timberjack skidders 360d 460d 560d - · pdf filedifferential locks can’t be beat. in...

360D 460D 560D

T I M B E R J A C K S K I D D E R S E N

Make your next skidder YOUR skidder, handpicked from the

widest range of models and options in the industry. You’ll find the

size and power your job needs, with the high-torque diesel engines,

the choice of transmissions, axles, grapples, winches, cab comforts

and a host of other options that let you virtually customize the

ideal skidder to work in your kind of wood and terrain – and to

get you the biggest production numbers.

Innovative electronically-controlled John Deere engines deliver the

high torque-on-demand and powerful rim pull to keep your landing

busy with quick skidder turnaround and fast cycles. On firm ground, the

direct-drive powershift transmission, tight turn radius, and push-button

differential locks can’t be beat. In soft going or on severe ground, the

optional torque converter powershift on the 460D keeps you moving.

For bigger loads over longer hauls, the variable torque curves of the

560D engine put out more torque in each gear selection. Single arch

grapple, dual arch grapple or cable skidders – all have the power and

reliability to drive your business.

There’s one right for you

Your power of choice

T I M B E R J A C K S K I D D E R S

360D

460D

560D

M O D E L S

CABLE, SINGLE ARCH GRAPPLE, DUAL ARCH GRAPPLE SKIDDERS 129 hp (96 kW) TO 181 hp (135 kW)

P O W E R

2/3

DIRECT DRIVE POWERSHIFT – TORQUE CONVERTER POWERSHIFT

T R A N S M I S S I O N S

The 360D and 460D feature 6.8 L

John Deere turbocharged engines. They

have the steep torque rise to lift heavy

loads, get them started quickly, and keep

you moving over rough ground. What’s

new is the electronically controlled,

common rail fuel injection system that

controls the big power bulge programmed

into the torque curve. Power is automati-

cally increased as a load tries to pull

down the engine, resulting in the most

efficient use of power at every stage of

each cycle. These reliable engines have

heavy-duty engine blocks, high capacity

oil and water pumps, and hardened,

replaceable wet cylinder liners.

The 560D is powered by a John Deere

8.1 L turbocharged diesel. It delivers a

steep torque rise for easier load-starting,

better low-speed driveability, superior

lugging power, and best-in-class fuel

economy. It can maintain high torque

Bigger power bulge

Variable output, higher torque

It all begins with the engine,the heart of the skidder. Thenext generation John Deerediesel engines use a trulyadvanced, electronically controlled fuel injection systemto run cleaner and produce the torque you need, when you need it. All average lowrpms, so they run within theircapacities, saving fuel and engine wear.

Quality means nocompromises


360D

460D

560D

as low as 1,200 rpm. Variable power

settings are programmed for different

gears. In 1st and 2nd gears, the base

fuel curve is utilized. In 3rd gear, the

fuel pump adjusts to increase power,

allowing the skidder to pull bigger

loads, or the same load faster than

previous models.

Direct drive or torque converter

powershift – choose the one that’s right

for your job. On mostly firm ground and

for short-to-medium skidding distances,

the standard direct drive powershift

transmission puts the most power to the

wheels, and makes the most of every

drop of fuel. The close-ratio gear

selection through eight forward and

seven reverse gears lets the operator

choose exactly the right gear

to maintain the best speed

for load size and ground

conditions.

You pull bigger loads, faster.

For really soft going, steep slopes or severe

ground, the smooth, steady traction of

the torque converter powershift can make

all the difference. Optional on all 460D

skidders, the torque converter lets you

pull a full load over spongy ground or

rough, hilly terrain without wheel spin

or fast shifting. You get smoother accelera-

tion and faster cycle time with less ground

disturbance. It’s easy on the operator, too,

with less shifting and an electronic bump

shifter that remembers the last gear

selected, a time-saver for quick forward

and reverse shifting. The single lever

pilot-operated grapple control is a

popular option.

A transmissionright for you

4/5

Attention to detail makes the driveline

the most reliable yet. The transmission

has a greasable output seal. Internal oil

flow for the bearing to the front housing

gives a more consistent flow, and elimi-

nates external lines to avoid damage.

Heavier components and new seals

all contribute to driveline strength

and durability.

The cab can be released and hydraulically

tilted in a few minutes for access to the

transmission and other driveline compo-

nents. Routine servicing is well planned

throughout, including quick-release fuel

filters and separators, spin-on oil filters,

and oil drain shut-off for spill-free oil

changes.

Four axle choices, all with hydraulic lock

differentials and axle brakes, let you

Quick, tilt-cab access

Put a powerful driveline

with the right axles and

tires for the ground

conditions, and you get

the rim pull to skid heavy

loads throughout each shift.

Strongest driveline ever


360D

460D

560D

match tires and ground conditions:

standard, heavy duty, extreme-duty and

the super-wide, extreme-duty (SWEDA)

for the biggest flotation tires or duals.

The 100-inch (254 cm) SWEDA has a

massive housing, large axle and flange,

plus its own dipstick for fast oil check.

Wheel end face seals proven on this

axle are now standard on all 1400

series axles.

Mounted inboard on both axles, the

hydraulic wet-disc brakes are completely

sealed and immersed in an oil cooling

bath. They are self-equalizing and

self-adjusting for wear, so you don’t

have to service them periodically. The

spring-applied, hydraulically released

park brake can be manually applied. It

automatically engages when the engine

is shut down with the ignition key.

Axles built for the forest

Low-maintenancebrakes

6/7

The quiet, isolation-mount cabin has a

tinted front windshield and a sun visor,

and heavy screens secure the sides and

back. Inside, there’s everything you need

to take the hard work out of skidding.

The seat is fully adjustable for individual

height and weight. The steering wheel

with spinner knob is adjustable, too.

Tilt up or down and move in or out so

it’s right for you. An electronic hand

throttle option with three pre-set speeds

lets the operator free up his throttle

pedal foot. There’s plenty of legroom

and a wide accelerator pedal. Mounted

on the armrest, the direct drive gearshift

lever has a pushbutton to lock and

unlock the differential lockups. And

you’ll find all the small extras that make

a difference – a dome light, storage

under the armrest for cassette tapes with

cell phone hookup, a beverage holder,

door bins, and a hook for your jacket.

Doesn’t miss a thing

Whether you choose the standard cab with front wind-shield and screened openings, or go all out with the optionalfull window enclosure and air conditioning, this cab is a functional workplace that lets you choose your own comfortposition. Both the seat and the steering wheel are fullyadjustable to suit each operator.The seat swivels so you don’tneed to strain. And the soft-touch levers are positioned to give easy control with theleast amount of effort.

Set your own comfort level

Mounted in anarrow, verticalpanel on the rightrear post, the control knobs forheating, venting,air conditioning,and windshieldwipers are handyto reach withoutobstructing visibility.


360D

460D

560D

The optional fully enclosed cab has

polycarbonate windows on all openings

with screens on the door windows only.

This well-sealed cab keeps dust out

and helps the air conditioning, venting,

and heating systems operate at peak

efficiency. The optional AM/FM stereo,

located in the contoured headliner with

remote speakers, has a CD or cassette

player option.

Mechanical suspension, air suspension,

vinyl, cloth – take your pick. All seats

are adjustable in height, in forward / back

position, in backrest angle, and in

armrest height. The seat swivels from

15 degrees to 22.5 degrees to 30 degrees –

less neck or back strain when looking

to the rear.

A quick glance tells you engine

temperature, transmission oil tempera-

ture, and fuel level. The select button

to the left calls up digital readouts for

hour meter, gear selection, battery

voltage, engine rpm, and hydraulic oil

temperature, along with fault codes

for the engine and transmission. The

warning indicators across the bottom

are accompanied by audible alarm

beeps, either critical for immediate

shut-down or cautionary to warn

of less critical malfunction.

Keep the weatheroutside

Choice of seats

Large, full-functionmonitor

8/9

Each has its place. The single arch simply

lowers and raises the grapple head. It

works best where it can pick up tightly

bunched piles in a single pass. The dual

arch reaches back as well as up and down.

It saves time moving the skidder when

loads are scattered or upslope. It can also

pull the load in over the rear for the best

weight distribution and heavy load

control over longer hauls.

Timberjack grapples pick up a load first

try without fishing around. Each tong has

its own cylinder so the tongs adjust to

the load. A high torque motor drives the

grapple through 360-degree continuous

rotation. Closed-center, load-sensing

hydraulics maintain constant pressure on

the tongs from start to finish. Tongs are

box construction with three internal ribs

on each, stronger with less weight. Tong

tips are wear-resistant cast steel. And the

hose routing avoids abrasion. You won’t

find better grapples anywhere.

Single arch or dual

Quickest, tightest grapples

Grapple or cable skidding, you

can count on Timberjack for

the fastest load gathering and

the most secure hold on stems

from the stump to the landing.

You get big loads, too, with

the right front-to-back weight

distribution to keep traction

on the front tires, plus fast

maneuvering with 90-degree

stop-to-stop articulation and

differential locks front and

rear.

Big loads,fast


360D

460D

560D

Designed specifically to make first

thinnings more profitable, this optional

460D Single Arch Grapple Skidder can

pull larger loads each turn to produce a

sizeable increase in the amount of wood

to the landing every shift. It has a large

123-in (312 cm) grapple and an

extended 145-in (368 cm) wheelbase.

The longer wheelbase gives the balance

and stability to handle larger loads, and

improves traction when reversing uphill

or backing up to a gate delimber.

You can see at a glance that the rear

assembly on the cable skidders is exactly

what you need to withstand the heavy

buffeting they endure. The big, adjustable

fairlead, heavy butt pan, see-through

ramguard screen, and strong fenders

protect the tires, rear frame and winch –

and the operator. The fenders do even

more. They are shaped to guide butts

into the best position for load control

during skidding.

The Timberjack 4000 winch, standard

on the cable skidders, has earned its

reputation as the most reliable winch

you can put on a skidder. It’s fast, too,

with a bare drum linepull up to 212 kN

(47,697 lbf). Operated by a single lever,

it’s a sealed unit with wet-disc clutch

and brake, and pressurized lubrication.

A bigger, more powerful winch is optional

on the 460D and 560D. The 6000 has a

bare drum linepull of 225 kN (50,517 lbf)

and larger drum capacity.

The standard decking blade has a replace-

able, weld-on cutting edge of high carbon

material for longer life. The approach

angle makes short work of decking logs

and road maintenance. A heavy-duty

blade, optional on the 460D and 560D,

is wider at 9-ft 8-in (2,95 m)

and has a heavier weld-on

cutting edge. The wider

blade gives more tire

protection, and the added

weight on the front end improves weight

distribution with heavy loads.

SouthernThinning Special

Strong, versatiledecking blade

Powerful winches

Robust fairleadand fenders

10/11

T I M B E R J A C K

G R A P P L E S K I D D E R S

360 D 460 D 560 DTechnical Data

Engine 360 D 460 D 560 D

Type......................................................John Deere 6068T, 6-cylinder, emissions John Deere 6068H, 6-cylinder, emissions John Deere 6081H, 6-cylinder, emissionscompliant, with altitude-compensating, compliant, with altitude-compensating, compliant, with altitude-compensating,spark-arresting turbocharger spark-arresting turbocharger spark-arresting turbocharger

Rated power @ 2,200 rpm ..................129 SAE gross hp 96 kW 168 SAE gross hp 125 kW 177 SAE gross hp 132 kWWith torque-converter option....................................................................................181 SAE gross hp 135 kW

Peak power..........................................117 SAE net hp 87 kW 160 SAE net hp 119 kW 171 SAE net hp 127 kWWith torque-converter option....................................................................................171 SAE net hp 128 kW

Displacement.......................................414 cu-in 6,8 L 414 cu-in 6,8 L 494 cu-in 8,1 LMaximum net torque............................32% @ 1,400 rpm / 383 lb-ft 522 Nm 30% @ 1,400 rpm / 494 lb-ft 670 Nm 37% @ 1,400 rpm / 578 lb-ft 785 Nm

With torque-converter option....................................................................................28% @ 1,400 rpm / 529 lb-ft 717 NmFuel consumption, typical ....................2.7 to 4.0 gal/hr 10,4 to 15 L/h 4.0 to 5.7 gal/hr 15,0 to 21,6 L/h 4.1 to 6.2 gal/hr 15,5 to 23,4 L/h

With torque-converter option....................................................................................4.5 to 6.3 gal/hr 17,0 to 23,8 L/hAir cleaner ...........................................dual stage with safety element and dust dual stage with safety element and dust dual stage with safety element and dust

unloader valve unloader valve unloader valveCooling system ....................................heavy-duty radiator with in-line core coolant heavy-duty radiator with in-line core coolant heavy-duty radiator with in-line core coolant

recovery reservoir recovery reservoir recovery reservoirCooling fan ..........................................blower blower blowerLubrication...........................................pressure system with oil cooler pressure system with oil cooler pressure system with oil coolerOil filter................................................vertically mounted spin-on vertically mounted spin-on vertically mounted spin-onElectrical system..................................12 volt with 65-amp alternator 12 volt with 65-amp alternator 12 volt with 65-amp alternatorBattery (two 12 volt) ............................reserve capacity: 360 min, 1,850 CCA reserve capacity: 360 min, 1,850 CCA reserve capacity: 360 min, 1,850 CCA

Transmission 360 D / 460 D / 560 D

Type.....................................................direct-drive power shift*Oil filtration ..........................................10 micron pressure side with bypass*Power shift with torque converter optional on 460D only

Power Train Performance 360 D 460 D 560 D

with 28L-26 tires with 30.5-32 tires with 30.5-32 tiresNo tire slip ...........................................maximum speed maximum drawbar maximum speed maximum drawbar maximum speed maximum drawbar

@ 2,200 rpm @ peak torque @ 2,200 rpm @ peak torque @ 2,200 rpm @ peak torqueForward

Gear 1 ...........................................1.5 mph 2,4 km/hr 32,745 lbs 146 kN 1.7 mph 2,7 km/hr 37,645 lbs 167 kN 1.7 mph 2,7 km/hr 42,385 lbs 189 kNGear 2 ...........................................2.0 mph 3,2 km/hr 24,672 lbs 110 kN 2.3 mph 3,7 km/hr 28,364 lbs 126 kN 2.3 mph 3,7 km/hr 31,935 lbs 142 kNGear 3 ...........................................2.6 mph 4,2 km/hr 18,535 lbs 82 kN 3 mph 4,8 km/hr 21,309 lbs 95 kN 3 mph 4,8 km/hr 23,992 lbs 107 kNGear 4 ...........................................3.5 mph 5,6 km/hr 13,963 lbs 62 kN 4 mph 6,4 km/hr 16,052 lbs 71 kN 4 mph 6,4 km/hr 18,074 lbs 80 kNGear 5 ...........................................4.6 mph 7,4 km/hr 10,462 lbs 47 kN 5.4 mph 8,7 km/hr 12,028 lbs 54 kN 5.4 mph 8,7 km/hr 13,542 lbs 60 kNGear 6 ...........................................6.1 mph 9,8 km/hr 7,867 lbs 35 kN 7.2 mph 11,6 km/hr 9,044 lbs 40 kN 7.2 mph 11,6 km/hr 10,183 lbs 45 kNGear 7 ...........................................9.1 mph 14,7 km/hr 5,313 lbs 24 kN 10.7 mph 17,2 km/hr 6,108 lbs 27 kN 10.7 mph 17,2 km/hr 6,878 lbs 31 kNGear 8 ...........................................12.1 mph 19,5 km/hr 3,987 lbs 18 kN 14.1 mph 22,7 km/hr 4,584 lbs 20 kN 14.1 mph 22,7 km/hr 5,159 lbs 23 kN

ReverseGear 1 ...........................................1.5 mph 2,4 km/hr 32,745 lbs 146 kN 1.7 mph 2,7 km/hr 37,645 lbs 167 kN 1.7 mph 2,7 km/hr 37,645 lbs 167 kNGear 2 ...........................................2.0 mph 3,2 km/hr 24,672 lbs 110 kN 2.3 mph 3,7 km/hr 28,364 lbs 126 kN 2.3 mph 3,7 km/hr 28,364 lbs 126 kNGear 3 ...........................................2.6 mph 4,2 km/hr 18,535 lbs 82 kN 3 mph 4,8 km/hr 21,309 lbs 95 kN 3 mph 4,8 km/hr 21,309 lbs 95 kNGear 4 ...........................................3.5 mph 5,6 km/hr 13,963 lbs 62 kN 4 mph 6,4 km/hr 16,052 lbs 71 kN 4 mph 6,4 km/hr 16,052 lbs 71 kNGear 5 ...........................................4.6 mph 7,4 km/hr 10,462 lbs 47 kN 5.4 mph 8,7 km/hr 12,028 lbs 54 kN 5.4 mph 8,7 km/hr 12,028 lbs 54 kNGear 6 ...........................................6.1 mph 9,8 km/hr 7,867 lbs 35 kN 7.2 mph 11,6 km/hr 9,044 lbs 40 kN 7.2 mph 11,6 km/hr 9,044 lbs 40 kNGear 7 ...........................................9.1 mph 14,7 km/hr 5,313 lbs 24 kN 10.7 mph 17,2 km/hr 6,108 lbs 27,2 kN 10.7 mph 17,2 km/hr 6,108 lbs 27 kN

Axles.......................................360 D / 460 D / 560 DFinal drives ..........................................heavy-duty planetary, mounted inboardDifferentials .........................................hydraulic locking, operated on the goFront axle oscillation ............................30 degrees, stop to stop

Brakes

Service brakes.....................................long-life, inboard-mounted wet disc oil cooled, self-adjusting and self-equalizing front and rear axlesParking brake ......................................automatically spring-applied, hydraulically released, sealed and lubricated, wet multi-disc, integrally mounted in transmission

Steering

Frame articulation................................90 degrees total, stop to stopSteering wheel with Orbitrol™ valve

Hydraulic System 360 D 460 D 560 D

Pump...................................................variable-displacement axial piston variable-displacement axial piston variable-displacement axial pistonMaximum rated flow......................27 gpm 102 L/min @ 2,200 rpm 42 gpm 159 L/min @ 2,200 rpm 42 gpm 159 L/min @ 2,200 rpmPressure ........................................3,000 psi 20 684 kPa 3,000 psi 20 684 kPa 3,000 psi 20 684 kPa

Oil filtration ..........................................one 10 micron return oil with bypass one 10 micron return oil with bypass one 10 micron return oil with bypass

Winch (Optional)

Type.....................................................sealed, wet multi-disc clutch and brake sealed, wet multi-disc clutch and brake sealed, wet multi-disc clutch and brakepressurized lubrication pressurized lubrication pressurized lubricationsingle lever control single lever control single lever control

Cable capacity .....................................4000 (8-in drum) 4000 (10-in drum) 4000 (8-in drum) 4000 (10-in drum) 6000 (11-in drum)0.625-in 15,8 mm cable................254-ft 77,4 m 199-ft 60,6 m 254-ft 77,4 m 199-ft 60,6 m 373-ft 114 m0.75-in 19,1 mm cable..................179-ft 54,6 m 141-ft 43 m 179-ft 54,6 m 141-ft 43 m 263-ft 80,2 m0.875-in 22,2 mm cable................129-ft 39,3 m 101-ft 30,8 m 129-ft 39,3 m 101-ft 30,8 m 189-ft 58 m1-in 25,4 mm cable.......................100-ft 30,5 m 78-ft 23,8 m 100-ft 30,5 m 78-ft 23,8 m 147-ft 45 m

Linepull @ peak engine,0.625-in 15,8 mm cable bare drum full drum bare drum full drum bare drum full drum

4000 (8-in drum high speed).........31,726 lb 141 kN 19,036 lb 85 kN 40,942 lb 182 kN 24,565 lb 109 kN4000 (8-in drum standard speed) .....36,960 lb 164 kN 22,176 lb 99 kN 47,697 lb 212 kN 28,618 lb 127 kN4000 (10-in drum high speed).......30,003 lb 133 kN 22,176 lb 99 kN 38,719 lb 172 kN 28,618 lb 127 kN6000 (11-in drum high speed) ............................................................................................................................................................50,517 lb 225 kN 31,527 lb 140 kN

Line speed @ 2,200 rpm,0.625-in 15,8 mm cable bare drum full drum bare drum full drum bare drum full drum

4000 (8-in drum high speed).........142 fpm 236 fpm 142 fpm 236 fpm43,2 m/min 72,0 m/min 43,2 m/min 72,0 m/min

4000 (8-in drum standard speed) .....122 fpm 203 fpm 122 fpm 203 fpm37,1 m/min 61,8 m/min 37,1 m/min 61,8 m/min

4000 (10-in drum high speed).......150 fpm 203 fpm 150 fpm 203 fpm45,7 m/min 61,8 m/min 45,7 m/min 61,8 m/min

6000 (11-in drum high speed) ............................................................................................................................................................128 fpm 205 fpm39,0 m/min 62,5 m/min

12/13™Orbitrol is a registered trade mark of Eaton Corp.

T I M B E R J A C K



Dimensions 360 D 460 D 560 D

Tire size ...............................................28L-26, 12 PR LS2 28L-26, 14 PR LS2 30.5-32, 16 PR LS2A Overall height* .............................9-ft 10.5-in 3,01 m 9-ft 11-in 3,03 m 10-ft 3.1-in 3,13 mB Maximum blade lift above ground....3-ft 11.6-in 1,21 m 4-ft 3.5-in 1,31 m 4-ft 11-in 1,50 mC Maximum blade dig below

ground .........................................11.3-in 288 mm 14.5-in 367 mm 14.2-in 360 mmD Front axle to front of machine ......4-ft 11.3-in 1 507 mm 5-ft 6.3-in 1 685 mm 5-ft 10-in 1 777 mmE Front axle to blade cutting

edge arc ......................................6-ft 11.2-in 2 112 mm 7-ft 6.2-in 2 292 mm 8-ft 1.4-in 2 474 mmF Front axle to articulation joint.......5-ft 2-in 1 575 mm 5-ft 8-in 1 727 mm 5-ft 8-in 1 727 mmG Wheelbase ...................................9-ft 7-in 2 920 mm 11-ft 3-in 3 430 mm† 12-ft 1-in 3 680 mm

*Add 6.3-in 160 mm when equipped with water tank†Dual-function machine features a 12-ft 1-in 3 680 mm wheelbase

GRAPPLE single function single function dual function single function dual functionH Height of grapple from ground

level.............................................34-in 31-in 4-ft 6-in 34-in 4-ft 4.4-in864 mm 908 mm 1 376 mm 863 mm 1 331 mm

I Reach of grapple at ground level.....6-ft 5.6-in 7-ft 4.3-in 5-ft 1-in 7-ft 3.5-in 5-ft 1-in1 970 mm 2 243 mm 1 536 mm 2 222 mm 1 547 mm

J Reach of grapple at full reach ......7-ft 1-in 7-ft 11.8-in 9-ft 8.9-in 7-ft 11.8-in 9-ft 8.9-in2 158 mm 2 433 mm 2 968 mm 2 432 mm 2 968 mm

K Maximum height of boom ............9-ft 10-in 10-ft 6-in 12-ft 1-in 10-ft 9.8-in 12-ft 4.9-in2 991 mm 3 195 mm 3 680 mm 3 296 mm 3 781 mm

L Below ground reach of grappleat full reach .................................34-in 37-in 42.2-in 38.9-in 44-in

872 mm 942 mm 1 072 mm 988 mm 1 117 mmM Overall length...............................20-ft 9-in 23-ft 8.6-in 24-ft 1-in 25-ft 7.9-in 25-ft 5.6-in

6 330 mm 7 230 mm 7 345 mm 7 821 mm 7 763 mm

360 D Dimensions with Tires

23.1-26 28L-26 24.5-32Tire size ...............................................23.1-26 28L-26 24.5-32 (narrow gauge) (narrow gauge) (narrow gauge)N Ground clearance.........................19.6-in 498 mm 20.2-in 514 mm 23.5-in 598 mm 19.6-in 498 mm 20.2-in 514 mm 23.5-in 598 mmO Wheel tread .................................7-ft 3-in 2,21 m 7-ft 6-in 2,29 m 8-ft 2-in 2,49 m 6-ft 8.9-in 2,06 m 7-ft 2-in 2,18 m 7-ft 5-in 2,26 mP Overall width...................................9-ft 2-in 2,79 m 9-ft 10-in 3,0 m 10-ft 2.5-in 3,11 m 8-ft 8-in 2,64 m 9-ft 6-in 2,90 m 9-ft 5.5-in 2,88 m

Turning radius over tires ..............17-ft 11-in 5,474 m 18-ft 1-in 5,512 m 17-ft 6-in 5,398 m 17-ft 6-in 5,460 m


28L-26 24.5-32Tire size ...............................................28L-26 24.5-32 30.5-32 (narrow gauge) (narrow gauge)N Ground clearance.........................20.2-in 514 mm 23.5-in 598 mm 24.2-in 615 mm 20.2-in 514 mm 23.5-in 598 mmO Wheel tread .................................7-ft 10.5-in 2,40 m 8-ft 2-in 2,49 m 8-ft 1-in 2,46 m 7-ft 6.5-in 2,29 m 7-ft 5-in 2,26 mP Overall width................................10-ft 2.5-in 3,11 m 10-ft 2.5-in 3,11 m 10-ft 7.5-in 3,23 m 9-ft 10.5-in 3,01 9-ft 5.5-in 2,88 m

Turning radius over tires ..............18-ft 9-in 5,7 m


Tire size ...............................................24.5-32 30.5-32N Ground clearance.........................22.9-in 582 mm 23.6-in 599 mmO Wheel tread .................................8-ft 2-in 2,49 m 8-ft 1-in 2,46 mP Overall width................................10-ft 2.5-in 3,11 m 10-ft 7.5-in 3,23 m

Turning radius over tires ..............21-ft 6,4 m

14/15

Dimensions with Grapple

360 D 460 D 560 D

STANDARDGRAPPLE HEAD

Q Tong opening at tips ................ 7-ft 1-in 2 160 mm 9-ft 7-in 2 921 mm 10-ft 3-in 3 124 mm

R Enclosure area,tongs tip to tip .... 8 sq-ft 0,75 m2 10.4 sq-ft 0,97 m2 11.7 sq-ft 1,09 m2

S Minimum diameter of stem .............. 5-in 24 mm 5.5-in 140 mm 5.2-in 132 mm

460 D 560 D

HIGH-CAPACITY GRAPPLE HEAD

Q Tong opening at tips ................ 10-ft 3-in 3 124 mm 10-ft 7-in 3 226 mm

R Enclosure area,tongs tip to tip .... 11.7 sq-ft 1,09 m2 14.9 sq-ft 1,38 m2

S Minimum diameter of stem .............. 5.2-in 132 mm 6.0-in 152 mm

Timberjack 360 D / 460 D / 560 D Grapple Skidders

360 D / 460 D / 560 D with Single-Function Grapple

460 D / 560 D with Dual-Function Grapple

T I M B E R J A C K



Ground Pressure Data 360 D 460 D 560 D

Tires ....................................................single function single function dual function single function dual function23.1-26 .........................................7.3 psi 50,3 kPa28L-26 ..........................................6.1 psi 42,2 kPa 7.2 psi 49,7 kPa24.5-32 .........................................6.6 psi 45,7 kPa 7.8 psi 53,7 kPa 8.2 psi 56,7 kPa 8.6 psi 60,3 kPa 9.0 psi 62,2 kPa30.5-32 .........................................5.5 psi 38,2 kPa 6.5 psi 44,6 kPa 6.8 psi 47,0 kPa 7.2 psi 49,9 kPa 7.5 psi 51,5 kPa67/34-25 or 26..............................5.5 psi 38,1 kPa 6.5 psi 44,6 kPa 6.8 psi 47,0 kPa 7.2 psi 49,9 kPa 7.5 psi 51,5 kPa66/43-25 or 26..............................4.7 psi 32,1 kPa 5.5 psi 37,6 kPa 5.8 psi 39,6 kPa 6.1 psi 42,1 kPa 6.3 psi 43,5 kPa68/50-32....................................... ..........................................................................4.4 psi 30,1 kPa 4.6 psi 31,6 kPa 4.9 psi 33,4 kPa 5.0 psi 34,4 kPa

Capacities (U.S.)

Fuel tank..............................................50 gal 189 L single function dual function 72 gal 272,5 L73 gal 276,3 L 72 gal 272,5 L

Cooling system ....................................30 qt 24,6 L 30 qt 28,4 L 30 qt 28,4 LEngine lubrication, including filter ........20 qt 18,9 L 20 qt 18,9 L 25 qt 23,7 LTransmission........................................7.75 gal 29,3 L 7.75 gal 29,3 L 7.75 gal 29,3 LDifferentials

Front..............................................4.5 gal 17 L 4.5 gal 17 L 7.5 gal 28,4 LRear ..............................................4.5 gal 17 L 7.5 gal 28,4 L 7.5 gal 28,4 L

Winch ..................................................9.3 gal 35,2 L 9.3 gal 35,2 L 12 gal 45,4 LHydraulic reservoir...............................8 gal 30,3 L 11 gal 41,6 L 11 gal 41,6 L

Operating Weights

single function single function dual function single function dual functionStandard equipment ............................23,690 lb 30,245 lb 33,400 lb 33,335 lb 34,309 lb

10 768 kg 13 478 kg 15 182 kg 15 152 kg 15 595 kg(30.5 x 32 tires)

Operator’s Station

Accessory power ports (2), 12-volt/15-amp fuse

Beverage holder

Cab hydraulic tilt for service

Canopy with tinted polycarbonate front windows and screens on all other openings /Heater, 40,000 Btu/hr 11.8 kW

Cell-phone storage compartment and power port in right-hand armrest

Deluxe interior trim package

Dome light

Door storage bins

Fire extinguisher, 5 lb

Floormat

Foot throttle

Full Function Monitor Instrumentation: Illuminated Gauges: Fuel level, Engine CoolantTemperature, Transmission Oil Temperature; Audible Warning Alarm for: TransmissionOil Temperature High, Engine Coolant High, Engine Oil Pressure Low, Hydraulic Oil Temperature High; Indicator lights for: Check Service Code, Engine Air FilterRestriction, Transmission Oil Filter Restriction, Hydraulic Oil Filter Restriction, EngineOil Pressure, Differential Lock, Engine Alternator Volts, Fasten Seat Belt/Park Brake; andSelectable digital readout for: Hourmeter, Gear Selection, Battery Voltage, Engine PRM,Hydraulic Oil Temperature, Transmission and Engine fault codes

Full heating and ventilation ducting

Front wiper with washer

Lockable doors with start switch key

Meets noise regulation: SAE J1166 (OSHA and BC)

Mirror, interior rearview

Operator manual with storage compartment

Operator protection withtegral ROPS, FOPS, and OPS structure

Seat belt, 2-in 51 mm retractable

Sunscreen (front and rear)

Sunvisor (front)

Swivel seat with 15-, 22.5-, and 30-degree positions

Tilt-telescopic steering wheel with spinner knob

Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weightadjustment / Adjustable backrest angle / Armrests, two position

Optional Features

ENGINE

Electric ether starting aid

ELECTRICAL

Alternator, 95 amp

Alternator, 120 amp

Work lights (halogen, 2 front, 2 rear)


TRANSMISSION

Power shift with torque converter with six forward and six reverse speeds (460D only)

Transmission disconnect, for cold weather starting (460D and 560D only)

OPERATOR’S STATION

Cab, fully enclosed, with polycarbonate windows on all openings with screens on the door windows only; also includes: Air conditioner, R134a refrigerant / Heater,40,000 Btu/hr 11,8 kW / Pressurizer


Hand throttle

Rear wiper with washer

Seat belt, 3-in 76 mm, anti-cinch retractable

Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjust-ment / Adjustable backrest angle / Armrests, two position

Fabric cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjust-ment / Adjustable backrest angle / Armrests, two position

Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weightadjustment / Adjustable backrest angle / Armrests, two position

AM/FM stereo sound system

AM/FM cassette stereo sound system

Cab fresh-air precleaner

Window glazing kit (canopy to cab field conversion)*

AXLES

1400 HD SWEDA (460D and 560D only)

TIRES

23.1-26, 14 ply rating, narrow gauge (360D only)

28L-26, 12 ply rating (360D only)

28L-26, 12 ply rating, narrow gauge (360D and 460D only)

28L-26, 14 ply rating (360D only)

24.5-32, 12 ply rating, narrow gauge (360D and 460D only)

24.5-32, 16 ply rating (360D and 460D only)

30.5-32, 16 ply rating

30.5-32 and 24.5-32, 16 ply rating - Duals (460D and 560D only)

HYDRAULIC SYSTEM

Single-lever “pilot” grapple control (optional on single- and dual-function grapples)

Optional Features (continued)

GRAPPLE

Dual function with 115-in tong opening (460D only)

Dual function with 123-in tong opening (460D and 560D only)

Dual function with 127-in tong opening (560D only)

WINCH

Model 4000 (8-in drum high speed) (360D and 460D only)

Model 4000 (8-in drum standard speed) (360D and 460D only)

Model 4000 (10-in drum high speed) (360D and 460D only)

Model 6000 (11-in drum) (560D only)

16/17

T I M B E R J A C K

C A B L E S K I D D E R S

360 D 460 DTechnical Data

Engine 360 D 460 D

Type ...................................................................John Deere 6068T, emission compliant, with altitude- John Deere 6068H, emission compliant, with altitude-compensating, spark-arresting turbocharger compensating, spark-arresting turbocharger

Rated power @ 2,200 rpm.................................129 SAE gross hp 96 kW 168 SAE gross hp 125 kWWith torque-converter option ................................................................................................................................181 SAE gross hp 135 kW

Peak power ........................................................117 SAE net hp 87 kW 160 SAE net hp 119 kWWith torque-converter option ................................................................................................................................171 SAE net hp 128 kW

Cylinders ............................................................6 6Displacement .....................................................414 cu-in 6,8 L 414 cu-in 6,8 LMaximum net torque..........................................32% @ 1,400 rpm / 383 lb-ft 522 Nm 30% @ 1,400 rpm / 494 lb-ft 670 Nm

With torque-converter option ................................................................................................................................28% @ 1,400 rpm / 529 lb-ft 717 NmFuel consumption, typical...................................2.3 to 3.5 gal/hr 8,8 to 13,4 L/h 3.3 to 5.1 gal/hr 12,6 to 19,3 L/h

With torque-converter option ................................................................................................................................3.6 to 5.4 gal/hr 13,6 to 20,4 L/hAir cleaner..........................................................dual stage with safety element and dust unloader valve dual stage with safety element and dust unloader valveCooling system...................................................heavy-duty radiator with in-line core coolant recovery reservoir heavy-duty radiator with in-line core coolant recovery reservoirCooling fan.........................................................blower blowerLubrication .........................................................pressure system with oil cooler pressure system with oil coolerOil filter ..............................................................vertically mounted spin-on vertically mounted spin-onElectrical system................................................12 volt with 65-amp alternator 12 volt with 65-amp alternatorBattery (two 12 volt)...........................................reserve capacity: 360 min, 1,850 CCA reserve capacity: 360 min, 1,850 CCA

Transmission 360 D /460 D

Type ...................................................................direct-drive power shift*Oil filtration ........................................................10 micron pressure side with bypass*Power shift with torque converter optional on 460D only

Axles

Final drives.........................................................heavy-duty planetary, mounted inboardDifferentials........................................................hydraulic locking, operated on the goFront axle oscillation ..........................................30 degrees, stop to stop

Brakes

Service brakes ...................................................long-life, inboard-mounted wet disc oil cooled, self-adjusting and self-equalizing front and rear axlesParking brake.....................................................automatically spring-applied, hydraulically released, sealed and lubricated, wet multi-disc, integrally mounted in transmission

Steering

Frame articulation ..............................................90 degrees total, stop to stopSteering wheel with Orbitrol™ valve

Hydraulic System

Pump .................................................................variable-displacement axial pistonMaximum rated flow....................................27 gpm 102 L/min @ 2,200 rpmPressure ......................................................3,000 psi 20 684 kPa

Oil filtration ........................................................one 10 micron return oil with bypass

™Orbitrol is a registered trade mark of Eaton Corp.

Power Train Performance 360 D 460 D

with 28L-26 tires with 30.5-32 tiresNo tire slip .........................................................maximum speed maximum drawbar maximum speed maximum drawbar

@ 2,200 rpm @ peak torque @ 2,200 rpm @ peak torqueForward

Gear 1 ........................................................1.5 mph 2,4 km/hr 32,745 lbs 146 kN 1.7 mph 2,7 km/hr 37,645 lbs 167 kNGear 2 ........................................................2.0 mph 3,2 km/hr 24,672 lbs 110 kN 2.3 mph 3,7 km/hr 28,364 lbs 126 kNGear 3 ........................................................2.6 mph 4,2 km/hr 18,535 lbs 82 kN 3 mph 4,8 km/hr 21,309 lbs 95 kNGear 4 ........................................................3.5 mph 5,6 km/hr 13,963 lbs 62 kN 4 mph 6,4 km/hr 16,052 lbs 71 kNGear 5 ........................................................4.6 mph 7,4 km/hr 10,462 lbs 47 kN 5.4 mph 8,7 km/hr 12,028 lbs 54 kNGear 6 ........................................................6.1 mph 9,8 km/hr 7,867 lbs 35 kN 7.2 mph 11,6 km/hr 9,044 lbs 40 kNGear 7 ........................................................9.1 mph 14,7 km/hr 5,313 lbs 24 kN 10.7 mph 17,2 km/hr 6,108 lbs 27 kNGear 8 ........................................................12.1 mph 19,5 km/hr 3,987 lbs 18 kN 14.1 mph 22,7 km/hr 4,584 lbs 20 kN

ReverseGear 1 ........................................................1.5 mph 2,4 km/hr 32,745 lbs 146 kN 1.7 mph 2,7 km/hr 37,645 lbs 167 kNGear 2 ........................................................2.0 mph 3,2 km/hr 24,672 lbs 110 kN 2.3 mph 3,7 km/hr 28,364 lbs 126 kNGear 3 ........................................................2.6 mph 4,2 km/hr 18,535 lbs 82 kN 3 mph 4,8 km/hr 21,309 lbs 95 kNGear 4 ........................................................3.5 mph 5,6 km/hr 13,963 lbs 62 kN 4 mph 6,4 km/hr 16,052 lbs 71 kNGear 5 ........................................................4.6 mph 7,4 km/hr 10,462 lbs 47 kN 5.4 mph 8,7 km/hr 12,028 lbs 54 kNGear 6 ........................................................6.1 mph 9,8 km/hr 7,867 lbs 35 kN 7.2 mph 11,6 km/hr 9,044 lbs 40 kNGear 7 ........................................................9.1 mph 14,7 km/hr 5,313 lbs 24 kN 10.7 mph 17,2 km/hr 6,108 lbs 27,2 kN

Winch

Type ...................................................................sealed, wet multi-disc clutch and brake sealed, wet multi-disc clutch and brakepressurized lubrication pressurized lubricationsingle lever control single lever control

Cable capacity........................................................4000 (8-in drum) 4000 (10-in drum) 4000 (8-in drum) 4000 (10-in drum) 6000 (11-in drum)0.625-in 15,8 mm cable ..............................254-ft 77,4 m 199-ft 60,6 m 254-ft 77,4 m 199-ft 60,6 m 373-ft 114,0 m0.75-in 19,1 mm cable ................................179-ft 54,6 m 141-ft 43 m 179-ft 54,6 m 141-ft 43,0 m 263-ft 80,2 m0.875-in 22,2 mm cable ..............................129-ft 39,3 m 101-ft 30,8 m 129-ft 39,3 m 101-ft 30,8 m 189-ft 58,0 m1-in 25,4 mm cable .....................................100-ft 30,5 m 78-ft 23,8 m 100-ft 30,5 m 78-ft 23,8 m 147-ft 45,0 m

Linepull @ peak engine,0.625-in 15,8 mm cable bare drum full drum bare drum full drum

4000 (8-in drum high speed) .......................31,726 lb 141 kN 19,036 lb 85 kN 40,942 lb 182 kN 24,565 lb 109 kN4000 (8-in drum standard speed) ................36,960 lb 164 kN 22,176 lb 99 kN 47,697 lb 212 kN 28,618 lb 127 kN4000 (10-in drum high speed) .....................30,003 lb 133 kN 22,176 lb 99 kN 38,719 lb 172 kN 28,618 lb 127 kN6000 (11-in drum high speed) .............................................................................................................................45,357 lb 203 kN 28,307 lb 126 kN

Line speed @ 2,200 rpm,0.625-in 15,8 mm cable bare drum full drum bare drum full drum

4000 (8-in drum high speed) .......................142 fpm 236 fpm 142 fpm 236 fpm43,2 m/min 72,0 m/min 43,2 m/min 72,0 m/min

4000 (8-in drum standard speed) ................122 fpm 203 fpm 122 fpm 203 fpm37,1 m/min 61,8 m/min 37,1 m/min 61,8 m/min

4000 (10-in drum high speed) .....................150 fpm 203 fpm 150 fpm 203 fpm45,7 m/min 61,8 m/min 45,7 m/min 61,8 m/min

6000 (11-in drum high speed) ..............................................................................................................................128 fpm 205 fpm39,0 m/min 62,5 m/min

18/19

T I M B E R J A C K



Ground Pressure Data 360 D 460 D

Tires23.1-26 .......................................................7.4 psi 50,7 kPa 8.0 psi 55,3 kPa28L-26 ........................................................6.2 psi 42,5 kPa 6.7 psi 46,2 kPa24.5-32 .......................................................6.7 psi 46,0 kPa 7.2 psi 49,9 kPa30.5-32 .......................................................5.6 psi 38,4 kPa 6.4 psi 44,0 kPa67/34-25 or 26............................................5.6 psi 38,3 kPa 6.4 psi 43,9 kPa66/43-25 or 26............................................4.7 psi 32,3 kPa 5.7 psi 39,1 kPa68/50-32..............................................................................................................................................................4.5 psi 31,2 kPa

Capacities (U.S.)

Fuel tank............................................................42.0 gal 159,0 L 42.0 gal 159,0 LCooling system...................................................30.0 qt 24,6 L 30.0 qt 28,4 LEngine lubrication, including filter.......................20.0 qt 18,9 L 20.0 qt 18,9 LTransmission......................................................7.8 gal 29,3 L 7.8 gal 29,3 LDifferentials

Front ............................................................4.5 gal 17,0 L 4.5 gal 17,0 LRear.............................................................4.5 gal 17,0 L 7.5 gal 28,4 L

Winch.................................................................9.3 gal 35,2 L 9.3 gal 35,2 LHydraulic reservoir .............................................8.0 gal 30,3 L 11.0 gal 41,6 L

Operating Weights

Standard equipment...........................................22,780 lb 10 355 kg (23.1 x 26 tires) 30,025 lb 13 648 kg (30.5 x 32 tires)


23.1-26 28L-26 24.5-32Tire size ...............................................23.1-26 28L-26 24.5-32 (narrow gauge) (narrow gauge) (narrow gauge)

I Ground clearance.........................19.6-in 498 mm 20.2-in 514 mm 23.5-in 598 mm 19.6-in 498 mm 20.2-in 514 mm 23.5-in 598 mmJ Wheel tread ....................................7-ft 3-in 2,21 m 7-ft 6-in 2,29 m 7-ft 9.5-in 2,38 m 6-ft 9-in 2,06 m 7-ft 2-in 2,18 m 7-ft 0.5-in 2,15 mK Overall width................................9-ft 2-in 2,79 m 9-ft 10-in 3,00 m 9-ft 10-in 3,00 m 8-ft 8-in 2,64 m 9-ft 6-in 2,90 m 9-ft 1-in 2,77 m

Turning radius over tires ..............17-ft 11-in 5,47 m 18-ft 1-in 5,51 m 18-ft 0-in 5,48 m 17-ft 6-in 5,33 m 17-ft 11-in 5,50 m 17-ft 7-in 5,36 m


23.1-26 28L-26 24.5-32Tire size ...............................................23.1-26 28L-26 24.5-32 30.5-32 (narrow gauge) (narrow gauge) (narrow gauge)

I Ground clearance ..........................19.6-in 20.2-in 23.5-in 24.2-in 19.6-in 20.2-in 23.5-in498 mm 514 mm 598 mm 615 mm 498 mm 514 mm 598 mm

J Wheel tread ...................................7-ft 3-in 7-ft 6-in 7-ft 9.5-in 7-ft 8.5-in 6-ft 9-in 7-ft 2-in 7-ft 0.5-in2,21 m 2,28 m 2,38 m 2,35 m 2,06 m 2,18 m 2,15 m

K Overall width .................................9-ft 2-in 9-ft 10-in 9-ft 10-in 10-ft 3-in 8-ft 8-in 9-ft 6-in 9-ft 1-in2,79 m 3,00 m 3,00 m 3,12 m 2,64 m 2,90 m 2,77 m

Turning radius over tires ................18-ft 3-in 18-ft 7-in 18-ft 7-in 18-ft 9-in 17-ft 11-in 18-ft 4-in 18-ft 2-in5,50 m 5,60 m 5,60 m 5,70 m 5,40 m 5,60 m 5,50 m

20/21

Dimensions 360 D 460 D

Tire size 28L-26 28L-26

A Overall height*..................9-ft 10.5-in 9-ft 11.0-in 3,01 m 3,03 m

B Maximum blade lift above ground....................3-ft 11.6-in 4-ft 3.5-in

1,21 m 1,31 m

C Maximum blade dig below ground ..................11.3-in 14.5-in

288 mm 367 mm

D Front axle to front of machine ......................4-ft 11.3-in 5-ft 6.3-in

1 507 mm 1 685 mm

E Front axle to blade cutting edge arc ..............6-ft 11.2-in 7-ft 6.2-in

2 112 mm 2 292 mm

F Front axle to articulation joint................5-ft 2-in 5-ft 8-in

1 575 mm 1 727 mm

G Wheelbase........................9-ft 7-in 11-ft 3-in 2 920 mm 3 430 mm

H Overall length ..................20-ft 9.0-in 23-ft 8.6-in 6 330 mm 7 230 mm

*Add 6.3-in 160 mm when equipped with water tank

Timberjack 360 D / 460 D Cable Skidders

T I M B E R J A C K



Operator’s Station

Accessory power ports (2), 12-volt/15-amp fuse

Beverage holder

Cab hydraulic tilt for service

Canopy with tinted polycarbonate front windows and screens on all other openings /Heater, 40,000 Btu/hr 11,8 kW

Cell-phone storage compartment and power port

in right-hand armrest

Deluxe interior trim package

Dome light

Door storage bins


Floormat

Foot throttle

Front wiper with washer

Full Function Monitor Instrumentation: Illuminated Gauges: Fuel level, Engine CoolantTemperature, Transmission Oil Temperature; Audible Warning Alarm for: Transmission Oil Temperature High, Engine Coolant High, Engine Oil Pressure Low, Hydraulic OilTemperature High; Indicator lights for: Check Service Code, Engine Air Filter Restriction,Transmission Oil Filter Restriction, Hydraulic Oil Filter Restriction, Engine Oil Pressure,Differential Lock, Engine Alternator Volts, Fasten Seat Belt/Park Brake; and Selectable digital readout for: Hourmeter, Gear Selection, Battery Voltage, Engine PRM, Hydraulic Oil Temperature, Transmission and Engine fault codes

Full heating and ventilation ducting

Lockable doors with start switch key

Meets noise regulation: SAE J1166 (OSHA and BC)

Mirror, interior rearview

Operator manual with storage compartment

Operator protection with integral ROPS, FOPS, and OPS structure

Seat belt, 2-in 51 mm retractable

Sunscreen (front and rear)

Sunvisor (front)

Swivel seat with 15-, 22.5-, and 30-degree positions

Tilt-telescopic steering wheel with spinner knob

Vinyl cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weightadjustment / Adjustable backrest angle / Armrests, two position

Optional Features

ENGINE

Electric ether starting aid

ELECTRICAL

Alternator, 95 amp

Alternator, 120 amp



TRANSMISSION

Power shift with torque converter with six forward and six reverse speeds (460D only)

Transmission disconnect, for cold weather starting (460D only)

OPERATOR’S STATION

Cab, fully enclosed, with polycarbonate windows on all openings with screens on thedoor windows only; also includes: Air conditioner, R134a refrigerant / Heater, 40,000Btu/hr 11,8 kW / Pressurizer


Hand throttle

Rear wiper with washer

Seat belt, 3-in 76 mm, anti-cinch retractable

Vinyl cushion/air suspension seat with: Fore/aft adjustment / Height, weight adjust-ment / Adjustable backrest angle / Armrests, two position

Fabric cushion/air suspension seat with: Fore/ aft adjustment / Height, weight adjust-ment / Adjustable backrest angle / Armrests, two position

Fabric cushion/mechanical suspension seat with: Fore/aft adjustment / Height, weightadjustment / Adjustable backrest angle / Armrests, two position

AM/FM stereo sound system

AM/FM cassette stereo sound system

Premium AM/FM//CD stereo sound system (field installed)*

Cab fresh-air precleaner

Window glazing kit (canopy to cab field conversion)*

TIRES

23.1-26, 14 ply rating, narrow gauge

28L-26, 12 ply rating

28L-26, 12 ply rating, narrow gauge

28L-26, 14 ply rating

24.5-32, 16 ply rating

30.5-32, 16 ply rating (460D only)

WINCH

Model 4000 (8-in drum high speed)

Model 4000 (10-in drum high speed)

Model 6000 (11-in drum) (460D only)

FRAMEStacking blade extensions, 15-in 381 mm per side

22/23Note - These specifications are based on units with 23.1-26, 12 PR tires

Timberjack’s fix-before-fail strategy on

machine maintenance helps control costs,

increase profits, and reduce stress. Included

in this comprehensive lineup of on–going

programs and services are:

Extended Coverage gives you a fixed cost

for maintaining a machine for a given period

of time so you can effectively manage costs.

Whether you work in a severe-service setting

or just want to spread the risk of doing business,

this is a great way to custom-fit coverage for

your operation.

Planned Maintenance agreements give you

a fixed cost for maintaining a machine for

a given period of time. They also help you

avoid downtime by ensuring that critical

maintenance work gets done right and on

schedule. On-site preventive maintenance

service performed where and when you need

it helps protect you from the expense of

catastrophic failures and lets you avoid

waste-disposal hassles.

Fluid Analysis tells you what’s going on

inside all of your machine’s major components

so you’ll know if there’s a problem before you

see a decline in performance. Fluid analysis is

included in most Extended Coverage warranty

and preventive-maintenance agreements.

Finance Programs offer a full menu of

customized business solutions to meet all

your cash flow needs, including a revolving

charge account that’s ideal for handling your

month-in and month-out expenses. Skip

payments are available to accommodate

seasonal cash flows.

Component life-cycle gives you vital

information on the projected life span of

components and lets you make informed

decisions on machine maintenance by

telling you approximately how many

hours of use you can expect from an

engine, transmission, or hydraulic pump.

This information can be used to preempt

catastrophic downtime by servicing major

components at about 80 percent of their

life cycle.

Certified Customer Support Advisors

and Service Technicians are certified to

have the knowledge and skills to help

make important decisions on machine

maintenance and repair. They will help

you customize a plan that meets your

specific needs.

The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation tomake such changes on machines manufactured previously.E. & O.E. 10M

Photos may show features or options not available in all markets.

TM Timberjack, the donkey symbol, and TMC are trade marks ofTimberjack Inc.

Control Owning and Operating Costs

DKA360DTJ

www.timberjack.com

Timberjack is more than just advanced technology, backed by 165 years of Deere experience. It is also a collection of many dedicated people around the world who areequipped with the specialized knowledge and skills to make your professional logging businessflourish. Our local dealers are familiar with yourparticular environment and are ready to help youget the best out of your machines. Their first-classtraining, maintenance and spare part servicesensure that your Timberjack forest machinesremain productive and profitable years and yearsafter initial delivery.

P A R T N E R S H I P

timberjack skidders 360d 460d 560d - · pdf filedifferential locks can’t be beat. in...

Documents