ccms configuration - adding new filter
TRANSCRIPT
Siemens Operation Handbook CCMS – Adding a New Filter
Document Control
Document Name Access to Terminal Server HostsFile Name Operations Handbook – HPOV – Creating a Filter view.docStatus: In ProcessLast Updated: 11 April 2023Document Version
1.0 - Final
Prepared By Siemens SAP Technology SupportApproved By [AES]
Date
Approved By[SBS]
Date
Revision History
Revision Number Date Author Sections amended or changed
document.doc Version 1.0
Confidential Page 1/5 4/11/2023
Siemens Operation Handbook CCMS – Adding a New Filter
Table of Contents
Document Control...................................................................................................................................1Revision History......................................................................................................................................1System Applicability................................................................................................................................3
document.doc Version 1.0
Confidential Page 2/5 4/11/2023
Siemens Operation Handbook CCMS – Adding a New Filter
System Applicability
Applicable to all systems in the Landscape
Procedure
Login to client 000
Goto Tcode : RZ21
Click on “Properties assigned to Customizing groups” in “Properties” tab.
Click on Display Overview
Search Customizing Group “R3SyslogMscDefaultCusGoup” with Variant ZCCMS_CONFIG_VARIANT
Open in Edit Mode,Click on Tab “Filter”
document.doc Version 1.0
Confidential Page 3/5 4/11/2023
Siemens Operation Handbook CCMS – Adding a New Filter
Click on Change Button
Click Continue
Scrolll Down the Filter list to reach Last Message Filter, Click on Add new Lines
document.doc Version 1.0
Confidential Page 4/5 4/11/2023
Siemens Operation Handbook CCMS – Adding a New Filter
Enter the New Filter in FromID and To ID fields.
Save Data.
document.doc Version 1.0
Confidential Page 5/5 4/11/2023