MagneticsThermistors Varistors Temperature Sensors

Fuse Resistors Noise SuppressorsFuses AntennasIgniters

Tubular Heating Hybrids and Substrates

Potentiometers and TrimmersVishay Intertechnology can support a wide range of applications with custom and specialty passive components including custom magnetics, power inductors, fuses, igniters, potentiometers, varistors, thermistors, and other passive devices. Contact your local sales office for a reliable source of quality components.

PRODUCT CATEGORY LEGEND

www.vishay.com© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED.

NTCLE413-428

Miniature PVC insulated leadsBattery sensor

THERMISTORS

NTCALUG01

Robust surface sensor-40 °C to +150 °C operating temperatureAutomotive useUL-recognized

THERMISTORS

NTCALUG02

Low thermal gradient surface sensorLow tolerances ±1 %, ± 0.5 %PEEK AWG30 nickel wires

THERMISTORS

NTCALUG03

Miniature surface sensorM2/M3 stud screw mountedLow thermal mass and fast response time

THERMISTORS

NTCS

Case size 0402, 0603, 0805-40 °C to 150 °C operating temperatureAutomotive useUL-recognized

THERMISTORS

NTHS

Case size 0402, 0603, 0805, 1206Wide resistance range

THERMISTORS

NTCLE100

Standard classicColor band codedWide resistance range

THERMISTORS

NTCLE203

High accuracyLow tolerances ±1 %, ± 0.5 %Thin nickel wires

THERMISTORS THERMISTORS

PTCCL

Voltage range 30 V to 600 VSmall trip-hold ratioUL-recognized

THIN FILM SENSORS - RTDTHIN FILM SENSORS - RTD

PTCSL03

One point over-temperature sensorsAccuracy ± 5 °C

THIN FILM SENSORS - RTD

PTS

Case size 0603, 0805, 1206Glass sealedHigh accuracy and stability < 0.04 %Lead (Pb)-free

VARISTORS

TFPT

Case size 0603, 0805, 1206Wide resistance range 100 Ω to 10 kΩ High stability < 0.15 %

VARISTORS

MLV

Case sizes 0402 through 2220Up to 95 VAC operation

POTENTIOMETERS

VDRS, VDRH

Standard and high surge capabilities5 mm through 20 mm nominal disc diameterHigh surge capability 6.5 kA, 10 kAExtended operating temperature

POTENTIOMETERS

PRV6P16P11L

2 fully sealed high power rating up to 1.5 W at 70 ˚CMilitary performance

Version for military, professional and industrial applications(cermet): 1 W at 40 ˚CCompact (integrated)Fully sealed and panel sealed

2 million cyclesCermet element12.5 mm square single turn panel control4, 6, and 6.35 mm shaft diameters and 29 terminal stylesMultiple assemblies - up to four modules

POTENTIOMETERS

THERMISTORS

POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS

POTENTIOMETERS

RT

CCTU 05-03B (PA1)Vitreous - RT style

POTENTIOMETERS

REC38L Multi-Turn Potentiometer

Ultra Flat Potentiometer

12.5 mm to 150 mmMiniature 9.52 mm diameter

From 10 turns to 200 turnsLinearity 2 %Big flexibility to adjust the number of turns to the request

Linearity 1.5 %Technology membrane (waterproof)Aeronautic, industrial, or outdoor versions available

POTENTIOMETERS POTENTIOMETERS TRIMMERS

T93

3/8” square multi-turnIndustrial grade0.5 W at 70 ˚C

TRIMMERS

TS63

¼” square multi-turn0.25 W at 70 °CIndustrial grade

TRIMMERS

TS53

5 mm square single turn0.25 W at 70 °C

NTCLE203…SB0

2 point 0.5 °C accurate sensor-55 °C to +150 °C operating temperatureAutomotive use

THERMISTORS

NTCLE305

Miniature epoxy-ETFE insulated leadsFast response timeAutomotive use

THERMISTORS

NTCS…SMT

Enhanced stability < 0.2 % typicalGlass sealed

THERMISTORS

UHF Antennas High Frequency Antennas

868 MHz, 915 MHz15 mm x 10 mm x 1.2 mm / 35 mm x 5 mm x 1.2 mm433 MHz, 868 MHz, 915 MHz > -2dBi

1.575 GHz to 5 GHz10x3x0.8; 3.2x1.6x0.6; 3.2x1.6x1.2; 5.2x2x1.1; 19x3x3.8;1.575 GHz, 2.4 GHz, 5 GHz > 3.2 dBi

ANTENNAS ANTENNAS

534

Bushing and servo mount designs availableSpecial resistance tolerances to 1 %Rear shaft extensions and support bearingMetric shaft available

502

Bushing mount and servo mount designs are availableLarge ohmic value range: 15 Ω to 100 kΩDual gang configurationImproved linearity available

KIT LMF

Measurement range 25 mm to 1000 mmHigh accuracy ± 1 % down to ± 0.025 %Good repeatabilitySimple and flexible mounting

ROT

Size 08 to 30Linearity ± 1 % down to ± 0.015 %Excellent repeatabilityLong life

34THE

All electrical angles available up to: 3600°Accurate linearity down to ± 0.5 %Very long life: 50M cycles for servo, 10M cycles for bushingNon contacting technology: Hall effect; true power-on sensor

981HE

Accurate linearity down to ± 0.5 %Easy mounting principleNon contacting technology: Hall effectModel dedicated to all applications in harsh environments

P11S

12.5 mm square single turn panel controlFive shaft diameters and 29 terminal stylesMultiple assemblies - up to seven modulesTests according to CECC 41000 or IEC 60393-1

P16S

Version for military, professional, and industrial applications (cermet): 1 W at 40 °CCompact (integrated)Detent and electric cut off at beginning of travelFully sealed and panel sealed

P30L

2 million cycles High power rating 3 W at 70 °C

MTLP

50 Ω micro-strip configurationTwo rows of tuning padsAvailable in custom lengths

HYBRIDS & SUBSTRATES

PSS, SPF

Custom substrates with conductor and resistor patternsWide variety of substrate materials and metallizations

HYBRIDS & SUBSTRATES

POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS POTENTIOMETERS SENSOR

DIALS 21 REC 115L 20 LHE 351HE

Round vernier scale1 13/16” diameter15 turn

Measurements range 25 mm to 1000 mmHigh accuracy ± 1 % down to ± 0.025 %

Linear non contacting 0 mm to 10 mm stokeAccurate linearity down to -1 %Long life: greater than 10M cycles

Non contacting10 M cyclesUp to 360° angle

RFLW

High frequency wire bondablespiral inductor3 nH to 150 nH Low parasitic capacitance, high SRFS-parameter files available for download

RF INDUCTORS

SDWP Side Wall Patterning

Conductor patterning on 4 surfacesWirebondable or solderable metallizations

HYBRIDS & SUBSTRATES

INT

Substrates with laser machiningFilled vias, plated through holes or non-metallized holes

HYBRIDS & SUBSTRATES

NSR, NSR HP AC03

1 kΩ to 15 kΩ; 20 %, 10 %9 µH to 78 µH Custom end caps and electrodes availableWirewound noise suppressor resistor

RFI / EMI suppression in automotive engine ignition systemWirewound technology on ceramic coreHigh voltage pulse handlingWide range of resistance and inductance to suit application

NOISE SUPPRESSORS NOISE SUPPRESSORS

PP22SA

Very robust version (vibrations, shocks)High durability (25 M cycles)Conductive plastic technologyAeronautic, military, industrial applications

POTENTIOMETERS

RP12

Conductive plastic potentiometer technologyInfinite resolution Anodized light alloy housingStainless steel floating shaft

POTENTIOMETERS

THERMISTORSTHERMISTORS

NTCAIMME3

Stainless steel miniature immersion sensor-25 °C to +105 °C operating temperature

NTCSMELF

DO35 glass encapsulated-40 °C to +150 °C operating temperature

IGNITERS IGNITERS

TUBULAR HEATING

EPIC

Very fast ignition down to 50 µsSurface-mount design for standard assembly processActive area according to customer specificationsCase size 0603 (SMD version only)

MEPIC

Stainless Steel Heating Elements

Firing energy down to 1.5 mJ Surface-mount design for standard assembly processActive area according to customer specificationsCase size 0805 (SMD version only)

Power range from 250 W up to 100 kWDielectric withstand up to 4 kVSingle elements or complete heatersApplication: heating, braking

High Frequency Inductors

Thin film, ceramic, and laser spiral technologyMultiple case sizesHigh Q, high SRF

RF INDUCTORS

HCTF CP - High Current Thermal Fuse Clamp

(235 ± 15) °C160 °C24 V≤ 50 A

FUSES

HCTF - High Current Thermal Fuse

(235 ± 15) °C160 °C24 V ≤ 55 A

MFU - Thin Film Chip Fuses

0.5 A to 6.3 A32 V to 63 VUL recognition; VDE IEC 60127-4ISO / TS 16949

FUSESFUSES

IHLP-01 Series

Case sizes 1616 through 6767Best saturationLowest core loss

IHLP-A1 Series

Cases sizes 1616 through 6767Automotive version of the -01 series

POWER INDUCTORSPOWER INDUCTORS

IHLP-1A Series

Case sizes 1616 through 8787Automotive version of the -11 series

POWER INDUCTORS

IHLP-5A Series

Case sizes 1616 through 8787Automotive version of the -51 series

POWER INDUCTORS

IHCL

Coupled inductor manufactured with IHLP technologyDesigned for SEPIC circuits

POWER INDUCTORS

IHLP-51 Series

Case sizes 1616 through 8787High temperature series

POWER INDUCTORS

IHLP-11 Series

Case sizes 1212 through 6767Medium perm seriesLow DCR

POWER INDUCTORS

ICM-2824, ICM-4743

Common mode chokeUsed for DC power lines

COMMON MODE CHOKES

ICM-0805, ICM-1206

Common mode chokeUsed for filtering

COMMON MODE CHOKES

IFSC

Shielded ferriteSmall sizes

POWER INDUCTORS

IHTH-0750, IHTH-1125

Through-hole inductor manufactured with IHLP® technologyAutomotive Grade

POWER INDUCTORS

TJ3-HT, TJ5-HT

ToroidHigh temperature, up to 200 °CVertical or horizontal options

POWER INDUCTORS

IDC, IDCS, IDCP

Drum core inductors available in multiple sizesShielded and unshielded

POWER INDUCTORS

IHSM

4 case sizes availableHigh inductance values up to 18 mH

POWER INDUCTORS

Multilayer Ferrite Inductors

0603, 0805, 1206 case sizesHigh reliabilityMagnetically self shielded

CHOKES

Ferrite Beads

Normal and high current bead series0402 to 1812 cases sizesMagnetically self shielded

FERRITE BEADS

IWASIWTX

Receiving coils / shields feature up to 10 W for Rx applicationsOptimized for 5 V and 7 V charging circuitry

WPC compatible transmitting coil A10 type Tx coilHigh permeability shielding for wireless charging

WIRELESS CHARGINGWIRELESS CHARGING

LPE Series

E-Core transformers in gapped and ungapped configurations

SURFACE-MOUNT TRANSFORMERS

Vishay Custom Magnetics

High current transformers and inductorsFocus on EV and HEV high voltage invertersUnique, thick copper conductors for up to 7.5 kW

CUSTOM - AUTOMOTIVECUSTOM - INDUSTRIAL

Vishay Custom Magnetics

Cockpit controls and backlight displayMobile communications systemsMissile launch and guidance systems

Vishay Custom Magnetics

Charging transformersTelemetry coilsCustom inductors for implant market

CUSTOM - MEDICAL

LPT Series

Toroidal designs available in three different core materials

SURFACE-MOUNT TRANSFORMERS

Crystals

Industry-standard sizesSurface-mount and through-hole

FREQUENCY CONTROL

Oscillators

Industry-standard oscillators

FREQUENCY CONTROL

AC..CS Fusible Wire-wound Safety Resistor

3 W to 5 WUL14124 kV to 6 kVWithout flame and explosion

FUSE RESISTORS

CUSTOM - AEROSPACE / MILITARY

IHLD

Optimal design realizes high quality sound and low distortionLow coupling for minimal cross-talk between inductors

POWER INDUCTORS

IHLE

Integrated E-Field shield eliminates the need for separate shieldingUp to 20 dB E-Field reduction at 1 cm

POWER INDUCTORS

IHHP

Magnetic alloy power choke coilMiniature size 0806 and 1008 sizesMagnetic shielding

POWER INDUCTORS

PLA51

Medium power up to 3 kWLow profile designHigh typical efficiency of 99 %   Excellent thermal characteristics 

PLA32

Low power up to 500 WCompact and versatileVery low profile and weightFor high power density DC/DC converter applications

POWER PLANAR TRANSFORMERS

POWER PLANAR TRANSFORMERS

RS Style Wirewound Fuse Resistor

0.12 Ω to 500 Ω; 10 %, 5 %Typical fusing times 4 ms to 70 msFusing currents of 0.5 A to 20 AFunctions as both resistor and series fuse

FUSE RESISTORS

PTS AT

Automotive useHigh thermal cycling capability-55°C to +175°C operating temperatureHigh accuracy and stability < 0.1 %

Wirewound Inductors

Case sizes from 0805 to 2220Open construction and molded versionsHigh Q, high SRF

RF INDUCTORS

Vishay Custom Magnetics

Switch mode power transformers, input / output inductors, filter inductorsFocus on complex designs for rugged environmentsWinding construction includes: edgewound coils, planar coils, bobbin-wound coils, and toroidal coils

Higher power density levels versus traditional planar designsEasily customized to meet design specific requirementsFull bridge/half bridge converter applications from 150 W to 300 W

TPL-2516

POWER PLANARTRANSFORMERS

The Art of Specialty Passives

UNFOLD OURSPECIALTYPASSIVES

CAPABILITIES