volume iii - engineering · pdf file · 2017-07-04an iso 9001 & 14001 company...
TRANSCRIPT
AN ISO 9001 & 14001 COMPANY
TENDER DOCUMENT
TENDER No: EPI/WRO/CON/762A/0131
FOR
Construction of Boundry Wall of Wholesale Market at Balughat, under Panposh RMC, Sundergarh, Odisha (2nd call)
VOLUME – III
PRICE BID
SI. No. DESCRIPTIONESTIMATED COST
(Rs.)
1 2 3 4 5
In figures In words In figures In words
1
CONSTRUCTOIN OF BOUNDARY WALL
OF WHOLE SALE MARKET AT BALUGHAT
UNDER PANPOSH RMC
15358502
2 APPLICABLE TAXES/GST
TOTAL AMOUNT
(In Figures)
(In Words)
6
Seal & Signature of EPIL Seal & Signature of Bidder
3
ENGINEERING PROJECTS (INDIA) LTD.
(A GOVERNMENT OF INDIA ENTERPRISE)
QUOTING SHEET FOR BIDDERS
NAME OF WORK: CONSTRUCTOIN OF BOUNDARY WALL OF WHOLE SALE MARKET AT BALUGHAT UNDER PANPOSH RMC (2nd Call)
TO BE QUOTED BY TENDERER
% (-) BELOW/ (+) ABOVE/AT PAR AMOUNT IN Rs. AFTER ADDING % (-) BELOW/ (+) ABOVE/AT PAR
1 2 3 4 5
1 CIVIL WORKS
SubTotal 14464695.00 578587.8 13886107.20
2 ELECTRICAL WORKS
SubTotal 1533745.00 61349.8 1472395.20
15998440.00 639937.6 15358502.40
DEDUCT SALE /
TURNOVER TAX
(4%)
TOTAL AMOUNT
EXCLUDING
TAXES
ABSTRACT ESTIMATE OF CONSTRUCTOIN OF BOUNDARY WALL OF WHOLE SALE
MARKET AT BALUGHAT UNDER PANPOSH RMC
PRICE SCHEDULE
Total
SI. No. DESCRIPTION
ESTIMATED
COST (Rs.)
CIVIL WORK Unit Qnty Rate Amount
Item of Work
EARTH WORK IN EXCAVATION
1 Earth work in excavation of foundation trenches
and column foundation and pits in all kinds of
soil within an initial lift of 1.5m including
dressing the sides and levelling the bed &
depositing the excavated materials away from
the site within an initial lead of 50m as per
direction of Engineer-in-charge including cost of
all labour, sundries, Tools & plants etc.
complete.
Foundation cum 1355.33 119.90 162504.00
SAND FILLING
2 Filling foundation trenches and plinth with sweet
river sand, well watered and compacted , top
surface dressed and leveled to proper
gradient in layers of 0.225 mtr including cost of
all materials, conveyance, all taxes and
royalties, loading and unloading, including cost
of all labour, T&P, sundries etc. complete as per
direction of the Engineer-in-charge.
Foundation cum 174.31 279.40 48702.00
3 BACK FILLING
Back filling available excavated earth
(excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20
cm in depth, consolidating each deposited
layer by ramming and watering, lead upto
50 m and lift upto 1.5m.
cum 684.36 65.90 45099.00
4 PLAIN CEMENT CONCRETE (1:4:8)
Providing and laying Plain cement concrete of
proportion (1:4:8) using 4cm size metal etc. in
foundation and floors using cement, 40mm.
Size crusher broken H.G.Metal and screened
and washed sharp river sand for mortar of
approved quality and from approved quarry
inclduign hoisting, lowering and laying concrete
to the required level, ramming,watering and
curing etc. complete to required levels, laid in
layers not exceeding 15cm thick in each layer
including cost, conveyance, loading, unloading,
royalities and taxes of all materials, cost of all
labour,T&P required for the work including
shoring, shuttering and dewatering(if required)
including hire and running charges of water
pump required for the work etc. complete in all
respect as directed by the Engineer-in-charge.
Foundation cum 152.73 3696.10 564505.00
Sl No
CONSTRUCTION OF BOUNDARY WALL OF WHOLE SALE MARKET AT
BALUGHAT UNDER PANPOSH RMC
5 2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
granite crusher broken chips on new work in
Ground Floor
sqm 5.76 238.30 1373.00
REINFORCED CEMENT CONCRETE
6 Providing, lifting, hoisting and laying Reinforced
cement concrete of M-25 Grade to Footings,
retaining Wall and column. with 12mm to 20mm
size black hard crusher broken granite chips of
approved quality from approved quarry
including mixing and compacting to proper
shape and size, level and plumbs and finishing
the exposed surfaces smooth, scaffolding,
watering and curing for the required period
including cost of all materials with taxes,
royalties transportation, loading and unloading,
all labour, sundries, T&P including hire &
running charges of concrete mixer and vibrator
etc completed as per direction of the Engineer-
in-charge but excluding the cost of materials
and labour for reinforcement bars and centering
and shuttering for the work.
6.1 Column base footing cum 214.86 5579.80 1198876.00
6.2 Plinth beam cum 71.72 5916.30 424317.00
6.3 Column cum 208.46 9685.70 2019081.00
6.4 Beam cum 71.72 9685.70 694658.00
6.5 Slab cum 1.73 8926.00 15424.00
6.6 chaja cum 1.80 737.30 1327.00
7 Providing, fixing TOR Fe-500 reinforcement
bars for RCC work of required diameter of
approved quality with straightening, cutting,
bending, binding welding and joining (if
necessary) and tying the grills and placing in
position as required for R.C.C. work and
providing fan hooks, hoisting, lowering and
laying including cost, conveyance and taxes of
M.S. Rods or tor steel and binding wires of 18 to
20 gauge and labour required for the work for
bending, binding and tying the grills in all
heights as per the specification & direction of E-
I-C. (Linear measurements will be taken &
quantity will be calculated on standard weight.
Weight of binding wire will not be considered for
measurement.)
Qntl 696.28 5914.40 4118078.00
BRICK WORK IN SUPER STRUCTURE
8 Providin bricks masonry work using
(230mmx110x0cm size) having crushing
strength not less than 75Kg/Sqcm in cement
mortar (1:6) make the surface wet by water
before use with all necessary projections,
splays cutting, circular moulding, corbelling etc
as per drawings. including cost, conveyance, all
taxes, royalties, loading and unloading of all
materials, including cost of all labour,
scaffolding, watering and curing, sundries,
T&P etc. complete as per the direction of the
Engineer-in-charge.
8.1 Foundation cum 115.55 3839.60 443666.00
8.2 Superstructure - cum 461.27 3877.90 1788759.00
9 Providing 12mm thick cement plaster to the
inside surface of brick masonry wall with
cement mortar (1:6) including racking out joints,
scraping and cleaning the surface and finishing
the plaster surface smooth using wooden floats
only to proper plumbs and level and making
grooves, beads and drip coarse to give required
ornamental finish as per drawings including cost
of all materials, conveyance, loading and
unloading, all taxes and royalties, all labour,
scaffolding, watering and curing, sundries and
T&P etc. complete as per direction of the
Engineer-in-charge
sqm 2884.88 100.50 289930.00
10 Providing 16mm thick cement plaster to the
outside surface of brick masonry wall with
cement mortar (1:6) including racking out joints,
scraping and cleaning the surface and finishing
the plaster surface smooth using wooden floats
only to proper plumbs and level and making
grooves, beads and drip coarse to give required
ornamental finish as per drawings including cost
of all materials, conveyance, loading and
unloading, all taxes and royalties, all labour,
scaffolding, watering and curing, sundries and
T&P etc. complete as per direction of the
Engineer-in-charge
sqm 3238.13 140.60 455281.00
11 Providing 6mm thick cement plaster with
cement mortar of (1:4) to ceilings of roof slabs,
stairs, landings, chajja, shelves, columns,
beams and lofts etc. including roughening,
scraping and cleaning and finishing the
plastered surface smooth using wooden floats
only to proper plumbs and level, making
grooves, beads and drip coarse to give required
ornamental finish as per drawings including cost
of all materials, conveyance, loading and
unloading, all taxes and royalties, all labour,
scaffolding, watering and curing , sundries and
T&P etc. complete as per direction of the
Engineer-in-charge
sqm 12.96 111.20 1441.00
12 Painting two coats with Water soluble weather
coat paints of approved shade to the outside
walls ( ASIAN PAINTS or BERGER) over a
coat of cement wash & primer by means of
rollers to outside surface of new walls with a
approved quality exterior grade putty after
scraping, cleaning the surface including all cost
of materials, scaffolding, labour, watering &
curing T&P etc complete as per direction of E-I-
C.
sqm 6272.76 102.80 644840.00
13 Providing & Painting two coats with Plastic
emulsion paint of approved shade (ASIAN
PAINTS, BERGER, ) over a coat of primer
(including cost of priming )by means of roller to
inside surface of new walls including
preparation of base with a approved quality
acrylic based putty and finishing the surface,
smooth including all cost of materials, labour,
scaffolding, T&P etc. complete as per the
direction of E-I-C
sqm 107.39 110.60 11877.00
14 Providing & Painting two coats with Water
soluble weather coat paints of approved shade
to the outside walls ( ASIAN PAINTS or
BERGER) over a coat of primer(including cost
of primer) by means of rollers to outside surface
of new walls with a approved quality exterior
grade putty after scraping, cleaning the surface
including all cost of materials, scaffolding,
labour, watering & curing T&P etc complete as
per direction of E-I-C.
sqm 6254.54 102.40 640465.00
15 Finishing surface of walls with cement based
wall putty (water based) of approved make and
finished smooth and even surface to receive
painting including cost of scaffolding staging
charges with cost of all materials labour T & P
etc. as per direction of Engineer -In -charge.
sqm 6352.58 74.30 471997.00
16 Painting two coats with approved Enamel Paint
on Steel surface over a coat of Red Oxide
Primer including preparation of base with a
approved quality & finishing the surface, smooth
including all cost of materials, labour,
scaffolding, T&P etc. complete as per the
direction of E-I-C.
sqm 59.76 132.50 7918.00
17 Supplying Fitting, fixing up fully glazed
aluminium framed window (sliding type) made
up aluminium section 9778 as window frame,
section 4095, 4096 and 9777, 3994 as shutter
frame with 5mm black glass as panel fitted with
rubber beading including locking arrangement
including all fitting including cost of all materials,
all taxes, labour, T&P excluding cost of glass
etc. complete as per direction of the Engineer-in-
charge
sqm 3.60 2761.80 9942.00
18 Providing, fitting and fixing of Al door with
anodized Al. door section of 9202 as vertical
member, 9201 as top and 9200 as middle and
bottom member with frame section No.9221 and
tapered clip no. 4660 and the frame to be
completed by means of jointing angle no. 1855
including all cost of labour, T&P, hire charges of
drilling machine, labour charges , etc. complete
as per direction of the Engineer-in-charge
sqm 5.75 5678.10 32655.00
19 Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
materials, priming, and labour for fitting fixing
etc.complete as per the instruction of Engineer-
in-Charge
kg 1494.00 67.70 101144.00
20 providing 2.5cm artificial stone flooring with
cement concrete (1:2:4) including punning using
12mm size hand broken granites chips.
sqm 9.72 235.07 2285.00
21 providing Plain cement concrete (1:2:4)
nominal mix in foundation as per Technical
Specification
cum 6.48 5537.60 35884.00
22 Providing fitting fixing 3 ply Barbed wire fencing
with support of 50mmx50mmx5mm size angle
iron of 450 mm high at an interval of 1000 mm
on the top of the boundary wall etc complete.
Rm 1130 205.90 232667.00
14464695.00Total
Sl. Description Qnty Unit Rate Amount
INTERNAL-:
1 Recessed Wiring to light/Fan/Exhaust
Fan point in 5/8" or 3/4"dia. Good
quality PVC pipe with 1.5 sq.mm PVC
insulated Cu.wire (2 run) & 1.0 sq.mm
PVC insulated Cu.wire (1 run) for
running earth complete with 1 no
.6Amp.1way plate type Modular switch,
(Polycarbonate) and G.I box of
adequate size including PVC bend,
saddle, elbow, etc and other necessary
materials & labour complete as per the
direction of Engineer-in-Charge.
Group -A controlled by 6A 1-Way
Switch.12 point 554.83 6657.96
2Supply and fixing of 6A modular switch
& socket outlet complete with 1 no of
240 volt 6 amp 5 pin universal round/flat
pin combined shuttered socket outlet &
1 no. of 240 volt 6 amp control switch
mounted on modular grid plate, all
housed in a 3 module recessed zinc
chromate passivated flush metal box
including mosaic white cover plate of
approved make with all other
accessories etc. as required complete
as per the direction of Engineer-in-
Charge.9 No. 496.18 4465.62
3 Supply and fixing of Telephone point
completely providing 1 no.of telephone
socket & Top, Metal plate made of
polycarbonate moulded case metal box
with metal plate of adequate size
including PVC bend, saddle, elbow etc
and other necessary materials & labour
complete as per the direction of
Engineer-in-Charge.complete as per the
direction of Engineer-in-Charge.
3 Point 343.53 1030.59
ABSTRACT OF ESTIMATE FOR INTERNAL & EXTERNAL ELECTICAL WORK & PATHWAY LIGHTS
FOR THE PROPOSED MARKET AT WHOLESALE BALUGHAT UNDER PANPOSH RMC
4 Circuit or Sub-main wiring in
20/25/32mm dia. good quality ISI mark
PVC Conduit with following sizes PVC
insulated un-sheathed Single Core
FRLS Cu. conductor wire with proper
size of copper socket for termination of
approved make with all other required
materials & labour complete as per the
direction of Engineer-in-Charge.
a) (2 x 1.5 + 1 x 1.5) sq.mm copper wire
for 6A Light plug Point,wall fan. 100 mtr 103.65 10365.00
b) 0.5mm 2 pair telephone wire 100 mtr 38.51 3,851.00
5 Supply, Installation, Testing, and
commissioning of decorative ceiling fan
1200 mm sweep 230/250 volts, 50HZ
complete with suitable, clamp, downrod
(as per site requirement), blades,
canpoy, rubber, shackle, and
connections with 1.5 sq.mm PVC
insulated copper conductor cable etc as
required. 3 No. 2161.00 6483.00
6 Supply and fixing of capacitor switching
circuit,works at 120 to 280 volts,Heavy
duty, Noiseless 100W step type Fan
regulator complete with all other
necessary materials & labour.
3 No. 663.00 1989.00
7 Supply, Installation,Testing &
commissioning of Surface mounting 1 x
18W LED tube light fitting including
luminairs of approved make complete
with all materials & labou
3 No. 1605.00 4,815.00
8 Supplying & Fixing of angle / Batten
Holder fitting complete with 1 no of 10
watt LED Lamp(White) of approved
make complete with all other necessary
fixing materials including termination &
labour. 6 No. 552.00 3,312.00
Total = 42969.17
EXTERNAL-:
1 Supply & fixing of Hansel/Equiv. Make
Lawn Mower point complete
Polycarbonate body & 1no. 16A MCB &
Socket including all other materials &
lanour. 3 No. 3500.00 10500.00
2 Supply , Installation, testing &
commisioning of the following Indoor
floor mounted free standing type L.T
Distribution panel board of 415V , 50Hz.
Power supply made out of 2mm thick
for outdoor & 1.6mm thick for indoor
CRCA steel duly derusted & painted
with two coats of light grey & enamel
paint of approved shade over a coat of
primer, dust, damp & vermin proof,IP-
65, cubcle fixed on M.S angle channel
base, having hinged door and
compartmental arrangement for each
equipment and suitable size of
Aluminium busbar duly sleeved by
colour coded sleeves with required
ratings / sqinch appropriate current
density in the panel running vertically,
having provision for cable entry at
bottom, providing Earthing point to
terminate 25mm x 3mm G.I flat,
Nomenclature plate, Enamelled danger
board, earthing studs as per
specification mentioned below duly
factory wired confirming to the relevant
ISS.
MDB Light . 1 set 35860.00 35860.00
a) 32A, FP MCB , 10kA, - 1 no I/C.
b) 25A, FP MCB , 10kA, (L&T or SS
make) - 5 no O/G.
c) 16 A, DP MCCB, 10 kA( L&T or SS
make) - 3 nos O/G
d) 4 stripAl. Bus bar suitable for 50A
with heat shrinkable tube
e) 3-ph time switch for time operation
(Auto/Manual)
h) RYB LED indicating lamp
i) 32A 4 pole Stud type connector -
6nos
i) 32A 4 pole Rotary C/O Switch - 1nos
SDB Light .
3-a
Supply & fixing of 3 ph. 4 way, triple
pole and Neutral, sheet steel MCB
double door distribution box complete
with tinned copper busbar, neutral link,
earth bar, din rail, detachable gland
plate includingcommissioning including
all other materials etc. as required. - as
per SLD.3 No. 2575.00 7725.00
bSupply and fixing of FP 6 amp to 32
amp rating 440 V "C" series miniature
circuit breaker suitable for
inductive loads in the existing MCB DB
ISI marked complete with connections
testing and commissioning etc. as
required.
3 No. 1207.00 3621.00
c Supply and fixing of 5 amp to 32 amp
rating 240 V "B" series miniature circuit
breaker suitable for lighting and other
loads of the following poles in the
existing MCB DB ISI marked complete
with connections testing and
commissioning etc. as required.
SINGLE POLE 27 No. 138.30 3734.10
3 Supply, Installation, Testing, and
commissioning of 3-Ph Energy Meter as
per the specification & approved by
OSCB with Tamper Proof,Lockable Box
including testing & Commisoning with
OSEB all other aceooories as per
required. 1 job 7500.00 7500.00
4 Earthing with G.I earth pipe 3 meter
long 40 mm dia ISI marked including
accessories and providing
masonary enclosure with cover plate
having locking arrangment and watering
pipe etc with charcoal
and salt as required 8 No. 2,537.00 20,296.00
5 Providing and laying 6 SWG G.I. wire
on surface or in recess for loop earthing
along with existing
cable as required. 80 mtr 22.00 1760.00
6 Supply & Laying of one number PVC
insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of
following size direct in ground including
excavation, sand cushioning, protective
covering and refilling the trench etc as
required.
a 3 core 6 sq.mm(External Lights) 1450 mtr 228.00 330600.00
b 4 core 10 sq.mm(From MDB Light to
S.DB Light) 500 mtr 281.00 140500.00
c 4 core 16 sq.mm(From existing supply
to MDB Light) 150 mtr 317.00 47550.00
7 Supplying and making cable route
marker with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size )
of size 60 cm X 60 cm at the bottom
and 50 cm X 50 cm at the top with a
thickness of 10cm including inscription
duly engraved as required. 40 nos 283.00 11320.00
8 Supplying and making end termination
with brass compression gland and
aluminium lugs/copper for following size
of PVC insulated and PVC sheathed /
XLPE aluminium/copper conductor
cable of 1.1 KV grade as required.
a 3 core 6 sq.mm 240 nos 100.00 24000.00
b 4 core 10 sq.mm 6 nos 146.00 876.00
c 4 core 16 sq.mm 2 nos 165.00 330.00
9 Providing, laying and fixing following dia
G.I. pipe (medium class) in ground
complete with G.I. fittings including
trenching (75 cm deep)and re-filling etc
as required.(for Road crossing)
a) 50 mm dia 20 mtr 450.00 9000.00
Sub Total = 655172.10
PATH WAY LIGHTING
1 Supplying and Fixing steel tubular
swan neck swaged pole of following
specification and as per IS: 2713 ( Part
– I, III ) : 1980 and of tested quality of
steels of minimum tensile strength 540
MPa suitable for fixing the street light i/c
transportation, painting with minimum 2
coat of silver oxide paint, earthing the
body testing, commissiong etc as reqd.
Poles shall be well-finished, clean and
free from harmful surface defects. Ends
of the polesshall be cut square. Poles
shall be straight, smooth and culindrical.
The weld joints, if any,shall be of good
quality, free from scale, surface defects,
cracks, etc.
Note : No circumferential joints shall be
permitted in the individual tube lengths
of the poles. If welded tubes are used
they shall have one longitudinal weld
seam only : and the longitudinal welds
shall be staggered at each swaged
joint.
a Errection of 10'(3MTR) Pole with swan
neck design with 300mmBase Plate
,Nut & Bolts, inbuilt Loop in loop out Box
with MCB Protectioon ,earth Terminals
and including all other material &
Labour as required. 40 nos 13110.00 524400.00
2 Supply, Testing & commissioning of IP-
66 LED Patway Luminaire including 1
no. of 35 watt LED luminairs of
approved make complete with all
materials & labour
6 each 17854.00 107124.00
3 Supply, Testing & commissioning of
presure die cast LED street Light
including 1 no. of 25 watt LED
luminairs of approved make complete
with all materials & labour..
40 each 3567.00 142680.00
4 Construction of M20 grade RCC
foundation of suitable size by using Fe-
500 grade steel,cable entry and all
other desired materials and fixing the
foundation bolts & erection of pole on
the foundationas per the approved
drawing obtained from structural
calculation by considering SBC as 10
Tonne/Sqm including Erection of pole
on the foundation & fixing the luminaire
on the Pole/bracket as per the direction
of EIC.40 nos 1535.00 61400.00
Sub Total = 835604.00
G. Total = 1533745.00