b & t oilfield products wireline equipment & tools...

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359

B & T OILFIELD PRODUCTS Wireline Equipment & Tools Catalog

LOUISIANA 117 Spinner Dr.

Broussard, LA 70518 (337) 837-5359 FAX (337) 837-5379

Email: [email protected]

TEXAS 798 FM 517 Bldg. A

Alvin, TX 77511 (281) 756-8716 FAX (281) 756-8717


CANADA #6, 7895 – 49 Ave.

Red Deer, AB CANADA, T4P 2B4 (403) 340-0980 FAX (403) 340-8581


ALASKA 7801 Schoon St. Unit C Anchorage, AK 99518

(907) 272-7817 FAX (907) 272-7847 Email: [email protected]

Last Updated: March 9, 2010

Table of Contents Section I – Locks A-1 Section II – Plugs B-1 Section III – Packoff Equipment C-1 Section IV – Surface Equipment D-1 Section V – Fishing Tools E-1 Section VI – Tool String Equipment F-1 Section VII – Running Tools G-1 Section VIII – Pulling Tools H-1 Section IX – Prongs I-1 Section X – Shifting Tools J-1 Section XI – Bailers K-1 Section XII – Baker Tools L-1 Section XIII – Testing Equipment M-1 Section XIV – BHP Equipment N-1 Section XV – Miscellaneous Equipment O-1

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 A-1

Section I LOCKS


D Lock

The D Lock is used to land and lock in any collar recess of API collared tubing. The sealing element is mechanically locked in the set position so that pressure differentials can be held above and below. It can be used in conjunction with pump thru plugs, positive plugs, safety valves, standing valves, and packoffs.

SPECIFICATIONS 2" 2 1/2" 3" Fishneck ID 1.375 1.812 2.312 Max OD 1.84 2.281 2.844 Minimum ID 0.938 1.375 1.75 Bottom Thread

1 5/16"-18

1 21/32"-14

2 1/8"-12

Running Tools 2" D 2-1/2" D 3" D Pulling Tool 2" GS 2-1/2" GS 3" GS


D Lock 2" 2-1/2" Assembly DLABT-02000-05 DLABT-02500-05 Locking Sleeve DCLS-02000-05 DCLS-02500-05 Collet DLCO-02000-05 DLCO-02500-05 Dog (4) DLDO-02000-05 (4) DLDO-02500-05 Fishneck DLFN-02000-05 DLFN-02500-05 Housing DLHO-02000-05 DLHO-02500-05 Locking Mandrel DLLM-02000-05 DLLM-02500-05 Packing Mandrel DLPM-02000-05 DLPM-02500-05 Bottom Retainer DLBR-02000-05 DLBR-02500-05 Top Retainer DLTR-02000-05 DLTR-02500-05 Packoff 2" G Packoff 2-1/2" G Packoff Oring -218 N90 -223 N90 Oring -219 N90 -224 N90


RBT / RNBT Lock

The RBT Lock is a selective lock that can be installed in “R” landing nipples. It is used in heavier weight tubing due to higher well pressure. This lock uses keys to engage a profile in the landing nipple and an integrated packing mandrel that allows it to hold pressure differentials from either above or below. This lock can be used in conjunction with pump through plugs, positive plugs, safety valves, and standing valves. The RNBT Lock is the “no go” version of the RBT Lock. The keys have an angled shoulder, designed to fit into the bore restriction of the nipple.

1.710" 1.781" 1.875"

Minimum ID .750" .875" .875"

Fishneck ID 1.062" 1.375" 1.375"Bottom Thread Connection 1 1/8"-16 1 3/8"-14 1 3/8"-14Running Tool RLRT-01710-01 RLRT-01781-01 RLRT-01875-01Pulling Tool GSPT-01500-01 GSPT-02000-01 GSPT-02000-01

OPERATING GUIDE

2.000" 2.125" 2.188" 2.313" 2.562" 3.688"

Minimum ID .875" .875" 1.125" 1.125" 1.375" 2.375"

Fishneck ID 1.375" 1.375" 1.812" 1.125" 1.812" 3.125"Bottom Thread Connection 1 3/8"-14 1 3/8"-14 1 3/4"-12 1 3/4"-12 2"-12 SLB 3 1/16"-12 SLB

Running Tool RLRT-02000-01 RLRT-02125-01 RLRT-02188-01 RLRT-02313-01 RLRT-02562-01 RLRT-03688-01

Pulling Tool GSPT-02000-01 GSPT-02000-01 GSPT-02500-01 GSPT-02500-01 GSPT-02500-01 GSPT-0400-01


"R"/"RN" Lock 1.710" 1.781" 1.875" 2.125"

R Assembly RLABT-01710-09 RLABT-01781-09 RLABT-01875-09 RLABT-02125-09 RN Assembly RNABT-01710-09 RNABT-01781-09 RNABT-01875-09 RNABT-02125-09 Fishneck RLFN-01710-09 RLFN-01781-09 RLFN-01875-09 RLFN*02125-09 Expander Mandrel RLEM-01710-09 RLES-01781-09 RLEM-01875-09 RLEM-02125-09 Key Retainer RLKR-01710-09 RLKR-01781-09 RLKR-01875-09 RLKR-02125-09

Key Spring (3) RLKS-01781-

08 (3) RLKS-01781-

08 (3) XLKS-02025-

08 (3) XLKS-02025-

08 Key

R Key (3) RLKO-01710-

09 (3) RLKO-01781-

09 (3) RLKO-01875-

09 (3) RLKO-02125-

09

RN Key (3) RNLK-01710-

09 (3) RNLK-01781-

09 (3) RNLK-01875-

09 (3) RNLK-02125-

09 Packing Mandrel RLPM-01710-09 RLPM-01781-09 RLPM-01875-09 RLPM-02125-09

Backup Ring (2) OFAO-01710-

09 (2) OFAO-01781-

09 (2) OFAO-01875-

09 (2) OFAO-02125-

09 Vee Packing (8) 91V3378 (8) 91V3309 (6) 91V310 (8) 91V3451 Adapter Ring OMAO-01710-09 OMAO-01781-09 OMAO-01875-09 OMAO-02125-09


"R"/"RN" Lock 2.188" 2.313" 2562" 3.437"

R Assembly RLABT-02188-09 RLABT-02313-09 RLABT-02562-09 RLABT-03437-09 RN Assembly RNABT-02188-09 RNABT-02313-09 RNABT-02562-09 RNABT-03437-09 Fishneck RLFN-02188-09 RLFN-02188-09 RLFN-02562-09 RLFN-03437-09 Expander Mandrel RLEM-02188-09 RLEM-02188-09 RLEM-02562-09 RLEM-03437-09

Key Retainer RLKR-02188-09 RLKR-02313-09 RLKR-02562-09 RLKR-03437-09

Key Spring (3) XLKS-02025-08

(3) XLKS-02025-08

(3) XLKS-02025-08

(4) XLKS-03000-08

Key

R Key (3) RLKO-02188-09

(3) RLKO-02313-09

(3) RLKO-02562-09

(4) RLKO-03437-09

RN Key (3) RNLK-02188-09

(3) RNLK-02313-09

(3) RNLK-02562-09

(4) RNLK-03437-09

Packing Mandrel RLPM-02188-09 RLPM-02313-09 RLPM-02562-09 RLPM-03437-09

Backup Ring (2) OFAO-02188-09

(2) OFAO-02313-09

(2) OFAO-02562-09

(2) OFAO-03437-09

Vee Packing (8) 91V38 (8) 91V318 (10) 91V4400 (6) 91V4385 Adapter Ring OMAO-02188-09 OMAO-02313-09 OMAO-02562-09 OMAO-03437-09 Oring N/A N/A -031 V75 -037 V90 Flat Spring N/A N/A N/A RLFS-03688-08


"R"/"RN" Lock 3.688" 4.313" 4.562"

R Assembly RLABT-03688-09 RLABT-04313-09 RLABT-04562-09 RN Assembly RNABT-03688-09 RNABT-04313-09 RNABT-04562-09 Fishneck RLFN-03688-09 RLFN-04313-09 RLFN-04562-09 Expander Mandrel RLEM-03688-09 RLEM-04313-09 RLEM-04562-09 Key Retainer RLKR-03688-09 RLKR-04313-09 RLKR-04562-09 Key Spring (4) XLKS-03000-08 (4) XLKS-03813-08 (4) XLKS-03813-08 Key

R Key (4) RLKO-03688-09 (4) RLKO-04313-09 (4) RLKO-04562-09 RN Key (4) RNLK-03688-09 (4) RNLK-04313-09 (4) RNLK-04562-09

Packing Mandrel RLPM-03688-09 RLPM-04313-09 RLPM-04562-09 Backup Ring (2) OFAO-03688-09 (2) OFAO-04313-09 (2) OFAO-04562-09 Vee Packing (6) 91V3334 (6) 91V4374 (6) 91V3309 Adapter Ring OMAO-03688-09 OMAO-04313-09 OMAO-04562-09 Oring -040 V75 -042 V90 -048 V90 Flat Spring RLFS-03688-08 N/A (2) XLFS-03813-08


S Lock

The S Lock in conjunction with the locating assembly is used to lock into the polished seal bore of the Type ‘S’ Landing Nipple. It can withstand pressure from above and below. It can be used in conjunction with pump through plugs, positive plugs, standing valves, and safety valves.

SPECIFICATIONS 1.875 2.313

Fishneck OD 1.375 1.75 Packing OD 1.875 2.313 Minimum ID 0.688 0.875 Bottom Thread 1 1/8"-12 1 11/32"-14

Running Tool JDCBT-02000-

01 JDCBT-02500-

01 Pulling Tool RSPT-02000-01 RSPT-02500-01


S Lock 1.875 2.313 Assembly SLABT-01875-03 SLABT-02313-03 Dogs (4) SLDO-01875-03 (4) SLDO-02313-03 Packing Section SLPS-01875-03 SLPS-02313-03 Running Neck SLRN-01875-03 SLRN-02313-03 Slip Carrier SLSC-01875-03 SLSC-02313-03 Backup Ring (2) OFAO-01875-09 (2) OFAO-02313-09 Adapter Ring OMAO-01875-09 OMAO-02313-09 Packing (8) 91V310 (8) 91V318


S Locator

The S Locator Mandrel is made up to the bottom of the S Lock Mandrel to set in Type S Landing Nipples. It is the position number of the keys on the locator mandrel that allow the locking mandrel to be termed selective. By changing the keys from one position to another, you may set the locking mandrel in one of five different nipples in the tubing string. The spring loaded position keys “seek out” and locate the corresponding position nipple and prevent the lock from traveling out of the bottom of that nipple. Once this is accomplished, the locking mandrel would hold pressure from below while the locator mandrel would hold pressure from above.

SPECIFICATIONS 1.250" 1.500" 1.625" 1.875" 2.313" 2.875" 3.813"

Max OD (Keys Retracted) 1.171" 1.406" 1.437" 1.812" 2.203" 2.760" 3.718" Minimum ID 15/32" 9/16" 9/16" 45/64" .875" 1.500" 2.250" Top Thread 11/16"-16 7/8"-14 7/8"-14 1 1/8"-12 1 11/32"-14 1 7/8"-12 2 3/4"-12 Bottom Thread 3/4"-16 7/8"-14 7/8"-14 1 3/16"-14 1 9/16"-12 2"-12 2 7/8"-12


W Lock Mandrel

The W Lock is used in wells that are not quipped with landing nipples during completion. They are attached to the wall of the rubbing and during the running procedure, its element is expanded to seal against the tubing wall. It can only hold a differential pressure from below. It can be used in conjunction with pump through plugs, regulators, safety valves, and bottom hole chokes.

SPECIFICATIONS 2" 2-1/2" 3"

Fishneck OD 1.375 1.75 2.313 Max OD (Slips Expanded) 2.078 2.54 3.075 MAX OD (Slips Retracted) 1.859 2.3 2.844 Minimum ID 11/16" 0.891 1.375 Running Tool 2" W 2" W 3" W

Pulling Tool 2" JDC 2-1/2" JDC 3" JDC

Roll Pin 1/8" X 3/8" 1/8" X 1/2" 1/8" X 1/2"

Shear Pin 3/16" X 7/16"

3/16" X 1/2"

3/16" X 1/2"

Bottom Thread 1 3/16"-14 1 9/16"-12 2"-12


W Lock 2" 2-1/2" 3" Assembly WLBT-02000-01 WLBT-02500-01 WLBT-03000-01 Band WLBO-02000-01 WLBO-02500-01 WLBO-03000-01 Expander WLEO-02000-01 WLEO-02500-01 WLEO-03000-01 Main Mandrel WLMM-02000-01 WLMM-02500-01 WLMM-03000-01 Slip Carrier WLSC-02000-01 WLSC-02500-01 WLSC-03000-01 Slips (3) WLSL-02000-01 (3) WLSL-02500-01 (3) WLSL-03000-01 Slip Mandrel WLSM-02000-01 WLSM-02500-01 WLSM-03000-01 Sleeve WLSO-02000-01 WLSO-02500-01 WLSO-03000-01 Element 2" W Element 2-1/2" W Element 3" W Element


XBT / XNBT Lock

The XBT-Lock is a selective lock that can be installed in “X” landing nipples. It is used in standard weight tubing. This lock uses keys to engage a profile in the landing nipple and an integrated packing mandrel that allows it to hold pressure differentials from either above or below. This lock can be used in conjunction with pump through plugs, positive plugs, safety valves, and standing valves. The XNBT-Lock is the “no go” version of the XBT-Lock. The keys have an angled shoulder, designed to fit into the bore restriction of the nipple.

1.500" 1.625" 1.875"

Minimum ID .750" .750" 1.000"

Fishneck ID 1.062" 1.062" 1.375"

Bottom Thread Connection 1 1/8"-16 1-1/8"-16 1 3/8"-14

Running Tool XLRT-01500-01 XLRT-01625-01 XLRT-01875-01

Pulling Tool GSPT-01500-01 GSPT-01500-01 GSPT-02000-01

OPERATING GUIDE

2.313" 2.750" 2.813"

Minimum ID 1.375" 1.750" 1.750"

Fishneck ID 1.812" 2.313" 2.313"

Bottom Thread Connection 1 3/4"-12 2 1/4"-12 SLB 2 1/4"-12 SLB

Running Tool XLRT-02313-01 XLRT-2750-01 XLRT-02813-01

Pulling Tool GSPT-02500-01 GSPT-03000-01 GSPT-03000-01


"X"/"XN" Lock 1.500" 1.625" 1.875" 2.313" X Assembly XLABT-01500-09 XLABT-01625-09 XLABT-01875-09 XLABT-02313-09 XN Assembly XNABT-01500-09 XNABT-01625-09 XNABT-01875-09 XNABT-02313-09 Fishneck XLFN-01500-09 XLFN-01625-09 XLFN-01875-09 XLFN-02313-09 Expander Sleeve XLEM-01500-09 XLEM-01500-09 XLEM-01875-09 XLEM-02313-09 Key Retainer XLKR-01500-09 XLKR-01625-09 XLKR-01875-09 XLKR-02313-09

Key Spring (2) XLKS-01500-

08 (2) XLKS-01500-

08 (2) XLKS-02025-

08 (2) XLKS-02025-

09 Key

X-Key (2) XLKO-01500-

09 (2) XLKO-01625-

09 (2) XLKO-02000-

09 (2) XLKO-02500-

09

XN Key (2) XNLK-01500-

09 (2) XNLK-01625-

09 (2) XNLK-02000-

09 (2) XNLK-02500-

09 Packing Mandrel XLPM-01500-09 XLPM-01625-09 XLPM-01875-09 XLPM-02313-09

Back Up Ring (2) OFAO-01500-

09 (2) OFAO-01625-

09 (2) OFAO-01875-

09 (2)OFAO-02313-

09 Vee Packing (6) 91V347 (6) 91V346 (6) 91V310 (6) 91V318 Adapter Ring OMAO-01500-09 OMAO-01625-09 OMAO-01875-09 OMAO-02313-09 API "X" Lock XLABT-01875-99 XLABT-02313-99


"X"/"XN" Lock 2.750" 2.813" 3.313 X Assembly XLABT-02750-09 XLABT-02813-09 XLABT-03313-09 XN Assembly XNABT-02750-09 XNABT-02813-09 XNABT-03313-09 Fishneck XLFN-02750-09 XLFN-02750-09 XLFN-03313-09 Expander Sleeve XLEM-02750-09 XLEM-02750-09 XLEM-03313-09 Key Retainer XLKR-02750-09 XLKR-02813-09 XLKR-03313-09 Key Spring (3) XLKS-03000-08 (3) XLKS-03000-08 (3) XLKS-03813-08 Key

X-Key (3) XLKO-02750-09 (3) XLKO-02813-09 (3) XLKO-03313-09 XN Key (3) XNLK-02750-09 (3) XNLK-02813-09 (3) XNLK-03313-09

Packing Mandrel XLPM-02750-09 XLPM-02750-09 XLPM-03313-09 Back Up Ring (2) OFAO-02750-09 (2) OFAO-02813-09 (2) OFAO-03313-09 Vee Packing (8) 91V3376 (6) 91V1330 (6) 91V3317 Adapter Ring OMAO-02750-09 OMAO-02813-09 OMAO-03313-09 Oring N/A N/A -037 V90


"X"/"XN" Lock 3.813 4.562 X Assembly XLABT-03813-09 XLABT-04562-09 XN Assembly XNABT-03813-09 XNABT-04562-09 Fishneck XLFN-03813-09 XLFN-04562-09 Expander Sleeve XLEM-03813-09 XLEM-04562-09 Key Retainer XLKR-03813-09 XLKR-04562-09 Key Spring (3) XLKS-03813-08 (4) XLKS-04562-09 Key

X-Key (3) XLKO-03813-09 (4) XLKO-04562-09 XN Key (3) XNLK-03813-09 (4) XNLK-04562-09

Packing Mandrel XLPM-03813-09 XLPM-04562-09 Back Up Ring (2) OFAO-03813-09 (2) OFAO-04562-09 Vee Packing (6) 91V320 (6) 91V3309 Adapter Ring OMAO-03813-09 OMAO-04562-09 Flat Spring XLFS-03813-08 XLFS-03813-08 Oring -039 V90 -048 V90


Check Set Tool These tools are used to insure that the “BTX” and “BTR” Locks have properly been set in the appropriate landing nipple. A sheared pin in the tool, once it has been run, indicates that the lock has been properly set. It is lowered downhole to the locking mandrel using standard wireline tools.

SPECIFICATIONS

1 1/2" 2" 2.188 2 1/2"

Fishneck 1.188" 1.375" 1.375" 1.375"

Thread Connection 15/16"-10 15/16"-10 15/16"-10 15/16"-10

Brass Shear Pin 3/16" X 1 1/4" 1/4" X 1 5/8" 1/4" X 1 7/8" 1/4" X 1 7/8"


Check Set Tool 1.500" 1.875" 2.188" 2.313"

Assembly CSTBT-01500-01 CSTBT-01875-01 CSTBT-02188-01 CSTBT-02313-01

Body CSTB-01500-01 CSTB-01875-01 CSTB-02188-01 CSTB-02313-01

Shear Ring CSTSR-01500-01 CSTSR-01875-01 CSTSR-02188-01 CSTSR-02313-01

Nut CSTN-01500-01 CSTN-01875-01 CSTN-02188-01 CSTN-02313-01

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 B-1

Section II Plugs


C Plug

The Type C Equalizing Plug is an equalizing sub that holds pressure from the bottom only. It can be used as a pump through plug if needed. The bean has a secondary valve which sticks out above the beans that must be pushed off seat, using an equalizing prong made up the proper pulling tool, in order to equalize.

SPECIFICATIONS 2" 2-1/2"

Thread Connection 1 3/16"-14 1 9/16"-12 Flow Area (Sq. In) 0.0075 0.0075 Roll Pin 1/4" X 3/4" 1/4" X 7/8"

2" 2-1/2" Assembly CPBT-02000-01 CPBT-02500-01 Housing CPHO-02000-01 CPHO-02500-01 Spring CPSO-02000-01 CPSO-02000-01 Valve CPSV-02000-01 CPSV-02000-01 Cage DPCO-02000-01 DPCO-02500-01 Cage Spring DPSP-02000-07 DPSP-02500-07


D Plug

The Type D Equalizing Plug holds pressure from below. It can be used in conjunction with many locking devices to bleed off a well in order to perform repairs or replacement of surface equipment. It also has pump thru capabilities that would allow an operator to kill a well. A pulling prong is needed to equalized these subs. The prong lifts a spring loaded equalizing dart off seat which allows either fluid bypass or pressure equalizing.


Max OD 1.75 2.125 ID Bore 0.531 0.719 Thread Connection 1 3/16"-14 19/16"-12 Flow Area 0.221 0.406

Set Screw 1/4"-20 X

1/4" 1/4"-20 X

1/4"


D Plug

2" 2-1/2" 3" Assembly DPBT-02000-01 DPBT-02500-01 DPBT-03000-01 Hycar 91T3 D 91T4 D 91T8 Cap DPCA-02000-01 DPCA-02000-01 DPCA-02000-01 Cage DPCO-02000-01 DPCO-02500-01 DPCO-03000-01 Plunger DPCP-02000-01 DPCP-02500-01 DPCP-03000-01 Dart DPDO-02000-01 DPDO-02000-01 DPDO-02000-01 Spring DPDS-02000-07 DPDS-02000-07 DPDS-02000-07 Equalizing Sub DPES-02000-01 DPES-02500-01 DPES-03000-01 Hycar Retainer DPHR-02000-01 DPHR-02500-01 DPHR-03000-01 Spring DPSP-02000-07 DPSP-02500-07 DPSP-03000-07 Stem DPST-02000-01 DPST-02500-01 DPST-03000-01


DD Bridge Plug

The DD Bridge Plug is used in conjunction with the D Lock to make a positive plug that will hold pressure from above and below. Equalization is achieved by shearing a disc prior to the pulling process.


Thread Connection 1 5/16"-18 1 21/32"-14

2" 2-1/2" Assembly DDBP-02000-05 DDBP-02500-05 Core DDBC-02000-05 DDBC-02500-05 Nut DDBN-02000-05 DDBN-02500-05 Bean DDMB-02000-05 DDMB-02500-05 Shear Disc DDSD-02000-07 DDSD-02500-07


PN Plug

The PNPA Plug is used with the “N” Type Locking Mandrel to hold pressure from above and below in an “N” Landing Nipple. It is commonly used to plug an SLABT lock to perform repairs, tests and to install replacement items above the plug. Equalization is performed by pulling the prong from the plug assembly.

2"Fishneck OD 1.00"Max OD 1.50"Pulling Tool JDCBT-01375-01Lower Thread 3/8" NPTUpper Thread 1 3/16"-14Shear Pin 3/16" X 7/8"

OPERATING GUIDE

PN Assembly PNPA-02000-01 Cage PNCO-02000-01 Adapter Sub PNAS-02000-01 Fishneck PNFN-02000-01 Watermelon PNWO-02000-01 Oring (2) -113 N70 Prong PNPO-02000-01 Oring -011 N70 Oring -012 N70


PXBT / PRBT Plug

The “PRBT” Plug is a positive plug used with the Type “R” Landing Nipple and “RBT” Locks. It can be used to test tubing or plug tubing for repairs or replacements. Pulling the prong from the assembly achieves equalization The “PXBT” Plug is used the same way as the “PR” except its use is for “X” Nipples and “XBT” Locks.

2 Piece Housing


PRBT / PXBT Plug "PX" OPERATING GUIDE

1.500" 1.625" 1.875" 2.313"

Fishneck OD 1.00" 1.00" 1.375" 1.375" No Go OD 1.490" 1.615" 1.865" 2.300"

Thread Connection 1 1/8"-16 1 1/8"-16 1 3/8"-14 1 3/4"-12

Prong Running/ Pulling Tool

JDCBT-01375-01 SBPT-01250-01

JDCBT-01375-01 SBPT-01250-01

JDCBT-02000-01 SBPT-02000-01

JDCBT-02000-01 SBPT-02000-01

Equalizing Flow Area .049" .049" .070" .175" 2.750" 2.813"

Fishneck OD 1.375" 1.375" No Go OD 2.740" 2.800"

Thread Connection 2 1/4"-12 SLB 2-1/4"-12 SLB


JDCBT-02000-01 SBPT-02000-01

JDCBT-02000-01 SBPT-02000-01

Equalizing Flow Area .175" .175"

"PR" OPERATING GUIDE 1.710" 1.781" 1.875" 2.125"

Fishneck OD 1.187" 1.187" 1.187" 1.187" No Go OD 1.700" 1.770" 1.865" 2.115"

Thread Connection 1 1/8"-16 1 1/8"-16 1 3/8"-14 1 3/4"-12


JDCBT-01500-01 SBPT-01500-01

JDCBT-01500-01 SBPT -01500-01

JDCBT-01500-01 SBPT-01500-01

JDCBT-02000-01 SBPT-02000-01

Equalizing Flow Area .049" .049" .049" .049" 2.188" 2.562"

Fishneck OD 1.375" 1.375" No Go OD 2.175" 2.550"

Thread Connection 1 3/4"-12 2"-12 SLB


JDCBT-02000-01 SBPT-02000-01

JDCBT-02000-01 SBPT-02000-01

Equalizing Flow Area .049" .049"


"PR" Plug 1.710" 1.781" 1.875" 2.125" Assembly PRBT-01710-01 PRBT-01781-01 PRBT-01875-01 PRBT-01710-01 Housing PRHO-01710-09 PRHO-01781-09 PRHO-11875-09 PRHO-02125-09 Cap PRPC-01710-09 PRPC-02125-09 ***** PRPC-02125-09 Prong Assembly PRPA-01710-01 **** ***** PRPA-02125-01

Prong PRPO-01710-01 PRPO-02125-01 PRPO-02125-01 PRPO-02125-01

Nose PRPN-01710-09 PRPC-02125-09 PRPC-02125-09 PRPN-02125-09

Spacer Rings OSPR-01710-09 OSPR-02125-09 OSPR-02125-09 OSPR-02125-09

Adapter Ring (2) OMPR-01710-

09 (2) OMPR-02125-

09 (2) OMPR-02125-

09 (2) OMPR-02125-

09

Backup Ring (2) OFPR-01710-

09 (2) OFPR-02125-

09 (2) OFPR-02125-

09 (2) OFPR-02125-

09

Vee Packing (12) 91V4007 (12) 91V172 (12) 91V172 (12) 91V172


"PR" Plug

2.188" 2.562" 3.437 3.688" Assembly PRBT-02188-01 PRBT-02562-01 PRBT-03437-01 PRBT-03688-01 Housing PRHO-02188-09 PRHO-02562-09 PRHO-03437-09 PRHO-03688-09 Cap XESC-01875-09 PRPC-02562-09 ***** ***** Prong Assembly ***** ***** ***** *****

Prong PXPO-01875-01 PXPO-02313-01 PRPO-03437-09 PRPO-03437-09

Nose PXPN-01875-09 PXPN-02313-09 PXPN-02750-09 PXPN-02750-09

Spacer Rings OSPX-01875-09 OSPX-02313-09 OSPX-02750-09 OSPX-02750-09

Adapter Ring (2) OMPX-01875-

09 (2) OMPX-02313-

09 (2) OMPX-02750-

09 (2) OMPX-02750-

09

Backup Ring (2) OFPX-01875-

09 (2) OFPX-02313-

09 (2) OFPX-02750-

09 (2) OFPX-02750-

09

Vee Packing (12) 91V3308 (16) 91V345 (12) 91V3618 (12) 91V3618 Oring ***** -030 N90 ***** ***** ** 1-piece housings available on request


"PX" Plug

1.500" 1.625" 1.875" 2.313" Assembly PXBT-01500-21 PXBT-01625-01 PXBT-01875-01 PXBT-02313-01 Housing PXHO-01500-09 PXHO-01625-09 PXHO-01875-09 PXHO-02313-09 Cap PRPC-01710-09 PRPC-01710-09 ***** ***** Prong Assembly PXPA-01500-01 **** PXPA-01875-01 PXPA-02313-01

Prong PXPO-01500-01 PRPO-01710-01 PXPO-01875-01 PXPO-02313-01

Nose PXPN-01500-09 PRPN-01710-09 PXPN-01875-09 PXPN-02313-09

Spacer Rings OSPX-01500-09 OSPR-01710-09 OSPX-01875-09 OSPX-02313-09

Adapter Ring (2) OMPX-01500-

09 (2) OMPR-01710-

09 (2) OMPX-01875-

09 (2) OMPX-02313-

09

Backup Ring (2) OFPX-01500-

09 (2) OFPR-01710-

09 (2) OFPX-01875-

09 (2) OFPX-02313-

09

Vee Packing (12) 91V4792 (12) 91V4007 (12) 91V3308 (13) 91V345


"PX" Plug 2.750" 2.813" 3.813" Assembly PXBT-02750-01 PXBT-02750-01 PXBT-03813-01 Housing PXHO-02750-09 PXHO-02750-09 PXHO-03813-09 Cap ***** ***** ***** Prong Assembly ***** ***** *****

Prong PXPO-02750-01 PXPO-02750-01 PXPO-03813-01

Nose PXPN-02750-09 PXPN-02750-09 PXPN-03813-09

Spacer Rings OSPX-02750-09 OSPX-02750-09 OSPX-03813-09

Adapter Ring (2) OMPX-02750-09 (2) OMPX-02750-09 (2) OMPX-03813-09

Backup Ring (2) OFPX-02750-09 (2) OFPX-02750-09 (2) OFPX-03813-09

Vee Packing (12) 91V347 (12) 91V347 (12) 91V318 Oring -031 N90 -031 N90 *****


RBT / XBT Plugs

The “RBT” Plug is a positive plug used in conjunction with the “BTR” Locking Mandrel to hold pressure from above and below in a type “R” Landing Nipple. This plug can be used to test tubing or to plug tubing while doing repairs to surface equipment. Equalization is achieved by shifting the collet into the open position before the mandrel is unlocked. The “XBT” Plug has the same functionality as the “RBT” Plug, only it is used in conjunction with “BTX” Locks in “X” Nipples.

OPERATIIONAL GUIDLINES - "R" 1.710" 1.781" 1.875" 2.125" 2.188" 2.562"

No Go ID 1.700" 1.770" 1.865" 2.115" 2.175" 2.550" Minimum ID .625" .781" .781" .781" 1.005" 1.190" Thread Connection 1 1/8"-16 1 3/8"-14 1 3/8"-14 1 3/8"-14 1 3/4"-12 2"-12 SLB Eq. Flow Area .049" .028" .028" .028" .049" .041"

OPERATIONAL GUIDLINES = "X" 1.500" 1.625" 1.875" 2.313" 2.750" 2.813"

No Go ID 1.490" 1.615" 1.865" 2.300" 2.740" 2.800" Minimum ID .625" .625" .875" 1.223" 1.630" 1.630" Thread Connection 1 1/8"-16 1 1/8"-16 1 3/8"-14 1 3/4"-12 2 1/4"-12 SLB 2-1/4"-12 SLB Eq. Flow Area .014" .049" .028" .014" .055" .055"


"R" Plug 1.710" 2.125" 2.188" 2.562" "RR" Assembly RRBT-01710-09 RRBT-02125-09 RRBT-02188-09 RRBT-02562-09 Equalizing Sub Assembly RESA-01710-09 RESA-02125-09 RESA-02188-09 RESA-02562-09

Housing RESH-01710-09 RESH-02125-09 RESH-02188-09 RESH-02562-09

Collet RESV-01710-09 RESV-02125-09 RESV-02188-09 RESV-02562-09

Lo-Arc (2) 91M1993 (2) 91M1986 (2) 91M1994 (2) 91M2258 Cap RESC-01710-09 XESC-01875-09 XESC-02313-09 PRPC-02562-09 Oring ***** ***** ***** -030 V90 3.437" 3.688" "RR" Assembly RRBT-03437-09 RRBT-03688-09 Equalizing Sub Assembly RESA-03437-09 RESA-03688-09

Housing RESH-03437-09 RESH-03688-09

Collet RESV-03437-09 RESV-03688-09

Lo-Arc (2) RESS-03437-01 (2) 91M2266 Cap RESC-03437-09 RESC-03688-09 Oring -037 V75 -040 V75


"X" Plug 1.500" 1.625" 1.875" 2.313" "XX" Assembly XXBT-01500-09 XXBT-01625-09 XXBT-01875-09 XXBT-02313-09 Equalizing Sub Assembly XESA-01500-09 XESA-01625-09 XESA-01875-09 XESA-02313-09

Housing XESH-01500-09 XESH-01625-09 XESH-01875-09 XESH-02313-09

Collet XESV-01500-09 XESV-01500-09 XESV-01875-09 XESV-02313-09

Oring -116 V90 -116 V90 -120 N90 -125 N90 Cap RESC-01710-09 RESC-01710-09 XESC-01875-09 XESC-02313-09 2.750" 2.813" 3.813" "XX" Assembly XXBT-02750-09 XXBT-02813-09 XXBT-03813-09 Equalizing Sub Assembly XESA-02750-09 XESA-02813-09 XESA-01875-09

Housing XESH-02750-09 XESH-02813-09 XESH-03813-09

Collet XESV-02750-09 XESV-02750-09 XESV-03813-09

Oring -131 V90 -131 V90 -230 N90 Cap XESC-02750-09 XESC-02750-09 XESC-01875-09 Oring -033 N90 -033 N90 -039 V90


XRBT Pump Thru Plugs

The “XRBT” Pump Thru Plug is used with the “BTX” Lock and an “X” Sub Assembly to hold pressure from below in an “X” Landing Nipple. This plug has pump thru ability, allowing the user to pump fluids into the well.

OPERATIONAL GUIDLINES 2" 2-1/2" 3" Max OD 1.750" 2.00" 2.570" Thread Connection 1 1/8"-16 1 3/8"-14 2 1/4"-12 SLB

2" 2-1/2" 3" "XRBT" Assembly RXNO-01875-01 RXNO-02313-01 RXNO-03000-01 Housing RXNH-01875-01 RXNH-02313-01 RXNH-03000-09 Ball RXNB-01875-01 RXNB-02313-01 RXNH-03000-01 Seat RXNBS-01875-01 RXNBS-02313-01 RXNBS-03000-01 Spring RXNS-01875-08 RXNS-02313-08 RXNS-03000-08 ** Inconnel Springs available upon request


Dual Flapper Pump-Thru

The Dual Flapper Pump Thru Plug is used in snubbing and provides the capacity of eliminating or altering the back pressure valve. This tool can either be run in place or set and pulled via Slickline. Dual flappers offer an efficient replacement of legacy ball checks or dart type floats. The Dual Flapper operates in a standard locking profile

1.875" 2.313"Max OD 1.75 2.125Thread Connection 1 3/8-14 1 3/4-12

OPERATING GUIDE

Single Flapper Configuration is available in the 1.875” sizes.


Dual Flapper Pump Thru

1.710" 1.875" 2.313" Assembly DFPTP-01710-01 DFPTP-01875-01 DFPTP-02313-01 Top Sub DFTS-01710-01 DFTS-01875-01 DFTS-02313-01 Housing DFHO-01710-01 DFHO-01875-01 DFHO-02313-01 Flapper Housing (2) DFFH-01710-01 (2) DFFH-01875-01 (2) DFFH-02313-01 Flapper (2) DFFO-01710-01 (2) DFFO-01875-01 (2) DFFO-02313-01 Seat (2) DFSO-01710-01 (2) DFSO-01875-01 (2) DFSO-02313-01 Seat Seals (2) DFTS-01710-01 (2) DFSS-01875-01 (2) DFSS-02313-01 Springs (2) DFFS-01710-08 (2) DFFS-01875-08 (2) DFFS-02313-08 Oring ***** (2) -120 N90 (2) -125 N90 Oring ***** (3) -122 N90 (3) -128 N90 Flat Backup ***** (2) -122 8-N300-90 (2) -128 8-N300-90 ** Redress Kits also Available


Dual Flapper **New Style 1.500" 1.710"

Assembly DFPTP-11500-01 DFPTP-11710-01 Top Sub DFTS-11500-01 DFTS-11710-01 Housing DFHO-11500-01 DFHO-11710-01 Flapper Housing DFFH-11500-01 DFFH-11710-01 Flapper DFFO-11500-01 DFFO-11710-01 Seat DFFS-11500-01 DFFS-11710-01 Seat Seals DFSS-11500-01 DFSS-11710-01 Springs DFFS-11500-08 DFFS-11710-08 Oring (3) -117 V90 (3) -120 V90

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 C-1

Section III Packoff Equipment


“G” Packoff Assembly

The “G” Packoff is used to seal off holes in the tubing. Tubing Stops are used to keep the packoffs in the locked position. In extenuating circumstances, a packoff can be used as a tubing plug during well completion where landing nipples were not installed.

2" 2-1/2"Upper Connection 1 5/8"-12 2 1/16"-12Lower Connection 1"-10 RD 1 1/2"-10RDMax OD 1.840" 2.275"Min OD 1.063" 1.500"

OPERATING GUIDELINES


"G" Packoff Assembly 2" 2-1/2"

Assembly GPUA-02000-01 GPUA-02500-01 Locking Sleeve GPLS-02000-01 GPLS-02500-01 Lug Segment (3) GPLO-02000-01 (3) GPLO-02500-01 Locking Segment (6) GPLKS-02000-01 (6) GPLKS-02500-01 Element Expander #1 GPEE1-02000-01 GPEE1-02500-01 Element Expander #2 GPEE2-02000-01 GPEE2-02500-01 Mandrel GPMO-02000-01 GPMO-02500-01 Lower Sub GPLSB-02000-01 GPLSB-02500-01 G Packoff Element 2" G Packoff 2-1/2" G Packoff Spacer GPSO-02000-01 GPSO-02500-01 Oring (2) -219 N90 (2) -224 N90 Optional

Fishneck GPFN-02000-01 GPFN-02500-01


“G” Stop Anchor

The “G” Stop Anchor is used with the “G” Packoff Assembly to pack off holes in the tubing. A Bull Plug Nose is also available for the entire assembly.

2" 2-1/2" Assembly GSTOP-02000-01 GSTOP-02500-01 Slip Mandrel GSMO-02000-01 GSMO-02500-01 Slip GSSO-02000-01 GSSO-02500-01 Optional - Bull Nose 2" Bull Plug Body 2-1/2" Bull Plug Body

OPERATING GUIDELINES 2" 2-1/2" Min ID 1.070" 1.500" Fishneck ID 1.390" 1.813" Thread Connection 1 5/8"-12 2 1/16"-12 Max OD 1.835" 2.275" Pulling Tool GSPT-02000-01 GSPT-02500-01 Shear Pin 3/16" X 1/4" 3/16" X 1/4"


“F” Collar Stop

The “F” Collar Stop locates in the recess of API upset and non-upset tubing. The stop is lowered to the required depth, and then lifted upward, tripping the latch springs, allowing the stop arms to engage the collar recess. Jarring downward locks the arms into place. B&T also manufactures special F Collar Stops with threaded ends to connect to different pieces of tool string.

2" 2-1/2" 3"Min ID .875" 1.125" 1.688"Fishneck OD 1.375" 1.750" 2.313"Pulling Tool JDCBT-02000-01 JDCBT-02500-01 JDCBT-03000-01



"F" Collar Stop 2-1/2" 3"

Assembly 2" F Collar Stop 2-1/2" F Collar Stop 3" F Collar Stop Arms FCSA-02000-01 FCSA-02500-01 FCSA-03000-01 Mandrel Body FCSB-02000-01 FCSB-02500-01 FCSB-03000-01 Nut FCSN-02000-01 FCSN-02500-01 FCSN-03000-01 Spring (2) 2" F Collar Springs (2) 2-1/2" F Collar Springs (2) 3" F Collar Springs ** 2-1/2" Also Available with 1-3/8" Fishneck


“F” Collar Stop Running Tool

The “F” Collar Stop Running Tool is used to set the “F” Collar Stop.

2",2-1/2" 3"Fishneck OD 1.375" 1.750"Pin Connection 15/16"-10 15/16"-10

Max OD 1.500" 2.000"

Steel Pin2": 1/4" X 1 3/16" 2-1/2": 1/4" X 1 1/2" 1/4" X 2"


Size 2", 2-1/2" 3" Part Number 2-1/2" F Collar Stop Running Tool 3" F Collar Stop Running Tool


“A” Tubing Stop

The “A” Tubing Stop is designed for use in integral joint tubing strings where a coupling recess is not available. It is used primarily as an anchoring device in packoff applications.

2" 2-1/2" 3"Min ID .703" 1.047" 1.500"Fishneck OD 1.375" 1.750" 2.313"Max OD 1.750" 2.188" 2.719"Running Tool JDCBT-02000-01 JDCBT-02500-01 JDCBT-03000-01Pulling Tool JDCBT-02000-01 JDCBT-02500-01 JDCBT-03000-01Shear Pin Size 3/16" 1/8" 3/16"


2-1/2" (8.7#) 2-1/2" (7.9#)Min ID .703" .703"Fishneck OD 1.375" 1.375"Max OD 2.078" 2.125"Running Tool JDCBT-02000-01 JDCBT-02000-01Pulling Tool JDCBT-02000-01 JDCBT-02000-01Shear Pin Size 3/16" 3/16"



"A" Tubing Stop 2" 2-1/2" 3"

Assembly TATS-02000-05 TATS-02500-05 TATS-03000-05 Slip (3) TASS-02000-05 (3) TASS-02500-05 (3) TASS-03000-05 Slip Carrier TASC-02000-05 TASC-02500-05 TASC-03000-05 Mandrel TASM-02000-05 TASM-02500-05 TASM-03000-05 Ring TATB-02000-05 TATB-02500-05 TATB-03000-05

2-1/2" (8.7#) 2-1/2" (7.9#) Assembly TATS-02870-05 TATS-02790-05 Slip (3) TSSO-02870-01 (3) TSSO-02790-01 Slip Carrier TASC-02000-05 TASC-02500-05 Mandrel TASM-02000-05 TASM-02500-05 Ring TATB-02000-05 TATB-02500-05


“A-1” Tubing Stop

The “A-1” Tubing Stop is similar to the “A” Tubing Stop, except the “A-1” Tubing Stop has an internal fishneck.

2" 2-1/2" 3"Min ID 1.047" 1.047" 1.500"Fishneck ID 1.57" 2.00" 2.50"Max OD Slips Retracted 1.859" 2.281" 2.719"Max OD Slips Expanded 2.063" 2.531" 3.093"

Running Tool GSPT-02000-01 GSPT-02500-01 GSPT-03000-01Pulling Tool GSPT-02000-01 GSPT-02500-01 GSPT-03000-01

Shear Pin Size 3/16" 1/8" 3/16"



"A-1" Tubing Stop 2" 2-1/2" 3"

Assembly TATS-12000-05 TATS-12500-05 TATS-13000-05 Slip (3) TASS-02000-05 (3) TASS-02500-05 (3) TASS-03000-05 Slip Carrier TASC-02000-05 TASC-02500-05 TASC-03000-05 Mandrel TASM-12000-05 TASM-12500-05 TASM-13000-05 Band TATB-02000-05 TATB-02500-05 TATB-03000-05 ** Heavy Duty Slips Available in Certain Sizes


“AD2” Tubing Stop

The “AD2” Tubing Stop is designed for use in integral joint tubing strings where a coupling recess is not available. It is used primarily as an anchoring device in packoff applications.


"AD2" Tubing Stop 2-1/2" 3"

Assembly AD2TS-02500-01 AD2TS-03000-01 Slip (3) AD2S-02500-01 (3) AD2S-03000-01 Housing AD2H-02500-01 AD2H-03000-01 Mandrel AD2M-02500-01 AD2M-03000-01 Band AD2B-02500-01 AD2B-03000-01 Nut AD2N-02500-01 AD2N-03000-01

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 D-1

Section IV Surface

Equipment


Veeder Root Counter

Right Angle Drives

Wireline Clamps

The Veeder Root Counter is attached to the counter head or it can be adapted through a remote cable. It calculates the depth of the tool string during wireline operations, as the wire is lowered downhole. The counter is available with readings in meters or feet. B & T also repairs used Veeder Root Counters.

Standard NewStandard Adapted for RemoteMetricMetric for RemoteVeeder Root Repair

2:1 Ratio1:1 Ratio1:2 Ratio

A right angle drive allows the operator to separate the Veeder Root Counter from the Counter Head. The right angle drive can also be used to change the ratio between the counter head and the Veeder Root Counter.

.092 to .187 Wireline Clamp

.218 + Wireline Clamp

The Wireline Clamp is a grip designed for use with bare wire. The clamp can be used to manually work the wire or to “clamp” it during other applications. B & T offers a standard clamp as well as a heavy-duty version for braided line.


Hay Pulleys

The Hay Pulley is used to alter the position of the wireline from perpendicular to horizontal with the wireline unit from the stuffing box. It reduces the side pull force to the lubricator string. B & T also offers a 16” Aluminum hay pulley, as well as a 12” & 7” hay pulley.

Bar Clamp


Counter Wheel

Pressure Wheel

The Counter Wheel is a replacement part for the measuring head. Line sizes can be specified from .092” and up.

The pressure wheel is also a replacement part for the measuring head. Line sizes are available from .092” and up.


Measuring Head Assembly

B&T now manufactures the entire measuring head assembly including both the 8” and 16” styles. We have all the replacement parts necessary to repair any measuring head as well. In addition B&T can assemble your measuring for .092 to .125 wire and it can be adapted for cable drive or direct drive.


Tree Connections

Tree Connections are used to connect the bottom of the wireline valve to the connection at the top of the tree.

Part Number Description TCBT-02000-01 2" Reg Pin X 2-1/2" Threaded Half

TCBT-02375-01 2-3/8" 8RD X 2-1/2" Threaded Half

TCBT-02875-01 2-7/8" 8RD X 2-1/2" Threaded Half

TCBT-03000-01 3" 8RD Pin X 2-1/2" Threaded Half


Quick Unions

Quick Unions are used along with Pup Joints to form the Lubricator Assembly. Pressure is maintained by the Oring. ** B & T can also supply Pup Joints.


Quick Unions 4 3/4"-4 X 2-3/8" EU 4 3/4"-4 X 2-7/8" EU 5"-4 X 2 3/8" EU

Nut QUNOO-2.501-00 QUNOO-2.501-00 5 X 4 X 2-7/8 EU Nut

Threaded

Half QUTH-02375-01 QUTH-02.508-00 5 X 4 Otis Threaded Half

Pin Section QUPS-02375-01 QUPS-02.503.00 5 X 4 Otis Pin Section

Oring -340 N90 -340 N90 -345 N90

5"-4 X 2-7/8" EU 5"-4 X 3-1/2" EU

Nut 5 X 4 X 2-7/8 EU Nut 5 X 4 X 2-7/8 EU Nut

Threaded

Half 5 X 4 X 2-7/8 Threaded Half 5 X 4 X 3-1/2 Threaded Half

Pin Section 5 X 4 X 2-7/8 Pin Section 5 X 4 X 3-1/2 Pin Section

Oring -345 N90 -345 N90


Hydraulic Packing Nut

The Hydraulic Packing Nut allows the remote operation of the packing nut assembly, for convenience and safety. In addition to the model pictured, we also provide different glands, including the set screw and screw-in types.

Hydraulic Packing Nut Part Number Piston Plunger Body Body Bottom Sub Bottom Sun Upper Gland 54882/001 ** Spring Spring Oring -222 N90 Oring -210 N90 Set Screw (Optional) 1/4"-20 X 1/4" *** Glands available in set screw and screw in typeas well as different line sizes.


Staff Assemblies Stuffing Boxes

B & T Oilfield Products can also provide your company with Stuffing Box Assemblies, manual or 5000psi - 10000psi hydraulic, as well as the entire Staff Assembly. B & T will customize your Staff Assembly according to your specifications, including any type of Stuffing Box Packing, any type of Glands and the wheel size of your choice. In addition B&T also offers the manual stuffing box nut.


Stuffing Box Glands

Upper Gland Set Screw Type

Upper Gland Thread Type

Flow Tube Insert

Large OD Hydraulic Packing Nut Sleeve

Small OD Hydraulic Packing Nut Sleeve

Hydrolex Upper Gland

Ported Hex Head Gland

Lower Gland Lower Gland Elmar


Stuffing Box Glands Part Number Line Size Description

PHHD-0092-01 0.092 Ported Hex Head Glands

PHHD-0108-01 0.108

PHHD-0125-01 0.125

HPNS-0092-02 0.092 Big OD Hydraulic Packing Nut Sleeves

HPNS-0108-02 0.108

HPNS-0125-02 0.125

HPNS-0092-01 0.092 Small OD Hydraulic Packing Nut Sleeves

HPNS-0108-01 0.108

HPNS-0125-01 0.125

36018/204 0.108 Lower Gland for Elmar Stuffing Box

36018/205 0.125

36018/206 0.150

Flow Tube Insert 0.092 Flow Tube Inserts

0.108

0.125

36018/003 0.092 Lower Gland for Stuffing Box Packing

36018/004 0.108 Aluminum Bronze Material

36018/005 0.125

54882/113 0.092 Upper Gland Threaded Style

54882/114 0.108 Steel Material

54882/003 0.092 Upper Gland Set Screw Type

54882/004 0.108 Brass Material

54882/005 0.125

54882/202 0.092 Hydrolex Upper Gland for Manual Stuffing Box

54882/203 0.108

54882/204 0.125

54882/123 0.092 Upper Gland Threaded Style

54882/124 0.108 Brass Material

54882/125 0.125


“BTX/BTXN” Landing Nipples

“BTX” Landing Nipples are fully selective nipples used to land, lock, and seal “BTX” Locks with attached flow control devices in the production tubing string. The internal profile includes a selective profile, a locking recess, and a polished bore.

“BTXN” Landing Nipples includes a lower no-go shoulder, which engages the no-go of the “BTXN” Locking Mandrel, a locking recess, and a polished bore. It is normally used as the lowest landing nipple in a completion.

Part Number Description

OXNO-01875-09 1.875 X Nipple (Pin X Pin)

OXNN-01875-09 1.875 XN Nipple (Pin X Pin)

OXNO-11875-09 1.875 X Nipple (Box X Pin)

OXNN-11875-09 1.875 XN Nipple (Box X Pin)

Part Number Description Part Number Description

OXNO-02313-09 2.313 X Nipple (Pin X Pin) OXNO-12313-09 2.313 X Nipple (Box X Pin)

OXNN-02313-09

2.313 XN Nipple (Pin X

Pin) OXNN-12313-09 2.313 XN Nipple (Box X Pin)

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 E-1

Section V Fishing Tools


2-Prong Wireline Grab




Wireline Grab

2-prong 3-prong 4-prong 1-1/4" WGBT-01250-01 ***** ***** 1-1/2" WGBT-01500-01 WGBT-31500-01 WGBT-41500-01 2" WGBT-01750-01 WGBT-31750-01 WGBT-41750-01 2-1/2" WGBT-02250-01 WGBT-32250-01 WGBT-42250-01 3" WGBT-03000-01 WGBT-33000-01 WGBT-43000-01 3-1/2" WGBT-03500-01 ***** ***** 4" WGBT-04000-01 ***** ***** 4-1/2" WGBT-04500-01 ***** ***** ** Other Sizes also available

OPERATING GUIDLINES 1-1/4" 1-1/2" 2" 2-1/2" 3"

Fishneck OD 1.000" 1.188" 1.375" 1.375" 1.750" Max OD 1.230" 1.490" 1.750" 2.250" 2.625" Pin Connection 5/8"-11 15/16"-10 15/16"-10 15/16"-10 1 1/16"-10 Made Up Length 23.875" 23.938" 23.938" 25.250" 24.500"


Center Spear

The center spear is generally used to help remove slickline snarls stuck in the tubing. It is driven into to the tangle to loosen up it up for wire grab removal.

2" 2-1/2"Fishneck OD 1.188" 1.188"Pin Connection 15/16"-10 15/16"-10Made Up Length 22.000" 22.000"


Size 2" 2-1/2"Part Number Center Spear 2-1/2" Center Spear


Wirefinder

The Wirefinder with Top Sub is used to bend or ball the uppermost part of the wire so that retrieving applications may be used.

Sizes Part Number 2" WFSS-02000-01 2-1/2" WFSS-02500-01 3" WFSS-03000-01 Top Sub Top Sub w/ Ctr Mandrel ** Several other special size split skirts are also available


2”-3” Wire Retriever

The Wireline Retriever is designed to retrieve broken or cut slickline from the tubing. It locates and balls the broken wire with the aid of a split skirt. Pulling up traps the broken line within the tool with the use of the wedges.

2"-3"Fishneck OD 1.375"Max OD 1.813"Pin Connection 15/16"-10Made Up Length 29.938"



2"-3" Wire Retriever Description Part Number

2"-3" Wire Retriever Assembly WRBT-02000-01 Fishneck WRFN-02000-01 Inner Mandrel WRIM-02000-01 Sub WRSO-02000-01 Spear Point WRSP-02000-01 Skirt Body WRSB-02000-01 Slip WRSL-02000-01 Slip Retainer Ring WRRR-02000-01


Paraffin Scratcher

The Paraffin Scratcher is designed to scratch paraffin and scale from the ID of tubing by packing pieces of wireline, cut to specific lengths and threaded through a number of spirally drilled holes, along it 5/8” diameter body and running it up and down inside the tubing.


Rare Earth Magnet

The Rare Earth Magnet is used to remove metal particles and debris from the tubing, which may impede normal wireline operations and prevent tools from functioning properly. Very powerful magnets are enclosed within the tool, and care should be taken to prevent damage to electronic equipment, and to prevent inadvertent fowling with ferrous materials in your shop.

1.500" 1.750" 2.250"Fishneck OD 1.188" 1.375" 1.375"Max OD 1.500" 1.750" 2.250"Pin Connection 15/16"-10 15/16"-10 15/16"-10Made Up Length 6.375" 6.375" 6.375"



Rare Earth Magnet

1.500" 1.750" 2.250" Assembly REMA-01500-01 REMA-01750-01 REMA-02250-01 Top Sub REMTS-01500-01 REMTS-01750-01 REMTS-02250-01 Bottom Sub REMBS-01500-01 REMBS-01750-01 REMTS-02250-01 Shim REMS-01500-01 REMS-01750-01 REMS-02250-01 Magnet 1-1/8" Magnet 1-3/8" Magnet 1-3/4" Magnet **Other sizes also available.

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 F-1

Section VI Tool String Equipment


Single Strand Rope Socket

The Single Strand Rope Socket is used to attach single strand wireline with the wireline tool string. It is recommended for use with .072 - .125 line.

OPERATING GUIDLINES 1" 1-1/4" 1-1/2" 1-3/4" 1-7/8" Fishneck OD 1.000" 1.188" 1.375" 1.750" 1.750" Max OD 1.000" 1.250" 1.500" 1.750" 1.875" Thread Connection 5/8"-11 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10 Length 5.688" 6.188" 6.188" 7.000" 7.000"


Single Strand Rope Socket 1" 1-1/4" 1-1/2"

Assembly 1" Rope Socket 1-1/4" Rope Socket 1-1/2" Rope Socket Body ***** RSBO-1250-01 RSBO-1500-01 Spring ***** SSSO-00108-01 SSSO-00108-01 Spool ***** RSSO-00108-01 RSSO-00108-01 Thimble ***** RSTO-00108-01 RSTO-00108-01 1-3/4" 1-7/8" Assembly 1-3/4" Rope Socket 1-7/8" Rope Socket Body RSBO-01750-01 RSBO-01875-01 Spring SSSO-00108-01 SSSO-00108-01 Spool RSSO-00108-01 RSSO-00108-01 Thimble RSTO-00108-01 RSTO-00108-01


Multi-Strand Rope Socket

The Multi-Strand Rope Socket is the means used to attach multi-strand lines with the wireline tool string. The slip type rope socket is used with small lines up to 7/32”.

OPERATING GUIDLINES 1-1/4" 1-1/2" 1-3/4" Fishneck OD 1.188" 1.375" 1.750" Max OD 1.250" 1.500" 1.750" Thread Connection 15/16"-10 15/16"-10 1 1/16"-10 Overall Length 8.750" 9.000" 9.188" Set Screw 3/8"-16 X 5/16" 3/8"-16 X 5/16" 3/8"-16 X 5/16"


Multi-Strand Rope Socket 1-1/4" 1-1/2" 1-3/4"

Assembly 1-1/4" Mulistrand Rope

Socket 1-1/2" Multistrand Rope

Socket 1-3/4" Multistrand Rope

Socket Body MSRSB-01250-01 MSRSB-01500-01 MSRSB-01750-01 Lower Sub MSRSLS-01250-01 MSRSLS-01500-01 MSRSLS-01750-01 Plug MSRSP-01250-01 MSRSP-01500-01 MSRSP-01500-01 Slip MSRSS-01250-01 MSRSS-01500-01 MSRSS-01500-01


No Knot Rope Socket

The No Knot Rope Socket is used to connect the wireline to the wireline tool string. The line is run through the body and sleeve, with the line set in the groove of the wedge. The line is set when the brass wedge is pulled tightly into the sleeve.

1-1/4" 1-1/2" 1-3/4" 1-7/8"Fishneck OD 1.188" 1.375" 1.750" 1.750"Max OD 1.250" 1.500" 1.750" 1.875"Thread Connection 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10Overall Length 5.56" 5.56" 5.56" 5.56"



No Knot Rope Socket 1-1/4" 1-1/2" 1-3/4" 1-7/8"

Assembly 1-1/4 Rope Socket

(No Knot) 1-1/2 Rope Socket



(No Knot) Body RSBO-01250-01 RSBO-01500-01 RSBO-01750-01 RSBO-01875-01 Brass Wedge RSBW-00108-01 RSBW-00108-01 RSBW-00108-01 RSBW-00108-01 Sleeve RSSL-00108-01 RSSL-00108-01 RSSL-00108-01 RSSL-00108-01 ** Sizes also available for .125" Wire


STEM

Stem is used to add weight to the tool string to counteract wellbore pressure allowing easy descent of the tool string. It is also used to increase the jarring effect of link jars and tubular jars.


STEM Size 2' 3' 5' 3/4" STEM-0750X2-00 STEM-0750X3-00 STEM-0750X5-00 1" STEM-0100X2-00 STEM-0100X3-00 STEM-0100X5-00 1-1/4" STEM-0125X2-00 STEM-0125X3-00 STEM-0125X5-00 1-1/2" STEM-0150X2-00 STEM-0150X3-00 STEM-0150X5-00 1-3/4" STEM-0175X2-00 STEM-0175X3-00 STEM-0175X5-00 1-7/8" STEM-0187X2-00 STEM-0187X3-00 STEM-0187X5-00 2-1/8" STEM-2125X2-00 STEM-2125-3-00 STEM-2125X5-00


Leaded Stem

Leaded Stem adds extra weight per piece due to the increased density of the lead core.


Leaded STEM Size 2' 3' 5' 1-1/4" LSBT-125X2-00 LSBT-125X3-00 LSBT-125X5-00 1-1/2" LSBT-150X2-00 LSBT-150X3-00 LSBT-150X5-00 1-3/4" LSBT-175X2-00 LSBT-175X3-00 LSBT-175X5-00 1-7/8" LSBT-187X2-00 LSBT-187X3-00 LSBT-187X5-00


Roller Stem

Roller Stem is used to provide extra weight to the wireline tool string. In addition the rollers allow the stem to move easier through deviated tubing. B&T can also manufacture rollers of different sizes for each size of stem in addition to the standard rollers.

Length 3' 5'

Size

1 1/4" RSBT-31250-01 RSBT-51250-01

1 1/2" RSBT-31500-01 RSBT-51500-01

1 3/4" RSBT-31750-01 RSBT-51750-01


Knuckle Joint

The Knuckle Joint is designed for applications where tool string rotation or deflection is required. It is most useful in fishing applications to properly locate the fish.

SPECIFICATIONS 3/4" 7/8" 1" 1 1/4" Fishneck OD .688" .688" 1.000" 1.188" Max OD .750" .875" 1.000" 1.250"

Pin & Box Connections

1/2"-13 1/2"-13 5/8"-11 15/16"-

10

Made Up Length

4.438" 4.438" 5.250" 7.313"

1 1/2" 1 3/4" 1 7/8" 2 1/8" Fishneck OD 1.375" 1.750" 1.750" 1.750" Max OD 1.500" 1.750" 1.875" 2.125"

Pin & Box Connections

15/16"-10

1 1/16"-10

1 1/16"-10

1 1/16"-10

Made Up Length

9.000" 9.125" 9.125" 9.125"


Knuckle Joint Size 1" 1-1/4" 1-1/2" Part Number 1" Knuckle Joint 1-1/4" Knuckle Joint 1-1/2" Knuckle Joint Size 1-3/4" 1-7/8" Part Number 1-3/4" Knuckle Joint 1-7/8" Knuckle Joint

Hydraulic Oil Jar The Hydraulic Wireline Jar is designed to give the operator control over intensity during jarring. This is done by resetting the jar f ollowing each cycle. Size 1-1/4" 1-1/2" 1-3/4" 2-1/8" Part Number HOJBT-01250-01 HOJBT-01500-01 HOJBT-01750-01 ***** Oring Kit 11754 11191 79327 11553

Knuckle Jar The Knuckle Jar provides a range of motion that hel ps to make the tool string more flexible. It also can be used for light jarring. Size 1-1/4" 1-1/2" 1-3/4" 1-7/8" Part Number KNJA-01250-01 KNJA-01500-01 KNJA-01750-01 KNJA-01875-01


Link Jars

OPERATING GUIDLINES 1" 1-1/4" 1-1/2" 1-3/4" 1-7/8" 2-1/8" 2-1/2"

Fishneck OD 1.000" 1.188" 1.375" 1.750" 1.750" 1.750" 2.313" Max OD 1.000" 1.250" 1.500" 1.750" 1.875" 2.125" 2.500" Connections 5/8"-11 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10 1 1/16"-10 1 9/16"-10

14" 32.250" ***** ***** ***** ***** ***** ***** 18" 32.250" ***** ***** ***** ***** ***** ***** 20" ***** 43.000" 43.000" 43.000" 50.000" 50.000" 50.000"

Made Up Length

(Closed) 30" ***** 56.000" 56.000" 56.000" 56.000" 56.000" 56.000" 14" 53.000" ***** ***** ***** ***** ***** ***** 18" 57.000" ***** ***** ***** ***** ***** ***** 20" ***** 63.000" 63.000" 63.000" 70.000" 70.000" 70.000"

Made Up Length (Open)

30" ***** 86.000" 86.000" 86.000" 86.000" 86.000" 86.000"

The Link Jar provides upward and downward impact in order to operate certain wireline tools. The intensity is dependent upon the weight of the stem above it, the stroke of the jar, and the density of the well fluid.


Link Jars Stroke 14" 18" 20" 30" Size 1" 1" X 14" Link Jar 1" X 18" Link Jar ***** ***** 1-1/4" ***** ***** 1-1/4 X 20 Link Jar 1-1/4 X 30 Link Jar 1-1/2" ***** ***** 1-1/2 X 20 Link Jar 1-1/2 X 30 Link Jar 1-3/4" ***** ***** 1-3/4 X 20 Link Jar 1-3/4 X 30 Link Jar 1-7/8" ***** ***** 1-7/8 X 20 Link Jar 1-7/8 X 30 Link Jar 2-1/8" ***** ***** 2-1/8 X 20 Link Jar 2-1/8 X 30 Link Jar 2-1/2" ***** ***** 2-1/2 X 20 Link Jar 2-1/2 X 30 Link Jar


Tubular Jar

The Tubular Jar performs the same function as the Link Jar. The holes in the body of the jar allow fluid bypass, reducing the effects of the well fluid on jarring impact.

1-1/4" 1-1/2" 1-3/4" 1-7/8"Fishneck OD 1.188" 1.375" 1.750" 1.750"Max OD 1.250" 1.500" 1.750" 1.875"Connections 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10Length (Closed) 32.563" 32.563" 32.563" 32.563"Length (Open) 52.563" 52.563" 52.563" 52.563"


** 30” Stroke Tubular Jars are also available.


Crossovers

Pin X Pin Crossover

Sucker Rod Crossover Subs B & T carries most types of Sucker Rod Connections Crossovers on its shelves, including Amerada Boxes and Pins. We also carry Sucker Rod Thread Chasers.

Special Crossover B & T will also build special crossovers for pipe threads, including but not limited to EUE connections for landing nipples. Call and ask for specifics.*

Pin X Box Crossover

The crossover sub is used to connect components of the tool string that have different size thread connections.


Blind Box

The Blind Box is a single piece tool designed to deliver “blows”, much like a hammer, to downhole objects. B & T has many stock sizes available and can turn any in-stock OD to a custom OD of your choosing. The part number for the B & T Blind Box is BBBT-0SIZE-01, where SIZE is replaced with the OD of your choice. Fishneck and Thread Connections are consistent with normal wireline standards.


Tubing Swedge

The Tubing Swedge is used to forcibly straighten irregular places and other obstructions within the tubing string. It has angled fluid ports for bypass. The B & T Tubing Swedge can be turned to a specific OD of your choosing. The thread connections and fishnecks are consistent with common wireline tools.


Ring Gauges

The Ring Gauge can be used to calibrate tubing and locate landing nipples. Its main purpose is to remove paraffin and other deposits from the tubing wall. The B & T Ring Gauge can be turned to any specific OD. The thread connections and fishneck are consistent with common wireline standards. The part number for the B & T Ring Gauge is RGBT-0SIZE-01 where SIZE is the maximum OD of the Gauge.


Impression Block

The Impression Block is a steel housing with a Lead Core. It is used to make an impression of the size, shape, and position of an object to be fished.

Sizes Available 1” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4” 1-7/8” 2” 2-1/2” 3” ** Larger sizes available upon request


Broaches

Tubing Broach

Pineapple Broach

Paddle Broach


Tubing Broach

The Broach is used to cut burrs in the tubing ID caused by perforation, rust, bent tubing, etc…

1-1/2" 2" 2-1/2" 3"Fishneck OD 1.188" 1.375" 1.375" 1.750"Pin Connection 15/16"-10 15/16"-11 15/16"-12 1 1/16"-10Made Up Length 11.500" 11.500" 11.500" 11.500"


The B & T Broach is manufactured in many precision sizes, as well varying lengths. The part number for the Tubing Broach is TBBT-0SIZE-01 where size is the size of the largest OD. Example: A 2.443 OD Broach would be TBBT-02443-01 The Pineapple Broach part number is PBBT-0SIZE-01 where SIZE is the largest OD of the tool. B & T also manufactures PBBT-1SIZE-01 where SIZE is the largest OD as well as the OD of the first 2 rings on the broach. Example: A 1.910 OD Broach would be PBBT-01910-01 The Paddle Broach part number is simply the size followed by the words Paddle Broach. Example: A 2.500 OD Broach would 2.500” Paddle Broach


Adjustable Bow Spring Centralizer

Go Devil

Through the use of the adjustable nut, the bow spring centralizer can adjust to any OD ranging from 1-1/2” to 8-1/2” OD. It is used to keep the tool string located in the center of the tubing.

Fishneck OD 1.375"Connections 15/16"-10Range 1.500" to 8.500"Made Up Length 45.750"


Assembly Adjustable Bow Spring Centralizer Top Sub BSCTS-01500-01 Spring Carrier BSCSC-01500-01 Spring Retainer BSCSR-01500-01 Bottom Sub BSCBS-01500-01 Mandrel BSCM-01500-01 Adjusting Nut BSCAN-01500-01 Bow Spring Bow Spring Coil Spring JDCS-02000-01


Go Devil

Mule Shoe

Deer Foot

The Go Devil is dropped to cut the wireline at the rope socket when the tool string becomes stuck.

Size 3' 5' 1-1/4"

Mule Shoe GDBT-125X3-01 GDBT-125X5-01 Deer Foot GDBT-125X3-02 GDBT-125X5-02

1-1/2"


1-7/8"



Anti-Blow Up Tool

The Anti-Blow Up Tool is installed in the tool string above the BHP equipment. The weight of the BHP equipment will keep the dogs retracted. If a sudden surge of pressure were to occur below the tool string, the BHP equipment would move upward, releasing the dogs outward. The dogs would then engage the inner tubing wall and preventing the tool string from being blown up the tubing.


Nipple Locator

1.875 2.313 Assembly NLABT-01875-01 NLABT-02313-01 Top Sub NLTS-01875-01 NLTS-02313-01 Bottom Sub NLBS-01875-01 NLBS-02313-01 Collet NLCO-01875-01 NLCO-02313-01

2.750 2.813

Assembly NLABT-02750-01 NLABT-02813-01

Top Sub NLTS-02813-01 NLTS-02813-01

Collet BDCO-02750-01 BDCO-02813-01


2 Step Chisel

The 2 Step Chisel is used to clear large masses of scale and built up debris downhole. B &T manufactures several sizes from 1 ¾” to 2 ¾”.


Accelerator

The Accelerator is used to provide spring loaded jarring action downhole.

Part Number Assembly 1-1/2" Accelerator Barrel ABO-01500-01 Bottom Sub ABS-01500-01 Lower Sub ALS-01500-01 Piston APO-01500-01 Spring ASO-01500-01 Top Sub ATS-01500-01


Shock Absorber

The Shock Absorber is used to protect pressure and temperature recording equipment from the jarring action resulting from setting and retrieving the accompanying locking mandrel. The Shock Absorber has two separate springs which receive both upward and downward jarring shock.

SPECIFICATIONS 1-1/2" 1-3/4" 1-7/8"

Fishneck OD 1.375 1.750 1.750 Max OD 1.500 1.750 1.875 Pin Connection 15/16"-10 1 1/16"-10 1 1/16"-10 Box Connection 15/16"-10 1 1/16"-10 1 1/16"-10 Made UP Length 24 24.25 24.25


Shock Absorber 1-1/2" 1-3/4" 1-7/8" Assembly SABT-01500-01 SABT-01750-01 SABT-01875-01 Spring (2) JDCS-01250-01 (2) JDCS-02000-01 (2) JDCS-02000-01 Body SABO-01500-01 SABO-01750-01 SABO-01875-01 Bottom Sub SABS-01500-01 SABS-01750-01 SABS-01875-01 Lower Stop SALS-01500-01 SALS-01750-01 SALS-01875-01 Rod Cap SARC-01500-01 SARC-01750-01 SARC-01750-01 Rod SARO-01500-01 SARO-01750-01 SARO-01750-01


Star Drills

Star Drills are used similarly to broaches, to clean up excess scale and deposits within the well. B & T can manufacture most any size of star drill. The part can be describes as SDBT-0SIZE-01 where SIZE is the size of the star drill that you want. EXAMPLE: 1.850 Star Drill SDBT-01850-01


Tubing Centralizer

The tubing centralizer is used to help keep the tool string in the center of the tubing. The diameter is machined near the tubing drift specifications. Fluid bypass slots are machined to assist the tool string down hole. B & T can manufacture almost any size that you need. The part number would be TCBT-0SIZE-01 where SIZE is the size of the OD that you need. EXAMPLE : A 1.850 Tubing Centralizer would be TCBT-01850-01


Swivel Joints

The Swivel Joint is designed to assist in the changing of components in the wireline tool string. The swivel design allows the operator to change our long sections without having to physically rotate them. The swivel joint also allows the tool string to more freely spin and rotate down hole to prevent line twist.

SPECIFICATIONS 1-1/4" 1-1/2" 1-3/4" 1-7/8" 2-1/8"

Fishneck OD 1.187 1.375 1.75 1.75 1.75 Max OD 1.25 1.5 1.75 1.875 2.125 Pin & Box 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10 1 1/16"-10


Swivel Joint 1-1/4" 1-1/2" 1-3/4" 1-7/8" Assembly SWBT-01250-01 SWBT-01500-01 SWBT-01750-01 SWBT-01875-01 Bearing SJBB-01250-01 SJBB-01500-01 SJBB-01750-01 SJBB-01750-01 Bottom Sub SJBS-01250-01 SJBS-01500-01 SJBS-01750-01 SJBS-01875-01 Fishneck SJFN-01250-01 SJFN-01500-01 SJFN-01750-01 SJFN-01875-01 Housing SJHO-01250-01 SJHO-01500-01 SJHO-01750-01 SJHO-01875-01 Seal SJSS-01250-01 SJSS-01500-01 SJSS-01750-01 SJSS-01750-01 2-1/8" Assembly SWBT-02125-01 Bearing SJBB-01750-01 Bottom Sub SJBS-02125-01 Fishneck SJFN-02125-01 Housing SJHO-02125-01 Seal SJSS-01750-01


Quick Lock

The Quick Lock is designed to provide the operator with a fast but safe means of changing over tools without the use of wrenches. Through the use of a spring loaded slide, the halves are easily released or secured together.

1.500" Assembly QLBT-01500-01 Top Sub QLTS-01500-01 Bottom Sub QLBS-01500-01 Key QLKO-01500-01 Spring QLSP-01500-01


Aluminum DummyAn Aluminum Dummy can be used to ensure downhole clearance or can be used as a spacer in a wireline tool string assembly.


Mechanical Perforator

B&T now has mechanical perforators in stock. These have reduced costs and reduced rig times by eliminating explosives and other equipment. It is also much simpler to use.

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 G-1

Section VII Running Tools


“C-1” Running Tool

The “C-1” Running Tool is designed for use with most Baker Style locks and plugs.

1-1/2" 2" 2-1/2"Fishneck OD 1.188" 1.375" 1.750"Connection 15/16"-10 15/16"-10 15/16"-10Made Up Length 5.875" 6.250" 5.875"Set Screw 1/4"-20 X 3/8" 1/4"-20 X 3/8" 1/4"-20 X 3/8"Shear Pins 1/8" X 1 3/8" 3/16" X 1 11/16" 3/16" X 2-1/8"



"C-1" Running Tool 1-1/2" 2" 2-1/2"

Assembly C1RTA-01500-01 C1RTA-02000-01 C1RTA-02500-01

Body C1RT-01500-01 C1RT-02000-01 C1RT-02500-01 No Go Rings 1.430 BCLR-01430-01 1.780 BCLR-01780-01 2.250 BCLR-02250-01 1.500 BCLR-01500-01 1.810 BCLR-01810-01 2.310 BCLR-02310-01 1.560 BCLR-01560-01 1.870 BCLR-01870-01 1.620 BCLR-01620-01 Thread Protector C1TP-01500-01 C1TP-02000-01 C1TP-02500-01

3" Assembly C1RTA-03000-01 Body C1RT-03000-01 No Go Rings 2.750 BCLR-02750-01 2.810 BCLR-02810-01 Thread Protector C1TP-03000-01


D Running Tool

The D Running Tool is used to run the D Lock and DD Bridge Plug.


Fishneck OD 1.375 1.750 Pin Connection 15/16"-10 15/16"-10 Max OD 1.340 1.750 Length 12.500 12.906 Shear Pin 1/4"X 1 3/16" 1/4" X 1 5/8" Set Screw 1/4"-20 X 1/4" 1/4"-20 X 1/4"


D Running Tool 2" 2-1/2" Assembly DRTBT-02000-01 DRTBT-02500-01 Core DRTC-02000-01 DRTC-02500-01 Fishneck DRTF-02000-01 DRTF-02500-01 Housing DRTH-02000-01 DRTH-02500-01 Collet DRTHC-02000-01 DRTHC-02500-01 Shar Pin Cover DRTSC-02000-01 DRTSC-02500-01


JL Running Tool

The JL Running Tool is used to run and set the S Lock Mandrel.


Fishneck OD 1.375 1.375 Pin Connection 15/16"-10 15/16"-10 Box Connection 1/2"-13 1/2"-13 Max OD 1.625 2.125 Length 3.688 3.688

Shear Pins 3/16" X 1

9/16' 3/16" X 2

1/16"

Size Part Number 2" JLRT-02000-01 2-1/2" JLRT-02500-01


“JC-3” Running Tool

The “JC-3” Running Tool is used to run the “R” or “RA” Type Latch in the appropriate “MM” Series Mandrel.

Regular LongFishneck OD 1.375" 1.375"Connection 15/16"-10 15/16"-11Length 6.188" 12.000"Shear Pins 3/16" X 1 5/8" 3/16" X 1 5/8"Max OD 1.750" 1.750"

OPERATING GUIDELINESLong Part Number JC3BT-01200-01 Short Part Number JC3BT-06188-01


“W” Running Tool

The “W” Running Tool is designed to install the “B”, “C”, and “W” Lock Mandrels.

2" 3" 4"Fishneck OD 1.375" 1.750" 2.313"Connection 15/16"-10 15/16"-11 15/16"-12Made Up Length 10.438" 10.000" 9.750"Shear Pin 5/16' X 3/8" 5/16" X 1/2" 5/16" X 5/8"Engages 1.000" & 0.813" 1.500" 1.906"Max OD 1.500" 2.250" 2.750"

OPERATIONAL GUIDELINES


"W" Running Tool 2" (2-1/2") 3" 4"

Assembly WRTO-02025-01 WRTO-03500-01 WRTO-04000-01 Collet WRCO-02025-001 WRCO-03500-01 WRCO-04000-01 Fishneck WRFN-02025-01 WRFN-03500-01 WRFN-04000-01 Housing WRHO-02025-01 WRHO-03500-01 WRHO-04000-01 Prong WRPO-02025-01 WRPO-03500-01 WRPO-04000-01 Sleeve WRSO-02025-01 WRSO-03500-01 WRSO-04000-01


“J” Latch Soft Release

The “J” Latch Soft Release is used in applications that require setting “bombs”.


XBT / RBT Running Tool

The XBT and RBT Running Tools are used to run, locate, and set Type “BTX”,”BTXN”,”BTR”, and “BTRN” Locks and subsurface safety equipment.

OPERATING GUIDLINES - R-line 1.710" 1.781" 1.875" 2.125"

Fishneck OD 1.188" 1.375" 1.375" 1.375" Connection 15/16"-10 15/16"-10 15/16"-10 15/16"-10 Bottom Thread 3/8"-16 1/2"-13 1/2"-13 1/2"-13 Length 30.063" 29.313" 29.313" 29.313"

Shear Pin 3/16" X 1-1/8"

1/4" X 1-1/2"

1/4" X 1-1/2"

1/4" X 1-1/2"

OD Dogs Retracted 1.640" 1.750" 1.750" 2.063"

OD Dogs Expanded 1.760" 1.828" 1.937" 2.165" FN Engages 1.062" 1.375" 1.375" 1.375"

2.188" 2.313" 2.562"

Fishneck OD 1.750" 1.750" 1.750" Connection 15/16"-10 15/16"-10 15/16"-10 Bottom Thread 5/8"-11 5/8"-11 5/8"-11 Length 29.313" 29.313" 30.250"

Shear Pin 1/4" X 1 7/8"

1/4" X 1 7/8"

1/4" X 1 7/8"

OD Dogs Retracted 2.175" 2.175" 2.500"

OD Dogs Expanded 2.297" 2.359" 2.671" FN Engages 1.812" 1.812" 1.812"


XBT Running Tool

OPERATING GUIDLINES - X-Line 1.500" 1.625" 1.875" 2.313" 2.750" 2.813"

Fishneck OD 1.188" 1.188" 1.375" 1.750" 2.313" 2.313" Connection 15/16"-10 15/16"-10 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10 Bottom Thread 3/8"-16 3/8"-16 1/2"-13 5/8"-11 3/4"-10 3/4"-10 Length 30.063" 30.063" 29.313" 30.250" 31.000" 31.000"

Shear Pin 3/16" X 1 1/8"

3/16" X 1 1/8"

1/4" X 1 1/2"

1/4" X 1 7/8"

1/4" X 2 1/2"

1/4" X 2 1/2"

OD Dogs Retracted 1.410" 1.593" 1.750" 2.175" 2.718" 2.718"

OD Dogs Expanded 1.562" 1.672" 1.937" 2.359" 2.843" 2.906" FN Engages 1.062" 1.062" 1.375" 1.812" 2.313" 2.313"


"R" Running Tool 1.710" 1.781" 1.875" 2.125"

Assembly RLRT-01710-01 RLRT-01781-01 RLRT-01875-01 RLRT-02125-01 Mandrel XLRTM-01500-01 XLRTM-01875-01 XLRTM-01875-01 XLRTM-01875-01 Core XLRTC-01500-01 RLRTC-02125-01 RLRTC-02125-01 RLRTC-02125-01 Dog Spring XLDS-01500-08 XLDS-01875-08 XLDS-01875-08 XLDS-01875-08 Core Spring XLCS-01500-08 XLCS-01875-08 XLCS-01875-08 XLCS-01875-08 Split Ring (2) XLSR-01500-01 (2) XLSR-01875-01 (2) XLSR-01875-01 (2) XLSR-01875-01 Lug Segment (2) XLLS-01500-01 (2) XLLS-01875-01 (2) XLLS-01875-01 (2) XLLS-01875-01 Locator Dog (2) RLRLD-01710-01 (2) RLRLD-01781-01 (2) RLRLD-01875-01 (2) RLRLD-02125-01 Retainer Dog (2) XLRD-01500-01 (2) XLRD-01875-01 (2) XLRD-01875-01 (2) XLRD-01875-01 Dog Retainer RLRLD-01710-01 XLDR-01875-01 XLDR-01875-01 RLRDR-01875-01 Spring Housing XLSH-01500-01 XLSH-01875-01 XLSH-01875-01 XLSH-01875-01 Retainer Pin XLRP-01500-01 XLRP-01875-01 XLRP-01875-01 XLRP-01875-01


"R" Running Tool 2.188" 2.313" 2.562" 3.437"

Assembly RLRT-02188-01 RLRT-02313-01 RLRT-02562-01 RLRT-03437-01 Mandrel XLRTM-02313-01 XLRTM-02313-01 XLRTM-02313-01 RLRTM-03437-01 Core RLRTC-02188-01 RLRTC-02188-01 RLRTC-02188-01 RLTC-03437-01 Dog Spring XLDS-02313-08 XLDS-02313-08 XLDS-02313-08 RLRDS-03437-08 Core Spring XLCS-02313-08 XLCS-02313-08 XLCS-02313-08 RLRCS-03437-08 Split Ring XLSR-02313-01 XLSR-02313-01 XLSR-02313-01 (2) RLSR-03437-01 Lug Segment XLLS-02313-01 XLLS-02313-01 XLLS-02313-01 (2) RLRLS-03437-01 Locator Dog RLRLD-02188-01 XLLD-02313-01 RLRLD-02562-01 (2) RLRLD-03437-01 Retainer Dog XLRD-02313-01 XLRD-02313-01 XLRD-02313-01 (2) RLRRD-03437-01 Dog Retainer XLDR-02313-01 XLDR-02313-01 RLRDR-02562-01 RLRDR-03437-01 Spring Housing XLSH-02313-01 XLSH-02313-01 XLSH-02313-01 RLRSR-03437-01 Retainer Pin XLRP-02313-01 XLRP-02313-01 XLRP-02313-01 RLRRP-03437-01


"R" Running Tool 3.688"

Assembly RLRT-03688-01 Mandrel RLRTM-03688-01 Core RLRTC-03688-01 Dog Spring XLRDS-03813-08 Core Spring XLRCS-03813-08 Split Ring (2) XLRSR-03813-01 Lug Segment (2) XLRLS-03813-01 Locator Dog (2) RLRLD-03688-01 Retainer Dog (2) XLRRD-03813-01 Dog Retainer RLRDR-03688-01 Spring Housing RLRSH-03688-01


"X" Running Tool 1.500" 1.625" 1.875"

Assembly XLRT-01500-01 XLRT-01625-01 XLRT-01875-01 Mandrel XLRTM-01500-01 XLRTM-01500-01 XLRTM-01875-01 Core XLRTC-01500-01 XLRTC-01500-01 XLRTC-01875-01 Dog Spring XLDS-01500-08 XLDS-01500-08 XLDS-01875-08 Core Spring XLCS-01500-08 XLCS-01500-08 XLCS-01875-08 Split Ring (2) XLSR-01500-01 (2) XLSR-01500-01 (2) XLSR-01875-01 Lug Segment (2) XLLS-01500-01 (2) XLLS-01500-01 (2) XLLS-01875-01 Locator Dog (2) XLLD-01500-01 (2) XLLD-01625-01 (2) XLLD-01875-01 Retainer Dog (2) XLRD-01500-01 (2) XLRD-01500-01 (2) XLRD-01875-01 Dog Retainer XLDR-01500-01 XLDR-01500-01 XLDR-01875-01 Spring Housing XLSH-01500-01 XLSH-01500-01 XLSH-01875-01 Retainer Pin XLRP-01500-01 XLRP-01500-01 XLRP-01875-01


"X" Running Tool 2.313" 2.750" 2.813" 3.813"

Assembly XLRT-02313-01 XLRT-02750-01 XLRT-02813-01 XLRT-03813-01 Mandrel XLRTM-02313-01 XLRTM-02750-01 XLRTM-02750-01 XLRTM-03813-01 Core XLRTC-02313-01 XLRTC-02750-01 XLRTC-02750-01 XLRTC-03813-01 Dog Spring XLDS-02313-08 XLDS-02750-08 XLDS-02750-08 XLRDS-03813-08 Core Spring XLCS-02313-08 XLCS-02750-08 XLCS-02750-08 XLRCS-03813-08 Split Ring (2) XLSR-02313-01 (2) XLSR-02750-01 (2) XLSR-02750-01 (2) XLRSR-03813-01 Lug Segment (2) XLLS-02313-01 (2) XLLS-02750-01 (2) XLLS-02750-01 (2) XLRLS-03813-01 Locator Dog (2) XLLD-02313-01 (2) XLLD-02750-01 (2) XLLD-02813-01 (2) XLRLD-03813-01 Retainer Dog (2) XLRD-02313-01 (2) XLRD-02750-01 (2) XLRD-02750-01 (2) XLRRD-03813-01 Dog Retainer XLDR-02313-01 XLDR-02750-01 XLDR-02750-01 XLRDR-03813-01 Spring Housing XLSH-02313-01 XLSH-02750-01 XLSH-02750-01 XLRSH-03813-01 Retainer Pin XLRP-02313-01 XLRP-02750-01 XLRP-02750-01 XLRRP-03813-01


JK Running Tool

The JK Running Tool, in conjunction with a kickover tool, is used to install the “BK” and “BK-2” Latches in side pocket mandrels.

SPECIFICATIONS

Fishneck OD 1.188"

Pin Connection 15/16"-10

Length 3.550"

Shear Pins 1/8" X 1-1/8"

Max OD 1.300"

Part Number JKRT-02000-01


G Stop Running Tool

The G Stop Running Tool is used to set and run the G Stop Anchor.

SPECIFICATIONS

2"

Fishneck OD 1.375"

Pin Connections 15/16"-10

Made Up Length 30.188"

OD Slips (Retracted) 1.812"

OD Slips (Expanded) 2.015"

Shear Pin 1/8" X 1-13/16"

Description Part Number

Fishneck GSRFN-02000-01

Stop GSRN-02000-01

Slip Retainer GSRSR-02000-01

Slips (4) GSRS-02000-01

Expander GSRE-02000-01

Mandrel GSRM-02000-01

Core GSRC-02000-01


Selective Running Tool

The Selective Running Tool is an alternative to the “BTX” and “BTR” Running Tools. The collet style allows it to easily run any size “BTX” or “BTR” Locking Mandrel.

SPECIFICATIONS

2" 2 1/2"

Fishneck OD 1.375" 1.750"

Pin Connection 15/16"-10 15/16"-10

Bottom Thread 1/2"-13 5/8"-11

Made Up

Length 29.250" 29.250"

Shear Pin 1/4" X 1 1/4" 1/4" X 1 7/16"

Collet OD's

1.781 1.844

1.875 1.938

2.000 2.063

2.125 2.188

2.188 2.250

2.313 2.375

2.562 2.625


Selective Running Tool 2" 2 1/2"

Assembly 1.781 SRTBT-01781-01 2.188 SRTBT-02188-01

1.875 SRTBT-01875-01 2.313 SRTBT-02313-01

2.000 SRTBT-02000-01 2.562 SRTBT-02562-01

2.125 SRTBT-02125-01

Top Sub SRTTS-02000-01 SRTTS-02500-01

Collet 1.781 SRTC-01781-01 2.188 SRTC-02188-01

1.875 SRTC-01875-01 2.313 SRTC-02313-01

2.000 SRTC-02000-01 2.562 SRTC-02562-01

2.125 SRTC-02125-01

Housing SRTH-02000-01 SRTH-02500-01

Top Core SRTUC-02000-01 SRTUC-02500-01

Bottom Sub SRTBS-02000-01 SRTBS-02500-01

Bottom Core X SRTXC-02000-01 X SRTXC-02500-01

R SRTRC-02000-01 R SRTRC-02500-01

Lug Segment SRTLS-02000-01 SRTLS-02500-01

Collet Spring SRTCS-02000-08 SRTCS-02500-08

Shear Pin Ring SRTSR-02000-01 SRTSR-02500-01

Core Spring SRTS-02000-08 SRTS-02500-08

Retainer Lug SRTRL-02000-01 SRTRL-02500-01

Collet Washer SRTCW-02000-01 SRTCW-02500-01

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 H-1

Section VIII Pulling Tools


“GG” Fishing Socket

The “GG” Fishing Socket is a non-releasable pulling tool used mostly to pull prongs from “PS” and “PN” Plugs.

2 X 1 2 X 1-3/16 2 X 1-3/8Fishneck OD 1.375" 1.375" 1.375"Max OD 1.750" 1.750" 1.843"Connection 15/16"-10 15/16"-11 15/16"-12Length 10.813" 8.813" 9.563"Grabs 1" 1 3/16" 1 3/8"



"GG" Fishing Socket 2 X 1 2 X 1-3/16 2 X 1-3/8

Assembly GGFS-00201-01 GGFS-20187-01 GGFS-20375-01 Fishneck GGFN-00201-01 GGFN-20187-01 GGFN-20375-01 Skirt GGPTSS-02000-01 GGPTSS-20187-01 GGPTSS-20375-01 Nose GGNO-00201-01 GGNO-20187-01 GGNO-20375-01 Dog GGPTD-00201-01 GGPTD-20187-01 GGPTD-20375-01 ** Smaller Dogs available to catch 7/8" and 3/4" Fi shnecks


“GR” Adapter

The “GR” Adapter us used in conjunction with the “GS” Pulling Tool to convert it into a “jar up to release” type tool.

1-1/2" 2" 2-1/2" 3"Fishneck OD 1.188" 1.375" 1.750" 2.313"Connections 15/16"-10 15/16"-11 15/16"-12 1 1/16"-10Max OD 1.460" 1.813" 2.125" 2.725"Shear Pin 1/4" X 1 5/16" 5/16" X 1 11/16" 5/16" X 2" 3/8" X 2-1/2"Length 8.375" 8.375" 8.875" 9.313"



"GR" Adapter 1-1/2" 2" 2-1/2" 3"

Assembly GRAO-01500-01 GRAO-02000-01 GRAO-02500-01 GRAO-03000-01 Fishneck GRFN-01500-01 GRFN-02000-01 GRFN-02500-01 GRFN-03000-01 Pin GRSP-01500-01 GRSP-02000-01 GRSP-02500-01 GRSP-03000-01 Band GRBA-01500-01 GRBA-02000-01 GRBA-02500-01 GRBA-03000-01 Core Nut GRCN-01500-01 GRCN-02000-01 GRCN-02000-01 GRCN-03000-01


“GS” Pulling Tool

"

The “GS” Pulling Tool is a shear down releasing tool used to pull subsurface devices that have internal fishnecks. The “GS” is also capable of operating as a running tool as well.

1-1/2" 2" 2-1/2" 3" 4"Fishneck OD 1.188" 1.375" 1.750" 2.313" 2.313"Connection 15/16"-10 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10Max OD 1.469" 1.750" 2.160" 2.719" 3.625"Bottom Connection 1/2"-13 1/2"-13 5/8"-11 5/8"-11 2 1/8"-12Shear Pin 3/16 X 1 7/32 1/4 X 1 39/64 1/4 X 1 31/32 1/4 X 2 31/64 5/16 X 3 23/64Engages 1.062" 1.375" 1.812" 2.313" 3.125"Reach 1.219" 1.203" 1.203" 1.219" 1.203"Length 10.750" 11.625" 11.875" 12.125" 11.375"Set Screw 1/4"-20 X 1/4" 1/4"-20 X 1/4" 1/4"-20 X 1/4 1/4"-20 X 5/16" 1/4"-20 X 5/16"



"GS" Pulling Tool 1-1/4" 1-1/2" 2" 2-1/2"

Assembly GSPT-01250-01 GSPT-01500-01 GSPT-02000-01 GSPT-02500-01 Fishneck GSPTF-01250-01 GSPTF-01500-01 GSPTF-02000-01 GSPTF-02500-01 Core GSPTC-01250-01 GSPTC-01500-01 GSPTC-02000-01 GSPTC-02500-01 Top Sub GSPTS-01250-01 GSPTS-01500-01 GSPTS-02000-01 GSPTS-02500-01 Cylinder GSPC-01250-01 GSPC-01500-01 GSPC-02000-01 GSPC-02500-01 Core Spring GSPCS-01250-01 GSPCS-01500-01 GSPCS-02000-01 GSPCS-02500-01 Spring Retainer GSPSR-01250-01 GSPSR-01500-01 GSPSR-02000-01 GSPSR-02500-01 Dog Spring GSPDS-01250-01 GSPDS-01500-01 GSPDS-02000-01 GSPDS-02500-01 Dog Retainer GSPDR-01250-01 GSPDR-01500-01 GSPDR-02000-01 GSPDR-02500-01 Dog (4) GSPTD-01250-01 (4) GSPTD-01500-01 (4) GSPTD-02000-01 (4) GSPTD-02500-01 Shear Pin Cover GSPRS-01250-01 ***** ***** *****


"GS" Pulling Tool 3" 4" 5" 7"

Assembly GSPT-03000-01 GSPT-04000-01 GSPT-05000-01 GSPT-07000-01 Fishneck GSPTF-03000-01 GSPTF-03000-01 GSPTF-05000-01 GSPTF-07000-01 Core GSPTC-03000-01 GSPTC-04000-01 GSPTC-05000-01 GSPTC-07000-01 Top Sub GSPTS-03000-01 GSPTS-04000-01 GSPTS-05000-01 GSPTS-07000-01 Cylinder GSPC-03000-01 GSPC-04000-01 GSPC-05000-01 GSPC-07000-01 Core Spring GSPCS-03000-01 GSPCS-04000-01 GSPCS-05000-01 GSPCS-07000-01 Spring Retainer GSPSR-03000-01 GSPSR-04000-01 GSPSR-05000-01 GSPSR-07000-01 Dog Spring GSPDS-03000-01 GSPDS-04000-01 GSPDS-05000-01 GSPDS-07000-01 Dog Retainer GSPDR-03000-01 GSPDR-04000-01 GSPDR-05000-01 GSPDR-07000-01

Dog (4) GSPTD-03000-

01 (4) GSPTD-04000-

01 (4) GSPTD-04000-

01 (12) GSPTD-07000-

01 Washer ***** ***** GSPW-05000-01 GSPTW-07000-01 Retainer Ring ***** ***** ***** GSPRR-07000-01


“JD” Series Pulling Tool

The “JD” Series Pulling Tool is the Jar Down version of the “J” Pulling Tool family. It can accommodate different cores to change the reach of the tool during operation.


“JD” Series Pulling Tool

1-1/4" 1-3/8" 1-1/2" 1-5/8" 2" 2-1/2" 3"Fishneck OD 1.188" 1.188" 1.188" 1.188" 1.375" 1.375" 1.750"Pin Connection 15/16"-10 15/16"-10 15/16"-10 15/16"-10 15/16"-10 15/16"-10 1 1/16"-10Max OD 1.290" 1.375" 1.422" 1.625" 1.859" 2.250" 2.796"Bottom Connection 1/4"-20 1/4"-20 1/2"-13 1/2"-13 1/2"-13 1/2"-30 5/8"-11

Shear Pin3/16" X 1 9/64"

3/16" X 1 9/64"

3/16" X 1 11/64"

3/16" X 1 11/64"

5/16" X 1 31/64"

5/16" X 1 27/32"

3/8" X 2 11/32"

FN Engages .875" 1.000" 1.187" 1.187" 1.375" 1.750" 2.313"Reach JDC - 1.906" JDC - 1.812" JDC - 1.093" JDC - 1.031" JDC - 1.437" JDC - 1.265" JDC -1.643"

JDS 2.656" JDS - 2.562" JDS - 1.843" JDS - 2.281" JDS - 2.281" JDS - 2.391" JDS - 2.297"Length 12.906" 13.000" 13.063" 13.000" 14.391" 14.765" 15.000"

Set Screw **** ****1/4"-20 X 3/16"

1/4"-20 X 3/16"

5/16"-18 X 1/4"

3/8"-16 X 1/4"

7/16"-14 X 3/8"



"JD" Series Pulling Tool 1-1/4" 1-3/8" 1-1/2" 1-5/8"

Assembly JDC JDCBT-01250-01 JDCBT-01375-01 JDCBT-01500-01 JDCBT-01625-01 JDS JDSBT-01250-01 JDSBT-01375-01 JDSBT-01500-01 JDSBT-01625-01

"D" Fishneck JDCFN-01250-01 JDCFN-01250-01 JDCFN-01500-01 JDCFN-01500-01 Core

"C" JDCC-01250-01 JDCC-01250-01 JDCC-01500-01 JDCC-01500-01 "S" JDSC-01250-01 JDSC-01250-01 JDSC-01500-01 JDSC-01500-01

Dog JDCD-01250-01 JDCD-01375-01 JDCD-01500-01 JDCD-01500-01 Skirt JDSO-01250-01 JDSO-01375-01 JDSO-01500-01 JDSO-01625-01 Pawl (2) JDCP-01250-01 (2) JDCP-01375-01 (2) JDCP-01375-01 (2) JDCP-01375-01 Core Cap JDCCC-01375-01 JDCCC-01375-01 JDCCC-01500-01 JDCCC-01500-01 Shear Pin Cover JDSPC-01250-01 JDSPC-01250-01 ***** ***** Spring Retainer JDSR-01250-01 JDSR-01250-01 ***** ***** Core Spring JDCS-01250-01 JDCS-01250-01 JDCS-01250-01 JDCS-01250-01 Dog Spring JDDS-01250-01 JDDS-01375-01 JDDS-01500-01 JDDS-01500-01


"JD" Series Pulling Tool 2" 2-1/2" 3" 4"

Assembly JDC JDCBT-02000-01 JDCBT-012500-01 JDCBT-03000-01 JDCBT-04000-01 JDS JDSBT-02000-01 JDSBT-02500-01 JDSBT-03000-01 JDSBT-04000-01

"D" Fishneck JDCFN-02000-01 JDCFN-02500-01 JDCFN-03000-01 JDCFN-04000-01 Core


Dog JDCD-02000-01 JDCD-02500-01 JDCD-03000-01 JDCD-04000-01 Skirt JDSO-02000-01 JDSO-02500-01 JDSO-03000-01 JDSO-04000-01 Pawl (3) JDCP-02000-01 (3) JDCP-02000-01 (3) JDCP-02000-01 (4) JDCP-02000-01 Core Cap JDCCC-02000-01 JDCCC-02500-01 JDCCC-03000-01 JDCCC-04000-01 Core Spring JDCS-02000-01 JDCS-02500-01 JDCS-03000-01 JDCS-04000-01 Dog Spring JDDS-02000-01 JDDS-02500-01 JDDS-03000-01 JDDS-04000-01 Spring Cover ***** ***** ***** JDCSC-04000-01 ** Heavy Wall Skirts Available for 2" and 2-1/2" ** Inconnel Springs also available.


“JU” Series Pulling Tool

The “JU” Series Pulling Tool is the Jar Up version in the “J” Pulling Tool family. It also has the options of swapping cores out to provide for longer reach.


“JU” Series Pulling Tool

1-1/4" 1-3/8" 1-1/2" 1-5/8" 2" 2-1/2" 3"Fishneck OD 1.188" 1.188" 1.188" 1.188" 1.375" 1.375" 1.750"Pin Connectioin 15/16"-10 15/16"-10 15/16"-10 15/16"-10 15/16"-10 15/16"-10 1 1/16"-10Max OD 1.290" 1.375" 1.422" 1.625" 1.859" 2.250" 2.797"Bottom Connection 1/4"-20 1/4"-20 1/2"-13 1/2"-13 1/2"-13 1/2"-13 5/8"-11

Shear Pin3/16" X 1 9/64"

3/16" X 1 9/64"

3/16" X 1 5/32"

3/16" X 1 11/64"

5/16" X 1 31/64"

5/16" X 1 27/32"

3/8" X 2 21/64"

FN Engages .875" 1.000" 1.188" 1.188" 1.375" 1.750" 2.312"Reach C -1.937" C - 1.000" C - 1.093" C - 1.093" C - 1.437" C - 1.312" C - 1.437"

S - 2.688" S - 2.625" S - 1.843" S - 1.843" S - 2.125" S - 2.187" S - 2.125"Length 12.906" 12.281" 13.000" 21.938" 14.328" 14.750" 14.750"

Set Screw1/4"-20 X 3/8"

1/4"-20 X 3/8"

1/4"-20 X 3/8"

1/4"-20 X 3/8"

5/16"-18 X 1/2"

3/8"-16 X 1/2"

7/16"-14 X 1/2"



"JU" Series Pulling Tool 1-1/4" 1-3/8" 1-1/2" 1-5/8"

Assembly JUC JUCBT-01250-1 JUCBT-01375-01 JUCBT-01500-01 JUCBT-01625-01 JUS JUSBT-01250-01 JUSBT-01375-01 JUSBT-01500-01 JUSBT-01625-01 "JU" Fishneck JUCFN-01250-01 JUCFN-01250-01 JUCFN-01500-01 JUCFN-01625-01 Core "C" JDCC-01250-01 JDCC-01250-01 JDCC-01500-01 JDCC-01500-01 "S" JDSC-01250-01 JDSC-01250-01 JDSC-01500-01 JDSC-01500-01 Dog JDCD-01250-01 JDCD-01375-01 JDCD-01500-01 JDCD-01500-01 Skirt JDSO-01250-01 JDSO-01375-01 JDSO-01500-01 JDSO-01625-01 Pawl (2) JDCP-01250-01 (2) JDCP-01375-01 (2) JDCP-01375-01 (2) JDCP-01375-01 Shear Pin Cover JDSPC-01250-01 JDSPC-01250-01 ***** ***** Spring Retainer JDSR-01250-01 JDSR-01250-01 ***** ***** Core Spring JDCS-01250-01 JDCS-01250-01 JDCS-01250-01 JDCS-01250-01 Dog Spring JDDS-01250-01 JDDS-01375-01 JDDS-01500-01 JDDS-01500-01


"JU" Series Pulling Tool 2" 2-1/2" 3" 4"

Assembly JDC JUCBT-02000-01 JUCBT-02500-01 JUCBT-03000-01 JUCBT-04000-01 JDS JUSBT-02000-01 JUSBT-02500-01 JUSBT-03000-01 JUSBT-04000-01

"U" Fishneck JUCFN-02000-01 JUCFN-02500-01 JUCFN-03000-01 JUCFN-04000-01 Core


Dog JDCD-02000-01 JDCD-02500-01 JDCD-03000-01 JDCD-04000-01 Skirt JDSO-02000-01 JDSO-02500-01 JDSO-03000-01 JDSO-04000-01 Pawl (3) JDCP-02000-01 (3) JDCP-02000-01 (3) JDCP-02000-01 (4) JDCP-02000-01 Core Spring JDCS-02000-01 JDCS-02500-01 JDCS-03000-01 JDCS-04000-01 Dog Spring JDDS-02000-01 JDDS-02500-01 JDDS-03000-01 JDDS-04000-01 Spring Cover ***** ***** ***** JDSCS-04000-01 ** Heavy Wall Skirts Available for 2" and 2-1/2" ** Inconnel Springs also available.


“J” Series Bell Guides

B & T manufactures bell guides for use with threaded “JDC” Skirts. The bell guide directs the pulling tool toward the desired fishneck in a wide well opening.

Part Number DescriptionJDBG-02250-01 2.-1/4" JDC Bell Guide

JDBG-02750-01 2-3/4" Bell Guide for 2" JDC

JDBG-03350-01 3-1/2" Bell Guide for 3" J Pulling Tool

JDBG-03425-01 4-1/4" Bell Guide for 3" J Pulling Tool

JDBG-03500-01 3-1/2" Bell Guide for 2" JDC

JDBG-12500-01 2-1/2" Bell Guide for 2-1/2" JDC

JDBG-12750-01 2-3/4" Bell Guide for 2-1/2" JDC

JDBG-13500-01 3-1/2" Bell Guide for 2-1/2 JDC

B & T can also manafacture different sizes to meet your needs.


“R” Pulling Tool

The “R” Pulling Tool is a shear up releasing tool designed to pull equipment with an external fishneck. The core of “R” Pulling Tool can be replaced to give the tool more desired reach.

OPERATING GUIDLINES 1-1/4" 1-1/2" 2"

Fishneck OD 1.000" 1.375" 1.375" Pin Connection 5/8"-11 15/16"-10 15/16"-10 Max OD 1.215" 1.425" 1.765" Bottom Connection 3/8"-16 3/8"-16 1/2"-13 Shear Pin 3/16" X 1" 1/4" X 1 3/16" 5/16" X 1 15/32" FN Engages 1.000" 1.188" 1.375" RB 1.218" 1.265" 1.219" Reach RJ 1.843" 2.547" 2.547" RS 2.125" 1.797" 1.984" Length 12.375" 11.500" 12.968" Set Screw 1/4"-20 X 1/4" 5/8"-18 X 5/16" 7/16"-14 X 1/4"

2-1/2" 3"

Fishneck OD 1.375" 2.313"

Pin Connection 15/16"-10 1 1/16"-10

Max OD 2.170" 2.742"

Bottom Connection 1/2"-13 5/8"-11

Shear Pin 5/16" X 1 53/64" 3/8" X 2 25/64"

FN Engages 1.750" 2.313"

RB 1.203" 1.297"

Reach RJ 2.547" 2.609"

RS 1.984" 2.190"

Length 13.125" 15.000"

Set Screw 3/8"-16 X 3/8" 7/16"-14 X 3/8"


"R" Pulling Tool 1-1/4" 1-1/2" 2"

Assembly

"RB" RBPT-01250-01 RBPT-01500-01 RBPT-02000-01 "RJ" RJPT-01250-01 RJPT-01500-01 RJPT-02000-01 "RS" RSPT-01250-01 RSPT-01500-01 RSPT-02000-01

Fishneck RBFN-01250-01 RBFN-01500-01 RBFN-02000-01 Core

"RB" RBPTC-01250-01 RBPTC-01500-01 RBPTC-02000-01 "RJ" RJPTC-01250-01 RJPTC-01500-01 RJPTC-02000-01 "RS" RSPTC-01250-01 RSPTC-01500-01 RSPTC-02000-01

Dog (3) RBPTD-01250-01 (3) RBPTD-01500-01 (3) RBPTD-02000-01 Skirt RBPS-01250-01 RBPS-01500-01 RBPS-02000-01 Dog Washer RBDW-01250-01 RBWO-01500-01 RBWO-02000-01 Shear Pin Cover RBSPC-01250-01 RBPPC-01500-01 RBPPC-02000-01 Spring Sleeve **** **** RBPTS-02000-01 Dog Spring RBDS-01250-01 RBPDS-01500-01 SBDS-02000-01 Core Spring RBCS-01250-01 RBCS-01500-01 RBSC-02000-01


"R" Pulling Tool 2-1/2" 3" 4"

Assembly

"RB" RBPT-02500-01 RBPT-03000-01 RBPT-04000-01 "RJ" RJPT-02500-01 RJPT-03000-01 ***** "RS" RSPT-02500-01 RSPT-03000-01 RSPT-04000-01

Fishneck RBFN-02500-01 RBFN-03000-01 RBFN-04000-01 Core

"RB" RBPTC-02500-01 RBPTC-03000-01 RBPTC-04000-01 "RJ" RJPTC-02500-01 RJPTC-03000-01 ***** "RS" RSPTC-02500-01 RSPTC-03000-01 RSPTC-04000-01

Dog (3) RBPTD-02500-01 (3) RBPTD-03000-01 (4) RBPTD-04000-01 Skirt RBPS-02500-01 RBPS-03000-01 RBPS-04000-01 Dog Washer RBDW-02500-01 RBDW-03000-01 RBDW-04000-01 Shear Pin Cover RBPPC-02500-01 RBPPC-03000-01 RBPPC-04000-01 Spring Sleeve RBPTS-02500-01 RBPTS-03000-01 ***** Dog Spring RBDS-02500-01 RBDS-03000-01 RBDS-04000-01 Core Spring RBCS-02500-01 RBCS-03000-01 RBCS-04000-01


“S” Pulling Tool

The “S” Pulling Tool is a shear down tool used to pull tools with an external fishneck. The core can be replaced to provide different reach lengths.

OPERATING GUIDLINES 1-1/2" 1-1/2" 2"

Fishneck OD 1.000" 1.188" 1.375" Pin Connection 5/8"-11 15/16"-10 15/16"-10 Max OD 1.219" 1.418" 1.765" Bottom Connection 3/8"-16 3/8"-16 1/2"-13 Shear Pin 3/16" X 1 3/32" 3/16" X 1 17/64" 1/4" X 1 39/64" FN Engages 1.000" 1.188" 1.375" Reach SB 1.280" 1.297" 1.219" Reach SS **** 1.780" 2.031" Length 13.750" 12.469" 14.938"

2-1/2" 3"

Fishneck OD 1.375" 2.313" Pin Connection 15/16"-10 1 1/16"-10 Max OD 2.175" 2.740" Bottom Connection 1/2"-14 5/8"-11 Shear Pin 1/4' X 1 63/64" 5/16' X 2 1/8" FN Engages 1.750" 2.313" Reach SB 1.281" 1.500" Reach SS 2.000" 2.210" Length 15.328" 15.313"


"S" Pulling Tool 1-1/4" 1-1/2" 2"

Assembly SB SBPT-01250-01 SBPT-01500-01 SBPT-02000-01 SS *** SSPT-01500-01 SSPT-02000-01

Fishneck SBFN-01250-01 SBFN-01500-01 SBFN-02000-01 Core

SB SBCO-01250-01 SBCO-01500-01 SBCO-02000-01 SS *** SSCO-01500-01 SSCO-02000-01

Dog (3) RBPTD-01250-01 (3) RBPTD-01500-01 (3) RBPTD-02000-01 Skirt SBSO-01250-01 SBSO-01500-01 SBSO-02000-01 Dog Washer RBDW-01250-01 RBWO-01500-01 RBWO-02000-01 Core Nut SBCN-01250-01 SBCN-01500-01 SBCN-02000-01 Shear Pin Cover SBSPC-01250-01 SBSPC-01500-01 SBSPC-02000-01 Core Spring GSPTC-01250-01 SBCS-01500-01 GSPCS-02000-01 Dog Spring RBDS-01250-01 RBPDS-01500-01 SBDS-02000-01


"S" Pulling Tool 2-1/2" 3" 4"

Assembly SB SBPT-02500-01 SBPT-03000-01 SBPT-04000-01 SS SSPT-02500-01 SSPT-03000-01 SSPT-04000-01

Fishneck SBFN-02500-01 SBFN-03000-01 SBFN-03000-01 Core

SB SBPTC-02500-01 SBPTC-03000-01 SBCO-04000-01 SS SSPTC-02500-01 SSPTC-03000-01 SSCO-04000-01

Dog (3) RBPTD-02500-01 (3) RBPTD-03000-01 (4) RBPTD-04000-01 Skirt SBSO-02500-01 SBSO-03000-01 SBSO-04000-01 Dog Washer RBDW-02500-01 RBDW-03000-01 RBDW-04000-01 Core Nut SBCN-02500-01 SBCN-03000-01 SBCN-03000-01 Shear Pin Cover SBSPC-02500-01 SBSPC-03000-01 SBSPC-03000-01 Core Spring GSPTC-02500-01 GSPTC-03000-01 GSPTC-03000-01 Dog Spring RBDS-02500-01 RBDS-03000-01 RBDS-04000-01


“Heavy Duty” Pulling Tool

The B & T Heavy Duty Pulling Tool is a collet style Pulling Tool designed to latch and retrieve wireline tools where heavy jarring is required. The construction of the Heavy Duty Releasable Pulling Tool is extremely stout and allows a full 360 degrees of engagement with the target fishing neck.


"Heavy Duty" Pulling Tool 2" 2-1/2" 3"

Assembly HDPT-02000-01 HDPT-02500-01 HDPT-03000-01 Core Cap HDCC-02000-01 HDCC-02000-01 HDCC-03000-01 Core HDCO-02000-01 HDCO-02500-01 HDCO-03000-01 Core Spring HDCS-02000-01 HDCS-02000-01 GSPCS-03000-01 Dog Housing HDDH-02000-01 HDDH-02500-01 HDDH-03000-01 Dog HDDO-02000-01 HDDO-02500-01 HDDO-03000-01 Dog Spring HDDS-02000-01 HDDS-02000-01 SBDS-02500-01 Dog Washer HDDW-02000-01 HDDW-02000-01 HDDW-03000-01 Housing HDHO-02000-01 HDHO-02500-01 HDHO-03000-01 Shear Pin Cover HDSPC-02000-01 HDSPC-02500-01 HDSPC-03000-01 Top Sub HDTS-02000-01 HDTS-02500-01 HDTS-03000-01


PRS Pulling Tool

The PRS Pulling Tool is a shear releasing tool used in pulling subsurface devices which have internal fishing necks. The PRS Pulling Tool can be configured to shear up or down depending upon the pulling operations.

SPECIFICATIONS

2"

Fishneck OD 1.375"

Pin Connection 15/16"-10

Max OD 1.813"

Bottom Connection 1/2"-13

Shear Pin 5/16" X 1 21/32"

Fishneck Engages 1.500"

Made Up Length 20.625"


Bull Dog Spear

The Bull Dog Spear is designed to pull tools with a sufficient ID as a last resort situation. The tool is designed to get inside of an ID and the slips will expand to latch onto the wall in order to pull out the desired tool.


Repinning Tool

Releasing Tool

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 I-1

Section IX Prongs


DK Prongs

DX Prongs

Pulling Prong

Running Prong


Pulling Running Pulling Running Thread 1/2'-13 1/2"-13 5/8"-11 5/8"-11 OD 0.563 0.940 0.940 1.230 Length 42.000 2.800 39.000 3.500


Pulling Running Pulling Running Thread 1/2"-13 1/2"-13 5/8"-11 5/8"-11 OD 0.500 0.500 0.688 0.688 Length 16.500 6.500 16.500 6.500


P Prongs

SPECIFICATIONS THREAD OD LENGTH

P-100 1/2"-13 0.500 21.375 P-104 1/2"-13 0.688 21.625 P-141 5/8"-11 1.125 23.375 P-145 1/2"-13 0.844 22.500 P-176 1/2"-13 0.500 25.188 P-242 1/2"-13 0.688 22.500 P-420 3/8"-16 0.531 18.000 P-478 3/8"-16 0.531 17.750 P-479 1/2"-13 0.656 21.375 P-480 1/2"-13 0.844 21.750 P-481 5/8"-11 1.344 22.375 P-572 5/8"-11 1.469 23.000


XBT / RBT Running Prong

1.71 1.781"-2.125" 2.188" 2.562"Threads 3/8"-16 1/2"-13 5/8"-11 5/8"-11OD .712" .865" 1.109" 1.340"Overall Length 4.844" 5.225" 5.750" 5.281"

OPERATING GUIDELINES - "RBT"

1.500" 1.875" 2.313" 2.813"Threads 3/8"-16 1/2"-13 5/8"-11 3/4"-10OD .712" .962" 1.340" 1.710"Overall Length 4.844" 4.938" 5.125" 5.500"

OPERATING GUIDELINES - "XBT"

Size Part Number 1.710 R RRPO-01710-01 2.125 R RRPO-02125-01 2.188 R RRPO-02188-01 2.562 R RRPO-02562-01 1.500 X XRPO-01500-01 1.875 X XRPO-01875-01 2.313 X XRPO-02313-01 2.813 X XRPO-02813-01


XBT / RBT Pulling Prong

1.710" 1.781"-2.125" 2.188" 2.562"Connection 1/2"-13 1/2"-13 5/8"-11 5/8"-11OD .715" .870" 1.093" 1.300"Length 12.438" 12.625" 13.938" 12.813"

OPERATING GUIDELINES - "RBT"

1.500" 1.875" 2.313" 2.813"Connection 1/2"-13 1/2"-13 5/8"-11 5/8"-11OD .715" .969" 1.300" 1.710"Length 12.438" 12.250" 12.813" 13.000"

OPERATING GUIDELINES - "XBT"

SIZE PART NUMBER 1.710 RPPO-01710-01 2.125 RPPO-02125-01 2.188 RPPO-02188-01 2.562 RPPO-02562-01 1.500 XPPO-01500-01 1.875 XPPO-01875-01 2.313 XPPO-02313-01 2.813 XPPO-02813-01


“A” Probe

“B” Probe

The “A” Probe is a wireline manipulated device that is used to close the dogs (or locks) on a Baker Style Locking Mandrel in order to remove it from the well.

The “B” Probe is a wireline manipulated device that is used to close the dogs (or locks) on a Baker top or bottom No Go Style lock mandrel in order to remove it from the well.

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 J-1

Section X Shifting Tools


“B” Shifting Tool

The “B” Shifting Tool is designed to selectively locate and shift most sliding sleeves. The keys engage the SSD inner sleeve, and depending upon the direction the tool is run, the sleeve is shifted up or down.

OPERATING GUIDLINES 1.500" 1.625" 1.875"

Fishneck OD 1.188" 1.188" 1.375" Pin Connection 15/16"-10 15/16"-10 15/16"-10 Length 10.500" 10.938" 11.313" OD (Retracted) 1.406" 1.593" 1.840" OD (Expanded) 1.719" 1.890" 2.156" Set Screw 1/4"-20 X 1/4" 1/4"-20 X 5/16" 3/8"-16 X 1/4" Shear Pin 1/4" X 1 1/8" 1/4" X 1 1/8" 1/4" X 1 3/8"

2.313" 2.562"

Fishneck OD 1.750" 1.750" Pin Connection 15/16"-10 15/16"-10 Length 11.813" 11.938" OD (Retracted) 2.156" 2.530" OD (Expanded) 2.656" 2.968" Set Screw 3/8"-16 X 1/4" 3/8"-16 X 5/16" Shear Pin 1/4" X 1 3/8" 1/4" X 1 5/8"


"B" Shifting Tool 1.500" 1.625" 1.710" 1.781"

Assembly BSTO-01500-01 BSTO-01625-01 BSTO-01710-01 BSTO-01781-01 Top Sub BSTS-01500-01 BSTS-01625-01 BSTS-01710-01 BSTS-01875-01 Body BSTB-01500-01 BSTB-01500-01 BSTB-01500-01 BSTB-02000-01 Upper Key Retainer BSTUK-01500-01 BSTUK-01625-01 BSTUK-01710-01 BSTUK-01875-01 Lower Key Retainer BSTLK-01500-01 BSTLK-01625-01 BSTLK-01710-01 BSTLK-01875-01 Key

Positive (2) BSTPK-01500-

01 (2) BSTPK-01625-

01 (2) BSTPK-01710-

01 (2) BSTPK-01781-

01 Selective (2) BSTK-01500-01 (2) BSTK-01625-01 (2) BSTK-01710-01 (2) BSTK-01781-01 Key Spring BSTKS-01500-08 BSTKS-01500-08 BSTKS-01500-08 BSTKS-02025-08 Collet BSTC-01500-01 BSTC-01500-01 BSTC-01500-01 BSTC-02000-01


"B" Shifting Tool

1.875" 2.125" 2.313" 2.562" Assembly BSTO-01875-01 BSTO-02125-01 BSTO-02313-01 BSTO-02562-01 Top Sub BSTS-01875-01 BSTS-02125-01 BSTS-02313-01 BSTS-02562-01 Body BSTB-02000-01 BSTB-02000-01 BSTB-02500-01 BSTB-02500-01 Upper Key Retainer BSTUK-01875-01 BSTUK-021250-01 BSTUK-02313-01 BSTUK-02313-01 Lower Key Retainer BSTLK-01875-01 BSTLK-02125-01 BSTLK-02313-01 BSTLK-02313-01 Key


01 (2) BSTPK-02125-

01 (2) BSTPK-02313-

01 (2) BSTPK-02562-

01

Selective (2) BSTK-02000-01 (2) BSTK-021250-

01 (2) BSTK-02500-01 (2) BSTK-02562-01

Key Spring (2) BSTKS-02025-

08 (2) BSTKS-02025-

08 (2) BSTKS-02025-

08 (2) BSTKS-02025-

08 Collet BSTC-02000-01 BSTC-02000-01 BSTC-02500-01 BSTC-02500-01


"B" Shifting Tool 2.750" 2.813" 3.688" 3.813"

Assembly BSTO-02750-01 BSTO-02813-01 BSTO-03688-01 BSTO-03813-01 Top Sub BSTS-03000-01 BSTS-03000-01 BSTS-03688-01 BSTS-03813-01 Body BSTB-03000-01 BSTB-03000-01 BSTB-03688-01 BSTB-03813-01 Upper Key Retainer BSTUK-03000-01 BSTUK-03000-01 BSTUK-03688-01 BSTUK-03813-01 Lower Key Retainer BSTLK-03000-01 BSTLK-03000-01 BSTLK-03688-01 BSTLK-03813-01 Key


01 (2) BSTPK-02813-

01 (2) BSTPK-03688-

01 (2) BSTPK-03813-

01 Selective (2) BSTK-02750-01 (2) BSTK-02813-01 (2) BSTK-03688-01 (2) BSTK-03813-01


08 (2) BSTKS-02025-

08 (2) BSTKS-03813-

01 (2) BSTKS-03813-

01 Collet BSTC-03000-01 BSTC-03000-01 BSTC-03688-01 BSTC-03813-01 Retainer ***** ***** BSTRM-03688-01 BSTR-03813-01


"B" Shifting Tool 4.562"

Assembly BSTO-04562-01 Top Sub BSTS-04562-01 Body BSTB-04562-01 Upper Key Retainer BSTUK-04562-01 Lower Key Retainer BSTLK-04562-01 Key Positive (2) BSTPK-04562-01 Selective (2) BSTK-04562-01 Key Spring BSTKS-04562-08 Collet BSTC-04562-01


“BO” Shifting Tool

The “BO” Selective Shifting Tool is designed to locate and shift sliding side doors to the down position. The tool is made selective by the lower half, which is designed to function like an “X” Running Tool.

2" 2-1/2" 2.750" 2.813"Fishneck OD 1.375" 1.750" 2.313" 2.313"Connections 15/16"-10 15/16"-10 1 1/16"-10 1 1/16"-10OD (Keys Retracted) 1.828" 2.281" 2.718" 2.740"OD (Keys Expanded) 2.188" 2.640" 3.156" 3.219"Length 19.250" 19.250" 18.000" 18.000"Set Screw 3/8"-16 X 1/4" 3/8"-16 X 1/4" 3/8"-16 X 5/16" 3/8"-16 X 5/16"OD (Dogs Expanded) 1.938" 2.375" 2.844" 2.906"OD (Dogs Retracted) 1.750" 2.063" 2.688" 2.740"



"BO" Shifting Tool 2" 2.125" 2.188" 2-1/2" Assembly BOST-02000-01 BOST-02125-01 BOST-02188-01 BOST-02500-01 Fishneck BOFN-02000-01 BOFN-02500-01 BOFN-02500-01 BOFN-02500-01


08 (2) BSTKS-02025-

08 (2) BSTKS-02025-

08 (2) BSTKS-02025-

08

Selective Key (2) BSTK-01875-

01 (2) BSTK-02313-

01 (2) BSTK-02313-

01 (2) BSTK-02313-

01 Upper Key Retainer BSTUK-01875-01 BSTUK-02313-01 BSTUK-02313-01 BSTUK-02313-01 Lower Key Retainer BSTLK-01875-01 BSTLK-02313-01 BSTLK-02313-01 BSTLK-02313-01 Spring Housing BOSH-02000-01 BOSH-02125-01 BOSH-02188-01 BOSH-02500-01 Dog Retainer BODR-02000-01 BODR-02125-01 BODR-02188-01 BODR-02500-01

Locator Dog (2) XLLD-01875-01 (2) RLRLD-02125-

01 (2) RLRLD-02188-

01 (2) XLLD-02313-01 Dog Spring XLDS-01875-01 XLDS-02313-01 XLDS-02313-01 XLDS-02313-01 Core Spring XLCS-01875-01 XLCS-02313-01 XLCS-02313-01 XLCS-02313-01

Split Ring (2) XLSR-01875-

01 (2) XLSR-02313-

01 (2) XLSR-02313-

01 (2) XLSR-02313-

01 Locator Mandrel BOLM-02000-01 BOLM-02500-01 BOLM-02500-01 BOLM-02500-01


"BO" Shifting Tool 2.562" 2.750" 2.813" Assembly BOST-02562-01 BOST-03000-01 BOST-02813-01 Fishneck BOFN-02500-01 BOFN-03000-01 BOFN-03000-01 Key Spring (2) BSTKS-02025-08 (2) BSTKS-02025-08 (2) BSTKS-02025-08 Selective Key (2) BSTK-02313-01 (2) BSTK-02750-01 (2) BSTK-02813-01 Upper Key Retainer BSTUK-02313-01 BSTUK-02750-01 BSTUK-02750-01 Lower Key Retainer BSTLK-02313-01 BSTLK-02813-01 BSTLK-02813-01 Spring Housing BOSH-02562-01 BOSH-03000-01 BOSH-03000-01 Dog Retainer BODR-02562-01 BODR-03000-01 BODR-03000-01 Locator Dog (2) RLRLD-02562-01 (2) XLRLD-02750-01 (2) XLRLD-02813-01 Dog Spring XLDS-02313-01 XLRDS-02750-01 XLRDS-02750-01 Core Spring XLCS-02313-01 XLRCS-02750-01 XLRCS-02750-01 Split Ring (2) XLSR-02313-01 (2) XLRSR-02750-01 (2) XLRSR-02750-01 Locator Mandrel BOLM-02500-01 BOLM-03000-01 BOLM-03000-01

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 K-1

Section XI Bailers


Sand Bailer

Flapper Bottom Chisel Bottom

The Sand Bailer is a 2-piece pump action bailer , designed to remove sand and small debris in the tubing string through the upward stroking motion of the pump section. Debris is held in the load barrel using different style bottoms, which may be specified.

1" 1-1/4" 1-1/2"Fishneck OD 1.000" 1.188" 1.188"Max OD 1.000" 1.250" 1.500"Pin Connection 5/8"-11 15/16"-10 15/16"-10

1-5/8" 1-3/4" 2"Fishneck OD 1.375" 1.375" 1.375"Max OD 1.625" 1.750" 2.000"Pin Connection 15/16"-10 15/16"-10 15/16"-10



Sand Bailer 1-1/4" 1-1/2" 1-5/8"

Assembly SBBT-01250-01 SBBT-01500-01 SBBT-01625-01 Fishneck PBFN-11250-01 PBFN-02025-01 PBFN-02025-01 Pump Barrel SBPB-01250-01 SBPB-01500-01 SBUB-01625-01 Stroke Rod PBRO-11250-01 PBRO-02025-01 PBRO-02025-01 Piston Stop SBPS-01250-01 SBTS-01500-01 SBTS-01625-01 Piston SBPO-01250-01 SBPO-01375-01 SBPO-01750-01 Wobble Washer (4) BWWB-01250-07 (4) BWWB-01500-07 (4) BWWB-01625-07 Piston Nut SBNO-01250-01 SBNO-01375-01 SBNO-01750-01 Stop Ring SBSR-01250-01 SBSR-02000-01 SBSR-02000-01 Bottoms

Ball Bottom PB2BB-01250-01 PB2BB-01500-01 PB2BB-01625-01 Flapper Bottom PBFB-01250-01 PBFB-01500-01 PBFB-01625-01

Chisel Bottom SBCB-01250-01 SBCB-01500-01 SBCB-01625-01 Load Barrel SBLB-01250-01 SBLB-01500-01 SBLB-01625-01 Crossover SBDPS-01250-01 SBDPS-01500-01 SBDPS-01625-01


Sand Bailer 1-3/4" 2"

Assembly SBBT-01750-01 SBBT-02000-01 Fishneck PBFN-02025-01 PBFN-02025-01 Pump Barrel SBPB-01750-01 SBPB-02000-01 Stroke Rod PBRO-11250-01 PBRO-02025-01 Piston Stop SBTS-01750-01 SBTS-02000-01 Piston SBPO-01750-01 SBPO-01750-01 Wobble Washer (4) BWWB-01750-07 (4) BWWB-02000-07 Piston Nut SBNO-01750-01 SBNO-01750-01 Stop Ring SBSR-02000-01 SBSR-02000-01 Bottoms

Ball Bottom PB2BB-01750-01 PB2BB-02000-01 Flapper Bottom PBFB-01750-01 PBFB-02000-01

Chisel Bottom SBCB-01750-01 SBCB-02000-01 Load Barrel SBLB-01750-01 SBLB-02000-01 Crossover SBDPS-01750-01 SBDPS-02000-01 ** Fine Thread Equipment Available


Maxwell Style Bailer

The Maxwell is a pump action bailer designed to remove debris and sand in the tubing string through using upward jarring motion. B & T has different lengths of pump barrels as well as load barrels to suit different bailing needs.


Maxwell Style Bailer 1-1/4" 1-1/2" 1-5/8"

Pump Section Standard MSPS-11250-01 MSPS-11500-01 MSPS-11625-01

8 ft MSPS-11258-01 MSPS-11508-01 MSPS-11628-01 Fishneck PBFN-02025-01 PBFN-02025-01 PBFN-02025-01 Pump Barrel

Standard MBPB-11250-01 MBPB-11500-01 MBPB-11625-01 8ft MBPB-11258-01 MBPB-11508-01 MBPB-11628-01

Stroke Rod

Standard PBRO-11250-01 PBRO-02025-01 PBRO-02025-01 8ft PBRO-02025-08 PBRO-02025-08 PBRO-02025-08

Piston Stop SBPS-01250-01 SBPS-01500-01 SBPS-01625-01 Valve Hanger MBVH-01250-01 MBVH-01500-01 MBVH-01625-01 Valve MBVO-01250-01 MBVO-01250-01 MBVO-01250-01 Brass Piston MBBP-01250-01 MBBP-01500-01 MBBP-01625-01 Stop Ring SBSR-02000-01 SBSR-02000-01 SBSR-02000-01


Maxwell Style Bailer 1-1/4" 1-1/2" 1-5/8"

Load Barrel Standard MBLB-11250-01 MBLB-11500-01 MBLB-11625-01

8ft MBLB-11258-01 MBLB-11508-01 MBLB-11628-01 10ft MBLB-11250-10 MBLB-11500-10 MBLB-11625-10

Crossover SBDPS-11250-01 SBDPS-11500-01 SBDPS-11625-01


Chisel Bottom SBCB-11250-01 SBCB-11500-01 SBCB-11625-01


Maxwell Style Bailer 1-3/4" 2" 2-1/4"

Pump Section Standard MSPS-11750-01 MSPS-12000-01 MSPS-12250-01

8 ft MSPS-11758-01 MSPS-12008-01 MSPS-12258-01 Fishneck PBFN-02025-01 PBFN-02025-01 PBFN-02025-01 Pump Barrel


Stroke Rod

Standard PBRO-02025-01 PBRO-02025-01 PBRO-02025-01 8ft PBRO-02025-08 PBRO-02025-08 PBRO-02025-08



Maxwell Style Bailer 1-3/4" 2" 2-1/4"

Load Barrel Standard MBLB-11750-01 MBLB-12000-01 MBLB-12250-01

8ft MBLB-11758-01 MBLB-12008-01 MBLB-12258-01 10ft MBLB-11750-10 MBLB-12000-10 MBLB-12250-10

Crossover SBDPS-11750-01 SBDPS-12000-01 SBDPS-12250-01


Chisel Bottom SBCB-11750-01 SBCB-12000-01 SBCB-12250-01 ** Larger Sizes also available



2-7/8" 3" 3-1/4" Pump Section

Standard MSPS-02875-01 MSPS-03000-01 MSPS-03250-01 8 ft MSPS-02878-01 MSPS-03008-01 MSPS-03258-01

Fishneck PBFN-03000-01 PBFN-03000-01 PBFN-03000-01 Pump Barrel


Stroke Rod

Standard PBRO-03000-01 PBRO-03000-01 PBRO-03000-01 8ft PBTO-03000-08 PBTO-03000-08 PBTO-03000-08




2-7/8" 3" 3-1/4" Load Barrel

Standard MBLB-02875-01 MBLB-03000-01 MBLB-03250-01 8ft MBLB-02875-08 MBLB-03000-08 MBLB-03250-08

10ft MBLB-02875-10 MBLB-03000-10 MBLB-03250-10 Crossover SBDPS-02875-01 SBDPS-03000-01 SBDPS-03250-01


Chisel Bottom SBCB-02875-01 SBCB-03000-01 SBCB-03250-01



3-1/2" Pump Section Load Barrel

Standard MSPS-03500-01 Standard MBLB-03500-01 8 ft MSPS-03508-01 8ft MBLB-03500-08

10ft MBLB-03500-10 Fishneck PBFN-03000-01 Crossover SBDPS-03500-01 Pump Barrel

Standard MBPB-3500-01 8ft MBPB-03500-08 Ball Bottom PB2BB-03500-01

Stroke Rod

Standard PBRO-03500-01 Flapper Bottom PBFB-03500-01 8ft PBRO-03500-08

Piston Stop SBPS-03500-01 Chisel Bottom SBCB-03500-01 Valve Hanger MBVH-03500-01 Valve MBVO-03000-01 Brass Piston MBBP-03500-01 Stop Ring SBSR-03000-01


Drive Down Bailer

Drive Down Bailers are simply a top sub, barrel , and Ball Bottom. They are generally used to bail mud and shale. They are run into the mud and then extracted, carrying mud or shale upwell with the tool.

1-1/4" 1-1/2" 1-5/8" 1-3/4"Fishneck OD 1.188" 1.188" 1.375" 1.375"Max OD 1.250" 1.500" 1.625" 1.750"Pin Connection 15/16"-10 15/16"-10 15/16"-10 15/16"-10Length 60.938" 60.875" 60.938" 60.938"



Drive Down Bailer

1-1/4" 1-1/2" 1-5/8" 1-3/4" Assembly DDBBT-11250-01 DDBBT-11500-01 DDBBT-11625-01 DDBBT-11750-01 Top Sub DDTS-01250-11 DDTS-01500-11 DDTS-11625-01 DDTS-11750-01 Barrel SBLB-11250-01 SBLB-01500-11 SBLB-11625-01 MBLB-11750-01 Ball Bottom PB2BB-11250-01 PB2BB-11500-01 PB2BB-11625-01 PB2BB-11750-01

2" 2-1/4" Assembly DDBBT-12000-01 DDBBT-12250-01 Top Sub DDTS-12000-01 DDTS-12250-01 Barrel SBLB-12000-01 SBLB-12250-01 Ball Bottom PB2BB-12000-01 PB2BB-12250-01 ** Coarse Thread Also Available


Sample Bailer

The Sample Bailer functions the same way as a drive down barrel, with a much shorter barrel (typically 18”) It is commonly attached to a tubing end locator to take samples from the well bottom.

1-1/4" 1-1/2" 1-5/8" Assembly SABBT-11250-01 SABBT-11500-01 SABBT-11625-01 Top Sub DDTS-01250-11 DDTS-01500-11 DDTS-11625-01 Barrel SALB-01250-11 SALB-11500-01 SALB-11625-01 Bottom Sub PB2BB-11250-01 PB2BB-11500-01 PB2BB-11625-01 1-3/4" 2" 2-1/4" Assembly SABBT-11750-01 SABBT-12000-01 SABBT-12250-01 Top Sub DDTS-11750-01 DDTS-12000-01 DDTS-12250-01 Barrel SALB-11750-01 SALB-12000-01 SALB-12250-01 Bottom Sub PB2BB-11750-01 PB2BB-12000-01 PB2BB-12250-01


2-Piece Ball Bottoms

The 2 Piece Ball Bottom is an alternative to the normal style Ball Bottom used with the traditional bailers.

Size Part Number

1.500 PB2BBT-01500-01

1.625 PB2BBT-01625-01

1.750 PB2BBT-01750-01


Tubing End Locator

The Tubing End Locator is used to determine the depth of the tubing using a spring loaded finger. The finger catches the end of the tubing when pulled upward, registering as a reading on the weight indicator.

1-1/2" 2", 2-1/2"

Assembly TELO-01500-01 TELO-02025-01

Body TELB-01500-01 TELB-02025-01

Finger TELF-01500-01 TELF-02025-01 Spring TELS-02025-08 TELS-02025-08


Dump Bailer

A dump bailer is used to place small amounts of cement slurry, or similar material, in a wellbore. Typically, the slurry is placed on a plug or similar device that provides a stable platform for the low-volume cement plug.


Hydrostatic Bailer

The hydrostatic bailer is designed to be used when a pump action bailer fails to remove the sand or debris surrounding a subsurface device. The Hydrostatic Bailer consists of a chamber loaded at atmosphere and sealed off. When the bailer reaches the top of the sand, downward jarring shears a pin, causing bottom hole pressure to surge into the chamber, forcing the bailer piston upward. When pressure in the chamber equalizes the bhp, a ball check closes to retain the sand and debris in the chamber.

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 L-1

Section XII Baker Equipment


D-2 Shifting Tool

The D-2 Shifting Tool is used to provide a safe, selective, and controlled method of opening and closing Type TL Circulating Sleeves.

OPERATING GUIDELINES 1.781" 1.810" 1.870" 2.250"

Collet Dia. 1.807" 1.843" 1.906" 2.281" Adjustment Length 15.690" 15.690" 15.690" 16.625" Overall Length 38.250" 38.250" 38.250" 39.375" Fishneck Diameter 1.375" 1.375" 1.375" 1.750"

2.31" 2.75" 2.81"

Collet Dia. 2.343" 2.781" 2.843" Adjustment Length 16.625" 17.125" 17.125" Overall Length 39.375" 39.437" 39.437" Fishneck Diameter 1.750" 2.313" 2.313"


D-2 Shifting Tool 2" 2-1/2" 3"

Assembly 1.781" D2ST-01781-01 2.250" D2ST-02250-01 2.750" D2ST-02750-01 1.810" D2ST-01810-01 2.310" D2ST-02310-01 2.810" D2ST-02810-01 1.870" D2ST-01870-01

Dog Spring (2) B2DS-02030-

08 (2) B2DS-02030-

08 (2) B2DS-02030-

08 Nut BD2N-02000-01 BD2N-02500-01 BD2N-03000-01 Retractor BD2R-02000-01 BD2R-02500-01 BD2R-03000-01 Connect Adjuster BDCA-02000-01 BDCA-02500-01 BDCA-03000-01 Collet 1.781" BDCO-01781-01 2.250" BDCO-02250-01 2.750" BDCO-02750-01 1.810" BDCO-01810-01 2.310" BDCO-02310-01 2.810" BDCO-02810-01 1.870" BDCO-01870-01 Control Sleeve BDCS-02000-01 BDCS-02500-01 BDCS-03000-01


D-2 Shifting Tool 2" 2-1/2" 3"

Dog Retainer BDDR-02000-01 BDDR-02500-01 BDDR-03000-01 Dog Stop (2) BDDS-02000-01 (2) BDDS-02500-01 (2) BDDS-03000-01 Fishneck BDFN-02000-01 BDFN-02500-01 BDFN-03000-01 Mandrel BDIM-02000-01 BDIM-02500-01 BDIM-03000-01 Retainer Sleeve BDRS-02000-01 BDRS-02500-01 BDRS-03000-01 Dog (2) BDSD-02000-01 (2) BDSD-02500-01 (2) BDSD-03000-01 Thread Protector BDTP-02000-01 BDTP-02500-01 BDTP-03000-01 Mandrel Spring D2MS-02000-08 D2MS-02500-08 D2MS-03000-08


“FWG” By-Pass Blanking Plug

The “FWG” By-Pass Blanking Plug allows fluid to by-pass through the side ports when running in the well. Once the plug is locked in the “F” Profile, pressure can be held in either direction. The plug can be equalized and pulled with standard wireline tools.

OPERATING GUIDELINES 1.78" 1.81" 1.87"

No Go Diameter 1.802" 1.865" 1.906" Fishneck Diameter 1.375" 1.375" 1.375" Lock Diameter 1.703" 1.703" 1.703" Overall Length 15.60" 15.60" 15.60" 2.25" 2.31" 2.75" 2.81" No Go Diameter 2.302" 2.365" 2.802" 2.865" Fishneck Diameter 1.750" 1.750" 2.313" 2.313" Lock Diameter 2.156" 2.156" 2.656" 2.656" Overall Length 16.06" 16.06" 16.69" 16.69"


"FWG" Blanking Plug 1.780" 1.810" 1.870" 2.250"

Assembly FWGBT-01780-04 FWGBT-01810-04 FWGBT-01870-04 FWGBT-02250-04 Oring 1 (2) -011 N70 (2) -011 N70 (2) -011 N70 -018 N70 Oring 2 -014 N70 -014 N70 -014 N70 (2) -113 N70 Oring 3 -110 N70 -110 N70 -110 N70 -115 N70 Vee Packing (6) 195-180 (6) 195-181 (6) 195-182 (6) 195-183 Brass Pin BBLP-02000-07 BBLP-02000-07 BBLP-02000-07 BBLP-02500-07 Dog Pin (2) BDPO-02000-01 (2) BDPO-02000-01 (2) BDPO-02000-01 (2) BDPO-02500-01 Dog Spring (2) BDSO-02000-01 (2) BDSO-02000-01 (2) BDSO-02000-01 (2) BDSO-02500-01 Female Adapter (2) BFAO-01780-04 (2) BFAO-01810-04 (2) BFAO-01870-04 (2) BFAO-02250-04 Male Adapter BMAO-01780-04 BMAO-01810-04 BMAO-01870-04 BMAO-02250-04 Split Seg (2) BSPS-02000-04 (2) BSPS-02000-04 (2) BSPS-02000-04 (2) BSPS-02500-04 Washer BWAS-02000-04 BWAS-02000-04 BWAS-02000-04 BWAS-02500-04



Fishneck BWFN-02000-04 BWFN-02000-04 BWFN-02000-04 BWFN-02500-04 G Bottom GBBO-01780-04 GBBO-01810-04 GBBO-01870-04 GBBO-02250-04 G Mandrel GMAN-02000-04 GMAN-02000-04 GMAN-02000-04 GMAN-02500-04 Retainer Ring RETR-02000-01 RETR-02000-01 RETR-02000-01 ***** Stop Ring STRI-02000-04 STRI-02000-04 STRI-02000-04 STRI-02500-04 Tail Plug TAPL-02000-04 TAPL-02000-04 TAPL-02000-04 TAPL-02500-04 W Mandrel WLMO-01860-04 WLMO-01860-04 WLMO-01906-04 WLMO-02250-04 Dogs (2) BLDO-02000-01 (2) BLDO-02000-01 (2) BLDO-02000-01 (2) BLDO-02500-01


"FWG" Blanking Plug

2.310" 2.560" 2.750" 2.810" Assembly FWGBT-02250-04 FWGBT-02560-04 FWGBT-02750-04 FWGBT-02810-04 Oring 1 -018 N70 -018 N70 -018 N70 -018 N70 Oring 2 (2) -113 N70 (2) -113 N70 (2) -113 N70 (2) -113 N70 Oring 3 -115 N70 -115 N70 -115 N70 -115 N70 Vee Packing (6) 195-184 (6) 219-816 (6) 195-185 (6) 195-186 Brass Pin BBLP-02500-07 BBLP-02500-07 BBLP-02500-07 BBLP-02500-07 Dog Pin (2) BDPO-02500-01 (2) BDPO-03000-01 (2) BDPO-03000-01 (2) BDPO-03000-01 Dog Spring (2) BDSO-02500-01 (2) BDSO-03000-01 (2) BDSO-03000-01 (2) BDSO-03000-01 Female Adapter (2) BFAO-02310-04 (2) BFAO-02560-04 (2) BFAO-02750-04 (2) BFAO-02810-04 Male Adapter BMAO-02310-04 BMAO-02560-04 BMAO-02750-04 BFAO-02810-04 Split Seg (2) BSPS-02500-04 (2) BSPS-02500-04 (2) BSPS-02500-04 (2) BSPS-02500-04 Washer BWAS-02500-04 BWAS-03000-04 BWAS-03000-04 BWAS-03000-04



Fishneck BWFN-02500-04 BWFN-02560-04 BWFN-03500-04 BWFN-03500-04 G Bottom GBBO-02310-04 GBBO-02560-04 GBBO-02750-04 GBBO-02810-04 G Mandrel GMAN-02500-04 GMAN-02500-04 GMAN-02500-04 GMAN-02500-04 Stop Ring STRI-02500-04 STRI-02500-04 STRI-02500-04 STRI-02500-04 Tail Plug TAPL-02500-04 TAPL-02500-04 TAPL-02500-04 TAPL-02500-04 W Mandrel WLMO-02310-04 WLMO-02560-04 WLMO-02750-04 WLMO-02810-04 Dogs (2) BLDO-02500-01 (2) BLDO-02500-01 (2) BLDO-03000-01 (2) BLDO-03000-01


“W” Lock Assembly

The “W” Lock Assembly is a no-go lock used in “TF” profiles. It has a no-go shoulder and 2 spring loaded locking dogs to prevent upward and downward movement.

1.781" 1.81" 1.87" 2.25" 2.31" 2.75" 2.81"No Go Diameter 1.802" 1.865" 1.906" 2.302" 2.365" 2.802" 2.865"Fishneck Diameter 1.375" 1.375" 1.375" 1.750" 1.750" 2.313" 2.313"Lock OD 1.703" 1.703" 1.703" 2.188" 2.188" 2.698" 2.698"Overall Length 7.500" 7.500" 7.500" 7.690" 7.690" 8.250" 8.250"



"W" Lock 1.781" 1.810" 1.870" 2.250" Assembly WLABT-01780-04 WLABT-01870-04 WLABT-01906-04 WLABT-02250-04 W Mandrel WLMO-01860-04 WLMO-01860-04 WLMO-01906-04 WLMO-02250-04 Dog Pin (2) BDPO-02000-01 (2) BDPO-02000-01 (2) BDPO-02000-01 (2) BDPO-02500-01 Dog (2) BLDO-02000-01 (2) BLDO-02000-01 (2) BLDO-02000-01 (2) BLDO-02500-01 Dog Spring (2) BDSO-02000-01 (2) BDSO-02000-01 (2) BDSO-02000-01 (2) BDSO-02500-01 2.310" 2.560" 2.750" 2.810" Assembly WLABT-02310-04 WLABT-02560-04 WLABT-02750-04 WLABT-02810-04 W Mandrel WLMO-02310-04 WLMO-02560-04 WLMO-02750-04 WLMO-02810-04 Dog Pin (2) BDPO-02500-01 (2) BDPO-03000-01 (2) BDPO-03000-01 (2) BDPO-03000-01 Dog (2) BLDO-02500-01 (2) BLDO-03000-01 (2) BLDO-03000-01 (2) BLDO-03000-01 Dog Spring (2) BDSO-02500-01 (2) BDSO-03000-01 (2) BDSO-03000-01 (2) BDSO-03000-01


“RZG” By-Pass Blanking Plug

The “RZG” By-Pass Blanking Plug works in the same way as the “FWG”, however the “RZG” does not feature a no-go on the Lock Mandrel. Instead, the no-go is located on the G Bottom.


"RZG" Blanking Plug 2" 2-1/2" 3"

Assembly 1.781" RZGBT-01781-04 2.250" RZGBT-02250-04 2.750" RZGBT-02750-04 1.810" RZGBT-01810-04 2.310" RZGBT-02310-04 2.810" RZGBT-02810-04 1.870" RZGBT-01870-04 Oring 1 (2) -011 N70 -018 N70 -018 N70 Oring 2 -014 N70 (2) -113 N70 (2) -113 N70 Oring 3 -110 N70 -115 N70 -115 N70 Vee Packing (6) 195-180 (6) 195-183 (6) 195-185 Brass Pin BBLP-02000-07 BBLP-02500-07 BBLP-02500-07 Dog Pin (2) BDPO-02000-01 (2) BDPO-02500-01 (2) BDPO-03000-01 Dog Spring (2) BDSO-02000-01 (2) BDSO-02500-01 (2) BDPO-03000-01 Female Adapter (2) BFAO-01780-04 (2) BFAO-02250-04 (2) BFAO-02750-04 Male Adapter BMAO-01780-04 BMAO-02250-04 BMAO-02750-04 Split Seg (2) BSPS-02000-04 (2) BSPS-02500-04 (2) BSPS-02500-04 Washer BWAS-02000-04 BWAS-02500-04 BWAS-03000-04


"RZG" Blanking Plug 2" 2-1/2" 3"

Fishneck BWFN-02000-04 BWFN-02500-04 BWFN-03500-04 G Bottom 1.781" GBBO-01780-04 2.250" GBBO-02250-04 2.750" GBBO-02750-04 1.810" GBBO-01810-04 2.310" GBBO-02310-04 2.810" GBBO-02810-04 1.870" GBBO-01870-04 G Mandrel GMAN-02000-04 GMAN-02500-04 GMAN-02500-04 Retainer Ring RETR-02000-01 ***** ***** Stop Ring STRI-02000-04 STRI-02500-04 STRI-02500-04 Tail Plug TAPL-02000-04 TAPL-02500-04 TAPL-02500-04 W Mandrel ZLMO-02000-04 ZLMO-02500-04 ZLMO-03000-04 Dogs (2) BLDO-02000-01 (2) BLDO-02500-01 (2) BLDO-03000-01


“Z” Lock Assembly “

The “Z” Lock Assembly is similar to the “W” Lock, however it does not have a no-go. The No-Go is located on the packing mandrel.

2" 2-1/2" 3"Max OD 1.750" 2.188" 2.688"Fishneck Diameter 1.375" 1.750" 2.313"Overall Length 7.500" 7.690" 8.250"


2" 2-1/2" 3" Assembly ZLABT-02000-04 ZLABT-02500-04 ZLABT-03000-04 Dog (2) BLDO-02000-01 (2) BLDO-02500-01 (2) BLDO-03000-01 Dog Pin (2) BDPO-02000-01 (2) BDPO-02500-01 (2) BDPO-03000-01 Dog Spring (2) BDSO-02000-01 (2) BDSO-02500-01 (2) BDSO-03000-01 Mandrel ZLMO-02000-04 ZLMO-02500-04 ZLMO-03000-04


“FSG” By-Pass Blanking Plug

The “FSG” Blanking Plug allows fluid to by-pass through the side ports when running in the well. It contains 2 sets of dogs, one set in the upward position, and one set in the downward position, to lock in place against pressure.

1.781" 1.81" 1.87" 2.25" 2.31" 2.75" 2.81"Max OD 1.771" 1.802" 1.865" 2.240" 2.302" 2.740" 2.802"Fishneck OD 1.375" 1.375" 1.375" 1.750" 1.750" 2.313" 2.313"Overall Length 17.22" 17.22" 17.22" 17.759" 17.759" 18.906" 18.906"



"FSG" Blanking Plug 2" 2-1/2" 3"

Assembly 1.780" FSGBT-01780-04 2.250" FSGBT-02250-04 2.750" FSGBT-02750-04 1.810" FSGBT-01810-04 2.310" FSGBT-02310-04 2.810" FSGBT-02810-04 1.870" FSGBT-01870-04 Oring 1 (2) -011 N70 -018 N70 -018 N70 Oring 2 -014 N70 (2) -113 N70 (2) -113 N70 Oring 3 -110 N70 -115 N70 -115 N70 Vee Packing 1.780" (6) 195-180 2.250" (6) 195-183 2.750" (6) 195-185 1.810" (6) 195-181 2.310" (6) 195-184 2.810" (6) 195-186 1.870" (6) 195-182 Brass Pin BBLP-02000-07 BBLP-02500-07 BBLP-03000-07

Dog Pin (4) BDPO-02000-

01 (4) BDPO-02500-

01 (4) BDPO-03000-

01

Dog Spring (4) BDSO-02000-

01 (4) BDSO-02500-

01 (4) BDSO-03000-

01 Female Adapter 1.780" BFAO-01780-04 2.250" BFAO-02250-04 2.750" BFAO-02750-04 1.810" BFAO-01810-04 2.310" BFAO-02310-04 2.810" BFAO-02810-04 1.870" BFAO-01870-04 Male Adapter 1.780" BMAO-01780-04 2.250" BMAO-02250-04 2.750" BMAO-02750-04 1.810" BMAO-01810-04 2.310" BMAO-02310-04 2.810" BMAO-02810-04 1.870" BMAO-01870-04 Split Seg (2) BSPS-02000-04 (2) BSPS-02500-04 (2) BSPS-02500-04 Washer BWAS-02000-04 BWAS-02500-04 BWAS-03000-04


"FSG" Blanking Plug 2" 2-1/2" 3"

Fishneck BSFN-02000-04 BSFN-02500-04 BSFN-03500-04 G Bottom 1.780" GBBO-01780-04 2.250" GBBO-02250-04 2.750" GBBO-02750-04 1.810" GBBO-01810-04 2.310" GBBO-02310-04 2.810" GBBO-02810-04 1.870" GBBO-01870-04 G Mandrel GMAN-02000-04 GMAN-02500-04 GMAN-02500-04 Retainer Ring RETR-02000-01 ***** ***** Stop Ring STRI-02000-04 STRI-02500-04 STRI-02500-04 Tail Plug TAPL-02000-04 TAPL-02500-04 TAPL-02500-04 S Mandrel SLMO-02000-04 SLMO-02500-04 SLMO-03000-04

Dogs (4) BLDO-02000-01

(4) BLDO-02500-01

(4) BLDO-03000-01


“S” Lock

The “S” Lock works in the same way as the “Z” Lock and “W” Lock, however instead of a NoGo, it contains 2 sets of dogs in the upper and lower position to prevent movement.


"S" Lock

2" 2-1/2" 3" Assembly SLABT-02000-04 SLABT-02500-04 SLABT-03000-04 Dog Pin (4) BDPO-02000-01 (4) BDPO-02500-01 (4) BDPO-03000-01 Dog (4) BLDO-02000-01 (4) BLDO-02500-01 (4) BLDO-03000-01 Dog Spring (4) BDSO-02000-01 (4) BDSO-02500-01 (4) BDSO-03000-01 Mandrel SLMO-02000-04 SLMO-02500-04 SLMO-03000-04


“FB-2” Equalizing Check Valve

The FB-2 is a standing valve, which prevents flow from above the tool, allowing fluid flow from below the tool. The No-Go sits in a “TF” Profile, which prevents downward movement. It is not locked into the profile, and it has a built-in equalizing procedure.

1.78" 1.81" 1.87" 2.25" 2.31" 2.75" 2.81"No Go Diameter 1.802" 1.865" 1.906" 2.302" 2.365" 2.802" 2.865"Fishneck Diameter 1.375" 1.375" 1.375" 1.750" 1.750" 2.313" 2.313"Overall Length 15.68" 15.68" 15.68" 17.37" 17.37" 19.81" 19.81"



"FB-2" Check Valve

1.78" 1.81" 1.87" 2.25" Assembly FB2BT-01780-04 FB2BT-01810-04 FB2BT-01870-04 FB2BT-02250-04

Oring 1 (2) -124 V75 (2) -124 V75 (2) -124 V75 (2) -128 V75 Oring 2 -127 V75 -127 V75 -127 V75 -133 V75 Oring 3 -218 V75 -218 V75 -218 V75 -222 V75 Vee Ring (4) 195-180 (4) 195-181 (4) 195-182 (4) 195-183 Female Adapter BFAO-01780-04 BFAO-01810-04 BFAO-01870-04 BFAO-02250-04 Male Adapter BMAO-01780-04 BMAO-01810-04 BMAO-01810-04 BMAO-02250-04 Ball BFBB-02000-01 BFBB-02000-01 BFBB-02000-01 BFBB-02500-01 Equalizing Sleeve BFBE-02000-04 BFBE-02000-04 BFBE-02000-04 BFBE-02500-04 Fishneck BFBF-02000-04 BFBF-02000-04 BFBF-02000-04 BFBF-02500-04 By-pass Mandrel BFBM-02000-04 BFBM-02000-04 BFBM-02000-04 BFBM-02500-04 Ball Seat BFBS-02000-04 BFBS-02000-04 BFBS-02000-04 BFBS-02500-04 Shear Screw (2) FBMS-2 Screw (2) FBMS-2 Screw (2) FBMS-2 Screw (2) FBMS-2 Screw Packing Mandrel FBPM-01780-04 FBPM-01810-04 FBPM-01870-04 FBPM-02250-04 Packing Nut FBPN-01810-04 FBPN-01810-04 FBPN-01870-04 FBPN-02250-04


"FB-2" Check Valve

2.31" 2.56" 2.75" 2.81" Assembly FB2BT-02310-04 FB2BT-02560-04 FB2BT-02750-04 FB2BT-02810-04 Oring 1 (2) -128 V75 (2) -128 V75 (2) -135 V75 (2) -135 V75 Oring 2 -133 V75 -133 V75 -141 V75 -141 V75 Oring 3 -222 V75 -222 V75 -225 V75 -225 V75 Vee Ring (4) 195-184 (4) 219-816 (4) 195-185 (4) 195-186 Female Adapter BFAO-02310-04 BFAO-02560-04 BFAO-02750-04 BFAO-02810-04 Male Adapter BMAO-02310-04 BMAO-02560-04 BMAO-02750-04 BMAO-02810-04 Ball BFBB-02500-01 BFBB-02500-01 BFBB-03500-01 BFBB-03500-01 Equalizing Sleeve BFBE-02500-04 BFBE-02500-04 BFBE-03000-04 BFBE-03000-04 Fishneck BFBF-02500-04 BFBF-02500-04 BFBF-03000-04 BFBF-03000-04 By-pass Mandrel BFBM-02500-04 BFBM-02500-04 BFBM-03000-04 BFBM-03000-04 Ball Seat BFBS-02500-04 BFBS-02500-04 BFBS-03500-04 BFBS-03500-04 Shear Screw (2) FBMS-2 Screw (2) FBMS-2 Screw (4) FBMS-2 Screw (4) FBMS-2 Screw Packing Mandrel FBPM-02310-04 FBPM-02560-04 FBPM-02750-04 FBPM-02810-04 Packing Nut FBPN-02310-04 FBPN-02560-04 FBPN-02810-04 FBPN-02810-04


“RB-2” Equalizing Check Valve

The RB-2 is similar to the FB-2 Check Valve. The RB-2 Packing Mandrel does not have a no-go. The OD of the mandrel sits in the profile.

1.781" 1.81" 1.87" 2.25" 2.31" 2.75" 2.81"Max OD 1.771" 1.802" 1.865" 2.240" 2.302" 2.740" 2.802"Fishneck OD 1.375" 1.375" 1.375" 1.750" 1.750" 2.313" 2.313"Overall Length 17.22" 17.22" 17.22" 17.759" 17.759" 18.906" 18.906"



"RB-2" Check Valve 1.78" 1.81" 1.87" 2.25"

Assembly RB2BT-01780-04 RB2BT-01810-04 RB2BT-01870-04 RB2BT-02250-04 Oring 1 (2) -124 V75 (2) -124 V75 (2) -124 V75 (2) -128 V75 Oring 2 -127 V75 -127 V75 -127 V75 -133 V75 Oring 3 -218 V75 -218 V75 -218 V75 -222 V75 Vee Ring (4) 195-180 (4) 195-181 (4) 195-182 (4) 195-183 Female Adapter BFAO-01780-04 BFAO-01810-04 BFAO-01870-04 BFAO-02250-04 Male Adapter BMAO-01780-04 BMAO-01810-04 BMAO-01810-04 BMAO-02250-04 Ball BFBB-02000-01 BFBB-02000-01 BFBB-02000-01 BFBB-02500-01 Equalizing Sleeve BFBE-02000-04 BFBE-02000-04 BFBE-02000-04 BFBE-02500-04 Fishneck BFBF-02000-04 BFBF-02000-04 BFBF-02000-04 BFBF-02500-04 By-pass Mandrel BFBM-02000-04 BFBM-02000-04 BFBM-02000-04 BFBM-02500-04 Ball Seat BFBS-02000-04 BFBS-02000-04 BFBS-02000-04 BFBS-02500-04 Shear Screw (2) FBMS-2 Screw (2) FBMS-2 Screw (2) FBMS-2 Screw (2) FBMS-2 Screw Packing Mandrel RBPM-01780-04 RBPM-01810-04 RBPM-01870-04 RBPM-02250-04 Packing Nut FBPN-01810-04 FBPN-01810-04 FBPN-01870-04 FBPN-02250-04


"RB-2" Check Valve 2.31" 2.56" 2.75" 2.81"

Assembly RB2BT-02310-04 RB2BT-02560-04 RB2BT-02750-04 RB2BT-02810-04 Oring 1 (2) -128 V75 (2) -128 V75 (2) -135 V75 (2) -135 V75 Oring 2 -133 V75 -133 V75 -141 V75 -141 V75 Oring 3 -222 V75 -222 V75 -225 V75 -225 V75 Vee Ring (4) 195-184 (4) 219-816 (4) 195-185 (4) 195-186 Female Adapter BFAO-02310-04 BFAO-02560-04 BFAO-02750-04 BFAO-02810-04 Male Adapter BMAO-02310-04 BMAO-02560-04 BMAO-02750-04 BMAO-02810-04 Ball BFBB-02500-01 BFBB-02500-01 BFBB-03500-01 BFBB-03500-01 Equalizing Sleeve BFBE-02500-04 BFBE-02500-04 BFBE-03000-04 BFBE-03000-04 Fishneck BFBF-02500-04 BFBF-02500-04 BFBF-03000-04 BFBF-03000-04 By-pass Mandrel BFBM-02500-04 BFBM-02500-04 BFBM-03000-04 BFBM-03000-04 Ball Seat BFBS-02500-04 BFBS-02500-04 BFBS-03500-04 BFBS-03500-04 Shear Screw (2) FBMS-2 Screw (2) FBMS-2 Screw (4) FBMS-2 Screw (4) FBMS-2 Screw Packing Mandrel RBPM-02310-04 RBPM-02560-04 RBPM-02750-04 RBPM-02810-04 Packing Nut FBPN-02310-04 FBPN-02560-04 FBPN-02810-04 FBPN-02810-04


“M” Lock / “F” Lock

The Baker F Lock with packing gland is a top no go lock used in TF type profiles. This lock has a no-go shoulder to prevent downward movement and collet type locking fingers to prevent upward movement. The ID of the lock has relatively smooth, uninterrupted flow path and is excellent for high volume completions. NOTE: When the packing gland and packing unit assembly is made up, the item becomes a M Lock.


No Go Diameter 2.802 2.872 Lock Diameter 2.715 2.715 Latch Mandrel ID 1.850 1.850 Lock Ring ID 1.750 1.750 Packing Mandrel ID 1.500 1.500 Length 23.125 23.125 Fishneck ID 2.31 2.31 Pulling Tool 3" GS 3" GS Probe 3-1/2" M 3-1/2" M Bottom Thread 2.109"-11 1/2 2.109"-11 1/2


“FWB” Bomb Hanger

The “FWB” Bomb Hanger is used to land and lock downhole measuring instruments in “TF” Profiles.




"FWB" Bomb Hanger 1.781" 1.810" 1.870" 2.25"

Assembly FWBBT-01781-04 FWBBT-01810-04 FWBBT-01870-04 FWBBT-02250-04 Dogs (2) BLDO-02000-01 (2) BLDO-02000-01 (2) BLDO-02000-01 (2) BLDO-02500-01 Dog Pins (2) BDPO-02000-01 (2) BDPO-02000-01 (2) BDPO-02000-01 (2) BDPO-02500-01 Dog Springs (2) BDSO-02000-01 (2) BDSO-02000-01 (2) BDSO-02000-01 (2) BDSO-02500-01 Mandrel WLMO-01860-04 WLMO-01860-04 WLMO-01906-04 WLMO-02250-04 Hanger Bottom BIHO-01780-04 BIHO-01802-04 BIHO-01865-04 BIHB-02250-04

2.31" 2.56" 2.75" 2.81" Assembly FWBBT-02310-04 FWBBT-02560-04 FWBBT-02750-04 FWBBT-02810-04 Dogs (2) BLDO-02500-01 (2) BLDO-03000-01 (2) BLDO-03000-01 (2) BLDO-03000-01 Dog Pins (2) BDPO-02500-01 (2) BDPO-03000-01 (2) BDPO-03000-01 (2) BDPO-03000-01 Dog Springs (2) BDSO-02500-01 (2) BDSO-03000-01 (2) BDSO-03000-01 (2) BDSO-03000-01 Mandrel WLMO-02310-04 WLMO-02560-04 WLMO-02750-04 WLMO-02810-04 Hanger Bottom BIHO-02310-04 BIHB-02560-04 BIHB-02750-04 BIHB-02810-04


“RZB” Bomb Hanger

The “RZB” Bomb Hanger works in similar fashion to the “FWG” Bomb Hanger, utilizing a Z-Lock Subassembly.




"RZB" Bomb Hanger 2" 2-1/2" 3"

Assembly 1.78" RZBBT-01780-04 2.25" RZBBT-02250-04 2.75" RZBBT-02750-04 1.81" RZBBT-01810-04 2.31" RZBBT-02310-04 2.81" RZBBT-02810-04 1.87" RZBBT-01870-04 Mandrel ZLMO-02000-04 ZLMO-02500-04 ZLMO-03000-04 Dog (2) BLDO-02000-01 (2) BLDO-02500-01 (2) BLDO-03000-01 Dog Springs (2) BDSO-02000-01 (2) BDSO-02500-01 (2) BDSO-03000-01 Dog Pins (2) BDPO-02000-01 (2) BDPO-02500-01 (2) BDPO-03000-01 Bomb Hanger 1.78" BIHO-01780-04 2.25" BIHB-02250-04 2.75" BIHB-02750-04 1.81" BIHO-01802-04 2.31" BIHB-02310-04 2.81" BIHB-02810-04 1.87" BIHO-01865-04


“FSB” Bomb Hanger

The “FSG” Bomb Hanger performs the same functions as the “FWG” Bomb Hanger, Utilizing an “S” Lock Subassembly.

1.78" 1.81" 1.87" 2.25" 2.31" 2.75" 2.81"Max Diameter 1.771" 1.802" 1.865" 2.240" 2.302" 2.740" 2.802"Overall Length 13.136" 13.136" 13.136" 14.207" 14.207" 14.627" 14.627"Fishneck Diameter 1.375" 1.375" 1.375" 1.750" 1.750" 2.313" 2.313"

Operational Guidelines


FSB Blanking Plug 2" 2-1/2" 3" Assembly 1.78" FSBBT-01780-04 2.25" FSBBT-02250-4 2.75" FSBBT-02750-04 1.81" FSBBT-01810-04 2.31" FSBBT-02310-04 2.81" FSBBT-02810-04 1.87" FSBBT-01870-04 Mandrel SLMO-02000-04 SLMO-02500-04 SLMO-03000-04 Dog (4) BLDO-02000-01 (4) BLDO-02500-01 (4) BLDO-03000-01 Dog Springs (4) BDSO-02000-01 (4) BDSO-02500-01 (4) BDSO-03000-01 Dog Pins (4) BDPO-02000-01 (4) BDPO-02500-01 (4) BDPO-03000-01 Bomb Hanger 1.78" BIHO-01780-04 2.25" BIHB-02250-04 2.75" BIHB-02750-04 1.81" BIHO-01802-04 2.31" BIHB-02310-04 2.81" BIHB-02810-04 1.87" BIHO-01865-04


Disc Bottoms

Disc Bottoms are another form of plug that B&T offers for its Baker line of Locks, including S Locks, W Lock Mandrels, and Z Lock Mandrels.

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 M-1

Section XIII Testing

Equipment


“A” Standing Valve

The “A” Standing Valve is designed to hold pressure from above the tool, for use in intermittent gas lift wells to contain fluid in the tubing during an injection cycle.


"A" Standing Valve 1.781" 1.875" 2.000" 2.313" 2.500" Assembly CASV-01781-02 CASV-01875-02 CASV-02000-02 CASV-02313-02 CASV-02500-02 Retainer Head CARH-02000-02 CARH-02000-02 CARH-02000-02 CARH-02000-02 CARH-02000-02 Pull Skirt CAPS-02000-02 CAPS-02000-02 CAPS-02000-02 CAPS-02500-02 CAPS-02500-02 Ball Housing CABH-02000-02 CABH-02000-02 CABH-02000-02 CABH-02500-02 CABH-02500-02 Ball CASB-02000-01 CASB-02000-01 CASB-02000-01 BFBB-02500-01 BFBB-02500-01 Body CABO-02000-02 CABO-01875-02 CABO-02000-02 CABO-02313-02 CABO-02250-02 Oring (2) -221 N70 (2) -221 N70 (2) -221 N70 (2) -327 N70 (2) -327 N70 Vee Packing (4) 15251 412 (4) 19791 412 (4) 11550 412 (4) 15255 412 (4) 2851 412 Packing Body CAPB-01781-02 CAPB-01875-02 CAPB-02000-02 CAPB-02313-02 CAPB-02250-02


“N” Test Tool

The “N” Test Tool is used to pressure test the tubing above the nipple in which it is set. The tool is designed to hold pressure from above, allowing a modest flow from below the tool.


N Test Tool 1.781" 2.000" 2.125" 2.500"

Assembly NTTBT-01781-01 NTTBT-02000-01 NTTBT-02125-01 NTTBT-02500-09

Seal 0809-0594-1 0809-0594-1 0809-0594-1 0809-0594-1

Oring -113 N90 -113 N90 -113 N90 -113 N90

Packing (6) 91V4413 (6) 91V310 (6) 91V4405 (6) 91V318

Adapter NTTA-01781-09 NTTA-02000-09 NTTA-02125-09 NTTA-02500-09

Cage NTTC-02000-09 NTTC-02000-09 NTTC-02000-09 NTTC-02000-09

Drop NTTD-02000-09 NTTD-02000-09 NTTD-02000-09 NTTD-02000-09

Nut NTTN-02000-09 NTTN-02000-09 NTTN-02000-09 NTTN-02000-09

Packing Nut NTTPN-01781-09 NTTPN-02000-09 NTTPN-02125-09 NTTPN-02500-09

Packing Retainer NTTPR-02000-09 NTTPR-02000-09 NTTPR-02000-09 NTTPR-02000-09

Seal Insert NTTSI-02000-09 NTTSI-02000-09 NTTSI-02000-09 NTTSI-02000-09

Adapter Ring OMAO-01781-09 OMAO-01875-09 OMAO-02125-09 OMAO-02313-09


N Test Tool

3.000" 3.437"

Assembly NTTBT-03000-01 NTTBT-03437-01

Seal 0809-0594-1 0809-0594-1

Oring -113 N90 -113 N90

Packing (6) 91V365 (6) 91V4385

Adapter NTTA-03000-09 NTTA-03437-09

Cage NTTC-02000-09 NTTC-02000-09

Drop NTTD-02000-09 NTTD-02000-09

Nut NTTN-02000-09 NTTN-02000-09

Packing Nut NTTPN-01781-09 NTTPN-03437-09

Packing Retainer NTTPR-02300-09 NTTPR-02000-09

Seal Insert NTTSI-02000-09 NTTSI-02000-09

Adapter Ring OMAO-02750-09 OMAO-03437-09


W Circulating Plug

The W Circulating Plug is a removable check valve that can be installed below a perforation. It may also be used to test tubing from above.


Fishneck OD 1.375 1.375 Length 18.938 19.5 Bottom Thread

15/16"-10

15/16"-10

Running OD 1.859 2.165


W Circulating Plug 2" 2-1/2" 3" Assembly WCPBT-02000-01 WCPBT-02500-01 WCPBT-03000-01 Element 2" W Element 2-1/2" W Element 3" W Element Cage WCCO-02000-01 WCCO-02500-01 WCCO-03000-01 Element Expander WCEE-02000-01 WCEE-02500-01 WCEE-03000-01 Fishneck WCFN-02000-01 WCFN-02500-01 WCFN-03000-01 Lower Sub WCLS-02000-01 WCLS-02500-01 WCLS-03000-01 Main Mandrel WCMM-02000-01 WCMM-02500-01 WCMM-03000-01 Valve WCVO-02000-01 WCVO-02500-01 WCVO-03000-01 Sleeve WLSO-02000-01 WLSO-02500-01 WLSO-03000-01


“BTX” Selective Test Tool

The “BTX” Selective Test Tool (with Ball Check) is used to pressure test the tubing above the nipple in which it is set. The locator assembly on this tool allows the operator the flexibility to locate land and pressure test the tubing from any desired “BTX” landing nipple within the tubing string. If it becomes necessary to leave the test tool down hole, upward jarring will shear two pins that connect the Fishneck to the ball housing. This will allow the tool string to return to the surface. An inside Fishneck on the ball housing of the test tool will allow the test tool to be retrieved with a GS Pulling Tool. B&T also manufactures a N Test Tool Style Top portion for the Selective Test Tool.


Fishneck OD 1.375 1.375 Pin Connection 15/16"-10 15/16"-10 Length 30.609 31.250 Bottom Thread NONE 1" L.P. Keys Expanded 2.194 2.620 OD 1.870 2.305 Ball 7/8" 1 1/4" Shear Pin 1/4" X 1.625" 5/16" X 2.125" Retainer Pin 1/4" X 1.875" 1/4" X 2.375" Set Screw 1/4"-20 X 1/4" 1/4"-20 X 1/4" Internal Fishneck 1.375 1.812


"BTX" Selective Test Tool

1.875 Assembly STTBT-12000-01 Fishneck STTFN-12000-01 Vee Ring (7) 91V310 Keys (2) STTK-02000-01 Oring (3) -213 N90 Lower Key Retainer STTLK-02000-01 Key Springs (2) BSTKS-02025-01 Locator Mandrel STTLM-02000-01 Upper Key Retainer BSTUK-01875-01 Nut STTN-02000-01 Female Adapter OFAO-01875-09 Packing Mandrel STTPM-02000-01 Male Adapter OMAO-11875-09 Spring Housing STTSH-02000-01 Body STTB-12000-01 Dog Spring XLRDS-01875-01 Ball Housing STTBH-12000-01 Locator Dog (2) XLRLD-01875-01 Ball Seat STTBS-12000-01 Split Ring (2) XLRSR-01875-01 Core Spring STTCS-02000-18 Dog Retainer STTDR-02000-01


2.313 Assembly STTBT-12500-01 Fishneck STTFN-12500-01 Vee Ring (7) 91V318 Keys (2) STTK-02500-01 Oring (3) -218 N90 Lower Key Retainer STTLK-02500-01 Key Springs (2) BSTKS-02025-01 Locator Mandrel STTLM-02500-01 Upper Key Retainer BSTUK-02313-01 Nut STTN-02500-01 Female Adapter OFAO-02313-09 Packing Mandrel STTPM-02500-01 Male Adapter OMAO-12313-09 Spring Housing STTSH-02500-01 Body STTB-12500-01 Dog Spring XLRDS-02313-01 Ball Housing STTBH-12500-01 Locator Dog (2) XLRLD-02313-01 Ball Seat STTBS-12500-01 Split Ring (2) XLRSR-02313-01 Core Spring STTCS-02500-18 Dog Retainer STTDR-02500-01

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 N-1

Section XIV BHP Equipment


Soft Release Sub

The Soft Release Sub is made up directly to the upper connection of the Wireline Memory Gauge. This tool is required when setting gauges with other BHP Release Tools. It also acts as a shock absorber when retrieving the gauge from the well.


Whiskered Bomb Hanger

The Whiskered Bomb Hanger can be used to set Wireline Memory Gauges in casing. A whisker spring is used to keep the dogs retracted while the tool string is moving downward. When the whisker spring exits the tubing, it allows the retracted dogs to expand into the locating position. Continued downward movement will allow these dogs to exit the tubing and set in the casing.

SPECIFICATIONS Overall Length 31.500" Top Pin Thread 3/4"-16 Bottom Box Thread 3/4"-16 Max OD 1.500" Cotter Pin 1/8" X 1" Dowel Pin (2) 3/8" X 1.375" Dogs Available for 4-1/2" and 5-1/2" tubing


Whiskered Bomb Hanger 4-1/2" 5-1/2" Assembly 9.5# WBHBT-450X950-01 17# WBHBT-550X17-01 11.6# WBHBT-450X1160-01 20# WBHBT-550X20-01 Top Sub WBHTS-00000-01 WBHTS-00000-01 Top Spring WBHS-00000-01 WBHS-00000-01 Nut WBHN-00000-01 WBHN-00000-01 Upper Adapter WBHUA-00000-01 WBHUA-00000-01 Spring Adapter WBHSA-00000-01 WBHSA-00000-01 Body WBHB-00000-01 WBHB-00000-01 Core Spring (2) WBHCS-00000-01 (2) WBHCS-00000-01 Upper Core WBHUC-00000-01 WBHUC-00000-01 Swivel Arm (2) WBHSWA-00000-01 (2) WBHSWA-00000-01 Upper Dog Grab 9.5# WBHUDG-450X950-01 17# WBHUDG-550X17-01 11.6# WBHUDG-450X1160-01 20# WBHUDG-550X20-01 Lower Dog Grab 9.5# WBHLDG-450X950-01 17# WBHLDG-550X17-01 11.6# WBHLDG-450X1160-01 20# WBHLDG-550X20-01 Arm (2) WBHA-00000-01 (2) WBHA-00000-01 Lower Core WBHLC-00000-01 WBHLC-00000-01 Lower Sub WBHLS-00000-01 WBHLS-00000-01 Whisker Spring WBHWS-00000-01 WBHWS-00000-01

B & T OILFIELD PRODUCTS 2010 Catalog 337-837-5359 O-1

Section XV Miscellaneous

Equipment


O’rings

B & T OILFIELD PRODUCTS provides many different o’rings for all types of environments and sealing applications. Our inventory includes but is not limited to Nitrile, Viton, HSN, Aflas, and Chemraz compounds. We also carry HYTREL Flat backups as well as Contoured Backup Rings on request.

Common Wireline O’rings

Lubricator Orings Cameron Acme Oring

2-1/2" 3" 4" 2" 2-1/2" 3" -340 N90 -345 N90 -348 N90 -228 N90 -232 N90 -238 N90

XX Equalizing Subs 2" 2-1/2" 3" -120 N90 -125 N90 -131 N90

Ball Valve O’rings 1.875 2.125 2.313 2.562 2.750 2.813

-325 N90 -327 N90 Custom Molded -331 N90 -332 N90 Custom Molded B & T also has many custom molded O’rings, including those for A-4 Packoffs, K-3 Packoffs, Stem Sets, as well as some Ball Valve O’rings. Please call us for more information on specific sizes.


Redress Kits

B & T takes all the guesswork out of figuring out which Orings go on which parts. We have developed and maintained an extensive list of Oring Kits, ranging from wireline BOP valves, Oil jars, and X Test Tool Kits. If there is one that you need that is not listed, please call us to see if we have already made it.

Bowen BOP Stem Seal Kits Part Number Pressure Service

44732 5000 PSI 2-1/2" Bowen Hyd. Sing 44734 5000 PSI 2-1/2" Bowen Hyd. Twin 79896 5000 PSI 2-1/2" Bowen Man. Sing 44735 5000 PSI 2-1/2" Bowen Man. Twin 80568 5000 PSI 3" Bowen Hyd. Sing 47196 5000 PSI 3" Bowen Hyd. Twin 44737 5000 PSI 3" Bowen Man. Sing 44739 5000 PSI 3" Bowen Man. Twin 61443 5000 PSI 4 to 4-1/2" Bowen Hyd. 61442 5000 PSI 4 to 4-1/2" Bowen Man. 44748 5000 PSI 5-1/2" Bowen Hyd. Sing 44752 5000 PSI 5-1/2" Bowen Man. Sing 44749 5000 PSI 7" Bowen Hyd. Sing 70644 5000 PSI 7" Bowen Man. Sing 47193 10000 PSI 2-1/2" Bowen Hyd. Sing 47194 10000 PSI 2-1/2" Bowen Hyd. Twin 47195 10000 PSI 3" Bowen Hyd. Sing 77306 10000 PSI 3" Bowen Hyd. Twin 79335 10000 PSI 4 to 4-1/2" Bowen Hyd.

Kits also available for Sour and Hi-Temp Services.

Bowen Hydraulic Jar Kits Part Number Description

11191 1-1/2" Bowen W/L Jar Kit 34760 1-1/2" Hi-Temp Bowen W/L Jar Kit 34761 1-1/4" Hi-Temp Hydr. Oil Jar Kit 11754 1-1/4" Bowen Hydraulic W/L Kit 35106 1-1/8" Hydraulic Jar Kit 34762 1-3/4" Bowen Hi-Temp W/L Jar Kit 15996 1-3/4" Hydraulic Jar Kit 79327 1-3/4" Hydraulic Jar Kit 11553 2-1/8" Bowen Hydraulic W/L Jar 34763 2-1/8" Hi-Temp Hydr. W/L Jar Kit


Redress Kits

TOT BOP Stem Seal Kits Part Number Pressure Service

8009-1015 5000 PSI 3" H2S Man. Seal Kit 8009-1014 5000 PSI 3" Std Man. Seal Kit 8009-1013 10000 PSI 2-1/2" H2S Manual Seal Kit 8009-1012 10000 PSI 2-1/2" Std Man. Seal Kit 8009-1010 5000 PSI 2-1/2" Std Man. Seal Kit

Gas Lift Valve Kits Kit Number Description

BTG1000 1" Gaslift Valve Redress w/ Teflon Rings BTG1000-O 1" Gaslift Valve Redress w/ Orings

BTG1500 1-1/2" Gaslift Valve Redress w/ Teflon


BOP Redress

Outer Seal

Inner Seal

B & T tocks Inner & Outer Seals for most BOP and Line sizes, in many different materials including but not limited to Ni trile, Aflas, HSN, Viton, and Epichlorohdyrin.

Inner Seals Outer Seals Part Number BOP Size Part Number BOP Size

1154- 2-1/2" 1152 2-1/2" 1182- 3" 1180 3" 1149- 4" 1147 4" 1169- 5-1/2" 1170 5-1/2" 1119- 7" 1121 7"


Stuffing Box Packing

B & T provides many types of stuffing box packing as well as blowout plugs, both in standard and viton material.

Stuffing Box for Wireline Applications Part Number Description

SBBT-4NR Low Pressure, High Sealability. Use alone or mix with higher pressure packings. SBBT-4NR is 70 Durometer Nitrile. Crude Oil, Natural Gas, Water, Mild Chemicals. To +275 F. Low Cost

SBBT-Blue SBBT-Black

Medium Pressure Service. From -20 F to +275F. Crude Oil, Natural Gas, Water, Mild-To-Severe Chemical Service. Moderate Cost

SBBT-Tan SBBT-Red

Urethane Packing for High Pressure Service and H2S Service. SBBT-Tan to +200F (Moderate Cost). SBBT-Red to +250 F and extreme pressures.

SBBT-HSN Standard Low-to-Medium Pressure Packing. Standard service to +275 F. Crude Oil, Natural Gas, Water, H2S and Mild to Severe Chemicals.

SBBT-Crown High Pressure Service to +275 F. Crude Oil, Natural Gas, Water, and mild chemical service.

SBBT-Viton Medium Pressure High Temperature Service 0 F to +450 F. Mild-to-Severe Chemical Service.

SBBT-6GR High Pressure Service. From -20 F to +275 F. Crude Oil, Natural Gas, Water, Mild Chemical Service. Internally Lubricated with Graphite.

Other rare stuffing box packings are also available .


Non-Extrusion Rings

Swab Cups

B & T offers a complete selection of non-extrusion rings for lubricator connections.

B & T offers many different sizes and styles of the swab cup. Call to specify the swab cup that best suits your application.


Custom Rubber Parts

Custom Rubber parts are always in stock at B & T. Ranging from G Elements, “W” Elements, Hycar Elements, as well as other packoff elements. And as always a variety of materials is available.

Lo Arc Seals

Size Part Number

1.710 91M1993

2.125 91M1986

2.188 91M1994

2.562 91M2258

3.437 91M2196

3.688 91M2266

G Packoff Elements

Size Part Number

2" 2" G Packoff

2-1/2" 2-1/2" G Packoff

3" 3" G Packoff Element

W Elements

Size Part Number

2" 2" W Element

2-1/2" 2-1/2" W Element

3" 3" W Element

D Hycar

Size Part Number

2" 91T3D

2-1/2" 91T4D

3" 91T8

K-3 Elements

Size Part Number

2" 0809-0633-1

2-1/2" 0807-0697-1

3" 0408-0933-1

PX Prong Grommet

Size Part Number

2" 91M444

2-1/2" 91M448

3" 3" PX Grommet

A-4 Packoff Elements

Size Part Number

2" 2" A-4 Packoff

2-1/2" 2-1/2" A-4 P.O. Element

3" 808M-0328-1


Wellhead Choke Equipment Wellhead chokes are commonly used for production manifolds, wellheads, heaters, critical services, well testing, and well cleanup. B&T is proud to offer accessories for this equipment, including OCT Indicators, Thornhill Craver Indicators, as well as Orings and packing sets.

Indicators Part Number Description

1" Gulfco Gulfoc Craver Indicator

1" MSI 1" MSI Indicator

1" National National Indicator

1" OCT OCT Choke Indicator

1" OCT Aluminum OCT Choke Indicator Aluminum

1" Thornhill Craver Thornhill Craver Indicator

1/2" OCT OCT Choke Indicator

1/2" OCT Aluminum OCT Choke Indicator Aluminum

1/2" Thornhill Craver Thornhill Craver Indicator

2 X 1 CIW CIW Choke Indicator

2 X 1 CIW Aluminum CIW Choke Indicator Aluminum

2 X 3/4 CIW CIW Choke Indicator





3/4" Gray Gray Choke Indicator

3/4" Gray Aluminum Gray Choke Indicator Aluminum

3/4" Gulfco Gulfco Craver Indicator

3/4" MSI MSI Choke Indicator

3/4" MSI Aluminum MSI Indicator

3/4" OCT OCT Choke Indicator

3/4" OCT Aluminum OCT Choke Indicator Aluminum

3/4" TC 15K Unitaper Indicator Indicator for TC 3/4" 15K

3/4" Thornill Craver Thornhill Craver Indicator

3/4" Thornill Craver Aluminum Thornhill Craver Indicator Aluminum


Wellhead Choke Equipment

Packing Sets Weight Part Number

10000# OCT-JW-A 10000#

15000# OCT-JW-A 15000#

JWA Orings Weight Part Number

5000# OCT-JW-A 5000# OR

10000# OCT-JW-A 10000# OR

Retainer Rings Part Number Stainless Steel

RR-137

RR-168

RR-168 SS Yes

RR-175

RR-175 SS Yes

RR-181

RR-181 SS Yes

WH-575-S02

WH-187-S02

HO-200 SS Yes

WHM-0137-S02

WHM-0137-S02SS Yes

WHM-175S02

WHM-200


Line Wiper Rubbers Bowen Line Wiper Rubbers are used to wipe the tool string in traditional braided line applications.

Bowen Line Wipers Size Line Size Part Number

Mini 3/16" 807F-1332-7

Mini 7/32" 807F-1332-1

Mini 1/4" 807F-1332-8

Mini 5/16" 807F-1332-2

Mini 3/8" 807F-1332-3

Mini 1/2" 807F-1332-4

Medium 3/16" 806F-0448-1

Medium 7/32" 806F-0448-2

Medium 1/4" 806F-0448-6

Medium 9/32" 806F-0448-8

Medium 5/16" 806-F-0448-3

Medium 3/8" 806F-0448-7

Medium 7/16" 806F-0448-5

Large 3/16" *

Large 7/32" *

Large 1/4" *

Large 5/16" *

Large 3/8" *

Large 7/16" *

* Specify Large when ordering

Type C and CL are Double E style Line Wipers.

Type C

Type CL

CL Oil Saver Line

Size Part Number

3/16" 3/16" CL Type

7/32" 1006-0516-1

5/16" 1006-0516-2

C Oil Saver Line

Size Part Number

3/16" 3/16" Type C

7/32" 7/32" Type C

5/16" 5/16" Type C


Line Wiper Rubbers

The OS9S is similar to the Bowen Line Wiper, except that it comes as one piece of rubber instead of two halves.

Oil Saver Line Size Part Number

3/16" OS9S 3/16"

7/32" OS9S 7/32"

1/4" OS9S 1/4"

5/16" OS9S 5/16"

3/8" OS9S 3/8"

7/16" OS9S 7/16"

1/2" OS9S 1/2"

The HLWB is another style stripper rubber that B&T carries in stock.

HLWB Stripper Rubber Line Size Part Number

3/8" HLWB-3/8

1/2" SLWB-1/2

9/16" HLWB-9/16

** B&T also provides the clothespin type stripper rubber.


Coiled Tubing Strippers B&T provides many coiled tubing stripper products to suit your needs including Red/Green and Yellow/Blue as well as Energizers and Non-Extrusion Rings. B&T also provides Swivel Packing Kits and Face Seals.

Part Number Description 0848-1971-1 1-1/2" Face Seal 0848-2006-1 2" Face Seal HSN

1" X 3-1/2" CT Stripper YB 1" X 3-1/2" CT Stripper YB 1" X 3-1/2" Non-Extrusion Ring TFE Non Extrusion Ring

1" X 4-1/16" CT Stripper YB 1" X 4-1/16" CT Stripper YB 1-1/2" Swivel Packing Kit - 15K 1-1/2" Swivel Packing Kit - 15K 1-1/2" X 3-1/16" CT Stripper RG 1-1/2" X 3-1/16" CT Stripper RG

1-1/2" X 3-1/16" Non-Extrusion Ring TFE Non-Extrusion Ring 1-1/2" X 3-1/16" X 3/4" TFE Non-Ext Non-Extrusion Rings

1-1/2" X 3-1/2" CT Stripper YB 1-1/2" X 3-1/2" CT Stripper 1-1/2" X 3-1/2" Non-Extrusion Ring TFE Non-Extrusion Ring

1-1/2" X 4" CT Stripper RB 1-1/2" X 4-1/16" CT Stripper RB 1-1/2" X 4" Non-Extrusion Ring TFE Non-Extrusion Ring 1-1/2" X 4-1/16" CT Stripper RG Coil Tubing Stipper 95/80 1-1/2" X 4-1/16" CT Stripper YB 1-1/2" X 4-1/16" CT Stripper YB

1-1/2" X 4-1/16" Non-Extrusion Ring TFE Non-Extrusion Ring 1-1/2" X 5-1/2" CT Stripper YB 1-1/2" X 5-1/2" CT Stripper YB

1-1/2" X 5-1/2" Non-Extrusion Rin TFE Non-Extrusion Ring 1-1/2" X 5-1/2" X 3/4" TFE Non-Ext TFE Non-Extrusion Ring

1-1/4" CT Urethane Pig Balls 1-1/4" CT Urethane Pig Balls 1-1/4" X 3-1/16" CT Stripper RG 1-1/4" X 3-1/16" CT Stripper RG

1-1/4" X 3-1/16" Non-Extrusion Ring TFE Non-Extrusion Ring 1-1/4" X 3-1/2" CT Stripper RG 1-1/4" X 3-1/2" CT Stripper RG 1-1/4" X 3-1/2" CT Stripper YB 1-1/4" X 3-1/2" CT Stripper

1-1/4" X 3-1/2" Non-Extrusion Ring TFE Non-Extrusion Ring 1-1/4" X 4" Non-Extrusion Ring TFE Non-Extrusion Ring 1-1/4" X 4-1/16" CT Stripper RG Coil Tubing Stripper 95/80 1-1/4" X 4-1/16" CT Stripper YB 1-1/4" X 4-1/16" CT Stripper YB

1-1/4" X 4-1/16" Non-Extrusion Ring TFE Non-Extrusion Ring


Line Bushings

Bowen Line Bushings

OS9S Brass

B&T manufactures the OS9S upper and lower brass as well as the Bowen Medium Upper and Lower Bushings. We also offer them in a variety of line sizes and materials including up to 1/2” diameter cable.


Vee Rings

B & T carries an extensive collection of Vee Rings for all applications. We stock all sizes in many different materials, including Neoprene/Kevlar, Moly, Ryton, and Viton.

Camco Vee Rings

Part Number OD Part Number OD

01001-019-04000 ADK 20004-008-04000 1.062 01057-005-04000 1" Gaslift 20006-008-04000 1.375 01302-014-04000 1-1/2" Lower 20065-014-04000 3.813 01302-022-04000 1-1/2" Upper 20068-011-04000 2.81 01304-023-04000 1" TFE 20079-036-04000 5-1/2" 10200-011-04000 1.437 20565-012-04000 5.968 10204-013-04000 1.81 20635-008-04000 1.875 10208-005-04000 2.25 20713-003-04000 2.31 10210-008-04000 2.75 21120-014-04000 2.813 10234-009-04000 2.875 50100-002-04000 1" Gaslift 10242-012-04000 2.31 50305-010-04000 3.625 10260-005-04000 3.688 50335-035-04000 2.578 10266-001-04000 5.937 50571-060-04000 3.375 10269-001-04000 5.75 50643-004-04000 5.375 10274-002-04000 4.437 50657-004-04000 4.375 10337-020-04000 4.125 51057-007-04000 2.625 10349-013-04000 2.713 51491-030-04000 4.625 10605-006-04000 2.188


Vee Rings

Baker Vee Rings OD ID OEM P/N Material OD ID OEM P/N Material

1.790 1.375 191-007 9800 3.750 3.375 229-730 9800 2.250 1.750 191-100 9800 2.125 1.625 249-538 9800 1.250 .750 192-104 9800 2.188 1.750 249-539 9800 1.875 1.500 192-400 9800 2.000 1.625 249-540 9800 1.687 1.187 192-506 9800 4.437 3.813 551-339 9800 1.500 .937 192-622 9800 3.688 3.079 551-512 9800 1.375 .937 192-948 9800 1.256 .744 BTV-125-T TFE .875 .500 193-456 9800 1.437 1.063 BTV-143-R Ryton 1.187 .813 195-174 9800 1.437 1.063 BTV-143-T TFE 1.250 .813 195-175 9800 1.500 1.063 BTV-150-T TFE 1.437 1.063 195-176 9800 1.572 1.117 BTV-156-R Ryton 1.500 1.063 195-177 9800 1.572 1.117 BTV-156-T TFE 1.562 1.187 195-178 9800 1.781 1.437 BTV-178-R Ryton 1.625 1.187 195-179 9800 1.781 1.437 BTV-178-T TFE 1.781 1.437 195-180 9800 1.813 1.437 BTV-181-R Ryton 1.813 1.437 195-181 9800 1.813 1.437 BTV-181-T TFE 1.875 1.437 195-182 9800 1.875 1.437 BTV-187-R Ryton 2.250 1.875 195-183 9800 1.875 1.437 BTV-187-T TFE 2.313 1.875 195-184 9800 2.131 1.860 BTV-212-T TFE 2.750 2.375 195-185 9800 2.250 1.875 BTV-225-R Ryton 2.813 2.375 195-186 9800 2.250 1.875 BTV-225-T TFE 2.18 1.71 1952 9800 2.280 1.875 BTV-228-S 9800 3.813 3.313 195-516 9800 2.280 1.875 BTV-228-T TFE 4.000 3.625 217-028 9800 2.313 1.875 BTV-231-R Ryton 5.953 5.578 217-085 9800 2.313 1.875 BTV-231-T TFE 2.562 2.125 219-816 9800 2.562 2.125 BTV-256-T TFE 3.313 2.875 227-218 9800 2.813 2.375 BTV-281-T TFE

3.133 2.740 BTV-312-T TFE 3.694 3.086 BTV-368-R Ryton 3.816 3.306 BTV-381-R Ryton 4.133 3.617 BTV-412-R Ryton 4.321 3.796 BTV-431-R Ryton 4.570 4.057 BTV-456-R Ryton


Vee Rings

Otis Vee Chart OD ID OEM P/N Material OD ID OEM P/N Material .633 .440 91V4792 TFE 1.769 1.355 91-V-3870 9800 .715 .510 91V4008 Ryton 1.781 1.375 91V304 9800 .719 .505 91V4007 TFE 1.781 1.375 91V4412 Ryton .794 .562 91V4323 Ryton 1.781 1.375 91V4413 TFE .794 .562 91V172 TFE 1.786 1.213 91-V-239 9800 .926 .742 91-V-3308 9800 1.786 1.338 91-V-3952 9800 .931 .750 91V3308 9800 1.789 1.360 91V4412-A Ryton .931 .750 91V3475 TFE 1.875 1.500 91V5264 PEEK .938 .750 91V4827 Ryton 1.875 1.500 91V4410 Ryton .952 .742 91V4077 TFE 1.875 1.500 91V310 9800 1.031 .717 91-V-3589 9800 1.875 1.500 91V4411 TFE 1.031 .713 91V3589 9800 1.880 1.500 91V3306 9800 1.110 .745 91-V-3313 9800 1.884 1.488 91-V-144 472 1.125 .750 91V96 TFE 1.888 1.361 91-V-4270 9800 1.197 .901 91-V-1281 9800 1.911 1.338 91-V-4271 9800 1.245 .931 91-V-345 9800 1.911 1.463 91-V-4274 9800 1.250 .937 91V345 9800 2.00 1.25 91V5195 Ryton 1.250 .937 91V4829 Ryton 2.00 1.25 91V5197 Ryton 1.250 .937 91V3473 TFE 2.00 1.25 91V5196 Ryton 1.263 .925 91-V-3472 9800 2.013 1.486 91-V-3558 9800 1.375 1.000 91V4514 TFE 2.013 1.361 91-V-3441 9800 1.375 1.000 91V4513 Ryton 2.013 1.611 91-V-3923 9800 1.375 1.000 91V3325 9800 2.036 1.463 91-V-3694 9800 1.388 .861 91-V-4004 9800 2.036 1.338 91-V-3693 9800 1.496 1.064 91-V-360 9800 2.036 1.338 91-V-3692 9800 1.500 1.125 91V347 9800 2.036 1.588 91-V-3921 9800 1.500 1.125 91V4331 Ryton 2.036 1.463 91-V-3695 9800 1.500 1.125 91V3618 TFE 2.036 1.588 91-V-3922 9800 1.500 1.063 91V360 9800 2.112 1.745 91-V-3451 9800 1.506 1.113 91-V-3328 9800 2.125 1.750 91V3451 9800 1.513 .986 91-V-4025 9800 2.125 1.750 91V4405 TFE 1.513 1.111 91-V-3522 9800 2.125 1.750 91V5270 PEEK 1.515 1.099 91-V-3687 9800 2.125 1.750 91V4404 Ryton 1.536 .963 91-V-4000 9800 2.139 1.610 91-V-3368 9800 1.552 .865 91-V-31 9800 2.161 1.588 91-V-3702 9800 1.559 1.125 91-V-349 9800 2.177 1.745 91-V-38 9800 1.610 1.184 91-V-346 9800 2.188 1.750 91V5257 PEEK 1.625 1.187 91V4607 Ryton 2.188 1.750 91V38 9800 1.625 1.187 91V346 9800 2.188 1.750 91V4403 Ryton 1.625 1.187 91V4608 TFE 2.188 1.750 91V4402 TFE 1.638 1.111 91-V-4499 9800 2.235 1.879 91-V-63 9800 1.661 1.088 91-V-4501 9800 2.260 1.550 91V324-T TFE 1.710 1.270 91V4414 Ryton 2.263 1.736 91-V-3481 9800 1.710 1.270 91V3378 9800 2.280 1.855 91V5884 TFE 1.710 1.270 91V4415 TFE 2.300 1.871 91-V-318 9800 1.745 1.200 91-V-1216 472 2.313 1.875 91V318 9800 1.763 1.236 91-V-3470 9800 2.313 1.875 91V4309 Ryton 1.766 1.187 91-V-33 9800 2.313 1.875 91V4308 TFE


Otis Vee Chart OD ID OEM P/N Material OD ID OEM P/N Material

2.324 1.865 91-V-370 9800 3.301 2.868 91-V-3317 9800 2.348 1.838 91-V-3699 9800 3.313 2.875 91V4386 Ryton 2.348 1.838 91-V-3700 9800 3.313 2.875 91V3317 9800 2.380 1.875 91V3310 9800 3.313 2.875 91V4387 TFE 2.513 1.986 91-V-3551 9800 3.318 2.873 91-V-3420 9800 2.536 1.963 91-V-3698 9800 3.326 2.863 91-V-1304 9800 2.554 2.233 91-V-3450 9800 3.437 2.938 91V3406 9800 2.562 2.250 91V3450 9800 3.437 2.938 91V4385 TFE 2.562 2.250 91V4400 TFE 3.437 2.938 91V4384 Ryton 2.562 2.250 91V4399 Ryton 3.449 2.923 91-V-3406 9800 2.575 2.244 91-V-1175 9800 3.519 2.855 91-V-4492 9800 2.638 2.236 91-V-3940 9800 3.519 2.980 91-V-4097 9800 2.661 2.213 91-V-242 9800 3.520 3.129 91-V-3446 9800 2.735 1.995 91-V-302 9800 3.536 2.838 91-V-4494 9800 2.735 2.239 91-V-366 9800 3.536 2.963 91-V-1073 9800 2.742 2.355 91-V-3376 9800 3.625 3.313 91V3329 TFE 2.75 2.223 91-V-1122 9800 3.681 3.087 91-V-3334 9800 2.750 2.250 91V366 9800 3.688 3.093 91V4383 TFE 2.750 2.375 91V4396 Ryton 3.688 3.093 91V4382 Ryton 2.750 2.375 91V3376 472 3.688 3.093 91V3334 9800 2.750 2.375 91V4509 472 3.763 3.239 91-V-4022 9800 2.750 2.375 91V4397 TFE 3.769 2.980 91-V-3489 9800 2.763 2.356 91-V-3414 472 3.796 3.302 91-V-320 9800 2.786 2.213 91-V-3710 9800 3.813 3.313 91V320 9800 2.786 1.963 91-V-3708 9800 3.813 3.313 91V4381 TFE 2.800 2.364 91-V-3390 9800 3.813 3.313 91V4380 Ryton 2.805 2.355 91-V-1330 9800 3.824 3.306 91-V-3430 472 2.813 2.375 91V1330 9800 3.894 3.487 91-V-4123 9800 2.813 2.375 91V4395 TFE 3.905 3.349 91-V-4117 9800 2.813 2.375 91V4394 Ryton 4.000 3.500 91V4378 Ryton 2.823 2.357 91-V-1359 472 4.000 3.500 91V4379 TFE 2.823 2.370 91V4584 TFE 4.024 3.474 91-V-3617 9800 2.875 2.375 91V4392 Ryton 4.112 3.619 91-V-3453 9800 2.875 2.375 91V64 9800 4.125 3.625 91V3453 9800 2.875 2.375 91V365 9800 4.125 3.625 91V375 9800 2.875 2.375 91V4393 TFE 4.125 3.625 91V4376 Ryton 2.885 2.364 91-V-365 9800 4.125 3.625 91V3391 472 2.888 2.361 91-V-3371 9800 4.125 3.625 91V4377 TFE 2.911 2.338 91-V-3712 9800 4.137 3.617 91-V-375 9800 3.013 2.671 91-V-3813 9800 4.267 3.731 91-V-3492 9800 3.013 2.236 91-V-3924 9800 4.270 3.733 91-V-4546 9800 3.013 2.486 91-V-3483 9800 4.274 3.599 91-V-3973 9800 3.036 2.463 91-V-3716 9800 4.291 3.584 91-V-3975 9800 3.125 2.656 91V4390 Ryton 4.301 3.808 91-V-3432 9800 3.125 2.656 91V4391 TFE 4.313 3.813 91V4374 Ryton 3.138 2.643 91-V-1265 9800 4.313 3.813 91V4375 TFE 3.255 2.740 91V84 TFE 4.313 3.813 91V3432 9800 3.263 2.736 91-V-3488 9800 4.524 3.724 91-V-3560 9800 3.286 2.713 91-V-3714 9800 4.541 3.709 91-V-3726 9800


Otis Vee Chart OD ID OEM P/N Material

4.546 4.045 91-V-3309 9800 4.562 4.062 91V4372 Ryton 4.562 4.062 91V4373 TFE 4.562 4.062 91V3309 9800 4.749 4.266 91V5066 Ryton 4.753 4.261 91V5067 TFE 4.791 3.959 91-V-3728 9800 4.791 3.959 91-V-3727 9800 4.813 4.313 91V4369 TFE 4.813 4.313 91V4368 Ryton 4.823 4.308 91V83 TFE 4.899 4.350 91-V-4006 9800 5.013 4.236 91-V-3557 9800 5.041 4.218 91-V-3730 9800 5.041 4.208 91-V-3729 9800 5.274 4.725 91-V-5055 9800 5.524 4.725 91-V-3564 9800 5.625 4.990 91V4859 TFE 5.763 5.150 91-V-3910 9800 5.875 5.250 91V4364 TFE 5.875 5.250 91V4365 Ryton 5.963 5.375 91V322 9800 5.963 5.375 91V4362 Ryton 5.963 5.375 91V4363 TFE 5.967 5.369 91-V-322 9800 6.013 5.359 91-V-3628 9800 6.024 5.350 91-V-4286 9800 6.512 5.743 91-V-3959 9800 6.517 5.729 91-V-3605 9800 6.524 5.725 91-V-3670 9800 7.024 6.225 91-V-3552 9800 7.524 6.725 91-V-3624 9800 8.520 7.979 91-V-5089 9800 8.532 7.717 91-V-3537 9800

INDEX # D H

2 Piece Ball Bottom K-16 D Hycar Element O-8 Hay Pulley D-3 2 Step Chisel F-29 D Lock A-2 Heavy Duty Pulling Tool H-24 D Plug B-3 Hydraulic Oil Jar F-14

A D Running Tool G-4 Hydraulic Oil Jar Kits O-3 A Probe I-6 D-2 Shifting Tool L-2 Hydraulic Packing Nut D-9 A Standing Valve M-2 DD Bridge Plug B-5 Hydrostatic Bailer K-19 A Tubing Stop C-8 Disc Bottom L-34 A-1 Tubing Stop C-10 DK Prong I-2 I A-4 Packoff Element O-8 Drive Down Bailer K-13 Impression Block F-22 Accelerator F-30 Dual Flapper Pump Thru B-17 AD2 Tubing Stop C-12 Dump Bailer K-18 J

Adjustable Bow Spring Centralizer F-25 DX Prong I-2 J Latch Soft Release G-10

Aluminum Dummy F-38 JC-3 Running Tool G-7 Anti Blow Up Tool F-27 F JD Pulling Tool H-9 F Collar Stop C-5 JK Running Tool G-18

B F Collar Stop Runnning Tool

C-7 JL Running Tool G-6

B Probe I-6 F Lock L-27 JU Pulling Tool H-13 B Shifting Tool J-2 FB-2 Standing Valve L-21 Bar Clamp D-3 FSB Bomb Hanger L-28 K

Bell Guide H-17 FSG ByPass Plug L-16 K-3 Packoff Element O-8 Blind Box F-19 FWB Bomb Hanger L-28 Knuckle Jar F-14 BO Shifting Tool J-7 FWG ByPass Plug L-5 Knuckle Joint F-13 BOP Redress O-5 BOP Stem Seal Kits O-3 G L Broach F-23 G Packoff Assy C-2 Landing Nipples D-13 Bull Dog Spear H-27 G Packoff Element O-8 Leaded STEM F-10 G Stop Anchor C-4 Line Bushings O-14

C G Stop Running Tool G-19 Line Wiper Rubber O-11 C Plug B-2 GG Fishing Socket H-2 Link Jar F-15 C-1 Running Tool G-2 Go Devil F-26 Lo Arc Seals O-8 Center Spear E-4 GR Adapter H-4 Check Set Tool A-17 GS Pulling Tool H-6 Coiled Tubing Stripper O-13 Counter Wheel D-4 Crossover F-18

M R T M Lock L-27 R Equalizing Sub Assy B-13 Tree Connections D-6 Maxwell Bailer K-5 R Lock A-4 Tubing Centralizer F-34 Measuring Head Assy D-5 R Plug B-13 Tubing End Locator K-17 Mechanical Perferator F-39 R Pulling Prong I-5 Tubing Swedge F-20 R Pulling Tool H-18 Tubular Jar F-17

N R Running Prong I-4

N Test Tool M-4 R Running Tool G-11 V Nipple Locator F-28 Rare Earth Magnet E-9 Vee Rings O-15 Non-Extrusion Ring O-7 RB-2 Standing Valve L-24 Veeder Root Counter D-2 Redress Kits O-4

O Releasing Tool H-28 W

O'rings O-2 Repinning Tool H-28 W Circulating Plug M-7 Right Angle Drive D-2 W Element O-8

P Ring Gauge F-21 W Lock A-11 P Prong I-3 Roller STEM F-12 W Lock (Baker) L-10 Paraffin Scratcher E-8 Rope Socket F-2 W Running Tool G-8

PN Plug B-6 RZB Bomb Hanger L-28 Wellhead Choke Equipment O-9

PR Plug B-7 RZG ByPass Plug L-12 Whiskered Bomb Hanger N-3 Pressure Wheel D-4 Wire Grab E-2 PRS Pulling Tool H-26 S Wire Retriever E-6 PX Plug B-7 S Locator A-10 Wirefinder E-5 PX Prong Grommet O-8 S Lock A-8 Wireline Clamp D-2 S Lock (Baker) L-19

Q S Pulling Tool H-21 X Quick Lock F-37 Sample Bailer K-15 X Equalizing Sub Assy B-13 Quick Union D-7 Sand Bailer K-2 X Lock A-13 Selective Running Tool G-20 X Plug B-13 Shock Absorber F-31 X Pulling Prong I-5 Soft Release Sub N-2 X Running Prong I-4 Spang Jar F-15 X Running Tool G-11 Staff Assembly D-10 X Selective Test Tool M-9 Star Drill F-33 XR Pump Thru B-16 STEM F-8 Stuffing Box Assembly D-10 Z

Stuffing Box Glands D-11 Z Lock L-15 Stuffing Box Packing O-6 Swab Cup O-7 Swivel Joint F-35

b & t oilfield products wireline equipment & tools...

Documents