stone trailer truck...truck 6x4 ‘alien squidman’ with rolloader crane trailer (remote controlled...

These building instructions are for personal usage and may not commercially used and/or sold. LEGO is a trademark of the LEGO group of companies which does not sponsor, authorize or endorse these building instructions. Copyright design: Han Crielaard, year 2012 - 2013, www.designer-han.nl/lego

Stone Trailer Truck

( truck 6x4 )

Building instructions, part 2

EXAMPLE


Information

Truck 6x4 ‘Alien Squidman’

with Rolloader

Crane Trailer (Remote Controlled or Manual)

Dimensions

# Parts

Length

Width

Height

Weight•

Total Combination:

4.475

88 cm

14,5 cm

25 cm

4,7 kg (incl. Batteries)

•

Cargo length: 12 pallets•

Cargo height: 2½ Duplo® bricks• Crane reach: unloading pallets 22 cm aside of the trailer

Technic

functions•

Truck:

3 axle truck with single steering, headlights equipped with LED’s (Power Functions),•

working V8 engine with fan, interconnected with differential units on 2nd

and 3rd

axle (both twin-wheels),•

remote controlled steering and driving (PF M-motor, PF XL-motor); easily changeable to manual operation.•

Trailer:

2 axle assembly with all twin-wheels, rear axle steered & controlled by a PF ‘rechargeable battery box motor speed control dial’

in combination with the PF servo motor, spare wheel lifting winch and trailer stand mechanism.

•

Crane:

1st

& 2nd

boom lifted by PF linear actuators, 2nd

boom extension ~ 7 studs, 360°

slewing, ride on the trailer until first 2 swing panels. Clamp can be exchanged for a grabber.

Non-Technic

functions•

Truck cabin doors open & close, cabin can be opened for engine access, raise-able wind deflector, tow-bar.•

All trailer panels can swing down for unloading pallets.

Appearance details•

On the truck:

Dashboard with coffee machine, coffee cups. Fuel tank unit covering PF IR receiver, air compressors between rear wheels. Spotlights, flashlight & horns on cabin roof. Alien Squidman

on sun-screen.•

On the trailer:

Cupboards, air compressors behind rear wheel steering unit.•

On the crane:

Fuel tank & flash lights.

EXAMPLE


Building guidelines

The following guidelines will help you to build the model easily

•

The model consists of several sub models which should be built first. These sub models can be mounted as ‘one unit’

on a main model.

Notice that mostly the ‘final’

main model consists of multiple ‘sub main models’.

•

The standard way of building LEGO® Technic

models includes the usage of so-called 'axles and/or pins‘

to connect parts or sub models to the model.

Within the instructions, these ‘axles and/or pins’

mounting axles are mostly already in 'pushed' position. Keep this in mind when you want to mount individual sub models.

•

Connect all the pneumatic tubes directly to the pneumatic cylinders, switches and pumps

when you build or mount these parts. Otherwise you might not be able to connect them later on.

EXAMPLE

These building instructions are for personal usage and may not commercially used and/or sold. LEGO is a trademark of the LEGO group of companies which does not sponsor, authorize or endorse these building instructions. Copyright design: Han Crielaard, year 2012 - 2013, www.designer-han.nl/legoEXAMPLE


Other colors…EXAMPLE


Part list 1Tr

ans

Red

Tran

spar

ent

With

one

hol

e

EXAMPLE


Step 30EXAMPLE


Step 31EXAMPLE


Step 32EXAMPLE


Step 33EXAMPLE


Step 34Transparent

Mount at this side the ‘axle-hole’

of the gray ‘beam-2 hole and axle-hole’

!!

EXAMPLE


Stone Trailer Truck

( trailer )


EXAMPLE


Step 35EXAMPLE


Step 36EXAMPLE


Step 37

Make sure that both turntables are EXACT parallel after mounting the chain

EXAMPLE


Step 38EXAMPLE


Stone Trailer Truck

( rolloader

crane )


EXAMPLE


Step 13

Step 14EXAMPLE


Step 15

Step 16EXAMPLE


Last step 17EXAMPLE


Step 26

Again, temporarily remove beam 7L

EXAMPLE

stone trailer truck...truck 6x4 ‘alien squidman’ with rolloader crane trailer (remote controlled...

Documents