United Aeronautical Corp. Página 1 2017-08-23

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CANYON BOULEVARD • NORTH HOLLYWOOD, CA 91605-3710

TEL: 818-764-2102 • FAX: 818-764-2115 www.unitedaero.com

UNITED AERONAUTICAL CORPORATION

(“UAC”) Lista de Capacidades

INFORMACIÓN GENERAL: - UAC ha sido un fabricante y proveedor aeroespacial activo

por más de 56 años, proporcionando partes y servicios a países y organizaciones (Militares y Civiles) en todo el mundo.

- Mantenemos una gran variedad de talleres, incluyendo hidráulica, electromecánica, eléctrica, tren de aterrizaje y taller reparador de metal mecánica.

- Una sala de pintura con el ultimo sistema de filtración ambiental aprobado para la pintura de Poliuretano, Epoxy y Teflon en sitio en el cual se utiliza para la agilización de las entregas de las partes.

- Certificados por los siguientes sistemas de control de calidad; ISO 9001, FAA Y EASA.

- Licenciante de Northrop Grumman, único titular de las aviones C1, S2 y E1.

- Licenciante de Hamilton Standard, titular en una variedad de componentes.

- Un licenciatario de Honeywell para distintos componentes de la llantas y del tren de aterrizaje.

- Mantenemos un inventario controlado por computadora, que consta de más de 500,000 artículos, en dos estados.

- Tenemos 150,000 metros de instalaciones de producción y almacenaje.

- Más de 50 hectareas en nuestras instalaciones de Tucson, Arizona con aproximadamente 150 aviones.

- Una biblioteca completa con datos e información técnicas: tenemos aproximadamente 2,000,000 de dibujos para varios aviones para fabricación, incluyendo herramientas.

- Registrados con el Departamento del estado para la exportación.

- Licencia abierta y licencia de exportación. - Mantenemos una completa biblioteca de orden técnica (T.O.), que abarca varias aeronaves y sistemas.

- Poseemos una gran variedad de herramientas necesarias para la fabricación de diferentes modelos de avión.

United Aeronautical Corp. Página 2 2017-08-23

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CANYON BOULEVARD • NORTH HOLLYWOOD, CA 91605-3710

TEL: 818-764-2102 • FAX: 818-764-2115 www.unitedaero.com

- Establecimos relaciones comerciales sobre los temas estructurales más grandes con diversas empresas.

CAPACIDADES INDUSTRIALES: - Compuesto formador usando acero, kirksite o epoxi

colorante formador - Prensa hidráulica formador - Prensa de goma formador - Frenos de metal doblados de 8 metros y 12 metros - Tornos, molinos y prensas de taladro - Capacidades de mecanizdo CNC internas - Cizallas de metal 4 metros y 12 metros con un 3/8 de

espesor de corte - Heli-arco de la soldadura de acero, acero inoxidable y

aluminio - Muescadora Amanda y Perforadora de Radio - Fabricación propia de tintes sellado y corte - Fabricante de Bujes, tuberia, pliegue de línea, etc. en el

sitio - Fabricación de montaje de cable en el sitio CAPACIDADES DE OVERHAUL: - Mantener los instrumentos y equipos necesarios para las

pruebas funcionales de una variedad de piezas. - Nuestras capacidades de overhaul de frenos se divide en 3

áreas: a) metal mecanica, b) hidráulico, y c) mecánico - Todos los instrumentos se calibran de acuerdo con

ANSI/NCSL z540, ISO 9002 & MIL STD 45662A y normas internacional o de consenso.

- De conformidad con ISO/IEC 17025 y ISO 9001-2000 Taller Electro-Mecánico CAPACIDADES DE OVERHAUL: - Actuadores lineales y rotativos - Alzamiento de rescate electrico - Freno magnetico - Bomba del combustible - Motores (ambos AC y DC) - Valvulas de Aceite y combustibles (controles generales,

Whittaker etc.) - Parabrisas, actuadores, cajas de engranajes (42 grados,

90 grados, etc.)

United Aeronautical Corp. Página 3 2017-08-23

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CANYON BOULEVARD • NORTH HOLLYWOOD, CA 91605-3710

TEL: 818-764-2102 • FAX: 818-764-2115 www.unitedaero.com

- Inspección de varios engranajes - Inspección Fluorescente o magnético - Ventilador y motor de asiento - Actuadores lineales - Relojes - Ventiladores - Interruptores - Termostatos - Turbinas - Cajas de Empalmes - Estantes de Bombas - Lanzadores - Receptores - Transmisores - Arrancadores - Controles de tren de aterrizaje - Las unidades de Refrigeración - Cuerda Elásticas TALLER HIDRÁULICO: CAPACIDADES DE EQUIPO DE PRUEBA: - Prueba de Resistencia hidráulica hasta 10.000 PSI, Flujo

hasta 25 GPM. - Prueba de Resistencia neumática hasta 6000 PSI. - Resistencia de fuerza hasta 140.000 lbs.

Inserción/extracción. CAPACIDADES DE OVERHAUL: - Equipo de frenos de aterrizaje principal - Equipo de amortiguadores de aterrizaje - Equipo de amortiguadores de aterrizaje traseras - Equipo de ruedas de aterrizaje principal - Llantas traseras - Equipo de amortiguadores de aterrizaje de nariz - Ruedas de nariz - Dispositivo del puntal del amortiguador traseras - Actuadores de seguro de la plataforma de lanzamiento - Montaje del conjunto de valvulas - Válvula solenoide - Freno del rotor - Colector de aire de purga - Check Valves y restrictores - Valvulas selectoras

United Aeronautical Corp. Página 4 2017-08-23

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CANYON BOULEVARD • NORTH HOLLYWOOD, CA 91605-3710

TEL: 818-764-2102 • FAX: 818-764-2115 www.unitedaero.com

- Colector de retorno hidráulicos - Válvulas de alivio - Resistencia aerodinámica del seguro de nariz y principal - Botella y valvula de expulsión del tren de aterrizaje de

emergencia. - Acumuladores - Bombas hidráulicas manuales - Válvulas hidráulicas de arranque - Reguladores de flujo - Filtros en línea - Válvula selector de la plataforma - Válvula de arranque APU - Actuador plataforma de la válvula de secuencia de la

plataforma - Actuador de la puerta de plataforma - Limpiador de parabrisas (bomba, motor y depósito) - Cajas principal de engranaje, motor e intercambiadores de

calor hidráulico - Tanque de aceite auxiliar - Barras de control - Bell cranks - Rodillos intermedios - Embalses - Cilindros - Válvulas-servo Metal Mecanica – capacidades de overhaul: - Alerones - Elevadores - Listones - Control de superficies - Aletas - Timones - Ventana de piloto y co-piloto - Puerta del personal - Ventana de escape de emergencia - Conjunto puerta de nariz - Pestillo y puerta de gancho de carga - Puerta de la nariz - Puerta del compartimento Electronica (LH & RH) - Canopies - Ventanas de cabina del piloto y co-piloto

United Aeronautical Corp. Página 5 2017-08-23

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CANYON BOULEVARD • NORTH HOLLYWOOD, CA 91605-3710

TEL: 818-764-2102 • FAX: 818-764-2115 www.unitedaero.com

- Puertas de entrada, escape y puertas de acceso de la cabina

- Equipo de puertas de aterrizaje y puertas de bombas y torpedos

- Tubos de torsión - Ductos - Asientos de cabina (piloto y co-piloto) - Asientos de cabina Aviones soportados: -Dentro de más de 200,000 metros cuadrados de almacenes y fábricas, UAC apoya / mantiene piezas, servicio de reparación, datos técnicos y las capacidades de fabricación aplicables a las siguientes aeronaves y equipos:

A-7 Corsair A-10 Thunderbolt II A/C-47 Skytrain (DC-3) A-37 Dragonfly AV-8 Harrier Beachcraft B-52 Stratofortress C-1 Trader C-2 Greyhound C-5 Galaxy C-130 Hercules C-135 Stratotanker E-1 Tracer E-2 Hawkeye E-3 Sentry EA-6B Prowler Fairchild/M7 F-4 Phantom F-5 Tiger F-15 Eagle F-16 Fighting Falcon F/A-18 Hornet P-3 Orion S-2 Tracker T-2 Buckeye T-34 Mentor T-37 Tweet T-38 Talon Bell Helicopters (204, 205, 206, 212, 412, H1) Boeing Helicopters Sikorsky Helicopters (H3, H53, H60, S70)

United Aeronautical Corp. Página 6 2017-08-23

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CANYON BOULEVARD • NORTH HOLLYWOOD, CA 91605-3710

TEL: 818-764-2102 • FAX: 818-764-2115 www.unitedaero.com

Kaman Helicopters (H2) Engines: J52, J79, J69, J85, F100, T56, T53, Allison 250, various PT6 models, R1820, JT8D, CFM56 ...... y muchas mas ...

WWW.UNITEDAERO.COME-MAIL: UAC@UNITEDAERO.COMPHONE:+1 818-764-2102FAX :+1 818-764-2102

UNITED AERONAUTICAL CORP.7360 LAUREL CANYON BLVD.NORTH HOLLYWOOD CA 91605-3790USA

Announcing the purchase of Aero Union Corporations assets, including 8 P3 aircraft and the Intellectual Property for the MAFFS and MAFFSII systems

Specializing in Supplying a4, S2,P3, C1, C130, F5 Parts and Maintenance

Chairman, CEO, Treasurer & Accountable Manager

President & COO --,------I I I Secretary

OFF SITE EMPLOYEES I L_ ASSISTANT I I

SACRAMENTO I ~-----------------------SUPERVISOR f----- Vice President

SACRAMENTO Quality Manager, MECHANICS

----------------TUCSON ~----- --------------

SUPERVISOR f-- I I I I DIRECTOR OF

I OPERATIONS QUALITY INSPECTORS

QUALITY PARTS PULLERS I I ADVISOR CLERKS

I I I I I -------------~------1

I I

-I

S/R SHOP I Warehouse Office Manager Contracts IT TECH.

SUPERVISOR _J Manager H/R Manager f-- Administrator SUPERVISOR

I I PRODUCTION I

~ PLANNER

PARTS Receptionist Contracts

Packagers Assistant PULLERS t---

r I I SM LEAD HSLEAD EM LEAD Maintenance

-MAN MAN MAN Mechanics RECORDS CLERKS f--

I

MECHANICS MECHANICS MECHANICS

JA.TOR t---

PAINTERS BILLING

t---

Decem her 11,1000

QUALITY SYSTEM QUALIFICATION

Based on a quality system evaluation,

United Aeronautical Corporation is hereby considered compliant with

Mil-l-452 SA I ,.

'1U . I ?t .,./

DIANE VOl EKMAN CAPT, USN Commander

U.S. SMALL BUSINESS ADMINISTRATIONWASHINGTON, DC 20416 Original

CertificationDate:05/11/2017

Lawrence Holt - CeoUNITED AERONAUTICAL CORPORATION7360 LAUREL CANYON BLVD,North hollywood, CA, 91605-3710

Dear Lawrence Holt:

Congratulations! . . . Welcome to the HUBZone Program!

I am pleased to advise you that effective this date, UNITED AERONAUTICAL CORPORATION has been approved for certification as a "qualified HUBZone small businessconcern (SBC)". The firm is now eligible for HUBZone opportunities and will be included on the list of qualified HUBZone small business concerns found athttp://dsbs.sba.gov/dsbs/search/dsp_searchhubzone.cfm. This certification will remain in effect unless SBA later determines that the firm does not meet the eligibilityrequirements of the program or the firm submits a voluntary decertification form. The information below sets forth facts concerning the company's continued eligibility and itsresponsibilities.

The Firm's Responsibi l i ties as a HUBZone cer ti fied concern

As a HUBZone certified concern, the program benefits the firm may receive come with important responsibilities, including:

Keeping up-to-date on the HUBZone geographical designations by visi ting the HUBZone websi te at http://www.sba.gov/content/hubzone-maps.

Check SBA’s HUBZone mapping pages to determine whether changes in HUBZone area designations impact, or will impact, the firm’s eligibility. Note that changes ingeographical designations may critically affect the firm’s compliance with Program requirements that its principal office be located in a HUBZone, and/or that at least35% of its employees reside in a HUBZone.Sign up to receive HUBZone News Updates by entering your email address at https://public.govdelivery.com/accounts/USSBA/subscriber/new. Once there, expandthe “SBA Initiatives” subscription topic, select HUBZone News, and click “Next.” This is the simplest single step you can take to keep current on key programchanges that may affect the firm’s eligibility

Remaining in compl iance at al l times and staying updated on Program changes. It is the firm's responsibility to continually ensure that it meets the requirementsof the Program. This includes, for example, continuously meeting the 35% HUBZone residency requirement. The firm can make good faith efforts to "attempt tomaintain" (see definition at 13 C.F.R. § 126.103) having 35% of its employees reside in a HUBZone during the performance of a HUBZone contract it received (as aprime, not as a subcontractor). But, the business must meet this residency requirement anytime it submits an offer on and receives a new HUBZone contract. Thisalso includes complying with contract performance requirements in connection with any HUBZone contracts awarded to the firm as a qualified HUBZone SBC (e.g.,the subcontracting limitations requirements set forth in 13 C.F.R. § 126.700, and/or the non-manufacturer rule set forth in 13 C.F.R. § 126.601(e)).

Informing the HUBZone Program of any mater ial changes to the concern. If there are material changes to the concern that may affect its continued eligibility, youmust notify the HUBZone Program by sending an e-mail to HZMCN@sba.gov. Material changes include a change in name, size, ownership, business structure, orprincipal office location, in addition to falling below the 35% employee HUBZone residency requirement when the firm is not performing on a HUBZone contract. Failureto notify the HUBZone Program of material changes may result in decertification from the program. If at any time the concern no longer qualifies for the HUBZoneProgram, the individual authorized to represent the firm can complete the "Voluntary Decertification Agreement" available at http://www.sba.gov/content/maintaining-hubzone-certification.

Note: The HUBZone Program sends notices regarding program examinations, proposed decertifications, and re-certifications to the firm's physical and emailaddresses of record. If the firm fails to respond to these notices because the firm relocated without updating its SAM and DSBS profiles and informing the HUBZoneProgram, SBA will propose the firm for decertification and may subsequently decertify it from the Program. Therefore, it is critical that you check your email's SPAMfolder to make sure that you are receiving emails from SBA, notify us of any change in the physical address and keep the firm's SAM and DSBS profiles current.

Par ticipating in SBA el igibi l i ty moni tor ing ini tiatives. In order to ensure the integrity of the Program, firms will be required to recertify their status and may besubject to program examinations, proposed decertifications, or protests designed to verify eligibility, including:

SBA requiring the concern to certify in writing under penalty of perjury that it continues to meet all the eligibility criteria of the HUBZone Program orvoluntarily decertifySBA requiring the concern to submit updated documentation, similar to the information and documents you provided for the firm to obtain initial certification,in order to verify that it remains eligible for the program.SBA requiring the concern to demonstrate that it was eligible for the Program both at the time of its initial offer and award of a HUBZone contract.SBA making unannounced site visits to any or all of the concern's locations to verify the accuracy of any information provided to SBA.

Keeping the fi rm’s System for Award Management (SAM) and Dynamic Smal l Business Search (DSBS) records up-to-date. To apply for HUBZone Programcertification, the firm had to be registered in SAM and DSBS. For the firm to receive benefits from the HUBZone Program (i.e., to be identified by contracting officersas eligible to receive HUBZone contracts and to be paid under any such contracts), these records must remain up-to-date. You must validate the firm’s information atleast annually or its SAM registration will become inactive. If you need assistance in updating the firm’s SAM or DSBS information, please go to the SAM Help Deskat https://fsd.gov/fsd-gov/home.do.

Misrepresentation: By bidding on any Federal solicitation that is set-aside or reserved only for HUBZone SBCs or for which a HUBZone preference will be applied,the firm's submission of that offer is deemed to be a representation to the United States that the company is fully in compliance with the HUBZone regulatoryrequirements, and that there have been no material changes since it received the HUBZone certification. ANY SBC FOUND TO MISREPRESENT ITS HUBZONESTATUS IN OBTAINING SUCH AN AWARD MAY BE SUBJECT TO A RANGE OF CIVIL OR CRIMINAL PENALTIES, TREBLE DAMAGES UNDER THE FALSE CLAIMSACT, AND/OR SUSPENSION OR DEBARMENT FROM FEDERAL CONTRACTING.

How to get the most out of the Program

Although the firm's status as a certified HUBZone SBC greatly improves its access to Federal awards, this certification does not guarantee contract awards. Yourability to research opportunities and competitively bid on them will be the key to your success in this program. I recommend you utilize the following additional webresources designed to help you maximize the Program's benefits:

SBA's Government Contracting Classroom website at (http://www.sba.gov/gcclassroom) provides valuable information on Federal contracting. Please notethat while your concern was approved under the primary North American Industry Classification System (NAICS) Code found in your firm's SAM and DSBSprofiles, you may be awarded contracts under other NAICS Codes. You may benefit from researching and identifying potential HUBZone contractingopportunities outside your profile's NAICS code.Federal Business Opportunities (https://www.fbo.gov/) serves as a central listing for Federal procurement solicitations to the public.The FederalProcurement Data System is a database accessible to the public at no cost and you may use it to learn about contract awards to businesses in varioussocioeconomic categories, including HUBZone.www.USAspending.gov is a single searchable website, accessible to the public at no cost, which includes for each Federal award: the name of the entityreceiving the award; the amount of the award; information on the award including transaction type, funding agency, etc.; and the location of the entityreceiving the award.

SBA's Surety Bond Guarantee program (SBG) website (www.sba.gov/osg) provides information on how to apply for an SBA surety bond guarantee and alisting of participating sureties and agents. For immediate questions, please call 202-205-6540. The SBG program guarantees bid, performance andpayment bonds for individual private or public contracts up to $6.5 million, and up to $10 million with a federal contracting officer’s certification that thebond guarantee is necessary, for small and emerging contractors having difficulties obtaining surety bonds through regular commercial channels.

Thank you for contr ibuting to US economic development

We wish you the best of luck as a HUBZone certified concern - your success will help improve the economic future of the HUBZone(s) in which the firm operates. Ifat any time you have any questions about the Program or how the SBA may be able to support your business objectives, the HUBZone Office offers assistance viaan interactive conference call where we can respond to general questions and concerns in real-time. Visit our website at http://www.sba.gov/hubzone, for additionalinformation or contact the HUBZone Help Desk at HUBZone@sba.gov

Sincerely,

Mariana Pardo DirectorOffice of HUBZone Program

HUBZone Certi fication Number: 57378

Ref: IAF-19L

Place and date:

For the issuing office: Katy, TX, 18, March, 2015 DNV GL – Business Assurance

1400 Ravello Drive, Katy, TX, 77449-5164, USA

John C. Stefan

Management Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance B.V., ZWOLSEWEG 1, 2994 LB, BARENDRECHT, NETHERLANDS. TEL:+31102922689. www.dnvba.com

Certificate No:CERT-05118-2006-AQ-HOU-RvA

Initial certification date:10, April, 2003

Valid:08, April, 2015 - 08, April, 2018

This is to certify that the management system of

United Aeronautical Corporation7360 Laurel Canyon Boulevard, North Hollywood, CA 91605 USA

has been found to conform to the Quality Management System standard:

ISO 9001:2008

This certificate is valid for the following scope:

The Procurement, Sales, Distribution, New Manufacture, Overhaul, Reverse Engineering and Modification of Military and Commercial Aircraft Spare Parts.

1

AS9120 ‘A” QUALITY SYSTEM COMPLIANCE

Quality Management Systems - Requirements for Stocking Distributor Space and Defense Organizations

AWARDED TO

United Aeronautical Corporation FOR COMPLETION OF QUALITY SYSTEM IMPLEMENTATION:

SECTION 4 GENERAL REQUIREMENTS SECTION 5 MANAGEMENT RESPONSIBILITY, SECTION 6 RESOURCE MANAGEMENT, SECTION 7 PRODUCT REALIZATION, SECTION 8 MEASUREMENT ANALYSIS

AND IMPROVEMENT, WITH ADDITIONAL INSTRUCTION ON DOCUMENTATION, TRAINING, PROCESS MONITORING, QUALITY RECORDS, AND THE MANAGEMENT OF THE QUALITY SYSTEM

September 6, 2012

Jose C. Collado Jose C. Collado President

Certificate Number 99121: Expires March 6, 2014

4814 Astuto Drive- Palmdale, CA 93551-Phone: 661-206 8529 Email: Rcollado@AOL.Com

European Aviation Safety Agency

APPROVAL CERTIFICATE

REFERENCE EASA.145.6016

Taking into account the provisions of Article 9(2) of Regulation(EC) 1592/2002 of the European Parliament and of the Council and the bilateral agreements currently in force between European Union Member States and the Government of the United States of America, the European Aviation Safety Agency (EASA) hereby certifies:

UN ITED AERONAUTICAL CORPORATION

FAA NUMBER: PY3R780L

7360 Laurel Canyon Boulevard North Hollywood, CA 91605-3710

USA

as a Part-145 maintenance organisation approved to maintain the products listed in the FAA Air Agency Certificate and associated Operations Specifications and issue related certificates of release to service using the above reference, subject to the following conditions:

1. The scope of the approval is limited to that specified on the FAR Part 145 repair station Air Agency Certificate, and the associated Operations Specifications for work carried out in the USA (unless otherwise agreed in a particular case by EASA).

2. This approval requires continued compliance with FAR Part 145 and the differences as specified in the Maintenance Implementation Procedures, including the use of the FAA Form 8130-3 for release/return to service of components up to and including powerplants.

3. Certificates of return to service must quote the EASA Part-145 approval reference number quoted above and the FAR Part 145 Air Agency Certificate number.

4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration until the approval is surrendered, superseded, suspended or revoked.

::e:f issue ~Oifember 2006

ForEASA ..,

UNITED STATES OF AMERICA

DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION

~ir ~gencp ~ertificate PY3R780L

3'lu<v ,oe#cal:e' ,u, ,iuued ,0;

UNITED AEROOAUTICAL COOPORATIOO

,wh)jf?/ ,b.ll<Jinealv,~',iv 7360 Laurel canyon Boulevard

North Hollywood, California 91605-3790

afww jlndin/1' £hat ,r.:tJ/ ,o7ani;J"-dion' ,(XJ/mftlt'e:i' ,in' all /JCeli,ftecl!v

,witk £he, /Jl~iJ<mnentJ_, ,of,tk ffede'l(Zb ~iatiow !?lk!lulatiom

~tim!/' MY Ike· RdaMiJh-r.nenl' ,o/ an· sd,:,v ~en~; ,and ,u,

,emfwwe11'ed £<;' ,o~ an' -aftjwt()/'I,M'3d Repair Station

Limited Airframe

Accessory

3Z_u, ,ce1ll¥'u:ate; anleM- ,canceled; 4U!iftended; ,o?<' ,1/'ev,okd,

4ha/t ~inUf?/ ,in' ~ct indefinitely.

PAil'~ .o/ /k~~

a~;.~ January 5, 1990 ~osffi?H:/.j.Yf3uooo, Manager

Reissued: March 19, 1992 Van Nuys FSOO, Western-Pacif~c Reg~on t:his Q:mifi[Q[t is DOt t:ronsftrGblt, AND ANY MAJOR CHANGE IN l!IE BASIC fACILITIES, OR IN l!IE LOCATION lliEREOf, SHALL BE IMMEDIATELY REPORTED TO THE APPROPRIATE REGIONAL OFFIC£ OF THE FEDERAL AVIATION ADMINISTRATION

Any alteration of this certificate is punishable by a fine of not exceeding $1.000, or imprisonment not exceeding 3 years, or both

FAA Form 8000-4 (1-67) SUPERSEDES FAA FORM 390.

El PROVEEDOR: UNITED AERONAUTICAL CORPORATION

HA SIDO CALIFICADO COMO

I X I SIN LIMITACIONES I I CON UMITACIONES

PARA PROVEER (Descripci6n del producto y/o servicio a proveer)

I I NO APROBAOO

FABRICACI6N, MANTENIMIENTO Y MODIFICACI6N DE ROT ABLES DE AVIONES

MIUTARES (A4 Y C130)

PERTENECIENTES A:

I X I GRUPO I

I I GRUPO II

CODIGO DE PROVEEDOR: U0603 I OEU07

I coMP. cRmco

INCLUIDO EN EL LIST ADO DE PROVEEDORES CALIFICADOS

DESDE: MAYO 2005. HAST A : MAYO 2008.

ESTO. E:.SONNEAU ::..-qge INGEHi"ERIA ~· "tAl10A1l

FECHA Y FIRMA JEFATURA INGENIERIA DE CAUDAD

Qrk~-? FECHA y FIRMA GERARDO A. IARTIIIf.Z GERENTE DE CALIDADGIIIIMf! 111! CAUDAD

DISTRIBUTORS, INC.

November 13, 2009

Bradford Beck United Aeronautical Corp 7360 Laurel Canyon Blvd North Hollywood, CA 91605 USA

Dear Bradford:

EDMO Distributors, Inc. is happy to inform you that your application for dealership has been approved. Your terms as a new dealer are Credit Card, we accept Visa, Master Card and American Express. Your account number is UNITAECA. We will be sending you our catalog, if you have not yet received one from our salesman.

If you have a question regarding your account, please do not hesitate to contact the credit department.

EDMO Distributors, Inc. wit.ll. your company.

Sincerely,

Laura Bahr Edmo Distributors, Inc.

:·~ ' l ,.. • ~ --,~ ·-- ~·· ' '• •.;- a~,

. : •. ~

is looking forward to doing business

:_:!<"'·· ........ ~- .:,_-,· .;. .:

12830 E. Mirabeau Parkwa~ Spokane, WA 99216 • (800) 235-3300 • LOCAL (509) 535-8280 • FAX (509) 535-8266

Quality System Approval

Date: November 5, 2001

To: United Aeronautical Corporation 7360 Laurel Canyon Blvd. North Hollywood, CA 91605·

Attention: Larry Bartroff, Quality Manager

This is to inform you that after a review of your Quality System we are pleased to report that your company has been approved and added to our Approved Supplier List.

We feel your company's Quality system is in compliance with our requirements at this time and we look forward to a productive and professional relationship with your firm and we thank you for your support.

Please be advised that this approval may be revoked at any time your company's Quality rating falls below the set guidelines.

For further information, please contact me @ (661) 824.6453

Sincerely,

Rick Escobar Procurement Quality Assurance, Manager

Cc: Purchasing Subcontracts

Right Systems 1434 Right line, Bldg. 58B Mojave, CA 93501·1666

Telephone (661) 824-4601

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 11. Contract ID Code I Pag~ 1 of Pages

I 1

? Amer.dnen~/Modification No. I 3. Effective Date 4. Requisition/Purchase Req. No. ,5.Project No.

POOOOl see Block 15c s. ~ssc:ed By CODE I N003B3 7. Administered By (If other than Item 6 CODE I S0512A

NAVICP-Philadelphia DCMA Los Angeles

Building 1 PO Box 9608

700 Robbins Avenue Mission Hills, CA 91346-9608

Philadelphia, PA 19111 SCD: A

Attn: Michael Mac Donald Ext: 4932

E-Mail Address: Michael.d.macdonald@navy.mil

8. Name and Address of Contractor (No., Street, County, State and Zip 9A.Amendment of Solicitation No.

United Aeronautical Corp Attn: Ron Guy 9B.Dated (See J:tem 11)

7360 Laurel Canyon Blvd No Hollywood, CA 91605-3790 lOA.Modification of Contract/Order No.

POC- (818) 764-2102 X N00383-05-G-056B

lOB. Dated (See Item 13

Cocle 13499 I Facility Code 02 March 2005

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS D :·:1e "bove numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers 0 is '":·:t.;,nded, D is not extended. Offer must acknowledge receipt of By completing items 8 and 15, and r·l:-cutnit:g copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c By scpa1·ar:.c· i.etter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGE~ENT 1'0 BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN RF.:,TECTIC:N (IF your offer. If by virtue of this amendment your desire to change an offer already submitted, such change may be made b:; t-::>leqr.:tnt n· let.ta.r, provided each telegram or letter makes reference to the solicitation and this amendment, and is received p,...:or tc· :.he opening hour and date specified.

1?.. ACCOUN~'ING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATION SOF CONTRACTS/ORDERS, IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CtiEO: ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify Authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN TE CONTRACT ORDER NO. ITEM lOA.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in P·•ying office, appropriation data, etc. SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b)

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT OF AUTHORITY Of:

D. OTHER !Specify type of modification and authority

IMPORTANT: Contractor ~ is not, [] is required to sign this document and return 1 copies to the issuing office. 8393.06

14. DE:SCRI"ION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter t•there ~e=lSible. 1

Reference: UAC email dated on 28 July 2008 from Ronald Guy.

L Option to extend BOA N00383-05-G-056B is hereby executed with a new expiration date of 02 March 2010. Ter.ms and Conditions will remain the same.

Except as provided herein, all terms and conditions unchanged and in fu11 force and effect.

of the document referenced in Item 9A or lOA, as heretofore changed, remains

15A. ~~D TITLE (Type of print)

/ '

to sign)

--------------~~ .. --~

(Type or print

16C. DATE SIGNED

"f'/7/t~v FOR 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR 53.243

\V•'-'• v..:r.Hn 1 avn:n11 ur 0;:) 1 HIt: U~C U~\IL T 1

SEAL

4£d?l/l&ll_ ~ SignatGJe

SE? I 2 2005

_icense is hereby granted to the applicant for the described commodity to Je permanently exported from the United States. This license may be ·evoked, suspended or amended by the Secretary of State without prior 1otice whenever the Secretary deems such action advisable.

., .~ ') £ Cl. I ( /.f _) () 7

LICENSE NO. LICENSE VALlO FOR

MONTHS FROM ABOVE DATE

UNITED STATES OF AMERICA U.S. DEPARTMENT OF STATE

APPLICATION/LICENSE FOR PERMANENT EXPORT OF UNCLASSIFIED DEFENSE ARTICLES AND RELATED UNCLASSIFIED TECHNICAL DATA

(mm-dd-yyyy) 2. PM/DDTC Applicant/Registrant Code

0Government 0Manufacturer

UNITED AERONAUTICAL CORP 7360 LAUREL CANYON BLVD. P.O. BOX 7102 NORTH HOLLYWOOD, CA 91609-7102

EPHONE NUMBER: 818-764-2102 l. Description of Transaction

3. Country of Ultimate 4. Probable Port

IL FL es, agency and telephone num U.S. Government personnel

(not PM/DDTC) familiar with the commodity

D Army D Air Force 0 Navy 0 Other NONE

7. Name and telephone number of applicant contact if U.S. Government needs additional information.

RONALD W. GUY, SAME AS ITEM 5

a. This application represents: I!J ONLY completely new shipment; 0 ONLY the unshipped balance of license no. . b. The IDENTICAL commodity 0 was licensed to the country in block 3 under license no. 0 was licensed to other countries

under license no. _______ 0 was returned without action under voided license no. . 0 was denied to the country

in block 3 under voided license no.'_------· liJ was never licensed for this applicant.

c. If commodity is being financed under 0 Foreign 'Military Sale (FMS); 0 Foreign Military Financing (FMF) or; 0 Grant Aid Progr,am (GAD),

nous LOTS MINOR COMPONENTS, ACCESSORIES, FRAME, ENGINE, INSTRUMENTATION AND ASSOCIATED EQUIPMENT AS REQUIRED FOR THE A-4 AIRCRAFT AND J52 ENGINES (ATTACHMENT 1)

VIII(h) XI(c)

$ 1,000,000.00

REFERENCE LOCKHEED MARTIN AIRCRAFT ARGENTINA S. "LETTER OF INTENT", DATED 12 JULY 2005 SUBJECT TO

DEPARTMENT LETTER

NO MAJOR COMPONENTS 13. TOTAL VALUE: $ 1,000,000.00

4. Name and address of foreign end-user 15. Manufacturer of Commodity BRAZILIAl\l NAVY MARTNHA DO BRASIL RUE 1 DE Y~CO 118-14 ANDAR CENTRO, RIO DE JANEIRO-RJ CEP 20010-000 BRAZ

6. Name and address of LOCKHEED MARTIN ARGENTINA S.A. AVENIDA FUERZA AEREA 5500, CORDOBA CP5010 CORDOBA, ARGENTINA

arne and address of foreign intermediate consignee

NONE

0. Specific purpose for which the material is required, including specific program/end item

?ARE PARTS FOR THE OVERHAUL & MAINTENANCE lAZILIAN NAVY'S A-4 AIRCRAFT AND J-52 ENG

2. LICENSE TO BE SENT TO: Name, address, ZIP code

UNITED AERONAUTICAL CORPORATION 7360 LAUREL CAN~ON BOULEVARD NORTH HOLLYWOOD, CA 91605-3790

OUR REF: UAC-9969-GFL

SEE ATTACHMENT II

17. Name and address of· seller in United States

SAME AS ITEM 5

19. Name and address of consignor and/or freight forwarder in United States OM USA, INC. 2025 NW 102 AVENUE, UNIT 111 MIAMI, FL 33172

TEL: 305-436-9996

21. APPLICANT'S S'fATEMENT (See I, RONALD W .' UUY , hereby apply for a license to complete

Typed name

the transaction described above; warrant the truth of all statements made herein; and acknowledge, understand and will comply with the provisions of Title 22 CFR 120-130, and any conditions and· limitations imposed. CHECK ALL THAT APPLY:

I!QJ: I am a responsible official empowered by the applicant to certify that the conditions of 22 CFR 126.13 and 22 CFR 130 as listed on the reverse of this form have been met in full.

0

0 D

The applicant, or another party to this export cannot meet one or more of the conditions in 22 CFR 126.13. A request for an exception to policy is attached.

list(s) is/are attached.

certify that the conditions of 22 reverse of this form have been met

such certification. ·

1-APPL CATI E OMB APPROVAL NO. 1405-0003 EXPIRATION DATE: 07-31-2005 'ESTIMATED BURDEN: 1 Hour

>SP-5 )4-2003

UNLESS OTHERWISE EXEMPT IN THE ITAR, APPROVED LICENSE MUST TO U.S. CUSTOMS OR POST OFFICE PRIOR TO EXPORT ovol'uL''""'

"Public reporting burden for this collection of information is estimated to average 1 Hour per response, including time required for sea.rchin~ existing data sources, gathering the necessary data, providing the information required, and reviewing the final collection. Send comments on the accuracy of th1s estimate of the burden and recommendations for reducing it to: U.S. Department of State (A/RPS/DIR) Washington, DC 20520.

--- ~--·---~·-·

Page 1 of 6

MAR 2 5 1992 Plan Identification No. E-WP-00007-U

[D-WP-099)

Mr. Larry E. Bartroff United Aeronautical Corporation 7360 Laurel Canyon Boulevard North Hollywood, California 91605

Dear Mr. Bartroff:

This is to inform you that your enclosed anti-drug plan has been approved by the Federal Aviation Administration (FAA). Under the terms of this approval, you are authorized to begin testing covered employees immediately.

This approval is contingent on your continuing association with the AMS Employee Drug Testing Consortium as specified in your plan. Should you terminate or modify the terms of your consortium membership, you must notify the FAA and submit an alternative plan for meeting the requirements of the anti-drug regulations. The identification number shown at the top of this letter should be referenced in correspondence to this office regarding your program.

Federal Aviation Regulations (FAR) Part 121 Appendix I requires submission of semiannual and annual reports to the FAA. Your initial report should be submitted by August 15, 1992, and should cover the period from initial implementation through June 30, 1992. A sample reporting format is enclosed for preparing the reports. Reports may be submitted directly to FAA by you or through your approved consortium, depending on the terms of your membership.

Sincerely,

William R. McAndrew Manager, Drug Abatement Branch Office of Aviation Medicine

Enclosures / cc: AMS Employee Drug Testing consortium

I. Approving National Aviation 2. 3. Form Tracking Number: Authority/Country:

FAA/United States AUTHORIZED RELEASE CERTIFICATE FAA Form 8130-3, AIRWORTIDNESS APPROVAL TAG

4. Organization Name and Address: 5. Work Order/Contract/Invoice Number:

United Aeronautical Corporation 7360 Laurel Canyon Blvd. North Hollywood, CA 91605 6. Item: 7. Description: 8. Part Number: 9. Eligibility: * 10. Quantity: 11. Serial/Batch Number: 12. Status/Work:

* 13. Remari<S:

NEW -INSPECTED IN ACCORDANCE WITH UNITED AERONAUTICAL CORPORATION QUALITY PROCEDURE QP 7.4.3-2, RECENING INSPECTION FOR NEW SURPLUS ITEMS.

UAC's certificated Repair Station certifies that the work specified in Blocks 12 I 13 was carried out in accordance with EASA Part-145 and in respect to that work the component is considered ready for the release to service under EASA Part-145 approval number: EASA.145.6016.

~"wore m"''"'""' l• w•fO<mity '" 19. IKI14 CFR 43.9 Return to Service IKIOther regulation specified in Block 13

d are in a condition for safe operation. Certifies that unless otherwise specified in Block 13, the work identified in Block 12 and described in Block 13 was accomplished in accordance with Title 14, Code of Federal Regulations, part 43 and a specified in Block 13. in respect to that work, the items are approved for return to service.

15. Authorized Signature:

~ 16. Approval/Authorization No.: 20. Authorized Signature: 21. Approval/Certificate No.:

PY3R780L 17. Name (Typed or Printed): .............. ~y): 22. Name (Typed or Printed): 23. Date (m/d/y):

-LARRY E. BARTROFF

~/Installer Responsibilities

It is important to understand that the existence of this document alone does not automatically constitute authority to install the part/component/assembly. Where the user/installer performs work in accordance with the national regulations of an airworthiness authority different than the airworthiness authority of the country specified in Block I, it is essential that the user/installer ensures that his/her airworthiness authority accepts parts/components/assemblies from the airworthiness authority of the country specified in Block I. Statements in Blocks 14 and 19 do not constitute installation certification. In all cases, aircraft maintenance records must contain an installation ce1·tification issued in accordance with the national regulations by the user/installer before the aircraft may be flown.

FAA Form 8130-3 (6-01) *Installer must cross-check eligibility with applicable technical data. NSN: 0052-00-012-9005

CERTIFICATE OF CONFORMITY ORIGINAL

Shipping Order No:

SITAUnited Aeronautical Corporation

Customer PO Sales Order/Reference Number Order Date

Bill To: Ship To:

Part No. Description Cond Qty S/L Cert NoBatch/Lot# Control#

Cert No:

7360 LAUREL CANYON BLVD.NORTH HOLLYWOOD, CA.PHONE 818-764-2102FAX 818-764-2115

Inspectors Stamp:For and on behalf of United Aeronautical Corporation

Signed:

We hereby certify that the parts in this shipment conform with applicable specifications and that documentation

and/or data is on file and available for examination.

FORM: 12-4.1 11-SEPT-2013APPROVED BY: LARRY BARTROFF

Technical Order I S ervice Mmmal Compliant.r •1m; ml

LOIMAN"MW~~-- NAM O~----.l Pfl[SF..RVA TION & PACI<AGING 51'ECir tCA liON!>

Ti lE COMPONENT IULNTIIIFD ON Tl lf fll IIERS'. :;tt •• 'h' l.t I' ' I : I' li ' oi·l SPECTFD tN ACCO I1DANCE Wil li CUHHFN I SrLcnrtl II nr, MJD 'J,\. f'll l·lll AIRWORTHY FOR RCTUHN TO SI::RVICI. PEHfiNHII Ill f •\l l~> <)I II II ' ' '·II,. Af\1 ON FILE AT THIS FACILITY UNDER Tfl l: DESIGN/\ TlU n nurn ti i Jr.ltlf II,

0

I c

I I I I II a: a: 1-a.: "' w w

oa:,:E "' "' ci :l :l w 0 ~ ~

"' ::> ::> .,_u ~"' ... z z ll. _J 2 -~ 0 w <e ~ E -'

(J ~ al~

I ...

ut-c- "' cs:=>g,J z !: • >-<( c . !II z I Z,., ~ ... a: "' w o ~g z :c "' "' _, a: " 3: ::> ... 0 :I

w 18 CQW~>- a: .. cs:< ~ = 0

w

wO~~ I " "' (JW<e.c::: z 1-M - ci ci 0

w - w

:>z"a a: >- a: z "' 0 z 2 z 2 a:=> z I _.

tC .. ... " w w "' ,.: X • w ... ..

w z ;c !II ,.: C) ..: "' ri u z .. l! z w ~ ...

f/) Cl) w .. ... a: w ::> ... w " • 0 " <( ... ... Cl) "' 0 0 a: u !II :I ;;; 0 u ;;; 0

March 30, 201 0

TO WHOM IT MAY CONCERN;

Universal City North Hollywood Chamber of Commerce 6369 Bellingham Avenue North Hollywood, CA 91606 (818) 508-5155 Fax (818) 508-5156 www.noho.org info@noho.org

COMPANY REGISTRATION VERIFICATION DOCUMENT

PLEASE USE THIS LETTER AS VERIFICATION TO CONFIRM THAT UNITED AERONAUTICAL CORPORATION HAS BEEN A MEMBER IN GOOD STANDING WITH NAME OF THE CHAMBER OF COMMERCE MARCH 30, 2010. TO THE BEST OF OUR KNOWLEDGE, UNITED AERONAUTICAL CORPORATION IS A DEFENSE COMPANY ENGAGED IN SALES AND MANUFACTURING.

1. COMPANY NAME :United Aeronautical Corporation 2. ADDRESS :7360 Laurel Canyon Boulevard,

North Hollywood, California 91605 3. TELEPHONE AND FAX :818-764-2102/818-764-2115 4. E-MAIL AND WEBSITE :uac@unitedaero.com 5. LEGAL FORM OF COMPANY :Corporation 6. TYPE OF BUSINESS :Military aircraft parts, systems and service. 7. TRADE REGISTER NUMBER :Tax ID No.: 95-4146590 8. ESTABLISHMENT DATE :1956 9. FOUNDER :Gordon Strube and Lawrence P. Holt 10. SHAREHOLDER($) AND PERCENTAGES:(3)Lawrence P. Holt(52%)Ronald W. Guy(24%

Brian G. Cole (24%) 11 . AMOUNT OF CAPITAL :See copy of financial statement 12. NUMBER OF EMPLOYEES :43 13. CHAMBER OF COMMERCE :Universal City North Hollywood Chamber of Commerce

North Hollywood, California, 91606 14. APPROVALS :ISO, FAA, EASA, and Northrop Grumman

iversal City North Holl Chamber of Commerce

l,j,'ilVERSAL CITY NO. HOLLYWOOD CHAMBER OF COMMERCE

6369 Bellingham Avenue North Hollywood, CA 91606

DATE: 05/03/2010

Universal City North Hollywood Chamber of Commerce 6369 Bellingham Avenue North Hollywood, CA 91606 (81 8) 508-5155 Fax (818) 508-5156 www.noho.org lnfo@noho.org

ECONOMIC SITUATION VERIFICATION FOR UNITED AERONAUTICAL CORPORATION

We, the Universal City North Hollywood Chamber of Commerce, hereby confirm that to the best of our knowledge, the following two articles do not apply to United Aeronautical Corporation:

__ Those going bankrupt or are being liquidated, whose affairs are administered by the court, who have announced for a commission of bankruptcy, who have suspended business activities, or who are in a similar situation under provisions of their own national laws and regulations.

__ Those whose bankruptcy is declared, who are the subject of an order of compulsory liquidation, or are under court administration due to debts to creditors, or who are in a similar under the provisions of their own national laws and regulations.

i rsal City North Hollywood Chamber of Commerce

L .IVERSAL CITY NO. HOU YWOOD CHAMBER OF COMMERCE

6369 Bellingham Avenue North HollywOod, CA 91606