satzung zur Änderung der studien- und prüfungs- ordnung ... · innovation & entrepreneurship...

97
Satzung zur Änderung der Studien- und Prüfungs- ordnung für den Masterstudiengang Double-Degree- Masterstudiengang ICT Innovation der Fakultät IV Elektrotechnik und Informatik der Technischen Universität Berlin *) vom 20.01.2016 Der Fakultätsrat der Fakultät IV - Elektrotechnik und Informatik der Technischen Universität Berlin hat am 20.01.2016 gemäß § 18 Abs. 1 Nr. 1 der Grundordnung der Technischen Universität Berlin, § 71 Abs. 1 Nr. 1 des Gesetzes über die Hochschulen im Land Berlin (Berliner Hochschulgesetz BerlHG ) in der Fassung vom 26. Juli 2011 (GVBl. S. 378), zuletzt geändert durch Artikel 4 des Gesetzes vom 9. Mai 2016 (GVBl. S. 226) die folgende Änderung der Studien - und Prüfungsordnung für den Masterstudiengang Double-Degree-Masterstudiengang ICT Innovation beschlossen: 1. In der Studien- und Prüfungsordnung für den Masterstudiengang Double-Degree-Masterstudiengang ICT Innovation in der Fassung vom 23.7.2014, zuletzt geändert am 20.2.2016, AMBl. 2/2016 wird die Anlage Modulliste neu gefasst. Sie gilt ab dem Wintersemester 2016/17 in der in der Anlage veröffentlichten Form. 2. Die Änderungen treten am Tag nach der Veröffentlichung im Amtlichen Mitteilungsblatt der TU Berlin in Kraft.

Upload: doanh

Post on 10-Aug-2019

214 views

Category:

Documents


0 download

TRANSCRIPT

Satzung zur Änderung der Studien- und Prüfungs- ordnung für den Masterstudiengang Double-Degree-Masterstudiengang ICT Innovation der Fakultät IV – Elektrotechnik und Informatik der Technischen Universität Berlin *)

vom 20.01.2016

Der Fakultätsrat der Fakultät IV - Elektrotechnik und Informatik der Technischen Universität Berlin hat am 20.01.2016 gemäß § 18 Abs. 1 Nr. 1 der Grundordnung der Technischen Universität Berlin, § 71 Abs. 1 Nr. 1 des Gesetzes über die Hochschulen im Land Berlin (Berliner Hochschulgesetz – BerlHG ) in der Fassung vom 26. Juli 2011 (GVBl. S. 378), zuletzt geändert durch Artikel 4 des Gesetzes vom 9. Mai 2016 (GVBl. S. 226) die folgende Änderung der Studien - und Prüfungsordnung für den Masterstudiengang Double-Degree-Masterstudiengang ICT Innovation beschlossen:

1. In der Studien- und Prüfungsordnung für den Masterstudiengang Double-Degree-Masterstudiengang ICT Innovation in der Fassung vom 23.7.2014, zuletzt geändert am 20.2.2016, AMBl. 2/2016 wird die Anlage Modulliste neu gefasst. Sie gilt ab dem Wintersemester 2016/17 in der in der Anlage veröffentlichten Form.

2. Die Änderungen treten am Tag nach der Veröffentlichung im Amtlichen Mitteilungsblatt der TU Berlin in Kraft.

Studiengangsbeschreibung: keine Angabe

Weitere Informationen finden Sie unter:http://www.masterschool.eitictlabs.eu

Studien-/Prüfungsordnungsbeschreibung: keine Angabe

Weitere Informationen zur Studienordnung finden Sie unter:keine Angabe

Weitere Informationen zur Prüfungsordnung finden Sie unter:keine Angabe

Die Gewichtungsangabe '1.0' bedeutet, die Note wird nach dem Umfang in LP gewichtet (§ 47 Abs. 6 AllgStuPO); '0.0' bedeutet, die Notewird nicht gewichtet; jede andere Zahl ist ein Multiplikationsfaktor für den Umfang in LP. Weitere Hinweise zur Bildung der Gesamtnote sindder geltenden Studien- und Prüfungsordnung zu entnehmen.

Studiengang

Master of Science Double-Degree-Masterstudiengang ICT Innovation (MSc-ICT)

Abschluss:

Master of ScienceKürzel:

MSc-ICTImmatrikulation zum:

Wintersemester

Fakultät:

Fakultät IVVerantwortlich:

Küpper, Axel

Master of Science Double-Degree-Masterstudiengang ICT Innovation (MSc-ICT)

MSc ICT Innovation StuPO 2016

Datum:

keine Angabe

Punkte:

keine Angabe

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 1 von 9

Innovation & Entrepreneurship Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Entry year Mandatory Unterbereich von Innovation & Entrepreneurship Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Entry year Electives Unterbereich von Innovation & Entrepreneurship Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 5 Leistungspunkte bestanden werden. Es dürfen höchstens 5 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Exit year Mandatory Unterbereich von Innovation & Entrepreneurship Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Studienrichtungen Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es darf höchstens 1 Studiengangsbereich bestanden werden.

Major: Cloud Computing and Services Unterbereich von Studienrichtungen Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Für diesen Studiengangsbereich sind keine Wahlregeln angegeben.

Double-Degree-Masterstudiengang ICT Innovation (MSc) - MSc ICT Innovation StuPO 2016

Modulliste WS 2016/17

Titel LP Prüfungsform Benotet GewichtInnovation Management & Entrepreneurship Basics 6 Portfolioprüfung ja 1.0Venture Campus - ICT Innovation 9 Portfolioprüfung ja 1.0

Titel LP Prüfungsform Benotet GewichtHuman Side of Innovation 6 Portfolioprüfung ja 1.0Innovation Economics 6 Portfolioprüfung ja 1.0Innovation Marketing 6 Portfolioprüfung ja 1.0Innovation Policy 6 Portfolioprüfung ja 1.0Intellectual Property Management 6 Portfolioprüfung ja 1.0Open Source and IP in the Digital Society 6 Portfolioprüfung ja 1.0Strategic Innovation Management 6 Portfolioprüfung ja 1.0Strategic Management 6 Portfolioprüfung ja 1.0Strategic Standardisation 6 Portfolioprüfung ja 1.0

Titel LP Prüfungsform Benotet GewichtI&E Study 6 schriftlich ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 2 von 9

Entry year: Cloud Computing and Services Unterbereich von Major: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Entry year Mandatory: Cloud Computing and Services Unterbereich von Entry year: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Entry year Electives: Cloud Computing and Services Unterbereich von Entry year: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 3 Leistungspunkte bestanden werden. Es dürfen höchstens 3 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Entry year free choice: Cloud Computing and Services Unterbereich von Entry year: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden.

Titel LP Prüfungsform Benotet GewichtCloud Computing 6 schriftlich ja 1.0Distributed Algorithms 6 schriftlich ja 1.0Internet of Services Lab 9 Portfolioprüfung ja 1.0Network Architectures - Basics 6 schriftlich ja 1.0

Titel LP Prüfungsform Benotet GewichtAdvanced Enterprise Computing 6 Portfolioprüfung ja 1.0Advanced Information Management 1 (AIM-1) - Heterogeneous and DistributedInformation Systems (HDIS)

6 Portfolioprüfung ja 1.0

Advanced Information Management 3 (AIM-3) Scalable Data Science: Systems &Methods (SDSSM)

6 Portfolioprüfung ja 1.0

BDAPRO - Big Data Analytics Project 9 Portfolioprüfung ja 1.0Cloud Computing 6 schriftlich ja 1.0Cloud Prototyping 12 Portfolioprüfung ja 1.0DBT: Database Technology 6 Portfolioprüfung ja 1.0Digital Communities 6 mündlich ja 1.0Distributed Algorithms 6 schriftlich ja 1.0Enterprise Computing 6 Portfolioprüfung ja 1.0Hot Topics in Information Systems Engineering 3 Portfolioprüfung ja 1.0Hot Topics in Next Generation Networks and Future Internet Technologies 3 Portfolioprüfung ja 1.0IDB-PRA: Implementation of a Database Engine (Database Technology Lab) 6 Portfolioprüfung ja 1.0IMPRO - Project Hot Topics in Information Management 6 Portfolioprüfung ja 1.0IMSEM - Seminar Hot Topics in Information Management 3 Portfolioprüfung ja 1.0Internet of Services Lab 9 Portfolioprüfung ja 1.0Mobile Services 6 mündlich ja 1.0Network Architectures - Basics 6 schriftlich ja 1.0Network Architectures - WirelessLab 9 Portfolioprüfung ja 1.0Netzwerkarchitekturen - RouterLab 9 Portfolioprüfung ja 1.0Next Generation Networks - Basis 1 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 1 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 2 9 Portfolioprüfung ja 1.0Operating System Design 6 schriftlich ja 1.0Parallel Systems 6 mündlich ja 1.0Performance Evaluation of Computer Communication Systems 6 Portfolioprüfung ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 3 von 9

Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Exit year: Cloud Computing and Services Unterbereich von Major: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Exit year Electives: Cloud Computing and Services Unterbereich von Exit year: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 18 Leistungspunkte bestanden werden. Es dürfen höchstens 18 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Exit year free choice: Cloud Computing and Services Unterbereich von Exit year: Cloud Computing and Services Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Major: Data Science Unterbereich von Studienrichtungen Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Für diesen Studiengangsbereich sind keine Wahlregeln angegeben.

Exit year: Data Science Unterbereich von Major: Data Science

Titel LP Prüfungsform Benotet GewichtAdvanced Enterprise Computing 6 Portfolioprüfung ja 1.0Advanced Information Management 1 (AIM-1) - Heterogeneous and DistributedInformation Systems (HDIS)

6 Portfolioprüfung ja 1.0

Advanced Information Management 3 (AIM-3) Scalable Data Science: Systems &Methods (SDSSM)

6 Portfolioprüfung ja 1.0

BDAPRO - Big Data Analytics Project 9 Portfolioprüfung ja 1.0Cloud Computing 6 schriftlich ja 1.0Cloud Prototyping 12 Portfolioprüfung ja 1.0DBT: Database Technology 6 Portfolioprüfung ja 1.0Digital Communities 6 mündlich ja 1.0Distributed Algorithms 6 schriftlich ja 1.0Enterprise Computing 6 Portfolioprüfung ja 1.0Hot Topics in Information Systems Engineering 3 Portfolioprüfung ja 1.0Hot Topics in Next Generation Networks and Future Internet Technologies 3 Portfolioprüfung ja 1.0IDB-PRA: Implementation of a Database Engine (Database Technology Lab) 6 Portfolioprüfung ja 1.0IMPRO - Project Hot Topics in Information Management 6 Portfolioprüfung ja 1.0IMSEM - Seminar Hot Topics in Information Management 3 Portfolioprüfung ja 1.0Internet of Services Lab 9 Portfolioprüfung ja 1.0Mobile Services 6 mündlich ja 1.0Network Architectures - Basics 6 schriftlich ja 1.0Network Architectures - WirelessLab 9 Portfolioprüfung ja 1.0Netzwerkarchitekturen - RouterLab 9 Portfolioprüfung ja 1.0Next Generation Networks - Basis 1 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 1 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 2 9 Portfolioprüfung ja 1.0Operating System Design 6 schriftlich ja 1.0Parallel Systems 6 mündlich ja 1.0Performance Evaluation of Computer Communication Systems 6 Portfolioprüfung ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 4 von 9

Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Exit year Mandatory: Data Science Unterbereich von Exit year: Data Science Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Exit year Electives: Data Science Unterbereich von Exit year: Data Science Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 3 Leistungspunkte bestanden werden. Es dürfen höchstens 3 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Exit year free chioce: Data Science Unterbereich von Exit year: Data Science Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Major: Embedded Systems Unterbereich von Studienrichtungen Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Für diesen Studiengangsbereich sind keine Wahlregeln angegeben.

Entry year: Embedded Systems Unterbereich von Major: Embedded Systems Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Entry year Mandatory: Embedded Systems Unterbereich von Entry year: Embedded Systems Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Titel LP Prüfungsform Benotet GewichtAdvanced Information Management 3 (AIM-3) Scalable Data Science: Systems &Methods (SDSSM)

6 Portfolioprüfung ja 1.0

BDAPRO - Big Data Analytics Project 9 Portfolioprüfung ja 1.0

Titel LP Prüfungsform Benotet GewichtAdvanced Information Management 1 (AIM-1) - Heterogeneous and DistributedInformation Systems (HDIS)

6 Portfolioprüfung ja 1.0

Advanced Information Management 2 - Management of Data Streams 6 mündlich ja 1.0BDASEM - Big Data Analytics Seminar 3 Portfolioprüfung ja 1.0Cloud Computing 6 schriftlich ja 1.0DBT: Database Technology 6 Portfolioprüfung ja 1.0IDB-PRA: Implementation of a Database Engine (Database Technology Lab) 6 Portfolioprüfung ja 1.0Maschinelles Lernen 1 9 schriftlich ja 1.0Speech Signal Processing and Speech Technology 6 Portfolioprüfung ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 5 von 9

Entry year free choice: Embedded Systems Unterbereich von Entry year: Embedded Systems Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Exit year: Embedded Systems Unterbereich von Major: Embedded Systems Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Exit year Electives: Embedded Systems Unterbereich von Exit year: Embedded Systems Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 18 Leistungspunkte bestanden werden. Es dürfen höchstens 18 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Exit year free choice: Embedded Systems Unterbereich von Exit year: Embedded Systems Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Major: Human Computer Interaction and Design Unterbereich von Studienrichtungen Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Für diesen Studiengangsbereich sind keine Wahlregeln angegeben.

Exit year: Human Computer Interaction and Design Unterbereich von Major: Human Computer Interaction and Design Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Titel LP Prüfungsform Benotet GewichtAdvanced Computer Architecture 6 Portfolioprüfung ja 1.0Applied Embedded Systems Project 6 Portfolioprüfung ja 1.0Compiler Design 6 Portfolioprüfung ja 1.0Embedded Operating Systems 6 mündlich ja 1.0Quality Assurance of Embedded Systems 6 mündlich ja 1.0

Titel LP Prüfungsform Benotet GewichtAd-hoc and Sensor Networks 6 Portfolioprüfung ja 1.0Analysis and Optimization of Embedded Systems 6 mündlich ja 1.0Computer Arithmetic: Circuit Perspective 6 Portfolioprüfung ja 1.0Embedded Systems Security Labor 6 Portfolioprüfung ja 1.0Hot Topics in Operating Systems and Distributed Systems 3 Portfolioprüfung ja 1.0Multicore Systems 6 Portfolioprüfung ja 1.0Networked Embedded Systems 6 Portfolioprüfung ja 1.0Operating System Project & Seminar 9 Portfolioprüfung ja 1.0Parallel Systems 6 mündlich ja 1.0Recent Advances in Computer Architecture 3 Portfolioprüfung ja 1.0Seminar Software Engineering of Embedded Systems 3 Portfolioprüfung ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 6 von 9

Exit year Mandatory: Human Computer Interaction and Design Unterbereich von Exit year: Human Computer Interaction and Design Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Exit year Electives: Human Computer Interaction and Design Unterbereich von Exit year: Human Computer Interaction and Design Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 12 Leistungspunkte bestanden werden. Es dürfen höchstens 12 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Exit year free choice: Human Computer Interaction and Design Unterbereich von Exit year: Human Computer Interaction and Design Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Major: Internet Technology and Architecture Unterbereich von Studienrichtungen Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Für diesen Studiengangsbereich sind keine Wahlregeln angegeben.

Entry year: Internet Technology and Architecture Unterbereich von Major: Internet Technology and Architecture Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Entry year Mandatory: Internet Technology and Architecture Unterbereich von Entry year: Internet Technology and Architecture Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle Module dieses Studiengangsbereiches müssen bestanden werden. Module in diesem Studiengangsbereich:

Titel LP Prüfungsform Benotet GewichtSpeech Signal Processing and Speech Technology 6 Portfolioprüfung ja 1.0

Titel LP Prüfungsform Benotet GewichtBiometric Identification 3 Portfolioprüfung ja 1.0Communication acoustics 6 schriftlich ja 1.0Computer-Supported Interaction 3 schriftlich ja 1.0Computergraphik Seminar A 3 Portfolioprüfung ja 1.0Digital Image Processing 6 schriftlich ja 1.0Introduction to Physiological Computing 6 Portfolioprüfung ja 1.0Photogrammetric Computer Vision 9 schriftlich ja 1.0Projekt: Statistische Methoden in KI und ML 9 Portfolioprüfung ja 1.0Study Project Quality & Usability (6CP) 6 Portfolioprüfung ja 1.0Study Project Quality & Usability (9CP) 9 Portfolioprüfung ja 1.0Usable Privacy 3 Portfolioprüfung ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 7 von 9

Entry year Electives: Internet Technology and Architecture Unterbereich von Entry year: Internet Technology and Architecture Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 3 Leistungspunkte bestanden werden. Es dürfen höchstens 3 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Entry year free choice: Internet Technology and Architecture Unterbereich von Entry year: Internet Technology and Architecture Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Exit year: Internet Technology and Architecture Unterbereich von Major: Internet Technology and Architecture Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Alle untergeordneten Studiengangsbereiche müssen bestanden werden.

Exit year Electives: Internet Technology and Architecture Unterbereich von Exit year: Internet Technology and Architecture

Titel LP Prüfungsform Benotet GewichtMobile Services 6 mündlich ja 1.0Network Architectures - Basics 6 schriftlich ja 1.0Network Technologies (Small) 6 Portfolioprüfung ja 1.0Next Generation Networks - Basis 1 9 Portfolioprüfung ja 1.0

Titel LP Prüfungsform Benotet GewichtAd-hoc and Sensor Networks 6 Portfolioprüfung ja 1.0Advanced Algorithmics 9 mündlich ja 1.0Computational Complexity 9 mündlich ja 1.0DBT: Database Technology 6 Portfolioprüfung ja 1.0Digital Communities 6 mündlich ja 1.0Embedded Operating Systems 6 mündlich ja 1.0High-speed Network Technologies with Lab 6 Portfolioprüfung ja 1.0Hot Topics in Next Generation Networks and Future Internet Technologies 3 Portfolioprüfung ja 1.0IDB-PRA: Implementation of a Database Engine (Database Technology Lab) 6 Portfolioprüfung ja 1.0Master Seminar: Operating Complex IT Systems 3 Portfolioprüfung ja 1.0Network Algorithms 6 schriftlich ja 1.0Network Architectures - Master Project 12 Portfolioprüfung ja 1.0Network Architectures - Master Project (small) 6 Portfolioprüfung ja 1.0Network Architectures - Seminar 3 Portfolioprüfung ja 1.0Network Architectures - WirelessLab 9 Portfolioprüfung ja 1.0Network Architectures Specialization (big) 9 mündlich ja 1.0Network Architectures Specialization (small) 6 mündlich ja 1.0Network Technologies (Medium) 9 Portfolioprüfung ja 1.0Network Technologies (Small) 6 Portfolioprüfung ja 1.0Netzwerkarchitekturen - RouterLab 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 1 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 2 9 Portfolioprüfung ja 1.0Operating System Design 6 schriftlich ja 1.0Operating System Project & Seminar 9 Portfolioprüfung ja 1.0Parallel Systems 6 mündlich ja 1.0Parameterized Algorithmics 6 mündlich ja 1.0Performance Evaluation of Computer Communication Systems 6 Portfolioprüfung ja 1.0Project in advanced network technologies 6 Portfolioprüfung ja 1.0Special Topics in Communications Networks and Autonomous Security 3 Portfolioprüfung ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 8 von 9

Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 18 Leistungspunkte bestanden werden. Es dürfen höchstens 18 Leistungspunkte bestanden werden. Module in diesem Studiengangsbereich:

Exit year free choice: Internet Technology and Architecture Unterbereich von Exit year: Internet Technology and Architecture Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Es müssen mindestens 6 Leistungspunkte bestanden werden. Es dürfen höchstens 6 Leistungspunkte bestanden werden.

Masterarbeit Um diesen Studiengangsbereich zu bestehen, müssen die folgenden Bedingungen erfüllt sein: Für diesen Studiengangsbereich sind keine Wahlregeln angegeben. Module in diesem Studiengangsbereich:

Titel LP Prüfungsform Benotet GewichtAd-hoc and Sensor Networks 6 Portfolioprüfung ja 1.0Advanced Algorithmics 9 mündlich ja 1.0Computational Complexity 9 mündlich ja 1.0DBT: Database Technology 6 Portfolioprüfung ja 1.0Digital Communities 6 mündlich ja 1.0Embedded Operating Systems 6 mündlich ja 1.0High-speed Network Technologies with Lab 6 Portfolioprüfung ja 1.0Hot Topics in Next Generation Networks and Future Internet Technologies 3 Portfolioprüfung ja 1.0IDB-PRA: Implementation of a Database Engine (Database Technology Lab) 6 Portfolioprüfung ja 1.0Master Seminar: Operating Complex IT Systems 3 Portfolioprüfung ja 1.0Network Algorithms 6 schriftlich ja 1.0Network Architectures - Master Project 12 Portfolioprüfung ja 1.0Network Architectures - Master Project (small) 6 Portfolioprüfung ja 1.0Network Architectures - Seminar 3 Portfolioprüfung ja 1.0Network Architectures - WirelessLab 9 Portfolioprüfung ja 1.0Network Architectures Specialization (big) 9 mündlich ja 1.0Network Architectures Specialization (small) 6 mündlich ja 1.0Network Technologies (Medium) 9 Portfolioprüfung ja 1.0Network Technologies (Small) 6 Portfolioprüfung ja 1.0Netzwerkarchitekturen - RouterLab 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 1 9 Portfolioprüfung ja 1.0Next Generation Networks and Future Internet Technologies - Project 2 9 Portfolioprüfung ja 1.0Operating System Design 6 schriftlich ja 1.0Operating System Project & Seminar 9 Portfolioprüfung ja 1.0Parallel Systems 6 mündlich ja 1.0Parameterized Algorithmics 6 mündlich ja 1.0Performance Evaluation of Computer Communication Systems 6 Portfolioprüfung ja 1.0Project in advanced network technologies 6 Portfolioprüfung ja 1.0Special Topics in Communications Networks and Autonomous Security 3 Portfolioprüfung ja 1.0

Titel LP Prüfungsform Benotet GewichtMasterarbeit ICT Innovation StuPO 2016 30 Abschlussarbeit ja 1.0

10.11.2016 10:26 Uhr Double-Degree-Masterstudiengang ICT Innovation ... Seite 9 von 9

Lernergebnisse In this seminar you will learn the comprehensive preparation and presentation of a research topic in English. To achieve this you will have toread and categorize a scientific English text, conduct background research and present your findings. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: This course is aimed at master students with a focus on database systems and information management and should be chosen after the2nd master semester. To be able to participate you should have successfully completed 'Database Technology DBT' and one of the'Advanced Information Management AIM' (1,2,3) courses.This seminar can be taken very well by students who are directly in front of their master thesis or have already completed it and areinterested in a doctorate in information management.It is vital that you have a sound understanding of written and spoken English.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

IMSEM - Seminar Hot Topics in Information Management

Modultitel:

IMSEM - Seminar Hot Topics in Information Management

IMSEM - Seminar Hot Topics in Information Management

Leistungspunkte:

3

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Kutsche, Ralf-Detlef

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The exam will be done as a 'portfolio examination', including two deliverable assessments, totaling for 100 portfolio points:- seminar presentation (50 portfolio points)- written seminar report (50 portfolio points)

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Seminar Presentation 50(Deliverable assessment) Written Seminar Report 50

10.11.2016 10:26 Uhr Modulbeschreibung #40001/3 Seite 1 von 1

Lernergebnisse Students who have completed this module can design and analyze algorithms for computational problems arising in various applicationcontexts. When facing a concrete computational problem, they are able to choose, from a wide range of advanced techniques, a strategy toefficiently solve the problem.This includes strategies for solving problems that are computationally hard in the worst case. In particular, the students know about currentresearch topics in algorithmics. Students who have completed this module can design and analyze algorithms for computational problems arising in various applicationcontexts. When facing a concrete computational problem, they are able to choose, from a wide range of advanced techniques, a strategy toefficiently solve the problem.This includes strategies for solving problems that are computationally hard in the worst case. In particular, the students know about currentresearch topics in algorithmics.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: a) obligatory: basic knowledge on algorithm designb) desirable: basic understanding of P vs. NP classification

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Advanced Algorithmics

Modultitel:

Advanced Algorithmics

Höhere Algorithmik

Leistungspunkte:

9

Modulverantwortlicher:

Niedermeier, Rolf

Sekretariat:

TEL 5-1

Ansprechpartner:

Niedermeier, Rolf

URL:

http://www.akt.tu-berlin.de/menue/teaching/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40025/3 Seite 1 von 1

Lernergebnisse Die Studierenden verfügen über Kenntnisse aktueller Forschungsergebnisse und Trends aus dem Bereich des Betriebs komplexer IT-Systeme. Durch die Arbeit im Seminar werden zudem methodische Fertigkeiten in der Aufbereitung von Literatur, des wissenschaftlichenArbeitens, sowie der Präsentation vermittelt. Successful participants of this module have knowledge about recent research results and trends in the domain of operating complex ITsystems. Through the work in this seminar the participant will gain methodological skills in preparing literature of current research topics, thescientific work and the presentation.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Inhaltlich werden Kenntnisse der Module „Verteilte Systeme“ sowie „Betrieb komplexer IT-Systeme“ vorausgesetzt. Kenntnisse aus demModul "Bachelor Seminar Betrieb komplexer IT-Systeme" sind hilfreich.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Master Seminar: Operating Complex IT Systems

Modultitel:

Master Seminar: Operating Complex IT Systems

Master-Seminar: Betrieb komplexer IT-Systeme

Leistungspunkte:

3

Modulverantwortlicher:

Kao, Odej

Sekretariat:

EN 59

Ansprechpartner:

keine Angabe

URL:

http://www.cit.tu-berlin.de

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 1 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

Seminarausarbeitung 45Seminarvortrag 55

10.11.2016 10:26 Uhr Modulbeschreibung #40036/4 Seite 1 von 1

Lernergebnisse The global data volume is increasing dramatically each year. Understanding how to store, process and manage these huge amounts of dataefficiently is a key requirement for software engineers and data analysts in the modern IT world. This lab (following the correspondinglecture topics of DBT-Database Technology) will teach students both the fundamentals of data processing in traditional single-nodedatabase systems and how to scale out these techniques to huge amounts of data in large-scale, distributed environments.During the implementation part of the lab, students will get hands-on experience with important data processing techniques by implementingseveral components of a relational database system and by using parallel programming platforms like Apache Hadoop or Nephele/PACT. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: This course is the base course for master students with focus on database systems and information management and should be attendedin the first semester of the master program. In contrast to the introduction of database systems (MPGI5/DBS), which looks databasesystems from an application programmers point of view, this class focuses on the internals of database systems.To participate, students are required to have successfully completed a Bachelor in computer science with a focus on database systems(participation in the Datenbankpraktikum, Datenbankprojekt).As a mandatory requirement, knowledge of data modeling, relational algebra, and SQL as well as a very good command (!!) of Java, orpossibly C/C++/C#, programming is required to participate in the course.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

IDB-PRA: Implementation of a Database Engine (Database Technology Lab)

Modultitel:

IDB-PRA: Implementation of a Database Engine (Database Technology Lab)

IDB-PRA: Implementation of a Database Engine (Database Technology Lab)

Leistungspunkte:

6

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Alexandrov, Alexander

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) 10 implementation tasks with 10points each

100

10.11.2016 10:26 Uhr Modulbeschreibung #40037/2 Seite 1 von 1

Lernergebnisse Students acquire the following qualifications:- Knowledge of principles of enterprise system design and engineering- Knowledge of service-oriented computing and architectures (Web services platform, REST)- Knowledge of Cloud Computing systems and services- Hands-on experience with cloud system architectures and cloud service management no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of programming with Java, distributed systems and middleware concepts.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Enterprise Computing

Modultitel:

Enterprise Computing

Enterprise Computing

Leistungspunkte:

6

Modulverantwortlicher:

Tai, Stefan

Sekretariat:

EN 14

Ansprechpartner:

Peise, Marco

URL:

http://www.ise.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Insgesamt können 100 Portfoliopunkte erreicht werden.

Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Übungsabgabe 30(Punktuelle Leistungsabfrage) Schriftlicher Test 70

10.11.2016 10:26 Uhr Modulbeschreibung #40103/3 Seite 1 von 1

Lernergebnisse Participants gain knowledge on current research developments in the field of information systems engineering. They deepen theirunderstanding of research and common scientic practices in general. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge on Java, Distributed Systems, and Middleware concepts is required. We expect our students to be willing to work with newtechnologies, systems, and concepts - this also includes LaTeX.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Hot Topics in Information Systems Engineering

Modultitel:

Hot Topics in Information Systems Engineering

Hot Topics in Information Systems Engineering

Leistungspunkte:

3

Modulverantwortlicher:

Tai, Stefan

Sekretariat:

EN 14

Ansprechpartner:

Tai, Stefan

URL:

http://www.ise.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The final marks will comprise a seminar thesis and the presentation of its results. The seminar includes a peer-review phase wherestudents are asked to review theses of other students. The quality of said review is also considered.

Insgesamt können 100 Portfoliopunkte erreicht werden, die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 derFakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Kurzreview anderer Seminarabgaben 10(Ergebnisprüfung) Präsentation 30(Ergebnisprüfung) Schriftliche Ausarbeitung 60

10.11.2016 10:26 Uhr Modulbeschreibung #40109/3 Seite 1 von 1

Lernergebnisse Students acquire knowledge on state-of-the-art enterprise computing and potential advancements beyond. They are able to use thisknowledge to solve problems in this area in practice. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: The module Enterprise Computing is recommended. Knowledge on programming with Java, distributed systems and middleware conceptsis required.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Advanced Enterprise Computing

Modultitel:

Advanced Enterprise Computing

Advanced Enterprise Computing

Leistungspunkte:

6

Modulverantwortlicher:

Tai, Stefan

Sekretariat:

EN 14

Ansprechpartner:

Bermbach, David

URL:

http://www.ise.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Insgesamt können 100 Portfoliopunkte erreicht werden. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 derFakultät IV ermittelt.

Das Prüfungselement Abschlussprüfung ist abhängig von der Teilnehmerzahl entweder mündlich oder schriftlich. Genaueres wird zuBeginn der Veranstaltung angekündigt.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Reading Assignment 10(Ergebnisprüfung) Übungsabgabe 30(Punktuelle Leistungsabfrage) Abschlussprüfung 60

10.11.2016 10:26 Uhr Modulbeschreibung #40127/3 Seite 1 von 1

Lernergebnisse Students gain/are expected to- Knowledge on the topic of privacy with focus on human aspects in information privacy- Conduct research in a group- Give a presentation on a specific topic to an audience- Participate in a one-day workshop Students gain/are expected to- Knowledge on the topic of privacy with focus on human aspects in information privacy- Conduct research in a group- Give a presentation on a specific topic to an audience- Participate in a one-day workshop

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic knowledge in information and communication technologies and HCI is recommended.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Usable Privacy

Modultitel:

Usable Privacy

Usable Privacy

Leistungspunkte:

3

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hirsch, Tobias

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Seminar Usable PrivacyThe cumulative grade for this module is the result form the individual performances during the courses and other academic activities.

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Presentation 30(Deliverable assessment) Written assignment 60(Learning process review) Tests at the end of each session 10

10.11.2016 10:26 Uhr Modulbeschreibung #40180/2 Seite 1 von 1

Lernergebnisse Students gain- Understanding of the most important principles of human-computer interaction.- Basic knowledge of multimodality and multimodal interacttion.- Basic knowledge of the gestural interaction.- Basic knowledge of speech production and perception.- Basic knowledge of speech recognition, acoustic feature extraction, and sequence modeling.- Basic knowledge of audio-visual and multimodal speech recognition.- Basic knowledge of machine learning and data mining.- Basic knowledge of machine translation and dialogue systems.- Presentation and knowledge transfer skills. Students will be able to- use the learned knowledge for designing exemplary human-computer interfaces no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic knowledge of communications engineering and digital signal processing.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Computer-Supported Interaction

Modultitel:

Computer-Supported Interaction

Computer-Supported Interaction

Leistungspunkte:

3

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hinterleitner, Florian

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40181/3 Seite 1 von 1

Lernergebnisse - This course introduces the major ideas used today in the implementation of programming language compilers. Students will learn how aprogram written in a high-level language designed for humans translates into a program written in low-level assembly. Students will be able to:- Understand how real compilers work and how high-level language program are systematically translated into low-level assembly;- Become familiar with compiler analyses, intermediate representations and code generation;- Improve programming ability;- Implement compiler analysis, transformation and code generation approaches based on real compiler infrastructures;- Study recent advances in compiler design.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: - Knowledge of C programming- An introductory course on computer architecture is recommended

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Compiler Design

Modultitel:

Compiler Design

Compilerentwurf

Leistungspunkte:

6

Modulverantwortlicher:

Juurlink, Bernardus

Sekretariat:

EN 12

Ansprechpartner:

Cosenza, Biagio

URL:

http://www.aes.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Grading system 2 will be used.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) 4 assigments, equally weighted 50(Examination) Final test 50

10.11.2016 10:26 Uhr Modulbeschreibung #40197/2 Seite 1 von 1

Lernergebnisse Within the last decade, telecommunication networks have undergone a huge transformation from voice to data transmission. This isreflected in a set of new protocols for data transmission as well as new control paradigms. Often these protocols are extensions of the well-known Ethernet and IP families that provide manageability, monitoring and reconfigurability. The advent of Software-Defined Networks(SDN) and Network Functions Virtualization (NFV) means that network operators require new programming skills to quickly understand andinfluence the behavior of a network under load or under attack.Students completing this module will be familiar with Telecom network protocols ranging geographically from the home router to the corenetwork.They will be able to configure primary and backup paths, write applications for the Open Network Operating System (ONOS) networkcontroller, and detect a mis-configured network device. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: BSc module „Kommunikationsnetze” or similar knowledge. Knowledge of architecture and programming of network systems is of benefit.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

High-speed Network Technologies with Lab

Modultitel:

High-speed Network Technologies with Lab

High-speed Network Technologies mit Praktikum

Leistungspunkte:

6

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Woesner, Hagen

URL:

http://www.tu-berlin.de/?108249#40279

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) PR Laboratory - 7 Labassignments, 3 points each

21

(Examination) PR Laboratory - 2 Oral Consultations, 7 pointseach

14

(Examination) PR Laboratory - Written Test 15(Examination) VL High-speed Network Technologies - oralconsultation

50

10.11.2016 10:26 Uhr Modulbeschreibung #40279/1 Seite 1 von 1

Lernergebnisse Students completing the module will gain the understanding of basic principles and technologies behind self-organizing wireless sensornetworks, through a balanced combination of lectures and practical work with modern sensor node hardware. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: BSc module „Kommunikationsnetze” or similar knowledge is required. Knowledge of architecture and programming of embedded systems isof benefit.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Ad-hoc and Sensor Networks

Modultitel:

Ad-hoc and Sensor Networks

Ad-hoc und Sensor Netzwerke

Leistungspunkte:

6

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Handziski, Vlado

URL:

http://www.tkn.tu-berlin.de/?108248#adhsn

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

In total 100 Portfolio points can be obtained. The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme(Notenschlüssel) 1 of Faculty IV. The individual grades will be obtained as specified in the table below.

Further details:

VL: Final lecture written test: The students take part in a < 90 min final test that checks the overall level of acquired knowledge from the AdHoc and Sensor Networks lecture.

PR: Lab assignments: Organized in small groups (3-4 persons), the students are asked to jointly absolve a set of lab assignments thatinvolve in-class programming assignments using state of the art sensor network hardware and software, and homework tasks (some ofthem individually, some of them as a group). Evaluated is the correctness of the provided answers, the correctness and the quality of thecode for the programming assignments. Each lab is assessed with a three-level scale: not-satisfactory, satisfactory and excellent.

PR: Final lab project: After the completion of the individual lab assignments, the lab groups are asked to design, develop and demonstratea relatively simple but complete sensor networks application that involves data acquisition, processing and communication. Evaluated isthe final "project presentation" (quality of the content and coverage, presentation organization and style, capability to answer follow-upquestions), and the "project demo" (general functionality, achievement of design goals, effective use of HW and SW, team work, codequality, documentation, effective use of version control tools).

PR: Final lab review: The students take part in a final review that checks the overall level of acquired knowledge from the Sensor NetworksLab. Evaluated is the familiarity with the Lab HW and SW and the familiarity with the the solutions of the individual Lab assignments.

Students are asked to self-evaluate the relative contribution of each team member as part of the team, which is considered in the formationof the final individual marks.

Prüfungselement Kategorie Gewicht Dauer

PR Sensor Networks Lab - 7 Lab assignments, 3 pointseach (Deliverable assessment)

21

PR Sensor Networks Lab - Final lab review (Learningprocess review)

20

PR Sensor Networks Lab - Project demo (Deliverableassessment)

5

PR Sensor Networks Lab - Project presentation (Deliverableassessment)

4

VL Ad-hoc and Sensor Networks - Final lecture written test(Examination)

50

10.11.2016 10:26 Uhr Modulbeschreibung #40304/5 Seite 1 von 1

Lernergebnisse - To become familiar with the architecture and organization of recent superscalar and VLIW processors and multicores.To be able to select, given functional and non-functional requirements, the most appropriate computer architecture.To be able to optimize code for a particular processor using, e.g., code scheduling and loop unrolling.To become familiar with parallel computer architectures, cache coherence, memory consistency, etc.To be able to design a memory hierarchy that optimizes latency, throughput, and or energy dissipation.To be able to study recent advances in computer architecture, classify recent research articles, and report about it, both verbally and inwriting.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: * An introductory course on computer architecture (e.g. "Rechnerorganisation") is recommended* Affinity to low-level programming

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Advanced Computer Architecture

Modultitel:

Advanced Computer Architecture

Rechnerorganisation Vertiefung

Leistungspunkte:

6

Modulverantwortlicher:

Juurlink, Bernardus

Sekretariat:

EN 12

Ansprechpartner:

Juurlink, Bernardus

URL:

http://www.aes.tu-berlin.de

Modulsprache:

Deutsch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Grading system 2 will be used:

95% or more1.090% or more1.385% or more1.780% or more2.075% or more2.370% or more2.765% or more3.060% or more3.355% or more3.750% or more4.0Less than 50%5.0

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Practical Assignments(2x 15points, 2x 10 points)

50

(Examination) Final Test 50

10.11.2016 10:26 Uhr Modulbeschreibung #40307/3 Seite 1 von 1

Lernergebnisse The participants of this module will achieve deep conceptual, methodical, technical and practical knowledge in requirements analysis,design, architecture and development of heterogeneous and distributed information systems. This includes firstly classical knowledge aboutfederated databases and mediator-based information systems (tight or loose coupling wrt. the dimensions of distribution, heterogeneity andautonomy). Secondly, different paradigms of heterogeneous information infrastructures and their management (e.g. P2P) andinteroperability architectures (‘middleware’) will be investigated. Finally, modern model-based concepts for the development, integration andevolution of arbitrary information infrastructures, and –under this conceptual frame– model, metamodel, and metadata management as wellas semantic concepts will be discussed and brought into practical experience by some larger project-like group work. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Prerequisites: The basic modules in the Bachelor Curriculum in “Informatik”, or "Technische Informatik" or "Wirtschaftsinformatik" or"Wirtschaftsingenieurwesen"; particularly knowledge in Database Systems/ Information Modeling and Software Engineering / Programmingis required. The AIM-1 / HDIS course will be given in English language, thus fluency in English is required!

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Advanced Information Management 1 (AIM-1) - Heterogeneous and Distributed Information

Systems (HDIS)

Modultitel:

Advanced Information Management 1 (AIM-1) - Heterogeneous and DistributedInformation Systems (HDIS)

Advanced Information Management 1 (AIM-1) - Heterogeneous and DistributedInformation Systems (HDIS)

Leistungspunkte:

6

Modulverantwortlicher:

Kutsche, Ralf-Detlef

Sekretariat:

EN 7

Ansprechpartner:

Kutsche, Ralf-Detlef

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The grade will be given by fulfilling all required tasks during the course (portfolio exam): seminar work including the oral presentation andthe final report; home/lab exercises including presentation and the semester project including the final report/presentation.

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Homework Presentation 10(Deliverable assessment) Project Work: Software,Documentation, Presentation

25

(Deliverable assessment) Seminar Talk 25(Deliverable assessment) Written Seminar Report 40

10.11.2016 10:26 Uhr Modulbeschreibung #40309/3 Seite 1 von 1

Lernergebnisse Durch die technologischen Entwicklungen der letzten Jahre entstehen immer mehr Anwendungen, indenen kontinuierlich Daten produziert werden, die auch nur für eine gewisse Zeit aktuell bzw. gültig sind. Derartige Anwendungen sinddadurch gekennzeichnet, dass sie Ströme von Daten verarbeiten müssen.Die Studierenden haben vertiefte konzeptionelle, methodische und praktischeKenntnisse für die Verarbeitung von Datenströmen an Beispielen aus den verschiedenenAnwendungsbereichen. Through the technological advances in the last few years more and more applications are being created that constantly generate data whichis only relevant for a certain time frame. Because of this, this type of application has to be able to handle various streams of data.You will gain conceptual, methodological and practical skills in the area of processing data streams, by using examples from variousapplication areas.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Diese Lehrveranstaltung wendet sich an Master-Studenten mit Schwerpunkt im BereichDatenbanksysteme und Informationsmanagement ab dem 1. (Master-)Semester. Die Voraussetzungensind das abgeschlossene Bachelorstudium und Kenntnisse der modernen Modellierungssprachen unddes klassischen Datenbankmanagements. Die Literatur für diese Veranstaltung ist in vielen Fällen inenglischer Sprache abgefasst, daher sind gute Englischkenntnisse erforderlich.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Advanced Information Management 2 - Management of Data Streams

Modultitel:

Advanced Information Management 2 - Management of Data Streams

Advanced Information Management 2 - Management of Data Streams

Leistungspunkte:

6

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Borusan, Alexander

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Deutsch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40310/3 Seite 1 von 1

Lernergebnisse The last decade was marked by the digitalization of virtually all aspects of modern society. Today, businesses, government institutions, aswell as science and engineering organizations, among others face an avalanche of digital data on a daily basis. In order to derive insightfrom all of this data, society needs individuals with a strong foundation in scalable data science. In this course students will learn aboutpopular scalable data analysis systems and scalable data analytics methods and gain practical experience in conducting scalable datascience. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Computer science topics addressed in TU Berlin modules in the Bachelor’s curriculum, particularly, the database course (“InformationSystems and Data Analysis”) or the equivalent, as well as good Java programming skills are required. Basic knowledge in linear algebra,numerical analysis, probability, and statistics are strongly recommended. Furthermore, it is preferable if students have already completed(or are currently enrolled in) a machine-learning course. Since the course will be offered in English, fluency in English is also required.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Advanced Information Management 3 (AIM-3) Scalable Data Science: Systems & Methods

(SDSSM)

Modultitel:

Advanced Information Management 3 (AIM-3) Scalable Data Science: Systems& Methods (SDSSM)

Advanced Information Management 3 (AIM-3) Scalable Data Science: Systems& Methods (SDSSM)

Leistungspunkte:

6

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Soto, Juan

URL:

http://www.dima.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio exam (worth 100 points) is comprised of three parts, namely: (i) written homework (30 points), (ii) in-class presentations (20portfolio points), and (iii) a written exam (50 portfolio points).

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Homework 30(Deliverable assessment) in-class presentations 20(Examination) Written test 50

10.11.2016 10:26 Uhr Modulbeschreibung #40311/4 Seite 1 von 1

Lernergebnisse Graduates of this module have experience with methods and techniques for the analysis of embedded systems and how these systems canbe optimized for special architectures. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge in the basics of software engineering for embedded Systems (as teached in the Software Engineering Eingebetteter Systemebachelor course) are benefical.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Analysis and Optimization of Embedded Systems

Modultitel:

Analysis and Optimization of Embedded Systems

Analyse und Optimierung eingebetteter Systeme

Leistungspunkte:

6

Modulverantwortlicher:

Glesner, Sabine

Sekretariat:

TEL 12-4

Ansprechpartner:

Klös, Verena

URL:

keine Angabe

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) Homework in training course Analysis and Optimization of Embedded Systems

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40326/3 Seite 1 von 1

Lernergebnisse - Knowledge and practical experiences in the realm of designing embedded processor architectures and its programming are gained.Students are able to plan, coordinate and carry out hardware/software co-design, programming in hardware description languages andsystem-level programming, as well as team management and coordination in a project. The course is principally designed to imparttechnical skills 35%, method skills 15%, system skills 15%, social skills 35%

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge about computer architecture and hardware description languages (VHDL or Verilog) are obligatory (e.g. Technische Grundlagender Informatik 2 (TechGI2)). Desirable are practical experiences in synthesis of hardware descriptions or microcontroller or system-levelprogramming.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Applied Embedded Systems Project

Modultitel:

Applied Embedded Systems Project

Projekt angewandte eingebettete Systeme

Leistungspunkte:

6

Modulverantwortlicher:

Juurlink, Bernardus

Sekretariat:

EN 12

Ansprechpartner:

Juurlink, Bernardus

URL:

http://www.aes.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Grading system 2 will be used:

95% or more1.090% or more1.385% or more1.780% or more2.075% or more2.370% or more2.765% or more3.060% or more3.355% or more3.750% or more4.0Less than 50%5.0

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Implementation 40(Deliverable assessment) Project documentation,presentation(s), etc

35

(Learning process review) Participation in project work 25

10.11.2016 10:26 Uhr Modulbeschreibung #40335/2 Seite 1 von 1

Lernergebnisse Participants of this seminar will acquire knowledge about recent research results and trendsin the analysis of web-scale data. Through the work in this seminar, students will learn thecomprehensive preparation and presentation of a research topic in this field. In order toachieve this, students will get to read and categorise a scientific paper, conductbackground literature research and present as well as discuss their findings.After the course, students will be able to critically read and evaluate scientific publications,and to conduct background research. They will be capable of preparing for and giving oralpresentations on research topics for an expert audience, of analyzing the state of the art of aresearch topic, and of summarizing it in a scientific paper. They should also understandtechniques used in the scientific community like peer reviews, conference presentations, anddefenses of the findings after their presentation, as well as they should understand methodsfor large-scale data analytics. The course is principally designed to impart:Technical skills: 50x Methodological skills: 20x System skills: 10x Social skills: 20x no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: This course is aimed at master students with a focus on database systems and information management and should be chosen after the2nd master semester. To be able to participate you should have successfully completed 'Database Technology DBT' and one of the'Advanced Information Management AIM' (1,2,3) courses.In the ideal case this seminar should be taken by students who are directly in front of their master thesis, or have already completed it andare interested in a doctorate in information management.It is vital that you have a sound understanding of written and spoken English.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

BDASEM - Big Data Analytics Seminar

Modultitel:

BDASEM - Big Data Analytics Seminar

BDASEM - Big Data Analytics Seminar

Leistungspunkte:

3

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Alexandrov, Alexander

URL:

http://www.dima.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The exam will be done as a 'portfolio examination', including two deliverable assessments, totaling for 100 portfolio points:- seminar presentation (50 portfolio points)- written seminar report (50 portfolio points)

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) presentation 50(Deliverable assessment) written seminar report 50

10.11.2016 10:26 Uhr Modulbeschreibung #40353/3 Seite 1 von 1

Lernergebnisse - Expertise to assess existing and future approaches to identify and verify users- Knowledge of current technical approaches to classify biometrical features- Ability to do critical (online) literature research- Presentation skills - Expertise to assess existing and future approaches to identify and verify users- Knowledge of current technical approaches to classify biometrical features- Ability to do critical (online) literature research- Presentation skills

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Desirable: Basic signal processing skills and/or usability engineering knowledge

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Biometric Identification

Modultitel:

Biometric Identification

Leistungspunkte:

3

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hirsch, Tobias

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

The cumulative grade for this module is the result form the following individual performances during the courses and other academicactivities:

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Homework 22(Deliverable assessment) Oral Presentation 30(Deliverable assessment) Written Version 30(Examination) Multiple Choice-Test 18

10.11.2016 10:26 Uhr Modulbeschreibung #40361/4 Seite 1 von 1

Lernergebnisse Absolventen dieses Moduls verfügen nach dem erfolgreichen Abschluss des Moduls über Kenntnisse über die Prinzipien undCharakteristiken von Cloud Computing, die sowohl auf theoretischem als auch praktischem Gebiet vermittelt werden. Ferner wird dasVerständnis für kritische Fragestellungen in diesem Bereich und aktuelle Lösungsansätze vermittelt. Students possess knowledge of the principles and characteristics of cloud computing at the practical, as well as, the theoretical level.Furthermore they understand critical questions and current solutions in this area.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Übungsaufgaben Cloud ComputingInhaltlich werden Kenntnisse des Moduls „Distributed Systems“ vorausgesetzt, sowie solide Programmiererfahrungen in derProgrammiersprache Java.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Cloud Computing

Modultitel:

Cloud Computing

Cloud Computing

Leistungspunkte:

6

Modulverantwortlicher:

Kao, Odej

Sekretariat:

EN 59

Ansprechpartner:

keine Angabe

URL:

http://www.cit.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40368/5 Seite 1 von 1

Lernergebnisse On successful completion, students will be able to:- estimate the computational costs for solving fundamental problems- classify discrete computational problems according to their computational complexity using reductions and standard complexity classes- understand structural properties of complexity classes- make qualitative and quantitative statements about computational complexity questions On successful completion, students will be able to:- estimate the computational costs for solving fundamental problems- classify discrete computational problems according to their computational complexity using reductions and standard complexity classes- understand structural properties of complexity classes- make qualitative and quantitative statements about computational complexity questions

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: a) obligatory: Basic course on automata and complexityb) desirable: Basic knowledge on algorithms

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Computational Complexity

Modultitel:

Computational Complexity

Komplexitätstheorie

Leistungspunkte:

9

Modulverantwortlicher:

Niedermeier, Rolf

Sekretariat:

TEL 5-1

Ansprechpartner:

Thielcke, Christlinde

URL:

http://www.akt.tu-berlin.de/menue/teaching

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40379/5 Seite 1 von 1

Lernergebnisse - Knowledge about the design of embedded arithmetic circuits as well as the scientific background of these circuits. This will help thestudents to gain more details about the design of processing units and more practical experience in the implementation of digital systems.The students will increase their experience in the use of hardware description languages to model and implement digital systems.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: -Basic knowledge of digital design and digital design process.-Basic knowledge of number systems and number representation of digital computers.-knowledge of VHDL/FPGA is an advance.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Computer Arithmetic: Circuit Perspective

Modultitel:

Computer Arithmetic: Circuit Perspective

Computerarithmetik: Schaltkreisperspektive

Leistungspunkte:

6

Modulverantwortlicher:

Juurlink, Bernardus

Sekretariat:

EN 12

Ansprechpartner:

Juurlink, Bernardus

URL:

http://www.aes.tu-berlin.de

Modulsprache:

Deutsch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Grading system 2 will be used.

Prüfungselement Kategorie Gewicht Dauer

(Learning process review) Lab work (4x, each 10 points) 40(Deliverable assessment) Assignments (5x, each 4 points) 20(Deliverable assessment) Quiz 5(Examination) Final Test 35

10.11.2016 10:26 Uhr Modulbeschreibung #40380/3 Seite 1 von 1

Lernergebnisse Die Studierenden haben vertiefte Kenntnisse der Computergraphik. Ihre erworbenen Kenntnisse und Fähigkeiten können sie überzeugendpräsentieren und vermitteln. Students have an in-depth understanding of computer graphics. They are able to present and convey their acquired knowledge and skillsconvincingly.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Inhaltlich werden grundlegende Kenntnisse der Computergraphik vorausgesetzt, wie sie z.B. im Master Modul Computergrafik I vermitteltwerden. Kenntnisse aus der linearen Algebra, dem wissenschaftlichen Rechnen sowie Algorithmen und Datenstrukturen sind erwünscht. Basic knowledge of computer graphics is required, such as the contents of the Master module Computer Graphics I. Knowledge in linearalgebra, scientific computing, and algorithms/data structures is recommended.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Computergraphik Seminar A

Modultitel:

Computergraphik Seminar A

Computer Graphics Seminar A

Leistungspunkte:

3

Modulverantwortlicher:

Alexa, Marc

Sekretariat:

MAR 6-6

Ansprechpartner:

Fer-Arslan, Gaelle

URL:

http:// http://www.cg.tu-berlin.de

Modulsprache:

Deutsch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 1 der Fakultät IV ermittelt.

Implementierung, Vorträge (Zwischen- und Endpräsentation) und Seminardokumentation können in deutscher oder englischer Spracheerfolgen.Implementation, talks (interim and final presentations) and seminar documentation can be carried out in German or English.

1. Implementierung: Die Studierenden bearbeiten eine ausgewählte Fragestellung und entwickeln auf der Basis ihrer Erkenntnisse eineprototypische Implementierung.

2. Zwischenpräsentation: Die ersten Erkenntnisse und Zwischenergebnisse zum bearbeiteten Thema werden mündlich vorgetragen.Entsprechende Fragen sind dann mündlich zu beantworten.

3. Seminardokumentation: Die Studierenden fassen ihre finalen Erkenntnisse, Anwendungsmethoden und Endergebnisse in einerschriftlichen Seminardokumentation zusammen.

4. Endpräsentation: Die finalen Erkenntnisse und Endergebnisse der Seminardokumentation werden mündlich vorgetragen. Fragen zumbearbeiteten Thema sind dann mündlich zu beantworten.

Prüfungselement Kategorie Gewicht Dauer

1. (Ergebnisprüfung/Deliverable assessment)Implementierung/Implementation

50

2. (Ergebnisprüfung/Deliverable assessment)Zwischenpräsentation/Interim Presentation

10

3. (Ergebnisprüfung/Deliverable assessment)Seminardokumentation/Seminar Documentation

20

4. (Ergebnisprüfung/Deliverable assessment)Endpräsentation/Final Presentation

20

10.11.2016 10:26 Uhr Modulbeschreibung #40385/4 Seite 1 von 1

Lernergebnisse The global data volume is increasing dramatically each year. Understanding how to store, process and manage these huge amounts of dataefficiently is a key requirement for software engineers and data analysts in the modern IT world. This course will teach students both thefundamentals of data processing in traditional single-node database systems and how to scale out these techniques to huge amounts ofdata in large-scale, distributed environments. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: This course is the base course for master students with focus on database systems and information management and should be attendedin the first semester of the master program. In contrast to the introduction of database systems(MPGI5/DBS/Informationssystemse&Datenanalyse), which looks at database systems from an application programmers point of view, thisclass focuses on the internals of database systems. To participate, students are required to have successfully completed a Bachelor incomputer science with a focus on database systems (participation in the Datenbankpraktikum, Datenbankprojekt). Knowledge of datamodeling, relational algebra, and SQL as well as a very good command of Java, or possibly C/C++/C#, programming is required toparticipate in the course. Due to capacity reasons, the class is limited to at most 60 participants.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

DBT: Database Technology

Modultitel:

DBT: Database Technology

DBT: Database Technology

Leistungspunkte:

6

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Markl, Volker

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Assessment of 4 homeworkexercises with 5 pts.

20

(Examination) End term test 40(Examination) Mid term test 40

10.11.2016 10:26 Uhr Modulbeschreibung #40405/5 Seite 1 von 1

Lernergebnisse Students who have successfully finished this module have an overview of current and future concepts for digital communities. They havedeveloped an understanding of the principles of social network analysis, and have learned about the concepts of digital identities and onlinesocial networks. However, they are also aware of the limitations and privacy issues of digital communities. Furthermore, they havedeveloped an understanding of related topics such as reputation and recommender systems and online voting. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Mandatory: basic knowledge of computer science.Desirable: knowledge of graph theory, basic programming skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Digital Communities

Modultitel:

Digital Communities

Digital Communities

Leistungspunkte:

6

Modulverantwortlicher:

Küpper, Axel

Sekretariat:

TEL 19

Ansprechpartner:

Ruppel, Peter

URL:

http://www.snet.tu-berlin.de/digitalcommunities

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40407/2 Seite 1 von 1

Lernergebnisse Qualification aim of this module is to impart methods for signal processing, image enhancement, feature extraction and segmentation. Thealumni have learned and practiced to use their skills in multifaceted application areas. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: none

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Digital Image Processing

Modultitel:

Digital Image Processing

Digital Image Processing

Leistungspunkte:

6

Modulverantwortlicher:

Hellwich, Olaf

Sekretariat:

MAR 6-5

Ansprechpartner:

Dennert, Marion

URL:

http://www.cv.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) Homework Digital Image Processing

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40414/5 Seite 1 von 1

Lernergebnisse Students who have successfully finished this module know the most important basic algorithms for distributed systems and their respectiveproperties. They know typical structures of distributed algorithms and can evaluate the complexity, scalability and fault tolerance properties.The students can apply their knowledge for selecting appropriate algorithms while designing distributed systems. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic skills in distributed systems.Sufficient knowledge about the contents ofboth courses "Systemprogrammierung" and "Rechnernetze und verteilte Systeme"or both courses "Technische Grundlagen der Informatik für Wirtschaftsinformatiker" and "Programmierpraktikum".

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Distributed Algorithms

Modultitel:

Distributed Algorithms

Verteilte Algorithmen

Leistungspunkte:

6

Modulverantwortlicher:

Heiß, Hans-Ulrich

Sekretariat:

EN 6

Ansprechpartner:

keine Angabe

URL:

http://www.kbs.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) [KBS] Distributed Algorithms Assignments

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40415/3 Seite 1 von 1

Lernergebnisse Students who have successfully finished this module have an advanced knowledge of operating systems for embedded systems. They areaware of the specific design aspects (like realtime behavior, energy consumption, schedulability, fault tolerance) and know of theirinterdependencies. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic (undergraduate) course on operating systems is required to follow the lectures.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Embedded Operating Systems

Modultitel:

Embedded Operating Systems

Eingebettete Betriebssysteme

Leistungspunkte:

6

Modulverantwortlicher:

Heiß, Hans-Ulrich

Sekretariat:

EN 6

Ansprechpartner:

keine Angabe

URL:

http://www.kbs.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40440/2 Seite 1 von 1

Lernergebnisse This module’s qualification aims are:1. Understanding of security relevant interfaces (hard- and software) of (embedded) computer systems2. Practical experience in identifying, exploiting, and fixing of vulnerabilities in hard- and software3. A profound evaluation of system security no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Prerequisites:• knowledge equivalent to the "Software Security" lecture• familiarity with Unix/Linux operating system primitives (e.g. using a command line) Recommended additional skills:• basic networking concepts and tools (DNS, DHCP, NAT, ...)• low-level programming concepts (pointers, registers, stack vs. heap, ...)• basic concepts of cryptography In order to complete the assignments, each group needs at least one computer with administrator privileges (i.e. being able to log intouniversity computers is insufficient) preferrably running Linux. It is possible to complete the tasks while using Windows or MacOS as well,but the teaching staff cannot provide guidance on those operating systems.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Embedded Systems Security Labor

Modultitel:

Embedded Systems Security Labor

Embedded Systems Security Labor

Leistungspunkte:

6

Modulverantwortlicher:

Seifert, Jean-Pierre

Sekretariat:

TEL 17

Ansprechpartner:

Nordholz, Jan Christoph

URL:

keine Angabe

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

This module will be tested as a portfolio exam, i.e. you accumulate points during the course of the module for the following partialperformances:

• (Practical Course) 6x practical assignments: up to 20 points each

The total number of points (0-120) is then scaled linearly to the range (0-100) and converted into a final grade according to ConversionTable 2 of School IV.

Prüfungselement Kategorie Gewicht Dauer

(deliverable assessment) 6 assignments, 20 pts each 120

10.11.2016 10:26 Uhr Modulbeschreibung #40441/3 Seite 1 von 1

Lernergebnisse Die Studierenden können im Rahmen eines großen Systementwicklungsprojekts ein aktuelles Thema im Informationsmanagementbereichsystematisch analysieren, modellieren sowie problemorientiert im Team eine Lösung entwickeln und implementieren. Sie sind in der Lage,als Teammitglied in Eigenverantwortung Projektorganisation, Qualitätssicherung und Dokumentation zu betreiben. Insgesamt soll dieQualität der Lösungsmodelle und -entwicklung durch theoretische Analyse, systematische Experimente und Tests bewertet werden. As part of a large system development project the students get the opportunity to systematically analyse, model and develop (problem-oriented) a solution for a hot topic in information management. They are able to operate as a team member and are responsible for projectorganization, quality assurance and documentation. Overall, the quality of the solution and the development should be done throughtheoretical analysis, systematic experiments and tests.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Entrance requirement for the project is the successful completion of the module DBT - Database Technology (or equivalent).

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

IMPRO - Project Hot Topics in Information Management

Modultitel:

IMPRO - Project Hot Topics in Information Management

IMPRO - Project Hot Topics in Information Management

Leistungspunkte:

6

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Hemsen, Holmer

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) documentation 10(Deliverable assessment) final presentation 10(Deliverable assessment) final project report 10(Deliverable assessment) modelling and development of theprototype (incl. test cases)

50

(Learning process review) active collaboration in projectteam work (incl. adherence to the scheduled progress plan)

10

(Learning process review) presentation of project poster 10

10.11.2016 10:26 Uhr Modulbeschreibung #40490/2 Seite 1 von 1

Lernergebnisse The major goal of this seminar is the intensive discussion of current questions in the field of Next Generations Networks and the FutureInternet. Graduates of this module are endued with competences regarding current research activities, research results and trends in thecontext of classic telecommunication systems, IP based Next Generation Networks and the Future Internet. Furthermore, the seminarteaches the students methodical competences to do literature research and presentations in a scientific environment independently. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of technologies in the area of wired and wireless communication networks is required (e.g. "Telekommunikationsnetze" or "NextGeneration Network Technologies & Services (NGN)").

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Hot Topics in Next Generation Networks and Future Internet Technologies

Modultitel:

Hot Topics in Next Generation Networks and Future Internet Technologies

Hot Topics in Next Generation Networks and Future Internet Technologies

Leistungspunkte:

3

Modulverantwortlicher:

Magedanz, Thomas

Sekretariat:

MAR 5-5

Ansprechpartner:

Willner, Alexander

URL:

http://av.tu-berlin.de/teaching

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The seminar consists of two parts and in total you can acquire 100 points (Portfoliopunkte).The final grade of the module is determined completely by the result of the seminar, based onthe School IV grading system 2 (§ 47 (2) AllgStuPO).

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) presentation 50(Deliverable assessment) written report 50

10.11.2016 10:26 Uhr Modulbeschreibung #40491/6 Seite 1 von 1

Lernergebnisse Ability to analyze the state of the art of a research topic and to summarize it for an expert audience. The students learn to find and toclassify publications on research, to give oral presentations covering a complex topic, and to write a esearch paper. The students getfamiliar with techniques used in the scientific community like peer reviews, conference presentations, and defending the finding in adiscussion after the presentation. The course is principally designed to impart: technical skills 10%, method skills 45%, system skills 0%, social skills 45%. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Sound knowledge of operating systems, embedded operating systems, or security aspects (depending on the actual topics of the seminar).

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Hot Topics in Operating Systems and Distributed Systems

Modultitel:

Hot Topics in Operating Systems and Distributed Systems

Aktuelle Themen in Betriebssystemen und verteilten Systemen

Leistungspunkte:

3

Modulverantwortlicher:

Heiß, Hans-Ulrich

Sekretariat:

EN 6

Ansprechpartner:

keine Angabe

URL:

http://www.kbs.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Insgesamt können 100 Portfoliopunkte erreicht werden.

Paper / schriftliche Ausarbeitung: 50 PunkteTalk / Referat: 50 Punkte

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

After successful completion, a seminar certificate will be issued which meets requirements of the master's program.

Prüfungselement Kategorie Gewicht Dauer

Paper / schriftliche Ausarbeitung 50Talk / Referat 50

10.11.2016 10:26 Uhr Modulbeschreibung #40492/2 Seite 1 von 1

Lernergebnisse In this course you will learn to systematically analyze a current issue in the information managementarea and to develop and implement a problem-oriented solution as part of a team. You will learn tocooperate as team member and to contribute to project organization, quality assurance and documentation. The quality of your solution hasto be proven through analysis, systematic experiments and test cases. Examples of IMPRO projects carried out in recent semesters are atool used to analyse Web 2.0 Forum data, an online multiplayer game for mobile phones, implementation and analysis of new join methodsfor a cloud computing platform or the development of data mining operations on the massively parallel system Hadoop as part of theApache open source project Mahout.After the course, students will be able to understand methods for large scale data analytics and tosolve large scale data analytics problems. They will be capable of designing and implementing largescale data analytics solutions in a collaborative team. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge from the complete Bachelor program (Informatik or Technische Informatik) is required, aswell as linear algebra and statistics. Depending on the topic, additional prerequisites may be required, e.g. „DBT - Database Technology" Solid programming skills in at least one of the following programming languages: Java, C++, Scala, Python.Basic knowledge in functional programming.Basic knowledge in distributed source control management systems (Git, Mercurial) and software processes like Scrum.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

BDAPRO - Big Data Analytics Project

Modultitel:

BDAPRO - Big Data Analytics Project

BDAPRO - Big Data Analytics Project

Leistungspunkte:

9

Modulverantwortlicher:

Markl, Volker

Sekretariat:

EN 7

Ansprechpartner:

Alexandrov, Alexander

URL:

http://www.dima.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The overall grade for the module consists of the results of the course work ('portfolio exam'). The following are included in the final grade:1. Prototype with test cases and documentation (30p.)2. Experiment design and execution (20p.)3. Intermediate presentation (10p.)4. Experiments analysis (20p.)5. Final presentation (20p.)

The final grade according to § 47 (2) AllgStuPO will be calculated with the faculty grading table 2.(Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.)

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Experiments analysis 20(Deliverable assessment) Final presentation 20(Deliverable assessment) Intermediate presentation 10(Learning process review) Experiment design and execution 20(Learning process review) Prototype with test cases anddocumentation

30

10.11.2016 10:26 Uhr Modulbeschreibung #40494/4 Seite 1 von 1

Lernergebnisse Nach Abschluss dieses Moduls haben die Teilnehmer praktische Erfahrungen im Design, der Implementierung und dem Testen vonApplikationen im Internet of Services in einem kleinen Team gesammelt und dadurch Basiskenntnisse und Einblicke in den BereichenMobile Endgeräte, Kommunikation und Dienste, Location-based Services, Cloud Computing oder Digital Communities erlangt. Darüberhinaus haben die Teilnehmer wichtige Erfahrungen in der Organisation und Durchführung von IT Projekten gesammelt, was auchControlling, Reporting, Planning und Kommunikation mit externen Partnern beinhaltet. After completing this moldule, the participants have gained practical experience in designing, implementing, and testing of applications forthe internet of services within a small team and therefore gained significant knowledge and insights within the areas of mobile devices,communication and services, location-based services, cloud computing and digital communities. Furthermore, the participants have gainedimportant knowledge of how to organize and realize IT projects, including controlling, reporting, planning, and communicating with externalpartners.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: - Programming skills- Communication skills in english- Autonomous working style- Basic knowledge in the area of the chosen task

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Internet of Services Lab

Modultitel:

Internet of Services Lab

Internet of Services Lab

Leistungspunkte:

9

Modulverantwortlicher:

Küpper, Axel

Sekretariat:

TEL 19

Ansprechpartner:

Grunert, Kai

URL:

http://www.snet.tu-berlin.de/internet-of-services

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

All in all 100 portfolio points can be achieved:

The final grade under the terms of § 47 (2) AllgStuPO is calculated according to the grading scheme no. 2 of faculty IV.

* Practical Implementation: the outcome of the project is assessed. For that the annotated source code, the reusability, the quality and thequantity of the resulting software is evaluated.

* Milestone Presentations: the presentation of the project in front of the whole course is assessed. For that the structure, presentation andlinguistic style, the slide design, the selected topics, the time management and the Q&A session is evaluated.

* Written Report: a written report that contains a description of the project is assessed. For that the structure, the completeness, theevaluation and the scientific working is assessed.

* Process of the Project: the process and progression of the project is assessed in regular meetings with the supervisor. For that theapproach, the project management methods, the motivation, the independent work, the time managment, the task distribution, the teamcollaboration, the communication with the supervisors, the conflict resolution, the self-reflection, the creativity, the application ofknowledge, the clarification of the task and the analytical thinking is assessed.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Milestone Presentations 25(Ergebnisprüfung) Practical Implementation 25(Ergebnisprüfung) Written Report 25(Lernprozessprüfung) Process of the Project 25

10.11.2016 10:26 Uhr Modulbeschreibung #40514/4 Seite 1 von 1

Lernergebnisse The general idea of this module is to give an introduction to approaches that uses features or processes of the human body as an input toobtain information that are otherwise difficult to access in the context of human-computer-interaction (HCI). - Basic understanding of neuronal processes and the relation of body regulation, emotion, cognition, and behavior.- Knowledge of current approaches in (evolutionary) psychology and neuroscience to emotions/affects.- Basic understanding of relevant physiological indicators of psychic processes- Expertise to assess existing and future approaches oto utilize bio/body signals in HCI and usablity research oto collect and analyze information about the user's current emotional state oto manipulate the user's mood oto identify and verify users- Ability to do critical (online) literature research- Presentation skills- Hands-on experience in an independent student research project The general idea of this module is to give an introduction to approaches that uses features or processes of the human body as an input toobtain information that are otherwise difficult to access in the context of human-computer-interaction (HCI). - Basic understanding of neuronal processes and the relation of body regulation, emotion, cognition, and behavior.- Knowledge of current approaches in (evolutionary) psychology and neuroscience to emotions/affects.- Basic understanding of relevant physiological indicators of psychic processes- Expertise to assess existing and future approaches oto utilize bio/body signals in HCI and usablity research oto collect and analyze information about the user's current emotional state oto manipulate the user's mood oto identify and verify users- Ability to do critical (online) literature research- Presentation skills- Hands-on experience in an independent student research project

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: SE Affective ComputingMandatory: completed Bachelor/Vordiplom in computer science, computer engineering, electrical engineeringDesirable: Basic signal processing skills and/or usability engineering knowledge SP Neuro-UsabilityMandatory: successful participation in the preceding seminar Affective ComputingDesirable: Basic signal processing skills and/or usability engineering knowledge

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Introduction to Physiological Computing

Modultitel:

Introduction to Physiological Computing

Leistungspunkte:

6

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hirsch, Tobias

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40517/5 Seite 1 von 2

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Seminar Affective ComputingThe cumulative grade for this module is the result form the individual performances during the courses and other academic activities.

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) PJ Neuro-Usability: project work 20(Deliverable assessment) PJ Neuro-Usability: written report+ test

20

(Deliverable assessment) SEM Affective Computing: Oralpresentation

20

(Deliverable assessment) SEM Affective Computing:handout

10

(Deliverable assessment) SEM Affective Computing: writenversion

10

(Examination) PJ Neuro-Usability: Multiple Choice-Test 10(Examination) SEM Affective Computing: Multiple Choice-Test

10

10.11.2016 10:26 Uhr Modulbeschreibung #40517/5 Seite 2 von 2

Lernergebnisse * Verständnis grundlegender Prinzipien der Akustik, Audiotechnik und auditiven Wahrnehmung.* Grundlegende Kenntnisse der Aufnahme, Kodierung, Übertragung und Wiedergabe von Sprach- und Audiosignalen.* Grundlegende Kenntnisse von Raumakustik, Elektroakustik und Psychoakustik* Grundlegende Kenntnisse zum Hören, der Hörwahrnehmung und der vom menschlichen Gehör * general understanding of basic principles of acoustics, audio technology and auditive perception* basic knowledge of recording, coding, transmission and playback of speech and audio signals* basic knowledge of room acoustics, electro acoustics and psycho acoustics* basic knowledge of hearing, hearing perception and the human auditory system

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Als Voraussetzungen werden Grundkennnisse der Signalverarbeitung und der Physik als hilfreich gesehen, allerdings sind recht geringeKenntnisse ausreichend. Zu beiden Themen wird jeweils ein einführendes Grundlagenkapitel Bestandteil des Kurses sein.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Communication acoustics

Modultitel:

Communication acoustics

Kommunikationsakustik

Leistungspunkte:

6

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hirsch, Tobias

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40526/4 Seite 1 von 1

Lernergebnisse The success of computer and communication systems strongly depends on their performance, typically reflected in the perception ofservice quality. Optimizing system performance, subject to a set of resource and cost constraints, is thus a critical design goal for systemengineers. Performance evaluation allows us to quantify the service delivered by systems as well as the usage of resources. Thus, studentscompleting this module will gain the understanding of basic concepts of performance evaluation of computer communication systems. Theywill become familiar with the basics of analytical, experimental and simulative methods, as well as approaches to experiment planning.Students will also be able to understand application of these methods to computer networks and distributed systems. Finally, they will beable to design and execute performance evaluation and comparison of systems form the performance point of view. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: BSc module „Kommunikationsnetze” or similar knowledge is required.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Performance Evaluation of Computer Communication Systems

Modultitel:

Performance Evaluation of Computer Communication Systems

Leistungsbewertung von Kommunikationsnetzen

Leistungspunkte:

6

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Döring, Michael

URL:

http://www.tkn.tu-berlin.de/?108248#kstkn

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

In total 100 Portfolio points can be obtained. The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme(Notenschlüssel) 2 of Faculty IV. The individual grades will be obtained as specified in the table below.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Project work 20(Examination) Oral consultation 65(Learning process review) Project presentation/ discussion 15

10.11.2016 10:26 Uhr Modulbeschreibung #40533/5 Seite 1 von 1

Lernergebnisse Die Studierenden sind in der Lage, eigenständig die wesentlichen Verfahren des maschinellen Lernens auf neuen Daten anzuwenden. Diesumfasst Methoden zur Klassifikation, Regression, Dimensionsreduktion und Clustering. Darüberhinaus vermittelt das Modul dastheoretische Rüstzeug (Wahrscheinlichkeitstheorie, Optimierungstheorie), um Verfahren weiterzuentwickeln und theoretisch zu analysieren. In der Wahlpflichtveranstaltung kann der Teilnehmer je nach Vorkenntnissen und Interessen folgende Schwerpunkte wählen: * Matlab Programmierung für Maschinelles Lernen und Datenanalyse oder Python Programmierung für Maschinelles Lernen: diese Kursevermitteln das praktische Rüstzeug zur Entwicklung, Anwendung und Untersuchung von Verfahren des Maschinellen Lernens. * Mathematische Grundlagen fur Maschinelles Lernen: dieser Kurs wiederholt, vertieft und spezialisiert die mathematischen Kenntnisse ausden Grundlagenmodulen des Informatikstudiums. * Seminar Maschinelles Lernen: im Seminar wird das selbststandige Einarbeiten und Prasentieren von Wissenschaftlichen Ergebnissengeübt. The students are able to independently apply methods from machine learning on new data. This includes methods for classification,regression, dimensionality reduction and clustering. Moreover, the module teaches the mathematical skills (probability theory, optimizationtheory) needed to extend and theoretical analyze machine learning methods.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Programmierkenntnisse, gute Grundlagen in Mathematik, insbesondere Lineare Algebra, Analysis, Wahr-scheinlichkeitsrechnung. Der Kurs„Mathematische Grundlagen des Maschinellen Lernens“ bietet eine kompakte Einführung bzw. Auffrischung dieser Themen. Dieses Modulist auch für Bachelorstudenten geeignet.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Maschinelles Lernen 1

Modultitel:

Maschinelles Lernen 1

Machine Learning 1

Leistungspunkte:

9

Modulverantwortlicher:

Müller, Klaus-Robert

Sekretariat:

MAR 4-1

Ansprechpartner:

keine Angabe

URL:

keine Angabe

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40550/3 Seite 1 von 1

Lernergebnisse Mit dem erfolgreichen Abschluss dieses Moduls erhalten Studenten einen Überblick über die derzeitig und zukünftig eingesetzten Dienstebzw. Dienstinfrastrukturen des mobilen Internets. Sie entwickeln anhand des Vergleichs mit statischen Netzwerken ein Verständnis für diespeziellen Charakteristika mobiler Netzwerke und lernen alles über die Vorteile und faszinierenden Möglichkeiten mobiler Dienste wiestandortbasierter Dienste und dem Ubiquitous Computing kennen. Allerdings werden sie auch auf die Probleme und Grenzen derBereitstellung mobiler Dienste aufmerksam gemacht, um diese während der Entwicklung mobiler Dienste berücksichtigen zu können.Außerdem werden ihnen verschiedene alternative Realisierungen von Diensten (z.B. geräte- und netzwerkzentrierte Architekturen) erörtertund Einblicke in Dienstplattformen, nützliche Funktionen und Betriebssysteme mobiler Endgeräte gewährt. Students who have successfully finished this module have an overview of current and future services and service infrastructures in theMobile Internet. They have developed an understanding of the special characteristics of mobile networks - compared to fixed infrastructures- and have learned about the benefits of mobile services and the fascinating prospects of emerging areas such as Location-based Servicesand Ubiquitous Computing. However, they are also aware of the problems and limits of mobile service provisioning and know how to copewith these deficiencies when designing them. Furthermore, they have good knowledge of different alternatives of realizing services (forexample, device versus network centric approaches) and an overview of related service platforms, auxiliary functions, and operatingsystems of mobile devices.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Mandatory: basic knowledge of computer science and Internet/network architecturesDesirable: knowledge of distributed systems, basic programming skills

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Mobile Services

Modultitel:

Mobile Services

Mobile Services

Leistungspunkte:

6

Modulverantwortlicher:

Küpper, Axel

Sekretariat:

TEL 19

Ansprechpartner:

Rodriguez Garzon, Sandro

URL:

http://www.snet.tu-berlin.de/moses

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40576/2 Seite 1 von 1

Lernergebnisse - To understand the technology evolution to multicore architectures.To become familiar with different types of multicore architectures such as cache coherent, shared memory architectures, distributedmessage-passing architectures, and Graphics Processing Units (GPUs).To understand how different multicore architectures are programmed.To be able to select the most suitable multicore architecture for an application domain.To be able to read and understand the principles of shared memory parallel programming.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: An introductory course on computer architecture (e.g. TechGI 2 or Rechnerorganisation), good programming skills, preferably in C/C++.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Multicore Systems

Modultitel:

Multicore Systems

Mehrkernsysteme

Leistungspunkte:

6

Modulverantwortlicher:

Juurlink, Bernardus

Sekretariat:

EN 12

Ansprechpartner:

Juurlink, Bernardus

URL:

http://www.aes.tu-berlin.de

Modulsprache:

Deutsch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Grading system 2 will be used:

95% or more1.090% or more1.385% or more1.780% or more2.075% or more2.370% or more2.765% or more3.060% or more3.355% or more3.750% or more4.0Less than 50%5.0

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) 5 assignments (weighted 15, 12,10, 8 and 5 points)

50

(Examination) Final Test 50

10.11.2016 10:26 Uhr Modulbeschreibung #40585/3 Seite 1 von 1

Lernergebnisse Most modern computer systems are inherently distributed and networked: from multi-core computer architectures over wireless sensorsystems and datacenters to peer-to-peer systems. Accordingly, network algorithms are needed to design and operatethese computer systems in a scalable and robust way. The goal of this lecture is to provide the students with tools and techniques to reason about efficient network algorithms. The lecture isproblem-oriented and structured into different fundamental princi-ples, such as Randomization,Decentralization, Indirection, etc. Each lecture will cover a different basic problem (such as Load Balancing, Medium Access, SymmetryBreaking, etc.) and will be self-contained. By the end of the lecture, the student will be able to develop her/his own network algorithms, and formally prove correctness as well ascomplexity guarantees (e.g., on the computational or message complexity). The students will also have a good understanding of when to apply which principle, i.e., where randomization can be useful and where not,or to which extent a distributed system should be decentralized. The students will also have a good idea of the different natures of today's networks. If time permits, we will also extend our discussionbeyond computer networks and have an algorithmic look at social networks. This module is principally designed to impart:technical skills: 40x, method skills: 40x, system skills 10x, social skills 10x no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Desirable - knowledge and qualifications equivalent to: * BINF-GL - MPGI1 Algorithmische und funktionale Lösung diskreter Probleme* BINF-GL - MPGI2 Algorithmen und Datenstrukturen im imperativen Stil* Network Protocols and Architectures* English language

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Algorithms

Modultitel:

Network Algorithms

Netzwerkalgorithmen

Leistungspunkte:

6

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40589/1 Seite 1 von 1

Lernergebnisse The students know the basic principles, algorithms and architectures of computer networks. They are able to understand complexcorrelations and to interpret results of simulations. The goal is to master the basics of communications in computer networks, who hopefullyhave a long half-life period. This means that the discussed principles outlast current mainstreams. This course is principally designed to impart:Technical skills 50x, method skills 10x, system skills 30x , social skills 10x no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of the compulsory modules of Bachelor studies is mandatory.Desirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Network Architectures - Basics

Modultitel:

Network Architectures - Basics

Netzwerkarchitekturen - Grundlagen

Leistungspunkte:

6

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

1.) Hausaufgaben Network Protocols and Architectures

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40591/2 Seite 1 von 1

Lernergebnisse After successful completion of the project the students are capable of solving small tasks on their own. This includes background research,documentation and management of the project. Ths module imparts 10–20% professional competence, 30% methodological competence, 25–35% system competence, 25% socialcompetence. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of the compulsory modules of Bachelor studies and the Master module “Network architectures – basics” is mandatory.Desirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Architectures - Master Project

Modultitel:

Network Architectures - Master Project

Netzwerkarchitekturen - Master Projekt

Leistungspunkte:

12

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Overall, there are 100 (points) Portfoliopunkte:- practical part including the thesis (70 points)- presentation (30 points)

The grade will be determined based on the grading scheme 2 from department IV.

Prüfungselement Kategorie Gewicht Dauer

Practical part including thesis 70Presentation 30

10.11.2016 10:26 Uhr Modulbeschreibung #40593/3 Seite 1 von 1

Lernergebnisse This lab course (Praktikum) trains in the configuration of networking components like switches and routers. After a successful completionthe students are capable of configuring routing protocols and policies, setting up VLANs and basic IPv4 / IPv6 networks as well astroubleshooting basic problems arising in that context.Likewise experiment planning, setup and performance are taught. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Good knowledge of the Master module “Network architectures – basics” (or equivalent) and the ability towork with the Linux command line as well as scripting languages is required. Fulfillment of therequirements has to be proven prior to admissionDesirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Netzwerkarchitekturen - RouterLab

Modultitel:

Netzwerkarchitekturen - RouterLab

Network Architectures - RouterLab

Leistungspunkte:

9

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Foucard, Damien Jean MarieDaniel

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Successful participation in the lab course (Praktikum) requires continuous attendance and activeparticipation, accepted solutions of the work sheets.The grade will be determined by the weighted average grades of all solutions (Portfolioprüfung). Students need a minimum totalpercentage, to pass the lab course.

Grading based on Fakultät 4 Notenschlüssel 2.

The oral test will take place after the first two (ungraded) lab assignments, and will be based on their content. Ongoing worksheets will behanded in weekly and discussed in review meetings, which are part of the examination elements.

Prüfungselement Kategorie Gewicht Dauer

8 lab assignments with review meetings, 11 points each 88Oral test 12

10.11.2016 10:26 Uhr Modulbeschreibung #40595/3 Seite 1 von 1

Lernergebnisse The successful completion of the seminar enables the participants to understand recent, complex, and professional literature and tosummarize the work. Furthermore, every participant acquires profound knowledge in his/her small topic. This course is principally designed to impart:technical skills 20x method skills 35x, system skills 10x, social skills 35x. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Mandatory is the compulsory module "TechGI4 Rechnernetze und Verteilte Systeme", Desirable: good English language skills, the module"Network Architectures - Basics"

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Architectures - Seminar

Modultitel:

Network Architectures - Seminar

Netzwerkarchitekturen - Seminar

Leistungspunkte:

3

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Overall, there are 100 (points) Portfoliopunkte:- seminar paper (50 points)- presentation (50 points)

The grade will be determined based on the grading scheme 2 from department IV.

Prüfungselement Kategorie Gewicht Dauer

Presentation 50Seminar paper 50

10.11.2016 10:26 Uhr Modulbeschreibung #40596/2 Seite 1 von 1

Lernergebnisse The goal is to understand the theoretical background and technical details of the respective lecture (routing, security, measurement) as wellas the basics of the whole range of topics. Illustrative examples deepen the comprehension such that a practical implementation of the topicat hand is obvious. These lectures are the basis on which projects and theses can be built upon. Furthermore, every participant acquiresprofound knowledge in his confined topic. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Good knowledge of the compulsory modules of Bachelor studies and the Master module "Network architectures - basics" is mandatory.Desirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Architectures Specialization (big)

Modultitel:

Network Architectures Specialization (big)

Netzwerkarchitekturen Spezialisierung (groß)

Leistungspunkte:

9

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Foucard, Damien Jean MarieDaniel

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40597/4 Seite 1 von 1

Lernergebnisse The goal is to understand the theoretical background and technical details of the respective lecture (routing, security, measurement) as wellas the basics of the whole range of topics. Illustrative examples deepen the comprehension such that a practical implementation of the topicat hand is obvious. These lectures are the basis on which projects and theses can be built upon. Furthermore, every participant acquiresprofound knowledge in his confined topic. This module is principally designed to impart:technical skills 50x , method skills 10x , system skills 30x , social skills 10x no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Good knowledge of the compulsory modules of Bachelor studies and the Master module "Network architectures - basics" is mandatory.Desirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Architectures Specialization (small)

Modultitel:

Network Architectures Specialization (small)

Netzwerkarchitekturen Spezialisierung (klein)

Leistungspunkte:

6

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40598/3 Seite 1 von 1

Lernergebnisse After completion of this module, the students have gained profound hands-on experience working with IEEE 802.11-based wireless accesspoints, OpenWrt and essential network measurement, debugging and analyzing tools. Essentially, they will acquire the basics in the field ofIEEE 802.11-based network management and configuration including authentication, association, encryption schemes and capabilitymanagement. Moreover, they will measure and evaluate the impact of wireless interference, rate and power control on the transport layerperformance. They will build up technical expertise on IEEE 802.11 behavior in wireless networking environments through variousexperiment setups and performance evaluations. This course is principally designed to impart:technical skills 30x, method skills 30x, system skills 30x, social skills 10x no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Good knowledge of the Master module "Network architectures - basics" (or equivalent) and the ability to work with the Linux command lineas well as scripting languages is required. Fulfillment of the requirements has to be proven prior to admission.Desirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Architectures - WirelessLab

Modultitel:

Network Architectures - WirelessLab

Network Architectures - WirelessLab

Leistungspunkte:

9

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Overall, there are 100 (points) Portfoliopunkte:

- 1x Oral debriefing of the tools of the trade (12 pts)- 8x Written protocol + short debriefing (11 pts each)

The grade will be determined based on the grading scheme 2 from department IV.

Prüfungselement Kategorie Gewicht Dauer

8x Written protocol + short debriefing (11 pts each) 88Oral debriefing 12

10.11.2016 10:26 Uhr Modulbeschreibung #40599/3 Seite 1 von 1

Lernergebnisse Students completing this module have gained understanding of the basic principles and technologies behind networked embeddedsystems. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: The course assumes founded knowledge in networking (e.g., BSc module Kommunikationsnetze), operating systems (e.g. Linux, TinyOS)and embedded programming (e.g. C, C++).

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Networked Embedded Systems

Modultitel:

Networked Embedded Systems

Vernetzte eingebettete Systeme

Leistungspunkte:

6

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Handziski, Vlado

URL:

http://www.tkn.tu-berlin.de/?108248#nes

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

In total 100 Portfolio points can be obtained. The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme(Notenschlüssel) 1 of Faculty IV. The individual grades will be obtained as specified in the table below.

Further details:

IV: In-class presentation: Each student is asked to prepare one ~30 min in-class presentation on a selected NES technology. The rawmaterials for the preparation of the in-class presentations are made available to the students. Evaluated are presentation aspects like:quality of the content and the coverage, presentation organization and style, capability to answer follow-up questions as part of the in-classdiscussion (see "advocate" role below).

IV: "Advocate" role and in-class discussions: After each presentation there is a short in-class discussion under the guidance of a studentthat is named as "advocate" for this particular talk. Attendance and active participation in the discussion (with comments, questions, etc.) isexpected from all students. Like the main presenter, the "advocate" has to familiarize himself with the raw materials for the presentationand should be capable of asking critical follow-up questions and to guide the in-class discussion with the help of the docent.

IV: In-class quiz: After the completion of a cluster of in-class presentations in a given topical area, the students take part in a short ~15 minwritten quiz that checks the level of acquired knowledge from the in-class presentations and the follow-up discussions

IV: Final written test: After the completion of all in-class presentations, the students take part in a ~45 min final test that checks the overalllevel of acquired knowledge from the in-class presentations and the follow-up discussions.

IV: Project assignment: Organized in small teams (3-4 persons), the students are asked to design, develop and demonstrate a relativelysimple but complete NES application that involves data acquisition, processing and communication, thus gaining hands-on experience inworking with state-of-the-art NES hardware and software. Evaluated are: two "project milestone presentations" (intermediate and finalpresentation) using the same criteria as for the "in-class presentations", a "project demo" (general functionality, achievement of designgoals, effective use of HW and SW) and a "final project review" (team work, code quality, documentation, effective use of version controltools). Students are also asked to self-evaluate the relative contribution of each team member as part of the team, which is considered inthe formation of the final individual marks for the project assignment.

Prüfungselement Kategorie Gewicht Dauer

IV "Advocate" role, attendance and in-class discussions(Learning process review)

4

IV 2 In-class quizzes, 5 points each (Examination) 10IV 2 Project milestone presentations, 6 points each(Deliverable assessment)

12

IV Final project review (Deliverable assessment) 10IV Final written test (Examination) 36IV In-class presentation assignment (Deliverableassessment)

20

IV Project demo (Deliverable assessment) 8

10.11.2016 10:26 Uhr Modulbeschreibung #40600/5 Seite 1 von 1

Lernergebnisse The main objective of this module is to improve the technical knowledge in the area of communication networks, and in particular, studentswill gain a deeper understanding of specific technologies and their characteristics (basic functionality, adjustments to user requirements,etc.). Students will have the opportunity to broaden their knowledge of specific communication technologies (UMTS/LTE, Internet,multimedia, ad-hoc, sensor networks, etc.). This course will also provide a possibility to improve the knowledge of the overlapping areas ofmany different communication technologies that will be discussed from different perspectives (wireless communication, high-speednetworks). Additionally, during the seminars students will have the opportunity to elaborate on the chosen technology or technology-orientedproblem and discuss it in front of a bigger audience. This will help to develop practical presentation skills as well as critical thinking. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: BSc Module „Kommunikationsnetze“ or similar knowledge.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Technologies (Medium)

Modultitel:

Network Technologies (Medium)

Netzwerktechnologien (Mittel)

Leistungspunkte:

9

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Wolisz, Adam

URL:

http://www.tkn.tu-berlin.de/?108248#ktechm

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

In total 100 Portfolio points can be obtained:* Seminar (34 Portfolio points),* Two lectures out of: VL Modern Wireless Networks, VL High-speed Network Technologies and VL Ad-hoc- and Sensor Networks (eachlecture 33 Portfolio points).

The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.

Prüfungselement Kategorie Gewicht Dauer

SE Network Technologies - attendance and discussion(Learning process review)

5

SE Network Technologies - presentation (Examination) 10SE Network Technologies - written report anddocumentation (Deliverable assessment)

19

VL Ad-hoc and Sensor Networks - final lecture written test(Examination)

33

VL High-speed Network Technologies - oral consultation(Examination)

33

VL Modern Wireless Networks - written test (Examination) 33

10.11.2016 10:26 Uhr Modulbeschreibung #40603/5 Seite 1 von 1

Lernergebnisse The main objective of this module is to improve the technical knowledge in the area of communication networks, and in particular, studentswill gain a deeper understanding of specific technologies and their characteristics (basic functionality, adjustments to user requirements,etc.). Students will have the opportunity to broaden their knowledge of specific communication technologies (UMTS/LTE, Internet,multimedia, ad-hoc, sensor networks, etc.). This course will also provide a possibility to improve the knowledge of the overlapping areas ofmany different communication technologies that will be discussed from different perspectives (wireless communication, high-speednetworks). Additionally, during the seminars students will have the opportunity to elaborate on the chosen technology or technology-orientedproblem and discuss it in front of a bigger audience. This will help to develop practical presentation skills as well as critical thinking. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: BSc Module „Kommunikationsnetze“ or similar knowledge is required.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Technologies (Small)

Modultitel:

Network Technologies (Small)

Netzwerktechnologien (Klein)

Leistungspunkte:

6

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Wolisz, Adam

URL:

http://www.tkn.tu-berlin.de/?108248#ktechs

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

In total 100 Portfolio points can be obtained:* Seminar (50 Portfolio points),* One lecture out of: VL Modern Wireless Networks, VL High-speed Network Technologies and VL Ad-hoc- and Sensor Networks (eachlecture 50 Portfolio points).

The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme (Notenschlüssel) 2 of Faculty IV.

Prüfungselement Kategorie Gewicht Dauer

SE Network Technologies - attendance and discussion(Learning process review)

7

VL High-speed Network Technologies - oral consultation(Examination)

50

SE Network Technologies - presentation (Examination) 15SE Network Technologies - written report anddocumentation (Deliverable assessment)

28

VL Ad-hoc and Sensor Networks - final lecture written test(Examination)

50

VL Modern Wireless Networks - written test (Examination) 50

10.11.2016 10:26 Uhr Modulbeschreibung #40604/5 Seite 1 von 1

Lernergebnisse After successful completion of the project the students are capable of solving small tasks on their own. This includes background research,documentation and management of the project. Ths module imparts 10–20% professional competence, 20% methodological competence, 40–50% system competence, 20% socialcompetence. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of the compulsory modules of Bachelor studies and the Master module “Network architectures – basics” is mandatory.Desirable: good English language skills.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Network Architectures - Master Project (small)

Modultitel:

Network Architectures - Master Project (small)

Netzwerkarchitekturen - Master-Projekt (klein)

Leistungspunkte:

6

Modulverantwortlicher:

Feldmann, Anja

Sekretariat:

MAR 4-4

Ansprechpartner:

Ludwig, Arne

URL:

http://www.inet.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Overall, there are 100 (points) Portfoliopunkte:

- practical part including the thesis (70 points)- presentation (30 points)

The grade will be determined based on the grading scheme 2 from department IV.

10.11.2016 10:26 Uhr Modulbeschreibung #40606/2 Seite 1 von 1

Lernergebnisse Graduates of this module are endued with competences in the following areas: services, protocols, and elements of infrastructures withinclassical wired and mobile circuit-switched telecommunication networks, IP based Next Generation Networks (NGNs). Furthermore, theylearn to use this knowledge in practice and have the ability to accomplish development tasks in small groups, to document the procedures,and to present the results. They can independently perform the necessary literature research and develop own concepts. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of technologies in the area of wired and wireless communication networks is required (e.g. "Telekommunikationsnetze", "NextGeneration Network Technologies & Services (NGN)").

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Next Generation Networks and Future Internet Technologies - Project 1

Modultitel:

Next Generation Networks and Future Internet Technologies - Project 1

Next Generation Networks and Future Internet Technologies - Projekt 1

Leistungspunkte:

9

Modulverantwortlicher:

Magedanz, Thomas

Sekretariat:

MAR 5-5

Ansprechpartner:

Willner, Alexander

URL:

http://av.tu-berlin.de/teaching

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The project consists of four parts and in total you can acquire 100 points (Portfoliopunkte).The final grade of the module is determined completely by the result of the project, based onthe School IV grading system 2 (§ 47 (2) AllgStuPO).

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assesment) evaluation 20(Deliverable assesment) implementation 30(Deliverable assesment) presentation 30(Deliverable assesment) written report 20

10.11.2016 10:26 Uhr Modulbeschreibung #40611/7 Seite 1 von 1

Lernergebnisse Graduates of this module are endued with competences in the following areas: services, protocols, and elements of infrastructures withinclassical wired and mobile circuit-switched telecommunication networks, IP based Next Generation Networks (NGNs). Furthermore, theylearn to use this knowledge in practice and have the ability to accomplish development tasks in small groups, to document the procedures,and to present the results. They can independently perform the necessary literature research and develop own concepts. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of technologies in the area of wired and wireless communication networks is required (e.g. "Telekommunikationsnetze", "NextGeneration Network Technologies & Services (NGN)").

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Next Generation Networks and Future Internet Technologies - Project 2

Modultitel:

Next Generation Networks and Future Internet Technologies - Project 2

Next Generation Networks and Future Internet Technologies - Projekt 2

Leistungspunkte:

9

Modulverantwortlicher:

Magedanz, Thomas

Sekretariat:

MAR 5-5

Ansprechpartner:

Willner, Alexander

URL:

http://av.tu-berlin.de/teaching

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The project consists of four parts and in total you can acquire 100 points (Portfoliopunkte).The final grade of the module is determined completely by the result of the project, based onthe School IV grading system 2 (§ 47 (2) AllgStuPO).

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) evaluation 20(Deliverable assessment) implementation 30(Deliverable assessment) presentation 30(Deliverable assessment) written report 20

10.11.2016 10:26 Uhr Modulbeschreibung #40612/6 Seite 1 von 1

Lernergebnisse Graduates of this module are endued with competences in the following areas: services, protocols, and elements of infrastructures withinclassical wired and mobile circuit-switched telecommunication networks, IP based Next Generation Networks (NGNs) and they will be ableto identify prospective challenges of the Internet (Future Internet). no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge of technologies in the area of wired and wireless communication networks is required (e.g. “Telekommunikationsnetze”).

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Next Generation Networks - Basis 1

Modultitel:

Next Generation Networks - Basis 1

Next Generation Networks - Basis 1

Leistungspunkte:

9

Modulverantwortlicher:

Magedanz, Thomas

Sekretariat:

MAR 5-5

Ansprechpartner:

Willner, Alexander

URL:

http://av.tu-berlin.de/teaching

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The module consists of two course achievements and in total you can acquire 100 points (Portfoliopunkte): - The NGN lecture will be examined by a written test (80 min, 65 points each). - The FIT lecture will be examined by a written test (80 min, 35 points). - The seminar consists of two parts and in total you can acquire 35 points (Portfoliopunkte): a presentation and a written report - bothaccount for 17,5 points.The final grade of the module is determined based on the School IV grading system 2 (§ 47 (2) AllgStuPO).

10.11.2016 10:26 Uhr Modulbeschreibung #40613/6 Seite 1 von 1

Lernergebnisse Students who have successfully finished this module have an advanced knowledge of operating systems. They are aware of differentarchitectural approaches and know their advantages and disadvantages. They have acquired the ability for well-founded design decisionsbased on qualitative and quantitative arguments. They have a sound knowledge of modern approaches like microkernels, virtual machines,and distributed operating systems. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic bachelor knowledge on operating systems and computer architecture is required.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Operating System Design

Modultitel:

Operating System Design

Betriebssystemkonzepte

Leistungspunkte:

6

Modulverantwortlicher:

Heiß, Hans-Ulrich

Sekretariat:

EN 6

Ansprechpartner:

keine Angabe

URL:

http://www.kbs.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) [KBS] Operating System Design Assignments

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40619/3 Seite 1 von 1

Lernergebnisse Ability to solve a specific development problem in the area of operating systems as a team. Competence in design of concurrent software,teamwork, project management, documentation, presentation. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Sound knowledge of operating systems, embedded operating systems, or security aspects (depending on the actual topics of the seminar).Additionally a good programming experience is needed (depending on the project, most likely C, C++, C#, or Java).

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Operating System Project & Seminar

Modultitel:

Operating System Project & Seminar

Betriebssystem-Projekt und -Seminar

Leistungspunkte:

9

Modulverantwortlicher:

Heiß, Hans-Ulrich

Sekretariat:

EN 6

Ansprechpartner:

keine Angabe

URL:

http://www.kbs.tu-berlin.de/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Insgesamt können 100 Portfoliopunkte erreicht werden:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

After successful completion a seminar and project certificate will be issued which meet the master's program's requirements.

Prüfungselement Kategorie Gewicht Dauer

Project Implementation 30Project final presentation 20Project final report 20Seminar paper 15Seminar presentation 15

10.11.2016 10:26 Uhr Modulbeschreibung #40620/2 Seite 1 von 1

Lernergebnisse Students who have successfully finished this module have a good knowledge of different parallel architectures. They are capable to designand analyze parallel algorithms for different target architectures. They know how to implement them on different parallel architectures withstate-of-the-art tools. They also know, how to manage parallel computers for multiprogramming and how to solve the partitioning, mapping,load balancing and scheduling problems. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Bachelor in Computer Science or related; basic knowledge in computer architecture, operating systems, algorithms and data structures; Cprogramming.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Parallel Systems

Modultitel:

Parallel Systems

Parallele Systeme

Leistungspunkte:

6

Modulverantwortlicher:

Heiß, Hans-Ulrich

Sekretariat:

EN 6

Ansprechpartner:

keine Angabe

URL:

http://www.kbs.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) [KBS] Parallel Programming Assignments

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40626/3 Seite 1 von 1

Lernergebnisse On successful completion, students will be able to: - apply the approach of parameterized complexity analysis to solve computationally hard (NP-hard) problems- design and analyze parameterized algorithms- identify practically relevant and tractable special cases of problems that are computationally hard in general- use complexity-theoretic methods to determine the limits of parameterized algorithmics On successful completion, students will be able to: - apply the approach of parameterized complexity analysis to solve computationally hard (NP-hard) problems- design and analyze parameterized algorithms- identify practically relevant and tractable special cases of problems that are computationally hard in general- use complexity-theoretic methods to determine the limits of parameterized algorithmics

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic knowledge on algorithms

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Parameterized Algorithmics

Modultitel:

Parameterized Algorithmics

Parametrisierte Algorithmik

Leistungspunkte:

6

Modulverantwortlicher:

Niedermeier, Rolf

Sekretariat:

TEL 5-1

Ansprechpartner:

Thielcke, Christlinde

URL:

http://www.akt.tu-berlin.de/menue/teaching

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40627/4 Seite 1 von 1

Lernergebnisse The course deals with mathematic-physical modelling of a sensor by using the photographic camera as example. The modelling iscompletely expressed by algebraic projective geometry. Not only studying object reconstruction using image data of a multifaceted sensor,but and first of all the complete modelling of technically relevant issues in a homogeneous mathematical framework is important in thiscourse. This framework is also used for 3D-computer graphics. Interdisciplinary application of the contents are demonstrated using variousillustrative examples from e.g. manufacturing industries to geography, medicine and social sciences. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: none

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Photogrammetric Computer Vision

Modultitel:

Photogrammetric Computer Vision

Photogrammetric Computer Vision

Leistungspunkte:

9

Modulverantwortlicher:

Hellwich, Olaf

Sekretariat:

MAR 6-5

Ansprechpartner:

Dennert, Marion

URL:

http://www.cv.tu-berlin.de/

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) Homework Photogrammetric Computer Vision

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40628/4 Seite 1 von 1

Lernergebnisse Students gain practical experience in dealing with modern communication systems, their design, evaluation and implementation. The focusis put primarily on modern systems of wireless mobile communications, as well as Internet protocols and applications. Skills obtained in thismodule will enable students to design, implement and evaluate modern communication systems. Thanks to working in small teams,graduates also develop project management and team working skills. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: The contents of the BSc module „Kommunikationsnetze” or at least "Rechnernetze und Verteilte Systeme ("Computer Networks andDistributed Systems") is essential. Students should consider choosing only projects for which the required expertise of software and/ordevelopment tools had been previously acquired. The individual requirements are dependent on the project and can be found in the detailed project description at the following website:http://www.tkn.tu-berlin.de/menue/tknteaching/studentenprojekte/parameter/en/

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Project in advanced network technologies

Modultitel:

Project in advanced network technologies

Projekt in erweiterten Netzwerktechnologien

Leistungspunkte:

6

Modulverantwortlicher:

Wolisz, Adam

Sekretariat:

FT 5

Ansprechpartner:

Döring, Michael

URL:

http://www.tkn.tu-berlin.de/menue/tknteaching/studentenprojekte/parameter/en/

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

In total 100 Portfolio points can be obtained. The final module grade will be given according to the §47 (2) AllgStuPO, using grade scheme(Notenschlüssel) 2 of Faculty IV. The individual grades will be obtained as specified in the table below.

The mark will take into account creativity, project management, presentations, as well as the actual implementation and evaluation of theproposed solution. The project needs to be documented with a final report and a survey page in the Internet.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Final report 20(Deliverable assessment) Survey page 10(Learning process review) 3 Milestone presentations (10points each)

30

(Learning process review) Self organization of work &solution quality

40

10.11.2016 10:26 Uhr Modulbeschreibung #40644/5 Seite 1 von 1

Lernergebnisse Die Studierenden sind in der Lage, eine komplexere Fragestellung aus dem Forschungsgebiet der Statistischen Methoden in KI undMachinellem Lernen selbstständig zu bearbeiten und die Resultate anschließend adäquat zu präsentieren.Die Fähigkeiten umfassen: Literaturarbeit, Präzisierung der vorgegebenen Fragestellung, Planung, Durchführung und Bewertung derwissenschaftlichen Arbeit, adäquate Präsentation und Diskussion der erzielten Resultate. Students are able to work on complex questions in the field of statistical methods in ai and ml and present the results properly.The abilities involve: working with literature, precision of specified questions, planning, execution and evaluation of scientific work,presentation and discussion of obtains results.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Eine vorherige Teilnahme an der Vorlesung Probabilistic and Bayesian Modelling in Machine Learning and Artificial Intelligence oderäquivalente Kenntnisse werden vorausgesetzt. Für die Bearbeitung der Projekte sind außerdem Grundkenntnisse in Mathematik (LineareAlgebra, Analysis, Stochastik) sowie Programmierkenntnisse erforderlich.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Projekt: Statistische Methoden in KI und ML

Modultitel:

Projekt: Statistische Methoden in KI und ML

Project: Statistical Methods in AI and ML

Leistungspunkte:

9

Modulverantwortlicher:

Opper, Manfred

Sekretariat:

MAR 4-2

Ansprechpartner:

Ruttor, Andreas

URL:

http://www.ki.tu-berlin.de/menue/lehre

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Projektbericht 60(Ergebnisprüfung) Seminarvortrag 40

10.11.2016 10:26 Uhr Modulbeschreibung #40657/3 Seite 1 von 1

Lernergebnisse Graduates of this module are able to master methods and techniques with which the quality of embedded systems can be systematicallyensured. They have knowledge about existing techniques and know how to apply them. Furthermore, they are also able to incorporate newtechniques using advanced reading material (e.g., conference proceedings), and to present their main characteristics and how they work. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge from bachelor modules in Computer Science/Technical Computer Science or the like. Recommended are basic skills in softwareengineering for embedded systems.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Quality Assurance of Embedded Systems

Modultitel:

Quality Assurance of Embedded Systems

Quality Assurance of Embedded Systems

Leistungspunkte:

6

Modulverantwortlicher:

Glesner, Sabine

Sekretariat:

TEL 12-4

Ansprechpartner:

Herber, Paula

URL:

keine Angabe

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) [PES] 2 bestandene Tests

Prüfungsform: Benotet: Dauer:

mündlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40662/3 Seite 1 von 1

Lernergebnisse - After completion participants will have acquired the necessary knowledge and skills to read, discuss, understand, present, and summarizeoriginal research in the field of computer architecture and follow original research talks. They are able to provide feedback on each other’swork and to formulate research questions. They are further able to write a review paper about recent developments in computerarchitecture.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Module Advanced Computer Architecture or a similar course

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Recent Advances in Computer Architecture

Modultitel:

Recent Advances in Computer Architecture

Aktuelle Fortschritte im Bereich Rechnerarchitekturen

Leistungspunkte:

3

Modulverantwortlicher:

Juurlink, Bernardus

Sekretariat:

EN 12

Ansprechpartner:

Juurlink, Bernardus

URL:

http://www.aes.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Grading system 2 will be used:

95% or more1.090% or more1.385% or more1.780% or more2.075% or more2.370% or more2.765% or more3.060% or more3.355% or more3.750% or more4.0Less than 50%5.0

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Presentation 50(Deliverable assessment) Written review 50

10.11.2016 10:26 Uhr Modulbeschreibung #40668/2 Seite 1 von 1

Lernergebnisse Graduates of this module are able to understand current research papers in the field of embedded systems, software engineering,verification and/or testing and to present their results. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge from bachelor modules in Computer Science/Technical Computer Science/Software Engineering or the like.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Seminar Software Engineering of Embedded Systems

Modultitel:

Seminar Software Engineering of Embedded Systems

Seminar Software Engineering of Embedded Systems

Leistungspunkte:

3

Modulverantwortlicher:

Glesner, Sabine

Sekretariat:

TEL 12-4

Ansprechpartner:

Jähnig, Nils Erik

URL:

keine Angabe

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The students have to prepare a written report of 6-10 pages and a presentation. They also have to write reviews of reports of otherstudents. Students also have to contribute to the Question & Answer session of the talks of other participants.

According to § 47 (2) AllgStuPO the final mark is calculated using the grading key 2 of school IV.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Presentation 45(Deliverable assessment) Report 45(Deliverable assessment) Reviews 10

10.11.2016 10:26 Uhr Modulbeschreibung #40698/4 Seite 1 von 1

Lernergebnisse This is a Master Degree module on special topics in the area of Communications Network Security and Autonomous Security. Aftercompletion of this module students will have deep understanding of:-state of the art security problems and solutions for communications networks,-security needs of future systems, communications networks and Internet The seminar will enable students to analyse and understand security needs of future communications networks. Students will be able tofollow state of the art research results published in high rank conferances and journals. Module will cover the topics which are not only inthe interest of research institutes and academies but also industries. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic understanding in:•Computer Communications Networks and Operating Systems•Network Security and Cryptography•Algorithms

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Special Topics in Communications Networks and Autonomous Security

Modultitel:

Special Topics in Communications Networks and Autonomous Security

Special Topics in Communications Networks and Autonomous Security

Leistungspunkte:

3

Modulverantwortlicher:

Albayrak, Sahin

Sekretariat:

TEL 14

Ansprechpartner:

Bsufka, Karsten

URL:

http://www.aot.tu-berlin.de/index.php?id=2662

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Presentation: Content 30(Ergebnisprüfung) Presentation: Talk 10(Ergebnisprüfung) Presention: Slides 10(Ergebnisprüfung) Seminar text 50

10.11.2016 10:26 Uhr Modulbeschreibung #40718/3 Seite 1 von 1

Lernergebnisse - The students gain:- Understanding of the most important principels of acoustical human-computer interaction.- Basic knowledge of the production, transmission and perception of speech signals.- Basic knowledge of the transmission and coding of speech and audio signals- Basic knowledge of speech-technological systems (speech recognition, speech synthesis, spoken dialogue systems)- Practical experience in the design of acoustical human-computer interfaces.- Presentation and knowledge transfer skills

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Mandatory: NoneDesirable: Basic knowledge of signal processing.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Speech Signal Processing and Speech Technology

Modultitel:

Speech Signal Processing and Speech Technology

Sprachsignalverarbeitung und Sprachtechnologie

Leistungspunkte:

6

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hinterleitner, Florian

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung (100 Punkte insgesamt) benotet

Notenschlüssel:

Note: 1.0 1.3 1.7 2.0 2.3 2.7 3.0 3.3 3.7 4.0Punkte: 95.0 90.0 85.0 80.0 75.0 70.0 65.0 60.0 55.0 50.0

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Hausaufgabe 1 schriftlich 10 lauffähiger Quellcode(Ergebnisprüfung) Hausaufgabe 2 schriftlich 10 lauffähiger Quellcode(Lernprozessevaluation) Demonstration einesSprachdialogsystems

mündlich 10 20 Minuten

(Punktuelle Leistungsabfrage) Schriftlicher Test 1 schriftlich 35 40 Minuten(Punktuelle Leistungsabfrage) Schriftlicher Test 2 schriftlich 35 40 Minuten

10.11.2016 10:26 Uhr Modulbeschreibung #40721/5 Seite 1 von 1

Lernergebnisse Students gain- Knowledge in working on specific State-of-the-Art topics in the field of Usability.- Measurement of quality and usability of interactive Systems.- Practical experience in technical realization of human-machine interfaces.- Knowledge of the design and implementation cycle of interactive systems.- Practical proving of the knowledge in quality and usability judgement on selected technical systems.- Presentation of project work. Students gain- Knowledge in working on specific State-of-the-Art topics in the field of Usability.- Measurement of quality and usability of interactive Systems.- Practical experience in technical realization of human-machine interfaces.- Knowledge of the design and implementation cycle of interactive systems.- Practical proving of the knowledge in quality and usability judgement on selected technical systems.- Presentation of project work.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic knowledge in information and communication technologies is recommended.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Study Project Quality & Usability (6CP)

Modultitel:

Study Project Quality & Usability (6CP)

Studienprojekt Quality & Usability (6LP)

Leistungspunkte:

6

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hirsch, Tobias

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Presentation 20(Deliverable assessment) Project Results 80

10.11.2016 10:26 Uhr Modulbeschreibung #40725/5 Seite 1 von 1

Lernergebnisse Students gain- Knowledge in working on specific State-of-the-Art topics in the field of Usability.- Measurement of quality and usability of interactive Systems.- Practical experience in technical realization of human-machine interfaces.- Knowledge of the design and implementation cycle of interactive systems.- Practical proving of the knowledge in quality and usability judgement on selected technical systems.- Presentation of project work. Students gain- Knowledge in working on specific State-of-the-Art topics in the field of Usability.- Measurement of quality and usability of interactive Systems.- Practical experience in technical realization of human-machine interfaces.- Knowledge of the design and implementation cycle of interactive systems.- Practical proving of the knowledge in quality and usability judgement on selected technical systems.- Presentation of project work.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic knowledge in information and communication technologies is recommended.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Study Project Quality & Usability (9CP)

Modultitel:

Study Project Quality & Usability (9CP)

Studienprojekt Quality & Usability (9LP)

Leistungspunkte:

9

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

TEL 18

Ansprechpartner:

Hirsch, Tobias

URL:

http://www.qu.tu-berlin.de/menue/studium_und_lehre/modulkatalog/

Modulsprache:

Deutsch/Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Die Gesamtnote gemäß § 47 (2) AllgStuPO wird nach dem Notenschlüssel 2 der Fakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Deliverable assessment) Presentation 20(Deliverable assessment) Project Results 80

10.11.2016 10:26 Uhr Modulbeschreibung #40726/5 Seite 1 von 1

Lernergebnisse Students gain hands-on experience with all aspects of project work (including team-based software development, project management,collaborative decision making, documenting and communicating project results) in the area of cloud systems. They are able to solve real-world problems in the context of the design and evaluation of cloud-based enterprise systems. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Knowledge on programming with Java, distributed systems and middleware concepts. Prior experience with LaTeX. Willingness to workwith new technologies, architectural paradigms, and programming models.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Cloud Prototyping

Modultitel:

Cloud Prototyping

Cloud Prototyping

Leistungspunkte:

12

Modulverantwortlicher:

Tai, Stefan

Sekretariat:

EN 14

Ansprechpartner:

Tai, Stefan

URL:

http://www.ise.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

Insgesamt können 100 Portfoliopunkte erreicht werden. Die Gesamtnote gemäß §47 (2) AllgStuPO wird nach dem Notenschlüssel 2 derFakultät IV ermittelt.

Prüfungselement Kategorie Gewicht Dauer

(Ergebnisprüfung) Dokumentation 20(Ergebnisprüfung) Entwickelte Softwareartefakte 30(Ergebnisprüfung) Ergebnispräsentation 20(Ergebnisprüfung) Mündliche Rücksprache 30

10.11.2016 10:26 Uhr Modulbeschreibung #40772/4 Seite 1 von 1

Lernergebnisse Siehe Studien- und Prüfungsordnung. no translation

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Siehe Studien- und Prüfungsordnung.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Masterarbeit ICT Innovation StuPO 2016

Modultitel:

Masterarbeit ICT Innovation StuPO 2016

Master Thesis

Leistungspunkte:

30

Modulverantwortlicher:

Möller, Sebastian

Sekretariat:

keine Angabe

Ansprechpartner:

Möller, Sebastian

URL:

keine Angabe

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Abschlussarbeit benotet

10.11.2016 10:26 Uhr Modulbeschreibung #40819/1 Seite 1 von 1

Lernergebnisse Während genormte Produkte wie das Papierformat DIN A4 oft sehr bekannt sind, ist der Nutzen von Normen, ihre Entstehung auffreiwilliger Basis nach dem Konsensprinzip und ihre strategische Bedeutung für Unternehmen, Politik und Gesellschaft wenig oder gar nichtbekannt. Normung ist ein strategisches Element in Wirtschaft und Gesellschaft, z.B. zur Erleichterung des Austausches von Waren undDienstleistungen. Normung trägt dazu bei, technisches Wissen und Innovationen schneller zu verbreiten und im Markt zu platzieren unddamit die Wettbewerbsfähigkeit von Unternehmen auf nationaler, europäischer und internationaler Ebene zu stärken, aber auch dieIntegration ganzer Wirtschaftsräume, z. B. des einheitlichen europäischen Marktes, zu unterstützen. Der gesamtwirtschaftliche Nutzen von Normen, die heute neben Produkten und ihren Anwendungen auch Dienstleistungen undManagementsysteme umfassen, beträgt – wie eine wissenschaftliche Studie belegt – in Deutschland allein ca. 16 Mrd. € pro Jahr. Normungentlastet die staatliche Regelsetzung: der Staat konzentriert sich auf die Vorgabe wesentlicher Schutzziele, z. B. zur Sicherheit undGesundheit, die Detaillierung und Konkretisierung erfolgt durch Normen. Auf europäischer Ebene ist diese Wirkungsweise durch den NewApproach (Kombination von EG-Richtlinien und harmonisierten europäischen Normen) gegeben. Die Studierenden werden befähigt, die Erarbeitung von Normen auf nationaler, europäischer und internationaler Ebene nachzuvollziehenund die Rollen der Beteiligten zu verstehen. Sie können die deregulierende Wirkung von Normen erklären, insbesondere dasZusammenspiel von EG-Richtlinien und harmonisierenden europäischen Normen als Voraussetzung der CE-Kennzeichnung. Sie werdenbefähigt, Normen von Patenten abzugrenzen und beide als Technologietransferinstrumente einzusetzen, um Innovationen aufinternationalen Märkten zu platzieren. Es werden Methoden vermittelt, um den volks- und betriebswirtschaftlichen Nutzen von Normen zuermitteln. Standards and standardisation are ubiquitous. Successful examples are mobile telephones, which rapid diffusion benefited in Europe by thetimely release of the GSM standard, and laser technology, for which the German industry achieved via early standardisation a leadingposition both in Europe and worldwide. Some of these standards we are aware of like standardised paper sizes, standards in the www, plugs and sockets of electronic equipment,bolts matching nuts etc.. Other standards we may not be aware of like standards for the height of steps on a flight of stairs or standards forthe safety of playground equipment. Even though we might not be aware of all types of standards they both have an impact on our modern life and at the same time areimportant tools of strategical entrepreneurship as well as relevant for industry at large, policy and society. In this respect, the relevance of standards can take many forms, Some are elements of the technical infrastructure of our society. Otherstandards facilitate the exchange of goods and services. Other standards again provide users with a common terminology or acceptedaspects of measuring and testing. Standardisation can be channel of knowledge and technology transfer. Standards can contribute to theintegration of economic areas, like the Single European Market, via their integration into the European health, environmental and safetyregulations. Maybe most important from an economist and business perspective and at the same time surely the least understood aspect ofstandards and standardisation is their relationship to innovation. The reason for the lack of understanding of this relationship mainly is dueto the fact that standards do not automatically spur innovation. Rather, certain aspects of standards can have a beneficial effect while othersmight hold the danger of reducing innovation. The discipline of standardisation research can provide valuable insights into this relationshipand help to strengthen the positive aspects of standards and standardisation. This series of introductory lectures will cover the topic of standards and standardisation from a holistic perspective integrating findings fromthe field of standardisation research on the relation of standards and innovation, the role of standards in innovation policy as well aspractical knowledge about standards, standardisation and of standardisation work into a coherent curriculum. Students passing thiscurriculum will have a better understanding not only of the economic theories behind standards and standardisation but also will have abetter understanding how standards have an impact on microlevel of companies, the macrolevel of the national, european and globalinnovation landscape, the relevance of standards in innovation policy or R&D policy and the relation between standadisation andregulation. Moreover, the students will be introduced to the different institutions that make up the vast standardisation landscape at thenational, European and international level, how these levels and institutions interact, which rules govern standardisation and how bothpublic and private stakeholders can participate in successful standardisation work.

Modulbeschreibung

Strategic Standardisation

Modultitel:

Strategic Standardisation

Strategische Normung

Leistungspunkte:

6

Modulverantwortlicher:

Blind, Knut

Sekretariat:

keine Angabe

Ansprechpartner:

Essoun, Brigitte

URL:

http://www.inno.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

10.11.2016 10:26 Uhr Modulbeschreibung #70029/2 Seite 1 von 2

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Preferable: Basic skills in accordance with Business and Economics courses

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Exercise (guest lectures, homework assignments) 40Lecture (written test) 60

10.11.2016 10:26 Uhr Modulbeschreibung #70029/2 Seite 2 von 2

Lernergebnisse Die Fähigkeit einer erfolgreichen Anwendung vom gelernten Wissen über die Entwicklung von neuen Produkten und Geschäftskonzepten-Die Fähigkeit einer systematischen Untersuchung und Entwicklung von Ideen oder der Modifikation von existierenden Ideen, umNachfragen zu stillen-Die Fähigkeit einer systematischen Untersuchung von Hindernissen beim Aufbau von tragfähigen Geschäftskonzepten basierend aufTechnologien-Ein tiefgehendes Verständnis der unterschiedlichen Phasen des Geschäftsentwicklungsprozesses-Die Fähigkeit neue Ideen für eine kommerzielle Marktumgebung in Geschäftslösungen zu transformieren, kombiniert mitEntscheidungsfindungs- und Führungskompetenzen-Die Fähigkeit in multi-disziplinären Teams zu arbeiten-Die Fähigkeit ein Konzept vor einem internen und einem externen Publikum mit potentiellen Investoren zu präsentieren -The ability to successfully apply the learned knowledge for development of a new product or business concept-The ability to systematically explore and create ideas or modify existing business ideas for answering market needs-The ability to systematically explore obstacles in building a viable business concept based on a technology-An in-depth understanding of the different phases of a business development process-The ability to transform new ideas into business solutions for a commercial market environment, combined with decision-making andleadership competencies-The ability to work in multi-disciplinary teams-The ability to present a concept to an internal audience as well as to an external panel of financiers-The ability to reflect upon ethical and team processes.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Exclusively for students studying MSc ICT Innovation

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Venture Campus - ICT Innovation

Modultitel:

Venture Campus - ICT Innovation

Venture Campus - ICT Innovation

Leistungspunkte:

9

Modulverantwortlicher:

Kratzer, Jan

Sekretariat:

H 76

Ansprechpartner:

Perner, Susanne

URL:

http://www.venturecampus.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungselement Kategorie Gewicht Dauer

Evaluation of Business Plan Presentation 50Evaluation of written Business Plan 50

10.11.2016 10:26 Uhr Modulbeschreibung #70057/6 Seite 1 von 1

Lernergebnisse Im Modul “Human Side of Innovation” wird der gesellschaftliche Kontext für Kreativität und Innovation beleuchtet. Studenten werdenEinblicke über die Relevanz von Individuen, Gruppen und Gesellschaften für den kreativen Prozess und die Steuerung von Innovationbekommen. Dafür werden folgende Fragen aufgeworfen:–Was macht Individuen kreativ?–Unter welchen Voraussetzungen entsteht eine kreative Arbeitsumgebung?–Womit kann man Problemlösungskompetenzen fördern?–Wie entstehen Innovationen und wie verbreiten sie sich?–Welche gesellschaftlichen Faktoren beeinflussen Innovationen?–Wie können Manager und Organisationen diese Faktoren ausschöpfen? The module „Human Side of Innovation” explores the social context for innovation and creativity. Students will get a perspective on therelevance of individuals, groups and societies for the creative process and the management of innovations. To do this the course will aim toanswer questions like:–What makes individuals creative?–What makes for a creative workplace?–What can be done to increase problem-solving capabilities?–How do innovations emerge and diffuse in populations?–What social factors shape innovations?–How can managers and organisations exploit these factors?

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: There are no prerequisites for the participation in this module.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Human Side of Innovation

Modultitel:

Human Side of Innovation

Human Side of Innovation

Leistungspunkte:

6

Modulverantwortlicher:

Kleer, Robin

Sekretariat:

H 71

Ansprechpartner:

Kleer, Robin

URL:

http://www.tim.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) Modul Organisation und Innovationsmanagement Bestanden

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Exercise: Group presentation and seminar thesis 50Lecture: Exam (60 min.) 50

10.11.2016 10:26 Uhr Modulbeschreibung #70149/5 Seite 1 von 1

Lernergebnisse -Anwendung, Synthese und Bewertung früherer EIT Erkenntnisse im Kontext einer bestimmten Technologie-Eng verzahnt mit dem Pflichtpraktikum oder der technischen Abschlussarbeit. Zusammengefasst als: „Wissen – Wissen was“; „Fähigkeiten– Wissen wie“; und „Kompetenz – wie kann das Wissen angewendet werden“ Nach der Anfertigung der I&E Abschlussarbeit:..- kennen die Studenten den Innovationsprozess im Allgemeinen (Stufe 1, siehe Prozess). Sie kennen den aktuellsten Stand der Forschungeines bestimmten Innovationsmanagementprozesses im Detail (Stufe 2, siehe Prozess).- entwickeln die Studenten ihre Kenntnisse in Literaturrecherche und akademischem Schreiben. Sie sind sich der erforderlichenFähigkeiten für einen bestimmten Innovationsmanagementprozesses im Detail bewusst (Stufe 2, siehe Prozess).- können die Studenten die Anwendung von Innovationsmanagementtechniken in realen Innovationsmanagementprojekten kritischbetrachten und bewerten (Stufe 3, siehe Prozess). -Applying, synthesizing, and evaluating prior EIT learning in the context of a specific technology. -Tightly integrated with mandatory internship and technical thesis, which can be framed into ‘Knowledge – know what’; ‘Skills – know how’;and ‘Competence – know to apply’ After completion of the I&E study, students…- know about the innovation process in general (step 1, see process). They know about the state of the art of a particular innovationmanagement process in depth (step 2, see process).- have developed skills in literature analysis and academic writing. They are aware of state-of-the-art skills of a particular innovationmanagement process (step 2, see process).- can discuss critically the applicability of a set of innovation management techniques in the setting of a particular real-life innovationmanagement project (step 3, see process).

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Participation in M. Sc. ICT Innovation

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

I&E Study

Modultitel:

I&E Study

I&E Studie

Leistungspunkte:

6

Modulverantwortlicher:

Kratzer, Jan

Sekretariat:

H 76

Ansprechpartner:

Michelfelder, Ingo

URL:

http://www.entrepreneurship.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

schriftlich benotet

10.11.2016 10:26 Uhr Modulbeschreibung #70151/3 Seite 1 von 1

Lernergebnisse Die Innovationsfähigkeit sichert die Wettbewerbsfähigkeit eines Hochlohnlandes und seiner Unternehmen. Innovationen stellen aber auchdie klassischen Gleichgewichtsmodelle der Volkswirtschaftslehre in Frage. Ziel der Veranstaltung ist es zunächst verschiedenen Innovationstypen zu vermitteln und dabei auch auf die Methoden der empirischenInnovationsforschung abzuheben. In einem zweiten Abschnitt werden die verschiedenen innovationsökonomischen, unter anderemneoklassische, evolutorische und historisch-institutionelle Ansätze vermittelt. Die Veranstaltungen des Moduls befinden sich einerseits im Spannungsfeld der theoretischen Modelle und deren empirischer Anwendung,andererseits wechseln sich mikro- und makroökomomische Perspektiven ab. Die Studierenden werden dazu befähigt, Innovationen in ihren marktwirtschaftlichen Kontext zu setzen und ihre Erfolgspotentialeeinzuschätzen. Sie erhalten ein umfassendes Verständnis über die Eigenschaften von Innovationsprozessen und lernen diese Prozesseaktiv zu gestalten. Der Einblick in ökonomische Auswirkungen von Innovationen erlaubt es, diese in unternehmerische Überlegungen miteinfließen zu lassen. The ability to innovate ensures the competitiveness of high-income countries and its enterprises. At the same time innovations question theclassical economic equilibrium models. The course intends to shed light on different typologies of innovations, also considering multiple methodologies of empirical research ininnovation economics. The second part of the course deals with different explanatory approaches of innovation economics: amongst othersneo-classical, evolutionary and historic-institutional ones. The course studies both theoretical models and their empirical application, changing between micro and macro-economic perspectives.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic skills have to be in accordance to all A-Business and A-Economics courses and, if necessary, have to be certificated.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Innovation Economics

Modultitel:

Innovation Economics

Innovationsökonomie

Leistungspunkte:

6

Modulverantwortlicher:

Blind, Knut

Sekretariat:

keine Angabe

Ansprechpartner:

Essoun, Brigitte

URL:

http://www.inno.tu-berlin.de.

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Exercise (mid-term exam, presentation, discussion) 40Lecture (written test) 60

10.11.2016 10:26 Uhr Modulbeschreibung #70159/2 Seite 1 von 1

Lernergebnisse -In depth understanding of the general process and roles involved in developing an idea and starting up a new technology-based company-The ability to systematically explore customers and markets-In depth understanding and the ability to systematically explore business organization and projects-In depth understanding and the ability to systematically explore basic product and process development-In depth understanding and the ability to systematically explore basic entrepreneurial finance-In depth understanding and the ability to systematically explore the important elements in managing companies and developing its humanresources -Tiefgehendes Verständnis der generellen Prozesse und involvierten Rollen in Ideenentwicklung und Gründung eines neuen technologie-basierenden Unternehmens-Die Fähigkeit systematisch Märkte und Kunden zu untersuchen-Tiefgehendes Verständnis und die Fähigkeit systematisch Unternehmensorganisationen und Projekten zu erforschen-Tiefgehendes Verständnis und die Fähigkeit systematisch grundlegende Produkt- und Prozessentwicklungen zu erkunden-Tiefgehendes Verständnis und die Fähigkeit systematisch Fragen der Finanzierung junger Unternehmen anzugehen-Tiefgehendes Verständnis und die Fähigkeit einer systematischen Herangehensweise an essentiellen Elemente des Managens vonUnternehmen und Entwicklung deren Humanressourcen

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: There are no prerequisites for the participation in this module.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Innovation Management & Entrepreneurship Basics

Modultitel:

Innovation Management & Entrepreneurship Basics

Innovationsmanagement & Entrepreneurship Grundlagen

Leistungspunkte:

6

Modulverantwortlicher:

Kratzer, Jan

Sekretariat:

H 76

Ansprechpartner:

Kempmann, Nora

URL:

http://www.entrepreneurship.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Presentation/Essay 50Written Test 50

10.11.2016 10:26 Uhr Modulbeschreibung #70160/2 Seite 1 von 1

Lernergebnisse Die Kursteilnehmer erlangen Kenntnisse über die Konzepte und Schlüsselprinzipien des Marketings innovativer Produkte undDienstleistungen. Sie kennen Strategien, Methoden und spezifische Instrumente zur Gewährleistung eines marktorientiertenInnovationsprozesses. Absolventen des Kurses sind in der Lage, verschiedene Arten von Innovationen zu beschreiben und Auswirkungen für das Marketingabzuleiten. Zusätzlich können sie beschreiben, wie ein geeigneter Markt ausgewählt wird und wie die Innovation im Vergleich zu anderenLösungsansätzen positioniert wird. Auch wie die Vorteile der Innovation kommuniziert, effektive Preise gesetzt und geeigneteDistributionskanäle ausgewählt werden, wird im Kurs erörtert. The course participants have knowledge of the principal concepts and key principles of the marketing of innovative products and services.They are able to recall strategies, methods and specific instruments that can ensure market-oriented innovation processes. Graduates of the course are able to describe different types of innovation and are able to derive marketing implications. Furthermore,participants are able to describe how to select the appropriate target market, how to position the innovation relative to other solutions, howto communicate its benefits, set effective prices and select appropriate distribution channels, and how to develop solid relationships andalliances.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: There are no prerequisites for the participation in this module.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Innovation Marketing

Modultitel:

Innovation Marketing

Innovationsmarketing

Leistungspunkte:

6

Modulverantwortlicher:

Klasse-Talke, Katrin

Sekretariat:

H 95

Ansprechpartner:

Klasse-Talke, Katrin

URL:

http://www.marketing.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) Modul Marketing und Produktionsmanagement Bestanden

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Tutorial assignments 50Written exam (60 min.) 50

10.11.2016 10:26 Uhr Modulbeschreibung #70161/5 Seite 1 von 1

Lernergebnisse Aufbauend auf der Vorlesung Innovationsökonomie wird der Fokus auf die Innovationspolitik gelegt. In einem ersten Schritt werdenzunächst verschiedene ökonomische Begründungen für staatliches Engagement im Bereich Innovation vorgestellt. Dabei sind Markt- undSystemversagensansätze im Fokus. In einem zweiten Schritt wird die Entwicklung der innovationspolitischen Initiativen auf nationaler, europäischer und internationaler Ebenevorgestellt und analysiert. Die Studierenden sollen durch diese Veranstaltung ein generelles Verständnis für staatliche Innovationspolitikvermittelt bekommen, aber auch Kenntnisse zu spezifischen innovationspolitischen Programmen. Die Studierenden werden befähigt, Entwicklungen in der Innovationspolitik zu verstehen und diese kritisch zu diskutieren. Dabei sollgenerell die wissensbasierte / analytische Fähigkeit zum Public Policy Management (Instrumentendesign, Implementierung und Evaluation)vermittelt werden. Das Verständnis des innovationspolitischen Kontextes erlaubt es außerdem, staatliche Regulation in unternehmerischeÜberlegungen einfließen zu lassen. Based on the lecture Innovation Economics this course puts the focus on Innovation Policy aspects. In a first step, various economicjustifications for government involvement in innovation activities will be presented with a focus on market and system failure aspects. In a second step, the development of Innovation Policy initiatives at National, European and International level will be presented andanalyzed. The course provides a general understanding of government´s Innovation Policy as well as knowledge about specific InnovationPolicy programs. Students learn to understand developments in Innovation Policy and to discuss them critically. The general analytical abilities for PublicPolicy Management (instrument design, implementation and evaluation) are taught in an appropriate way. The contextual understanding ofinnovation policy also makes it possible to incorporate government regulation in business considerations.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic skills have to be in accordance to all A-Business and A-Economics courses. Basic knowledge ofeconomics and business administration is required to be able to reasonably follow the course. It isrecommended to visit the course “Innovation Economics” beforehand.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Innovation Policy

Modultitel:

Innovation Policy

Innovationspolitik

Leistungspunkte:

6

Modulverantwortlicher:

Blind, Knut

Sekretariat:

keine Angabe

Ansprechpartner:

Essoun, Brigitte

URL:

http://www.inno.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Exercise (guest lectures, homework assignments) 40Lecture (written test) 60

10.11.2016 10:26 Uhr Modulbeschreibung #70162/2 Seite 1 von 1

Lernergebnisse Ziel der Veranstaltung ist es den Teilnehmer einen umfassenden Überblick über den Umgang und den Schutz geistigen Eigentums zuermöglichen und die Grundlagen des IP-Managements zu vermitteln. Dazu gehören neben formellen Schutzmaßnahmen (Patente, Marken,Copyright, Gebrauchs- und Geschmacksmuster) auch der informelle Schutz des geistigen Eigentums (Geheimhaltung, aber auchtechnische Lösungen, etc.). Zusätzlich befasst sich die Veranstaltung mit strategischem Schutzverhalten und verschiedenen alternativenVerwertungs- und Durchsetzungsprozessen geistigen Eigentums, bspw. im Rahmen von Forschungskooperationen bis hin zuTransferprozessen und Technologiemärkten. Darüber hinaus werden diverse aktuelle Problemstellungen in den Schutzrechtssystemaufgegriffen, potentielle Entwicklungsszenarien beschrieben und Lösungsansätze aufgezeigt. Ausgewählte Gastvorträge gewährleisteneinen hohen Praxisbezug. Die theoretischen und empirischen Erkenntnisse der Vorlesungsveranstaltungen werden ergänzt durch einen im Rahmen derÜbungsveranstaltung stattfindenden Workshop mit Partnern aus der Industrie, in dem die Studierenden realitätsgetreue Fälle bearbeitenund lösen. Die Studierenden werden befähigt, Unterschiede zwischen den Methoden und Instrumenten des Schutzes geistigen Eigentums zuerkennen und dabei die Vor- und Nachteile kritisch abzuwägen. Dabei wird in geeigneter Weise vermittelt, ökonomische Modelle in dieAnwendung im Management zu überführen. So ist es ihnen bspw. möglich, zu bewerten, welche Methoden und Instrumente zu einersinnvollen Unternehmensstrategie kombiniert werden können. The course is intended to give the students a broad overview concerning the exploitation and protection of intellectual assets and to conveythe basic principles of Intellectual Property (IP) Management. Relevant topics are means of formal protection (patents, brands, copyrightaspects, utility models etc.) as well as means of informal protection of IP assets (secrecy, technical solutions etc.). Furthermore, the coursecovers the fields of protection strategies and alternative ways of appropriation and enforcement of intellectual property, referring to researchco-operations, knowledge transfer processes and markets of technology. In addition, current topics and problems with respect to legalsystems display another field, potential scenarios of this system will be presented and solution approaches suggested. Selected guestlectures provide a high practical relevance. As part of the exercise a workshop held by industry partners supplements the theoretical and empirical knowledge from the lecture. Duringthe workshop the students will analyze and solve realistic case studies. Alternatively, the students may participate in a seminar where theydiscuss and illustrate the topics of the lectures with the help of current events. Students learn to recognize differences between the methods and instruments of intellectual property protection while critically weighingtheir pros and cons. It is taught in an appropriate way to transfer economic models into practical management use. Thus it is possible, forexample, to assess which methods and instruments may be combined for creating a reasonable business strategy.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic skills have to be in accordance to all A-Business and A-Economics courses. Basic knowledge of economics and businessadministration is required to be able to reasonably follow the course. It is recommended to visit other courses at our chair “InnovationEconomics”, “Innovation Policy” and “Strategic Standardisation”. When in doubt students may contact the respective teachers of the IPmanagement course.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Intellectual Property Management

Modultitel:

Intellectual Property Management

Intellectual Property Management

Leistungspunkte:

6

Modulverantwortlicher:

Blind, Knut

Sekretariat:

keine Angabe

Ansprechpartner:

Essoun, Brigitte

URL:

http://www.inno.tu-berlin.de.

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

10.11.2016 10:26 Uhr Modulbeschreibung #70167/2 Seite 1 von 2

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Exercise (case study, presentation, final report) 50Lecture (written test) 50

10.11.2016 10:26 Uhr Modulbeschreibung #70167/2 Seite 2 von 2

Lernergebnisse Das Modul analysiert den Einfluss von Open Source und Peer Production auf Wirtschaft und Gesellschaft. Insbesondere beleuchtet es denKonflikt zwischen offener Innovation und gewerblichen Schutzrechten, die Motivation und Organisation von Open-Source-Communitiessowie die wirtschaftliche Bedeutung von Open-Source-Software. Absolventen des Moduls verstehen die Implikationen von Open Source auf Produkte und IP in Unternehmen. Sie sind in der Lage, denEinsatz von Open-Source-Software in Unternehmen zu bewerten und Strategien für die Zusammenarbeit mit und Mitarbeit in Open-Source-Projekten zu entwickeln. The course analyzes the influence of Open Source and Peer Production from an economic, political and societal point of view. In particular,it will deal with the potential conflict between Open Innovation and traditional formal protective rights, the motivation and organization ofOpen Source communities, and the economic impact of Open Source. The participants will learn about the implications of using and contributing to Open Source projects in enterprises. The course will enablethem to assess and evaluate the use of Open Source products, and develop strategies for cooperation and collaboration with Open Sourcecommunities.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Basic Knowledge of lectures in Innovation Economics and IP Management.

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Open Source and IP in the Digital Society

Modultitel:

Open Source and IP in the Digital Society

Open Source und IP in der digitalen Gesellschaft

Leistungspunkte:

6

Modulverantwortlicher:

Blind, Knut

Sekretariat:

keine Angabe

Ansprechpartner:

Essoun, Brigitte

URL:

http://www.inno.tu-berlin.de.

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Presentation 50Written report 50

10.11.2016 10:26 Uhr Modulbeschreibung #70200/2 Seite 1 von 1

Lernergebnisse Nach Teilnahme an diesem Kurs sollen die Studierenden in der Lage sein(1)Kernkonzepte und Theorien zu verstehen und kritisch darüber zu reflektieren,(2)Konzeptionelle und empirische Forschungsartikel des strategischen Innovationsmanagements zu verstehen und kritisch darüber zudiskutieren(3)Praktische Herausforderungen des strategischen Innovationsmanagements zu analysieren und Lösungen zu entwickeln(4)Ansätze des strategischen Innovationsmanagements anzuwenden und die jeweiligen Stärken und Schwächen zu verstehen After participating in this course, students should be in a position to:(1) understand and critically reflect upon key concepts and theories in strategic innovation management(2) understand and critically discuss conceptual and empirical research papers on strategic innovation management,(3) analyze and develop adequate solutions to some of the practical challenges of strategic innovation management, and(4) apply important tools in strategic innovation management intelligently based on a thorough understanding of their respective strengthsand weaknesses.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: The Human Side of Innovation

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:

Abschluss des Moduls

Modulbeschreibung

Strategic Innovation Management

Modultitel:

Strategic Innovation Management

Strategisches Innovationsmanagement

Leistungspunkte:

6

Modulverantwortlicher:

Kleer, Robin

Sekretariat:

H 71

Ansprechpartner:

Kleer, Robin

URL:

http://www.tim.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

1.) Modul Organisation und Innovationsmanagement Bestanden

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examinaton consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Group presentation and seminar thesis 50Written exam (60 min.) 50

10.11.2016 10:26 Uhr Modulbeschreibung #70233/4 Seite 1 von 1

Lernergebnisse Ziel des Moduls ist es, die Studenten in Ansätze der Branchenanalyse und aktuelle Top-Management-Probleme von Unternehmeneinzuweisen. Die Studenten sollen lernen, wie sie die Instrumente der Branchenanalyse selbst anwenden und die Analyseergebnisse fürEntscheidungen im späteren Arbeitsleben nutzen können. Mit Unterstützung von Experten aus der Praxis wird den Studenten zudembeigebracht Fallstudien professionell zu präsentieren und ihren Standpunkt in einer englischen Diskussion zu vertreten. Darüber hinaussollen die Studenten lernen, Lösungen für strategische Probleme abzuleiten und somit auf die Herausforderungen zu reagieren, denen sichmodernes Management stellen muss. The objective of this module is to instruct students in approaches of industry analysis and current problems of top management ofcorporations. The students shall learn how to handle these instruments themselves and how they can learn from this analysis for their futurework career. With the support of industry experts, the students are taught to present professional case studies and how to stand theirground in an English discussion. Furthermore, the students should learn how to derive solutions for strategic problems, and thus how tomanage the challenges with which modern management has to deal.

Voraussetzungen für die Teilnahme / Prüfung Wünschenswerte Voraussetzungen für die Teilnahme zu den Lehrveranstaltungen: Previous participation in our bachelor module „Grundlagen des Strategischen und Internationalen Management“ or comparable courses

Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung: keine Angabe

Abschluss des Moduls

Modulbeschreibung

Strategic Management

Modultitel:

Strategic Management

Strategisches Management

Leistungspunkte:

6

Modulverantwortlicher:

Knyphausen-Aufseß, Dodo

Sekretariat:

H 92

Ansprechpartner:

Wendland, Maren

URL:

http://www.strategie.tu-berlin.de

Modulsprache:

Englisch

Kontakt:

[email protected]

Prüfungsform: Benotet: Dauer:

Portfolioprüfung benotet

Notenschlüssel:Kein Notenschlüssel angegeben...

Prüfungsbeschreibung:

The portfolio examination consists of the following elements, adding up to a maximum of 100 credits. The grading follows the jointconversion key of the School of Economics and Management (decision of the school's council dated May 28, 2014 - FKR VII-4/8-28.05.2014).

Prüfungselement Kategorie Gewicht Dauer

Case study 30Written test in the "CSCO" course 35Written test in the "SMOC" course 35

10.11.2016 10:26 Uhr Modulbeschreibung #70234/3 Seite 1 von 1