System 100

NEWTON 114 ACRIFLEXElastic Fibre-Reinforced Liquid Waterproofing Membrane

DATA SHEET | MSDS | APPLICATION GUIDE | DoP N

EWTO

N S

YSTE

M 1

00 -

LIQ

UID

WAT

ERPR

OO

FIN

G M

EMBR

AN

ES

© Newton Waterproofing Systems (a trading name of John Newton & Co. Ltd.)

Newton House, 17-19 Sovereign Way, Tonbridge, Kent, TN9 1RHT: +44 (0)1732 360 095 W: www.newtonwaterproofing.co.uk E: info@newtonwaterproofing.co.uk

Rev 3.4 - 19 May 2017 PRODUCT CODE - 114

Page

1 o

f 5

®

INTRODUCTIONManufactured by Diasen S.R.L. of Sassoferrato, Italy, Newton 114 Acriflex is a two component fibre reinforced waterproofing liquid membrane based on cement, water based acrylic resin suitable for a great many applications such as the waterproofing of flat roofs, balconies, swimming pools, parking areas, and terraces. Newton 114 Acriflex provides a flexible and durable, multi- layer, reinforced, seamless waterproofing membrane and can be used below a drainage membrane such as Newton 407 DeckDrain Newton 408 Deckdrain or 420 Reservoir or with a variety of direct finishes.

SUITABLE SUBSTRATES Correctly prepared substrates of:

• Concrete

• Screed

KEY BENEFITS• Excellent waterproofing capabilities

• Suitable for use below drainage and green roof membranes such as Newton 407 DeckDrain and Newton 420 Reservoir

• Easy and quick application

• High tensile strength & elasticity

• Fibre reinforced - no further reinforcement needed

• Tiles can be adhered directly over 114 Acriflex using a suitable adhesive

• Can be applied at temperatures as low as +5°C

• Solvent-free

• Very high loading capability <13 N/mm2

TYPICAL APPLICATIONS• Waterproofing of concrete decks, balconies, terraces

and flat roofs

• Waterproofing and wet rooms - Tiling can be directly applied to Newton 114 Acriflex

APPLICATION

PACKAGING COVERAGE

A+B Components, within two containers

2.5 kg/m2 in two coatsMembrane thickness - 2.0mm 25 kg

PROPERTIESH - Hardness and Durability; E - Elasticity and Flexibility; V - Vapour Resistivity; C - Curing and Drying

H EVC

• Flush pointed mortar

• Smoothing coat of Newton 908 LiquaBond

NEWTON 114 ACRIFLEXElastic Fibre-Reinforced Liquid Waterproofing Membrane

© Newton Waterproofing Systems (a trading name of John Newton & Co. Ltd.)

Newton House, 17-19 Sovereign Way, Tonbridge, Kent, TN9 1RHT: +44 (0)1732 360 095 W: www.newtonwaterproofing.co.uk E: info@newtonwaterproofing.co.uk

NEW

TON

SYS

TEM

100

- L

IQU

ID W

ATER

PRO

OFI

NG

MEM

BRA

NES

Page

2 o

f 5

1Compression testing was conducted by an independent laboratory. Test report is available on request.

TECHNICAL DATA

Features Result UnitsForm Part A liquid + Part B powderColour GreyDensity/Specific Gravity 1.1Packaging – Bucket 25 kgShelf life 12 MonthsPot life 24 – 30 HoursApplication rate in two coats 2.5 kg/m2

Application method Brush, roller, or squeegeeApplication temperature +5 to +35 ºCService temperature -15 to +40 ºCOdour NoneVOC Does not contain solvents

Curing – 1 litre/m2 5ºC 10ºC 15ºC 20ºC 25ºC Units

Ready for next coat 20 15 8 4 3 Hours

To not be adulterated by rain 20 15 8 4 3 HoursReady for temporary foot traffic / protection boards 20 15 8 4 3 Hours

Ready for flood/hosepipe test 72 72 72 60 50 Hours

Fully cured 72 72 72 60 50 Days

Cured Performance Result Units Test Method

Colour GreyMembrane thickness 2.27 mmAdhesion to concrete – Direct traction 0.536 MPa UNI EN ISO 1542Adhesion to primer – Newton 110 WATstop >7 MPa UNI EN ISO 4626Adhesion to primer – Newton 102 Nuseal-LM 1 – 3 MPa UNI EN ISO 4626Tensile strength 2.32 MPa ISO EN 527-3Elongation at break 361 % ISO EN 527-3Crack bridging ability 3 mm ASTM C1305Recovery after 50% deformation 361 97% Manufacturers testLoading capability >13 MPa See note 1 belowPunching resistance 68.7 N ASTM D4833Water vapour diffusion resistance – SD value 6.16 m Calculation from µ

valueWater vapour diffusion resistance – 2mm film - µ value

2463 µ UNI ISO 7783

Water vapour diffusion resistance – 2mm film 30.8 MNs/g Calculation from µ value

Water tightness 9.5 bar UNI EN 12390-8Reaction to fire classification Euroclass E B – s2, d0 EN 13501-1UV resistance 5.0 Years UNI EN ISO 11507

NEWTON 114 ACRIFLEXElastic Fibre-Reinforced Liquid Waterproofing Membrane

© Newton Waterproofing Systems (a trading name of John Newton & Co. Ltd.)

Newton House, 17-19 Sovereign Way, Tonbridge, Kent, TN9 1RHT: +44 (0)1732 360 095 W: www.newtonwaterproofing.co.uk E: info@newtonwaterproofing.co.uk

NEW

TON

SYS

TEM

100

- L

IQU

ID W

ATER

PRO

OFI

NG

MEM

BRA

NES

Page

3 o

f 5

SUITABLE SURFACESWaterproofing of:• Walls - Positive pressure• Deck - Positive pressure

APPLICATION GUIDESApplication Guides that confirm the preparation of the substrate and the application of the product are available for the following applications:• AG114-1 - Application to concrete decks, car parks,

balconies, terraces and flat roofs• AG114-2 - Application to wet rooms • Application Guides and MSDS can be found under the

System 100 section of our website or this hyperlink: Newton 114 Acriflex

METHOD OF APPLICATION• Squeegee• Roller• Brush (small areas and detailing)

SPECIALIST TOOLS REQUIRED• Spiked roller to ensure captured air is removed and to

improve the surface finish

• Spiked shoes to allow traverse without damage to the product and to improve the surface finish

SPECIFICATIONJohn Newton & Company Ltd are in partnership with RIBA NBS who publish details of our products and systems within their specification clause library to allow Architects ease of specification through their NBS Plus interface. NBS clauses can be accessed via the technical resources area of the web site where a live NBS Feed is available at NBS Plus Live Feed

Our website has drawings available for download in Technical Drawings. A selection are also available via FastrackCAD, as well as a range of BIM objects on the NBS National BIM Library

TYPICAL DETAIL - WATERPROOFING OF DECK ABOVE BASEMENT

NEWTON 114 ACRIFLEXElastic Fibre-Reinforced Liquid Waterproofing Membrane

© Newton Waterproofing Systems (a trading name of John Newton & Co. Ltd.)

Newton House, 17-19 Sovereign Way, Tonbridge, Kent, TN9 1RHT: +44 (0)1732 360 095 W: www.newtonwaterproofing.co.uk E: info@newtonwaterproofing.co.uk

NEW

TON

SYS

TEM

100

- L

IQU

ID W

ATER

PRO

OFI

NG

MEM

BRA

NES

Page

4 o

f 5

LIMITATIONS• Do not apply prior to heavy rain - please see

information within the curing table on page 2

• Do not apply at temperatures lower than +5°C or higher than +35°C

• During the high summer, do not install when the deck is exposed to hot and direct sunlight. Apply the product during the cooler hours of the day

• Do not apply with a humidity level higher than 70%

• Always use the correct preparation and priming of the support substrate as directed within the appropriate Application Guide

PACKAGING25kg plastic bucket, each containing the 2 components (A+B) already measured, ready to be mixed.

Pallet: 48 buckets (1200 kg).

APPLICATION RATENewton 114 Acriflex is applied in two coats:

All surfacesNumber of coats = 2Thickness of each coat = 1 mmTotal thickness = 2 mmCoverage per coat = 1.25 kg/m²Total coverage = 2.5 kg/m²Coverage per 25kg container = 10 m²

ANCILLARY PRODUCTS• Newton 106 FlexProof - Purchase Code FP1, FP4.

Highly advanced single component elastomeric polymer for the waterproofing movement joints

• Newton 912-RT - Purchase Code 912-RT. Reinforcement Tape for reinforcing changes in direction and static joints

Further specification specific products such as primers, sealants and finishing coats are confirmed within the product Application Guides.

PROTECTION OF THE MEMBRANENewton 114 Acriflex is capable of resisting wear and weathering for up to 10-years, but we strongly recommend that the membrane be seen as an investment and is protected as soon as possible against possible damage. Protection methods include:

• Newton drainage membranes, Newton 407 & 408 DeckDrain, with paving or Intensive Green Roof over

• Newton 420 Reservoir drainage and water storage membrane with Extensive Green Roof over

• Ceramic Tiling adhered directly to the 114 Acriflex

• Newton 702 Floorgum Paint - UV stable foot traffic capable coating

• Newton 703 Floorgum Tyre - UV stable foot traffic capable coating

• Timber decking

• Paving

TRAINING AND COMPETENCY OF THE USERNewton 103-S should be installed by those with experience of structural waterproofing.

It is recommended that Newton 114 Acriflex and its ancillary products be installed by contractors trained by Newton Waterproofing Systems in the correct use and specification of the product.

LIFE EXPECTANCYWhen specified, installed and protected in accordance with the Data Sheet and Application Guides and only to those substrates confirmed within, Newton 114 Acriflex has a service life that can be equal to the design life of the structure.

Further information of the methods of protection of the membrane are confirmed below.

If the membrane is not protected it has a service life of 10-years, at which point the membrane will need to be inspected and may need replacing. The membrane will ‘yellow; due to the effects of UV light before 10-years, but the membrane will remain serviceable.

NEWTON 114 ACRIFLEXElastic Fibre-Reinforced Liquid Waterproofing Membrane

© Newton Waterproofing Systems (a trading name of John Newton & Co. Ltd.)

Newton House, 17-19 Sovereign Way, Tonbridge, Kent, TN9 1RHT: +44 (0)1732 360 095 W: www.newtonwaterproofing.co.uk E: info@newtonwaterproofing.co.uk

NEW

TON

SYS

TEM

100

- L

IQU

ID W

ATER

PRO

OFI

NG

MEM

BRA

NES

Page

5 o

f 5

CURINGFor curing/drying times please see Technical Data on page 2. Newton 114 Acriflex is a cement-based product and so requires curing. Accelerated drying must be avoided. If the conditions are hot, sunny and/or very windy the finished membrane must be protected from accelerated drying with polythene sheeting, damp hessian or similar.

In floor and deck applications, coloured sands or grit can be cast liberally onto the surface to provide effective curing, whilst also creating an abrasion and slip resistant finish.

Curing must commence within 10-15 minutes of the completed application of the coating.

Newton Waterproofing Systems reserve the right to update product literature at any time. Please always refer to our website for the latest versions.

COLOURGrey - Coloured UV stable protective finishes available.

CLEANINGThoroughly clean all tools and equipment with water after use.

STORAGEStore in dry conditions at temperatures between 5°C and 25°C with containers fully sealed. Do not expose to freezing conditions.

If these conditions are maintained and the productpackaging is unopened, a shelf life of up to 12months can be expected.

POT LIFE & FURTHER USENewton 114 Acriflex is a two-part product and a chemical curing reaction starts as soon as the two parts are mixed. Pot life is very good at 24 - 30 hours, but after this period the mixed product will be unworkable and will need to be safely discarded.

HEALTH & SAFETYUse appropriate PPE for the environment the system is installed within. Use products only as stated within this Data Sheet and the MSDS and Application Guides.

SPRAYING SPECIFICATIONNewton 114 Acriflex can be sprayed with an airless spray machine. For information on the machine and configuration, please contact our Training Department.