richter
Post on 05-Mar-2016
216 Views
Preview:
DESCRIPTION
TRANSCRIPT
Stone-Veneer®
A real piece of nature!
Your partner for furniture and architectural woodworking
Fantastic colours and surface structures are the result of splitting very thin stone layers. The GRP (glass fibre reinforced) back strengthens the stone layers of only a few hundreds of a millimetre thickness to become a plane sheet. Each stone sheet is unique.
We welcome your challenges.Eberhard Richter and Aristidis Tsakuridismanaging directors.
2 3
We create and produce products for the high end furniture industry,
architectural woodworking and lumber distribution. Together we
transform ideas to success. Our products are available as semi-finished
or completely finished:
• Edgebanding systems with competence in multi-layered
edgebanding in rolls
• Acoustic-Lightboard® – acoustically highly effective honeycomb
lightweight panels with micro-perforated surfaces
• Stone-Veneer® – real stone veneer ultra-thin for woodworking
Expect from us advanced and economically sound solutions – our
motivated and long time employees guarantee it.
The following pages will give you an overview about the variety of
Stone-Veneer®.
2 3
Perhaps only a minor matter to the Creator. But the combination
of existing conditions in some places of the earth during pre-historic
times has been the pre-requisite for the formation of slate. More
than 200 millions of years ago micro-grained depositions of clay mud
compounds were formed at the bottom of primeval oceans. These
compounds hardened by increased pressure and became mudstone.
Later during the formation of mountains these stone layers were splitted
by means of lateral pressure. During these processes the original
minerals were placed onto finest shear areas. They crystallized by means
of pressure and heat to become very flat minerals. The native rock
obtained a new foliated structure called slate.
Slate sources with many colours evolved in some places of the world
due to certain geological pre-conditions during the primeval formation
of slate.
These colour slates from selected sources are the raw material for
Stone-Veneer®.
First there was the ocean
• 11 unique stone types
• for furniture, wall und ceiling
• processing with standard tools
• each sheet is unique
• 11 unique stone types• 11 unique stone types• 11 unique stone types
• for furniture, wall und ceiling
• 11 unique stone types
Stone-Veneer®2 Your partner for furniture and
architectural woodworking
3 Formation of slate
4 Colour slate
6 Quartzite slate
8 Sand stone
10 Overview of products
Contents
4
The largest sources of quality colour slate which is only suitable for
Stone-Veneer® can be found in India, South Africa and Brazil.
Furnitures and interior woodwork can now finally be designed with
the natural surface of Stone-Veneer®. This was not possible in the
past with heavy, solid slate.
The variety of colours and the natural appeal to all the senses make
this architectural material very attractive. Colours like light grey,
natural or red and black exist for millions of years and have been
created through oxidation. The natural colours of colour slate are
resistant against light and UV. The original layers of colour slate are
extremely thin. With our specially developed technology it is now
possible for us to split these layers in a few hundreds of a millimetre
thickness.
Nano-Stone
This stone surface has a very thin water-jet tightened fleece on the back
and can be formed in a vertical and horizontal direction. This unique
product was introduced recently and won the prestigious “Design Plus”
contest in Frankfurt/Main.
Colour slate
The vivid oxidation colours are especially visible in Multi Color. Multi Color is a multi talent due to its colour, size and easy processing.
• furniture: tables, chairs, doors
• wall and floor
• bathroom, kitchen, interior design
• retail interiors and booth construction
• vehicle and ship interior
• furniture: tables, chairs, doors• furniture: tables, chairs, doors• furniture: tables, chairs, doors• furniture: tables, chairs, doors
• wall and floor
• furniture: tables, chairs, doors
Applications
Please specify your ideas –
we will design high-class products
with Stone-Veneer®.
5
Nano-Stone writing-case – for special fields of application as it is extremely thin and flexible
Autumn
Black Slate
Terra Red
Autumn Rustic
Autumn White
Multi Color
Vanity stand Multi Color, combined with white basin and drawers
Nano-Stone is a compound material made from Stone-Veneer® and a water-jet tightened fleece
Wall covering Black Slate with concealed, screwable tongue and groove system
Nano-Stone – winner of the ”Design Plus“ contest Material Vision 2009
6
Quartzite slate can be found all over the world. But only the soft rock
from South Africa and India can be splitted for Stone-Veneer®.
Compared to colour slate being flat and thin, quartzite slate is medium-
grained or coarse-grained. Quartzite slate consists of quartz and of
layers of silicate. These ingredients make the surface glimmer and
lightly shine.
It is a long way combined with great skill and careful handling from the
stone quarry to the finished sheet of Stone-Veneer®. Due to geological
conditions in nature, only limited sizes of quartzite slate can be mined.
The splitting process of quartzite slate is more difficult and involves
more labour to split than colour slate.
The partly rough surface structure of quartzite slate should not be used
for horizontal panels like countertops or flooring.
Quartzite slate
Ocean Green
Silver Shine
Copper
Jeera Green
• unique design
• light and flexible
• Stone-Veneer® available as finished
products of different sizes
• unique design• unique design• unique design
• light and flexible
• unique design
Characteristics
For further details please
take a look at page 10 and 11.
Contact us.
The structure of quartzite slate is rougher than of colour slate. The ingredients make the surface lightly shine.
Stone quarry Silver Shine
7
Wall covering with Stone-Veneer® Ocean Green
Copper emphasizes natural and little shiny points
Shop interior – wall with Ocean Green
Stone quarry Copper
Presotto SRL, Brugnera, Italy
8
Sandstone is a sedimentary rock consisting of cemented grains of sand
which mainly contains quartz. The sandstone for Stone-Veneer® Sahara
is mined in sand pits in Northern Germany. Sand is bonded vertically
with thermoplastic binders to large sheets.
Stone-Veneer® Sahara has a very attractive texture from its large
content of white quartz sand with stripes from light-brown to dark-
brown. Approximately 90 % of Stone-Veneer® Sahara is pure quartz
sand with a thickness of 1 – 2 mm.
Sandstone is suitable for interior and exterior applications. It can
be glued directly onto surfaces because of its backside support layer.
If heat is applied Sahara can also be formed three-dimensionally.
Sahara layers may also be glued onto engineered panels.
Sandstone
... is unique
Sahara ...
... each sheet
Sand pits are the source of attractive surfaces of Stone-Veneer® Sahara
• unique colours and surface structures
• nuances are natural and desired
• different mounting material and
surface finishings are available
• unique colours and surface structures• unique colours and surface structures• unique colours and surface structures• unique colours and surface structures
• nuances are natural and desired
• unique colours and surface structures
Always special
Each sheet is a natural product and
therefore unique and precious.
9
Stone-Veneer® Floor with Sahara Stone-Veneer® is flexible for almost any kind of shape
Fireplace panelling with Stone-Veneer® Sahara
Sahara wall panelling, unique colour and surface structure
Overview of products
Raw sizes and furniture fronts
Stone-Veneer® GFK
• GRP back, with primer for safe adhesion with one or two component PU adhesive or PUR hotmelt.
Stone-Veneer® Fleece
• Back with additional fleece layer which is compatible with all common glues and adhesives.
Stone-Veneer® MDF/Plywood
• Stone-Veneer® on engineered panels MDF 3, 12, 14, 18 mm,
Birch plywood 13 and 18 mm, balancing paper 160 g/m2, natural-coloured, or HPL 0,6 mm.
• The raw sizes are without edging. Tolerance +/- 2 mm.
• Upon request Stone-Veneer® as well as panels with Stone-Veneer® will be cut to size.
Stone-Veneer® Kitchen Doors
• Finished kitchen surfaces in Black Slate and Multi Color.
• Back and edges lacquered in black/anthrazite.
• Total thickness approx. 16 mm and approx. 20 mm.
10 11
Stone-Veneer®raw sizes and surfaces
stone type
raw sizesback optionalGRP or fleece
mounting panel2
MDF 3, 12, 14, 18 mm orBirch plywood 13, 18 mm
Kitchen Doors3
16 mm finished size20 mm finished size
100 Indian Autumn color slate
170 Autumn Rustic color slate
140 Autumn White color slate
400 Multi Color color slate
700 Terra Red color slate
800 Black Slate color slate
500 Ocean Green quarzite slate
600 Silver Shine quarzite slate
200 Copper quarzite slate
300 Jeera Green quarzite slate
900 Sahara1 sand stone
1220
x 6
10
2100
x 1
050
2400
x 9
00
2510
x 6
10
2600
x 1
220
1220
x 6
10
2100
x 1
050
2510
x 6
10
2400
x 9
00
2600
x 1
220
up to
120
0 x
600
up to
205
0 x
1000
up to
238
0 x
880
available size of the stone type 1 Sahara always with back support layer.2 Stone-Veneer® mounting panels and back support layer are glued with PUR hotmelt. 2 mm thickness of Stone-Veneer® and support layer must be added to thickness of mounting panel. Upon customer‘s request Stone-Veneer® sheets as well as engineered panels can be cut to size. Stone-Veneer® combined with mounting panels made of Birch plywood is water-resistant. 3 Edges and back are lacquered in black/anthrazite. Cut to size upon request.
itemNo.
Prefabricated sizes
Stone-Veneer® Wall
• Wall covering with PU hard foam backer applied with tile adhesive.
• Total thickness 8,5 mm.
Stone-Veneer® Floor
• Stone floor for soft walking and easy on the back.
• Three layers, back with recycled rubber granulates.
• Total thickness approx. 6,5 mm.
Stone-Veneer® Panel
• Panel with concealed, screwable tongue and groove system.
• Total thickness 15 mm.
• Compatible with our Acoustic-Lightboard® panels.
Stone-Veneer® Peel & Stick
• With self-adhesive film, long-lasting from light to temporary applications.
10 11
For further details regarding raw and prefabricated sizes please
take a look at the technical data sheets.
Stone-Veneer®prefabricated sizes
stone type
Wall8,5 mmsuper-matt
Floor6,5 mmnanopearls
Panel15 mmsuper-matt
Peel & Stick1,5 up to 2 mmsuper-matt
100 Indian Autumn color slate
170 Autumn Rustic color slate
140 Autumn White color slate
400 Multi Color color slate
700 Terra Red color slate
800 Black Slate color slate
500 Ocean Green quartzite slate
600 Silver Shine quartzite slate
200 Copper quartzite slate
300 Jeera Green quartzite slate
900 Sahara sand stone
1200
x 6
00
1200
x 3
00
600
x 30
0
1200
x 3
00
600
x 30
0
600
x 60
0
1200
x 6
00
1200
x 3
00
600
x 30
0
1200
x 6
00
1200
x 3
00
600
x 30
0
standard size
available on request
itemNo.
total thicknesssurface protection
Richter Veneer Technology1300 Tech CourtWesminster, MD 21157p: 888-872-4780f: 877-835-0895info@richter-veneertechnology.com
Bernard Olschewski, Inc.
top related