commercial body fittings 8th edition toolboxes …storage.cbf.uk.com/pdf/toolboxes636.pdfno....

Commercial Body Fittings – 8th Edition

Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]

260 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 Coseley tel +44 (0)121 520 0100 fax +44 (0)121 522 3889 website www.cbf.uk.com e-mail: [email protected]

TOOLBOXES – PLASTIC

Part No. Length(mm)

Height(mm)

Depth(mm) Fixings

Recommended Load Weight

(Standard Fitment)*

Wgt.(kg)

CABX45 450 380 400 Integral 50kg 5.00

CABX52 520 360 360 Integral 50kg 5.00

CABX58 580 400 450 Integral 50kg 7.00

CABX62A 620 360 400 Integral 50kg 6.00

CABX62 620 360 610 see page 261 75kg 8.00

CABX65 650 500 480 see page 261 75kg 9.00

CABX80A 800 500 360 Integral 75kg 9.00

CABX80 800 500 480 see page 261 75kg 11.00

CABX100 1000 500 480 see page 261 75kg 14.00

CABX120 1200 500 480 see page 261 75kg 16.00

ToolboxesPlastic

CABX RANGE

l CABX45, 52, 58, 62A & 80A have integral fixing for fitment directly to the floor of the vehicle

(see dimension chart below)l CABX62, 65, 80, 100 & 120 are better fitted using our support bracketry which ensures heavy loads do not cause damage to the boxl Other colours available to special order (subject to minimum order quantity)l Single handle 3-point locking mechanisml Handle dust coverl All logos are laser engraved as standardl Fully recyclable, chemical resistant, UV stabilised PEl May be incorporated in the sideguard in accordance

with Regulation 73l For fitting kits see page 261

No. CABX/JBXLOCK Replacement Handle Setwgt. 0.22kg

l Suits all Jonesco CABX plastic toolboxesl Supplied with dust coverl Other spares available upon request CABX62A

Ø9.5 B C

A

Integral Fixings

Integral Fixing Dimensions

Part No. A(mm)

B(mm)

C(mm)

CABX45 400 120 230

CABX52 470 120 190

CABX58 530 120 265

CABX62A 570 120 230

CABX80A 740 120 205

CABX45

*Additional load may be carried if a support base shelf is added and the bracketry is reinforced accordingly

All Jonesco plastic toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of UTAC.

A monogramming serviceis available

(Subject to minimum order quantity)

261



TOOLBOXES – PLASTIC TOOLBOXES – PLASTIC

Part No. Length(mm)

Height(mm)

Depth(mm)

Fixings / Mounting

Kit

No. of Handles

Wgt.(kg)

CABJBZ600 600 450 480 Integral 1 6.50

CABJBZ700 700 480 490 see below 2 8.00

CABJBZ900 900 480 490 see below 2 10.50

ToolboxesPlastic

TIGA-BOX RANGEAll Jonesco plastic toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of UTAC.

l Lid sits in a recess to minimize the potential for water ingressl Additional protection through automotive grade rubber seall Lockable with 2 key operated locks as standardl Handles flip up into horizontal position and allow for easy unlocking even with gloves onl Handles flip down into a safety recess preventing them from rotating openl Lid opens 180⁰l No protruding partsl Other colours available to special order (subject to minimum order quantity)l Handles with integrated dust coverl All logos are laser engraved as standardl Fully recyclable, chemical resistant, UV stabilised PEl May be incorporated in the sideguard in accordance with Regulation 73l Passed UTAC side-impact test

Toolbox Part No.

NormalLoads

ExcessiveLoads

CABX62 CABX/KIT26 CABX/KIT27



CABX100 ------------------- CABX/KIT25

CABX120 ------------------- CABX/KIT29

CABJBZ700 ------------------- CABX/KIT35

CABJBZ900 ------------------- CABX/KIT36

CABX/JBH67 CABX/KIT53 -------------------

CABX/JBL67 CABX/KIT53 -------------------

Toolbox Fixing KitsHeavy-Duty 25 x 5mm Flat Black Painted Steel Brackets

l Complete with nut and bolt attachment kit

A monogramming serviceis available

(Subject to minimum order quantity)




TOOLBOXES – PLASTICToolboxes

PlasticCABV RANGE

Document HolderPlastic

All Daken plastic toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of TUV Rheinland.

l All toolboxes supplied with patented Europlex locking ‘T’ handles. Complete with key cover

l Injection moulded polypropylenel Fully sealedl Extremely robust and securel Optional mounting/fitting kits availablel Gas springs available to aid operationl Supplied with up to 3 locking handles, subject to width

No. CAB1005 Black plastic / Screw on capwgt. 0.54kg Size: L320 x 0125mm

l 2 x 08mm pre-threaded holesl Other colours available to orderl Complete with rubber seal & chain

Part No. Length(mm)

Height(mm)

Depth(mm)

No. of Handles

Mounting Kit to Suit

Wgt.(kg)

CABV81000/410BP 410 330 340 1 88010 4.0

CABV81002/500BP 500 350 400 1 88010 6.0

CABV81004/600BP 600 400 500 2 88030 9.0

CABV81006/800BP 800 500 500 2 88030 12.0

CABV81008/1000BP 1000 500 500 3 88030 14.0

Mounting Kits

Part No. To suit

CABV88010/PR 8100081002

CABV88030/PR810048100681008

No. CABV9945/BP Replacement Plastic Europlex handlewgt. 0.28kg

l Suits all CABV plastic toolboxesl Supplied with key coverl Steel version available upon request

Mounting kit

263



TOOLBOXES – PLASTIC TOOLBOXES – PLASTIC / ALUMINIUMStorage Boxes

PlasticCABX RANGE

No. CABX/JBH67 Hinged Lid

No. CABX/JBL67 Detachable Lid

l Supplied with safety lock & 2 keys

No. CABX/JBC40

l Supplied with compartment lock and 2 keys

No. CABX/JBC40T

l Supplied with latchlock that can be locked with a padlock

CABX/JBL67

CABX/JBH67

CABX/JBC40

l Fully sealed enclosurel Robust design/corrosion resistantl 2mm aluminium l ’D’ section seall Stainless steel ‘T’ locking handlesl Interior base mat supplied with all boxes

Part No. Length(mm)

Height(mm)

Depth(mm) Lid Mounting

KitWgt.(kg)

CABX/JBH67 670 305 230 Hinged CABX/KIT53 4.0

CABX/JBL67 670 305 230 Detachable CABX/KIT53 4.0

CABX/JBC40 400 275 330 Hinged --------------- 4.0

CABX/JBC40T 400 275 330 Hinged --------------- 4.0

Part No. Length(mm)

Height(mm)

Depth(mm)

No. of Handles

Wgt.(kg)

CABA450/ACP 450 480 490 1 11.00

CABA600/ACP 600 480 490 1 13.00

CABA800/ACP 800 480 490 1 16.00

CABA1000/ACP 1000 480 490 2 19.00

ToolboxesAluminium Chequer Plate

CABA RANGEManufactured from 2mm aluminium chequer plate, press-formed and welded.

All CABX range storage boxes are manufactured from fully recyclable moulded polyethylene (PE).




TOOLBOXES – STEELToolboxes

SteelCABV25 RANGE

ToolboxesStainless Steel

CABV35 RANGE

l Fully sealed enclosurel Robust design / Robotically formed

and weldedl 1.5mm steel zinc plated/black powder

coatedl Patented Europlex ‘T’ locking handlesl Gas strut kits available

No. CABV9941/BP Replacement Plastic Europlex handlewgt. 0.28kg

l Suits all CABV25 steel toolboxes

l Fully sealed enclosurel Robust design / Robotically formed and

weldedl 1.5mm 304G stainless steell Stainless steel ‘T’ locking handlesl Gas strut kits available l Fully buffed to a matt surface finish

Mounting kit

Mounting kit

Part No. Length(mm)

Height(mm)

Depth(mm)

No. of Handles

Mounting Kit

Wgt.(kg)

CABV2515/500BS 500 350 400 1 CABV9515/PR 12.21

CABV2520/600BS 600 400 500 1 CABV9515/PR 15.21

CABV2525/800BS 800 500 500 2 CABV9520/PR 24.35

CABV2530/1000BS 1000 500 500 2 CABV9520/PR 30.90

CABV2535/1200BS 1200 500 500 2 CABV9520/PR 34.00

CABV2540/1450BS 1450 500 500 2 CABV9520/PR 40.81

Mounting KitsBlack Powder Coated Steel (pair)

Part No. Material Thickness

SizeW x H(mm)

CABV9515/PR 3mm 420 x 160

CABV9520/PR 4mm 520 x 205

CABV9941/BP

Part No. Length(mm)

Height(mm)

Depth(mm)

No. of Handles

Mounting Kit

Wgt.(kg)

CABV3515/500SS 500 350 400 1 CABV9525/PR 12.21

CABV3520/600SS 600 400 500 1 CABV9525/PR 15.21

CABV3525/800SS 800 500 500 2 CABV9530/PR 24.35

CABV3530/1000SS 1000 500 500 2 CABV9530/PR 30.90

CABV3535/1200SS 1200 500 500 2 CABV9530/PR 34.00

CABV3540/1450SS 1450 500 500 2 CABV9530/PR 40.81

Mounting KitsBlack Powder Coated Steel (pair)

Part No. Material Thickness

SizeW x H(mm)

CABV9525/PR 2.5mm 420 x 160

CABV9530/PR 2.5mm 520 x 205

All Bawer CABV25 toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of TUV SUD.

All Bawer CABV35 toolboxes are suited for vehicle fitment and can be incorporated in the side-guard in accordance with UNECE Regulation 73. The required tests were carried out and certified under the supervision of TUV SUD.

commercial body fittings 8th edition toolboxes …storage.cbf.uk.com/pdf/toolboxes636.pdfno....

Documents