standing seam & corrugated skylights for metal roofs...•complies with osha regulations 29 cfr...
TRANSCRIPT
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 1
Standing Seam & Corrugated
Skylights for Metal Roofs for Rooftops, Skylights
The Standing Seam & Corrugated Skylight Screens are available in a range of sizes and configurations to retrofit your metal roof, from standing seam to corrugated fiberglass roof skylights. Our skylight safety systems are designed to be tough and reliable to provide you with years of fall protection. The Skylight Screens are installed for the following roof types:
Standing Seam Roofs
Corrugated Deck & R-Panel Roofs
PRODUCT LITERATURE
LINK TO INFO & PRICING
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 2
Features & Benefits
— Standing Seam Roofs —
The Skylight Screens for Standing Seam Metal Roofs are similar to regular corrugated fiberglass skylights – they are at the same level as the roof and have the same profile. They can be easily overlooked when a person is working or walking on the roof. Skylight Safety Screens are easy to install and allow for a proactive rather than reactive solution to a safety hazard.
• Complies with OSHA regulations 29 CFR 1910.23 and 1926.501. • For use with standing seam / trapezoidal standing seam fiberglass skylights. • Eliminates potential for personnel to fall through skylight. • Easily installed without use of special tools. • Does not compromise the energy-saving benefits of skylights. • Screen constructed of 3″ x 4″ welded wire mesh. • Minimum transverse diameter of 0.195”. • Screen hot dipped galvanized after welding. • PVC bumper extrusion installed around the perimeter of the screen. • Overall size of screen 3′-9″ x 11′-4″. • 20 gauge, 11′-4″ galvanized steel channel with 6 pre-punched holes provided. • The steel channel has tabs to receive the Skylight Safety screen.
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 3
INSTALLATION INSTRUCTIONS — STANDING SEAM ROOFS —
Do not place body weight on corrugated fiberglass at any time during installation. Standing seam fiberglass will not support body weight. Wear gloves when handling screen.
1) With the opening in the notches in the Standing Seam Skylight Screen rail facing upward (toward the ridge), attach the flange of the Skylight Screen rail to the outside of the standing seam (opposite the skylight) with the furnished stainless steel hex washer head self-drilling screws.
2) Slip the Skylight Screen into position onto the attached rails.
(click to enlarge)
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 4
— Corrugated Deck Metal Roofs —
The Skylight Screens for Corrugated Metal Roofs prevent falls through corrugated fiberglass skylights. They are easy to install and prove to be cost effective when compared to the potential time and money expended as the result of a fall-related accident. Often times, these skylight screens are difficult to detect by people on the roof because they are at the same level and have the same profile as the corrugated metal roof panels.
• Complies with OSHA regulations 29 CFR 1910.23 and 1926.501. • For use with standing seam / trapezoidal standing seam fiberglass skylights. • Does not compromise the energy-saving benefits of skylights. • Screen constructed of 3″ x 4″ welded wire mesh. • Minimum transverse diameter of 0.195”. • Screen hot dipped galvanized after welding. • PVC bumper extrusion installed around the perimeter of the screen. • Overall size of screen 3′-9″ x 11′-4″. • 20 gauge, 11′-4″ galvanized steel channel with 6 pre-punched holes provided. • The steel channel has tabs to receive the Skylight Safety screen. • Two 3’ x 3’ sealant adhesive pads and six special tek screws are furnished with each
channel.
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 5
INSTALLATION INSTRUCTIONS — CORRUGATED DECK METAL ROOFS —
Do not place body weight on skylight during installation. Use extreme caution when installing the Corrugated Skylight Screens and always wear gloves when handling skylight screens.
1) The Corrugated Skylight Screen channel is to be mounted on the highest corrugation nearest to the center of the skylight.
2) On the high end, the fiberglass skylight should be under the corrugated metal. Clean and install the 3′ x 3′ adhesive/sealant pads on the corrugated metal approximately 1” from the edge. Be sure to remove the release liner from the adhesive/sealant pads.
3) Position the Skylight Screen channel so that the three mounting holes in the channel are positioned over the 3’ x 3’ adhesive pads.
4) Fasten the high end of the Skylight Screen channel to the corrugated metal using the self-drilling screws.
5) Proceed to lower end of the Skylight Screen channel. Clean area under the three holes in the channel and install the 3’ x 3’ adhesive/sealant pads. Fasten the lower end of the Skylight Screen channel to the corrugated metal.
6) Center the Skylight Screen over skylight and insert the Skylight Screen under the tabs. Bend tabs over the Corrugated Skylight Screen.
(click to enlarge)
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 6
Models & sizes
SKU # Skylight Type
(Roof Type) Skylight Size (W x L)
PLA-F-310 Corrugated Fiberglass Skylights
(Corrugated Metal Roofs) 3' 9" x 11' 4" (45" x 136")
PLA-F-315 Corrugated Fiberglass Skylights
(Corrugated Metal Roofs) 3' 9" x 16' 4" (45" x 196")
PLA-F-410 Corrugated Fiberglass Skylights
(Corrugated Metal Roofs) 4' 6" x 11' 4" (54" x 136")
PLA-F-415 Corrugated Fiberglass Skylights
(Corrugated Metal Roofs) 4' 6" x 16' 4" (54" x 196")
PLA-TS-1810 Trapezoidal Fiberglass Skylights
(Standing Seam Metal Roofs) 1' 9" x 10' 8" (21" x 128")
PLA-TS-2410 Trapezoidal Fiberglass Skylights
(Standing Seam Metal Roofs) 2' 3" x 10' 8" (27" x 128")
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 7
Sizing Your Skylight
OSHA Skylight Regulations
1910.23(a)(4) Every skylight floor opening and hole shall be guarded by a standard skylight screen or a fixed standard railing on all exposed sides. 1910.23(e)(8) Skylight screens shall be of such construction and mounting that they are capable of withstanding a load of at least 200 pounds applied perpendicularly at any one area on the screen. They shall also be of such construction and mounting that under ordinary loads or impacts, they will not deflect downward sufficiently to break the glass below them. The construction shall be of grillwork with openings not more than 4 inches long or of slat work with openings not more than 2 inches wide with length unrestricted.
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 8
1926.501(b)(4)(i) Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes. 1926.501(b)(4)(ii) Each employee on a walking/working surface shall be protected from tripping in or stepping into or through holes (including skylights) by covers. 1926.501(b)(4)(iii) Each employee on a walking/working surface shall be protected from objects falling through holes (including skylights) by covers.
!! CAUTION !! This is a fall protection system. The system must be used in strict conformance with the manufacturer's instructions, refer to product manual. Failure to do so may result in serious injury or death. In the case of tie-off systems, do not use or operate the system unless you are properly trained. You are also encouraged to contact us in case of any questions. more info
© CAI Safety Systems | (888) 246-6999 | https://caisafety.com | [email protected] 9
Information Needed to Quote
By providing some basic information we can provide you with a custom proposal. Pictures and sketches are very helpful and if you prefer to speak with a fall protection expert just call or send us an e-mail. Fill out our Request a Quote form to send us your information.
Phone: (888) 246-6999
Website:
https://caisafety.com
Email: [email protected]
Some of Our Clientele