table of contents...• multi-purpose galvanized bracket supports various application solutions •...
TRANSCRIPT
1www.holdrite.com 1
TABLE OF CONTENTSCONTENT PAGE
Company Overview...............................................................................2
“Converting Makeshift Methods............................................................3 into Engineered Solutions”SM
“VIP Value-Added Services”..................................................................4
PEX Tubing Solutions......................................................................5-10
CPVC Tubing Solutions..................................................................11-13
Copper Tubing Solutions - Residential/Commercial......................14-16
Pre-Fab/Specialty Solutions..........................................................17-19
Overhead Support Solutions..........................................................20-23
Telescoping Support Solutions.......................................................24-26
Acoustical Solutions......................................................................27-30
Inserts, Isolators, Clamps...............................................................31-34
Water Heater and Equipment Supports.........................................35-37
“Quick Search by Application”........................................................38-44
Material Take-Off Sheet & Product Index......................................45-47
Distribution and Shipping....................................................................48
Hubbard Enterprises/HOLDRITE®
2560 Progress StreetVista, CA 92081(800) 321-0316
© 2009 Hubbard Enterprises/HOLDRITE. All rights reserved.Products shown may be protected by U.S. Patent or have Patents Pending.
2 (800) 321-0316 • Fax: (760) 744-05072
COMPANY OVERVIEWSince the introduction of the first HOLDRITE® Copper-bonded™ bracket over 27 years ago, Hubbard Enterprises/HOLDRITE® has become a leading manufacturer known for innovative products and services that help Mechanical and Plumbing Contractors reduce their installation costs, while ensuring consistent craftsmanship. By under-standing both the large project perspective and specific application requirements, HOLDRITE has developed solutions that assist in establishing a “shop standard” for both residential and commercial Contractors. Over the years, Contractors have made HOLDRITE the plumbing industry standard for “Converting Makeshift Meth-ods into Engineered Solutions”SM. HOLDRITE products have been installed into a wide variety of projects from single-family and multi-family housing to hotels/motels, healthcare, institutions, and many other market sectors.
The construction industry has seen fluctuating material costs and challenging market conditions, resulting in Contractors looking to reduce their overall installation costs to stay competitive and grow their market share. This has significantly influenced changes in material type preferences and installation methodologies. Hubbard En-terprises/HOLDRITE continues to listen to the Contractor, Wholesaler, and Engineer to develop innovative products that support Copper, PEX, CPVC tubing, and other material types. Additionally, HOLDRITE is an industry leader in such categories as noise and vibration isolation and water heater support.
HOLDRITE also offers value-added, No Cost Services to the Contractor, Wholesaler, and Engineer to assist with multiple stages in the project. VIP Services include specification and submittal assistance, 3-D product drawings, custom detail applica-tion pages, and material “take-off” assistance to help a Contractor or Wholesaler plan for product inventory levels.
As the plumbing industry continues to evolve, Hubbard Enterprises/HOLDRITE will also stay at the forefront of new trends that will make a significant impact to the Mechanical and Plumbing Contractor.
Innovative and proven products named as “Top Products” by Contractors and leading industry trade publications. Examples include:
HOLDRITE® Silencer™ System (pg. 27)
QUICK STAND™ Wall Mount Platform (pg. 36)
PEXRITE® System (pg. 5)
HOLDRITE Supports Canada
3www.holdrite.com
MAKESHIFTMETHODS
LAVATORY / SINK
WATER HEATER SUPPORT
VERTICAL
SHOWER HEAD
ENGINEEREDSOLUTIONS
3
ENGINEEREDSOLUTIONS
(800) 321-0316 • Fax: (760) 744-0507VIP SERVICES
CONTRACTOR SERVICES
VIP Estimating Cost Savings Analysis
COST SAVINGS
Application Holdrite Product(s)
“Installed Cost” Savings Examples Shown @ $40.00/Hr. Labor Rate)
Overhead Cast-In-Place Hanger 125-D $7.40 (Double Pipe Run)
Suspended Equipment Platform 40-SWHP-A $8.33Lavatory Sink (PEX-to-Copper Stub Out)
103-18/701 $1.86
Flush Valve Support 114-CO $1.18Overhead Med-Gas Trapeze EZ-1/250 $16.90
HOLDRITE APPLICATION SAVINGS EXAMPLES
LABOR COST CALCULATOR
4
• No Cost material “Take-Off” for your next job
• Performed by Estimators with over 20 years of plumbing experience
• Savings analysis based on material and installation costs resulting from using HOLDRITE® products
• Custom “Detailed Drawing” pages for each application in PDF or DWG CAD formats
• 3-D Product drawings available in 5 formats!
• Ideal for establishing “Shop Standards”
• Specification and Submittal assistance
Support and Alignment SolutionsPEX
• Minimizes Concealed Joints• Reduces In-Wall Fittings• Flame-Free Environment at Stub-Out Location• Compatible with All PEX Manufacturers
PEXRITE®
APPLICATIONSOLUTIONS
PEX SOLUTIONS 5www.holdrite.com
6 (800) 321-0316 • Fax: (760) 744-0507
COPPERPEXRITE® LOCK-N-LOADTM #701
Designed for PEX, Copper and CPVC
Tightens by Hand - No toolsor hardware required
Eliminates Soldering
Secure fit prevents forward and backward movement
PEXPEXRITE® TURN-OUT #704
Eliminates In-Wall Fittings, Concealed Joints and Soldering
Installs Directly to Stud
Provides 360° Turning Radiusin PEXRITE® Brackets
Reduces noise and vibration
2
4
65
3
1PEXRITE TURN-OUT #704 INSTALLATION INSTRUCTIONS
Install PEXRITE® bracket to studs
Position 704 until bracket fits into groove, then rotate into place
Bend tube forward and snap into 704
Insert PEX tube at 45º angle and set stub-out length
No concealed joint in the wall
Insert 704 into bracket from the front
6
4
2
3
1
Push and twist back nut by hand until tight
PEXRITE LOCK-N-LOAD #701 INSTALLATION INSTRUCTIONSInstall PEXRITE® bracket to studs
Lock 701 into bracket with thumbs
Insert 701 into bracket from front
Load tubing through 701 from back
Secures stub-out with no solder5
#103-18
PEXRITE®
Pick YourStub-OutMethod
PEX SOLUTIONS
7www.holdrite.com PEX SOLUTIONS
Model# Bracket Size For Pipe Size(s) Box Qty103-18 20” 1/2”, 3/4 “, 1” CTS 50103-26 26” 1/2”, 3/4 “, 1” CTS 50
• Versatile bracket ideal for sink, lavatory & water closet plumbing solutions• Galvanized steel bracket with 1-3/8” keyed holes on 2” centers• Integrates with PEXRITE #701 & #704 with patented connection and other HOLDRITE inserts
HOLDRITE – #103-18, #103-26
Model# Size For Pipe Size(s) Box Qty704 3-1/4” X 5-1/2” 3/8” - 1/2” CTS 100
• PEX turnout integrates with #103, #110-R, and #709 series brackets• Install directly to stud • Reduces in-wall fittings and concealed joints • Provides 360-degree turning radius• Torch-free environment at stub-out location • Eliminates the need for costly copper bullets • Compatible with all PEX tubing manufacturers
PEXRITE – #704
• Stub-out clamp ideal for 1/2” CTS PEX-to-Copper transition at lavatory/sink or toilet• Integrates with #103, #110-R, and #709 series brackets• Compatible with PEX, Copper, and CPVC• Tightens by hand - No tools required• Eliminates soldering• Secure fit prevents forward and backward movement
HOLDRITE LOCK-N-LOAD™ – #701
Model# For Pipe Size(s) Kit Qty 6PAK Qty Case Qty704-PR 3/8” - 1/2” CTS 1 6 36
• PEX stub-out kit for lavatory/sink or toilet• Includes (1) #103-18 galvanized bracket and (2) #704 turn-outs• Installation photos on packaging. Great for Counter Sales.• Available in Contractor kit, 6PAK, and Wholesaler point-of-purchase (POP) display
PEXRITE – #704-PR KIT
• PEX stub-out kit for lavatory/sink or toilet• Includes (1) #103-18 galvanized bracket, (2) #701 stub-out clamps, and (2) 1/2” CTS 3.5” x 8” Copper Ells• Installation photos on packaging. Great for Counter Sales.• Available in Contractor kit, 6PAK, and Wholesaler point-of-purchase display• Confirm compatibility of Copper Ells with PEX tubing manufacturer
PEXRITE – #701-PR KIT
Model# Size For Pipe Size(s) Box Qty701 2” x 1-3/4” 1/2” CTS 50
Model# For Pipe Size(s) Kit Qty 6PAK Qty Case Qty701-PR 1/2” CTS 1 6 36
NEW
NEW
NEW
8 (800) 321-0316 • Fax: (760) 744-0507
HOLDRITE – #110-R
Model# Bracket Size For Pipe Size(s) Box Qty110-R 2-1/8” X 1-7/8” 1/2”, 3/4 “, 1” CTS 50
• Ideal for lavatory/island sink• Galvanized steel bracket with “key design” allows integration with various HOLDRITE inserts, #701, and #704 • Allows for easy Pre-fabrication at the shop or in the field • Install directly to the waste/vent pipe prior to studs being erected• Supports 4” and 8” centers• Self-locking stainless steel band & isolating felt included
• Stub-out clamp and Copper Ell in bulk packaging• #701-0536P includes 1/2” CTS #701 stub-out clamp and 1/2” CTS 3.5” x 6” Copper Ell• #701-0538P includes 1/2” CTS #701 stub-out clamp and 1/2” CTS 3.5” x 8” Copper Ell
PEXRITE – #701-0536P, #701-0538P
Model# Copper Ell Size For Pipe Size(s) Box Qty
701-0536P 1/2” CTS 3.5” x 6” 1/2” CTS PEX tubing 25 Clamps/25 Copper Ells
701-0538P 1/2” CTS 3.5” x 8” 1/2” CTS PEX tubing 25 Clamps/25 Copper Ells
Model# Size For Pipe Size(s) Box Qty103-18-701 20” Bracket 1/2” CTS 50 Brackets/100 Clamps103-26-701 26” Bracket 1/2” CTS 50 Brackets/100 Clamps
• Ideal for lavatory/sink and toilet• Sold in bulk packaging• #103-18-701 includes 20” brackets and 1/2” CTS #701 stub-out clamps• #103-26-701 includes 26” brackets and 1/2” CTS #701 stub-out clamps
HOLDRITE – #103-18-701, #103-26-701
Model# Bracket Size For Pipe Size(s) Box Qty721 2-3/4” X 3-3/8” 3/8” - 1” CTS 50
• Attaches to framing or directly to HOLDRITE Stout Bracket®
• Ideal for lavatory or water closet support• Galvanized steel bracket with 1-3/8” keyed hole• Allows for 360-degree orientation when used with #701/#704
HOLDRITE – #721
PEX SOLUTIONS
HOLDRITE – #709, #709-L, #709-EXT • Ideal for water closets and hose bibs• Galvanized steel brackets with 1-3/8” keyed holes • Allows for 360-degree orientation when used with #701/#704 • #709 provides 4-1/4” and 6-1/4” center line heights • #709-L provides 1-3/8” and 3-3/8” center line off stud/plate (3” & 5” off floor)• #709-EXT provides 2”, 4”, 6”, and 8” center line off plate or floor
Model# Bracket Size For Pipe Size(s) Box Qty709 7-1/2” X 2” 3/8” - 1” CTS 50
709-L 4-1/4” X 3-1/4” X 2” 3/8” - 1” CTS 50709-EXT 9” X 2-1/8” X 2” 3/8” - 1” CTS 50
#709
#709-L
#709-EXT
NEW
NEW
9www.holdrite.com PEX SOLUTIONS
HOLDRITE STOUT BRACKET® – #SB1S, #SB2S
Model# Bracket Size For Pipe Size(s) Box QtySB1S 10” to 18” Various 50SB2S 13” to 25” Various 50
• Multi-purpose galvanized bracket supports various application solutions • Ideal for lavatory, shower, water closet, vertical, horizontal and much more• Telescoping design supports PEX, Copper, CPVC, and other types of piping • Numerous components integrate into multiple sides of the Stout Bracket • Provides superior strength and versatility• Includes four screws
• Ideal for lavatory, water closet, and tub spout support• Extruded holes provide additional soldering surface• Ideal for PEX-to-Copper bullets• Copper-bonded steel bracket • #101-18-R provides 5/8” holes on 2” centers • #101-26-R provides 5/8” holes on 2” centers and two 7/8” holes on 8” centers
HOLDRITE – #101-18-R, #101-26-R
Model# Bracket Size For Pipe Size(s) Box Qty101-18-R 20” 1/2” CTS 25101-26-R 26” 1/2” CTS 25
• Single run PEXRITE POP-UP for RADIANT HEATING or other in-slab PEX tubing support (1-1/2” - 3-1/2” thick slab)• Unique design allows for side-entry of tubing• Mounts to form decking or slab-on-grade with rebar• Manifold capability with interlocking feet
PEXRITE POP-UP™ – #706
Model# Size For Pipe Size(s) Box Qty706 5-1/3” x 5” x 2-1/2” 3/8” & 1/2” CTS 50
• Single run PEXRITE POP-UP for in-slab flexible tubing support• Manifold capability with interlocking feet• Compatible with PEX, soft Copper, flexible conduit• #707 design allows for side-entry of tubing• #707-E design allows for easy zip tie installation• Mounts to form decking or slab-on-grade with rebar
PEXRITE POP-UP™ – #707, #707-E
Model# Size For Pipe Size(s) Box Qty707 8-1/2” X 8-5/8” X 1-1/4” 3/8” thru 7/8” O.D. 25
707-E 8-1/2” X 8-5/8” X 1-1/4” 3/8” thru 1-1/2” O.D. 25
#707
#707-E
• Turn-out support for 3/8” and 1/2” CTS PEX tubing• Ideal for lavatory/sink & toilet stub-out and overhead 90° turn• Mount to block of wood or other flat surface• Unique design allows for side-entry of tubing
PEXRITE – #705
Model# Size For Pipe Size(s) Box Qty705 5-1/3” x 4-1/8” x 2-1/2” 3/8” & 1/2” CTS 50
NEW
NEW
NEW
(800) 321-0316 • Fax: (760) 744-050710 PEX SOLUTIONS
• Double run PEXRITE POP-UP for in-slab flexible tubing support• Manifold capability with interlocking feet• Compatible with PEX, soft Copper, flexible conduit• Unique design allows for side-entry of tubing• Mounts to form decking or slab-on-grade with rebar
PEXRITE POP-UP™ – #708
Model# Size For Pipe Size(s) Box Qty708 10-1/2” X 11-1/8” X 2-1/2” 3/8” thru 1-1/8” O.D. 15
Model# Hole Needed For Pipe Size(s) Box Qty104 1-3/8” Diameter 1/2” CTS 100105 1-3/8” Diameter 3/4” CTS 100106 1-3/8” Diameter 1” CTS 100
• Ideal for pipe support with HOLDRITE #121 & #103 series brackets• Compatible with PEX, Copper, and CPVC tubing
HOLDRITE INSERTS – #104 - #106
• Ideal for metal studs with PEX, Copper, and CPVC tubing• Integrates with most HOLDRITE galvanized brackets • Flame-rated per UL 94 V-2 standards• Fits in 1-3/8” or 1-11/32” holes
HOLDRITE INSERTS – #404-R - #406-R
Model# Hole Needed For Pipe Size(s) Box Qty404-R 1-3/8” Diameter 1/2” CTS 100405-R 1-3/8” Diameter 3/4” CTS 100406-R 1-3/8” Diameter 1” CTS 100
• Double run PEXRITE POP-UP for in-slab PEX tubing, flexible conduit, & rigid conduit 90s.• Unique design allows for easy zip tie installation• Mounts to form decking or slab-on-grade with rebar• Manifold capability with interlocking feet
PEXRITE POP-UP™ – #708-E
Model# Size For Pipe Size(s) Box Qty708-E 10-1/2” x 11-1/6” x 3-1/4” 3/8” thru 2-1/2” IPS 15
• Ideal for metal thru-stud applications and integrates with HOLDRITE #121 and #125 series brackets• Positioning and dissimilar metal isolation for Copper, CPVC, and PEX tubing• Meets UL 94 HB requirements
HOLDRITE ISOLATORS – #424 - #426
Model# Hole Size Pipe Size Bag Qty
MasterCarton Qty
424 1-11/32” & 1-3/8” 1/2” CTS 50 250425 1-11/32” & 1-3/8” 3/4” CTS 50 250426 1-11/32” & 1-3/8” 1” CTS 50 250
NEW
NEW
11
Support and Alignment SolutionsCPVC
• LOCKRITE™ & HOLDRITE® Systems for CPVC Pipe Support• Inserts are Lockable and Glueable• Grooved Inserts Create Stronger Glue Joint• Compatible with CPVC Tubing and Cements • Some Application Solutions Require No Glue
LOCKRITE™/HOLDRITE® APPLICATIONSOLUTIONS
CPVC SOLUTIONSwww.holdrite.com
12 (800) 321-0316 • Fax: (760) 744-0507CPVC SOLUTIONS
Model# Bracket Size For Pipe Size(s) Box Qty609-N-6 6-3/4” X 5” 1/2”, 3/4” CTS 50
• Ideal for water closet or hose bib stub-outs & functions as a nail plate• Use in conjunction with #604 and #605 glueable inserts• 16-gage galvanized steel bracket supports various heights from 2-1/4” – 6”
LOCKRITE – #609-N-6
HOLDRITE STOUT BRACKET® –#SB1S, #SB2S, #211, #212• Multi-purpose galvanized bracket supports various application solutions • Ideal for lavatory, shower, water closet, vertical, horizontal and much more• Telescoping design supports CPVC, PEX, Copper and other types of piping • Numerous components integrate into multiple sides of the Stout Bracket • Includes four screws• CPVC tubing glues directly to clamp• Meets UL 94 V-0 requirements
Model# Size For Pipe Size(s) Box QtySB1S 10” to 18” Various 50SB2S 13” to 25” Various 50211 1” X 1-1/4” 1/2” CTS 100212 1” X 1-3/8” 3/4” CTS 100
• Versatile bracket ideal for sink, lavatory & water closet plumbing solutions• Galvanized steel bracket with 1-3/8” keyed holes on 2” centers• Integrates with HOLDRITE #701 and other HOLDRITE inserts
HOLDRITE – #103-18, #103-26
Model# Bracket Size For Pipe Size(s) Box Qty103-18 20” 1/2”, 3/4”, 1” CTS 50103-26 26” 1/2”, 3/4”, 1” CTS 50
Model# Size For Pipe Size(s) Box Qty701 2” x 1-3/4” 1/2” CTS 50
• Stub-out clamp ideal for lavatory/sink and toilet applications• Integrates with #103, #110-R, and #709 series brackets• Compatible with CPVC, PEX, and Copper• Tightens by hand - No tools required• Eliminates glue at the stub-out application • Secure fit prevents forward and backward movement
HOLDRITE LOCK-N-LOAD™ – #701
• Ideal for lavatory, sink, and water closet stub-out support• Galvanized steel bracket provides proper pipe positioning and alignment• Inserts are lockable and glueable• Inserts are grooved, creating a stronger glue joint
LOCKRITE – #601-20, #601-26, #604, #605
Model# Size For Pipe Size(s) Box Qty601-20 20” 1/2”, 3/4” CTS 50601-26 26” 1/2”, 3/4” CTS 50
604 1” Diameter 1/2” CTS 100605 1” Diameter 3/4” CTS 100
#604
#601-20
NEW
#SB1S
#211
13www.holdrite.com
Model# Clamp Size For Pipe Size(s) Bag Qty221 1-7/8” X 1-1/2” 1/2” CTS 100222 1-7/8” X 1-3/4” 3/4” CTS 100223 2-3/8” X 2-1/8” 1” CTS 50224 2-7/8” X 2-3/8” 1-1/4” CTS 25225 2-7/8” X 2-3/4” 1-1/2” CTS 25226 3-3/8” X 3-1/8” 2” CTS 25231 2” X 7/8” 1/2” CTS 100232 2-3/8” X 2-1/8” 3/4” CTS 100233 2-3/4” X 2-1/2” 1” CTS 50234 2-3/4” X 1-3/4” 1-1/4” CTS 25
235 3-1/8” X 2” 1-1/2” CTS 25236 3-1/2” X 2-1/2” 2” CTS 25
• Ideal for CPVC, PEX, and Copper tubing• #221 - #226 are suspension clamps• #231 - #236 are standard clamps
HOLDRITE CLAMPS – #221 - #226, #231 - #236
CPVC SOLUTIONS
HOLDRITE STOUT BRACKET® – #SB3, #SB4• Ideal for shower head, tub spout, vertical mid-span, and much more• Supports both 2-eared and 3-eared 90s• Telescoping design supports CPVC, PEX, and Copper tubing• Integrates with several HOLDRITE clamps and other industry standard components
Model# Bracket Size For Pipe Size(s) Box QtySB3 10-1/4” to 17-1/2” Various 50SB4 15-1/4” to 25-1/2” Various 50
NEW
• Metal thru-stud applications & integrates with HOLDRITE #121/#125 brackets• Positioning and dissimilar metal isolation for CPVC, PEX, and Copper tubing• #424-#426 meets UL 94 HB requirements• #424-C - #426-C are glueable with CPVC tubing
HOLDRITE ISOLATORS – #424 - #426, #424-C - #426-C
Model# Hole Size Pipe Size Bag Qty
MasterCarton Qty
424 1-11/32” & 1-3/8” 1/2” CTS 50 250425 1-11/32” & 1-3/8” 3/4” CTS 50 250426 1-11/32” & 1-3/8” 1” CTS 50 250
424-C 1-11/32” & 1-3/8” 1/2” CTS 50 250425-C 1-11/32” & 1-3/8” 3/4” CTS 50 250426-C 1-11/32” & 1-3/8” 1” CTS 50 250
NEW
#221
#231
Model# Size For Pipe Size(s) Box Qty170 18” Bracket Various 50
170-26 26” Bracket Various 50251 2-3/8” x 2-3/4” 1/2”, 3/4”, 1” CTS 50
170-251 18” Bracket 1/2”, 3/4”, 1” CTS 50 Brackets/100 Clamps170-26-251 26” Bracket 1/2”, 3/4”, 1” CTS 50 Brackets/100 Clamps
• Low cost pipe support solution • No tools or hardware required for clamp• #170-251, #170-26-251 sold in bulk packaging
HOLDRITE Rapid System™ – #170, #170-26, #251, #170-251, #170-26-251
#170
#251
NEW
14
Support and Alignment Solutions
COPPER-BONDED™RESIDENTIAL/COMMERCIAL
• Unique Copper Bonding Process• Heat the Pipe Not the Bracket• Solutions for Various Applications• Support 1/2” to 1-1/4” CTS• Designed for Stud Bays up to 24”
HOLDRITE®
APPLICATIONSOLUTIONS
COPPER-BONDEDRESIDENTIAL/COMMERCIAL SOLUTIONS (800) 321-0316 • Fax: (760) 744-0507
www.holdrite.com 15
HOLDRITE – #101-18, #101-26, #101-18-R, #101-26-R
Model# Size For Pipe Size(s) Box Qty101-18 20” 1/2” CTS 50101-26 26” 1/2” CTS 50
101-18-R 20” 1/2” CTS 25101-26-R 26” 1/2”, 3/4” CTS 25
• Ideal for lavatory and water closet• Ideal for copper bullets requiring a more rigid installation• Copper-bonded, steel bracket • #101-18-R & #101-26-R extruded holes provide additional soldering surface• 5/8” holes on 2” centers (#101-26-R also has two 7/8” holes on 8” centers)
• Ideal for water heater and relief line applications• Copper-bonded, heavy-gage steel bracket• Alternating 7/8” and 1-1/8” holes on 4” centers
HOLDRITE – #102-18, #102-26
Model# Size For Pipe Size(s) Box Qty102-18 20” 3/4”, 1” CTS 50102-26 26” 3/4”, 1” CTS 50
• Ideal for multiple applications such as lavatory, water closet and water heater• Rolled edges for extra strength and extruded holes for additional soldering surface• Copper-bonded steel bracket • Holes on 2” centers for 1/2” tubing and holes on 4” centers for 3/4” & 1” tubing
HOLDRITE – #108-20, #108-26
Model# Size For Pipe Size(s) Box Qty108-20 20” 1/2”, 3/4”, 1” CTS 50108-26 26” 1/2”, 3/4”, 1”, CTS 50
COPPER-BONDEDRESIDENTIAL/COMMERCIAL
SOLUTIONS
• Ideal for multiple applications such as lavatory, water closet and water heater• Copper-bonded, heavy-gage steel bracket• Holes on 2” centers for 1/2” tubing and holes on 4” centers for 3/4” & 1” tubing• #107-26 also has two holes for 1-1/4” tubing on 8” centers
HOLDRITE – #107-18, #107-26
Model# Size For Pipe Size(s) Box Qty107-18 20” 1/2”, 3/4”, 1” CTS 50107-26 26” 1/2”, 3/4”, 1”, 1-1/4” CTS 50
Model# Size For Pipe Size(s) Box Qty100-18 20” 1/2” CTS 100
• Ideal for lavatory/sink or water closet• Unique design and manufacturing process for low cost bracket• Copper-bonded, steel bracket• 5/8” holes on 2” centers
HOLDRITE – #100-18NEW
NEW
(800) 321-0316 • Fax: (760) 744-050716
HOLDRITE – #170-C, #170, #170-S
Model# Size For Pipe Size(s) Box Qty170-C 18” X 5/8” Various 50170 18” X 5/8” Various 50
170-S 18” X 5/8” Various 50
• Ideal for multiple applications • Supports tubing in vertical and horizontal positions• #170-C is a Copper-bonded, steel bracket• #170-S is galvanized steel bracket with (2) screws#170-C
#170
• Ideal for water closet applications and also functions as a nail plate • Copper-bonded, heavy-gage steel bracket• Supports 1/2” stub-outs at various heights from 2-1/4” – 6” and 3/4” at 3-1/2” height
HOLDRITE – #109-N-6
Model# Size For Pipe Size(s) Box Qty109-N-6 6-1/2” 1/2”, 3/4” CTS 50
Model# Size For Pipe Size(s) Box Qty109-A-9 9-1/2” 1/2” CTS 50
• Ideal for water closet applications• Copper-bonded, heavy-gage steel L-bracket • Six 5/8” holes at 2-3/4”, 4-1/2”, 6”, 7”, 8” and 9” • Most holes are extruded for additional strength
HOLDRITE – #109-A-9
COPPER-BONDEDRESIDENTIAL/COMMERCIAL SOLUTIONS
• #140 is ideal for lavatory, water closet and water heater applications• Ideal for tubing that is capped prior to soldering onto bracket • #141 is ideal for tub spout and shower diverter installations with split ends for horizontal and vertical mounting adding extra versatility• Extruded notches for 1/2” tubing on 1” centers and 3/4” tubing on 4” centers
HOLDRITE – #140, #141
Model# Size For Pipe Size(s) Box Qty140 20” 1/2”, 3/4” CTS 50141 20” 1/2”, 3/4” CTS 50
• Ideal for multiple applications such as lavatory, water closet, & water heater• 5/8” and 7/8” holes on 4” centers • Copper-bonded, heavy-gage steel bracket
HOLDRITE – #150-20, #150-26
Model# Size For Pipe Size(s) Box Qty150-20 20” 1/2”, 3/4” CTS 50150-26 26” 1/2”, 3/4” CTS 50
• #101-F is ideal for Copper tubing penetrating through the floor; 5/8” extruded hole• #130-#132 is ideal for lavatory/sink, water closet, water heater, & others; Solid Copper clip for support of 1/2”, 3/4”, and 1” tubing
HOLDRITE – #101-F, #130 - #132
Model# Size For Pipe Size(s) Box Qty101-F 3” X 1-1/4” 1/2” CTS 50130 2-1/4” X 2” 1/2” CTS 100131 2-1/4” X 2-3/8” 3/4” CTS 100132 2-1/4” X 2-5/8” 1” CTS 100#130
#101-F
#141
#140
17PRE-FAB/SPECIALTY
Support and Alignment SolutionsPRE-FAB/SPECIALTY
• Unique Copper Bonding Process• Heat the Pipe not the Bracket• Allows Installation of Rough-In Prior to Studs Being Erected• Horizontal and Vertical Solutions• Ideal System for the Pre-fabrication Shop• Rigid, Quality and Professional Installation
HOLDRITE®
APPLICATIONSOLUTIONS
www.holdrite.com
18 (800) 321-0316 • Fax: (760) 744-0507PRE-FAB/SPECIALTY
Model# Size For Pipe Size(s) Box Qty110-S-1/2 9-1/4” X 2-1/2” 1/2” CTS 50
•Idealforlavatoryandsink•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Copper-bonded,heavy-gagesteelbracket•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded•For1/2”Coppertubingon4”,6”and8”centers
HOLDRITE – #110-S-1/2
•Idealforlavatory/sinkstuboutsorverticalmid-spansupport•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Copper-bonded,heavy-gagesteelbracket•#118-T-6Supports1/2”tubingon4”and8”centersand3/4”tubingon6”centers•#118-T-8Supports1/2”tubingon4”and6”centersand3/4”tubingon8”centers•Fitswithina2-1/2”studwall•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded
HOLDRITE – #118-T-6, #118-T-8
Model# Size For Pipe Size(s) Box Qty118-T-6 9-1/8”X1-3/4”X1-1/2” 1/2”,3/4”CTS 50118-T-8 9-1/8”X1-3/4”X1-1/2” 1/2”,3/4”CTS 50
HOLDRITE – #111-S•Idealforverticalorhorizontalinstallationsandfitsin3-1/2”orwiderwall•Copper-bonded,steelbracketmountsdirectlytowaste/ventpipe•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded•Supports1/2”tubingon4”,6”,8”centersand3/4”tubingon4”and8”centers
Model# Size For Pipe Size(s) Box Qty111-S 9-1/2” X 1-1/2” 1/2”,3/4”CTS 50
•Multiplehorizontal/verticalmountingapplications•Easypre-fabricationattheshoporonthejobsite•Galvanizedsteelbracketmountsdirectlytothewaste/ventpipeprior tostudsbeingerected•Supports1/2”to2”tubingandcomeswithself-lockingstainlesssteel band,metalstraps,screwsandself-adhesiveisolatingfeltstrip
HOLDRITE – #115, #115-C
Model# Size For Pipe Size(s) Box Qty115 7-1/2” X 2” 1/2”-2”CTS/IPS 25
115-C 7-1/2” X 2” 1/2”-2”CTS/IPS 25#115-C
#115
•IdealforNoHubDWVjointsinexcessivepressuresituations•PreventsseparationofNoHubpipeandfittingsatchangeofdirection•Steelbandwithstainlesssteelclamps•#117-3D-#117-8D(SupplementalKits)foraddeddiagonalsupport
HOLDRITE – #117-3 - 117-8, #117-3D - #117-8D
Model# Size For Pipe Size(s) Box Qty117-3 OutsideBendSupportKit 2”-3”IPS 6117-4 OutsideBendSupportKit 4”IPS 6117-6 OutsideBendSupportKit 6”IPS 6117-8 OutsideBendSupportKit 8”IPS 6117-3D DiagonalSupportKit 2”-3”IPS 6117-4D DiagonalSupportKit 4”IPS 6117-6D DiagonalSupportKit 6”IPS 6117-8D DiagonalSupportKit 8”IPS 6
#117-4
#117-4D
19www.holdrite.com
•Idealforlavatory/sinkstuboutsorverticalmid-spansupport•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Copper-bonded,heavy-gagesteelbracket•#118-T-6Supports1/2”tubingon4”and8”centersand3/4”tubingon6”centers•#118-T-8Supports1/2”tubingon4”and6”centersand3/4”tubingon8”centers•Fitswithina2-1/2”studwall•Self-lockingstainlesssteelbandandself-adhesiveisolatingfeltincluded
PRE-FAB/SPECIALTY
Model# Size For Pipe Size(s) Box Qty114-C 23-1/4”X2-1/2” 1” CTS 6
114-CO 23-1/4”X2-1/2” 1” CTS 6114-CR 23-1/4”X2-1/2” 1” CTS 6
•For1”flushvalvesupportonwallhungtoiletcarriers•Copper-bonded,heavy-gagesteelbracketsmountdirectlyto4-bolttoilet carrierandpositionflushvalveatheightof11-1/2”abovetoilet•Allowsforrough-inpriortoframingbeingerected•4-1/2”offsetcenterlinerough-inwith#114-Cand#114-CR•#114-COprovides4-3/4”offsetrough-in(rightorlefthand)•#114-CRallowsforsupportofpre-cappedstubout
HOLDRITE – #114-C, #114-CO, #114-CR
#114-C
#114-CO
#114-CR
Model# Size For Pipe Size(s) Box Qty114-C-EXT 27” X 1” N/A 6
•Idealforwaterclosetcarrierswhereextendedrough-inheightisneeded•Copper-bonded,heavy-gagesteelbracketsmountdirectlyto4-bolt closetcarrier•Addsanadditional8-1/2”to24-1/2”heighttocarrierbracket (includeshardware)•CompatiblewithHOLDRITE#114seriesbrackets
HOLDRITE – #114-C-EXT
•Idealforhorizontalapplicationssuchasplumbingchasewalls•Easypre-fabricationattheshoporonthejobsite•Mountstowaste/ventpipeorbuildingstructurepriortostuds beingerected•Copper-bonded,heavy-gagesteelbracket•Supports1/2”to3”tubingwitha250-poundloadcapacity•Comeswithself-lockingstainlesssteelbandandisolating feltpad
HOLDRITE – #V-2
Model# Size For Pipe Size(s) Box QtyV-2 4-1/2” X 4-1/2” 1/2”-3”CTS 25
•Idealforverticalsingleruns•Installdirectlytothewaste/ventpipeorbuildingstructurepriortostuds beingerected•Galvanizedsteelbracket•Useinconjunctionwith#100seriesinsertsϬ/#1005steelbands•Unique“U”shapesupportfor1/2”,3/4”,and1”tubing
HOLDRITE – #121
Model# Size For Pipe Size(s) Box Qty121 2” X 1-1/2” 1/2”,3/4”,1”CTS 25
Model# Size For Pipe Size(s) Box Qty110-R 10”X2-3/4” 1/2”,3/4”,1”CTS 50
•Idealforlavatoryandsink•Easypre-fabricationattheshoporonthejobsite•Installdirectlytothewaste/ventpipepriortostudsbeingerected•Galvanizedsteelbracketwithkeydesignallowseasyintegrationfor #100series,#400seriesand#260seriesinserts•Supportson4”and8”centers•Self-lockingstainlesssteelband&self-adhesiveisolatingfeltincluded
HOLDRITE – #110-R
20
Support and Alignment SolutionsOVERHEAD
• Overhead Pipe Support for Copper, PEX, CPVC, and others • High & Tight Runs, Single & Multiple Runs• Versatility with Cast-In-Place Concrete Slabs, All-Thread Rod, and Direct to Ceiling
HOLDRITE®
APPLICATIONSOLUTIONS
OVERHEAD SOLUTIONS (800) 321-0316 •Fax: (760) 744-0507
Flame Rated = UL 94 V-2
Smoke & Flame Rated = ASTM E84 25/50 & UL 94 V-0
21www.holdrite.com 21
OVERHEAD HOLDRITE EZ-STRUT™ – #EZ-1, #EZ-2
Model# Size For Pipe Size(s) Box QtyEZ-1 12”to21” Various 25EZ-2 23”to40” Various 25
•IdealformultiplepiperunapplicationsincludingGas,Copper, CPVC,&PEX•Galvanizedsteeltrapezeplatformwithtelescopingdesign•WorksbestwithHOLDRITE#250and#280Clamps•Attachestostandardall-threadrodwithloadratingupto1,000pounds•Includesfourscrews
OVERHEAD SOLUTIONS
•IdealforsecuringtubingtoEZ-Struttrapezeplatform•Sound-rated/isolationvariableclosureclamps•FireretardantframeworkmeetsrequirementsofUL94V-2rating•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds
HOLDRITE VARIABLE CLAMPS – #250, #280
Model# Size For Pipe Size(s) Box Qty250 2-3/8”X2-5/8” 3/8”to1”CTS 50280 4-3/8”X5-1/8” 1”to2”CTS/IPS 50
•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•#257-P,#287-Pincludesound-rated/isolationpadstoreducenoise&vibration•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•FireretardantframeworkmeetsrequirementsofUL94V-2rating
HOLDRITE STRUT CLAMP – #257, #287#257-P, #287-P
Model# Size For Pipe Size(s) Box Qty257 2-1/2”x2-7/8” 3/8”-1”CTS 50257-P 2-1/2”x2-7/8” 3/8”-1”CTS 50287 3-1/2”x4-7/8” 1”-2”CTS/IPS 50287-P 3-1/2”x4-7/8” 1”-2”CTS/IPS 50
•IdealforsecuringtubingtoEZ-Struttrapezeplatform•MeetsrequirementsofUL94V-0andASTME8425/50ratings•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds
HOLDRITE CLAMPS – #250-S, #280-S
Model# Size For Pipe Size(s) Box Qty250-S 2-3/8”X2-5/8” 3/8”to1”CTS 50280-S 4-3/8”X5-1/8” 1”to2”CTS/IPS 50
NEW
•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•Providesdissimilarmetalisolation•MeetsrequirementsofUL94V-0andASTME8425/50ratings
HOLDRITE STRUT CLAMP – #257-S, #287-S
Model# Size For Pipe Size(s) Box Qty257-S 2-1/2”x2-7/8” 3/8”-1”CTS 50287-S 3-1/2”x4-7/8” 1”-2”CTS/IPS 50
NEW
22 (800) 321-0316 • Fax: (760) 744-0507OVERHEAD SOLUTIONS
HOLDRITE – #121-D, #121-DS, #121-DLS•IdealfordualpiperunapplicationsincludingCopper,CPVC,andPEX•#121-Dprovides2”centerlineheightfromstructure•#121-DSprovides1-1/4”centerlineheightfromstructure•#121-DLSprovides3”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceorsuspends from3/8”all-threadrod,providinganydesiredheight•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts
Model# Size For Pipe Size(s) Box Qty121-D 5”X3”X1” 1/2”,3/4”,1”CTS 25121-DS 5”x2-1/4”x1-3/4” 1/2”,3/4”,1”CTS 25121-DLS 5”x4-1/2”x1” 1/2”,3/4”,1”CTS 25
#121-DS
#121-D
#121-DLS
•IdealforsinglepiperunapplicationsincludingCopper,CPVC,andPEX•#121-Rprovides1-1/4”centerlineheightfromstructure•#121-Wprovidesa2”centerlineheightfromstructure•#121-RLSprovides3”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceorsuspends from3/8”all-threadrod,providinganydesiredheight•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts
HOLDRITE – #121-R, #121-W, #121-RLS
Model# Size For Pipe Size(s) Box Qty121-R 2”X1-3/4”X1-1/2” 1/2”,3/4”,1”CTS 25121-W 3”X1-3/4”X3/4” 1/2”,3/4”,1”CTS 25121-RLS 4-1/2”x2-5/8”x1” 1/2”,3/4”,1”CTS 50
#121-R
#121-W
#121-RLS
HOLDRITE – #121-L•Idealfordualpiperunapplicationsincluding Copper,CPVC,andPEX•Provides2”and4”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceorsuspends from3/8”all-threadrod•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts
Model# Size For Pipe Size(s) Box Qty121-L 5” X 2-1/2” X 2” 1/2”,3/4”,1”CTS 25
23www.holdrite.com OVERHEAD SOLUTIONS
•Cast-in-placeconcretehangerbracketforhorizontalsupport•Galvanizedsteelbracketwith1-1/4”,2”,4”centerlineheightsfromstructure•MeetsMSS-SP-58loadrequirements•CompatiblewithHOLDRITE#400and#261/#262inserts
HOLDRITE HANGOVER – #125, #125-D
Model# Size For Pipe Size(s) Box Qty125 8-7/8”x2-1/2” 1/2”,3/4”,1”CTS 50125-D 9-5/8”x5” 1/2”,3/4”,1”CTS 50
•Idealforthreepiperunapplicationsincluding Copper,CPVC,andPEX•Provides1-1/4”,2-3/8”,3-1/2”centerlineheightfromstructure•Galvanizedsteelbracketattachesdirectlytoflatsurfaceor suspendsfrom3/8”all-threadrod,providinganydesiredheight•Bracketcanbecastintoconcreteslab,thenbentintoposition•CompatiblewithHOLDRITE#400and#261/#262inserts
HOLDRITE – #121-O
Model# Size For Pipe Size(s) Box Qty121-O 4-1/2” X 4” X 1-1/2” 1/2”,3/4”,1”CTS 25
Model#For Pipe Size(s)
Box QtyIPS Size CTS Size
320 n/a 1/2” 50321 1/2” 3/4” 50322 3/4” 1” 50323 1” 1-1/4” 50324 1-1/4” 1-1/2” 50325 1-1/2” 2” 50326 2” 2-1/2” 50327 2-1/2” 3” 25328 3” n/a 25330 4” 4” 25
•Idealfordissimilarmetalisolationandnoise&vibrationisolation•GalvanizedsteelJ-hangerwithrubberliner•ConformswithManufacturersStandardizationSociety(MSS)SP-58and SP-69(Type5)
HOLDRITE J-HANGERS – #320 - #330
NEW
NEW
•Idealfordissimilarmetalisolationandnoise&vibrationisolation•Galvanizedsteelloophangerwith3/8”swivelnutandrubberliner•ConformswithFederalSpecificationWW-H-171(Type10),Manufacturers StandardizationSociety(MSS)SP-58andSP-69(Type10)
HOLDRITE SWIVEL LOOP HANGERS – #300 - #310
Model#For Pipe Size(s)
Box QtyIPS Size CTS Size
300 n/a 1/2” 100301 1/2” 3/4” 100302 3/4” 1” 100303 1” 1-1/4” 100304 1-1/4” - 1-1/2” 1-1/2” 100306 2” 2” 100307 2-1/2” 2-1/2” 50308 3” 3” 50310 4” 4” 25
#125
#125-D
24 TELESCOPING SOLUTIONS
• Superior Strength and Telescoping Design• Supports Copper, PEX, CPVC and Others• Numerous Components Integrate Directly into Multiple Sides of Brackets• Ideal for Vertical or Horizontal Installations
HOLDRITE®
APPLICATIONSOLUTIONS
Support and Alignment SolutionsTELESCOPING
(800) 321-0316 •Fax: (760) 744-0507
25www.holdrite.com TELESCOPING SOLUTIONS
HOLDRITE STOUT BRACKET® andHOLDRITE® EZ-STRUT™Load Ratings on page 43
•Multi-purposegalvanizedsteelbracketsupportsvarious applicationsolutions•Idealforlavatory,shower,watercloset,vertical,horizontaland muchmore•TelescopingdesignsupportsCopper,PEX,CPVC,andmanyother typesofpiping•Numerousclampsandfittingsintegrateontomultiplesidesofthe StoutBracketforsuperiorstrengthandversatility•SB1SandSB2Sincludesfourscrews
HOLDRITE STOUT BRACKET® – #SB1, #SB2 #SB1S, #SB2S
Model# Size For Pipe Size(s) Box QtySB1 10”to18” Various 50SB1S 10”to18” Various 50SB2 13”to25” Various 50SB2S 13”to25” Various 50
HOLDRITE VARIABLE CLAMPS – #250, #280
Model# Size For Pipe Size(s) Box Qty250 2-3/8”X2-5/8” 3/8”to1”CTS 50280 4-3/8”X5-1/8” 1”to2”CTS/IPS 50
•Idealfornoiseandvibrationisolationanddissimilarmetalisolation•CompatiblewithCopper,PEX,CPVC,CSST,PVC,Steel,&othermaterials•VariableclosureclampmountsdirectlytoStoutBracket&EZ-StrutBracket•Supportsupto2”pipesizeswithsoundrating
Model# Size For Pipe Size(s) Box QtyEZ-1 12”to21” Various 25EZ-2 23”to40” Various 25
•Galvanizedsteeltrapezeplatformwithtelescopingdesign•Idealformultiplepiperunapplicationincludinggas,Copper,CPVC,PEX•Sizingfrom12”to40”withloadratingofupto1000pounds•CompatiblewithHOLDRITE#250Ęclamps&otherindustryclamps•Attachestostandardall-threadrod•Includesfourscrews
HOLDRITE EZ-STRUT™ – #EZ-1, #EZ-2
•Idealforshowerhead,tubspout,verticalmid-span,andmuchmore•Supportsboth2-earedand3-eared90s •TelescopingdesignsupportsCPVC,Copper,andPEXtubing•IntegrateswithseveralHOLDRITEclampsandotherindustrystandard components
HOLDRITE STOUT BRACKET® – #SB3, #SB4
Model# Bracket Size For Pipe Size(s) Box QtySB3 10-1/4”to17-1/2” Various 50SB4 15-1/4”to25-1/2” Various 50
NEW
26 (800) 321-0316 • Fax: (760) 744-0507TELESCOPING SOLUTIONS
Model# Size For Pipe Size(s) Box Qty201 2-1/8”X1-7/8” 1/2” CTS 50202 2-1/8”X2-1/8” 3/4”CTS 50
•IdealforsecuringsingleCopper,PEX,CPVCtubingtoStoutBracket•Nylonclampsattachwithasinglefastener•FlameratedperUL94V-2standards
HOLDRITE PRO CLAMP – #201, #202
•IdealforRemodel&RepairornewconstructionforSink/Toiletapplications•TelescopingbracketandvariableclosureclampssupportCopper,PEX, andCPVC•Reducesnoiseandvibrationisolationanddissimilarmetalisolation•Installationphotosonpackaging•IdealforCounterSales•Includes(1)StoutBracket,(2)clamps,and(4)screws
HOLDRITE REMODEL & REPAIR KIT – #HR-RR-1
Model# Size For Pipe Size(s)
KitQty
6 PAK Qty
Case Qty
HR-RR-1 10”to18” 1/2”to1”CTS 1 6 36
•IdealforRemodel&RepairornewconstructionforTub/Showerapplications•TelescopingbracketandvariableclosureclampssupportCopper,PEX, andCPVC•Reducesnoiseandvibrationisolationanddissimilarmetalisolation•Installationphotosonpackaging•IdealforCounterSales•Includes(3)StoutBrackets,(4)clamps,and(12)screws
HOLDRITE REMODEL & REPAIR KIT – #HR-RR-2
Model# Size For Pipe Size(s)
KitQty
6 PAK Qty
Case Qty
HR-RR-2 10”to18” 1/2”to1”CTS 1 6 36
HOLDRITE STOUT BRACKET – #SB1-2502, #SB2-2502•Multi-purposegalvanizedsteelbracket,(2)twoHOLDRITE®
#250clamps,4screws•Idealforlavatory,shower,watercloset,vertical,horizontalandmuchmore•TelescopingdesignsupportsCopper,PEX,CPVC,andmanyother typesofpiping•NumerousclampsandfittingsintegrateintomultiplesidesoftheStout Bracketforsuperiorstrengthandversatility
Model# Size For Pipe Size(s) Box QtySB1-2502 10”to18” 1/2”-1” CTS 25SB2-2502 13”to25” 1/2”-1” CTS 25
NEW
NEW
27ACOUSTICAL SOLUTIONS
Noise and Vibration Isolation Solutions
ACOUSTICAL
ACOUSTICALAPPLICATIONSOLUTIONS
HOLDRITE®
SILENCER™
APPLICATIONSOLUTIONS
• Integrates with HOLDRITE® Pipe Support Systems • Reduces Plumbing Noise and Vibration• Compatible with Copper, PEX, CPVC, Cast Iron, and Other Materials• ISO-3822 Certified Lab Tested• Field Tested and Proven
ReducesPlumbing Noiseby 87% on Average
www.holdrite.com
28 (800) 321-0316 • Fax: (760) 744-0507ACOUSTICAL SOLUTIONS
•Idealforsound-ratedandisolationapplications,labtested•CompatiblewithCopper,PEX,CPVC,ironpipeandothersystemmaterials•VariableclosureclampmountsdirectlytoStoutBracketandEZ-StrutBracket•Supportsupto2”pipesizes,withloadratingsupto300lbs.
HOLDRITE SILENCER – #250, #280
Model# Clamp Size For Pipe Size(s) Box Qty250 2-3/8”X2-5/8” 3/8”-1”CTS 50280 4-3/8”X5-1/8” 1”-2”CTS/IPS 50
HOLDRITE STOUT BRACKET® – #SB1S, #SB2S
Model# Bracket Size For Pipe Size(s) Box QtySB1S 10”to18” Various 50SB2S 13”to25” Various 50
•Multi-purposegalvanizedbracketsupportsvariousapplicationsolutions•Idealforlavatory,shower,watercloset,vertical,horizontalandmuchmore•TelescopingdesignsupportsCopper,PEX,CPVC,andothertypesofpiping•Numerousacoustically-ratedcomponentsintegrateintomultiplesidesof theStoutBracketforsuperiorstrengthandversatility•Includesfourscrews
•Showerhead/tubspoutacousticalanchorpointclamp,labtested•Idealforminimizingnoisetransfertothebuildingsystem•MountsdirectlytotheHOLDRITEStoutBracket(SB1+SB2)•Twoscrewsincluded
Model# Clamp Size Box Qty265 2-1/4”X1-5/8”X1-1/8” 50
HOLDRITE SILENCER – #265
Model# Bracket Size Tube / Pipe Size Box QtyHSS 13”to25” 1/2” CTS 10
•Idealfornoise&vibrationisolationatShowerHeadandDiverter•ComponentsareISO-3822certifiedlabtested•Includes(2)#SB2S,(2)#261,and(1)#265
HOLDRITE SILENCER – #HSSNEW
Model# Bracket Size Tube / Pipe Size Box QtyHSTS 13”X25” 1/2” CTS 10
•IdealfornoiseandvibrationisolationatShowerHeadandTub/ShowerDiverter•ComponentsareISO-3822certifiedlabtested•Includes(3)#SB2S,(3)#261,and(2)#265
HOLDRITE SILENCER – #HSTSNEW
29www.holdrite.com
Model# Clamp Size For Pipe Size(s) Box Qty255 2-7/8”X2” 3/8”-1”CTS 50285 4-3/8”X4” 1”-2”CTS/IPS 50
•Idealforsound-ratedandisolationapplications,labtested•CompatiblewithCopper,PEX,CPVC,ironpipeandothersystemmaterials•Flatbase,variableclosureclampmountsdirectlyto#SB3&#SB4,wood, metal,orothersurfaces•Supportsupto2”pipesizes,withloadratingsupto300lbs.
HOLDRITE SILENCER – #255, #285
HOLDRITE VARIABLE STRUT CLAMP – #257-P, #287-P•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•Includesisolationpadstominimizenoiseandvibration,labtested•Providesdissimilarmetalisolation
Model# Size For Pipe Size(s) Box Qty257-P 2-1/2”x2-7/8” 3/8”-1”CTS 50287-P 3-1/2”x4-7/8” 1”-2”CTS/IPS 50
Model# Hole Needed For Pipe Size(s) Box Qty261 1-3/8”Diameter 1/2” CTS 50262 1-3/8”Diameter 3/4”CTS 50263 2”Diameter 1” CTS 50264 2”Diameter 1-1/4” CTS 50
•Idealforsound-ratedandisolationapplications,labtested•CompatiblewithCopper,PEX,andCPVCtubing•Thru-studinsert/suspensionclamp,dualpurposedesign•IntegratesdirectlywithStoutBracketorEZ-StrutBracket•Supportsupto1-1/4”tubing
HOLDRITE SILENCER – #261 - #264
ACOUSTICAL SOLUTIONS
Model# Size Hanger Size Box Qty270 3/4”Wide Various 50’Roll
•Lab-testedrubberisolationliner•Idealforsound-ratedandisolationapplicationsforCopper,PEX,CPVC, PVC,Ironpipe,ABS,andCastIron•AttachestoloophangersandHOLDRITEStoutBracket
HOLDRITE SILENCER – #270
Model# Size Hanger Size Box Qty271 2”Wide Various 25’Roll
•Lab-tested,self-adhesiverubberisolationliner•Idealforsound-ratedandisolationapplicationsforCopper,PEX,CPVC, PVC,Ironpipe,ABS,andCastIron•Attachestoclevishangersorasapipewrap
HOLDRITE SILENCER – #271
30 (800) 321-0316 • Fax: (760) 744-0507ACOUSTICAL SOLUTIONS
Model# Size Tube / Pipe Size Box Qty272-2 2” X 1/4” X 25’ Various 25’RollFelt100 2-1/4”X1/8”X100’ Various 100’Roll
•Lab-tested,self-adhesivewhitefelt•Idealforsound-ratedandisolationapplicationsforCopper,PEX,CPVC, PVC,Ironpipe,ABS,andCastIron•Eliminatesdissimilarmetalcontactandminimizesnoise/vibrationtransfer•#272-2is1/4”thick
HOLDRITE SILENCER – #272-2, #Felt 100
Model# Size Pipe Size Box Qty274 2”X2”X3/4” Various 180275 2”X2”X7/8” Various 144
275-T 2”X2”X7/8” Various 144276 2” X 2” X 1/4” Various 50278 2” X 2” X 1/4” Various 50
•#274,#275,#275-Thavelab-tested,Neoprenewhitevibrationisolationpad•Rubbervibrationisolationpadidealforriserclampsorequipmentsupport•Minimizesnoiseandvibrationtransferatpipingstacksandrisers•#275,#275-T,Ėincludesadditional10-gage,galvanizedsteelbearingplate•#275-Tincludesverticaltabsforkeepingriserclampinplace
HOLDRITE SILENCER – #274, #275, #275-T, #276, #278
#276
#278
#275
#274
#275-T
REV 3
HOLDRITE�
SILENCERTM
#275-T
PATENT PENDING
R
NEW
HOLDRITE J-HANGERS – #320 - #330•Idealfornoise&vibrationisolationanddissimilarmetalisolation•GalvanizedsteelJ-hangerwithrubberliner•ConformswithManufacturersStandardizationSociety(MSS)SP-58andSP-69(Type5)
Model#For Pipe Size(s)
Box QtyIPS Size CTS Size
320 n/a 1/2” 50321 1/2” 3/4” 50322 3/4” 1” 50323 1” 1-1/4” 50324 1-1/4” 1-1/2” 50325 1-1/2” 2” 50326 2” 2-1/2” 50327 2-1/2” 3” 25328 3” n/a 25330 4” 4” 25
NEW
HOLDRITE SWIVEL LOOP HANGERS – #300 - #310•Idealfornoise&vibrationisolationanddissimilarmetalisolation•Galvanizedsteelloophangerwith3/8”swivelnutandrubberliner•ConformswithFederalSpecificationWW-H-171(Type10),Manufacturers StandardizationSociety(MSS)SP-58andSP-69(Type10)
Model#For Pipe Size(s)
Box QtyIPS Size CTS Size
300 n/a 1/2” 100301 1/2” 3/4” 100302 3/4” 1” 100303 1” 1-1/4” 100304 1-1/4” - 1-1/2” 1-1/2” 100306 2” 2” 100307 2-1/2” 2-1/2” 50308 3” 3” 50310 4” 4” 25
31ISOLATORS &
CLAMPS SOLUTIONS
Support and Alignment SolutionsISOLATORS & CLAMPS
HOLDRITE®
APPLICATIONSOLUTIONS
Standard Polyethylene
Standard PolypropyleneFlame Rated: Meets UL 94 V-2Smoke and Flame Rated: Meets UL 94 V-0 & ASTM E84 25/50
Standard Polypropylene
Rating DescriptionColor
www.holdrite.com
32 (800) 321-0316 • Fax: (760) 744-0507ISOLATORS & CLAMPS SOLUTIONS
Isolators and Clamps
Model# Clamp Size For Pipe Size(s) Box Qty221 1-7/8” X 1-1/2” 1/2” CTS 100222 1-7/8” X 1-3/4” 3/4” CTS 100223 2-3/8” X 2-1/8” 1” CTS 50224 2-7/8” X 2-3/8” 1-1/4” CTS 25225 2-7/8” X 2-3/4” 1-1/2” CTS 25226 3-3/8” X 3-1/8” 2” CTS 25
•IdealforCopper,PEX,andCPVCtubing•MountsdirectlyonHOLDRITESTOUTBRACKETorothersurfaces•Tubingsizeupto2”
HOLDRITE SUSPENSION CLAMPS – #221 - #226
•IdealforCopper,PEX,andCPVCtubing•MountsdirectlyonHOLDRITESTOUTBRACKETorothersurfaces
HOLDRITE STANDARD CLAMPS – #231 - #236
Model# Clamp Size For Pipe Size(s) Box Qty231 2” X 7/8” 1/2” CTS 100232 2-3/8” X 2-1/8” 3/4” CTS 100233 2-3/4” X 2-1/2” 1” CTS 50234 2-3/4” X 1-3/4” 1-1/4” CTS 25235 3-1/8” X 2” 1-1/2” CTS 25236 3-1/2” X 2-1/2” 2” CTS 25
Model# Hole Needed For Pipe Size(s) Box Qty104 1-3/8”Diameter 1/2” CTS 100105 1-3/8”Diameter 3/4” CTS 100106 1-3/8”Diameter 1” CTS 100
•IdealforCopper,PEX,andCPVCtubinginstub-outlocationswith#103 series,#121series,and#110-Rbrackets•Compatiblewith#121seriesbracketsforotherapplications•Tubingsizeupto1”
HOLDRITE ISOLATORS – #104 - #106
HOLDRITE THRU-STUD ISOLATORS – #161 - #163 •Idealforthru-studapplicationsinwoodormetalframing (1-3/8” or 1-11/32” holes)•IdealforisolationofCopper,PEX,andCPVCtubing•Tubingsizeupto1”
Model# For Pipe Size(s) Bag Qty Master Carton Qty161 1/2” CTS 50 500
162 3/4” CTS 50 500
163 1” CTS 25 250
•IdealforclampinstallationforCopper,PEX,andCPVCtubing•Pre-installednailforquickinstallation•Tubingsizeupto1”
HOLDRITE SINGLE-NAIL CLAMPS – #181 - #183
Model# For Pipe Size(s) Bag Qty Master Carton Qty181 1/2” CTS 100 1000
182 3/4” CTS 50 500
183 1” CTS 25 250
33www.holdrite.comISOLATORS &
CLAMPS SOLUTIONS
Flame-Rated Isolators
•IdealformetalstudswithCopper,PEX,andCPVCtubing•MeetsUL94V-2requirements•Compatiblewith#103,#121,#125,and#110-Rseriesbrackets•Tubingsizeupto1”(1-3/8”or1-11/32”holes)
HOLDRITE ISOLATORS – #404-R - #406-R
Model# Hole Needed For Pipe Size(s) Box Qty404-R 1-3/8”Diameter 1/2” CTS 100405-R 1-3/8”Diameter 3/4” CTS 100406-R 1-3/8”Diameter 1” CTS 100
•Idealformetalthru-studapplicationsandintegrateswithHOLDRITE#121 and#125seriesbrackets•PositioninganddissimilarmetalisolationforCopper,CPVC,andPEXtubing•MeetsUL94V-2requirements
HOLDRITE ISOLATORS – #424-RB - #426-RB, #424-RR - #426-RR
#424-RB
#424-RR
NEW
Model# Hole Size Pipe Size Bag Qty
MasterCarton Qty
424-RB 1-11/32” & 1-3/8” 1/2” CTS 50 250425-RB 1-11/32” & 1-3/8” 3/4” CTS 50 250426-RB 1-11/32” & 1-3/8” 1” CTS 50 250
424-RR 1-11/32” & 1-3/8” 1/2” CTS 50 250425-RR 1-11/32” & 1-3/8” 3/4” CTS 50 250426-RR 1-11/32” & 1-3/8” 1” CTS 50 250
– Cold lines
– Hot lines
•Idealformetalthru-studapplicationsandintegrateswithHOLDRITE#121 and#125seriesbrackets•PositioninganddissimilarmetalisolationforCopper,CPVC,andPEXtubing•MeetsUL94HBrequirements•#424-C-#426-CareABSandglueablewithCPVCtubing
HOLDRITE ISOLATORS – #424 - #426
Model# Hole Size Pipe Size Bag Qty
MasterCarton Qty
424 1-11/32” & 1-3/8” 1/2” CTS 50 250425 1-11/32” & 1-3/8” 3/4” CTS 50 250426 1-11/32” & 1-3/8” 1” CTS 50 250
424-C 1-11/32” & 1-3/8” 1/2” CTS 50 250425-C 1-11/32” & 1-3/8” 3/4” CTS 50 250426-C 1-11/32” & 1-3/8” 1” CTS 50 250
NEW
Model# Clamp Size For Pipe Size(s) Bag Qty#251 2-3/8” x 2-3/4” 1/2”,3/4”,1”CTS 50
•Mountsdirectlyto#170Bracket•Notoolsrequiredtoinstallclamp •Variableclosureclampsupportsupto1”CTS
HOLDRITE RAPID – #251
34 (800) 321-0316 • Fax: (760) 744-0507
Smoke & Flame-Rated Isolators & ClampsMeets ASTM E84 25/50 and UL 94 V-0 requirements
ISOLATORS & CLAMPS SOLUTIONS
•IdealforCPVC,Copper,andPEXtubing•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)
HOLDRITE STANDARD CLAMPS – #231-S - #232-S
Model# Clamp Size For Pipe Size(s) Bag Qty231-S 2” X 7/8” 1/2” CTS 100232-S 2-3/8” X 2-1/8” 3/4” CTS 100
Model# Clamp Size For Pipe Size(s) Bag Qty221-S 1-7/8” X 1-1/2” 1/2” CTS 100222-S 1-7/8” X 1-3/4” 3/4” CTS 100
•IdealforCPVC,Copper,andPEXtubing•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)
HOLDRITE SUSPENSION CLAMPS – #221-S - #222-S
Model# Clamp Size For Pipe Size(s) Box Qty255-S 2-7/8” X 2” 3/8” - 1” CTS 50285-S 4-3/8” X 4” 1”-2”CTS/IPS 50
•CompatiblewithCopper,PEX,CPVC,ironpipeandothersystemmaterials•Flatbase,mountsdirectlytowood,metal,orothersurfaces•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)•Variableclosureclampsupportsupto2”pipesizes,withloadratingsupto300lbs.
HOLDRITE CLAMPS – #255-S, #285-S
•Idealformetalthru-studapplications •IntegrateswithHOLDRITE#121and#125seriesbrackets•PositioninganddissimilarmetalisolationforCopper,CPVC,andPEXtubing•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)
HOLDRITE ISOLATORS – #424-S - #426-S
Model# Hole Size Pipe Size Bag Qty
MasterCarton Qty
424-S 1-11/32” & 1-3/8” 1/2” CTS 25 250425-S 1-11/32” & 1-3/8” 3/4” CTS 25 250426-S 1-11/32” & 1-3/8” 1” CTS 25 250
NEW
•IdealforsecuringtubingtoEZ-Struttrapeze/Stoutplatform•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated) •Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds
HOLDRITE CLAMPS – #250-S, #280-S
Model# Size For Pipe Size(s) Box Qty250-S 2-3/8” X 2-5/8” 3/8” to 1” CTS 50280-S 4-3/8” X 5-1/8” 1”to2”CTS/IPS 50
NEW
•IdealforsecuringCopper,PEX,CPVC,andgastubingdirectlytostrut/channel•Notoolsrequiredandeliminatesneedforover20strutclampSKUs•Supports3/8”to2”tubing/pipingwithloadratingofupto300pounds•MeetsASTME8425/50andUL94V-0requirements(Plenum-rated)
HOLDRITE STRUT CLAMPS – #257-S, 287-S
Model# Size For Pipe Size(s) Box Qty257-S 2-1/2” x 2-7/8” 3/8” - 1” CTS 50287-S 3-1/2” x 4-7/8” 1”-2”CTS/IPS 50
NEW
www.holdrite.comwww.holdrite.com 35WATER HEATER
SOLUTIONS
™
IA PMOES
NFPA-5000
Support SolutionsWATER HEATER & EQUIPMENT
QUICK STRAP®
QUICK BELT™QUICK STAND™
36 (800) 321-0316 • Fax: (760) 744-0507
•CEILINGMOUNT•Cross Braces for seismic requirements•1” PVC drain fitting (MIP/Socket)•#40-SWHPsupportsupto20gallonsor375lbs.•#50-SWHPsupportsupto50gallonsor600lbs.
QUICK STAND – #40-SWHP, #50-SWHP
Model# Drain Pan Size Box Qty Pallet Qty40-SWHP 21-1/4” x 21-1/4” 1 1050-SWHP 26-1/2” x 26-1/2” 1 10
•WALLMOUNT•1” Metal drain fitting•#40-SWHP-WMsupportsupto20gallonsor375lbs.•#50-SWHP-WMsupportsupto50gallonsor600lbs.
Model# Drain PanSize Box Qty Pallet Qty40-SWHP-WM 21-1/4” x 21-1/4” 1 1050-SWHP-WM 26-1/2” x 26-1/2” 1 10
QUICK STAND – #40-SWHP-WM, #50-SWHP-WM
•CEILINGMOUNT•No Cross Braces•1” PVC drain fitting (MIP/Socket)•#40-SWHP-Asupportsupto20gallonsor375lbs.•#50-SWHP-Asupportupto50gallonsor600lbs.
QUICK STAND – #40-SWHP-A, #50-SWHP-A
Model# Drain Pan Size Box Qty Pallet Qty40-SWHP-A 21-1/4” x 21-1/4” 1 1050-SWHP-A 26-1/2” x 26-1/2” 1 10
•CEILINGMOUNT•No Cross Braces•1” Metal drain fitting•#40-SWHP-Msupportsupto20gallonsor375lbs.•#50-SWHP-Msupportupto50gallonsor600lbs.
Model# Drain Pan Size Box Qty Pallet Qty40-SWHP-M 21-1/4” x 21-1/4” 1 1050-SWHP-M 26-1/2” x 26-1/2” 1 10
QUICK STAND – #40-SWHP-M, #50-SWHP-M
•WALLMOUNT•1” PVC drain fitting (MIP/Socket)•#40-SWHP-Wsupportsupto20gallonsor375lbs.•#50-SWHP-Wsupportupto50gallonsor600lbs.
Model# Drain Pan Size Box Qty Pallet Qty40-SWHP-W 21-1/4” x 21-1/4” 1 1050-SWHP-W 26-1/2” x 26-1/2” 1 10
QUICK STAND – #40-SWHP-W, #50-SWHP-W
NEW
NEW
NEW
NEW
37www.holdrite.com
•Themosttestedandrecognizedwaterheaterrestraint•Galvanizedwaterheaterstrapinbox•Supportsupto80gallonwaterheaters
QUICK STRAP® – #QS-50, #QS-50-P
Model# Size Qty Pallet QtyQS-50 Upto80gal. 15/Box 120
QS-50-P Upto80gal. 15/Bag 180
QUICK STRAP® – #QS-120 •Themosttestedandrecognizedwaterheaterrestraint•Galvanizedwaterheaterstrapinbox•Supportsupto120gallonwaterheaters
Model# Size Box Qty Pallet QtyQS-120 Upto120gal. 12 60
•Themosttestedandrecognizedwaterheaterrestraint•Soft-beltstylewaterheaterstrap•#QB-50-Fsupportsupto80gallonwaterheaters
QUICK BELT® – #QB-50-F
Model# Size Box Qty Pallet QtyQB-50-F Upto80gal. 20 120
•Waterheaterstand,bothassembledandunassembled•Galvanizedsteelconstruction•“-U”modelsareunassembled,“-A”modelsarepre-assembled
QUICK STAND – #40-S-22-U, #40-S-22-A, #40-S-24-U, #40-S-24-A
Model# Size Box Qty Pallet Qty40-S-22-U Upto52gal./650lbs. 1 2440-S-22-A Upto52gal./650lbs. 1 2440-S-24-U Upto100gal./1,200lbs. 1 1840-S-24-A Upto100gal./1,200lbs. 1 18
QUICK STRAP® DELUXE – #QS-50-D •Themosttestedandrecognizedwaterheaterrestraint•Powder-coatedsteelwaterheaterstrapwith(2)safetycaps•Supportsupto80gallonwaterheaters•Customizedlabelavailablewithyourcompanyname
Model# Size Box Qty Pallet QtyQS-50-D Upto80gal. 15 120
Model# Size Kit Qty 6 Pak Qty Case QtyQS-50-D6 Upto80gal. 1 6 24
(800) 321-0316 • Fax: (760) 744-050738
PEXQuickSearchbyApplication
IN-SLAB / GROUND WORKRADIANT HEATING
SINK / LAVATORY
103-18 704 704110-R
WATER CLOSETTUB / SHOWER
704
SB1S
103-18 704709-L 701250 SB1S 709-EXT 704
101-18-R
PEX QUICK SEARCH
707707706 708-E708
VERTICAL
181221231
SB1S
OVERHEAD
704 705 424-RB424-RR
121-DS
DRINKING FOUNTAIN
709 704103-26 704
THRU-STUD
161 424
705103-18 701
www.holdrite.com 39
CPVCQuickSearchbyApplication
THRU-STUD / JOIST
OVERHEAD
WATER CLOSETTUB / SHOWER
SINK / LAVATORY
601-20 604 601-26 604 SB1S 211 SB1S 250
SB1S 211
SB1S 211 424-C709-L 709-EXT701
VERTICAL
SB3 255 601-20 604
SB3
DRINKING FOUNTAIN WATER HEATER
161
424-RR 221
604609-N-6
424-RB
121-DS
181
125-D 404-R
424
CPVC QUICK SEARCH
SB1S 211 601-26 604 601-20 605 SB1S 212
103-18 701
(800) 321-0316 • Fax: (760) 744-050740
SINK / LAVATORY
SB1S 250
COPPER RESIDENTIAL/COMMERCIAL QUICK SEARCH
COPPER RESIDENTIAL/COMMERCIALQuickSearchbyApplication
101-18 107-18 140 150-20
SINK / LAVATORY
TUB / SHOWER
SB3 SB3 255SB1SSB2S 250
101-26-R 107-26
URINAL
102-26
WATER CLOSET
109-A-9109-N-6 101-18
WATER HEATERS
102-18 SB2S 250
VERTICAL
SB2S 250 SB3 255 150-26
THRU-STUD
161 424
MOP SINK
SB2S
DRINKING FOUNTAIN
111-S 107-26
www.holdrite.com 41
SINK / LAVATORY
118-T-6110-S-1/2
VERTICAL
118-T-8 111-S 121 104
VERTICAL / HORIZONTAL RESTRAINT
117-4D
HORIZONTAL
115-C V-2115
OVERHEAD
WATER CLOSET / CARRIER
114-C114-CO 114-C-EXT114-CR
PRE-FAB & SPECIALITY BRACKETSQuickSearchbyApplication
280
EZ-1
250 280-S
EZ-1
250-S
PRE-FAB/SPECIALTY QUICK SEARCH
117-4
(800) 321-0316 • Fax: (760) 744-050742OVERHEAD QUICK SEARCH
QuickSearchbyApplication
HIGH & TIGHT RUNS
121-R 121-DS
PLENUM
121-W 425-S 121-DS 424-S
MULTIPLE RUN
424-RR
121-DS
121-L 121-O 280
EZ-1
250
257 287 SB1S 211
MULTIPLE RUN
LOW and GO RUNS
121-DLS 121-W 121-L 404-R 404-R 404-R
404-R 404-R 424-RB
404-R 425-RB
CAST-IN-PLACE
125-D125 404-R 404-R
FUELGASES
EZ-1
250
MEDICAL GASES
EZ-1 250257 287 280
250-S
EZ-1
280-S257-S 287-S
www.holdrite.com 43TELESCOPING
QUICK SEARCH
SINK / LAVATORY
TELESCOPINGQuickSearchbyApplication
TUB / SHOWER
Basedonsinglebeamcondition
VERTICAL / HORIZONTAL
SB3 SB2S 250SB1S 250 255
232 221
SB1S
SB1S 250 SB3 231
WATERCLOSET
SB1S 250 280
EZ-1
250
MEDICAL GASES PLENUMOVERHEAD
SB1S 211 211
FUEL GAS
EZ-1 250 280
EZ-1
250 280-S
EZ-1
250-S
HOLDRITE® EZ-STRUT™Beam Span Model# Uniform Load Center Pt. Load
12” EZ-1 1100 100018” EZ-1 510 50021” EZ-1 360 36023” EZ-2 600 40030” EZ-2 534 40036” EZ-2 175 16040” EZ-2 153 120
Basedonsinglebeamcondition
Beam Span Model# Center Pt. Load10” SB1 400
10-1/4” SB3 863
14-1/2”SB1 164SB3 480
16”SB3 322SB4 550
18”SB1 104SB2 158
22-1/2”SB2 124SB4 271
24”SB2 68SB4 228
HOLDRITE STOUT BRACKET®
TELESCOPING LOADING DATA (max load)
SB1SSB4
44 (800) 321-0316 • Fax: (760) 744-0507ACOUSTICAL QUICK SEARCH
ACOUSTICALQuickSearchbyApplication
OVERHEAD
HORIZONTAL / VERTICAL
THRU-STUD / JOIST
WATER CLOSETTUB / SHOWER
SINK / LAVATORY
SB1S 261
263
SB1S 261
RISER CLAMPS
274 275-T 276 278
272-2
265 261
SB3 255
261
SB1S 265
SB1S 250 261
271
709-EXT 261
250
103-18 261
SB1S 250
257-P 287-P
709-L 261
250 280
EZ-1
110-R
SB2S
J / LOOP / CLEVIS HANGERS
271321 308
45www.holdrite.com 45www.holdrite.com
(800) 321-0316 www.holdrite.com
Job Name Date P.O. #Estimate#
Contact PhoneMODEL # QTY DESCRIPTION BOX QTY CATALOG PAGE #100-18 20"flat,Copper-Bondedbracketpositions1/2"tubingwithuniquemfg.processanddesign 100 15101-18 20"flat,Copper-Bondedbracketpositions1/2"tubing 50 15,40101-18R 20"extrudedholes,Copper-Bondedbracketpositions1/2"tubing 25 9,15,38101-26 26"flat,Copper-Bondedbracketpositions1/2"tubing 50 15101-26R 26"extrudedholes,Copper-Bondedbracketpositions1/2"or3/4"tubing 25 9,15,40101-F 3"Copper-Bondedfloorplate,supportsone1/2"tube 50 16102-18 20"flat,Copper-Bondedbracketpositions3/4"or1"tubing 50 15,40102-26 26"flat,Copper-Bondedbracketpositions1/2",3/4"or1"tubing 50 15,40103-18 20"flat,galvanizedbracketwith1-3/8"keyedholes,positions1/2"-1"tubing 50 7,8,12,38,39,44103-26 26"flat,galvanizedbracketwith1-3/8"keyedholes,positions1/2"-1"tubing 50 7,8,12,38104 1/2"plasticinsertforusewith#103brackets 100 10,19,32,41105 3/4"plasticinsertforusewith#103brackets 100 10,32106 1"plasticinsertforusewith#103brackets 100 10,32107-18 20"flat,Copper-Bondedbracketpositions1/2",3/4"or1"tubing 50 15,40107-26 26"flat,Copper-Bondedbracketpositions1/2",3/4",1"or1-1/4"tubing 50 15,40108-20 20"extrudedholes,Copper-bondedbracketpositions1/2",3/4"or1"tubing 50 15108-26 26"extrudedholes,Copper-bondedbracketpositions1/2",3/4"or1"tubing 50 15109-A-9 "L"bracketwithsix1/2"extrudedholesat2-3/4",4-1/2",6",7",8"or9" 50 16,40109-N-6 Copper-bondedsteelbracketmadetoposition1/2"and3/4"coppertubing 50 16,40110-R Galvanizedsteelbracketforpipe-on-pipesupportfor1/2",3/4"or1"tubing 50 8,19,38,44110-S-1/2 Copper-bondedbracketwith1/2"notcheson1"centers 50 18,41111-S Copper-bondedbracketfor1/2"and3/4"tubing 50 18,41114-C Copper-bondedcarrierbracketsecures1"flushvalvestubout 6 19,41114-CEXT Providesadditionalheightof8-1/2"to25-1/2"forcarrierbrackets 6 19,41114-CO Copper-bondedoffsetcarrierbracketsecures1"flushvalvestubout 6 19,41114-CR Copper-bondedcarrierbracketwith1-1/8"notchatthetop 6 19,41115 Galvanizedsteelbracketsecures1/2"through2"pipe 25 18,41115-C Copper-bondedsteelbracketsecures1/2"through2"pipe 25 18,41117-3 5 18117-6 5 18117-8 5 18117-3D 5 18117-6D 5 18117-8D 5 18118-T6 50 18,41118-T8 50 18,41121 Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 25 19,41121-D Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22121-DLS Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22,42121-DS Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22,38,39,42121-L Galvanizedsteelbracketthatsupportstwolinesofcopper,PEXorCPVCtubing 25 22,42121-O Galvanizedsteelbracketthatsupportsthreelinesofcopper,PEXorCPVCtubing 25 23,42121-R Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 25 22,42121-RLS Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 50 22121-W Galvanizedsteelbracketthatsupportsonecopper,PEXorCPVCtube 25 22,42125 ConcreteInsertBracketwith121-Rand121-WCenterlines 50 23,42125-D ConcreteInsertBracketwith121-DCenterlines 50 23,42130 Singlesolidcopperclipfor1/2"tube 100 16131 Singlesolidcopperclipfor3/4"tube 100 16132 Singlesolidcopperclipfor1"tube 100 16140 20"Copper-bondedbracketwithextrudednotchesfor1/2"or3/4"tubing 50 16,40141 20"Copper-bonded90ºbracketwithextrudednotchesfor1/2"or3/4"tubing 50 16150-20 20"flat,Copper-bondedbracketpositions1/2"or3/4"tubing 50 16,40150-26 26"flat,Copper-bondedbracketpositions1/2"or3/4"tubing 50 16,40161 Plasticthru-studisolator(1/2"CTS) 50 32,38,39,40162 Plasticthru-studisolator(3/4"CTS) 50 32163 Plasticthru-studisolator(1"CTS) 25 32170 18"90ºgalvanizedsteelbracket 50 16170-251 18"galvanizedbracketsand#251variableclosureclamps(BULKPACKAGING) 25/50 13170-C 18"90ºCopper-bondedbracket 50 16170-S 18"90ºgalvanizedsteelbracketwithtwoscrews 50 16181 Plasticsinglenailclamp(1/2"CTS) 100 32,38,39182 Plasticsinglenailclamp(3/4"CTS) 50 32183 Plasticsinglenailclamp(1"CTS) 25 32201 Strongquick-closingplasticclampforsingle1/2"tube 50 26202 Strongquick-closingplasticclampforsingle3/4"tube 50 26
Steelbandw/stainlesssteelclamps.4"-6"IPS.Diagnolsupport-castironDWVpipingSteelbandw/stainlesssteelclamps.8"IPS.Diagnolsupport-castironDWVpiping
Steelbandwithstainlesssteelclamps.4"-6"IPS.IdealforcastironDWVpiping
Page 1 of 3
Copper-bondedpipeonpipesupportbracket-1/2"&3/4"(3/4"on6"centers)Copper-bondedpipeonpipesupportbracket-1/2"&3/4"(3/4"on8"centers)
Steelbandwithstainlesssteelclamps.8"IPS.IdealforcastironDWVpipingSteelbandw/stainlesssteelclamps.1-1/2"-3"IPS.Diagnolsupport-castironDWVpiping
Hubbard Enterprises/HOLDRITE Material "Take-off" Sheet and 2009 Catalog Page # Locator
Co. NameAddress
Steelbandwithstainlesssteelclamps.1-1/2"-3"IPS.IdealforcastironDWVpiping
VIP SOLUTIONS
(800) 321-0316 www.holdrite.com
Model# QTY DESCRIPTION BOX QTY CATALOG PAGE #211 Halfmoon,fireretardantPVCClampfor1/2"tube,UL94V0 100 13,39,42,43212 Halfmoon,fireretardantPVCClampfor3/4"tube,UL94V0 100 13,39221 1/2"Suspensiontubeclamp 100 13,33,38,39,43222 3/4"Suspensiontubeclamp 100 13,33221-S 1/2"Suspensiontubeclamp;meetsASTME-8425/50 100 34222-S 3/4"Suspensiontubeclamp;meetsASTME-8425/50 100 34223 1"Suspensiontubeclamp 50 13,33224 1-1/4"Suspensiontubeclamp 25 13,33225 1-1/2"Suspensiontubeclamp 25 13,33226 2"Suspensiontubeclamp 25 13,33231 1/2"Standardtubeclamp 100 13,33,38,43232 3/4"Standardtubeclamp 100 13,33,43231-S 1/2"Standardtubeclamp;meetsASTME-8425/50 100 34232-S 3/4"Standardtubeclamp;meetsASTME-8425/50 100 34233 1"Standardtubeclamp 50 13,33234 1-1/4"Standardtubeclamp 25 13,33235 1-1/2"Standardtubeclamp 25 13,33236 2"Standardtubeclamp 25 13,33250 Soundratedvariableclosureclamp.Supportsupto1"CTSsizes. 50 21,25,28,39,40,41,42,43,44250-S Variableclosureclamp-supportsupto1"CTSsizes;meetsASTME-8425/50 50 21,34,41,42,43251 Variableclosureclampsupportupto1"CTS.Mountsto#170bracketwithnotools/hardware 50 32255 Acousticalstandardclamp-supportsupto1"CTSsizes 50 29,39,40,43,44255-S Standardclamp-supportsupto1"CTSsizes;meetsASTME-8425/50 50 34257 Variablesizestrutclamp.Supportsupto1"CTS 50 21,42257-P Soundratedvariablesizestrutclamp.Supportsupto1"CTS 50 21,29,44257-S Variablesizestrutclamp.Supportsupto1"CTS.ASTME8425/50&UL94V-0rated 50 34,42261 1/2"Acousticalthrustudisolator/suspensionclamp 50 29,44262 3/4"Acousticalthrustudisolator/suspensionclamp 50 29263 1"Acousticalthrustudisolator/suspensionclamp 50 29,44264 1-1/4"Acousticalthrustudisolator/suspensionclamp 50 29265 Showerheadacousticanchor,mountsonHoldriteStoutBrackettominimizenoise&vibration 50 28,44270 3/4"Wideacousticalsoundinsulationlining 50'roll 30271 2"wideneopreneacousticalnoiseinsulationlinerwithadhesivebacking 25'roll 30,44272-2 2"X1/4"polyesterfelt.Acousticalnoiseinsulationw/adhesivebacking(12rollspercase) 25'roll 30,44274 2"X2"X3/4"acousticalriserclamppad(36pads/sheetand5sheets/box=180pads) 180 30,44275 2"X2"X3/4"acousticalriserclamppadw/10-gagegalvsteelbearingplate 144 30,44275-T 2"X2"X3/4"acousticalriserclamppadw/10-gagegalvsteelbearingplate&verticaltabs 144 30,44276 2"X2"X1/4"acousticalriserclamppad 50 30,44278 2"X2"X1/4"acousticalriserclamppadw/10gagegalvsteelbearingplate 50 30,44280 Soundratedvariableclosureclamp.Supportsupto2"CTS/IPSpipesizes 50 21,25,28,41,42,43,44280-S Variableclosureclamp.Supportspipeupto2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 21,34,41,42,43285 Soundratedvariableclosureclamp.Supportsupto2"CTS/IPSpipesizes 50 29,285-S Variableclampmountstoflatsurface.1"to2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 34287 Variablesizestrutclamp.Supportsupto1"-2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 21,42287-S Variablesizestrutclamp.Supportsupto1"-2"CTS/IPS.ASTME8425/50&UL94V-0rated 50 21,34,42287-P Soundratedvariablesizestrutclamp.Supportsupto1"-2"CTS/IPSpipesizes 50 21,29,44300 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1/2"CTS. 100 23,30301 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1/2"IPS&3/4"CTS. 100 23,30302 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.3/4"IPS&1"CTS. 100 23,30303 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1"IPS&1-1/4"CTS. 100 23,30304 100 23,30306 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.2"IPS&2"CTS. 100 23,30307 50 23,30308 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.3"IPS&3"CTS. 50 23,30,44310 Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.4"IPS&4"CTS. 25 23,30320 GalvanizedsteelJ-hangerwithacousticalrubberliner.1/2"CTS. 50 23,30321 GalvanizedsteelJ-hangerwithacousticalrubberliner.1/2"IPS&3/4"CTS. 50 23,30,44322 GalvanizedsteelJ-hangerwithacousticalrubberliner.3/4"IPS&1"CTS. 50 23,30323 GalvanizedsteelJ-hangerwithacousticalrubberliner.1"IPS&1-1/4"CTS. 50 23,30324 GalvanizedsteelJ-hangerwithacousticalrubberliner.1-1/4"IPS&1-1/2"CTS. 50 23,30325 GalvanizedsteelJ-hangerwithacousticalrubberliner.1-1/2"IPS&2"CTS. 50 23,30326 GalvanizedsteelJ-hangerwithacousticalrubberliner.2"IPS&2-1/2"CTS. 50 23,30327 GalvanizedsteelJ-hangerwithacousticalrubberliner.2-1/2"IPS&3"CTS. 25 23,30328 GalvanizedsteelJ-hangerwithacousticalrubberliner.3"IPS. 25 23,30330 GalvanizedsteelJ-hangerwithacousticalrubberliner.4"IPS&4"CTS. 25 23,3040-S-22-A 22"Waterheaterstand,assembled,supportsupto52gallons/650lbs. 1 3740-S-22-U 22"Waterheaterstand,unassembled,supportsupto52gallons/650lbs. 1 3740-S-24-A 24"Waterheaterstand,assembled,supportsupto100gallons/1,200lbs. 1 3740-S-24-U 24"Waterheaterstand,unassembled,supportsupto100gallons/1,200lbs. 1 37
Hubbard Enterprises/HOLDRITE Material "Take-off" Sheet and 2009 Catalog Page # Locator (Cont.)
Page 2 of 3
Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.1-1/4"-1-1/2"IPS&1-1/2CTS.
Galvanizedsteelloophangerwithswivelnutandacousticalrubberliner.2-1/2"IPS&2-1/2"CTS.
46 (800) 321-0316 • Fax: (760) 744-0507
47www.holdrite.com
(800) 321-0316 www.holdrite.com
Model# QTY DESCRIPTION BOX QTY CATALOG PAGE #40-SWHP CeilingMount.CrossBraces.1"PVCfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-A CeilingMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-M CeilingMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-W WallMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(21-1/4"diameter) 1 3640-SWHP-WM WallMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(21-1/4"diameter) 1 3650-SWHP CeilingMount.CrossBraces.1"PVCfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-A CeilingMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-M CeilingMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-W WallMount.NoCrossBraces.1"PVCfitting.SuspendedPlatform(26-1/2"diameter) 1 3650-SWHP-WM WallMount.NoCrossBraces.1"Metalfitting.SuspendedPlatform(26-1/2"diameter) 1 36404-R 1/2"FireretardantinsertsthatcanbeusedasMetalStudisolators,UL94V2 100 10,33,42405-R 3/4"FireretardantinsertsthatcanbeusedasMetalStudisolators,UL94V2 100 10,33406-R 1"FireretardantinsertsthatcanbeusedasMetalStudisolators,UL94V2 100 10,33424 GREY1/2"Isolatorformetalthru-studand#121/#125seriesbrackets.UL94HBrated 50 10,13,32,38,39,40424-RB BLUE1/2"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33,38,39,42424-RR RED1/2"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33,38,39,42424-S 25 34,42425 GREY3/4"Isolatorformetalthru-studand#121/#125seriesbrackets.UL94HBrated 50 10,13,32425-RB BLUE3/4"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33425-RR RED3/4"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33425-S 25 34,42426 GREY1"Isolatorformetalthru-studand#121/#125seriesbrackets.UL94HBrated 50 10,13,32426-RB BLUE1"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33426-RR RED1"Fireretardantisolatorsformetalthru-stud,#121/#125brackets.UL94V-2rated 50 33426-S 25 34601-20 20"Galvanizedsteelbrackettosupport1/2"&3/4"CPVCtubing 50 12,39601-26 26"Galvanizedsteelbrackettosupport1/2"&3/4"CPVCtubing 50 12,39604 1/2"Groovedinsert,CPVCcompatible,1"OD 100 12,39605 3/4"GroovedinsertCPVCcompatible,1"OD 100 12,39609-N-6 18-gagegalvanizedsteelbracketwith1"holeson2"centers 50 12,39701 1/2"CTSstuboutclampforPEXRITE®#103,#709,&d#110brackets.NoToolsRequired. 50 7,12,38,39701-0536P (1)#701and(1)1/2"CTS3-1/2"x6"CopperEll(preloaded) 25 8701-0538P (1)#701and(1)1/2"CTS3-1/2"x8"CopperEll(preloaded) 25 8701-PR PEX-to-CopperStub-outkit.(1)103-18,(2)701,(2)1/2"CTS3-1/2"x6"CopperEll 36 7704 Turnoutsupportforusewith1/2"or3/8"PEXtubing 100 7,38704-PR PEXStub-outkit.(1)103-18and(2)704turnouts.3/8"or1/2"CTSPEXtubing. 36 7705 Turn-outsupportforusewith1/2"or3/8"PEXtubing.Mountdirectlytoflatsurface. 50 9,38706 Pop-upsupportforusew/1/2"or3/8"PEXtubing.IdealforRadiantHeating. 50 9,38707 In-slab,flexibletubesupport.Holdsonetubeupto7/8"O.D. 25 9,38707-E SinglerunPOP-UPforflexible/rigidconduitorpipe.Tubesizesupto1"O.D. 25 9708 In-slab,flexibletubesupport.Holdsuptotwotubes,upto1-1/8"O.D. 15 10,38708-E Single/doublerunPOP-UPforflexible/rigidconduitorpipe.Tubesizes1/2"thru2"O.D. 15 10,38709 Galvanizedbracketwith1-3/8"keyedholes,7-1/5"longfor1/2",3/4",&1"tubing 50 8,38709-EXT Galvanized"L"bracketwith1-3/8"keyedholesat2”,4”,6”and8”for1/2",3/4",&1"tubing 50 8,38709-L Galvanized"L"bracketwith1-3/8"keyedholesfor1/2",3/4",&1"tubing 50 8,38721 Galvanizedbracket3.38"x2.75"withkeyedholefor1/2",3/4",&1"tubing 50 8EZ-1 EZ-Strut,Adjustablelengthtrapezefrom12"-21" 25 21,41,42,43,44EZ-2 EZ-Strut,Adjustablelengthtrapezefrom23"-40" 25 21Felt100 2-1/4"X1/8"polyesterfelt.Acousticalnoiseisolationliningwithadhesivebacking 100'roll 30HR-RR-1 Sink/Toiletstub-outsupportkit.(1)SB1Sbracketand(2)250clamps 36 26HR-RR-2 Tub/Showerstub-outsupportkit.(3)SB1Sbracketsand(4)250clamps 36 26HSS AcousticalShowerhead&diverterKit.Includes(2)SB1S,(2)261s,&(1)265. 10 28HSTS AcousticalShowerHead&Tub/ShowerDiverterKit.Includes(3)SB1S,(3)261s,&(2)265. 10 28QB-50-F Seatbeltsytlewaterheaterstraps,supportsupto80gallons 20 37QS-120 Galvanizedwaterheaterstraps,supportsupto120gallons 12 37QS-50 Galvanizedwaterheaterstraps,supportsupto80gallons 15 37QS-50-D Powdercoatedwaterheaterstrapsw/2safetycaps,supportsupto80gal 15 37QS-50-D6 WaterHeaterSupportkit.Powder-coatedwaterheaterstrapssupportsupto80gallons 24 37QS-50-P Galvanizedwaterheaterstraps(inabag),supportsupto80gallons 15 37SB1 TelescopingStoutbracket;10"to18"Span-noscrews 50 25SB1S TelescopingStoutbracket;10"to18"Span-fourscrews 50 9,13,25,28,38,39,40,42,43,44SB1-2502 OnetelescopingStoutBracket10"to18"-TwoStoutClamps-fourscrews 25 26SB2 TelescopingStoutbracket;13"to25"Span-noscrews 50 25SB2S TelescopingStoutbracket;13"to25"Span-fourscrews 50 9,13,25,28,40,43,44SB2-2502 OneStoutBracket13"to25"-TwoStoutClamps-fourscrews 25 26SB3 WidetelescopingStoutBracket;10-1/4"to17-1/2"Span-noscrews 50 12,25,39,40,43SB4 WidetelescopingStoutBracket;13-1/4"to25-1/2"Span-noscrews 50 12,25SC-200 Boxof200#8X1/2"selftapping,1/4"hexhead,Phillipsscrews 200 n/aV-2 Copper-Bondedsteelbracketdesignedtohold1/2"to3"pipeshorizontally 25 19,41
Page 3 of 3
Hubbard Enterprises/HOLDRITE Material "Take-off" Sheet and 2009 Catalog Page # Locator (Cont.)
YELLOW1/2"Smoke/Fireratedisolatorfor#121/#125brackets.ASTME8425/50&UL94V-0
YELLOW3/4"Smoke/Fireratedisolatorfor#121/#125brackets.ASTME8425/50&UL94V-0
YELLOW1"Smoke/Fireratedisolatorfor#121/#125brackets.ASTME8425/50&UL94V-0
48 (800) 321-0316 • Fax: (760) 744-0507
ADDITIONSANDCHANGES:Ordersnormallyshipwithin24hours.Wemakeeveryefforttocomplywithyourinstructions.Wewillacceptchangestoorders;however,additionalfreightchargesmaybeincurred.
PRODUCTRETURNS: Allreturnsmustcomplywiththeestablishedguidelinesbelow:
(a) AReturnGoodsAuthorizationnumberisrequired.AnyproductreceivedwithoutourRGAnumberwillberefused. THERGAISVALIDFOR30DAYSFROMISSUEDATE.Returnsnotreceivedwithin30dayswillberefused. (b) Returnsmustbeshippedfreightprepaidbacktodistributioncenter. (c) Allreturnedproductsmustbe(1)infullboxquantities,(2)ofcurrentdesignandmaterial,and(3)in saleablecondition. (d) AcreditmemowillbeissuedagainsttheDistributor’sNetPriceatthetimeofreturn,andwillonlybe issuedoncequantitieshavebeenverified.Creditmemosareonlyissuedforfullboxquantities. Brokenboxes,unsaleablematerial,specialsornon-catalogedproductswillnotbeconsideredforcredit. (e) A25%RESTOCKINGFEEWILLBECHARGEDFORALLRETURNS. (f) Allproductreturnsaresubjecttotheabovetermsandconditions.
ERRORS&SHORTAGES:Shippingerrors(e.g.wrongsizesorshortages)mustbereportedwithin15days.
DAMAGETOFREIGHT:Anyshipmentthatappearstobedamagedinshippingmustbenotedwhensigningforreceiptofdelivery.
LIABILITYOFMISUSE: HUBBARDENTERPRISESwillnotbeliablefordamagestopropertyorpersonsduetoimproperinstallationofmaterialorthroughattemptstoutilizethematerialunderconditionswhichexceedthedesignedcapabilities.Purchaseragreestoindemnifyandholdusharmlessforanyandallclaims,liabilities,damages,costs,andexpensesassertedagainstusorincurredbyusbecauseofinjuriestopersonordamagestopropertyresultingfromtheimproperinstallationormisuseofthematerial.
WestCoastDistributionCenter2560ProgressStreet
Vista,CA92081TollFree:(800)321.0316
Fax:(760)744.0507
TexasDistributionCenterDallas,Texas
TollFree:(800)321.0316Fax:(760)744.0507
EastCoastDistributionCenterNashville,Tennessee
TollFree:(800)321.0316Fax:(760)744.0507
1.
2.
3.
NASHVILLEWAREHOUSE
DALLASWAREHOUSE
NASHVILLEWAREHOUSE
DALLASWAREHOUSE
VISTAWAREHOUSE
VISTAWAREHOUSE
DISTRIBUTION &SHIPPING POLICY