telco test equipment - all trades · "a - z product solutions to trade and industry”...

“Service, Knowledge, Experience” A – Z Industry & Trade Solutions -Since 1995

Telco Test Equipment

Brochure 2018

ALL TRADES MFG PTY LTD; 11/5 HUDSON AVENUE CASTLE HILL NSW 2154

03/ 9780 4850

[email protected]

ALL TRADES MFG PTY LTD; 4/5 KELLETS ROAD ROWVILLE VIC 3178

02/ 8850 2700

www.all-trades.com.au

GX-2009

Four gas monitor with standard charger

R72-0306RKC24 monitor dimensions: 75mm x 70mm x 30mm

3m Hose and Sample Draw Pump

R81-1160RK-03

Calibration Cup/Sample Cup

R81-1107RK

Hard CarryCase 12 VDC Adaptor with Vehicle Plug

R49-2020RK

Complete Gas Detector KitGX-2009 Gas Detector, 3mt Hose & Probe,

240V charger, 12VdcCharger, and Carry Case

IN HOUSE CALIBRATION SERVICE AVAILABLE!

See below if you wish to order separately

ALTAIR 4X MULTIGAS DETECTOR

The ALTAIR 4X Multigas Detector surpasses industry standards in several crucial areas. Its

four-year sensor life is 60% longer than the industry average, while its 24-hour run time exceeds

the industry average by 71%.

This versatile portable detector is a perfect match for the utility industry, and its digital sensor

output makes it less likely to suffer from RF interference. The unit features exclusive

MotionAlert™, which lets others know if the user has become immobile, and InstantAlert™, a

manual alarm that alerts others of potentially dangerous situations. This rugged unit is designed to

withstand a drop of up to 20 feet and uses less than half as much calibration gas as the industry

average.

"When purchased in kit form the user can perform and print their own calibration certificates if needed, as well as carry out regular bump testing"

Ordering info;MSA-10110447 - detector only

MSA-10110447K - detector, charger, cal gas, regulator & case

MSA-10110447KP – detector, charger, cal gas, regulator, aspirator tube & carry case

•

FEATURES:

• Two-way Speakerphone

• ADSL Compatible

• Meter Pulse Detection (Option)

• Detection and Lockout of

Data Services: T-1, E1,

ISDN (BRI and PRI), SW56,

xADSL, HDSL

Built-in Ringer with

Adjustable Ring Tones

• 10 x 32 digit Speed Dial

Memory

• Last Number Redial

• Microphone Mute

• Easy-to-use Talk and Monitor

Keys

• Audible and Visual Mode

Indicators

• Line Polarity Test in any Mode

• Digital Safe Line Monitor

• Speaker Volume Control

• Unique ‘Quick Release’ Belt

Clip

K EY SPECIFICATIONS:

• Award Winning Waterproof Design

• Works dial tone on ADSL lines

• High Voltage protection with alarm

• Safe around digital services

TEL-D361

P R O D U C T D E S C R I P T I ON

In today’s evolving world of communications, technicians encount er an ever increasing amount of data on copper lines.

Whether installing, servicing or simply maintaining voice servi ce, the technician must consider the possible presence of digital

traffic. Tempo’s D361 Test Sets offer the latest in data protection, allowing technicians to test the POTS service on a live ADSL

line without fear of bringing down the data service.

With this innovative design, Tempo continues on the cutting edge of but t-in test set technology, setting new, unmatched

standards in both quality and custome r satisfaction. Our test sets give new meaning to the term “weatherproof” with an award-

winning, waterproof ca se design that allows technicians to operate with confidenc e in even the most extreme weather

conditions. Other key advancements include a high-volt age alarm and a quick release, non-metallic belt clip comp osed of

Verton® RF, a strong, lightweight structural composite. This combination of rugged technology enab les Tempo to offer the best

warranty in the industry - 3 years.

ADSL Compatible Telephone Test Set

"TELSTRA APPROVED"

D361 alarms & does

not loop the line.

This mode cannot be

overridden.

D361 alarms & does

not loop the line.

This mode can be

overridden.

D361 loops the line.

SPECIFICATIONS:

5 k ohm

10 mA

300 ohm

Electrical:

Loop Limit:

Minimum Loop Current:

Maximum Off-hook DC Resistance:

Minimum DC Resistance in Idle,

Monitor and Lockout:

Minimum AC Impedance in Monitor:

Span Power Lockout Range:

10 M ohm at 300 Vdc

400 k ohm at 1 kHz

120 Vdc minimum

450 Vdc maximum

10 pps +/- 0.1 pps

60/40% +/- 1%

800 +/- 50 ms

-6 dBm nominal

+/- 1% maximum

2 dB +/- 1 dB

100 ms nominal

PULSE (Rotary) Dial:

Pulse Rate:

Break/Make:

Interdigit Interval:

DTMF Output:

Tone Level:

Tone Frequency Error:

Tone Twist:

Flash Duration:

Memory dialling:

Stored Number Capacity:

Stored Number Length:

10 plus last number

redial

32 digits per stored

number

4 secondsPBX Pause:

POWER SOURCE:

9Vdc Alkaline Battery Life:

Low Battery:

Auto Shut-off:

3 months nominal

30 hours of continuous

loudspeaking

Visual and audible indication

5 minutes with no line DC

20 minutes with line DC

ENVIRON MENT

Operating Temperature:

Storage Temperature:

Water Resistance:

Physical Shock:

-29º F to 140º F

(-34º C to 60º C)

-58º F to 167º F

(-50º C to 75º C)

IP67 per IEC 60529

(submersion in one

metre of water for 30

minutes)

20 foot drop test onto

concrete Bellcore

TR-TSY-000344

Physical:

Length:

Width:

Height:

Weight:

Warranty:

9.75in (248mm)

2.75in (70mm)

3.375in (86mm)

1.32lbs with battery

Three Years

ORDERING INFOR M ATION:

Part Number

M0401/10

M0401/12

Description

DigAlert 361, ETSI Compliant,ADSL Compatible, 2 Way Hands Free

DigAlert 361, ETSI Compliant, 12kHz Meter Pulse,

ADSL Compatible, 2 Way Hands Free

M0023/16 DigAlert 361 Ground Start Cordset

D361 ADSL Compatible Telephone Test Set

Novel circuit design takes account of the diverse

conditions found on modern distribution line plant

D E S C R I P T I O N .

The Alert 340 Test Telephone incorporates all the Nautilus design features that provide a durable and robust instrument for

applications where DigAlert™ circuit technology is not required or necessary.

Digital Services Protection (DSP) Test Telephones are designed to operate safely in situations where telephone wiring may

be carrying Digital traffic, Voltage feed to remote electronics or Hazardous voltages that result from fault conditions or

misuse of the cable. The Alert 340 also features loud-speaking (listen only) capability.

• Loudspeaker listening

• Volume boost

• Microphone mute

• Confirmatory key beeps

• Talk/Monitor status LED

• Battery low audible tone

• Tone/ pulse

• Redial (10x24 memories)

• Flash

• Pause

• Super Hi Zpolarity

• Super Hi Zmonitor

• High monitor level

• Warble ringer

• Selectable ringer tones

• High impact resistance

• High chemical resistance

• Quick change cord

• Quick change battery

• Easy shoulder placement

• Rugged belt clip

Digital Services Protection (DSP)

In the “on hook” mode, on connection to a circuit, the Test Telephone sounds an alarm to alert the user to the presence of voltages

above 75V DC. Such voltages are normally present on circuits carrying digital services. If the circuit is active, the user can select the

high impedance MONITOR mode and listen to the sound to determine if the circuit is carrying digital services without disrupting the

traffic.

Selecting “off hook” mode will stop the alarm signal and loop the line without damage to the test set. If the alarm signal

persists, it indicates that the voltage on the line is above 120V. In this case the line is not looped avoiding damage to the test set

as well as alerting the user to the presence ofhazardous voltages.

Alert 340 Test Telephone withDSP

ITEM CODE; TEL-TEMPO340

Code: ATM-CZ20252 Contractor’s Test Phone

Designed for line installers, repair technicians and other authorised personnel for telecomms line testing and temporary communications.

Performs all functions of a base level Buttinski and has added features such as speaker phone, 13 number memory, and is “Quickswitch” ready for connection to Krone, Siemens, Madison and many other termination blocks.

Voltage testing, polarity and a high impedance monitor make this phone suitable for everyday use on today’s modern networks.

Weather and particle resistant to IP54, lightweight and rugged, the CZ20252 is ready to

perform everytime. Dimensions: 230mm x 82mm x 89mm. Weight; 0.63kg

Protection: 240Vac Battery: 9V

Loop Limit: 2k Ohm / Talk: 300 ohm typical/ Monitor: 39k Ohm Nom @ 1kHz/ IP54/

Meets safety standard AS/NZ 60950:1:2015

Great Value!!

Intuitive on-screen menus make

the RD7000+ easy to setup and provide easy access to advanced

features

High contrast LCD with auto-backlight

Base tray for accessories

High contrast LCD with

auto-backlight

Ergonomic

robust ABS case

High visibility reflective safety arrows

Powered by 2 x NiMH or

alkaline LR20 (D-Cell) batteries, or optional

rechargeable battery pack

Accessory/USB

connections

Headphone connection

Splash-proof keypad

Compass orientation display

Splash-proof keypad

Ergonomic robust ABS case

IP54 environmental protection

“Data loggingfeatures

Available”

Power IndustryThe RD7000PL+ identifies the target cable reliably, even in areas of

large-scale, trunked cable deployment of complex electrical networks.

One of the biggest challenges to operators working in the power industry is locating

pipes and cables when operating near high voltage environments, such as substations

and conduits where the presence of large signals overpower most locators.

The RD7000PL+ is designed for use in areas where excessive magnetic fields,

generated by high voltage equipment and cables, can prevent accurate locating.

Dynamic Overload Protection reduces this effect, allowing uncompromised locator

accuracy.

The RD7000PL+ has both Peak and Null modes and also a combined Peak/

Null mode which allows the identification of signal/ground distortion effects by

displaying both Peak and Null response simultaneously.

In addition, the RD7000PL+ can indicate depth in Power mode. This is particularly

useful when direct connection of a transmitter to a power cable may be hazardous

or impractical. The Compass feature aids correct alignment with the target cable,

maximising depth measurement accuracy.

The 8kHz Fault Find function is a technique that locates a cable sheath fault using

an A-frame attached to the Locator. On-screen arrows help show the fault’s

direction and help the operator locate the fault accurately to within 10cm (4").

Model No. RD7000PL+

Passive Frequencies:

Power

Radio

Active Frequencies:

512Hz

640Hz

8kHz

33kHz

65kHz

Sonde Frequencies:

33kHz

Features:

Compass

Dynamic Overload

Protection

TruDepth™

Peak mode

Depth in Power mode

8kHz Fault Find

Null mode

Peak/Null mode

StrikeAlert™

Centros™

eCAL™

Telecom IndustryLarge bundled pairs of cables require specialized location equipment

to find a selected signal.

As the Telecommunication utilities continue to deploy highly insulated copper or

fiber cables, tracing bundled cables becomes harder. The RD7000TL+ features

additional high locate frequencies capable of pinpointing high impedance cables to

help address this problem.

Most domestic telecom cables have no earth but are sheathed; using high

frequencies allows tracing without needing to ground connections. Once the

correct pipe or cable is located, the operator can accurately locate any cable

sheath faults to within 10cm (4") meter using 8kHz Fault Find mode with a

Radiodetection A-Frame.

The RD7000TL+ has both Peak and Null modes and also a combined Peak/

Null mode which allows the identification of signal/ground distortion effects by

displaying both Peak and Null response simultaneously.

Featuring Compass and Dynamic Overload Protection as standard, the

RD7000TL+ aids cable and pipe location even in electrically noisy environments,

while the addition of three sonde frequencies adds more capability and flexibility.

Model No. RD7000TL+

Passive Frequencies:

Power

Radio

Active Frequencies:

512Hz

640Hz

8kHz

33kHz

65kHz

131kHz

200kHz

Sonde Frequencies:

512Hz

640Hz

33kHz

Features:

Compass

Dynamic Overload

Protection

TruDepth™

Peak mode

Null mode

Peak/Null mode

8kHz Fault Find

StrikeAlert™

Centros™

eCAL™

“Service, Knowledge, Experience” A – Z Industry & Trade Solutions – Since 1995

oPit Lid Locator

"A - Z Product solutions to trade and industry”

ORDERING INFO

AD300A – PIT LID LOCATOR - HIGH PERFORMANCE LOW COST LOCATOR USED BY TELSTRA AND WATER UTILITIES.

7

DON’T FORGET WE SUPPLY CIVIL SAFETY EQUIPMENT!We are able to put together package or customised civil safety products to suit your particular needs. Products are supplied from leading Australian and overseas manufacturers to ensure that we provide you with quality merchandise

TRAFFIC CONES PORTABLE TRAFFIC SIGNS SAFETY DIGGING AND HOLING TOOLS BARRIERS RESCUE EQUIPMENT SAFE ENTRY BARRIER TAPES & MESH


o Loop a Line kit


ORDERING INFO

TEL-TX916 – LOOP A LINE KIT

IDEAL FOR NEW SERVICE INSTALLS & REPAIRS IDENTIFY THE PAIR AND CONTROL THE LINE

TERMINATION AT THE OSCILLATOR FOR :-Open Circuit, Connect ServiceShort Circuit, 600 Ω Quiet LinePair Short Circuit Detection

8

o Lines Test Set # 2

ORDERING INFO

ATM-CZ1000 – CABLE PAIR IDENTIFIER “F SET”

INDUSTRY STANDARD FOR 25YEARS MULTI-WAY LEAD SET WITH KRONE,RJ AND CLIPS LINE POLARITY INDICATION. 240V MAINS PROTECTED CARRY CASE

o Cable Pair Identifier

ORDERING INFO

MAS-LTSN2 – LINES TEST SET NUMBER 2

2 WAY SPEAKERPHONE WATERPROOF DESIGN WORKD DIAL TONE ON ADSL LINE HIGH VOLTAGE PROTECTION WITH ALARM SAFE AROUND DIGITAL SERVICES

o Cable Gauge

ATM-CZ20050 – CABLE GAUGE 750M

MEASURE LENGTH TO 750M EVEN IF CABLE IS BOXED

MEASURE VOLTAGE TO 250V


oTraceable Rodders – 4.5 & 6mm O/D

oTraceable Rodders – 9 & 11mm O/D


ORDERING INFO ATM-45TR60 – RODDER &FRAME – 4.5MM X 60MTR ATM-45TR80 – RODDER & FRAME – 4.5MM X 80MTR

ATM-6TR100 – RODDER & FRAME – 6MM X 100MTR ATM-6TR120 – RODDER & FRAME – 6MM X 120MTR

ACCESSORIES ATM-SL4.5 – FLEXIBLE LEADER – 4.5MM ATM-SL6 – FLEXIBLE LEADER – 6MM ATM-4.5JK – REPAIR KIT FOR 4.5MM ATM-6JK – REPAIR KIT FOR 6MM

DIMENSIONS ATM-45TR60 – 560 X 180 X 370 - 3.5KG ATM-45TR80 - 560 X 180 X 370 – 4KG ATM-6TR100 - 620 X 190 X 510 – 7KG ATM-6TR120 - 620 X 190 X 510 – 8KG

ORDERING INFO



ACCESSORIES ATM-SL9/11 – FLEXIBLE LEADER – 9MM ATM-SL9/11 – FLEXIBLE LEADER – 11MM ATM-9JK – REPAIR KIT FOR 9MM ATM-11JK – REPAIR KIT FOR 11MM

DIMENSIONS ATM-9TR125 – 920 X 185 X 510 - 32KG ATM-9TR150 - 920 X 185 X 510 – 36KG ATM-11TR200 - 1150 X 500 X 1000 – 50KG ATM-11TR250 - 1150 X 500 X 1000– 18KG

!! ABOVE ROD LENGTHS ARE THE MOST COMMONLY SOLD !!

13

As well as stocking a large range of popular Telco test equipment, We also have a range of accessories, tools, and product services.

For example –

Replacement Test Leads and repair services if required.

Test hardware such as Proving Mandrels, Safety Fuses etc.

Inhouse Calibration and repairs for Gas Detectors

Terminating, splicing, cutting and stripping tools of all types

Flexible Payment plans for big ticket items or package deals


AT ALL TRADES WE PRIDE OURSELVES ON PROVIDING QUALITY SERVICE WITH QUALITY PRODUCTS –

REMEMBER IF YOU DON’T SEE WHAT YOU NEED IN THIS BROCHURE, PLEASE CALL OR EMAIL US WITH YOUR ENQUIRY.

IN ADDITION TO OUR TEST EQUIPMENT RANGE WE ARE ALSO PROVIDE A-Z PRODUCT SOLUTIONS IN : -

• Battery and Hand Operated Crimping and cutting equipment used by Utilities and electrical contractors

• Cable Pulling equipment and accessories• Height & Safety equipment ( B-SAFE, Honeywell, MSA ,SALA

,FERNO and more )• Electrical Test & Measurement products• Dewalt,Milwaukee, Stanley Power Tools• Quality Tradesman Hand tools ( Sidchrome, Crescent, Stanley

etc )

AND MUCH MORE

2

Rodding Truck circa 1920’s

telco test equipment - all trades · "a - z product solutions to trade and industry”...

Documents