1 digital i&c systems configuration management presented by: david e woods senior engineer –...
TRANSCRIPT
1
Digital I&C Systems Configuration Management
Presented By:
David E WoodsSenior Engineer – Electrical/I&C Design Engineering
June 21, 2011
2
Digital I&C Systems Configuration Management
Gaps Digital I&C Systems Standards, Guides and
Regulatory Requirements EPRI Digital I&C CM Guidelines
3
Gaps
The proliferation of diverse digital I&C equipment for plant upgrades and equipment replacements has challenged station personnel to develop and implement effective configuration management methods.
4
Gaps
High level requirements and guidance provided by industry standards are not being effectively translated into practical methods to manage the configuration of digital I&C equipment.
7
Digital I&C Systems
Hardware & Software Tightly Integrated
Digital systems hardware and software are much more tightly integrated and far more pervasive throughout plant systems. Therefore, the traditional approach to handling software design (and configuration management) in digital systems is not always adequate.
The hardware and software components of a digital system cannot be adequately controlled separately from each other.
The integration of the hardware and software is paramount to achieving a high quality system and adequate system integrity.
8
Digital I&C Systems
Digital Systems Configuration Items
• more than just software
• they include – hardware items – configuration data items– document and media items– setpoints, tuneable parameters, end user
parameters
9
Digital I&C Systems
Digital System Layer
Digital System Layer
Interface LayerHardware Layer
Software Layer
Platform Layer
Interface LayerHardware Layer
Software Layer
Application Layer
Digital System Layer
I&C Layer
Mechanical Layer
Electrical Layer
Plant System
© 2002 ProDesCon - Used with permission
10
Standards, Guides andRegulatory Requirements
CM is governed by an elaborate array of industry committees, regulatory bodies, and benchmarking activities.
11
EPRI Digital I&C CM Guideline
EPRI Guideline on Configuration Management for Digital Instrumentation
& Control Equipment and Systems
1022991
Project Manager: Ray Torok - [email protected]
Program Manager: Robert Austin - [email protected]
12
EPRI Digital I&C CM Guideline
Provides focused guidance for implementing configuration management for digital I&C equipment and systems. It addresses both software and hardware issues.
Best practices and effective methods are identified and developed into practical guidance for utility engineers and their contractors.
13
EPRI Digital I&C CM Guideline
Identifies the requirements, explain the issues and options, and provides examples of effective methods and good practices, including detailed guidance that can be used by utility engineers in developing procedures.
Addresses the finer points of digital CM, including methods for identifying hardware and software configuration items, controlling application logic, controlling configuration data, and optimizing and controlling documentation.
14
EPRI Digital I&C CM Guideline
Differentiates methods for user-controlled data, tunable parameters, Technical Specification (T/S) set points and other data sets.
Complements existing methods for design control, document control, parts control, and other Appendix B program criteria.
15
Basic principles underlying Digital Configuration Management
Digital CM is not a program separate from other safety or management programs and serves as an integrating activity rather than a stand-alone functional or operational program.
Digital CM must, therefore, be integrated with existing plant programs and policies.
17
Digital I&C CM Guidelines - Topics
Definition of the critical elements of digital systems configuration management
Digital systems configuration management processes that address the unique and integrated nature of digital system hardware and software
Documentation methods that address the needs of various users (e.g., design & system engineers, vendors, operations and maintenance personnel)
18
Digital I&C CM Guidelines - Topics
Change control methods that are rigorous, but flexible enough to address various kinds of changes such as:
– Design & Equivalent Engineering Changes– Set points – Minor Changes below the threshold of an Engineering
Change – Field Configurable Parameters – Field Tuning – Calibration Settings – Maintenance Changes – Problem/Error Correction
19
Digital I&C CM Guidelines - Topics
Methods to achieve integration with the overall Plant Configuration Management Processes
Sample/Guide Procedures that incorporate effective, best practice methods
20
Digital Configuration Management Methods and Procedures
Identifying Configuration Items Configuration Control Configuration Status Accounting Configuration Audits, Internal Reviews and Self
Assessments Interface Control Contractor/Vendor Control
21
Identifying Configuration Items
• Identifying Software Configuration Items (CI) • Identifying Data Configuration Items • Identifying Backup and Disaster Recovery
Libraries • Identifying Engineering Tool Configuration Items • Identifying Document Configuration Items • Relationship Between Digital CIs and Existing
Plant CM Programs • Configuration Items that May Require Digital
Configuration Controls
22
Configuration Control• Establishing Baselines • Changes to Configuration Items • Change Initiation • Changes Under the Engineering Change
Process • Other Changes • Software Configuration Management Plans
(SCMP) • Media Control • Graded approach
23
Configuration Status Accounting
• Software Configuration Item Releases and Versions
• Software Configuration Item Libraries• System Images • Backup and Restoration
• Configuration Status Accounting Metrics
24
Configuration Audits, Internal Reviews and Self Assessments
• Configuration Audits
• Configuration Reviews
• Self Assessments
25
Interface Control
• Interface with Plant Design Basis Requirements
• Interfaces Between Software Configuration Items
• System Data Interfaces• System Boundaries
26
Contractor/Vendor Control
• Contractor Activities and Products
• Vendor Products
• Lifeycle Interfaces
27
EPRI Digital I&C CM Guideline
Planned to be published by the end of 2011
EPRI Guideline on Configuration Management for Digital Instrumentation
& Control Equipment and Systems
1022991
Project Manager: Ray Torok - [email protected] Program Manager: Robert Austin - [email protected]