40. BPCL CATEGORY –(MOBILE CRANES)

40.1. ESCORT LTD. FARIDABAD.(M)

40.2. TATA MOTORS LIMITED.THANE.(M)

40.3. TIL LTD.MUMBAI.(M)

41. CHAIN PULLEY BLOCK

41.1. ANUPAM INDUSTRIES LTD.

41.2. BRADY & MORRIS ENGINEERING CO. LTD.

41.3. HERCULES HOISTS LTD.

41.4. HI-TECH INDUSTRIES

41.5. MEEKA MACHINERY PVT. LTD.

42. GRATINGS

42.1. ALLIED ENGINEERING CORPORATION

42.2. GREATWELD STEEL GRATINGS PVT.

42.3. INDIANA ENGINEERING WORKS (BOMBAY) PVT. LTD.

42.4. KEMROCK INDUSTRIES AND EXPORTS LTD.

42.5. SWATHI ENGINEERS

42.6. WEST COAST ENGINEERING WORKS PVT. LTD.

BPCL CATEGORY -(GRATINGS GALVANISED)

42.7. GUPTA WORKSHOP.MUMBAI.(M)

42.8. ERCON COMPOSITES.JODHPUR.(M)

42.9. INDUSTRIAL PLASTICS.MUMBAI(M)




SHEET 14 OF 59 OF 4

ISSUE

R0

43. BELLOW SEALED VALVES

43.1. BDK MARKETING SERVICES PVT. LTD.

43.2. BELL-O-SEAL VALVES PVT. LTD.

43.3. KSB PUMPS LTD.

43.4. LARSEN & TOUBRO LTD.


44. PRIMARY SUPPORTS

44.1. BARODA EQUIPMENT AND VESSELS PVT LTD

44.2. KINAM ENGINEERING INDUSTRIES

44.3. SPRING SUPPORTS MFG. COMPANY

44.4. SUPREME ENGINEERING WORKS

44.5. SWATHI ENGINEERS

44.6. TINITA ENGINEERING PVT. LTD.

44.7. TECHNO INDUSTRY

44.8. DOLPHIN ENGINEERING

45. SPECIAL SUPPORTS


45.2. PIPE HANGERS & SUPPORTS PRIVATE LTD.

45.3. PIPING & ENERGY PRODUCTS PVT. LTD

45.4. RAJ ENGINEERING CO.

45.5. SARATHI ENGINEERING ENTERPRISE

45.6. SPRING SUPPORTS MFG. COMPANY

45.7. TINITA ENGINEERING PVT. LTD.

TECHNO INDUSTRY

46. EXPANSION BELLOWS

46.1. CORI ENGINEERS PVT. LTD.

46.2. D. WREN INDUSTRIES PVT.LTD.

46.3. DIP-FLON ENGINEERING & CO.

46.4. FLEXICAN BELLOWS & HOSES PVT.LTD

46.5. FLUOROPOLYMER PACKINGS & SEALS PVT.LTD.

46.6. LONESTAR INDUSTRIES

46.7. MIL INDUSTRIES LTD.

46.8. METALLIC BELLOWS (I) PVT. LTD.

46.9. RM APPLIED ENGINEERS

46.10. KELD ELLENTOFT INDIA PVT. LTD.MUMBAI.(M)

46.11. SUR INDUSTRIES PVT LTD.CALCUTTA.(M)

47. NON-SLAM CHECK VALVES




SHEET 15 OF 59 OF 4

ISSUE

R0

FIRE PROTECTION EQUIPMENT APPROVED VENDORS

HYDRANT VALVE NEWAGE / SUKAN / SBJ

BRANCH PIPES AND NOZZLE NEWAGE / SUKAN / SBJ

HOSE PIPE NEWAGE / INDIAN RAYON / JAYSHREE / CHATTRIYA /

NIRMAL

RUBBER HOSE DUNLOP / ROYAL INDIA / SHANTI INDUSTRIES

BUTTERFLY VALVE AUDCO / INTERVALVE / CRANE PROCESS FLOW

TECHNOLOGY / TYCO / FISHER XOMOX

GATE VALVES / NRV (CS) L&T / KSB

FIRE EXTINGUISHERS ZENITH / SUPRIMAX / SAFEX / NITIN FIRE

PIPES TATA / ZENITH / JINDAL

PRESSURE GAUGES GENERAL INSTRUMENTS / FORBES MARSHALL / PRECISION /

H. GURU

HOSE BOX SBJ / NITIN FIRE / KIDDE INDIA

HOSE REEL UNITS MFG STD

WATER MONITOR HD / VIJAY / NEWAGE / VIMAL / VISHAL

DELUGE VALVES HD FIRE

LONG RANGE MONITORS KIDDE / TYCO / CHEMGUARD / VIMAL / VISHAL

PROCESS / MECHANICAL

48. COLUMNS/TOWERS/SCRUBBERS

48.1. ANUP ENGINEERING LTD., AHMEDABAD


48.3. GEECY ENGINEERING PVT.LTD., NAVI MUMBAI

48.4. GODREJ & BOYCE MANUFACTURING CO.LTD., MUMBAI

48.5. INDUS ENGG. COMPANY, MUMBAI

48.6. INDUSTRIAL MANUFACTURERS, MUMBAI

48.7. ISGEC, YAMUNANAGAR


48.9. LLOYDS STEEL INDUSTRIES LTD., MUMBAI

48.10. PHILS HEAVY ENGINEERING PVT LTD, MUMBAI

48.11. TEMA INDIA LTD., MUMBAI

48.12. WALCHANDNAGAR INDUSTRIES LTD., WALCHANDNAGAR

48.13. BHARAT HEAVY PLATES & VESSELS LTD. VISHAKAPATNAN.(M)

48.14. BPCL CATEGORY – HEAVY FABRICATORS

48.15. PRECISION EQUIPMENTS (P) LTD. CHENNAI

48.16. THERMAX LTD. PUNE.(M)

49. REACTORS

49.1. ALSTOM PROJECTS INDIA LTD., KOLKATA



47.1. CRANE ENERGY FLOW SOLUTIONS, USA

47.2. CAMERON VALVES AND MEASUREMENT, USA




SHEET 16 OF 59 OF 4

ISSUE

R0


49.4. INDUS PROJECTS LIMITED, MUMBAI



49.7. KCP LTD., CHENNAI

49.8. LARSEN & TOUBRO LTD.(HAZIRA), SURAT

49.9. LLOYDS STEEL INDUSTRIES LTD., MUMBAI

49.10. PRECISION EQUIPMENTS (CHENNAI) PVT. LTD., CHENNAI


49.12. UNIVERSAL HEAT EXCHANGERS LTD., COIMBATORE

49.13. VIJAY TANKS & VESSELS LTD., VADODARA

49.14. WALCHANDNAGAR INDUSTRIES LTD., WALCHANDNAGAR

49.15. BHARAT HEAVY PLATES AND VESSELS

BPCL CATEGORY – HEAVY FABRICATORS

49.16. PHILS HEAVY ENGINEERING PVT LTD, MUMBAI

49.17. THERMAX LTD. PUNE.(M)

50. DRUMS/TANKS/VESSELS









50.9. INDIA TUBE MILLS & METAL INDUSTRIES LTD., MUMBAI

50.10. CONSOLIDATED CHEMEQUIP (MFR) CORPN.

50.11. PHILS ENGINEERING CORPORATION

50.12. TRIOFAB (INDIA) PVT. LTD.


BPCL CATEGORY – ( PRESSURE VESSELS )

50.14. GRASIM INDUSTRIES LIMITED. NAGDA.(M)


50.16. THERMAX LIMITED PUNE.(M)

50.17. HINDUSTAN DORR-OLIVER LIMITED

51. AIR COOLED HEAT EXCHANGERS(HIGH PRESSURE) / AIR COOLERS / HEATERS (FINNED TUBES)

51.1. BHARAT HEAVY PLATES & VESSELS LTD.

51.2. GEI INDUSTRIAL SYSTEMS LTD., BHOPAL

51.3. BGR ENERGY SYSTEMS LTD., CHENNAI

51.4. JORD ENGINEERS, MUMBAI


51.6. PAHARPUR COOLING TOWERS LTD., MUMBAI

51.7. PATELS AIRTEMP (INDIA) LTD., RAKANPUR




SHEET 17 OF 59 OF 4

ISSUE

R0


52. HEAT EXCHANGERS (SHELL & TUBE TYPE)

52.1. ALFA LAVAL (INDIA) LTD., PUNE

52.2. ANUP ENGINEERING LTD., AHMEDABAD


52.4. GEECY ENGINEERING PVT.LTD., NAVI MUMBAI


52.6. PHILS HEAVY ENGINEERING PVT. LTD.







52.13. PRECISION EQUIPMENTS (CHENNAI) PVT. LTD., CHENNAI

52.14. REYNOLDS CHEMEQUIP PVT. LTD., MUMBAI



52.17. UNIVERSAL HEAT EXCHANGERS LTD., COIMBATORE

52.18. AEROTHERM PRODUCTS

BPCL CATEGORY – ( HEAT EXCHANGER - FERROUS )

52.19. AIR COILS MANUFACTURING CO. MUMBAI.(M)


52.21. GRASIM INDUSTRIES LIMITED. NAGDA.(M)

52.22. INDIA TUBE MILLS & METAL INDUSTRIES LTD. MUMBAI.(M)

52.23. MAZAGON DOCK LIMITED. MUMBAI.(M)

52.24. THERMAX LIMITED. PUNE.(M)

52.25. TRIOFAB (INDIA) PVT. LTD. NAVI MUMBAI.(M)

52.26. HINDUSTAN DORR-OLIVER LIMITED

BPCL CATEGORY – ( HEAT EXCHANGER – NON FERROUS )

52.27. AIR COILS MANUFACTURING CO. MUMBAI.(M)


52.29. THERMAX LIMITED PUNE.(M)

53. PLATE HEAT EXCHANGERS

53.1. ALFA LAVEL (INDIA) LTD.

53.2. GEA ECOFLEX INDIA

53.3. TRANTER INDIA PVT. LTD.

53.4. IDMC LIMITED


53.6. SPX INDIA PVT. LTD.




SHEET 18 OF 59 OF 4

ISSUE

R0


54. SPIRAL HEAT EXCHANGERS

54.1. ALFA LAVEL (INDIA) LTD.


55. PROCESS COMPRESSORS (API - RECIPROCATING)

55.1. BHARAT PUMPS & COMPRESSORS LTD., ALLAHABAD

55.2. BURCKHARDT (INDIA) PVT. LTD.

55.3. DRESSER-RAND INDIA PVT. LTD., MUMBAI

55.4. NEUMAN & ESSER INDIA

56. PROCESS COMPRESSORS (NON API - RECIPROCATING)


56.2. BURCKHARDT (INDIA) PVT. LTD.

56.3. INGERSOLL-RAND (INDIA) LTD.

56.4. KIRLOSKAR PNEUMATIC CO. LTD.

57. GAS COMPRESSORS (CENTRIFUGAL)

57.1. BHARAT HEAVY ELECTRICALS LTD.

57.2. DRESSER-RAND INDIA PVT. LTD., MUMBAI

57.3. EBARA CORPORATION, JAPAN

57.4. HOWDEN PROCESS COMPRESSOR, U.K.

57.5. KAWASAKI HEAVY INDUSTRIES LTD., JAPAN

57.6. KOBE STEEL LTD., JAPAN

57.7. MANNESMANN DEMAG AG, GERMANY

57.8. MITSUBISHI HEAVY INDUSTRIES LTD., JAPAN

57.9. SIEMENS INDIA

57.10. SULZER INDIA

58. AIR COMPRESSORS (CENTRIFUGAL)

58.1. ATLAS COPCO ENERGAS

58.2. BHARAT HEAVY ELECTRICALS LIMITED

58.3. INGERSOLL-RAND (INDIA) LTD.

58.4. SIEMENS LIMITED

59. AIR COMPRESSORS (RECIPROCATING)

59.1. CHICAGO PNEUMATICS LTD.

59.2. DRESSER RAND INDIA PVT. LTD.

59.3. INGERSOLL-RAND INDIA PVT. LTD., MUMBAI

59.4. KIRLOSKAR PNEUMATIC CO. LTD., PUNE




SHEET 19 OF 59 OF 4

ISSUE

R0


60. AIR COMPRESSORS (SCREW)

60.1. ATLAS COPCO ENERGAS

60.2. HOWDEN AIR AND GAS INDIA PVT. LTD.

60.3. KIRLOSKAR PNEUMATIC CO. LTD., PUNE


61. AIR COMPRESSORS (PISTON TYPE PORTABLE UNITS)

61.1. ACMEVAC SALES PVT. LTD.

61.2. CHICAGO PNEUMATIC INDIA LTD.


62. AIR OPERATED DIAPHRAGM PUMPS

62.1. KIRAN PUMPS

62.2. NETZSCH INDIA PVT. LTD.

62.3. SHANBHAG & ASSOCIATES

62.4. SYP ENGINEERING CO. PVT. LTD.

63. CENTRIFUGAL PUMPS (VER. TURBINE PUMP)

63.1. FLOWSERVE INDIA CONTROLS (P) LTD, MUMBAI

63.2. ITT GOULDS PUMPS INC

63.3. JYOTI LTD.

63.4. KIRLOSKAR BROTHERS LTD.

63.5. MATHER & PLATT INDIA, PUNE

63.6. WPIL LTD.

64. DRUM PUMPS

64.1. KIRAN PUMPS

64.2. MONIBA ANAND ELECTRICALS PVT. LTD.

64.3. ROTO PUMPS LTD.

64.4. SHANBHAG & ASSOCIATES

64.5. SLEEK PUMPS & VALVES

64.6. UNION ENTERPRISE PVT. LTD.

65. CENTRIFUGAL PUMPS(HORIZONTAL PUMPS NON-API)

65.1. AKAY INDUSTRIES PVT. LTD.

65.2. MATHER & PLATT INDIA, PUNE

65.3. KISHOR PUMPS LTD., PUNE


65.5. ITT CORPORATION INDIA PVT. LTD.

65.6. KSB PUMPS LTD., MUMBAI

65.7. SULZER PUMPS INDIA LTD., NAVI MUMBAI




SHEET 20 OF 59 OF 4

ISSUE

R0


65.8. JOHNSON PUMP (INDIA) LIMITED


65.10. KIRLOSKAR BROTHERS LTD., PUNE

65.11. KIRLOSKAR EBARA PUMPS LTD.

66. CENTRIFUGAL PUMPS(HORIZONTAL PUMPS - API)


66.2. ITT CORPORATION INDIA PVT. LTD.




BPCL CATEGORY – HORIZONTAL CENTRIFUGAL PUMPS – SPL PROCESS PURPOSE

66.6. BP&CL

BPCL CATEGORY – PUMP CENTRIFUGAL HOR (SPECIAL PURPOSE PROCESS – CRITICAL

SERVICE)

66.7. EBARA CORPORATION JAPAN

66.8. GOULDS PUMPS INC

66.9. KSB PUMPIN ARMETUREN GERMANY

66.10. NOUVO PIGNONE SPA ITALY

66.11. POMPE GABBIONETA SPAITALY

66.12. POMPES GUINARD (KSB) FRANCE

66.13. SULZER PUMPEN DEUTSCHLAND GMBH GERMANY

66.14. LAWRENCE PUMPS INC

66.15. DAVID BROWN PUMPS LTD.

66.16. DMW CORPORATION

66.17. SULZER BINGHAM PUMPS INC.

67. CENTRIFUGAL CANNED MOTOR TYPE PUMP

67.1. HERMETIC PUMPEN GMBH, GERMANY

67.2. KLAUS UNION, GERMANY

67.3. NIKKISO CO LTD, JAPAN



67.6. KIRLOSKAR EBARA PUMPS LTD., PUNE

68. SUNDYNE PUMPS

68.1. NIKKISO SUNDSTRAND CO. LTD., JAPAN

68.2. SUNDSTRAND FLUID HANDLING(SUNDYNE), U.S.A

69. CENTRIFUGAL PUMPS(MULTISTAGE PUMPS)




SHEET 21 OF 59 OF 4

ISSUE

R0







70. RECIPROCATING PUMPS(METERING/DOSING PUMPS)

70.1. LEWA HERBERT OTT GMBH & CO, GERMANY

70.2. MILTON ROY INDIA (P) LTD., CHENNAI

70.3. PULSAFEEDER, U.S.A.

70.4. SWELORE ENGINEERING PVT. LTD., AHMEDABAD

70.5. V.K. PUMP INDUSTRIES PVT. LTD., MUMBAI

BPCL VENDORS(PUMPS-RECIPRO(CONTROLLED VOLUME/DIAPHRAGM/PLUNGER/PISTON)


70.7. BRAN &LUEBBE GMBH UK

70.8. DOSAPRO MILTON ROY FRANCE

70.9. GEHO PUMPS NETHERLAND

70.10. NIKKISO CO.LTD.(NIKKISO KK)JAPAN

70.11. PERONI POME SPA (FORMARLY PERSONI) ITALY

70.12. CRANE CO. USA

70.13. OCSER GES MBH &CO KG AUSTRIA

70.14. ORLITA GMBH & CO.KG.GERMANY

70.15. DOWSON DOWNIE LAMONT LTD. U.K.

70.16. NATIONAL OIL WELL PTE LTD. USA

70.17. DMW CORPORATION., JAPAN

70.18. FLOWSERV

71. CENTRIFUGAL PUMPS (VER. PUMPS NDMW CORPORATION JAPANON-API)

71.1. BHARAT PUMPS & COMPRESSORS LTD., ALLAHABADFLOWSERVE

71.2. DMW CORPORATION., JAPAN


71.4. KIRLOSKAR BROTHERS LTD., PUNE


71.6. MATHER & PLATT PUMPS LTD, MUMBAI

71.7. RUHR PUMPEN GMBH, GERMANY

71.8. SHIN NIPPON MACHINERY CO LTD, JAPAN

71.9. SULZER PUMPS LTD., INDIA


71.11. JOHNSON PUMP (INDIA) LTD.

72. BOILER FEED WATER PUMPS / CENTRIFUGAL PUMPS FOR BFW(MULTISTAGE)




SHEET 22 OF 59 OF 4

ISSUE

R0





72.4. FLOWSERVE INDIA

73. FIRE WATER PUMPS (HORIZONTAL / VERTICAL)

73.1. FLOWSERVE INDIA CONTROLS (P) LTD.



73.4. MATHER & PLATT (INDIA) LTD.

73.5. BPCL CATEGORY – PUMP CENTRIFUAL H/V (FIRE WATER OR SEA WATER)

73.6. DMW CORPORATION

73.7. KBS PUMPEN, GERMANY

73.8. SULZER USA

73.9. EBARA CORPORATION, JAPAN

73.10. NOUVO-PIGNONE SPA, ITALY

74. DIESEL ENGINE FOR FIRE WATER PUMPS

74.1. CUMMINS INDIA LTD.

74.2. KIRLOSKAR OIL ENGINES LTD.

74.3. GREAVES COTTON LTD.

75. GEAR PUMPS

75.1. JOHNSON PUMP (INDIA) LTD.

75.2. MAAG PUMPS, SWITZERLAND

75.3. TUSHACO PUMPS PVT. LTD.

76. SUBMERSIBLE PUMPS

76.1. GRUNDFOS PUMPS INDIA PVT. LTD.

76.2. KSB PUMPS LTD.


76.4. KISHOR PUMPS PVT. LTD.

76.5. S. U. PUMPS

77. SCREW PUMPS

77.1. ALKETRON ENGINEERING INDUSTRIES PVT. LTD.

77.2. BORNEMANN (I) LTD.

77.3. TUSHACO PUMPS PVT. LTD.




SHEET 23 OF 59 OF 4

ISSUE

R0


77.4. ROTO PUMPS LTD.

77.5. UT PUMPS & SYSTEMS PVT. LTD.

77.6. HOUTTUIN

77.7. LEISPRITZ

77.8. IMO/WARREN

77.9. FLUID PUMPS

77.10. PLENTY MITLESS LTD, UK

77.11. WEIR PUMPS

77.12. DAVID BROWN, UK

78. VACUUM PUMPS

78.1. JOYAM ENGINEERS & CONSULTANTS

78.2. PPI PUMPS PVT. LTD.

78.3. STERLING SIHI

78.4. TMVT INDUSTRIES PVT. LTD.

78.5. VIJAY PUMPS PVT. LTD.

78.6. VINDI VAK PUMPS PVT. LTD.

79. VERTICAL SUMP PUMPS

79.1. AKAY INDUSTRIES PVT. LTD.


79.3. JOHNSON PUMPS (INDIA) LTD.


79.5. KISHOR PUMPS PVT. LTD.

79.6. SULZER PUMPS INDIA LTD.

79.7. SU MOTORS

80. FIRED HEATERS

80.1. BRIDGE & ROOF CO. (INDIA) LTD., KOLKATA

80.2. HEURTEY PETROCHEM, MUMBAI


80.4. MUKUND LTD., THANE

80.5. PETRON ENGINEERING CONSTRUCTION LTD., MUMBAI

80.6. TECHNIP KT INDIA LTD, NOIDA

80.7. THERMAX LTD., PUNE

81. BURNERS

81.1. CALLIDUS TECHNOLOGIES LTD.

81.2. HAMWORTHY COMBUSTION ENGG. LTD.




SHEET 24 OF 59 OF 4

ISSUE

R0


81.3. JOHN ZINK COMPANY LTD.

81.4. LD DUKIER B. V.

81.5. ZEECO INC

81.6. AADI ENERGY SYSTEMS PVT. LTD.CALCUTTA.(M)

81.7. ADVANI-OERLIKON LTD.PUNE.(M)

81.8. AIROIL-FLAREGAS (I) PVT. LTD.AHMEDABAD.(M)

82. COLUMN TRAYS & INTERNALS


82.2. HIPACK, GHAZIABAD

82.3. KAMAL ENGINEERING CORPORATION, NEW DELHI

82.4. KEVIN ENTERPRISE PVT.LTD., MUMBAI

82.5. KOCH-GLITSCH INDIA LTD., MUMBAI

82.6. LARSEN & TOUBRO LTD.(HAZIRA), SURAT

82.7. MARS PROJECTS PVT.LTD., KOLKATA

82.8. NATIONAL TOWERPACK INDUSTRIES, MUMBAI

82.9. NORTON CHEMICAL PROCESS PRODUCTS CORPORATION, U.S.A

82.10. SULZER INDIA LTD., PUNE

82.11. VIKAS ENGG. WORKS, VISAKHAPATNAM

82.12. SWAN ENTERPRISES. CHENNAI.(M)

83. COALESCERS

83.1. AXSIA HOWMAR LTD, UNITED KINGDOM

83.2. CLARKE RELIANCE CORPORATION, USA

83.3. FACET USA, USA


83.5. KING TOOL COMPANY, U.S.A

83.6. SULZER INDIA LTD., PUNE

83.7. MULTITEX FILTRATION ENGINEERS PVT. LTD., NEW DELHI

83.8. PALL CORPORATION, PUNE

83.9. PERRY EQUIPMENT CORPORATION(PECO), U.S.A

83.10. RAVI TECHNO SYSTEMS PVT. LTD.(CHANGED TO PETROMAR), MUMBAI

83.11. SIIRTEC NIGI S.P.A., ITALY

83.12. WAKO INDUSTRIAL CO. LTD., TOKYO

84. EJECTOR

84.1. KOERTING ENGINEERING PVT. LIMITED, CHENNAI

84.2. LARSEN & TUBRO LTD., MUMBAI

84.3. MAZDA LTD., AHMEDABAD

84.4. NEW FIELD INDUSTRIAL EQUIPMENT PVT.LTD., VADODARA

84.5. WIEGAND INDIA PVT.LTD., NEW DELHI




SHEET 25 OF 59 OF 4

ISSUE

R0


85. SILENCER

85.1. ACOUSTICS INDIA PVT. LTD., TIRUCHIRAPALLI

85.2. BURGESS MANNING (I) PVT. LTD., NEW DELHI

85.3. C R MICROTOUCH ENGINEERS, RANIPET


85.5. INDIRA INDUSTRIES, INDIANA

85.6. MICRO PRECISION PRODUCTS (P) LTD., FARIDABAD

85.7. PR ACCOUSTICAL AND ENGG. WORKS PVT. LTD., TIRUCHIRAPALLI

86. DESUPERHEATER

86.1. FOURESS ENGINEERING (I) LTD., MUMBAI

86.2. H.K. INDUSTRIES, MUMBAI


86.4. KROHNE MARSHALL PVT. LTD., PUNE

86.5. LEPRETFLO ENGG. PVT. LTD., AHMEDABAD

86.6. MAZDA LTD., AHMEDABAD

86.7. PRALKA ASSOCIATES, MUMBAI

86.8. SPX VALVES & CONTROLS, UNITED STATES

86.9. THEETA ELECTRICALS PVT. LTD., DELHI

86.10. TYCO VALVES & CONTROLS, INDIA

86.11. VALFLO PVT LTD, AHMEDABAD

87. MIST ELIMINATORS / DEMISTER

87.1. CONTINENTAL PROFILES LIMITED, FARIDABAD

87.2. EVERGREEN WIRE TECHNOLOGIES (P) LTD., MUMBAI

87.3. HAVER STANDARD INDIA PVT. LTD., MUMBAI

87.4. JEETMULL JAICHAND LAL PVT. LTD., KOLKATA

87.5. MISTER-MESH WIRE PRODUCTS, MUMBAI

87.6. PACE ENGINEERING INDUSTRIES PVT. LTD., MUMBAI

88. CONSERVATION VENT / DE-AERATOR

88.1. AERO ENGINEERS, AHMEDABAD



88.4. PORTEGO EQUIPMENTS PVT. LTD., MUMBAI

88.5. S.B.ENTERPRISES, BHARUCH



88.8. VARALL ENGINEERS, MUMBAI

88.9. VAREC VAPOUR CONTROL INC., INDIA

89. CHEMICAL INJECTION PACKAGE / DOSING SETS




SHEET 26 OF 59 OF 4

ISSUE

R0


89.1. CHEMBOND CHEMICALS LTD., NAVI MUMBAI

89.2. ENPRO INDUSTRIES PVT. LTD., PUNE

89.3. ION EXCHANGE INDIA LTD.

89.4. MILTON ROY INDIA (P) LTD., CHENNAI

89.5. SHAPOTOOLS, MUMBAI

89.6. SWELORE ENGINEERING PVT. LTD., AHMEDABAD

89.7. V.K. PUMP INDUSTRIES PVT. LTD., MUMBAI

90. SAFETY VALVES / PRESSURE SAFETY VALVES

90.1. FAINGER LESER VALVES PVT. LTD.

90.2. ANDERSON GREENWOOD CROSBY, UNITED KINGDOM


90.4. DRESSER VALVE INDIA PVT. LTD., MUMBAI

90.5. XOMOX SANMAR LTD.


90.7. MEKASTER

90.8. TYCO SANMAR LTD.


90.10. WEIR VALVES & CONTROL UK LTD, UNITED KINGDOM

90.11. BHEL

91. HVAC SYSTEM

91.1. BLUE STAR LTD., MUMBAI

91.2. ASIA BROWN BOVERI LTD.

91.3. CARRIER AIRCON LTD., MUMBAI

91.4. BATLIBOI & COMPANY LTD.

91.5. EMERSON PROCESS MANAGEMENT (INDIA) PVT. LTD.

91.6. KIRLOSKAR PNEUMATIC CO. LTD., MUMBAI

91.7. SYSTEMS & COMPONENTS (I) PVT. LTD.

91.8. VOLTAS LIMITED, MUMBAI

92. RC MACHINES

92.1. GEA TECHNOFRIGO

92.2. VOLTAS

92.3. BLUESTAR

92.4. CARRIER

92.5. JOHNSON CONTROLS (YORK)

93. AIR PRESSURIZATION UNIT

93.1. ADVANCE VENTILATION PVT LTD, NEW DELHI





SHEET 27 OF 59 OF 4

ISSUE

R0


93.3. C.DOCTOR INDIA PVT LTD, AHMEDABAD

93.4. DUSTVEN PVT LTD, BANGALORE

93.5. DUVENT FANS PVT. LTD., NEW DELHI

93.6. EMERSON NETWORK POWER (I) LTD., (EMERSON LIEBERT), MUMBAI

93.7. FLAKT (INDIA) LTD., MUMBAI


93.9. LAXMI AIR CONTROL PVT. LTD, MUMBAI


93.11. S.K. SYSTEMS PRIVATE LTD, DELHI


94. AGITATOR

94.1. GMM PFAUDLER LIMITED, MUMBAI

94.2. MIXRITE ENGINEERING PVT.LTD., MUMBAI

94.3. RATHI LIGHTNIN MIXERS PVT. LTD., PUNE

94.4. REMI PROCESS PLANT & MACHINERY LTD., MUMBAI

94.5. STANDARD ENGINEERS, MUMBAI

94.6. THERMOTECH ENGINEERING

95. RUPTURE DISC

95.1. BS & B SAFETY SYSTEMS (I) LTD., MUMBAI

95.2. ELFAB LIMITED, UNITED KINGDOM


95.4. IMI MORSTON LTD., UK

95.5. OKLAHOMA SAFETY EQUIPMENTS CO, INC, U.S.A

95.6. REMBE GMBH SAFETY + CONTROL, GERMANY

96. SAFETY SHOWER & EYE WASH

96.1. FRANCIS LESLIE & CO.PVT.LTD., MUMBAI

96.2. CREATIVE ENGINEERS

96.3. UNICARE EMERGENCY EQUIPMENTS PVT.LTD., MUMBAI

97. AIR CONDITIONING UNIT

97.1. ABB LTD., MUMBAI

97.2. BATLIBOI & COMPANY LTD., MUMBAI


97.4. CARRIER AIRCON LTD., MUMBAI

97.5. EMERSON NETWORK POWER (I) LTD., (EMERSON LIEBERT), MUMBAI






SHEET 28 OF 59 OF 4

ISSUE

R0


98. RESTRICTION ORIFICE

98.1. EMFA INDUSTRIES, MUMBAI

98.2. GENERAL INSTRUMENTS CONSORTIUM, MUMBAI

98.3. HYDROPNEUMATICS, MUMBAI

98.4. JRU CONTTROL PVT LTD, CHENNAI

98.5. MICRO PRECISION PRODUCTS (P) LTD., FARIDABAD

98.6. MINCO INDIA PVT. LTD, MUMBAI

98.7. STAR-MECH CONTROLS (I) PVT.LTD., PUNE

99. BASKET FILTER

99.1. GRAND PRIX FAB P LTD.

99.2. GUJARAT OTOFILT

99.3. MULTITEX FILTERATION ENG. LTD.

99.4. OTOKLIN

99.5. MARBO INDLA FILTERS.MUMBAI.(M)

99.6. BARTON FIRTOP ENGINEERING CO. LTD. UK

99.7. FLUID ENGINEERING, USA

100. AIR DRIER / GAS DRIER

100.1. GASO ENERGY SYSTEM

100.2. INDCON PROJECTS & EQUIPMENTS LTD.

100.3. KILBURN ENGG. LTD.

100.4. PURIFLAIR INDIA PVT. LTD.

100.5. ADVANCE COMPARE SYSTEMS PVT. LTD.

100.6. DEL-AIR INDIA PVT. LTD.

100.7. MVS ENGINEERING LTD.

101. CENTRIFUGAL BLOWERS


101.2. C. DOCTOR & CO. PVT. LTD.

101.3. FLAKT INDIA LTD.

101.4. LAXMI AIR CONTROL PVT. LTD.

101.5. REITZ INDIA LTD.

101.6. TLT ENGINEERING PVT. LTD.

102. WASTE HEAT BOILERS

102.1. ALSTOM PROJECTS INDIA LTD.


102.3. ISGEC JOHN THOMPSON


102.5. THERMAX LIMITED




SHEET 29 OF 59 OF 4

ISSUE

R0


102.6. THERMAL SYSTEMS (HYDERABAD) PVT. LTD.

102.7. WALCHANDNAGAR INDUSTRIES LTD.

103. BREATHER VALVES

103.1. CHEMTROLS INDUSTRIES LTD.


103.3. HYDROPNEUMATICS

103.4. PROTEGO EQUIPMENT PVT. LTD.

103.5. TELTECH INSTRUMENTATION PVT. LTD.

103.6. WHESSOE VAREC LIMITED.DURHAM(M) ( BPCL CATEGORY – P&V VALVES)

104. COOLING TOWER

104.1. BDT LIMITED

104.2. PAHARPUR COOLING TOWERS

104.3. SHRIRAM EPC LTD.

104.4. SOUTHERN COOLING TOWERS PVT. LTD.

104.5. HAMON SHRIRAM COTTRELL PVT. LTD.

104.6. ADVANCE COOLING TOWERS PVT LTD.MUMBAI.(M)

104.7. COOLFLO ENGINEERS PVT. LTD.MUMBAI.(M)

104.8. MIHIR ENGINEERS (P) LIMITED.MUMBAI.(M)

104.9. PALTECH COOLING TOWERS & EQUIPMENTS LTD.NEW DELHI.(M)

105. ELECTRODES / WELDING CONSUMABLES

105.1. ADVANI – ORLIKON LTD.

105.2. ANAND ARC ELECTRODES PVT. LTD.

105.3. D&H SECHERON ELECTRODES PVT. LTD.

105.4. ESAB INDIA LTD.

105.5. HONAVAR ELECTRODES LTD.

105.6. MAILAM INDIA LTD.

105.7. MODI ARC ELECTRODES CO.

105.8. WELDCRAFT PVT. LTD.

105.9. GEE LIMITED.THANE.(M)

105.10. BOHLER THYSSEN

105.11. OERLIKON

105.12. TASETO

105.13. AVESTA

105.14. SANDVIK

106. EXCESS FLOW VALVE

106.1. CHANDRA ENGINEERING & MECHANICAL PVT. LTD.

106.2. GENERAL INSTRUMENTS CONSORTIUM




SHEET 30 OF 59 OF 4

ISSUE

R0


106.3. MALEMA SENSORS INDIA PVT. LTD.

107. FLAME ARRESTORS



107.3. HYDROPNEUMATICS

107.4. PROTEGO EQUIPMENT PVT. LTD.

108. FLARE

108.1. ADVANI – ORLIKON LTD.

108.2. AIROIL FLAREGAS (I) LTD.

109. INSULATION (HOT & COLD)

109.1. ASSOCIATED INSULATION CO.

109.2. G.J. INSULATIONS PVT.LTD.

109.3. LEAR INSULATION PVT. LTD.

109.4. LLOYD INSULATIONS (INDIA) LTD.

109.5. NAVBHARAT INSULATION & ENGINEERING CO

109.6. NEWKEM INDUSTRIES

109.7. KAFER PUNJ LLOYD

109.8. ROCKWOOL INSULATION (I) PVT.LTD.

109.9. SHREEJI INSULATIONS PVT LTD

109.10. THERMAL INSULATIONS

BPCL CATEGORY -(BONDED MINERAL WOOL/CROWN WOOL)

109.11. MINWOOL ROCK FIBRES LTD.HYDERABAD.

109.12. ROCKWOOL (INDIA) LIMITED.MUMBAI.(M)

109.13. LLOYD'S ROCKFIBRES LTD. MUMBAI

110. KNIFE GATE VALVES

110.1. HI-TECH BUTTERFLY VALVES (I) PVT. LTD.


111. MECHANICAL SEALS

111.1. EAGEL

111.2. FLOWSERVE SANMAR LTD

111.3. JOHN CRANE ENGG. SEALING SYSTEM LTD.

112. INDUSTRIAL PAINTS

112.1. GOODLASS NEROLAC PAINTS PVT. LTD.MUMBAI.(M)

112.2. ALKALI & CHEMICALS CORPN. OF INDIA LTD.MUMBAI.(T)

112.3. ASIAN PAINTS (I) LIMITED.MUMBAI.(T)

112.4. BERGER PAINTS INDIA LTD.MUMBAI.(T)




SHEET 31 OF 59 OF 4

ISSUE

R0


112.5. ESDEE PAINTS PVT. LTD.MUMBAI.(T)

112.6. JENSON & NICHOLSON (I) LTD.MUMBAI.(T)

112.7. MERCURY PAINTS & VARNISHES LTD.MUMBAI.(T)

112.8. SHALIMAR PAINTS LTD.MUMBAI.(T)

113. RUBBER LINING

113.1. CORI ENGINEERS PVT. LTD.

113.2. ELASTOMER LINING WORKS

113.3. INDUSTRIAL MOULDERS

113.4. LEBRACS RUBBER LININGS PVT. LTD.

113.5. MIL INDUSTRIES LTD.

113.6. POLY RUBBER PRODUCTS

113.7. SHRI RAM RUBTECH PVT.LTD.

114. SPRAY NOZZLE

114.1. KINGSLEY INDUSTRIES LTD

114.2. LECHLER (INDIA) PVT. LTD.

114.3. SIDDHARTH ENTERPRISES

114.4. SPRAYTECH

115. WATER TREATMENT PLANT

115.1. DOSHI ION EXCHANGE & CHEMICAL IND. LTD.

115.2. ION EXCHANGE (INDIA) LTD.

115.3. THERMAX LTD.

116. STEAM TURBINE

116.1. DRESSER RAND

116.2. KIRLOSKAR EBARA

116.3. GE NUOVO PIGNONE

116.4. SIEMENS LTD

116.5. ALSTOM INDIA

116.6. BHEL

116.7. COPPUS

116.8. ELLIOTT

WHEEL KEYS

BPCL VENDORS

116.9. GAMZEN PLAST P LTD. MUMBAI

116.10. GUPTA WORKSHOP. MUMBAI

116.11. RATTAN ENGINEERS. MUMBAI

116.12. RAVAT ENGG. WORKS. MUMBAI




SHEET 32 OF 59 OF 4

ISSUE

R0


ELEVATORS/LIFTS

BPCL VENDORS

116.13. OTIS ELEVATOR CO. INDIA LTD. MUMBAI

FORKLIFT

BPCL VENDORS

116.14. GODREJ & BOYCE MFG. CO. LTD. MUMBAI

117. GEARBOX – SPECIAL PURPOSE (API 613 TYPE)

117.1. PEKRUN

117.2. HITACHI, JAPAN

117.3. HITACHI NACO TRANSMISSION, JAPAN

117.4. ALLEN, USA

117.5. BHS, USA

117.6. FLENDER, USA

117.7. GRAFFENSTADEN, GERMANY

117.8. LUFKIN, GERMANY

117.9. MAAG, SWIZERLAND

117.10. NIPPON, JAPAN,

117.11. PHILADELPHIA, USA

117.12. RENK, USA

117.13. EAGLE, KK

118. FLEXIBLE METTALIC COUPLING (API 671)

118.1. EAGLE (BENDIX), JAPAN

118.2. EUROFLEX, INDIA

118.3. FLEXIBOX, UK

118.4. LUCAS, UK

118.5. THOMAS, USA

118.6. JOHN CRANE, INDIA

119. FLEXIBLE METTALIC COUPLING (NON API)

119.1. UNIQUE TRANSMISSION, INDIA

119.2. LOVEJOY, INDIA

119.3. TRIVENI FLEXIBOX, INDIA

119.4. JOHN CRANE, INDIA

120. DRY GAS SEAL AND CONTROL / FILTER SKIDS

120.1. JOHN CRANE, USA/INDIA/JAPAN

120.2. EAGLE, JAPAN/INDIA

120.3. FLOWSERVE, USA/INDIA




SHEET 33 OF 59 OF 4

ISSUE

R0


121. LUBE OIL SYSTEM (API 614)

121.1. ENPRO INDUSTRIES PVT. LTD., INDIA

121.2. SOUTHERN LUBRICATION PVT. LTD., INDIA

121.3. TRIVENI PLENTY ENGG. LTD., INDIA

122. STATIC MIXERS

122.1. SULZER INDIA

122.2. CHEMINEER INC, USA

122.3. LIGHTNIN MIXERS, UK

122.4. STATIFLOW INTERNATIONAL LTD., UK

122.5. MIXRITE CORPORATION, INDIA

122.6. SULZER LTD., INDIA

122.7. BRAN & LUEBBE GMBH, GERMANY

122.8. PREMATECHNIK GMBH, GERMANY

123. SAMPLING SYSTEM

123.1. CHEMTROLS

123.2. UOP

124. DESUPERHEATER

124.1. MAZDA

124.2. FORBES MARSHALL

125. DEAREATOR

125.1. THERMAX

126. SAMPLING VALVE

126.1. DOPACH, NETHERLAND

126.2. STRAHMAN VALVES, USA

126.3. LA TECHNOVALVO, ITALY

127. PLATES (CS / SS / LAS / CLAD)

127.1. ACRONI

127.2. DILLINGER HUTTE GTS (MILL), GERMANY

127.3. DMV FRANCE

127.4. DUFERCO S A

127.5. EXPLO HUNGARY KFT.

127.6. INDUSTEEL,BELGIUM

127.7. JACQUET NEDERLAND

127.8. VOESTALPINE GROBBLECH GMBH, AUSTRIA

127.9. ESSAR STEEL, INDIA

127.10. STEEL AUTHORITY OF INDIA, INDIA




SHEET 34 OF 59 OF 4

ISSUE

R0


127.11. LLOYDS STEEL INDUSTRIES LTD, INDIA

127.12. SALZGITTER INTERNATIONAL, GERMANY

127.13. POSCO, KOREA

127.14. NIPPON STEEL, JAPAN

127.15. RUKKI METALS, FINLAND

127.16. THYSSENKRUPP

127.17. KOBE STEEL, JAPAN

128. FORGINGS

128.1. BAYFORGE

128.2. BRIGHTEX

128.3. BUKWANG

128.4. CD ENGINEERING COMPANY GAZIABAD

128.5. CD INDUSTRIES, GAZIABAD

128.6. CHAUDHARY HAMMER WORKS

128.7. DAE HWA METAL CO. LTD, KOREA

128.8. ECHJAY FORGINGS PVT. LTD.

128.9. GALPERTI, ITALY

128.10. GOLDEN IRON AND STEEL WORKS

128.11. GOVA GMBH

128.12. HANWHCORPORATION, KOREA

128.13. HYUNDAI FORGINGS CO, KOREA

128.14. JAC FORGINGS

128.15. JK FORGINGS

128.16. KOFCO KOREA

128.17. KUNJ FORGINGS,

128.18. MELESI, ITALY

128.19. METSTEEL, BUSAN KOREA

128.20. MS FITTINGS

128.21. MYSCO CO LTD.

128.22. O SUNG KOREA

128.23. OFFICINE NICOLA


128.25. PRADEEP METALS

128.26. PUNJAB STEEL WORKS PVT. LTD.

128.27. RP ENGINEERING PVT. LTD.

128.28. SANGHVI FORGINGS & ENGINEERING PVT. LTD


128.30. TAEWOONG CO LTD

128.31. ULMA SPAIN

129. DISHED ENDS




SHEET 35 OF 59 OF 4

ISSUE

R0


129.1. AFFLERBACH BODENPRESSEREI GMBH

129.2. CEREC SAS

129.3. DILLINGER

129.4. VOESTALPINE GMBH

130. CLAD TUBE SHEETS

130.1. NOBELCLAD EUROPE.

131. BOLT TIGHTNER

131.1. HYTORC MUMBAI

132. ANODES

132.1. GOLCONDA

132.2. ELECTROPROTECTION SERVICES, SEMBAKKAM, CHENNAI

133. DAMPERS & ISOLATORS

133.1. BACHMANN INDUSTRIES (I) LTD., INDIA

133.2. FOURESS ENGG. (I) LTD. INDIA

133.3. KAMAL ENGINEERING CORPORATION INDIA

134. REFRACTORIES

134.1. ASSOCIATED CEMENT COMPANY LTD.

134.2. CARBORUNUM UNIVERSAL LTD.

134.3. MAHAVIR REFRACTORIES CORPORATION

134.4. TATA REFRACTORIES LTD.

134.5. PACFIC REFRACTORIES LTD.,

134.6. CASTWELL INDUSTRIES

134.7. BABCOCK & WILLCOX INTERNATIONAL INC, USA

134.8. BASCO LTD., UK

134.9. COMBUTION ENGINEERING INC., USA

134.10. DIDIER WERKS AG GERMANY

134.11. GENERAL REFRACTORIES CO. USA

134.12. MANVILLE DE FRANCE S.A. FRANCE

134.13. PLIBRICO B. V. , NETHERLAND

134.14. PREMIER REFRACTORIES, USA

135. CERAMIC FIBRE

135.1. MUGURAPPA MORGAN THERMAL CERAMIC LTD., INDIA

135.2. ORIENT CERLANE LTD. INDIA / ORIENT CERWOOL

135.3. LLOYDS INSULATION

136. CAST PLUG HEADER




SHEET 36 OF 59 OF 4

ISSUE

R0


136.1. WAUKESHA FOUNDRY INC., USA

137. CASTINGS TUBE SHEET / TUBE SUPPORTS

137.1. ARMALLOY LTD., UK

137.2. CRONITE EXPORT SERVICES, UK

137.3. DRAWINGS ALLOY CASTINGS, UK

137.4. DURALLOY TECHNOLOGIES, USA

137.5. FIAS S.R.L. ITALY

137.6. PARALLOY LTD., USA

137.7. POSE-MARRE EDELSTAHLWERK GMBH, GERMANY

137.8. WAUKESHA FOUNDRY INC., USA

137.9. KARTIK STEELS LTD., INDIA

137.10. HASTALLOY INDIA LTD., INDIA

ELECTRICAL

1. BATTERY -LEAD ACID

1.1. EXIDE, INDIA

1.2. AMCO, INDIA

1.3. HBL POWER SYSTEMS LTD., INDIA

1.4. AMAR RAJA, INDIA

2. BATTERY CHARGER

2.1. CHABBI ELECTRICAL PVT. LTD., INDIA

2.2. AUTOMATIC ELECTRIC LTD., INDIA

2.3. HBL POWER SYSTEMS LTD., INDIA

2.4. MASS-TECH , INDIA

2.5. UNI-INSTA,BANGALORE

3. BUSDUCTS - M.V.

3.1. INTRELEC- (M.V. ONLY), INDIA

3.2. INDUSTRIAL SWITCHGEAR & CONTROLS, INDIA

3.3. GLOBE ELECT. INDUSTRIES (MV ONLY), INDIA

3.4. UNITED ELECTRICALS, INDIA

3.5. STAR DRIVE, INDIA

3.6. L&T, INDIA

3.7. SIEMENS, INDIA

3.8. ELECHMECH, INDIA

3.9. ENPRO, INDIA

3.10. POWER CONTROL ENTERPRISES, INDIA

3.11. MANSHU COMTEL PVT. LTD.




SHEET 37 OF 59 OF 4

ISSUE

R0

ELECTRICAL

4. CABLES H.V. - 3.3 KV- 33 KV XLPE INSULATED

4.1. UNIVERSAL CABLES LTD., INDIA

4.2. NATIONAL INSULATED CABLE CO. OF INDIA LTD. (NICCO), INDIA

4.3. TORRENT CABLES LTD., INDIA

4.4. RPG CABLES LTD., INDIA

4.5. CABLE CORPORATION OF INDIA LTD, INDIA

4.6. KEI (KEI INDUSTRIES LIMITED) , INDIA

5. CABLES L.V.- POWER, CONTROL & EARTHING – PVC & XLPE INSULATED

5.1. UNIVERSAL CABLES LTD, INDIA

5.2. NATIONAL INSULATED CABLE CO.OF INDIA LTD.(NICCO), INDIA

5.3. KEI (KEI INDUSTRIES LIMITED), INDIA

5.4. RPG CABLES , INDIA

5.5. TORRENT CABLES LTD. , INDIA

5.6. CCI, INDIA

5.7. RADIANT CABLES, INDIA

5.8. BPCL CATEGORY(Cables LT)

5.9. POLYCAB PVT. LTD.

6. DISTRIBUTION BOARDS & MISC. FLAMEPROOF EQPT.(PLUG/ SOCKET, HANDLAMP ETC.) –

FLAMEPROOF & INCREASED SAFETY

6.1. BALIGA LIGHTING EQUIPMENT PVT. LTD., INDIA

6.2. FLEXPRO ELECTRICALS PVT. LTD., INDIA

6.3. FLAMEPROOF EQUIPMENT PVT. LTD., INDIA

6.4. FCG POWER INDUSTRIES P. LTD. , INDIA

6.5. FCG FLAMEPROOF CONTROL GEAR PVT. LTD., INDIA

7. FLAMEPROOF JUNCTION BOXES





7.5. SUDHIR SWITCHGEAR PVT. LTD. (APPROVED ONLY FOR JUNCTION BOX), INDIA


7.7. GEC Alstom (Areva) *

8. DISTRIBUTION BOARDS, LIGHTING PANEL & SMALL PANELS

8.1. ZENITH, INDIA

8.2. INTRELEC, INDIA

8.3. INDUSTRIAL SWITCHGEAR & CONTROLS, INDIA

8.4. M.K.ENGINEERS, INDIA


8.6. ELECHMECH, INDIA




SHEET 38 OF 59 OF 4

ISSUE

R0

ELECTRICAL

8.7. SCHNEIDER, INDIA

8.8. MANSHU COMTEL PVT. LTD.

9. FIRE ALARM SYSTEM

9.1. TYCO, INDIA

9.2. HONEYWELL AUTOMATION LTD., INDIA

9.3. GODREJ & BOYCE, INDIA

9.4. SIEMENS, INDIA

9.5. HONEYWELL FIRE SYSTEM, INDIA

9.6. NEW FIRE, INDIA

9.7. BPCL CATEGORY(Fire alarms)

9.8. MATHER PLATT

9.9. STEEL AGE-MMPC

10. GENERATORS, EMERGENCY DIESEL -UPTO 1600 KVA

10.1. POWERICA LTD., INDIA

10.2. SUPERNOVA, INDIA

10.3. STERLING WILSON , INDIA

10.4. TRACTORS INDIA LTD, INDIA

11. HEAT TRACING

11.1 RAYCHEM RPG LTD., INDIA

11.2 XYCON INDIA., INDIA

11.3 THERMOPADS PVT. LTD., INDIA

12. LIFTS – FLAMEPROOF

12.1. KONE , INDIA

12.2. THYSSENKRUPP ELEVATOR INDIA PVT. LTD. , INDIA

12.3. OTIS, INDIA

12.4. MASPERO, INDIA

12.5.

13. LIGHTING FIXTURES, – FLAMEPROOF & INCREASED SAFETY

13.1. BALIGA LIGHTING EQUIPMENT PVT.LTD., INDIA



13.4. FCG POWER INDIA LTD., INDIA


13.6. BPCL CATEGORY(Lighting Fixtures)

13.7. GEC Alstom (Areva) *

14. LIGHTING FIXTURES – INDUSTRIAL

14.1. WIPRO ELECTRICALS, INDIA




SHEET 39 OF 59 OF 4

ISSUE

R0

ELECTRICAL

14.2. BAJAJ ELECTRICALS, INDIA

14.3. CROMPTON GREAVES LTD., INDIA

14.4. PHILIPS , INDIA

15. LOCAL CONTROL STATIONS – FLAMEPROOF & INDUSTRIAL



15.3. FLAMEPROOF EQPTS. PVT. LTD., INDIA



16. SYNCHRONOUS MOTORS

16.1. ALSTOM MOTEURS SA, FRANCE

16.2. ANSALDO, ITALY

16.3. ABB LTD, FINLAND

16.4. FUJI ELECTRIC COMPANY LTD., JAPAN

16.5. HITACHI LTD (JAPAN), INDIA

16.6. JEUMONT ELECTRIC, FRANCE

16.7. PARSONS PEEBLES GENERATION LTD,

16.8. SIEMENS AG, GERMANY

16.9. TOSHIBA CORPORATION, JAPAN/ INDIA

16.10. MITSUBISHI, JAPAN

16.11. LOHER, GERMANY

17. MOTORS H.V. – 3.3KV TO 11KV – FLAMEPROOF & INCREASED SAFETY

17.1. BHEL, INDIA

17.2. CGL, INDIA


17.4. ABB, UK

17.5. ALSTOM, SWITZERLAND / FRANCE

17.6. SIEMENS, GERMANY



17.9. FUJI, JAPAN

17.10. BPCL Category (Motors HT EX - e / EX –n / Ex - d)

17.11. Alstom – UK

17.12. CEMP - Italy

18. MOTORS L.V.- INDUSTRIAL

18.1. SIEMENS LTD., INDIA

18.2. BHARAT BIJLEE LTD., INDIA

18.3. ASEA BROWN BOVERI LTD., INDIA




SHEET 40 OF 59 OF 4

ISSUE

R0

ELECTRICAL

18.4. CROMPTON GREAVES LTD, INDIA

18.5. MARATHON ELECTRIC MOTORS (INDIA) LTD. (FORMERLY ALSTOM LTD) , INDIA

18.6. BPCL VENDORS(Motors LT Non FLP Type)

18.7. BHEL

18.8. Ramiey (only upto 25 HP)

19. MOTORS L.V.- FLAMEPROOF & INCREASED SAFETY

19.1. SIEMENS LTD.- (ONLY INCREASED SAFETY), INDIA

19.2. BHARAT BIJLEE LTD., INDIA



19.5. RAMIEY (ONLY UPTO 25 HP),

19.6. MARATHON ELECTRIC MOTORS (INDIA) LTD. (FORMERLY ALSTOM LTD) , INDIA

19.7. SIEMENS LTD., GERMANY

19.8. CEMP, ITALY

19.9. ABB, SWITZERLAND/ UK


19.11. FUJI, JAPAN


19.13. BPCL category (Motors LT FLP, Increased Safety and Non FLP Type)

19.14. BHEL

19.15. ABB - India

20. MOTORS L.V.- FLAMEPROOF & GAS GROUP IIC


20.2. SIEMENS , GERMANY

20.3. VEM MOTORS, GERMANY


20.5. CEMP, ITALY

20.6. ABB, SWITZERLAND/ UK


20.8. FUJI, JAPAN

20.9. BPCL VENDORS(Motors LT FLP, Increased Safety and Non FLP Type)

20.10. BHARAT BIJLEE

20.11. BHEL

20.12. SIEMENS INDIA

20.13. ALSTOM INDIA (AREVA)

20.14. ABB INDIA

20.15. RAMIEY (ONLY UPTO 25 HP)

21. SOFT STARTERS

21.1. ROCKWELL AUTOMATION PVT LTD, INDIA




SHEET 41 OF 59 OF 4

ISSUE

R0

ELECTRICAL

21.2. ANSALDO ENERGIA SPA , ITALY

21.3. SIEMENS AG, GERMANY

21.4. ABB, INDIA

21.5. ALSTOM, USA

21.6. HITACHI, JAPAN

21.7. TOSHIBA CORPORATION, INDIA/ JAPAN

22. NEUTRAL GROUNDING RESISTORS

22.1. S.R. NARKHEDE ENGG. PVT. LTD., INDIA

22.2. AMP CONTROL EQUIPMENTS PVT. LTD., INDIA

22.3. RSI INDIA LTD, INDIA

22.4. RESITECH ELECTRICALS PVT. LTD. , INDIA

22.5. NATIONAL SWITCHGEAR, INDIA

22.6. BHARTIA INDUSTRIES, INDIA

22.7. INDUSTRIES SYNDICATE, INDIA

22.8. RSI Switchgear

23. PUBLIC ADDRESS SYSTEM –FLAMEPROOF

23.1. NEUMANN ELECTRONIC, THROUGH LARAON ENGG.PVT. LTD, GERMANY

23.2. INDUSTRONIC (INDUSTRIE-ELECTRONIC GMBH & CO. KG) , GERMANY

24. SWITCHGEAR L.V.- DRAWOUT TYPE (PCC/MCC/PMCC)


24.2. LARSEN & TOUBRO LTD., INDIA

24.3. GE POWER CONTROLS, INDIA

24.4. SCHNEIDER , INDIA

25. SWITCHGEAR H.V - 3.3KV TO 33KV – INDOOR TYPE


25.2. ASEA BROWN BOVERI LTD. (ABB), INDIA

25.3. AREVA T & D, INDIA

25.4. BHEL, INDIA

25.5. JYOTI, INDIA

26. TRANSFORMERS POWER & DISTRIBUTION - BELOW 33 KV

26.1. VOLTAMP TRANSFORMERS LTD, INDIA

26.2. EMCO LTD., INDIA

26.3. AREVA , INDIA

26.4. BHARAT BIJLEE, INDIA

26.5. CROMPTON, INDIA

26.6. BHEL, INDIA




SHEET 42 OF 59 OF 4

ISSUE

R0

ELECTRICAL

27. TRANSFORMER LIGHTING – DRY TYPE

27.1. VOLTAMP TRANSFORMERS LTD.- (RESIN IMPREGNATED), INDIA

27.2. INDCOIL- (VARNISH IMPREGNATED), INDIA

27.3. AUTOMATIC ELECTRIC LTD. , INDIA


27.5. BPCL category (Transformer Lighting (Upto 1 MVA))

27.6. Bharat Bijlee

27.7. Crompton Greaves

27.8. EMCO

27.9. Alstom India (Areva)

28. UNINTERRUPTED POWER SUPPLY

28.1. EMERSON NETWORK POWER (INDIA) PVT. LTD., INDIA

28.2. GENERAL ELECTRIC, INDIA

28.3. GUTOR, SWEDEN

28.4. FUJI ELECTRIC , JAPAN

29. VARIABLE FREQUENCY A.C. DRIVES

29.1. SIEMENS, INDIA

29.2. ALLEN BRADLEY (ROCKWELL AUTOMATION INDIA PVT. LTD.), INDIA

29.3. YASKAWA, JAPAN MAKE THROUGH LARSEN & TOUBRO LTD, JAPAN

29.4. ABB, INDIA

30. CCTV

30.1. SIEMENS , INDIA

30.2. NELCO, INDIA

30.3. TECHNOCRAT SECURITY SYSTEM, MUMBAI, INDIA

30.4. ECIL, INDIA

30.5. PHILIPS, INDIA

31. ELECTRICAL HEATERS

(VENDOR NAMES RECOMMENDED BY AXENS)

31.1. VULCANIC, FRANCE

31.2. CHROMALOX ETIREX, FRANCE

31.3. EXHEAT LTD, UK

32. CAPACITOR BANK

32.1. UNIVERSAL CABLES, INDIA

32.2. BHEL, INDIA

32.3. ABB, INDIA

32.4. MADHAV CAPACITORS, INDIA

32.5. SHREEM




SHEET 43 OF 59 OF 4

ISSUE

R0

ELECTRICAL

33. ENERGY SAVER SYSTEM (LIGHTING TRANSFORMERS)

33.1. PRITHVI TECHNOLOGIES PVT. LTD.

33.2. BEBLEC (INDIA) PRIVATE LIMITED

33.3. SCHNEIDER ELECTRIC INDIA PVT. LTD. (CONZERVE)

34. CABLE TRAYS

34.1. INDIANA CABLE TRAYS CORPORATION

34.2. PROFAB ENGINEERS

34.3. ANAND UDYOG

34.4. METAL ALEMMS BOMBAY PVT. LTD.

34.5. SUPERFAB ENGINEERS

34.6. RAMAKANT METAL INDUSTRIES

34.7. M.M. ENGINEERING WORKS

34.8. GLOBE ELECTRICAL INDUSTRIES (FOR GI ONLY)

35. CABLES – COMMUNICATION SYSTEM

35.1. CMI LTD

35.2. DELTON CABLES LTD

35.3. KEI INDIA LTD

35.4. RELIANCE ENGINEERS LTD

35.5. VINDHYA TELELINKS LTD

35.6. ELKAY TELELINKS LTD

35.7. FINOLEX CABLES LTD

35.8. RPG CABLES LTD

35.9. USHA BELTRON LTD

36. TELEPHONE SYSTEM

36.1. SIEMENS LTD

36.2. TATA TELECOM LTD

36.3. BPL TELECOM LTD

37. HIGH LIGHT MAST

37.1. BAJAJ

37.2. LYSAUGHT

37.3. AL-BABTAIN

37.4. CU LIGHTING

37.5. CROMPTON

37.6. PHILIPS

37.7. CHASMITHA ENGG, BARODA

38. INSTALLATION CONTRACTORS FOR CATHODIC PROTECTION SYSTEM




SHEET 44 OF 59 OF 4

ISSUE

R0

ELECTRICAL

38.1. CORROSION TECHNOLOGY SERVICES INDIA (P) LIMITED

38.2. RAYCHEM RPG LIMITED, NEW DELHI

38.3. CORRECTECH INTERNATIONAL PVT. LTD. - INDIA

38.4. CORROSION CONTROL SERVICES PVT. LTD. - INDIA

38.5. RAYCHEM - USA

39. ISOLATORS / LOAD BREAK SWITCHES (HV INDOOR)

39.1. DRIESCHER PANICKKERS SWITCHGEAR LTD - INDIA

39.2. SIEMENS LTD - INDIA

40. PVC INSULATING MATS

40.1. RMG POLYVINYL INDIA LTD

40.2. D. L. MILLAR & CO. LTD

40.3. 1000 PLUS TRADE INC

40.4. COMMERCIAL ENTERPRISES

40.5. PREMIER POLYFILM LTD

40.6. TATA RUBBER CORPORATION

INSTRUMENTATION

1. AIR FILTER REGULATORS

1.1. PLACKA INSTUMENTS & CONTROLS (P) LTD., CHENNAI

1.2. VELHAN HYDRAIR PVT. LTD., CHENNAI

1.3. FISHER XOMOX

1.4. HYDROPNEUMATICS., MUMBAI

1.5. ODIN INDIA PVT. LTD., CHENNAI

2. THERMO COUPLE EXTN. CABLES

2.1. UNIVERSAL CABLES LTD.,MUMBAI

2.2. ASSOCIATED FLEXIBLES AND WIRES (P) LTD. MUMBAI

2.3. K E I INDUSTRIES LIMITED , ALWAR

2.4. THERMOCABLES LTD. , MUMBAI

2.5. UDAY PYROCABLES PVT. LTD., MUMBAI

2.6. CORDS CABLE INDUSTRIES PVT. LTD., ALWAR

3. INSTRUMENTATION CABLES

3.1. ASSOCIATED FLEXIBLES AND WIRES (P) LTD

3.2. K E I INDUSTRIES LIMITED

3.3. UDAY PYROCABLES PVT. LTD., MUMBAI

3.4. UNIVERSAL CABLES LTD., MUMBAI

3.5. NICCO COPPORATION LTD., MUMBAI

3.6. POLYCAB WIRES PVT. LTD., MUMBAI

3.7. RADIANT CABLES LTD., HYDERABAD.

3.8. BROOKS CABLES WORKS., MUMBAI




SHEET 45 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

3.9. THERMOCABLES LTD. , MUMBAI

4. FOUNDATION FIELDBUS CABLES

4.1. BELDEN CABLES.

4.2. HALUKABEL

4.3. KERPEN CABLES

4.4. LAPP CABLES

5. FOUNDATION FIELDBUS JUNCTION BOXES.

5.1. P& F

5.2. MTL

6. COPPER TUBE

6.1. ALCOBEX METALS(P) LTD

6.2. RAJCO METAL INDUSTRIES PVT. LTD

6.3. INDUSTRIAL TUBES

6.4. MULTIMETALS LTD.

6.5. UDEY PYROCABLES PVT. LTD., MUMBAI

7. SS TUBES.

7.1. RAJENDRA MECHANICAL INDUSTRIES LTD.

7.2. SANDVIK ASIA LIMITED (IMPORTED FOR HIGH PR, TEMP., & VIBRATION)

7.3. RATNAMANI METALS & TUBES

7.4. HEAVY METALS & TUBES, MEHSANA

7.5. JINDAL SAW LTD.

7.6. SAW PIPES LTD., NASHIK

7.7. CHOKSI TUBE CO.

8. ORIFICE PLATES & FLANGES

8.1. BALIGA LIGHTING EQUIPMENTS LTD.

8.2. MICRO PRECISION PRODUCTS PVT. LTD. HARYANA

8.3. HYDROPNEUMATICS, MUMBAI

8.4. GENERAL INSTRUMENT CONSORTIUM

8.5. GURUNANAK ENGG. WORKS, KOTA RAJASTHAN


8.7. MINCO INDIA PVT. LTD., GOA

8.8. STAR-MECH CONTROLS (i) PVT. LTD., PUNE

8.9. TEMP-TECH., MUMBAI

9. TEMP. ELEMENTS, THERMOWELL

9.1. GENRAL INSTRUMENTS CONSORTIUM

9.2. TEMP-TECH

9.3. PYROELECTRIC INSTRUMENTS GOA PVT. LTD.

9.4. DETRIV INSTRUMENTS & ELECTRONICS LTD.




SHEET 46 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

9.5. ALTOP CONTROLS

9.6. ELETRICAL & ELETRONICS CORPORATION

9.7. AN INSTRUMENTS PVT. LTD.

9.8. WAAREE INSTRUMENTS, MUMBAI

9.9. WIKA INSTRUMENTS INDIA PVT. LTD.

9.10. WALCHANDNAGAR INDUSTRIES

9.11. ASHCROFT INDIA PVT. LTD.

10. FLEXIBLE THERMOCOUPLES (FOR REACTOR & REGENERATION BED TEMPERATURE)

10.1. VULCANIC S. A. – FRANCE

10.2. DAILY THERMETRICS – USA ( only for Unit #140-NHT)

11. PLC FOR PACKAGE UNITS (ONLY IF SPECIFIED IN PACKAGE UNIT)

11.1. ALLEN BRADLEY

11.2. SIEMENS LTD.

11.3. MODICON

11.4. GE FANUC

11.5. L & T (HIMA)

12. PRESSURE GAUGES



12.3. PYRO ELECTRIC INSTRUMENTS INDIA PVT. LTD.

12.4. A.N. INSTRUMENTS PVT. LTD.



12.7. WAREE INSTRUMENTS

12.8. MANOMETER INDIA PVT. LTD.

12.9. WALCHANDNAGAR INDUSTRIES LTD. (TIWAC DIV)

13. SPECIAL THERMOCOUPLES ( FOR REACTOR & REGENERATOR SKIN THERMOCOUPLES)

13.1. THERMOCOUPLE PRODUCTS CO.- USA

13.2. TECHNOMATIC SPA - ITALY

13.3. THERMO ELECTRIC - USA

13.4. VULVANIC S.A.

13.5. DAILY THERMETRICS

13.6. GAYESCO

13.7. BPCL CATEGORY (THERMOCOUPLE/THERMOWELL/RTD)

13.8. GENERAL INST. CORPN.

13.9. PYRO ELECTRIC INSTRUMENTS GOA

13.10. TEMP-TECH

13.11. ALTOP CONTROLS

13.12. DETRIV INSTRUMENTATION & ELECTRO

13.13. ELECTRICAL & ELECTRONICS CORPN.




SHEET 47 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

14. SPECIAL THERMOCOUPLES ( FOR HEATER SKIN THERMOCOUPLES)

14.1. THERMOCOUPLE PRODUCTS CO.- USA

14.2. TECHNOMATIC SPA - ITALY

14.3. THERMO ELECTRIC - USA

14.4. PYROELECTRIC INSTRUMENTS GOA PVT. LTD. – INDIA (ONLY FOR HEATER SKIN)

14.5. GENERAL INSTRUMENTS INDIA

14.6. DETRIV INSTRUMENTS & ELECTRONICS INDIA

14.7. VULVANIC S.A.

14.8. DAILY THERMETRICS

14.9. GAYESCO

14.10. BPCL CATEGORY (THERMOCOUPLE/THERMOWELL/RTD)

14.11. TEMP-TECH

14.12. ALTOP CONTROLS

14.13. ELECTRICAL & ELECTRONICS CORPN.

15. TEMP. GAUGES (BI METALLIC/ DIAL TYPE)



15.3. PYRO ELECTRIC INSTRUMENTS GOA PVT. LTD

15.4. FORBES MARSHAL .

15.5. TEMP-TECH


15.7. WAREE INSTRUMENT

15.8. AN INSTRUMENTS PVT. LTD.

16. ROTAMETER (GLASS TUBE & PURGE TYPE)

16.1. EUREKA INDL. EQUIP (P) LTD

16.2. INSTRUMENTATION ENGINEERS (P) LTD

16.3. TRANSDUCERS & CONTROL PVT. LTD


16.5. BROOKS INSTRUMENTS

16.6. YOKOGAWA INDIA LTD.

16.7. BLUE START LTD

17. ROTAMETER (TRANSMITTERS)

17.1. KROHNEMESSTECHNIC GHBM & CO. KG. GERMANY

17.2. TRANSSDUCERS & CONTROL PVT LTD

17.3. YOKOGAWA INDIA LTD., MUMBAI

18. ROTAMETER (METAL TUBE)


18.2. INSTRUMENTATION ENGINEERS (P) LTD

18.3. KHRONE MARHALL.




SHEET 48 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

18.4. TRAC (TRANSDUCERS & CONTROL PVT. LTD), HYDERABAD

18.5. BROOKS INSTRUMENTS., MUMBAI

19. ROTAMETERS (LIQUID, GAS, HIGH TEMP. CORROSIVE HANDLING)

19.1. FLUIDYNE INSTRUMENTS PVT. LTD

20. MANOMETERS (U TUBE WATER MANOMETER)

20.1. FUIDYNE INSTRUMENTS PVT. LTD.

21. GAUGE GLASSES (LEVEL GAUGES)

21.1. BLISS ANAND PVT. LTD

21.2. CHEMTROL ENGG (P) LTD

21.3. LEVCON INSTRUMENTS PVT. LTD

21.4. PROTOLINA INSTRUMENTS PVT. LTD.

21.5. TECHNOMATIC INDIA PVT. LTD.

21.6. HYDROPNEUMATICS., MUMBAI

22. GAUGE GLASSES

22.1. AMAR TRADING CO

22.2. GUJARAT MILL STORES CO

22.3. UNIKLILNGER LTD

22.4. VINAYAK HARDWARE MART

23. MAGNETIC LEVEL GAUGES


23.2. WIKA INSTRUMENTS INDIA PVT. LTD. (KSR KUEBLER)

23.3. KROHNE MESS TECHNIC GMBH.

23.4. MAGNETROL INTERNATIONAL NV.

23.5. NHON KLINGAGE CO. LTD.

24. LEVEL SWITCHES (DISPLACER / FLOAT)

24.1. TOKYO KEISO CO. LTD.

24.2. SOR INC. USA

24.3. MAGNETROLINTERNATIONAL N.V. BELGIUM

24.4. CHEMTROLS ENGG. PVT. LTD. (ECKHARD MAKE)

25. DISPLACER LEVEL TRANSMITTERS

25.1. DRESSER MASONEILAN.

25.2. FISHERROSEMOUNT PTE, SINGAPORE.

25.3. MAGNETROL INTERNATIONAL INC.

25.4. CHEMTROLS ENGG. PVT. LTD. (ECKHARD MAKE)

26. PRESSURE SWITCHES




SHEET 49 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

26.1. CUSTOM CONTROL SENSOR INC.

26.2. CHEMTROLS (UNITED CONTROL, USA MAKE)

26.3. SWITZER INSTRUMENTS LTD

26.4. DRESSER INC.

26.5. SHERMAN INTERNATIONAL PVT. LTD.

26.6. DWYER (WAREE), MUMBAI


26.8. INDFOS IND. LTD.

27. DRAFT GAUGES

27.1. SWITZER INSTRUMENT LTD

27.2. GENERAL INSTRUMENTS CONSORTIUM

27.3. WAREE INSTRUMENTS

27.4. AN INDUSTRIES PVT. LTD.

28. HC DETECTOR PORTABLE

28.1. JOSEPH LESLIE DRAGER.

28.2. HONEYWELL LIFE SAFETY

28.3. GENERAL MONITORS IRELAND LTD / CHEMTROLS

28.4. TRITECH (RIKEN KEIKE)

28.5. BW TECHNOLOGY

29. HC / H2S / H2 DETECTOR

29.1. DETECTOR ELECTRONICS CORPORATION

29.2. JOSEPH LESLIE DRAGER.

29.3. GENERAL MONITORS IRELAND LTD / CHEMTROLS

29.4. HONEYWELL LIFE SAFETY

29.5. DIETERICH STANDARDS

30. JUNCTION BOXES AND CABLE GLANDS (FLAME PROOF)

30.1. BALIGA LIGHTING EQUIPMENTS LTIMITED

30.2. FLAMEPROOF EQUIPMENTS PVT. LTD

30.3. SUDHIR SWITCHGEARS PVT. LTD

30.4. CEAG FLAMEPROOF CONTROL GEARS (P) LTD

30.5. FLEXPRO ELECTRICALS PVT. LTD.

30.6. EX-PROTECTA

30.7. FCG

31. COMPRESSION FITTINGS ( BRASS FITTINGS FOR COPPER TUBE)

31.1. ASTEC INSTRUMENTS PVT. LTD.

31.2. FLUID CONTROL PVT LTD

31.3. EXCELL HYDRO

32. INSTRUMENT VALVES




SHEET 50 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

32.1. ASTEC INSTRUMENTS PVT. LTD

32.2. EXCELL HYDRO PNEUMATICS PVT. LTD

32.3. FLUID CONTROL

32.4. BOMBAY FLUID SYSTEM COMPONENTS

32.5. MAHESHWARI ENGG WORKS (PARKER, SWAGE LOCK ONLY)

32.6. SUPER TECHNICAL INDIA PVT LTD

32.7. PARKER HANNIFIN INDIA PVT LTD

33. FITTINGS: SS TUBE FITTINGS (PROCESS IMPULDE LINES)

33.1. SWAGELOK MAKE-(BOMBAY FLUID SYSTEM COMPONENTS (P) LTD)

33.2. PARKER MAKE- (SUPER TECHNICAL (I) PVT. LTD.)

34. CONTROL VALVES – (SPECIAL PURPOSE ONLY)

34.1. FLOWSERVE

34.2. ARCA REGLER GMBH, GERMANY

34.3. DRESSER VALVES INDIA

34.4. SAMSON AG, GERMANY

34.5. SICAL YAMATAKA LTD

34.6. HOPKINSONS LTD. UK

34.7. MOTOYAMA ENGINEERING WORKS. TOKYO

34.8. METSO AUTOMATION (NELES) , GURGAON

34.9. NUOVO PIGNONE. ITELY

34.10. TYCO

34.11. INSTRUMENTATION LTD., PALAKKAD

34.12. EMERSON PROCESS CONTROL, SINGAPORE

35. CONTROL VALVES- GLOBE VALVES

35.1. INSTRUMENTATION LTD. PALGHAT

35.2. DRESSER VALVES INDIA LTD.

35.3. FISHER SANMAR LTD.

35.4. SAMSON CONTROL PVT. LTD.

35.5. FLOWSERVE INDIA CONTROLS

36. CONTROL VALVES- BUTTERFLY BODY

36.1. FLOWSERVE PTE LTD. INDIA

36.2. TYCO

36.3. SAMSON AG, GERMANY.

36.4. METSO

37. CONTROL VALVES (ANGLE)( SPECIAL APPLICATION ONLY)

37.1. SAMSON AG - GERMANY

37.2. MOTOYAMA - JAPAN

37.3. FLOWSERVE (SEREG-VANES) - FRANCE

37.4. DRESSER PRODUCTS - FRANCE




SHEET 51 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

37.5. ARCA - GERMANY

37.6. METSO AUTOMATION PTE LTD – SINGAPORE / INDIA

38. ON –OFF VALVES (PLUG )( SPECIAL APPLICATION ONLY)

38.1. DRESSER ITALIA - ITALY

38.2. FLOWSERVE PTE. LTD - SINGAPORE

38.3. TUFLIN - USA

38.4. SPX VALVES & CONTROLS

39. CONTROL VALVE - BALL VALVES (INDIAN) – ON/OFF APPLICATION

39.1. EL-O-MATIC (INDIA) PVT. LTD.

39.2. VIRGO ENGINEERS LIMITED

39.3. MICROFINISH VALVES LTD.

39.4. BDK VALVES

39.5. TYCO VALVES

39.6. KOSO FLUID CONTROLS

40. CONTROL VALVE - BALL VALVES (IMPORTED) - ON/OFF APPLICATION

40.1. TYCO VALVES

40.2. KOSO FLUID CONTROLS

40.3. NUOVO VALVES

40.4. WIER VALVES

40.5. KITAMURA VALVES MANUFACTURING LTD

40.6. METSO

40.7. PIBIVIESSE SPA MILANO ITALY

41. ON –OFF VALVES (GATE)(SPECIAL APPLICATION ONLY)

41.1. HOPKINSONS LTD -

41.2. COOPER CAMERON - SINGAPORE

41.3. SPX VALVES & CONTROLS

42. ROTARY PLUG CONTROL VALVE

42.1. DRESSER VALVES INDIA

42.2. FISHER SANMAR LTD

42.3. INSTRUMENTATION LTD

42.4. SAMSON CONTROLS PVT. LTD. (VETEC)

43. CONTROL VALVE: SMART POITIONERS

43.1. DRESSER VALVE INDIA PVT. LTD.

43.2. FISHER SANMAR

43.3. METSO (NELES AUTOMATION PTE LTD.)

43.4. SIEMENS LTD.

44. PRESSURE CONTROL VALVES (SELF ACTUATED)




SHEET 52 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

44.1. FISHER SANMAR LTD.


44.3. SAMSON AG MESS-UND REGEL TECHNIK, GERMANY

44.4. RICHARD INDUSTRIES (JORDAN VALVES)

45. FIELD INSTRUMENTS ( PT/DP, TEMPERATURE TRANSMITTERS)

45.1. FUJI ELECTRIC CORPN.

45.2. EMERSION PROCESS MANAGEMENT

45.3. HONEYWELL AUTOMATION INDIA LTD


45.5. ABB LTD. FARIDABAD

46. FLOW ELEMENTS (VENTURI, FLOW NOZZLES)

46.1. MICRO PRECISION PRODUCTS PVT LTD

46.2. STAR MECH CONTOLS PVT. LTD

46.3. DANIEL - USA

47. AVERAGING PITOT TUBES

47.1. TORBAR FLOWMETERS LTD.

47.2. EMERSON PROCESS MANAGEMENT INDIA PVT LTD (DIETERICH STANDARD INC )

47.3. STARMECH CONTROL INDIA PVT LTD

47.4. TECHNOMATICS

47.5. TOKYOKEISO CO. LTD

47.6. BRANDT INSTRUMENTS INC

47.7. AUXITROL S.A.

47.8. VERIS INC

48. MASS FLOW METERS

48.1. EMERSON PROCESS MANAGEMENT INDIA PVT. LTD.

48.2. ENDRESS + HAUSER INDIA PVT. LTD.

48.3. YOKOGAWA

48.4. BOPP & REUTHER MESSTECHNIK GMBH

48.5. RHEONKE MEGERATE GMBH

48.6. BROOKS INSTRUMENTS

49. VORTEX FLOW METER

49.1. KROHNE MARSHAL LTD.

49.2. YOKOGAWA ELECTRIC CORP (Other than High Temp. H2 Services)

49.3. EMERSON

49.4. ENDRESS AND HAUSER INDIA PVT. LTD.

49.5. INVENSYS

50. ULTRASONIC FLOW METER (FOR FLARE)

50.1. PANAMETRIS LTD, IRELAND .




SHEET 53 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

50.2. GE SENSING (PANAMETRICS INC.)

51. MAGNETIC FLOWMETERS

51.1. ENDRESS & HAUSER (INDIA) PVT. LTD.

51.2. FORBES MARSHALL LTD.


51.4. EMERSON

51.5. INVENSYS

52. STACK ANALYSER SYSTEM (SOX, NOX, CO ANALYSER)

52.1. AMETEK- PTSBURGH, PA.

52.2. HORIBA INSTRUMENTS (S)PTE LTD. SINGAPORE.

52.3. THERMO ENVIRONMENTAL INSTRUMENT- MUMBAI .

52.4. MAIHAK AG -HAMBURG


52.6. TELEDYNE INSTRUMENTS-USA

53. NIR ANALYSER

53.1. GUIDEDWAVE INC. - USA

53.2. YOKOGAWA ELECTRICAL CORPORATION - JAPAN

53.3. INVENSYS

53.4. ABB AUTOMATION - UK

53.5. HAMILTON SUNDSTRAND UG. - USA

54. ASTM ANALYSER

54.1. BENKE - GERMANY

54.2. PRECISION SCIENTIFIC - USA

54.3. ABB - UK

54.4. BARTEC - GERMANY

54.5. PAC - USA

55. PH / CONDUCTIVITY ANALYSERS

55.1. YOKOGAWA INDIA LIMITED.


55.3. ABB LTD.

55.4. HORIBA INSTRUMENTS PVT. LTD.

56. SULPHUR / H2S ANALYSER

56.1. HOUSTON ATLAS INC. – KINGWOOD

56.2. AMETEK - USA / EQUIVALENT IMPORTED

56.3. METOREX INTERNATIONAL OY- FINLAND

56.4. AZOMA (CHEMTROL, MUMBAI)

56.5. THERMOFISHER

56.6. ANTEK SOUTH YORKSHIRE




SHEET 54 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

56.7. THERMOELECTRIC CORPORATION

56.8. BOVER (CHEMTROL)

57. SPECIFIC GRAVITY ANALYSER

57.1. SOLATRON - UK

57.2. YOKOGAWA INDIA LTD. - INDIA / JAPAN

57.3. EMERSON PROCESS MGT, SINGAPORE PTE. - SINGAPORE

57.4. THERMOFISHER

57.5. BOPP & REUTHER

58. ANALYSERS OXYGEN (ZIRCONIA)

58.1. ANALYZER INSTRUMENTS CO PVT. LTD. (FUJI – JAPAN)

58.2. EMERSON PROCESSMANAGEMENT INDIA PVT. LTD


58.4. CHEMTROLS INDUSTRIES LIMITED (AMETEK - USA)

59. ANALYSERS OXYGEN

59.1. GE SENSING

59.2. SIEMENS - GERMANY

59.3. HARTMANN-BRAUN / ELSAG BAILEY - UK

59.4. SERVOMAX INTERNATIONAL - UK

60. H2 ANALYZERS

60.1. HONEYWELL - USA

60.2. SIEMENS - GERMANY

60.3. EMERSON

61. MOISTURE ANALYSER

61.1. AMETEK - USA

61.2. ARELCO - FRANCE

61.3. ENDRESS & HAUSER - SWITZERLAND

61.4. GE INDUSTRIAL SENSING – USA

61.5. PANAMETRICS

62. GAS CHROMATOGRAPH

62.1. ABB AUTOMATION - UK/USA

62.2. SIEMENS APPLIED AUTOMATION INC. - USA

62.3. YOKAGAWA ELECTRIC CORPORATION - JAPAN

62.4. FOXBRO, MUMBAI

63. NUCLEONIC LEVEL INSTRUMENTS

63.1. BERTHOLD - FRANCE

64. RADAR TYPE LEVEL INSTRUMENS (STORAGE TANKS)




SHEET 55 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

64.1. ENRAF BV

64.2. SAAB TANK CONTROL (SAAB MARINE ELECTRONICS AB) -

65. RADAR LEVEL TRANSMITTER PROCESS VESSELS (INCL OF GUIDED WAVE RADAR )

65.1. ENRAF B.V.

65.2. ENDRESS + HAUSER

65.3. MAGNETROL INTERNATIONAL INC.

65.4. EMERSON PROCESS CONTROLS, MUMBAI

65.5. WIKA (VEGA)

66. I/P AND P/I CONVERTERS



66.3. HONEYWELL AUTOMATION INDIA LTD.

66.4. MTL INDIA PVT. LTD.

66.5. ABB LTD.

66.6. YAMATAKE

66.7. DRESSER PRODUCTS

67. ANTI SURGE / PERFORMANCE CONTROLLER

67.1. CCC - USA

68. SAFETY BARRIERS & MULTI CHANNEL FF TEMPERATURE TRANSNITTERS

68.1. P & F

68.2. MTL (5000 SERIES)

68.3. STAHL, CHENNAI

68.4. TURCK (FIELD BUS)

69. SOLENOID VALVES

69.1. ASCO

69.2. HERION / NORGEN, INDIA

70. VIBRATION MONITORING SYSTEM

70.1. BENTLY NEVADA CORPORATION –(3500 Series) - MINDEN USA

70.2. SHINKAWA (ONLY FOR PUMPS)

71. FLAME SCANNER

71.1. DIETERICH STANDARD INC- COLORADO

71.2. E2 TECHNOLOGY CORPORATION- USA

71.3. HONEYWELL AUTOMATION INDIA LTD

71.4. DETRONICS, MINNEAPOLIS

71.5. UVISOR, ITALY

72. LOCAL CONTROL PANEL




SHEET 56 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

72.1. INDUSTRIAL CONTROLS & APPLIENCES

72.2. PYROTECH ELECTRONICS PVT LTD

72.3. ECIL HYDERABAD

72.4. RITTAL.

72.5. SUNLEET CONTROLS (ONLY FOR MODIFICATION)

72.6. HONEYWELL AUTOMATION INDIA LTD.'


73. ALARM ANNUNICATOR ( LOCAL PANEL ACCESSORIES)

73.1. DIGICONT

73.2. INDUSTRIAL INSTRUMENTS & CONTROLS

73.3. PROCON INST. (P) LTD

73.4. MTL INDIA PVT. LTD.

73.5. ROCHESTER INSTRUMENTS SYSTEM LTD.

73.6. IDECIZUMI

74. TERMINAL BLOCKS

74.1. PHOENIX GERMANY

74.2. WAGO

75. MULTIPLE CABLE TRANSIT (MCT)

75.1. BRATTBERG

75.2. ROXTEC

76. PRESSURE REDUCING & DE-SUPERHEATING SYSTEM.

76.1. FORBES MARSHALL LTD.

76.2. MAZADA LIMITED

76.3. FISHER SANMAR LIMITED.

76.4. SPX PROCESS EQUIPMENTS (COPES VULCAN)

76.5. CCI

77. ANALYZER SHELTERS.

77.1. ABB INSTRUMENTATION UK.


77.3. EMERSON PROCESS MANAGEMENT (I) PVT. LTD

77.4. YOKOGAWA INDIA LTD

78. SPECIAL GAS TIGHT VALVES

78.1. PEROLO – FRANCE

78.2. SEGAULT – FRANCE

79. SPECIAL CATALYST TIGHT VALVES

79.1. GUICHON VALVES – FRANCE




SHEET 57 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

80. CONTROLLER: INDICATING ( ELECTRONIC / RECORDER)

80.1. CHINO-LAXSONS (INDIA) LIMITED

80.2. HONEYWELL AUTOMATION INDIA LTD.


81. LIMIT SWITCHES (PROXIMITY TYPE- IMPORTED)

81.1. MTL

81.2. P&F

82. RELAYS (WITH LED)

82.1. JYOTI

82.2. OMRON JAPAN

83. TURBINE FLOWMETER

83.1. BROOKS INSTRUMENTS, USA

83.2. EMERSON PROCESS CONTROL

83.3. FMS SANMAR LTD

83.4. KROHNE MARSHALL

83.5. ROCKWIN

84. REGULATORS (GAS)

84.1. INDIAN OXYGEN LTD

84.2. SPAN GAS & EQUIPMENT PVT LTD

84.3. SPECIALITY GAS CO PVT LTD

85. SCANNER (TEMP. MONITORS)

85.1. BENTLEY NAVADA CORPORATION

85.2. HONEYWELL PVT LTD

85.3. YOKOGAWA INDIA LTD

86. ANALYSERS CYLINDER PRESSURE REGULATORS

86.1. HORNBILL EQUIPMENTS PVT LTD

86.2. INDIAN OXYGEN LTD

86.3. INOX AIR PRODUCTS LTD

86.4. ESAB MUMBAI

86.5. HYDROGAS MUMBAI

87. ANALYSERS - GLC ANALYSER

87.1. SIEMENS LTD (APPLIED AUTOMATION PVT LTD)

87.2. FOXBORO MUMBAI

87.3. YOKOGAWA ELECTRIC CORPORATION JAPAN

88. OIL TRACE ANALYSER

88.1. TELEDYNE ANALYTICAL INSTRUMENTS USA

88.2. SERES ZI FRANCE

88.3. BRISTOL BABCOCK LTD UK




SHEET 58 OF 59 OF 4

ISSUE

R0

INSTRUMENTATION

89. METHANE ANALYSER

89.1. ABB

89.2. SICK MAIHAK (CHEMTROLS)

89.3. EMERSON

89.4. SIEMENS

90. ONLINE CORROSION MONITORING

90.1. HONEYWELL AUTOMATION (INTERCORR, USA)

90.2. MAKSUR ANALYTICAL SYSTEMS (ROHRBACK COSASCO, USA)

90.3. INTERCORR INTERNATIONAL (M/s HONEYWELL)

90.4. ADVANCE TECH CONTROLS PVT. LTD. (CORMON)

90.5. INDUS ENGINEERS PVT. LTD. (CORROCEAN)

90.6. METAL SAMPLES COMPANY

LIST OF APPROVED TRADERS FOR URGENT DELIVERY (TIE-IN POINT ETC.)

1. PIPES, FITTINGS AND FLANGES

1 KWALITY TUBES

2 METAL INDIA

3 ARISTO METAL INDUSTRIES

4. ARDH METAL AGENCY

5. FIT TECH INDUSTRIES PVT LTD

6. NILESH METAL COMPANY

7. HIND METAL SYNDICATE PVT LTD

8. VENUS TRADING COMPANY

9 SADAF TRADING COMPANY

10. HI-TECH METALS AND TUBES

2. GASKETS

1. SUPER GASKET INDUSTRIES

2. UNIQUE INDUSTRIAL PACKINGS

3. UNI-KLINGER LIMITED

3. FASTENERS

1. J J INDUSTRIES

2. SYNDICATE ENGINEERING INDUSTRIES

3. MEGA ENGINEERING PVT LTD

4. VALVES

1. SANJAY TRADING CORPORATION

2. Y K ENTERPRISES

3. UNITED TRADING AGENCY

4. CRS MARKETING & SERVICES

5. PIPES

1. SADAF TRADING COMPANY

2. VENUS TRADING COMPANY

3. N-PIPE SOLUTIONS INC.

4. EVERGREEN SEAMLESS PIPES AND TUBES PVT LTD

5. HIND METAL SYNDICATE PVT LTD

6. HI-TECH METALS AND TUBES




SHEET 59 OF 59 OF 4

ISSUE

R0

7. KWALITY TUBES

8. CHANDAN STEEL LTD





SHEET 1 OF 6 OF 4

ISSUE R1

Bidder’s Name: ________________________________

Enquiry No.: ________________________________

Bidder’s Offer Ref.: ________________________________

Tel. No.: _____________________Mobile No.:________________

Fax No.: ____________________

Contact Person: _____________________E-mail:____________________

1. Duly signed & stamped copies of this “questionnaire”, with all the clauses duly confirmed/ precisely replied to by the Bidder, shall be enclosed with each and every set of Bidder’s un-priced quotation

2. Failure on the part of Bidder in not returning this duly filled-up

“questionnaire with all the sets of un-priced quotation and/or submitting

incomplete replies may lead to rejection of Bidder’s quotation”.

Sr. No.

Description Bidder’s Confirmation

1 Bid rejection criteria:

Bidders shall note the bid rejection criteria as indicated in ITB. Provisions of these clauses must be adhered to without any deviations, failing which the bid shall be considered to be non-responsive and may be rejected.

Noted

2 Bid Validity period: Confirm Offer validity of Four Months from final bid due date.

Confirmed / Not Confirmed

Refer deviation sheet

Validity: ___ Months from bid due date.

3 Defects Liability Period: Confirm acceptance of defect liability period clause as indicated in Special Purchase Conditions.

Noted & Confirmed

4 Performance Bank Guarantee: Confirm acceptance of performance guarantee clause as indicated in Special Purchase Conditions & General Purchase Conditions.

Noted & Confirmed

5 Time Schedule - Delivery Period

Indicate approximate sailing period from port of exit to port of destination.

Noted & Confirmed

Approximate sailing period from port of exit (specify)_____________ to

port of Destination:________





SHEET 2 OF 6 OF 4

ISSUE R1

Sr. No.


6 Technical and Commercial Loading: Bidders shall note loading criteria as mentioned in the Special Purchase Conditions (SPC)

Noted

7 Payment Terms: Confirm acceptance of payment terms as indicated in “Terms of Payment”.

Accepted / Not accepted refer deviation sheet

8 Firmness of prices: Quoted prices shall remain firm and fixed till complete execution of the order.

Noted & confirmed

9 Price Basis: FOB Port of Shipment Confirmed

10 FOB Charges Included

11 Packing & Forwarding charges up to FOB shall be included in quoted price

Confirmed

12 Force Majeure Clause :

Confirm acceptance of Force Majeure Clause as indicated in General Purchase Conditions (GPC).

Noted & Confirmed

13 Arbitration Clause:

Confirm acceptance of Arbitration Clause as indicated in General Purchase Conditions (GPC).

Noted & Confirmed

14 Delayed Delivery:

Confirm acceptance of Delayed Delivery Clause as indicated in Special Purchase Conditions (SPC).


15 Confirm that the prices have been furnished as per “Format For Submitting Price” indicated in Schedule of Price

Noted & Confirmed

16 Bank Charges: All Bank charges and stamp duties payable outside India in connection with payments to be made shall be borne by the supplier. All bank charges and stamp duties payable in India shall be borne by BPCL

Confirmed

17 Currency of Quote:

Furnish the currency of quote.

Currency of Quote:

US $

18 Change in currency once quoted will not be allowed. Noted & accepted





SHEET 3 OF 6 OF 4

ISSUE R1

Sr. No.


19 Indicate name, address, telephone nos., fax nos., e-mail address of your Banker for L/C opening

20 Documentation charges are included in quoted prices. Confirmed

21 Customer references list for the item/ model quoted by you is given in offer.

Confirmed

22 Confirm complete technical literature/catalogue are submitted along with each copy of the offer.

Confirmed

23 Indicate manufacturer’s name and address:

24

Country of Origin:

Indicate country of origin from where the goods have been offered.

25 Indicate mode of shipment Sea / Air

26 Indicate International Port of Exit. Material shall be dispatched from :

Country:

27 Indicate approximate shipping weight (net and gross) & volume of the consignment.

Approximate shipping weight:

Volume:

28 Date of clean Bill of Lading shall be considered as date of delivery.

Confirmed

29 Transit Insurance: Noted and confirmed





SHEET 4 OF 6 OF 4

ISSUE R1

Sr. No.


Prices quoted must exclude transit insurance charges from FOB International Port of Exit as the same shall be arranged by the Purchaser. However, all transit insurance charges for inland transit up to FOB International Port of Exit must be included quoted prices.

30 Taxes & Duties:

All taxes, duties and levies of any kind payable up to FOB International Port of Exit shall be borne by supplier.

Accepted

31 Export permit/license if required shall be supplier’s responsibility & any expenditure towards same will by borne by the supplier.

Accepted

32 Quoted prices shall be inclusive of all testing and inspection charges


33 Third Party Inspection Charges: Confirm itemised percentage charges for inspection by Third Party Inspection Agencies nominated by BPCL(including inspector’s fee) have been separately quoted in the Priced Bid for non IBR items

Noted & Confirmed

34 In the event of inspection by TCE or BPCL, confirm no extra charges payable to supplier.

Confirmed

35 Supervision Charges: Confirm that the per diem rate quoted for supervision / onsite training (if applicable) are inclusive of to & fro charges, local transport charges, lodging & boarding charges, withholding charges.

Confirmed, quoted in Indian Rupees in Price Bid.

36 Expected number of days for

Supervision of erection & commissioning:

____Days / Not applicable

On-site training: ____Days / Not applicable

37 Acceptance of all other terms & conditions as per attached :

a) General Purchase Conditions,

b) Special Purchase Conditions

c) Instructions to bidders,

d) Terms & Conditions for Supervision of Erection & Commissioning (if applicable)

e) Terms & Conditions for Site work(if applicable)

Accepted

OR

Accepted with deviations as indicated in separate deviation

sheet.





SHEET 5 OF 6 OF 4

ISSUE R1

Sr. No.


f) Any other terms & conditions as per Tender Document

Bidders to submit above documents duly signed & stamped along with deviation sheet (if any) as token of acceptance.

38 Whether any of the Directors of Bidder is a relative of any Director of BPCL/TCE or the Bidder is a firm in which any Director of BPCL/TCE or his relative is a Partner or the Bidder is a private company in which any director of BPCL/TCE is a member or Director.

YES/NO

If YES, Please specify.

39 Please confirm you have not been placed on black list or holiday list declared by Bharat Petroleum Corporation Limited or Tata Consulting Engineers Limited.

Please confirm that you have filled in, signed and attached the enclosed “Proforma of Declaration of Black Listing / Holiday Listing” along with your un-priced offer.

Confirmed Not black listed or put on holiday list.

Confirmed Black listed or Put on holiday list as indicated in

Declaration of Black Listing / Holiday Listing Furnished

40 Confirm that all deviations to Technical Specifications have been indicated on a separate deviation sheet. Any deviation indicated in bid elsewhere other than Deviation Sheet shall not be considered.

Separate Technical Deviations Sheet submitted

41 Confirm that all commercial deviations to Tender Conditions, GPC, SPC have been indicated on a separate commercial deviation sheet. Any deviation indicated in bid elsewhere other than Deviation Sheet shall not be considered.

Separate Commercial Deviations Sheet submitted

42 All commercial deviations to Tender Conditions, GPC, and SPC will result in loading of the quoted price as indicated in special purchase conditions.

Noted

43 Printed terms and conditions, if any, appearing in quotation, shall not be applicable in the event of order. In case of contradiction between the confirmations given above and terms & conditions mentioned elsewhere in the offer, the confirmation given herein above shall prevail.

Confirmed & Accepted

44 Confirm readiness for signing of integrity pact without any deviations in the event of sending your offer.

Confirmed

45 Spare Parts :

a) Confirm item-wise unit price (FOB) of recommended

Noted & Confirmed





SHEET 6 OF 6 OF 4

ISSUE R1

Sr. No.


spare parts for two years as required in enquiry have been quoted separately indicating itemised quantity. b) BPCL reserves the right to place order for 2 years spares separately, as such, confirm validity of 2 years spares up to six months from contractual delivery period of the equipment(s). c) Confirm that the prices of commissioning and start-up spares as required in the enquiry are included in the quoted equipment prices

(Signature of Bidder with Company seal)

Name of the Authorised Signatory :

Designation :

Date :



TCE.6079A-B-610-024 COMMERCIAL QUESTIONNAIRE – INDIGENOUS


SHEET 1 OF 5 OF 4

Bidder’s Name: ________________________________

Enquiry No.: ________________________________

Bidder’s Offer Ref.: ________________________________

Tel. No.: _____________________Mobile No.:________________

Fax No.: ____________________

Contact Person: _____________________E-mail: ____________________

1. Duly signed & stamped copies of this “questionnaire”, with all the clauses duly confirmed/ precisely replied to by the Bidder, shall be enclosed with each and every set of Bidder’s un-priced quotation.

2. Failure on the part of Bidder in not returning this duly filled-up “questionnaire with all the sets of un-priced quotation and/or submitting incomplete replies may lead to rejection of Bidder’s quotation”.

Sr. No.


1 Bid rejection criteria:

Bidders shall note the bid rejection criteria as indicated in ITB. Provisions of these clauses must be adhered to without any deviations, failing which the bid shall be considered to be non-responsive and may be rejected.

Noted

2 Bid Validity period: Confirm Offer validity of FOUR MONTHS from final bid due date.

Confirmed / Not Confirmed refer deviation sheet

Validity: ___Months from bid due date.

3 Defects Liability Period: Confirm acceptance of defect liability period clause as indicated in Special Purchase Conditions.

Noted & Confirmed

4 Performance Bank Guarantee: Confirm acceptance of performance guarantee clause as indicated in Special Purchase Conditions & General Purchase Conditions.

(Applicable for order value of Rs. 10.00 lakhs and above.)

Noted & Confirmed

5 Time Schedule - Delivery Period Noted & Confirmed

6 Technical and Commercial Loading: Bidders shall note loading criteria as mentioned in the Special Purchase Conditions (SPC)

Noted

7 Payment Terms: Confirm acceptance of payment terms as indicated in “Terms of Payment”.


8 Prices have been furnished as per “Format For Submitting Price” indicated in Schedule of Price.

Noted & Confirmed





SHEET 2 OF 5 OF 4

Sr. No.


9 Firmness of prices: Quoted prices shall remain firm and fixed till complete execution of the order.

Noted & Confirmed

10 Confirm that the prices quoted are inclusive of packing & forwarding charges.

Noted & Confirmed

11 Confirm that Prices quoted are on FOT Despatch point basis Confirmed

12 Material is required at BPCL warehouse/site on door delivery basis.


13 Specify Dispatch Point Material shall be dispatched from :

State:

14 Transit risk insurance shall be covered by BPCL and the same has not been included in the quoted prices.

Noted and Confirmed

15 Freight charges: Bidders to include freight charges in quoted price.

Noted and Confirmed

16 Octroi Charges: Bidders to include Octroi Charges & Octroi Service Charges in quoted price.

Noted and Confirmed

17 Taxes & Duties: Any differential in taxes and duties will be cost loaded on case to case basis. However, if a supplier states that taxes/duties are not applicable at present and will be charged as applicable at the time of delivery then his bid shall be loaded by the maximum rate of taxes/duties applicable as on the date of price evaluation.


18 Excise Duty: a. Tarrif sub heading no.

b. Present rate of Excise Duty payable extra on finished products (including spares),

c. Maximum rate applicable (If present rate is nil or concessional)

19 Please indicate following break-up

a. Cenvatable Excise Duty

b. Non Cenvatable Excise Duty

20 Only statutory variations, if any, in the present rate of excise duty, up to the contractual delivery period shall be to Owner’s account subject to documentary evidence to be furnished by the Bidder.

Accepted





SHEET 3 OF 5 OF 4

Sr. No.


21 Any variation in Excise duty at the time of supplies for any reasons, other than statutory including variations due to turnover, shall be borne by Bidder.

Accepted

22 Material supplied will be eligible for CENVAT Credit and Bidder shall furnish all documents as required to avail the same.

Accepted

23 Sales tax payable extra, Specify CST/ MVAT and the present rate applicable

CST: ______% against Form C

MVAT: _____ %

24 In case of CST, C form shall be provided. In case of MVAT, no concessional form shall be provided.

Noted

25 Only statutory variations, if any, in the present rate of CST/MVAT, upto contractual delivery period shall be to Owner’s account subject to documentary evidence to be furnished by the Bidder.

Accepted

26 If CST/MVAT is not applicable at present due to any reason, the same shall be borne by Bidder if it becomes applicable later.

Accepted

27 Any new or additional taxes/ duties and any increase in the existing taxes/duties imposed after contractual delivery shall be to Bidder’s account whereas any corresponding decrease shall be passed on to the Owner.

Accepted

28 Confirm that the prices quoted are without any price variation clause

Noted & Confirmed

29 Testing and Inspection charges: Goods and services are subject to stage wise and final inspection by Owner/ TCE for which no extra charges shall be payable by Owner. Travel, living and personnel expenses of Owner’s inspectors shall be borne by Owner. Travel, living and personnel expenses of TCE’s inspectors shall be borne by TCE. All built in import content shall be subjected to inspection by Third Party Inspection Agency nominated by BPCL for which charges are included in quoted prices and no additional charges will be paid by Owner.

Noted & accepted

30 Quoted prices are inclusive of all testing and inspection charges

Confirmed

31 Supervision Charges: Confirm that the per diem rate quoted for supervision / on site training (if applicable) are inclusive of to & fro charges, local transport charges, lodging & boarding charges.

Confirmed

32 Spare Parts : Noted & Confirmed.





SHEET 4 OF 5 OF 4

Sr. No.


a) Confirm item-wise unit price of recommended spare parts for two years as required in enquiry have been quoted separately indicating itemised quantity,

b) Confirm firm freight charges have been included in quoted price for 2 years spares,

c) BPCL reserves the right to place order for 2 years spares separately, as such, confirm validity of 2 years spares up to six months from the contractual delivery period of the equipment(s).

d) Confirm that the prices of Mandatory Spares, Special Tools & Tackles and Commissioning spares as required in the Tender Document are included in the Total Lumpsum Price.

33 Delayed Delivery:

Confirm acceptance of Delayed Delivery Clause as indicated in Special Purchase Conditions (SPC).


34 Force Majure Clause:

Confirm acceptance of Force Majure Clause as indicated in General Purchase Conditions (GPC).

Noted & Confirmed.

35 Arbitration Clause:

Confirm acceptance of Arbitration Clause as indicated in General Purchase Conditions (GPC).

Noted & Confirmed.

36 Acceptance of all other terms & conditions as per attached :

a) General Purchase Conditions,

b) Special Purchase Conditions

c) Instructions to bidders,

d) Terms & Conditions for Supervision of Erection & Commissioning (if applicable)

e) Terms & Conditions for Site work(if applicable)

f) Any other terms & conditions as per Tender Document

Bidders to submit above documents duly signed & stamped along with deviation sheet (if any) as token of acceptance.

Accepted

OR

Accepted with deviations as indicated in separate deviation sheet.

37 Whether any of the Directors of Bidder is a relative of any Director of BPCL/TCE or the Bidder is a firm in which any Director of BPCL/TCE or his relative is a Partner or the Bidder is a private company in which any director of BPCL/TCE is a member or Director.

YES / NO

If YES, Please Specify.

38 Please confirm you have not been placed on black list or holiday list declared by Bharat Petroleum Corporation Limited

Confirmed Not black listed or put on holiday list.





SHEET 5 OF 5 OF 4

Sr. No.


or Tata Consulting Engineers Limited.

Please confirm that you have filled in, signed and attached the enclosed “Proforma of Declaration of Black Listing / Holiday Listing” along with your un-priced offer.

Confirmed Black listed or Put on holiday list as indicated in Declaration of Black Listing / Holiday Listing Furnished

39 Confirm that all deviations to Technical Specifications have been indicated on a separate deviation sheet. Any deviation indicated in bid elsewhere other than Deviation Sheet shall not be considered.

Separate Technical Deviations Sheet submitted

40 Confirm that all deviations to Tender Conditions, GPC, and SPC have been indicated on a separate deviation sheet. Any deviation indicated in bid elsewhere other than Deviation Sheet shall not be considered.

Separate Commercial Deviations Sheet submitted

41 All commercial deviations to Tender Conditions, GPC, and SPC will result in loading of the quoted price as indicated in Special Purchase Conditions (SPC).


42 Printed terms and conditions, if any, appearing in quotation, shall not be applicable in the event of order. In case of contradiction between the confirmations given above and terms & conditions mentioned elsewhere in the offer, the confirmation given herein above shall prevail.


43 Confirm readiness for signing of integrity pact without any deviations in the event of sending your offer.

Confirmed

(Signature of Bidder with Company seal)

Name of the Authorised Signatory :

Designation :

Date :


SPEC. NO. TCE.M4-903

TATA CONSULTING ENGINEERS LIMITED SECTION: E

DRAWINGS, ENGINEERING DOCUMENTS AND INSTRUCTION MANUALS

SHEET 1 OF 6

ISSUE R5

TCE FORM NO. 329 R5 FILE NAME: M4903R5.DOC

1.0 SCOPE This specification covers the requirements to be followed by the VENDOR/

CONTRACTOR while submitting Drawings, Engineering Documents and Instruction Manuals

2.0 DRAWINGS AND DOCUMENTS 2.1 All drawings and documents submitted by the VENDOR/CONTRACTOR

including those submitted at the time of bid shall be with sufficient detail to indicate the type, size, arrangement, weight of each component, breakdown for packing and shipment, the external connections, fixing arrangements required, the dimensions required for installation and interconnection with other equipment and materials, clearance and spaces required between various portions of equipment and any other information specifically requested in the enquiry document.

2.2 Each drawing and document submitted by the VENDOR/CONTRACTOR shall

be clearly marked with the following details. (a) Name of the PURCHASER (b) Name of the CONSULTANT (c) Project Title including (if applicable) number of units and unit numbers (d) Purchase Order Number/Contract Number (e) Title of the Drawing or Document clearly identifying the system,

equipment or part (f) Drawing or Document Revision Number and Date of Revision (g) Space for PURCHASER/CONSULTANT's Drawing Number (h) Name of the VENDOR/CONTRACTOR (i) In case of SUB-VENDOR/SUB-CONTRACTOR or MANUFACTURER's

drawing, name of the SUB-VENDOR/SUB-CONTRACTOR or MANUFACTURER shall be incorporated.

(j) Drawings and documents shall be duly signed in ‘checked’ and

‘approved’ columns. (k) Scale to which the drawing is drawn (l) Cross references to all relevant drawings and documents (m) All relevant notes to the drawings and documents. All notes necessary

for understanding and execution of work shown on a drawing or document shall be presented on the same drawing or document.





SHEET 2 OF 6

ISSUE R5


(n) All legends to all notations (o) Details of revisions carried out as mentioned in para 2.13 below (p) Bill of materials shall be tabulated, wherever required. (q) All titles, notings, markings and writings on the drawing shall be in

English. (r) All the dimensions shall be in metric units. (s) If standard catalogues are submitted, the applicable items shall be

highlighted therein. 2.3 CATEGORISATION OF DRAWINGS AND DOCUMENTS 2.3.1 The drawings and documents submitted by the VENDOR/CONTRACTOR are

generally categorised under the following three heads: (a) Drawings and documents which are to be reviewed and approved

(Category FA) (b) Drawings and documents which are to be reviewed and commented

but are not for approval (Category FR). (c) Drawings and documents which are for information and records only

(Category FI) 2.3.2 The category of each drawing and document shall be decided by the

PURCHASER/CONSULTANT. 2.4 LIST OF DRAWINGS AND DOCUMENTS On the issue of Purchase Order or Award of Contract, the VENDOR/

CONTRACTOR shall furnish a detailed drawing and document schedule with descriptive title and expected dates of submission within the time as specified in the enquiry document. The categorisation of drawings and documents as per para 2.3.1 above shall be marked by the PURCHASER/CONSULTANT on the Drawing and Document Schedule. The VENDOR/CONTRACTOR shall incorporate these details and submit revised schedules. This schedule shall be revised and drawings and documents added, as necessary, during the progress of work with the concurrence of the PURCHASER/CONSULTANT.

2.5 QUALITY OF DRAWINGS AND DOCUMENTS 2.5.1 The VENDOR/CONTRACTOR shall prepare all necessary detailed drawings,

documents and designs etc., giving full and complete information to enable the PURCHASER/CONSULTANT to properly review the design of work.

2.5.2 Drawings and documents shall be fully legible and drawn in ink and all writing

shall be clearly printed or stencilled.





SHEET 3 OF 6

ISSUE R5


2.5.3 Reproduced drawings shall be clear and legible with no background shade. Sections and details of points of the work shall be shown on the same drawing of the work to which these relate.

2.5.4 Drawings and their title blocks shall be properly drawn, prepared and printed to

the approval of the PURCHASER/CONSULTANT. 2.5.5 Drawings poorly drafted or engineered or without signatures in checked and

approval columns will be returned to the VENDOR/CONTRACTOR without review, for necessary action.

2.6 DRAWINGS AND DOCUMENTS BY SUB-VENDORS/SUB-CONTRACTORS Drawings and documents provided by the SUB-VENDORS/SUB-

CONTRACTORS shall be checked thoroughly by the VENDOR/ CONTRACTOR with special regard to measurements, size of components, material and details to satisfy himself that they conform to the requirements and to the intent of the enquiry document and the VENDOR/CONTRACTOR shall place thereon his signature and the date of his approval before submitting the same to the PURCHASER/CONSULTANT. Drawings and documents found to be inaccurate or otherwise in error shall be returned to the VENDOR/ CONTRACTOR for corrections.

2.7 DESIGN CALCULATIONS The VENDOR/CONTRACTOR shall generally furnish the following information. 2.7.1 Manual Design Calculations (a) Input data and source of information (b) Design criteria to satisfy statutory requirements (c) Formulae used and references for the same (d) Assumptions made. Assumptions made based on experience shall be

clearly mentioned. (e) Latest applicable National/International Codes and Standards. The

Codes and Standards shall be referred to with year of publication, revision number, amendment/addenda.

(f) Reference drawings and documents along with their revision numbers (g) Final results, conclusions and recommendations. 2.7.2 Analysis and Design Calculations using Computers (a) VENDOR/CONTRACTOR shall use accredited and validated software

and the same shall be indicated.





SHEET 4 OF 6

ISSUE R5


(b) Modelling, wherever applicable (c) All information as called for in para 2.7.1 above 2.8 SEQUENCE OF SUBMISSION OF DRAWINGS AND DOCUMENTS 2.8.1 Drawings and documents shall be submitted without delay in line with the

agreed schedule as per para 2.4 above. Number of copies submitted to the PURCHASER/CONSULTANT shall be as per the distribution schedule in Section-F of the enquiry document.

2.8.2 The sequence of submission of drawings and documents shall be such that all

information or data is available for reviewing each drawing and document when it is received.

2.8.3 Revised drawings and documents shall be immediately re-submitted for

approval unless directed otherwise by the PURCHASER/CONSULTANT. 2.8.4 Drawings and documents submitted out of sequence will be returned to the

CONTRACTOR without review for re-submission as per the sequence of drawing and document submission.

2.9 The PURCHASER/CONSULTANT shall have the right at all reasonable times to

see at the work place of the VENDOR/CONTRACTOR, all drawings and documents of any portion of the work.

2.10 The drawings and documents submitted by the VENDOR/CONTRACTOR shall

be reviewed by the PURCHASER/CONSULTANT as far as practicable within four (4) weeks and shall be marked up with comments, if any.

One print of such drawings and documents shall be returned to the VENDOR/

CONTRACTOR duly signed by the PURCHASER/CONSULTANT clearly identifying the review status of the drawing or document.

The VENDOR/CONTRACTOR shall incorporate such modifications and/or

corrections and submit the final drawings and documents for approval. If the VENDOR/CONTRACTOR is unable to incorporate comments in his

drawings or documents, he shall clearly state in his forwarding letter such non-compliance along with valid reasons.

Any delays arising out of failure by the VENDOR/CONTRACTOR to rectify the

drawings and documents to the satisfaction of the PURCHASER/ CONSULTANT in good time shall not alter the CONTRACT completion date.

2.11 Further work by the VENDOR/CONTRACTOR shall be in strict accordance

with these drawings and documents and no deviations shall be permitted without the written approval of the PURCHASER/CONSULTANT.





SHEET 5 OF 6

ISSUE R5


2.12 The PURCHASER/CONSULTANT's approval of the VENDOR/ CONTRACTOR’s and SUB-VENDOR’s/CONTRACTOR’s drawings and documents shall not relieve the VENDOR/CONTRACTOR from his responsibility for errors or omissions which may exist, even though work is done in accordance with such approved drawings and documents. When such errors or omissions are discovered later, these shall be made good by the VENDOR/ CONTRACTOR at his expense irrespective of any approval of the PURCHASER/CONSULTANT.

2.13 REVISION OF DRAWINGS AND DOCUMENTS 2.13.1 For all revisions of the drawings and documents, the VENDOR/CONTRACTOR

shall ensure that all revisions are clearly encircled with revision numbers marked on the drawings and documents.

2.13.2 The VENDOR/CONTRACTOR shall also ensure that general details of revisions

are indicated for each revision in the revision block of the drawing or document along with the date and signed by the approving authority.

2.14 Any manufacturing and fabrication work carried out prior to the approval of the

drawings and documents shall be at the VENDOR’s/CONTRACTOR's own risk and expenses.

2.15 Final drawings and documents of the work as completed ('As-Built' drawings)

shall be prepared by the VENDOR/CONTRACTOR and forwarded to the PURCHASER/CONSULTANT.

'As-Built' drawings and documents shall be submitted within three (3) months of

the issue of the Provisional Acceptance Certificate. 2.16 REPRODUCIBLES 2.16.1 Reproducibles, where called for in the distribution schedule in Section F of the

Enquiry Document shall be submitted after the approval of drawings and documents.

2.16.2 Upon completion of the installation, the VENDOR/CONTRACTOR shall furnish

a complete set of drawings and documents on reproducible tracing. The VENDOR/CONTRACTOR shall make in a neat and accurate manner, a complete record of all changes and revisions to the original design, as installed in the completed work. These drawings and documents shall be submitted to the PURCHASER/CONSULTANT for records and these become the property of the PURCHASER.

2.16.3 In case the drawings and documents are prepared using drafting software,

original floppy or compact disc shall be submitted. In addition drawings and documents on Kilburn reproducible tracings film or equivalent shall be submitted as called for in the enquiry document.





SHEET 6 OF 6

ISSUE R5


3.0 ENGINEERING DATA 3.1 The furnishing of engineering data by the VENDOR/CONTRACTOR shall be in

accordance with the schedule for each set of equipment as specified in the technical specifications and the same shall be in English Language and in metric units unless specified otherwise. The review of these data by the PURCHASER/CONSULTANT will cover only general conformance of the data to the specifications and documents interfaces with the equipment provided under the specifications, external connections, and of the dimensions which might affect plant layout. This review by the PURCHASER/CONSULTANT may not indicate a thorough review of all dimensions, quantities and details of the equipment, materials, any devices or items indicated or the accuracy of the information submitted. This review and/or approval by the PURCHASER/ CONSULTANT shall not be construed by the VENDOR/CONTRACTOR, as limiting any of his responsibilities and liabilities for mistakes and deviations from the requirements, specified under these specifications and documents.

3.2 All engineering data submitted by the VENDOR/CONTRACTOR after final

process including review and approval by the PURCHASER/CONSULTANT shall form part of the CONTRACT documents and the entire works covered under these specifications shall be performed in strict conformity, unless expressly advised otherwise by the PURCHASER/CONSULTANT in writing.

4.0 INSTRUCTION MANUALS 4.1 The VENDOR/CONTRACTOR shall submit to the PURCHASER/

CONSULTANT for their review, the preliminary instruction manuals for all the equipment, covered under the CONTRACT within the time agreed upon between the PURCHASER/CONSULTANT and the VENDOR/CONTRACTOR. The final instruction manuals complete in all respects shall be submitted by the VENDOR/CONTRACTOR within thirty (30) days before the first shipment of the equipment. The instruction manuals shall contain full details and As-Built drawings for all the equipment furnished, the erection procedures, testing procedures, operation and maintenance procedures of the equipment and the same shall be written in English Language unless specified otherwise in the enquiry document. Each manual shall also include a complete set of approved/as-built drawings together with performance/rating curves of the equipment and test certificates where applicable. These instruction manuals shall be submitted in the form of one (1) reproducible original and number of copies shall be as per Section F of the Enquiry Document.

4.2 If, after the commissioning and initial operation of the plant, the instruction

manuals require any modification/additions/changes, the same shall be incorporated and the updated final instruction manuals shall be submitted in the form of one (1) reproducible original and number of copies shall be as per Section-F of the enquiry document.




SPARES AND MAINTENANCE TOOLS AND TACKLES SHEET 1 OF 2

ISSUE R7


1.0 GENERAL 1.1 All spares and maintenance tools and tackles shall be designed to enable

maintenance to be carried out in the least time and at the least cost and support resources without affecting the performance and safety aspects.

1.2 For all major equipment including pumps, fans, drives, heat exchangers and

large valves etc., appropriate structural steel members shall be provided for mounting various handling devices which are necessary for the dismantling and re-assembly of the equipment components during maintenance.

1.3 All the spares and maintenance tools and tackles supplied shall be new and

unused. 1.4 The VENDOR/CONTRACTOR shall guarantee that before going out of

production of spares and maintenance tools and tackles for the equipment furnished, he shall give at least 12 months advance notice to the PURCHASER, so that the latter may order his requirement in one lot, if so desired.

2.0 SPARES The BIDDER shall include the following three (3) categories of spares in his

scope of supply. 2.1 START-UP AND COMMISSIONING SPARES Spares required for start-up and commissioning of the equipment, plant or

system shall be indicated by the BIDDER in TCE.M4-983 ‘Schedule of Start-up and Commissioning Spares’. Unit price and total price to be indicated in this schedule are for information only. Total value of such spares shall be included in the quoted price for supply or erection of the equipment, plant or system. For equipment, plant and system for which erection and commissioning is in the CONTRACTOR’s scope, quantity of spares actually used during the start-up and commissioning or its total value may be more than that indicated in the BID. No additional amount is payable to the CONTRACTOR on this account.

2.2 ESSENTIAL SPARES Essential spares are those, which are considered necessary by the

PURCHASER for three (3) years of trouble-free operation of the equipment, plant or system. These shall be as listed in data sheets A. The BIDDER shall include these in TCE.M4-981 ‘Schedule of Essential and Recommended Spares’. Total value of such spares shall not be included in the quoted price for supply or erection of the equipment, plant or system. This value shall be considered for the purpose of the BID evaluation.

2.3 RECOMMENDED SPAERS Recommended spares are those, which are considered necessary by the

BIDDER for three (3) years of trouble-free operation of the equipment, plant or system in addition to those, specified as ‘Essential Spares’ by the




SPARES AND MAINTENANCE TOOLS AND TACKLES SHEET 2 OF 2

ISSUE R7


PURCHASER. The BIDDER shall include such recommended spares in TCE.M4-981 ‘Schedule of Essential and Recommended Spares’. Total value of such spares shall not be included in the quoted price for supply or erection of the equipment, plant or system. This value shall be considered for the purpose of the BID evaluation.

2.4 All spares supplied shall be strictly inter-changeable with the parts for which

these are intended to be replacements. The spares shall be treated and packed for long term storage under the climatic conditions prevailing at the site e.g., small items shall be packed in sealed transparent plastic bags with desiccator packs as necessary.

2.5 Each spare shall be clearly marked or labelled on the outside of its packing with

its description and purpose. When more than one spare is packed in a single case, a general description of the contents shall be shown on the outside of such case and a detailed list enclosed. All cases, containers and other packages shall be suitably marked and numbered for the purposes of identification.

3.0 MAINTENANCE TOOLS AND TACKLES 3.1 The BIDDER shall indicate and include in his scope of supply all the necessary

tools, tackles, appliances and lifting devices for the effective maintenance and servicing of the equipment and its components. The BIDDER shall list the maintenance tools and tackles offered by him in TCE.M4-982 ‘Schedule of Maintenance Tools and Tackles’. The BIDDER shall also include and supply the minimum maintenance tools and tackles, as called for in section C and D of the Enquiry Document. PURCHASER reserves the right to exclude any of the above items from the VENDOR's/CONTRACTOR's scope of supply and effect price adjustments on the basis of the unit prices quoted. The despatch of tools, tackles, appliances and lifting devices shall be synchronised with the despatch of the related equipment.

3.2 Each tool and tackle shall be clearly marked with its size and purpose. Each set

of tools and tackles shall be suitably arranged in fitted boxes of mild steel construction, the number of boxes being determined in relation to the layout of the plant in question. The taps, stocks and dies shall be kept in approved mild steel boxes with compartments for individual items. If the weight of any box and its contents is such that it cannot be conveniently carried, it shall be supplied on steerable rubber tyred wheels.

3.3 Each tool box shall be provided with a lock and two keys and shall be painted

navy blue and clearly marked, in white letters, with the name of the equipment, plant or system.

3.4 The tools and tackles with the appropriate boxes, are to be handed over to the

PURCHASER at the time of issue of the taking-over certificate.




TRAINING OF PURCHASER’S PERSONNEL SHEET 1 OF 1

ISSUE R6


1.0 The VENDOR/CONTRACTOR shall train the PURCHASER's engineering personnel in the shops, where the equipment will be manufactured and/or in their collaborator's works and where possible, in any other plant or site where equipment manufactured by the VENDOR/CONTRACTOR or his collaborator is under installation or test to enable those personnel to become familiar with the equipment being furnished by the VENDOR/CONTRACTOR.

2.0 The period of training shall be adequate and mutually agreed upon by the

PURCHASER and the VENDOR/CONTRACTOR. 3.0 The training shall be so oriented as to make the PURCHASER's personnel

proficient in operating the equipment. 4.0 The PURCHASER's personnel shall also be trained for routine maintenance

work and lubrication, overhauling, adjustments, testing and replacement procedures to be adopted for the equipment offered.

5.0 The VENDOR/CONTRACTOR shall train the PURCHASER's personnel in

carrying out minor repairs, during the operation of the equipment. 6.0 The charges for training the PURCHASER's personnel, if any, shall be included

in the price for supply, erection, testing and commissioning.




PROGRESS SCHEDULE AND REPORTS SHEET 1 OF 3

ISSUE R7


1.0 SCOPE This specification covers general requirements of planning and scheduling of

work and progress reporting by the VENDOR/CONTRACTOR. 2.0 PLANNING AND SCHEDULING OF WORK 2.1 Within a period of two weeks from the date of issue of LETTER OF

INTENT/PURCHASE ORDER/AWARD OF CONTRACT the VENDOR/ CONTRACTOR shall furnish documents as indicated at para 2.2 below, to the PURCHASER/CONSULTANT. The VENDOR/CONTRACTOR shall furnish the dates of manufacture, testing, despatch, completion of erection and commissioning or stages of work. Work shall be divided into parts and items, showing the order to be adopted for the execution and ensuring that periods do not exceed the periods indicated in the LETTER OF INTENT/PURCHASE ORDER/CONTRACT.

2.2 NETWORK SCHEDULE OR LINKED BAR CHART The VENDOR/CONTRACTOR shall submit the Network Schedule or Linked Bar

Chart for his portion of supply or erection work to the PURCHASER/ CONSULTANT showing the logic and period of execution of activities for review and approval.

2.2.1 EQUIPMENT SUPPLY (a) Commencement and completion of submission of final design data,

specifications and calculations (b) Commencement and completion of submission of drawings of various

categories (c) Procurement of raw materials and bought out items (d) Manufacturing process indicating all major stages (e) Shop inspection and testing indicating all inspection and tests (f) Shipment indicating each planned shipment (g) Other major key activities considered to be critical to the progress of the

PURCHASE ORDER 2.2.2 EQUIPMENT SUPPLY AND ERECTION CONTRACT (a) Commencement and completion of submission of final design data,


categories





ISSUE R7


(c) Procurement of raw materials and bought out items (d) Manufacturing process indicating all major stages (e) Shop inspection and testing indicating all inspection and tests (f) Shipment indicating each planned shipment (g) Other major key activities considered to be critical to the progress of

the PURCHASE ORDER/CONTRACT (h) Commencement of preliminary works (i) Detailed stages of construction and erection for each equipment,

structure and system (j) Resources such as labour, material and equipment etc. planned to be

mobilised (k) Commissioning of all major systems 2.2.3 WORKS CONTRACT (a) Commencement and completion of submission of final design data,


categories (c) Procurement of raw materials and bought out items (d) Manufacturing process indicating all major stages (e) Shop inspection and testing indicating all inspection and tests (f) Shipment indicating each planned shipment (g) Other major key activities considered to be critical to the progress of

the PURCHASE ORDER/CONTRACT (h) Commencement of preliminary works (i) Detailed stages of construction and erection for each equipment,

structure and system (j) Resources such as labour, material and equipment etc. planned to be

mobilised (k) Commissioning of all major systems (l) Phased requirement of bulk materials, if supplied by the PURCHASER





ISSUE R7


(m) Cash flow, if required by the PURCHASER/CONSULTANT 2.3 Appropriate time shall be allocated for the approval of the documents and

inspection of the equipment by the PURCHASER/CONSULTANT. Such time periods shall be indicated in the Network Schedule or Linked Bar Chart.

2.4 Work shall be carried out in line with the Network Schedule or Linked Bar Chart

approved by the PURCHASER/CONSULTANT. The Network Schedule or Linked Bar Chart shall be updated every month or at a frequency mutually agreed upon.

2.5 Major milestones and completion dates as indicated in the approved Network

Schedule or Linked Bar Chart shall not be amended unless the consent of the PURCHASER/CONSULTANT has been obtained.

2.6 Progress meetings shall be held at regular intervals and latest updated and

approved Network Schedule or Linked Bar Chart shall be the basis for discussion. Responsible representatives of the VENDOR/CONTRACTOR and the PURCHASER/CONSULTANT shall attend the meeting.

3.0 PROGRESS REPORTS 3.1 During manufacture or the execution of the PURCHASE ORDER/CONTRACT

the VENDOR/CONTRACTOR shall furnish monthly progress reports to the PURCHASER/CONSULTANT in a format as specified by the PURCHASER/ CONSULTANT. The report shall indicate the progress achieved during the month and total progress up to the month as against scheduled progress. Anticipated completion dates in respect of key phases of work such as release of drawings for fabrication, procurement of raw material, fabrication, inspection, testing and shipment shall be indicated.

3.2 Corrective action for the slippage, if any, in the schedule shall be highlighted in

the progress report. 3.3 After the site work or erection has commenced, the VENDOR/CONTRACTOR

shall provide the PURCHASER/CONSULTANT, at regular intervals, the detailed reports on the progress of all works under the CONTRACT. In case of erection, of critical items, VENDOR/CONTRACTOR shall submit a document indicating the proposed erection scheme with complete details of erection planning and resources proposed to be used for review and approval by PURCHASER/ CONSULTANT. The VENDOR/CONTRACTOR shall submit photographs showing the progress of work at the time and in the manner specified by the PURCHASER/CONSULTANT. The VENDOR/CONTRACTOR shall provide the PURCHASER/CONSULTANT, with daily reports giving the number of labourers, skilled workers, supervisory staff and major construction equipment - his own as well as the SUB-VENDOR’s/SUB-CONTRACTOR’s employed by him, in addition to their locations at the work site.



TCE.6079A-954 Schedule of Distribution of Drawings and Documents

SHEET 1 OF 2 OF 4

Document Description BPCL TCE

TCE Site

Supplier / Contractors

TCE Progress Reports, General Correspondence 2 S 1 -

TCE Site Progress Reports 1 1 S -

Concept Notes

Preliminary

Final

2

2

S

S

-

-

-

-

Design Drawings from TCE to BPCL

Preliminary 'P' issues

'R' issues for Site execution / installation

As-Built’ drawings

2

2 (**)

3 + 1CD

S

S

S

2

1(**)

-

2

2(**)

-

Tender Specification

Draft

Final

3

5

S

S

-

-

-

-

Purchase order from BPCL to contractors

Final

S

1

1

2

General Correspondence from contractors

Commercial

Technical

1 1

1 1

1 1

S S

General Correspondence to Contractor

From TCE

From BPCL

1 S

S

1

1 1

1 1

General Correspondence from TCE site to

Site Contractor

BPCL

1

1

1

1

S S

1 -

Vendor Documents / drawings

1st Submission

Subsequent revisions

Final approved drawings

As-built drawings

2(*)

2(*)

4#

2

3(*)

3(*)

2

1

-

-

-

-

S

S

S

S

Operation / Maintenance Manuals by

Preliminary

Final

3(*)

3

3 (*)

1

1

1

S

S



TCE.6079A-954 Schedule of Distribution of Drawings and Documents

SHEET 2 OF 2 OF 4

Document Description BPCL TCE

TCE Site

Supplier / Contractors

Inspection / Expediting Reports 3 S 1 -

Test & Evaluation reports and Commissioning Reports

3 S 1 -

Marked up for As-Built drawings

from contractor

- - 2 S

NOTES * - TCE shall review the drawings and stamp with comments and send the commented copies to BPCL and Vendor. * * - BPCL will send one copy of signed and stamped drawing released to site for construction to TCE design office, one copy to TCE site and two copies to Cotnractor. # Vendor shall provide 4 hard copies and 2 soft copies (editable version) of the final drawings and documents for BPCL’s reference and records. LEGENDS S = Source, CD = compact disc


TCE.6079A-B-610-024 TATA CONSULTING ENGINEERS LIMITED

SHEET 1 OF 3

SCHEDULE OF MANDATORY SPARES

ISSUE

R0


(INCLUSIVE OF TRANSPORTATION CHARGES)

Sl.No DESCRIPTION QTY in set

A Mandatory spares

1 Set of Impellers(Full Dia) 1

2 Shaft with Keys 1

3 Set of Interstage Shaft Sleeves 1

4 Set of Case Wear rings 1

5 Set of Impeller Wear rings 1

6 Set of Gaskets & O rings(Except for Mech.seal) 2

7 Set of Interstage bushings 1

8

Set of Mechanical Seals along with Shaft sleeves under seals with gland plates for Cartride seals/without gland plage for other seals(DE+NDE) 1

9 Set of Labyrinths for bearing housing 1

10 Set of bearing guards 2

11 Complete coupling assembly with finished bore 1

B Two years operational spares

1 Set of Casing gaskets 4

2 One set of secondary packings for Mechanical seal(Set=Full quantity for pump) 1

3 One set of seal faces for Mechanical seal includings bellows if applicable(Set=Full quantity for Pump) 1

4 One set of flexible elements for coupling 1

5 One set of coupling fasteners for coupling 1

6 Set of Constant Oil levelers for Bearing housing 2



SHEET 2 OF 3


ISSUE

R0


A Steam Turbine

1 Complete Turbine Rotor assembly dynamically balanced and over speed tested.(With permanent metallic storage container with Nitrogen blanketing) 1

2 Journal Bearing(NDE) 1

3 Journal Bearing(DE) 1

4 Set of Thrust Bearing 1

5 Complete set of Shaft seals 2

6 Set of Gaskets/O-rings 2

7 Set of Labyrinths for Bearing Housings 1

8 Set of Coupling 1

9 Sealing compounds for casing joints *Suitable for as many applications 2

10 Assembly of Hydraulic Governor/Actuator 1

11 Set of stem packing for control valves 1

12 Set of stem packing for Steam inlet valve 1

B Lube Oil pumps (Main+Stand by): Centrifugal/Screw Pump

1 Complete bare Main Pump assembly 1

2 Complete bare Stand by pump assembly 1

3 Set of Mechanical seal for Main Pump 1

4 Set of Mechanical seal for Stand by Pump 2

5 Coupling for Stand by Pump 1

6 Coupling for Main Oil Pump 1

7 Lube Oil filter cartridge with set of gaskets 4

8 Suction strainer for Lube Oil Pumps 1

GEAR BOX (SPECIAL/GENERAL PURPOSE)

S.No PART DESCRIPTION Quantity Required in set



SHEET 3 OF 3


ISSUE

R0


1 Set of High Speed & Low Speed Gears and Shaft assembly 1

2 Set of Radial Bearings 1

3 Set of Thrust bearings 1

4 Set of Labyrinths, Oil seals 1

5 Set of Gaskets/O-rings 1

6 Complete Bare Lube Oil Pump 1

7 Coupling for Lube Oil Pump 1

8 Mechanical Seal for Lube Oil Pump-if applicable 2

Note: 1. The word one set means the quantity required for full replacement of that part in one machine.

2. In case any spare which is listed in the checklist is not applicable due to specific construction/design of the equipment, the same shall be highlighted as ‘Not

Applicable’ against that spare supported with proper technical explanation.

3. Spare parts shall be identical in all respects to the parts fitted on the main equipment, including dimensions, material of construction & heat treatment.

4. Instrumentation spares to be provided as per Mandatory spare philosophy indicated in the Instrumentation Section.


TCE.6079A-B-610-

024


SCHEDULE OF PERFORMANCE GUARANTEE SHEET 1 OF 4

1.0 PERFORMANCE GUARANTEES & TESTS

1.1 The CONTRACTOR shall guarantee that materials and operation of the system

shall meet the requirements of this specification.

1.2 The CONTRACTOR shall guarantee satisfactory performance of the Cooling

water pumps and turbine under the specified properties of water.

1.3 The CONTRACTOR shall guarantee satisfactory performance of the proposed

cooling water pumps with following discharge parameters:

Sl. No. DESCRIPTION UNIT SPECIFICATION

COOLING WATER PUMPS

1 Flow rate m3/hr 3920

2 Differential Head MLC 51

2.0 PERFORMANCE TESTS

2.1 The CONTRACTOR shall conduct the performance test of the pumps after

commissioning within the guarantee period.

2.2 It is the responsibility of the CONTRACTOR to conduct the performance test and

also arrange for all instruments with calibration certificates and equipment to

conduct the required guarantee tests of the Centrifugal pumps & turbines.

2.3 After the system has been stabilized by the vendor during trial run, the vendor

shall conduct a performance guarantee test run for the complete system prior to

handing over the plant to the owner. The procedure for performance testing shall

be submitted to the owner / consultant for review and shall be mutually agreed.

2.4 CONTRACTOR shall furnish, after the award of Contract, the detailed test

procedure and suggested period of testing, for OWNER's review and approval.

3.0 BID EVALUATION

3.1 The BIDDER shall comply with the performance parameters wherever they are

specified in Data Sheets of this tender specification. No credit shall be given

during the Bid evaluation, if parameters better than those specified are offered

by the BIDDER.

3.2 BIDDER shall completely study all sections of this specification and indicate all

deviations in the Schedule of Deviations. If no deviations are indicated or except

for the deviations indicated in the Bid, it will be presumed that the Bid conforms

in all aspects to the specification and OWNER reserves the right to evaluate the


TCE.6079A-B-610-

024



Bid without any further reference to the BIDDER. It is binding on the part of

BIDDER to supply the equipment in accordance with the specification except for

the deviations accepted by the OWNER. No extra claims on this account will be

accepted after the award of the Contract


TCE.6079A-B-610-

024



SCHEDULE OF PERFORMANCE GUARANTEE FOR POWER

SUPPLIER shall furnish performance guarantee for all the continuously operating

rotating equipments in respect of all items listed in table below. Only the values

indicated in the Table will be considered for evaluation.

Also the values indicated in Table and the guaranteed performance curve will be

the basis for evaluation of the performance test by the PURCHASER and/or

acceptance of the compressor.

Values furnished by Bidder in this schedule shall alone be considered for Loading

during Bid Evaluation.

Bidder to fill individually for each centrifugal pump as applicable.

Sl. No Particulars Guaranteed value

A MOTOR DRIVEN PUMP

1 Rated head (excluding losses) MWC

2 Rated capacity at the specified rated conditions m3/h

3 Minimum guaranteed overall efficiency %

4 Minimum guaranteed motor efficiency %

5 Power input to pump at the rated head and capacity kW

6 Power input to pump motor at the rated head &

capacity

kW

7 Shut off Head of the pump MWC

8 Maximum value at peak to peak amplitude of

vibration on top if bearings of motor

mm

9 Noise level from 1 m of equipment dBA

B TURBINE DRIVEN PUMP

1 Shaft Output KW

2 Steam consumption rate T/hr

3 Turbine Internal Efficiency %

4 Bearing vibration level microns

5 Noise level from 1 m of equipment dBA

Note:-

a) No negative tolerance on item A and B

SIGNATURE ___________________________

NAME ___________________________

COMPANY SEAL DESIGNATION ___________________________

DATE ___________________________


TCE.6079A-B-610-

024



GUARANTEE STATEMENT

The contractor shall give guarantees for Centrifugal pumps performance over

the following parameters:

Sl. No DESCRIPTION UNIT VALUE

COOLING Water Pumps

1 Flow rate m3/hr

2 Differential Head MLC

3 Noise dBA

4 NPSHR MLC

If the above guaranteed are not sustained on test, the contractor hereby

guarantees that he shall make good the deficiency in each every case by

altering and / or replacing the defective at no extra cost to the Purchaser.

SIGNATURE _____________________

NAME _____________________

COMPANY SEAL DESIGNATION _____________________

DATE _____________________


TCE.6079A-B-610-024

TATA CONSULTING ENGINEERS LIMITED SECTION: SOP

SCHEDULE OF PRICE Page 1 of 7

TCE FORM NO. 120 R3 FILE NAME: F120R3.DOC

R0

BID DOCUMENT NO: TCE.6079A-B-610-024

ITEM: COOLING WATER PUMPS

PROJECT : OFFSITES & UTILITIES FOR CCR / NHT UNIT

CLIENT : M/s. BHARAT PETROLEUM CORPORATION LIMITED

SUPPLIER’S BID REF _______________________________________ DT ______________

Sr. No. Description Form No

(A) INDIGENOUS BIDDERS:

1 Price Schedule for supply of Turbine driven Cooing water Pump SP-1

2 Price Schedule for supply of Motor driven Cooling water Pumps SP-2

3 Price Schedule for Recommended Spares for Two Years Operation & Maintenance SP-3

(B) FOREIGN BIDDERS:

4 Price Schedule for supply of Turbine driven Cooing water Pump SP-1A

5 Price Schedule for supply of Motor driven Cooling water Pumps SP-2A

6 Price Schedule for Recommended Spares for Two Years Operation & Maintenance SP-3A


TCE.6079A-B-610-024




R0

SCHEDULE OF PRICE - INDIGENOUS (FORM SP-1)

BASIC PRICE FOR SUPPLY OF COOLING WATER PUMPS ASSEMBLY INCLUDING DESIGN / DETAIL ENGINEERING, MANUFACTURING , TESTING, MANDATORY SPARES, COMMISSIONING & START-UP SPARES, MAINTENANCE TOOLS & TACKLES, SPECIAL TOOLS AND TACKLES AND THIRD PARTY INSPECTION CHARGES FOR IMPORT CONTENT IF APPLICABLE, PACKING & FORWARDING CHARGES FOR THE FOLLOWING TAGS IN STRICT COMPLIANCE WITH TECHNICAL SPECIFICATION AND VARIOUS ATTACHMENTS / ENCLOSURES / ANNEXURE MENTIONED THEREIN, DATA SHEETS, STANDARDS, SPECIFICATIONS AND TO THE SATISFACTION OF THE ENGINEER-IN-CHARGE.

SL. No

ITEM DESCRIPTION QUANTITY UNIT RATE (Rs) AMOUNT (Rs)

A TAG NO. 143-P-401 A TURBINE DRIVEN COOLING WATER PUMP ASSEMBLY 1 SET

B EXCISE DUTY @ 10.3 % OF A

C CST @ _____ % AGAINST FORM C (% OF A+B) OR MVAT @ ____% (OF A+B)

D FREIGHT CHARGES @ _________% OF "A" FOR TAG NO. 143-P-401 A

E EXCISE DUTY ON FREIGHT@ ____________% OF D

F CST ON FREIGHT @_______% (OF D+E) OF MVAT @_______% (OF D+E)

G SERVICE TAX ON FREIGHT @________% OF D

H OCTROI @_________%

I OCTROI SERVICE CHARGES ( IN TERMS OF PERCENTAGE OF H i.e. OCTROI AMOUNT) __________%

J TOTAL (A+B+C+D+E+F+G+H+I)

K PER DIEM RATE FOR SUPERVISION OF ERECTION & COMMISSIONING (Rs. PER MANDAY)

L SERVICE TAX @ 10.3% (% OF K)

NOTE:

1) NO TAXES AND DUTIES OTHER THAN THOSE INDICATED ABOVE SHALL BE PAYABLE. 2) 10 DAYS FOR SUPERVISION OF ERECTION & COMMISSIONING SHALL BE CONSIDERED FOR PRICE EVALUATION.


TCE.6079A-B-610-024




R0


BASIC PRICE FOR SUPPLY OF COOLING WATER PUMPS ASSEMBLY INCLUDING DESIGN / DETAIL ENGINEERING, MANUFACTURING , TESTING, MANDATORY SPARES, COMMISSIONING & START-UP SPARES, MAINTENANCE TOOLS & TACKLES, SPECIAL TOOLS AND TACKLES AND THIRD PARTY INSPECTION CHARGES FOR IMPORT CONTENT IF APPLICABLE, PACKING & FORWARDING CHARGES FOR THE FOLLOWING TAGS IN STRICT COMPLIANCE WITH TECHNICAL SPECIFICATION AND VARIOUS ATTACHMENTS / ENCLOSURES / ANNEXURE MENTIONED THEREIN, DATA SHEETS, STANDARDS, SPECIFICATIONS AND TO THE SATISFACTION OF THE ENGINEER-IN-CHARGE.

SL. No

ITEM DESCRIPTION QUANTITY UNIT RATE (Rs) AMOUNT (Rs)

A TAG NO. 143-P-401 B/C MOTOR DRIVEN COOLING WATER PUMPS ASSEMBLY 2 SETS

B EXCISE DUTY @ 10.3 % OF A

C CST @ _____ % AGAINST FORM C (% OF A+B) OR MVAT @ ____% (OF A+B)

D FREIGHT CHARGES @ _________% OF "A" FOR TAG NO. 143-P-401 B/C

E EXCISE DUTY ON FREIGHT@ ____________% OF D

F CST ON FREIGHT @_______% (OF D+E) OF MVAT @_______% (OF D+E)

G SERVICE TAX ON FREIGHT @________% OF D

H OCTROI @_________%

I OCTROI SERVICE CHARGES ( IN TERMS OF PERCENTAGE OF H i.e. OCTROI AMOUNT) __________%

J TOTAL (A+B+C+D+E+F+G+H+I)

K PER DIEM RATE FOR SUPERVISION OF ERECTION & COMMISSIONING (Rs. PER MANDAY)

L SERVICE TAX @ 10.3% (% OF K)

NOTE:

1) NO TAXES AND DUTIES OTHER THAN THOSE INDICATED ABOVE SHALL BE PAYABLE. 2) 10 DAYS FOR SUPERVISION OF ERECTION & COMMISSIONING SHALL BE CONSIDERED FOR PRICE EVALUATION.


TCE.6079A-B-610-024




R0


RECOMMENDED SPARES FOR TWO YEARS OPERATION & MAINTENANCE (Bidder to use photocopy of this proforma to furnish tag wise details)

SL. No

ITEM DESCRIPTION / TAG NO. QUANTITY UNIT RATE (Rs) AMOUNT (Rs)

NOTE:

1) Vendor's quoted prices in Form SP-1 & 2 of price schedule shall be exclusive of the cost of recommended spares for two years operation. 2) Specify Firm Freight charges (payable extra) for two years spares @ ___________ % (applicable only in case of two years spares ordered separately)

3) Cenvatable Service Tax extra @ _________ % shall be applicable on above freight charges for two years spares.

4) Excise Duty (ED) applicable extra on two years spares @ __________ %

5) Central Sales Tax (CST) against Form C applicable extra on two years spares @ __________ %

6) MVAT, if applicable extra on two years spares @ __________ %

7) OCTROI @___________%

8) OCTROI SERVICE CHARGES @__________% OF OCTROI.

9) The above quoted Price should be valid up to six months after contract delivery period


TCE.6079A-B-610-024




R0

SCHEDULE OF PRICE - FOREIGN (SP-1A)

BASIC PRICE FOR SUPPLY OF COOLING WATER PUMPS ASSEMBLY INCLUDING DESIGN / DETAIL ENGINEERING, MANUFACTURING , TESTING, MANDATORY SPARES, COMMISSIONING & START-UP SPARES, MAINTENANCE TOOLS AND TACKLES & SPECIAL TOOLS AND TACKLES FOR THE FOLLOWING TAGS IN STRICT COMPLIANCE WITH TECHNICAL SPECIFICATION AND VARIOUS ATTACHMENTS / ENCLOSURES / ANNEXURE MENTIONED THEREIN, DATA SHEETS, STANDARDS, SPECIFICATIONS AND TO THE SATISFACTION OF THE ENGINEER-IN-CHARGE.

SL. No

ITEM DESCRIPTION QUANTITY CURRENCY UNIT RATE AMOUNT

A TAG NO. 143-P-401 A TURBINE DRIVEN COOLING WATER PUMP ASSEMBLY ON FOB PORT OF EXIT BASIS.

1 SET

B THIRD PARTY INSPECTION CHARGES

Lumpsum

C TOTAL (A+B)

D PER DIEM RATE FOR SUPERVISION OF ERECTION & COMMISSIONING (Rs. PER MANDAY)

Rupees

E SERVICE TAX @ 10.3% (% OF D)

NOTE:

1) NO TAXES AND DUTIES OTHER THAN THOSE INDICATED ABOVE SHALL BE PAYABLE.

2) 10 DAYS FOR SUPERVISION OF ERECTION & COMMISSIONING SHALL BE CONSIDERED FOR PRICE EVALUATION.


TCE.6079A-B-610-024




R0

SCHEDULE OF PRICE - FOREIGN (SP-2A)

BASIC PRICE FOR SUPPLY OF COOLING WATER PUMPS ASSEMBLY INCLUDING DESIGN / DETAIL ENGINEERING, MANUFACTURING , TESTING, MANDATORY SPARES, COMMISSIONING & START-UP SPARES, MAINTENANCE TOOLS AND TACKLES & SPECIAL TOOLS AND TACKLES FOR THE FOLLOWING TAGS IN STRICT COMPLIANCE WITH TECHNICAL SPECIFICATION AND VARIOUS ATTACHMENTS / ENCLOSURES / ANNEXURE MENTIONED THEREIN, DATA SHEETS, STANDARDS, SPECIFICATIONS AND TO THE SATISFACTION OF THE ENGINEER-IN-CHARGE.

SL. No

ITEM DESCRIPTION QUANTITY CURRENCY UNIT RATE AMOUNT

A TAG NO. 143-P-401 B/C MOTOR DRIVEN COOLING WATER PUMPS ASSEMBLY ON FOB PORT OF EXIT BASIS

2 SETS

B THIRD PARTY INSPECTION CHARGES

Lumpsum

C TOTAL (A+B)

D PER DIEM RATE FOR SUPERVISION OF ERECTION & COMMISSIONING (Rs. PER MANDAY)

Rupees

E SERVICE TAX @ 10.3% (% OF D)

NOTE:

1) NO TAXES AND DUTIES OTHER THAN THOSE INDICATED ABOVE SHALL BE PAYABLE.

2) 10 DAYS FOR SUPERVISION OF ERECTION & COMMISSIONING SHALL BE CONSIDERED FOR PRICE EVALUATION.


TCE.6079A-B-610-024




R0

SCHEDULE OF PRICE - FOREIGN (FORM SP-3A)

RECOMMENDED SPARES FOR TWO YEARS OPERATION & MAINTENANCE (Bidder to use photocopy of this proforma to furnish tag wise details)

SL. No

ITEM DESCRIPTION / TAG NO. QUANTITY CURRENCY UNIT RATE AMOUNT

NOTE:

1) Vendor's quoted prices in Form SP-1A & SP-2A of price schedule shall be exclusive of the cost of recommended spares for two years operation.

2) The above quoted prices shall be FOB port of exit basis.

3) The above quoted Price should be valid up to six months after contract delivery period
