solar module assembly line from rising solar
TRANSCRIPT
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 1/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Laser Dicing Machine
Model No.: SYS 50
Equipment features:
△ Digital control X/Y table
△ Step motor driver
△ Precision movement under computer-controlled
△ Real-time display trajectory△ T-type structure of alternating worktable
△ YAG laser module & acoustic optical modulation system
△ Special control software, simply program editing and modify
△ Vacuum adsorption system with dual-position
△ High speed, high precision, full function and easy operation
△ 24-hour long continuous work, stable and reliable performance, low failure rate,
processing yield, and wide applicability.
Main technical parameters: ▽ Scriber precision:《 ±10μ m ▽ Scribing line width:《50μ m
▽Max scribing speed: 120mm/s ▽Worktable size: 350x350mm
▽ Laser wavelength: 1.064 μ m ▽ Max Scriber thickness: 1.2mm
▽ Repetition frequency:200Hz~50kHz
▽ Laser max power: 50W ▽ Power supply: 380V (220V)/50Hz/5kVA
▽ Cooling way: Integration constant temperature circulation water cooling
▽ Worktable: Double gas storages vacuum adsorption, T-type platform
double-position works in turn
▽Control way: Digital/Analog
Applicable field and market:
Laser scribing machine are used to scribe the mono-crystalline silicon solar cell,
poly-crystalline solar cell and silicon wafer.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 2/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Solar Cell Sorter and Tester
Model No.: SCT-B
Equipment features:
△ Through stimulates the solar spectrum lamp-house,
carries on the testing and surveys to the related electrical
parameter of cell module
△ High reliability, high precision, high efficiency. Thetime interval for each test only 3 seconds
△ AAA grade and A grade tester adopts imported top key
components and unique technology, ensures equipment work ing in more
stable performance and higher efficiency and lower breakage rate.Gold-plated
copper table, greatly reducing the contact resistance, make the measurement
more accurate.
△ Ability of continuous working all day
△ Cell measurement adopts four-wire connection, to ensure the accuracy of the
measurement
△ Reasonable structure, installation and maintenance more convenient and
simple
△ Unique original waveform diagnosis function, can quickly and accurately
determine equipment failure
△ It has unique apparatus of automatic modifying, to input the compensate
parameter, it will carry on automatic/ manual temperature compensation and
compensate with the light intensity, automatically measurements and modifies
the temperature. AAA grade and A grade compensation algorithm meet
IEC891: 1987 Standard
△ Based on the Windows operation interface, it has installed professionaltesting software. Humanized-design, all-round content, easy operating. It
records and displays the test curve(I-V curve/ P-V curve) and the test
parameter (Isc/ Voc/ Pmax/ Vm/ Im/ FF/ EFF/Temp/ Rs/ Rsh), the series
number is automatically produced to the assigned folder.
△ Convenient test results voice prompts and cell grading function.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 3/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
Main technical parameters:
Power supply 220V/50Hz/2KW
Lamp-house In line with IEC60904-9 spectral irradiance
distribution requirement (AM 1.5)
Light intensity 100mW/cm2 ( continuous adjustable range 70~
120mW/cm2)
Light intensity
non-uniformity
±3%
Instability degree of
irradiation
±2%
Test results
consistency
±1%
Test error of
electrical properties
≤±2%
Single flash time 10ms
Effective test area 200mm*200mm
Effective test range 0.1W~5W
Measuring voltage 0V~0.8V(resolution 1mV)
Measuring current 0mA~20A(resolution 1mA)Test parameters Isc、Voc、Pmax、Vm、lm、FF、EFF、Temp、Rs、
Rsh
Data acquisition 14-bit 4-channel high-speed synchronous acquisition
card.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 4/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Welding Platform (Assembler )
Model No.: R-WPF
Equipment features:
The equipped machines with the operation platform are the heating main board, the
welding template, temperature-adjusting iron (every machine are with 4 pieces of
irons), chair (every machines are with 4), the heating panel uses special aluminum
alloy materials and antioxidation treatment , the temperature control is more accurate,
which is controlled with PID support, it is easy to connect for heating module , thetemperature heating plate is uniform.
Main Technical parameters:
○ Operating platform: 850*2200mm
○ General height: 2300mm
○ Occupancy area: 2m*3m
○ Electrical source: 220V/50Hz, 20A
○ Template: 180*1600mm
125*12mm
156*10mm
○ Single heating board: 180*200mm
(two piece for one machine)
○ Main heating plate:1600mm*1800mm (one piece for one machine)
○ The temperature of heating plate: < ±2℃
○ Temperature control accuracy: ±1℃
○ Temperature setting range: 20~90℃
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 5/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Laying Platform
Model No.: R-LPF
Equipment features:
It can confirm the accurate place of every solar call and confirm the relative place
condition of the solar cell to each other,it can inspect the open-circuit and the short
circuit of the series solar cell by switching
Main technical parameters:
○ Power supply and voltage: AC220±10%
○ Power:8KW
○ Voltage :DC0~50V
○ Current :0~10A
○ Dimension:1800*1400*900mm
○ Weight:180kg
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 6/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Solar Module Laminator
Model No.: RC-AYB-2200*1750
Equipment features:
○ The roof cover of the equipment adopts the back-rise design,
the operation is convenient,fully automatic movement,touch
screen control,the parameter setting is intuitive and flexible○ Japan Mitsubishi PLC main machine matches high accurate 12 A/D exchanged
module and special oil temperature control module, imported low pressure electrical
components, the system control is flexible with high reliability
○ The heating board adopts advanced non-welded manufacturing technology , the
high flatness can satisfy the demand of solar module laminating ,at the same time,
the equipment adopts the conduction system by oil temperature heating and advanced
PID calculation, which can heat quickly the temperature control is flexible, the
temperature can compensate automatically by the EVA curve, the temperature
uniformity of the heating board is high
○ Laminating chamber adopts the special welding technology and high vacuum
sealing technology, the laminating effect is perfect and the amendment frequency is
low.
○ The roof cover has the anti-fold function design,which can lengthen the lifetime of
the rubber plate, it has the unique roof cover opening structure, the rubber plate
exchanging is fast and convenient.
○ It has comprehensive system security protection,4 cylinder control synchronously,
at the same time, it has the emergent button and the emergent cover-opening system
and the accurate alarm function.
Other types:
1. RC-AYB- 2200*2200
2. RC-AYB-1100*2200
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 7/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
Main technical parameters:
Max heating temperature of heating
board
180℃
Temperature controlling accuracy ±1℃
Power supply voltage 380V/ 3phase /4wires
Max power of equipment 27KW
Max power of equipment when normal
working
18KW
Air supply demand 0.8~1.2MPa
Compressed air flux 0.4~0.8 m3
/min
Vacuum limit 10Pa
Vacuum pump speed 70L/S
Laminating pressure 0.02~0.1Mpa
Dimension 2.5m×2.4m×1.4m
Effect laminating area 1750mm*2200mm
Equipment weight 4.2T
Occupancy area 4m×3m
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 8/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Automatic Solar Module Laminator
Model No.: RC-AYZ-3600*2200
Equipment features:
○ Equipment top cover adopts double track
up-and-down typed or back rise typed design,
handiness, unattended operation,touch screenControl, direct and flexible parameter setting.
○ Japan MITUBISH PLC main engine match with
high precision 12 A / D modular, imported low-voltage
component, flexible system control and high reliability.
○ Adopt unique oil temperature heat conductivity system and advanced PID
algorithm, rapid heating and has good uniformity.
○ Cavity adopts special process welding and high vacuum seal desigh, good
results of solar laminating, low repair.
○ Top cover use wrinkle professional design, easy to change rubber plate,
use high tore resistance rubber silica gel and has long service life.
○ It has complete system safety protection, emergency stop button,
emergency cover open button and accurate alarm function.
○ Special conductivity system conveyor adopts high tension low
flexibility static proof wear resistance high temperature resistance etc
special polyester material, which realize automatic feed in-and-out
control.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 9/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
Valid laminating area 3600mm*2200mm
Highest heating temperature 180℃
Uniformity of temperature ±1℃
Supply voltage 380v / 3 phase / 4 lead
Equipment maximum power 75kwMax power when normal working 22kw
Air supply requirement 0.5-0.8mpa
Compressed air rate 0.5 m3/S
Vacuum limitation 10Pa
vacuum pump rate 70L/S
Applicable scope simultaneity laminating of 4 piece of
170W cell module
Feed in-and-out rate 0.21m/s
Weight of equipment 17.8T
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 10/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Simulator (Solar Module Tester)
Model No.: SMT-B
Equipment features:
△ Through stimulates the solar spectrum lamp-house,
carries on the testing and surveys to the related electrical
parameter of cell module
△ High reliability, high precision, high efficiency. The
time interval for each test only 3 seconds
△ AAA grade and A grade tester adopts imported top key
components and unique technology, ensures equipment working in more
stable performance and higher efficiency
△ Ability of continuous working all day
△ Cell measurement adopts four-wire connection, to ensure the accuracy of the
measurement△ Reasonable structure, installation and maintenance more convenient and
simple
△ Unique original waveform diagnosis function, can quickly and accurately
determine equipment failure
△ It has unique apparatus of automatic modifying, to input the compensate
parameter, it will carry on automatic/ manual temperature compensation and
compensate with the light intensity, automatically measurements and modifies
the temperature. AAA grade and A grade compensation algorithm meet
IEC891: 1987 Standard
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 11/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
△ Based on the Windows operation interface, it has insta lled professional
testing software. Humanized-design, all-round content, easy operating. It
records and displays the test curve(I-V curve/ P-V curve) and the test
parameter (Isc/ Voc/ Pmax/ Vm/ Im/ FF/ EFF/Temp/ Rs/ Rsh), the series
number is automatically produced to the assigned folder.△ Convenient test results voice prompts and cell grading function.
Lamp-house In line with IEC60904-9 spectral irradiance
distribution requirement (AM 1.5)
Light intensity 100mW/cm2 ( continuous adjustable range 70~
120mW/cm2)
Light intensity
non-uniformity
≤±3%
Instability degree
of irradiation
≤±2%
Test results
consistency
≤±1%
Test error of
electrical
properties
≤±2%
Single flash time 10ms
Effective test area 2000mm×1100mm
Effective testrange
5W~300W
Measuring voltage 0V~30V(resolution 1mV)0V~30V/100V(resolution
1mV)
Measuring current 0mA~ 2A(resolution 1mA) 0mA~ 20A(resolution
1mA)
Test parameters Isc、Voc、Pmax、Vm、lm、FF、EFF、Temp、Rs、Rsh
Data acquisition 14-bit 4-channel high-speed synchronous
acquisition card.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 12/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Auto Solar Module Framing machine
Model No.: ZK-2
Equipment features:
○ ZK-2 auto solar module framing machine
is a special equipment of finishing to
locate frame and four square extrused for auto
solar module that has been smeared gum andassembled (the size of the Aluminum border’s
shape:35mm 、50mm). This is used to make solar
panel components in some special manufacturers.
○ The frame combing machine has the universal
wheels, which can ensure the free movement and
protect the solar panel surface, the operation
will be more convenient and the easy.
○ The frame combing machine has two-way fixed
end and the two-ways activities so the faming can be made in a wider space,in
additional, it also can satisfy the working demand of non-standard solar panel
Main technical parameters:
The smallest size of aluminum border 400X(W)350mm
The largest size of aluminum border 2000X(W)1100mm
Power supply 220VAir supply 0.5~0.7Mpa
Maximum framing length 1800mm
Minimum framing length 600mm
Maximum framing width 1000mm
Minimum framing width 600mm
Weight 500KG
Power 1.5KW
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 13/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Module carrier
Model No.: R-MC-AF/ R-MC-BE
Equipment function:
○ The module carrier is composed with the rolled steel welding and rubber
combination.
○ It can place 10 sets of 160~180W solar panel by one time.
○ The placing brackets have the rubber cover which can separate the steel structure, it
can avoid the dicing and the damage of the solar panel.
○ At the bottom there is the flexible wheels which can ensure the module carrier to
arrive at the appointed place.
○ When it arrives at the pointed place it can be locked at the pointed place, which will
not occur the accidental damage.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 14/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
EVA Cutting Table
Model No.: R-ECT
Function:The table for cutting the EVA and TPT before
the laminating (there is the storage cabinet)
Dimension: 1200X1800
Checking Table
Model No.: R-CHT
Equipment function:
It is used to check the order of the weldedsolar cells.
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 15/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Glass cleaning and drying machine
Model No.: BX1600
Equipment function:
The machine is the highly efficient glass
washing machine and be used to wash and dry glass
before manufacturing insulated glass which ensures the
cleaning of the glass surface. The machine is of horizontal
structure. And feeding, washing, drying and glass discharging can be operated
continuously. The automatic and practical equipment for manufacturing insulated
glass and the first choice equipment for glass processing industry.
Main technical parameter:
Power Supply 380v/50Hz
Input Power 11.5Kw
Cleaning (work) Speed 0-5m/min
Max Work Speed 5 m/min
Min Glass Size 450*450mm
Max Glass Size 2400*1600mm
Glass cleaning thickness 3-12mm
Outside Dimension 2850*1800*1200mm
Weight (about) 900Kg
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 16/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Double Heads Cutting Saw For Aluminum Profile
Model No.: LJZ2-450* 3700
Equipment function:
It is used for cutting and the processing of the aluminum profile with 45°90°this
machine adopts the sir-pressure transmission, straight moving manner, the feeding is
stable, the head unit is dragged by the motor, it has the structure of firm structure,
good solid, accurate processing, the cutting scope is wide, the processing is high, and
the operation is easy and convenient.
Main technical parameter
Working air pressure 0.5-0.8Mpa
Input power supply 380V/ 50Hz
Input power 3.6kWNumber of revolutions of saw blade 3087r/min
Saw blade specification D=450mm d=30mm
The cutting length of saw Min580mm Max 3700mm
The angle of the saw cutting 45°90°
Dimension 4500×1100×1400mm
Weight(about) 1250kg
8/7/2019 Solar module assembly line from Rising solar
http://slidepdf.com/reader/full/solar-module-assembly-line-from-rising-solar 17/17
QINHUANGDAO RISING SOLAR EQUIPMENT CO.,LTD Website: www.risingsolar.com
MSN: [email protected] E-mail:[email protected]; [email protected]
秦皇岛日上太阳能设备有限公司
QINHUANGDAO RISING SOLAR EQUIPMENT CO., LTD
Cutting Saw for Corner Yard
Model No.: LJJ-140
Equipment function:
it is used for the corner yard’s cutting, it is fully automatic, and it only need one time
installation,the number shows the cutting quantity, the spindle is made by the
professional production factories, impacting-oriented device ensures the cutting for
the 3mmcorner yard without residual cusp, hydraulic damping cylinder can promote
cutting-feed, the machine has good and the whole structure with good rigidity.
Main technical parameter:
Working air pressure 0.4-0.6Mpa
Input power supply 380V/ 50Hz
Input power 2.2kw
Number of revolutions of saw blade 3200r/min
The dimension of the saw blade D=450mm d=30mm
The length of the saw cutting Min120*180mm
Dimension 5500×1400×1600mm
Weight (about) 530Kg
Best wishes to your business and your family!