advanced wound care dressings staging reference guide

2
A Stage I pressure ulcer is an observable pressure related alteration of intact skin whose indicators as compared to the adjacent or opposite area on the body may include changes in one or more of the following: - Skin temperature (warmth or coolness), tissue consistency (firm or boggy feel) and/or sensation (pain, itching). The ulcer appears as a defined area of persistent redness in lightly pigmented skin, whereas in darker skin tones, the ulcer may appear with persistent red, blue, or purple hues. The beginning stage of a pressure sore has the following characteristics: • The skin is not broken. • The skin appears red on people with lighter skin color, and the skin doesn’t briefly lighten (blanch) when touched. • On people with darker skin, the skin may show discoloration, and it doesn’t blanch when touched. • The site may be tender, painful, firm, soft, warm or cool compared with the surrounding skin. At Stage II: • The outer layer of skin (epidermis) and part of the underlying layer of skin (dermis) is damaged or lost. • The wound may be shallow and pinkish or red. • The wound may look like a fluid-filled blister or a ruptured blister. At Stage III, the ulcer is a deep wound: • The loss of skin usually exposes some fat. • The ulcer looks crater-like. • The bottom of the wound may have some yellowish dead tissue. • The damage may extend beyond the primary wound below layers of healthy skin. Stage III Stage II Stage I All Wound Care Dressings are not made with natural rubber latex Bedsores fall into one of four stages based on their severity. e National Pressure Ulcer Advisory Panel, a professional organization that promotes the prevention and treatment of pressure ulcers, defines each stage as follows: Advanced Wound Care Dressings Staging Reference Guide

Upload: others

Post on 15-Jun-2022

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Advanced Wound Care Dressings Staging Reference Guide

A Stage I pressure ulcer is an observable pressure related alteration of intact skin whose indicators as compared to the adjacent or opposite area on the body may include changes in one or more of the following: -Skintemperature(warmthorcoolness),tissueconsistency(firmorboggyfeel) and/or sensation (pain, itching). Theulcerappearsasadefinedareaofpersistentrednessinlightlypigmentedskin, whereas in darker skin tones, the ulcer may appear with persistent red, blue, or purple hues.The beginning stage of a pressure sore has the following characteristics:• The skin is not broken.•Theskinappearsredonpeoplewithlighterskincolor,andtheskindoesn’tbriefly lighten (blanch) when touched.•Onpeoplewithdarkerskin,theskinmayshowdiscoloration,anditdoesn’tblanch when touched.•Thesitemaybetender,painful,firm,soft,warmorcoolcomparedwiththesurroundingskin.

At Stage II:•Theouterlayerofskin(epidermis)andpartoftheunderlyinglayerofskin(dermis) is damaged or lost.•Thewoundmaybeshallowandpinkishorred.•Thewoundmaylooklikeafluid-filledblisterorarupturedblister.

At Stage III, the ulcer is a deep wound:•Thelossofskinusuallyexposessomefat.•Theulcerlookscrater-like.•Thebottomofthewoundmayhavesomeyellowishdeadtissue.•Thedamagemayextendbeyondtheprimarywoundbelowlayersofhealthyskin.

Stage III

Stage II

Stage I

All Wound Care Dressings are not made with natural rubber latex

Bedsores fall into one of four stages based on their severity. The National Pressure Ulcer Advisory Panel, a professional organization that promotes the prevention and treatment of pressure ulcers, defines each stage as follows:

Advanced Wound Care DressingsStaging Reference Guide

Page 2: Advanced Wound Care Dressings Staging Reference Guide

Unstageable

At Stage IV:•Theouterlayerofskin(epidermis andpartoftheunderlyinglayerof skin (dermis) is damaged or lost.•Thewoundmaybeshallowand pinkish or red.•Thewoundmaylooklikeafluid- filledblisterorarupturedblister.

At Unstageable: a pressure ulcers surface is covered with yellow, brown, black or dead tissue. It’s not possible to see how deep the wound is.

ADVANCED WOUND CARE DRESSING PRODUCT LINE

Product Reorder No.'s and Sizes

Wound Stages

(Pressure Ulcers)

CuraFoam™ Foam Dressing

3011 – 2″ × 2″ 3012 – 4″ × 4¼″3013 – 6″ × 6″

II, III, IV

DynaDerm™ Hydrocolloid

Dressing (Thin; Extra-Thin; Standard)

3014 – 2″ × 2″ (Thin) 3015 – 4″ × 4″ (Thin)3016 – 6″ × 6″ (Thin) 3017 – 6″ × 7″ (Sacral)3018 – 4″ × 4″ (Extra Thin)3019 – 6″ × 6″ (Extra Thin) 3020 – 4″ × 4″ (Standard Dressing)

II, III, IV

DynaLevin™ Waterproof Adhesive

Bordered Foam

3021 – 4″ × 4″ 3022 – 6″ × 6″ II, III, IV

Foam Flex™ Non-Adhesive

Waterproof Foam Dressing

3023 – 2″ × 2″3024 – 4″ × 4″ 3025 – 6″ × 6″

II, III, IV

DynaGinate™ Calcium Alginate

Dressing

3026 – 2″ × 2″ 3027 – 4¼″ × 4¼″3028 – 4″ × 8″ 3029 – 2g × 30cm

III, IV

DynaGinate AG™ Silver Calcium

Alginate

3030 – 2″ × 2″ 3031 – 4″ × 5″3032 – 4″ × 8″ 3033 – ¾″ × 12″

N/A

DynaGuard™ Waterproof Composite Dressing

3035 – 4″ × 4″ 3036 – 6″ × 6″ II, III, IV

DynaFoam™ Waterproof

Bordered Foam3037 – 4″ × 4″ 3038 – 6″ × 6″ II, III, IV

Petroleum Gauze Dressing

3039 – 3″ × 9″ 3040 – 3″ × 9″ II, III, IV

CuraFoam™ AG Silver Foam

Dressing

3046 – 2″ × 2″3047 – 4″ × 4″ 3048 – 6″ × 6″

III, IV

DynaFoam™ AG Bordered

Silver Foam Dressing

3049 – 4″ × 4″ 3050 – 6″ × 6″ III, IV

SiliGentle™ Silicone Foam

Dressingand Silicone

Bordered Foam Dressing

Non-Bordered3055 – 2″ × 2″3056 – 4″ × 4″3057 – 6″ × 6″Bordered 3058 – 2″ × 2″ 3059 – 4″ × 4″3060 – 6″ × 6″ 3061 – Heel 4″ × 4″3062 – Sacral 6″ × 6″ 3063 – Lg Sacral 6″ × 6″

II, III, IV

DynaGel™ Hydrogel

Impregnated Gauze Dressing

3064 – 2″ × 2″ 3065 – 4″ × 4″ II, III, IV

Common sites of pressure sores:For people who use a wheelchair, pressure sores often occur on skin over the following sites:• Tailbone or buttocks• Shoulder blades and spine•BacksofarmsandlegswheretheyrestagainstthechairForpeoplewhoareconfinedtoabed,commonsites include the following:•Backorsidesofthehead•Rimoftheears• Shoulders or shoulder blades• Hip, lower back or tailbone• Heels, ankles and skin behind the knees

Stage IV

is your one-stop medical supply company since 1967

10 Glenshaw Street • Orangeburg, NY 10962 • www.dynarex.com

For more information contact your local Dynarex® distributor sales representative.

Or call 888-396-2739 to �nd your nearest distributor.

© 2019 Dynarex Corporation

Find us on:

Advanced Wound Care DressingsStaging Reference Guide