temperature sensors & transmitters - kele · products manufactured model/series page in the...
TRANSCRIPT
HU
MID
ITY
TEMPERATURE SENSORS & TRANSMITTERST
EM
PE
RA
TU
RE
S
EN
SO
RS
&
TR
AN
SM
ITT
ER
S
ACI Duct Series | p. 1201
ST-AV81H | p. 1236 KTOSA Series | p. 1219 ST-SK Series | p. 1174
Kele Stocks the Top Brands in Temperature Sensing.
BA/Immersion | p. 1214 Series
KTUS* Series| p. 1224
TM
MODEL/SERIES PAGEProducts manufactured in the United States
Products that are new to the catalog
ke le .com
TEMPERATURE SENSORS & TRANSMITTERS
TE-6300 Series | p. 1186
BA/Strap-On | p. 1257
ST-O Series | p. 1217
TM
TE
MP
ER
AT
UR
E
SE
NS
OR
S
& T
RA
NS
MIT
TE
RS
All PurposeKTA* Series — All-Purpose Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1205ST-A* Series — All-Purpose Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1207KTM*, KTMR* Series — Encapsulated Thermistor and
RTD Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1245ST-R*, ST-R*R Series — Encapsulated Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1247KTMP* Series — Mini Probe Thermistor and RTD
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1249ST-MP* Series — Mini Probe Thermistor and RTD
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1250KTM*S, KTM*SC Series — Stainless Steel Sheath
Thermistor and RTD Sensor . . . . . . . . . . . . . . . . . . .1251ST-R*S, ST-R*SC Series — Stainless Steel Sheath
Thermistor and RTD Sensors . . . . . . . . . . . . . . . . . .1253 AveragingST-FZR Series — Rigid Averaging Thermistor and RTD
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1230ST-AV81R, ST-AV85R, ST-AV91R — Platinum Curve
Rigid Averaging Sensors . . . . . . . . . . . . . . . . . . . . . .1232ST-FZ* Series — Averaging Thermistor & RTD Sensors . .1234ST-AV81H, ST-AV85H — Averaging RTD Sensors . . . . . .1236ST-AV91H — 1000 Ohm 375 Platinum Averaging
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1237ACI Averaging Series — Averaging Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1238BA/ Averaging Series — Averaging Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1239TE707C Series — Flexible Plenum and Armored Averaging
Thermistor and RTD Sensors . . . . . . . . . . . . . . . . . .1241TE200FDC Series — Flexible Averaging Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1242AS103759 — Combination Averaging Sensor/Freezestat . .1243 DuctKTD* Series — Duct Thermistor and RTD Sensors . . . . . .1195ST-D* Series — Duct Thermistor and RTD Sensors . . . . .1197KTV* Series — VAV Box Duct Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1199ACI Duct Series — Duct Thermistor and RTD Sensors . . .1201BA/ Duct Series — Duct Thermistor and RTD Sensors . . .12025, 77, 78 Universal Duct, Immersion, OSA — Kele Nickel-Iron/
Balco Immersion, Duct & Outdoor RTD Sensors . . .1204KTUS*, KTOS* Series — Duct, Immersion, OSA,
Thermistor and RTD Sensors . . . . . . . . . . . . . . . . . .1224KTU* Series — Universal-Mount Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1226ST-U* Series — Universal-Mount Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1228 ImmersionKTW* Series — Immersion Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1209ST-W* Series — Immersion Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1211ACI Immersion Series — Immersion Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1213BA/ Immersion Series — Immersion Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1214 Infrared TransmittersTY7321A1009 — Infrared Room Temperature
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1289 OSAKTO* Series — OSA Thermistor and RTD Sensors . . . . . .1216ST-O* Series — Outside Air Thermistor and RTD Sensor .1217KTOSA* Series — OSA Thermistor and RTD Sensors . . .1219ACI OSA Series — OSA Thermistor and RTD Sensors . . .1221BA/ OSA Series — OSA Temperature Sensors . . . . . . . . .1222 RTD TransmittersAS Room, Duct, OSA, and Immersion Sensors — Platinum
Room, Duct, OSA, and Immersion RTD Sensors . . .1189S241HC, TT111H-0800 — High Temperature Sensor &
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1266ST-T90 Series — 1000 Ohm 375 Platinum RTD Fixed
Temperature Transmitters . . . . . . . . . . . . . . . . . . . . .1271ST-T91 Series — Rangeable Platinum Room Temperature
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1273TT859 — Platinum 1000 Ohm Space Temperature Transmitter . . . . . . . . . . . . . . . . . . . . . .1275
T91H, T91L, T91U Series — 1000 Ohm 375 Platinum RTD Rangeable Transmitter . . . . . . . . . . . .1277T85U Series — 1000 Ohm RTD Rangeable
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1279T81U Series — 100 Ohm Platinum RTD Rangeable
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1281T71U Series — 100 Ohm Platinum RTD Rangeable
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1282T5U, T63U Series — 1000 Ohm RTD Rangeable
Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1283TT801, TT807 Series — Platinum RTD Temperature
Industrial Transmitter . . . . . . . . . . . . . . . . . . . . . . . . .1284TT809 Series — 1000 Ohm Platinum RTD Rangeable
Temperature Transmitter . . . . . . . . . . . . . . . . . . . . . .1286T81PNR, T85PNR, T90PNR Series — Platinum RTD
Temperature Transmitter . . . . . . . . . . . . . . . . . . . . . .1288RoomKTR* Series — Room Temperature Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1169ST-S*E, ST-S*EW Series — Executive Style Thermistor
and RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . .1171TE200AD Series — Executive Style Thermistor and RTD
Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1173ST-S*K Series — Decorator Room Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1174KTES* Series — Room Thermistor and RTD Sensors . . . .1176ST-S*P Series — Surface-Mount Room Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1178ACI Room Series — Room Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1180BA/ Room Series — Room Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1181KTP* Series — Stainless Steel Flush-Mount Thermistor
and RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . .1182ST-S* Series — Stainless Steel Flush-Mount Thermistor
and RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . .11845, 77, 78 Room Sensors — Nickel-Iron / Balco Room RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1188KTB* Series — Button Style Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1191ST-B* Series — Button Style Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1192ST-BP Series — Paintable Button Style Flush Mount Wall
Thermistor and RTD Sensors . . . . . . . . . . . . . . . . . .1193 Sensor Options and AccessoriesSensor Options — Room Temperature Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1295Temperature Sensor Accessories — Accessories for
Temperature Products . . . . . . . . . . . . . . . . . . . . . . . .1297Plate Pal Series — Room Temperature Display . . . . . . . . .1300 SpecialtyTE-6300 Series — 1000 Ohm Nickel Room, Duct, OSA
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1186ACI Bullet/Button Series — Bullet/Button Thermistor and
RTD Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1194ST-STP* Series — Strap-on Thermistors and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1255ACI Strap-On Series — Strap-On Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1256BA/ Strap-On Series — Strap-on Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1257ST-TS* Series — Submersible Thermistor and RTD
Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1259ST-L* Series — Ring Lug Thermistor and RTD Sensors . .1260BA/*RPFEP Series — Extreme Temperature Sensors . . . .1262BA/*-TB Series — Thermobuffer Temperature Sensor . . . .1264AS10 Series — Thermal Vial Temperature Sensing
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1267S101144, S469, S665PDY48BC, S667PDY40BC — Thermal
Ribbon RTD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1268TE200G Series — Thermal Glass Thermistor And
Rtd Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1270 Temperature SwitchesTK Series — Temperature Switch . . . . . . . . . . . . . . . . . . . .1291 Wells and AdaptorsWB, WS — Sensor Thermowells and Well Adapters . . . . .1293WEL-B, WEL-S, F2B-D, F2N-B, F2S-D — Sensor
Thermowells and Well Adapters . . . . . . . . . . . . . . . .1294
NEW!
1169
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure Rating White plasticMounting Directly to wall or single gang
back boxWiring Terminations TerminalsApprovals CEWeight 0 .2 lb (0 .09 kg)Warranty 3 years
ROOM TEMPERATURE THERMISTOR AND RTD SENSORSKTR* SERIES
DESCRIPTIONThe Kele Model KTR* Room Temperature Thermistor and RTD Sensor is a cost-effective room temperature sensor with an accuracy of ±0 .5°F (0 .28°C) . The thermistor is made of a very stable, pre-aged material that offers the reliability needed in control systems . The platinum RTD comes in 100 ohm and 1000 ohm and is compatible with most HVAC systems . All sensors come with a three-year warranty .
FEATURES• Economical• Attractive new design• Three-year warranty• ±0.5°F (0.28°C) accuracy• Durable housing• White color• Thermistor or RTD• Locking cover screws
APPLICATIONThe KTR* Series is designed to be wall mounted indoors where appearance and accuracy are important . The sensor may be mounted directly to the drywall or on standard electrical boxes . It comes in all the most common thermistors or RTDs . Options may be mixed and matched for each application .
SPECIFICATIONS
KTR*
in(cm)
2.75 (6.98)
0.18 (.47)
Adjust Tab
0.33 (.85)
Wire Way
Front Back Plate
Side 0.94 (2.38)
4.5 (11.43)
Typical logo location
LED
MB
2.64 (6.7)
1.25 (3.2)
1.5 (3.8)
3.31 (8.40)
1.31 (2.54)
.5 (1.27)
DIMENSIONS
KTR*-A10K-J1-LED-MB
NEW!TEMPERATURE
1170
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Toggle bolts or other direct wall-mount screws can be used where back box is not required. Adapters are not required when mounting directly to electrical outlet boxes.
The sensor should be mounted approximately 5' (1.5m) above the floor, on an interior wall, out of the sun, and away from any heating or cooling generating devices.
Mounting Screws
Wire Access Hole
Mounting Back Plate
Option Board Clip
CoverLocking1/16" Allen Screwsinstalled as needed
Self-Latching Cover
Basic model comes with screw terminal block, white decorator face-plate, two #6-32 screws for handy-box mounting, and two #6 x 1" screws for direct wall mounting. Locking cover screws are #6-32 with a 1/16"Allen key head, installed as needed.
Note: Adjust option requires option board removal to mount back plate.
To BAS Controller
RT1
SW3
R6
RT2
JP2SW1
D2
D3
AK
A
K
R4
R5
R2
J4
POT
LED
OUT
J3
INJP1
718
R3
J1
J2
J7
7
61
182
SENSOR
+
+
+
-
-
-
LED
MB Button
SETPOINT ADJUST
Axxx Pot to BAS Controller
TB4 for MB only
JP2 Pot Action
Sensor
Sensor to BAS Controller
LED
24 VAC/VDC
Communication Wiring J1 or J2
RJ11 plug with cover off; for J2 option
COVER ON CCRJ11AD accessory; required for J1 option RJ11 plug
Push button will short out the pot or sensor momentarily
Customer Contact C
Axxx
2
1
8
7
JP1
MB Button Jumper 1-2 Pot 3-4 Pot 5-6 Sensor 7-8 Sensor
DA
Shipped DA Left to right Low to high resistance
DA Low to high resistance RA High to low resistance
RA
MOUNTING AND SENSOR ONLY WIRING WIRING TYPICAL COVER OPTIONS
ROOM TEMPERATURE THERMISTOR AND RTD SENSORSKTR* SERIES
ORDERING INFORMATION
Sample Order
KTR3 Kele room sensor with 10,000Ω Type III thermistor
KTR85-A10K-MB Kele room sensor with 1000Ω 385 RTD with 10kΩ adjust pot and momentary switch
MODEL DESCRIPTION KTR Kele room sensor housing SENSOR SELECTION 3 10,000Ω thermistor @ 77°F (25°C), Type III 21 2252Ω thermistor @ 77°F (25°C), Type II 22 3000Ω thermistor @ 77°F (25°C), Type II 24 10,000Ω thermistor @ 77°F (25°C), Type II 27 100,000Ω thermistor @ 77°F (25°C), Type II 42 20,000Ω thermistor @ 77°F (25°C), Type IV 81 100Ω RTD @ 32°F (0°C), 385 platinum curve (yellow leads) 85 1000Ω RTD @ 32°F (0°C), 385 platinum curve (blue leads) 91 1000Ω RTD @ 32°F (0°C), 375 platinum curve (green leads) ROOM SENSOR OPTIONS XA100K Setpoint adjust with 100,000Ω span XA10K Setpoint adjust with 10,000Ω span XA20K Setpoint adjust with 20,000Ω span XA400 Setpoint adjust with 400Ω span (R5 for offset) XCL1 Custom logo one color ( CL2=two color, CL3=three color) XD Dual sensors XJ1 RJ11 externally-accessible communication jack( CCRJ11AD required) XJ2 Internal RJ11 communication jack XLED LED lamp indicator, standard 24 VAC/VDC voltage XM Momentary pushbutton switch, jumpered across sensor or pot (JP1) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) TB4 Separate termination for MB option XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accurance, themistors only ±0.135°F, 0.075°C XPL Red LED lamp externally powered 24VAC/VDC
RELATED PRODUCTS PAGE 10-531 White adaptor plate
7" x 5.25" (KTR,KHR) 1297CC-RJ11AD Adapter cable for XJ1 option with female RJ11 8-pin connector 1300
KT1 Mounting screwdriver 1/16" allen key 1390 T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281 T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279 T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!
1171
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Toggle bolts or other direct wall-mount screws can be used where conduit is not required. Adapters are not required when mounting directly to electrical outlet boxes.
Basic model comes with screw terminal block, white decorator faceplate, two#6-32 screws for handybox mounting, and two #6 x 1" screws for direct wallmounting. Cover screws are #6-32 with a 1/16" allen key head.
The sensor should be mounted approximately 5' (12.7 cm) above the floor, on an interior wall, away from any heating or cooling generating devices.
White Faceplate (standard)
Plate Mounting Screws
Wire Access Hole
Optional Customer-Supplied Handy Box
Cover Mounting 1/16 Allen Screws
ST-S*EW
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω PT 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Enclosure ST-S*E: Beige plastic with tan metal
face plate ST-S*EW: White plastic with white metal face plate
Mounting Directly to wall or single gang boxWiring Terminations TerminalsApprovals CEWeight 0 .15 lb (0 .07 kg)Warranty Lifetime
EXECUTIVE STYLE THERMISTOR AND RTD SENSORSST-S*E, ST-S*EW SERIES
XKCustom Logo(your company logo)
XJ1External CommunicationJack for use with handheldterminals, requires adapter cable CC-RJ11AD
XTA/XTAC (ST-S*E only)Analog Temperature Display50° to 90°F, 10° to 32°C
XJ2InternalCommuni-cation Jackunder thecover
XMExposed Momentary Push Button (cannot be used with XA, XJ1, or XJ2 options)
XASetpoint Adjust to provide a10 kΩ to 30 kΩ resistanceinput (1-3 kΩ and 1-1.4 kΩ available)
XMEConcealed MembraneMomentary Push Button
XPLRed LED Indicator Lamp
INCDEC
9080706050
F
DESCRIPTION
The Precon Model ST-S*E and ST-S*EW Executive Thermistor and RTD Sensor provides precision room temperature sensing for building automation systems in beige or white respectively . The active sensing element is made of a highly stable, precision thermistor material or platinum RTD .
FEATURES
• Lifetime warranty• ±0.36°F (±0.2°C) thermistor accuracy• ±0.27°F (±0.15°C) or ±0.54°F (±0.30°C) RTD accuracy• Ultra high accuracy optional• Wide selection of thermistor or RTD curves• Vented housing for quick temperature response• Adaptable with many options• Traditional beige or white covers• Durable plastic housing and base plate• Easy to mount to wall or electrical box
TM
TYPICAL MOUNTING TYPICAL COVER WITH MULTIPLE OPTIONS
SPECIFICATIONS
ST-S*E-XA-XME-XTA
NEW!TEMPERATURE
1172
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
EXECUTIVE STYLE THERMISTOR AND RTD SENSORSST-S*E, ST-S*EW SERIES
ORDERING INFORMATION
Example: ST-S3-E-XA-XTA 10,000Ω Type III executive sensor zone with setpoint adjustment and analog display
ST-S3 XA XTA
* Circuit board option | ** Cannot be mounted in conjunction with *options | Not available on EW housing
E
MODEL DESCRIPTIONST-S3 10,000Ω executive thermistor @ 77°F (25°C), Type III (gray leads)ST-S21 2252Ω executive thermistor @ 77°F (25°C), Type II (green leads)ST-S22 3000Ω executive thermistor @ 77°F (25°C), Type II (blue leads)ST-S24 10,000Ω executive thermistor @ 77°F (25°C), Type II (yellow leads)ST-S27 100,000Ω executive thermistor @ 77°F (25°C), Type II (gray leads)ST-S42 20,000Ω executive thermistor @ 77°F (25°C), Type IV (green leads)ST-S63 1000Ω nickel executive RTD @ 70°F (21°C), (yellow leads)ST-S71 100Ω ultra high accurate executive RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S81 100Ω executive RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-S85 1000Ω executive RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S91 1000Ω executive RTD @ 32°F (0°C), 375 platinum curve (green leads) E Executive beige enclosure with wide back plate EW Executive white enclosure with narrow back plate OPTIONS (List options in alphabetical order with dashes) XA * Setpoint adjustment (10,000Ω to 30,000Ω, resistance input) XA10K * Setpoint adjustment (1,000Ω to 3,000Ω, resistance input) XA2K * Setpoint adjustment (1,000Ω to 1,400Ω, resistance input) XD Dual sensors XGR Gray decorator faceplate (tan is standard) XJ1 * RJ11 externally-accessible communication jack (CCRJ11AD required) XJ2 * Internal RJ11 communication jack XK Custom Logo XM ** Momentary switch wired N.O. to terminal block XME Membrane momentary switch wired only N.O. to terminal block, tan faceplate only XMP Membrane push button switch (XME) with terminals for separate button termination XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XPL * Red LED lamp externally powered 24VAC/VDC XTA Analog temperature display , 50 to 90°F ± 1°F XTAC Centigrade analog temperature display 10 to 32°C ± 1°C XZ Three wire RTD connections (Optional only on Type 81, standard on Type 71)
4.50(11.43)
1.20(3.05)
Side View
0.75(1.90)
3.31(8.40)
2.37(6.02)
0.63(1.58)
0.88(2.22)
1.87(4.76)
1.43(3.63)
Cover Securing Screws
Cover Hooks
Board Hooks
Mounting Holestypical
Wire-WayHole
4.50(11.43)
3.23 (8.20)
3.23 (8.20)
1.20(3.05)
Bottom View
Front View
in(cm)
4.50(11.43)
2.75 (6.99)
1.20(3.05)
Bottom View
Front View
2.75 (6.99)
ST-S*E ST-S*EW
DIMENSIONS
RELATED PRODUCTS PAGE10-531 White adaptor plate 7" x 5.25" (KTR,KHR) 1297CC-RJ11AD Adapter cable for XJ1 option with female RJ11 8-pin connector 1300KT1 Mounting screwdriver 1/16" allen key 1390T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!
1173
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (±0 .2°C) RTD ±0 .54°F (±0 .3°C)Sensor Type Thermistor 2,252Ω, 3,000Ω, 10,000Ω
Type II & III, 20,000Ω RTD 100Ω Platinum 385 curve, 1,000Ω
Platinum 385 curve
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Output Range 14° to 158°F (-10° to 70°C)Wiring Terminations 6" leadsApprovals CE, RoHsWeight 0 .2 lb (0 .09 Kg)Warranty 5 years
EXECUTIVE STYLE THERMISTOR AND RTD SENSORTE200AD SERIES
4.50(11.43)
2.75 (6.99)
1.25(3.2)
Bottom View
Front View
2.75 (6.99)
TE200AD
DESCRIPTIONThe Greystone Energy Systems Model TE200AD Series Executive Room Thermistor and RTD Sensor provides precision room temperature sensing for building automation systems . The active sensing element is made of a highly stable, precision thermistor material or platinum RTD .
FEATURES• ±0.36°F (±0.2°C) thermistor accuracy• ±0.54°F (±0.3°C) RTD accuracy• Wide selection of thermistor or RTD curves• Vented housing for quick temperature response• Durable plastic housing and base plate• Easy to mount to wall or electrical box
DIMENSIONSSPECIFICATIONS
TE200AD
ORDERING INFORMATION
Example: TE200AD24AS 10,000Ω Type II executive sensor with membrane momentary switch.
TE200AD24 AS
MODEL DESCRIPTIONTE200AD2 100Ω executive RTD @ 32°F (0°C), 385 platinum curve, 3 wire (red, red, white leads)TE200AD6 3000Ω executive thermistor @ 77°F (25°C), (blue leads)TE200AD7 10,000Ω executive thermistor @ 77°F (25°C), Type III (gray leads)TE200AD8 2252Ω executive thermistor @ 77°F (25°C), (gray leads)TE200AD12 1000Ω executive RTD @ 32°F (0°C), 385 platinum curve (gray leads)TE200AD20 20,000Ω executive thermistor @ 77°F (25°C), (gray leads)TE200AD24 10,000Ω executive thermistor @ 77°F (25°C), Type II (yellow leads) OPTIONS AS Membrane momentary switch wired only N.O. to terminal block BS Momentary switch wired N.O.
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281
NEW!TEMPERATURE
1174
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Enclosure White plasticMounting Directly to wall or single gang boxWiring Terminations TerminalsApprovals CEWeight 0 .15 lb (0 .07 kg)Warranty Lifetime
DECORATOR ROOM THERMISTOR AND RTD SENSORSST-S*K SERIES
in (cm)
2.75 (6.98)
0.18 (.47)
Adjust Tab
0.33 (.85)
Wire Way
Front Back Plate
Side 0.94 (2.38)
4.5 (11.43)
Typical logo location
1.5 (3.8)
3.31 (8.40)
1.31 (2.54)
.5 (1.27)
XM option
DESCRIPTIONThe PreCon Model ST-S*K White Decorator Thermistor and RTD Sensor provides precision room temperature sensing for building automation systems . The thermistor element is made of a highly stable, pre-aged precision thermistor material accurate to within ±0 .36°F (0 .2°C) while the platinum RTD is avaialble in 100Ω and 1000Ω models . Both are compatable with most HVAC systems .
FEATURES• Lifetime warranty• Attractive new design• ±0.36°F (0.2°C) thermistor accuracy• ±0.27°F (0.15°C) or 0.54°F (0.30°C) RTD accuracy• Durable housing• White color• Thermistor or RTD• Locking cover screws
TM
APPLICATIONThe ST-S*K Series is designed to be wall mounted indoors where appearance and accuracy are important . The sensor may be mounted directly to the drywall or on standard electrical boxes . It is available in all common thermistors or RTDs .
OPTIONS• Setpoint slide adjust• Momentary override switch
DIMENSIONS
SPECIFICATIONS
ST-S*K
NEW!
1175
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Toggle bolts or other direct wall-mount screws can be used where back box is not required. Adapters are not required when mounting directly to electrical outlet boxes.
The sensor should be mounted approximately 5' (1.5m) above the floor, on an interior wall, out of the sun, and away from any heating or cooling generating devices.
Mounting Screws
Wire Access Hole
Mounting Back Plate
Option Board Clip
Cover Locking 1/16" Allen Screws Installed as needed
Self-Latching Cover
Basic model comes with screw terminal block, white decorator face-plate, two #6-32 screws for handy-box mounting, and two #6 x 1" screws for direct-wall mounting. Locking cover screws are #6-32 with a 1/16"Allen key head, installed as needed.
Note: Adjust option requires option board removal to mount back plate.
To BAS Controller
MOUNTING AND SENSOR ONLY WIRING
DECORATOR ROOM THERMISTOR AND RTD SENSORSST-S*K SERIES
ORDERING INFORMATION
Example: ST-S3K-XA 10,000Ω Type III decorator sensor with setpoint adjustmentST-S3K XA* Circuit board option
MODEL DESCRIPTIONST-S3K 10,000Ω decorator thermistor @ 77°F (25°C), Type III (gray leads)ST-S21K 2252Ω decorator thermistor @ 77°F (25°C), Type II (green leads)ST-S22K 3000Ω decorator thermistor @ 77°F (25°C), Type II (blue leads)ST-S24K 10,000Ω decorator thermistor @ 77°F (25°C), Type II (yellow leads)ST-S27K 100,000Ω decorator thermistor @ 77°F (25°C), Type II (gray leads)ST-S42K 20,000Ω decorator thermistor @ 77°F (25°C), Type IV (green leads)ST-S63K 1000Ω nickel decorator RTD @ 70°F (21°C), (yellow leads)ST-S71K 100Ω ultra high accurate decorator RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S81K 100Ω decorator RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-S85K 1000Ω decorator RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S91K 1000Ω decorator RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS XA * Setpoint adjustment (10,000Ω to 30,000Ω, resistance input) XA10K* Setpoint adjustment (1,000Ω to 3,000Ω, resistance input) XA2K * Setpoint adjustment (1,000Ω to 1,400Ω, resistance input) XD Dual sensors in one probe XK Custom Logo XM Momentary switch wired N.O. to terminal block XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XPL * Red LED lamp externally powered 24VAC/VDC
Sensor Mounted to Cover
XA Setpoint Adjust
Potentiometer
Comp Sens
P S
Ext Sens
Out Communication Bus Terminal
Setpoint Adjust
Sensor Terminals
LED Terminals 24 VAC/VDC
Jumper Pins forMomentary Push buttonOption allow locating the N.O. contacts across the sensor(S) or the setpoint (P)
Controller Temp Sensor (standard)
In Sensor
LED
Pot
Optional Board Terminations (multiple options shown)
WIRING
RELATED PRODUCTS PAGE10-531 White adaptor plate 7" x 5.25" (KTR,KHR) 1297KT1 Mounting screwdriver 1/16" allen key 1390T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!TEMPERATURE
1176
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C) Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24F (0 .13) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure White plasticMounting Directly to wall or single gang boxWiring Terminations TerminalsApprovals CEWeight 0 .12 lb (0 .05 kg)Warranty 3 years
TKTES* SERIES
DESCRIPTIONThe Kele KTES* Series Room Thermistor and RTD Temperature Sensor is a cost-effective room temperature thermistor with an accuracy of ±0 .5°F (±0 .28°C) . The thermistor is made of a very stable, pre-aged material that offers the reliability needed in most HVAC systems, and it comes with a three-year warranty .
FEATURES
• Economical• Attractive design• Three-year warranty• ±0.5°F (±0.28°C) accuracy• Durable housing• White color
APPLICATION
The KTES* Series is designed to be wall mounted indoors where appearance is important . The sensor may be mounted directly to the drywall or on a standard US electrical outlet bow without adapters .
OPTIONS
• Setpoint slide adjust• Momentary override switch
SPECIFICATIONS
4.50(11.43)
3.25(8.25)
2.75(6.98)
0.76(1.93)
Front View Side View
in(cm)
DIMENSIONS
KTES*
NEW!
1177
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
SE
NS
OR
PO
T
P S
Sensor PlateXA
Set Point Adjust
SolderPads
XMMomentaryPush Button
Override Select
Pot Termination
Factory Jumperscut and resolder jumper
to P (potentiometer)solder pads
Sensor Terminationand Push Button (N.O.)
PlateMountingScrews
Optional Customer-Supplied Handibox
Toggle bolts or other direct wall-mount screws can be used where conduit is not required . Adapters are not required when mounting directly to electrical outlet boxes .
Basic model comes with screw terminal block, two #6-32 screws for handibox mounting or for direct wall mounting .
The sensor should be mounted approximately 5' (1 .5m) above the floor, on an interior wall, away from any heating or cooling generating devices .
MOUNTING DIMENSIONS
ROOM THERMISTOR TEMPERATURE SENSORKTES* SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONKTES3 10,000Ω Room Thermistor @ 77°F (25°C), Type III Material (gray leads)KTES21 2252Ω Room Thermistor @ 77°F (25°C), Type II Material (green leads)KTES22 3000Ω Room Thermistor @ 77°F (25°C), Type II Material (blue leads)KTES24 10,000Ω Room Thermistor @ 77°F (25°C), Type II Material (yellow leads)KTES27 100,000Ω Room Thermistor @ 77°F (25°C), Type II Material (gray leads)KTES42KTES81KTES85KTES91
20,000Ω Room Thermistor @ 77°F (25°C), Type IV Material (green leads)
KTES27
OPTIONS
XA Example: KTES27-XA 100,000Ω Type II room sensor thermistor with set point adjust option
100Ω Room RTD @ 32°F (0°C), 385 platinum curve, (yellow leads)1000Ω Room RTD @ 32°F (0°C), 385 platinum curve, (blue leads)1000Ω Room RTD @ 32°F (0°C), 375 platinum curve, (green leads)
XA Setpoint adjustment (10,000 to 30,000, resistance input)XA2K Setpoint adjustment (1,000 to 1,400, resistance input)XA10K Setpoint adjustment (1,000 to 3,000Ω, resistance input)XD Dual sensorsXM Momentary switch (jumpered across sensor)XN NIST certificate of conformanceXN1 NIST certificate, one reference point 32°F(0°C)XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C)XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C)XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors)XZ Three wire RTD connections
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice
NEW!TEMPERATURE
1178
NEW!TEMPERA
TURE
20
NEW!
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Enclosure Beige plastic with aluminum plateMounting Directly to wall or BKT-1 bracket to
mount to single gang boxWiring Terminations 8’ (2 .4m) of 24 AWG pigtails pre-
stripped, Type 71 & 81 sensors have 18” leads
Approvals CEWeight 0 .1 lb (0 .05 kg)Warranty Lifetime
SURFACE-MOUNT ROOM THERMISTOR AND RTD SENSORSST-S*P SERIES
DESCRIPTIONThe Precon Model ST-S* P Surface-Mount Room Thermistor and RTD Sensor provides precision room temperature sensing for building automation systems . The active sensing element is made of a highly stable, precision thermistor material or platinum RTD .
FEATURES• Lifetime warranty• ±0.36°F (0.2°C) thermistor accuracy• ±0.27°F (0.15°C) or 0.54°F (0.30°C) RTD accuracy• Wide selection of thermistor and RTD curves• Vented housing for quick temperature response• Adaptable with many options• Traditional tan cover with brushed aluminum faceplate• Durable plastic housing and base plate• Easy to mount to wall or back box
TM
APPLICATIONThe wall-mounted enclosure is designed to be mounted indoors vertically or horizontally . The separate base plate may be mounted directly to the drywall or a standard electrical outlet box with adapters . The cover is secured with tamper resistant hex screws . Where moisture is a concern, the moisture-proofing R or R# option is required .
OPTIONS• Setpoint adjustment• Moistureproof with 18" (0.45m) leads• Momentary switch override
SPECIFICATIONS
ST-S*P
NEW!
1179
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Cover Mounting 1/16 Allen Screws
Toggle bolts or other direct wall-mount screws can be used where conduit is not required. Adapters are required when mounting directly to electrical outlet boxes. Basic model comes with base plate, cover, brushed aluminum faceplate, 18" (45.7 cm) of 24 AWG wire, and two #6 x 1 screws for direct wall mounting. Cover screws are #6-32 with a 1/16" allen key head. Terminate with butt splices or soldering. Wire nuts are not recommended.
Optional Customer-Supplied Handy Box
The sensor should be mounted approximately five feet above the floor, on an interior wall, away from any heating or cooling generating devices.
Accessory MountingBracket BKT-1
Adapter plate ISPL-1 or SSPL-1
Base Plate
0
12
3
-1 -2 -3
XA
XM
Setpoint Adjustprovides a 0Ω to 10 kΩresistance inputMomentary
Switch
MOUNTING TYPICAL COVER WITH MULTIPLE OPTIONS
SURFACE-MOUNT ROOM THERMISTOR AND RTD SENSORST-S*P SERIES
ORDERING INFORMATION
ST-S27P XM Example: ST-S27P-XB 100,000Ω Type II surface-mount zone sensor thermistor with momentary override option*Circuit board option
MODEL DESCRIPTIONST-S3P 10,000Ω surface-mount thermistor @ 77°F (25°C), Type III (gray leads)ST-S21P 2252Ω surface-mount thermistor @ 77°F (25°C), Type II (green leads)ST-S22P 3000Ω surface-mount thermistor @ 77°F (25°C), Type II (blue leads)ST-S24P 10,000Ω surface-mount thermistor @ 77°F (25°C), Type II (yellow leads)ST-S27P 100,000Ω surface-mount thermistor @ 77°F (25°C), Type II (gray leads)ST-S42P 20,000Ω surface-mount thermistor @ 77°F (25°C), Type IV (green leads)ST-S63P 1,000Ω nickel surface-mount RTD @ 70°F (21°C), (yellow leads)ST-S71P 100Ω ultra high accurate surface-mount RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S81P 100Ω surface-mount RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-S85P 1000Ω surface-mount RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S91P 1000Ω surface-mount RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS XA * Setpoint adjustment (10,000Ω to 30,000Ω, resistance input) XA10K* Setpoint adjustment (1,000Ω to 3,000Ω, resistance input) XA2K * Setpoint adjustment (1,000Ω to 1,400Ω, resistance input) XD Dual sensors in one probe XK Custom Logo XM Momentary switch wired N.O. to terminal block XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XPL * Red LED lamp externally powered 24VAC/VDC XZ Three wire RTD connections (Optional only on Type 81, standard on Type 71)
1.75(4.45)
in(cm)
3.13(7.94)
2.13(5.4)
DIMENSIONS
RELATED PRODUCTS PAGEBKT-1 Handy-box mounting bracket for wall sensor ISPL-1 Plastic ivory switch plate cover for handy-box mounting KT1 Mounting screwdriver 1/16" allen key 1390SSPL-1 Stainless steel switch plate cover for handy-box mounting T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1180
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .50°F (0 .4°C)Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curve ThermistorTemperature Range 32° to 122°F (0° to 50°C)Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C (power
needed to raise the temperature by 1°C)
Enclosure PlasticMountng Direct to wall or single gang boxWiring Terminations 10" (0 .25m) of 22 AWG wire or
terminal stripApprovals CE, RoHsWeight 0 .12 lb (0 .05 Kg)Warranty 5 years
ROOM THERMISTOR AND RTD SENSORSACI ROOM SERIES
ACI/*R/LCDRoom
in(cm)
2 .75 (7 .0)
2 .25 (5 .7)
3 .84(9 .8)
0 .60 (1 .5)
0 .92 (2 .3)
4 .51(10 .4)
1 .15 (2 .9)0 .89(2 .3)
100 .0FC
DESCRIPTIONThe ACI Series Room Thermistor and RTD Sensors are designed specifically for HVAC system temperature control . The room sensors come in thermistor and RTD sensor curves compatible with most BAS systems available today .
Room sensors are vented for indoor use with options that include setpoint adjust, push-button override, communication jacks, and display . The ACI Room Sensor should be mounted approximately 5' (12 .7 cm) above the floor . It can be mounted to a standard back box or directly to the wall using appropriate anchors for the wall covering .
FEATURES• ±0.36°F (0.2°C) accuracy• Five-year warranty• Wide selection of thermistor or RTD curves• Delta-style room enclosure• Digital display option• Custom logos
DIMENSIONS
SPECIFICATIONS
ORDERING INFORMATION
A/AN - - -RS 10KCWRA DF Example: A/AN-RS-10KCWRA-DFACI 10,000W thermistor, Type 3 Room with setpoint, 0 to 10kΩ, cool warm, reverse acting with 3.5 digit LCD Fahrenheit display
*Specs do not show in actual part number.
MODEL DESCRIPTIONA/AN 10,000W thermistor @ 77°F (25°C) (ACI/10AN), Type 3A/CP 10,000W thermistor @ 77°F (25°C) (ACI/10CP), Type 2A/20K 20,000W thermistor @ 77°F (25°C) (ACI/20,000), Type 42A/100K 100KΩ thermistor @77°F (25°C)A/100-2W 100W RTD @ 32°F (0°C), two-wire 385 curve, Type 85A/1K-2W 1000W RTD @ 32°F (0°C), two-wire 385 curve, Type 85
MOUNTING CONFIGURATIONR Room mountedRO Room with overrideRS Room with setpointRSO Room with setpoint & override
OPTIONS (RS, RSO ONLY)*10KCWRA Adjust pot (0 to 10kΩ); cool warm, reverse acting10KCWDA Adjust pot (0 to 10kΩ); cool warm, direct acting1KCWRA Adjust pot (0 to 1kΩ); cool warm, reverse acting
Display (R only)DF 3.5 digit Fahrenheit display; 24 VAC/VDC
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279UR Moisture-resistant three-wire butt splice 229
NEW!
1181
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD 385 Curve ±0 .27°F (0 .15°C) 375 Curve ±0 .54°F (0 .30°C)Sensor Type Thermmistor 10 kΩ Type II & III RTD 100Ω, 1000Ω, 385 curve; 1000Ω,
375 curveTemperature Range 32° to 158°F (-0° to 70°C)Stability Thermistor < 0 .036 F (0 .02C) per year
RTD 0 .14 °C with 6,000 continuous hours at 400 °C
Heat Dissipation 2 .7 mW/°C (power need to raise the temperature 1C), 0 .4°C/mW at 0°C
Enclosure ABS plastic, UL94V-0Mounting Directly to wall or single gang boxWiring Terminations TerminalsApprovals CE, RoHSWeight 0 .25 lb (0 .1 kg)Warranty Lifetime
DESCRIPTIONThe BAPI BA Series Room Thermistor and RTD Sensors are designed specifically for HVAC systems . The room sensors come in a variety of enclosure styles, including Delta, Precon, stainless steel plate, and BAPIstat II . This series is available with thermistor, RTD, and semiconductor sensors, which makes the BA sensors compatible with every BAS system in use today .
FEATURES• ±0.36°F (±0.2°C) Thermistor accuracy• ±0.27°F (±0.15°C) or ±0.54°F (±0.30 RTD°C) RTD
accuracy• ±2.7°F (±1.5°C) semiconductor accuracy• Lifetime limited sensor warranty• Wide selection of thermistor, RTD, and semiconductor
curves
BAS/HVAC TEMPERATURE SENSORSBA/ ROOM SERIES
SPECIFICATIONS
ORDERING INFORMATION
MODEL DESCRIPTION BA/ Room temperature sensor surface mount SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type 2 10K3 10,000Ω thermistor @ 77°F (25°C), Type 3 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve 1K375 1000Ω RTD @32°F (0°C), 375 curve ROOM ENCLOSURE R Delta style enclosure BB BAPIstat II style enclosure SP Stainless steel plate style enclosure
Example: BA/10K3-R Delta room 10,000Ω thermistor sensor BA/ 10K3 R
RELATED PRODUCTS PAGEUR Moisture-resistant three-wire butt splice 229
BA/*R BA/*-SP
NEW!TEMPERATURE
1182
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C) Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure 304 Stainless steel plateMounting Single gang back boxWiring Terminations 8' (2 .4m) of 24 AWG wire leads,Type
71 & 81 sensors have 18" leadsApprovals CEWeight 0 .2 lb (0 .10 kg)Warranty 3 years
STAINLESS STEEL FLUSH-MOUNT THERMISTOR AND RTD SENSORSKTP* SERIES
DESCRIPTIONThe Precon KTP* Series Stainless Steel Flush-Mount Thermistor and RTD Sensors provide room temperature sensing for building automation systems . The active sensing element is made of a highly stable, thermistor material or platinum RTD . This design provides moisture/vapor resistance and is bonded to a 304 stainless steel plate . The back is insulated to reduce interior wall temperature influence . This sensor is intended for interior use only .
FEATURES• Three-year warranty• ±0.50°F (±0.28°C) thermistor accuracy• ±0.60°F (±0.33°C) RTD accuracy• Wide selection of thermistor and RTD curves• Insulated backing for room temperature response• Vandal-resistant flush mounting• 304 stainless steel finish• Easy to mount to wall or back box• Standard size plate to cover mounting holes
APPLICATIONThe KTP* Series sensors are designed to be mounted on indoor walls . They are ideal for use in schools or cold storage lockers, where vandalism or fork lifts can damage ordinary wall sensors . The sensors have an insulated back that reduces the conductive influences of wall temperatures, yet allows significant convective influences to be sensed . Security screws (XS option) are available where tamper proofing is required .
OPTIONS• Setpoint adjustment• Momentary switch override• Security screws
SPECIFICATIONS
KTP*
NEW!
1183
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Toggle bolts or other direct wall-mount screws can be used where conduitis not required. Adapters are not required when mounting directly to electricaloutlet boxes. Tighten mounting screws, crushing foam gasketing until plateedges lightly touch the wall. Insulate or seal all interior holes to prevent draftsfrom affecting the temperature readings. Terminate with butt splices orsoldering. Wire nuts are not recommended.
Basic model comes with screws for stainless steel faceplate, two #6-32screws for handy-box mounting, and 8' (2.4m) of 24 AWG wire. Securityscrews (XS Option) are #6-32 with a spanner head.
Optional Customer-Supplied Handy Box
The sensor should be mounted approximately five feet above the floor, on an interior wall, away from any heating or cooling generating devices.
OVERRIDE
UP DN 0
-1
-2
-3 3
2
1
XM Momentary Push Button
XASetpoint Adjust provides a0Ω to 10 kΩ ± 3% resistance input
XS Security Screws
MOUNTING TYPICAL COVER WITH MULTIPLE OPTIONS
STAINLESS STEEL FLUSH-MOUNT THERMISTOR AND RTD SENSORSKTP* SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONKTP3 10,000Ω flush-mount thermistor @ 77°F (25°C), Type III (gray leads)KTP21 2252Ω flush-mount thermistor @ 77°F (25°C), Type II (green leads)KTP22 3000Ω flush-mount thermistor @ 77°F (25°C), Type II (blue leads)KTP24 10,000Ω flush-mount thermistor @ 77°F (25°C), Type II (yellow leads)KTP27 100,000Ω flush-mount thermistor @ 77°F (25°C), Type II (gray leads)KTP42 20,000Ω flush-mount thermistor @ 77°F (25°C), Type IV (green leads)KTP81 100Ω flush-mount RTD @ 32°F (0°C), 385 platinum curve (yellow leads)KTP85 1000Ω flush-mount RTD @ 32°F (0°C), 385 platinum curve (blue leads)KTP91 1000Ω flush-mount RTD @ 32°F (0°C), 375 platinum curve (green leads)
KTP3
OPTIONSX25 25' (7.6m) lead length 24 AWGXA Setpoint adjustment (10,000 to 30,000, resistance input)XA1500 Setpoint adjustment (0 to 1,500, resistance input)XA2K Setpoint adjustment (1,000 to 1,400, resistance input)XA10K Setpoint adjustment (1,000 to 3,000Ω, resistance input)XD Dual sensorsXK Custom logo XM Momentary switch wired N.O. to terminal blockXN NIST certificate of conformanceXN1 NIST certificate, one reference point 32°F(0°C)XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C)XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C)XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors)XS Security screws (SD-6 spanner screwdriver required)XZ Three wire RTD connections (Optional only on Type 81)
XM Example: KTP3-XM 10,000Ω Type III stainless steel flush-mount sensor with momentary switch
2.75(6.99)
3.25(8.25)
4.5(11.43)
in(cm)
DIMENSIONS
RELATED PRODUCTS PAGEKT1 Mounting screwdriver 1/16" allen key 1390SD-6 Security spanner screwdriver (required for XS option) T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1184
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Enclosure Brushed stainless steelMounting Directly to wall or single gang boxWiring Terminations 8' of 24 AWG pigtails prestripped
ends, Type 71 & 81 sensors have 18" leads
Approvals CEWeight 0 .2 lb (0 .1 kg)Warranty Lifetime
STAINLESS STEEL FLUSH-MOUNT THERMISTOR AND RTD SENSORSST-S* SERIES
DESCRIPTIONThe PreCon Model ST-S* Stainless Steel Flush-Mount Thermistor and RTD Sensor provides precision room temperature sensing for building automation systems . The active sensing element is made of a highly stable precision thermistor material or Platinum RTD . This material is ruggedized to provide moisture/vapor resistance and is bonded to a 304 stainless steel plate . The back is insulated to reduce interior wall temperature influence . This sensor is intended for interior use only .
FEATURES• Lifetime warranty• ±0.36°F (0.2°C) thermistor accuracy• ±0.27°F (0.15°C) or 0.54°F (0.30°C) RTD accuracy• Wide selection of thermistor and RTD curves• Insulated backing for room temperature response• Vandal-resistant flush mounting• Adaptable with many options• 304 Stainless steel finish• Easy to mount to wall or back box• Standard size plate to cover mounting holes
TM
APPLICATIONThe Model ST-S* is designed to be wall mounted indoors . It is ideal for use in schools or cold storage lockers, where vandalism or fork lifts can damage ordinary wall sensors . The sensor has an insulated back which reduces conductive influences of wall temperatures, yet allows significant convective influences to be sensed . Security screws, XS option, are available where tamper proofing is required .
OPERATION• Setpoint adjustment• Momentary switch override• Security screws
SPECIFICATIONS
ST-S*
NEW!
1185
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Toggle bolts or other direct wall-mount screws can be used where conduitis not required. Adapters are not required when mounting directly to electricaloutlet boxes. Tighten mounting screws, crushing foam gasketing until plateedges lightly touch the wall. Insulate or seal all interior holes to prevent draftsfrom affecting the temperature readings. Terminate with butt splices orsoldering. Wire nuts are not recommended.
Basic model comes with screws for stainless steel faceplate, two #6-32screws for handy-box mounting, and 8' (2.4m) of 24 AWG wire. Securityscrews (XS Option) are #6-32 with a spanner head.
Optional Customer-Supplied Handy Box
The sensor should be mounted approximately five feet above the floor, on an interior wall, away from any heating or cooling generating devices.
OVERRIDE
UP DN 0
-1
-2
-3 3
2
1
XM Momentary Push Button
XASetpoint Adjust provides a0Ω to 10 kΩ ± 3% resistance input
XS Security Screws
MOUNTING TYPICAL COVER WITH MULTIPLE OPTIONS
STAINLESS STEEL FLUSH-MOUNT THERMISTOR AND RTD SENSORSST-S* SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONST-S3 10,000Ω flush-mount thermistor @ 77°F (25°C), Type III (gray leads)ST-S21 2252Ω flush-mount thermistor @ 77°F (25°C), Type II (green leads)ST-S22 3000Ω flush-mount thermistor @ 77°F (25°C), Type II (blue leads)ST-S24 10,000Ω flush-mount thermistor @ 77°F (25°C), Type II (yellow leads)ST-S27 100,000Ω flush-mount thermistor @ 77°F (25°C), Type II (gray leads)ST-S42 20,000Ω flush-mount thermistor @ 77°F (25°C), Type IV (green leads)ST-S63 1000Ω flush-mount RTD @ 32°F (0°C), nickel curve (yellow leads)ST-S71 100Ω flush-mount RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-S81 100Ω flush-mount RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-S85 1000Ω flush-mount RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-S91 1000Ω flush-mount RTD @ 32°F (0°C), 375 platinum curve (green leads)
ST-S27
OPTIONSX25 25' (7.6m) lead length 24 AWGXA Setpoint adjustment (0 to 10kΩ ±3%)XA10K Setpoint adjustment (1,000 t0 3,000Ω resitance input)XA1500 Setpoint adjustment (0Ω to 1,500Ω, resistance input)XA2K Setpoint adjustment (1,000Ω to 1,400Ω, resistance input)XD Dual sensorsXK Custom logo XM Momentary switch wired N.O. to terminal blockXN NIST certificate of conformanceXN1 NIST certificate, one reference point 32°F(0°C)XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C)XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C)XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors)XS Security screws (SD-6 spanner screwdriver required)XZ Three wire RTD connections (Optional only on Type 81, standard on Type 71)
XM Example: ST-S27-XM 100,000Ω Type II stainless steel flush-mount sensor with momentary switch
2.75(6.99)
3.25(8.25)
4.5(11.43)
in(cm)
DIMENSIONS
RELATED PRODUCTS PAGEKT1 Mounting screwdriver 1/16" allen key 1390SD-6 Security spanner screwdriver (required for XS option) T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1186
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
1000 OHM NICKEL-RTD / ROOM / DUCT / OSATE-6300 SERIES
FEATURES• Easy to mount• Proven long performance• Many mounting styles• Single assembly ordering• PVC enclosure• Stainless steel insertion probe
TE-6312P-1
TEMPERATURE TE-63xx °F °C RESISTANCE Ω -50 -46 674 -40 -40 699 -30 -34 725 -20 -29 751 -10 -23 777 0 -18 803 10 -12 830 20 -7 858 30 -1 885 40 4 914 50 10 942 60 16 971 70 21 1000 80 27 1030 90 32 1060 100 38 1090
TEMPERATURE TE-63xx °F °C RESISTANCE Ω 110 43 1121 120 49 1152 130 54 1184 140 60 1216 150 66 1248 160 71 1281 170 77 1314 180 82 1348 190 88 1382 200 93 1417 210 99 1452 220 104 1487 230 110 1524 240 116 1560 250 121 1597
PERFORMANCE CHARTS
TE-6316P-1
TE-6311P-1
TE-6313P-1 TE-6300-603 TE-6314P-1
Accuracy Room/Probe ± 0 .34°F (± 0 .18°C) Averaging ±3°F (±1 .67°C)Sensor Type 1000Ω nickel @ 70°F (21°C)Temperature Range -50° to 220°F (-46° to 104°C)Sensitivity Approx 3Ω/°F (5 .4 Ω/°C)Operating Temperature -50° to 122°F (-46° to 50°C)
Enclosure PVC conduit boxWiring Terminations 6" (15 .24 cm) of 22 AWGProbe Duct/OSA/Strap-on 0 .25" (0 .64 cm) stainless steel Wall Thin film on circuit board with coating Averaging 0 .093" (0 .24 cm) copperWarranty 1 year
SPECIFICATIONS
DESCRIPTIONThe Johnson Controls Room, Duct and OSA 1000Ω Nickel RTD sensors are specifically designed for HVAC and BAS systems . The active element is a nickel-based sensor that has been proven to be very stable and robust with many years of service life . The sensors come complete and ready to install for their specific applications .
Model TE-6300-603 TE-6311P-1 TE-6312P-1 TE-6313P-1 TE-6314P-1 TE-6316P-1Type Strap-on Duct Immersion OSA Wall Averaging
Accessories APB-28 N/AWB-9
TCC-111N/A N/A M-648-K
Weight 0.05 lb (0.02 Kg) 0.45 lb (0.2 Kg) 0.4 lb (0.18 Kg) 0.35 lb (0.16 Kg) 0.3 lb (0.14 Kg) 1.0 lb (0.45 Kg)
INDIVIDUAL SPECIFICATIONS
NEW!
1187
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATION
4.46(11.33)
3.47(8.81)
4.47(11.35)
2.75(6.99)
0.25 (0.63)
7.5 max(19.05)
7.5 max(19.05)
Mounting Plate
1.72(4.37)
3.13(7.95)
2.13(5.41)
1.81(4.60)
Mounting Plate
0.67(1.70) 45˚
TE-6313 Outdoor Air Sensor
TE-6311 Duct Probe Sensor
TE-6314 Wall-Mount Sensor
TE-6316 Duct Averaging Sensor
TE-6312 Well Insertion Sensor
TE-6300 Strap-On Sensor
4.47(11.35)
2.75(6.99) 0.09
(0.24)
1.72(4.37)
6.0 max(15.24)
2.75(6.99)
1/2" NPT 0.25 (0.63)
4.5 (11.43)
WB-9 or WS-9
0.25(0.63)
3 (7.62)
4.47(11.35)
1.72(4.37)
in(cm)
DIMENSIONS
1000 OHM NICKEL-RTD / ROOM / DUCT / OSATE-6300 SERIES
MODEL DESCRIPTIONTE-6300-603 Strap-on 1000Ω nickel RTDTE-6311P-1 Duct-mount 1000Ω nickel RTDTE-6312P-1 Immersion 1000Ω nickel RTDTE-6313P-1 OSA-mount 1000Ω nickel RTDTE-6314P-1 Wall-mount 1000Ω nickel RTDTE-6316P-1 Duct averaging 1000Ω nickel RTD
Type 63 models may be used in place of these located on this page .
CROSS REFERENCES
RELATED PRODUCTS PAGEAPB-28 Adjustable pipe bracket 2"-8" diameter 1391CC-1G-K Plastic capillary and sensor holder mounting clip 1391M-648-K Copper-clad capillary mounting clip 1391T63U-XR 1000 ohm Nickel, 4-20 mA temperature transmitter, custom rangeable 1283TCC-111 Thermal conductive compound 111 ml tub 1298WB-9 9in brass bulb well WS-9 9in SS bulb well
NEW!TEMPERATURE
1188
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
Sensitivity Type 5 2 .2Ω/°F @ 70°F (21°C) Type 77 2 .48Ω/°F @ 70°F (21°C) two red
wires Type 78 4 .96Ω/°F @ 70°F (21°C) two gray
wiresSensor Type Type 5 1000Ω Nickel ±0 .12% @ 70°F
(21°C) Type 77 1000Ω Balco ±0 .12% @ 70°F°F
(21°C) Type 78 2000Ω Balco ±0 .12% @ 70°F
(21°C)Temperature Range -30° to 240°F (34° to 115°C)Sensor Type Type 5, 77 1000Ω ±0 .12% @ 70°F (21°C) Type 78 2000Ω ±0 .12% @ 70°F (21°C)Mounting Directly to wall or single gang boxWarranty 1 year
NICKEL-IRON / BALCO RTD ROOM SENSORSTYPE 5, 77, 78 ROOM SENSORS
DESCRIPTIONThe Kele Wire Wound Nickel-Iron RTD Balco Room Sensors are used to provide reliable, accurate temperature readings in surface-mount room environments . The room sensors feature a stainless steel insulated plate, a standard plastic ventilated enclosure, or a deluxe executive enclosure design . The stainless steel plate is ideal for areas of vandalism or where the sensor can be easily knocked off the wall . The sensors are designed for interior use only in the temperature range of -30° to 140°F (-34° to 60°C) .
SPECIFICATIONS
ST-T*E ST-S*
ST-S*K ST-S*P
MODEL DESCRIPTIONST-S Surface-mount room sensor RTD SENSOR TYPE 5 1000Ω nickel-iron, Balco sensor 77 1000Ω nickel-iron, Balco sensor 78 2000Ω nickel-iron, Balco sensor ENCLOSURE P Plastic ventilated room enclosure E Executive-style room enclosure with tan faceplate – Stainless steel plate K Decorator-style room enclosure
ST-S 5 E Example: ST-S5E Executive style 1000Ω nickel-iron room
sensor with tan faceplate
RELATED PRODUCTS PAGEKT1 Mounting screwdriver 1/16” allen key 1390T5U Series Temperature transmitter for 1000Ω nickel-iron Balco sensor 1283UR Moisture-resistant three-wire butt splice 229
NEW!
1189
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy ±0 .9°F (0 .5°C) or ±0 .2% Ro trimStability Better than 0 .05°C per yearSensor Type 1000Ω platinum two-wire 0 .00375
Ω/Ω/°C, 100Ω platinum three-wire 0 .00385 Ω/Ω/°C
Temperature Range Room "S" -58° to 175°F (-50° to 80°C) Duct "D", "E" -58° to 500°F (-50° to 260°C) OSA "O", "W" -58° to 175°F (-50° to 80°C) Immersion "P", "Q" -50° to 500°F (-46° to 260°C)Probe Length Range 2" to 48" long
Probe Material Room 0 .187" diameter aluminum Duct 0 .25" diameter stainless steel OSA 0 .187" diameter stainless steel Immersion 0 .25" diameter stainless steelEnclosure Room Plastic with aluminum faceplate Duct, Immersion Electro zinc-plated box with 1/2"
knockout OSA White polyvinyl with weatherresistant
boxWiring Terminations 4" 22 AWG silver-plated stranded
copper, Teflon insulatedWarranty 3 years
PLATINUM ROOM, DUCT, OSA, AND IMMERSION RTD SENSORSAS ROOM, DUCT, OSA, AND IMMERSION SENSORS
DESCRIPTIONThe Minco Room, Duct, Outside Air, and Immersion Temperature RTD Sensors use a thin film platinum element for fast, accurate point measurement for energy and environmental control applications .
The Model AS _ _ _ S industrial room-mount housing provides an accurate, professional appearance . This housing can either direct mount or mount directly to a standard handibox or wire mold .
The Model AS _ _ _ D duct-mount sensor features a rugged, stainless steel probe mounted in a standard handibox, making installation quick and easy with self-tapping screws . The Model AS _ _ _ E uses a weather resistant box
The Model AS _ _ _ O outside air sensor features a non-heat conductive, solar reflecting noncorrosive shield . This configuration is completely sealed against moisture in weather conditions . The slotted shield allows air to flow freely to the stainless steel probe to provide accurate measurement . Installation is made easy with a 1/2" female threads .
The Model AS _ _ _ Q immersion probes are designed with a 1/2" tapered thread for easy installation in thermowells . The Model AS _ _ _ P uses a weather-resistant box .
FEATURES• Low cost, easy installation• Rugged design• Platinum RTDs• Interchangeable sensors• NIST certification available
SPECIFICATIONS
WB-6
AS2PW000S
AS2PW055Q
AS2PW040O
AS2PW080D
NEW!TEMPERATURE
1190
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
1.88(4.76)
LLL8.0
(20.32)
4.0(10.16)
0.25(0.64)
dia
AS___040O Outside Air Sensor
AS___000SRoom-Mount Sensor
AS___080D Duct-Mount Sensor
Stainless SteelProbe
1/2" Knockouts
Foam Gasket
AS___055Q Immersion ProbeMounted in Handy Box
1.88(4.76)
1.0(2.54)
4.0(10.16)
0.25(0.64)
dia
LLL5.5
(13.97)
1/2" Knockouts
1/2" NPT Typicalboth sides
Stainless SteelProbe
in(cm)
Housing Bottom View
Housing Top View
2.75(6.98)
1.58(4.01)
4.50(11.43)
2.88(7.30)
4.63(11.75)
2.0(5.08)
1.5(3.81)
5.5(13.97)
1/2" FNPT
DIMENSIONS
PLATINUM ROOM, DUCT, OSA, AND IMMERSION RTD SENSORSAS ROOM, DUCT, OSA, AND IMMERSION SENSORS
ORDERING INFORMATION
MODEL DESCRIPTIONAS3 Assembly probe for three-wire RTDs (PD sensors only)AS2 Assembly probe for two-wire RTDs PD 100Ω 0.00385 Ω/Ω/°C platinum curve, 6" leads, three-wire RTD PW 1000Ω 0.00375 Ω/Ω/°C platinum curve, 6" leads, two-wire RTD LLL Length LLL in 0.1" increments 040 = 4.0", 120 = 12.0", 0.000 for all space sensors “S” D Duct mount, handy-box 1/2" knockouts, LLL typically = 8.0" (080) E Duct mount, weatherproof box, LLL typically = 8.0" (080) O Outside air, weatherproof box with weather shield, LLL = 4.0" (040) Q Immersion, handy-box 1/2" knockouts, LLL typically = 5.5" for 6" well insertion (055) P Immersion, weatherproof box, LLL typically = 5.5" for 6" well insertion (055) S Space, indoor room, wall-mount housing, LLL = 000 W Wall mount, outside, weatherproof box, LLL typically 4.0" (040) 000 No transmitter 801 TT-801, 3-wire fixed range, 100Ω, 385 curve, PD sensor only 807 TT-807, 2-wire fixed range, 1000Ω, PW sensor only XX No transmitter EN Range codes per Minco letter ranges (-20°/140°F) or (-29°/60°C) S Range codes per Minco letter ranges (0°/100°F) or (-18°/38°C) A Range codes per Minco letter ranges (20°/120°F) or (-7°/49°C) BI Range codes per Minco letter ranges (30°/130°F) or (-1°/54°C) KK Range codes per Minco letter ranges (30°/180°F) or (-1°/82°C) BN Range codes per Minco letter ranges (30°/240°F) or (-1°/116°C) N Range codes per Minco letter ranges (32°/122°F) or (0°/50°C) H Range codes per Minco letter ranges (40°/90°F) or (4°/32°C) M Range codes per Minco letter ranges (-50°/50°C) C Range codes per Minco letter ranges (0°/100°C) BW Range codes per Minco letter ranges (0°/250°C) JW Range codes per Minco letter ranges (0°/500°C) 1 No calibration data, sensor or transmitter 2 Sensor/Transmitter matched at 0°C with NIST
Sample order:AS3PD080D000XX1: 8" duct probe with three-wire,100Ω, 385 curve platinum RTD
AS2PW055Q000XX1:5.5" immersion probe with two-wire, 1000Ω, 375 curve RTD
RELATED PRODUCTS PAGEDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229WB-6 Brass well 1293WS-6 Stainless steel well 1293
NEW!
1191
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .60°F (0 .33°C) RTD ±0 .50°F (0 .28°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24F (0 .13) over five years RTD 100% (no drift platinum), Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure Button style brass, aluminum, 304
Stainless steelMounting Directly to wallWiring Terminations 8' (2 .4m) of 24 AWG wire leads,
type 81 sensors have 18" leadsApprovals CEWeight 0 .25 lb (0 .10 kg)Warranty 3 years
0.625(1.6)
InsulatingWall Housing
SensorHousing
0.50(1.3)
0.9(2.3)
in(cm) 0.32
(0.8)wall
0.80(2.0)
0.875(2.2)
DESCRIPTIONThe Kele KTB* Series Button Style Flush-Mount Thermistor and RTD Sensors provide room temperature sensing for building automation systems . The active sensing element is made of a highly stable, thermistor material or platinum RTD . This design provides moisture/vapor resistance and is bonded to either brass, steel or aluminum button style housing easily mountable into any wall . This sensor is intended for interior use only .
FEATURES• Three-year warranty• ±0.50°F (±0.2°C) thermistor accuracy• ±0.60°F (±0.33°C) RTD accuracy• Ultra high accuracy available• Wide selection of thermistor and RTD curves• Optional brass, steel, or aluminum metal button style
housing• Small, nearly invisible footprint
DIMENSIONS
BUTTON STYLE THERMISTOR AND RTD SENSORSKTB* SERIES
SPECIFICATIONS
ORDERING INFORMATION
MODEL DESCRIPTION KTB3 10,000Ω button style thermistor @ 77°F (25°C), Type III (gray leads)KTB21 2252Ω button style thermistor @ 77°F (25°C), Type II (green leads)KTB22 3000Ω button style thermistor @ 77°F (25°C), Type II (blue leads)KTB24 10,000Ω button style thermistor @ 77°F (25°C), Type II (yellow leads)KTB27 100,000Ω button style thermistor @ 77°F (25°C), Type II (gray leads)KTB42 20,000Ω button style thermistor @ 77°F (25°C), Type IV (green leads)KTB81 100Ω button style RTD @ 32°F (0°C), 385 platinum curve (yellow leads)KTB85 1000Ω button style RTD @ 32°F (0°C), 385 platinum curve (blue leads)KTB91 1000Ω button style RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS B Brass housing A Aluminum housing S Steel housing
KTB*
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229TB-A Aluminum button enclosure onlyTB-B Brass button enclosure onlyTB-S Stainless Steel button enclosure only
NEW!TEMPERATURE
1192
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III, 20 kΩ,
100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise the
temperature by 1°C)Enclosure Brass, aluminum,304 Stainless steel
housingMounting Directly to the wallWiring Terminations 8' (2 .4m) of 24 AWG pigtails with
prestripped ends, type 71 & 81 have 18" leads
Approvals CEWeight 0 .2 lb (0 .1 kg)Warranty Lifetime
BUTTON STYLE THERMISTOR AND RTD SENSORSST-B* SERIES
0.625(1.6)
InsulatingWall Housing
SensorHousing
0.50(1.3)
0.9(2.3)
in(cm) 0.32
(0.8)wall
0.80(2.0)
0.875(2.2)
DESCRIPTIONThe Precon ST-B* Series Button Style Flush-Mount Thermistor and RTD Sensors provide precision room temperature sensing for building automation systems . The active sensing element is made of a highly stable, precision thermistor material or platinum RTD . This design provides moisture/vapor resistance and is bonded to either brass, steel or aluminum button style housingeasily mountable into any wall . This sensor is intended for interior use only .
FEATURES• Lifetime warranty• ±0.36°F (±0.2°C) thermistor accuracy• ±0.27°F (±0.15°C) or ±0.54°F (±0.30°C) RTD accuracy• Ultra high accuracy available• Wide selection of thermistor and RTD curves• Optional brass, steel, aluminum metal buttonstyle
housing• Small, nearly invisible footprint
TM
DIMENSIONS
SPECIFICATIONS
ORDERING INFORMATIONMODEL DESCRIPTION ST-B3 10,000Ω button style thermistor @ 77°F (25°C), Type III (gray leads)ST-B21 2252Ω button style thermistor @ 77°F (25°C), Type II (green leads)ST-B22 3000Ω button style thermistor @ 77°F (25°C), Type II (blue leads)ST-B24 10,000Ω button style thermistor @ 77°F (25°C), Type II (yellow leads)ST-B27 100,000Ω button style thermistor @ 77°F (25°C), Type II (gray leads)ST-B42 20,000Ω button style thermistor @ 77°F (25°C), Type IV (green leads)ST-B63 1000Ω button style nickel RTD @ 70°F (21°C), (yellow leads)ST-B71 100Ω ultra high accuracy button style RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-B81 100Ω button style RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-B85 1000Ω button style RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-B91 1000Ω button style RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS B Brass housing A Aluminum housing S Steel housing
ST-B Button Sensor
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TB-A Aluminum button enclosure onlyTB-B Brass button enclosure onlyTB-S Stainless Steel button enclosure only
NEW!
1193
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
1.31(3.33)
2.213(5.62)
1.05(2.67)
1.53(3.89)
in(cm)
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω, Pt 385 Curve Type 85 1000Ω, Pt 385 Curve Type 91 1000Ω, Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40 to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTermpaerature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over five yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Mounting Directly to wallWiring Terminations All Others 8' (2 .4m) of 24 AWG prestripped
pigtails, Type 71 & 81 sensors have 18" leads
Enclosure White plasticApprovals CEWeight 0 .1 lb (0 .05 kg)Warranty Lifetime
DESCRIPTIONThe Precon ST-BP* Series Paintable Button Style Flush-Mount Thermistor and RTD Wall Sensors provide precision room temperature sensing for building automation systems . The ST-BP Series drastically descreases the footprint of the traditional box sensor so that it becomes virtually invisible once it is painted to match the decor . The active sensing element is made of a highly stable, precision thermistor material or platinum RTD . This design is intended for interior use only is bonded to a plastic paintable housing .
FEATURES• Lifetime sensor warranty• Paintable housing• Flush mount• Installs in drywall• No back box required• Virtually undetectable when painted
DIMENSIONS
PAINTABLE BUTTON STYLE FLUSH MOUNT WALL SENSORST-BP* SERIES
SPECIFICATIONS
ORDERING INFORMATION
MODEL DESCRIPTIONST-BP3 10,000Ω paintable flush-mount button style thermistor @ 77°F (25°C), Type III (gray leads)ST-BP21 2252Ω paintable flush-mount button style thermistor @ 77°F (25°C), Type II (green leads)ST-BP22 3000Ω paintable flush-mount button style thermistor @ 77°F (25°C), Type II (blue leads)ST-BP24 10,000Ω paintable flush-mount button style thermistor @ 77°F (25°C), Type II (yellow leads)ST-BP27 100,000Ω paintable flush-mount button style thermistor @ 77°F (25°C), Type II (gray leads)ST-BP42 20,000Ω paintable flush-mount button style thermistor @ 77°F (25°C), Type IV (green leads)ST-BP63 1000Ω paintable flush-mount button style nickel RTD @ 70°F (21°C), (yellow leads)ST-BP71 100Ω paintable flush-mount ultra high accuracy button style RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-BP81 100Ω paintable flush-mount button style RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-BP85 1000Ω paintable flush-mount button style RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-BP91 1000Ω paintable flush-mount button style RTD @ 32°F (0°C), 375 platinum curve (green leads)
ST-BP*
TM
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!TEMPERATURE
1194
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
BULLET/BUTTON TEMPERATURE SENSORSACI BULLET/BUTTON SERIES
DESCRIPTIONThe ACI Bullet/Button Series Thermistor and RTD Sensors are designed specifically for HVAC system temperature control . The button and bullet style sensors come in thermistor or RTD sensor curves .
The A/*BP Stainless Steel Thermistor and RTD Sensor is for under-insulation mounting and direct contact to the pipe . Clean off any insulation or rust to promote solid contact, and secure with tie wraps so the probe is parallel to the pipe .
FEATURES• Five-year warranty• Stainless steel casing (BP)• Small footprint for hidden applications (BBS. SBS)• Brass or stainless button casing (BBS, SBS)• Available in thermistor or RTD
ACI Button Sensor
ACI Bullet SensorAccuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .50°F (0 .4°C)Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curveTemperature Range -40° to 302°F (-40° to 150°C)Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C (power needed to
raise the temperature by 1°C)Enclosure Button Brass, Stainless Bullet Stainless Flush StainlessMounting Button, Surface mount Directly to wall Bullet Strap on to pipe Flush Directly to wall Wiring Terminations 10" of 22 AWG wire or terminal stripApprovals CE, RoHsWeight Button 0 .12 lb (0 .05 Kg) Bullet 0 .04 lb (0 .02 Kg) Surface mount 0 .2 lb (0 .09 Kg)Warranty 5 years
24" Leads(0 .6m)
1" Long x0 .250" OD
Bullet Probe(2 .5cm x 0 .6cm Ø)
A/*-BPStainless Steel Probe
0 .17(0 .43)
0 .38(0 .96)
0 .9(2 .3)
1 .6(4 .1)
0 .215(0 .55)
0 .15(0 .38)
0 .615(1 .6) Spacer
A/*BBS, SBSButton Sensor
0 .88(2 .23)
DIMENSIONS
SPECIFICATIONS
in (cm)
ORDERING INFORMATION
A/AN BP Example: A/AN-BP ACI bullet 10,000Ω thermistor sensor
MODEL DESCRIPTION (choose one)A/AN 10,000Ω thermistor @ 77°F (25°C), Type 3A/CP 10,000Ω thermistor @ 77°F (25°C), Type 2A/20K 20,000Ω thermistor @ 77°F (25°C), Type 42A/100K 100kΩ thermistor@ 77°F (25°C), Type 27A/100-2W 100Ω RTD @ 32°F (0°C), two-wire 385 curveA/1K-2W 1000Ω RTD @ 32°F (0°C), two-wire 385 curve MOUNTING CONFIGURATION (choose one) BP Stainless steel bullet probe BBS Brass button sensor SBS Stainless steel button sensor SP Flush mount sensor
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
ACI Flush Mount Sensor
NEW!
1195
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ, Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 Curve
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Enclosure Metal handy box, weather resitant
box optionalMounting Directly to duct, wall or single gang
boxWiring Terminations 8' (2 .4m), 24 AWG wire leads, type
81 sensors have 18" (0 .45m) leadsProbe Seamless 304 stainless steel tube,
1/4" ODApprovals CEWeight KTD 0 .72 lb (0 .33 kg) KTDNB 0 .2 lb (0 .09 kg)Warranty 3 years
DUCT THERMISTOR AND RTD SENSORSKTD* SERIES
Vinyl Grommet
Mounting T-Bar
4.0(10.2)
in(cm)
0.25(0.64)
1.70(4.3)
KTD*
3.88(9.89)
4.87(12.38)
DESCRIPTIONThe Kele KTD* Duct Thermistor and RTD Sensors are designed to be cost effective with accuracies of ±0 .5°F (±0 .28°C) . Each uses metal enclosures and is constructed for easy installation with any building automation system (BAS) . The thermistor is made of a very stable, pre-aged material that offers long-life reliability for HVAC control . The platinum RTD comes in 100Ω and 1000Ω versions . All sensors come with a three-year warranty .
FEATURES
• Economical• Metal enclosures with stainless steel probes• Three-year warranty• Thermistor or RTD sensor selections
APPLICATION
The KTD* Series sensors are designed for direct mounting on sheet metal duct systems . Where conduit is required, the duct sensors have a universal nylon mounting connector that adapts to a 1/2" knockout in a standard handy box . The nylon fitting has a 1/2" NPT female conduit fitting .
The duct temperature sensors are waterproof and can be used in high humidity and condensing air . The sensors are point-sensitive and come standard with 9" (22 .8 cm) insertion depth . The XL option provides custom lengths .
DIMENSIONS
SPECIFICATIONS
KTDNB3-GF KTDNB3
KTD3 KTD3-W
NEW!TEMPERATURE
1196
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
MODEL DESCRIPTION KTD Duct temperature sensor KTDNB Duct temperature sensor with no box SENSOR SELECTION 3 10,000Ω thermistor @ 77°F (25°C), Type III 21 2252Ω thermistor @ 77°F (25°C), Type II 22 3000Ω thermistor @ 77°F (25°C), Type II 24 10,000Ω thermistor @ 77°F (25°C), Type II 27 100,000Ω thermistor @ 77°F (25°C), Type II 42 20,000Ω thermistor @ 77°F (25°C), Type IV 81 100Ω RTD @ 32°F (0°C), 385 platinum curve (yellow leads) 85 1000Ω RTD @ 32°F (0°C), 385 platinum curve (blue leads) 91 1000Ω RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS
Example: KTD-3 Duct sensor with 10,000Ω thermistorKTD 3
QD¼ Nylon insulated Quick Disconnect 1/4"X25 25' (7.6m) lead length 24 AWGXC25 25' (7.6m) lead length jacketed cableXCO 1/2" LB condulet fitting XCP25 25' Non-shielded plenum cableXD Dual sensors in one probeXG Greenfield fitting (factory installed)XH Handy box housing (factory installed)XHP Non-metallic handy box housing ( factory installed)XL Custom length insertion probes 1" to 108"XL2 Custom length insertion probe, 4-7/8"(12.38 cm)XL2 in Custom length insertion probe, 2"(5.08 cm)XLT Liquid-tight fitting (factory installed)XN NIST certificate of conformanceXNB 1/2" MNPT brass close nippleXNP 1/2" MNPT plastic close nippleXN1 NIST certificate, one reference point 32°F(0°C)XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C)XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C)XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors)XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C)XW Weather resistant housing (factory installed)XZ Three wire RTD connections (optional only on Type 81)
DUCT THERMISTOR AND RTD SENSORSKTD* SERIES
Direct duct-mount screws can be used where conduit is not required. Adapters are not required when mounting directly to outlet boxes. Install grommet in the9/16" (1.43 cm) insertion hole.
Basic model comes with 8' (2.4m) of 24 AWG, 9" (22.86 cm) probe with T-bar, grommet, and #6 x 1 screws for direct duct mounting.
Insertion Hole is 9/16" (1.43 cm)
Vinyl Grommet
1/2" NPT
Basic Installation
Greenfield Fitting
Duct temperature sensor withGreenfield fitting option (GF)
MOUNTING
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!
1197
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Mounting Directly to duct, wall, or single gang
boxWiring Terminations 8' (2 .4m) of 24 AWG pigtails with
prestripped ends, type 71 & 81 sensors have 18" leads
Approvals CEWeight 0 .25 lb (0 .1 kg) with no optionsWarranty Lifetime
DUCT THERMISTOR AND RTD SENSORSST-D* SERIES
3.88(9.89)
9.0(22.86)
Standard
0.25(0.64)
Vinyl Grommet1/2" NPT
in(cm)
DESCRIPTIONThe PreCon Model ST-D* Duct Thermistor and RTD Sensor provides precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is a highly stable precision thermistor material or platinum RTD . The sensing element is sealed with a thermally conductive compound in a 9" (22 .8 cm) long 304 stainless steel tube attached to a 4" (10 cm) electrical strap . The slots in the mounting bracket form mounting ears for direct duct mounting and standard electrical boxes . The grommet on the tube fitting seals a 9/16" (1 .43 cm) insertion hole .
FEATURES
• Lifetime warranty• Wide selection of thermistor and RTD curves• Tip sensitive for precise temperature response• Adaptable with many options• 304 stainless steel probe • Greenfield fitting standard• Ultra high accuracy optional
TM
APPLICATION
The ST-D* Series sensors are designed for direct mounting on sheet metal duct systems . Where conduit is required, the duct sensors have a universal nylon mounting connector that adapts to a 1/2" knockout in a standard handy box . The nylon fitting has a 1/2" NPT female conduit fitting .
The duct temperature sensors are waterproof and can be used in high humidity and condensing air . The sensors are point-sensitive and come standard with 9" (22 .8 cm) insertion depth . The XL option provides custom lengths .
DIMENSIONS
SPECIFICATIONS
ST-D3
ST-D91-XH
NEW!TEMPERATURE
1198
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Direct duct-mount screws can be used where conduit is not required. Adapters are not required when mounting directly to outlet boxes. Install grommet in the9/16" (1.43 cm) insertion hole.
Basic model comes with 8' (2.4m) of 24 AWG, 9" (22.86 cm) probe with T-bar, grommet, and #6 x 1 screws for direct duct mounting.
Insertion Hole is 9/16" (1.43 cm)
Vinyl Grommet
1/2" NPT
Basic Installation
Greenfield Fitting
Duct temperature sensor withGreenfield fitting option (GF)
MOUNTING
DUCT THERMISTOR AND RTD SENSORSST-D* SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONST-D3 10,000Ω duct thermistor @ 77°F (25°C), Type III (gray leads)ST-D21 2252Ω duct thermistor @ 77°F (25°C), Type II (green leads)ST-D22 3000Ω duct thermistor @ 77°F (25°C), Type II (blue leads)ST-D24 10,000Ω duct thermistor @ 77°F (25°C), Type II (yellow leads)ST-D27 100,000Ω duct thermistor @ 77°F (25°C), Type II (gray leads)ST-D42 20,000Ω duct thermistor @ 77°F (25°C), Type IV (green leads)ST-D63 1000Ω nickel duct RTD @ 70°F (21°C), (yellow leads)ST-D71 100Ω ultra high accurate duct RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-D81 100Ω duct RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-D85 1000Ω duct RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-D91 1000Ω duct RTD @ 32°F (0°C), 375 platinum curve (green leads)
ST-D3 XG
OPTIONS (List options in alphabetical order with dashes)QD¼ Nylon insulated Quick Disconnect 1/4"X25 25' (7.6m) lead length 24 AWGXC25 25' (7.6m) lead length jacketed cableXCO 1/2" LB condulet fitting XCP25 25' Non-shielded plenum cableXD Dual sensors in one probeXG Greenfield fitting (factory installed)XH Handy box housing (factory installed)XHP Non-metallic handy box housing ( factory installed)XL Custom length insertion probes 1" to 108"XL2 Custom length insertion probe, 4-7/8"(12.38 cm)XL2 in Custom length insertion probe, 2"(5.08 cm)XLT Liquid-tight fitting (factory installed)XN NIST certificate of conformanceXNB 1/2" MNPT brass close nippleXNP 1/2" MNPT plastic close nippleXN1 NIST certificate, one reference point 32°F(0°C)XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C)XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C)XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors)XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C)XW Weather resistant housing (factory installed)XZ Three wire RTD connections (optional only on Type 81, standard on Type 71, not available with XC25 and XCP25)
Example: ST-D3-XG 10,000Ω Type III duct temperature sensor with Greenfield fitting
RELATED PRODUCTS PAGEKT1 Mounting screwdriver 1/16" allen key 1390T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!
1199
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
KTV3-CP5
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252kΩ, 3kΩ, 10kΩ Type II & III,
20kΩ, 100kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure Metal handy box, weather resistant
box optionalMounting T-bar with protective grommet seal,
Directly to Duct or Single gang boxWiring Terminations 5' (1 .5m), 24 AWG wire leads
with optional quick disconnects and plenum rated cable, type 81 sensors have 18" leads
Probe Seamless 304 stainless steel tube, 1⁄4" OD, 4 .87" (12 .4 cm) long
Approvals CEWeight 0 .15 lbs (0 .07 kg)Warranty 3 years
VAV BOX DUCT TEMPERATURE SENSORSKTV* SERIES
DESCRIPTIONThe Kele KTV* VAV Box Duct Thermistor and RTD sensors are designed to be cost-effective with accuracies of 0 .5°F (0 .28°C) . Each mounts directly to the duct and is constructed for easy installation with optional quick disconnects and plenum cable when needed . The thermistor is made of a very stable, pre-aged material that offers long-life reliability for HVAC control . The platinum RTD comes in 100Ω and 1000Ω versions . All sensors come with three-year warranty .
FEATURES• Economical• Stainless steel probes• Three-year warranty• Wide thermistor or RTD sensor selections• Simple traditional mounting
OPTIONS• Greenfield fittings• Plenum cable• 1/4" quick connects
SPECIFICATIONS
KTV3-QD-CP5
KTV3-GF
KTV3-QD
KTV3
Mounting KTV*Drill a 9⁄16" (1.43 cm) hole for probe insertion. Using the provided #6 screws, secure to the duct with the T-bar mounting ears.
WiringTerminate to controller directly with push-on quick connects or to terminals.
Basic model comes with 5' (1.5 m) of 24 AWG wire, 4.87" (12.38 cm) probe with T-bar, grommet, and #6 x 1 screws for direct duct mounting.
*Select sensor number on ordering information table.
MOUNTING/WIRING
NEW!TEMPERATURE
1200
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
3.88(9.89)
3.88(9.89)
4.87(12.38)
Standard 4.87(12.38)
Standard
0.25(0.64)
5' (1.52 m)wire or cable
Vinyl Grommet1/2" NPT
1.37(3.49)
Insertion Hole is9/16" (1.43 cm)
Vinyl Grommet
Greenfield Fitting
Duct temperature sensor withGreenfield fitting option (GF)
1/2" NPT
Basic Installation
in(cm)
DIMENSIONS
VAV BOX DUCT TEMPERATURE SENSORSKTV* SERIES
ORDERING INFORMATION
Example: KTV-3-N1 VAV duct sensor with 10,000Ω thermistor with Greenfield fittingKTV 3- GF
MODEL DESCRIPTION KTV VAV box duct temperature sensor SENSOR SELECTION 3 10,000Ω thermistor @ 77°F (25°C), Type III 21 2250Ω thermistor @ 77°F (25°C), Type II 22 3000Ω thermistor @ 77°F (25°C), Type II 24 10,000Ω thermistor @ 77°F (25°C), Type II 27 100,000Ω thermistor @ 77°F (25°C), Type II 42 20,000Ω thermistor @ 77°F (25°C), Type IV 63 1000Ω nickel RTD @ 32°F (0°C), 385 platinum curve (yellow leads) 81 100Ω RTD @ 32°F (0°C), 385 platinum curve (yellow leads) 85 1000Ω RTD @ 32°F (0°C), 385 platinum curve (blue leads) 91 1000Ω RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length 24 AWG jacketed cable XCP5 5' (1.2m) non-shielded 22AWG plenum cable XCP25 25' (7.6m) non-shielded 22AWG plenum cable XD Dual sensors in one probe XG Greenfield fitting (factory installed) XL Custom length insertion probes 1" to 60" XL2 in Custom length insertion probe, 2"(5.08 cm) XL9 Custom length insertion probe, 9"(22.86 cm) XLT Liquid-tight fitting (factory installed) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XW Weather resistant housing XZ Three wire RTD connections (Type 81 only) (Not with XC25, XCP25)
-
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!
1201
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .50°F (0 .4°C)Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curveTemperature Range -40° to 275°F (-40° to 135°C) Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C (power
needed to raise the temperature by 1°C)
Measurement Range -40° to 302°F (-40° to 150°C)Enclosure Galvanized metal boxWiring Terminations 10" of 22 AWG wire or terminal
stripApprovals CEWeight 4" 0 .6 lb (0 .27 Kg) 8" 0 .72 lb (0 .72 Kg) 12" 0 .9 lb (0 .41 Kg) 18" 1 .0 lb (0 .45 Kg)Warranty 5 years
in(cm)
0 .125 (0 .3)Foam
Insulation
4 5 .8 (14 .7)8 7 .8 (19 .8)12 11 .7 (30)18 17 .7 (45)
1 .9 (4 .9) 1 .9 (4 .9)
0 .90(2 .3)
SeeTable0 .76 (1 .9)
ACI/*-D/AV Duct/Averaging
DESCRIPTIONThe ACI Duct Series Thermistor and RTD Sensors are designed specifically for HVAC system temperature control . The duct sensors come in thermistor and RTD sensor curves compatible with most BAS systems available today . Duct sensors come with a foam-backed handy box and 8” probe .
The A/*D Duct Sensor should be mounted close to the center of the duct and penetrate through any duct insulation at least 1” (2 .5 cm) into the airflow . The probes are sensitive within 1” of the tip and insert through a 3/8” (1 cm) hole . Use standard metal screws to secure to the duct .
FEATURES• Five-year warranty• Wide selection of thermistor or RTD curves• Stainless steel probes
DIMENSIONS
DUCT TEMPERATURE SENSORSACI DUCT SERIES
SPECIFICATIONS
ORDERING INFORMATION
A/AN-D-8-G-D
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281UR Moisture-resistant three-wire butt splice 229
MODEL DESCRIPTIONA/AN-D-8-GD Duct mount 10 kΩ type III thermistor with 8" (20.3 cm) insertion (ACI/AN-D8)A/CP-D-8-GD Duct mount 10 kΩ type II thermistor with 8" (20.3 cm) insertion (ACI/CP-D8)A/20K-D-8-GD Duct mount 20 kΩ type IV thermistor with 8" (20.3 cm) insertion (ACI/20K-D8)A/100K-D-8-GD Duct mount 100 kΩ type II thermistor with 8" (20.3 cm) insertionA/100-2W-D-8-GD Duct mount 100Ω RTD 385 curve, two-wire with 8" (20.3 cm) insertion (ACI/100-2-D8)A/1K-2W-D-8-GD Duct mount 1 kΩ RTD 385 curve, two-wire with 8" (20.3 cm) insertion (ACI/1000-2-D8)
Handy Box Height8 12 18 4
AN 4.19 (10.6) 3.43 (8.71) 3.43 (8.71) 3.43 (8.71)CP 3.18 (8.07) 3.43 (8.71) 3.43 (8.71) 3.43 (8.71)20 3.43 (8.71) 3.43 (8.71) 3.43 (8.71) 3.43 (8.71)100K 3.43 (8.71) 3.43 (8.71) 3.43 (8.71) 3.43 (8.71)100 3.91 (9.93) 3.57 (9.06) 3.58 (9.09) 3.58 (9.09)1K 3.57 (9.06) 3.57 (9.06) 3.58 (9.09) 3.58 (9.09)
NEW!TEMPERATURE
1202
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .55°F (±0 .30°C)Sensor Type Thermistor 10 kΩ Type II & III RTD 100Ω, 1000Ω, 385 curve; 1000Ω,
375 curveTemperature Range 32° to 158°F (-0° to 70°C)Stability < 0 .036°F (0 .02°C) per year, 0 .14°C with
6,000 continuous hours at 400°CHeat Dissipation 2 .7 mW/°C (power need to raise the
temperature 1°C), 0 .4°C/mW at 0°CEnclosure/Weight NB No Box; 0 .5 lb (0 .23 Kg)
JB 2" x 4" J-box with 1/2" knockouts: 0 .65 lb (0 .29 Kg)
BB BAPI-Box - IP66 rated, UV-resistant polycarbonate; 0 .8 lb (0 .36 Kg)
BB2 BAPI-Box 2 - IP66 rated, UV-resistant polycarbonate; 0 .8 lb (0 .36 Kg)
BB4 BAPI Box 4 - IP44 Nylon & plastic; 0 .8 lb (0 .36 Kg)
WP NEMA 3R cast aluminum; 0 .8 lb (0 .36 Kg)
Mounting Directly to ductWiring Terminations 22 AWG wire, etched teflon leads Approvals CE, RoHSWarranty Lifetime
DESCRIPTIONThe BAPI BA Series Duct Thermistor and RTD Sensors are available in a variety of easy-to-mount installation types . They come in thermistor and RTD sensors and feature etched Teflon leadwires and encapsulated sensors to create a watertight package that can perform in the real world .
FEATURES
• ±0.36°F (±0.2°C) thermistor accuracy• ±0.27°F (±0.15°C) or ±0.54°F (±0.3°C) RTD• Lifetime limited sensor warranty• Wide selection of mounting styles
DUCT THERMISTOR AND RTD SENSORSBA/ DUCT SERIES
SPECIFICATIONS
BA/10K2-D3-JB
BA/10K2-D4-BB4
BA/10K2-D4-NB
BA/10K2-D4-BB2BA/10K2-D4-NB BA/10K2-D4-WP
DIMENSIONS
NEW!
1203
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATION
Example: BA/10K3-D8-JB BAPI 8" duct 10,000Ω thermistor sensor with JB box
BA/ 10K3 D8 JB
MODEL DESCRIPTION BA/ Probe temperature sensor REQUIRED SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type 2 10K3 10,000Ω thermistor @ 77°F (25°C), Type 3 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve 1K375 1000Ω RTD @32°F (0°C), 375 curve REQUIRED PROBE TYPE AND LENGTH D8 Duct mount with 8" probe (other lengths available 4", 12", 18") REQUIRED MOUNTING ENCLOSURE NB No box with 18" leads JB 2" x 4" J-box with 1/2" knockouts BB IP66 rated, UV resistant BB2 IP66 rated, UV resistant polycarbonate WP NEMA 3R weatherproof UV resistant enclosure
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
DUCT THERMISTOR AND RTD SENSORSBA/ DUCT SERIES
DIMENSIONS
BA/10K2-D4-BB BA/10K2-D4-BB4BA/10K2-D4-JB
NEW!TEMPERATURE
1204
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
Temperature Range -30° to 240°F (34° to 115°C)Sensor Type Type 5, 77 1000Ω ±0 .12% @ 70°F (21°C) Type 78 2000Ω ±0 .12% @ 70°F (21°C)
Sensitivity Type 5 2 .2Ω/°F @ 70°F (21°C) Type 77 2 .48Ω/°F @ 70°F (21°C) two red wires Type 78 4 .96Ω/°F @ 70°F (21°C) two gray wiresWarranty 1 year
DESCRIPTIONThe Kele Wire Wound Nickel-Iron Balco RTD Sensors are installed in rugged housings to measure the most important HVAC applications . The Duct and Immersion Sensors all have 304 stainless steel probes for use in almost any area .
The Immersion Probe comes with a standard brass or optional stainless steel thermowell .
The Duct Sensor has mounting tabs for direct mounting on a duct or installation in a handibox .
The Outdoor Sensor, rated for outdoor temperatures, is equipped with a sun shield and weatherproof box for mounting under the eaves or another sheltered area .
The Type 78 and 77 Raw Sensors are mounted in a 2" (5 cm) long aluminum case with teflon insulated lead wires . This sensor can be used for strap-on applications . The Type 5 raw sensor is mounted in a 2 .5" (6 .35 cm) PVC case .
The Universal Sensor may be used for duct, immersion, and OSA temperature sensing .
NICKEL-IRON / BALCO RTD IMMERSION, DUCT & OUTDOOR SENSORSTYPE 5, 77, 78 UNIVERSAL DUCT, IMMERSION, OSA
SPECIFICATIONS
ST-O
ST-D 5 XW Example: ST-D5-XW 1000Ω Balco duct sensor with a weatherproof housing
MODEL DESCRIPTIONST-R Raw sensorST-U Universal duct, immersion, or OSA sensorST-D Duct sensorST-W Immersion sensor with brass wellST-O Outdoor air sensor RTD SENSOR TYPE 5 1000Ω nickel-iron, Balco sensor 77 1000Ω nickel-iron, Balco sensor 78 2000Ω nickel-iron, Balco sensor OPTIONS XW Weather resistant housing (factory installed ST-D and ST-W only) XH Handy-box (factory installed ST-D and ST-W only) E Immersion sensor without well (ST-W only) S Stainless steel thermowell (ST-W and ST-U only) O Kit with OSAB weather shield (ST-U only) B WEL-B brass well (ST-U only)
ST-R5
ST-U
ST-D
ST-W
WEL-B
RELATED PRODUCTS PAGEF-1000-331 Nylon bushing for open wiring 908OSAB OSA weather shield, gasket, and bracket 1226T5U-XR 1000 ohm Nickel, 4-20 mA temperature transmitter, custom rangeable 1283TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298WEL-B Brass well 1294WEL-S 304 stainless steel well 1294
NEW!
1205
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F(0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)
Heat Dissipation 2 .7 mW/°C (power needed to raise the temperature 1°C)
Mounting Ductly to duct, wall or customer supplied back box, no adapters needed for standard box
Wiring Terminations 8' (2 .44m) of 24 AWG wire leads, Type 81 sensors have 18" (0 .45m) leads
Probe Seamless 304 stainless steel tube, 1/4" OD
Approvals CEWeight 0 .2 lb (0 .09 kg) w/o optionsWarranty 3 years
ALL-PURPOSE THERMISTOR AND RTD SENSORSKTA* SERIES
DESCRIPTIONThe Kele KTA* Series All-Purpose Thermistor and RTD Sensors provide remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is made of a highly stable thermistor material or platinum RTDs .
The KTA* Series sensors are rugged, point-sensitive waterproof sensors featuring a 9" (22 .8 cm) 304 stainless steel probe and brass fitting . The brass fitting has a 1/2" NPT male thread . The sensors are supplied with two 1/2" locknuts for easy installation in handy boxes (or other enclosures with 1/2" knockouts) .
FEATURES• Three-year warranty• Wide selection of thermistor and RTD curves• Tip sensitive for precise temperature response• All metal construction with 304 stainless steel probes• Easy to mount to duct, wall, or back box• Waterproof probe
APPLICATIONThe KTA* Series Sensors are waterproof and can be used where it is possible for the sensed temperature to fall below the ambient dew point, causing condensation to occur on the sensor . However, it is important that the field connection be made as far as possible from the sensed media . The sensing element is sealed with a thermally conductive compound in a versatile 9" long stainless steel tube with a brass electrical fitting . The all-purpose probe is suitable for plenum mounting, duct mounting, immersion wells, or outside air .
SPECIFICATIONS
KTA*
NEW!TEMPERATURE
1206
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Locknuts provide direct mounting and can be used where conduit is not required. Mount directly to electrical outlet boxes as shown below.
All-Purpose Sensor withCustomer-Supplied Handy Box
Secure sensor to handy box with locknuts.Secure handy box to duct with screws.
Hole 1-1/16"(2.7 cm)
Basic model comes with two locknuts for mounting to a variety of box options.
8.25(20.96)
0.25(0.64)
9.25(23.51)
1.0(2.54)
1.0(2.54)
0.83(2.06)
1.5(3.81)
Typical Insertion
1/2" NPT Thread
in(cm)
MOUNTING DIMENSIONS
KELE ALL-PURPOSE THERMISTOR AND RTD SENSORKTA* SERIES
ORDERING INFORMATION
KTA24 XP Example: KTA24-XP 10,000Ω Type II all-purpose temperature sensor with matched sensor
MODEL DESCRIPTION KTA3 10,000Ω all-purpose thermistor @ 77°F (25°C), Type III (gray leads)KTA21 2252Ω all-purpose thermistor @ 77°F (25°C), Type II (green leads)KTA22 3000Ω all-purpose thermistor @ 77°F (25°C), Type II (blue leads)KTA24 10,000Ω all-purpose thermistor @ 77°F (25°C), Type II (yellow leads)KTA27 100,000Ω all-purpose thermistor @ 77°F (25°C), Type II (gray leads)KTA42 20,000Ω all-purpose thermistor @ 77°F (25°C), Type IV (green leads)KTA81 100Ω all-purpose RTD @ 32°F (0°C), 385 platinum curve (yellow leads)KTA85 1000Ω all-purpose RTD @ 32°F (0°C), 385 platinum curve (blue leads)KTA91 1000Ω all-purpose RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS QD¼ Nylon insulated Quick Disconnect ¼" X25 25’ (7.6) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCO ½" LB condulet fitting XCP25 25' Non-shielded plenum cable XD Dual sensors in one probe XH Handy box housing (factory installed) XHP Non-metallic handy box housing (factory installed) XL Custom length insertion probes 1" to 108" XL2 Custom length insertion probe, 4-7/8" (12.38 cm) XL2 in Custom length insertion probe, 2" (5.08 cm) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XW Weather resistant housing (factory installed) XZ Three wire RTD connections (optional only on Type 81, not available with XC25 and XCP25)
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!
1207
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Mounting Directly to duct, wall, or
customersupplied back box, no adapters needed for standard boxes
Wiring Terminations 8' (2 .4m) of 24 AWG pigtails with prestripped ends, type 71 & 81 have 18" leads
Approvals CEWeight 0 .2 lb (0 .09 kg) w/o optionsWarranty Lifetime
ALL-PURPOSE THERMISTOR AND RTD SENSORSST-A* SERIES
DESCRIPTIONThe Precon ST-A* Series All-Purpose Thermistor and RTD Sensors provide precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is made of a highly stable precision thermistor material or platinum RTDs .
The ST-A* Series sensors are rugged, point-sensitive waterproof sensors featuring a 9" (22 .8 cm) 304 stainless steel probe and brass fitting . The brass fitting has a 1/2" NPT male thread . The sensors are supplied with two 1/2" locknuts for easy installation in handy boxes (or other enclosures with 1/2" knockouts) .
FEATURES• Lifetime warranty• Wide selection of thermistor and RTD curves• Tip sensitive for precise temperature response• Adaptable with many options• All metal construction with 304 stainless steel probe • Easy to mount to duct, wall, or back box• Waterproof probe
TM
APPLICATIONThe ST-A* Series Sensors are waterproof and can be used where it is possible for the sensed temperature to fall below the ambient dew point, causing condensation to occur on the sensor . However, it is important that the field connection be made as far as possible from the sensed media . The sensing element is sealed with a thermally conductive compound in a versatile 9" long stainless steel tube with a brass electrical fitting . The all-purpose probe is suitable for plenum mounting, duct mounting, immersion wells, or outside air .
SPECIFICATIONS
ST-A*
NEW!TEMPERATURE
1208
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Locknuts provide direct mounting and can be used where conduit is not required. Mount directly to electrical outlet boxes as shown below.
All-Purpose Sensor withCustomer-Supplied Handy Box
Secure sensor to handy box with locknuts.Secure handy box to duct with screws.
Hole 1-1/16"(2.7 cm)
Basic model comes with two locknuts for mounting to a variety of box options.
8.25(20.96)
0.25(0.64)
9.25(23.51)
1.0(2.54)
1.0(2.54)
0.83(2.06)
1.5(3.81)
Typical Insertion
1/2" NPT Thread
in(cm)
MOUNTING DIMENSIONS
ALL-PURPOSE THERMISTOR AND RTD SENSORSST-A* SERIES
ORDERING INFORMATION
ST-A24 XP Example: ST-A24-XP 10,000Ω Type II all-purpose temperature sensor with matched sensor
MODEL DESCRIPTION ST-A3 10,000Ω all-purpose thermistor @ 77°F (25°C), Type III (gray leads)ST-A21 2252Ω all-purpose thermistor @ 77°F (25°C), Type II (green leads)ST-A22 3000Ω all-purpose thermistor @ 77°F (25°C), Type II (blue leads)ST-A24 10,000Ω all-purpose thermistor @ 77°F (25°C), Type II (yellow leads)ST-A27 100,000Ω all-purpose thermistor @ 77°F (25°C), Type II (gray leads)ST-A42 20,000Ω all-purpose thermistor @ 77°F (25°C), Type IV (green leads)ST-A63 1000Ω nickel all purpose RTD @ 70°F (21°C), (yellow leads)ST-A71 100Ω ultra high accurate all purpose RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-A81 100Ω all-purpose RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-A85 1000Ω all-purpose RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-A91 1000Ω all-purpose RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS QD¼ Nylon insulated Quick Disconnect ¼" X25 25’ (7.6) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCO ½" LB condulet fitting XCP25 25' Non-shielded plenum cable XD Dual sensors in one probe XH Handy box housing (factory installed) XHP Non-metallic handy box housing ( factory installed) XL Custom length insertion probes 1" to 108" XL2 Custom length insertion probe, 4-7/8"(12.38 cm) XL2 in Custom length insertion probe, 2"(5.08 cm) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XW Weather resistant housing (factory installed) XZ Three wire RTD connections (optional only on Type 81, standard on Type 71, not available with XC25 and XCP25)
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277UR Moisture-resistant three-wire butt splice 229
NEW!
1209
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum) Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Enclosure Metal, weather resistantMounting 1/2" conduit fitting directly to duct or
wallWiring Terminations 8', 24 AWG wire leads, type 81
sensors have 18" leadsProbe Seamless 304 stainless steel tube,
1/4" ODApprovals CEWeight KTWNB 0 .65 lb (0 .30 kg) standard w/o
options KTW 1 .1 lb (0 .5 Kg) w/o optionsWarranty 3 years
IMMERSION THERMISTOR AND RTD SENSORSKTW* SERIES
DESCRIPTIONThe Kele KTW* Immersion Thermistor and RTD Sensors are designed to be cost-effective with accuracies of ±0 .5°F (±0 .28°C) . Each sensor is constructed for easy installation with any building automation system (BAS) . The thermistor is made of a very stable, pre-aged material that offer long-life reliability for HVAC control . The platinum RTD comes in 100Ω and 1000Ω versions . All sensors come with a three-year warranty .
FEATURES• Economical• Metal enclosures with stainless steel probes• Three-year warranty• ±0.5°F (±0.28°C) accuracy• Wide selection of thermistor or RTD sensors
APPLICATIONThe KTW Series Sensors are waterproof and feature a 304 stainless steel probe and brass fitting . The fitting has 1/2" NPSM female threads to accept the standard Greenfield fitting . It also has 1/8" NPSM male threads for installing into an optional Model WEL-B thermowell . The thermowells are designed with close tolerances, eliminating the need for thermal grease under normal conditions . Each well is designed so that the sensor assembly can be easily removed after installation . The well screws into a 1/2" FNPT saddle (or Thredolet® fitting) furnished by the installing contractor .
OPTIONS• 304 stainless steel well, maximum temperature 900°F
(482°C), maximum pressure 3000 psig (20,685 kPa)• Handy-box enclosure• Custom lengths (wells available)• 1/2" LB conduit fitting• Liquid-tight fitting• Weather resistant box• Matched pairs used for BTU measurement• NIST Traceable
SPECIFICATIONS
KTW3
KTWNB3-LTKTWNB3
KTW3-W
NEW!TEMPERATURE
1210
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
FlowFlow
Angle must not allow end of well to contact the other side of pipe.
Install the wells as shown to obtainoptimum well strength.
MountingInstall well into customer-supplied 1/2" FNPT saddle (or Thredolet®). Screw sensor into the well via the 1/8" NPSM brass fitting.
WiringTerminate with butt splice or soldering. Wire nuts are not recommended.
in(cm)
KTW*
4.0 (10.2)
1.70(4.3)
4.87(12.38)
0.25 (0.63)
5.13(13.03) 3.25
(8.26)
1/2" NPT
WEL-B
MOUNTING DIMENSIONS
IMMERSION THERMISTOR AND RTD SENSORSKTW* SERIES
ORDERING INFORMATION
MODEL DESCRIPTION KTW Well immersion temperature sensor KTWNB Well immersion temperature sensor with no box SENSOR SELECTION 3 10,000Ω thermistor @ 77°F (25°C), Type III 21 2252Ω thermistor @ 77°F (25°C), Type II 22 3000Ω thermistor @ 77°F (25°C), Type II 24 10,000Ω thermistor @ 77°F (25°C), Type II 27 100,000Ω thermistor @ 77°F (25°C), Type II 42 20,000Ω thermistor @ 77°F (25°C), Type IV 81 100Ω RTD @ 32°F (0°C), 385 platinum curve (yellow leads) 85 1000Ω RTD @ 32°F (0°C), 385 platinum curve (blue leads) 91 1000Ω RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS B WEL-B brass well included QD¼ Nylon insulated quick disconnect ¼" S WEL-S 304 stainless steel well included X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCO ½" LB condulet fitting XCP25 25' non-shielded plenum cable XD Dual sensors in one probe XHP Non-metallic handy box housing ( factory installed) XL Custom length insertion probes 1" to 60" XL2 in Custom length insertion probe, 2"(5.08 cm)(Specify E without well) XL9 Custom length insertion probe, 9"(22.86 cm)(Specify E without well) XLT Liquid-tight fitting (factory installed) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XNB ½" MNPT brass close nipple (not available with KTW) XNG No Greenfield fitting(½" NPSM threads) (not available with KTW) XNP ½" MNPT plastic close nipple (not available with KTW) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, all thermistors, ±0.135˚F (0.075˚C) XW Weather resistant housing (not available with KTWNB) XZ Three wire RTD connections(Type 81 only) (Not with XC25, XCP25)
Example: KTW-3-B Immersion sensor with 10,000Ω thermistor and brass wellKTW 3 B
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229WEL-B Brass well 1294WEL-S 304 stainless steel well 1294
NEW!
1211
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Mounting Directly to pipe in supplied brass
well, no adapters needed for standard boxes, customer-supplied 1/2" Thredolet® required in pipe
Wiring Terminations 8' (2 .44 m) of 24 AWG pigtails with prestripped ends, type 71 & 81 have 18" leads
Approvals CEWeight 0 .65 lb (0 .3 kg) w/o wellWarranty Lifetime
IMMERSION THERMISTOR AND RTD SENSORSST-W* SERIES
DESCRIPTIONThe PreCon Model ST-W* Immersion Thermistor and RTD Sensor provides precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is a highly stable precision thermistor material or platinum RTD .
The sensing element is sealed with a temperature conductive compound in a 4-7/8" (12 .4 cm) stainless steel tube and brass fitting . A brass thermowell is the standard well provided with each sensor . A Greenfield connector is factory installed for flexible connection . The sensor probe assembly is removable from the thermowell for replacement without draining the system .
FEATURES
• Lifetime warranty• ±0.36°F (±0.2°C) thermistor accuracy• ±1°F (0.53°C) RTD accuracy• Wide selection of thermistor and RTD curves• Brass thermowell for quick temperature response• Adaptable with many options• Easy to mount and remove from thermowell• Waterproof stainless steel probe
TM
APPLICATION
The Model ST-W* is a waterproof sensor featuring a 304 stainless steel probe and brass fitting . The fitting has a 1/2" NPT female threads to accept the standard Greenfield fitting . It has 1/8" NPT male threads for installing into a furnished WEL-B thermowell . The thermowells are designed with close tolerances, eliminating the need for thermal grease under normal conditions . Each well is designed so that the sensor assembly can be easily removed after installation . The well screws into a 1/2" NPT saddle (or Thredolet® fitting) furnished by the installing contractor .
OPTIONS• 304 stainless steel well, maximum temperature 900°F
(482°C),maximum pressure 3000 psig (20,685 kPa)• Handy-box enclosure• Custom lengths (wells available)• 1/2" LB conduit fitting• Liquid-tight fitting• Weather resistant box• Matched pairs used for BTU measurement• NIST Traceable
SPECIFICATIONS
TCC-12
WEL-B ST-W24
NEW!TEMPERATURE
1212
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
FlowFlow
Angle must not allow end of well to contact the other side of pipe.
Install the wells as shown to obtainoptimum well strength.
MountingInstall well into customer-supplied 1/2" FNPT saddle (or Thredolet®). Screw sensor into the well via the 1/8" NPSM brass fitting.
WiringTerminate with butt splice or soldering. Wire nuts are not recommended. 1/2" NPT
5.13(13.03) 3.25
(8.26)
4.87(12.38)
0.25 (0.63)
1.37(3.49)
(XL)
1/8" NPSM
Sensor
Sensor in Well
GreenfieldFittingin
(cm)
MOUNTING DIMENSIONS
IMMERSION THERMISTOR AND RTD SENSORSST-W* SERIES
ORDERING INFORMATION
ST-W3 S XP Example: ST-W3-S-XP 10,000Ω Type III immersion sensor with a matched 10,000Ω Type III immersion sensor and stainless steel well
MODEL DESCRIPTIONST-W3 10,000Ω immersion thermistor @ 77°F (25°C), Type III (gray leads)ST-W21 2252Ω immersion thermistor @ 77°F (25°C), Type II (green leads)ST-W22 3000Ω immersion thermistor @ 77°F (25°C), Type II (blue leads)ST-W24 10,000Ω immersion thermistor @ 77°F (25°C), Type II (yellow leads)ST-W27 100,000Ω immersion thermistor @ 77°F (25°C), Type II (gray leads)ST-W42 20,000Ω immersion thermistor @ 77°F (25°C), Type IV (green leads)ST-W63 1000Ω nickel immersion RTD @ 70°F (21°C), (yellow leads)ST-W71 100Ω ultra high accurate immersion RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-W81 100Ω immersion RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-W85 1000Ω immersion RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-W91 1000Ω immersion RTD @ 32°F (0°C), 375 platinum curve (green leads) WELL DESIGNATION – Sensor with standard brass well E Sensor without well S Sensor with stainless steel well 900°F (482°C) max temp, 3000 psig (20.7 kPa) max pressure OPTIONS QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCO ½" LB condulet fitting XCP25 25' non-shielded plenum cable XD Dual sensors in one probe XH Handy box housing (factory installed) XHP Non-metallic handy box housing ( factory installed) XL Custom length insertion probes 1" to 108"(Specify E without well) XL2 in Custom length insertion probe, 2"(5.08 cm)(Specify E without well) XL9 Custom length insertion probe, 9"(22.86 cm)(Specify E without well) XLT Liquid-tight fitting (factory installed) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XNB ½" MNPT brass close nipple XNG No Greenfield fitting(½" NPSM threads) XNP ½" MNPT plastic close nipple XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, all thermistors, ±0.135˚F (0.075˚C) XW Weather resistant housing XZ Three wire RTD connections (Optional only on Type 81, standard on Type 71, not available for use with XC25 & XCP25 options)
RELATED PRODUCTS PAGETCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
NEW!
1213
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .50°F (0 .4°C)Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curveTemperature Range -40° to 302°F (-40° to 150°C)Stability Thermistor ±0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C (power
needed to raise the temperature by 1°C)Enclosure Galvanized metal boxWiring Terminations 10” of 22 AWG wire or terminal stripApprovals RoHS CEWeight 1 .0 lb (0 .45 Kg)Warranty 5 years
ORDERING INFORMATION
IMMERSION THERMISTOR AND RTD SENSORSACI IMMERSION SERIES
in(cm)
A/*-I-X-GDImmersion
1/2" ConduitKnockouts
1/2" Male NPTNylon Fitting
1/2" MaleNPT Threads
4 .0(10 .6)
5 .5(14 .0)
2 .9(5 .9)
1 .8(4 .8)
0 .25 (0 .64)
DESCRIPTIONThe ACI Immersion Series Thermistor and RTD Immersion Sensors are designed specifically for HVAC system temperature control . The immersion sensors come in thermistor and RTD sensor curves compatible with most BAS systems available today .
The ACI Immersion Sensor threads into a 1/2" (1 .27 cm) well (included), which is secured into the pipe to a customer-supplied 1/2" saddle or Thredolet® . The probe is tight fitting for accurate readings . Faster response can be achieved by using TCC-12 thermal conductive compound at the bottom of the well .
FEATURES
• Five-year warranty• Wide selection of thermistor or RTD curves• Stainless steel probes
DIMENSIONSSPECIFICATIONS
MODEL DESCRIPTIONA/AN-I-4-GD Immersion 10 kΩ type III thermistor with well and 4” (10.1 cm) insertionA/CP-I-4-GD Immersion 10 kΩ type II thermistor with well and 4” (10.1cm) insertionA/20K-I-4-GD Immersion 20 kΩ type IV thermistor with well and 4” (10.1 cm) insertionA/100-2W-I-4-GD Immersion 100Ω RTD 385 curve with well and 4” (10.1 cm) insertionA/1K-2W-I-4-GD Immersion 1 kΩ RTD 385 curve with well and 4” (10.1 cm) insertion
A/AN-I-4-GD
RELATED PRODUCTS PAGEACI/4 ACI brass thermowell T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1214
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .55°F (0 .30°C)Sensor Type Thermistor 10 kΩ Type II & III RTD 100Ω, 1000Ω, 385 curve; 1000Ω, 375 curveTemperature Range 32° to 158°F (-0° to 70°C)Stability Thermistor <0 .036°F (0 .02°C) per year RTD 0 .14°C with 6,000 continuous
hours at 400°CHeat Dissipation 2 .7 mW/°C (power need to raise the
temperature 1°C), 0 .4°C/mW at 0°C
Enclosure JB 2" x 4" J-box with 1/2" knockouts BB BAPI-Box Enclosure - IP66 rated,
UV-resistant polycarbonate BB2 BAPI-Box 2 Enclosure - IP66 rated,
UV-resistant polycarbonate BB4 BAPI Box 4- IP20 nylon & plastic WP NEMA 3R AluminumMounting Directly to pipeWiring Terminations 22 AWG wire, etched teflon leads Approvals CE, RoHSWeight I2 0 .65 lb (0 .29 Kg) I4 & I8 0 .8 lb (0 .36 Kg)Warranty Lifetime
IMMERSION THERMISTOR AND RTD SENSORSBA/ IMMERSION SERIES
DESCRIPTIONThe BAPI BA Series Thermistor and RTD Immersion Sensors are designed specifically for HVAC systems . They come in thermistor and RTD sensors and feature double encapsulated sensor etched Teflon leadwires to create a watertight package that can perform in the real world .
FEATURES• ±0.36°F (±0.2°C) thermistor accuracy• ±0.27°F (±0.15°C) or ±0.54°F (±0.3°C) RTD• Lifetime limited sensor warranty• Wide selection of mounting styles
DIMENSIONS
SPECIFICATIONS
BA/10K2-I8-JB
BA/10K2-I4-BB2
BA/10K2-I2-BB4
BA/10K2-I8-BB2
BA/10K2-I8-BB
NEW!
1215
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
IMMERSION THERMISTOR AND RTD SENSORSBA/ IMMERSION SERIES
ORDERING INFORMATION
Example: BA/10K3-I8-JB BAPI 8" immersion10,000Ω thermistor sensor with JB box
BA/ 10K3 I8 JB
MODEL DESCRIPTION BA/ Probe temperature sensor REQUIRED SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type II 10K3 10,000Ω thermistor @ 77°F (25°C), Type III 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve 1K375 1000Ω RTD @32°F (0°C), 375 curve REQUIRED PROBE TYPE AND LENGTH I2 Immersion probe 2" long, 1/2" well thread Order BA/2 well seperately I4 Immersion probe 4" long, 1/2" well thread Order BA/4 well seperately I8 Immersion probe 8" long, 1/2" well thread Order BA/8 well seperately REQUIRED MOUNTING ENCLOSURE NB No box with 18" leads JB 2" x 4" J-box with 1/2" knockouts BB NEMA 4 weatherproof, UV resistant plastic BB2 BAPI-Box 2 enclosure - IP66 rated, UV resistant polycarbonate WP NEMA 3R weatherproof enclosure
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277BA/2 2" BAPI stainless steel wellBA/4 4" BAPI stainless steel wellBA/8 8" BAPI stainless steel well
DIMENSIONS
BA/10K2-I8-BB4
BA/10K2-I8-JB
BA/10K2-I8-WP
NEW!TEMPERATURE
1216
NEW!TEMPERA
TURE
20
NEW!
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
OSA THERMISTOR AND RTD SENSORSKTO* SERIES
DESCRIPTION
The Kele KTO* OSA Thermistor and RTD Sensors are designed to be cost-effective with accuracies of ±0 .5°F (±0 .28°C) . Each uses metal enclosures and is constructed for easy installation with any building automation system (BAS) . The thermistor is made of a very stable, pre-aged material that offers long-life reliability for HVAC control . The platinum RTD comes in 100Ω and 1000Ω versions . All sensors come with a three-year warranty .
FEATURES
• Metal enclosures with plastic weather shield• Three-year warranty• ±0.5°F (±0.28°C) accuracy
in(cm)
Foam GasketStainlessSheathedSensor
2.0(5.08)
2.88(7.30)
4.63(11.75)
6.13(15.56)
1.5(3.81)
KTO*
Mounting KTO*Toggle bolts or other direct wall-mount screws can be used for outside mounting. For conduit connections, 3/4" NPT threadsare available in the back and side.
Do not mountsensor in verticalposition withthe weathershield pointing up.Correct position for mounting
outdoor air sensor
3/4" NPTSide and rear
Use AD-2 adaptor
for 1/2" NPT applications
Shaded side of building
Preferred mounting locationfor outdoor air sensor
For best results, do not mount above doors, windows, air intakes, or exhausts.
MOUNTINGDIMENSIONS
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise the
temperature 1°C)Enclosure Metal, weather resistantMounting 3/4" conduit fittingsWiring Terminations 8', 24 AWG wire leads, type 81 sensors
have 18" leadsApprovals CEWeight 0 .75 lb (0 .3 kg) with no optionsWarranty 3 years
SPECIFICATIONS
KTO3
ORDERING INFORMATION
MODEL DESCRIPTION KTO3 OSA temperature sensor, 10,000Ω thermistor Type IIIKTO21 OSA temperature sensor, 2252Ω thermistor Type IIKTO22 OSA temperature sensor, 3,000Ω thermistor Type IIKTO24 OSA temperature sensor, 10,000Ω thermistor Type IIKTO27 OSA temperature sensor, 100,000Ω thermistor Type IIKTO42 OSA temperature sensor, 20,000Ω thermistor Type IVKTO81 OSA temperature sensor, 100Ω RTD 385 platinum curve (yellow leads)KTO85 OSA temperature sensor, 1,000Ω RTD 385 platinum curve (blue leads)KTO91 OSA temperature sensor, 1,000Ω RTD 385 platinum curve (green leads) OPTIONS X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCP25 25' Non-shielded plenum cable XD Dual sensors in one probe XG Greenfield fitting (factory installed) XLT Liquid-tight fitting (factory installed) XMT Mounting tabs XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XTB Terminal block XZ Three wire RTD connections(optional only on Type 81, standard on Type 71, not available with XC25 & XCP25 options)
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277AD-2 Knock-out adapter -3/4in TO 1/2in
NEW!
1217
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Enclosure Metal, weather resistantMounting Directly to wall with screws or toggle
boltsWiring Terminations 8' (2 .4m) of 24 AWG pigtails with
prestripped ends, type 71 & 81 have 18" leads
Approvals CEWeight 0 .75 lb (0 .3 kg) with no optionsWarranty Lifetime
OUTSIDE AIR THERMISTOR AND RTD SENSORST-O* SERIES
2.88(7.30)
4.63(11.75)
2.0(5.08)
1.5(3.81)
5.5(13.97)
StainlessSheathedSensor
Foam Gasket
in(cm)
DESCRIPTIONThe PreCon Model ST-O* Outside Air Thermistor and RTD Sensor provides precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is a highly stable precision thermistor material or platinum RTD . The temperature-sensitive element is sheathed in a stainless steel tube and mounted inside a ventilated, treated, white PVC shield to minimize radiant energy and weather related effects . The weather shield is mounted on a weather resistant outlet box for easy installation on an protected outdoor surface . This rugged enclosure will assure a long life, even under extreme weather conditions .
FEATURES• Lifetime warranty• Vented weather shield for quick temperature response• Moistureproof with 8 ft (2.4m) lead• Weather resistant enclosure• Ultra high accuracy optional
TM
APPLICATIONThe ST-O* Outside Air Sensor is ideal for measuring outdoor ambient air temperatures . It comes with a weather resistant enclosure that should be shielded from direct exposure to the elements on the shaded side of the building . For best results do not mount above doors, windows, air intakes, or exhausts .
DIMENSIONS
SPECIFICATIONS
ST-O*
NEW!TEMPERATURE
1218
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
MountingToggle bolts or other direct wall mount screws can be used for outside mounting. For conduit connections, 3/4" NPT threadsare available in the back and side. WiringTerminate using the full 8' (2.44m) lead length provided to avoid moisture migration from the field connection. Solder the leads where possible or use crimp-type butt splice. Wire nuts are not recommended.
Correct Position forMounting OutdoorAir Sensor.
3/4" NPTSide and Rear
Shaded side of building
Preferred Mounting Location for Outdoor Air Sensor
Do not mount sensor in vertical position with thesun shield pointing up.
For best results do not mount above doors, windows, air intakes, or exhausts.
(Use AD-2for 1/2" application)
MOUNTING
OUTSIDE AIR THERMISTOR AND RTD SENSORST-O* SERIES
ORDERING INFORMATION
MODEL DESCRIPTION ST-O3 OSA temperature sensor, 10,000Ω thermistor Type IIIST-O21 OSA temperature sensor, 2250Ω thermistor Type IIST-O22 OSA temperature sensor, 3,000Ω thermistor Type IIST-O24 OSA temperature sensor, 10,000Ω thermistor Type IIST-O27 OSA temperature sensor, 100,000Ω thermistor Type IIST-O42 OSA temperature sensor, 20,000Ω thermistor Type IVST-O63 1000Ω nickel OSA RTD @ 70°F (21°C), (yellow leads)ST-O71 100Ω ultra high accurate OSA RTD @ 32° (0°C), 385 platinum curve (blue leads)ST-O81 100Ω OSA temperature sensor RTD @ 32°F (0°C) 381 platinum curve (yellow leads)ST-O85 1000Ω OSA temperature sensor RTD @ 32°F (0°C) 385 platinum curve (blue leads)ST-O91 1000Ω OSA temperature sensor RTD @ 32°F (0°C) 375 platinum curve (green leads) OPTIONS X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCP25 25' Non-shielded plenum cable XD Dual sensors in one probe XG Greenfield fitting (factory installed) XLT Liquid-tight fitting (factory installed) XMT Mounting tabs XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XTB Terminal block XZ Three wire RTD connections(optional only on Type 81, standard on Type 71, not available with XC25 & XCP25 options)
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277AD-2 Knock-out adapter -3/4in TO 1/2in
NEW!
1219
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C), Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Sensor Type Thermistor 2 .252kΩ, 3kΩ, 10kΩ Type II & III,
20kΩ, 100kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω PT 375 Curve
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Enclosure White plasticMounting Directly to wallWiring Terminations 8', 24 AWG wire leads, type 81
sensors have 18" leadsProbe Seamless 304 stainless steel tube
with 1 .5" (3 .8 cm) diameter weather shield
Approvals CEWeight 0 .25 lb (0 .11 kg) w/o optionsWarranty 3 years
KTOSA*Outside Air Sensor
in(cm)
3.30(8.38)
2.50 (6.35)4.10 (10.4)
1/2" Conduit Hole*(face down)
1/2" Conduit Hole*(face down)
*Must face down to maintain water-tight integrity
RemoveableSensor Cover
MountingTabs (2)
MountingTabs (2)1.30 (3.30)
3.20 (8.12)
2.50(6.35)
MountingBox
DESCRIPTIONThe Kele KTOSA* Series OSA Temperature Thermistor and RTD Sensors are very economical and are specifically designed for HVAC applications . The mounting styles are based on proven techniques for installation efficiency and use stainless steel probes for durability . The sensors come with a three year warranty and are made with the highest quality material that offers the reliability needed in HVAC systems .
FEATURES
• Economical• Proven mounting designs• Three-year warranty• NEMA 3R enclosure APPLICATION
The KTOSA* Series Sensors are used for outside air temperature sensing . The design allows for two-point mounting . The weather shield protects the encapsulated sensor probe from the effects of rain, sleet, and snow .
DIMENSIONS
SPECIFICATIONS
KTOSA*
OSA THERMISTOR AND RTD SENSORSKTOSA* SERIES
NEW!TEMPERATURE
1220
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
MODEL DESCRIPTION KTOSA3 OSA temperature sensor, 10,000Ω thermistor Type IIIKTOSA21 OSA temperature sensor, 2250Ω thermistor Type IIKTOSA22 OSA temperature sensor, 3,000Ω thermistor Type IIKTOSA24 OSA temperature sensor, 10,000Ω thermistor Type IIKTOSA27 OSA temperature sensor, 100,000Ω thermistor Type IIKTOSA42 OSA temperature sensor, 20,000Ω thermistor Type IVKTOSA81 OSA temperature sensor, 100Ω RTD 385 platinum curve (yellow leads)KTOSA85 OSA temperature sensor, 1,000Ω RTD 385 platinum curve (blue leads)KTOSA91 OSA temperature sensor, 1,000Ω RTD 375 platinum curve (green leads) OPTIONS QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length 24 AWG jacketed cable XCP25 25' (7.6m) non-shielded 22AWG plenum cable XD Dual sensors XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XZ Three wire RTD connections (Type 81 only) (Not with XC25, XCP25)
OSA THERMISTOR AND RTD SENSORSKTOSA* SERIES
NEW!
1221
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F(0 .2°C) RTD ±0 .5°F (0 .4°C) Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curveTemperature Range -40° to 302°F (-40° to 150°C)Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C (power
needed to raise the temperature by 1°C)
Enclosure PlasticWiring Terminations 10" of 22 AWG wire or terminal
stripApprovals CE, RoHsWeight 0 .68 lb (0 .31 Kg)Warranty 5 years
ORDERING INFORMATION
A/*-O
Outside Air
0 .18 (0 .46)O .D . Ref . (2)
2 .25(5 .71)
3 .60 (9 .14)
3 .75 (9 .52)
Top View Side View
5 .00(12 .7)
0 .85(2 .16)
PG11 0 .5 (1 .27)NPT Knockouts (4)
in(cm)
DESCRIPTIONThe ACI Series OSA Thermistor and RTD Sensors are designed specifically for HVAC system temperature control . The OSA sensors come in thermistor and RTD sensor curves compatible with most BAS systems available today . OSA sensors mount in a NEMA 4 box with weather shield and easy-mount tabs .
The ACI OSA Sensor should be located on an outside wall facing north in the northern hemisphere . Using the tabs on the box, mount to the exterior wall using screws appropriate for the wall construction .
FEATURES• ±0.36°F (0.2°C) accuracy• Five-year warranty• Wide selection of thermistor or RTD curves• Stainless steel probes• Weather tight Housing
DIMENSIONS
OSA THERMISTOR AND RTD SENSORSACI OSA SERIES
MODEL DESCRIPTIONA/AN-O OSA Temperature sensor 10 kΩ type III thermistorA/CP-O OSA Temperature sensor 10 kΩ type II thermistorA/20K-O OSA Temperature sensor 20 kΩ type IV thermistorA/100-2W-O OSA Temperature sensor 100Ω RTD 385 curveA/1K-2W-O OSA Temperature sensor 1 kΩ RTD 385 curve
A/AN-O
SPECIFICATIONS
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1222
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .55°F (0 .30°C)Sensor Type Thermistor 10kΩ Type II & III RTD 100Ω, 1000Ω, 385 curve; 1000Ω,
375 curveTemperature Range 32° to 158°F (-0° to 70°C)Stability Thermistor < 0 .036 F (0 .02C) per year RTD 0 .14°C with 6,000 continuous hours
at 400°CHeat Dissipation Thermistor 2 .7 mW/°C (power need to raise
the temperature 1°C) RTD 0 .4°C/mW at 0°CEnclosure WP NEMA 3R metal enclosure BB BAPI-Box IP66 rated UV-resistant
Plastic enclosure BB2 BAP-Box 2 IP66 rated UV-resistant
Plastic enclosureMounting Directly to wallWiring Terminations 22 AWG wire, etched teflon leads Weight 0 .8 lb (0 .36 Kg)Approvals CE, RoHSWarranty Lifetime
in(mm)
2.75(69.9)
1/2" NPTTypical 2.16
(54.9)
0.25(6.4)
Medical-gradeClosed Cell
FoamInsulating Pad
5.0(127.0)
VentedSensorGuard
4.50(114.3)
(WP) OSA Probe
DESCRIPTIONThe BAPI BA Series OSA Thermistor and RTD Sensors are designed specifically for HVAC systems to be mounted outdoors . The UV-resistant plastic shield keeps the sensor out of the sunlight and allows for excellent air circulation . They come in thermistor and RTD sensors and feature etched teflon leadwires to perform under real world conditions .
FEATURES• Quick Response sensor• Well ventilated, light colored sensor guard• three watertight enclosure styles• Lifetime limited sensor warranty
DIMENSIONS
OSA TEMPERATURE SENSORSBA/ OSA SERIES
SPECIFICATIONSBA/1K375-O-BB2
NEW!
1223
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
OSA TEMPERATURE SENSORSBA/ OSA SERIES
ORDERING INFORMATION
Example: BA/10K3-O-BB BAPI 5" OSA 10,000Ω thermistor sensor with NEMA 4 weatherproof enclosure
BA/ 10K3 O BB
MODEL DESCRIPTION BA/ Probe temperature sensor REQUIRED SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type 2 10K3 10,000Ω thermistor @ 77°F (25°C), Type 3 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve 1K375 1000Ω RTD @32°F (0°C), 375 curve REQUIRED PROBE TYPE AND LENGTH O OSA probe 5" long REQUIRED MOUNTING ENCLOSURE JB 2" x 4" J-box with 1/2" knockouts BB NEMA 4 weatherproof, UV resistant plastic BB2 BAPI-Box 2 enclosure - IP66 rated, UV resistant polycarbonate WP NEMA 3R weatherproof enclosure
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!TEMPERATURE
1224
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
The Model KTUS uses a proven universal style enclosure for use in duct and immersion applications . The direct-mount design incorporates a 2 .5" x 2 .5" (6 .4 x 6 .4 cm) termination box with a 4 .87" (12 .4 cm) stainless steel probe . The probe may be inserted into a duct with 0 .4" (1 cm) hole or immersion using a WEL-B or a WEL-S .
The Model KTOS is used for outside air temperature sensing . The design allows for two-point mounting and 1 .5" (3 .8 cm) wall separation for more accurate performance . The weather shield protects the stainless steel probe from the effects of rain, sleet, and snow .
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure White plasticMounting Directly to well, duct,or wallWiring Terminations 8’, 24 AWG wire leads, type 81
sensors have 18” leadsProbe Seamless 304 stainless steel tube,
1⁄4” OD, 4 .87” longApprovals CEWeight 0 .2 lb (0 .1 kg) w/o optionsWarranty 3 years
DUCT, IMMERSION, OSA, THERMISTOR AND RTD SENSORSKTUS*, KTOS* SERIES
DESCRIPTIONThe Kele KTUS/KTOS Series of Duct, Immersion, OSA Thermistor and RTD Temperature Sensors are very economical and are accurate to within ±0 .5°F (±0 .28°C) . The Kele KTUS/KTOS Series sensors are ideally suited for HVAC applications . The mounting designs are based on proven techniques for installation efficiency with stainless steel probes for durability . These sensors come with a three-year warranty and are made of a very stable, pre-aged material which offers the reliability needed in HVAC systems .
FEATURES• Economical• Three-year warranty• Flame retardant, plenum rated• Adaptable with many mounting options• 304 stainless steel waterproof probes• Paintable plastic• NEMA 3R, IP22
PROBE TYPES
SPECIFICATIONS
KTUS*
KTOS*
NEW!
1225
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
4.87(12.38)
0.25(0.63)
3.25 (8.26)
2.5 (6.35)
1/8" NPT
2.3(5.84)
in (cm)
0.88 (2.24)
MountingTabs
KTUS*Multipurpose Duct and Immersion Sensor
DIMENSIONS
DUCT, IMMERSION, OSA, THERMISTOR AND RTD SENSORSKTUS*, KTOS* SERIES
ORDERING INFORMATION
KTUS 3 Example: KTUS-3-B 10,000Ω Type III universal mount thermistor sensor with brass wellB
MODEL DESCRIPTION KTUS Universal-mount sensor, duct, and immersion (order wells separately) KTOS Universal-mount sensor, OSA THERMISTOR SENSOR TYPE 3 10,000Ω thermistor @ 77°F (25°C), Type III 21 2252Ω thermistor @ 77°F (25°C), Type II 22 3000Ω thermistor @ 77°F (25°C), Type II 24 10,000Ω thermistor @ 77°F (25°C), Type II 27 100,000Ω thermistor @ 77°F (25°C), Type II 42 20,000Ω thermistor @ 77°F (25°C), Type IV 81 100Ω RTD@ 32°F (0°C), 385 platinum curve (yellow leads) 85 1000Ω RTD @ 32°F (0°C), 385 platinum curve (blue leads) 91 1000Ω RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS B Brass well included (WEL-B for US* only) QD¼ Nylon insulated quick disconnect ¼" S 304 stainless steel well included (WEL-S for US* only) X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCP25 25' non-shielded plenum cable XD Dual sensors in one probe XG Greenfield fitting (factory installed) XL Custom length insertion probes 1" to 60" XL2 in Custom length insertion probe, 2"(5.08 cm)(Specify E without well) XL9 Custom length insertion probe, 9"(22.86 cm)(Specify E without well) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors)
Correct position for mounting outdoor air sensor
1/2"Conduit Hole
Gasket
5.5(13.97)
4.75(12.07)
8.38(21.28)0.75 (1.91)
KTOS*OSA Sensor
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1226
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ShadedExposure
When choosing location for any outdoor air temperature sensors: 1. Do not mount above building openings (windows, doors)2. Keep sensor out of direct sunlight
Do not mount sensor in vertical position with theweather shield pointing up.
Duct: Drill a 9/16" (1.43 cm) hole for insertion into the duct. Attach probe snug to the duct with self tapping screws.Well Insertion: Install the well into the customer-supplied 1/2" saddle (Thredolet®), then thread the sensor into the well. For better heat transfer you may apply thermal compound to the tip of the sensor before insertion. Mounting tabs may be removed.OSA: Insert the shield into the bracket and thread the KT-U* through the gasket to the shield. Secure the assembly to the wall using the appropriate hardware for the wall surface. The ideal orientation of the sensor is horizontal with the knockout facing down and located on an outside wall with a shaded exposure. Mounting tabs may be removed. The sensor and shield may be painted to the architect’s specifications.
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years
RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Enclosure UL 94V-0, plenum-rated plastic
NEMA 3R, IP22, UV protected with snap-off cover
Mounting Directly to duct, immersion well, or OSA wall mount with appropriate bracket
Wiring Terminations 8', 24 AWG wire leads, type 81 sensors have 18" leads
Probe Seamless 304 stainless steel tube, 1⁄4" OD, 4 .87" long
Approvals CEWeight 0 .25 lb (0 .11 kg) w/o optionsWarranty 3 years
UNIVERSAL-MOUNT THERMISTOR AND RTD SENSORSKTU* SERIES
DESCRIPTIONThe Kele KTU* Series Universal-Mount Thermistor and RTD Sensors provide remote temperature sensing in multiple applications such as duct, OSA, and immersion installations for building automation systems . The active sensing element is a highly stable thermistor material or platinum RTD .
The sensing element is sealed with a thermally conductive compound in a 4-7/8" (12 .38 cm) long stainless steel probe and is attached to a 2 .5" (6 .35 cm) square enclosure . The tabs on the enclosure provide mounting ears for direct duct mounting and are easily removable if they are not needed . This multipurpose enclosure minimizes the number of stock parts required to handle multiple applications .
FEATURES• Three-year warranty• Flame retardant, plenum rated• Adaptable with many mounting options• 304 stainless steel waterproof probes• Paintable plastic• NEMA 3R, IP22
The Duct Temperature application is designed for direct mounting on sheet metal duct systems . The sensor is point sensitive and comes standard with a 4-7/8" (12 .38 cm) insertion depth . The XL option is available for custom lengths up to 36" (91 .44 cm) .
The Immersion Temperature application is designed to be threaded directly into a 1/8" NPT well . The wells are available in brass or 304 stainless steel and are designed for pipe insertion using a 1/2" threaded saddle (Thredolet®) .
The Outside Air Temperature application uses a wall bracket with a vented weather shield to minimize the effect of rain, snow, or other weather-related influences . This rugged enclosure and bracket will ensure long life even in severe weather conditions .
SPECIFICATIONS
PROBE APPLICATIONS
WEL-B KTU*
WEL-S OSAB
MOUNTING
NEW!
1227
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Correct position for mounting outdoor air sensor
1/2"Conduit Hole
Gasket
1/2" NPT
5.13(13.03)
3.25(8.26)
4.87(12.38)
0.25(0.63)
5.5(13.97)
4.75(12.07)
8.38(21.28)0.75 (1.91)
3.25 (8.26)
2.5 (6.35)
1/8 NPT
ST-U*Duct/Multipurpose Sensor
ST-U*B and ST-U*SWell Sensor
ST-U*OSensor for OSA
2.3(5.83) 0.88 (2.24)
2.5 (6.35)
0.75(1.91)
MountingTabs
Well
in(cm)
DIMENSIONS
UNIVERSAL-MOUNT THERMISTOR AND RTD SENSORSKTU* SERIES
ORDERING INFORMATION
KTU3 B Example: KTU3B 10,000Ω Type III immersion sensor with brass well
MODEL DESCRIPTION KTU3 10,000Ω universal-mount thermistor @ 77°F (25°C), Type III (gray leads) KTU21 2252Ω universal-mount thermistor @ 77°F (25°C), Type II (green leads) KTU22 3000Ω universal-mount thermistor @ 77°F (25°C), Type II (blue leads) KTU24 10,000Ω universal-mount thermistor @ 77°F (25°C), Type II (yellow leads) KTU27 100,000Ω universal-mount thermistor @ 77°F (25°C), Type II (gray leads) KTU42 20,000Ω universal-mount thermistor @ 77°F (25°C), Type IV (green leads)KTU81 100Ω universal-mount RTD @32°F (0°C), 385 platinum curve (yellow leads)KTU85 1000Ω universal-mount RTD @32°F (0°C), 385 platinum curve (blue leads)KTU91 1000Ω universal-mount RTD @32°F (0°C), 375 platinum curve (green leads) OPTIONS B WEL-B brass well included O OSAB outside weathershield, gasket, and bracket for wall mount included QD1/4 Nylon insulated quick disconnect 1/4" S WEL-S 304 stainless steel well included X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCP25 25' Non-shielded plenum cable XD Dual sensors in one probe XG Greenfield fitting (factory installed) XL Custom length insertion probes 1" to 108" XL2 in Custom length insertion probe, 2"(5.08 cm) XL9 Custom length insertion probe, 9"(22.86 cm) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XZ Three wire RTD connections (Type 81 only) (Not with XC25, XCP25)
Correct position for mounting outdoor air sensor
1/2"Conduit Hole
Gasket
1/2" NPT
5.13(13.03)
3.25(8.26)
4.87(12.38)
0.25(0.63)
5.5(13.97)
4.75(12.07)
8.38(21.28)0.75 (1.91)
3.25 (8.26)
2.5 (6.35)
1/8 NPT
ST-U*Duct/Multipurpose Sensor
ST-U*B and ST-U*SWell Sensor
ST-U*OSensor for OSA
2.3(5.83) 0.88 (2.24)
2.5 (6.35)
0.75(1.91)
MountingTabs
Well
in(cm)
RELATED PRODUCTS PAGEF-1000-331 Nylon bushing for open wiring OSAB OSA weather shield, gasket, and bracket T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298
NEW!TEMPERATURE
1228
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Enclosure UL 94V-0, plenum-rated plastic
NEMA 3R, IP22 UV protected with snap-off cover
Mounting Directly to duct, immersion well, or OSA wall mount with appropriate bracket
Wiring Terminations 8' (2 .4m) of 24 AWG pigtails with prestripped ends, type 71 & 81 have 18" leads
Approvals CEWeight 0 .25 lb (0 .1 kg) w/o optionsWarranty Lifetime
UNIVERSAL-MOUNT THERMISTOR AND RTD SENSORSST-U* SERIES
DESCRIPTIONThe PreCon Model ST-U* Universal-Mount Thermistor and RTD Sensor provides precision remote temperature sensing in multiple applications such as Duct, OSA, and Immersion installations for building automation systems . The active sensing element is a highly stable precision thermistor material or platinum RTD .
The sensing element is sealed with a thermally conductive compound in a 4-7/8" (12 .38 cm) long stainless steel probe and is attached to a 2 .5" (6 .35 cm) square enclosure . The tabs on the enclosure provide mounting ears for direct duct mounting and are easily removable if they are not needed . This multipurpose enclosure minimizes the number of stock parts required to handle multiple applications .
FEATURES• Lifetime warranty• Flame retardant, plenum rated• Wide selection of thermistor and RTD curves• Adaptable with many mounting options• 304 stainless steel probes• Easy to mount to duct, well, or wall• Waterproof probe• Paintable plastic• NEMA 3R, IP22• Brass or stainless well• Outside air kit• Custom lengths• Matched sensor pairs• Ultra high accuracy optional
TM
The Duct Temperature application is designed for direct mounting on sheet metal duct systems . The sensor is point sensitive and comes standard with a 4-7/8" (12 .38 cm) insertion depth . The XL option is available for custom lengths up to 36" (91 .44 cm) .
The Immersion Temperature application is designed to be threaded directly into a 1/8" NPT well . The wells are available in brass or 304 stainless steel and are designed for pipe insertion using a 1/2" threaded saddle (Thredolet®) .
The Outside Air Temperature application uses a wall bracket with a vented weather shield to minimize the effect of rain, snow, or other weather related influences . This rugged enclosure and bracket will ensure long life even in severe weather conditions .
SPECIFICATIONS
PROBE APPLICATIONS
WEL-B ST-U*
WEL-S OSAB
NEW!
1229
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ShadedExposure
When choosing location for any outdoor air temperature sensors: 1. Do not mount above building openings (windows, doors)2. Keep sensor out of direct sunlight
Do not mount sensor in vertical position with theweather shield pointing up.
Duct: Drill a 9/16" (1.43 cm) hole for insertion into the duct. Attach probe snug to the duct with self tapping screws.Well Insertion: Install the well into the customer-supplied 1/2" saddle (Thredolet®), then thread the sensor into the well. For better heat transfer you may apply thermal compound to the tip of the sensor before insertion. Mounting tabs may be removed.OSA: Insert the shield into the bracket and thread the KT-U* through the gasket to the shield. Secure the assembly to the wall using the appropriate hardware for the wall surface. The ideal orientation of the sensor is horizontal with the knockout facing down and located on an outside wall with a shaded exposure. Mounting tabs may be removed. The sensor and shield may be painted to the architect’s specifications.
Correct position for mounting outdoor air sensor
1/2"Conduit Hole
Gasket
1/2" NPT
5.13(13.03)
3.25(8.26)
4.87(12.38)
0.25(0.63)
5.5(13.97)
4.75(12.07)
8.38(21.28)0.75 (1.91)
3.25 (8.26)
2.5 (6.35)
1/8 NPT
ST-U*Duct/Multipurpose Sensor
ST-U*B and ST-U*SWell Sensor
ST-U*OSensor for OSA
2.3(5.83) 0.88 (2.24)
2.5 (6.35)
0.75(1.91)
MountingTabs
Well
in(cm)
MOUNTINGDIMENSIONS
UNIVERSAL-MOUNT THERMISTOR AND RTD SENSORSST-U* SERIES
ORDERING INFORMATION
ST-U3 B Example: ST-U3B 10,000Ω Type III immersion sensor with brass well
MODEL DESCRIPTION ST-U3 10,000Ω universal-mount thermistor @ 77°F (25°C), Type III (gray leads) ST-U21 2252Ω universal-mount thermistor @ 77°F (25°C), Type II (green leads) ST-U22 3000Ω universal-mount thermistor @ 77°F (25°C), Type II (blue leads) ST-U24 10,000Ω universal-mount thermistor @ 77°F (25°C), Type II (yellow leads) ST-U27 100,000Ω universal-mount thermistor @ 77°F (25°C), Type II (gray leads) ST-U42 20,000Ω universal-mount thermistor @ 77°F (25°C), Type IV (green leads)ST-U63 1000Ω nickel universal-mount RTD @70°F (21°C), (yellow leads)ST-U71 100Ω ultra high accurate universal-mount RTD @32°F (0°C), 385 platinum curve (blue leads)ST-U81 100Ω universal-mount RTD @32°F (0°C), 385 platinum curve (yellow leads)ST-U85 1000Ω universal-mount RTD @32°F (0°C), 385 platinum curve (blue leads)ST-U91 1000Ω universal-mount RTD @32°F (0°C), 375 platinum curve (green leads) OPTIONS B WEL-B brass well included O OSAB Outside weathershield, gasket, and bracket for wall mount included QD¼ Nylon insulated quick disconnect 1/4" S WEL-S 304 stainless steel well included X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length jacketed cable XCP25 25' Non-shielded plenum cable XD Dual sensors in one probe XG Greenfield fitting (factory installed) XL Custom length insertion probes 1" to 108" XL2 in Custom length insertion probe, 2"(5.08 cm) XL9 Custom length insertion probe, 9"(22.86 cm) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XZ Three wire RTD connections(optional only on Type 81, standard on Type 71, not available with XC25 & XCP25 options)
RELATED PRODUCTS PAGEF-1000-331 Nylon bushing for open wiring OSAB OSA weather shield, gasket, and bracket TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298WEL-B Brass well 1294WEL-S 304 stainless steel well 1294
NEW!TEMPERATURE
1230
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 Curve
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Enclosure Metal handy boxMounting Directly to duct with back boxWiring Terminations 8' (2 .4m) of 24 AWG prestripped
pigtails, Type 81 sensor has 18" leads
Approvals CEWeight 12" 0 .5 lb (0 .23 kg) 18" 0 .6 lb (0 .3 kg) 24" 0 .7 lb (0 .32 kg) 36" 0 .8 lb (0 .37 kg)Warranty Lifetime
RIGID AVERAGING THERMISTOR AND RTD SENSORST-FZR SERIES
DESCRIPTIONThe Precon ST-FZR* Series Rigid Averaging Thermistor and RTD Sensor provides precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing elements are constructed of highly stable precision thermistor materials or platinum RTDs .
The sensing elements are sealed in a 304 stainless steel probe attached to a standard handy box with mounting bracket attached .
FEATURES
• Lifetime warranty• ±0.36°F (±0.2°C) accuracy• Wide selection of thermistor curves• Four lengths to fit to most duct sizes• Easy to mount to duct wall• Four sensing elements in a series-parallel arrangement• Rigid sensor
TM
APPLICATION
The ST-FZR* Series is designed for direct mounting to sheet metal for average duct temperature sensing . The sensors contain four sensing elements . The thermistors are configured in a series/parallel method, which creates an end result of total average resistance, equal to the same span as a standard thermistor, with a temperature range of 32° to 160°F (0° to 71°C) .
OPTIONS• Weather resistant handy box• 25' lead length
SPECIFICATIONS
ST-FZR Rigid Averaging Sensor
NEW!
1231
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supports typically not required
356-090Swivel Flange Bracket
for angle mountingas needed
Vinyl Grommet
Mounting T-Bar
4.0(10.2)
in(cm)
0.25(0.64)
1.70(4.3)
3.88(9.89)
L
MOUNTING DIMENSIONS
RIGID AVERAGING THERMISTOR AND RTD SENSORST-FZR SERIES
ORDERING INFORMATION
Example: ST-FZR3-12 10,000Ω Type III averaging thermistor sensor with 12" (7.62m) probe and four sensing elementsST-FZR3 12
MODEL DESCRIPTIONST-FZR3 10,000Ω averaging thermistor @ 77°F (25°C), Type III (gray leads)ST-FZR21 2252Ω averaging thermistor @ 77°F (25°C), Type II (green leads)ST-FZR22 3000Ω averaging thermistor @ 77°F (25°C), Type II (blue leads)ST-FZR24 10,000Ω averaging thermistor @ 77°F (25°C) Type II (yellow leads)ST-FZR27 100,000Ω averaging thermistor @ 77°F (25°C), Type II (gray leads)ST-FZR42 20,000Ω averaging thermistor @ 77°F (25°C), Type IV (green leads)ST-FZR81 100Ω Room RTD @ 32°F (0°C), 385 platinum curve (yellow leads)ST-FZR85 1000Ω Room RTD @ 32°F (0°C), 385 platinum curve (blue leads)ST-FZR91 1000Ω Room RTD @ 32°F (0°C), 375 platinum curve (green leads) INSERTION LENGTH 12 12'' length (30.48 cm) 18 18'' length (45.72 cm) 24 24'' length (60.96 cm) 36 36'' length (91.44 cm) QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length 24 AWG jacketed cable XCO ½" LB condulet fitting XCP25 25' (7.6m) non-shielded 22AWG plenum cable XLT Liquid-tight fitting (factory installed) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XNB ½'' MNPT brass close nipple XNP ½'' MNPT plastic close nipple XW Weather resistant housing
RELATED PRODUCTS PAGE356-090 Swivel flange bracket T81PNR Series Temperature transmitter for type 81, 385 platinum curve sensors, cover mounted 1288 T81U Series Temperature transmitter for type 81, 385 platinum curve sensor, track mounted 1281T85PNR Series Temperature transmitter for type 85, 385 platinum curve sensors, cover mounted 1288T85U Series Temperature transmitter for type 85, 385 platinum curve sensor, track mounted 1279T90PNR Series Temperature transmitter for type 91, 375 platinum curve sensors, cover mounted 1288T91U Series Temperature transmitter for type 91, 375 platinum curve sensor, track mounted 1277UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1232
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ST-AV91R-18
Accuracy ±0 .27°F (±0 .15°C)Sensor Type Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range -50° to 275°F (-45° to 135°C)Sensor Length 12" (30 .5 cm), 18" (45 .7 cm), 24" (61
cm), 36" (91 .4 cm)Sensitivity Type 81 0 .21Ω/°F @ 32°F (0°C) Type 85, 91 2 .1Ω/°F @ 32°F (0°C)
Materials Of Construction Element Casing 0 .188" (4 .8 mm) BrassEnclosure Metal, weather-resistantDimensions Element diameter 0 .188" (4 .8 mm)Wiring Terminations 22 AWG Teflon insulated, white/redWeight 12" 1 .2 lb (0 .54 Kg) 18" 1 .4 lb (0 .63 Kg) 24" 1 .8 lb (0 .82 Kg) 36" 2 .1 lb (0 .95 Kg)Warranty 3 years
PLATINUM CURVE RIGID AVERAGING SENSORSST-AV81R, ST-AV85R, ST-AV91R
DESCRIPTIONThe Minco Continuous-resistance element ST-AV*R Platinum Curve Rigid Averaging Sensors provide accurate sensing of duct temperatures when a small, inaccessible area must be covered . They average temperatures over their entire length and terminate in a weather-resistant housing . They are available in 12", 18", 24", and 36" (30 .5, 45 .7, 61, and 91 .4 cm) lengths . The sensor uses an element that closely matches platinum resistance/temperature characteristics over the specified range . It is available in 100Ω and 1000Ω 385 curve and 1000Ω 375 curve . The sensors have a brass case that is rigid for easy single-point mounting .
FEATURES• Continuous averaging• Rigid sensor• 12", 18", 24", 36" (30.5, 45.7, 61, and 91.4 cm) lengths• 100Ω and 1000Ω 385 curve• Weather-resistant box
APPLICATION
• Small ducts without access• Mixed air chambers• Hot/Cold deck discharge• Face/Bypass discharge• Unit vents
SPECIFICATIONS
4.5(11.43) 1/2"
NPT
2.0(5.08)
4.5(11.43)
in
(cm)
1.38(3.49)
0.188(4.8 mm)
12 (30.5)18 (45.7)24 (61.0)36 (91.4)
0.25(0.64)
2.75(6.99)
2.0(5.08)
Brass AveragingProbe
0.25(0.635)
DIMENSIONS
NEW!
1233
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supports typicallynot required
Transmitter can be mountedin the electrical box.
356-090Swivel Flange Bracket
for angle mountingas needed(white)
(red)
WIRING DIMENSIONS
PLATINUM CURVE RIGID AVERAGING SENSORSST-AV81R, ST-AV85R, ST-AV91R
ORDERING INFORMATION
MODEL DESCRIPTIONST-AV81R 100Ω 385 rigid averaging duct probeST-AV85R 1000Ω 385 rigid averaging duct probeST-AV91R 1000Ω 375 rigid averaging duct probe INSERTION LENGTH 12 12" length 18 18" length 24 24" length 36 36" length WIRING OPTIONS XZ 3 wire (ST-AV81R only)
RELATED PRODUCTS PAGE356-090 Swivel flange bracket T81PNR Series Temperature transmitter for type 81, 385 platinum curve sensors, cover mounted 1288T81U Series Temperature transmitter for type 81, 385 platinum curve sensor, track mounted 1281T85PNR Series Temperature transmitter for type 85, 385 platinum curve sensors, cover mounted 1288T85U Series Temperature transmitter for type 85, 385 platinum curve sensor, track mounted 1279T90PNR Series Temperature transmitter for type 91, 375 platinum curve sensors, cover mounted 1288T91U Series Temperature transmitter for type 91, 375 platinum curve sensor, track mounted 1277
NEW!TEMPERATURE
1234
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy ±0 .36°F (0 .2°C)Sensor Type 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Stability 0 .24°F (0 .13°C) over five yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Temperature Coefficient
Negative temperature coefficient
Mounting Directly to duct with back box, clips available for serpentine mounting
Wiring Terminations 8' (2 .4m) of 24 AWG prestripped pigtails
Approvals CEWeight 8' 1 .25 lb (0 .6 kg) 12' 1 .5 lb (0 .7 kg) 25' 2 .3 lb (1 .04 kg)Warranty Lifetime
AVERAGING THERMISTOR SENSORSST-FZ* SERIES
DESCRIPTIONThe Precon ST-FZ Series Averaging Thermistor Sensor provides precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing elements are highly stable precision thermistor material accurate to within ±0 .36°F (0 .2°C) .
The sensing elements are sealed in a 3/16" (0 .48 cm) soft-drawn copper coiled tube, attached to a standard handibox with mounting bracket attached .
FEATURES• Lifetime warranty• ±0.36°F (0.2°C) accuracy• Wide selection of thermistor curves• Adaptable to most duct sizes• Easy to mount to duct wall • 3/16" (0.48 cm) soft copper sensor • Copper facilitates quick average temperature response
TM
APPLICATIONThe Model ST-FZ* is designed for direct mounting to sheet metal for average duct temperature sensing . The sensor is multi-point sensitive through the length of the temperature conductive tubing .The 8' (2 .4 m) and 12 .5' (3 .8 m) models contain four sensing elements and the 25' (7 .6 m) model has nine sensing elements . The thermistors are configured in a series/parallel method which creates an end result of total average resistance, equal to the same span as a standard thermistor, with a temperature range of 32° to 160°F (0° to 71°C) .
OPTIONS• 8' (2.4m) long element for very small ducts• 12.5' (3.8m) long element for small ducts• 25' (7.6m) long element for larger ducts• Weather resistant handy box
SPECIFICATIONS
ST-FZ*
NEW!
1235
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
CC-1G-KCapillarySupports
Drill a 5/8" (1.6 cm) hole for probe insertion and serpentine the sensor across the duct, turning at each end using theModel M-648 end clip and Model M-633 mid-duct support.Avoid kinking the tube as this could cause a short circuit.Using the provided #6 screws, secure the box to the duct either with the mounting ears or through the box holes.
5/8" (1.6 cm) hole
2.25(5.72)
8, 12.5, or 25'(2.44, 3.81, or 7.62m)
4.25(10.80)
3/16" (0.47) Tubing
in(cm)
Front View Side View
MOUNTING DIMENSIONS
AVERAGING THERMISTOR SENSORSST-FZ* SERIES
ORDERING INFORMATION
Example: ST-FZ3-25 10,000Ω Type III averaging thermistor sensor with 25' (7.62m) probe and nine sensing elements
ST-FZ3 25
MODEL DESCRIPTIONST-FZ3 10,000Ω averaging thermistor @ 77°F (25°C), Type III (gray leads)ST-FZ21 2252Ω averaging thermistor @ 77°F (25°C), Type II (green leads)ST-FZ22 3000Ω averaging thermistor @ 77°F (25°C), Type II (blue leads)ST-FZ24 10,000Ω averaging thermistor @ 77°F (25°C) Type II (yellow leads)ST-FZ27 100,000Ω averaging thermistor @ 77°F (25°C), Type II (gray leads)ST-FZ42 20,000Ω averaging thermistor @ 77°F (25°C), Type IV (green leads) SENSING ELEMENT 8 8' (2.44m) probe length, four elements total 12 12.5' (3.81m) probe length, four elements total 25 25' (7.62m) probe length, nine elements total QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length 24 AWG jacketed cable XCO ½" LB condulet fitting XCP25 25' (7.6m) non-shielded 22AWG plenum cable XLT Liquid-tight fitting (factory installed) XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) XNB ½'' MNPT brass close nipple XNP ½'' MNPT plastic close nipple XW Weather resistant housing
RELATED PRODUCTS PAGECC-1G-K Plastic capillary and sensor holder mounting clip 1391M-633 Copper-plated capillary mounting mid-duct support 908M-648-K Copper-clad capillary mounting clip 1391UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1236
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
ST-AV81HST-AV81H12ST-AV81H50ST-AV85HST-AV85H12ST-AV85H50
MODEL DESCRIPTION
ST-AV81H Example: ST-AV81H 100Ω 385 platinum averaging duct sensor with 24' (7.3m) element
XZ Three-wire option (100Ω sensor only; Type 81)
100Ω averaging duct sensor 24' (7.3m), 385 platinum curve100Ω averaging duct sensor 12' (3.7m), 385 platinum curve100Ω averaging duct sensor 50' (15.2m), 385 platinum curve1000Ω averaging sensor 24' (7.3m), 385 platinum curve1000Ω averaging sensor 12' (3.7m), 385 platinum curve1000Ω averaging sensor 50' (15.2m), 385 platinum curve
Accuracy ±0 .27°F (±0 .15°C)Sensor Type Type 81 100Ω ±0 .25% @ 32°F (0°C) Type 85 1000Ω ±0 .25% @ 32°F (0°C)Temperature Range -40° to 240°F (-40° to 115°C)Sensitivity Type 81 0 .217Ω/°F @ 32°F (0°C) Type 85 2 .17Ω/°F @ 32°F (0°C)Sensor Length/Weight 12 ft (3 .7m); 1 .3 lb (0 .59 Kg) 24 ft (7 .3m); 1 .95 lb (0 .88 Kg) 50 ft (15 .24m); 3 .6 lb (1 .6 Kg)Element Casing Copper 0 .19" dia (0 .48 cm)Enclosure Weather resistantWiring Terminations 22 AWG, Teflon insulatedWarranty 3 years
DESCRIPTION
The Minco continuous-resistance element 100 Ω and 1000Ω Platinum Curve Averaging RTD Sensors provide accurate sensing of duct temperatures when a large area must be covered . They average temperatures over their entire length and terminate in a weather resistant housing .The averaging sensors use elements that closely match platinum resistance/temperature characteristics over the specified range .The sensors have copper cases that are bendable to a radius of 4" (10 .2 cm), and they can crisscross a duct or plenum to average out temperature stratification .
FEATURES• Continuous averaging• Flexible copper probe• 12' (3.7m), 24' (7.3 m) or 50' (15.2 m) lengths• Weather resistant box• 100 or 1,000 ohm 385 sensor
TYPICAL APPLICATION
100 & 1000 OHM PLATINUM CURVE AVERAGING SENSORSST-AV81H, ST-AV85H
SPECIFICATIONS
CC-1G-K
ST-AV85H
CC-1G-KCapillaryMounting Clip
Transmitter can be mounted in the electrical box.
RELATED PRODUCTS PAGECC-1G-K Plastic capillary and sensor holder mounting clip 1391M-648-K Copper-clad capillary mounting clip 1391T81PNR Series Temperature transmitter for type 81, 385 platinum curve sensors, cover mounted 1288T81U Series Temperature transmitter for type 81, 385 platinum curve sensor, track mounted 1281T85PNR Series Temperature transmitter for type 85, 385 platinum curve sensors, cover mounted 1288T85U Series Temperature transmitter for type 85, 385 platinum curve sensor, track mounted 1279
NEW!
1237
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
CC-1G-KCapillaryMounting Clip
Transmitter can be mounted in the electrical box.
ORDERING INFORMATION
Accuracy ±0 .54°F (±0 .30°C)Sensor Type 1000Ω ±0 .25% @ 32°F (0°C)Temperature Range -40° to 240°F (-40° to 115°C)Temperature Coefficient
0 .00375Ω/Ω/°C platinum curveSensitivity 2 .1Ω/°F @ 32°F (0°C)Operating Temperature -40° to 240°F (-40° to 115°C)Element Casing Copper 0 .19" dia . (0 .48 cm)Sensor Length/Weight 24 ft (7 .3m); 1 .95 lb (0 .88 Kg) 12 ft (3 .7m); 1 .31 lb (0 .59 Kg) 50 ft (15 .2m); 3 .6 lb (1 .63 Kg)Enclosure Metal, weather resistantWarranty 3 years
1000 OHM 375 PLATINUM AVERAGING SENSORSST-AV91H
DESCRIPTIONThe Minco continuous resistance element ST-AV91H 1000Ω 375 Platinum Averaging RTD Sensors provide accurate sensing of duct temperatures when a large area must be covered . Temperatures are averaged over the entire length and terminate in a weather resistant housing . The ST-AV91H uses an element that closely matches platinum resistance/temperature characteristics over the specified range . The sensors have a copper case that is bendable to a radius of 4" (10 .2 cm) . They can crisscross a duct or plenum to average out temperature stratification .
FEATURES• Continuous averaging• Flexible copper probe• 12' (3.7m), 24' (7.3 m) or 50' (15.2 m) lengths• Weather resistant box• 1,000 ohm 375 sensor
DIMENSIONSSPECIFICATIONS
MODEL DESCRIPTIONST-AV91H-12 Platinum averaging duct sensor 12' (3.7m)ST-AV91H50 Platinum averaging duct sensor 50' (15.2m)ST-AV91H Platinum averaging duct sensor 24' (7.3m)
CC-1G-K
ST-AV91H
RELATED PRODUCTS PAGECC-1G-K Plastic capillary and sensor holder mounting clip 1391M-648-K Copper-clad capillary mounting clip 1391T90PNR Series Temperature transmitter for type 91, 375 platinum curve sensors, cover mounted 1288T91U Series Temperature transmitter for type 91, 375 platinum curve sensor, track mounted 1277
NEW!TEMPERATURE
1238
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .5°F (0 .4°C)Sensor Type Thermistor 10 kΩ, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curveTemperature Range -40° to 275°F (-40° to 135°C)Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C
(power needed to raise the temperature by 1°C)
Enclosure Galvanized metal box, plastic and NEMA4X available
Wiring Terminations 10" of 22 AWG wire or terminal stripApprovals CEWeight 1 .2 lb (0 .54 kg)Warranty 5 years
in(cm)
A/*-A-X-60Averaging
0.90(2.3)
4.0(10.2)
0.125 (0.3)Foam
Insulation
D 8" (20.3 cm)A12 12' (3.6 m)A24 24' (7.3 m)
0.76 (1.9)
1.70(4.3)
DESCRIPTIONThe ACI Series Averaging Thermistor and RTD Sensors are designed specifically for HVAC system temperature control . The averaging sensors come in thermistor and RTD sensor curves compatible with most BAS systems available today . Averaging sensors come with a foambacked handy box and in 12' (3 .7m) or 24' (7 .3) lengths .
The ACI Averaging Sensor should be mounted across a duct in a serpentine fashion with bends in a smooth ark using an M-648-K or CC-1G-K clip . The RTD probe is sensitive for the entire length, while the thermistor is sensitive at nine evenly spaced sensor locations . Use standard metal screws to secure to the duct .
DIMENSIONS
AVERAGING TEMPERATURE SENSORSACI AVERAGING SERIES
SPECIFICATIONS
ORDERING INFORMATION
A/AN-A-12-GD
FEATURES
• Lengths of 12' (3.7 m) or 24' (7.3 m)• Two-year warranty• Bendable copper
MODEL DESCRIPTIONA/AN-A-12-GD Averaging sensor with 12' (3.6 m) length, 10 kΩ thermistor, Type 3 (ACI/AN-A12)A/CP-A-12-GD Averaging sensor with 12' (3.6 m) length, 10 kΩ thermistor, Type 2 (ACI/CP-A12)A/20K-A-12-GD Averaging sensor with 12' (3.6 m) length, 10 kΩ thermistor, Type 42 (ACI/20K-A12)A/100-2W-A-12-GD Averaging sensor with 12' (3.6 m) length, 1 kΩ RTD 385 curve, two-wire (ACI/100-2-A12)A/1K-2W-A-12-GD Averaging sensor with 12" (3.6 m) length, 1 kΩ RTD 385 curve, two-wire (ACI/1000-2-A12)
RELATED PRODUCTS PAGECC-1G-K Plastic capillary and sensor holder mounting clip 1391T85PNR Series Temperature transmitter for type 85, 385 platinum curve sensors, cover mounted 1288T85U Series Temperature transmitter for type 85, 385 platinum curve sensor, track mounted 1279UR Moisture-resistant three-wire butt splice 229
NEW!
1239
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .55°F (±0 .30°C)Sensor Type Thermistor 10 kΩ Type II & III RTD 100Ω,1000Ω, 385 curve; 1000Ω,
375 curveTemperature Range
32° to 158°F (-0° to 70°C°)Stability < 0 .036°F (0 .02°C) per year, 0 .14°C with
6,000 continuous hours at 400°CHeat Dissipation 2 .7 mW/°C (power need to raise the
temperature 1°C), 0 .4°C/mW at 0°C
Enclosure NB No box with 18" leads JB 2" x 4" J-box with 1/2" knockouts BB BAPI Box IP66 rated, NEMA 4 UV-resistant
polycarbonate BB2 BAPI Box 2 IP66 rated, NEMA 4 UV-resistant
polycarbonate BB4 BAPI Box 4 IP44 Nylon & Plastic WP NEMA 3R cast aluminumMounting Directly to Duct, with clips to mount coilWiring Terminations
22 AWG wire, etched teflon leads Approvals CE, RoHSWeight 1 to 2 lbs (Varies with probe length)Warranty Lifetime
AVERAGING THERMISTOR AND RTD SENSORSBA/ AVERAGING SERIES
DESCRIPTIONThe BAPI BA Series Averaging Thermistor and RTD Sensors are availible in a variety of easy to mount installation types . They come in thermistor and RTD sensors and feature etched Teflon leadwires . Flexible probes are made of bendable aluminum while the rigid probes are made of stainless steel .
FEATURES• Flexible averaging lengths: 8' (2.4m), 12’ (3.7m) and 24’
(7.3m)• Several enclosure styles with mounting tabs for easy
installation• Limited lifetime warranty
SPECIFICATIONS
DIMENSIONS
BA/10K2-A8-BB4
BA/10K2-A8-JB
BA/10K2-A8-NB
BA/10K2-A8-BB
BA/10K2-A8-BB2
BA10K2-A8-BB4
NEW!TEMPERATURE
1240
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
DIMENSIONS
ORDERING INFORMATION
Example: BA/10K3-A8-JB BAPI 8" averaging 10,000Ω thermistor sensor with JB box
BA/ 10K3 A8 JB
MODEL DESCRIPTION BA/ Probe temperature sensor REQUIRED SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type 2 10K3 10,000Ω thermistor @ 77°F (25°C), Type 3 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve 1K375 1000Ω RTD @32°F (0°C), 375 curve REQUIRED PROBE TYPE AND LENGTH A8 Flexible averaging probe 8' long A12 Flexible averaging probe 12' long A24 Flexible averaging probe 24' long RA12 Rigid averaging probe 12" long RA2 Rigid averaging probe 24" long RA4 Rigid averaging probe 48" long REQUIRED MOUNTING ENCLOSURE (JB is standard) NB No box with 18" leads JB 2" x 4" J-box with 1/2" knockouts BB NEMA 4 weatherproof, UV resistant plastic BB2 IP66 UV resistant polycarbonate enclosure BB4 IP66 UV resistant polycarbonate enclosure WP NEMA 3R weatherproof enclosure
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277CC-1G-K Plastic capillary and sensor holder mounting clip 1391M-648-K Copper-clad capillary mounting clip 1391
AVERAGING THERMISTOR AND RTD SENSORSBA/ AVERAGING SERIES
BA/10K2-A8-JB
BA/10K2-A8-NB
BA/10K2-A8-WP
NEW!
1241
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Platinum ±0 .1% Nickel/Balco ±0 .5°F (0 .3°C)Sensor Type Thermistor 2252Ω, 3000Ω, 10,000Ω Type II & III,
20,000Ω, 100,000Ω 100Ω Platinum 385 curve, 1,000Ω
Platinum 385 curve RTD 100 Platinum 385 curve, 1,000 Platinum
385 curve, 1,000 Nickel, 1,000 BalcoElement Casing Plenum rated cable or Metallic Armored
cableSensor Length/Weight Plenum 6 ft (1 .8 m); 1 .0 lb (0 .45 Kg) 12 ft (3 .6 m); 1 .05 lb (0 .48 Kg) 24 ft (7 .2 m); 1 .15 lb (0 .51 Kg) Armored 6 ft (1 .8 m); 1 .23 lb (0 .56 Kg) 12 ft (3 .6 m); 1 .45 lb (0 .66 Kg) 24 ft (7 .2 m); 1 .91 lb (0 .86 Kg)Operating Temperature -40° to 200°F (-40° to 93°C)Enclosure Metal, NEMA 4XWiring Terminations 5" (15 .2 cm) of 22 AWG pigtailsApprovals CE, RoHsWarranty 5 years
CC-1G-KCapillaryMounting Clip
Sensor can be mountedin the electrical box.
DESCRIPTIONThe Mamac Systems Model TE707C Flexible Plenum and Armored Averaging Temperature Sensors provides accurate temperature sensing for ducts when large areas must be covered in building automation systems and mechanical equipment room instrumentation .The flexible sensors are easy to install and are moisture sealed . The sensors can come in lengths of 6', 12' or 24' .
FEATURES• Plenum rated or Metallic Armored cable• Weather proof box• Variety of thermistors and RTDs• 6' (1.8m), 12' (3.6m) and 24' (7.2m) lengths
DIMENSIONS
FLEXIBLE PLENUM AND ARMORED AVERAGING THERMISTOR AND RTD SENSORSTE707C SERIES
SPECIFICATIONS
TE-707C
ORDERING INFORMATION
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281CC-1G-K Plastic capillary and sensor holder mounting clip 1391M-648-K Copper-clad capillary mounting clip 1391
TE707C 12 Example: TE707C-12-A-1 10,000Ω Thermistor @ 77°F (25°C); Type III (green leads), 6 foot (1.8 m), plenum rated cable.
MODEL DESCRIPTIONTE707C Flexible averaging sensor with NEMA 4X enclosure OPTIONS 1 100Ω RTD @ 32°F (0°C); 385 Platinum curve (yellow leads) 3 1,000Ω RTD @ 32°F (0°C); 385 Platinum curve (red leads) 4 1,000Ω RTD @ 32°F (0°C); Nickel (voilet leads) 5 1,000Ω RTD @ 32°F (0°C); Balco (brown leads) 7 10,000Ω Thermistor @ 77°F (25°C); Type III (green leads) 10 3,000Ω Thermistor @ 77°F (25°C); (black leads) 12 10,000Ω Thermistor @ 77°F (25°C); Type II (green & red leads) 15 100,000Ω Thermistor @ 77°F (25°C); (orange & black leads) 17 20,000Ω Thermistor @ 77°F (25°C); (green & blue leads) 18 2,252Ω Thermistor @ 77°F (25°C); (red & yellow leads) A 6 foot (1.8 m) B 12 foot (3.6 m) C 24 foot (7.2 m) 1 Plenum rated cable 2 Armorer cable
A 1
NEW!TEMPERATURE
1242
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Platinum ±0 .54°F (0 .3°C) Nickel ±0 .72°F (0 .4°C)Sensor Type Thermistor 2252Ω, 3000Ω, 10,000Ω Type II &
III, 20,000Ω 100Ω Platinum 385 curve, 1,000Ω
Platinum 385 curve, 1,000Ω Nickel, 1,000Ω Balco
Sensor Length/ Weight 6 ft (1 .8 m); 0 .5 lb (0 .22 Kg) 12 ft (3 .6 m); 0 .61 lb (0 .27 Kg) 20 ft (6 .1 m); 0 .71 lb (0 .32 Kg) 24 ft (7 .2 m); 0 .81 lb (0 .36 Kg)Operating Temperature -4° to 140°F (-20° to 60°C)Enclosure Metal, NEMA 4XApprovals CE, RoHsWarranty 1 year
FLEXIBLE AVERAGING THERMISTOR AND RTD SENSORSTE200FDC SERIES
CC-1G-KCapillaryMounting Clip
Sensor can be mountedin the electrical box.
DESCRIPTIONThe Greystone Energy Systems TE200FDC Series Flexible Averaging Thermistor and RTD Sensor provides accurate temperature sensing for ducts when large areas must be covered in building automation systems and mechanical equipment room instrumentation .The flexible sensors are easy to install and are moisture sealed . The sensors can come in lengths of 6', 12', 20' or 24' .
FEATURES• Plenum rated cable• Weather proof box• Variety of thermistors and RTDs• 6' (1.8m), 12' (3.6m), 20' (6.1m) and 24' (7.2m) lengths
DIMENSIONSSPECIFICATIONS
TE200FDC
ORDERING INFORMATION
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281CC-1G-K Plastic capillary and sensor holder mounting clip 1391M-648-K Copper-clad capillary mounting clip 1391
MODEL DESCRIPTIONTE200FDC Flexible averaging sensor with NEMA 3R enclosure OPTIONS 2 100Ω RTD @ 32°F (0°C); 385 Platinum curve (red, red, white leads) 12 1,000Ω RTD @ 32°F (0°C); 385 Platinum curve (gray leads) 13 1,000Ω RTD @ 32°F (0°C); Nickel (gray leads) 5 1,000Ω RTD @ 32°F (0°C); Balco (???? leads) 7 10,000Ω Thermistor @ 77°F (25°C); Type III (light gray leads) 6 3,000Ω Thermistor @ 77°F (25°C); (light blue leads) 24 10,000Ω Thermistor @ 77°F (25°C); Type II (yellow leads) 20 20,000Ω Thermistor @ 77°F (25°C); (green leads) 8 2,252Ω Thermistor @ 77°F (25°C); (gray leads) A 6 foot (1.8 m) B 12 foot (3.6 m) C 20 foot (6.1 m) D 24 foot (7.2 m)
TE200FDC 12 Example: TE200FDC-12-A 1,000Ω RTD @ 32°F (0°C); 385 platinum curve (gray leads), 6 foot (1.8 m).
A
NEW!
1243
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Ø 0.375
2.5 REF Varies by model
¾ - 14 NPSM (Z)
Supply Voltage 24V VAC/VDCAccuracy ±0 .9°F (±0 .5°C)Sensor Casing PVC coated flexible galvanized steelSensor Type 1000Ω RTD Pt 385 curveSensor Length 10' (3 .1 m), 24' (7 .3 m), 50' (15 .2 m)Alarm Contacts 0 .3 A at 125 VAC, Max . Voltage 125
VAC, or 1A at 30 VDC, Max . Voltage 110 VDCAlarm Relay Setpoint 30° to 44°F (-1 .1° to 6 .7°C)Maximum Output Impedance 635Ω
Optional Relay Output Rating 25 A at 277 VAC 25 A at 120 VAC 1 HP at 120 VAC 2 HP at 277 VACEnclosure Metal handy box, 2" x 4", 4", x 4", or
2" x 4" weather resistantWiring Terminations AWG 18 leadwires, 3/4-14 NPSM (Z)
electrical connectionWarranty 3 years
COMBINATION AVERAGING SENSOR/FREEZESTATAS103759
DESCRIPTIONThe Minco AS103759 Chill Out™ combination sensor is a solid state low temperature cutout and duct averaging sensor all within one product . The AS103759 Series sensor provides a digital alarm contact and a 1000Ω 385 platinum resistance curve for accurate monitoring of your duct conditions . The solid state design and the 3/8" tubing eliminate concerns of gas leaks or kinking the capillary during installation . The AS103759 Series Sensor features a ultra flexible plenum-rated PVC coated galvanized steel armor sensor case . Switch points are factory set at 38°F (3 .3°C) but are easliy field adjustable . Upon a power loss the AS103759 Series Sensor reverts to its normal state .
FEATURES
• Averaging sensor and freeze stat in one sensor• Solid state technology• Mounts in any direction• Ultra flexible• Power loss detection• Field adjustable • Digital alarms signal
DIMENSIONS
SPECIFICATIONS
AS103759
WIRING
CONTACT “1”
ALARM OUTPUT [ORANGE](NO CONTACT, CLOSES WHEN POWER APPLIED)
ALARM OUTPUT [BLUE](NC CONTACT, OPENS WHEN POWER APPLIED)
24VAC (COM) [BLACK]24VAC [WHITE]
TEMPERATURE SENSOR [RED]TEMPERATURE SENSOR [RED]
RESET SWITCH (OPTIONAL)
LED
SET POINT ADJUSTMENT
CONTACT “2, 3”
ALARM OUTPUT, NO [ORANGE]
24VAC (H) [WHITE]24VAC (N) [BLACK]
TEMPERATURE SENSOR [RED]TEMPERATURE SENSOR [RED]
ALARM OUTPUT, NC [BLUE]
RESET SWITCH(OPTIONAL)
SET POINT ADJUSTMENT
LED
0
2468
24 VACor
24 VDC
110VAC
NEUTRAL
110 VAC OUTPUT (H)
110 VAC OUTPUT(N)
NEUTRAL
HOT
HOT
HOT
NEW!TEMPERATURE
1244
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
COMBINATION AVERAGING SENSOR/FREEZESTATAS103759
MODEL DESCRIPTIONAS103759PF Chill Out™ combination avearging sensor (1000 ohm 385 RTD) and freeze stat RELAY TYPE N Non-latching relay (auto reset) L Latching relay (manual reset) E Latching relay (remote reset) ELEMENT LENGTH 10 10’ (3.1m) 24 24’ (7.3m) 50 50’ (15.2m) CONTACT RATING 1 0.3 A relay rating 2 25 A VAC powered controller/coil 3 25 A VDC powered controller/coil ENCLOSURE STYLE N No enclosure S Standard handy box (2" x 4") L Dougle gang handy box (4" x 4") W Weather resistant utility box (2" x 4")
RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2 979TE-6001-8 Duct temperature element holder without boxDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!
1245
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40 to 221°F (-40 to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Mounting Directly to wall or customer supplied
enclosure using customer-supplied clips
Wiring Terminations 8', 24 AWG wire leads, type 81 sensors have 18" leads
Approvals CEWeight KTM 0 .01 lb (0 .005 Kg) KTMR 0 .05 lb (0 .02 Kg)Warranty 3 years
ENCAPSULATED THERMISTOR AND RTD SENSORKTM*, KTMR* SERIES
DESCRIPTIONThe Kele KTM, KTMR Series Thermistor and RTD encapsulated sensors provide remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is a highly stable thermistor material or platinum RTD .
The sensor is encapsulated with a low mass, high conductivity compound for good heat transfer characteristics . It is enclosed in a tough, miniature cylinder, 0 .17" (0 .43 cm) in diameter, which is small enough to be installed in most HVAC thermostat enclosures .
FEATURES• Three-year warranty• Wide selection of thermistor and RTD curves• Adaptable miniature sensor• High heat dissipation constant• Easy to mount with clips• Pre-aged, highly stable thermistor material
APPLICATIONKTM*The KTM* Series Encapsulated Sensor (white) is intended for indoor use only, in areas not subject to moisture or condensation . The sensor may be installed under the cover of an existing pneumatic thermostat . Caution should be exercised when applying the sensor to existing electric thermostats . Heat is often generated by anticipators or other electronics that will affect the sensor reading . The sensor operating range is 35° to 140°F (2° to 60°C) . Do not use in conditions below 35°F (2°C) or where condensation could occur .
KTM*RThe KTM*R Series Rugged Encapsulated Sensor (red) is suitable for temperature extremes and is immune to the effects of moisture and condensation . Precon uses a three-stage, rugged coating process to moistureproof any sensor which is to be used below ambient dewpoint . The sensor operating range is -30° to 230°F (-34° to 110°C) . Vibration or wire stress below 32°F (0°C) can cause the rugged coating to crack .
OPTIONS• 25' (7.6m) of 24 AWG zipcord• Matched sensor pairs• Rugged sensor coating
SPECIFICATIONS
KTM*
KTM*R
NEW!TEMPERATURE
1246
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Vents
Customer-Supplied Enclosure
Aluminum MountingClip Accessory PN-46
MountingSecure to enclosure or wall using cable ties, clips, or brackets. To obtain optimum performance, the sensor enclosure/assembly must be highly conductive. Any sensor element surrounded by insulating media will not perform properly at all temperatures or with the proper temperature response times. An accurate room sensor must have good ventilation and a high thermal-conducting metal which is in direct contact with the sensor. The enclosure must be insulated from the building mounting surface to limit wall temperature influence on the sensor.
Rear View
0.17 (0.43)
0.5 (1.27)
24 AWG, 8' (2.4m) zipcord lead wire 0.18
(0.46)
0.5 (1.27)
3.5 (8.89)
24 AWG, 8' (2.4m) zipcord lead wire
R Option Rugged Coating
KTM* KTMR*
in (cm)
MOUNTING
DIMENSIONS
ENCAPSULATED THERMISTOR AND RTD SENSORKTM*, KTMR* SERIES
ORDERING INFORMATION
KTM3 R X25 Example: KTM3R-X25 10,000Ω Type III thermistor with 3.5" rugged coating and 25' (7.6m) cable length
MODEL DESCRIPTION KTM3 10,000Ω encapsulated thermistor @ 77°F (25°C), Type III (gray leads) KTM21 2252Ω encapsulated thermistor @ 77°F (25°C), Type II (green leads) KTM22 3000Ω encapsulated thermistor @ 77°F (25°C), Type II (blue leads) KTM24 10,000Ω encapsulated thermistor @ 77°F (25°C), Type II (yellow leads) KTM27 100,000Ω encapsulated thermistor @ 77°F (25°C), Type II (gray leads) KTM42 20,000Ω encapsulated thermistor @ 77°F (25°C), Type IV (green leads) KTM81 100Ω encapsulated RTD @ 32°F (0°C), 385 platinum curve (yellow leads) KTM85 1000Ω encapsulated RTD @ 32°F (0°C), 385 platinum curve (blue leads) KTM91 1000Ω encapsulated RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS R Rugged (3.5" moistureproof coating; adding a # following the R extends the coating in feet) QD¼ Nylon insulated quick disconnect X25 25' (7.6m) lead length 24 AWG XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XZ Three wire RTD connections (Optional only on Type 81, standard on Type 71)
RELATED PRODUCTS PAGE T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281 T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279 T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!
1247
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .28°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Mounting Directly to wall or customer supplied
enclosure using customer-supplied clips
Wiring Terminations 8', 24 AWG wire leads, type 71 & 81 sensors have 18" leads
Approvals CEWeight ST-R* 0 .01 lb (0 .005 Kg) ST-R*R 0 .05 lb (0 .02 Kg)Warranty Lifetime
ENCAPSULATED THERMISTOR AND RTD SENSORSST-R*, ST-R*R SERIES
DESCRIPTIONThe PreCon ST-R*, ST-R*R Thermistor and RTD encapsulated Sensors provide precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is a highly stable precision thermistor material or platinum RTD .
The sensor is encapsulated with a low mass, high conductivity compound for good heat transfer characteristics . It is enclosed in a tough, miniature cylinder, 0 .17" in (0 .43 cm) diameter, which is small enough to be installed in most HVAC thermostat enclosures .
FEATURES• Lifetime warranty• Wide selection of thermistor and RTD curves• Adaptable miniature sensor• High heat dissipation constant• Easy to mount with clips• Pre-aged, highly stable thermistor material
TM
APPLICATIONST-R*
The Model ST-R* Encapsulated Thermistor Sensor (white) is intended for indoor use only, in areas not subject to moisture or condensation . The sensor may be installed under the cover of an existing pneumatic thermostat . Caution should be exercised when applying the sensor to existing electric thermostats . Heat is often generated by anticipators or other electronics that will affect the sensor reading . The sensor operating range is 35° to 140°F (2° to 60°C) . Do not use in conditions below 35°F (2°C) or where condensation could occur .ST-R*R
The Model ST-R*R Ruggedized Encapsulated Thermistor Sensor (red) is suitable for temperature extremes and is immune to the effects of moisture and condensation . PreCon uses a three-stage, ruggedized coating process to moisture proof any sensor which is to be used below ambient dewpoint . The sensor operating range is -30° to 230°F (-34° to 110°C) .
OPTIONS• 25' (7.6m) of 24 AWG zipcord• Matched sensor pairs• Rugged sensor coating
SPECIFICATIONS
ST-R*
ST-R*R
NEW!TEMPERATURE
1248
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Vents
Customer-Supplied Enclosure
Aluminum MountingClip Accessory PN-46
MountingSecure to enclosure or wall using cable ties, clips, or brackets. To obtain optimum performance, the sensor enclosure/assembly must be highly conductive. Any sensor element surrounded by insulating media will not perform properly at all temperatures or with the proper temperature response times. An accurate room sensor must have good ventilation and a high thermal-conducting metal which is in direct contact with the sensor. The enclosure must be insulated from the building mounting surface to limit wall temperature influence on the sensor.
Rear View
0.17 (0.43)
0.5 (1.27)
24 AWG, 8' (2.4m) zipcord lead wire 0.18
(0.46)
0.5 (1.27)
3.5 (8.89)
24 AWG, 8' (2.4m) zipcord lead wire
R Option Rugged Coating
KTM* KTMR*
in (cm)
MOUNTING
DIMENSIONS
ENCAPSULATED THERMISTOR AND RTD SENSORSST-R*, ST-R*R SERIES
ORDERING INFORMATION
ST-R3 R X25 Example: ST-R3R-X25 10,000Ω Type III thermistor with 3.5" rugged coating and 25' (7.6m) cable length
MODEL DESCRIPTION ST-R3 10,000Ω encapsulated thermistor @ 77°F (25°C), Type III (gray leads) ST-R21 2252Ω encapsulated thermistor @ 77°F (25°C), Type II (green leads) ST-R22 3000Ω encapsulated thermistor @ 77°F (25°C), Type II (blue leads) ST-R24 10,000Ω encapsulated thermistor @ 77°F (25°C), Type II (yellow leads) ST-R27 100,000Ω encapsulated thermistor @ 77°F (25°C), Type II (gray leads) ST-R42 20,000Ω encapsulated thermistor @ 77°F (25°C), Type IV (green leads) ST-R63 1000Ω nickel encapsulated RTD @ 70°F (21°C), (yellow leads) ST-R71 100Ω ultra high accurate encapsulated RTD @ 32°F (0°C), 385 platinum curve (blue leads) ST-R81 100Ω encapsulated RTD @ 32°F (0°C), 385 platinum curve (yellow leads) ST-R85 1000Ω encapsulated RTD @ 32°F (0°C), 385 platinum curve (blue leads) ST-R91 1000Ω encapsulated RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS R Rugged (3.5" moistureproof coating; adding a # following the R extends the coating in feet) QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XZ Three wire RTD connections (Optional only on Type 81, standard on Type 71)
RELATED PRODUCTS PAGE T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281 T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279 T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!
1249
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATION
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63
±0 .72°F (0 .40°C) Type 81,85 ±0 .27°F (0 .1°C) Type 91
±0 .054°F (0 .03°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 Curve
Temperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Mounting Directly to surfaceWiring Terminations 8', 24 AWG wire leads, type 81
sensors have 18" leadsApprovals CEWeight 0 .25 lb (0 .11 kg)Warranty 3 years
DESCRIPTIONThe Kele KTMP* Series Thermistor and RTD temperature probe is designed for applications requiring a small sensor with a fast thermal response . Constructed with stainless steel housing, the probe is available with a choice of several thermistor and RTD sensor curves .
FEATURES• Wide selection of thermistor and RTD curves• Fast response time• 0.19" round x 0.50" long (0.48 x 1.27 cm) housing
MINI PROBE THERMISTOR AND RTD SENSORKTMP* SERIES
SPECIFICATIONS
MODEL DESCRIPTIONKTMP3 10,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (gray leads) KTMP21 2252Ω mini probe thermistor @ 77˚F (26˚C), Type III (green leads) KTMP22 3000Ω mini probe thermistor @ 77˚F (26˚C), Type III (blue leads) KTMP24 10,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (yellow leads) KTMP27 100,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (gray leads) KTMP42 20,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (green leads) KTMP81 100Ω mini probe RTD @ 32˚F (0˚C), 385 Platinum Curve (yellow leads) KTMP85 1000Ω mini probe RTD @32˚F (0˚C), 385 Platinum Curve (blue leads) KTMP91 1000Ω mini probe RTD @ 32˚F (0˚C), 375 Platinum Curve (green leads) OPTIONS R Rugged moistureproof coating 3.5" R# Rugged moistureproof coating. # equals number of feet of the coating X25 25' (7.6m) lead length 24 AWG XN NIST certificate of conformance XN1 NIST certicate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certicate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XZ Three wire RTD connections (Type 81 only)
KT-MP3 XN1 Example: KT-MP3-XN1 10,000Ω mini probe sensor with NIST one reference point certificate
KTMP*
RELATED PRODUCTS PAGE T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281 T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279 T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277 TCC-12 Thermal conductive compound tube, 12 ml 1298
NEW!TEMPERATURE
1250
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 81,85 ±0 .27°F (0 .15°C) Type 91 ±0 .05°F (0 .03°C)Sensor Type Thermistor 2 .252 kΩ, 3Ω, 10 kΩ Type II & III, 20 kΩ,
100 kΩ RTD Type 63 1000Ω Nickel Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C)over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise the
temperature by 1°C)Mounting Directly to surfaceWiring Terminations 24 AWG, UL low voltage to 105°C
Connections 8' (2 .4m) of 24 AWG prestripped pigtails, type 71 & 81 sensors have 18" leads
Approvals CEWeight 0 .25 lb (0 .11 kg)Warranty Lifetime
MINI PROBE THERMISTOR AND RTD SENSORST-MP* SERIES
DESCRIPTIONThe Precon ST-MP* Series Thermistor and RTD temperature probe is designed for applications requiring a small sensor with a fast thermal response . Constructed with stainless steel housing, the probe is available with a choice of several thermistor and RTD sensor curves .
FEATURES• Lifetime warranty• Wide selection of thermistor and RTD curves• Fast response time• 0.19" round x 0.50" long (0.48 x 1.27 cm) housing
TM
SPECIFICATIONS
ST-MP*
MODEL DESCRIPTIONST-MP3 10,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (gray leads) ST-MP21 2252Ω mini probe thermistor @ 77˚F (26˚C), Type III (green leads) ST-MP22 3000Ω mini probe thermistor @ 77˚F (26˚C), Type III (blue leads) ST-MP24 10,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (yellow leads) ST-MP27 100,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (gray leads) ST-MP42 20,000Ω mini probe thermistor @ 77˚F (26˚C), Type III (green leads) ST-MP63 1000Ω nickel mini probe RTD @ 70˚F (26˚C), Type III (yellow leads) ST-MP71 (not available in this style) ST-MP81 100Ω mini probe RTD @ 32˚F (0˚C), 385 Platinum Curve (yellow leads) ST-MP85 1000Ω mini probe RTD @32˚F (0˚C), 385 Platinum Curve (blue leads) ST-MP91 1000Ω mini probe RTD @ 32˚F (0˚C), 375 Platinum Curve (green leads) OPTIONS R Rugged moistureproof coating 3.5" R# Rugged moistureproof coating. # equals number of feet of the coating X25 25' (7.6m) lead length 24 AWG XN NIST certificate of conformance XN1 NIST certicate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certicate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XZ Three wire RTD connections (Type 81 only)
ST-MP3 XN1 Example: ST-MP3-XN1 10,000Ω mini probe sensor with NIST one reference point certificate
RELATED PRODUCTS PAGE T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281 T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279 T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277 TCC-12 Thermal conductive compound tube, 12 ml 1298
NEW!
1251
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .50°F (0 .28°C) RTD ±0 .60°F (0 .33°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature RangeThermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficient
Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD 100% (no drift platinum)Heat Dissipation 2 .7 mW/°C (power needed to raise
the temperature 1°C)Mounting Directly to wall or customer supplied
enclosure using customer-supplied clips
Wiring Terminations 8', 24 AWG wire leads, type 81 sensors have 18" leads
Approvals CEWeight KTM*S 0 .15 lb (0 .07 Kg) KTM*SC 0 .45 lb (0 .2 Kg)Warranty 3 years
STAINLESS STEEL SHEATH THERMISTOR AND RTD SENSORKTM*S, KTM*SC SERIES
DESCRIPTIONThe Kele Stainless Steel Sheath Thermistor and RTD Sensors provide remote temperature sensing for building automation systems and mechanical equipment room instrumentation .
The active sensing element is a highly stable thermistor material or platinum RTD . The sensing element is rugged and sealed with a thermally conductive compound in a versatile 3" (7 .6 cm)- long stainless steel tube . The probe is waterproof, and the sensor is ideal for use in refrigeration cases or as a strap-on sensor for pipes .
KTM*SThe KTM*S Stainless Steel Sheath Sensors are suitable for direct application to pipe surfaces for chilled or hot water measurement . They are also used for freezer cases where moisture protection is important . These rugged strap-on sensors come with 8' (2 .4m), 24-gauge zipcord leads .
KTM*SCThe KTM*SC Stainless Steel Sheath Sensors come with a rugged, 25' (7 .6m) cable that allows for termination away from areas of condensation . It is an ideal choice for freezer case applications . FEATURES
• Three-year warranty• Wide selection of thermistor and RTD curves• Tip sensitive for precise temperature response• Durable 304 stainless steel casing• Easy to mount to wall, box, or pipe• Waterproof probeAPPLICATION
Strap-on Applications: Where it is not practical to install immersion wells, the Stainless Steel Sheath Sensors may be strapped to the pipe . The -C option provides a 25' (7 .6m) rugged cable that may be strapped on the outside of the pipe insulation . Pipe strap accessory (APB-28) provides a bracket under the insulation to hold the sensor securely in place .
SPECIFICATIONS
KTM*S
KTM*SC
NEW!TEMPERATURE
1252
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
0.25(0.64)
3.0(7.62)
Polyolefin Sheath
in(cm)
Stainless TubeWhen used as a strap-on sensor, best results are obtained whenconductive compound (TCC-12) is applied between the sensor and the pipe. In addition, the sensor should be inserted under insulation with at least 2' (0.61m) on each side of the sensor. Adjustable pipe bracket APB-28 is available for use with this sensor.
Tie Rap orAdjustable Pipe Bracket
MountingSecure to wall or pipe using cable ties, clips, or brackets.
WiringTerminate with butt splices or solder connections. Wirenuts are not recommended.
MOUNTING DIMENSIONS
STAINLESS STEEL SHEATH THERMISTOR AND RTD SENSORKTM*S, KTM*SC SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONKTM3S 10,000Ω stainless steel thermistor @ 77°F (25°C), Type III (gray leads)KTM21S 2252Ω stainless steel thermistor @ 77°F (25°C), Type II (green leads)KTM22S 3000Ω stainless steel thermistor @ 77°F (25°C), Type II (blue leads)KTM24S 10,000Ω stainless steel thermistor @ 77°F (25°C), Type II (yellow leads)KTM27S 100,000Ω stainless steel thermistor @ 77°F (25°C), Type II (gray leads)KTM42S 20,000Ω stainless steel thermistor @ 77°F (25°C), Type IV (green leads)KTM81S 100Ω stainless steel RTD @ 32°F (0°C), 385 platinum curve (yellow leads)KTM85S 1000Ω stainless steel RTD @ 32°F (0°C), 385 platinum curve (blue leads)KTM91S 1000Ω stainless steel RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS C 25'(7.6m) 22 AWG cable non-pleum (not available with XZ option) QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG (KTM*S only) XCP25 25' (7.6m) Non-shielded 22AWG plenum cable (not with “c” models) XD Dual sensors in one probe (Not with "C" models) XL Custom length insertion probes 1" to 60" XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XZ Three wire RTD connections (optional only on Type 81, standard on Type 71, not available with XC25 and XCP25)
KTM3S C Example: KTM3S-C 10,000Ω stainless steel sheath thermistor with 25' (7.6m) cable
RELATED PRODUCTS PAGE#20 Self-vulcanizing stretch tape, 6' (1.83m) roll, 1" (2.54 cm) wide APB-28 Adjustable pipe bracket 2"-8" diameter 1391PN-46 Aluminum sensor holder with adhesive backing 1391T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
NEW!
1253
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature RangeThermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Mounting Directly to wall or pipe using
standard clips and bracketsWiring Terminations 8' (2 .4m) of 24 AWG pigtails with
prestripped ends, Type 71 & 81 sensors have 18" leads
Approvals CEWeight ST-R*S 0 .15 lb (0 .07 Kg) with no options ST-R*SC 0 .45 lb (0 .2 Kg) with no optionsWarranty Lifetime
STAINLESS STEEL SHEATH THERMISTOR AND RTD SENSORSST-R*S, ST-R*SC SERIES
DESCRIPTIONThe PreCon Stainless Steel Sheath Thermistor and RTD Sensors provide precision remote temperature sensing for building automation systems and mechanical equipment room instrumentation . The active sensing element is a highly stable precision thermistor material or platinum RTD .The sensing element is ruggedized and sealed with a thermally conductive compound in a versatile 3" (7 .6 cm) long stainless steel tube . The probe is waterproof, and the sensor is ideal for use in refrigeration cases, or as a strap-on sensor for pipes .
ST-R*SThe Model ST-R*S Stainless Sheath Sensor is suitable for direct application to pipe surfaces for chilled or hot water measurement . It is also used for freezer cases where moisture protection is important . This rugged strap-on sensor comes with an 8-ft (2 .4m), 24-gauge zipcord lead .
ST-R*SC The Model ST-R*SC Stainless Steel Sheath Sensor comes with a rugged 25-ft (7 .6m) cable when ordered with the "C" option . The 25-ft (7 .6m) cable allows for termination away from areas of condensation . It is an ideal choice for freezer case applications .
FEATURES
• Lifetime warranty• Wide selection of thermistor and RTD curves• Tip sensitive for precise temperature response• Durable 304 stainless steel casing• Easy to mount to wall, box, or pipe• Waterproof probe
TM
APPLICATION
Strap-on Applications: Where it is not practical to install immersion wells, the Stainless Sheath Thermistor Sensor may be strapped to the pipe . The "C" option provides a 25' (7 .6m) rugged cable that may be strapped on the outside of the pipe insulation . Pipe strap accessory (APB-28) provides a bracket to hold the sensor securely in place .
SPECIFICATIONS
ST-R*S
ST-R*SC
NEW!TEMPERATURE
1254
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
0.25(0.64)
3.0(7.62)
Polyolefin Sheath
in(cm)
Stainless TubeWhen used as a strap-on sensor, best results are obtained whenconductive compound (TCC-12) is applied between the sensor and the pipe. In addition, the sensor should be inserted under insulation with at least 2' (0.61m) on each side of the sensor. Adjustable pipe bracket APB-28 is available for use with this sensor.
Tie Rap orAdjustable Pipe Bracket
MountingSecure to wall or pipe using cable ties, clips, or brackets.
WiringTerminate with butt splices or solder connections. Wirenuts are not recommended.
MOUNTING DIMENSIONS
STAINLESS STEEL SHEATH THERMISTOR AND RTD SENSORSST-R*S, ST-R*SC SERIES
ORDERING INFORMATION
MODEL DESCRIPTION ST-R3S 10,000Ω stainless steel thermistor @ 77°F (25°C), Type III (gray leads) ST-R21S 2252Ω stainless steel thermistor @ 77°F (25°C), Type II (green leads) ST-R22S 3000Ω stainless steel thermistor @ 77°F (25°C), Type II (blue leads) ST-R24S 10,000Ω stainless steel thermistor @ 77°F (25°C), Type II (yellow leads) ST-R27S 100,000Ω stainless steel thermistor @ 77°F (25°C), Type II (gray leads) ST-R42S 20,000Ω stainless steel thermistor @ 77°F (25°C), Type IV (green leads) ST-R63S 1000Ω nickel stainless steel RTD @ 70°F (21°C), (yellow leads) ST-R71S 100Ω ultra high accurate stainless steel RTD @ 32°F (0°C), 385 platinum curve (blue leads) ST-R81S 100Ω stainless steel RTD @ 32°F (0°C), 385 platinum curve (yellow leads) ST-R85S 1000Ω stainless steel RTD @ 32°F (0°C), 385 platinum curve (blue leads) ST-R91S 1000Ω stainless steel RTD @ 32°F (0°C), 375 platinum curve (green leads) OPTIONS C 25’ (7.6m) 22 AWG cable non-plenum (not available with XZ option) QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XCP25 25' (7.6m) Non-shielded 22AWG plenum cable (not with “c” models) XD Dual sensors in one probe (Not with "C" models) XL Custom length insertion probes 1" to 60" XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F (0°C) XN2 NIST certificate, two reference points 32°F/158°F (0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F (0°C/25°C/70°C) XP Matched sensor pair, matched to ±0.1°F, 0.05°C (must order two sensors) XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XZ Three wire RTD connections (optional only on Type 81, standard on Type 71, not available with XC25 and XCP25)
ST-R3S C Example: ST-R3S-C 10,000Ω stainless steel sheath thermistor with 25' (7.6m) cable
RELATED PRODUCTS PAGE#20 Self-vulcanizing stretch tape, 6' (1.83m) roll, 1" (2.54 cm) wide APB-28 Adjustable pipe bracket 2"-8" diameter 1391PN-46 Aluminum sensor holder with adhesive backing 1391T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
NEW!
1255
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III, 20 kΩ,
100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 Curve
Temperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsEnclosure Metal handy boxMounting Directly to pipe using adjustable straps, 6" pipe
standard, 10" with optionWiring Terminations 8' (2 .44m), 24 AWG zipcord using crimp or
solder connection, type 71 & 81 have 18" leadsApprovals CEWeight 1 .0 lb (0 .45 kg)Warranty Lifetime
STRAP-ON THERMISTOR AND RTD SENSORSST-STP* SERIES
4.0(10.2)
in(cm)
1.50 (3.81)
1.00 (2.54)1.70(4.3)
DESCRIPTION
The Precon ST-STP* Thermistor and RTD Series strap-on sensor provides precision monitoring of a pipe surface temperature . The unique design features the sensor attached to a flexible copper plate that will conform to the pipe surface . The rubber pad provides spring tension plus surrounds the copper plate to eliminate the effects of ambient air temperature .
FEATURES
• Wide selection of thermistor and RTD curves• Adjustable steel straps fit multiple pipe sizes• Fexible copper plate conforms to pipe surface• Copper plate is insulated from ambient air• Lifetime warranty• Ultra high accuracy optional
TM
APPLICATION
Strap-on Applications: Where it is not practical to install immersion wells, the ST-STP* Strap on Sensor is a great substitute . The copper plate at the bottom of the flexible rubber base assures good thermal conductivity to the sensor . The sensor is positioned directly behind and attached to the copper conduction plate . Each ST-STP* utilizes a metal threaded ring clamp to secure it to the pipe and models 6" and under include a pair of high strength zip ties as an optional mounting method . A small amount of thermal conducting compound (TCC-12) helps to ensure maximum conductivity .
DIMENSIONS
SPECIFICATIONS
ORDERING INFORMATION
MODEL DESCRIPTIONST-STP3 10,000Ω strap-on thermistor @ 77˚F (26˚C), Type III (gray leads)ST-STP21 2252Ω strap-on thermistor @ 77˚F (26˚C), Type II (green leads)ST-STP22 3000Ω strap-on thermistor @ 77˚F (26˚C), Type II (blue leads)ST-STP24 10,000Ω strap-on thermistor @ 77˚F (26˚C), Type II (yellow leads)ST-STP27 100,000Ω strap-on thermistor @ 77˚F (26˚C), Type II (gray leads)ST-STP42 20,000Ω strap-on thermistor @ 77˚F (26˚C), Type IV (green leads)ST-STP63 1000Ω nickel strap-on RTD @ 70˚F (21˚C) (yellow leads)ST-STP71 100Ω strap-on RTD @ 32˚F (0˚C) (blue leads)ST-STP81 100Ω strap-on RTD @ 32˚F (0˚C) (yellow leads)ST-STP85 1000Ω strap-on RTD @32˚F (0˚C) (blue leads)ST-STP91 1000Ω strap-on RTD @ 32˚F (0˚C) (green leads) OPTIONS XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) XW Weather resistant housing X10 10" (25.4 cm) maximum pipe size
ST-STP3 XW Example: ST-STP3-XW 10,000Ω strap-on thermistor sensor with weather resistant housing
ST-STP*
RELATED PRODUCTS PAGET81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298UR Moisture-resistant three-wire butt splice 229
NEW!TEMPERATURE
1256
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .50°F (0 .4°C)Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω 385 curveTemperature Range -40° to 302°F (-40° to 150°C)Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <±0 .1°C driftHeat Dissipation Thermistor, 3 mW/°C (power needed
to raise the temperature by 1°C)Enclosure Galvanized metal boxWiring Terminations 10" of 22 AWG wire or terminal stripApprovals RoHS, CEWeight 0 .8 lb (0 .36 Kg)Warranty 5 years
ORDERING INFORMATION
in(cm)
A/*-SStrap-On
1 .9(4 .8)
4 .0 (10 .2)
5 .0(12 .7)
1 .5 x 1 .5(3 .8 x 3 .8)Foam Pad
WormGear
DESCRIPTIONThe ACI Strap On Series Thermistor and RTD Sensors are designed specifically for HVAC system temperature control . The strap-on sensors come in thermistor and RTD sensor curves compatible with most BAS systems available today . Strap-on sensors come with a handy box and stainless steel strap for 5" (12 .7 cm) pipes .
The ACI Strap-On Sensor mounts directly to a 2" to 5" (5 .1 to 12 .7 cm) pipe . Clean off any insulation or rust to promote solid contact of the copper plate to the pipe . Wrap and tighten the strap around the pipe and compress the foam fully for a firm mount . Faster response can be achieved by using TCC-12 thermal conductive compound .
FEATURES
• Fits pipes 2" to 5" (5.1 to 12.7 cm)• Five-year warranty• Stainless steel strap
DIMENSIONS
STRAP-ON THERMISTOR AND RTD SENSORSACI STRAP-ON SERIES
SPECIFICATIONS
A/AN-S-GD
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298
MODEL DESCRIPTIONA/AN-S-GD Strap-on sensor with 5" (12.7 cm) diameter strap, 10 kΩ thermistor, Type 3A/CP-S-GD Strap-on sensor with 5" (12.7 cm) diameter strap, 10 kΩ thermistor, Type 2A/20K-S-GD Strap-on sensor with 5" (12.7 cm) diameter strap, 20 kΩ thermistor, Type 42A/100K-S-GD Strap-on sensor with 5" (12.7 cm) diameter strap, 100 kΩ thermistor, Type 27A/100-2W-S-GD Strap-on sensor with 5" (12.7 cm) diameter strap, 100Ω RTD, 385 curveA/1K-2W-S-GD Strap-on sensor with 5" (12.7 cm) diameter strap, 1000Ω RTD, 385 curve
NEW!
1257
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .55°F (0 .30°C)Sensor Type Thermistor 10 kΩ Type II & III, 20 kΩ, 100 kΩ RTD 100Ω, 1000Ω, 385 curve; 1000Ω, 375 curveTemperature Range 32° to 158°F (-0° to 70°C)Stability Thermistor < 0 .036°F (0 .02°C) per year RTD 0 .14°C with 6,000 continuous hours
at 400°CHeat Dissipation 2 .7 mW/°C (power need to raise the
temperature 1°C), 0 .4°C/mW at 0°C
Enclosure JB 2x4 steel handy box BB BAPI Box IP66 rated UV-resistant
plastic enclosure BB2 BAPI Box 2 IP66 rated UV-resistant
plastic enclosure BB4 BAPI Box 4 IP44 nylon and plastic enclosureMounting Straps or Clamps to pipeWiring Terminations 22 AWG wire, etched teflon leads Approvals CE, RoHSWeight JB, BB4 0 .75 lb (0 .34 kg) BB, BB2 1 .0 lb (0 .45 kg)Warranty Lifetime
DESCRIPTIONThe BAPI BA Strap-On Temperature Thermistor and RTD Sensors are designed specifically for HVAC systems to monitor water temperature in retrofit or filled pipe applications . They fit around the outside of a pipe and measure the water temperature by sensing the surface temperature of the pipe . They come in thermistor and RTD sensors and feature etched teflon leadwires to perform under real world conditions .
FEATURES• Strap-on or clamp-on models• Lifetime limited sensor warranty• Wide selection of mounting styles
STRAP-ON THERMISTOR AND RTD SENSORSBA/ STRAP-ON SERIES
SPECIFICATIONS
BA/10K-2-STP-BB4
BA/10K-2-STP-JB
BA/10K-2-SB4
BA/10K-2-S-JB
DIMENSIONS
BA/10K2-J-BB4 BA/10K-2-S-JB
NEW!TEMPERATURE
1258
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
BA/10K2-S-BB2 BA/10K2-S-BB
ORDERING INFORMATION
Example: BA/10K-2-S-JB BAPI Clamp-on 10,000Ω RTD thermistorwith JB box
BA/ 10K2 S JB
MODEL DESCRIPTION BA/ Probe temperature sensor REQUIRED SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type II 10K3 10,000Ω thermistor @ 77°F (25°C), Type III 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve 1K375 1000Ω RTD @32°F (0°C), 375 curve REQUIRED PROBE TYPE AND LENGTH S Clamp-on for 2" to 4" dia. pipe and 1.25" copper plate pad STP Spring-loaded for 5" to 14.5" dia. pipe and 1.25" copper plate pad REQUIRED MOUNTING ENCLOSURE JB 2" x 4" J-box with 1/2" knockouts BB BAPI-Box - IP66, NEMA 4 UV resistant polycarbonate (Not available for spring-loaded units) BB2 BAPI-Box 2 - IP66, NEMA 4 UV resistant polycarbonate BB4 BAPI-Box 4 - IP44, nylon and plastic
STRAP-ON THERMISTOR AND RTD SENSORSBA/ STRAP-ON SERIES
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
DIMENSIONS
NEW!
1259
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATION MODEL DESCRIPTIONST-TS3 10,000Ω tank sensor thermistor @ 77˚F (26˚C), Type III (gray leads) ST-TS21 2252Ω tank sensor thermistor @ 77˚F (26˚C), Type II (green leads) ST-TS22 3000Ω tank sensor thermistor @ 77˚F (26˚C), Type II (blue leads) ST-TS24 10,000Ω tank sensor thermistor @ 77˚F (26˚C), Type II (yellow leads) ST-TS27 100,000Ω tank sensor thermistor @ 77˚F (26˚C), Type II (gray leads) ST-TS42 20,000Ω tank sensor thermistor @ 77˚F (26˚C), Type IV (green leads) ST-TS63 1000Ω nickel tank sensor RTD @ 70˚F (21˚C) (yellow leads) ST-TS71 100Ω tank sensor RTD @ 32˚F (0˚C) (blue leads) ST-TS81 100Ω tank sensor RTD @ 32˚F (0˚C) (yellow leads) ST-TS85 1000Ω tank sensor RTD @32˚F (0˚C) (blue leads) ST-TS91 1000Ω tank sensor RTD @ 32˚F (0˚C) (green leads) OPTIONS XC25 25' (7.6m) lead length cable XD Dual sensors XN1 NIST Certificate, one reference point 32˚F (0˚C) XN2 NIST Certificate, two reference point 32˚F (0˚C) XN3 NIST Certificate, three reference point 32˚F (0˚C) XP Matched pair XPA Ultra high accuracy, thermistors only, ±0.135˚F (0.075˚C) S Stainless steel thermowell
ST-TS3 XN1 Example: ST-TS3-XN1 10,000Ω tank sensor thermistor with NIST one reference point certificate
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III, 20 kΩ,
100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 CurveTemperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)
Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise the
temperature by 1°C)Mounting Lower sensor into cooling tower tank,
support cable at wiring box, use water proof connectors
Wiring Terminations 8' (2 .44m) 2 conductor for SJO 18/2 water resistant cable
Approvals CEWeight 0 .8 lb (0 .36 kg)Warranty Lifetime
SUBMERSIBLE THERMISTOR AND RTD SENSORSST-TS* SERIES
DESCRIPTIONThe Precon ST-TS* Series Tank Thermistor and RTD Sensors provide precision remote temperature sensing for cooling tower tanks for use in building automation systems . The active sensing element is a highly stable precision thermistor material or platinum RTD .
The sensing element is rugged and sealed in a thermally conductive compound . The housing is a standard brass immersion well that has the weight to keep the sensor submersed and is compatable for all liquids suitable with brass . Water resistant cable is used .
FEATURES• Lifetime warranty• Wide selection of thermistor and RTD curves• Brass thermowell for quick temperature response• Water resistant cable• Ultra high accuracy optional• One piece design
TM
SPECIFICATIONS
1/2" NPT
3.25(8.26)
0.5 (1.27)
5.13(13.03)
4.94(12.54)
in(cm)
ST-TS*
DIMENSIONS
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279 T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281 T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277 UR Moisture-resistant three-wire butt splice 229
ST-TS*
NEW!TEMPERATURE
1260
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Type 63 ±0 .72°F (0 .40°C) Type 71 ±0 .054°F (0 .03°C) Type 81, 85 ±0 .27°F (0 .15°C) Type 91 ±0 .54°F (0 .30°C)Sensor Type Thermistor 2 .252 kΩ, 3 kΩ, 10 kΩ Type II & III,
20 kΩ, 100 kΩ RTD Type 63 1000Ω Nickel Type 71, 81 100Ω Pt 385 Curve Type 85 1000Ω Pt 385 Curve Type 91 1000Ω Pt 375 Curve
Temperature Range Thermistor/RTD -40° to 221°F (-40° to 105°C)Temperature Coefficient Thermistor Negative temperature coefficient RTD Positive temperature coefficientTemperature Stability Thermistor 0 .24°F (0 .13°C) over five years RTD <0 .09°F (0 .05°C) over 5 yearsHeat Dissipation 2 .7 mW/°C (power needed to raise
the temperature by 1°C)Mounting Directly to stud or boltWiring Terminations 24 AWG, UL low voltage to 105°C
Connections 8’ (2 .4m) of 24 AWG prestripped pigtails, type 71 & 81 sensors have 18” leads
Approvals CEWeight 0 .1 lb (0 .05 kg) w/o optionsWarranty Lifetime
DESCRIPTIONThe Precon ST-L* Series Thermistor and RTD Ring Lug Sensors provide precision equipment temperature sensing for building automation systems . The active sensing element is made of a highly stable, precision thermistor material or platinum RTD .
The ring lug design allows the sensor to be mounted to a bolt or stud to monitor equipment temperature . A common use is to monitor motor winding temperature by mounting to the motor housing . It comes in sizes to accommodate 1/4", 5/16" and 3/8" studs or bolts .
FEATURES• Lifetime warranty• Wide selection of thermistor and RTD curves• Ring lug mounting for equipment monitoring• Three stud sizes available• Ultra high accuracy optional
TM
RING LUG THERMISTOR AND RTD SENSORST-L* SERIES
SPECIFICATIONS
ST-L*
NEW!
1261
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
RING LUG THERMISTOR AND RTD SENSORSST-L* SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONST-L3 10,000Ω lug thermistor @ 77˚F (26˚C), Type III (gray leads)ST-L21 2252Ω lug thermistor @ 77˚F (26˚C), Type II (green leads)ST-L22 3000Ω lug thermistor @ 77˚F (26˚C), Type II (blue leads)ST-L24 10,000Ω lug thermistor @ 77˚F (26˚C), Type II (yellow leads)ST-L27 100,000Ω lug thermistor @ 77˚F (26˚C), Type II (gray leads)ST-L42 20,000Ω lug thermistor @ 77˚F (26˚C), Type IV (green leads)ST-L63 1000Ω nickel lug RTD @ 70˚F (21˚C) (yellow leads)ST-L71 100Ω lug RTD @ 32˚F (0˚C) 385 Platinum Curve (blue leads)ST-L81 100Ω lug RTD @ 32˚F (0˚C) 385 Platinum Curve (yellow leads)ST-L85 1000Ω lug RTD @32˚F (0˚C) 385 Platinum Curve (blue leads)ST-L91 1000Ω lug RTD @ 32˚F (0˚C) 375 Platinum Curve (green leads) OPTIONS 25 1/4" Stud Size 31 5/16" Stud size 38 3/8" Stud size XN1 NIST certificate, one reference point 32°F(0°C) QD¼ Nylon insulated quick disconnect ¼" X25 25' (7.6m) lead length 24 AWG XC25 25' (7.6m) lead length 24 AWG jacketed cable XCP25 25' (7.6m) non-shielded 22AWG plenum cable XN NIST certificate of conformance XN1 NIST certificate, one reference point 32°F(0°C) XN2 NIST certificate, two reference points 32°F/158°F(0°C/70°C) XN3 NIST certificate, three reference points 32°F/77°F/158°F(0°C/25°C/70°C) ST-L3 25 XN1 Example: ST-L3-25-XN1 10,000Ω mini probe sensor with NIST one reference point certificate
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
NEW!TEMPERATURE
1262
NEW!TEMPERA
TURE
20
NEW!
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
DIMENSIONS
Accuracy Thermistor ±0 .36°F (0 .20°C) RTD ±0 .55°F (0 .30°C)Sensor Type Thermistor 10kΩ, Type II & III RTD 100Ω, 1000Ω 385 curve,
1000Ω 375 curveTemperature Range Thermistor -40° to 221°F (-40° to 105°C) RTD 1002 212° to 410°F (100° to 210°C) 1k1 -328° to 32°F (-200° to 0°C) 1K3 392° to 1112°F (200° to 600°C)Stability <0 .036°F (0 .02°C) per year, 0 .14°C
with 6,000 continuous hours at 400°C
Heat Dissipation 2 .7 mW/°C (power need to raise the temperature 1°C), 0 .4°C/mW at 0°C
Enclosure BB BAPI Box-IP66, UV-resistant,
polycarbonate BB2 BAPI Box 2-IP66, UV-resistant,
polycarbonate BB4 BAPI Box 4-IP44, Nylon & plastic WP NEMA 3R, cast aluminumMounting Directly to wall or pipeWiring Terminations 22 AWG wire, etched teflon leads Approvals CE, RoHSWeight RPFEP5 0 .55 lb (0 .25 Kg) RPFEP10 0 .6 lb (0 .27 Kg) RPFEP15 0 .65 lb (0 .29 Kg)Warranty Lifetime
DESCRIPTIONThe BAPI BA Series Extreme Temperature Thermistor and RTD Sensors are designed for use in applications from -200° to 600°C . The parts come with stainless steel probe and packages to handle moisture and wide temperature ranges .
FEATURES• Three watertight enclosure• Limited Lifetime warranty
EXTREME TEMPERATURE SENSORSBA/*RPFEP SERIES
SPECIFICATIONS
BA/10K2RPFEP5BB2 BA/10K2RPFEP5BB4
BA/10K2RPFEP5BB
BA/10K2RPFEP5BB BA/10K2RPFEP5BB2
NEW!
1263
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
EXTREME TEMPERATURE SENSORSBA/*RPFEP SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONBA Remote probe sensor REQUIRED SENSOR TYPE 10K2 10K thermistor @77°F (25°C), Type 2, -40° to 221°F (-40° to 105°C) 10K3 10K thermistor @77°F (25°C), Type 3, -40° to 221°F (-40° to 105°C) 1002 100 ohm RTD @ 32°F (0°C), 385 curve, range 212° to 410°F (100° to 210°C) 1K1 1000 ohm RTD @ 32°F (0°C), 385 curve, range -328° to 32°F (-200° to 0°C) 1K2 1000 ohm RTD @ 32°F (0°C), 385 curve, range 212° to 410°F (100° to 210°C) 1K3 1000 ohm RTD @ 32°F (0°C), 385 curve, range 392° to 1,112°F (200° to 600°C) REQUIRED PROBE TYPE AND LENGTH RPFEP5 Sensor with 5' wire leads, PTFE jacketed cable for 1K3, fiberglass insulated for 10K2,10K3, 1002, 1K1 & 1K2 RPFEP10 Sensor with 10' wire leads, PTFE jacketed cable for 1K3, fiberglass insulated for 10K2,10K3, 1002, 1K1 & 1K2 RPFEP15 Sensor with 15' wire leads, PTFE jacketed cable for 1K3, fiberglass insulated for 10K2,10K3, 1002, 1K1 & 1K2 REQUIRED MOUNTING ENCLOSURE BB IP66, UV resistant BB2 IP66, UV resistant, polycarbonate BB4 IP66, UV resistant, nylon & plastic WP NEMA 3R weatherproof UV resistant enclosure
BA 1K1 RPFEP10 BB Example: BA1K1RPFEP10BB 1000 ohm 385 curve-328 to 32°F, with 10' fiberglass insulated leads and BAPI-box
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
DIMENSIONS
BA/10K2RPFEP5BB4 BA/10K2RPFEP5WP
NEW!TEMPERATURE
1264
NEW!TEMPERA
TURE
20
NEW!
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD ±0 .55°F (0 .30°C)Sensor Type Thermistor 10kΩ, Type II & III RTD 100Ω, 1000Ω 385 curve, 1000Ω 375
curveTemperature Range 32° to 158°F (-0° to 70°C)Stability Thermistor <0 .036°F (0 .02°C) per year RTD 0 .14 °C with 6,000 continuous hours
at 400°CHeat Dissipation 0 .4°C/mW at 0°C, 2 .7 mW/°C (power
need to raise the temperature 1°C)
Enclosure/Weight HB Hanging Bracket with 30" jacketed
cable; 0 .55lb (0 .25 Kg) BB BAPI Box- IP66, UV-resistant
polycarbonate; 0 .8 lb (0 .36 Kg) BB2 BAPI Box 2- IP66, UV-resistant
polycarbonate; 0 .8 lb (0 .36 Kg)Mounting Directly to wall or with hanging
bracketWiring Terminations 22 AWG wire, etched teflon leads Approvals CE, RoHSWarranty Lifetime
THERMOBUFFER TEMPERATURE SENSORSBA/*-TB SERIES
DESCRIPTIONThe BAPI BA Series Thermobuffer Sensors are designed specifically for freezers and coolers to simulate the temperature of the contents and not the air temperature . The fluid-filled chamber allows for slower reaction to abrupt temperature changes from opening or closing the cooler door . The Thermobuffer helps eliminate spikes and short cycling of refrigeration equipment .
FEATURES
• Fluid-filled to mimic core temperatures• Decreases false high limit alarms• Stainless steel or aluminum
SPECIFICATIONS
BA/10K2TBM3042HB
BA/10K2TBM3044BB
BA/10K2TBM3044BB2
NEW!
1265
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATION
Example: BA/100TBM3044HB Thermobuffer probe 100Ω RTD 385 curve, with hanging bracket and jacketed cable.
BA/ 10K3 TB-M3044
MODEL DESCRIPTION BA/ Probe temperature sensor REQUIRED SENSOR TYPE 10K2 10,000Ω thermistor @ 77°F (25°C), Type II 10K3 10,000Ω thermistor @ 77°F (25°C), Type III 100 100Ω RTD @32°F (0°C), 385 curve 1K 1000Ω RTD @32°F (0°C), 385 curve REQUIRED PROBE TYPE AND LENGTH TB-M3042 Thermobuffer probe 2" long, 304 stainless chamber TB-M3044 Thermobuffer probe 4" long, 304 stainless chamber TB-MAL2 Thermobuffer probe 2" long, aluminum chamber TB-MAL4 Thermobuffer probe 4" long, aluminum chamber HB Hanging bracket with jacketed cable BB BAPI box NEMA 4X BB2 BAPI box 2 NEMA 4X
HB
RELATED PRODUCTS PAGE T85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281T91U-XR 1000 ohm, Type 91 4-20 mA temperature transmitter, custom rangeable 1277
THERMOBUFFER TEMPERATURE SENSORSBA/*-TB SERIES
DIMENSIONS
THERMAL-THERMOBUFFER
BB-THERMOBUFFER
BB2-THERMOBUFFER
NEW!TEMPERATURE
1266
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
S241HC SensorSensor Type 1000Ω ±0 .1% @ 32°F (0°C)Temperature Coefficient
0 .00375 Ω/Ω/°CSensitivity 2 .1Ω/°F @ 32°F (0°C)Measurement Range -58° to 932°F (-50° to 500°C)Probe Material 304 StainlessWiring Terminations Two-wire nickel coated stranded
copper, 24" long 22 AWG fiberglass insulated
Weight 0 .5 lb (0 .23 Kg)Warranty 3 years
TT111H-0800 Fixed TransmitterSupply Voltage 8 .5-30 VDC unregulatedSensor Input 1000Ω platinum 0 .00375 Ω/Ω/°CMeasurement Range 0° to 800°F (-18° to 427°C)Signal Output 4-20 mAMaximum Output Impedance 750Ω ± 0 .1% @ 24 VDC minAccuracy Calibration accuracy ±0 .05% of spanOperating Temperature -58° to 160°F (-50° to 70°C)WellOperating Pressure 3000 psig (20 .7 mPa) maxWell Material 304 Stainless steelWeight 0 .35 lb (0 .16 Kg)Warranty 3 years
1.1(2.79)
5.5(13.97)
24.0(60.94)
1.53(3.89)
0.51(1.30) 0.14
(0.36)
0.91(2.31)
Mounting Hole0.141" dia (0.36)
1/2" Pipe Thread (typical both sides)
0.25(0.64)
2.0(5.10)
S241HC Probe
in(cm)
TT111H-0800 Transmitter
zerospan
1 2 3 4
DESCRIPTIONThe Minco S241HC High Temperature RTD Sensor is directly inserted to monitor the temperature of boiler stacks, steam lines, and other applications where the temperature may rise above the operating range of standard sensors . When used with the TT111H-0800 Transmitter, a 4-20 mA output is provided that is linear from 0° to 800°F (-18° to 427°C) .
FEATURES• All stainless steel probe• 24" high temperature leads• Small transmitter size• Well available (WS-6)• High temperature span, 0° to 800°F (-18° to 427°C)
+
+–
–
4 3 2 1
TT111H-0800Transmitter
24 VDCPowerSupply
S241HCSensor
4-20 mASignal
GFF-50Accessory
MOUNTING DIMENSIONS
HIGH TEMPERATURE SENSOR & TRANSMITTERS241HC, TT111H-0800
SPECIFICATIONS
S241HC
MODEL DESCRIPTIONTT111H-0800 High temperature transmitter 0° to 800°F (-18° to 427°C)S241HC High temperature probe, limited to 932°F (500°C)
GFF-50
WS-6
TT111H
RELATED PRODUCTS PAGEDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994GFF-50 1/2” galvanized mounting flange TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298WS-6 Stainless steel well 1293
NEW!
1267
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supply Voltage 8 .5 to 35 VDC loop poweredSignal Output 4-20 mA @ 400ΩAccuracy ±0 .50% of spanMeasurement Range -148° to 32°F (-100° to 0°C)-58 to 122°F (-50° to 50°C)32 to 212°F (0° to 100°C)Sensor Type PM Curve 100Ω platinum three-wire 0 .00385 Ω/Ω/°C PF Curve 1000Ω platinum two-wire 0 .00385 Ω/Ω/°CDisplay 3-1/2 digit LCD, updates 3 times per second
Operating Temperature Probe -328° to 248°F (-200° to 120°C) Transmitter -13° to 185°F (-25° to 85°C)Materials Probe: material Stainless steel Thermal vial 6 oz (175 ml) polyethylene bottle
with cap Thermowell Delrin Enclosure PolycarbonateWiring Terminations 22 AWG Teflon insulated with TFE
jacket overallDimensions 4 .5" L x 2 .6" W x 2 .2" D (11 .5 x 6 .5 x 5 .6 cm)Weight 0 .97 lb (0 .43 Kg)Warranty 3 years
THERMAL VIAL TEMPERATURE SENSING SYSTEMAS10 SERIES
DESCRIPTIONThe Minco AS10 Thermal Vial Temperature Sensing System is ideal for freezers, coolers, and refrigeration units to monitor the temperature of the contents, rather than the air temperature . The vial is filled with fluid such as glycol or water which emulates the material being stored . The corresponding 4-20 mA output is matched calibrated to the RTD for improved system accuracy .
FEATURES• Sensor and transmitter calibrated together• Optional display• Sealed vial eliminates leakage• NIST certification include
SPECIFICATIONS
AS10
ORDERING INFORMATION
MODEL DESCRIPTION AS103282 Thermal vial sensing system
PM 100Ω 0.00385 Ω/Ω/°C platinum curvePF 1000Ω 0.00385 Ω/Ω/°C platinum curve
LLL Cable length LLL in 1" incrementsF Display in °FB No display
Z Range -148° to 32°F (-100° to 0°C)M Range -58° to 122°F (-50° to 50°C)C Range 32° to 212°F (0° to 100°C)
Sample order:AS103282PM72FZ: Thermal vial 100Ω, 385 curve platinum RTD with 72" cable, display and Z temperature range
RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995AC101540 Thermal Vial mounting bracket
NEW!TEMPERATURE
1268
NEW!TEMPERA
TURE
20
NEW!
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Accuracy ±0 .12% @ 0°CStability <0 .1°C/yearTime Constant 1 secMeasurement Range -4° to 350°F (-20° to 177°C)Sensor Type Type PW 1000Ω platinum RTD TCR 0 .00375
Ω/Ω/°C (385 available) Type PD 100Ω platinum RTD TCR 0 .00385
Ω/Ω/°CMaterials Of Construction
Polyamide film with elastomer cover, silicone rubber
Mounting Adhesive backing (flat surface) AC766 pipe-mount kit with tape (conduit) #20 stretch tape (round surface)
Wiring Terminations 26 AWG stranded copperDimensions S665PDY48BC 0 .472" W X 0 .197"H, 48" leads
(1 .2 X 0 .5 cm) S667PDY40BC 0 .600" W X 0 .197"H, 40" leads
(1 .5 X 0 .5 cm)Weight 0 .1 lb (0 .05 Kg)Warranty 3 years
Wire Nuts
Field Wires
Buckle
Thermal-Ribbon™
S469PW #20 Stretch TapeFill in withInsulation
T91UTransmitter
Utility Box
Strap
AC766
Conduit
Pipe Insulation
THERMAL RIBBON RTDS101144, S469, S665PDY48BC, S667PDY40BC
DESCRIPTIONThe Minco Model S101144 and S469 Self-adhesive, Flexible Ribbons RTD Sensors feature imbedded RTDs to sense temperature . The platinum 1000Ω RTD sensor is inserted and used with a transmitter or directly into a BAS system . The self-adhesive backing makes installation easy and it adheres to all types of surfaces . The fl exible thin ribbon maximizes contact to the measured surface which makes response time very fast . The accuracy is the same as immersion sensors .
The Minco S665 & S667 Series RTD Sensors are 100 ohm flexible ribbon sensors that are easily adapatble to most any clean, flat surface . The S665 Series is a thin film sensor with an elastomer cover . The S667 Series is a silicone rubber, elastomer covered thin film sensor with a foil backing, capable of submersion applications .
FEATURES• Small, flexible, and thin• Platinum stability and
accuracy• Fast response• Easy mounting• Self-adhesive backing• Pliable
MOUNTING
APPLICATION• Metal pipe• Metal tanks• Windows• Glass displays• Condensation control
with dew point sensor
SPECIFICATIONS
S469PW
Close-up of sensor tip
S101144PW
#20
AC766
NEW!
1269
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
THERMAL RIBBON RTDS101144, S469, S665PDY48BC, S667PDY40BC
40 (101.6) 36 (91.44)0.47 (1.10) 1.5 (3.81)
0.20(0.51)
0.38(0.95)
Thickness0.08 (0.20) max Thickness
0.05 (0.12) maxS101144PW S469PW
in(cm)
DIMENSIONS
ORDERING INFORMATION
MODEL DESCRIPTIONS101144PW 1000Ω, 375 thermal tab RTD with adhesive backingS469PW 1000Ω, 375 rubber strip RTD with adhesive backingS665PDY48BC 100Ω Thermal tab thin film adhesive back elastomer coverS667PDY40BC 100Ω Thermal tab thin film adhesive back silicone rubber, waterproof
RELATED PRODUCTS PAGE#20 Self-vulcanizing stretch tape, 6’ (1.83m) roll, 1” (2.54 cm) wide AC766 Pipe mount kit with #20 stretch tape and 5’ (1.5m) nylon strap T81U Series Temperature transmitter for type 81, 385 platinum curve sensor, track mounted 1281T91U Series Temperature transmitter for type 91, 375 platinum curve sensor, track mounted 1277
NEW!TEMPERATURE
1270
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
5' (1.5)1.3' (3.2)
0.4(0.9)
Thickness0.4 (0.9) max
TE200G
in(cm)
Accuracy Thermistor ±0 .36°F (0 .2°C) RTD Platinum ±0 .54°F (0 .3°C) Nickel ±0 .72°F (0 .4°C)Sensor Type Thermistor 2,252Ω, 3,000Ω, 10,000Ω Type II & III, 20,000Ω RTD 100Ω Platinum 385 curve, 1,000Ω
Platinum 385 curve, 1,000Ω Nickel, 1,000Ω Balco
Measurement Range -4° to 221°F (-20° to 105°C)Materials Of Construction AluminumWiring Terminations 5' (1 .5 m) of 22 AWG stranded copperApprovals CE, RoHsWeight 0 .4 lb (0 .18 Kg)Warranty 1 year
DESCRIPTIONThe Greystone Energy Systems Model TE200G Glass Thermistor and RTD Sensors feature imbedded sensors to sense temperature . The model TE200G is a single point glass temperature sensor encapsulated in an aluminum probe . Small in size and ideal for mounting on windows to provide fast response .
FEATURES• Small and thin• Fast response• Easy mounting• Pliable
APPLICATION• Metal pipe• Metal tanks• Windows• Glass displays• Condensation control with dew point sensor
DIMENSIONS
THERMAL GLASS THERMISTOR AND RTD SENSORSTE200G SERIES
SPECIFICATIONS
TE200G
ORDERING INFORMATION
RELATED PRODUCTS PAGET85U-XR 1000 ohm, Type 85 4-20 mA temperature transmitter, custom rangeable 1279T81U-XR 100 ohm, Type 81 4-20 mA temperature transmitter, custom rangeable 1281#20 Self-vulcanizing stretch tape, 6' (1.83m) roll, 1" (2.54 cm) wide
MODEL DESCRIPTIONTE200G Glass sensor OPTIONS 2 100Ω RTD @ 32°F (0°C); 385 Platinum curve (red, red, white leads) 12 1,000Ω RTD @ 32°F (0°C); 385 Platinum curve (gray leads) 13 1,000Ω RTD @ 32°F (0°C); Nickel (gray leads) 5 1,000Ω RTD @ 32°F (0°C); Balco (???? leads) 14 10,000Ω Thermistor @ 77°F (25°C); Type III (light gray leads) 6 3,000Ω Thermistor @ 77°F (25°C); (light blue leads) 24 10,000Ω Thermistor @ 77°F (25°C); Type II (yellow leads) 20 20,000Ω Thermistor @ 77°F (25°C); (green leads) 8 2,252Ω Thermistor @ 77°F (25°C); (gray leads)
TE200G 12 Example: TE200G-12 1,000Ω RTD @ 32°F (0°C); 385 platinum curve (gray leads).
NEW!
1271
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Power Supply10.5-45 VDC
4-20 mASignal
2.25(5.72)
1.8(4.57)
1.0(2.54)
Height
LOOP
TEMPSENSOR
TEMPSENSOR
LOOP
Type 911000Ω 375 Platinum
RTD Sensor(sold separately)
LOOP UP
Loop PowerLED
SnapTrack
Power Supply10.5-45 VDC
4-20 MASignal
MODEL ST-T90E
Loop Power LED
SENSOR
JP1
Room TransmitterUniversal Transmitter
Supply Voltage 10 .5-45 VDCSignal Output 4-20 mA, two-wire, loop-powered
Limit: 25 mAMinimum Output Impedance 675Ω @ 24 VDCAccuracy Sensor ±0 .54°F (0 .30°C) Transmitter 0 .1°F or 0 .2% of spanRangeability -30° to 250°F (34° to 121°C)
Min span of 40°F (22°C)Rangeability Zero -30° to 210°F (-34 .4° to 98 .9°C) Minimum Span 40°F (4 .4°C) Usable Range -30° to 250 °F (-34 .4° to 121 .1°C)Sensor Type 1000Ω thin film platinum TCR
0 .00375Ω/Ω/°CSensitivity 2 .1Ω/°F @ 32°FOperating Humidity 0% to 95% non-condensingOperating Temperature 0° to 140°F (-18° to 60°C)Approvals CE (EN50081-1, EN50082-
1) Optional CE (EN50081-2, EN50082-2) Industrial RF/EM hardened
Weight 0 .3 lb (0 .14 kg) either style "E" or "K"Warranty 18 months
1000 OHM 375 PLATINUM RTD FIXED TEMPERATURE TRANSMITTERSST-T90 SERIES
DESCRIPTIONThe Kele Model ST-T90 Series is a fixed range 1000Ω, 375 platinum room temperature transmitter that provides stable, accurate room sensing for temperature control of Building Automation Systems . The attractive white vented housing mounts easily and is constructed of durable plenum rated plastic with a white enameled aluminum faceplate . The ST-T910E is the Executive style room transmitter amd the ST-T90K is the Design style room transmitter .
FEATURES• Low cost• High accuracy• No drift platinum RTD sensors• Panel mounting for duct, immersion, OSA, and room• UL 94V-0 plenum rated housing• Used with Type 91 sensor
SPECIFICATIONS
ST-T90KST-T90E
WIRING
NEW!TEMPERATURE
1272
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
The Room Temperature application uses a vented room enclosure designed to minimize self-heating for accurate room measurement .The Duct Temperature application is designed for direct mounting on sheet metal duct systems . The sensor is point sensitive and comes standard with a 4-7/8" (12 .38 cm) insertion depth . Averaging probes come in 24' (7 .3m) lengths and mount in a weather-resistant metal box .The Immersion Temperature application is designed to be threaded directly into a 1/8" NPT well with a 3-1/4" (8 .2 cm) insertion . The wells are available in brass or 304 stainless steel and are designed for pipe insertion using a 1/2" threaded saddle (Thredolet®) .The Outside Air Temperature application uses a wall bracket with a vented weather shield to minimize the effect of rain or snow and other weather related influences . This rugged enclosure and bracket will ensure long life even in severe weather conditions .
1000 OHM 375 PLATINUM RTD FIXED TEMPERATURE TRANSMITTERSST-T90 SERIES
ORDERING INFORMATION
MODEL DESCRIPTIONST-T90E Room temperature transmitter ST-T90K Designer room temperature transmitter RANGE 0 40° to 90°F (4.4° to 32.2°C) Room transmitter only 1 20° to 120°F (-6.7° to 48.8°C) All mounting types 2 -20° to 140°F (-29° to 60°C) OSA, duct, or immersion 3 0° to 100°F (-18° to 38°C) All mounting types 4 30° to 240°F (-1° to 116°C) OSA, duct, or immersion
11 0° to 35°C (32° to 97°F) All mounting types 12 -30° to 45°C (-22° to 113°F) OSA, duct, or immersion 13 0° to 100°C (32° to 212°F) OSA, duct, or immersion 14 0° to 50°C (32° to 122°F) All mounting types
ST-T90E 1- Example: ST-T90E-1 Room temperature transmitter with a range of 20° to 120°F (-6.7° to 48.8°C)
RELATED PRODUCTS PAGEDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994KT1 Mounting screwdriver 1/16" allen key 1390TCC-111 Thermal conductive compound 111 ml tub 1398TCC-12 Thermal conductive compound tube, 12 ml 1398
APPLICATION
NEW!
1273
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supply Voltage 10 .5-45 VDC Signal Output 4-20 mA, two-wire, loop-poweredMaximum Output Impedance 675Ω @ 24 VDCSensor Element 1000Ω thin film platinum TCR
0 .00375Ω/Ω/°CAccuracy Sensor accuracy: ±0 .2% of 1000Ω at
0°C Transmitter accuracy 0 .1°F or 0 .2% of spanRangeability -30° to 250°F (34° to 121°C)
(Min span of 40°F (22°C)) Standard: 40° to 90°F (4° to 32°C)
Rangeability Zero -30° to 210°F (-34 .4° to 98 .9°C) Minimum Span 40°F (4 .4°C) Usable Range -30° to 250°F (-34 .4° to 121 .1°C)Sensitivity 2 .1Ω/°F @ 32°FOperating Temperature 0° to 140°F (-18° to 60°C)Approvals CE (EN50081-1, EN50082-1);
Optional CE (EN50081-2, EN50082-2) Industrial RF/EM hardened
Weight 0 .3 lb (0 .14 kg) either style "E" or "K"Warranty 18 months
4.50(11.43)
3.23(8.20)
in(cm)
2.75 (6.98)
4.5(11.43)
1.5(3.8)
0.18(.47)
DESCRIPTIONThe Kele ST-T91 Rangeable Platinum Room Temperature Transmitter Series provides stable, accurate room sensing for temperature control and building automation systems, and it is CE approved for level-one applications . The attractive vented housing mounts easily and is constructed of a durable plastic with a tan enameled aluminum faceplate . The ST-T91E is the Executive style room transmitter and the ST-T91K is the Design style room transmitter .
The ST-T91 Series has a loop-powered 4-20 mA output with a standard temperature range of 40° to 90°F (4° to 32°C), although other ranges can be field calibrated between -30° to 250°F (-34° to 121°C) . To adjust the ST-T91 Series, set the DIP switches to match the desired range, and use the zero and span pots to fine tune . A high accuracy digital ohmmeter and decade box are required .
The ST-T91 Series has a special 20 mA loop calibration test signal to provide easy system verification . Simply move the bottle plug jumper from norm to 20, and the transmitter will output a constant 20 mA . The loop up LED provides power indication for the 4-20 mA output .
FEATURES• High accuracy• No-drift platinum• Loop calibration test signal• Low cost• Decorative enclosure• Loop power LED indication• CE approved (commercial and industrial)
DIMENSIONS
SPECIFICATIONS
ST-T91E
RANGEABLE PLATINUM ROOM TEMPERATURE TRANSMITTERST-T91 SERIES
ST-T91K
NEW!TEMPERATURE
1274
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
PlateMountingScrews
Cover Mounting1/16" Allen Screws
Toggle bolts or other direct wall-mount screws can be used where conduit is not required. Adapters are not required when mounting directly to electrical outlet boxes.
Basic model comes with screw terminal block, tan decorator faceplate, two #6-32 screws for handy-box mounting, and two #6 x 1 screws for direct wall mount-ing. Cover screws are #6-32 with a 1/16" Allen key head.
Wire AccessHole
Optional Customer-Supplied Handy Box
The sensor should be mounted approximately 5' (1.5m) above the floor, on an interior wall, and away from any heating or cooling generating devices.
TanFaceplateStandard
Toggle bolts or other direct wall-mount screws can be used where back box is not required. Adapters are not required when mounting directly to electrical outletboxes.
The sensor should be mounted approximately 5' (1.5m) above the floor, on an interior wall, out of the sun, and away from any heating or cooling generating devices.
MountingScrews
Wire AccessHole
Mounting Back Plate
Option Board Clip
CoverLocking1/16" Allen ScrewsInstalled as needed
Self-LatchingCover
Basic model comes with screw terminal block, two #6-32 screws for handy-box mounting, and two #6 x 1" screws for direct wall mounting. Locking cover screws are #6-32with a 1/16" Allen key head, installed as needed.
To BASController
Power Supply10.5-45 VDC
4-20 mASignal
MODEL ST-T91E,K
Loop Power LED
12345
5 4 3 2 1
ON
NORM 20
SENSOR
JP1
SPAN
ZERO
ST-T91E ST-T91K
Norm = Normal operation
20 = Forced 20 mA output
Loop LED indicates proper loopand power connections
±
ORDERING INFORMATION
ST-T91E XR1 Example: ST-T91E-XR1 Rangeable platinum room temperature transmitter with calibration 20° to 120°F
MODEL DESCRIPTIONST-T91K Designer room temperature transmitter, 4-20 mA = 40° to 90°F (4.4° to 32.2°C)ST-T91E Executive room temperature transmitter, 4-20 mA = 40° to 90°F (4.4° to 32.2°C) CE CERTIFICATION – Commercial CE (EN50081-1 and EN50082-1) EMC Industrial CE, RF/EM hardened (EN50081-2 and EN50082-2) OPTIONS XR Custom range (specific range) XR1 Range option = 20° to 120°F (-6.7° to 48.8°C) XR2 Range option = 0° to 100°F (-17.7° to 37.8°C) XR3 Range option = 30° to 100°F (-1.1° to 37.8°C) XR11 Range option = 32° to 97°F (0° to 35°C) XR14 Range option = 32° to 122°F (0° to 50°C)
MOUNTING WIRING
RANGEABLE PLATINUM ROOM TEMPERATURE TRANSMITTERST-T91 SERIES
RELATED PRODUCTS PAGEDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994KT1 Mounting screwdriver 1/16" allen key 1390
NEW!
1275
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supply Voltage 9 .4-35 VDCSignal Output 4-20 mA, two-wireMaximum Output Impedance 730Ω @ 24 VDC
(Supply voltage - 9 .4 VDC)/0 .02AAccuracy ±0 .5°F (0 .3°C) @ room temp or
±0 .8% of span operating @ 24 VDC transmitter
Linearity Transmitter: ±0 .1% of span (negligible)
Stability Sensor: Better than 0 .09°F (0 .05°C) per year
Rangeability Zero: -10° to 60°F (-23° to 15°C) Span:35° to 150°F (2° to 66°C)
Span Adjust Non-interactingZero Adjustments Non-interactingSensor Element 100Ω platinum RTD, 385 curve
1000Ω platinum RTD, 375 curveOperating Temperature -40° to 185°F (-40° to 85°C)Enclosure Enclosure Plastic housing with
aluminum faceplateWiring Terminations Screw terminals, non-polar, connect
either wayDimensions 4 .5"H x 2 .75"W x 1 .58"D
(11 .43 x 6 .98 x 4 .01 cm)Weight 0 .3 lb (0 .14 kg)Warranty 3 years
PLATINUM 1000 OHM SPACE TEMPERATURE TRANSMITTERTT859 SERIES
DESCRIPTIONThe Minco TT859 Platinum 1000Ω Space Temperature Transmitter is DIP switch rangeable . Non-interacting multi-turn controls provide a constant resolution adjustment . Gold-plated DIP switches ensure stable overlapping incremental selections between -10° to 60°F (-23 to 15°C) for zero and 35° to 150°F (2° to 66°C) for span . The well ventilated housing allows quick and accurate temperature sensing and effective heat dissipation from the circuit . Repeatability is excellent because the TT859 uses a platinum RTD as the sensing element . Calibrated system accuracy of the TT859 is typically 0 .25°F (0 .14°C) with optional sensor matching .Once installed, it can be field-calibrated or re-ranged through coarse switch adjustments and fine tune with multi-turn zero and span pots . The two-wire termination points are insensitive to power supply polarity . This prevents reversed hookups and simplifies installation .
FEATURES• Substitute for discontinued Hy-Cal transmitters• 4-20mA signal• Optimum flow-through ventilation• Easy zero and span ranging (non-interacting)• On-line calibration• Non-polar connections
SPECIFICATIONS
TT859PW
NEW!TEMPERATURE
1276
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Housing Top View Housing Side View
2.75(6.98)
1.58(4.01)
4.50(11.43)
Transmitter mounted in cover
1 2 3 4
ON
1 2
3 4
5 6
7 8
1 2
3 4
SPAN ADJ.
ZERO ADJ.
24 VDC
4-20mA Signal
+ –
+ –
RTD
TT859
WIRINGDIMENSIONS
PLATINUM 1000 OHM SPACE TEMPERATURE TRANSMITTERTT859 SERIES
ORDERING INFORMATION
TT859 Space temperature transmitter PW 1000Ω 0.00375 Ω/Ω/°C platinum curve 1 4-20mA DC output S Range codes per Minco letter ranges (0°/100°F) (-18°/38°C) H Range codes per Minco letter ranges (40°/90°F) (4°/32°C) 1 No calibration data, sensor or transmitter 2 Sensor/transmitter matched at 0°C with NIST
TT859 Example: TT859PW1S1 Room transmitter, 375 curve platinum RTD, ranged for 0°/100°F
PW 1 S 1
MODEL DESCRIPTION
TT859Decorative Wall-Mount
Temperature Transmitter
RELATED PRODUCTS PAGEDCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!
1277
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supply Voltage 10 .5-45 VDCSignal Output 4-20 mA, two-wireMaximum Output Impedance 675Ω @ 24 VDC375Ω with displaySensor Element 1000Ω platinum TCR 0 .00375
Ω/Ω/°CAccuracy 0 .1°F or 0 .2% of spanRangeability T91U Zero -30° to 210°F (-34° to 98 .9°C) Minimum Span 40°F (4 .4°C) Usable range -30° to 250°F (-34 .4° to 121 .1°C) T91H Zero 200° to 960°F (93° to 515°C) Minimum Span 40°F (4 .4°C)
Usable range 200° to 1000°F (93 .3° to 573 .8°C) T91L Zero -300° to -8°F (-184° to -22°C) Minimum Span 40°F (4 .4°C) Usable range -300° to 32°F (-184 .4° to 0°C)Display Display option (XTD) 3-1/2 digit LCD,
NEMA 4 (IP65)Operating Humidity 0% to 95% non-condensingOperating Temperature 0° to 140°F (-18° to 60°C)Dimensions 1"H x 1 .8"W x 2 .25"L
(2 .5 x 4 .6 x 5 .7 cm)Approvals CE (EN50081-1, EN50082-1)
Optional CE (EN50081-2, EN50082-2) Industrial RF/EM Hardened
Weight 0 .16 lb (0 .07 kg) w/o optionsWarranty 18 months
1000 OHM 375 PLATINUM RTD RANGEABLE TRANSMITTERT91H, T91L, T91U SERIES
1.8 (4.57)
2.25(5.72)
Height:0.75 (1.9)including
track
LOOP
TEMPSENSOR
TEMPSENSOR
LOOP
LOOP UP MODEL T91U
SPA
N
ZE
RO
12345 ON
NORMAL 20
in(cm)
DESCRIPTIONThe Kele T91U 1000Ω RTD rangeable transmitter is a range selectable, two-wire 4-20 mA RTD transmitter used with Type 91 1000Ω platinum RTD sensors . The transmitter is available in six standard ranges, or it can be set for any range between -30° to 280°F (-34° to 156°C) with a minimum span of 40°F (22°C) .
To adjust the T91U, set the DIP switches to match the desired range, and use the zero and span pots to fine tune . A high accuracy digital ohmmeter and decade box are required .
The T91U has a special 20 mA loop calibration test signal to provide easy system verification . Simply move the bottle plug jumper from norm to 20, and the transmitter will output a constant 20 mA . The loop-up LED provides power indication for the 4-20 mA output .
The T91H and T91L are specialty units for very high temperature and very low temperatures respectively . Both units are rangeable within their specialty limits .
FEATURES• DIP switch rangeable• Loop-calibration test signal• Low cost• Snap-track mounting• Loop-powered LED indication• Fits into card slot of ST-U91 housing• Very high-range and low-range models availableCE
approved (commercial and industrial)• Conformal coated
DIMENSIONS
SPECIFICATIONS
T91U
T91U-13-WE-XTD
NEW!TEMPERATURE
1278
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Power Supply10.5-45 VDC
4-20 mASignal
LOOP
TEMPSENSOR
TEMPSENSOR
LOOP
1000Ω 375 PlatinumRTD Sensor
(sold separately)
LOOP UP MODEL T91U
SP
AN
ZE
RO
Loop Power LED
12345 ON
NORMAL 20
MOUNTING
1000 OHM 375 PLATINUM RTD RANGEABLE TRANSMITTERT91H, T91L, T91U SERIES
ORDERING INFORMATION
T91U 2 DExample: T91U-2-D Transmitter with range of -20° to 140°F (-29° to 60°C) mounted and wired in duct sensor enclosure † Indicate at time of order* Includes sensor mounted and wired. Check temperature limits in the catalog for each probe
MODEL DESCRIPTIONT91U 4-20 mA RTD transmitter standard rangeabilityT91H 4-20 mA RTD transmitter high temperature rangeability (XR range only) T91L 4-20 mA RTD transmitter low temperature rangeability (XR range only) CE CERTIFICATION – Commercial CE (EN50081-1 and EN50082-1) EMC Industrial CE, RF/EM hardened (EN50081-2 and EN50082-2) RANGE 2 -20° to 140°F (-29° to 60°C) (T91U only) 3 0° to 100°F (-18° to 38°C) (T91U only) 4 30° to 240°F (-1° to 116°C) (T91U only) 12 -22° to 113°F (-30° to 45°C) (T91U only) 13 32° to 212°F (0° to 100°C) (T91U only) 14 32° to 122°F (0° to 50°C) (T91U only) XR† Special Range (See previous page for rangeability limits) SENSOR TYPE — Transmitter only D ST-D91-XW duct sensor* O ST-O91 outside air sensor* W ST-W91-XW immersion sensor* with brass well WE ST-W91-E-XW immersion sensor* without well WS ST-W91-S-XW immersion sensor* with stainless steel well AV ST-AV91H averaging sensor* XTD Digital display option for (D) duct or (W) immersion sensors XWM Single gang weather resistant box (Mounted without sensor)
RELATED PRODUCTS PAGEAS2PW055P000XX1 Low temperature probe, limited to -50°F (-46°C) DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994S241HC High temperature probe, limited to 932°F (500°C)
NEW!
1279
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
DESCRIPTIONThe Kele T85U 1000Ω RTD rangeable transmitter is a range selectable, two-wire 4-20 mA RTD transmitter used with Type 85 1000Ω platinum RTD sensors . The transmitter is available in six standard ranges, or it can be set for any range between -30° to 280°F (-34° to 156°C) with a minimum span of 40°F (22°C) .
To adjust the T85U, set the DIP switches to match the desired range, and use the zero and span pots to fine tune . A high accuracy digital ohmmeter and decade box are required .
The T85U has a special 20 mA loop calibration test signal to provide easy system verification . Simply move the bottle plug jumper from norm to 20, and the transmitter will output a constant 20 mA . The loop-up LED provides power indication for the 4-20 mA output .
FEATURES• Class A Sensors• Dip switch rangeable• Loop calibration test signal• Low cost• Snap-track mounting• Loop-powered LED indication• Fits into card slot of ST-U85 housing• CE approved (commercial and industrial)• Available as a complete assembly• Conformal coated
1000 OHM RTD RANGEABLE TRANSMITTERT85U SERIES
T85U
T85U-13-WE-XTD
1.8 (4.57)
2.25(5.72)
Height:0.75 (1.9)includes
track
LOOP
TEMPSENSOR
TEMPSENSOR
LOOP
LOOP UP MODEL T85U
SPA
N
ZE
RO
12345 ON
NORMAL 20
in(cm)
DIMENSIONS
APPLICATIONS• Duct• OSA• Immersion• Averaging
Supply Voltage 10 .5-45 VDCSignal Output 4-20 mA, two-wire, loop-powered,
Limit 25 mAMaximum Output Impedance 675Ω @ 24 VDCSensor Accuracy DIN Class A, ±0 .27°F (±0 .15°C)Transmitter Accuracy ±0 .02°F (±0 .01°C) at 77°F (25°C)Rangeability -30° to 250°F (-34° to 121°C)
Minimum span of 40°F (22°C)Rangeability Zero -30° to 210°F (-34 .4° to 98 .9°C) Minimum Span 40°F (4 .4°C) Usable Range -30° to 250°F (-34 .4° to 121 .1°C)
Loop Calibration Output 20 mA ± 0 .2%
Sensor Element 1000Ω platinum TCR 0 .00385 Ω/Ω/°COperating Humidity 0% to 95% non-condensingOperating Temperature 0° to 140°F (-18° to 60°C)Wiring Terminations TerminalsApprovals CE (EN50081-1, EN50082-1) Optional CE (EN50081-2, EN50082-
2) Industrial RF/EM HardenedWeight 0 .16 lb (0 .07 kg) w/o optionsWarranty 18 months
SPECIFICATIONS
NEW!TEMPERATURE
1280
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Power Supply10.5-45 VDC
4-20 mASignal
LOOP
TEMPSENSOR
TEMPSENSOR
LOOP
1000Ω 385 PlatinumRTD Sensor
(sold separately)
LOOP UP MODEL T85U
SPA
N
ZE
RO
Loop Power LED
12345 ON
NORMAL 20
WIRING
1000 OHM RTD RANGEABLE TRANSMITTERT85U SERIES
ORDERING INFORMATION
T85U 2 DExample: T85U-2-D Transmitter with range of -20° to 140°F (-29° to 60°C) mounted and wired in duct sensor enclosure † Indicate at time of order* Includes sensor mounted and wired. Check temperature limits in the catalog for each probe.
MODEL DESCRIPTIONT85U 4-20 mA RTD transmitter standard rangeability CE CERTIFICATION – Commercial CE (EN50081-1 and EN50082-1) EMC Industrial CE, RF/EM hardened (EN50081-2 and EN50082-2) RANGE 2 -20° to 140°F (-29° to 60°C) 3 0° to 100°F (-18° to 38°C) 4 30° to 240°F (-1° to 116°C) 12 -22° to 113°F (-30° to 45°C) 13 32° to 212°F (0° to 100°C) 14 32° to 122°F (0° to 50°C) XR† Special Range (See previous page for rangeability limits) SENSOR TYPE — Transmitter only D ST-D85-XW duct sensor* O ST-O85 outside air sensor* W ST-W85-XW immersion sensor* with brass well WE ST-W85-E-XW immersion sensor* without well WS ST-W85-S-XW immersion sensor* with stainless steel well AV ST-AV85H averaging sensor* XTD Digital display option for (D) duct or (W) immersion sensors XWM Single gang weather resistant box (Mounted without sensor)
RELATED PRODUCTS PAGEDCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!
1281
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATIONMODEL DESCRIPTIONT71U 4-20 mA RTD transmitter RANGE 2 -20° to 140°F (-29° to 60°C) 3 0° to 100°F (-18° to 38°C) 4 30° to 240°F (-1° to 116°C) XR† Special Range SENSOR TYPE — Transmitter only D ST-D71-XW duct sensor* O ST-O71 outside air sensor* W ST-W71-XW immersion sensor* with well AV ST-AV71H averaging sensor* XWM Single gang weather resistant box (mounted without sensor)
T71U 2 D Example: T71U-2-D transmitter with range of -20° to 140°F (-29° to 60°C) mounted and wired in duct sensor enclosure † Indicate at time of order* Includes sensor mounted and wired
Supply Voltage 10 .5-45 VDCSignal Output 4-20 mA, loop-poweredMaximum Output Impedance 675Ω @ 24 VDCSensor Element 100Ω platinumAccuracy 0 .1°F or 0 .2% of span TCR
0 .00385 Ω/Ω/°CRangeability -30° to 250°F (-34° to 121°C)
Minimum Span 40°F (22°C)
Rangeability Zero -30° to 210°F (-34 .4° to 98 .9°C) Minimum Span 40°F (4 .4°C) Usable Range -30° to 250°F (-34 .4° to 121 .1°C)Operating Humidity 0% to 95% non-condensingOperating Temperature 0° to 140°F (-18° to 60°C)Dimensions 1 .8"W x 2 .25"L x 1"H
(4 .6 x 5 .7 x 2 .5 cm)Approvals CEWeight 0 .16 lb (0 .07 kg) w/o optionsWarranty 18 months
LOOP
NO
RM
TEMPSENSOR
TEMPSENSOR
20
LOOP
1.8(4.58)
in(cm)
2.25(5.72)
Height: 1.0 (2.54)
100ΩRTD Sensor
(sold separately)
4-20 mASignal
Power Supply10.5-45 VDC
DESCRIPTIONThe Kele T81U Platinum RTD Rangeable Transmitter is a two-wire, 4-20 mA transmitter designed for use with Type 81 100Ω platinum RTD sensors . The transmitter is available in three standard ranges, or it can be set for any range between -30° to 250°F (-34° to 121°C) with a minimum span of 40°F (22°C) .
To adjust the T81U, set the DIP switches to match the desired range and use the zero and span pots to fine tune . A high accuracy digital ohmmeter and decade box are required .
The T81U has a special 20 mA loop calibration test signal to provide easy system verification . Simply move the bottle plug jumper from NORM to 20, and the transmitter will output a constant 20 mA . The Loop Up LED provides power indication for the 4-20 mA output .
FEATURES• DIP switch rangeable• Loop calibration test signal• Snap-track mounting• Loop-powered LED indication• Conformal coated
DIMENSIONS / WIRING
100 OHM PLATINUM RTD RANGEABLE TRANSMITTERT81U SERIES
SPECIFICATIONS
T81U
RELATED PRODUCTS PAGEDCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!TEMPERATURE
1282
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
100 OHM PLATINUM RTD RANGEABLE TRANSMITTERT71U SERIES
LOOP
NO
RM
TEMPSENSOR
TEMPSENSOR
20
LOOP
1.8 (4.58)in(cm)
2.25(5.72)
Height: 1.0 (2.54)
100RTD Sensor
(sold separately)
4-20 mASignal
Power Supply10.5-45 VDC
DESCRIPTIONThe Kele T71U Platinum RTD Rangeable Transmitter is a two-wire 4-20 mA transmitter designed for use with Type 71 100Ω platinum RTD sensors . The transmitter is available in three standard ranges, or it can be set for any range between 30° to 250°F (-34° to 121°C) with a minimum span of 40°F (22°C) .
To adjust the T71U, set the DIP switches to match the desired range and use the zero and span pots to fine tune . A high accuracy digital ohmmeter and decade box are required .
The T71U has a special 20 mA loop calibration test signal to provide easy system verification . Simply move the bottle plug jumper from NORM to 20, and the transmitter will output a constant 20 mA . The Loop Up LED provides power indication for the 4-20 mA output .
FEATURES• DIP switch rangeable• Loop calibration test signal• Snap-track mounting• Loop-powered LED indication• Conformal coated
DIMENSIONS / WIRING
ORDERING INFORMATION
T71U
MODEL DESCRIPTIONT71U 4-20 mA RTD transmitter CE Certification — Commercial CE (EN50081-1 and EN50082-1) EMC Industrial CE, RF/EM hardened (EN50081-2 and EN50082-2) RANGE 2 -20° to 140°F (-29° to 60°C) 3 0° to 100°F (-18° to 38°C) 4 30° to 240°F (-1° to 116°C) XR† Special Range SENSOR TYPE — Transmitter only D ST-D71-XW duct sensor* O ST-O71 outside air sensor* W ST-W71-XW immersion sensor* with well XWM Single gang weather resistant box (mounted without sensor) NIST Calibration Certificate XN3 3 point NIST certificate for T71U and sensor combination (not available with the AV option)
T71U 2 D Example: T71U-2-D transmitter with range of -20° to 140°F (-29° to 60°C) mounted and wired in duct sensor enclosure
† Indicate at time of order* Includes sensor mounted and wired
Supply Voltage 10 .5-45 VDCSignal Output 4-20 mA, loop-poweredMaximum Output Impedance 675Ω @ 24 VDCSensor Element 100Ω platinumAccuracy 0 .1°F or 0 .2% of span TCR 0 .00385
Ω/Ω/°CRangeability Zero -30° to 210°F (-34 .4° to 98 .9°C) Minimum Span 40°F (4 .4°C) Usable Range -30° to 250°F (-34 .4° to 121 .1°C)Operating Humidity 0% to 95% non-condensingOperating Temperature 0° to 140°F (-18° to 60°C)Dimensions 1 .8"W x 2 .25"L x 1"H
(4 .6 x 5 .7 x 2 .5 cm)Approvals CEWeight 0 .16 lb (0 .07 kg) w/o optionsWarranty 18 months
SPECIFICATIONS
RELATED PRODUCTSDCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUTDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT
NEW!
1283
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supply Voltage 10 .5-45 VDCSignal Output 4-20 mA, loop-poweredMaximum Output Impedance 675Ω @ 24 VDCSensor Element 1000Ω RTDAccuracy 0 .2°F or 0 .4% of span
Rangeability Zero -30° to 210°F (-34 .4° to 98 .9°C) Minimum Span 40 °F(4 .4°C) Usable Range -30° to 250°F (-34 .4° to 121 .1°C)Operating Temperature 0° to 140°F (-18° to 60°C)Dimensions 1 .8"W x 2 .25"L x 1"H (4 .6 x 5 .7 x 2 .54 cm)Weight 0 .16 lb (0 .09 kg)Warranty 18 months
1000 OHM RTD RANGEABLE TRANSMITTERT5U, T63U SERIES
LOOP
NO
RM
TEMPSENSOR
TEMPSENSOR
20
LOOP
1.8(4.58)
in(cm)
2.25(5.72)
Height: 1.0 (2.54)
100ΩRTD Sensor
(sold separately)
4-20 mASignal
Power Supply10.5-45 VDC
DESCRIPTION
The Kele Models T5U and T63U Transmitters are field rangeable, two-wire 4-20 mA RTD transmitters designed for use with Type 5 nickel-iron sensors, the Precon Type 63 sensors, or the JCI TE6300 Series . Each one delivers reilable and accurate performance for a wide variety of applcations . This transmitter can be combined with any Type 63 Precon sensors incorporating the optional “XW” weather resistant box for a one package application solution .
To adjust the temperature transmitter, set the DIP switches to match the desired range, and use the zero and span pots to fine tune . A high accuracy digital ohmmeter and decade box are required .
FEATURES• Dip switch rangeable• Loop calibration test signal• Low cost• Snap-track mounting• Loop-powered LED indication• Conformal coated
APPLICATION• Transmitter for Invensys 1000Ω Nickel-Iron RTDs • Transmitter for Johnson Controls 1000Ω Nickel RTDs • Transmitter for Precon’s Type 63 RTDs
DIMENSIONS / WIRING
SPECIFICATIONS
T63U
ORDERING INFORMATION
T63U 2 Example: T63U-2 transmitter for 1000Ω nickel RTD with range of -20° to 140°F† Indicate at time of order
MODEL DESCRIPTION T5U 4-20 mA 1000Ω nickel-iron RTD transmitter T63U 4-20 mA 1000Ω nickel RTD transmitter RANGE 2 -20° to 140°F (-29° to 60°C) 3 0° to 100°F (-18° to 38°C) 4 30° to 240°F (-1° to 116°C) XR† Special range (see specifications for rangeability limits)
RELATED PRODUCTS PAGEDCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!TEMPERATURE
1284
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Supply Voltage 8 .5-35 VDCSignal Output 4-20 mAMaximum Output Impedance 750Ω @ 24 VDC, (Supply voltage - 8 .5) / 0 .02AAccuracy ±0 .1% of spanLinearity ±0 .1% of spanSensor Type TT801 Three-wire, 100Ω 385
platinum RTD (accepts two-wire input also)
TT807 Two-wire, 1000Ω 375 or 385 platinum RTCalibration Range Min span 35°F (19°C) Max span 1112°F (600°C) Zero Limited by the sensor used
Span Adjustments ±5% typical, factory-set, non-interacting
Zero Adjustments ±5% typical, factory-set, non-interacting
RTD Current RTD current TT801 1 mA nominal TT807 0 .2 mA nominalProtection Polarity Diode protectedOperating Temperature -40° to 185°F (-40° to 85°C)Mounting Mounts inside a handy boxWeight 0 .3 lb (0 .14 kg)Warranty 3 years
PLATINUM RTD TEMPERATURE INDUSTRIAL TRANSMITTERTT801, TT807 SERIES
DESCRIPTIONThe Minco TT801 and TT807 two-wire 4-20 mA temperature transmitters connect to platinum 100 Ω and 1000 Ω RTDs . The TT800s are custom calibrated for those tough high and low temperature application ranges . These compact transmitters are extremely rugged and have excellent performance specifications .The TT801 accepts a two-wire or three-wire 100 Ω RTD input, and the TT807 accepts a two-wire 1000 Ω input . The 4-20 mA signal is factory calibrated over the full range of the user-specified temperature span to provide excellent performance for either thin film or wire-wound platinum RTDs .
FEATURES• 4-20 mA signal transmitter• 1000/100Ω RTD input• Wide, high and low calibration ranges• Standard handy-box mounting• Two and three-wire RTD wiring optional• Factory calibrated• Functional equivalent to HCT-801 and HCT-807• 100% substitute for the discontinued Hycal
transmitters
MOUNTING
SPECIFICATIONS
-1ΩF OFFSET FOR CABLE LENGTHS BELOW WIRE GAUGE 1000Ω 100Ω (AWG) ft (m) ft (m) 12 1200 (365) 120 (36) 14 800 (244) 80 (24) 16 500 (152) 50 (15) 18 310 (94) 31 (9.4) 20 200 (60) 20 (6) 22 124 (38) 12 (3.8)
Values provided are for two-wire stranded copper and are for reference only. Terminations may also affect the offset.
Note: Three-wire transmitters have two white wires and one black wire . Connect the white wires to the two common sensor leads and black to the other lead . If the sensor has only two leads, short the two transmitter white wires together and connect to one side of the sensor . Connect the black to the other side . See Table 1 on previous page .
TT801PD1BN
NEW!
1285
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
MINCO
3.75(9.52)
3.28(8.33)
1.75(4.45)
0.7(1.78)
2.5(6.35)
1/4" dia, two places(for #8 mtg screw)
Optional Customer-Supplied Handy Boxand Cover
in(cm)
(white)
(white)
(black)
Optional Field Wiring
100ΩPlatinum RTD Sensor
TT801
(white)
(black)
1000ΩPlatinum RTD Sensor
Power Supply
(red)
(black)4-20 mA
SignalTT807
Power Supply
(red)
(black)4-20 mA
Signal
DIMENSIONS / WIRING
PLATINUM RTD TEMPERATURE INDUSTRIAL TRANSMITTERTT801, TT807 SERIES
ORDERING INFORMATION
TT801 Transmitter for three-wire PT100 RTDs (must use a PD sensor curve)TT807 Transmitter for two-wire PT1000 RTDs (must use a PW, PF sensor curve) PD 100Ω 0.00385 Ω/Ω/°C platinum curve, 6" leads PF 1000Ω 0.00385 Ω/Ω/°C platinum curve, 6" leads PW 1000Ω 0.00375 Ω/Ω/°C platinum curve, 6" leads 1 4-20 mA DC output EN Range codes per Minco letter ranges (-20°/140°F) or (-29°/60°C), former B2 code S Range codes per Minco letter ranges (0°/100°F) or (-18°/38°C) A Range codes per Minco letter ranges (20°/120°F) or (-7°/49°C) BI Range codes per Minco letter ranges (30°/130°F) or (-1°/54°C) KK Range codes per Minco letter ranges (30°/180°F) or (-1°/82°C) (not available with PF, PW models) BN Range codes per Minco letter ranges (30°/240°F) or (-1°/116°C), former B1 code N Range codes per Minco letter ranges (32°/122°F) or (0°/50°C), former B3 code H Range codes per Minco letter ranges (40°/90°F) or (4°/32°C) M Range codes per Minco letter ranges (-50°/50°C) C Range codes per Minco letter ranges (0°/100°C) BW Range codes per Minco letter ranges (0°/250°C) (not available with PF, PW models) JW Range codes per Minco letter ranges (0°/500°C) (not available with PF, PW models)
MODEL DESCRIPTION
Example: TT807PW1A PT1000 transmitter for 1000Ω, 375 curve platinum RTD, ranged for 20°/120°FTT807 PW 1 A
Note: Three-wire transmitters have two white wires and one black wire . Connect the white wires to the two common sensor leads and black to the other lead . If the sensor has only two leads, short the two transmitter white wires together and connect to one side of the sensor . Connect the black to the other side . See Table 1 on previous page .
RELATED PRODUCTS PAGEDCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!TEMPERATURE
1286
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
Supply Voltage 9 .4-35 VDCSignal Output 4-20 mA, two-wireMaximum Output Impedance 730Ω @ 24 VDC; (Supply voltage -
9 .4) / 0 .02AAccuracy Transmitter accuracy ±0 .1% of spanTransmitter linearity ±0 .1% of spanSensor accuracy ±0 .12%Rangeability Zero -50° to 212°F (-45° to 100°C) Span 30° to 320°F (17° to 180°C)Sensor Type 1000 platinum RTD, two-wire
0 .00375 Ω/Ω/°C TCR 0 .00385 Ω/Ω/°C TCR
Operating Temperature -40° to 185°F (-40° to 85°C)Enclosure Cast aluminum moisture-resistant
1/2” FNPT and gasketed cover, suitable for outdoor use, UL #459L
Averaging Sensor CopperProbe Stainless steelWiring Terminations Screw terminals; non-polar, for
connections either way; 4" (10 cm) 22 AWG leads
Weight Duct 0 .8 lb (0 .36 Kg) AVG 12' 1 .5 lb (0 .68 Kg) 24' 2 lb (0 .91 Kg) 50' 3 .6 lb (1 .63 Kg) OSA 0 .75 lb (0 .34 Kg) Immersion 0 .75 lb (0 .34 Kg) Wall 0 .75 lb (0 .34 Kg)Warranty 3 years
1000 OHM PLATINUM RTD RANGEABLE TEMPERATURE TRANSMITTERTT809 SERIES
DESCRIPTIONThe Minco TT809 is a 1000Ω Platinum RTD User-Rangeable Temperature Transmitter . Zero setting can be anywhere from -50° to 212°F (-45° to 100°C) and span from 30° to 320°F (17° to 180°C) . The TT809 comes factory calibrated, and once installed, it can be field calibrated with high precision DVM and decade box . The TT809 is easily calibrated by adjusting the zero pot to match the calibration reference .
The gasketed cast-metal housing provides excellent weather resistance . The screw terminal connections on the transmitter circuit, 1/2" NPT threaded connection, and adjustable mounting brackets simplify installation . Several varieties of precision 1000Ω platinum RTD probes are easily mated with the transmitter housing .
FEATURES• Switch-set rangeable with zero and span• One-point field calibration• Non-polar loop connections• Weatherproof sensor interface housing• Non-interacting zero/span adjustment
SPECIFICATIONS
OSA (O)
WS-6
TT-809-A Wall-Mount
(W)
Duct (E)
Immersion (P)Averaging (V)
Mated Probe Selection
NEW!
1287
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
TT809PW055P Immersion
TT809PW000W Enclosure Only
4.5 (11.43)
in(cm)
2.0 (5.08)
6.5 (16.5)
5.5 (13.97)
0.25 (0.64)
TT809PW040O Outdoor
2.88(7.30)
4.63 (11.75)
2.0(5.08)
1.5(3.81)
5.5 (13.97)
2.75(6.99)
2.0(5.08)
8.0 (20.32) (E)or
24' (7.31m)Coiled Copper (V)
0.25(0.635)
TT809PW080E Duct; TT809PW288V Averaging
4.5 (11.43) 1/2"NPT
2.0 (5.08)
Foam Gasket
1/2" FNPT
Power Connection Sensor Connection
Span and Zero Adjustments
2.75 (6.99)
The TT809 has range switch adjustments and non-interacting zero and span pots. The weatherproof box is standard and provides easy accessibility for installation and service.
Zero PotSpan Pot 1 2 3 4
1000 RTD375 Platinum
or385 Platinum
4-20 mASignal
9.4 -35VPowerSupply
TT809Temperature Transmitter
-
-
+
+
WIRINGDIMENSIONS
1000 OHM PLATINUM RTD RANGEABLE TEMPERATURE TRANSMITTERTT809 SERIES
ORDERING INFORMATION
TT809 Assembly probe for two-wire RTDs PW 1000Ω 0.0375 Ω/Ω/°C platinum curve, 6" leads LLL Length LLL in 0.1" increments 040 = 4.0", 120 = 12.0", 0.000 for “W” without sensors E Duct mount, weather-resistant box, LLL typically = 8.0" V Duct averaging, weather-resistant box, LLL must be = 144", 288", or 600" O Outside air, weather-resistant box with weather shield, LLL = 4.0" P Immersion, weather-resistant box, LLL typically = 5.5" for 6" well insertion W Wall mount, weather-resistant box, LLL typically 4.0" or 000 for no probe" 1 4-20 mA DC output BI Range codes 30°/130°F (-1°/54°C) S Range codes 0°/100°F (-18°/38°C) H Range codes 40°/90°F (4°/32°C) N Range codes 32°/122°F (0°/50°C) EN Range codes -20°/140°F (-29°/60°C) 1 No calibration data, sensor, or transmitter 2 Sensor/transmitter matched at 0°C with NIST 3 Sensor/transmitter matched at 0°, 100°, and 260°C with NIST
MODEL DESCRIPTION Sample order:
TT809PW080E1S1 Transmitter with 8" duct probe, 375 curve platinum RTD, ranged for 0°/100°F
TT809PW055P1BI2 Transmitter with 5.5" immersion probe, 375 curve RTD, with NIST at 0°C, ranged for 30°/130°F
TT809PW000W1N1 Transmitter only for two- wire 1000Ω, 375 curve RTD, ranged for 32°/122°F
RELATED PRODUCTS PAGECC-1G-K Plastic capillary and sensor holder mounting clip 1391DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994M-648-K Copper-clad capillary mounting clip 1391TCC-111 Thermal conductive compound 111 ml tub 1298WB-6 Brass well 1293WS-6 Stainless steel well 1293
NEW!TEMPERATURE
1288
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ORDERING INFORMATION
Supply Voltage 10 .5 -45 VDCSignal Output 4-20mA, loop-poweredMaximum Output Impedance mA 675Ω @ 24VDCAccuracy 0 .1°F or 0 .2% spanSensor Type 1000Ω platinum 375 curve, 1000Ω
platinum 385 curve, 100Ω platinum 385 curve
Operating Temperature 0° to 140°F (-18° to 60°C)Operating Humidity 0% to 95% non-condensingMounting Directly to wall or enclosureDimensions 2 .8” x 1 .9” x 0 .6” ( 7 .1 x 4 .8 x 1 .4 cm)Weight 0 .5 lb ( 0 .2 Kg)Warranty 18 months
DESCRIPTIONThe Kele T*PNR Series Temperature Transmitters are fixed range, two-wire 4-20mA transmitters used with Type 81, 85 and 91 series sensors . The transmitters are available in six standard ranges for temperature control and building automation .
The Kele T81PNR Series is used with the Type 81 100Ω platium RTD sensor .The Kele T815NR Series is used with the Type 85 1000Ω 385 platium RTD sensor . The Kele T91PNR Series is used with the Type 91 1000Ω 375 platium RTD sensor .
FEATURES• Low cost• Mounted on cover of handy box• Easy to install• Six preconfigured ranges• Comes with 2" x 4" handibox (already installed)• Conformal coated
WIRING
PLATINUM RTD TEMPERATURE TRANSMITTERT81PNR, T85PNR, T90PNR SERIES
SPECIFICATIONS
Power Supply10.5-45 VDC
LOOP
LOOP
TEMP
TEMPSENSOR
SENSORRTD SENSOR
(sold separately)
4-20 MASignal
Loop PowerLED
T90PNR 3 Example: T90PNR-3 transmitter for 1000Ω platinum RTD with a 4-20mA output for 0° to 100°F(-18° to 38°C)
MODEL DESCRIPTION T81PNR Transmitter for type 81 100Ω 385 platinum RTD T85PNR Transmitter for type 85 1000Ω 385 platinum RTD T90PNR Transmitter for type 91 1000Ω 375 platinum RTD RANGE 2 -20° to 140°F (-29° to 60°C) 3 0° to 100°F (-18° to 38°C) 4 30° to 240°F (-1° to 116°C) 12 -22° to 113°F (-30° to 45°C) 13 32° to 212°F (0° to 100°C) 14 32° to 122°F (0° to 50°C)
T81PNR
RELATED PRODUCTS PAGE DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994 DCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995
NEW!
1289
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
Supply Voltage 24 VAC ±15% (50/60 Hz), 0 .3 VASignal Output 1-5 VDC, 32° to 122°F (0° to 50°C)Accuracy ±3 .6°F (2°C)Sensor Coverage Adjustable (344 degrees
horizontal/65 degrees vertical)Sensing Distance Unlimited (without obstructions)View Angle 52 degrees, distance to sensing = 1:1Response Time 10 secEmissivity 0 .95Operating Humidity 10% to 90% RH non-condensingOperating Temperature 59° to 95°F (15° to 35°C)Enclosure Rating Fire-resistant plastic (white)Weight 0 .6 lb (0 .27 kg)Warranty 1 year
INFRARED ROOM TEMPERATURE TRANSMITTERTY7321A1009
DESCRIPTIONThe Yamatake Model TY7321 is a non-contact infrared room radiant-temperature transmitter . Infrared energy is one of the main components of the perceived temperature in a space . The Model TY7321 has a wide 52° fixed viewing angle which averages the heat energy of the office environment and offers a 1-5 VDC signal for temperature . It mounts conveniently to any ceiling or wall via back box or direct to ceiling tiles or plaster . The lens coverage is adjustable and points horizontally up to 344° and vertically up to 65° .
FEATURES• Non-contact with 52° view angle• 1 to 5 VDC signal, 32° to 122°F (0° to 50°C)• Ten-second response • 344° swivel coverage• Ceiling or wall mount• Attractive white base and cover
The TY7321A1009 is used when mounting a physical sensor is not possible in room applications . The thermopile senses the background heat radiation over an open-air environment and averages the energy into a 1-5V temperature signal . It is ideal in open office environments when the cubical walls prevent sensor mounting . Museums or marble entrance halls are also useful ceiling applications . When directed at a sun-drenched outdoor window, the unit measures the effects from the sun so that the supply air can be increased to compensate for thermal loading .
SPECIFICATIONS
+
+– 24 VAC
1-5 VDC
Signal
Terminate to Base
2
3
1
1
3
2
4
6
5
4
WIRING
TY7321A1009
APPLICATION
NEW!TEMPERATURE
1290
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
5.5 (13.97)
Base Mounting Screw
Terminal Cover
Boxless Type Box Type
Washer
Spring Mounting Bracket
in(cm)
3.4 (8.64)
2.2 (5.59)
2.9(7.37)
0.35(0.90)
9.0 (2.39)
Sensing Window
Mounting Baseto Back Box
1.8 (4.57)
2.6 (6.60)
3.5 (8.89)
SpringMounting Bracket
BaseMounting Screw
Square Hole
WiringTerminal Cover
Sensor
MountingBase
Align the small slot on the sensor with the triangle on the mounting base. Turn the sensor until it clicks.
2.25 (5.72)
Turn the base mounting screw two or three times to attach loosely.
Push the mounting base into hole. Turn the base mounting screw until spring brackets are firmly engaged above ceiling.
MountingBase
Base Assembly Base Installation Sensor Installation
MOUNTING
DIMENSIONS
INFRARED ROOM TEMPERATURE TRANSMITTERTY7321A1009
ORDERING INFORMATION
MODEL DESCRIPTIONTY7321A1009 Infrared room temperature transmitter, ceiling mount
65°Adjustable
Vertical
344°AdjustableHorizontal
52° Fixed OpticsD:S = 1:1
MOUNTING
RELATED PRODUCTS 691-K0A Control transformer, 120:24 VAC, 40 VA, Class 2
NEW!
1291
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
4
12
3
1: V+2: Switched Output NO3: V-4: Switched Output NO
2: 4:
1
4
2
3
V+
V-
TK7330
Switched Output NO
Switched Output NOWhite
Brown
Black
Blue
4
12
3
1: V+2: Switched Output NC3: V-4: Switched Output NO
2: 4:
1
4
2
3
V+
V-
TK6330
Switched Output NO
Switched Output NC
Supply Voltage 9 .6 to 32 VDC, 530 mAMedia Temperature Range -13° to 284°F (-25° to 140°C)Setpoint Range TK6330 3° to 284°F (-16° to 140°C) TK7330 -4° to 284°F (-20° to 140°C)Reset TK6330 Adjustable: -4° to 277°F (-20° to 136°C) TK7330 Fixed: 9°F (5°C)Contact Rating 0 .5A DC PNP (sourcing)Contact Type TK6330 1 NO, 1 NC, open collector transistor TK7330 2 NO, open collector transistorAccuracy ±5 .4°F (3 .0°C)Repeatability ±0 .18°F (0 .1°C)Wetted Parts Stainless 316L/1 .4404
Visual Indication Power Green LED Switching status Yellow LED (Energized = Switched)
Shock 50g (11ms)Vibration Resistance 20g (10 to 2000 Hz)Operating Temperature -13° to 158°F (-25° to 70°C)Enclosure IP67; Material: PBT (Pocan); PC
(Makrolon); FPM (Viton); stainless steel 316L
Process Connection ¼" NPTWiring Terminations 4 pin M12 Electrical connector (order separately)Dimensions 1 .06" diameter x 4 .15"H (2 .7 x 10 .5 cm)Approvals UL File E179189, CEWeight 0 .25 lb (0 .11 Kg)Warranty 2 years
TEMPERATURE SWITCHTK SERIES
DESCRIPTIONThe IFM Efector TK Series Temperature Switch is a versatile temperature switch that is configured for set point and reset through two radial setting rings . These temperature switches are ideal for maximum and minimum temperature indication applications . The switch points can be set up out of the box without being installed and applied to the system . Once set, they can be locked by a third rotating ring . The TK Series is available with either set point and reset adjustment or two set points and a fixed reset . Each TK Series Temperature Switch should be ordered with a separate cable assembly available in 6' (1 .8 m), 15' (4 .6 m), 30 ft (9 .1 m) lengths .
FEATURES
• Two, easy to use dual setup dials• Solid state electronics• Two PNP switching outputs• No software needed• Local LEDs for power and switching status
WIRING - TK7330
SPECIFICATIONS
WIRING - TK6330
TK6330
NEW!TEMPERATURE
1292
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
1.06 (2.7)
1.06 (2.7)
M12x1
1/4 -18 NPT
1.38
(3.
5)
1.89
(4.
8)
3.78
(9.
6)
4.15
(10
.6)
in (cm)
0.32 (0.82)
ORDERING INFORMATION
MODEL DESCRIPTIONTK6330 TK Series temperature switch, adjustable reset, 3° to 284°F (-16° to 140°C), 1 NO 1 NC contactsTK7330 TK Series temperature switch, fixed reset, 9°F (5°C) -4° to 284°F (-20° to 140°C), 2 NO contacts
*Connector required, see below
DIMENSIONS
TEMPERATURE SWITCHTK SERIES
1: Locking ring2: Setting rings (manually adustable after unlocking)3: LED green: supply voltage O.K.4: Setting marks5: LED yellow: value [SET] reached, OUT1 = ON / OUT2 = OFF6: Process connection 1/4'' NPT pin 4 = OUT1 / pin 2 = OUT2• Minimum distance between [SET] and [RESET] = 5.4°F (TK6330)• To obtain the setting accuracy: Set both rings to the minimum value, then set the requested values.
1
1
2
3
4
5
6
SET
RESET
TK6330 TK7330
1
1
2
3
4
5
6
SWITCH 1
SWITCH 2
RELATED PRODUCTS PAGEDCP-1.5-W Power supply, 24 VAC IN to 24 VDC OUT 995DCPA-1.2 Power supply, 120 VAC IN to 24 VAC/24 VDC OUT 994E30094 VK/TK Series protective cover EVC001 6' (1.8 m) foot straight connector EVC002 15' (4.6 m) straight connector EVC003 30' (9.1 m) straight connector EVC004 6' (1.8 m) right-angled connector EVC005 15' (4.6 m) right-angled connector EVC006 30' (9.1 m) right-angled connector EVC007 6' (1.8 m) right angled connector with LED indication EVC008 15' (4.6 m) right angled connector with LED indication EVC009 30' (9.1 m) right angled connector with LED indication
NEW!
1293
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ORDERING INFORMATION
DESCRIPTIONMODEL
WB
WBF
WS
WSF
FB-3
FS-3
2.5" element length
4.0" element length
6.0" element length
9.0" element length
Specify custom length (12", 15", 18", or 24")
2.5 (6.35)
4 (10.16)
6 (15.24)
9 (22.86)
12-24
2 (5.08)
3.5 (8.89)
5.5 (13.97)
8.5 (20.40)
XX - 0.5 = Probe length
2.5
4
6
9
XX
LENGTH DESIGNATION (well only)in (cm) in (cm)
PreconXL-probe length
Mincoprobe length
Example: WBF-9 brass well with 9" element length and FB-3 adapterWBF – 9
Brass well
Brass well with FB-3 1/2" to 1/8" well adapter
304 stainless steel well
304 stainless steel well with FS-3 1/2" to 1/8" well adapter
1/2" to 1/8" brass well adapter for use with Precon and T102 sensors
1/2" to 1/8" stainless steel well adapter for use with Precon and T102 sensors
0.5(1.27)
1.13(2.86)
0.26(0.66)
0.5(1.27)
1.75*(4.44)
0.88(2.22)
External Dimensions
Internal DimensionsA
B
C
D
C
DAB
1/2" NPT1/8" NPSM
1/2" NPT
FB-3FS-3
0.75(1.91)
in(cm)
NOTE: Inside threads are 1/2" NPSM; outside threads are 1/2" NPT.
*For WB-2.5 and WS-2.5 the head dimension is 1.5" long
DIMENSIONS
SENSOR THERMOWELLS AND WELL ADAPTERSWB, WS
FS-3
MODEL ELEMENT INSERTION SHANK DIA OVERALL LENGTH A LENGTH B LENGTH C LENGTH D
WB-2.5 2.5 (6.35) 1.4 (3.56) N/A 2.75 (6.99) WS-2.5 2.5 (6.35) 1.4 (3.56) N/A 2.75 (6.99) WB-4 4.0 (10.16) 2.5 (6.35) N/A 4.3 (10.92) WS-4 4.0 (10.16) 2.5 (6.35) N/A 4.3 (10.92) WB-6 6.0 (15.24) 4.5 (11.43) 0.625 (1.59) 6.3 (16.00) WS-6 6.0 (15.24) 4.5 (11.43) 0.625 (1.59) 6.3 (16.00) WB-9 9.0 (22.86) 7.5 (19.05) 0.625 (1.59) 9.3 (23.62) WS-9 9.0 (22.86) 7.5 (19.05) 0.625 (1.59) 9.3 (23.62) FB-3 0.44 (1.12) 0.31 (0.79) 0.5 (1.27) 0.75 (1.91)
TCC-111
TCC-12FB-3 Adapter
WS-4 WB-6
DESCRIPTIONWB and WS Bulb Wells are used with standard or custom length PreCon immersion thermistors and Type 63, 71, 81, 85 and 91 RTD sensors by using the FB-3 (brass) or FS-3 (stainless steel) adapter . These wells are also used directly with Minco immersion sensors and are designed to be installed into a standard 1/2" saddle or Thredolet® .
WB Brass Wells are compatible with noncorrosive liquids . They will withstand a maximum temperature of 400°F (204°C) at a static pressure of 1000 psi (6 .9MPa) .
WS 304 Stainless Steel Wells are compatible with corrosive or noncorrosive liquids . These will withstand a maximum temperature of 1000°F (538°C) at a static pressure of 4500 psi (31 MPa) .
WARRANTY 1 year
RELATED PRODUCTS PAGETCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298
NEW!TEMPERATURE
1294
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
SENSOR THERMOWELLS AND WELL ADAPTERSF2B-D, F2N-B, F2S-D, WEL-B, WEL-S
1/8-27 NPSM Internal Thread1/2" NPT
3.25(8.26)
0.5 (1.27)
5.13(13.03)
4.94(12.54)
WEL-B Brass Well or WEL-S Stainless Steel Well
1/2" NPSM Female Thread0.69
(1.75)0.63
(1.58)
1/8" NPSMMale Fitting
F2B-D BrassF2S-D Stainless Steel
F2N-D Nylon
1.31(3.33)
1/2" NPSM Female Thread
(insertion length add 0.31" (0.97))
Well Adapters
1/8" NPSMMale Fitting
in(cm)
DESCRIPTIONWEL-B and WEL-S Sensor Wells are used with standard length Kele and Precon branded immersion thermistor and RTD sensors . These wells may be used with 5" (12 .7 cm) Minco immersion sensors by using the "H" option adapter . The well is designed to be installed into a standard 1/2" saddle or Thredolet®
The WEL-B Brass Thermowell is the standard thermowell for inserting into noncorrosive liquid lines . It will withstand a maximum temperature of 400°F (204°C) and a maximum static pressure of 1000 psig (6 .9 MPa) .The WEL-S 304 Stainless Steel Thermowell is inserted into corrosive liquid pipe lines . It will withstand a maximum temperature of 1000°F (538°C) and a maximum static pressure of 4500 psig (31 MPa) .
The F2S-D Stainless Steel, F2N-D Nylon, or the F2B-D Brass Well Adapter allows a 1/4" (0 .64 cm) diameter sensor probe with a 1/2" NTSM fitting to be used with a standard WEL-B or WEL-S Thermowell .
WARRANTY 1 year
DIMENSIONS
ORDERING INFORMATION
MODEL DESCRIPTIONWEL Bulb wells B Brass bulb well S 304 Stainless steel bulb well OPTIONAL ADAPTER F2B-D* brass adapter for use with WEL-B F2S-D* stainless steel adapter for use with WEL-S
H
Example: WEL-B brass bulb well with F2B-D brass adapter
* For use with Minco sensor probe length LLL=5.5"
WEL B H
F2N-D
TCC-111
TCC-12F2B-D
F2S-D
WEL-B
WEL-S
RELATED PRODUCTS PAGEF2B-D Brass adapter 1/2” NPT to 1/8” NPS adapter F2N-D Nylon adapter 1/8” NPSM x 1/2” NPSM F2S-D Stainless steel adapter 1/8” NPS x 1/2” NPSM TCC-111 Thermal conductive compound 111 ml tub 1298TCC-12 Thermal conductive compound tube, 12 ml 1298
NEW!
1295
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
XA
OPTIONSSENSOR OPTIONS
4.625(11.75)
4.0(10.2)
2.0(5.08)
in(cm)
1/2"NPT
1/2" NPT XCO
XH
4"
1.882.13
2.95(7.5)
2.95(7.5)
1.65(4.2)
in(cm)
XHP
SETPOINT OPTION FOR FLUSH SENSOR (ST-S*)Two-wire with resistance from 0Ω to 10,000Ω (0Ω to 1500Ω optional XA1500), flush enclosure with pigtails for the connection
GREENFIELD FITTING (factory installed) Option available with ST-D sensor
SETPOINT OPTION FOR EXECUTIVE SENSOR (ST-S*E)Two-wire with resistance from 10,000Ω to 30,000Ω, (1000Ω to 3000Ω, opt . XA10K),(1000Ω to 1400Ω, opt . XA2K)
HANDY-BOX HOUSING (factory installed) Equipped with eleven 1/2" knockouts, option available with ST-A, ST-D, and ST-W sensors
SETPOINT OPTION FOR SPACE SENSOR (ST-S*P) Two-wire with resistance from 0Ω to 10,000Ω (0Ω to 1500Ω optional XA1500), space enclosure with pigtails for the connection
PLASTIC EUROPEAN-TYPE HANDY BOX Complete with four 3/4" cutouts, two open cable cutouts and snap-on cover, option available on all ST-A, ST-W, and ST-D sensors
1/2" STANDARD SERVICE CONDUIT (LB) FITTING Available for the ST-A all-purpose and ST-W immersion sensors
1/2" SEALTITE STRAIGHT FITTING Used for liquid-tight connection, available for the ST-W immersion sensors
XGXA
XA
XLT
NEW!TEMPERATURE
1296
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
XTA
Red IndicatorLamp
OPTIONSSENSOR OPTIONS
1.0(2.5)
0.25(0.63)
in(cm)
1.75(4.44)
5.0(12.70)
(red)
5.0(12.70)
0.5(1.27)+ – (black)
Adjust Pot(18-22 mA)
in(cm)
XME
XK
Executive
Space
XME
XPL
XS
XTA/XTAC
CLM-20
CUSTOM LOGO Any logo or wording added to the space or executive enclosure, minimum order and customer artwork required
SECURITY SCREWS For use with ST-S* sensors, see SD-6 spanner screwdriver
MOMENTARY PUSH BUTTON Wired N .O . with pigtails, N .C . available upon request for flush and executive enclosures
ANALOG BIMETAL THERMOMETER Measures 50° to 90°F for ST-S*E sensors XTA Measures 13° to 29°C for ST-S*E sensors XTAC
MOMENTARY MEMBRANE PUSH BUTTON Wired N .O . with pigtails or to terminals when used with options requiring circuit cards, available with executive room enclosures only
DIGITAL THERMOMETER OPTION 3-1/2 digit display readout from 15° to 32°C with one-year battery, 3/8" high, display updates every 10 seconds
RED LED INDICATOR LAMP Powered externally with 24 VAC/VDC and connected via a terminal block
DecoratorXM
CLM-20Limits the output of any 4-20 mA transmitter to a factory set 20 mA, wired in series, and adds 125Ω of effective load to the transmitter
NEW!
1297
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ACCESSORIES FOR TEMPERATURE PRODUCTSTEMPERATURE SENSOR ACCESSORIES
Adjustable for2" to 8" pipe(5-20 cm)
4.25(10.80)
in(cm)
in(cm)
4.25(8.25)
2.5(6.35)
2.75(6.99)
4.25(10.80)
in(cm)
5.25"
7"
Rear View (not actual size)
A
A
B
BB
C C
C
DD
4½'' 13/16''
1¾''3¼''2
¼''
3¼''
29⁄ 3
2''
2.25(5.72)
in(cm) 1.0
(2.54)2.65
(6.73)0.37
(0.95)
Exposed InsertTM
APB-28
BKT-1
BKT-2
KT-1
10-531
SSPL-2 ISPL-1
ADJUSTABLE PIPE BRACKETMODEL APB-28
The APB-28 is used with Model ST-R*SC, STR* S, KTM*SC, KTM*S sensors . The bracket can be used on pipe sizes from 2" to 8" (5 .08 to 20 .32 cm) outside diameter . Precon TCC-12 thermal conducting compound should be used with the bracket to improve heat transfer between the pipe and the temperature sensor . Insulate approximately 2' (61m) on each side of the probe for best results .
ADAPTER BRACKETMODEL BKT-1
The BKT-1 can be used with Models WMB-1 or ST-S*P to mount directly on a standard electrical box . Mounting screws are provided .
DRYWALL ADAPTER BRACKETMODEL BKT-2
The BKT-2 is used to mount wall sensors directly to drywall quickly and securely . Simply cut a hole and bend the ears over the back of the drywall . Then, secure with supplied drywall screws
ADAPTER PLATEMODEL ISPL-1, SSPL-1
The ISPL-1 ivory model and the SSPL-1 stainless steel model are standard light switch plates that can be used with the BKT-1 as attractive mounting plates for installing a Model WMB-1 or ST-S*P on a standard electrical box . Mounting screws are provided .
SENSOR ADAPTER PLATEMODEL 10-531
The 10-531 plate is ideal for cover mounting holes from old sensors . For the KTR*, ST-S*EW, ST-T90EW, ST-T91K .
SENSOR COVER REMOVER TOOL 1/16"MODEL KT-1
The KT-1 tool fits Kele and most TAC, Johnson Controls, and Siemens covers . The tool has a 1/16" hex top and a reversible blade (flat and Philips) .
NEW!TEMPERATURE
1298
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
ACCESSORIES FOR TEMPERATURE PRODUCTSTEMPERATURE SENSOR ACCESSORIES
1.63(4.13)
2.63(6.67)
in(cm) Shown with
custom logo
1.38(3.49)
1.75(4.45)
in(cm) Shown with
custom logo
0.31(0.8)
0.63 (1.59)
in(cm)
XS Option Screw Head
3.88(9.84)
in(cm)
PN-10
PN-26
PN-46
SD-6
TCC-12
TCC-111
BRUSHED ALUMINUM FACEPLATEMODEL PN-10
The PN-10 is a blank Brushed Aluminum Faceplate for use with the WMB-1 enclosure . Customized logos are available .
DECORATIVE FACEPLATEMODELS PN-26, PN-32
The gray PN-26 or tan PN-32 Decorative Faceplates are available for use with the WMB-2 enclosure . Customized logos are available .
RAW SENSOR CLIPMODEL PN-46
The PN-46 is used where an aluminum clip is desired to mount a raw sensor into an existing enclosure . The PN- 46 includes adhesive backing for easy installation .
SPANNER DRIVERMODEL SD-6
The SD-6 Spanner Driver is used to install the security screws (XS option) for the ST-S* sensor .
THERMAL CONDUCTING COMPOUNDMODEL TCC-12
The TCC-12 Thermal Conducting Compound is a metal oxide-filled, dielectric, silicone-based compound that facilitates heat transfer by filling voids and gaps between mating surfaces . The operating temperature range is -65° to 400°F (-54° to 204°C) . The compound is packaged in convenient, single-application, 0 .13 fl oz (12 gram) tubes .
THERMAL CONDUCTING COMPOUNDMODEL TCC-111
The TCC-111 Thermal Conducting Compound consists of an aluminum powder in a barium grease-based compound . It facilitates heat transfer by filling voids and gaps between mating surfaces . The operating temperature limit is 300°F (148°C) . The compound is packaged in a convenient 3 .75 fl oz (111 mL) tub .
NEW!
1299
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
ACCESSORIES FOR TEMPERATURE PRODUCTSTEMPERATURE SENSOR ACCESSORIES
0.31(0.79) 1/2 EMT
Conduit Nut
4.25(10.8)
4.31(10.95)
5.86(14.88)
7.13(18.11)
1.75(4.45)
3.75 (9.53)
ProbeInsert
WMB-1 WMB-2
ES-1051
13F142 TR10K
SOLAR COMPENSATORMODEL M-2500
The Model M-2500 Solar Compensator is a non-directional device used to compensate for the solar effects on buildings . Mount outside in sunlight to measure the solar gain experienced by the building envelope . Any 1/4" probe may be inserted into the solar chamber . This device is ideal for tuning perimeter hot water reset to each building's requirements .
PRECISION RESISTORSMODEL 250R-3-1, 13F142, ZGR01, TR10K
The 250R-3-1 is a 250Ω 3-watt 1% resistor used to convert a 4-20 mA signal to a 1-5 volt signal and is perfect for use in areas with limited access .
The 13F142 is a 250Ω, 3-watt, 1% resistor packaged with instructions to convert a 4-20 mA signal to a 1-5V signal .
The ZGR01 is a 500Ω, 1/2-watt, 1 .2% resistor used to convert a 4-20mA signal to a 2-10V signal .
The TR10K is a 10,000Ω, 1/4-watt, 0 .1% resistor with alligator clips for static testing of Type 3 or 24 thermistors at 77°F .WALL SENSOR ENCLOSURE
MODEL WMB
The WMB is a vented, plastic wall enclosure . A raw sensor can be snapped directly in contact with the aluminum faceplate . The WMB can be mounted directly to sheet rock block walls using the screws provided .
NON-CFC FREEZE SPRAY
MODEL ES-1051
The ES-1051 is ideal for quick point-to-point sensor wiring verification and freezestat operability . Freeze each sensor in order, check the trend printout, and rework the terminations as needed . Each unit contains 8 fl oz (235 mL) .
M-2500
WMB-3 WMB-4
in(cm)
NEW!TEMPERATURE
1300
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
3.81(9.7)
3.125(7.9)
Standardpaddle switch
Standardtoggle switch
Two-digit, 0.5" LCD display
1.31 (3.3)
2.4(6.1)
5.44(13.8)
75°F
DESCRIPTIONEXTERNAL COMMUNICATIONS JACK MODEL XJ1For use with handheld terminals, requires adapter cable CCRJ11AD
MODEL DESCRIPTION12201 Single gang ivory toggle, °F/°C and % RH
11101 Single gang white rocker, °F/°C and % RH
12100 Single gang white toggle, °F/°C
12200 Single gang ivory toggle, °F/°C
11100 Single gang white paddle, °F/°C
12101 Single gang white toggle, °F/°C and % RH
INTERNAL COMMUNICATIONS JACKModel XJ2 For use with handheld terminals
CABLE ACCESSORY FOR XJ1 MODEL CC-RJ11ADThe CC-RJ11AD is used to interface to the XJ1 option on the ST-S*E sensor . The CC-RJ11AD is 6" (15 .24 cm) long with an 8-pin (four pins used) connector for the XJ1 side and a female RJ11 connector on the other .
P
OUT
INPOT
COMPSENS
SENSOR
EXTSENS
S
Customer-SuppliedHandheldTerminal
Customer-Supplied TelephoneExtension
XJ1External
Jack
XJ2Internal Jack
CC-RJ11AD
6
24
53
87FemaleRJ11
Mounted underboard
6 - RT2 5 - OUT +4 - OUT –3 - IN–2 - IN+
not used
Adapter Pinout, CC-RJ11AD
plug
48263
P
OUT
INPOT
COMPSENS
SENSOR
XJ2 InternalRJ11 Jack
XJ2 (under cover)
EXTSENS
S
123456
Top DownPin Numbers
P
OUT
INPOT
COMPSENS
SENSOR
XJ1 External Jack(see pinout below)
EXTSENS
S
XJ1
1 2 3 4X 6 7 8
Top ViewPin Numbers
11101 12100
ROOM TEMPERATURE DISPLAYPLATE PAL SERIES
APPLICATIONThe Plate Pal is used for retrofit of wall mounted lighting plates when a temperature or humidity display is needed . It fits over a standard toggal or paddle plate and mounts to a standard US handy box without adapters . The switch is still used to control the appliance under power .
PLATE PAL ROOM TEMPERATURE INDICATOR 11000, 12000 SERIESThe Plate Pal is a room temperature indicator, built into a switch plate, for either °F or °C and % RH . GPA 76 or LR44 battery included . Colors are available in white or ivory .
Inter-SensorCommunications
XJ1 Pinout XJ2 Pinout 8-Pin Connector Termination RJ11 Connector 4 . . . . . . . . . . . . . . . . . OUT + . . . . . . . . . . . . . . . . . . 2 1 . . . . . . . . . . . . . . . . . OUT – . . . . . . . . . . . . . . . . . . 3 3 . . . . . . . . . . . . . . . . . . IN – . . . . . . . . . . . . . . . . . . . 4 6 . . . . . . . . . . . . . . . . . . IN + . . . . . . . . . . . . . . . . . . . 5
in(cm)
NEW!
1301
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
SENSOR LOCATION SCREENING/FEWER CALLBACKS
At some point in each building automation professional’s career, there comes a rite of passage . It’s when the boss hands off a set of floor plans with no space sensor locations marked, and orders him to get the job done . In some cases, the boss (or one of the old-timers) takes a few minutes to explain the rationale for sensor placement, the pitfalls to be avoided, and the subtle variations that have proven to reduce or eliminate complaints and callbacks over the years . Some companies even require formal training anda competency trial before conferring the coveted title of Sensor Spotter . Far too often, however, the get-it-done command comes in an e-mail message from BOB (Boss On Beach), and there is no opportunity for discussion . We sincerely hope that all of our customers who have been tossed into the deep end for such a swimming lesson know that they can call Kele (or pop over to www .kele .com) and tap into hundreds of man-years of engineering experience . We’re here to make it easy for you – it’s what we do . For example, here are some of the obvious and not-so obvious factors to consider when spotting and installing wall-mount temperature or humidity sensors:
1) The most obvious factor of all is making sure the sensor location is in the space served by the air handler (or other terminal unit) with which it is associated . If the ceiling is in place, it’s best to at least have a chat with the folks who installed the sheet metal – make sure nobody decided to do some re-zoning without informing you . This has bitten more than just a few of us over the years (your humble author included) .
2) Avoid locations in which the sun will shine on the sensor . In fact, it’s better to stay at least several feet away from any portion of wall that gets direct sunlight . Surface temperatures of sunlit walls can be as much as 20°F (11°C) higher than room air, and this heat can be conducted to a nearby sensor .
3) Avoid outside walls, unless the only other choice involves direct sunshine .
4) Avoid other sources of heat within the space . If not yet occupied, ask where electrical equipment will be placed . A temperature sensor on a wall above a copy machine can make a room mighty cold . If sensing humidity, an elevated temperature at the sensor location will cause it to report lower values than a sensor at actual room temperature .
5) Avoid the supply air stream . Note that this is not always as simple as it sounds . For those who haven’t been exposed to it before, the Coanda effect can cause grief . Coanda described the tendency of fluid streams above a certain velocity to cling to a surface . It’s particularly significant with linear slot diffusers, but it happens with all diffusers to a degree . The point is that even if the room supply air diffuser is a good distance away from the wall, its output may travel across the ceiling and down the wall, causing false readings at the sensor . It’s best to line up with the corners of diffusers if they can’t be avoided altogether . We’ve seen cases in which shelves had to be built to shield a wall sensor from direct blasts of supply air .
6) Avoid leaks . Even in interior rooms, the air from the space within the wall can be warmer or cooler than the conditioned area . In some cases, the moisture content can be very different, too . Seal the holes, including the hole for the sensor cable .
7) Finally, insulate from the wall if needed . If the best choice for a sensor location is on an exterior wall, remember that the wall itself will heat up and cool down according to outdoor conditions . Also, when night setback is practiced, wall surface temperatures take many more hours to return to equilibrium on morning startup than the room air temperature does . An insulating pad such as the BA-FOAMBACK is a good solution, though we’ve seen cases in which standoffs were needed in order to totally eliminate the effects of a hot or cold wall . If followed, the tips outlined here will help keep the really troublesome locations out of the picture when spotting sensors . These tips are not the end-all, though . There will always be rooms in which sensor location is debatable, and those debates will always be fun to have . In fact, we hope you’ll call or e-mail our Kele Technical Sales staff when they arise . We’d love to be included!
SENSOR TYPE TEMPERATURE SENSOR DESCRIPTION TYPICAL SENSOR USER 3 10,000Ω thermistor @ 77°F, Type III material AET, American Automatrix, Andover, Carrier, Delta, Invensys, Teletrol, York 21 2252Ω thermistor @77°F, Type II material Anderson Cornelius, JCI (A319) 22 3000Ω thermistor @77°F, Type II material Alerton, ASI, ATS, Snyder General 24 10,000Ω thermistor @77°F, Type II material Alerton, Automated Logic, TAC (INET), Triangle Microsystems, Trane 27 100,000Ω thermistor @77°F, Type II material Siemens (Landis and Staefa) 42 20,000Ω thermistor @77°F, Type IV material Honeywell (XL) 51 1800Ω thermistor @77°F, Type V material TAC (VISTA) 81 100Ω platinum RTD @ 32°F, 385 curve Transmitter available for any user 85 1000Ω platinum RTD @ 32°F, 385 curve JCI, Siemens, Trane (transmitter available for any user) 91 1000Ω platinum RTD @ 32°F, 375 curve JCI, Siemens (transmitter available for any user) 5 1000Ω Balco RTD @ 70°F TAC (Siebe) (transmitter available for any user)
NEW!TEMPERATURE
1302
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
PRECON THERMISTOR QUALITY
History In 1945, Bell Labs refined the process of making stable and reproducible thermistors . The telephone company then started to use this technology in large quantities . Precon, now Kele Precision Manufacturing (KPM), started producing thermistors in 1967 and has satisfied customers for over 36 years . Like Bell Labs, KPM controlled the complete manufacturing process in order to manufacture a superior product . Other manufacturers purchase prefabricated glass bead thermistors, which are usually procured from the lowest bidder .
Manufacturing ProcessPrecon brand sensors start with the highest quality chemical ingredients, using only the best raw materials to ensure precision and stability . The mixture is pre-aged to render the precise thermistor curve required, guaranteeing repeatability and long term stability, specified at 0 .24°F for five years . The leads are then attached, and the sensor is trimmed and chemically cleaned . This step ensures interchangeability of ±0 .36°F and eliminates impurities for long life . At this point, each sensor is tested before encapsulation . This produces a 100% product yield . The Precon sensor’s exclusive encapsulation, in a heat-conductive housing, makes the sensor complete . It protects the sensor from moisture and physical damage and provides a heat dissipation constant of 1 .5 mW/°F . Each sensor is then inserted into the appropriate mounting hardware for the HVAC application . This includes wall, duct, immersion, OSA, pipe, freezer, concealed, or custom housing . Each mounting design was specifically developed to make mounting easy and durable for HVAC use .
ComparisonsManufacturing quality is obvious when comparing a Precon sensor side by side with a typical HVAC counterpart . It is easy to pick out the sensor that lasts! Heat dissipation is critical to good temperature measurement . As seen in the graph below, Precon sensors dissipate heat at three times the rate of glass bead-type sensors, so be sure to ask if the thermistor you buy is based on a glass bare bead sensor .
The most common BAS thermistor voltage is 2-3 VDC . At the 2V level, the Precon sensor is within 0 .3°F of its zero-power point, while the competition is within 0 .75° to 1 .5°F . Since power (heat) is proportional to the applied voltage squared, the error value grows rapidly as monitoring voltage increases . When this error is added to the basic accuracy of the thermistor, errors begin to accumulate and become unacceptably large . Large errors cause energy waste and significant comfort problems if not corrected . Precon sensors take the risk out of temperature sensing by reducing the errors added by the BAS .
BenefitsAll Precon sensors are equipped with a lifetime warranty . The process above is the best in the world and KPM backs it up .
Mean time between sensor failure is over 117 years . This number is even more amazing considering it includes all failures of any kind, including customer damage or misapplication . The fact is, Precon thermistors grow more stable with time .
The biggest benefit is to your customer – no warranty call backs . Long sensor life is typically far beyond the building life . Each warranty call back due to sensor failure costs not only a minimum of one hour of down time for your service technician but also incalculable damage to your reputation and perceived competence with your customer .
Precon sensors are the most cost-effective when looking at the big picture of installation – system performance, no call backs, and company reputation . Sensors are often the smallest cost on any project . Why short change your customer? Use a Precon sensor .
9.00
8.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.001.00 2.00 3.00 4.00 5.00
10K Thermistor Error Due to Self-Heating Effect @ 75°F
Applied Voltage From BAS Input
Brand YSelf-HeatingError @0.28 mW/°F
Err
or
In °
F
PreConSelf-HeatingError @ 1.50 mW/°F
Brand X Self-HeatingError @0.56 mW/°F
PRECONEncapsulated
Bare BeadCompetition
NEW!
1303
TEMPERATURETEM
PERATURE
20
WE MAKE IT EASY. kele.com 888-397-5353 USAMarch 2014
SENSOR RESISTANCE CHART – RTD SENSORS
RTD SENSOR RESISTANCEFAHRENHEIT CENTIGRADE
Element Code Base
Resis-tance
Type 78 2000Ω Nickel Iron
@ 70°F
Type 71/81 100Ω
Platinum @ 32°F
Type 85 1000Ω
Platinum @ 32°F
Type 91 1000Ω
Platinum @ 32°F
Type 63 1000Ω Nickel @ 32°F
Type 5 1000Ω Nickel Iron
@ 32°F
Element Code BaseResistance
@ 21°C
Type 78 2000Ω Nickel Iron
@ 0°C
Type 71/81 100Ω
Platinum @ 0°C
Type 85 1000Ω
Platinum @ 0°C
Type 91 1000Ω
Platinum @ 0°C
Type 63 1000Ω Nickel
@ 0°C
Type 5 1000Ω Nickel Iron
@ 0°C
TCR 0.00527 0.00385 0.00385 0.00375 TCR 0.00527 0.00385 0.00385 0.00375
°F Ohms Ohms Ohms Ohms Ohms °C Ohms Ohms Ohms Ohms Ohms
-40 84.26 842.59 846.58 699.00 779.00 -40 84.26 842.59 846.58 699.00 779.00
-30 1543.24 86.46 864.57 868.01 724.72 797.50 -30 88.21 882.13 885.13 745.30 875.26
-20 1585.02 88.65 886.51 889.41 753.22 894.70 -20 1653.81 92.16 921.60 923.55 792.80 799.82
-10 1627.74 90.84 908.42 910.76 777.96 835.40 -10 1735.31 96.08 960.83 961.84 841.30 877.28
0 1671.38 93.03 930.29 932.07 806.66 854.80 0 1816.81 100.00 1000.00 1000.00 891.10 919.26
10 1715.90 95.21 952.11 953.34 831.40 874.60 10 1903.45 103.90 1039.04 1038.04 942.00 956.90
20 1761.28 97.39 973.90 974.57 859.98 894.70 20 1990.09 107.80 1077.95 1075.96 994.10 995.66
30 1807.48 99.57 995.65 995.77 885.91 915.10 30 2081.54 111.68 1116.75 1113.76 1047.50 1035.44
40 1854.46 101.74 1017.36 1016.92 913.72 935.90 40 2172.99 115.54 1155.45 1151.45 1102.20 1076.20
50 1902.22 103.90 1039.04 1038.04 942.00 956.90 50 2269.00 119.40 1193.99 1189.01 1158.20 1113.89
60 1950.74 106.07 1060.67 1059.12 970.94 978.30 60 2365.01 123.24 1232.43 1226.45 1215.60 1160.90
70 2000.01 108.23 1082.27 1080.17 1000.00 1000.00 70 2465.34 127.08 1270.75 1263.76 1274.30 1204.64
80 2050.02 110.38 1103.83 1101.18 1029.69 1022.00 80 2565.66 130.90 1308.95 1300.96 1334.40 1249.88
90 2100.75 112.54 1125.36 1122.15 1063.13 1044.40 90 2670.05 134.70 1347.03 1338.04 1396.00 1287.32
100 2152.21 114.68 1146.84 1143.08 1091.04 1067.00 100 2774.44 138.50 1385.00 1375.00 1459.00 1343.00
110 2204.38 116.83 1168.29 1163.98 1123.20 1090.00 110 2882.64 142.29 1422.85 1411.84 1523.50 1391.00
120 2257.24 118.97 1189.71 1184.84 1152.37 1113.30 120 2990.84 146.06 1460.60 1448.56 1589.60 1440.20
130 2310.79 121.11 1211.09 1205.66 1183.71 1137.00 130 3102.61 149.82 1498.20 1485.15 1657.20
140 2365.02 123.24 1232.43 1226.45 1215.60 1160.90 140 3214.37 153.58 1535.80 1521.63 1726.40
150 2419.91 125.37 1253.73 1247.19 1248.21 1185.20 150 3329.46 157.31 1573.08 1557.99 1797.20
160 2475.46 127.50 1275.00 1267.90 1284.32 1209.50 160 3444.54 161.04 1610.40 1594.22 1869.70
170 2531.65 129.62 1296.23 1288.58 1315.62 1234.70 170 3562.69 164.75 1647.50 1630.34 1943.80
180 2588.47 131.74 1317.42 1309.21 1348.09 1260.00 180 3680.84 168.46 1684.60 1666.33 2019.70
190 2645.92 133.86 1338.58 1329.81 1399.19 1285.60 190 3801.81 172.15 1721.46 1702.21 2097.30
200 2703.98 135.97 1359.70 1350.37 1419.63 1311.40 200 3922.77 175.84 1758.40 1737.96 2176.70
210 2762.64 138.08 1380.79 1370.90 1452.44 1337.70 210 179.50 1794.96 1773.60
220 2821.89 140.18 1401.84 1391.39 1487.67 1364.20 220 183.17 1831.70 1809.11
230 2881.72 142.29 1422.85 1411.84 1523.50 1391.00 230 186.80 1868.00 1844.50
240 2942.13 144.38 1443.83 1432.25 1560.22 1418.20 240 190.45 1904.50 1879.78
260 148.57 1485.67 1472.97 260 197.69 1976.90 1949.96
270 150.65 1506.54 1493.27
280 152.74 1527.38 1513.53
290 154.82 1548.17 1533.76
300 156.89 1568.94 1553.95
More detailed charts are available at www.kele.com in Technical Reference .
NEW!TEMPERATURE
1304
NEW!TEMPERA
TURE
20
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.kele.com888-397-5353 USA March 2014
SENSOR RESISTANCE CHART – PRECON THERMISTORS
PRECON TYPE II PRECON TYPE III PRECON TYPE IV Model 21 Model 22 Model 24 Model 27 Model 3 Model 42 2252Ω @ 77°F 3000Ω @ 77°F 10,000Ω @ 77°F 100,000Ω @ 77°F 10,000Ω @ 77°F 20,000Ω @ 77°F ±0.36°F from ±0.36°F from ±0.36°F from ±0.36°F @ 77°F ±0.36°F from ±0.36°F from 32° to 158°F 32° to 158°F 32° to 158°F ±1.3°F from 32° to 158°F 32° to 158°F 32° to 158°F Temp°F Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) -35 63.08K 84.09K 280.1K 2801K 203.6K 672.1K -30 52.72K 70.27K 234.1K 2341K 173.6K 557.2K -25 44.20K 58.92K 196.3K 1963K 148.3K 463.4K -20 37.19K 49.56K 165.1K 1651K 127.1K 386.7K -15 31.38K 41.83K 139.3K 1393K 109.2K 323.7K -10 26.57K 35.41K 118.0K 1180K 94.07K 271.9K -5 22.57K 30.07K 100.2K 1002K 81.23K 228.0K 0 19.22K 25.61K 85.35K 853.5K 70.32K 192.6K 5 16.42K 21.88K 72.91K 729.1K 61.02K 163.1K 10 14.07K 18.74K 62.48K 624.8K 53.07K 138.7K 15 12.08K 16.10K 53.64K 536.4K 46.27K 118.3K 20 10.41K 13.87K 46.23K 462.3K 40.42K 101.0K 25 8988 11.98K 39.91K 399.1K 35.39K 86.60K 30 7782 10.37K 34.56K 345.6K 31.06K 74.40K 35 6755 8999 30.00K 300.0K 27.31K 64.10K 40 5877 7830 26.10K 261.0K 24.06K 55.30K 45 5126 6830 22.76K 227.6K 21.24K 47.89K 50 4482 5971 19.90K 199.0K 18.79K 41.40K 55 3927 5231 17.44K 174.4K 16.65K 36.10K 60 3448 4594 15.31K 153.1K 14.78K 31.44K 65 3035 4043 13.48K 134.8K 13.15K 27.46K 70 2676 3565 11.88K 118.8K 11.72K 24.02K 75 2365 3150 10.50K 105.0K 10.46K 21.06K 80 2094 2789 9298 92.98K 9354 18.50K 85 1858 2475 8250 82.50K 8378 16.29K 90 1651 2200 7331 73.31K 7516 14.37K 95 1471 1959 6532 65.32K 6754 12.69K 100 1312 1748 5826 58.26K 6078 11.24K 105 1173 1562 5209 52.09K 5479 9.97K 110 1050 1399 4663 46.63K 4947 8.86K 115 941.8 1254 4182 41.82K 4472 7.88K 120 846.0 1127 3757 37.57K 4049 7.03K 125 761.3 1014 3381 33.81K 3671 6.27K 130 686.1 913.9 3047 30.47K 3333 5.61K 135 619.4 825.0 2750 27.50K 3031 5.03K 140 559.9 745.9 2486 24.86K 2759 4.51K 145 507.0 675.4 2251 22.51K 2515 4.06K 150 459.7 612.4 2041 20.41K 2296 3.65K 155 417.5 556.2 1854 18.54K 2098 3.29K 160 379.6 505.8 1686 16.86K 1920 2.97K 165 345.7 460.7 1535 15.35K 1759 2.69K 170 315.2 420.1 1400 14.00K 1614 2.43K 175 287.8 383.7 1278 12.78K 1482 2.20K 180 263.1 350.8 1168 11.68K 1362 2.00K 185 240.9 321.2 1070 10.70K 1254 1.82K 190 220.8 294.5 980.5 9805 1156 1.65K 195 202.6 270.3 899.6 8996 1066 1.51K 200 186.2 248.4 826.8 8268 984.0 1.38K 205 171.3 228.5 760.7 7607 909.8 1.26K 210 157.8 210.5 700.7 7007 841.9 1.15K 215 145.5 194.1 646.1 6461 779.8 1.05K 220 134.3 179.2 596.4 5964 723.0 967.5 225 124.2 165.6 551.5 5515 671.0 888.4 230 114.9 153.2 510.2 5102 623.3 818.4 235 106.4 141.9 472.5 4725 579.5 753.0 240 98.7 131.5 438.3 4383 539.4 693.6
PRECON THERMISTOR SENSOR RESISTANCE
The Precon sensor has a dissipation constant in still air at 25°C of 2 .7 mW/°C . The heat dissipation constant is an expression in milliwatts of the power required to raise the temperature of a thermistor 1°C above the ambient .