simple striped beach blanket - riley blake designs · cut 3 - 6 1/2” strips x wof (width of...

2
Simple striped Beach Blanket

Upload: others

Post on 13-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Simple striped Beach Blanket - Riley Blake Designs · Cut 3 - 6 1/2” strips x WOF (width of fabric). 2. Solid Stripes: Cut 11 - 3 1/2” strips Sewing Instructions: 1. Anchor Strips:

Simple striped Beach Blanket

Page 2: Simple striped Beach Blanket - Riley Blake Designs · Cut 3 - 6 1/2” strips x WOF (width of fabric). 2. Solid Stripes: Cut 11 - 3 1/2” strips Sewing Instructions: 1. Anchor Strips:

©2015 Riley Blake Designs and RBD Designers.

Finished Size: 52” x 69”

Fabric Needed:1. Anchor Stripes: 2/3 yard each of 4 fabrics.2. Solid Stripes: 1 1/4 yard3. Backing: 2 yards Home Dec fabric4. Four - 2” squares of fusible decor bond interfacing4. Four small tent stakes

Cutting Instructions:1. Anchor Stripes: From each of 4 fabrics: Cut 3 - 6 1/2” strips x WOF (width of fabric).2. Solid Stripes: Cut 11 - 3 1/2” strips

Sewing Instructions:1. Anchor Strips: Stitch together 3 strips end to end. Repeat for all 4 fabrics. Cut into segments: 2 - 52”.2. Solid Stripes: Stitch together 3 strips end to end. Repeat to make 3 long strips. Stitch remaining 2 strips together end to end. Cut into segments: 7 - 52”.3. Quilt Construction Stitch strips together in order according to the diagram. Press 2” square of fusible interfacing to each corner.

4. Quilting Layfinishedquilttopwithwrongsidestogetheron quilt back. Pin well. Stitch along each seam of quilt top to attach to backing.5. Binding Trim quilt back to 1” beyond quilt top. Turn over backing 1/2” and press. Turn over 1/2” again. Stitch along edge with straight, zig-zag or decorative stitch. Insert grommets in all four corners of quilt where the interfacing is. Use tent stakes to hold down your blanket when you are at the beach.

simple striped beach blanket