this tutorial will show you two very easy ways that you can...

This tutorial will show you two very easy ways that you can create an AIM 360 Virtual Tour of your inventory that instantly gets sent to your webpages!

1. Use the AIM loading application.2. Convert your existing images into a virtual tour.

mailto:[email protected]://aim360.ca/360/?tracker_disabled=1&vin=2G1WB5E34D1191297&refer=aHR0cDovL3d3dy5uZXdjYXJzZWxsb2ZmLmNvbS8=

1. Login under your individual username.

2. Pick the desired vehicle from a list of your inventory.

3. Select “Outside, Inside & Hotspot” to begin taking pictures.

Create AIM360 with the AIM Capture AppAIM360

[email protected]

mailto:[email protected]:[email protected]:[email protected]

1. AIM Capture will prompt you to take the next picture in the list. By pressing “Take” the camera function will appear and allows you take a specific horizontal image.

2. For all Hotspots, AIM Capture will ask whether the vehicle has a specific option. Take the picture if it does or click “Pass” and the App will direct you to the next vehicle Hotspot.

3. Once the image taking process is complete, upload all of the images.

Create AIM360 with the Capture AppAIM360

[email protected]


If you want to reorganize the AIM360 application prompts follow the next 5 slides. This will allow you to control which image will be your 1st - Main Image and also help you keep a consistent set of images for all of your listings.

mailto:[email protected]

Click on the Load Screen in the AIM [email protected]


[email protected]

Find the AIM360 Icon and Click.


Drag the Image you wish to move into the location of your preference.★ The images at the top of the list will descend in chronological order. (1,2,3…)

[email protected]


Drag the images from the Left or Right Column to create a consistent prompt list.The Left Column are Active images.The Right Column are Disabled and will not prompt on the AIM Capture App.

[email protected]


Click Save when complete.The AIM Capture Application will need to be restarted in order to see any changes.

[email protected]


AIM360

Exterior shots – Start taking photos from the front of the vehicle. Keep the same distance away from the vehicle for each photo. Keep the same height for all pictures. The entire vehicle must to be in the picture to create the illusion of a 360 degree fluid movement.

If you wish to take fewer photos, an image can be taken every ¼ of the vehicle for a total of 8 exterior images. The effect will be less fluid but

AIM360 will still work as designed.

Passenger Rear Quarter

or

Passenger 5/8

Passenger Side

Passenger Front Quarter

or

Passenger 3/8

Passenger 1/8

Front of Vehicle

Driver Front ⅛

Driver Front Quarter

or

Driver 3/8

Driver Side

16 Exterior Images

Driver ⅝

or

Driver Rear Quarter

Driver ⅞

Rear of Vehicle

Passenger ⅞

http://aim360.ca/360/?tracker_disabled=1&vin=2G1WB5E34D1191297&refer=aHR0cDovL3d3dy5uZXdjYXJzZWxsb2ZmLmNvbS8=

Interior Photos – *** Take all photos from the perspective of the center console.

For the front seat photos, position yourself in the back seat.

For the rear photos position yourself in the front seat.

Inside Driver Front – Door/Dash

Full Center Dashboard

Interior Passenger Front - Door/Dash

6 Interior images

Rear Passenger - Interior

Backseat - center

Rear Driver - interior

AIM Tips - Take the front images from the Back Seat for the best result!

AIM Tips - Take the rear seat images from the Front Seat for the best result!

Hotspots – Hotspot images are designed to highlight the important features of your vehicle. If the vehicle doesn’t have a specific option or Hotspot, you can “skip” the photo when using the loading app. If there is detailed information regarding a specific feature, a description

about that feature will appear on the image for your customers.

Engine

Running Boards

Wheel

Tire Tread

Cargo (trunk, hatch or truck bed)

Inside Hot Spots

Steering Wheel

Navigation

Power Seat

Sunroof

Power Rear Window

Outside Hot Spots

Odometer

Mirrors

Trailer Hitch

Heater Controls

Radio / Bluetooth

Converting your existing images is easy!

Follow the step-by-step tutorial to find out how you can “tag” your existing images and have AIM360 instantly appear on your listings.

mailto:[email protected]

Step 1 - Click the picture icon to view your existing [email protected]


Step 2 - Select the AIM360 icon for each picture and choose from the drop down [email protected]


Step 3 - Choose the Image description or Hotspot option for each image and the computers will automatically place the image in its correct location.

[email protected]


Step 4 - When complete, the location will be displayed at the bottom of the image and the AIM360 Viewer will appear for previewing.

[email protected]


Step 5 - The AIM360 icon will also appear on the inventory page once it becomes active for you to quickly see which units are not enhanced.

[email protected]


Finished Product - Your customers will have a fully interactive virtual tour.Click Here to view an active virtual tour!

[email protected]
http://aim360.ca/360/?tracker_disabled=1&vin=2G1WB5E34D1191297&refer=aHR0cDovL3d3dy5uZXdjYXJzZWxsb2ZmLmNvbS8=http://aim360.ca/360/?tracker_disabled=1&vin=2G1WB5E34D1191297&refer=aHR0cDovL3d3dy5uZXdjYXJzZWxsb2ZmLmNvbS8=mailto:[email protected]:[email protected]:[email protected]

this tutorial will show you two very easy ways that you can...

Documents