a study on functional areas 0f vengateshwara
TRANSCRIPT
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
1/43
1
A STUDY ON FUNCTIONAL
AREAS OF VENGATESHWARA
ENGINEERING IN HOSUR
INPLANT TRAINING REPORT
Submitted By
SARADHI.D
AC10MBF078
in partial fulfillment for the award of the degree
Of
MASTER OF BUSINESS ADMINISTRATION
Under the Guidance of
Mr.VIJAYSANKAR, MBA,(Phd).
DEPARTMENT OF MANAGEMENT STUDIES
ADHIYAMAAN COLLEGE OF ENGINEERING(An Autonomous Institution, Affiliated to Anna University of Technology, Coimbatore)
Dr. MGR Nagar, Hosur635109
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
2/43
2
JULY 2011
CERTIFICATE
This is to certify that Implant training report entitled A STUDY ON FUNCTIONAL AREAS
OF VENGATESHWARA ENGINEERING submitted by D.SARATHY (AC10MBF078) is the
Bonafide work of the industrial training done by her/him during the academic year 2010-2012,
under my guidance and supervision in partial fulfillment for the award of DEGREE OF
MASTER OF BUSINESS ADMINISTRATION.
Place: Hosur
Date:
Mr.VIJAYSANKAR Dr.V.NAVANEETHA KUMAR
(Faculty Guide) ( Director)
Department of Management studies
Submitted for the Implant training Viva-Voce examination held on ---------------
Internal Examiner External Examiner
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
3/43
3
DECLARATION
I hereby declare that this Implant training report on entitled A STUDY ON
FUNCTIONAL AREAS OF TITAN[PRECISION ENGINEERING DIVISION] submitted
to Department OfManagement Studies, ADHIYAMAAN COLLEGE OF ENGINEERING,
HOSUR in partial fulfillment of the requirement for the award OF THE DEGREE OF
MASTER OF BUSINESS ADMINISTRATION is a original work done by me during the
period of my study at the college under the supervision and guidance ofMr.VIJAYSANKAR
MBA (Phd), Lecturer, Department Of Management Studies, Adhiyamaan College ofEngineering, Hosur
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
4/43
4
ACKNOWLEDGEMENT
I take this opportunity to thank all those who helped me in completing this work
successfully. First of all, I thank the Almighty for his blessings to me. Express my sincere thanks
and sense of gratitude to my respected principal Dr. G.RANGANATHAN Principal ofAdhiyamaan Engineering College, Hosur for having granted permission to do this summer
project.
My most thanks to my respected Director Dr. V NAVANEETHA KUMAR, Department
Of Management Studies, AERI for his continuous guidance to us. I also thank
Mr.VIJAYSANKAR.MBA, (Phd)., department of management who has been with me in
submitting this report.
I also wish to express my heartful thanks to Mr. DEVARAJ, for providing me support to
know the functional areas of Vengateshwara Engineering Hosur., for his valuable guidance
during my implant training.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
5/43
5
Table of Contents
Chapter Contents Page no
I IntroductionObjectives of the Inplant TrainingScope of the Training
06
II ProfileCompany
Introduction to Other Companies Specimen of Introduction Letter Preliminary works
Industry
Indian Automobile Industry Automobile Dealer Network Major Manufacturers Key factors
Proprietor Profile
07-16
III Functional Areas
Production and Operations
Production process Products Raw materials ProductsFinance
Invoices Delivery challans JJ Forms Quotations Tax Invoice Calculation of VAT
Marketing
Out Sourcing Credits Transports
HR
17-38
IV Findings and SWOT analysis Suggestions
SWOT Analysis Suggestions 39-41
V Conclusion
Appendices
42-43
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
6/43
6
CHAPTER I
INTRODUCTION
1. OBJECTIVES OF INPLANT TRAINING
To gain the basic knowledge about the company To know the basic functions of the company To get practical knowledge about the functional areas To know about working environment
2. SCOPE OF INPLANT TRAINING
Getting experience
Attaining basic knowledge
Knowing about working environment Improving the skills Practical involvement
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
7/43
7
CHAPTER I I
COMPANY PROFILE
NAME :- Vengateshwara Engineering
PROPORIETOR :- Mr. Kumar
STARTED :- 11.07.2007
NATURE :- Fabrication works
LOCATION :- NO.24 Rajeshwari Layout, Sipcot, Hosur
TIN NO. :- 33473324217
CST NO. :- 1046018
TYPE :- Small Scale Industry
LOGO :- Letters VE Engraved Oval
The company taken by me is a small scale industry. The name of the company is
Vengateshwara Engineering it was situated at No. 24 Rajeshwarai Layout, Sipcot First phase
Hosur. The nature of the job carried by this
company is all kinds of fabrication and painting works . they are doing the work on contract
basis. The vendors of this company are given below.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
8/43
8
Milltec Industries Bangalore Pvt. Ltd.Bangalore.
Vectra Advanced Engineering Pvt. LtdBangalore.
VMR EnterprisesHosur.
Terex CotporationHosur. Tamil Nadu.
Areva T&D Pvt limitedHosur TamilNadu.
For the above mentioned companies they are producing the goods on piece rate basis apart from
the above this company is taking some of the field works too namely making Green Houses for
nursery. Most probably the are taking such kind of jobs during the months of October to January
because during this time the government is issuing large amount of funds with large subsidiaries
to the farmers to such kinds of job they are taking the amount in advance to their work.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
9/43
9
INTRO TO OTHER COMPANIES
At first the company is trying to get the orders from the vendors with the help of the
introduction letter. The important details to be furnished in the intro letter is listed below.
Address of the company Nature of job it is doing Facilities available in that company Man powers of the company Machinery list TIN Number E-mail id Phone (Land line , Fax, Mobile) Other litigation references
The above information is dully filled in the letter pad of the concern and the same will be
given to the Company which one is outsourcing the job. The outsourcing company which one is
satisfied with that will inspect the contracting companies and examine the capabilities of the
manpower machinery and other needed requirements to perform their job if they are satisfied
with all the above aspects the company will get ready to issue the orders.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
10/43
10
The specimen for the introduction letter is attached in the following pages of this
project . to get the order from large scale industries the company has to maintain some of the
basic litigations on that some of them are given below.
The company should be a registered one No Child labours ISI certificates Sufficient safety & welfare measures to employees ESI &Provident funds
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
11/43
11
SPECIMEN OF INTRODUCTION LETTER
TO:
Dear Sir,
We pleasure in introducing ourselves as one of the leading Fabricator in hosur
& Bangalore. We have successfully executed in supply & erection. We have past 15 years
experienced in Rear body fabrication for M\S Ashok Leyland, TATA ,Tatra & BEML,We have
fabricated both Tipper & Fixed body for M\S TATA & Ashok Leyland for various
models(2516,Stallion,Bison,TATRA Hemang & Sub frames for 2516 & Bison tipper).
We have the following Facility,
MIG Weld set(400 Amps) ESAB Make - 2 Nos MIG Weld set(250 Amps) ESAB Make - 3 Nos Arc Weld set - 1 No Pug Cutting M\C - 1 No Gas cutting set - 2 Nos Angle grinder M\C 7 - 2 Nos Angle Grinder M\C 5 - 1 Nos Abrasive cut off Machine - 1 Nos Lathe. - 1 Nos
We have the following Material Handling Facility
2 Ton Manual hoist Hand pallet truck
Can be hired the Mobile cranes as per the size of the job when ever required.
We request you to enter us in your mailing list send us your requirements to enable us to quote
for the same.
Thank you
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
12/43
12
PRELIMINARY WORK
The company which is ready to place orders for outsourcing will dispatch the
necessary materials to the vendor company in case for job work or else will give the necessary
drawings to the vendor to produce a single quantity for sample purpose the company has to
produce the same as per the requirements of the company and dispatch the same to the
outsourcing company for quality check the quality team of the company will check the quality if
the quality of the item is as per the satisfaction of the company the company will place the work
order to that concern .After receiving the same the company starts to produce the goods
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
13/43
13
INDUSTRY PROFILE
Automobile Industry, India Automobile Industry
Following India's growing openness, the arrival of new and existing models, easy availability offinance at relatively low rate of interest and price discounts offered by the dealers and
manufacturers all have stirred the demand for vehicles and a strong growth of the Indian
automobile industry.
The data obtained from ministry of commerce and industry, shows high growth obtained since
2001- 02 in automobile production continuing in the first three quarters of the 2004-05. Annual
growth was 16.0 per cent in April-December, 2004; the growth rate in 2003-04 was 15.1 per cent
The Automobile industry grew at a compound annual growth rate (CAGR) of 22 per centbetween 1992 and 1997.
With investment exceeding Rs. 50,000 crore, the turnover of the automobile industry exceeded
Rs. 59,518 crore in 2002-03. Including turnover of the auto-component sector, the automotive
industry's turnover, which was above Rs. 84,000 crore in 2002-03, is estimated to have exceeded
Rs.1,00,000 crore ( USD 22. 74 billion) in 2003-04.
Automobile Dealers Network in India
In terms of Car dealer networks and authorized service stations, Maruti leads the pack with
Dealer networks and workshops across the country. The other leading automobile manufactures
are also trying to cope up and are opening their service stations and dealer workshops in all the
metros and major cities of the country. Dealers offer varying kind of discount of finances who in
tern pass it on to the customers in the form of reduced interest rates.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
14/43
14
Major Manufacturers in Automobile Industry
Maruti Udyog Ltd. General Motors India Ford India Ltd. Eicher Motors Bajaj Auto Daewoo Motors India Hero Motors Hindustan Motors Hyundai Motor India Ltd. Royal Enfield Motors Telco TVS Motors DC Designs Swaraj Mazda Ltd
Government has liberalized the norms for foreign investment and import of technology and that
appears to have benefited the automobile sector. The production of total vehicles increasedfrom 4.2 million in 1998- 99 to 7.3 million in 2003-04. It is likely that the production of such
vehicles will exceed 10 million in the next couple of years.
The industry has adopted the global standards and this was manifested in the increasing exports
of the sector. After a temporary slump during 1998- 99 and 1999-00, such exports registered
robust growth rates of well over 50 per cent in 2002-03 and 2003-04 each to exceed two and- a-
half times the export figure for 2001-02.
Automobile Export Numbers
Category1998-991998-99Passenger Car25468121478Multi Utility
Vehicles26543892Commercial Vehicles1010819931Two Wheelers100002256765Three
Wheelers2113851535Percentage Growth-16.632.8
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
15/43
15
THE KEY FACTORS BEHIND THIS UPSWING
Sales incentives, introduction of new models as well as variants coupled with easy availability of
low cost finance with comfortable repayment options continued to drive demand and sales of
automobiles during the first two quarters of the current year. The risk of an increase in the
interest rates, the impact of delayed monsoons on rural demand, and increase in the costs of
inputs such as steel are the key concerns for the players in the industry.
As the players continue to introduce new models and variants, the competition may intensify
further. The ability of the players to contain costs and focus on exports will be critical for the
performance of their respective companies.
The auto component sector has also posted significant growth of 20 per cent in 2003-04, to
achieve a sales turnover of Rs.30,640 crore (US$ 6.7 billion). Further, there is a potential forhigher growth due to outsourcing activities by global automobiles giants. Today, this sector has
emerged as another sunrise sector.
EVEN GROWTH
Opposing the belief that the growth in automobile industry has catered only to the top income-
stratum of society, Growth of exports of 32.8 % in the first three quarters of 2004-05, the fastest
growth in volumes has come from commercial vehicles as against passenger cars.
Between 1998-99 and 2003-04, output of commercial vehicles has grown 2.8 times compared to
the 2.2 times increase in passenger cars. Furthermore, two-wheeler output continues to dominate
the volume statistics of the sector. In 2003-04, for every passenger car turned out by the sector,
there were 7 two-wheelers produced. In the two wheeler segment, there is a greater preference
for motorcycles followed by scooters, with both production and domestic sales of motorcycles
increasing at faster rates than for scooters in the current and previous years.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
16/43
16
PROPRIETOR PROFILE
Mr. Kumar is the proprietor of this company . he is born and brought up in
Tiruvannamalai district of Tamilnadu. He dont have the knowledge of studies. But he is soo
much eager to do fabrication works from his early age itself . At very first he worked in his
native and gained the knowledge about the mechanisms of engines.then he moved to Chennai to
work there he was worked for a period of two years there he gained the knowledge about dying
works then he came to hosur in 2001. At first he worked in Shardiow comoany it was situated in
Hosur near Tamilnadu check post. Yhen he joined in Prabha Engineers there he worked for a
period of three years there he was trained to build the bodies to Ashokleyland for the models
2216 . Then from there he moved to Vectra Advanced Engineering Pvt Ltd. There he worked for
two years there he came to know the knowledge about Tatra body, Catterpillare genset
container, BEML body building process.
Then atlast he started his first concern during the year 2008 the name of that
company is Everest Engineering it was just opp. To Ashok Leyland; the nature of th company is
also fabrication it did the job for Usha Telecast it was situated at dharga near to titan showroom
to that company they prepared hydraulic tanks for compressors then he started his second
concern in Rajeshwari layout.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
17/43
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
18/43
18
PRODUCTION
IMPORTANT PRODUCTION PROCESS
Welding Process:
In this company welding is the major process. Welding is a process of joining similar metals by
the application of heat, with or without application of pressure and addition of filler material.
Welding consists of fusing metals together while they are in the plastic or molten state. Gas
and Electric arc are used for the purpose of heat. Electrodes are used for filling in and
reinforcement. There are 8 welding processes as mentioned below:
Arc welding
Brazing
Flow welding
Forge welding
Gas welding
Induction welding
Resistance welding
Thermit welding
On the above this company is using only gas welding that too co2
MIG Weld set(400 Amps) ESAB Make MIG Weld set(250 Amps) ESAB Make Arc Weld set
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
19/43
19
Surface Treatment:
Some of the surface treatments done by this company to do complete their work Surface-treating
processes are chemical or mechanical in nature and alter the surface characteristics of the metal.
Enamelling: It is a process that bakes on a white, brittle protection finish. {out sourcing}
Galvanising: It is a hot-dip process which provides an anti-rust zinc coating. Zinc is used for
this purpose. This makes the surface of the metal anti-corrosive and gives a better finish. {out
sourcing}
Honing: It is an abrading operation for hole finishing done by a tool fitted with a bonded
abrasive stone.
Lapping: It is a surface smoothing operation by hand or machine.
Painting: It will yield protective coating and better appearance.
Plating: It is an electrolytic process. This can be done with the help of silver, chromium,
cadmium,nickel and copper. Plating provides anticorrosive finish. {out sourcing}
Machining Process
Drilling: The work piece is clamped on the work table and drill is fed into for generating a hole
and enlarging an existing hole. It is the operation of making a uniform hole through the work
piece with the help of a cutter known as drill bit. The hole can be made by rotating the job also.
Facing: Facing is an operation of producing a smooth flat surface on the face of the job.
Flame cutting or gas cutting: It employs an oxyacetylene torch, which may be directed either
by hand or pantograph and cuts up to 40inch.thickness. Flame cutting is an inexpensive method.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
20/43
20
Gas cutting is the process of heating the metal to red hot temperature and then oxidising it by an
oxygen jet. The metal oxide is removed by the pressure of the oxygen jet. Oxyacetylene flame is
used for heating. A jet of high pressure oxygen is used to effect the cutting.
Pug Cutting M\CGas cutting set Are used under this concern
Grinding: It is a process of removing the metal form and finishing the surface of a metal object
by a grinder with the help of abrasive wheel rotating at high speed. It produces smooth and
accurate surface finely finished at a quicker rate. It is suitable for repetitive jobs and for mass
production.Grinding may be done on the job of any size or shape and on internal as well as
external surfaces. It ensures high dimensional accuracy and surface finish.
Angle grinder M\C 7 Angle Grinder M\C 5 these are used in this company most probably
Tapping: In this process, a multiple cutting tool called Tap is used for making threads on theinside surface of a hole but only one item is to be tapped in thi company the item name is
mentioned below
PNEU-FRM-A-01 (Sub Frame)
Machine Tools used in this company
Some of the machinery used in this company are given below
MIG Weld set(400 Amps) ESAB Make MIG Weld set(250 Amps) ESAB Make Arc Weld set
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
21/43
21
Pug Cutting M\C Gas cutting set Angle grinder M\C 7 Angle Grinder M\C 5 Abrasive cut off Machine Surface Table with Height gauge Veriner Caliper 2 Ton Manual hoist Hand pallet truck etc....
Some description about the same are given below
1)Lathe.
Lathes(a) Centre or Engine Lathe, (b) Capstan Lathe, and (c) Turret-Lathe.Lathes areused mainly for Turning, Boring and Screw-cutting and can be adapted for the operations
of Milling, Drilling, Slotting, Grinding, Gear and Rack cutting, Lapping, Facing,
Reaming, Polishing, and Knurling, Tapping and Parting off.
Principal Parts of a Lathe:
(1) The Bed, (2) The Headstock, (3) The Tailstock, which is also called the Loose Headstock,
(4) The Carriag, (5) The Gearbox, (6) The Feed Shaft and the Lead Screw.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
22/43
22
2) Pillar Drilling Machine:
A Pillar Drilling Machine is an upright Drilling Machine as distinct from a Radial
Drilling Machine It consists of a Work Table on which the job to be drilled is placed.The Work
Table can be adjusted sideways and vertically to accommodate jobs of different height. The arm
carries the Spindle in a Saddle which accommodates the Spindle driving motor and the
Gearboxes for providing different Spindle speeds and feeds.
3) Grinding Machines
Grinding machines are used for machining cylindrical and tapered
surfaces, for grinding internal and flat surfaces and slender bars and delicate parts.The main type
of grinding used inthis company is flat grinding only.
Jigs and Fixtures:
A Jig is an appliance to which a work to be machined can be, fastened andwhich contains a device for guiding the tool, so that the tool and the work are accurately located
with respect to each other. A Fixture is an appliance which holds the work when it is machined.
Uses of Jigs and Fixtures:
(1) Jigs quickly and accurately guide the tools. They render difficult operations
easier, speedier and yet more accurate.
(2) Jigs are suitable is mass production for producing accurately machined
interchangeable parts.
(3) Fixtures are essential almost all machine work, because the work must be
firmly held when the tools work.
(4) Fixtures used in conjunction with jigs increase speed and accuracy of work.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
23/43
23
Principles of Material Handling
Materials handling is a service function; it is not an end in itself. The principles
of materials handling can be grouped under three broad headings:
Principles relating to the elimination of wasteful methods,
Principles relating to the laying out the plant,
Principles relating to the selection and application of materials handling equipment.
Wasteful methods can be eliminated by following the undermentioned principles.
Avoiding the unnecessary transfer of materials from floor to workplace or from
container to container
Eliminating unnecessary mixing and subsequent storing,
Increasing the speed of handling the materials,
Utilizing gravity as a moving force, wherever practicable,
Introduction of automaticity into the materials handling system,
Reducing to a minimum the number of handlings of materials,
Using mechanical aids to eliminate the use of hand labour in the movement of
materials.
SOME OF THE IMPORTANT PERSONALITIES OF PRODUCTION
Mr.Kumar ( Fitter & Welder ) the details about his experiences and talents are given
already in the proprietor intro . Mr. Madhankumar he is working as a welder in thicompany. Mr. Sivakumar as a welder and acting as afitting assistant . Mr.
Devaraj the responsibilities of this guy is doing grinding and sandring works again
the final quality is checked by kumar and Vengatesh.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
24/43
24
PRODUCTS
The major products manufactured by this company is given below
1) Milltec industries Bangalore pvt ltd
SIEVE GAURDS
LC-WHIT-615-A-01
LC-WHIT-616-A-01
LC-WHIT-830-A-01
LC-WHIT-831-A-01
BASE FRAME
PNEU-FRM-A-O-01
CONE
LC-WHIT-503-P-01-Cone
MEGA CONE-513-P-01
LC-WHIT-237-A-01(CONE)
BKEL ITEMS
BKEL-808-A-01
BKEL-808-A-02
BKEL-802-A-01
BKEL-801-A-01
BKEL-801-A-02
ELEVATOR ITEMS
ELEV-802-A-01
ELEV-803-A-01
ELEV-803-A-02
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
25/43
25
MATERIAL CONSUMPTIONS
S.No Material
A SIEVE GUARD
LC- WHIT- 519- P- 01 PLAT
LC- WHIT- 519- P- 02 PLAT
LC- WHIT- 518- P- 01 PLAT
LC- WHIT- 520- P- 01 PLAT
LC- WHIT- 563- P- 01 -02
LC- WHIT- 615- P- 03
LC- WHIT- 615- P- 06
LC- WHIT- 615- P- 04
LC- WHIT- 615- P- 05
SIEVE GUARD BIG
LC- WHIT- 259- P- 01
LC- WHIT- 259- P- 02
LC- WHIT- 260- P- 01-02LC- WHIT- 261- P- 01
LC- WHIT- 261- P- 02
LC- WHIT- 262- P- 01
LC- WHIT- 831- P- 05
LC- WHIT- 818- P- 03
B SUB FRAME
LC-PNEU-FRM-P-01
LC-PNEU-FRM-P-02
LC-PNEU-FRM-P-03
LC-PNEU-FRM-P-04
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
26/43
26
LC-PNEU-FRM-P-05
LC-PNEU-FRM-P-07
LC-PNEU-FRM-P-08
LC-PNEU-FRM-P-09
C BKEL
808 LC-BKEL-808-P-01
LC-BKEL-808-P-02
LC-BKEL-808-P-03
LC-BKEL-808-P-04
LC-BKEL-808-P-05
D CONE
LC- WHIT- 503- P- 01 (CONE)
LC-MEGA-CONE-513- P- 01 (CONE)
LC- WHIT- 237- P- 01 (CONE)
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
27/43
27
FINANCE FUNCTIONS
Some of the important finance functions are given below. The finance function function is
performed by Mr. Babu he has the following duties in this concern.
Over looking the dispatches Billing the despatches Follow up of billing amounts Payment to taxes All other purchase activities
SOME OF THE IMPORTANT DOCUMENTARIES
DELIVERY CHALLAN
Delivery challan are used by both the companies that is while dispatching the materials
the supplier company use to issue the delivery challans while dispatching the materials to the
customers . At the same time the customers (outsourcing company) while giving the raw
materials they use to give the delivery challans to the processing company .The format of the
company Delivery challan is attached with the appendices.
1) The Address of the customer company
2) The Address of the supplier company
3) Land line, Mobile,& Fax numbers
4) TIN & CST Numbers
5) Delivery challan's number & date
6) e-SUGAM form serial number
7) Part number & name
8) Item Description
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
28/43
28
9) Quantity
10) Vehicle Number
11) Signature of the Authorized signatory
the above mentioned are the some of the important aspects exist on the delivery
Chillans.
Note:-
While handover the materials the authorized signature of the acceptor istaken by supplier
2) Usually the Delivery challans are 1+3 copies format because
A) Original copy (To be Handover at the stores)
B) Duplicate (To be Handover at the stores)
C) Triplicate (As a attested copy)
D) Book copy (Retained in the book itself)
The delivery challan plays a very important role in case of litigations . since this company
having the contracts to the companies in karnataka state in this condition there is a need to
transport the finished products to karnataka so this has to get the authorized attestation with RTO
check post for entry in such circumstance there is a need to mention the delivery challans
number. In the following pages the procedure how to dispatch a material is explained briefly.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
29/43
29
INVOICE
Normally the invoice is used by the supplier company only . while dispatching the
supplied raw materials as finished products they use to give the bills to the customer company
with the help of invoice .The format of the Invoice is attached with the appendices some of theimportant aspects exist on the Invoice are given below.
1) The Address of the customer company
2) The Address of the supplier company
3) Land line, Mobile,& Fax numbers
4) TIN & CST Numbers
5) Delivery challan's number& date
6) e-SUGAM form serial number
7) Part number & name
8) Item Description
9) Quantity
10) Vehicle Number
11) Signature of the Authorized signatory
Note:-
The invoice plays an major role for GRN Preparations. the company wont issue the money
immediately after receiving the invoice they have certain credit periods most propably this
company use to prefer the credit period from 30 days to 90 day for short cash rotation.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
30/43
30
PURCHASE ORDER
As I already mentioned in the previous pages (preliminary woks) if the company makes
the sample piece to get accepted by the customer company the company will issue the job order
in the name of the supplier company. The format of the purchase order ir attached with theappendices of the project . the important detail to be furnished in the purchase order is give
below.
1) The Address of the customer company
2) The Address of the supplier company
3) Land line, Mobile,& Fax numbers
4) TIN, CST ECC & VAT Numbers
5) Vendor code
6) Item code & Description
7) Quantity to be supply
8) Rate per Quantity
9) Date to be Delivered ( not applicable to production jobs)
10) Terms & conditions of payment
11) Authorized Signatory
12) Purchase order number& date
13) Mode & place of Delivery.
Note :-
In case of large number of supplier for the same item the purchase order will begiven with respect to quoted amount of the quotation given ( lowest quoter)
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
31/43
31
FORM JJ
JJ Forms are used to transport the finished products from one state to another state. A brief
description about the JJ form is given below. While entering the materials belongs to one state to
other state the acceptance of the same must be gain before entering this acceptance will be given
by the each and every checkpost of that respective states in this company they use to take the seal
and signature at the Attebele checkpost some of the important details to be furnished in the JJ
form are given below the format of the same is attached at the appendices.
IMPORTANT ASPECTS
TIN, SERIAL,CST Numbers (both consignor & consignee ) Assessment year Name and Adress of the consignor Name and Adress of the consignee Description of goods Quantity of weight or in numbers Value of goods e-SUGAM number Vehicle number Delivery challan number with date Authorized signatory The sign of the person to whom the goods are despatched
Etc......
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
32/43
32
QUOTATION
Quotation is one of the important document used by a company . if a company want to take a
new order at the first stage the company has to quote the rate to produce the product this can be
done with the help of quotation the format of the quotation is attached with the appendices.the
sample quotation by this company is given below.
Ite
m
cod
e Description
Lengt
h
Widt
h
Th
k
qt
y Wt.
Rat
e Amount
Transpo
rt
Handling
charges
Drillin
g
1
Beam 100X
50X 4MM 1730 4 1 16.31 58 945.98 500 81.55 140
2Piller 100X
50X 4MM 3000 4 2 56.52 58 3278.16 500 282.6 0
3Piller 100X
50X 4MM 3000 4 2 56.52 58 3278.16 500 282.6 0
4
SUPPORT
100X 50X
4MM 3000 4 2 56.52 58 3278.16 500 282.6 0
5Front Sheet 812 3000 2 1 38.2452 55
2103.48
6 500 191.226 30
6Base 100X
50X 4MM 14408 4 1
135.723
4 58
7871.95
5 500 678.6168 0
7Front Sheet 812 3000 2 1 38.2452 55
2103.48
6 500 191.226 30
8 Base 150 150 10 4 7.065 55 388.575 100 35 0
9Plank 2550 500 2 2 20.0175 55
1100.96
3 100 100.0875 10
10Front Sheet 1730 125 5 1
8.48781
3 55
466.829
7 100
84.87812
5 45
11
Support L-
Angle 30 x
30 100 5 6 1.413 55 77.715 100 100
12Break Water
Angle 70 40 3 1 0.06594 55 3.6267 100 0.3297 45
13 Break Water 70 40 3 1 0.06594 55 3.6267 100 0.3297 45
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
33/43
33
14Rib 30x 30
sq.tube 812 120 3 10
22.9471
2 58
1330.93
3 100 229.4712 0
15Front Sheet 1730 165 2 1
4.48156
5 58
259.930
8 100 41.448 70
16Support 220 60 5 8 4.1448 58
240.398
4 100 41.448 120
17Support 232 50 5 4 1.8212 58
105.629
6 100 50 18.212 20
18 Cover 260 360 5 1 3.6738 55 202.059 100 35 18.369 20
19Roof 202 3400 2 1
10.7827
6 55
593.051
8 100 107.8276 107.8276 0
20Frame 30x
30 sq.tube 8800 120 3 1 24.8688 58 1442.39 100 248.688 248.688 0
21 Hinge 0 450 20
22
Tube 30x
30x3mm 200 185 3 3 2.61405 58
151.614
9 50 26.1405
23Guide angle 3190 65 3 1
4.88309
3 58
283.219
4 50
48.83092
5
24.41546
3 25
24Guide 3190 25 14 1
8.76452
5 58
508.342
5 100 876.4525 100 30
25 Hinge 300 20 30
26Foot plate 1680 150 10 1 19.782 58
1147.35
6 100 1978.2 100 30
27 Shim 600 40 10 2 3.768 58 218.544 100 37.68 37.68 15
28
Floor (
wood) 3300 1000 25 12000
500
29
Floor (
wood) 710 100 25 2900
30
Floor (
wood) 1680 100 25 11500
31 Wheel 4 8000 1500
32 m10 x 80 40 1200
100
33 m10 nut 40 600
34 m10 screw 80 3200
547.730
749534.1
9 73408242.233
063278.603
1 705
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
34/43
34
Cost Break
1Material
Cost 49534
2Transportati
on 7340
3 Process cost 8242
4Handling
cost 3279
5 Drilling cost 705
6Fabrication
cost 9859
Total 78959
7Inventory
carring cost 1184
Total 80144
8 Over head 8014
Total 88158
9
Profit @
10% 8816
Total 96974
The above is the quotation given for faiveley transports. While preparing the quotation this
company takes more caution because it may determine the profit and loss of a project to prepare
such kind of huge amount of quotations this company takes the help of Mr. Sivakumar he is
working as a senior Engineer in Terex corporation this is situated opposite to my college this
company is sending the through e- Mails as well as manually
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
35/43
35
VALUE ADDED TAX INVOICE
This company is using two types of invoices one is for labour work that is all the materials given
by customer company this has company has to process the same and Dispatch that as finished
products in this case there is no need of tax invoice (Milltec) but to certain other cmpanies thecopany has to buy the raw materials(refer the quotation format) the tax invoice also having the
same format of the labour quotation.
CALCULATION OF VAT AMOUNT:-
Suppose the company have to receive the bill amount of Rs 100000 for this amount the
company has to take 12.5 percentage that is 12500 Rs. So the company will receive totally
112500 Rs for a product to produce the same product the company has to procure the raw
materiAls for that the company incurred a tax amount of Rs 10000 Then the company has to pay
2500 only (12500-10000=2500) for that invoice . the tax amount of the tax invioces must be paid
before 15th of the next month if not a penalty of 10 percent of the tax amount is applicable.Mr.
Senthilkumar is the auditor of this company his office is situated near Balagi theatre in Hosur.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
36/43
36
MARKETTING
The marketing functions under this company is performed by Mr.
Vengatesh as soon as the company received the payments a certain amount will be allocated to
this section he has to take care of the amounts some of the important functions performed by thi
guy is given below,
Searching for orders Procurement of raw materials Making arrangements for outsourcing Introducing the companies
OUT SOURCING
S,No Date Particulars Company Quant Rate Amt.
1 10 May Sieve grd bend SIVAM ENG 52 10 520
2 12-May cone_s SIVAM ENG 32 50 1600
12-May cone_B SIVAM ENG 5 75 375
11-May Sieve grd Box ACE 524 2 1050
15-May Sieve grd bend SIVAM ENG 110 10 1100
16-May Sieve grd bend ACE 110 2 2500
21-May Sieve grd bend SIVAM ENG 80 10 800
21-May Sieve grd bend ACE 80 2 1850
30-May Sieve grd bend SIVAM ENG 40 10 400
30-May Sieve grd Box ACE 40 2 1300
8-Jun cone-small Sivam Eng 76 50 3800
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
37/43
37
cone-Big Sivam Eng 11 75 825
Sieve Grd Sivam Eng 100 10 1000
9-Jun Sieve Grd ACE 1900 2 2800
17-Jun CONE`s Sivam Eng 52 50 2600
cone`B Sivam Eng 12 75 900
Sieve Grd Sivam Eng 14 10 140
Sieve Grd ACE 500 2 1000
Sieve Grd ACE 40 1900
Sieve Grd Sivam Eng 40 800
CREDITS
S.No DATE PARTICULARS AMT WHOM
1 10-May KUMAR 6000 VENGAT
2 16-May RAMESH 2500+10000 VENGAT3 22-May VENGATESH 7000 VENGAT
4 24-May KUMAR 5500 VENGAT
5 1-Jun RAMESH 90000
6 14-Jan VMR 4000 VENGAT
7 18-Jun RAMESH 3500 VENGAT
8 18-Jun VMR 35000
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
38/43
38
TRANSPORTS
S.NO DATE PARTICULARS AMT VEH NO DESTINATION
1 9-May TRAN 550 KA-03-2450 SH-JIG-SH
2 11-May TRAN 130 KA-03-2450 SH-ACE-SH
3 12-May TRAN 80 KA-03-2450 SH-SIVAM
4 14-May TRAN 650 KA-03-2450
5 14-May TRAN 130 KA-03-2450 Ace
6 16-May TRAN 130 KA-03-2450 Ace
7 20-May Mathesh 800 KA-51-3013 jig-ace
8 21-May TRAN 130 KA-03-2450 Ace
9 28-May TRAN 650 KA-03-2450 jig-ace
10 28-May TRAN 130 KA-03-2450 ESI
11 30-May TRAN 130 KA-03-2450 Ace
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
39/43
39
CHAPTER IV
FINDINGS
The Plant layout is well designed to facilitate the workers in their work The inter relationship between the departments are good. Welfare facilities provided are very good. They are maintaining the Relationship with employers and employees. They conducting the training programs very effectively for employees.
They have very good canteen facilities.
The Infrastructure is very well for working condition.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
40/43
40
SWOT-ANALYSIS:
STRENGTH:-
The locality of the company The quality of the products The co-ordination of the workers The type of competitor they have
WEAKNESS
The knowledge of the proprietor in cad Drawings The way in which they are utilizing the human Resource Power supply of that place
OPPURTUNITY
New orders from the existing vendors Demand for the product
THREATS
Introduction of new competitor Obsolescence of machinery Investments in new projects
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
41/43
41
SUGESSTIONS
The proprietor of the concern have to get some of theknowledge in CAD programming
A preplan should be there in using the Human personalities Procurement of power generators to avoid idle timings during production process Since the company is having large number of order it can go for modernization projects
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
42/43
42
CHAPTER V
CONCLUSION
During the period of training in your esteemed industry under the guidance of
MR.DEVARAJ, I gained the knowledge about the happenings in the industry, industrial
discipline, and responsibilities. Also I gathered some knowledge about the topics which are
mentioned above. The idea observed in the company would be useful for me in my career.
I able to know the industrial applications of the theories which me came across in
my subjects. The things which I grasped will be kept confidential according to my knowledge.
-
8/4/2019 A Study on Functional Areas 0f Vengateshwara
43/43
APPENDICES
QUOTATION DELIVERY CHALLAN INVOICE PURCHASE ORDER JJ FORM TAX INVOICE TIN CERTIFICATE INTRODUCTION LETTER DRAWINGS CASH BILL STATEMENT OF PAYMENTS