training programme guide
TRANSCRIPT
-
7/29/2019 Training Programme Guide
1/46
Automotive Equipment
Training Programme 2012
-
7/29/2019 Training Programme Guide
2/46
At Bosch Training Centre 04
Courses on Diesel Fuel Injection Equipment 04
Course on Auto Electrical 06
Seminar for OE Customers 06
Courses for Institutional Customers 06
Courses on Workshop & Test Equipment 08
Course on Bosch Wheel Aligner 08
Course on Bosch Wheel Balancer, Tyre Changer and Nitrogen Tyre Inflator 09
Course on Bosch Air Conditioning Machine 09
Course on Vehicle Maintenance & Systems 09
Specialised Courses on Systems 10
Course for Bosch System Technicians 10
Courses for Sales/Service Personnel 10
Courses for Educational Institutes 11
Course for Trainers 11
Course for Students 11
Course for New Entrants (AA) 11
Course for Employees from Bosch Group (India) 11
At Regional/ Local Training Centres 12
Courses on Diesel Fuel Injection 12
Course on Gasoline Fuel Injection 14Course on Auto Electrical 14
Courses on Bosch Battery 14
Seminars Techno-commercial 15
Courses for State Transport Undertakings 17
Courses for Sales Personnel 18
Course on 2-Wheeler Products 18
Courses on Workshop & Test Equipment 19
Course for Defence Personnel 19
Course for OE Customers 19
Courses for Students and Lecturers 20
Courses for Bosch Car Service (BCS) 21
Training Centres 27
Accommodation/ Transport Details
Bangalore 28
North Region 29
South Region 33
East Region 37
West Region 40
Eligibility and Enrolment Procedure 43
Contents
-
7/29/2019 Training Programme Guide
3/46
03
Dear Business Partner,
Just a few years ago, in order to accelerate and sustain the growth in the automobile sector in India, the Ministry of Heavy
Industries in consultation with the industry, planners, academia, state and central authorities, prepared a comprehensive document
titled "Automotive Mission Plan 2006-2016". Herein, it lay down a blueprint for the development of the automotive industry, with
a vision to make India a global automotive hub. In its assessment of the situation, it also clearly identified the challenges as well
as the opportunities that faced India. One of the key topics that was put forth as an area of focus was "availability of trainedmanpower". This would not only aid in the growth of the sector, but also facilitate in achieving the employment goals.
Today, the Indian automotive industry is in a very enviable position it has emerged as the world's fastest growing passenger
car market, the largest manufacturer of tractors and 3-wheelers, the second largest 2-wheelers manufacturer and the 4th largest
producer of commercial vehicles. The OE landscape is dotted with Indian and global manufacturers, spread across the length and
breadth of the country. Joint ventures, mergers and acquisitions are the trend, with players wanting to gain access to new markets
and new technologies.
The Indian auto component sector too is witnessing robust growth rates the prime driver being cost advantage of Indian
manufacturing. Increased component localisation for Indian OEMs and component outsourcing for global vehicle manufacturers
bode well for India. The vehicle parts is geographically dispersed and complex with the co-existence of three generations
of systems! Labour cost being relatively low in India, it continues to be a repair market. All these factors create a conducive
environment for companies like Bosch to leverage on its unique strengths: Parts+Bytes+Services strategy.
At Bosch, we believe in "investing" in training; globally, we train about 70,000 people each year. In the AA world, India ismaintaining a leading position in terms of the number of participants trained each year. In order to develop competent manpower,
it is imperative to make training accessible, relevant and effective. We have achieved this objective through various measures:
f Continuous upgrade & introduction of newer course modules to meet business requirement
f Collaborations with channel partners and government bodies to expand training infrastructure
f Joint certification at educational institutes and universities through curriculum development
f Making training an integral part of our service concept to upgrade the skill levels of technicians
f Customised programmes to address specific needs Bosch System Technician (BST), Service Promoter, Select Train Employ &
Perform (STEP), Sales Force Academy programme for Field Representatives.
We have thus gone beyond the obvious and used Training as an important tool to enable the entire value chain, thereby securing
our market leadership and our future success.
I am confident that you will find useful courses/ modules in our Training Calendar 2012. We look forward to welcoming you to our
'gurukul' soon.
Let's together build competence for today and tomorrow.
Yours sincerely,
S. Muralidharan T.S. Ananda Kumar
Vice President General Manager
Automotive Aftermarket Technical Service & Support
Automotive Aftermarket
S. Muralidharan T.S. Ananda Kumar
-
7/29/2019 Training Programme Guide
4/46
04
Courses Bosch Training Centre
Courses on Diesel Fuel Injection Equipment
Course Code: EP - X
Duration: Ten days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment with more hands-on training.
Participants: Fuel Injection Equipment Service Personnel, preferably Bosch AuthorisedRepresentatives.
Course Content: Working Principle, Repair and Testing of PE...A-type Multi-cylinder Fuel InjectionPump with RSV and RQV Governors, VE Distributor-type Fuel Injection Pump, Add-onModules fitted on PE and VE Pumps, Injector, Injection Timer, Feed Pump and Filters,Injection Timing Setting on Diesel Engine, Safety and Housekeeping, Maintenanceand Upkeep of Service Literature.
Place: BTC (Naganathapura, Bangalore) (On request).
Course Code: EP - 4
Duration: Three days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment.
Participants: Fuel Injection Equipment Service Personnel, preferably Bosch AuthorisedRepresentatives, Engineers/ Technicians from OEMs.
Course Content: Working Principle, Repair and Testing of VE Distributor-type Fuel Injection Pumpwith and without Manifold Pressure Compensator (LDA), Add-on Modules, Injectors,Filter and Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and
Housekeeping, Maintenance and Upkeep of Service Literature.
Place: BTC (Naganathapura, Bangalore).
Course Code: EP - P
Duration: Three days.
Objective: To make participants competent with Heavy-Duty Test Bench to carry out qualityservice on Diesel Fuel Injection Equipment.
Participants: Fuel Injection Equipment Service Personnel of Bosch Authorised Representativesequipped with Heavy-Duty Test Bench.
Course Content: Working Principle, Repair and Testing of Bosch PE...P Fuel Injection Pump and RQV-K
Governor, Bosch EDC Governor fitted on PE...P Fuel Injection Pumps, Safety andHousekeeping, Maintenance and Upkeep of Service Literature.
Place: BTC (Naganathapura, Bangalore).
-
7/29/2019 Training Programme Guide
5/46
05
Course Code: EDC - 1
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Bosch VE FuelInjection Pumps with Electronic Diesel control (VP-37).
Participants: Personnel servicing Fuel Injection Equipment.Course Content: Working Principle, Repair, Testing and Adjustment of Bosch VE Fuel Injection
Pumps (VP 37), Safety and Housekeeping, Maintenance and Upkeepof Service Literature.
Place: BTC (Naganathapura, Bangalore).
Course Code: EDC - 2
Duration: Two days.
Objective: To make participants competent in carrying out quality service on BoschVP-44 Fuel Injection Pumps.
Participants: Personnel servicing Fuel Injection Equipment, preferably from Bosch Authorised
Representatives.
Course Content: Working Principle, Repair, Testing and Adjustment of Bosch VP-44 Fuel InjectionPumps on EPS 815 Test Bench, Safety and Housekeeping, Maintenance and Upkeepof Service Literature.
Place: BTC (Naganathapura, Bangalore).
Course Code: CR - 1
Duration: Three days.
Objective: To make participants competent in carrying out quality service on Common RailHigh-pressure Pumps and Injectors.
Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experiencein handling all types of existing fuel injection systems.
Course Content: Structure, Function of Common Rail High-pressure Pumps and Injectors (CP1K, CP1H& CRI), Characteristics, Testing on the Pump Test Bench EPS 815 with KMAMeasuring technique and Testing of Common Rail Injectors.
Place: BTC (Naganathapura, Bangalore).
Course Code: CR - 2
Duration: Three days.
Objective: To make participants competent in carrying out quality service on Common RailHigh-pressure Pumps and Injectors.
Participants: Technicians from BDS and OEMs equipped with EPS 815 and having experiencein handling all types of existing fuel injection systems.
Course Content: Structure, Function of Common Rail High-pressure Pumps and Injectors (CP3,CPN2.2, CB18 & CRIN), Characteristics, Testing on the Pump Test Bench EPS 815with KMA Measuring technique and Testing of Common Rail Injectors.
Place: BTC (Naganathapura, Bangalore).
Course Code: EPS
Duration: Two days.
Objective: The participants will be able to operate the EPS 815 Test Bench using theSoftware EPS 945/ 944.
Participants: New staff, existing and potential EPS 815 users. Personnel who have good experienceon handling all types of fuel injection pump and governors.
-
7/29/2019 Training Programme Guide
6/46
06
Course Content: Operation of Test Bench EPS 815 with KMA measuring technique.
f Programming of test protocol adjustment steps.
f Importing/exporting data.
f Inline and Distributor Pump test equipment fitment.
f Basic pump adjustment.
f Vehicle Diagnosis (Diesel vehicle)
Place: BTC (Naganathapura, Bangalore).
Course on Auto ElectricalCourse Code: AEL - 2
Duration: Three days.
Objective: To make participants competent in carrying out quality service on Bosch AutoElectrical Products and Test Equipment.
Participants: Personnel handling Auto Electrical Equipment at Bosch Authorised Stockists/Distributors/ Workshops.
Course Content: Working Principle, Repair and Testing of Bosch Auto Electrical Products andRespective Test Equipment.
Place: BTC (Naganathapura, Bangalore) (On request).
Seminar for OE CustomersCourse Code: OES
Duration: Three days.
Objective: To provide knowledge on Bosch Products and to inform participants about the latestdevelopments in Bosch Products.
Participants: Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles.
Course Content: Design, Working Principle, Test Procedures of Bosch Fuel Injection and AutoElectrical Equipment, Interaction with Bosch R&D, Quality and Service Departments.
Place: BTC (Naganathapura, Bangalore).
Courses for Institutional CustomersCourse Code: RLY
Duration: Two days.
Objective: To make participants competent in carrying outquality service onFuel Injection Equipment.
Participants: Fuel Injection Equipment Service Personnel ofRailways.
Course Content: Working Principle, Repair and Testing ofPF-type Fuel Injection Pumps and Injectors usedby Indian Railways, Safety and Housekeeping,Maintenance and Upkeep of Service Literature.
Place: BTC (Naganathapura, Bangalore)
-
7/29/2019 Training Programme Guide
7/46
07
Course Code: DEF - 2
Duration: Three days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment.
Participants: Fuel Injection Equipment Service Personnel from Defence having minimum two yearsof on-the-job experience.
Course Content: Working Principle, Repair and Testing of PE...A Multi-cylinder Fuel Injection Pumpwith RSV and RQV Governors, Manifold Pressure Compensator fitted on PE Pumps,Injection Timing Lock on PE Pumps, Injectors, Injection Timers, Filters and FeedPump, Injection Timing Setting on Diesel Engine, Working Principle, Repair andTesting of Distributor Type, Fuel Injection Pump Type VE with and without ManifoldPressure Compensator (LDA), Add-on Modules, Injection Timing Setting on DieselEngine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep ofService Literature.
Place: BTC (Naganathapura, Bangalore).
-
7/29/2019 Training Programme Guide
8/46
08
Courses on Workshop & Test EquipmentCourse Code: WTE - 2
Duration: Three days.
Objective: To help participants in carrying out Maintenance, Troubleshooting and Minor Repairsof Bosch Authorised Workshop and Test Equipment.
Participants: Personnel looking after the maintenance of Bosch Authorised Workshop and TestEquipment, TMSS.
Course Content: Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and MinorRepairs of Auto Electrical and FIE Test Benches, BAT 121, Battery Load Testers,Battery Chargers, Tyre Changers, Wheel Balancers, ACS and all other diagnosticproducts of Bosch.
Place: BTC (Naganathapura, Bangalore) (On request).
Course Code: MRS
Duration: Four days.
Objective: To help participants in carrying out AMC Activities, Troubleshooting and MinorRepairs of Bosch Authorised Workshop and Test Equipment.
Participants: Missionary Representatives looking after maintenance of Bosch Authorised Workshopand Test Equipment.
Course Content: AMC Activity, Operating Instructions, Maintenance, Troubleshooting Guidelines,Service and Minor Repairs of Auto Electrical and FIE Test Benches, ASC Equipment,BAT 121, Battery Chargers, Battery Load Testers, Tyre Changers, Wheel Aligners andother workshop equipment.
Place: BTC (Naganathapura, Bangalore).
Course on Bosch Wheel AlignerCourse Code: WA
Duration: One day.
Objective: To make participants competent enough in carrying outquality service using Bosch wheel aligner.
Particpants: PSDG, BTS, Wheel Aligner end customer
1. Fundamentals of Steering Geometry
2. Five basic alignment angles
3. Wheel alignment specifications.Steering axis inclination
4. Maintenance tips: Steering system, suspension etc.
5. Product feature & operating principle of Bosch Wheel Aligner
6. Training on wheel alignment software
7. Practical on Wheel Alignment using Bosch Wheel Aligner
8. Wheel Aligner Maintenance tips, Dos & Donts
Place: BTC (Naganathapura, Bangalore) and RTCs (On request)
-
7/29/2019 Training Programme Guide
9/46
09
Course on Bosch Wheel Balancer, Tyre Changer andNitrogen Tyre Inflator
Course Code: WB, TC, NTI
Duration: One day.
Objective: To make participants competent enough in carrying out quality Service using BoschWheel Balancer, Tyre Changer & Nitrogen Tyre Inflator.
Particpants: PSDG, BTS, End customer
Course Content: 1. Basics of tyre ( Construction, terminology )
2. Different types of tyres
3. Operating principle of Wheel Balancer, Tyre Changer, NTI & Knowledge onnitrogen
4. Effects of unbalanced wheel on steering system
5. User training on balancing the different types of wheels
6. User training on Tyre Changer, precautions to be followed while changing thetyres
7. User training on NTI 100
8. Maintenance tips, Dos & Donts: Wheel Balancer, Tyre Changer & NTI 100
Place: BTC (Naganathapura, Bangalore) and RTCs (On request).
Course on Bosch Air Conditioning Machine
Course Code: ACS
Duration: One day.
Objective: To make participants competent enough in carrying out quality service using BoschACS 600, ACS650 machine.
Particpants: PSDG, BTS, End customer.
Course Content: 1. Basic working principle of car A/C system
2. Different A/C gases and its features
2. Knowledge on car A/C components system
3. Operating principal of Bosch ACS 6xx
4. User training on ACS 6xx5. Maintenance tips, Dos & Donts: ACS 6xx
6. Maintenance tips on vehicle A/C system.
Place: BTC (Naganathapura, Bangalore) and RTCs (On request).
Course on Vehicle Maintenance & SystemsCourse Code: VMS
Duration: Five days.
Objective: To make the participants competent in carrying out quality service on Bosch Productsfitted in vehicles.
Participants: Personnel at BCS Bosch Authorised Stockists/ Distributors/ Workshops offeringVehicle Service.
-
7/29/2019 Training Programme Guide
10/46
10
Course Content: Practicals on Removal and Fitment of Bosch Products on the Vehicles, using Test
Equipment for Diagnosis and General Service and Maintenance Aspects.
Place: BTC (Naganathapura, Bangalore) (On request).
Specialised Courses on SystemsCourse Code: GFI - 2
Duration: Two days.
Objective: To educate participants about newer technologies and products in Petrol Injection.
Participants: Bosch Territory Managers Sales and Service, Bosch Authorised Distributors FieldRepresentatives, Bosch Authorised Product Stockists and BCS (by invitation).
Course Content: Technology and Product Knowledge on Petrol Injection. Working of Petrol Engine,
Carburetion Process, Single Point Fuel Injection, Multi Point Fuel Injection andVehicle Diagnosis Hardware and Software.
Place: BTC (Naganathapura, Bangalore) (On request).
Course for Bosch System TechniciansCourse Code: BST
Duration: Two to five days (depending on the module).
Objective: To make the participants knowledgeable about Bosch Products, Equipmentand Vehicle Systems as per the detailed course plan for System Technicians.
Participants: System Technician Trainees working with Bosch Authorised Workshops(by invitation).
Course Content: Working Principle, Repair and Testing of Bosch Products and Respective TestEquipment, Knowledge on Vehicles, New Technologies and Diagnostic Tools/Equipment.
Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.
Courses for Sales/Service PersonnelCourse Code: TMSS
Duration: Five days.
Objective: To make participants competent in handling sales and service activities pertaining to
Bosch Products.
Participants: Bosch Territory Managers Sales and Service (by invitation).
Course Content: Product-specific contents (will be mentioned in the invitation).
Place: BTC (Naganathapura, Bangalore).
Course Code: TMSE
Duration: Five days.
Objective: To make participants competent in handling service activities pertaining to newBosch Products and Equipment.
Participants: Bosch Territory Managers Service (by invitation).
Course Content: Product-specific contents (will be mentioned in the invitation).
Place: BTC (Naganathapura, Bangalore) (on request, basic courses of two/ three daysduration will be conducted for TMSS/ TMSE at RTCs on mutually agreeable dates).
-
7/29/2019 Training Programme Guide
11/46
11
Courses for Educational Institutes
Course for TrainersCourse Code: TTT
Duration: Five days.
Objective: The Train the Trainer programme enables participants to stay abreast with the latesttechnologies.
Participants: Trainers at educational institutes, OE customers and other institutional customers,Regional/ Local Trainers (by special invitation).
Course Content: New technologies in Diesel, Gasoline, Vehicle Diagnosis Hardware and Software,Latest Product Launch, and Service and Training Concepts.
Place: BTC (Naganathapura, Bangalore).
Course for StudentsCourse Code: NEI - 2
Duration: Three days.
Objective: To educate participants about newer automotive technologies.
Participants: Final year students from technical educational institutes.
Course Content: Newer Technologies in Diesel and Petrol Injection and Vehicle Diagnosis
Hardware and Software.
Place: BTC (Naganathapura, Bangalore), RTCs and LTCs
Course for New Entrants (AA)Course Code: AANDuration: Five days.
Objective: Product Knowledge on all AA products.
Participants: All newly joined AA employees.
Course Content: Overview and understanding of Diesel Fuel Injection Systems, Gasoline Systems,Diagnostic Equipment and Automotive Accessories of Bosch.
Place: BTC (Naganathapura, Bangalore) (On request).
Course for Employees from Bosch Group (India)Course Code: RB-IND
Duration: Three days.
Objective: To make participants understand about Systems in Automobiles.
Participants: Personnel employed with Bosch Group companies.
Course Content: Overview and understanding of various vehicle systems with focus on BoschAutomotive products.
Place: BTC (Naganathapura, Bangalore) (On request)
-
7/29/2019 Training Programme Guide
12/46
12
Courses Regional/Local Training Centres(RTC/LTC)
Courses on Diesel Fuel InjectionCourse Code: PE
Duration: Three days.
Objective: To make the participants competent in carrying out quality service on Diesel FuelInjection Equipment (PE Pumps).
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops andindependent workshops handling Bosch Fuel Injection Equipment.
Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps fitted with RSVand RQV Governors, Injection Timer, Feed Pump and Filters, MPC unit and all otherAdd-on Modules, Removal and Fitment of FIE on the Vehicle and Setting of Fuel
Injection Timing.
Place: RTCs/ LTCs.
Course Code: VE - 1
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment (VE Pumps).
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops andindependent workshops handling Bosch FIE.
Course Content: Working Principle, Repair and Testing of VE Pumps fitted with Mechanical Governors.
Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel InjectionTiming.
Place: RTCs/ LTCs.
Course Code: VE - 2
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment (VE Pumps with Add-on Modules).
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops andindependent workshops handling Bosch Fuel Injection Equipment.
Course Content: Working Principle, Repair and Testing of VE Pumps with MPC and all other Add-onModules. Filters, Removal and Fitment of FIE on the Vehicle and Setting of FuelInjection Timing.
Place: RTCs/ LTCs.
-
7/29/2019 Training Programme Guide
13/46
13
Course Code: PF
Duration: One day.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment.
Participants: Fuel Injection Equipment Service Personnel, preferably Bosch Authorised
Representatives, Engineers/ Technicians from OEMs.
Course Content: Working Principle, Repair and Testing of PF and PFR Fuel Injection Pumps, Injectors,Importance of BDC dimension and adjustment.
Place: RTCs.
Course Code: EDC
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Bosch VE FuelInjection Pumps with Electronic Diesel Control (VP-37).
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives,Engineers/ Technicians from OEMs, equipped with EPS 611/620 + EDC Tools.
Course Content: Basics of EDC System, Working Principle, Repair, Testing and Adjustment of BoschDistributor-type Fuel Injection Pump (VP-37) and Injectors.
Place: RTCs.
Course Code: VS
Duration: One day.
Objective: To make participants understand the importance of Injection Timing andcompetent in setting Injection Timing on Diesel Vehicles fitted with PE and
VE-type Fuel Injection Pumps.
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives,
Engineers/ Technicians from OEMs and Diesel Mechanics.Course Content: Basic knowledge on FIE products, Setting Injection Timing on Diesel Vehicles
fitted with PE and VE-type Fuel Injection Pumps, General Maintenance Tipsand Warranty Terms.
Place: RTCs/ LTCs.
Course Code: PE - 1
Duration: Two days (on request).
Objective: To make participants equipped with Heavy-Duty Test Bench competent to carry outquality service on Fuel Injection Equipment.
Participants: Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives,
equipped with Heavy-Duty Test Bench EPS 611/ 620.Course Content: Working Principle, Repair and Testing of Bosch PE...P-type Fuel Injection Pumps with
RQV-K Governor and Injectors.
Place: RTCs (On request).
-
7/29/2019 Training Programme Guide
14/46
14
Course on Gasoline Fuel InjectionCourse Code: GFI - 1
Duration: One day.
Objective: To educate participants about newer technologies in Gasoline Systems.Participants: Bosch Territory Managers Sales and Service, Bosch Authorised Distributors Field
Representatives, Bosch Authorised Product Stockists, BCS, etc. (by invitation).
Course Content: Working of Gasoline Engines and Working Principle of Multi-Point Fuel InjectionSystem and Vehicle Diagnostics.
Place: RTCs.
Course on Auto ElectricalCourse Code: AEL - 1
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Bosch AutoElectrical Products.
Participants: Auto Electricians working in Bosch Authorised Workshops.
Course Content: Working Principle, Repair and Testing of Bosch Auto Electrical Products andRespective Test Equipment. Removal and fitment of Alternators/ Starter Motorson Vehicle.
Place: RTCs/ LTCs.
Courses on Bosch BatteryCourse Code: BB
Duration: One day.
Objective: To make participants competent in selling Bosch Batteries effectively andhandling warranty.
Participants: Bosch Authorised Distributors, Stockists, Dealers and Workshop Personnel handlingbattery sales.
Course Content: Construction and Working Principle, Features, Advantages and Benefits, ProductRange, Charging, Testing, Using BAT 121, Competitors Information, OpportunityAreas, Sales Arguments, Effective Campaigning and Warranty Handling.
Place: RTCs/ LTCs.
Course Code: VEH
Duration: One day.
Objective: To provide basic knowledge on Vehicle Systems.
Participants: Students from Polytechnics, Newly appointed
Technicians employed with Bosch AuthorisedRepresentatives.
Course Content: Diesel Engine Basics, Fuel Injection System Basicsand other Vehicular Systems.
Place: RTCs/ LTCs.
-
7/29/2019 Training Programme Guide
15/46
15
Seminars Techno-commercialCourse Code: BWF
Duration: One day.
Objective: To make Bosch Authorised Workshop Foremen competent in carrying out qualityservice on Bosch FIE and AE Products, thus ensuring customer satisfaction.
Participants: Foremen working in Bosch Authorised Workshops.
Course Content: Advanced knowledge on all Bosch Products, FIE, AE and Automotive Accessories,Warranty Administration, Attending Customers, Safety and Housekeeping,Troubleshooting of Vehicles, Effective Field Campaigning and Tips on Developing theService Business.
Place: RTCs.
Course Code: OECD
Duration: One day.
Objective: To provide knowledge on Bosch Products and Marketing Policies.
Participants: Works Managers and Technicians working with OECDs.
Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, theirQuality, Features, Schemes and Warranty Terms.
Place: RTCs/ LTCs.
Course Code: FO
Duration: One day.
Objective: To provide knowledge on Bosch Products.
Participants: Proprietors, Partners and Technicians from Fleet Operators.Course Content: Basic knowledge on Bosch Products, Maintenance Aspects, their Quality, Features
and Warranty Terms.
Place: RTCs/ LTCs.
Course Code: IE
Duration: One day.
Objective: To provide knowledge on Bosch Products.
Participants: Electricians having their own garages.
Course Content: Basic knowledge on Bosch Auto Electrical Products, Maintenance Aspects, their
Quality, Features and Warranty Terms.
Place: RTCs/ LTCs.
-
7/29/2019 Training Programme Guide
16/46
16
Course Code: CSM
Duration: One/ Two days.
Objective: To make Bosch Authorised Workshop Counter Salesmen competent in attendingcustomers profitably and ensuring customer satisfaction.
Participants: Counter Salesmen working in Bosch Authorised Workshops.
Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, WarrantyAdministration, Attending Customers, Effective Field Campaigning and Tips onDeveloping the Service Business.
Place: RTCs/ LTCs.
Course Code: PMW
Duration: One day.
Objective: To provide knowledge on latest products, Test and Diagnostic Equipment.
Participants: Proprietors of Bosch Authorised Workshops.
Course Content: Information on Latest Products, their Features, Advantages and Benefits, Test andDiagnostic Equipment required for the Workshop.
Place: RTCs (On request).
Course Code: CRO
Duration: One day (on request).
Objective: To provide basic knowledge on all Bosch Products, Test and Diagnostic Equipment,Handling, Storage and Shelf Life.
Participants: Customer Relations Officers at various Sales Offices, Personnel employed withC&F Agents.
Course Content: Information on all Bosch Products, their Applications and Usage, Test and DiagnosticEquipment used by customers.
Place: RTCs (On request).
-
7/29/2019 Training Programme Guide
17/46
17
Courses for State Transport UndertakingsCourse Code: STU - 1
Duration: Two days.
Objective: To provide knowledge on Bosch Products.Participants: Technicians working with State Transport Undertakings and other Government
Departments.
Course Content: Basic knowledge of Bosch Products, Maintenance Aspects, their Quality, Featuresand Warranty Terms.
Place: RTCs/ LTCs.
Course Code: STU - 2
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment, Auto Electrical and other Bosch Products.
Participants: Nominated Personnel from State Transport Undertakings.
Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, StarterMotors and other Bosch Automotive Accessories.
Place: RTCs/ LTCs.
Course Code: WTY
Duration: One day.
Objective: To make participants competent in handling Warranty Issues.
Participants: Bosch Authorised Workshops, Bosch Authorised Distributors Field Representatives,
Bosch Authorised Product Stockists, BCS, etc.Course Content: Manufacturing codes, Warranty Terms and Procedures.
Place: RTCs/ LTCs.
-
7/29/2019 Training Programme Guide
18/46
18
Courses for Sales PersonnelCourse Code: PFR - 4W
Duration: One/ Two days.
Objective: To make participants competent in handling Bosch Products and relatedmarket issues.
Participants: Field Representatives working with Bosch Authorised Network.
Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, theirQuality, Features, Customer Service Issues and Warranty Administration.
Place: RTCs/ LTCs.
Course Code: BS
Duration: One day.
Objective: To make participants competent in handling Bosch Products and relatedmarket issues.
Participants: Bosch Authorised Stockists, Proprietors/ Partners.
Course Content: Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, theirQuality, Features and Schemes, Selling Skills, Spare Parts Inventory Planning,Customer Service Issues and Warranty Administration.
Place: RTCs/ LTCs (On request).
Course on 2-wheeler ProductsCourse Code: PFR - 2W
Duration: One day.Objective: To make the participants competent in handling the Bosch 2-wheeler Product Range
and related issues in the market.
Participants: Bosch Authorised 2-wheeler Distributors, Proprietors/ Partners.
Course Content: Basic Knowledge on the Bosch 2-wheeler Product Range, Quality, Features, CustomerService Issues and Warranty Administration.
Place: RTCs/ LTCs.
-
7/29/2019 Training Programme Guide
19/46
19
Courses on Workshop & Test EquipmentCourse Code: WTE - 1
Duration: One/ Two days.
Objective: To enable participants to understand the Bosch Test Equipment range and basictroubleshooting.
Participants: Bosch Authorised Workshop Personnel nominated to handle Test Equipment.
Course Content: Practical Demonstration and Troubleshooting of Workshop Equipment like FIE TestBench, AE Test Bench, BAT 121, Battery Charger, etc.
Place: RTCs.
Course Code: BWSS
Duration: Two days.
Objective: To enable participants to become competent in using ESI[tronic] and MSI.
Participants: Bosch Car Service/ Bosch Authorised Workshop Personnel nominated tohandle ESI/ MSI.
Course Content: Practical Demonstration of ESI/ MSI and Practice by Participants, WorkshopReports, Manufacturing Codes, Warranty Terms and Procedures.
Place: RTCs/ LTCs.
Course for Defence PersonnelCourse Code: DEF - 1
Duration: Two days.
Objective: To make participants competent in carrying out quality service on Diesel FuelInjection Equipment, Auto Electrical and other Bosch Products.
Participants: Nominated Personnel from Defence Organisations.
Course Content: Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators,Starter Motors and other Bosch Automotive Accessories.
Place: RTCs.
Course for OE CustomersCourse Code: OEM
Duration: Two days.
Objective: To provide knowledge on Bosch Products (FIE and AE) and to apprise participantsof the latest development in Bosch Products.
Participants: Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles.
Course Content: Design, Working Principle, Test Procedure of Bosch Products (FIE and AE),and Latest Developments.
Place: RTCs.
-
7/29/2019 Training Programme Guide
20/46
20
Courses for Students and LecturersCourse Code: NEI - 1
Duration: One day.
Objective: To make participants knowledgeable about newer automotive technologies.Participants: Final year students from technical educational institutes.
Course Content: Newer Technologies in Diesel and Petrol Injection, Vehicle diagnosis Hardwareand Software, and Product Knowledge on Newer Automotive Technologiesand Accessories.
Place: RTCs/ LTCs.
Course Code: INS
Duration: One day.
Objective: To provide knowledge on all Bosch Products, Test and Diagnostic Equipment.
Participants: Lecturers from Engineering colleges, Polytechnics and other Educational Institutions.
Course Content: Basic knowledge on all Bosch Products, Test and Diagnostic Equipment andLatest Developments.
Place: RTCs/ LTCs.
-
7/29/2019 Training Programme Guide
21/46
21
Courses for Bosch Car Service (BCS)Course Code: BCS - 1 Basic Module
Duration: Two days.
Objective: To enable operating level Bosch Car Service Personnel understand the concept andmake them competent in Vehicle Diagnosis.
Participants: Bosch Car Service Technicians.
Course Content: Engine tuning and performance testing
Clutch introduction and maintenance
Steering and wheel alignment
Brake system
Suspension system
Battery starter and Alternator maintenance
Application of KTSPlace: RTCs/ LTCs.
Course Code: BCS - 2 Advanced Module
Duration: Five days.
Objective: To make Bosch Car Service Personnel competent in handling business, customerservice and technical issues.
Participants: Bosch Car Service Works Incharge.
Course Content: Industry, service marketing, customer service
Introduction to Petrol & Diesel Injection system, Different Generations
Diagnosis & Troubleshooting using KTS
Practical demonstration on the vehicle
Place: BTC (Naganathapura, Bangalore).
-
7/29/2019 Training Programme Guide
22/46
22
Course Code: EEM - 1 (Electricals/ Electronics Module 1) Basic Module
Duration: Three days.
Objective: Refreshing the basics of vehicle electrical system & vehicle electronicsystem. Test possibilities of different systems in the vehicle.
Participants: Vehicle Mechanic/ Electrician and Automotive Engineer with limitedknowledge of the field of Vehicle Electric System/ Electronic System.
Prerequisite: Knowledge of ESI[tronic] and Bosch Tester Application
Course Content: Ohms law as well as Electro-Technical basicsDesign and mode of Operation of Electrical SystemsMeasurement of Electrical Systems with different measurementDevices such as multimeter, ammeter, voltmeter as well as engine testerUnderstanding the simple Electronic circuits/ ComponentsPractical implementation of theoretical knowledge by measurement exercisesdirectly on the vehicleUnderstanding and trouble shooting of the wiring system on the Vehicle
Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.
Course Code: BCCE (Body and comfort and convenience electronics) Expert Module
Duration: Two days.
Participants: Vehicle mechanic/electrician/motor mechatronic engineer, Automotive engineer/master mechanic with good knowledge for application of ESI(tronic) & Bosch testingdevices KTS.
Prerequisite: Safe dealing with diagnosis device KTS and ESI[tronic]
Course Content: Installation and functioning of Air Conditioner and components. Components ofhydraulic circuits for throttle and expansion valve. Assembly and function ofAir-condition control.Components of air conditioner control such as switch, sensor, actuator motor &control unit.Testing of systems in the vehicle with help of ESI[tronic], CAS/ CAS (plus)KTS 550/ 570Developing diagnostic strategies and detection of diagnosis possibilities primarily incomplete system of vehicle. Practical operation in vehicles which are equipped withthe above mentioned systems.
Place: RTCs and LTCs.
Course Code: CAN (Automotive Networking) Expert Module
Duration: One day.
Objective: Understanding the set-up and functions of the networked
systems in the vehicle and their testing possibilities.
Participants: Motor Mechanic with knowledge of Vehicle Electric/ ElectronicSystem/ Automotive Engineer/ Vehicle Electrician
Prerequisite: Safe dealing with diagnosis device KTS and ESI[tronic].
Course Content: Principle set-up of CAN databaseDesign and differences of different bus systemsCAN protocol set-upNetwork topologyDos & Donts CAN systemDisplay measurement possibilities using KTS
Place: BTC (Naganathapura, Bangalore), RTCs and LTCs
-
7/29/2019 Training Programme Guide
23/46
23
Course Code: EPSV (Electronic Power Steering) Advanced Module
Duration: Two days.
Objective: Independent execution of diagnostics/ repair and maintenancework in Electronic Power Steering.
Participants: Vehicle Mechanic/ Electrician/ Automotive Engineer/ Master Mechanic with goodknowledge for application of ESI[tronic] & Bosch testing devices KTS.
Prerequisite: Knowledge of training course ESI[tronic] and Bosch tester application.
Course Content: Basic knowledge on mechanical steering systemBasic knowledge on steering geometryLimitation in mechanical steering systemInspection of mechanical componentsOverview of EPS and componentsDifferent EPS modulesSelf diagnosis on vehicleTrouble / testing of the components using KTS
Place: BTC (Naganathapura, Bangalore).
Course Code: MTS&A (Measurement, Testing of Sensors and Actuators) Advanced Module
Duration: Two days.
Objective: Basic knowledge base for specific diagnosis of faults in vehicle with main focus onsafe and effective handling of various systems in the vehicle.
Participants: Motor Mechanic/ Motor Electrician/ Motor MechatronicEngineer/ Automotive Engineer.
Prerequisite: Knowledge of ESI[tronic] and Bosch tester application
Course Content: Summary of diagnosis with measuring devices such asMultimeterEngine tester KTS
Dealing with electrical circuitsSensors & Actuators in following systemsMPFI systemCommon Rail SystemIgnition (Distributor-type & Distributor-less Electronic)Explanation and evaluation of different output and input signals.Independent operation with ESI[tronic], KTS, multimeter.
Place: RTCs and LTCs.
Course Code: EBM (Electrical Battery Management and Electrical On-board
Supply Charging Systems) Advanced Module
Duration: Two days.
Objective: Independent execution of testing and maintenance workin the vehicle on different systems
Participants: Motor Mechanic/ Motor Electrician/ Automotive Engineer with good technicalknowledge and knowledge of Electronic System.
Prerequisite: Safe dealing with diagnosis device KTS and ESI[tronic].
Course Content: Design & mode of operation of following systemsTesting of generatorsTesting of startersNew generatorsSignals from modern generators DFM, W, SStart/ Stop system
Testing and Maintenance of BatteryPractical work on vehicles which are equipped with the above mentioned systems.Testing of systems in the vehicle with the help of ESI[tronic].CAS/ CAS (plus) and KTS.
Place: BTC (Naganathapura, Bangalore).
-
7/29/2019 Training Programme Guide
24/46
24
Course Code: EXS (Exhaust system & after-treatment in passenger car) Expert Module
Duration: Two days.
Objective: Independent fault detection of faults in exhaust system in passenger car.
Participants: Motor Mechanic/ Motor Electrician/ Automobile Engineer knowledge
in the field of Gasoline/ Diesel SystemPrerequisite: Technical knowledge of the Basic fundamentals of Gasoline & Diesel Engine
Management System. Practical experience in application of ESI[Tronic] as well as inhandling KTS is advantageous.
Course Content: Emission norms ( BS IIV)Exhaust gas in the Gasoline & Diesel engineLamda Sensor & NOx sensor measuring principle, types, testing possibilities,Dos & DontsPossibilities for the after-treatment of exhaust gas in the passenger carTesting of components and systems by applying KTS in connection with ESI (tronic)and Bosch Emission Testing Equipments in the passenger car
Place: BTC (Naganathapura, Bangalore), RTCs/ LTCs.
Course Code: CRSD (Diagnosis of Bosch Common Rail Systems passenger car)
Advanced Module
Duration: Two days.
Objective: Understanding the functions of ECU Self diagnostics of CRS.Specific detection of faults in Bosch passenger Car Common Rail systems.
Participants: Motor Mechanic/ Motor Electrician/ Automobile Engineer/ Master Mechanic withpractical experience in the field of Automotive Diesel System and vehicle diagnostics.
Prerequisite: Safe dealing with diagnosis device KTS and ESI[tronic].Technical knowledge of Common Rail system.
Course Content: Design and functions of different Bosch Common Rail Generations. Sequence and
operating modes of diagnosis software as well as individual test functions withBosch Diagnostic tester KTS.Diagnostic strategies and specific detection of faults as well as fault rectificationTesting of Low-pressure/ High-pressure circuit using Bosch Diesel sets 1 & 3.Testing of Back flow using Injector return flow measuring device.
Place: BTC (Naganathapura, Bangalore) & RTCs.
Course Code: VM (Vehicle Mechanic - Passenger Car) Advanced Module
Duration: Four days.
Objective: Fault detection and rectification of faults in suspension, Steering geometry,Clutch system, different sub-systems (cooling, intake, exhaust, lubrication & main
components) of the engine.Participants: Basic training for Motor Mechanic/ Automobile Engineer
Course Content: Design and mode of operation of individual assemblies of engine mechanics,like crankshaft drive, valve train, variable valve control, engine lubrication andengine cooling.Evaluation of engine mechanics by suitable testing procedure especiallycompression test, pressure loss test .Repair and diagnostics of individual components of clutch (e.g. dual-mass flywheeland self-adjusting clutch)Diagnostics and adjustment of modern chassis and its individual components suchas shock absorber, suspension and assisted Steering systems.Requirements for wheel and tyre, wheel balancingIntroduction to TPMS (Tyre Pressure Monitoring System)
Practical work on vehicles
Place: BTC (Naganathapura, Bangalore).
-
7/29/2019 Training Programme Guide
25/46
25
Course Code: BRM (Mechanical Braking) Basic Module
Duration: Two days.
Objective: Understanding the Basic mechanical braking system, components,inspecting and testing.
Participants: Basic training for Motor Mechanic/ Automobile EngineerCourse Content: Fundamentals of braking system
Different type of brake system (mechanical, hydraulic, air)Different brake system circuitsFamiliarization of brake system components and its functionInspection and testing of the main components of the brake systemRemoval & replacement method for brake pad, cylinders, etc.Measurements: Wheel hub, brake disc, wear test, pressure testClassification of brake fluids and importanceBrake bleedingBrake pedal settingTroubleshooting instruction
Place: BTC (Naganathapura, Bangalore), RTCs and LTCs.
Course Code: BRE (Electronic Braking system) Advanced Module
Duration: Two days.
Objective: Understanding the Anti-lock braking system, components,inspection, troubleshooting & testing.
Participants: Basic training for Motor Mechanic/ Automobile Engineer
Course Content: Limitations of mechanical braking systemIntroduction & advantage of ABSUnderstanding braking force, co-efficient of frictionUnderstanding the braking force in different road conditionsLocation and function ABS components
Understanding of different type of wheel speed sensorsFunction of Bosch ABS system: ABS 2S, ABS 2E, ABS 5.0, ABS 8.0in the areas of hydraulics and electricalsUnderstanding the Wiring diagram of ABSABS: Self diagnosis & SIS on car using KTS, guided troubleshootingABS bleedingRepair & Safety instructionsIntroduction to TCS/ ESP
Place: BTC (Naganathapura, Bangalore).
-
7/29/2019 Training Programme Guide
26/46
26
Course Code: SRS (Supplementary Restraint System)
Duration: One day.
Participants: Vehicle mechanic/ Electrician/ Motor mechatronic engineer. Automotive engineer/Master mechanic with good knowledge on application of ESI (tronic) & Bosch testing
devices (KTS).
Pre requisite: Safe dealing with diagnosis device KTS and ESI[tronic]
Course Content: Safety specifications and workplace instructions dealing with airbag. Overview ofBosch airbag systems.
Assembly and functioning of passive safety systems. Airbag module (driver, passengerwindow pad), sensor technology of restraint systems. Additional functions such asroll-over protection, safety battery terminal, active head restraint, diagnostics andrepair possibilities with ESI[tronic] and KTS.
Testing of systems in the vehicle with help of ESI[tronic], CAS/CAS (plus) KTS550/570
Developing diagnostic strategies and detection of diagnosis possibilities primarily in
complete system of vehicle. Practical operation in vehicles which are equipped withthe above mentioned systems.
Place: BTC (Naganathapura, Bangalore)
Course Code: BP
Duration: One day.
Objective: To make participants competent in dealing with Bosch Brake Pads.
Participants: BCS Personnel, Bosch Authorised Product Stockists, Bosch Authorised Stockistsdealing in Brake Pads.
Course Contents: Working principle of Disc Brakes and FABs of Bosch Brake Pads.
Place: RTCs/ LTCs.
Course Code: DG
Duration: Two days.
Objective: To make participants competent in handling Advanced Diagnostic Equipment likeKTS, BAT and other Test Equipment.
Participants: Personnel employed with Bosch Authorised Workshops and BCS.
Course Contents: Diagnosis on vehicles using KTS, BAT and other Test Equipment.
Place: RTCs and LTCs.
-
7/29/2019 Training Programme Guide
27/46
27
Training Centres
BTC - Bosch Training Centre
Naganathapura, Bangalore.
RTCs - New Delhi, Kolkata,
Mumbai and Chennai.LTCs - Chandigarh, Jaipur, Lucknow,
Guwahati, Raipur, Indore,
Ahmedabad, Ernakulam, Hubli and
Secanderabad.
M.C. PantWest
Parag KavthekarNorth
Tejas PatelEast
T. NagarajBangalore
Venkatesha G. G.Bangalore
Ajay Kumar M.Bangalore
K. AravindSouth
-
7/29/2019 Training Programme Guide
28/46
28
Bosch Limited
Bosch Training Centre
Naganathapura Plant
Electronic City P.O.
Post Box No. 6887, Bangalore - 560 100
Ph.: (080) 4103 5541/2/3/0Telefax: (080) 2852 1239/2852 1608
E-mail: [email protected]
Accommodation and Transport Bangalore
At Hosur Road between Bosch,
Adugodi and Naganathapura Plant
1. Krishna Rooms
No. 77, Hosur Main RoadNear Ayyappa Temple, Madiwala
Bangalore - 560 068
Ph.: (080) 2552 5723/24/25
*Tariff:
Rs. 995 + Tax (Double, Non-AC),
Rs. 1650 + Tax (Double, AC)
Other hotels in the city:
1. Brindavan Hotel
M.G. Road
Bangalore - 560 001
Ph.: (080) 2558 4000
**Tariff:
Rs. 624 (Single, Non-AC),
Rs. 780 (Double, Non-AC),
Rs. 1116 (Single, AC),
Rs. 2475 (Double, AC)
2. Hotel Gautam
17, Museum Road
Bangalore - 560 001
Ph.: (080) 2558 8764
**Tariff:
Rs. 600 (Single, Non-AC),
Rs. 800 (Double, Non-AC)
3. Hotel Harsha
ShivajinagarBangalore - 560 051
Ph.: (080) 2286 5566
**Tariff:
Rs. 4500 (Single, AC Deluxe),
Rs. 5000 (Double, AC Deluxe)
4. Hotel Prashanth
21, East Tank Bund Road
Bangalore - 560 009
Ph.: (080) 2287 4041
*Tariff:
Rs. 450 + Tax (Single, Non-AC),
Rs. 600 + Tax (Double, Non-AC),
Rs. 850 + Tax (Double, AC)
5. Sri Ramakrishna Lodge
Subedar Chatram Road
Bangalore - 560 009
Ph.: (080) 2226 3042**Tariff:
Rs. 310 (Single, Non-AC),
Rs. 590 (Double, Non-AC)
6. Woodlands Hotel
5, Sampangi Tank Road
Bangalore - 560 025
Ph.: (080) 2222 5111
*Tariff:
Rs. 1900 + Tax (Double, Non-AC),
Rs. 2200 + Tax (Non-AC, Deluxe),
Rs. 3100 + Tax (AC, Deluxe),
Rs. 3000 (Executive Room),
Rs. 3900 + Tax (AC Cottages)
7. Hotel Ajantha
22-A, M.G. Road
Bangalore - 560 001
Ph.: (080) 2558 4321
**Tariff:
Rs. 510 (Single, Non-AC),
Rs. 795 (Double, Non-AC),
Rs. 1230 (Deluxe Room),
Rs. 1400 (Cottage Room)
8. Hotel Sunflower
129, Brigade Road
Bangalore - 560 025
Ph.: (080) 2557 1945**Tariff:
Rs. 700 (Double, Non-AC),
Rs. 1200 (Double, AC)
Transportation
There are frequent bus services at
intervals of 30 min. from all the three
major bus stations in Bangalore
to Nagnathapura.
Given below is a list of bus numbers
from each bus station.
From K.R. Market
Bus No. 346J
From Majestic
(Kempe Gowda Bus Station/
Central Bus Station)
Bus No. 347F
From Shivajinagar
Bus No. 347G
Note: The hotel rates mentioned are
only indicative. Tariffs may vary.
* Rates exclusive of taxes
** Rates inclusive of taxes
-
7/29/2019 Training Programme Guide
29/46
29
Bosch Limited
Bosch Training Centre
C/o Sunehri Exports, Plot No. B-1/ E24
Mohan Co-operative Industrial Estate,Mathura Road,
New Delhi - 110 044
Mobile: 098713 07355
E-mail: [email protected]
North Region
Accommodation New DelhiAll the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
1. Hotel Bhagirath Palace
Opp. Red Fort
Chandni Chowk
New Delhi - 110 006
Ph.: (011) 2386 6223/2386 6723
2. Wood Inn Hotel
8, Local Shopping Centre
Kirti Nagar
New Delhi - 110 015
Ph.: (011) 2543 8500/2543 9136
3. Vivek Hotel
1534 - 50, Main Bazar, Pahar Ganj
New Delhi - 110 055
Ph.: (011) 5154 1435/5154 1436
4. Hotel Regal
Shyama Prasad
Mukherjee Marg
New Delhi - 110 006
Ph.: (011) 2394 3999/2397 9115
5. Hotel Tourist
Ram Nagar, Pahar Ganj
New Delhi - 110 055
Ph.: (011) 2361 0334-340
6. Rail Yatri Nivas
New Delhi Railway Station
New Delhi - 110 002
Ph.: (011) 2323 3484
-
7/29/2019 Training Programme Guide
30/46
30
Bosch LimitedLocal Training Centre (LTC)
C/o Jaeco Diesels
SCF 344-345
New Motor Market, Manimajra
Chandigarh - 160 101
Accommodation Chandigarh
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
1. Hotel Deep Palace
SCF - 248, Motor Market
Manimazra, Chandigarh
Ph.: (0172) 273 1973
Tariff:
Rs. 150 (Standard Single, Air Cooled),
Rs. 200 (Standard Double, Air Cooled),
Rs. 350 (AC)
2. Hotel Chander Palace
SCO - 453 - 454
Near Dhillon Complex
Motor Market, Manimazra
Chandigarh
Ph.: (0172) 273 4152
Tariff:
Standard AC Room:
Rs. 300 (Twin-sharing basis)Rs. 400 (Single, Deluxe)
3. Hotel Indian Palace
SCF - 13 - 14, Motor Market
Manimazra, Chandigarh
Ph.: (0172) 273 9994
Tariff:
Rs. 350 (Single Standard, Air Cooled),
Rs. 450 (Double, Standard AC),
Rs. 650 (Double, Deluxe AC)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
-
7/29/2019 Training Programme Guide
31/46
31
Bosch LimitedLocal Training Centre (LTC)
C/o Arora Diesels
Akash Deep Building
A-5, Transport Nagar
Jaipur - 302 004
Accommodation Jaipur
All the participants are advised to arrange their own accommodation as required.Given below is a recommended hotel:
1. Hotel Broadways
Transport Nagar, Agra Road, Jaipur
Ph.: (0141) 511 2010/11, 264 1275
Tariff:Rs. 300 (Twin-sharing basis)
Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.
-
7/29/2019 Training Programme Guide
32/46
32
Bosch Limited
Local Training Centre (LTC)
C/o Raman Diesels
D-1, Transport Nagar
Lucknow - 226 012
Accommodation Lucknow
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
1. Hotel Aadharshila
VIP Road, Alambagh, Lucknow
Ph.: (0522) 246 0550
Tariff:
Rs. 550 (Standard),Rs. 650 (Semi Deluxe),
Rs. 850 (AC, Deluxe)
2. Hotel Rangoli
Near Hardoi Bus Stand, Charbagh
Lucknow
Ph.: (0522) 263 5926/263 5902/263 5293
Tariff:
Rs. 250 (Air Cooled, Single Bed),
Rs. 450 (Air Cooled, Double Bed),
Rs. 650 (Single Bed, AC Deluxe),
Rs. 90 (Dormitory)
3. Hotel Pooja
Charbagh, Lucknow
Ph.: (0522) 245 7525
Tariff:
Rs. 200 (Single Bed, Attached Bathroom),Rs. 250 (Double Bed, Attached Bathroom)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
-
7/29/2019 Training Programme Guide
33/46
33
South Region
Accommodation Chennai
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
4. Royal Guest House
Old No. 26, New No. 4, Boobegam Street,
Chennai - 600 002
Ph.: (044) 2861 1044, 45
Tariff:Rs. 250 (Single room)
Rs. 350 (Double room)
5. Sarvana Lodge
Next to Hotel Sarvana Bhavan,
T. Nagar, Chennai - 600 017
Tariff:
Rs. 280 (Single room)
Rs. 350 (Double room)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
1. Sri Ramakrishna Nivas
No. 1, Woods Road,
Annasalai, Chennai - 600 002
Ph.: (044) 2860 3329
2860 2154
2. Regency Golden Sun Hotel
No. 1, Hanumanth Rao Street
T. Nagar, Chennai - 600 017
Ph.: (044) 2828 2772
3. Rohini International
No. 67, G.N. Chetty Road, T. Nagar
Chennai - 600 017
Bosch Limited
Bosch Training Centre
Blossom CentreOld No. 27, New No. 30, North Boag Road
T. Nagar, Chennai - 600 017
Ph.: (044) 2815 3916/2815 3917
Mobile: 091766 40990
E-mail: [email protected]
-
7/29/2019 Training Programme Guide
34/46
34
Accommodation Hubli
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
1. The Hans Hotel
P.B. Road, Vidyanagar
Hubli - 580 031
Ph.: (0836) 237 4770
2. Hotel CanaraP.B. Road, Hosur
Hubli - 590 021
Ph.: (0836) 237 2561
3. Hotel Chalukya
Club Road
Hubli - 590 021
Ph.: (0836) 235 4234
4. Hotel Ambesh
Opp. Mirjankar Petrol Pump
P.B. Road
Hubli - 590 021
Ph.: (0836) 227 2378
5. Hotel AyodyaOpp. Old Bus Stand
Hubli - 590 021
Ph.: (0836) 235 1951
Bosch LimitedLocal Training Centre (LTC)
C/o Manickbagh Diesels
Baddi Building
Unkal Cross, P.B. Road
Hubli - 580 031
-
7/29/2019 Training Programme Guide
35/46
35
Accommodation Ernakulam
Given below are the list of few hotels:
Bosch Limited
Local Training Centre (LTC)
C/o Surya Diesels,
Muttom, Thaikattukara P.O.,Opposite Indian Oil Petrol Pump,
Aluva-683 106
Ernakulam
Ph.: (0484) 2626 381/ 2626 382
E-mail: [email protected]
1. City Gates Residency
Near IOC Petrol Pump, Muttom.
Ph.: (0484) 262 8387
Tariff:
Rs. 300 (Single room)Rs. 400 (Double room)
2. M.I.K Tourist Home
H.M.T Junction,
Kalamassery.
Ph.: (0484) 255 5010/ 646 1201
Tariff:
Rs. 400 (Single room)
Rs. 500 (Double room)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
-
7/29/2019 Training Programme Guide
36/46
36
Accommodation Secunderabad
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
1. Rajadhani Lodge
Plot No. CFZ/S-13A & B
Auto Nagar
Vijayawada Highway
Hyderabad - 500 070
Ph.: (040) 2412 3434
2. Taj Mahal Hotel
Patny Centre
Secunderabad - 500 003
Ph.: (040) 2781 2106
3. Hotel Basera
S.D. Road
Secunderabad - 500 004
Ph.: (040) 2770 3200
Bosch Limited
Local Training Centre (LTC)
C/o Secunderabad Engg. Corp.
Plot No. 6, Block No. 11
Autonagar, Hyderabad - 500 070
-
7/29/2019 Training Programme Guide
37/46
37
East Region
Bosch Limited
Bosch Training Centre
Post Box No. 9044,91-A, Park Street,
Kolkata - 700 016
Ph.: (033) 2217 2144/2217 5222
Mobile: 097487 64392
E-mail: [email protected]
Accommodation Kolkata
All the participants are advised to arrange their own accommodation as required.Given below is a recommended hotel:
1. Hotel Capella
49, R.A. Kidwai Road, Kolkata - 700 016
Ph.: (033) 2229 4365/224 98921
Tariff:
Rs. 395 (Single),Rs. 450 (Single room, Twin-sharing basis),
Rs. 775 (Double room, Shared by 4)
Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.
-
7/29/2019 Training Programme Guide
38/46
38
1. Hotel Shyam Sarover
Near Ram Mandir, A.T. Road
Guwahati - 781 001
Ph.: (0361) 251 1577/ 254 1611
Tariff:Rs. 100
2. Mayur Hotel
Paltan Bazar, Guwahati-781008
Opp. ASTC Bus Stand
Ph.: (0361) 2734855/56/57/58/59/60/61
(0361) 2739603/20/25
Tariff:
Rs. 160 (Single Economy)
Rs. 200 (Single Standard)
Rs. 290 (Single Deluxe)
Rs. 600 (Single Super Deluxe)
Rs. 299 (Double Economy)
Rs. 400 (Double Deluxe)Rs. 700 (Double Super Deluxe)
Rs. 800 (Double Special Deluxe)
Rs. 900 (Double Executive)
Rs. 1200 (Double Premium)
Rs. 1000 (Junior Suite)
Rs. 1300 (Semi Suite)
3. Hotel Eden
Opp. Bengali H. S. School, G.S. Road,
Paltan Bazar, Guwahati -781008
Ph.: (0361) 2739578, 2639963
Tariff:
Rs. 300 (Single Deluxe)
Rs. 550 (Single Deluxe)Rs. 650 (Single Deluxe/ AC)
Rs. 1000 (Double Deluxe/ AC)
4. Hotel Rialto
GNB Road, Paltan Bazar,
Guwahati - 781001
Ph.: (0361) 2131210, 2734450
Tariff:
Rs. 1800 (Executive)
Rs. 1500 (Deluxe)
Rs. 1000 (Standard)
Accommodation Guwahati
All the participants are advised to arrange their own accommodation as required.Given below is a recommended hotel:
5. Hotel Hornbill
Md Shah Road, Paltan Bazar,
Guwahati - 781008
Ph.: (0361) 2735401
Tariff:Rs. 1400 (Single Deluxe) & Rs. 1600 (Double Deluxe)
Rs. 1600 (Single Luxury) & Rs. 2000 (Double Luxury)
Rs. 2200 (Single Executive) & Rs. 2600 (Double Executive)
Rs. 3600 (S Hornbill Suit) & Rs. 3600 (D Hornbill Suite)
Rs. 9500 (S President Suit) & Rs. 9500 (D President
Suite)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
Bosch Limited
Local Training Centre (LTC)
C/o Guwahati Diesels
A.T. Road
Guwahati - 781 001
-
7/29/2019 Training Programme Guide
39/46
39
Accommodation Raipur
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
1. Gass Memorial Centre
Opp. Raipur Diesels
Near Jai Stambh Chowk
K.K. Road, Moudhapara, Raipur
Ph.: (0771) 235 6532
Tariff:
Rs. 145 (Single),
Rs. 210 (Double)
2. Hotel Usabh Palace
K.K. Road
Near Gujarati School, Raipur
Ph.: (0771) 503 0824
Tariff:
Rs. 250 (Single),
Rs. 150 (Double),
Rs. 100 (Dormitory)
Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.
Bosch Limited
Local Training Centre (LTC)
C/o Raipur Diesels
Krishna Kumar Road
Raipur - 492 001
-
7/29/2019 Training Programme Guide
40/46
40
West Region
Accommodation Mumbai
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
Bosch Limited
Bosch Training Centre79, Dr. Annie Besant Road
Worli, Mumbai - 400 018
Ph.: (022) 2493 2071-4, 2493 0452
Mobile: 99875 64775
E-mail: [email protected]
10. Hotel Sunbeam
Manoj Mandir Apartments
Dr. E. Moses Road
Adjacent to Geeta Cinema
Worli Naka, Mumbai - 400 018
Ph.: (022) 2492 9340
11. Hotel Hill View
Opp. Campa Cola Factory
B.G. Kher Road
Worli Naka, Mumbai - 400 018
Ph.: (022) 2493 5630/2496 1858
12. Hotel Rahat Palace
Dr. E. Moses Road
Next to Geeta Cinema
Worli Naka, Mumbai - 400 018
Ph.: (022) 2496 4411-7
1. Shantidoot Hotel
Dr. Ambedkar Road
Opp. Hindmata Cinema
Dadar (E), Mumbai - 400 014
Ph.: (022) 2416 4923-4
2. Hotel Midtown Pritam
20-B, Dharamputra Pritam Estates
Dadar (E), Mumbai - 400 014
Ph.: (022) 2414 5555/2414 5959
3. Hotel Regency
73, Napean Sea Road
Mumbai - 400 006
Ph.: (022) 2369 7700/2363 0002-3
4. Hotel Windsor
10, Kumpta Street Ballard Estate Fort
Mumbai - 400 038
Ph.: (022) 2261 3071/2261 8321-7
5. Marina Guest House13, Soona Mahal
143, Marine Drive
Mumbai - 400 020
Ph.: (022) 2282 1924
6. Mehra Resorts
79, Dr. Annie Besant Road
Worli, Mumbai - 400 018
Ph.: (022) 2492 5280-1
7. Ritz Hotel Pvt. Ltd.
5, Jamshedji Tata Road
3, Churchgate,
Mumbai - 400 020
Ph.: (022) 2285 0500, 2283 7623
8. Sea Green Hotel
145, Marine Drive
Mumbai - 400 020
Ph.: (022) 2282 2294
9. Shalimar Hotel Pvt. Ltd.
August Kranti Marg
Mumbai - 400 036
Ph.: (022) 5664 1000
-
7/29/2019 Training Programme Guide
41/46
41
1. Hotel Moni
Opp. Shakti Estate
Narol Isanpur Road
Ahmedabad
Tariff:Rs. 300 (Single),
Rs. 400 (Double)
2. Hotel Prestige
Opp. Sai Diesels, Narol Cross Road
Near Vijay Transport, Ahmedabad
Tariff:
Rs. 250 (Single),
Rs. 350 (Double)
3. Hotel Ellis
Bridge, Opp.Town Hall,
Ashram Road, Ahemadabad
Ph.: 098240 26530/ 079 2657 5811
Tariff:
Rs. 300 to 500 (Single),
Rs. 400 to 625 (Double)
A/C Rooms at Extra Cost
4. Hotel Atithi
Opp. Kasturi Dining Hall,
Paldi, Ahemadabad
Ph.: 098250 39809/ 079 2658 2912
Tariff:
Rs. 200 to 300 (Single),
Rs. 300 to 400 (Double)
2. Hotel Kapadiya
Near, V. S. Hospital,
Opp. Mahak and Building, Ellis Bridge
Ph.: 093270 07923/ 079 2657 9571
Tariff:Rs. 300 (Single),
Rs. 400 (Double)
Rs. 100 (Dormitory)
2. Hotel Gurukrupa
Ellis Bridge, Behind Town Hall, Ashram Road
Ph.: 079 2657 7174
Tariff:
Rs. 200 (Single),
Rs. 250 (Double)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
Bosch Limited
Local Training Centre (LTC)C/o Sai Diesel Service
2/A, Geetabhavan
Opp. Vijay Transport
Near Kashiram Textile
Narol, Ahmedabad - 380 005
Accommodation Ahmedabad
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
-
7/29/2019 Training Programme Guide
42/46
42
Accommodation Indore
All the participants are advised to arrange their own accommodation as required.Given below is a list of hotels:
Bosch Limited
Local Training Centre (LTC)
C/o Ujjain Diesels Pvt. Ltd.
118 - A, Transport Nagar
Indore - 452 001
1. Hotel Mayur
39, Chhoti Gwal Toli
Opp. Madhu Milan Cinema
Indore
Ph.: (0731) 270 5786/270 6786
2. Hotel Parag Regency
Near Kibe Compound
Kamala Nehru School Road
Indore
Ph.: (0731) 504 2276
3. Hotel Uday Palace
7, Kibe Compound
Near Madhu Milan Talkies
Indore
Ph.: (0731) 270 4088
4. Hotel Poonam
Chhoti Gwal Toli
Near Patel StatueIndore
Ph.: (0731) 252 2250/252 2273
5. Hotel Crown
Opp. Sarwate Bus Stand
Indore
Ph.: (0731) 252 2250/252 2273
6. Hotel New Sunder17/2, South Tukoganj
Indore
Ph.: (0731) 252 9051/252 0128
7. Hotel Galaxy
Tower Chouraha
Indore
Ph.: (0731) 247 2602/244 0206
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.
-
7/29/2019 Training Programme Guide
43/46
43
Eligibility and Enrolment Procedure
The Bosch Training CentreYour partner in educating your specialists
Qualified, experienced and competent personnel are essential for handling service of Bosch products.
Send your personnel for training and further education to the Bosch Training Centre. Ensure that you remain
competitive in the future. Plan now for your future requirements.
Note: Training Fee will be debited to Network directly by Bosch Limited (DD not required). For Externalcustomers like OEMs, OECDs, STUs, Defence and Educational Institutions, Application Form to be
accompanied with DD.
Eligibility
f Only those candidates who are employed with and sponsored by Bosch Authorised Representatives,
Original Equipment Customers and their Dealers, State Transport Undertakings, Defence Organisations,Government Departments, ITI, Diploma College, Engineering Colleges, JOC Colleges, etc., are normally
considered eligible for training.
f Candidates should have adequate working knowledge of the medium of instruction. The course should be
selected depending upon the proficiency of the candidate in the particular language.
Fee
f For Courses/ Seminars at BTC: Rs. 900 per day/ person + taxes (10.3 percent)
f For Courses/ Seminars at LTC: Rs. 500 per day/ person + taxes (10.3 percent)
How to apply?
Bosch Training Courses are offered at Bangalore, Chennai, Ernakulam Kolkata, Mumbai, New Delhi, Ahmedabad,Chandigarh, Guwahati, Indore, Jaipur, Lucknow, Raipur, Secunderabad and Hubli. Candidates mayapply at any Training Centre of their choice. Application should be made on the prescribed application form,giving the required particulars to the BTC, or the respective RTCs/ LTCs of the region.
Bangalore: Bosch Training CentreBosch LimitedNaganathapura Plant, Electronic City P.O.Post Box No. 6887, Bangalore - 560 100Ph.: (080) 4103 5541/ 42/ 43/ 40. Fax: (080) 2852 1608/ 2852 1239E-mail: [email protected], [email protected],[email protected]
For RTC/LTCs at Chennai, Ernakulam, Hubli and Secunderabad, apply to:
Chennai: Regional TrainerBosch LimitedBlossom CentreOld No. 27, New No. 30, North Boag RoadT. Nagar, Chennai - 600 017Ph.: (044) 2815 3916/ 2815 3917Mobile: 091766 40990E-mail: [email protected]
For RTC/LTCs at Kolkata, Guwahati and Raipur apply to:Kolkata: Regional TrainerBosch LimitedPost Box No. 904491-A, Park Street, Kolkata - 700 016
Ph.: (033) 2217 2144/ 2226 4570. Fax: (033) 2249 7482Mobile: 097487 64392E-mail: [email protected]
-
7/29/2019 Training Programme Guide
44/46
44
For RTC/LTCs at Mumbai, Ahmedabad and Indore, apply to:
Mumbai: Regional TrainerBosch Limited79, Dr. Annie Besant Road, WorliMumbai - 400 018Ph.: (022) 2493 2071/ 2497 2075. Fax: (022) 2497 3924Mobile: 099875 64775E-mail: [email protected]
For RTC/LTCs at New Delhi, Chandigarh, Jaipur and Lucknow, apply to:New Delhi: Regional TrainerBosch LimitedC/o Sunehri Exports,Plot No. B1/E24, Mohan Co-operative Industrial EstateMathura Road, New Delhi - 110 044
Mobile: 098713 07355E-mail: [email protected]
How to apply?
Working Hours:
RTCs/ LTCs: Monday to Friday 1000 to 1700 hr.
BTC: Monday to Friday 0900 to 1600 hr.
f Candidates are required to make their own arrangements for lodging, boarding and transport.
Some hotels are listed in this brochure. If any assistance is required, candidates may approach therespective Training Centres.
f
In order to maintain the quality of training (during practical demonstration classes) the number of candidatesfor each course is restricted to 12.
f Seats are reserved on a first-come-first-served basis. Candidates are to be deputed only after receipt of the
confirmation from Bosch.
f Candidates reporting for a course without our confirmation will be accommodated only if there is a vacancy.
f Candidates attending the course should bring a letter of introduction from the sponsoring organisation.
f Although precautions are taken for the safety of the trainees, the company assumes no responsibility for anyinjury caused to them or loss of personal articles during the training period.
f No refund of the Seminar/ Course fee for non-participation will be made, nor will it be adjusted for anotherSeminar/Course.
f Photography is prohibited within the factory premises.
f Applications should reach the Training Centres at least four weeks in advance of the requiredSeminar/ Course.
f Applicants should not bring any laptops, mobiles with cameras, floppy diskettes, CDs/ DVDs, video cameras,pen drives or memory sticks.
f Participants shall be held responsible for the loss of any Bosch property from the Training Centres during
the Training courses.
-
7/29/2019 Training Programme Guide
45/46
45
Notes ___________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
-
7/29/2019 Training Programme Guide
46/46
Bosch Limited,Bosch Training Centre,Automotive Aftermarket,
814|2012|AET|Cal