uni-pak 1912/1610€¦ · ( with sleeves in the top pack) with return collar : customer return loop...
TRANSCRIPT
Uni-Pak® 1912/1610Optimal ReturnLogistics Solution
High Return RatioBespoke HeightsHigh Impact ResistanceGood Weight to Strength RatioMade to Measure Solutions
* Internal Dimensions are based on a sleeve of 10 mm / 3000gr/m² ** based on a sleeve of 10 mm / 3000gr/m² and evenly distributed loads.Sleeve options: compatible with all available sleeve options (PP and cardboard). Return Colar available in 1 height. Hinged lid available
Uni-Pak® 1912 (1900x1200x795 mm)
42 packs inbound / full standard truck 154 packs outbound / folded standard truck
www.ducaplast.com - [email protected] DS Smith Ducaplast - Zone d’Entreprises de la Kruys Straete, 59470 Wormhout - France - Tél. : +33 (0)3 28 65 98 90 - Fax : +33 (0)3 28 65 98 99The information contained in this document is for information purposes and is non-contractual. The manufacterer reserves the right to change the product and its technical characteristics. This information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. DS SMITH DUCAPLAST SAS au capital de 4 200 000 - RCS DUNKERQUE B 383 474 046 SIRET 383 474 046 00018
A B C D E F G K L M
1900x1200 180 640 960 1426 180 690 100 320 338 129
1600x1000 165 - - 795 170 700 100 - - -
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 5
TRANSPORT & LOGISTICS1
Specifications 1900 mm x 1200 mm x 790 mm
(without return collar)
1900 mm x 1200 mm x 790 mm
(with return collar)
Sta
nd
ard
lo
rry
hp
ack
<7
90
mm
Transport to customer
with sleeve
without sleeve
14x11 = 154
14x22 = 308
14x7 = 98
Transport when pack is erected 14x3 = 42 14x3 = 42
Transport with consolidated
packs ∅ 14x7 = 98
Ratio 3,6 2,3
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 154 packs per lorry
Consolidated packs: Sleeves are in
the erected pack.
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 with Return Collar (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 98 packs per lorry
Consolidated packs with return
collar: the sleeve is between the
pallet and the lid Maxi 6/1.
1 All the following data is calculated with utilisation of an “M” folded sleeve and without hinge (on the lid).
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 2
Consolidated packs for transport:
As delivered to the customer
(sleeves separate)
Customer return loop ( with sleeves in the top pack)
With Return Collar : Customer
return loop
& as delivered to the customer
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 2
Consolidated packs for transport:
As delivered to the customer
(sleeves separate)
Customer return loop ( with sleeves in the top pack)
With Return Collar : Customer
return loop
& as delivered to the customer
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 2
Consolidated packs for transport:
As delivered to the customer
(sleeves separate)
Customer return loop ( with sleeves in the top pack)
With Return Collar : Customer
return loop
& as delivered to the customer
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 5
TRANSPORT & LOGISTICS1
Specifications 1900 mm x 1200 mm x 790 mm
(without return collar)
1900 mm x 1200 mm x 790 mm
(with return collar) S
tan
da
rd l
orr
y
hp
ack
<7
90
mm
Transport to customer
with sleeve
without sleeve
14x11 = 154
14x22 = 308
14x7 = 98
Transport when pack is erected 14x3 = 42 14x3 = 42
Transport with consolidated
packs ∅ 14x7 = 98
Ratio 3,6 2,3
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 154 packs per lorry
Consolidated packs: Sleeves are in
the erected pack.
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 with Return Collar (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 98 packs per lorry
Consolidated packs with return
collar: the sleeve is between the
pallet and the lid Maxi 6/1.
1 All the following data is calculated with utilisation of an “M” folded sleeve and without hinge (on the lid).
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 5
TRANSPORT & LOGISTICS1
Specifications 1900 mm x 1200 mm x 790 mm
(without return collar)
1900 mm x 1200 mm x 790 mm
(with return collar)
Sta
nd
ard
lo
rry
hp
ack
<7
90
mm
Transport to customer
with sleeve
without sleeve
14x11 = 154
14x22 = 308
14x7 = 98
Transport when pack is erected 14x3 = 42 14x3 = 42
Transport with consolidated
packs ∅ 14x7 = 98
Ratio 3,6 2,3
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 154 packs per lorry
Consolidated packs: Sleeves are in
the erected pack.
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 with Return Collar (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 98 packs per lorry
Consolidated packs with return
collar: the sleeve is between the
pallet and the lid Maxi 6/1.
1 All the following data is calculated with utilisation of an “M” folded sleeve and without hinge (on the lid).
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 5
TRANSPORT & LOGISTICS1
Specifications 1900 mm x 1200 mm x 790 mm
(without return collar)
1900 mm x 1200 mm x 790 mm
(with return collar)
Sta
nd
ard
lo
rry
hp
ack
<7
90
mm
Transport to customer
with sleeve
without sleeve
14x11 = 154
14x22 = 308
14x7 = 98
Transport when pack is erected 14x3 = 42 14x3 = 42
Transport with consolidated
packs ∅ 14x7 = 98
Ratio 3,6 2,3
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 154 packs per lorry
Consolidated packs: Sleeves are in
the erected pack.
Sample loading for a standard lorry (13,4 x 2,4 x 2,5 m)
UP19x12 with Return Collar (1900 x 1200 x 790 mm)
trucks for the outward ‐ 42 packs per lorry
Erected packs ‐ Maxi 2/1.
trucks for the return ‐ 98 packs per lorry
Consolidated packs with return
collar: the sleeve is between the
pallet and the lid Maxi 6/1.
1 All the following data is calculated with utilisation of an “M” folded sleeve and without hinge (on the lid).
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 2
Consolidated packs for transport:
As delivered to the customer
(sleeves separate)
Customer return loop ( with sleeves in the top pack)
With Return Collar : Customer
return loop
& as delivered to the customer
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 2
Consolidated packs for transport:
As delivered to the customer
(sleeves separate)
Customer return loop ( with sleeves in the top pack)
With Return Collar : Customer
return loop
& as delivered to the customer
TECHNICAL DATA MANUAL V1.0 04/01/2012
Author B.Vandecasteele
Validated by
The information contained in this document is for information purposes only and is non‐contractual. The manufacturer reserves the right to change the product and its technical
characteristics without notification. The information has been supplied in good faith and does not in any way constitute a guarantee for specific conditions of use. 2
Consolidated packs for transport:
As delivered to the customer
(sleeves separate)
Customer return loop ( with sleeves in the top pack)
With Return Collar : Customer
return loop
& as delivered to the customer
Uni-Pak® 1900x1200 1600x1000
Outside dimensions L x W x H in mm L x W x H in mm
Small 1900x1200x750 1600x1000x750
Large 1900x1200x995 1600x1000x995
Internal dimensions* L x W x H in mm L x W x H in mm
Small 1830x1130x542 1530x930x545
Large 1830x1130x787 1530x930x790
Weight pallet 20,7 kg 12,8 kg
Weight lid 12,7 kg 9 kg
Volume small 1120 l 775 l
Volume large 1627 l 1124 l
Dynamic load** 350 kg 350 kg
Static load** 1000 kg 1000 kg