seavi 14 boxes for telecommunications (c.t.i.), flush mounted

3
SEQUENCE OF ASSEMBLING FOR BOX REF.23135 The assembling it´s the same for all references in this serie GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The boxes for telecommunication CTI are, flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. They have several input footprints for tubes and does not need any tools for its drilling. Bottom grooving for fixing the various elements of CTI. These boxes are modular and can bind to each other by pieces of link and have dividing guides for its division. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 0.50 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar. 49 FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall. Boxes for telecommunications (C.T.I.), flush mounted Common tetecommunication infraestructures

Upload: seavi-slu

Post on 12-Mar-2016

212 views

Category:

Documents


0 download

DESCRIPTION

Boxes for telecommunications (C.T.I.), flush mounted

TRANSCRIPT

Page 1: Seavi 14 Boxes for telecommunications (C.T.I.), flush mounted

SEQUENCE OF ASSEMBLING FOR BOX REF.23135 The assembling it´s the same for all references in this serie

GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The boxes for telecommunication CTI are, flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. They have several input footprints for tubes and does not need any tools for its drilling. Bottom grooving for fixing the various elements of CTI. These boxes are modular and can bind to each other by pieces of link and have dividing guides for its division. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 0.50 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar.

49

FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall.

Boxes for telecommunications (C.T.I.), flush mounted Common tetecommunication infraestructures

Page 2: Seavi 14 Boxes for telecommunications (C.T.I.), flush mounted

REF. 23135 REF. 23225 REF. 23226

Pieces/Packing: 1 Unit Price: 42,8790 €

Measures mm: 380 x 445 x 83 Pieces/Packing: 1 Unit Price: 21,8270 €

Measures mm: 410 x 483 x 12 Pieces/Packing: 2 Unit Price: 21,8270 €

BOX FOR CTI WITH DOOR 380 x 455 x 80 mm

BOX FOR REF. 23135

FRAME + DOOR FOR BOX REF. 23135 - 23142

REF. 23266 REF. 23265

REF. 23264

Pieces/Packing: 1 Unit Price: 31,7460 €

Measures mm: 275 x 383 x 83 Pieces/Packing: 1 Unit Price: 14,2970 €

Measures mm: 303 x 412 x 12 Pieces/Packing: 2 Unit Price: 18,1890 €

BOX FOR CTI WITH DOOR 450 x 215 x 80 mm

BOX FOR REF. 23266

FRAME+DOOR+SCREWS FOR BOX REF. 23266

50

Boxes for telecommunications (C.T.I.), flush mounted Common tetecommunication infraestructures

Page 3: Seavi 14 Boxes for telecommunications (C.T.I.), flush mounted

REF. 23328 REF. 23299

Measures mm: 170 x 100 x 40 Pieces/Packing: 10 Unit Price: 0,9920 €

Measures mm: 190 x 120 Pieces/Packing: 10 Unit Price: 1,0340 €

BOX FOR THE NETWORK TERMINATION 170 X 100 X 40 mm

LID FOR BOX REF. 23328

REF. 23330 REF. 23297 REF. 23036

Measures mm: 300 x 100 x 60 Pieces/Packing: 20 Unit Price: 2,4330 €

Measures mm: 320 x 120 Pieces/Packing: 20 Unit Price: 2,4880 €

Unit Price: 0,2650 €

BOX FOR THE NETWORK TERMINATION 300 X 100 X 60 mm

LID FOR BOX REF. 23330

DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23330

51

REF. 23327 REF. 23318

REF. 23035

Measures mm: 300 x 200 x 60 Pieces/Packing: 10 Unit Price: 4,3080 €

Measures mm: 320 x 220 Pieces/Packing: 10 Unit Price: 4,4100 €

Pieces/Packing: 25 Unit Price: 0,3750 €

BOX FOR THE NETWORK TERMINATION 300 X 200 X 60 mm

DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23327

Boxes for telecommunications (C.T.I.), flush mounted Common tetecommunication infraestructures

LID FOR BOX REF. 23327