drilling – punching – cutting – deburring -...

Index Drilling – Punching – Cutting – Deburring

Rotabest® Metal Core Drilling MachinesPage 4 - 25




Metal Core Drilling – TappingPage 28

Tool Holders/AdaptorsPage 26 / 41

Cutters HSS-CoPage 34 - 37

TCT Cutters-Weldon ShankPage 38 - 39

TCT Cutters ALPage 40

Adaptors/ ExtensionsPage 42

Hydraulic Punching Units single-actingPage 43 - 48

Hydraulic Punching Unitsdouble-actingPage 49

Hydraulic PumpsPage 47- 49

Deburring Devices Page 53 - 59

Bevel Milling MachinePage 60 - 61

Deburring DevicesPage 62 - 65

Deburring DevicesPage 66 - 69

Rotaspeed® Cutting Saw RS 230APage 70 - 73

355 (14“) Super Dry Cut SawPage 74

16“ Super Dry Cut SawPage 75

HSS-Bi-Metal Hole Saws/SetsPage 76 - 80

Bevel Milling Machine TCT-Hole SawsPage 81 - 85

TCT-Hole Saws MBS + MBS ProPage 86 - 89

Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92

Astroflex® Sabre Saw BladesSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95

Battery-packedcompact hydraulic punchPage 96 - 97

Puncher and Puncher SetsPage 98 - 103

Special Puncher04 -

ALFRA – separates the tools from the toys 3

RotabestMetal Core Drilling MachinesPage 4 - 25



Rotabest®Rotabest®RotabestMetal Core Drilling MachinesPage 4 - 25

Metal Core Drilling – TappingPage 28

Tool Holders/AdaptorsPage 26 / 41

Cutters HSS-CoPage 34 - 37Cutters HSS-Co

Rotabest®Rotabest®RotabestMetal Core Drilling Machines



Metal Core Drilling Machines

TCT Cutters-Weldon ShankPage 38 - 39

TCT Cutters ALPage 40

Adaptors/ ExtensionsPage 42

Hydraulic Punching Units single-actingPage 43 - 48

Hydraulic Punching Unitsdouble-actingPage 49


TCT Cutters AL

Hydraulic Punching Units

Hydraulic Punching Units

Adaptors/ Extensions


Rotaspeed®Rotaspeed®RotaspeedCutting Saw RS 230APage 70 - 73

355 (14“) Super Dry Cut SawPage 74

16“ Super Dry Cut SawPage 75

HSS-Bi-Metal Hole Saws/SetsPage 76 - 80

Rotaspeed®Rotaspeed®Rotaspeed

355 (14“) Super Dry Cut Saw

Dry Cut Saw

TCT-Hole SawsPage 81 - 85

TCT-Hole Saws MBS + MBS ProPage 86 - 89

Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92

AstroflexSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95

Battery-packedcompact hydraulic punchPage 96 - 97

Page 98 - 103

Special PuncherPage 104 -

Multi-Step Drills

Astroflex® Astroflex® Astroflex Sabre Saw BladesSabre Saw Blades

Puncher and Puncher SetsPage 98 - 103Puncher and Puncher SetsPuncher and Puncher SetsPage 98 - 103

Special Puncher

Battery-packedcompact hydraulic punch

TCT-Hole Saws MBS + MBS Pro

ALFRA Bevel Milling- and Deburring Devices – OverviewMade in Germany by ALFRA

Type KFH 150 KFH 250 SKF 63-15 KFT 250 KFT 500 KFK

Prod.-No. 25100 25130 25010 25110 25140 25200

Prismsupport L = 6“ / W = 13/16“/1 9/16“ L = 150 mm / W = 20/40 mm

L = 10“ / W = 3“L = 250 mm / W = 70 mm

support guide with rollers9 7/16” x 3 1/8” / 8 11/16” x 2 15/16”

240 x 80 mm / 220 x 75 mm

L = 250 mm/W = 40 mmL = 10“/W = 1-19/16“

L = 500 mm/W = 70 mmL = 20“/W = 2-3/4“

–

EndMillØ Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ indexable inserts Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ Indexable insert holder

Max.BevelWidth3/64“ - 13/64“, depending on material,

with fine adjustment9/16“ depending on material 19/32“ max.

3/64“ - 9/32“ depending on material,with fine adjustment

1/16“ - 9/16“45°: steel 0 – 13/64“, alu 0 – 5/16“ 30°: steel 0 – 5/32“, alu 0 – 15/64“

BevelAngle 45°

continuously 30° - 45° - 30° pivotingleft and right for 60° welding bevels.As well for radii r= 3.0 , 4.0 and 5.0 by means

of radius solid carbide end mills.

15 - 20 - 30 - 45 - 60° adjustable 45° 45°

45°(optional 30°)

Radius R = 2.5

HighPerformanceMotor ■ ■ ■ ■ ■ ■

MotorCapacity 1050 Watt 1800 Watt 1100 Watt 1050 Watt 1800 Watt 1300 Watt

SteplessSpeedControl 8000 up to 25000 rpm 2500 up to 23500 rpm 2870 rpm 8000 up to 25000 rpm 2500 up to 23500 rpm 6000 up to 10.000 rpm with soft start

FullWaveElectronics ■ ■■

with thermal and overload protection ■ ■■

with thermal and overload protection

ColletØ 1-45/64“ – 43 mm 2-31/64“ – 63 mm 1-45/64“ – 43 mm 2-31/64“ – 63 mm –

Voltage 110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

110 V - 50 Hzor 110 V - 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 Hz or 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

Weight 7 lbs./3.5 kg 23 lbs./12.8 kg 46.2 lbs./21 kg 11 lbs./5.0 kg 39 lbs./18 kg 9.2 lbs./4.2 kg

Dimensions(LxWxH) 13.39 3/64 “ x 5.91“ x 4.33“ 18.9“ x 12.4“ x 5.71“ 17.32“ x 7.87“ x 11.02“ 14.17“ x 9.84“ x 4.33“ 17.72“ x 19.69“ x 6.3“ L = 17.72“

CableLength 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m

■ 110 Volt – Prod.-No. 25191.110■ 230 Volt – Prod.-No. 25191 ■ 110 Volt – Prod.-No. 25192.110

■ 230 Volt – Prod.-No. 25192

ALFRA foot switch with female connector (230 V).Running time reduction and motor saving operation.

Function: Foot switch pressed – female connector energized. Foot switch released – Voltage disconnected. Prod.-No. 25116

ALFRA – separates the tools from the toys54

ALFRA Bevel Milling- and Deburring Devices – OverviewMade in Germany by ALFRA

Type KFH 150 KFH 250 SKF 63-15 KFT 250 KFT 500 KFK

Prod.-No. 25100 25130 25010 25110 25140 25200

Prismsupport L = 6“ / W = 13/16“/1 9/16“ L = 150 mm / W = 20/40 mm

L = 10“ / W = 3“L = 250 mm / W = 70 mm

support guide with rollers9 7/16” x 3 1/8” / 8 11/16” x 2 15/16”

240 x 80 mm / 220 x 75 mm

L = 250 mm/W = 40 mmL = 10“/W = 1-19/16“

L = 500 mm/W = 70 mmL = 20“/W = 2-3/4“

–

EndMillØ Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ indexable inserts Solid Carbide acc. to DIN, Ø 5/16“ Solid Carbide acc. to DIN, Ø 7/16“ Indexable insert holder

Max.BevelWidth3/64“ - 13/64“, depending on material,

with fine adjustment9/16“ depending on material 19/32“ max.

3/64“ - 9/32“ depending on material,with fine adjustment

1/16“ - 9/16“45°: steel 0 – 13/64“, alu 0 – 5/16“ 30°: steel 0 – 5/32“, alu 0 – 15/64“

BevelAngle 45°

continuously 30° - 45° - 30° pivotingleft and right for 60° welding bevels.As well for radii r= 3.0 , 4.0 and 5.0 by means

of radius solid carbide end mills.

15 - 20 - 30 - 45 - 60° adjustable 45° 45°

45°(optional 30°)

Radius R = 2.5

HighPerformanceMotor ■ ■ ■ ■ ■ ■

MotorCapacity 1050 Watt 1800 Watt 1100 Watt 1050 Watt 1800 Watt 1300 Watt

SteplessSpeedControl 8000 up to 25000 rpm 2500 up to 23500 rpm 2870 rpm 8000 up to 25000 rpm 2500 up to 23500 rpm 6000 up to 10.000 rpm with soft start

FullWaveElectronics ■ ■■

with thermal and overload protection ■ ■■

with thermal and overload protection

ColletØ 1-45/64“ – 43 mm 2-31/64“ – 63 mm 1-45/64“ – 43 mm 2-31/64“ – 63 mm –

Voltage 110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

110 V - 50 Hzor 110 V - 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 Hz or 60 Hz

110 V, 50 – 60 Hzor 230 V, 50 – 60 Hz

Weight 7 lbs./3.5 kg 23 lbs./12.8 kg 46.2 lbs./21 kg 11 lbs./5.0 kg 39 lbs./18 kg 9.2 lbs./4.2 kg

Dimensions(LxWxH) 13.39 3/64 “ x 5.91“ x 4.33“ 18.9“ x 12.4“ x 5.71“ 17.32“ x 7.87“ x 11.02“ 14.17“ x 9.84“ x 4.33“ 17.72“ x 19.69“ x 6.3“ L = 17.72“

CableLength 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m 10 ft. – 3.0 m

■ 110 Volt – Prod.-No. 25191.110■ 230 Volt – Prod.-No. 25191 ■ 110 Volt – Prod.-No. 25192.110

■ 230 Volt – Prod.-No. 25192

ALFRA foot switch with female connector (230 V).Running time reduction and motor saving operation.

Function: Foot switch pressed – female connector energized. Foot switch released – Voltage disconnected. Prod.-No. 25116


KFH 150GuideHandle

GuidanceRailsofhigh-tensilespecialsteel

High-performancemotorwithdoublebearingmillingspindle

ClampingLeverforquickadjustment

FineAdjustmentofMillingDepth/BevelWidth

End Mills see page 70/71

ALFRA Deburring Devices


ALFRA Deburring Devices – KFH 150Made in Germany by ALFRA

Withthemachinetowardstheworkpiece,whereamachineddeburringistootime-consuming.

Manuallyoperateddeviceforthedeburring(45°)oflargerwork-pieces,profiles,girders,sheetmetals,with90°support.

■ Manuallyoperated,for45°bevels.

■ Optimalguidingandsafeoperation.

■ ForcustomarysolidcarbideendmillsØ5/16“–8mm.

FullWaveElectronics

Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.

TechnicalData:GuideRail45°: L=5-29/32“–150mm W=13/16“/1-37/64“–20/40mmEndMill: SolidCarbideEndMillsacc.toDIN,Ø5/16“Max.BevelWidth: 3/64“-13/64“,dependingonmaterial withfineadjustmentHighPerformanceMotor: withFullWaveElectronicsVoltage: 110Voltor230VoltMotorCapacity: 1050WContinuouslyadjustableSpeed: 8000upto25000rpmCollar-Ø: 1-45/64“–43mmWeight: 7lbs.–3.5kg

Contentsinclude:• ALFRADeburringDeviceKFH150• 1SetGuideRails• 1ColletØ5/16“–8mmandClampingNut• 1OperationManual

Prod.-No.Deburring Device KFH 150 110 Volt 25100.110

Deburring Device KFH 150 230 Volt 25100

Deburring Device KFH 150 (without motor) 25109

Accessories Spare-Guide Rails 25101Madeofhigh-tensilespecialsteelW=40/15mmxL=150mm,1Set=2pieces

Special AccessoriesGuide Rails 25102madeofhigh-gradeplasticsW=40/15mmxL=150mm,1Set=2pieces


KFH 250Ergonomic

GuideHandles

GuidanceRailsmadeofhigh-tensilespecialsteel

Clampingleverforquickadjustment

FineAdjustmentofMill-ingDepth/BevelWidth

30°–45°–30°swivelling

Guidancewheelsfacilitatesthefeed




ALFRA Deburring Devices – KFH 250Made in Germany by ALFRA

Manuallyoperatedmodel,especiallydevelopedfortheprocessingofbevels(visualbevels)andpreparationofweldonlargeright-angledworkpieces.■ Anindispensablehelperinengineeringandsteelconstruction.■Widespeedrangeofvariousmaterials.■ Individualadjustmentofmillingdepth.■ Easyhandlingandguidingthroughaluminiumhead.


High-performancemotorwithdoublebearingmillingspindle

Fine adjustment of milling depth/ bevel width

TechnicalData:GuideRail: L=10“–250mm W=2-49/64“–70mmEndMill-Ø: 15/32“–12mmDIN6527Max.BevelWidth: 9/16“–14mm(dependingonmaterial)Edgeangles: continuouslytraversableby30–45°–30° rightandleft.Alsoforradiir=3.0,4.0,5.0bymeansofRadius-

SolidCarbideEndMillsCapacity: 1800W(TheQualityMotorfordifficult deburringtasks)ContinuouslyadjustableSpeed: 6000upto24000rpmFullWaveElectronics–underload,thespeedgeneratorprovidesapowerreplenishment.Collar-Ø: 2-31/64“–63mmVoltage: 110Voltor230VoltWeight: 23lbs./12.8kg

Contentsinclude:• ALFRADeburringDeviceKFH250,withmillingdepthfineadjustment• 1SetGuideRailswith2SupportRollers• 1ColletØ15/32“–12mmandClampingNut• 1SetOperatingTools• 1OperationManual

Prod.-No.Deburring Device KFH 250 110 Volt 25130.110

Deburring Device KFH 250 230 Volt 25130

Deburring Device KFH 250 (without motor) 25131

GuideRailsandSupportRollersmadeofwear-resistantplasticuponrequest.

Cost reduction:Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.

bearing milling

Fine adjustment of milling depth/ bevel width


ALFRA Bevel Milling Machine

SKF 63-15


ALFRA Bevel Milling Machine – SKF 63-15Made in Germany by ALFRA • For bevel width of max. 15 mm and with a continuously variable angle adjustment 15° - 20° - 30° 45° - 60°

Integrated OFF-switch

2 milling disks and 6 pcs. high speed indexable inserts

■ TheALFRABevelMillingMachinewasespeciallydevelopedforthepreparationofweldsandforthebevellingofmetallicmaterials.

■ Lowweight,enablingtheuniversaluseontheworkpiece.

■ Machineisdesignedforone-handoperationsuitableforthemillingofsteel,chromenickelsteel,castironandnon-ferrousheavymetals.Themachineissetattheedgeoftheworkpieceandmoveablewithslightpressure

(manualfeed).

■ Theconstructionofthemillingdisk,undertheuseofcommer-ciallyavailablecarbidemillingplatesandarotationspeedof2870rpm,guaranteesasteadybevelmillingwithoutvibration.

■ Theguideroller´srailsaremadeofhardenedsteelandguaran-teeconvincingfeedvalues.

■ Easyandsafeoperationbyelectronicswitch-offcontrolintheeventofoverstressingandreclosurepreventingdevice.

■ OFF-buttonintegratedinrighthandle(Illustration).

■ AlsosuitableforthebevellingofpipesfromØ7“–160mmuptoØ16“–390mmbymeansofaspecialaccessory.

■ LargerdiametersuptoØ40“-60“-80“/1000-1500-2000mmuponrequest.

TechnicalData:Voltage: 110Voltor230VoltCapacity: 1100WattSpeed: 2870rpm WiththermalandoverloadprotectionBevelwidth: 19/32–15mmmax.Bevelangle: 15-20-30-45-60°continuouslyadjustableWeight: 46.2lbs.–21kgDimension(LxWxH) 173/8”x713/16”11”–440x200x280mm

Contentsinclude:• BevelMillingMachineSKF63-15• 1setoftools• operationmanual• transportcase

Prod.-No.Bevel Milling Machine SKF 63-15, 110 V, cpl. 110 Volt 25010.110

Bevel Milling Machine SKF 63-15, 230 V, cpl. 230 Volt 25010

Special accessories:Pipe insert for the processing of external bezels on pipes 25014

fromØ6.3“-15.35“(160-390mm)Largerdiametersupto2000mmuponrequest.

Spare Parts:Spare milling head for St.37 Spun 12008 cpl. 25011

Consistingof:2millingdisksand6pcs.highspeedindexableinsertseach

Carbide Milling plates, TiAIN/TiN-PVD multilayer coating 25013Universalforsteelandstainlesssteel,Clearanceangle11°

Carbide Milling plates, TiAIN/TiN-PVD multilayer coating 25010.15036Bforsteel<850N/mm2;stainlesssteel<>900N/mm2,Clearanceangle20°

Carbide Milling plates, high gloss polished 25010.15036CforaluminiumandNE-metals,Clearanceangle11°

Carbide Milling plates, TiAIN/TiN-PVD multilayer coating 25010.15036Eforsteel<1400N/mm2;stainlesssteel<>900N/mm2,Clearanceangle11°

Milling disk assembly device 25019Foraneasyassemblyoftheindexableinserts.


KFT 250

GuidanceRailsmadeofhigh-tensile

specialsteel

High-Performancemotorwithdouble

bearingmillingspindleClampingLeverforquick

adjustmentFineAdjustmentofMill-ingDepth/BevelWidth

ChipCollector

Rubberfeetforsmoothrunningandstability




ALFRA Deburring Devices – KFT 250 (Stationary Model)Made in Germany by ALFRA

SimpleandinexpensiveDeburringDeviceforlighttomediumoperationdemands.

FortherealisationofuniqueouterbevelsurfaceswithSolidCar-bideEndMillsDIN6527whenhobbing,withoutsecondaryburr.


FullWaveElectronics

Position I: Material thicknesses as from 4.5 mm

Position II: Material thicknesses as from 1.0 mm

Foot Switch (optional)

TechnicalData:Deburringrange: Bevelangle45°PrismSupportPositionI: MaterialThicknessesfrom11/64“–4,5mmPositionII: MaterialThicknessesfrom3/64“–1mmPrismSupport: L=10“–250mmGuideRails: W=1-37/64“–40mmMax.BevelWidth: 9/32“–7mm,dependingonmaterial. WhenusingcorrespondingEndMills,speedand

correspondingnumberofcuttingpasses,aswellsuitableforstainlesssteel(brush edgeswithcuttingoil).

Weight: 11lbs.–5.0kgHighPerformanceMotor: 1.050WwithtriplebearingDoublesupportedmillingspindleSpindlebearingwithhighspeedlubricationWheelflangeNorm-Ø: 1-45/64“–43mmContinuouslyadjustableSpeed: 8000-25000rpm

Voltage: 110Voltor230VoltFullWaveElectronics–underload,thespeedgeneratorprovidesapowerreplenishment.

Contentsinclude:• DeburringDeviceKFT250,withfineadjustmentofthemillingdepth• 1SetGuideRails• 1ColletØ5/16“–8mmandClampingNut• 1ChipCollector• 1SetOperatingTools• 1OperationManual

Prod.-No.Deburring Device KFT 250 Stationary Model 110 Volt 25110.110

Deburring Device KFT 250 Stationary Model 230 Volt 25110

Deburring Device KFT 250 Stationary Model (without motor) 25111

Accessories:ALFRA Foot Switch with female connector 230 Volt 25116

Cost reduction:Cost reduction:The bigger part of the End Mill´s cutting range can be used by moving the End Mill in the collet.

Position I: Material thicknesses as from 4.5 mmMaterial thicknesses as from 4.5 mm

Foot Switch (optional)Foot Switch (optional)


KFT 500GuidanceRails

madeofhigh-tensilespecialsteel

High-Performancemotorwithdouble

bearingmillingspindleClampingLeverforquickadjustment

FineAdjustmentofMill-ingDepth/BevelWidth

ChipCollector RubberFeetforsmoothrunningandhighstabil-

ity




ALFRA Deburring Devices – KFT 500 (Stationary Model)Made in Germany by ALFRA

For medium and larger workpieces. Max. bevel width 9/16“ForuniqueouterbevelsurfacesusingSolidCarbideEndMillsDIN6527whenhobbing,withoutsecondaryburr.


Position I:Material thicknesses 6 - 14 mm

Position II: Material thicknesses as from 1.5 mm

Foot Switch (optional)

Exact Deburring by means of self-generating milling cutter

Fine Adjustment of Milling Depth/Bevel Width

TechnicalData:Deburringrange: Bevelangle45°PrismSupportPositionI: MaterialThicknesses15/64“-9/16“–6-14mmPositionII: MaterialThicknessesfrom1/16“–1.5mmGuideRail: L=1911/16“–500mm W=23/4“–70mmMax.BevelWidth: 9/16“–14mm,dependingonmaterial.

WhenusingcorrespondingEndMills,speedandcorrespondingnumberofcuttingpasses,aswellsuitableforstainlesssteel(brush edgeswithcuttingoil).

AlsoforradiiR=3.0,4.0,5.0bymeansofSolidCarbideEndMil

HighPerformanceMotor: 1.800WwithtriplebearingDoublesupportedmillingspindleSpindlebearingwithhighspeedlubricationWheelflange-Ø: 2-31/64“–63mmContinuouslyadjustableSpeed: 6000upto24000rpmVoltage: 110Voltor230VoltFullWaveElectronics–underload,thespeedgeneratorprovidesapowerreplenishment.Weight: 39lbs./18kg

Contentsinclude:• DeburringDeviceKFT500,withfineadjustmentofthemillingdepth• 1SetGuideRails• 1Collet15/32“–12mmØandClampingNutDIN6499• 1ChipCollector• 1SetOperatingTools• 1OperationManual

Prod.-No.Deburring Device KFT 500 Stationary Model 110 Volt 25140.110

Deburring Device KFT 500 Stationary Model 230 Volt 25140

Deburring Device KFT 500 Stationary Model (without motor) 25141

ALFRA Foot Switch with female connector 230 Volt 25116forrunningtimereductionandmotorsparingoperation.Function: FootSwitchpressed:Connectorenergized. FootSwitchreleased:Connectorcutoff.

Position I:Material thicknesses 6 - 14 mmMaterial thicknesses 6 - 14 mm


KFKErgonomichandlewith

ON/OFF-switch

Adjustmentofbevelwidth

Withthermalandoverloadprotection

HighPerformancemotorwithsoftstart

Prod.-No. 25202 Prod.-No. 25203Prod.-No. 25202 Prod.-No. 25203Prod.-No. 25203Prod.-No. 25202

KFKALFRA Deburring Devices


ALFRA Deburring Devices – KFKMade in Germany by ALFRA

Forthedeburringofouterandinneroutlines,smallestboreholediameter25/32“–20mm.

Especiallydevelopedtoproducecleanvisibleedgesandtopreparewelds.

■Tool-lessadjustmentofbevelheight.■ Handyandpowerful.■ Forconstructionsteels,stainlesssteels,aluminiumandother

material.■ Triplecuttinginsertholder.■ BevelAngle45°(30°optionally)■ RadiiR=2.5

Initial Bore as from Ø 25/32“ ; 20 mm

TechnicalData:BevelAngle: 45°(optional30°)BevelWidth45°: Steel0-3/16“–0-5mm400N/mm2continuously Alu0-5/16“–0-8mm250N/mm2continuouslyBevelWidth30°: Steel0-5/32“–0-4mm400N/mm2continuously Alu0-15/64“–0-6mm250N/mm2continuouslyVoltage: 110Vor230VoltCapacity: 1300WContinuouslyadjustableSpeed: 6000upto10.000rpmwithsoftstart WiththermalandoverloadprotectionFeed: manually Weight: 9.2lbs.–4.2kg

Contentsinclude:• KFKDeburringandBevellingDevice • 1pc.MillingTool45°withindexableinserts• 1ToolSet• TransportCase• OperationManual

Prod.-No.Deburring Device KFK – with 45° Spare-Insert Holder 110 Volt 25200.110

Deburring Device KFK – with 45° Spare-Insert Holder 230 Volt 25200

Deburring Device KFK – with 30° Spare-Insert Holder 110 Volt 25201.110

Deburring Device KFK – with 30° Spare-Insert Holder 230 Volt 25201

Accessories:45° Spare-Insert Holder/Radius 2.5 mm (without indexable inserts) 25202

30° Spare-Insert Holder (without indexable inserts) 25203

Guiding Stop for straight outer edges, adjustable 25207

Tools:Indexable inserts ISO TOHX/TOHT 13,47 x 3 coated 25206 Radius-Inserts 2.5 mm 25205

Triple cutting■ Bevel Angle 45° (30° optionally)■ Radii R = 2.5


ALFRA – Carbide Deburring End Mill for KFH 150 – KFT 250Made in USA

ALFRA-Solid Carbide Deburring End MillThese Solid Carbide End Mills were especially developed for perfect deburring tasks.The chips will be moved off the motor spindle in the chip collector or in the chip channels.

■ Solid Carbide End Mill similar to DIN 6527■ Precision type shank Ø 5/16“ – 8 mm■ Total length 2-3/8“ – 60 mm

Prod.-No.Carbide End Mills Ø 5/16“ – 8 mm, 4 cutting edges, 25150End Mill with larger chip spaces,suitable for wide bevels (up to 9/32“ – 7 mm) in soft materials i.e.aluminium–brass–plastics-wood.Universal use in steel, stainless steel up to a bevel width of 13/64“ – 5 mmcoated

Carbide End Mills Ø 5/16“ – 8 mm, 5 cutting edges, 25151suitable for wide bevels (up to 13/64“ – 5 mm).Universal use in steel, stainless steel, non-ferrous metals, plasticscoated

Carbide End Mills Ø 5/16“ – 8 mm, 8 cutting edges, 25152for non-ferrous metals (copper, brass, bronze)as well as short-chipping aluminium alloys.coated

Carbide End Mills Ø 5/16“ – 8 mm, 14 cutting edges, 25153for steel, cast iron and and small bevels in short-chipping non-ferrous metals, as well as for hardened materialscoated

Carbide End Mills Ø 5/16“ – 8 mm, 4 cutting edges, 25154rough toothing, fine knurl. Universal End Mill, for steel, stainless steel whenreducing speed, also for smaller bevel millscoated

Radius Mills R 1.5 – 2.0 – 2.5 for KFH 150 and KFT 250 on request

End Mills for special tasks on request.

Prod.-No.End Mill-Set in plastic packing 25159Content: 5 Carbide End MillsProd.-No. 25150, 25151, 25152, 25153, 25154Ideal for initial equipment.

Prod.-No. 25150

Prod.-No. 25151

Prod.-No. 25152

Prod.-No. 25153

Prod.-No. 25154

Prod.-No. 25159Prod.-No. 25159

MadeintheUSA


ALFRA – Carbide Deburring End Mill for KFH 250 – KFT 500Made in USA

■ Solid Carbide End Mill Precision Type ■ Shank-Ø 15/32“ – 12 mm■ Total length 3-5/32“ – 80 mm

Prod.-No.Carbide End Mill Ø 15/32“ – 12 mm, 3 cutting edges, 25160for long-chipping materials aluminium/copper/plasticsBevel Width up to 9/16“ – 14 mmcoated

Carbide End Mill Ø 15/32“ – 12 mm, 4 cutting edges, 25161for steel/cast iron/stainless steelsBevel Width up to 5/16“ – 8 mmcoated

Carbide End Mill Ø 15/32“ – 12 mm, 6 cutting edges, 25162Universal End Mill for steel/cast iron/stainless steelsBevel Width up to 9/32“ – 7 mmcoated

Carbide End Mill Ø 15/32“ – 12 mm, 4 cutting edges 25163rough toothing for steel / cast iron / stainless steels.For the preparation of weld.Bevel Width up to 9/16“ – 14 mm (with increasing milling depth)coated

Carbide End Mill Ø 15/32“ – 12 mm, 12 cutting edges, 25164for hardened materials, steel/cast iron/stainless steelBevel Width up to 15/64“ – 6 mmcoated

■ Solid Carbide Radius End Mill■ For the chamfering of workpiece edges■ Versatile use. When processing hard materials, radii should be bevelled in separate

work steps with increasing milling depth.■ The middle adjustment of the radius outline towards the edge of the workpiece is

effected by the axial adjustment of the motor in the clamping eye.

Solid Carbide Radius End Mill*, 5 cutting edges, right-hand twist, L = 89 mm

Prod.-No.R 3.0 25165R 4.0 25166R 5.0 25167

*Delivery time upon request.

Solid Carbide End Mills and Radius End Mills 1.5 – 2.0 – 2.5 upon request.

Prod.-No.Carbide End Mill Set in plastic packing 25169Content: 5 End MillsProd.-No. 25160, 25161, 25162, 25163, 25164Ideal as initial equipment.

Versatile use. When processing hard materials, radii should be bevelled in separate

Prod.-No. 25160

Prod.-No. 25161

Prod.-No. 25162

Prod.-No. 25163

Prod.-No. 25164

Prod.-No. 25166/25166/25167


drilling – punching – cutting – deburring -...

Documents