· web viewdecember 27, 2010. 8:30-18:00. on-site registration. 8:30-9:30. open ceremony /...

The 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2)Kish Island-Iran

December 27-30, 2010

Final Program

December 26, 201015:00-17:00 Registration (Registration Desk, Hotel Eram, Kish Island, Iran)17:00-19:00 A Meeting with Advisory Board, Session Chairs and Technical Staff (Location: Hotel Eram, Kish Island)

December 27, 20108:30-18:00 On-site Registration8:30-9:30 Open Ceremony / Welcoming by Co-chairs: M. M. Shokrieh & A. Varvani-Farahani 9:30-19:00 The first day of the conference is devoted to poster presentations.

All poster presenters have to mount their posters on the designated area before 9:30 am.Please notice that papers (accepted as Oral or Poster) must be presented by authors in the conference. The un-presented papers (Oral or

Poster) will not be reviewed as the selected papers. Therefore, in order to increase the chance of a paper (Oral or Poster) to be selected for the publication in the ISI journal, we encourage the authors to participate in the conference and present their papers.

List of the papers accepted as posters can be found on pages 10 to 24. Conference sessions adjourn for the day

Oral PresentationsDecember 28, 2010

8:30-18:00 On-site Registration8:30-9:00 Keynote Speaker: S.R. Ghaffarian, Amirkabir University of Technology, Tehran

Microcellular CompositesSession Chairs: M. Z. Kabir & M. Golzar Subject: Vibrations

9:00-9:20CCFA-245-1

Free Vibration Analysis of a Functionally Graded Piezoelectric Beam Based on Higher-order Beam Theory Using the Finite Fourier Transformation MethodA. Doroushi and M.R. EslamiAmirkabir University of Technology, Tehran

1

9:20-9:40CCFA-22-1

Dynamic anti-plane deformation of an orthotropic wedge with viscous dampingM. Ravandi and S.J. FariborzAmirKabir University of Technology, Tehran

9:40-10:00CCFA-357-4

Transient Response of a Double-Walled Cylindrical Structure Made of Functionally Graded Materials Filled Between Walls and Submerged in Fluid K. Daneshjoo and M. BakhtiariIran University of Science and Technology, Tehran

10:00-10:20CCFA-419-1

Damage detection in a composite plate using modal analysis and artificial intelligence M.R Nasiri, M.J. Mahjoob and A. Aghakasiri University of Tehran

Coffee/Tea Break (10:20-10:40)

Session Chairs: J. Rezaeepazhand & M. Tahani Subject: Design & Analysis - I10:40-11:00CCFA-539-1

Numerical Analysis of Steel HSS Beam-Column Retrofitted with CFRPS. Movaghati and A. Rahai Amirkabir University of Technology, Tehran

11:00-11:20CCFA-378-1

Approximate Torsional Analysis of Multi-layered Tubes with Non-circular Cross-sectionsB. Gholami Bazehhour and J. RezaeepazhandFerdowsi University of Mashhad

11:20-11:40CCFA-454-1

Forced Vibration Analysis of Cross-Ply Laminated Plates Using a Layerwise Theory1M. Tahani and 2I. Golmakani Torghabeh1Ferdowsi University of Mashhad2Islamic Azad University, Mashhad

11:40-12:00CCFA-192-1

A numerical and experimental study on bending ability of glass fiber metal laminate compositeS.Amirnejad, M.Kadkhodayan,H.R.FazliFerdowsi University of Mashhad

Lunch Break (12:00-14:00)

Session Chairs: A. Shojaei & M.S. Kiasat Subject: Nano-Mechanics14:00-14:20CCFA-471-1

Combined Electrical and Thermal Percolation Threshold in Single/Multi Walled Carbon Nanotube Polymer-Matrix CompositesM. Nabizadeh, A. Rastgoo, M. SamadzadehUniversity of Tehran

14:20-14:40CCFA-331-1

The effect of multi-walled carbon nanotube dimensions on mechanical properties of epoxy-based nanocompositesM.R. Ayatollahi, S. Shadlou, M.M. ShokriehIran University of Science and Technology, Tehran

2

14:40-15:00CCFA-492-3

Fabrication and Characterization of Carbon Nanofiber Hybrid LaminatesM. S. Kiasat and R.NajarianAmirkabir University of Technology, Tehran

15:00-15:20CCFA-590-2

Micromechanical modeling to analyze the reinforcing efficiency of carbon nanotube and high structure carbon black on the mechanical properties of styrene-butadiene-rubberM. M. Saatchi and A.ShojaeiSharif University of Technology, Tehran

15:20-15:40CCFA-540-1

Studying Mechanical Response of Aligned Silver Nano-Composites Using Hybrid Molecular Dynamics-Finite Element ModelingH. Salahshoor,B. Mortazavi , S. Mohammadi University of Tehran

15:40-16:00CCFA-23-1

Development of a Full Range Multi-scale Model to Obtain Elastic Properties of CNT/Polymer CompositesM. M. Shokrieh and R. RafieeIran University of Science and Technology, Tehran


Session Chairs: A. Khavandi & M. Meratian Subject: Manufacturing & Characterization16:20-16:40CCFA-314-1

Production of High Strength Al-Al2O3 Composite by Accumulative Roll BondingM. Rezayat ,A. AkbarzadehSharif University of Technology, Tehran

16:40-17:00CCFA-152-1

Construction of Composite Polymer Bipolar Plate for Fuel CellEhsan Zarmehri, Morteza Sadeghi, Arjomand Mehrabani-Zeinabad, Mahmoud MeratianIsfahan University of Technology

17:00-17:20CCFA-37-1

Indentation of a Functionally Graded Plate by a Rigid Spherical IndenterA. Nikbakht, M. Sadighi and A. FallahiAmirKabir University of Technology, Tehran

17:20-17:40CCFA-376-1

Feasibility study of porous Fe-Al2O3 composite fabrication through combination of SPS and SHS processesA. Babakhani, E. zahabi, H. Yavari mehrabani, J. Vahdati-khakiFerdowsi university of Mashhad

17:40-18:00CCFA-253-1

Study of mechanical properties of pultruded polymer matrix composites (PMC) and the application of composite cross-arms in medium voltage power delivery linesA. Kamali, A. Khavandi, M. Bolourian K.Iran University of Science and Technology, Tehran


3

Session Chairs: M.M. Aghdam & M. Mehrvar Subject: Mechanical Behavior18:20-18:40CCFA-333-1

Analysis of the effect of stiffener shape and profile in composite isogrid stiffened shell under axial loadingM.Zandi and G.H.RahimiTarbiat Modares University, Tehran

18:40:19:00CCFA-339-1

Bending analysis of laminated skew plates using extended Kantorovich method1A. Fallah , 2M.M. Aghdam1Sharif University of Technology, Tehran2Amirkabir University of Technology, Tehran

19:00-19:20CCFA-479-1

Fatigue Damage and Life Assessment of Al6061/Al2O3 and Al6061/SiC PMM Composites under various Loading ConditionsC. E. Sutton, A. Varvani-FarahaniRyerson University, Canada

19:30-20:30 General Meeting of Composites Scientific AssociationConference sessions adjourn for the day

December 29, 20108:30-18:00 On-site Registration8:30-9:00 Keynote Speaker: M. H. Beheshty, Iran Polymer and Petrochemical Institute, Tehran

Science and Technology of Thermoset PrepregsSession Chairs: H. Hosseini-Toudeshky & H.R. Ovesy Subject: Damage Mechanics - I

9:00-9:20CCFA-19-3

Application of Solid-like Interface Element in Delamination Growth Analysis Under Cyclic Loading1H. Hosseini-Toudeshky, 2B. Mohammadi, 1A. Jasemzadeh 1Amirkabir University of Technology, Tehran2Iran University of Science & Technology, Tehran

9:20-9:40CCFA-82-1

Buckling Analysis of Moderately Thick FGM Plates using the Finite Strip Method1H.R. Ovesy, 2S.A.M. Ghannadpour and 1M. Nassirnia1Amirkabir University of Technology, Tehran2Shahid Beheshti University, Tehran

9:40-10:00CCFA-17-5

Investigation in to damage pattern and extension of unsaturated resin/glass fiber nanocomposite reinforced by nanoclayJ. Moftakharian, M. Esfandeh, A.SabetIran Polymer and Petrochemical Institute, Tehran

10:00-10:20CCFA-34-1

Wavelet-based Acoustic Emission monitoring of composite materials damage under quasi-static 3-point bending testM. Fotouhi, H. Heidary and M. Ahmadi, SH. ShamsAmirkabir University of Technology, Tehran


4

Session Chairs: S.M. Hashemi & M.A. Kouchakzadeh Subject: Damage Mechanics - II10:40-11:00CCFA-640-1

Damage Assessment of CFRP Composites of [90/±45/0]s Layup based on Stiffness Degradation over Fatigue Stress CyclesG. R. Ahmadzadeh, A. Shirazi and A. Varvani-FarahaniRyerson University, Canada

11:00-11:20CCFA-336-1

Detection of delamination in cross-ply composite laminated beams utilizing irregularity of mode shapesS. R. Kazemi Bazardehi and M.A. KouchakzadehSharif University of Technology, Tehran

11:20-11:40CCFA-379-1

The Study of Mode II Delamination on Glass/Epoxy Composite Materials by Acoustic EmissionJ. Yousefi, M. Nazmdar Shahri, M. Hajikhani , M. Ahmadi NajafabadiAmirkabir University of Technology,Tehran, Iran

11:40-12:00CCFA-283-1

Low-Velocity Impact Response Analysis of Fibre-Metal Laminate (FML) Circular Cylindrical Shells Using A Simple New Contact Force Estimation ProcedureA. Davar, S.M.R. Khalili , K. Malekzadeh FardK. N. Toosi University of Technology, Tehran


Session Chairs: M. Mohseni Shakib & H. Hosseini-Toudeshky Subject: Damage Mechanics - III14:00-14:20CCFA-537-1

Computational Investigation of Delamination in T-shaped Laminated Composite ComponentsH. Soltani and M. Mohseni Shakib and M. Mojtahedpour Imam Hosien University, Tehran

14:20-14:40CCFA-360-1

Experimental Effects of Various Parameters on Kink-Band Formation of Glass/Epoxy Laminates1A. Kabiri Ataabadi, 2H. Hosseini-Toudeshky and 1S. Ziaei-Rad

1Isfahan University of Technology2Amirkabir University of Technology, Tehran

14:40-15:00CCFA-422-1

Effects of adhesive thickness and its dynamic disbond on fatigue performance of cracked aluminium panels repaired with adhesively bonded composite patchesA. Fereidoon and M. ZarrinkamarSemnan University

15:00-15:20CCFA-139-1

Local Buckling Analysis of Rectangular and Longitudinally Stiffened Functionally Graded Plates using the Finite Strip MethodS. Sarrami Foroushani, M. Azhari ,M. M. Saadatpour

Isfahan University of Technology15:20-15:40CCFA-647-2

Dynamic Analysis of the Metal and Composite Aerobatic Wing Box-Initial Aeroelastic Investigations 1 Gamal M. Ashawesh, 2S. R. Gashoot and 1Othman M. Maklouf1Engineering College, Tajoura, Libya

5

2Alfatah University, Tripoli, Libya15:40-16:00CCFA-453-1

Plastic Shrinkage Cracking and Workability of Fibers SCC CompositeA. A. Maghsoudi, M. Nouri, M. MaghsoudiShahid Bahonar University of Kerman


Session Chairs: B. Kaffashi & M.H. Beheshty Subject: Manufacturing & Fabrication16:20-16:40CCFA-276-1

The effect of mixing procedure on rheological properties of glass flake-epoxy vinyl ester composites1B. Kaffashi, 2M. Ehssani, 1H. Haddadi1University of Tehran2Iran Polymer and Petrochemical Institute, Tehran

16:40-17:00CCFA-7-1

Preparation and Tack Characterization of Glass/Phenolic PrepregsS. Shaghaghi, M.H. Beheshty and H. RahimiIran Polymer and Petrochemical Institute, Tehran

17:00-17:20CCFA-103-1

Experimental Study on the Extrusion of Wood Plastic Composite Foam: Observation of Variations of Weight, Density, Cost and StrengthS.Y. Daryabari, A.H. Behravesh and A.M. HaghshenassTarbiat Modares University, Tehran

17:20-17:40CCFA-447-1

Fabrication of aluminum based composite foam by PM route using the blowing agent CaCO31 K. Sardashti, 2 A. Mohammadpour, 3 S.M.H Mirbagheri, 2 M. Ghambari1Technische Fakultät, University of Erlangen, Germany2University of Tehran3Amirkabir University of Technology, Tehran

17:40-18:00CCFA-488-1

Effect of fiber acid treatment on the dynamic mechanical properties of unsaturated polyester/carbon fiber unidirectional composites1B. Fathi, 2M. Esfandeh, 3A. K. Soltani, 3I. A. Amraei, 3H.Taghavian1Iran R&D Center for Chemical Industry, Karaj2Iran Polymer and Petrochemical Institute, Tehran3Malek Ashtar University of Technology, Tehran


Session Chairs: S.M.R. Khalili & A. Abedian Subject: Optimization & Finite Element Analysis18:20-18:40CCFA-169-1

Utilizing Genetic Algorithm for Multiobjective Structural Optimization of Helicopter Rotor BladesA.R. Gorjipoor and A. AbedianSharif University, Tehran

18:40-19:00CCFA-52-1

Natural frequency & Shape Mode of Isotropic and FGM Plates Using First-Order Shear Deformation Theory with Finite Element Method and Investigation of Rotation of the Line of Nodes of VibrationM.M. Hazrati, M. Sharyat

6

K.N.Toosi University of Technology, Tehran19:00-19:20CCFA-83-1

Prediction of Fiber Glass Orientation after Hot Rolling Process of Polymer Composite by Finite Element ModelingM. Sedighi and M. Fatehi and M. HonarpishehIran University of Science and Technology, Tehran

20:00-22:00 (Conference banquet is held in a mountain made of Composites / Restaurant “Kooh-E-Noor” - Kish Island)Conference sessions adjourn for the day

December 30, 20108:20-18:30 On-site RegistrationSession Chairs: A. Fereidoon & M. Golzar Subject: Design & Analysis – II

8:20-8:40CCFA-229-1

Effect of composite laminated layup on vibrational behavior of composite pipe containing flowing fluid Z. Hooshyar, H. Haghighat , M.H. KadivarShiraz University

8:40-9:00CCFA-670-1

A Novel Model for Simulation of Glass/Polyester Pultrusion ProcessMahmood M. Shokrieh, Ashkan M. AghdamiIran University of Science and Technology, Tehran

9:00-9:20CCFA-387-2

A Dynamic Finite Element for the Free Vibration Analysis of Nonuniform Extension-Torsion Coupled Composite Box-BeamsS.M. Hashemi , A. RoachRyerson University, Canada

9:20-9:40CCFA-463-1

Effect of Inlet Tube Dimensions on VARTM Mold Filling TimeP.Ghabezi, M.Golzar ,S.Rajabi Jalall University of Tarbiat Modares, Tehran

9:40-10:00CCFA-591-1

Ballistic Impact Perforation into GLARE Targets Part I: Experiments and Numerical ModelingH. Sabouri, G. H. Liaghat and H. AhmadiTarbiat Modares University, Tehran

10:00-10:20CCFA-472-1

Mechanism and Kinetic Modeling of Photodegradation of Polymer-based Composites in Aqueous SolutionS. Ghafoori, M. Mehrvar, and P. ChanRyerson University, Canada


Session Chairs: M. Z. Kabir & B. Mohammadi Subject: Design & Analysis – III10:40-11:00CCFA-317-2

Inter-laminar stress consideration of lateral-torsional buckling of FRP-retrofitted steel-beam using first order shear deformationM.Z. Kabir, A.E. SeifAmirkabir University of Technology, Tehran

11:00-11:20CCFA-293-1

Development of a Three Dimensional Finite Element for a Composite Layer Consisting of Adhesive BondingM.H. Malakooti, H. Ahmadian , H. Jalali

7

Iran University of Science and Technology, Tehran11:20-11:40CCFA-19-1

Buckling Analysis of Micro- and Nano-Beams Based on Nonlocal Euler Beam Theory using Chebyshev Polynomials1B. Mohammadi, 2S. A. M. Ghannadpour, 1M. KalamiYazdi1Iran University of Science and Technology2Shahid Beheshti University, Tehran

11:40-12:00CCFA-394-1

Investigation of mechanical properties of clay/epoxy nanocompositesM. M. Shokrieh, A. R. Kefayati, M. ChitsazzadehIran University of Science and Technology, Tehran


Session Chairs: A. Khavandi & A. Mirhabibi Subject: Nano-Materials - I14:00-14:20 CCFA-150-1

Synthesis, characterization and electrochemical testing of zirconia-10 mol% alumina nanocomposite thin films on the 316L stainless steel substrate via a sol-gel process1E. Nouri, 1M. Shahmiri, 1H. R. Rezaie, 2F.Talayian1Iran University of Science and Technology, Tehran2Sahand University of Technology, Tabriz

14:20-14:40CCFA-68-3

Thermoplastic Elastomer Nanocomposites Based on PP/EPDM/Cloisite 15AR. Khosrokhavar, G. R. Bakhshande, G. Naderi, M. H. GhoreishyIran Polymer and Petrochemical Institute, Tehran

14:40-15:00CCFA-81-1

Preparation of SiC Nanowires by Carbothermal Reduction from Carbon Nanofiber Templates1M. Karbalaie , 2M. Yazdanirad and 3A. Mirhabibi1Ariadana Energy Group, Tehran2Tarbiat Modares University, Tehran3Iran University of Science and Technology, Tehran

15:00-15:20CCFA-384-1

The optimization of a gypsum based Nanocomposite material for extrusionS. A. Mousavizadeh , H. NuranianMaterials and Energy Research Center (MERC), Tehran

15:20-15:40CCFA-297-1

The Effect of Organoclay on the Mechanical Properties of Polymer Modified BitumenF. Pashaei Sorbaghi, M.Kokabi, O.Rastegar, M.Razzaghi KashaniTarbiat Modares University,Tehran

15:40-16:00CCFA-385-1

Synthesis and characterization of ZrO2–MgAl2O4 nanocomposite powder by a novel chemical route A.M. Khachatourian, H. Sarpoolaky, H. RezaieIran University of Science and Technology, Tehran


Session Chairs: M. Sharyat & M. Esfandeh Subject: Nano-Materials -II16:20-16:40CCFA-264-1

Evaluation of Yield Strength of PLGA/nano-BCP Composite Scaffolds During In Vitro Degradation1M. Ebrahimian-Hosseinabadi, 1F. Ashrafizadeh and 2M. Etemadifar1University of Technology, Isfahan

8

2University of Medical Sciences, Isfahan16:40-17:00CCFA-474-1

Experimental Study of Wear Behavior in Polyacetal (POM)/Clay Nanocomposite GearsE. Ashrafi, A. Nezami-Fard, K. Shelesh-NezhadUniversity of Tabriz, Tabriz

17:00-17:20CCFA-148-3

Investigation of effect of ball milling and functionalizing on electrical, thermal and Mechanical properties of phenolic resin/MWCNT composite1R. Taherian, 1M.J.Hadianfard, 2A.Nozad Golikand, 1M.Moradzaman 1Shiraz University2Header of Materials research institute, Tehran

17:20-17:40CCFA-438-1

Fabrication of Composite Electrodeposited Sn-Sb on Carbon Nanofiber Anode Material for Lithium Ion BatteriesA.R.Saatchi, E.Ghanbari, K.Raeissi, H.Tavanai, A.SaatchiIsfahan University of Technology

17:40-18:00CCFA-239-1

Influence of Bismuth Addition on the Microstructure and Mechanical Properties of In-situ Formed Mg/Mg2Si CompositeM. Meratian, F. Mirshahi and M. Mohammadi ZahraniIsfahan University of Technology

18:00-18:30 Conference sessions adjourn-Closing Statements

9

PostersDecember 27, 2010

CCFA-458-1 The effects of TiB2 particle volume fraction on the hot workability of TiB2/AA 2024 composites1M. Jamalloo ,1A. Akbarzadeh, and 2H. Khalilpour1Sharif University of Technology2IUIM University

CCFA-9-1 Flutter & Divergence Based Optimization of Laminated Composite Plates under Combined LoadingsM. Z. Kabir and E. ShafeiAmirKabir University of Technology, Tehran

CCFA-331-2 Fabrication of Epoxy/Multi-Walled Carbon Nanotube-Nanoclay Nanocomposites: Investigation of Fracture ToughnessM.R. Ayatollahi, M.M. Shokrieh, S. Shadlou, A.R. Kefayati, M. ChitsazzadehIran University of Science and Technology, Tehran

CCFA-332-1 Bending- torsional flutter of a swept composite wing with an attached massS. Irani , M. R. AmoozgarK.N.Toosi University of Technology, Tehran

CCFA-342-1 On the Reinforcement of Asphalt-Concrete Structures Using Poly Propylene Fibers 1Sayyed Mahdi Abtahi, 2Saman Esfandiarpour, 2Milad Ghorban Ebrahimi,1Sayyed Mahdi Hejazi1Isfahan University of Technology2Eastern Mediterranean University (EMU), North Cyprus

CCFA-347-1 Elastic buckling of FGM cylindrical shell surrounded by an elastic foundationE. Bagherizadeh, Y. Kiani, M. R. Eslami, M. SadighiAmirkabir University of Technology, Tehran

CCFA-371-2 Effect of Nanoclay particles in composites made via resin infusion process1M. Karimzadeh, 2M.H. Beheshty, 2A.R.Sabet, 1E. Jowdar1South Tehran branch, Islamic Azad University2Iran Polymer and Petrochemical Institute, Tehran

CCFA-388-1 Synthesis of Ni-Cu Nanocoating by Mechanical Alloying Method on Ni Balls1Iman Farahbakhsh, 2Alireza Zakeri, 2Kazuyuki Hokamoto1. Islamic Azad University- Quchan Branch2Kumamoto University, Japan

CCFA-395-1 Flow Behavior of Al Matrix Composite Reinforced by Iron Based (20% Cr-30%Ni) Fibers during Equal Channel Angular PressingS. Mirab, M. Nili-Ahmadabadi, M. Moradi, M. NaderiUniversity of Tehran

10

CCFA-475-1 An Analytical and Numerical Investigation of Stiffness Matrix of Different Lattice Grids in Advanced Grid Stiffened Composite StructuresH. Shahsavari Alavijeh, S.Sadeghnejad Limouei and M. Sadighi Amirkabir University of Technology, Tehran

CCFA-481-1 Effect of Different Boundary Conditions and Materials on Smart CompositesM. Aghaie-Khafri, M. SaadatfarK. N. Toosi University of Technology, Tehran

CCFA-550-1 Synthesis nanacomposite Ag/ZnO via coprecipitation method M.R.Rabiei, N.Parvin, A.Azadmehr and F.Shakerian Amirkabir University, Tehran

CCFA-558-2 Synthesis of Red Pearlescent Pigments based on Nano Hematite and Muscovite by Sol-Gel MethodM. Hosseini ZoriInstitute for Colorants, Paint and Coatings, Tehran

CCFA-572-1 Effect of Mineralizer on the Synthesis of Silica- Hematite Nano Composite1F.Faraghnia, 2 M.A.Faghihisani, 3S. Baghshahi1University of sciences and researches, Tehran2University of Sharif, Tehran3University of Ghazvin

CCFA-583-1 Aeroelastic Stability of Supersonic Composite Fins Considering Thickness EffectR. Dehghani Firouz-Abadi, S. M. AlaviSharif University of Technology, Tehran

CCFA-605-1 Experimental Study on Effect of the Matrix Melt Flow Behavior on Physical and Mechanical Properties of Extruded Wood-HDPE CompositesM. TabkhPaz Sarabi, A.H. Behravesh, P. Shahi and S.Y. DaryabariTarbiat Modares University, Tehran

CCFA-611-2 Transient Liquid Phase Diffusion Bonding of Al A356/SiC Metal Matrix Composite Using Cu interlayerH. Adgi, A. Halvaee and H. NamiUniversity of Tehran

CCFA-45-1 Study the Effect of Aramid Fibers on Mechanical and Tribological Properties of PolyacetalA. Fakhar and M. Razzaghi KashaniTarbiat Modares University, Tehran

CCFA-54-3 Structural and mechanical properties of epoxy resin/jeffamine-D400 reinforced by multiwall carbon nanotubesM. J. Khoshgoftar, G. H. Liaghat and M. H. PolTarbiat Modares University, Tehran

CCFA-63-2 In situ formation of titanium carbide-reinforced titanium composite layersA.Gh. Safaei, M. Heydarzadeh Sohi, J. RassizadehghaniUniversity of Tehran

CCFA-85-1 Fabrication and Characterization of Hydroxyapatite/Chitosan-Gelatin Nanocomposite Bone Tissue Engineering ScaffoldE. Beman , S. HesarakiMaterial and Energy Research Center, Meshkindasht, Karaj

11

CCFA-112-1 Characterization of a Smart Nitinol/Silicone Rubber Composite for using in Soft Tissue Replacements1N. Hassanzadeh Nemati, 2S.K. Sadrnezhaad1Science and Research Branch, Islamic Azad University, Tehran2Sharif University of Technology, Tehran

CCFA-157-1 Evaluation of Physical and Mechanical Properties of Cu/Cr2O3 Nanocomposite Produced by Mechanical Alloying and Internal OxidationF. Shojaeepour, K. Purazrang, P. AbachiSharif University of Technology, Tehran

CCFA-174-1 Optimization for Minimum Mass of Composite Grid Stiffened Cylindrical Shells under Axial Compressive Load Based on Analytical and Graphical MethodsK. SayadResearch Center of Structures, Aerospace Organization

CCFA-304-1 Microcrystalline Cellulose as a Reinforcing Agent in Wood Plastic Composites1A. Nourbakhsh, 2A. Ashori , 3M. Kouhpayehzadeh and 1A.Kargarfard1Research Institute of Forests and Rangelands (RIFR), Tehran2Iranian Research Organization for Science and Technology (IROST), Tehran3Islamic Azad University, Pishva Branch, Varamin

CCFA-344-1 A Study Based on the Use of Textiles from Worn Tires in Manufacturing FRP Composites and Decreasing Adverse Environmental EffectsSiamak Boudaghpour, Milad EbrahimiK.N.Toosi Technical University, Tehran

CCFA-351-1 THERMAL CONDUCTIVITY OF FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBE/EPOXY COMPOSITES1A. Heidari, 2M.H. Beheshty, 2H. Rahimi1South Tehran branch, Islamic Azad University2Iran Polymer and Petrochemical Institute, Tehran

CCFA-377-1 The effect of direct and pulse current on the Ni-WC nanocomposite coatings and evaluating its wear behaviourM. Mohammadi, F. Mahboubi Amirkabir University of Technology, Tehran

CCFA-380-1 Investigation of Composite Membranes by Developing Mesoporous Alumina Layer on Stainless Steel Substrate1S. Abedini, 1N. Parvin, 2P. Ashtari1Amirkabir University of Technology, Tehran2Nuclear Science & Technology Research Institute, Tehran

CCFA-392-1 Preparation of nylon-6/TiO2 nanofiber composite via electrospinning as a novel humidity sensor

A. Hosseinmardi, M. Keyanpour-Rad, F. Alikhani HesariMaterials and Energy Research Center (MERC), Tehran

CCFA-403-1 Prediction the Temperature-Dependent Thermo-Physical Properties of Elastomeric Composite at High Temperature F. Arabgol , M. Kokabi , A.R BahramianTarbiat Modares University, Tehran

12

CCFA-424-2 ROOM TEMPERATURE STUDY OF A LOW PROFILEED UNSATURATED POLYESTER RESIN1L. Zare, 2M. Beheshty, 2M. Vafayan1South Tehran branch, Islamic Azad University2Iran Polymer and Petrochemical Institute, Tehran

CCFA-442-1 Numerical investigation of micro-buckling failure mode in composite materialsM.Z. Kabir and H. ZadmehrAmirkabir University of Technology, Tehran

CCFA-495-1 Preparation of NiP-TiO2 Nano-Composite Coatings by Electroless Method and Investigating their PropertiesS. Salmi, E. Tohidlou, S.R. Allahkaram University of Tehran

CCFA-499-1 Investigation of effective parameters on dynamic behavior of laminated a sandwich plate with composite skins1O. Bavi and 1M. Sadighi and 2N. Bavi1Amirkabir University of Technology, Tehran2Shahid chamran University, Ahvaz

CCFA-522-1 Stress Analysis of Grid Cylindrical Composite Shells under Axial CompressionGH.Rahimi, S.Yazdani and M.GhanbariTarbiat Modares University, Tehran

CCFA-546-1 Synthesis of titania nanoparticles using a nonionic water-in-oil microemulsionMahnaz karbassi, Ali. Nemati and Maryam.Hosseini Zori.Sharif University of Technology, Tehran

CCFA-595-1 Tribological Behavior of TiN/Al Nano-composite Surface Layer Fabricated by Friction Stir ProcessingM. Mansumi and S. F. Kashani-BozorgUniversity of Tehran

CCFA-596-1 Application and performance of composite materialsM. Khatamirad and A. HosseiniUniversity of Tehran

CCFA-612-1 Polymeric Nanocomposite Membranes as High-Performance Materials for Fuel Cells ApplicationsS. E. Shakeri, M. Tohidian, S.R. Ghaffarian, E. Dashtimoghadam, M. . Hasani-SadrabadiAmirkabir University of Technology, Tehran

CCFA-641-1 Temperature Effect on Monotonic Strength of FRP Composite Laminates with Various Lay-ups H. Mivehchi , A. Varvani-FarahaniRyerson University, Canada

CCFA-578-1 Crystallization Behavior in Interface of Flouromica-Diopside Glass-Ceramic Composits1P. Shahsavari, 2A. Zandi Karimi, 1B. Eftekhari Yekta, 1V. Marghusian, 2A.Hadian1Iran University of Science and Technology, Tehran2University of Tehran

13

CCFA-630-1 Optimal Design of Laminated CompositesM. Reza AhmadianPole Universitaire Leonard de Vinci, France

CCFA-128-1 SEA and Analytical model of sound transmission loss through Sandwiches Shells lined with poroelastic materialsM. Amirpour Molla , R. Talebitooti and M.H.ShojaeefardIran University of Science and Technology, Tehran

CCFA-182-1 Fabrication of porous composite scaffold from poly(lactic-co-glycolic acid)/Hydroxyapatite coated with a biodegradable triblock copolymer1,2Masoume Haghbin Nazarpak, 1,3Farzaneh Pourasgari, 1Mohammahdnabi Sarbolouki1Amirkabir University of Technology, Tehran2University of Tehran3Stem Cells Technology Research Center, Tehran

CCFA-141-1 Application of new type of advanced composites: nano core shell composites1Sh. Khameneh Asl , 2S.K. sadrnezhaad, 3M. Kianpour rad, 4M.R. Vaezi1,3,4Materials and Energy Research Center, Tehran2Sharif University of Technology, Tehran

CCFA-73-1 Analytical and Numerical Investigation of the Axi-symmetric Extrusion of Bi-metallic TubesH. Haghighat and G.R. AsgariRazi University, Kermanshah

CCFA-108-1 A Study on the fracture behavior of polyethylene/calcium carbonate nanocomposites using the essential work of fracture (EWF) methodM.S. Mohsenzadeh, S.M. Zebarjad and M. MazinaniUniversity of Mashhad

CCFA-95-2 The role of silicon compounds in strengthen and density of Aluminasilicate based materials composites1E Karamian, 1A Monshi and 2A Bataille1Isfahan University of Technology2Université Lille 1, Science and Technologie Université, France

CCFA-86-1 Comparative Thermal Conductivity Modeling of TiO2/Germanium NanocompositesA.B. Kasaeian, M. Mosalla, Y. MoharrerAzad University,Abhar Branch

CCFA-11-1 Influence of Nanolayered Silicates on Properties of Wood Flour-Polypropylene NanocompositesB.Kord Islamic Azad University, Chalous Branch

CCFA-144-1 The effect of silane crosslinking on the physical properties of high density polyethylene/wood flour composites1A. Shakeri and K. 2Oksman1Golestan University, Gorgan2 Lulea University of Technology, Sweden

CCFA-295-1 Effect of addition of magnesium sulphate on strength development of Sorel cement-20% SiC compositeY. Karimi and A. MonshiIsfahan university of Technology

14

CCFA-111-1 Fabrication and tribological behavior of electroless Ni-P-CNT composite coatingM. Alishahi, S.M. Monirvaghefi and A. SaatchiIsfahan University of Technology

CCFA-138-1 Axisymmetric Static Analysis of Functionally Graded Material Cylinders by a Mesh-Free MethodM. Foroutan, R. Moradi-Dastjerdi, R. Sotoodeh-BahreiniRazi University, Kermanshah

CCFA-210-1 Preparation of Cubic/Tetragonal Composite Electrolytes Through Stabilizer Coating Method Using Zirconia Polymeric SolutionM. GhateeShahrood University of Technology

CCFA-61-2 A New Simple Approach Analysis for Free Vibration of Laminated PlatesP. Yousefi , J. E. JamIAU-Arak & C. C. MUT-Tehran

CCFA-178-1 Investigation of Thermal Conductivity and Mechanical Strength of Carbon Epoxy Composites and Aluminum Reinforcer1M R Vaseghi, 2F Jalali1Islamic Azad University – Shiraz Branch2Shahid Beheshti University, Tehran

CCFA-241-1 Corrosion resistance of electroless Ni-P-Al2O3 composite coating on low carbon steel in 3.5% sodium chloride solutionl. Karimi, R. Azari khosroshahi, N. Parvini AhmadiSahand University of Technology, Tabriz

CCFA-18-3 Experimental and Numerical Investigation of Mixed- Mode Interlaminar Fracture of Carbon-Polyester Composite Using Arcan SpecimenM. H. Heydari, N. ChoupaniSahand University of Technology, Tabriz

CCFA-311-2 Free Vibration of Simply Supported Rectangular Composite Plates with Patch MassR. Akbari Alashti and R. AlibakhshiBabol University of Technology

CCFA-127-1 Investigation on effects of sic nanoparticles and nanowhiskers on mechanical properties of sic/epoxy nanocomposites1A. Zadhoush, 1M. Naeimirad, 2R. Esmaeely-N, 1H. Ghayoor1Isfahan University of Technology2Azad University of Majlesi

CCFA-436-1 Structure and Glass Transition Temperature of PMMA/Clay nanocomposites synthesized through in situ-Reversible Addition-Fragmentation Transfer (RAFT) PolymerizationA.H. Navarchian, Sh. Sadeghi-Ardakani University of Isfahan

CCFA-272-1 Investigation of Delamination Failure Externally Bonded Shear FRP-ReinforcementM.J.Esfandiary, H.A.Rahimi BondarabadiYazd University

15

CCFA-183-1 Dynamic analysis of composite plates on the viscoelastic foundation subjected to moving oscillator using FSM1M.Heshmati, 1M.H.Yas and 2Y.Amini1Razi University of Kermanshah2Shiraz University

CCFA-320-1 Analysis of Thick Laminated Composite Plates on Elastic Foundations by Exponential Basis Functions; A Meshfree ApproachM. Shahbazi and B. BoroomandIsfahan University of Technology

CCFA-130-1 Axisymmetric Dynamic Analysis of Functionally Graded Material Cylinders by a Mesh-free Method1R. Moradi-dastjerdi , 2M. Foroutan, 3H.R. MollaraziRazi University, Kermanshah

CCFA-177-2 Effect of Cut-out Orientation and Location on Stress Concentration Factor in a Composite Plate under Transverse Static Loading1H. Torabi, 2M.Fallah and 2M. Mohammad Amini1Islamic Azad University, Mashhad Branch2Ferdowsi University,Mashhad

CCFA-195-2 Effect of Nanofillers on the properties and corrosion performance of epoxy composite coating1Vahid Rahmanian, 2Amin Rafiee Karkevandi, 1Amin Torabi, 3Hedieh Bahadori, 1Ali Nayeri1Islamic Azad University, Shiraz branch2Islamic Azad University, Najaf Abad branch3University of Kurdistan

CCFA-102-1 Two dimensional wave propagation in thick short length FGM cylindersK. Asemi, M. Salehi and M. AkhlaghiAmirkabir University of Technology, Tehran

CCFA-106-1 CURING BEHAVIOR, KINETICS AND MORPHOLOGY OF HOT CURED UNSATURATED POLYESTER/NANO-CLAY NANOCOMPOSITE RESIN WITH DUAL INITIATORS1N. Naderi, 2M.H. Beheshty, 3S. Mazinani1South Tehran branch, Islamic Azad University2Iran Polymer and Petrochemical Institute, Tehran3Amirkabir University of Technology, Tehran

CCFA-110-1 Investigation on Microstructure of Transient Liquid Phase Diffusion Bonded Joints of Al/Mg2Si Metal Matrix CompositeH. Nami, A. Halvaee and H. AdgiUniversity of Tehran

CCFA-120-1 Synthesis of alumina-mullite nanopowder using AlCl3.6H2O & colloidal silica via Sol–gel method1A. Sedaghat, 2E. Taheri-Nassaj, 2G.D. Soraru, 3R. Ceccato, 1T. Ebadzadeh1Tarbiat Modares University, Tehran2University of Trento, Italy3Materials & Energy Research Centre, Tehran

16

CCFA-122-1 Buckling of Piezoelectric Functionally Graded Material BeamsY. Kiani, E. Bagherizadeh and M. R. EslamiAmirkabir University of Technology, Tehran

CCFA-126-3 PP/Nanoclay/CaCO3 Ternary Nanocomposite: A Review1M.R. Mozdianfard, 2Y. Zare1University of Kashan2Amirkabir University of Technology, Tehran

CCFA-151-1 A simple model for simulation of mode I strain energy release rate of a rectangular laminated compositeM. M. Shokrieh and M. GhajarIran University of Science and Technology, Tehran

CCFA-154-2 Morphology and creep behavior of LDPE/CaCO3 nanocompositesHadi Khosrojerdi, Amir Abedi, Faramarz AshnaghasemiRajaee Teacher Training University, Tehran

CCFA-160-1 Modeling and experimental characterization of compressive properties of 3D woven glass-fiber sandwich compositesS. A. Hosseini and M. SadighiAmirkabir University of Technology, Tehran

CCFA-161-1 Microstructure and Mechanical Properties of Natural Rubber/Organoclay/NanoCalcium Carbonate Ternary Nanocomposites: Effect of Mixing Sequence1H. Sadeghi Ghari, 2A. Jalali Arani and 3M. Sahami1Amirkabir university of Technology, Mahshahr Campus

2Amirkabir university of Technology, Tehran3Islamic Azad university, Shiraz Branch

CCFA-162-1 An experimental study on the effect of mesoporous silica and nanoclay addition on the ionic conductivity of poly(ethylene oxide) solid electrolytes1Z.Shakouri, 2N.Taheri Qazvini, 3M.Karimi and 1S.Ghanbar1Amirkabir University of Technology, Mahshahr campus2University of Tehran3Amirkabir University of Technology, Tehran

CCFA-164-1 Electrodeposition of bronze-SiC composite coatings employing a non-cyanide solution1Majid Asnavandi, 2Davoud Haghshenas Fatmehsari, 1Mohammad Ghorbani1Sharif University of Technology, Tehran2Amirkabir University of Technology, Tehran

CCFA-167-1 A New Friction Stir Processing Method for Fabricating AZ91/SiC Nano-composite1M. Taherishargh, 1N. Parvin, 1H. Omidvar, 2P. Asadi and 2M. Barmous1Amirkabir University of Technology, Tehran2University of Tehran

17

CCFA-19-2 Matrix Crack and Delamination Analyses in Composite Laminates by FEM Based Micromechanical ApproachH. Hosseini-Toudeshky1, B. Mohammadi2 and H.A. Rashtiyani1Amirkabir University of Technology, Tehran2Iran University of Science & Technology, Tehran

CCFA-217-1 High Mechanical Properties of Electrocodeposited Cu-Al2O3 Nano Composite Coating Setareh Golrooh, Saeed Reza Allahkaram , Morteza MohammadalipourUniversity of Tehran

CCFA-24-1 A stress wave propagation analysis of lightweight compositesA. Asadi and A. Sadough VaniniAmirKabir University of Technology, Tehran

CCFA-250-1 Optimization of sintering conditions for Al/SiC composites fabricated by PM method and the effect of holding time at high temperatures on composite properties1S. Moemeni, 2S. Shahrabi and 3K. Maysami1University of Tehran2Materials and Energy Research Center, Meshkindasht, Karaj3Iran University of Science and Technology, Tehran

CCFA-25-2 Optimum Design of Composite Laminates for Strength and StabilityBehrooz Farshi and Seyyed Reza Mohammadi Iran University of Science and Technology, Tehran

CCFA-255-1 Stress transfer modeling in viscoelastic polymer matrix composites with an internal damage1M. M. Attar and 2M. Haghpanahi1Islamic Azad University, Hamadan Branch2Iran University of Science & Technology, Tehran

CCFA-255-2 Micro mechanisms of load transfer in a hybrid unidirectional fiber–reinforced epoxy composite with broken fibers1M. M. Attar and 2M. Haghpanahi1Islamic Azad University, Hamadan Branch2Iran University of Science & Technology, Tehran

CCFA-278-1 Microstructural Examination of Al2O3-10vol.%SiCNano-composites Densified by pressure assisted sinteringA. Hadian1, A.Ataie1, H.R.Baharvandi2 and P.Shahsavari3

1University of Tehran2University of MalekAshtar, Tehran3Iran University of Science and Technology, Tehran

CCFA-282-7 The influence of Boron on Properties of Al–15%Mg2Si in situ compositeMortaza Azarbarmas, Masoud Emamy, Jafar Rasizadeh, Mohammad Alipour and Mostafa karamouzUniversity of Tehran

18

CCFA-289-1 Buckling Analysis of Composite Laminates with Through-The-Width Delamination Using a Novel Layerwise Theory1H. Ovesy, 2M. Kharazi, and 1M. Asghari Mooneghi1Amirkabir University of Technology, Tehran2Sahand University of Technology, Tabriz

CCFA-317-1 Comparison between monotonic and fatigue loadings responses of CFRP retrofitted RC beamsM. Z. Kabir and A. Hojatkashani Amirkabir University of Technology, Tehran

CCFA-36-1 Experimental study on fracture behavior of rubber-toughened epoxy in bulk and laminated composite specimensH. Pakdel and M. Abbasi and M. A. KuchakzadehSharif University of Technology, Tehran

CCFA-592-1 Ballistic Impact Perforation into GLARE Targets, Part II: Target Optimization Hamed Ahmadi, Gholam Hossein Liaghat, Hadi SabouriTarbiat modares university, Tehran

CCFA-68-1 NANOCOMPOSITES BASED ON COMPATIBILIZED TERNARY BLENDS OF PP/EPDM/PA6: Microstructure1Shirin Shokoohi, 1Ahmad Arefazar and 2Ghasem Naderi1Amirkabir University of Technology, Tehran2Iran polymer and petrochemical institute, Tehran

CCFA-382-1 B4C nanowire reinforcements Synthesis from carbon templateM.Salehi, A. R. Mirhabibi, M. Tamizifar, M. Moshref Javadi, M. KarbalaieIran University of Science and Technology, Tehran

CCFA-510-1 Numerical Simulation of the R/C Beams Strengthened by FRP Strips by NSM MethodM.S. Karimi, M. Nasseri, E. MaroofiSemnan University

CCFA-569-1 The effect of adding nano size clay particles on the dimensional characteristic of POM composite gearsA.Nezami-Fard, E. Ashrafi, K. Shelesh-Nezhad University of Tabriz

CCFA-435-1 Fabrication of polymer-piezoceramic composites1Maasoume Maasoumi, 1Masoud Mohebi and 2Amir Maghsoudipour1Imam Khomeini International University, Qazvin2Materials & Energy Research Center, Tehran

CCFA-620-1 Synthesis and structure evaluation of MoSi2 – Mo5Si3 compositeM. Erfanmanesh, S.R. Bakhshi and M.SalekbafghiMalek-ashtar University of Technology, Isfahan

CCFA-330-2 Sensitivity analysis for multi-layered piezoelectric micropumpP.M.Keshtiban, N.Ezzati and O.TaheriUrmia university of Technology

19

CCFA-609-1 Investigation of Strengthening of Reinforced Concrete Members with FRP Composites in Lab1P. Baseri, 2M.R. Sohrabi and 1E. Keshavarzi1Islamic azad university, Zahedan2University of Sistan and Baloochestan

CCFA-126-1 Application of Composite Theories for Modeling Tensile Modulus of PP/Nanoclay/CaCO3 Hybrid Nanocomposite1M.R. Mozdianfard, 2Y. Zare1University of Kashan2Amirkabir University of Technology, Tehran

CCFA-354-1 Study of deposition, micro-hardness and wear resistance of electroless Ni-P-BN composite coatingsE. Laali, M. H. PaydarShiraz University

CCFA-462-1 Vibration of Sandwich Beams with ER Core and Laminated Faces R. Tabassian and J. RezaeepazhandFerdowsi University of Mashhad

CCFA-516-1 Modified nanosilica/ HDPE-g-MA coating on steel by cast-solution method: Superhydrophobicity and corrosion resistanceA.Seifi, R. Bagheri, M.A. Golozar and A.KhoddamiIsfahan University of Technology

CCFA-582-1 Investigation of the Microstructure and Wear Behavior Of InSitu High Chromium Steel/TiC Composites1H. Beygi, 2E. Tohidlou, 3M.R. Rahimipour1Ferdowsi University of Mashhad2University of Sistan and Baluchestan3Materials and Energy Research Centre, Tehran

CCFA-218-1 Microstructures and Mechanical properties of 5052Al/Al2O3 surface composites fabricated by friction stir processingE. Tohidlou, Z. Ostovar, A. Sarani, M. Sharifitabar, S. KhorshahianSistan & Balouchestan University

CCFA-704-1 Buckling of a Laminated Column with Transverse CrackS. H. R. Sanei and J. RezaeepazhandFerdowsi University of Mashhad

CCFA-412-1 Analyzing elastic properties of sandwich panels with cellular cores made of composite laminatesA. A. Atai and A. Sadeghian Islamic Azad University, Karaj Branch

CCFA-432-1 Synthesis and characterization of nano composite of minoxidil-zinc oxideNasrin Shahsavan, Maryam Ranjbar, Mohammad Yousefi, S. Heydar Mahmodi NajafiShahreray Azad University, Tehran

CCFA-453-2 Effect of Fibers Addition and nano colloidal on Mechanical Properties of SCC CompositesA. A. Maghsoudi, A.R. Dortaj Nejad, M. MaghsoudiShahid Bahonar University, Kerman

20

CCFA-470-2 Comparison of structure and properties of nano silica particles fabricated from rice husk by Chemical and thermal methodsA. Sedghi, S. BiglariImam Khomeini International University, Qazvin

CCFA-524-1 Effect of Aging Time on Synthesis of Sol-Gel Derived Bioglass-58S NanopowdersS. Joughehdoust and S.A. ManafiIslamic Azad University-Shahrood Branch

CCFA-548-1 The effect of Nb addition on nanostructured NiTi intermetallic compound synthesized by mechanical alloyingM. Rahmdel, M. H. Abbasi, M. H. Enayati and F. KarimzadehIsfahan University of Technology

CCFA-585-1 Structural evolution of Al and Al-10Mg matrix nanocomposites reinforced with Al2O3 particles during high-energy ball millingJ. Safari and G. H. AkbariShahid Bahonar University of Kerman

CCFA-240-2 Manufacture of armatureless reinforced concrete by using of carbon nanotubes composite and silica nanoparticlesM.R. Foroughi, H. Salehbarmi, A. MonshiIslamic Azad University, Najafabad branch, Isfahan

CCFA-439-1 Formation and Characterization of Ni-P-CNT Composite Coatings For Solar Absorber Application1M. Hosseini Najafabadi, 1F. Ashrafizadeh, 1M. Monirvaghefi and 2H. Saleki Najafabadi1Isfahan University of Technology2University of Guilan

CCFA-459-1 Synthesis of Mo–Si–B nanocomposite powders by mechanical alloying and subsequent heat treatmentA.R. Abbasi, M. ShamanianIsfahan University of Technology

CCFA-464-2 Synthesis of particulate in situ Aluminium-Alumina composite by using aluminothermic reactionsM. Sanayei,M. Meratian, M. Panjepour, A.M. ParvanianIsfahan University of Technology

CCFA-482-1 The investigation on role of nano size calcium carbonate particles in a MDFE on its resistant against perforationF.Hosseinabadi, S.M.Zebarjad, M.Mazinani, N. ModghanFerdowsi University Of Mashhad

CCFA-513-1 Production and characterization of nanostructured (FeCoNb) WC composite powder K. Saeidi, Mi. Karbasi and A. MonshiIsfahan University of Technology

CCFA-523-2 Reclamation of metal matrix composite scraps and production of cellular composite materialsA.M. Parvanian, M. Panjepour, M. Meratian and M. SanayeiIsfahan University of Technology

CCFA-690-1 Study the Effect of Stacking Sequence on Delamination mode at free Edge Laminated Plates using FEM1Ramadan A. Al-Madani and 2Salleh R. Gashoot1Al-Jabel Algharbi University, Gharian, Libya2Al-Fateh University, Tripoli, Libya

21

CCFA-229-2 Thermal Analysis of Repaired and Reinforced Steel Pipe with Composite Materials Z. Hooshyar, H. Haghighat and S. JavadpourShiraz University

CCFA-502-4 Electrical conductivity activation energy of cobalt-composite-coated interconnects used in solid oxide fuel cell H. Ebrahimifar and M. Zandrahimi Shahid Bahonar University of Kerman

CCFA-533-2 Thermal and impact study of PP/PET fiber composites compatibilized with Glycidyl Methacrylate and Maleic Anhydride M.Asgari and M.MasoomiIsfahan University of technology

CCFA-559-1 The Application of Single Wall Carbon Nanotube to Synthesis Glucose Biosensor A.Farahbakhsh, H.A. Zamani, S. K. Rahimi and S. SohrabiQuchan branch, Islamic Azad University

CCFA-561-1 Effects of sulfite waste fibers incorporating silica nano-particles on mechanical and microstructural properties of cementitious compositeR.Hosseinpour pia 1, A.Varshoee1, M.Soltani1, P.Hosseini 2, M.Talaeipoor3

1,2,3Islamic Azad University, Chalous branch2Sharif University of Technology, Tehran3Islamic Azad University, Tehran

CCFA-115-1 Improving the hardness and wear resistance of magnesium alloys by TIG composite surfacing with Al+Al2O3

M. R. Elahi, M. Heydarzadeh Sohi, J. Rassizadehghani, A. Gh. SafaeiUniversity of Tehran

CCFA-92-1 2D and 3D Interlaminar Fracture Evaluation of Unidirectional Carbon/Epoxy Arcan Specimens1R. Bakhtiari, 1N. Choupani, 2A. Sharifi, 2M. Heidari, 2M. Mokhtari1Sahand University of Technology, Tabriz2Islamic Azad University, Karaj branch

CCFA-71-2 Undesirable Sudden Curing of Epoxy/Clay Nano-composites in VARTM Manufacturing Process1M. H. Pol, 2F. Hajiarazy, 2Gh. Liaghat and 2S.M.H. Seyedkashi1 Institute of Manufacturing Technology Research, ACECR, Ahvaz2 Tarbiat Modares University, Tehran

CCFA-370-1 Multiwall Carbon Nanotube Application in Co-cured Adhesive Joints of E-glass/epoxy Laminates and Al- 2024-T31B. Ahmadi Moghadam, 2 F. Taheri- Behrooz, 1 A. Fereidoon1Semnan University2Iran University of Science and Technology, Tehran

CCFA-705-1 Aeroelastic Instability Analysis of a Double-Tapered Composite Wing-Box Using Refined Dynamic Finite ElementsS.R. Borneman, S.M. Hashemi , H. AlighanbariRyerson University, Canada

CCFA-622-1 An Experimental Investigation on Physical and Mechanical Properties of WPC Extruded Profiles P. Shahi, A.H. Behravesh, S.Y. Daryabari, E. Souri Tarbiat Modares University, Tehran

22

CCFA-553-1 Effect of Carbide particles on tribological properties of phenolic resin1M. Atarian, 1A. Shokuhfar and 2H. R. Salehi1K.N. Toosi University of Technology, Tehran2Amirkabir University ,tehran

CCFA-454-2 Analytical Solution for Two-Dimensional Dynamic Response Analysis of Functionally Graded Thick Hollow Cylinder with Finite Length Subjected to Impact LoadingA. Safari, M. Tahani and S. M. HosseiniFerdowsi University of Mashhad

CCFA-521-1 Production of Nanoclay from a raw Montmorillonite sample1A. Ebrahimi, 1A. Sarrafi and 2M. Tahmooresi1Shahid Bahonar University of Kerman2International Center of Science, High Technology and Environmental Science, Kerman

CCFA-280-1 An Object Oriented Finite Element Method to Analyze Random Short Fiber CompositesA. Zadhoush, D. Semnani, H. Ghayoor, M. NaeimiradIsfahan University of Technology

CCFA-142-1 A new analytical-numerical design approach for composite landing gears of light aircrafts1Mehdi Afshin, 2Fathollah Taheri-Behrooz, and 3Khashayar Tahzibi1Amirkabir University of Technology, Tehran2Dalhousie University, Canada3Iran University of Science and Technology, Tehran

CCFA-444-1 Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites V. Daghigh, S.M.R. Khalili, R. Eslami FarsaniIslamic Azad University, South Tehran Branch

CCFA-131-1 Microstructure and Mechanical Properties of Al/Ni Composite Sheets Produced by Accumulative Roll Bonding (ARB)A. Akbarzadeh and B. Rezaei AnvarSharif University of Technology, Tehran

CCFA-171-1 Microstructure Characterization and Mechanical Properties of Al-SiCp CompositesG. Hemth Kumar, M. Sreenivasan, N. Dillip Raja and H. MohitVel Tech Rangarajan Dr. Sakunthala R & D Institute of Science and Technology, Avadi

CCFA-63-1 Microstructure and hardness properties of composite layers fabricated by TIG surface alloying of Ti-5Al-2.5Sn with titanium and graphite mixed powdersA.Gh. Safaei, M. Heydarzadeh Sohi, J.RassizadehghaniUniversity of Tehran

CCFA-607-1 Plasma Spray Spinel-MgO Composite Coatings on Steel SubstrateM.Zarei , M.Salehi , A.MonshiIsfahan University of Technology

23

CCFA-533-1 Improvement of the interfacial adhesion of epoxy/UHMWPE fiber composites by grafting of GMA on the fiberM.Masoomi and M.sadeghiIsfahan University of Technology

CCFA-10-2 Modal Analysis of Composite Lattice Plate1B. Eftari, 1S. H. Taghavian, 1J. E. Jam, 1M. Yusef Zadeh, 2B.Fathi1MUT University of Technology, Tehran2 Iran R&D center for chemical industry (IRDCI)

CCFA-313-1 Load Capacity Assessment of a Braided Textile Composite Bone Plate under Combined Loading Using 3D-Finite Element1A. Zargar Kharazi, 1M.H. Fathi, 2F. Bahmany , 2H. Fanian1Isfahan University of Technology2Isfahan University of Medical Sciences

CCFA-269-1 Study on Behavior of Squat Shear Wall Retrofitted with FRP LaminatesA. Khaloo, F.Shadan, P.ShadanSharif University of Technology, Tehran

CCFA-706-1 Mechanical properties improvement of wheat straw composite panels via silan treatment and using amino-resinsT. Tabarsa , M. MohamadiGorgan University of Agricultural Sciences and Natural Resources

24

· web viewdecember 27, 2010. 8:30-18:00. on-site registration. 8:30-9:30. open ceremony /...

Documents