vision statement...ntm, inc. 151 longfellow street n.e. minneapolis, mn 55432 phone: 763-780-1420 |...
TRANSCRIPT
NTM, Inc. 151 Longfellow Street N.E.
Minneapolis, MN 55432 Phone: 763-780-1420 | 800-274-4686
Email: [email protected] www.ntminc.com
Vision Statement
NTM PROVIDES THE FINEST CUTTING TOOLS, SERVICES
AND MACHINED PRODUCTS FOR OUR CUSTOMERS
Mission Statement
Core ValuesDEDICATION
INNOVATION
LOYALTY
POSITIVITY
INTEGRITY
Made in USA
Family Owned and Operated since 1976, NTM Inc.has been proudly supplying quality products and services
made in the USA for over 43 years.
HELPING MANUFACTURERS SUCCEED
INDEX1-800-274-4686 www.ntminc.com
Products & ServicesMCLN-MWLN
-MTLN
SCLP
SCLC
SDUP-SDUC
STFC-STFP
SWLP-SWLO
SWLC-STJO
STUP-STUC
STUN-CTFP
NELL-NKLC
LSER-NER
MCLN- MWLN
-MTLN
SCLP-SCLC
SDUP-SDUC
SWLP-SWLO
STFC-STFP
STUP-STUC
STUN-CTFP
STJO-NER
NELL-NKLC
page - 15
page - 16
page - 17
page - 18
page - 19
page - 20
page - 21
page - 22
page - 23
page - 24
page - 25
page - 26
page - 27
page - 28
page - 29
page - 30
page - 31
page - 32
page - 33
page - 34
Boring Bars
Steel
Carbide
Magnetic V-Blocks
Custom Carbide Tool Grinding
Sharpening Capabilities
Custom Indexable Tooling
Smart Flow Swiss Holder
Stubby Advantage
Stubby Drill
NU-Heads
Same day shipping
Boring Bar Identification
page - 4
page - 5
page - 6
page - 7
page - 8 & 9
page - 10
page - 11
page - 12
page - 13
page - 14
Made In USA
SMART FLOW SWISS HOLDERS
1-800-274-4686 www.ntminc.com
SMART FLOWTM
“One Stop Tooling and Machine Shop”
Inc.
Innovation NTMspeaks loudly and has captured the leading
edge of Swiss Tooling with our Patented Smart Flow tool holder.
This tool will not only deliver cutting oil to the tip of the insert,
but will also direct a stream of oil towards the next tool station.
This allows for fluid to be directed at an additional tool and
keep chips out of the work zone.
offers three different pocket styles. The 35°, 55°and theNTM
80° in two shank sizes, the 1/2” and 5/8”.
Swiss Tooling System
Call us TODAY!!
A MUST
for any Swiss Machine!
8
PATENTED
Made In USA
HOLDERSWISS STYLE
SCLCR*Turning & Facing
*Uses CCMT insert
Catalog N um ber Shank L F H Ins e rt Scre w Insert
(ove r ins e rt) (ove r ins e rt) (ove r ins e rt)
SW-SCLCR 083C 0.5 4.25 0.5 0.5 TS-4 CCMT 32.52
SW-SCLCR 103C 0.625 4.25 0.625 0.625 TS-4 CCMT 32.52
Item No Part Number Part Description Qty
1 see below Insert (not included) 1
2 see below Tool Holder 1
3 SW 4-40 SET SCREW 4-40 Set Screw / Plug 1
4 TS-4 M4 X .7 Insert Screw 1
5 SW 1/8-27 FITTING 1/8-27 NPT-JIC 4 1
6 SW 1/8-27 PLUG 1/8-27 NPT Set Screw Plug 1
6
5
1
4
3
2
COOLANT/OIL HOLE
SMART FLOW TM
COOLANT/OIL HOLE
Catalog N um ber Shank L F H Ins e rt Scre w Insert
(ove r ins e rt) (ove r ins e rt) (ove r ins e rt)
SW-SDJCR 083C 0.5 4.25 0.5 0.5 TS-4 DCMT 32.52
SW-SDJCR 103C 0.625 4.25 0.625 0.625 TS-4 DCMT 32.52
SDJCR*Turning & Profile
*Uses DCMT insert
Catalog Number Shank L F H Ins e rt Scre w Insert
(ove r ins e rt) (ove r ins e rt) (ove r ins e rt)
SW-SV JBR 082C 0.5 4.25 0.5 0.5 MS-1153 V BMT 221
SW-SV JBR 102C 0.625 4.25 0.625 0.625 MS-1153 V BMT 221
SVJBR*Turning & Profile
*Uses VBMT insert
9Made In USA
SMART FLOWTM
Stubby®
drills are manufactured to the highest quality standards. They are
designed with shorter flute lengths and shanks that fit standard collet and
endmill holders. The shorter flute length gives drills greater rigidityStubby®
which translates into higher production rates and extended insert life.
Add “C” to the end of the
part number for coolant
thru i.e. NTD-20C
NTDStub length
Indexable Drills*Uses W29 insert
1-800-274-4686www.ntminc.com
11
Drills
Made In USA
®
Catalog Number D L1 L Shank Dia Insert Screw Insert
NSD-12 3/4" Ø 1-1/2" 3" 5/8" Ø TS4 WCMT-32.52
NSD-14 7/8" Ø 1-3/4" 3-1/2" 3/4" Ø TS4 WCMT-32.52
NSD-16 1" Ø 2-1/4" 4" 3/4" Ø TS4 WCMT-32.52
NSD-18 1-1/8" Ø 2-3/4" 4-1/2" 1" Ø TS4 WCMT-32.52
NSD-20 1-1/4" Ø 2-3/4" 4-1/2" 1" Ø TS4 WCMT-32.52
Catalog Number D L1 L Shank Dia Insert Screw Insert
NTD-09 9/16" Ø 1-1/2" 3" 1/2" Ø N0056040 W29.10010.04
NTD-10 5/8" Ø 1-1/2" 3" 1/2" Ø N0056040 W29.10010.04
NTD-12 3/4" Ø 1-1/2" 3" 5/8" Ø N0056040 W29.10010.04
NTD-14 7/8" Ø 1-3/4" 3-1/2" 3/4" Ø N0057552 W29.18010.04
NTD-16 1" Ø 2-1/4" 4" 3/4" Ø N0057510 W29.24010.04
NTD-18 1-1/8" Ø 2-3/4" 4-1/2" 1" Ø N0057510 W29.24010.04
NTD-20 1-1/4" Ø 2-3/4" 4-1/2" 1" Ø N0057510 W29.24010.04
Add “C” to the end of the
part number for coolant
thru i.e. NSD-20C
[email protected] 1-800-274-4686NTM Inc. Mpls, MNwww.ntminc.com
13
*Ø5/8” and up need to be ordered by 10:30 AM central time for guaranteed Same Day shipping.
Boring Bar Identification
C12M-SCLCR-3
Bar Cut
L Left Hand
R Right Hand
Insert Size
1.5 .187 IC
1.8 .218 IC
2 .250 IC
3 .375 IC
4 .500 IC
Lead Angle
F 0°
L -5°
U -3°
J -2°
1-800-274-4686
www.ntminc.com
14
Insert Clamping
M Multi Clamp
N Top Notch Clamp
S Screw Down
C Top Clamp
Insert
C 80° Diamond
D 55° Diamond
T 60° Triangle
V 35° Diamond
W 80° Trigon
Insert Clearance
Angle
C 7°
N 0°
P 11°
O Specific Description
Bar Type
A Steel Bar w / Coolant
C Solid Carbide Bar
D Heavy Metal Bar
E Carbide Bar w / Coolant
S Steel Bar
Made In USA
Bar Ø03 3/16" Ø
04 1/4" Ø
05 5/16" Ø
06 3/8" Ø
08 1/2" Ø
10 5/8" Ø
12 3/4" Ø
16 1.0" Ø
20 1.25" Ø
24 1.5" Ø
Bar LengthNone Stub
M 6"
R 8"
S 10"
T 12"
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert
C10-MWLNR-3 0.625 7" 0.44 0.76 CK-5 / STC-5 NL-33 WNMG-322
C10S-MWLNR-3 0.625 10" 0.44 0.76 CK-5 / STC-5 NL-33 WNMG-322
C12-MWLNR/L-3 0.75 7" 0.50 0.885 CK-6 / STC-5 NL-33 WNMG-322
C12S-MWLNR/L-3 0.75 10" 0.50 0.885 CK-6 / STC-5 NL-33 WNMG-322
C12-MWLNR-33 0.75 7" 0.50 0.885 CK-7 / STC-9 NL-33 WNMG-332
C12S-MWLNR-33 0.75 10" 0.50 0.885 CK-7 / STC-9 NL-33 WNMG-332
C16-MWLNR/L-3 1 7" 0.625 1.135 CK-6 / STC-5 NL-33 WNMG-322
C16T-MWLNR/L-3 1 12" 0.625 1.135 CK-6 / STC-5 NL-33 WNMG-322
C16-MWLNR-4 1 7" 0.625 1.135 CK-20 / STC-11 NL-44 WNMG-432
C16T-MWLNR-4 1 12" 0.625 1.135 CK-20 / STC-11 NL-44 WNMG-432
E20-MWLNR-4* 1.25 12" 0.765 1.47 CK-20 / STC-11 NL-46 WNMG-432
*Solid shank not available as a standard
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert
C16-MCLNR/L-4 1 7" 0.625 1.135 CK-20/STC-11 NL-44 CNMG-432
C16T-MCLNR/L-4 1 12" 0.625 1.135 CK-20 / STC-11 NL-44 CNMG-432
E20-MCLNR-4* 1.25 12" 0.765 1.47 CK-20 / STC-11 NL-46 CNMG-432
*Solid shank not available as a standard
Made In USA
carbide shank
“R” for right hand bar
“L” for left hand bar “C” for solid shank
“E” for coolant thru
MCLN*Boring & Facing*Uses CNMG insert
carbide shank
“R” for right hand bar
“L” for left hand bar“C” for solid shank
“E” for coolant thru
MWLN*Boring & Facing*Uses WNMG insert
Carbide Boring Bars
carbide shank
“R” for right hand bar“L” for left hand bar “C” for solid shank
“E” for coolant thru
MTLN*Boring & Facing*Uses WNMG insert
15
®
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert
C16-MTLNR-3 1 7" 0.625 1.135 CK-7 / STC-9 NL-33 TNGA-332
C16T-MTLNR-3 1 12" 0.625 1.135 CK-7 / STC-9 NL-33 TNGA-332
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C05-SCLPR/L-1.8 0.312 4-1/2" 0.219 0.385 MS-1152 CPMT-1.81.51
C05M-SCLPR/L-1.8 0.312 6" 0.219 0.385 MS-1152 CPMT-1.81.51
C05-SCLPR-2 0.312 4-1/2" 0.219 0.385 MS-1153 CPMT-21.51
C05M-SCLPR-2 0.312 6" 0.219 0.385 MS-1153 CPMT-21.51
C06-SCLPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 CPMT-21.51
C06M-SCLPR/L-2 0.375 6" 0.25 0.447 MS-1153 CPMT-21.51
C08-SCLPR/L-2 0.5 5" 0.312 0.572 MS-1153 CPMT-21.51
C08M-SCLPR/L-2 0.5 6" 0.312 0.572 MS-1153 CPMT-21.51
C08R-SCLPR/L-2 0.5 8" 0.312 0.572 MS-1153 CPMT-21.51
C08-SCLPR/L-3 0.5 5" 0.312 0.572 MS-1155 CPMT-32.52
C08M-SCLPR/L-3 0.5 6" 0.312 0.572 MS-1155 CPMT-32.52
C08R-SCLPR/L-3 0.5 8" 0.312 0.572 MS-1155 CPMT-32.52
C10-SCLPR/L-2 0.625 7" 0.406 0.728 MS-1153 CPMT-21.51
C10S-SCLPR/L-2 0.625 10" 0.406 0.728 MS-1153 CPMT-21.51
C10-SCLPR/L-3 0.625 7" 0.406 0.728 MS-1155 CPMT-35.52
C10S-SCLPR/L-3 0.625 10" 0.406 0.728 MS-1155 CPMT-32.52
C12-SCLPL-2 0.75 7" 0.5 0.885 MS-1153 CPMT-21.51
C12S-SCLPL-2 0.75 10" 0.5 0.885 MS-1153 CPMT-21.51
C12-SCLPR/L-3 0.75 7" 0.5 0.885 MS-1155 CPMT-32.52
C12S-SCLPR/L-3 0.75 10" 0.5 0.885 MS-1155 CPMT-32.52
C16-SCLPR/L-3 1 7" 0.625 1.135 MS-1155 CPMT-32.52
C16T-SCLPR/L-3 1 12" 0.625 1.135 MS-1155 CPMT-32.52
E20-SCLPR-3* 1.25 12" 0.765 1.47 MS-1155 CPMT-32.52
*Solid shank not available as a standard
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Carbide Boring Bars
carbide shank
“R” for right hand bar
“L” for left hand bar
“C” for solid shank
“E” for coolant thru
SCLP*Boring & Facing*Uses CPMT insert
16Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C05-SCLCR/L-2 0.312 4-1/2" 0.219 0.385 5513-020-03 CCMT-21.51
C05M-SCLCR/L-2 0.312 6" 0.219 0.385 5513-020-03 CCMT-21.51
C06-SCLCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 CCMT-21.51
C06M-SCLCR/L-2 0.375 6" 0.25 0.447 5513-020-03 CCMT-21.51
C08-SCLCR/L-2 0.5 5" 0.312 0.572 5513-020-03 CCMT-21.51
C08M-SCLCR/L-2 0.5 6" 0.312 0.572 5513-020-03 CCMT-21.51
C08R-SCLCR/L-2 0.5 8" 0.312 0.572 5513-020-03 CCMT-21.51
C08-SCLCR/L-3 0.5 5" 0.312 0.572 5513-020-09 CCMT-32.52
C08M-SCLCR/L-3 0.5 6" 0.312 0.572 5513-020-09 CCMT-32.52
C08R-SCLCR/L-3 0.5 8" 0.312 0.572 5513-020-09 CCMT-32.52
C10-SCLCR/L-2 0.625 7" 0.406 0.728 5513-020-03 CCMT-21.51
C10S-SCLCR/L-2 0.625 10" 0.406 0.728 5513-020-03 CCMT-21.51
C10-SCLCR/L-3 0.625 7" 0.406 0.728 5513-020-09 CCMT-32.52
C10S-SCLCR/L-3 0.625 10" 0.406 0.728 5513-020-09 CCMT-32.52
C12-SCLCR/L-3 0.75 7" 0.5 0.885 5513-020-09 CCMT-32.52
C12S-SCLCR/L-3 0.75 10" 0.5 0.885 5513-020-09 CCMT-32.52
C16-SCLCR/L-3 1 7" 0.625 1.135 5513-020-09 CCMT-32.52
C16T-SCLCR/L-3 1 12" 0.625 1.135 5513-020-09 CCMT-32.52
C16-SCLCR/L-4 1 7" 0.641 1.15 5513-020-17 CCMT-432
C16T-SCLCR/L-4 1 12" 0.641 1.15 5513-020-17 CCMT-432
E20-SCLCR/L-4* 1.25 12" 0.765 1.47 5513-020-17 CCMT-432
*Solid shank not available as a standard
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Carbide Boring Bars
carbide shank
“R” for right hand bar
“L” for left hand bar
“C” for solid shank
“E” for coolant thru
SCLC*Boring & Facing*Uses CCMT insert
17Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
carbide shank
“R” for right hand bar“L” for left hand bar “C” for solid shank
“E” for coolant thru
carbide shank
“R” for right hand bar
“L” for left hand bar
“C” for solid shank
“E” for coolant thru
Carbide Boring Bars
SDUP*Boring & Facing*Uses DPMT insert
SDUC*Boring & Facing*Uses DCMT insert
18Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-SDUPR/L-2 0.375 4-3/4" 0.375 0.5715 MS-1153 DPMT-21.51
C06M-SDUPR/L-2 0.375 6" 0.375 0.5715 MS-1153 DPMT-21.51
C08-SDUPR/L-2 0.5 5" 0.437 0.697 MS-1153 DPMT-21.51
C08M-SDUPR/L-2 0.5 6" 0.437 0.697 MS-1153 DPMT-21.51
C08R-SDUPR/L-2 0.5 8" 0.437 0.697 MS-1153 DPMT-21.51
C10-SDUPR/L-2 0.625 7" 0.5 0.822 MS-1153 DPMT-21.51
C10S-SDUPR/L-2 0.625 10" 0.5 0.822 MS-1153 DPMT-21.51
C12-SDUPR/L-3 0.75 7" 0.562 0.947 MS-1155 DPMT-32.52
C12S-SDUPR/L-3 0.75 10" 0.562 0.947 MS-1155 DPMT-32.52
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-SDUCR/L-2 0.375 4-3/4" 0.375 0.5715 5513-020-03 DCMT-21.51
C06M-SDUCR/L-2 0.375 6" 0.375 0.5715 5513-020-03 DCMT-21.51
C08-SDUCR/L-2 0.5 5" 0.437 0.697 5513-020-03 DCMT-21.51
C08M-SDUCR/L-2 0.5 6" 0.437 0.697 5513-020-03 DCMT-21.51
C08R-SDUCR/L-2 0.5 8" 0.437 0.697 5513-020-03 DCMT-21.51
C10-SDUCR/L-2 0.625 7" 0.5 0.822 5513-020-03 DCMT-21.51
C10S-SDUCR/L-2 0.625 10" 0.5 0.822 5513-020-03 DCMT-21.51
C12-SDUCR/L-3 0.75 7" 0.625 1.01 5513-020-09 DCMT-32.52
C12S-SDUCR/L-3 0.75 10" 0.625 1.01 5513-020-09 DCMT-32.52
Made In USA
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Carbide Boring Bars
carbide shank
“R” for right hand bar
“L” for left hand bar “C” for solid shank
“E” for coolant thru
carbide shank
“R” for right hand bar
“L” for left hand bar
“C” for solid shank
“E” for coolant thru
STFC*Boring & Facing*Uses TCMT insert
STFP*Boring & Facing*Uses TPMT insert
19
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-STFCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51
C06M-STFCR/L-2 0.375 6" 0.25 0.447 5513-020-03 TCMT-21.51
C08-STFCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51
C08M-STFCR/L-2 0.5 6" 0.312 0.572 5513-020-03 TCMT-21.51
C08R-STFCR/L-2 0.5 8" 0.312 0.572 5513-020-03 TCMT-21.51
C10-STFCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51
C10S-STFCR/L-2 0.625 10" 0.406 0.728 5513-020-03 TCMT-21.51
C12-STFCR/L-2 0.75 7" 0.5 0.885 5513-020-03 TCMT-21.51
C12S-STFCR/L-2 0.75 10" 0.5 0.885 5513-020-03 TCMT-21.51
C12-STFCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52
C12S-STFCR/L-3 0.75 10" 0.5 0.885 5513-020-09 TCMT-32.52
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-STFPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 TPMT-21.51
C06M-STFPR/L-2 0.375 6" 0.25 0.447 MS-1153 TPMT-21.51
C08-STFPR/L-2 0.5 5" 0.312 0.572 MS-1153 TPMT-21.51
C08M-STFPR/L-2 0.5 6" 0.312 0.572 MS-1153 TPMT-21.51
C08R-STFPR/L-2 0.5 8" 0.312 0.572 MS-1153 TPMT-21.51
C10-STFPR/L-2 0.625 7" 0.406 0.728 MS-1153 TPMT-21.51
C10S-STFPR/L-2 0.625 10" 0.406 0.728 MS-1153 TPMT-21.51
C12-STFPR/L-3 0.75 7" 0.5 0.885 MS-1155 TPMT-32.52
C12S-STFPR/L-3 0.75 10" 0.5 0.885 MS-1155 TPMT-32.52
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Carbide Boring Bars
available under 3/8”
*Coolant thru not
available
**Heavy Metal not
“C” for solid shank
For coolant thru add
“C” to the end of the
part number i.e.
CSWLOR 123C
“R” for right hand bar
“L” for left hand bar
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
CSWLOR 055* 0.187 4-1/2" 0.114 0.217 TS21 WCMT-1.21
CSWLOR 065 0.25 4-1/2" 0.156 0.291 TS2 WCMT-1.21
CSWLOR 066 0.312 4-1/2" 0.188 0.354 TS2 WCMT-1.51.5
CSWLO504R 0.312 4-1/2" 0.203 0.369 TS25 WCMT-21.51
CSWLOR 070 0.375 4-3/4" 0.218 0.416 TS25 WCMT-21.51
CSWLOR 062 0.375 4-3/4" 0.25 0.447 TS25 WCMT-21.51
CSWLOR 082 0.5 5" 0.312 0.572 TS25 WCMT-21.51
CSWLOR 102 0.625 7" 0.375 0.697 TS25 WCMT-21.51
CSWLOR 103 0.625 7" 0.375 0.697 TS4 WCMT-32.52
CSWLOR 123 0.75 7" 0.5 0.885 TS4 WCMT-32.52
“C” for solid shank
“E” for coolant thru
SWLO*Boring & Facing*Uses WCMT insert
carbide shank
SWLP*Boring & Facing*Uses WPMT insert
carbide shank
20Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C03-SWLPR/L-1.5* 0.187 4-1/2" 0.126 0.229 MS-1438 WPMT-1.51.21
C04-SWLPR/L-1.5 0.25 4-1/2" 0.156 0.291 MS-1438 WPMT-1.51.21
C05-SWLPR/L-1.5 0.312 4-1/2" 0.219 0.385 MS-1438 WPMT-1.51.21
C06-SWLPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 WPMT-21.51
C06M-SWLPR/L-2 0.375 6" 0.25 0.447 MS-1153 WPMT-21.51
C08-SWLPR-2 0.5 5" 0.312 0.572 MS-1153 WPMT-21.51
C08M-SWLPR-2 0.5 6" 0.312 0.572 MS-1153 WPMT-21.51
C08R-SWLPR-2 0.5 8" 0.312 0.572 MS-1153 WPMT-21.51
C10-SWLPR-3 0.625 7" 0.406 0.728 MS-1155 WPMT-32.52
C10S-SWLPR-3 0.625 10" 0.406 0.728 MS-1155 WPMT-32.52
C12-SWLPR-3 0.75 7" 0.5 0.885 MS-1155 WPMT-32.52
C12S-SWLPR-3 0.75 10" 0.5 0.885 MS-1155 WPMT-32.52
®
*Heavy metal shanks available, please call
for quote* 1-800-274-4686
Carbide Boring Bars
available under 3/8”
*Coolant thru not
available
**Heavy Metal not
SWLC*Boring & Facing*Uses WCMT insert
carbide shank
carbide shank
“R” for right hand bar
“L” for left hand bar“C” for solid shank
For coolant thru add
“C” to the end of the
part number i.e.
CSTJOR 123C
STJO*Boring & Facing*Uses TPGT insert
21Made In USA
“C” for solid shank
“E” for coolant thru
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C03-SWLCR-1.2* 0.187 4-1/2" 0.114 0.217 TS21 WCMT-1.21
C04-SWLCR-1.2 0.25 4-1/2" 0.156 0.291 TS2 WCMT-1.21
C05-SWLCR-1.5 0.312 4-1/2" 0.188 0.354 TS2 WCMT-1.51.5
C05M-SWLCR-1.5 0.312 6" 0.188 0.354 TS2 WCMT-1.51.5
C05-SWLCR-2 0.312 4-1/2" 0.203 0.369 TS25 WCMT-21.51
C05M-SWLCR-2 0.312 6" 0.203 0.369 TS25 WCMT-21.51
C06-SWLCR-2-218 0.375 4-3/4" 0.218 0.416 TS25 WCMT-21.51
C06M-SWLCR-2-218 0.375 6" 0.218 0.416 TS25 WCMT-21.51
C06-SWLCR-2 0.375 4-3/4" 0.25 0.447 TS25 WCMT-21.51
C06M-SWLCR-2 0.375 6" 0.25 0.447 TS25 WCMT-21.51
C08-SWLCR-2 0.5 5" 0.312 0.572 TS25 WCMT-21.51
C08M-SWLCR-2 0.5 6" 0.312 0.572 TS25 WCMT-21.51
C08R-SWLCR-2 0.5 8" 0.312 0.572 TS25 WCMT-21.51
C10-SWLCR-2 0.625 7" 0.375 0.697 TS25 WCMT-21.51
C10S-SWLCR-2 0.625 10" 0.375 0.697 TS25 WCMT-21.51
C10-SWLCR-3 0.625 7" 0.375 0.697 TS4 WCMT-32.52
C10S-SWLCR-3 0.625 10" 0.375 0.697 TS4 WCMT-32.52
C12-SWLCR-3 0.75 7" 0.5 0.885 TS4 WCMT-32.52
C12S-SWLCR-3 0.75 10" 0.5 0.885 TS4 WCMT-32.52
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
CSTJOR/L 062 0.375 4-3/4" 0.25 0.447 BHF0306R TPGP-220
CSTJOR/L 082 0.5 5" 0.312 0.572 BHF0308R TPGP-220
CSTJOR/L 102 0.625 7" 0.375 0.697 BHF0308R TPGP-220
CSTJOR/L 123 0.75 7" 0.5 0.885 BFTX0410A TPGP-330
®
*Heavy metal shanks available,
please call for quote* 1-800-274-4686
Carbide Boring Bars
carbide shank
“R” for right hand bar
“L” for left hand bar“C” for solid shank
“E” for coolant thru
carbide shank
“R” for right hand bar“L” for left hand bar “C” for solid shank
“E” for coolant thru
STUP*Boring & Facing*Uses TCMT insert
STUC*Boring & Facing*Uses TPMT insert
22Made In USA
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-STUPR/L-2 0.375 4-3/4" 0.25 0.447 MS-1153 TPMT-21.51
C06M-STUPR/L-2 0.375 6" 0.25 0.447 MS-1153 TPMT-21.51
C08-STUPR/L-2 0.5 5" 0.312 0.572 MS-1153 TPMT-21.51
C08M-STUPR/L-2 0.5 6" 0.312 0.572 MS-1153 TPMT-21.51
C08R-STUPR/L-2 0.5 8" 0.312 0.572 MS-1153 TPMT-21.51
C10-STUPR/L-2 0.625 7" 0.406 0.728 MS-1153 TPMT-21.51
C10S-STUPR/L-2 0.625 10" 0.406 0.728 MS-1153 TPMT-21.51
C12-STUPR/L-3 0.75 7" 0.5 0.885 MS-1155 TPMT-32.52
C12S-STUPR/L-3 0.75 10" 0.5 0.885 MS-1155 TPMT-32.52
C16-STUPR-3 1 7" 0.625 1.135 MS-1155 TPMT-32.52
C16T-STUPR-3 1 12" 0.625 1.135 MS-1155 TPMT-32.52
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-STUCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51
C06M-STUCR/L-2 0.375 6" 0.25 0.447 5513-020-03 TCMT-21.51
C08-STUCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51
C08M-STUCR/L-2 0.5 6" 0.312 0.572 5513-020-03 TCMT-21.51
C08R-STUCR/L-2 0.5 8" 0.312 0.572 5513-020-03 TCMT-21.51
C10-STUCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51
C10S-STUCR/L-2 0.625 10" 0.406 0.728 5513-020-03 TCMT-21.51
C10-STUCR/L-3 0.625 7" 0.406 0.728 5513-020-09 TCMT-32.52
C10S-STUCR/L-3 0.625 10" 0.406 0.728 5513-020-09 TCMT-32.52
C12-STUCR-2 0.75 7" 0.5 0.885 5513-020-03 TCMT-21.51
C12S-STUCR-2 0.75 10" 0.5 0.885 5513-020-03 TCMT-21.51
C12-STUCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52
C12S-STUCR/L-3 0.75 10" 0.5 0.885 5513-020-09 TCMT-32.52
C16-STUCR-3 1 7" 0.625 1.135 5513-020-09 TCMT-32.52
C16T-STUCR-3 1 12" 0.625 1.135 5513-020-09 TCMT-32.52
*Heavy metal shanks available, please call for quote*
1-800-274-4686
STUN*Boring & Facing*Uses TP insert
carbide shank
“R” for right hand bar“L” for left hand bar
“C” for solid shank“E” for coolant thru
carbide shank
“R” for right hand bar
“L” for left hand bar
“C” for solid shank
“E” for coolant thru
Carbide Boring Bars
CTFP*Boring & Facing*Uses TPG insert
23Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C06-STUNR/L-2 0.375 4-3/4" 0.25 0.447 S-930 T-221P
C06M-STUNR/L-2 0.375 6" 0.25 0.447 S-930 T-221P
C08-STUNR/L-2 0.5 5" 0.312 0.572 S-930 T-221P
C08M-STUNR/L-2 0.5 6" 0.312 0.572 S-930 T-221P
C08R-STUNR/L-2 0.5 8" 0.312 0.572 S-930 T-221P
C10-STUNR/L-2 0.625 7" 0.406 0.728 S-930 T-221P
C10S-STUNR/L-2 0.625 10" 0.406 0.728 S-930 T-221P
C12-STUNR/L-3 0.75 7" 0.5 0.885 S-944 T-321P
C12S-STUNR/L-3 0.75 10" 0.5 0.885 S-944 T-321P
C16-STUNR/L-3 1 7" 0.625 1.135 S-944 T-321P
C16T-STUNR/L-3 1 12" 0.625 1.135 S-944 T-321P
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert
C08-CTFPR/L-2 0.5 5" 0.312 0.572 CK-27 / STC-27 TPG-221
C08M-CTFPR/L-2 0.5 6" 0.312 0.572 CK-27 / STC-27 TPG-221
C08R-CTFPR/L-2 0.5 8" 0.312 0.572 CK-27 / STC-27 TPG-221
C10-CTFPR/L-2 0.625 7" 0.406 0.728 CK-19 / STC-9 TPG-221
C10S-CTFPR/L-2 0.625 10" 0.406 0.728 CK-19 / STC-9 TPG-221
C12-CTFPR/L-3 0.75 7" 0.5 0.885 CK-7 / STC-9 TPG-322
C12S-CTFPR/L-3 0.75 10" 0.5 0.885 CK-7 / STC-9 TPG-322
C16-CTFPR/L-3 1 7" 0.625 1.135 CK-20 / STC-11 TPG-322
C16T-CTFPR/L-3 1 12" 0.625 1.135 CK-20 / STC-11 TPG-322
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Carbide Boring Bars
carbide shank
“C” for solid shank
“E” for coolant thru
NKLC*PROFILE*Uses NPG insert
carbide shank
“C” for solid shank“E” for coolant thru
NELL*PROFILE*Uses NPG insert
24Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert
C08-NELL05 0.5 5" 0.375 0.67 CM-105 / S-518 NPGR-51R
C08M-NELL05 0.5 6" 0.375 0.67 CM-105 / S-518 NPGR-51R
C08R-NELL05 0.5 8" 0.375 0.67 CM-105 / S-518 NPGR-51R
C08-NELR05 0.5 5" 0.375 0.67 CM-106 / S-518 NPGR-51L
C08M-NELR05 0.5 6" 0.375 0.67 CM-106 / S-518 NPGR-51L
C08R-NELR05 0.5 8" 0.375 0.67 CM-106 / S-518 NPGR-51L
C10-NELL05 0.625 7" 0.5 0.87 CM-71 / S-524 NPGR-51R
C10S-NELL05 0.625 10" 0.5 0.87 CM-71 / S-524 NPGR-51R
C10-NELR05 0.625 7" 0.5 0.87 CM-79 / S-524 NPGR-51L
C10S-NELR05 0.625 10" 0.5 0.87 CM-79 / S-524 NPGR-51L
C12-NELL05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51R
C12S-NELL05 0.75 10" 0.562 1 CM-68 / S-524 NPGR-51R
C12-NELR05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51L
C12S-NELR05 0.75 10" 0.562 1 CM-68 / S-524 NPGR-51L
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Insert
C08-NKLCL05 0.5 5" 0.375 0.67 CM-105 / S-518 NPGR-51R
C08M-NKLCL05 0.5 6" 0.375 0.67 CM-105 / S-518 NPGR-51R
C08R-NKLCL05 0.5 8" 0.375 0.67 CM-105 / S-518 NPGR-51R
C08-NKLCR05 0.5 5" 0.375 0.67 CM-106 / S-518 NPGR-51L
C08M-NKLCR05 0.5 6" 0.375 0.67 CM-106 / S-518 NPGR-51L
C08R-NKLCR05 0.5 8" 0.375 0.67 CM-106 / S-518 NPGR-51L
C10-NKLCL05 0.625 7" 0.5 0.87 CM-71 / S-524 NPGR-51R
C10S-NKLCL05 0.625 10" 0.5 0.87 CM-71 / S-524 NPGR-51R
C10-NKLCR05 0.625 7" 0.5 0.87 CM-79 / S-524 NPGR-51L
C10S-NKLCR05 0.625 10" 0.5 0.87 CM-79 / S-524 NPGR-51L
C12-NKLCL05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51R
C12S-NKLCL05 0.75 10" 0.562 1 CM-68 / S-524 NPGR-51R
C12-NKLCR05 0.75 7" 0.562 1 CM-68 / S-524 NPGR-51L
C12S-NKLCR05 0.75 10" 0.562 1 CM-68 / S-524 NPGR-51L
*Heavy metal shanks available, please call for quote*
1-800-274-4686
carbide shank
LSERLaydown Thread
*Uses LT16 Insert
carbide shank
“C” for solid shank
“E” for coolant thru
NER*Thread & Groove*Uses NG insert
Carbide Thread Bars
“C” for solid shank
“E” for coolant thru
25Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
C08-LSER-3 0.5 5" 0.39 0.65 MS-1155 LT16
C08M-LSER-3 0.5 6" 0.39 0.65 MS-1155 LT16
C08R-LSER-3 0.5 8" 0.39 0.65 MS-1155 LT16
C10-LSER-3 0.625 7" 0.439 0.761 MS-1155 LT16
C10S-LSER-3 0.625 10" 0.439 0.761 MS-1155 LT16
C12-LSER-3 0.75 7" 0.51 0.895 MS-1155 LT16
C12S-LSER-3 0.75 10" 0.51 0.895 MS-1155 LT16
Catalog Number Shank Dia L F Min. Bore Clamp/Screw Insert
C08-NEL2 0.5 5" 0.44 0.697 CM-146 / SC-110 NG-2R
C08M-NEL2 0.5 6" 0.44 0.697 CM-146 / SC-110 NG-2R
C08R-NEL2 0.5 8" 0.44 0.697 CM-146 / SC-110 NG-2R
C08-NER2 0.5 5" 0.437 0.697 CM-147 / SC-110 NG-2L
C08M-NER2 0.5 6" 0.437 0.697 CM-147 / SC-110 NG-2L
C08R-NER2 0.5 8" 0.437 0.697 CM-147 / SC-110 NG-2L
C10-NEL2 0.625 7" 0.5 0.860 CM-74 / SC-110 NG-2R
C10S-NEL2 0.625 10" 0.5 0.860 CM-74 / SC-110 NG-2R
C10-NER2 0.625 7" 0.5 0.860 CM-75 / SC-110 NG-2L
C10S-NER2 0.625 10" 0.5 0.860 CM-75 / SC-110 NG-2L
C12-NEL2 0.75 7" 0.562 0.947 CM-74 / SC-110 NG-2R
C12S-NEL2 0.75 10" 0.562 0.947 CM-74 / SC-110 NG-2R
C12-NER2 0.75 7" 0.562 0.947 CM-75 / SC-110 NG-2L
C12S-NER2 0.75 10" 0.562 0.947 CM-75 / SC-110 NG-2L
*Heavy metal shanks available, please call for quote*
1-800-274-4686
steel shank
“R” for right hand bar
“L” for left hand bar
MCLN*Boring & Facing*Uses CNMG insert
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
MWLN*Boring & Facing*Uses WNMG insert
Steel Boring Bars
C at alo g N u m b e r Sh an k D ia. L F M in . Bo re C lam p / Scre w C am Scre w In se rt
S1 0 -M W LNR-3 0 .6 2 5 7 " 0 .4 4 0 .7 6 C K -5 /STC -5 NL-3 3 W NM G -3 2 2
S1 2 -M W LNR/L-3 0 .7 5 7 " 0 .5 0 0 .8 8 5 C K -6 /STC -5 NL-3 3 W NM G -3 2 2
S1 2 -M W LNR-3 3 0 .7 5 7 " 0 .5 0 0 .8 8 5 C K -6 /STC -5 NL-3 3 W NM G -3 3 2
S1 6 -M W LNR/L-3 1 7 " 0 .6 2 5 1 .1 3 5 C K -6 /STC -5 NL-3 3 W NM G -3 2 2
S1 6 -M W LNR-4 1 7 " 0 .6 2 5 1 .1 3 5 C K -2 0 /STC -1 1 NL-4 4 W NM G -4 3 2
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e C lam p / Scr e w C am Scr e w In se r t
S1 6 -M C LNR /L-4 1 7 " 0 .6 2 5 1 .1 3 5 C K -2 0 /STC -1 1 NL-4 4 C NM G -4 3 2
“S” for solid shank
“A” for coolant thru
steel shank
“R” for right hand bar
“L” for left hand bar
Catalog Number Shank Dia. L F Min. Bore Clamp/Screw Cam Screw Insert
S16-MTLNR-3 1 7" 0.625 1.135 CK-7 / STC-9 NL-33 CNMG-432
“S” for solid shank
“A” for coolant thru
MTLN*Boring & Facing*Uses CNMG insert
26Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Steel Boring Bars
“S” for solid shank
“A” for coolant thru
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
“R” for right hand bar
“L” for left hand bar
SCLP*Boring & Facing*Uses CPMT insert
SCLC*Boring & Facing*Uses CCMT insert
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S0 5 -SC LP R /L-1 .8 0 .3 1 2 4 -1 /2 " 0 .2 1 9 0 .3 8 5 M S-1 1 5 2 C P M T-1 .8 1 .5 1
S0 5 -SC LP R -2 0 .3 1 2 4 -1 /2 " M S-1 1 5 3 C P M T-2 1 .5 1
S0 6 -SC LP R /L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 M S-1 1 5 3 C P M T-2 1 .5 1
S0 8 -SC LP R /L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 M S-1 1 5 3 C P M T-2 1 .5 1
S0 8 -SC LP R /L-3 0 .5 5 " 0 .3 1 2 0 .5 7 2 M S-1 1 5 5 C P M T-3 2 .5 2
S1 0 -SC LP R /L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 M S-1 1 5 3 C P M T-2 1 .5 1
S1 0 -SC LP R /L-3 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 M S-1 1 5 5 C P M T-3 2 .5 2
S1 2 -SC LP R /L-3 0 .7 5 7 " 0 .5 0 .8 8 5 M S-1 1 5 5 C P M T-3 2 .5 2
steel shank
C at alo g N u m b e r Sh an k D ia. L F M in . Bo re In se rt Scre w In se rt
S0 5 -SC LC R/L-2 0 .3 1 2 4 -1 /2 " 0 .2 1 9 0 .3 8 5 5 5 1 3 -0 2 0 -0 3 C C M T-2 1 .5 1
S0 6 -SC LC R/L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 5 5 1 3 -0 2 0 -0 3 C C M T-2 1 .5 1
S0 8 -SC LC R/L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 5 5 1 3 -0 2 0 -0 3 C C M T-2 1 .5 1
S0 8 -SC LC R/L-3 0 .5 5 " 0 .3 1 2 0 .5 7 2 5 5 1 3 -0 2 0 -0 9 C C M T-3 2 .5 2
S1 0 -SC LC R/L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 5 5 1 3 -0 2 0 -0 3 C C M T-2 1 .5 1
S1 0 -SC LC R/L-3 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 5 5 1 3 -0 2 0 -0 9 C C M T-3 2 .5 2
S1 2 -SC LC R/L-3 0 .7 5 7 " 0 .5 0 .8 8 5 5 5 1 3 -0 2 0 -0 9 C C M T-3 2 .5 2
S1 6 -SC LC R/L-3 1 7 " 0 .6 2 5 1 .1 5 5 5 1 3 -0 2 0 -0 9 C C M T-3 2 .5 2
S1 6 -SC LC R/L-4 1 7 " 0 .6 2 5 1 .1 5 5 5 1 3 -0 2 0 -1 7 C C M T-4 3 2
27Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
steel shank
“R” for right hand bar
“L” for left hand bar
Steel Boring Bars
SDUP*Boring & Facing*Uses DPMT insert
SDUC*Boring & Facing*Uses DCMT insert
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S0 6 -SD U P R /L-2 0 .3 7 5 4 -3 /4 " 0 .3 7 5 0 .5 7 2 M S-1 1 5 3 D P M T-2 1 .5 1
S0 8 -SD U P R /L-2 0 .5 5 " 0 .4 3 7 0 .6 9 7 M S-1 1 5 3 D P M T-2 1 .5 1
S1 0 -SD U P R /L-2 0 .6 2 5 7 " 0 .5 0 .8 2 2 M S-1 1 5 3 D P M T-2 1 .5 1
S1 2 -SD U P R /L-3 0 .7 5 7 " 0 .5 6 2 0 .9 4 7 M S-1 1 5 5 D P M T-3 2 .5 2
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S0 6 -SD UC R /L-2 0 .3 7 5 4 -3 /4 " 0 .3 7 5 0 .5 7 2 5 5 1 3 -0 2 0 -0 3 D C M T-2 1 .5 1
S0 8 -SD UC R /L-2 0 .5 5 " 0 .4 3 7 0 .6 9 7 5 5 1 3 -0 2 0 -0 3 D C M T-2 1 .5 1
S1 0 -SD UC R /L-2 0 .6 2 5 7 " 0 .5 0 .8 2 2 5 5 1 3 -0 2 0 -0 3 D C M T-2 1 .5 1
S1 2 -SD UC R /L-3 0 .7 5 7 " 0 .6 2 5 1 .0 1 5 5 1 3 -0 2 0 -0 9 D C M T-3 2 .5 2
“S” for solid shank
“A” for coolant thru
28Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
Steel Boring Bars
SWLO*Boring & Facing*Uses WCMT insert
steel shank
SWLP*Boring & Facing*Uses WPMT insert
available under 3/8”
*Coolant thru not
available
**Heavy Metal not
“S” for solid shank
For coolant thru add
“C” to the end of the
part number i.e.
S-SWLOR 123C
steel shank
C at alo g N u m b e r Sh an k D ia. L F M in . Bo re In se rt Scre w In se rt
S-SW LO R 0 7 0 0 .3 7 5 4 -3 /4 " 0 .2 1 8 0 .4 1 6 TS-2 5 W C M T 2 1 .5 1
S-SW LO R 0 6 2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 TS-2 5 W C M T 2 1 .5 1
S-SW LO R 0 8 2 0 .5 5 " 0 .3 1 2 0 .5 7 2 TS-2 5 W C M T 2 1 .5 1
S-SW LO R 1 0 2 0 .6 2 5 7 " 0 .3 7 5 0 .6 9 7 TS-2 5 W C M T 2 1 .5 1
S-SW LO R 1 0 3 0 .6 2 5 7 " 0 .3 7 5 0 .6 9 7 TS-4 W C M T 3 2 .5 2
S-SW LO R 1 2 3 0 .7 5 7 " 0 .5 0 .8 8 5 TS-4 W C M T 3 2 .5 2
C at alo g N u m b e r Sh an k D ia. L F M in . Bo re In se rt Scre w In se rt
S0 6 -SW LP R/L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 M S-1 1 5 3 W P M T-2 1 .5 1
S0 8 -SW LP R/L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 M S-1 1 5 3 W P M T-2 1 .5 1
S1 0 -SW LP R/L-3 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 M S-1 1 5 5 W P M T-3 2 .5 2
S1 2 -SW LP R/L-3 0 .7 5 7 " 0 .5 0 .8 8 5 M S-1 1 5 5 W P M T-3 2 .5 2
29Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Steel Boring Bars
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
STFC*Boring & Facing*Uses TCMT insert
STFP*Boring & Facing*Uses TPMT insert
steel shank
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S0 6 -STFC R /L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 5 5 1 3 -0 2 0 -0 3 TC M T-2 1 .5 1
S0 8 -STFC R /L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 5 5 1 3 -0 2 0 -0 3 TC M T-2 1 .5 1
S1 0 -STFC R /L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 5 5 1 3 -0 2 0 -0 3 TC M T-2 1 .5 1
S1 2 -STFC R /L-2 0 .7 5 7 " 0 .5 0 .8 8 5 5 5 1 3 -0 2 0 -0 3 TC M T-2 1 .5 1
S1 2 -STFC R /L-3 0 .7 5 7 " 0 .5 0 .8 8 5 5 5 1 3 -0 2 0 -0 9 TC M T-3 2 .5 2
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S0 6 -STFP R /L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 M S-1 1 5 3 TP M T-2 1 .5 1
S0 8 -STFP R /L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 M S-1 1 5 3 TP M T-2 1 .5 1
S1 0 -STFP R /L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 M S-1 1 5 3 TP M T-2 1 .5 1
S1 2 -STFP R /L-3 0 .7 5 7 " 0 .5 0 .8 8 5 M S-1 1 5 5 TP M T-3 2 .5 2
30Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Steel Boring Bars
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
“R” for right hand bar
“L” for left hand bar
STUP*Boring & Facing*Uses TCMT insert
STUC*Boring & Facing*Uses TPMT insert
steel shank
“S” for solid shank
“A” for coolant thru
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S 0 6 -S TU P R /L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 M S -1 1 5 3 TP M T-2 1 .5 1
S 0 8 -S TU P R /L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 M S -1 1 5 3 TP M T-2 1 .5 1
S 1 0 -S TU P R /L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 M S -1 1 5 3 TP M T-2 1 .5 1
S 1 2 -S TU P R /L-3 0 .7 5 7 " 0 .5 0 .8 8 5 M S -1 1 5 5 TP M T-3 2 .5 2
S 1 6 -S TU P R -3 1 7 " 0 .6 2 5 1 .1 3 5 M S -1 1 5 5 TP M T-3 2 .5 2
31Made In USA
®
Catalog Number Shank Dia. L F Min. Bore Insert Screw Insert
S06-STUCR/L-2 0.375 4-3/4" 0.25 0.447 5513-020-03 TCMT-21.51
S08-STUCR/L-2 0.5 5" 0.312 0.572 5513-020-03 TCMT-21.51
S10-STUCR/L-2 0.625 7" 0.406 0.728 5513-020-03 TCMT-21.51
S10-STUCR/L-3 0.625 7" 0.406 0.728 5513-020-09 TCMT-32.52
S12-STUCR/L-3 0.75 7" 0.5 0.885 5513-020-09 TCMT-32.52
S16-STUCR-3 1 7" 0.625 1.135 5513-020-09 TCMT-32.52
*Heavy metal shanks available, please call for quote*
1-800-274-4686
STUN*Boring & Facing*Uses TP insert
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
“A” for coolant thru
steel shank
“R” for right hand bar
“L” for left hand bar
Steel Boring Bars
CTFP*Boring & Facing*Uses TPG insert
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e In se r t Scr e w In se r t
S 0 6 -S TU N R /L-2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 S -9 3 0 T-2 2 1 P
S 0 8 -S TU N R /L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 S -9 3 0 T-2 2 1 P
S 1 0 -S TU N R /L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 S -9 3 0 T-2 2 1 P
S 1 2 -S TU N R /L-3 0 .7 5 7 " 0 .5 0 .8 8 5 S -9 4 4 T-3 2 1 P
S 1 6 -S TU N R /L-3 1 7 " 0 .6 2 5 1 .1 3 5 S -9 4 4 T-3 2 1 P
C at alo g N u m b e r Sh an k D ia. L F M in . B o r e C lam p / Scr e w In se r t
S 0 8 -C TF P R /L-2 0 .5 5 " 0 .3 1 2 0 .5 7 2 C K -2 7 / S TC -2 7 TP G -2 2 1
S 1 0 -C TF P R /L-2 0 .6 2 5 7 " 0 .4 0 6 0 .7 2 8 C K -1 9 / S TC -9 TP G -2 2 1
S 1 2 -C TF P R /L-3 0 .7 5 7 " 0 .5 0 .8 8 5 C K -7 / S TC -9 TP G -3 2 2
S 1 6 -C TF P R /L-3 1 7 " 0 .6 2 5 1 .1 3 5 C K -2 0 / S TC -1 1 TP G -3 2 2
“S” for solid shank
“A” for coolant thru
32Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
steel shank
“R” for right hand bar
“L” for left hand bar
“S” for solid shank
For coolant thru add
“C” to the end of the
part number i.e.
S-STJOR 123C
STJO*Boring & Facing*Uses TPGT insert
steel shank
“S” for solid shank
“A” for coolant thru
NER*Thread & Groove*Uses NG insert
Steel Boring Bars
C at alo g N u m b e r Sh an k D ia. L F M in . B o r e In se r t Scr e w In se r t
S -S TJO R /L 0 6 2 0 .3 7 5 4 -3 /4 " 0 .2 5 0 .4 4 7 B H F 0 3 0 6 R TP G P -2 2 0
S -S TJO R /L 0 8 2 0 .5 5 " 0 .3 1 2 0 .5 7 2 B H F 0 3 0 8 R TP G P -2 2 0
S -S TJO R /L 1 0 2 0 .6 2 5 7 " 0 .3 7 5 0 .6 9 7 B H F 0 3 0 8 R TP G P -2 2 0
S -S TJO R /L 1 2 3 0 .7 5 7 " 0 .5 0 .8 8 5 B F TX 0 4 1 0 A TP G P -3 3 0
C at alo g N u m b e r Sh an k D ia. L F M in . Bo r e C lam p / Scr e w In se r t
S0 8 -NEL2 0 .5 5 " 0 .4 3 7 0 .6 9 7 C M -1 4 6 / SC -1 1 0 NG -2 R
S1 0 -NEL2 0 .6 2 5 7 " 0 .5 0 .8 6 0 C M -7 4 / SC -1 1 0 NG -2 R
S1 2 -NEL2 0 .7 5 7 " 0 .5 6 2 0 .9 4 7 C M -7 4 / SC -1 1 0 NG -2 R
S0 8 -NER 2 0 .5 5 " 0 .4 3 7 0 .6 9 7 C M -1 4 7 / SC -1 1 0 NG -2 L
S1 0 -NER 2 0 .6 2 5 7 " 0 .5 0 .8 6 0 C M -7 5 / SC -1 1 0 NG -2 L
S1 2 -NER 2 0 .7 5 7 " 0 .5 6 2 0 .9 4 7 C M -7 5 / SC -1 1 0 NG -2 L
33Made In USA
®
*Heavy metal shanks available, please call for quote*
1-800-274-4686
Steel Boring Bars
steel shank
NKLC*PROFILE*Uses NPG insert
steel shank
“S” for solid shank
“A” for coolant thru
NELL*PROFILE*Uses NPG insert
“S” for solid shank
“A” for coolant thru
C at alo g N u m b e r Sh an k D ia. L F M in . Bo re C lam p / Scre w In se rt
S0 8 -NELL0 5 0 .5 5 " 0 .3 7 5 0 .6 7 C M -1 0 5 / S-5 1 8 NP G R-5 1 R
S1 0 -NELL0 5 0 .6 2 5 7 " 0 .5 0 .8 7 C M -7 1 / S-5 2 4 NP G R-5 1 R
S1 2 -NELL0 5 0 .7 5 7 " 0 .5 6 2 1 C M -6 8 / S-5 2 4 NP G R-5 1 R
S0 8 -NELR0 5 0 .5 5 " 0 .3 7 5 0 .6 7 C M -1 0 6 / S-5 1 8 NP G R-5 1 L
S1 0 -NELR0 5 0 .6 2 5 7 " 0 .5 0 .8 7 C M -7 9 / S-5 2 4 NP G R-5 1 L
S1 2 -NELR0 5 0 .7 5 7 " 0 .5 6 2 1 C M -6 8 / S-5 2 4 NP G R-5 1 L
C at alo g N u m b e r Sh an k D ia. L F M in . Bo re C lam p / Scre w In se rt
S0 8 -NK LC L0 5 0 .5 5 " 0 .3 7 5 0 .6 7 C M -1 0 5 / S-5 1 8 NP G R -5 1 R
S1 0 -NK LC L0 5 0 .6 2 5 7 " 0 .5 0 .8 7 C M -7 1 / S-5 2 4 NP G R -5 1 R
S1 2 -NK LC L0 5 0 .7 5 7 " 0 .5 6 2 1 C M -6 8 / S-5 2 4 NP G R -5 1 R
S0 8 -NK LC R 0 5 0 .5 5 " 0 .3 7 5 0 .6 7 C M -1 0 6 / S-5 1 8 NP G R -5 1 L
S1 0 -NK LC R 0 5 6 2 5 7 " 0 .5 0 .8 7 C M -7 9 / S-5 2 4 NP G R -5 1 L
S1 2 -NK LC R 0 5 0 .7 5 7 " 0 .5 6 2 1 C M -6 8 / S-5 2 4 NP G R -5 1 L
34Made In USA
®
Proud Members of the Following Associations:
NTM Proudly Certified with the following organizations:
080119-A