security doors - portrisa · luxdoor is a pivot system door, with an outstanding appearance,...
TRANSCRIPT
-
SecurityDOORS
-
04 Structure05 Euro / Matrix06 Triel07 Hi-tech10 Power11 Ballistic12 Side window
13 Double Door14 Push16 Security Details18 Luxdoor22 Finishings26 Technical Drawings33 Certifications
02
-
hinges and bolts.Adjustable hinges made of steel and automatic mobile sillwith adjustment screw to prevent air, light and dust penetration. Each one of our doors is supplied with a job key, that will be replaced by unique final key once the installation is completed.
Portrisa’s high Security doors have an electro zinc plated steelbody, with double steel sheet on the outside, also with verticalomegas, making a solid constructed structure.To ensure more and better security, the doors structure isstrengthened even more on the areas surronding the lock,
THE SECURITY DOOR
03
-
The START door is built with an exterior layer of steel reinforced by 3sheared internal omegas meant tobestow door’s toughness.
Start series have 12 fastening points:• 4 deadbolts +1 latch lock• 1 top leading edge deadbolt• 1 bottom leading edge deadbolt• 4 hinge side bolts• 1 safety catch• 1 limitador de abertura
START SERIES
The MAX door is buit with an exteriorlayer of steel reinforced by 3sheared internal omegas meant tobestow door’s toughness.
Max Series have a total of 14 fastening points:• 4 deadbolts +1 latch lock• 2 top leading edge deadbolt• 2 bottom leading edge deadbolt• 4 hinge bolts• 1 safety catch
MAX SERIES
The door structure is made fromelectro zinc plated steel sheet of 1mmthickness forming vertical reeinforcements (omegas) welded by points (RSW). The end product is a steel reeinforced barrier with a total of64mm thickness, designed to resist tothe most advanced techniques ofintrusion. Besides the quality, doors aesthetics and style are not compromised.
COMPOSITION • Security Door
SUB-FRAME
Built with 2mm electro zinc plated steel, it stays firmly fastened to the concrete wall with 8 powerful antisliding steel ties. This sub-frame is equipped with special fasteners allowing vertical and horizontal fitting adjustment, as well as easy assembly of the frame and door. This makes all the door installation extremely easy, the door can be applied to the sub-frame afterwards, this procedure is easy and free from hassle, it can save your door panels from getting damaged during house finishing job.. 9
8
7
65
3 4
22
1
2
Frame and sub-frameVertical reinforcement omegasAdjustable hingesLeading edge boltsElectro zincked steel structureGreat-angular spyholeSafety catchHigh security lockFinishing panel
123456789
STRUCTURE
04
-
The high SECURITY PORTRISA door EURO modelcomes standard with a smooth turning europeancylinder system lock, armoured with steel plate, thecylinder is shielded by a protection manganese steel defender system. The lock comes along with the keys, which are small and very easy to handle. You can have multiple cylinders with only 1 master key. The door is provided with temporary key while the installation is taking place, this temporary key will be replaced by 5 fresh new ones afterwards.
The high SECURITY PORTRISA door MATRIX modelhas an easy and quiet double bit lock with easy combination swap. The lock is armoured with steel plate.Temporary key for door installation is supplied, oncethe door is installed, 5 new keys are delivered.
EURO
MATRIX
Euro-Profile Cylinder Lock
Employees keys
[Optional]
>Keyhole defendermade with hardenedmanganese steel
Double Bit Lock
>Easy key compbination swap
MODELS
05
-
The high SECURITY Portrisa door TRIEL model is providedwith a smooth turning european cylinder, is shielded by adefender protection manganese steel system. This lock canbe operated electronically and comes along with the key,which is small and very easy to handle. You can have multiplecylinders with only 1 master key. The door is provided with temporary keys while installation is taking place; the keys will be replaced by 5 new ones once the instalation is completed.
TRIEL
Triel Lock
06
-
The High SECURITY PORTRISA DOOR HI-TECH model isequipped with an electronic lock with a motor-driven boltclosing mechanism and a built-in digital control for easyoperation. It offers top noch security and reliability.An European profile cylinder (with traditional keys includedto use in case of emergency), shielded by manganese steeldefender, which is drill proof. The HI-TECH model is suppliedwith 3 electronic keys (transponders) that will activatethe lock by proximity.
Available colours:Chrome / Brass
Electronic Keys
HI-TECH
The finger scannercan record up to 99digital fingerprints,providing a personalized access.
Digital Fingerprintscanner [Option]
OPTION 1
The digicode allowsthe opening by a personal code up to 8digits.
Digicode [Option]
OPTION 2
07
-
08
-
09
-
Included features: • Adjustable mobile cill;• Safety catch, attached to the frame and enabled by button from interior;• HOPPE design handles and furniture;• Interior lever handle;• Exterior knob;• Latch adjuster (anti card);• Fireproof - EI230;• Fireproof - EI260.
POWERThe high Security Portrisa door POWER model is suited for newand refurbished apartments sector where both fire andanti-burglar performances are required. With double steel sheeton the outside also with vertical reinforcements, making a unitary construction with high-density rock-wool insulating inner layer and intumescent seal on the frame, enabling this security door to resist fire, to have accoustic and thermal insulations and to be burglar proof according to the European norms. The frame is made with 1,5mm thick steel plate.
10
-
BALLISTICThe high SECURITY door, ballistic models MAGNUM and NATO from PORTRISA,have in their core a bullet proof panel made of para-aramid military grade fiberlike KevlarTM. This bullet proof panel, together with the reinforced structure, make aballistic armour perfect for situations where there is a potencial threat of firearms use, for exemple: bank agencies, currency exchange bureaus, pawn shops,gold and jewlery shops, panic rooms.The door has a normal appearance with this type of covert ballistic protection,therefore, it can take by surprise any potential attackers, who will be unpreparedagainst this door. Distinct ballitic levels can be provided depending of the requisites:
Tested and certified EN1522 level FB4 (NIJ III-A) andFSG. This level includes all main handguns and alsothe shotgun:9 mm Glock 19.357 Desert Eagle.44 Smith & Wesson12 gauge Beretta
MAGNUM BALLISTIC DOOR
Tested and certified EN1522 level FB6 (NIJ III).This level includes the military calibres, 7.62mm e 5.56 mm for assault rifles:AK47 KalashnikovAR15/M16/M80
NATO BALLISTIC DOOR
KevlarTM ballistic panel
Ultra-resistent fibre, used by the policeand military on their bullet proof vests.Is made by multiple layers of kevlar typefibre and has a mechanical resistance5x superior to steel.
Reinforced structure.
In addition to the ballisticlayer, the door structure wasfurther reinforced and thenumber of locking pointswas increased to withstandthis type of attacks.
11
-
FIXOThe high SECURITY PORTRISA FIXO model can be produced with one of four lock types (Euro, Hi-Tech,Matrix or Triel). The side panel and fanlight are prepared to have 12mm multi-laminated glass panel.The glass is fastened to the frame with a simple trim.
1. Fanlight2. Side window3. Double side window
12
-
DOUBLE LEAFHigh SECURITY Door with two leaves, can be manufactured with different locking system, this front door has a great visual impact to your front entrance, giving your house a beautiful, imposing and secure entrance, matching the style of your home.
Passive leaf unlockingsystem.
The passive leaf lockcan be released ontop and bottom witha single “push-rotate”button which is easyto operate and safe..
Top bolt adjuster
Located on the frame,allows adjusting of thepassive leaf lockingposition, this providesfurther weathertightnessto the doorset.
13
-
PUSH
The high SECURITY PORTRISA door PUSH model, openstowards the outside and has high security lock.From the inside it can be operated with anti-panic lever.Provided with smooth Euro cylinder system lock,armoured with steel plate. The lock is shielded by adefender protection manganese steel system.
NoteWe produce this model onlywith full trim edges
Anti-panic bar PUSH model
14
-
15
-
SAFETY DETAILS
Security HingesThe hinges allow door heightadjustment. Its axle features aspherical bearing which allowsa smoother movement of thedoor.
4 Steel hinge bolts with15mm diameter that areplaced on the hinged side ofthe door. The door stays anchored and safely fastened.They provide true obstacleagainst crowbar and spannerforce.
Anti break-in bolts
16
-
Safety catchGreat-angular spyholeTwo colours available, Silverand Brass, has a big viewingangle of 180º.Optionally we can add a 2ndspyhole according to thehandicapped norms (PMR)
Integrated in the door,allows a small gap for interaction with the outsideby the easy turning of aknob.
Top and bottom deadboltsSecurity deadbolts placed on top and bottom of door’s leading edge. Driven by the lock itself, this bolts are made with nickeled solid steel rods.They hold the door tight fastened to the wall.
Anti-drill defenderConcealed hinge (option)
Adjustable latch seat safetyThe latch safety is an antiburglar system placed on the latch seat to avoid the picking and tampering of the latch using ATM card or X-Ray sheet and allows the adjustmet of the door closing strength.
The high security lock runssmoothly and has a latch andfour deadbolts made ofzincked steel with 18mmdiameter is protected by ananti-drilling plate.
Lock Automatic drop-down cillPlaced at the bottom of the door, this mobile cill is adjustable, providing against light, air, water and dust penetrations. It eliminates the gap between the door and the floor and brings acoustic attenuation.
Double rubber sealOne from the leaf side and thesecond from the frame side(picture), provide the completethermal and acustic insulation tothe doorset.They warrant a hermetic barrier tothe air, water and wind passage.
Hinge concealed inside the frame, adapted for the security door it can bear heavy doors and provides an outstanding aesthetics.
(for euro profile cylinder).Manganese steel block of high hardness and high resistance to piercing and drilling, protects the cylinder against perforation tool attacks to the cylinder from outside.
17
-
18
-
19
-
Luxdoor is a pivot system door, with anoutstanding appearance, developed tomeet even the boldest architectureproject. A feat of modern design, it’ s anicon of innovation, character and refinedtaste.
• This door is suited to big wall openings,matching the facade of your household exquisitely.
• It has a vertical pivot system which is adjustablein 3D.
• The door is made of an electro zinckedsteel structure combined with an outer steelplate. It’s reinforced by 5 vertical omegas,combined together to form a solid whole.
LUXDOOR
20
-
• The frame and the leaf edges are madeout of brushed stainless steel.
• LUXDOOR is equipped with eitherEuro or Matrix or Hi-tech lock.
• To ensure a high level of security, the dooris strengthened with 13 locking points, 4 ofwhich are located on the pivot side and theremaining 9 on the lock side.
• It has automatic drop down cillsinstalled, both on the bottom and on thetop of the door leaf, blocking the entranceof dust, light, water and air daughts.
21
-
Tubular doorhandle
(stainless steel)
Square doorhandle
(stainless steel)
Door handle with imbuedpanel (same colour as
outside panel)
Inside lever handle and escutcheon
Inside lever handle and escutcheon Swarovski (optional)
Can be flat with groove effectswithout stainless steel kick plate.
Can be flat with groove effectsand stainless steel kick plate
Grooves
Brushedstainlesssteel
POWDER COATED COLOURS POWDER COATED ALUMINIUM COLOURS
3D ADJUSTABLE PIVOTLOCKPIVOT SIDE DEADBOLTS
22
-
DECOR (melamine)
Wengue Mahogani Walnut USA CherrySucupira
Natural Oak Light Oak Beech
COLOURS · Interior finishings
Silvestre Pine
DECOR texturized (opcional)
CB Black Bespoke RAL coating(optional)
3Q D45 600 SP
PANELS WITH MOULDINGS - MDF Base panelscoated with melaminic paper imitating wood
1FR 1F-2FR 1FC-6FR 8FR 77 16 RCP-5RCS
WITH GROOVES - Melaminic and fenolic panels
701 600 16D45 D803Q
PANTOGRAPH - painéis com Valcor base
PANELS STYLE
Note: Imbuted stainless steel by request
23
-
COLOURS · Exterior Finishings
FENOLICS
PLYWOOD
Beech Light Oak Walnut Loft BrownOak
Mahogany
Oak Mahogany Walnut Wengue
Dark Mahogany Country WoodStriped Grey Loft Grey
Wengue Pacific Board Bespoke RAL (optional)
Nordic Black Grey (± RAL 7015)
3Q D45 600 SP
PANELS WITH MOULDINGS - MDF Base panelscoated with melaminic paper imitating wood
1FR 1F-2FR 1FC-6FR 8FR 77 16 RCP-5RCS
WITH GROOVES - Melaminic and fenolic panels
701 600 16D45 D803Q
PANTOGRAPH - painéis com Valcor base
PANEL STYLE
24
-
Note: Beech and Oak finishes cannot be used on the door RP model
Frames and edges
Grey± RAL 9007
White± RAL 9003
BeechOak Brown± RAL 8017
Stainless steel
(option)
Hinge covers
WhiteGrey Beech Oak Golden
Wood trim edge finish Steel trim edge finishing
ACCESSORIES
Aluminium threshold(Option)
Fixed on the floor, completely seals thewater, air and wind passage.
Aluminium thresholdand weather bar set (Option)Fixed aluminium cill.
Security window( (Option)Opaque double laminated glass withair chamber, powder coated aluminium or stainless steel beadings, allows the passage of light without compromising the level of security.
Tubular handle(Option)
Note2 sizes available:400mm / Ø 25mm1000mm / Ø 35mmStainless steel
Standard Brass furniture
Standard Chrome furniture
Square furniture (Option)
25
-
INSTALLATIONDRAWINGS
Installation with Plaster Finishings
01
123
456
Plaster / StuccoWall
Silicone joint(if necessary)
FrameSub-frame
Steel anchor
02Installation with
Marblefinishing
123
456
MarbleWall
Silicone Joint(if necessary)
FrameSub-frame
Steel anchor
03Installation withWood finishing
1234
567
FinishingFilling
WallSilicone joint(if necessary)
FrameSub-frame
Steel anchor
Lado interno26
-
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
START POWER
Cadre Standard
PORTE DE SÉCURITÉ
Schéma Technique - Porte Sécurité
Wooden finishing
800 x 2000/2040/2100
Height = 2400
Wall opening
A
Wall openingFree Passage
920 x 2060/2100/2160
Free Passage
Wal
l ope
ning
Thermal insulation filling(Porta model option)
Plasterboard (BA13) (Power model option)
Standard Dimensions
Width = 1100
Maximum production dimensions
970 x 2060/2100/2160
1020 x 2060/2100/2160
Free
Pas
sage
850 x 2000/2040/2100
900 x 2000/2040 /2100
TECHNICAL DRAWING • Standard Frame
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
START POWER
Cadre Standard
PORTE DE SÉCURITÉ
Schéma Technique - Porte Sécurité
Wooden finishing
800 x 2000/2040/2100
Height = 2400
Wall opening
A
Wall openingFree Passage
920 x 2060/2100/2160
Free Passage
Wal
l ope
ning
Thermal insulation filling(Porta model option)
Plasterboard (BA13) (Power model option)
Standard Dimensions
Width = 1100
Maximum production dimensions
970 x 2060/2100/2160
1020 x 2060/2100/2160
Free
Pas
sage
850 x 2000/2040/2100
900 x 2000/2040 /2100
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
START POWER
Cadre Standard
PORTE DE SÉCURITÉ
Schéma Technique - Porte Sécurité
Wooden finishing
800 x 2000/2040/2100
Height = 2400
Wall opening
A
Wall openingFree Passage
920 x 2060/2100/2160
Free Passage
Wal
l ope
ning
Thermal insulation filling(Porta model option)
Plasterboard (BA13) (Power model option)
Standard Dimensions
Width = 1100
Maximum production dimensions
970 x 2060/2100/2160
1020 x 2060/2100/2160
Free
Pas
sage
850 x 2000/2040/2100
900 x 2000/2040 /2100
25
a)
a) Cadreb) Pré-cadrec) Pâte de scellementd) Fixation du cadre aupré-cadree) Vantailf) Cautchoucg) Parcloseh) Omégas de renfort
1.5
Portrisa, S.A. © 2015 - Tous droits réservés
Revêtement en bois
PORTE DE SÉCURITÉ
Dessin Technique
DÉTAIL A
f)
g)
h)
Détails Cadre Standard
e)
START POWER
48
48
18
64
b)
40
64
c)
d)
Plâtre (BA13)
Matériel isolant thermique
Schéma Technique - Porte Sécurité
SCHÉMA TECHNIQUE
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
START POWER
Cadre Standard
PORTE DE SÉCURITÉ
Schéma Technique - Porte Sécurité
Wooden finishing
800 x 2000/2040/2100
Height = 2400
Wall opening
A
Wall openingFree Passage
920 x 2060/2100/2160
Free Passage
Wal
l ope
ning
Thermal insulation filling(Porta model option)
Plasterboard (BA13) (Power model option)
Standard Dimensions
Width = 1100
Maximum production dimensions
970 x 2060/2100/2160
1020 x 2060/2100/2160
Free
Pas
sage
850 x 2000/2040/2100
900 x 2000/2040 /2100
A
STANDARDFRAME DRAWINGS
TECHNICAL DRAWING • Standard Frame details
27
-
900 x 2000/2040 /2100
Portrisa, S.A. © 2015 - Tous droits réservésW
all d
imen
sion
Free
pas
sage
SCHÉMA TECHNIQUE
PORTE DE SÉCURITÉ
Dessin Technique
1020 x 2060/2100/2160
Schéma Technique - Porte Sécurité
970 x 2060/2100/2160
Free passage
Wall dimension
Height = 2400
800 x 2000/2040/2100
850 x 2000/2040/2100
B
920 x 2060/2100/2160
START POWER BF
Width = 1100
Cadre Pose en Tunnel
Wall dimensionsFree passage
Standard Dimensions
Maximum production dimensions
Wooden finishing
Thermal insulation filling((Power model option)
Plasterboard (BA13) (Power model option)
900 x 2000/2040 /2100
Portrisa, S.A. © 2015 - Tous droits réservés
Wal
l dim
ensi
on
Free
pas
sage
SCHÉMA TECHNIQUE
PORTE DE SÉCURITÉ
Dessin Technique
1020 x 2060/2100/2160
Schéma Technique - Porte Sécurité
970 x 2060/2100/2160
Free passage
Wall dimension
Height = 2400
800 x 2000/2040/2100
850 x 2000/2040/2100
B
920 x 2060/2100/2160
START POWER BF
Width = 1100
Cadre Pose en Tunnel
Wall dimensionsFree passage
Standard Dimensions
Maximum production dimensions
Wooden finishing
Thermal insulation filling((Power model option)
Plasterboard (BA13) (Power model option)
TECHNICAL DETAILS • MIDDLE OF THE DOORWAY FRAME (BF)
900 x 2000/2040 /2100
Portrisa, S.A. © 2015 - Tous droits réservés
Wal
l dim
ensi
on
Free
pas
sage
SCHÉMA TECHNIQUE
PORTE DE SÉCURITÉ
Dessin Technique
1020 x 2060/2100/2160
Schéma Technique - Porte Sécurité
970 x 2060/2100/2160
Free passage
Wall dimension
Height = 2400
800 x 2000/2040/2100
850 x 2000/2040/2100
B
920 x 2060/2100/2160
START POWER BF
Width = 1100
Cadre Pose en Tunnel
Wall dimensionsFree passage
Standard Dimensions
Maximum production dimensions
Wooden finishing
Thermal insulation filling((Power model option)
Plasterboard (BA13) (Power model option)
900 x 2000/2040 /2100
Portrisa, S.A. © 2015 - Tous droits réservés
Wal
l dim
ensi
on
Free
pas
sage
SCHÉMA TECHNIQUE
PORTE DE SÉCURITÉ
Dessin Technique
1020 x 2060/2100/2160
Schéma Technique - Porte Sécurité
970 x 2060/2100/2160
Free passage
Wall dimension
Height = 2400
800 x 2000/2040/2100
850 x 2000/2040/2100
B
920 x 2060/2100/2160
START POWER BF
Width = 1100
Cadre Pose en Tunnel
Wall dimensionsFree passage
Standard Dimensions
Maximum production dimensions
Wooden finishing
Thermal insulation filling((Power model option)
Plasterboard (BA13) (Power model option)
TECHNICAL DETAILS • Middle of the doorway fixation detail
PORTE DE SÉCURITÉ
Détails cadre pose en tunnel
8
d)
g)
a)
a) Cadreb) Renfort cadrec) Réglage (x11)d) Vis pour béton (x11)e) Vantailf) Parcloseg) Caoutchouch) Omégas de renfort
f)
1.5
h)
START POWER BF
Dessin Technique
Portrisa, S.A. © 2015 - Tous droits réservés
Plâtre (BA13)
Matériel isolant thermique
Revêtement en bois
Schéma Technique - Porte Sécurité
DÉTAIL C
SCHÉMA TECHNIQUE
64
38
b)
60
2550
e) c)
B
BF FRAMEDRAWING
Easy installation frame, it doesn’t need thetraditional sub-frame. This frame makes the
installation work very easy due to the 11 adjustablescrews fixed directly to the wall. The
frame can be in Brown, White or bespokeRAL.
28
-
Détails Cadre RP
49
a) Cadreb) Pré-cadrec) Fixationd) Fixatione) Vantailf) Cadre existantg) Parcloseh) Caoutchouci) Join intumescentj) Omégas de renfort
c)
e)
h)
i)
g)
1.5
b)
d)
Plâtre (BA13)
Matériel isolant thermique
DÉTAIL B
SCHÉMA TECHNIQUE
Dessin Technique
Schéma Technique - Porte Sécurité
j)
VAR
39
38
35
START POWER RP
f)
VAR
64
Portrisa, S.A. © 2015 - Tous droits réservés
PORTE DE SÉCURITÉ
Revêtement en bois
a)
TECHNICAL DETAIL • RP Frame
TECHNICAL DETAIL • RP Frame detail
START POWER RP
Free
pas
sage
Leaf
dim
ensi
on
C
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
Schéma Technique - Porte Sécurité
Maximum standard dimensionsFree passage: 2100x900Leaf dimension: 2123x945
ExtrapolationHeight: 1680mm / 2310mmWidth: 696mm / 957mmMax. area: 22106,7 cm2
Free passage
Leaf dimension
Cadre RP
PORTE DE SÉCURITÉ
Wooden finishing
Thermal insulation filling(Power model option)
Plasterboard (BA13) (Power model option))
START POWER RP
Free
pas
sage
Leaf
dim
ensi
on
C
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
Schéma Technique - Porte Sécurité
Maximum standard dimensionsFree passage: 2100x900Leaf dimension: 2123x945
ExtrapolationHeight: 1680mm / 2310mmWidth: 696mm / 957mmMax. area: 22106,7 cm2
Free passage
Leaf dimension
Cadre RP
PORTE DE SÉCURITÉ
Wooden finishing
Thermal insulation filling(Power model option)
Plasterboard (BA13) (Power model option))
START POWER RP
Free
pas
sage
Leaf
dim
ensi
on
C
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
Schéma Technique - Porte Sécurité
Maximum standard dimensionsFree passage: 2100x900Leaf dimension: 2123x945
ExtrapolationHeight: 1680mm / 2310mmWidth: 696mm / 957mmMax. area: 22106,7 cm2
Free passage
Leaf dimension
Cadre RP
PORTE DE SÉCURITÉ
Wooden finishing
Thermal insulation filling(Power model option)
Plasterboard (BA13) (Power model option))
START POWER RP
Free
pas
sage
Leaf
dim
ensi
on
C
Portrisa, S.A. © 2015 - Tous droits réservés
SCHÉMA TECHNIQUE
Dessin Technique
Schéma Technique - Porte Sécurité
Maximum standard dimensionsFree passage: 2100x900Leaf dimension: 2123x945
ExtrapolationHeight: 1680mm / 2310mmWidth: 696mm / 957mmMax. area: 22106,7 cm2
Free passage
Leaf dimension
Cadre RP
PORTE DE SÉCURITÉ
Wooden finishing
Thermal insulation filling(Power model option)
Plasterboard (BA13) (Power model option))
C
RP FRAMEDRAWING
Designed for a perfect and fast fit regardlessof the existing frame configuration (wood ormetal). Its smart adjustment allows thecorrection of all defects done on the initialinstallation.
VO
29
-
05Installation with
Side Window
123
Sub-frameFrame
Beading forglass fixation
06Installation with
Double sidewindow
123
Sub-frameFrame
Beading forglass fixation
TECHNICALDRAWINGSFanlight and side windows
DOO
R
1 A=2000 B=200 C=23602 A=2000 B=300 C=24603 A=2000 B=400 C=25604 A=2000 B=500 C=2660
Installation with Fanlight
07
123
Sub-frameFrame
Glass fixation beading
30
-
TECHNICALDRAWINGS
Luxdoor Pivot Door
LUXDOOR DIMENSION
40 40
53
78 78
82
27
(FP) 910(X) 194
1104(WD) 1200
9 9
9 9PIVOTPOINT
DIMENSÃO
(WD)Wall dimension
2065 a 3000 x 1100
2065 a 3000 x 1200
2065 a 3000 x 1300
2065 a 3000 x 1400
2065 a 3000 x 1500
2065 a 3000 x 1600
2065 a 3000 x 1700
2065 a 3000 x 1800
2065 a 3000 x 1900
2065 a 3000 x 2000
(FP) Free PassageDimension
(X)
(mm)
2020 a 2955 x 810
2020 a 2955 x 910
2020 a 2955 x 1010
2020 a 2955 x 1110
2020 a 2955 x 1110
2020 a 2955 x 1210
2020 a 2955 x 1310
2020 a 2955 x 1310
2020 a 2955 x 1410
2020 a 2955 x 1510
194
194
194
194
294
294
294
394
394
394
(VO) Vão-de-Obra(Alt. Min. a Alt. Máx. x Larg.) (Alt. Min. a Alt. Máx. x Larg.)
DIMENSION
2065 to 3000 x 1100
2065 to 3000 x 1200
2065 to 3000 x 1300
2065 to 3000 x 1400
2065 to 3000 x 1500
2065 to 3000 x 1600
2065 to 3000 x 1700
2065 to 3000 x 1800
2065 to 3000 x 1900
2065 to 3000 x 2000
(mm)
2020 to 2955 x 810
2020 to 2955 x 910
2020 to 2955 x 1010
2020 to 2955 x 1110
2020 to 2955 x 1110
2020 to 2955 x 1210
2020 to 2955 x 1310
2020 to 2955 x 1310
2020 to 2955 x 1410
WD2020 to 2955 x 1510
194
194
194
194
294
294
294
394
394
394
(Min. H to Max. H x W) (Min. H to Max. H x W)
(MU) Mur (PL) Passage LibreCôté(X)
DIMENSION
2065 to 3000 x 1100
2065 to 3000 x 1200
2065 to 3000 x 1300
2065 to 3000 x 1400
2065 to 3000 x 1500
2065 to 3000 x 1600
2065 to 3000 x 1700
2065 to 3000 x 1800
2065 to 3000 x 1900
2065 to 3000 x 2000
(mm)
2020 to 2975 x 810
2020 to 2975 x 910
2020 to 2975 x 1010
2020 to 2975 x 1110
2020 to 2975 x 1110
2020 to 2975 x 1210
2020 to 2975 x 1310
2020 to 2975 x 1310
2020 to 2975 x 1410
2020 to 2975 x 1510
194
194
194
194
294
294
294
394
394
394
(H Min. à H Max x L)(H Min. à H Max x L)
(PL)Passagem LivreDimensão
(X)
MEDIDAS
2065 a 3000 x 1100
2065 a 3000 x 1200
2065 a 3000 x 1300
2065 a 3000 x 1400
2065 a 3000 x 1500
2065 a 3000 x 1600
2065 a 3000 x 1700
2065 a 3000 x 1800
2065 a 3000 x 1900
2065 a 3000 x 2000
(mm)
2020 a 2975 x 810
2020 a 2975 x 910
2020 a 2975 x 1010
2020 a 2975 x 1110
2020 a 2975 x 1110
2020 a 2975 x 1210
2020 a 2975 x 1310
2020 a 2975 x 1310
2020 a 2975 x 1410
2020 a 2975 x 1510
194
194
194
194
294
294
294
394
394
394
(HO)Hueco Obra(Alt. Min. a Alt. Max. x Ancho) (Alt. Min. a Alt. Max. x Ancho)
(PL)Paso LibreDimensión
(X)
On the order form,consider the wall opening dimension
NOTE The height has 50mm increments85
40
40
78
78
(WD) 2065
(FP) 2020
ZERO LEVEL
CONCRETE
FLOOR FINISHING
PIVOT AXIS
TECHNICAL DRAWING • Example 2065x1200 (VO)
31
-
32
-
CERTIFICATIONS
Fire resistance according to NF-EN 1634-1:2000 norm | EI230Essay report nr. RS11-050/A andt RS11-050/B issued by C S T B laboratoryFireproof classification EI230Fireproof classification EI260
BM TRADA - Burglary resistance according to EN 1627:2011 normTest report nr. BMT/MTP/F14266/02 issued by BMTRADAClassification achieved: Class 3 / Class 3N
Certification A2P - Doorset - according to the reference «H64»Burglary resistance certification nº 26.81.64. issued by C N P P laboratory .Class BP1
SECURED BY DESIGN - Member Company and Accredited Organizationagreement with ACPO Crime Prevention Iniciatives.
Accoustic attenuation according to NF EN ISO 140-3 normEssay report nr. AC12 issued by CERIBOIS laboratoryPerformance of Rw(C;Ctr) = 41 (-3 ;-8) dB
BM TRADA - Weathertightness according to BS EN 1026 / BS EN 12207 / BS EN1027 / BS EN 12208 / BS EN 12211 / BS EN 12210 NormsAchieved results: AIR – 300Pa (Class 2) • WATER – 200 Pa (Class 5A) • WIND –1200Pa (Class A3). Issued by BMTRADA
Thermal insulation according to NF EN ISO 10077-1 / 10077-2 normThermal calculation Ud issued by CERIBOISPerformance Up = 1,6 w/(m2*K)
Weathertightness according to NF EN 14351-1 / NF EN 1026 / NF EN 12207 / NF EN1027 / NF EN 12208 / NF EN 12211 / NF EN 12210 / NF EN 12046-1 / NF EN 13115Achieved results: AIR - Classe Pmay A*3 • WATER - Classe E*28 • WIND - Classe V*C3Issued by CERIBOIS Laboratory
33
-
34
-
35
-
www.portrisa.com
Portrisa reserves itself the right of modifying at anytime, without previous notice, the characteristics of the products presented in this brochure.• All the content is PORTRISA’sproperty.• All rights reserved
ADDRESS | FACTORY | WAREHOUSEZona Industrial Ponte da PedraRua da Majoeira | Apartado 472416-901 LEIRIA | PORTUGALTelf.+ 351 244 720 610Fax + 351 244 720 [email protected]
BRANCH ALGARVER. da Escola, Arm. 1 e 2, EN125Patã de Cima8100-087 BoliqueimeALGARVE | PORTUGAL Telf. | Fax + 351 289 543 [email protected]
BRANCH LISBOAQta São João das AreiasRua A Lote 922685-002 SacavémLISBOA | PORTUGALTelf. | Fax + 351 219 412 619 [email protected]
BRANCH INDIAB1 - B2, Nandu SmrutiPurna, Bhiwandi421 302 Thane MAHARASHTRA | INDIATel. +91 9167206211Fax +91 [email protected]
Ref. CATPORT.EN.00.10.16