İstİm makİnesİ steam machine kullanma klavuzu / … · makinenin kullanıma hazırlanması: -...
TRANSCRIPT
Çelik Kuyumculuk Kalıp Makine San. Ve Tic.
Ltd. Şti.
Adres: Atatürk Mahallesi Marmara Sanayi Sitesi R Blok No:
455 İkitelli/Küçükçekmece İstanbul
Telefon: +90 212 494 44 60
Fax: +90 212 494 44 61
Web: www.steelkalip.com
E-mail adresi: [email protected]
İÇİNDEKİLER:
. Teknik Özellikler
. Genel Açıklamalar
. Makine Montaj Şeması
. Parça Listesi
. Makinenin Kullanıma Hazırlanması
. Dikkat Edilmesi Gereken Hususlar
. Makine Bakım ve Onarımı
Teknik Özellikler:
En, Boy, Yükseklik : *35 *45 *60
Net Ağırlık : 35 kg
Kullanılan elektrik : 220 V
Resistance Gücü : 6 Kw
Maks. Su Kapasitesi : 8 Litre
Maks. Çalışma Basıncı : 6 Bar
Genel Açıklamalar :
* Suyunu her gün doldurarak devamlı kuru ve basınçlı buhar elde
edebilirsiniz.
* Resistans koruyucu sayesinde su bitse bile otomatik enerji kesilir.
* Komple paslanmaz çelikten imal edilmiş olduğu için uzun ömürlüdür.
Makine Montaj Şeması:
Parça Listesi:
1. Basınç Göstergesi
2. Su Doldurma Yeri
3. Buhar Tahliye Yeri
4. Su Tahliye Yeri
Makinenin Kullanıma Hazırlanması:
- Su dolum yerinden makineye su doldurulur. Dolum işlemi bittikten sonra
vanası kapatılır.
- Elektrik fişini prize takın.
- Makine açılır.
- Manometrenin gösterdiği değerin 5 bar’a kadar çıkması beklenir ve
istenilen basınca ulaştığında makine kullanıma hazır hala gelmiş olur.
Dikkat Edilmesi Gereken Hususlar:
- Makine kesinlikle susuz çalıştırılmamalıdır.
- Su seviyesi sürekli kontrol edilmelidir. Aksi takdirde makine susuz
çalıştığından dolayı rezistansları hasar görebilir.
- Makine sıcak iken kesinlikle su tahliye vanası hava tahliye vanası
açılmamalıdır.
- Makinenin suyu boşaltılmadan önce içerisindeki buhar boşaltılır.
Makine Bakım ve Onarımı:
- Makinenin 15 günde bir su kazanının boşaltılıp temizlenmesi (su ile)
makinenin ömrünü uzatır.
CONTENTS:
. Technical Specifications
. General Description
. Mounting Sketch
. Parts List
. Use The Preparation of The Machine
. Issues to Be Considered
. Machinery Maintenance and Repair
Technical Specifications:
Width, Size, Height : *30 *45 *60
Net Weight : 35 Kg
Electric Used : 220 V
Resistance Force : 6 Kw
Max. Water Capacity : 8 L
Max. Working Pressure : 6 Bar
General Descriptions:
* Juice every day by filling out the continuous dry and pressurized
steam can be obtained.
* Water resistance thanks to the protective even if the energy runs out
automatically cut off.
* Complete stainless stell because it is so lasting.
Mounting Sketch:
Parts List:
1. Pressure Inducator
2. Water Filling Place
3. Steam Evacuation
4. Water Evacuation
Use The Preparation of The Machine:
- Filled with water to water filling valve. After you have finished
filling valve is closed
- Plug in power plug
- Turn on the machine
- Wait for until the value goes up to 5 bar on pressure inducator and
the machine is ready to work.
Issues to Be Considered:
- The machine must not be operated strictly without water.
- The water level should be checked constantly. Otherwise, the without water
Due to working with resistors may be damaged.
- When the machine is high temperature, water into the drain valve
and air relief valve remain closed.
- The machine before emptying the water, firstly steam must discharged.
Machinery Maintenance and Repair:
- Water tank be drained and cleaned every 15 days (with water) extends the
life of the machine.
Steel Mould and Machine
Address: Atatürk District Marmara Industrial Site
R Blok No:455 İkitelli - Küçükçekmece - İstanbul
Tel: +90 212 494 44 60
Fax: +90 212 494 44 61
Web: http://www.steelkalip.com/
E-mail: [email protected]
Address: Urom Persia Gold Address: Ltd. 13,Tsurupa str. MOSCOW &Jewelery PR.Co. Tel/Fax: (495) 718 41 01
Fahkt Atayi Bldy No:4 Atayi www.jeweller-partner.ru
Ave - Uromieh IRAN E-Mail: [email protected]
Phone: +98 441 223 52 98
Fax : +98 441 224 38 08
Cell: +98 914 346 37 62
Cell: +90 530 602 30 16
Cell: +90 530 602 30 15
www.urompersia.ir
E-Mail : peyman@urompersia