T I G E RC R A N E S

The Tiger Crane 1061 was designed and built to provide theoperator an enhanced level of speed, control and safety in thetelescoping crane market. The crane can move to a workingposition quickly, and then uses the exclusive Auto II Speedload sensing system to automaticallyreduce all function speeds when a loadis sensed. This also increases the safetyof operating the crane by limiting thespeed by which the operator can move aload. The Auto II Speed system alsoincreases the feel and controlof the proportional system, byusing the full resolution ofthe trigger to control thelower speed. The hydraulicplanetary winch provides unequaledlow speed control, yet will spool to 60ft/min. The winch is also mounted to the boom tomaintain deployed cable length when booming up or down. The valvesystem utilizes integrated filtration using an absolute 9 micron filter toclean all the hydraulic oil before it enters the crane, ensuring contaminant free operation of valves and motors. Hex Boom Designincorporates the use of high tensile strength steel for greater strength andreduced weight. A double reduction rotation package provides 400’ ofrotation and the strength to rotate the rated lift capacity up an incline.The closed center rotation section prevents water from entering the cranetower. Wireless proportional controlfeatures frequency hopping technology for interference free use. A 33 ft tether cordcomes standard, and can be used instead ofbatteries, or in areas where radio use is notpermitted. The indicator bank provides directfeed back on crane operation including radiolink, overload condition, speed, anti two blockand filter bypass. An indicator test light switch is standard.

1061

1061

Standard Features:• 62,000 ft/lbs rating • 11,000 lbs lift @ 5.6 ft • 21 ft of hydraulic reach • Hex boom Construction • Planetary Winch • Worm Drive Rotation • Crane Operation Light Bar • Powder Coated Components

877 1ST AVE NWSIOUX CENTER IA 51250 1-800-225-8789FAX: 712-722-3706www.tigercranes.com

DISTANCE (FT.)

11000*

5881*

4158

3395

3044

2940

11000*

10262*

7256*

5924*

5312

5131

75°

60°

45°

30°

15°

21'1"

12'1"

12'1" 21'1"

* MAXIMIUM SINGLE LINE CAPACITY IS5500 LBS (2494kg) IN THESE OPERATING POSITIONS

LOAD CAPACITIES

(1333)

(1380)

(1540)

(1886)

(2667)

(4989)

(2327)

(2409)

(2687)

(3291)

(4654)

(4989)

DEC261

0

(KILOGRAMS)POUNDS

18'15'9'6'3'

MODEL 1061

TIGER Model 1061 Specifications

Crane Rating: 62,000 ft/lbs

Maximum Reach: 21 ft from CL

Extension: Single hyd from 12 to 21 ft

Maximum Height: 23 ft from base of crane

Maximum Lift: 5500 lbs single part line

11,000 lbs double part line

Boom Elevation: -5 to +75 degrees

Cable: Galvanized 120 ft

Winch Type: Hydraulic Planetary

Winch Speed: 60 ft/min*

Rotation: 400 degrees with double reduction

(worm & pinion)

Control: Wireless proportional with 33 ft

Tether cord

Stowed Height: 41"

Weight: 2070 lbs (crane only)

Mounting Space: 23" x 30"

Valves: 12 VDC D03 12 GPM

Filter: 9 Micron Absolute

Pump Req’d: 9 GPM @ 2600 PSI

Min Chassis GVW Req’d: 25,500 lbs

*Speeds represented are with recommended pump and an unloaded single line.

TIGERCRANES

Designed and Mfg in the USA byLocal Distributor

Service Trucks International

Rev 01.06/3k