- an ingenious HSE-system! - an ingenious HSE-system!

1/2

2C002176

2Y008292

– a unique safety system for better profi tability! – a guaranteed profi table investment! SafetyMark – a universal standard for all types of machinery and equipment!

Always correct function!

2Y005604

Copyright ©

20

14

Maskin &

Sikkerhet A

S

Electronic management system for safety locking of quick couplers- management of hydraulic valves for locking the quick couplers for all types of vehicles- coordinating / same operation regardless of machine type and manufacturer- sensor controlled warning of locking and position of individual locking devices- up to 4 QC-quick couplers on the same machine

Self-explanatory labeling systems for hydraulics, etc.- standardized colors and symbols feature simplifi es the use and training- common solution regardless of manufacturer, machine type and drivers- decals for marking features / control and auxiliary circuits- heat shrink tubes for labeling tubes / pipes, etc.

Our brands:

Maskin & Sikkerhet AS develops and produce uniquesolutions for safer and easier use of machinery and equipment.

Distributor:

Producer:Maskin & Sikkerhet AS

Tel: + 47 970 52 400 – E - mail: post@maskinsikkerhet.no

Go to our website for further information:

www.maskinsikkerhet.no

• Always the same identity on Machine and Equipment!

1 81/2

Standard Joystick (right) ID levers / switches ID No.1 to No. 8

External valves are divided into groups: A - B - C• Joystick Standard No.1 and 2 ensures uniform operation.

• Same valve can be used for alternative outlets.

F – Float position T - line open – free return /drainage to fi lter / tank

B – Minus / lowering – always blue ID B - port (not to be used for lifting function)

N – Neutral – locked positionNB! Always follow the safety instructions

A – Plus / lift – always red ID A - port (closing / locking - transport position)

For proper labeling - Always follow the system descriptions!

12B002001

12R002001

The same identity on outlet and hoses:

- an ingenious HSE-system! - an ingenious HSE-system!

High quality products for safe and permanent marking:Identifi cations stickers and ID-markers laminated for optimal protection.

• Standardized decal sets and connecting plans.

Heat shrinkable tubes, made of UV resistant material for durable marking of hoses, pipes, etc.• Flexible and durable material available in two dimensions, that cover hose and pipe sizes from OD 15 to 45 mm.

SafetyMark - the only system with the same identity on machine and equipment – an important HSE measure to prevent damage and breakdown!

SafetyMark simplifi es work for everyone operating and repairing machines with additional hydraulics:• Reduces shutdown time for connecting equipment when using more than 1 hydraulic hose.• Reduces the oil spill and pollution of hydraulic oil and an environment friendly solution.

A self-explanatory system regardless of machine type, manufacturer, and language

Have you ever experienced that the equipment moves in the opposite direction intended? Have you ever connected and result back pressure when you have more than 2 hoses? Do you use more than 2 minutes to connect 8 pcs hoses correctly?

If the answer is YES, on one or more of the above - use the SafetyMark system!

Equipment with 8 HosesHeat shrinkable tubes in two dimensions Minikit for easy startup and marking of pair of hoses

Connection plan with function symbols Supplementary ID-markers Agri interiors with Joystick No. 1/ 2Standard connection plan w/Joystick ID

System case and blisterpack

- markers attached

Standardized labeling of T. Stangeland Maskin AS

Universal ID - markers in pairs separable Details

System case and blisterpack

Startset - markers Snow BlowersShrink tubes

2C008253

Art./Part No2C002178Copyright 2014 Maskin & Sikkerhet AS

2R002005

2B002005

2R002006

2B002006

2R002007

2B002007

2R002008

2B002008

5 6 7 8

5 6 7 8

2C002178

2C002178

2C002106

1 2 3 4

1 2 3 4

2C002176

Art./Part No2C002014Copyright 2012 Maskin & Sikkerhet AS

15 6 87 4/5

2/342 3

3/41/2

1 2 3 4

1 2 3 4

2C002104

2C002104

2Y000013

3/4

1/2

1 3/4

1/2

13/4

1/2

13/4

1/2

1

Copyright 2014 Maskin & Sikkerhet AS

Art./Part No2Y008292

2Y008292

2Y008251

Plus – primary pressure(Drive motor, cylinder etc.)

AddressMinus – secondary pressure(Reversing motor etc.)

Floating position(T-line open)

Free return(drainage)