user’s guide - tclusa · user’s guide for use with models: le32hde3000 / le39fhde3000 /...
TRANSCRIPT
Need assistance?visit our website at www.tclusa.com
or call 1-877-300-8837
User’s GuideFor use with models: LE32HDE3000/ LE39FHDE3000 / LE40FHDE3000
Figures and illustrations in this User’s Guide are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
1
WARNING
WARNING WARNING
th
operatCable TV Installer:
Important:
Product Information
Model No. ______________________ Serial No._____________________________________Purchase Date __________________ Dealer/Address/Phone___________________________
Product Registration
Important Information
ANTENNA LEAD IN WIRE
GROUND CLAMP
GROUNDING CONDUC TORS(NEC SEC TION 810-21)
GROUND CLAMPS
POWER SER VICE GROUNDINGELEC TRODE SYSTEM(NEC ART 250, PAR TH)
ELEC TRIC SER VICEEQUIPMENT
ANTENNA DISCHARGE UNIT(NEC SEC TION 810-20)
Important Safety Instructions
3
3
Table of Contents
1
Chapter 1 - Connections and Setup
Buttons on TV 6679
Initial Setup 11
Chapter 2 - Menu OperationMenu Display
1313
Sound Menu 13
BalanceSurround
Chapter 3 - Other Information
Chapter 1 Connections and Setup
Before Initial SetupProtect Against Power Surges
Safety Information
Avoid Audio Interference
Avoid Direct Light
Check Supplied Parts
Replacing your remoteIf you need to replace your remote, visit www.tclusa.com. A shipping and handling fee, and the appropriate sales tax, will be charged
upon ordering. Have your Visa or MasterCard ready.
Connections and Setup
Attaching Your TV to the Table Stand
Mounting Your TV to the Wall
Notes: Follow the directions included with the wall mount to mount the TV to the wall.Caution:
Purchase a VESA 200 x 200, M6 screw
6
Connections and Setup
Buttons on TVTV panel buttons on
CH+/-
VOL+/-
VOL+ also acts as the OKMENU
INPUT
POWER
Explanation of Jacks on TV
COMPONENT IN (CMPT) ( Green jack
for Y, Blue jack for Pb and Red jack for Pr ) Y Pb Pr (Component Video)
L/R AUDIORed and white jacks for R AUDIO and L AUDIO
connection. ( For mono audio sources, be sure to use the L AUDIO input.) (Note: AUDIO/VIDEO IN and COMPONENT IN share the same L/R AUDIO input jacks.)
AUDIO/VIDEO IN (AV) Yellow jack for
VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources, be sure to use the L AUDIO INPUT.)DVI/PC AUDIO IN (used for DVI/PC only)
Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only the picture signal, not the sound.VGA (PC VIDEO IN)
SPDIF OUT - DIGITAL AUDIO OUT (coaxial)
ANT/CABLE/SAT IN
MENU
INPUT
7
Connections and Setup
USB
HDMI 1 /DVI IN
HDMI 2 IN
(HEADPHONE)
Choose Your Connections
Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed HDMI cable is recommended for better compatibility.
480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats)
480i
480i, 480p, 720p/60Hz, 1080i/60Hz
HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz
VGA SVGA XGA
Input Signal Compatability
Connections and Setup
Input
TV
AV
CMPT
PC
HDMI 1
HDMI 2
USB
No label
No label
No label
No label
No label
No label
Same connection to HDMI 1 IN.
HDMI 2 IN
AUDIO/VIDEO IN (AV)
COMPONENT IN (CMPT)
HDMI /DVI IN1
INPUT
PC VIDEO IN
9
Connections and Setup
VOL CH
RC3000N02
INPUT
GUIDE
MENU CLEAR
GO BACK
INFO
MUTE
FAV MEDIA MTS TV
PIC
ZOOM
SLEEP
SLEEP
+
+
ZOOM-
-
Remote Control Functions
INPUT Opens the Input INPUT repeatedly to select the video input, or press options, and press OK
0-9press OK
channel, and then the OK
MENU
(arrows)
Note: In USB mode, the up or down arrow ( can also be used for rotating a photo when the photo is being diaplayed.
ZOOM+/- ( )
SLEEP+/-
PICINFO INFO to display
VOL+/-
MUTEFAV FAV button to browse the channels in your
OK
MEDIA Goes to the USB
(POWER
GUIDE
CLEAR
OK
GO BACK
CH+/-TV
MTS
ANT/CABLE
/SAT IN
Outdoor or indoor Antenna
Cable Box,
( Wall Outlet)
RF Coaxial
Wire
(75 ohm)
Or
Or
Connections and Setup
Obtain the Signal
ANT/CABLE/SAT IN
ANT/CABLE/SAT IN
Switching On
Switching Off
11
Connections and Setup
Initial Setup
Initial Setup
OK
Home
Retails
Home/Retail OKNote: if you select Retail, a screen menu will display to ask you go back to the previous menu to select Home again, or
OK
Tuner screen, select either Antenna or Cable/SatOK
Note: If you are using a satellite or cable set-top box, you do not have to complete the Channel Scan
Channel ScanOK
Note: If you do not want to scan for channels at this time, you can select Skip Scan or press OK/ to stop the scanning process, and perform the channel scan later in the Setup menu.
CLEAR
Initial Setup
Please select your language:
Language
NextSelect OK
EspañolFrançaisEnglish
Initial Setup TV Location
TV Location RetailHome
Back NextSelect OK
This mode is ENERGY STAR compliant.
Initial Setup Time ZonePlease select your time zone:
AlaskaPacific
Hawaii
MountainCentralEasternAtlantic
Newfoundland
EASTERN
Back NextSelect ExitCLEAROKInitial Setup Tuner
Please select your tuner mode: Cable/SatAntenna
Back NextSelect ExitCLEAROKInitial Setup Channel Scan
First, please connect Cable/Sat orAntenna. Start Channel Scannow? If you skip this step, theChannel Scan could be performedin Setup menu later.
Skip ScanScan
0%
Back NextSelect ExitCLEAROK
Chapter 2 Menu Operation
Menu Display
Sound
SetupParental Control
Language
SoundPicture
EqualizerBalanceSurroundAnalog TV Sound
USBExit
0On
StereoSpeaker OnSPDIF Type Dolby DigitalAuto Volume Control Off
BackMENU Enter Select ExitCLEAROK
Language
SetupParental Control
Language
SoundPicture
English On
USBExit
Español Desactivado
Français Désactivé
BackMENU Adjust Select ExitCLEAR
Closed Caption
SetupParental Control
Language
SoundPicture
CC SettingAnalog CC Type
USBExit
On Always
Digital CC TypeDigital CC PresetDigital CC Style
OffOn
BackMENU Adjust Select ExitCLEAR
Time Setup
SetupParental Control
Language
SoundPicture
Time ZoneTime
USBExit
OffSleep Timer
BackMENU Enter Select ExitCLEAROK
Picture
SetupParental Control
Language
SoundPicture
USBExit
Picture PresetBrightness
Natural
Advanced Settings
50
Sharpness 5Contrast 75
Reset Picture Settings
Expert Settings
BackMENU Adjust Select ExitCLEAR
Parental Control
Channel BlockButton Block
SetupParental Control
Language
SoundPicture
USBExit
V-ChipInput BlockChange Password
Off
BackMENU Enter Select ExitCLEAROK
Reset All
V-Chip
Rating EnableUS V-Chip
SetupParental Control
Language
SoundPicture
USBExit
Canada V-ChipUnrated/Exempt Ratings
On
Reset Downloadable Data
View
BackMENU AdjustSelect
Open V-Chip
Figure 1
Figure 3
Figure 5
Figure 7
Figure 2
Figure 4
Figure 6
Figure 8
Setup
SetupParental Control
Language
SoundPicture
Signal TypeChannel Scan
USBExit
Antenna
Channel SkipChannel EditInput SkipInput LabelsClosed CaptionTime SetupSystem Information
BackMENU Adjust Select ExitCLEAR
Reset All
13
Menu Operation
Using Menu System
MENU
OK
values, or use OK
OKMENU
press CLEAR
Picture Menu
To access the Picture Menu, press the MENU
Picture, then press OK
Note: some options may be not available for certain signal sources.Picture Preset: displays a list that lets you select
Natural, Sports, Personal or ENERGY STAR, Vibrant, Cinematic
Note: ENERGY STAR is the default setting, if you select some other options, the power consumption may change.Brightness:Contrast:
Sharpness:
Expert SettingsBacklight:
DynamicBacklight Light SensorOff
Color:Tint:
Color Temperature:
Note: Color and Tint are not available in PCmode.
Advanced SettingsLight Sensor:
Dynamic Backlight:
DynamicBacklight
Note: when Light Sensor or Dynamic Backlightis set to Off,
Noise Reduction:
these options:Low
Middle
High
SABC (Scene Adaptive Brightness Control): Option: On/Off On
PC Settings:
Reset Picture Settings:
Sound MenuThe Soundaccess the Sound Menu, press MENU on the
SoundOK
Equalizer:
Equalizer: soundpreset: Standard, Music, Voice, Movie, andPersonal.
Menu Operation
Frequency Range:
Equalizer option Personal
MENUBalance:
Surround: option On/Off
Speaker: option On/Off Off
SPDIF Type:
Available options are Dolby Digital, PCM, or Off.Auto Volume Control: option On/Off
Analog TV Sound:
Note: The Analog TV Sound option is only available for analog channels.
Mono (available for regular TV viewing only):
Stereo :
ChannelBanner
Second Audio Program (SAP): this option plays
Default Audio Language
EnglishEnglish, French, Spanish
Note: The Default Audio Language option is only available for digital channels.Current Audio Language
English in
Note: The Current Audio Language option is only available for digital channels.
Setup MenuThe Setup
MENUSetup
then press OK
Signal Type: Cable/Sator Antenna ANT/CABLE/SAT IN
Channel Scan
you watch TV and press CH+ or CH-to the next or previous channel in the Channel List
Channel ScanOK
(Note: If you wish to stop the search, press the CLEAR button.)
MENU
CLEAR
Channel Skip
when you press the CH+ or CH- button, the TV will
Menu Operation
Setup > Channel Skip, press OKopen the Channel Skip
OK
MENUpress CLEAR
Channel EditThe Channel Edit
Setup > Channel Edit, press OK
OK to enter the Channel Edit Channel Name OK
to
OKMENU
press CLEARInput Skip
the CH+ or CH-To hide video inputs:
Setup > Input Skip, press OKdisplay the Input Skip
OK
MENUpress CLEAR
Input Labels
Setup > Input Labels, press OKdisplay the Input Labels
MENUpress CLEAR
Closed Caption
Note: Closed caption settings are not available for HDMI, CMPT or PC inputs. These settings
Closed captioning is not available on all channels
with closed captioning information. When a digital program is closed captioned, CC is displayed in the channel banner
CC Setting: this option allows you to choose the
Off-On Always-
On When Mute- This option allows the
Analog CC Type : this option lets you select
Digital CC Type:
Digital CC Preset:select between Off and On On
Digital CC Style:
Caption Style - Select either As Broadcaster or Custom Custom options,
Digital CC Size -
16
Menu Operation
Digital CC Font -
Digital CC Background Color - lets you set the
Digital CC Background Opacity - Set the
Digital CC Color -
Digital CC Opacity -
Time Setup Time Zone
Setup > Time Setup > Time ZoneOK
MENU button to return to the previous CLEAR
Time
Setup > Time Setup > Time, press OK
Auto Synchronization -On
Daylight Saving - Select Auto
Date -the date, press OK Note: using the same way to set the time belowTime -Power On Timer - Select Once/Daily/OffPower On Time -
Power Off Timer - Select Select Once/Daily/OffPower Off Time -
Sleep Timer:
System Information
Reset All
OK or CancelOK
Parental Control Menu
Change V-Chip Password
these steps:Parental Control > Change Password,
OKChange Password
Note: The password must be entered before the TV will continue with Parental settings next time. The super password is 2458, If you forget your password, enter it to override any existing password.
Channel Block
17
Menu Operation
Parental Control > Channel Block, pressOK
OK
channel, you will need to enter a password to
Button Block
Parental Control > Button Block,to choose the On
Off
V-ChipOK
V-Chip Rating EnableSelect Parental Control > V-Chip > Rating Enable,then press
Rating Enable to On
US V-Chip TV Ratings
Parental Control > V-Chip > US V-Chip > US TV Ratings, press OK to enter the USTV Ratings
TV–Y All childrenTV–Y7 Children 7 years and olderTV–G General audienceTV–PGTV–14TV–MA Mature audience only
DLS Sexual situationsV ViolenceFV Fantasy violence
OK
US V-Chip Movie Ratings
Select Parental Control > V-Chip > US V-Chip > US Movie Ratings, press OK to enter the USMovie RatingsIn the US Movie
G General audiencePGPG-13R
NC-17X Mature audience only
Canada English or French V-Chip Ratings
Select Parental Control > V-Chip > CanadaV-Chip, press OK to enter the next
Canadian English Ratingsor Canadian French Ratings OK to
Canadian Enlish Ratings:C ChildrenC8+G General audiencePG14+18+ AdultCanadian French Ratings:G General audience8 ans+ 13 ans+ Viewer 13 and older16 ans+ Viewer 16 and older18 ans+ Adult
3OK
Open V-Chip: Allows you to select the downloadable
Blocking Unrated/Exempt Programs
Menu Operation
Select Parental Control > V-Chip > UnRated/Exempt Ratings
View and BlockView Block
Reset Downloadable DataParental Control > V-Chip > Reset
Downloadable Data, press OK
OK
Input Block Parental Control > Input Block, press
OK to
OK
Language Menu
Language, press OK to display the Language
to select On or OffMENU or CLEAR
USB Menu
only suppport FAT format and unpartitioned USB device
steps:MENU
to select USBOK to proceed to the USB
Or, you can press the MEDIAcontrol to display the USBalso press the INPUT button to display the input list and select USB(Note: if no USB device is inserted, “No Media”displays on the screen, only suppport FAT format and unpartitioned USB device)Media Brower: select Media Brower, press OKto enter, then press
OKOpen -
Thumbnail - Select to
Slideshow -
Play Music -
Return -Media Settings: select Media Settings, press OK to enter, then
Photo Settings - Select to display PhotoSettings
Slideshow Interval - Select the SlideshowInterval: 5 Seconds, 10 Seconds, 20 SecondsSlideshow Effect - Select the SlideshowEffectSlideshow Repeat - Select the options: Off/OnThumbnail Size- Select to display the
5X3 and 3X2Music Settings: select to display Music Settings
Music Play Mode - Select the options: Once,Play All, RandomMusic Play Repeat - Select the options: Off/OnMusic Auto Play - Select the options: Off/On
MENUCLEAR
19
Chapter 3 Other Information
Frequently Asked Questions (FAQs)
Visit
Other Information
Troubleshooting
TV ProblemsThe TV won’t turn on.
OK
There is no picture and no sound but the TV is on.
INPUT
ANT/CABLE/SAT IN
The screen is blank.
The buttons on the TV panel don’t work.
The TV turns off unexpectedly.
Other Information
You can’t select a certain channel.Parental Control
TV/VCR TV/ VCR
TV
The stereo reception is noisy.
A black box appears on the screen.
You are having problems with the HDMI Connection.
HDMI 1, or other HDMI screen, press the INFO Channel Banner, the
HDMI 1, or other HDMI
The remote control doesn’t work.
The Universal Remote control doesn’t work.
You are experiencing problems with V-Chip/Parental Controls.Iselect Parental Control > V-Chip > Rating Enable,
Other Information
Care and CleaningC
IMPORTANT:
TTE Technology, Inc. (“TTE”) Limited Warranty
What your warranty covers:
New LCD/LED TelevisionsFor how long after your purchase:
What we will do:
How to get service:1-877-300-8837
What your warranty does not cover:
Product Registration:
Limitation of Warranty:
PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY.
REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE.
How State Law relates to this warranty:
If you purchased your unit outside the United States or seek warranty coverage outside the United States:
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser.
B
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA).
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.
products and practices.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are registered trademarks of Dolby Laboratories.
FCC Information