Influence wt.% of SiC and Boraxon the Mechanical Properties ofAlSi-Mg-TiB-SiC Composite bythe Method of Semi Solid Stir

Castingby Sulardjaka Sulardjaka

Submission date: 09-Aug-2018 02:33PM (UTC+0700)Submission ID: 988669452File name: SiC_and_borax_on_the_mechanical_properties_of _AlSiMgTiB_SiC.pdf (1,013.1K)Word count: 3100Character count: 15729

16%SIMILARITY INDEX

11%INTERNET SOURCES

11%PUBLICATIONS

8%STUDENT PAPERS

1 2%

2 2%

3 1%

4 1%

5

Influence wt.% of SiC and Borax on the Mechanical Propertiesof AlSi-Mg-TiB-SiC Composite by the Method of Semi SolidStir CastingORIGINALITY REPORT

PRIMARY SOURCES

Shirin Pourhosseini, Hossein Beygi, SeyyedAbdolkarim Sajjadi. " Effect of metal coating ofreinforcements on the microstructure andmechanical properties of Al-Al Onanocomposites ", Materials Science andTechnology, 2017Publicat ion

docplayer.netInternet Source

Submitted to Universitas Sebelas MaretStudent Paper

F. Souza, J. Lima, C. Rizziolli, I. Magno, A.Barros, A. Moreira, O. Rocha. "Microstructureand microhardness in horizontally solidif ied Al–7Si–0.15Fe–(3Cu; 0.3Mg) alloys", MaterialsScience and Technology, 2018Publicat ion

Kukshal, V., S. Gangwar, and A. Patnaik.

1%

6 1%

7 1%

8 1%

9 1%

10 1%

"Experimental and f inite element analysis ofmechanical and fracture behaviour of Al2O3particulate-f illed A356 alloy composites: PartII", Proceedings of the Institution of MechanicalEngineers Part L Journal of Materials Designand Applications, 2013.Publicat ion

Moonhee Lee, Yongbum Choi, KazuhiroMatsugi, Gen Sasaki, Tulugan Kelimu. " Effectof SiO amount on microstructures and tensileproperties of alumina short f iber-reinforcedcomposites by low-pressure infiltration method", Journal of Composite Materials, 2013Publicat ion

Ichsan Ristiawan, Muslim Mahardika. "Effect ofclearance and punch speed on the cuttingsurface quality results of a brass blanking onthe micropunch CNC machine", AIP Publishing,2017Publicat ion

www.materialsciencejournal.orgInternet Source

lutpub.lut.f iInternet Source

AMNE ELAHI, M., and S.G. SHABESTARI."Effect of various melt and heat treatmentconditions on impact toughness of A356

11 1%

12 1%

13 1%

14 1%

15 1%

aluminum alloy", Transactions of NonferrousMetals Society of China, 2016.Publicat ion

V Hotea, J Juhasz, F Cadar. "Grain refinementof 7075Al alloy microstructures by inoculationwith Al-Ti-B master alloy", IOP ConferenceSeries: Materials Science and Engineering,2017Publicat ion

Kukshal, V., S. Gangwar, and A. Patnaik."Experimental and f inite element analysis ofmechanical and fracture behavior of SiCparticulate f illed A356 alloy composites: Part I",Proceedings of the Institution of MechanicalEngineers Part L Journal of Materials Designand Applications, 2013.Publicat ion

N F D S Guterres, Rusnaldy, A Widodo. "TheEffect of Temperature in Induction SurfaceHardening on the Distortion of Gear", IOPConference Series: Materials Science andEngineering, 2017Publicat ion

Submitted to Coventry UniversityStudent Paper

Kumar, K. Ravi, and V. S. Sreebalaji."Desirability based multiobjective optimisation

16 1%

17 1%

18 1%

Exclude quotes Of f

Exclude bibliography Of f

Exclude matches < 1%

of abrasive wear and frictional behaviour ofaluminium (Al/3.25Cu/8.5Si)/f ly ashcomposites", Tribology - Materials Surfaces &Interfaces, 2015.Publicat ion

www.cnnmol.comInternet Source

Submitted to Curtin University of TechnologyStudent Paper

Zhu, M.. "Effects of T6 heat treatment on themicrostructure, tensile properties, and fracturebehavior of the modif ied A356 alloys",Materials and Design, 201204Publicat ion