tx34d200vm0baa - koe.j-display.com4. absolute maximum ratings item symbol min. max. unit remarks...
TRANSCRIPT
FOR MESSRS : DATE : Jun. 25th 2019
CUSTOMER’S ACCEPTANCE SPECIFICATIONS
TX34D200VM0BAA
Contents
No. ITEM SHEET No. PAGE
1 COVER 7B64PS 2701-TX34D200VM0BAA-1 1-1/1
2 RECORD OF REVISION 7B64PS 2702-TX34D200VM0BAA-1 2-1/1
3 GENERAL DATA 7B64PS 2703-TX34D200VM0BAA-1 3-1/1
4 ABSOLUTE MAXIMUM RATINGS 7B64PS 2704-TX34D200VM0BAA-1 4-1/1
5 ELECTRICAL CHARACTERISTICS 7B64PS 2705-TX34D200VM0BAA-1 5-1/1
6 OPTICAL CHARACTERISTICS 7B64PS 2706-TX34D200VM0BAA-1 6-1/2~2/2
7 BLOCK DIAGRAM 7B64PS 2707-TX34D200VM0BAA-1 7-1/1
8 RELIABILITY TESTS 7B64PS 2708-TX34D200VM0BAA-1 8-1/1
9 LCD INTERFACE 7B64PS 2709-TX34D200VM0BAA-1 9-1/6~6/6
10 OUTLINE DIMENSIONS 7B64PS 2710-TX34D200VM0BAA-1 10-1/2~2/2
11 APPEARANCE STANDARD 7B64PS 2711-TX34D200VM0BAA-1 11-1/3~3/3
12 PRECAUTIONS 7B64PS 2712-TX34D200VM0BAA-1 12-1/2~2/2
13 DESIGNATION OF LOT MARK 7B64PS 2713-TX34D200VM0BAA-1 13-1/1
ACCEPTED BY: PROPOSED BY:
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2701-TX34D200VM0BAA-1 PAGE 1-1/1
2. RECORD OF REVISION
DATE SHEET No. SUMMARY
KAOHSIUNG OPTO-ELECTRONICS INC. SHEET
NO. 7B64PS 2702-TX34D200VM0BAA-1 PAGE 2-1/1
3. GENERAL DATA
3.1 DISPLAY FEATURES
This module is a 13.3” UHD of 16:9 format of LTPS TFT. The pixel format is vertical stripe and sub pixels are arranged as R(red), G(green), B(blue) sequentially .This display is RoHS compliant , and COG (chip on glass) technology and LED backlight are applied on this display.
Part Name TX34D200VM0BAA
Module Dimensions 298.46(W) mm × 175.69 (H) mm × 2.0(D) mm (max) (w/o PCB)
LCD Active Area 293.76(W)mm x 165.24(H)mm
Pixel Pitch 0.0765 (W) mm × 0.0765 (H) mm (332ppi)
Resolution 3840× 3 (RGB) (W) × 2160 (H) dots
Color Pixel Arrangement RGB Vertical Stripe
LCD Type Transmissive Type, Normally Black
Display Type Active Matrix
Number of Colors 16.7M Colors (8-bit RGB)
Backlight Light Emitting Diode (LED)
Weight 170g(typ)
Interface 4lane 5.4Gbps eDP1.4
Power Supply Voltage 3.3V for LCD; 12.0V for Backlight
Viewing Direction Super Wide Version
Surface Treatment HC-Polarizer (3H)
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2703-TX34D200VM0BAA-1 PAGE 3-1/1
4. ABSOLUTE MAXIMUM RATINGS
Item Symbol Min. Max. Unit Remarks
Supply Voltage VDD -0.3 - V -
Operating Temperature Top 0 50 C Note 1
Storage Temperature Tst -20 60 C Note 1
Backlight Input Voltage VBL 6 20 V -
Note 1: The maximum rating is defined as above based on the chamber temperature, which might be different from ambient temperature after assembling the panel into the application. Moreover, some temperature-related phenomenon as below needed to be noticed:
- Background color, contrast and response time would be different in temperatures other than 25 C .
- Operating under high temperature will shorten LED lifetime.
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2704-TX34D200VM0BAA-1 PAGE 4-1/1
5. ELECTRICAL CHARACTERISTICS
5.1 LCD CHARACTERISTICS
Item Symbol Min Typ. Max Unit Remarks
Power Supply Voltage VDD 3.0 3.3 3.6 V -
Power consumption for LCD
White pattern PVDD white - 1.42 1.88 W Note 1
Mosic pattern PVDD mosic - 1.44 1.90 W
Frame Frequency Framef 48 60 Hz -
Output Voltage
(HPD)
IOH =50μA VOH 2.25 - - V -
IOL=4mA VOL - - 0.7 V -
Note 1: VDD=3.3V, Ta=25℃, fFrame=60Hz.
5.2 BACKLIGHT CHARACTERISTIC
Item Symbol Min Typ. Max Unit Remarks
BL Input Voltage VBL 6 12 20 V -
Power consumption for Backlight PBL - 2.49 3.34 W Note 1
BL_ENABLE Voltage High level VBLEN H 2.0 - 3.6 V -
Low level VBLEN L -0.3 - 0.8 V -
BL_PWM_DIM Voltage High level VPWM H 2.0 - 3.6 V -
Low level VPWM L -0.3 - 0.8 V -
BL CTL Diming frequency f DIM 100 - 2k Hz -
PWM Duty Ratio Duty 5 - 100 % -
Note 1: As Fig. 5.1 shown, LED current is controlled by the LED driver when applying 12V.
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2705-TX34D200VM0BAA-1 PAGE 5-1/1
GND = 0V, Ta = 25°C
GND = 0V, Ta = 25°C
Fig 5.1
BL_ENABLE (PIN 32)
VBL(PIN36-PIN39)
PWM duty 5% to 100%
BL_PWM_DIM(PIN 33)
6. OPTICAL CHARACTERISTICS The optical characteristics are measured based on the conditions as below:
- Supplying the signals and voltages defined in the section of electrical characteristics.
- The backlight unit needs to be turned on for 30 minutes.
- The ambient temperature is 25 C .
- In the dark room less than 1 lx, the equipment has been set for the measurements as shown in Fig 6.1. 3.3VV Hz, 60 ,25 DD Framea fCT
Item Symbol Condition Min. Typ. Max. Unit Remarks Brightness of White
(5 points ave.) B
0 ,0 ,
297.5 350 - cd/m2 Note 1
Brightness Uniformity (5 points) - - - 1.25 - Note 2
Brightness Uniformity (13 points) - - - 1.5 - Note 2
Contrast Ratio CR 1050 1500 - - Note 3
Response Time Tr + Tf 0 ,0 - 30 40 ms Note 4
NTSC Ratio - 0 ,0 69 72 - % -
Gamma - 0 ,0 - 2.2 - - -
Viewing Angle x 10 CR ,0 160 - 176
Degree Note 5 y 10 CR ,90 160 - 176
Color
Chromaticity
Red X
0 ,0
0.613 0.643 0.673
CIE Note 6
Y 0.290 0.320 0.350
Green X 0.268 0.298 0.328
Y 0.572 0.602 0.632
Blue X 0.123 0.153 0.183
Y 0.027 0.057 0.087
White X 0.0275 0.305 0.335
Y 0.290 0.320 0.350
Note 1: The brightness is measured the average of 5 points, in Fig. 6.2(b), for the typical value.
Note 2: The brightness uniformity is calculated by the equation as below:
which is based on the brightness values of the 5 points and 13 points in active area measured by BM-5 as shown
in Fig. 6.2(a)(b).
1
KAOHSIUNG OPTO-ELECTRONICS INC. SHEET
NO. 7B64PS 2706-TX34D200VM0BAA-1 PAGE 6-1/2
Brightness uniformity = Max. Brightness
Min. Brightness
Fig 6.1
Note 3: The Contrast Ratio is measured from the center point of the panel, P7, and defined as the following equation:
Black of Brightness
Whiteof Brightness CR
Note 4: The definition of response time is shown in Fig. 6.3. The rising time is the period from 10% brightness to 90% brightness when the data is from black to white. Oppositely, falling time is the period from 90% brightness falling to 10% brightness.
Fig.6.3
Note 5: The definition of viewing angle is shown in Fig. 6.4. Angle is used to represent viewing directions, for instance, 270 means 6 o’clock, and 0 means 3 o’clock. Moreover, angle is used to represent viewing angles from axis Z toward plane XY.
The display is super wide viewing angle version, so that the best optical performance can be obtained from every viewing direction.
3 o'clockxx'
y
y'
z
z'
,0)y (x,
0
90
180
270 6 o'clock
12 o'clock
9 o'clock
= Viewing angle
Fig 6.4
Note 6: The color chromaticity is measured from the center point, P7, as shown in Fig. 6.2(a)(b).
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2706-TX34D200VM0BAA-1 PAGE 6-2/2
Fig 6.2(b)
1 01 0
1 0
1 0
P 4
P 7
P 5
W /4 W /4 W /4 W /4
H /4
H /4
H /4
W
P 9 P 1 0
H /4
P 1 P 3
P 6 P 8
P 1 1 P 1 3
P 2
P 1 2
H
Fig 6.2(a)
7. BLOCK DIAGRAM
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO.
7B64PS 2707-TX34D200VM0BAA-1 PAGE 7-1/1
LCD
3840(H) x RGB x 2160(V)
2160
pixe
l
3840pixel
R G B
TCON
4lane eDP ver1.4
LED_ Dr_IC
Power IC
IPEX-20455-040E
Flash
PWM PWM eDP1.4
VDD(3.3V)/VBL Anode 1-6 (6-20V)
1.8V/1.1V/VGH/VGL
48 LED Backlight
Scan direction
1 3840
HPD,AUX,LCD Self test,BL_EN,
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2708-TX34D200VM0BAA-1 PAGE 8-1/1
8. RELIABILITY TESTS
Test Items Conditions
High temperature & Humidity 1) Storage
2) 60℃, 80%RH 240 h
Low temperature 1) Storage
2) -20℃, 240 h
Humidity test 1) Operation
2) 40℃,20%RH→40℃,85%RH 8hrs→24hrs
High temp/ High humid 1) Operation
2) 50℃, 80%RH, 240 h
Low temperature 1) Operation
2) 0℃, 240 h
Thermal Shock 1) non-operation
2) T= -20℃(30mins) ->+60℃(30mins) 100cycles
Vibration
1) Non-operation
2) 20 to 200Hz,
3) 1.5G,
4) 3 directions(x,y,z)
half hour each direction
Mechanical Shock 1) Non-operation
2) 100G, 6ms half sine, ±x, ±y, ±z 2 times for each
ESD
1) Operating
2) Tip:150 pF,330
3) Air discharge for glass: 10KV
4) Contact discharge for metal frame: 6KV
1) Glass: 9 points 2) Metal frame: 8 points
Note 1: Display functionalities are inspected under the conditions defined in the specification after the reliability tests.
Note 2: The display is not guaranteed for use in corrosive gas environments.
9. LCD INTERFACE
9.1 INTERFACE PIN CONNECTIONS
The display interface connector CN1 is 20455040E made by IPEX and pin assignment is as below:
Pin No. Signal I/O Function Remarks
1 NC - Reserved for LCD manufacture's use Keep Open
2 H_GND P High Speed Ground
3 Lane3_N I Complement Signal Link Lane 3
4 Lane3_P I True Signal Link Lane 3
5 H_GND P High Speed Ground
6 Lane2_N I Complement Signal Link Lane 2
7 Lane2_P I True Signal Link Lane 2
8 H_GND P High Speed Ground
9 Lane1_N I Complement Signal Link Lane 1
10 Lane1_P I True Signal Link Lane 1
11 H_GND P High Speed Ground
12 Lane0_N I Complement Signal Link Lane 0
13 Lane0_P I True Signal Link Lane 0
14 H_GND P High Speed Ground
15 AUX_CH_P I True Signal Auxiliary Channel
16 AUX_CH_N I Complement Signal Auxiliary Channel
17 H_GND P High Speed Ground
18 VDD P LCD Logic and Driver Power (3.3V)
19 VDD P LCD Logic and Driver Power (3.3V)
20 VDD P LCD Logic and Driver Power (3.3V)
21 VDD P LCD Logic and Driver Power (3.3V)
22 LCD Self Test I LCD Panel Self Test Enable
23 LCD_GND P LCD Logic and Driver GND
24 LCD_GND P LCD Logic and Driver GND
25 LCD_GND P LCD Logic and Driver GND
26 LCD_GND P LCD Logic and Driver GND
27 HPD O HPD signal pin
28 BL_GND P Backlight GND
29 BL_GND P Backlight GND
30 BL_GND P Backlight GND
31 BL_GND P Backlight GND
32 BL_ENABLE I Backlight ON/OFF
33 BL_PWM_DIM I System PWM
34 NC - Keep Open
35 NC - Reserved for LCD manufacture's use Keep Open
36 VBL P Backlight Power
37 VBL P Backlight Power
38 VBL P Backlight Power
39 VBL P Backlight Power
40 NC - Reserved for LCD manufacture's use Keep Open
Note) P : Power I : Input O : Output
KAOHSIUNG OPTO-ELECTRONICS INC. SHEET
NO. 7B64PS 2709-TX34D200VM0BAA-1 PAGE 9-1/6
9.2 INTERFACE TIMING
9.2.1 Timing Characteristics
Item Symbol Min Typ Max Unit Note VDD 3.3V rise time T1 0.5 - 10 ms
VDD rise to Panel Black op T2 0 - 200 ms VDD rise to HPD high T3 0 - 200 ms
HPD to Link Training Initial T4 -- - -- ms Link training duration T5 -- - -- ms
Link idle T6 -- - -- ms Video data to Display T7 0 - 50 ms
Valid data end to Source power off T10 0 - 500 ms Power fall time T11 0 - 10 ms Power off time T12 500 - -- ms VESA expansion
T13 0.5 - 10 ms VESA expansion T14 0.5 - 10 ms VESA expansion T15 0 - -- ms VESA expansion T16 0 - -- ms VESA expansion T17 0 - -- ms VESA expansion T18 0 - -- ms VESA expansion
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO.
7B64PS 2709-TX34D200VM0BAA-1 PAGE 9-2/6
9.2.2 EEDID_1
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO.
7B64PS 2709-TX34D200VM0BAA-1 PAGE 9-3/6
Field name and commnt Comment
Header
Header
Header
Header
Header
Header
Header
Header
ID Product code 385A
ID Product code
LCD module serial No not enter
LCD module serial No not enter
LCD module serial No not enter
LCD module serial No not enter
Week of manufacture Week - 0
Year of Manufacture Year - 2017
EDID structure version number
EDID revisoin number
Video Input Definition per VESA
Max H image size 29 cm
Max V image size 17 cm
Display Gamma 2.2
Feature support per VESA
Red/Green Low 2 bit RxRy/GxGy
Blue/White Low 2 bit BxBy/WxWy
Red x Rx = 0.644
Red y Ry = 0.325
Green x Gx = 0.303
Green y Gy = 0.599
Blue x Bx = 0.153
Blue y Bx = 0.058
White x Wx = 0.305
White y Wx = 0.320
Established timing 1
Established timing 2
Established timing 3
not use
not use
not use
not use
not use
not use
not use
not use
not use
not use
not use
not use
Standard timng #7 not use
49 31 01 00000001
48 30Standard timng #6
01 00000001
47 2F 01 00000001
46 2EStandard timng #5
01 00000001
45 2D 01 00000001
44 2CStandard timng #4
01 00000001
42 2AStandard timng #3
01 00000001
43 2B 01 00000001
39 27 01 00000001
40 28Standard timng #2
01 00000001
41 29 01 00000001
38 26Standard timng #1
01 00000001
50 32 01 00000001
37 25 00 00000000
34 22 52 01010010
35 23 00 00000000
36 24 00 00000000
32 20 0E 00001110
33 21 4E 01001110
31 1F 27 00100111
29 1D 4D 01001101
27 1B A4 10100100
26 1A 33 00110011
23
25 19 C9 11001001
28 1C 53 01010011
30 1E 99 10011001
24 18 03 00000011
17 78 01111000
22 16 11 00010001
20 14 A5 10100101
21 15 1D 00011101
19 13 04 00000100
18 12 01 00000001
17 11 1B 00011011
16 10 00 00000000
15 0F 00 00000000
14 0E 00 00000000
13 0D 00 00000000
12 0C 00 00000000
11 0B 38 00111000
28 00101000
89
10 0A 5A 01011010
6 06 FF 11111111
7 07 00
9 09
4 04 FF 11111111
3 03 FF 11111111
10001001
11111111
1 01
2 02 FF 11111111
FF 11111111
Byte(Dec)
By te(Hex)
Value(Hex)
Value(Bin)
0 00 00 00000000
00000000
5 05 FF
8 08ID Manufactual name JDI
Establish
ed
Establish
ed
Establish
ed
Establish
ed
Establish
ed
Establish
ed
EEDID_2
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO.
7B64PS 2709-TX34D200VM0BAA-1 PAGE 9-4/6
Field name and commnt Comment
Standard timng #7 not use
not use
not use
Pixel clock/10,000 LSB
Pixel clock/10,000 MSB
H Active pixels (lower 8 bit)
H Blanking pixels (lower 8 bit)
H Active/H Blanking (upper 4 bit)
V Active pixels (lower 8 bit)
V Blanking pixels (lower 8 bit)
V Active/V Blanking (upper 4 bit)
Hsync Offset
Hsync Width
Vsync Offset 48 lines
Vsync Width 8 lines
H picture size (lower 8 bit) 294 mm
V picture size (lower 8 bit) 165 mm
H/V upper 4 bit
H boarder (pixles)
V boarder (Lines)
Pixel clock/10,000 LSB
Pixel clock/10,000 MSB
H Active pixels (lower 8 bit)
H Blanking pixels (lower 8 bit)
H Active/H Blanking (upper 4 bit)
V Active pixels (lower 8 bit)
V Blanking pixels (lower 8 bit)
V Active/V Blanking (upper 4 bit)
Hsync Offset
Hsync Width
Vsync Offset 48 lines
Vsync Width 8 lines
H picture size (lower 8 bit) 294 mm
V picture size (lower 8 bit) 165 mm
H/V upper 4 bit
H boarder (pixles)
V boarder (Lines)
Manufactual name
00100000
00100000
100 64 20 00100000
99 63 20
01001001
98 62 20 00100000
97 61 I 49
01001010
96 60 D 44 01000100
95 5F J 4A
00000000
93 5D FE 11111110
94 5E 00 00000000
00011010
90 5A
ASCII Data Sting Tag
00 00000000
91 5B 00 00000000
89 59 1A
92 5C 00
101 65 20
00 00000000
88 58 0 00 00000000
85 55 A5 10100101
86 56 10 00010000
87 57 0
83 53 0C 00001100
84 54 26 00100110
00100000
82 52 08 00001000
10000000
80 50 8 08 00001000
78 4E 62 3E 00111110
11110000
77 4D 2160 70 01110000
76 4C F0
79 4F 80
81 51 32 20
75 4B 80 50 01010000
74 4A 3840 00 00000000
72 4873 49 A3 10100011
418.09 MHz51 01010001
71 47 1A 00011010
70 46 0 00 00000000
69 45 0 00 00000000
68 44 10 00010000
67 43 A5 10100101
66 42 26 00100110
65 41 0C 00001100
64 40 08 00001000
63 3F 32 20 00100000
62
59 3B 2160 70
08 00001000
62 3E 00111110
3E 8
61 3D 80 10000000
57 39 80 50 01010000
11110000
55 37 CC 11001100
00000000
01110000
58 3A F0
60 3C
56 38 3840 00
00100101
53 35 01 00000001
52 34Standard timng #8
01 00000001
51 33 01 00000001
54 36 522.61 MHzMain clock
25
Byte(Dec)
Byte(Hex)
Value(Hex)
Value(Bin)Preffered timing
Alternative timing
Preffered timing
Alternative timing
Preffered timing
Alternative timing
Preffered timing
Alternative timing
Preffered timing
Alternative timing
Preffered timing
Alternative timing
EEDID_3
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO.
7B64PS 2709-TX34D200VM0BAA-1 PAGE 9-5/6
Field name and commnt Comment
Manufacture P/N
Extension Flag
Checksum
126 7E 00 00000000
127 7F 73 01110011
010000017C 20 00100000
7B A 41
125 7D 20 00100000
124
123
121 79 8 38 00111000
122 7A 5 35 00110101
77 M 4D 01001101
120 78 3 33 00110011
119
75 3 33 00110011
118 76 3 33 00110011
117
73 M 4D 0100110174 1 31 00110001116
115
113 71 L 4C 01001100
114 72 P 50 01010000
11111110
112 70 00 00000000
111 6F
00100000
108 6C
ASCII Data Sting Tag
00 00000000
109
00000000
00000000
00100000
106 6A 20 00100000
107
110 00
6D 006E
FE
105 69
6B
00100000
00100000
104 68 20 00100000
102 66 20
103 67 20
20
20
By te(Dec)
Byte(Hex)
Value(Hex)
Value(Bin)
9.3 eDP Panel Power Sequence Timing
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2709-TX34D200VM0BAA-1 PAGE 9-6/6
VBL
VDD 3.3V
10. OUTLINE DIMENSIONS
10.1 FRONT VIEW
Upper polarizer protective film mark
KAOHSIUNG OPTO-ELECTRONICS INC.SHEET
NO. 7B64PS 2710-TX34D200VM0BAA-1 PAGE 10-1/2
General Tolerance:±0.5mm Scale:NTS Unit:mm
10.2 REAR VIEW
Note 1: Non-specified tolerance +/-0.5mm
Note 2: Outline dimension is measured by caliper
Note 3: Thickness is measured by micro meter
Note 4: Polarizer guarantee area : A.A. +0.5mm
LABEL
CN1
KAOHSIUNG OPTO-ELECTRONICS INC.SHEET
NO. 7B64PS 2710-TX34D200VM0BAA-1 PAGE 10-2/2
General Tolerance:±0.5mm Scale:NTS Unit:mm
11. APPEARANCE STANDARD The appearance inspection is performed in a room around 500~1000 lx based on the conditions as below:
- The distance between inspector’s eyes and display is 30±5 cm.
- The viewing zone is defined with angle shown in Fig. 11.1 The inspection should be performed within 45∘.
11.1 THE DEFINITION OF LCD ZONE
LCD panel is divided into 2 areas as shown in Fig.11.2 for appearance specification in next section. A zone is the LCD active area (dot area); B zone is the area outside of active area 0.5mm.
In terms of housing design, B zone is the recommended window area customers’ housing should be located in, Outside of B zone is C Zone ( cosmetic Specification is not guaranteed ).
A zone
Top frame
0.5mm
B zone
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2711-TX34D200VM0BAA-1 PAGE 11-1/3
Fig. 11.2
C zone
11.2 COSMETIC SPECIFICATION
11.2.1 Visual Inspection criteria Inspection
Item
Acceptance Criteria Remark
Dot Type Average Diameter(mm) *Note 1 Count 1. Use a dot & line gauge
2. Inspected by ND5% filter
3. Distance between two defects
must exceed 15mm
4. Those wiped out easily are
acceptable
5. The LCD glass substrate cannot
be broken
LCD
Foreign Material
Scratch
Bubble
Dent
D ≤ 0.2 Ignore
0.2 < D ≤ 0.35 N ≤ 5
0.35 < D ≤ 0.5 N ≤ 2
0.5 < D 0
Linear Type Width (mm) Length(mm) Count
Foreign Material
Scratch
W ≤ 0.05
L ≤ 3
Ignore
0.05 < W < 0.15 N ≤ 4
0.15 < W 0
Polarizer 1. Polarizer attachment cannot shift (Refer to product specification)
PCB
Assembly
1. Components on PCB assembly cannot be damaged and golden-finger rust/oxidization/corrosion are not
allowed
2. PCB cannot be damaged and the solder defect(missing, broken)is not allowed
Connector 1. Connector surface and pins cannot rust/oxidized/corrode
FPC
1. Dead wrinkle or sharp angle deformation is not allowed
2. The scratch that a finger nail can felt obvious resistance is not allowed
3. Cover film inner impurities spanning two circuits are not allowed
Label 1. Label should part name, date code and series number. (Refer to product specification)
2. Print on the label must clear
Tape
Peeling
L ≤ 50mm Ignored
50mm < L Not allowed
*Note 1:
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2711-TX34D200VM0BAA-1 PAGE 11-2/3
11.2.2 Electrical Inspection criteria Inspection
Item Acceptance Criteria
Remark Type Maximum
Dot defect
Bright dot 5 1. Ambient Illumination 500 Lux 2. Inspected by ND 5% filter 3. Distance between eyes and LCD:30 cm 4. Display test pattern white raster L255 / black raster L0
Two adjacent bright dots 1 Dark dot 5 Two adjacent dark dots 2
Distance Between two bright dots
10mm ≤ L
Between two dark dots
5mm ≤ L
Line defect Any horizontal and vertical line defect is not allowed under any pattern Block defect
Any horizontal and vertical block defect is not allowed under any pattern
Backlight Module
Backlight can’t light up or show obvious brightness unevenness with spot-light or darker zone considered as defect
White Screen
No display or white screen is a defect
Flicker Not allowed to appear under agreed test patterns or judged by limit sample White Spot Invisible through a 5% ND filter
Strip Brightness uniformity appeared by strips is not allowed Newton’s
Rings Not allowed under the agreed test patterns or judged by a limited sample
Mura Invisible through a 5% ND Filter
11.2.3 Electrical Inspection criteria
Inspection
Item Acceptance Criteria Remark
Luminance
Refer to product specification Chrominance
Contrast
Uniformity
Note 1:The inspection method with ND Filter is to hold it in front of the panel around 1 cm and inspect the
panel with 30±5 cm distance for 1 second.
Note 2:Extraneous substances which can be wiped out, like finger print, dust, particles are not considered
as a defect.
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2711-TX34D200VM0BAA-1 PAGE 11-3/3
30cm±5
12. PRECAUTIONS
12.1 PRECAUTIONS of ESD
1) Before handling the display, please ensure your body has been connected to ground to avoid any damages by ESD. Also, do not touch display’s interface directly when assembling.
2) Please remove the protection film very slowly before turning on the display to avoid generating ESD.
12.2 PRECAUTIONS of HANDLING
1) In order to keep the appearance of display in good condition, please do not rub any surfaces of the displays by sharp tools harder than 3H, especially touch panel, metal frame and polarizer.
2) Please do not pile the displays in order to avoid any scars leaving on the display. In order to avoid any injuries, please pay more attention for the edges of glasses and metal frame, and wear finger cots to protect yourself and the display before working on it.
3) Touching the display area or the terminal pins with bare hand is prohibited. This is because it will stain the display area and cause poor insulation between terminal pins, and might affect display’s electrical characteristics furthermore.
4) Do not use any harmful chemicals such as acetone, toluene, and isopropyl alcohol to clean display’s surfaces.
5) Please use soft cloth or absorbent cotton with ethanol to clean the display by gently wiping. Moreover, when wiping the display, please wipe it by horizontal or vertical direction instead of circling to prevent leaving scars on the display’s surface, especially polarizer.
6) Please wipe any unknown liquids immediately such as saliva, water or dew on the display to avoid color fading or any permanently damages.
7) Maximum pressure to the surface of the display must be less than 410 x 1.96 Pa. If the area of adding pressure is less than 1 2cm , the maximum pressure must be less than 1.96N.
12.3 PRECAUTIONS OF OPERATING
1) Please input signals and voltages to the displays according to the values defined in the section of electrical characteristics to obtain the best performance. Any voltages over than absolute maximum rating will cause permanent damages to this display. Also, any timing of the signals out of this specification would cause unexpected performance.
2) When the display is operating at significant low temperature, the response time will be slower than it at 25 C . In high temperature, the color will be slightly dark and blue compared to original pattern. However, these are temperature-related phenomenon of LCD and it will not cause permanent damages to the display when used within the operating temperature.
3) The use of screen saver or sleep mode is recommended when static images are likely for long periods of time. This is to avoid the possibility of image sticking.
4) Spike noise can cause malfunction of the circuit. The recommended limitation of spike noise is no bigger than 100 mV.
KAOHSIUNG OPTO-ELECTRONICS INC. SHEET
NO. 7B64PS 2712-TX34D200VM0BAA-1 PAGE 12-1/2
12.4 PRECAUTIONS of STORAGE
If the displays are going to be stored for years, please be aware the following notices.
1) Please store the displays in a dark room to avoid any damages from sunlight and other sources of UV light.
2) The recommended long term storage temperature is between 10 C ~35 C and 55%~75% humidity to avoid causing bubbles between polarizer and LCD glasses, and polarizer peeling from LCD glasses.
3) It would be better to keep the displays in the container, which is shipped from KOE, and do not unpack it.
4) Please do not stick any labels on the display surface for a long time, especially on the polarizer.
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2712-TX34D200VM0BAA-1 PAGE 12-2/2
13. DESIGNATION of LOT MARK 1) The lot mark is showing in Fig.13.1. First 4 digits are used to represent production lot, T represented
made in Taiwan, and the last 6 digits are the serial number.
Fig. 13.1
2) The tables as below are showing what the first 4 digits of lot mark are shorted for.
3) Except letters I and O, revision number will be shown on lot mark and following letters A to Z.
4) The location of the lot mark is on the back of the display shown in Fig. 13.2
Fig. 13.2
Year Mark
2018 8
2019 9
2020 0
2021 1
2022 2
Month Mark Month Mark
1 01 7 07
2 02 8 08
3 03 9 09
4 04 10 10
5 05 11 11
6 06 12 12
Week (Days) Mark
1~7 1
8~14 2
15~21 3
22~28 4
29~31 5
8 0 4 4 T 0 0 0 0 0 1
T : Made in Taiwan Serial number
Week
Month
Year
KAOHSIUNG OPTO-ELECTRONICS INC. SHEETNO. 7B64PS 2713-TX34D200VM0BAA-1 PAGE 13-1/1
Label example: